EN
LG logo
Official user manual

LG Electronics 32LD4

220 pages·18.2 MB·Flat Panel Television·PDF·ENDEFRITNLJA
LG Electronics 32LD4
Table of Contents 118 sections Preparation · LCD TV Models : 19/22/26/32LD35**, 19/22/26/32LD34** · LCD TV Models : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33** · LCD TV Models : 32/42/46/52/60LD5*** · … ShowHide
Preparationp.5LCD TV Models : 19/22/26/32LD35**, 19/22/26/32LD34**p.5LCD TV Models : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33**p.18LCD TV Models : 32/42/46/52/60LD5***p.28LED LCD TV Models : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5**p.37External equipment setupp.49Antenna Connectionp.49Connecting with a Component cablep.50Connecting with an HDMI cablep.51Connecting with an HDMI to DVI cablep.52Connecting with a Euro Scart cablep.53Usb setupp.54Connecting with a RF Cablep.54Connecting with a RCA cablep.55Connecting with a D-sub 15 pin cablep.56Insertion of CI Modulep.57Headphone Setupp.57Digital audio out Setupp.58External Equipment WIreless Connectionp.59Supported Display Resolutionp.60Screen Setup for PC modep.61Watching TV / Programme controlp.65Turning on the TVp.65Initializing Setupp.65Programme Selectionp.65Volume Adjustmentp.65Quick Menup.66On Screen Menus Selection and adjustmentp.67Auto programme tuningp.68Cable DTV settingp.73Manual programme Tuningp.74Programme Editp.78CI [Common Interface] Informationp.82Software Updatep.83Picture/Sound testp.85Diagnosticsp.86Product/service informationp.87Simple Manualp.88Selecting the Programme Listp.89Input Listp.91Input Labelp.92Data Servicep.93SIMPLINKp.94AV Modep.98Initializing(Reset to original factory settings)p.99To use a USB devicep.100When connecting a USB devicep.100Movie listp.102Photo listp.113Music listp.123DivX Registration Codep.132Deactivationp.133EPG(Electronic programme guide)(in digital mode)p.134Switch on/off EPGp.135Select a programmep.135Button Function in NOW/NEXT Guide Modep.135Button Function in 8 Day Guide Modep.136Button Function in Date Change Modep.137Button Function in Extended Description Boxp.137Button Function in Record/Remind Setting Modep.138Button Function in Schedule List Modep.139Picture Controlp.140Picture Size (Aspect Ratio) Controlp.140Picture Wizardp.142Energy Savingp.143Preset Picture Settingsp.144Manual Picture Adjustmentp.145Picture Improvement Technologyp.146Expert Picture Controlp.147Picture Resetp.150Trumotionp.151Power Indicatorp.152Mode Settingp.153Demo Modep.154Sound & Language controlp.155Auto Volume Levelerp.155Clear Voice IIp.156Preset Sound Settings-Sound Modep.157Sound Setting Adjustment -User Modep.158Infinite Soundp.158Balancep.159TV Speakers On/ Off Setupp.160DTV Audio Setting (in digital mode only)p.161Selecting Digital Audio outp.162Audio Resetp.163Audio Description (In digital mode only)p.164I/IIp.165Stereo/Dual Reception (In Analogue Mode Only)p.165NICAM Reception (In Analogue Mode Only)p.166Speaker Sound Output Selectionp.166On-Screen Menu Language / Country Selectionp.167Language Selectionp.168Time Settingp.170CLOCK SETUPp.170Auto on/off time settingp.171Sleep Timer settingp.172Parental Control / Ratingsp.173Set Password & Lock Systemp.173Block Programmep.174Parental Control (In Digital Mode only)p.175External Input Blockingp.176Key Lockp.177Teletextp.178Switch on/offp.178SIMPLE Textp.178TOP Textp.179FASTEXTp.179Special Teletext Functionsp.180Digital Teletextp.181Teletext within Digital Servicep.181Teletext in Digital Servicep.181Appendixp.182Troubleshootingp.182Maintenancep.184Product Specificationsp.185IR Codesp.196External Control Device Setupp.197Open source software noticep.204
Page 1 of the LG Electronics 32LD4 user manual — www.lg.com
Page 1 · click to enlarge
Page 1
LG Electronics 32LD4 diagram (page 1)
Fig. 1

ENGLISH

OWNER’S MANUAL LCD TV / LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

www.lg.com

Page 2 of the LG Electronics 32LD4 user manual — (52/60LD5***,
Page 2 · click to enlarge
Page 2

Separate purchase

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV or LCD TV.

LSW400B or LSW400BG or

LSW200BG

LSW100BG

LG Electronics 32LD4 — LSW200BG diagram (page 2)
Fig. 2
LG Electronics 32LD4 — LSW200BG diagram (page 2)
Fig. 3

DSW400BG

LG Electronics 32LD4 — DSW400BG diagram (page 2)
Fig. 4

(19/22/26/32LD3***, 32LD4***, 32LD5***, 19/22/26/32LE3***, 32LE4***, 22/26LE5***, 32LE5***)

(37/42/47LD4***,

42/46LD5***, 37/42LE4***, 37/42/47LE5***)

LG Electronics 32LD4 — (19/22/26/32LD3***, 32LD4***, 32LD5***, 19/22/26/32LE3***, 32LE4***, 22/26LE5***, 32LE5***) diagram (page 2)
Fig. 5

(52/60LD5***,

55LE5***)

(32/42/46/52/60LD5***,

32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or regis- tered trademarks of HDMI Licensing LLC.

Show 5 more labels / short text on this page
Wall Mounting Bracket · LSW200B or · LSW100B or · DSW400B or · Wireless Media Box
Page 3 of the LG Electronics 32LD4 user manual — Table of contents
Page 3 · click to enlarge
Page 3

Table of contents

Preparationp.5LCD TV Models : 19/22/26/32LD35**, 19/22/26/32LD34**p.5LCD TV Models : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33**p.18LCD TV Models : 32/42/46/52/60LD5***p.28LED LCD TV Models : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5**p.37External equipment setupp.49Antenna Connectionp.49Connecting with a Component cablep.50Connecting with an HDMI cablep.51Connecting with an HDMI to DVI cablep.52Connecting with a Euro Scart cablep.53Usb setupp.54Connecting with a RF Cablep.54Connecting with a RCA cablep.55Connecting with a D-sub 15 pin cablep.56Insertion of CI Modulep.57Headphone Setupp.57Digital audio out Setupp.58External Equipment WIreless Connectionp.59Supported Display Resolutionp.60Screen Setup for PC modep.61Watching TV / Programme controlp.65Turning on the TVp.65Initializing Setupp.65Programme Selectionp.65Volume Adjustmentp.65Quick Menup.66On Screen Menus Selection and adjustmentp.67Auto programme tuningp.68Cable DTV settingp.73Manual programme Tuningp.74Programme Editp.78CI [Common Interface] Informationp.82Software Updatep.83Picture/Sound testp.85Diagnosticsp.86Product/service informationp.87Simple Manualp.88Selecting the Programme Listp.89Input Listp.91Input Labelp.92Data Servicep.93SIMPLINKp.94AV Modep.98Initializing(Reset to original factory settings)p.99To use a USB devicep.100When connecting a USB devicep.100Movie listp.102Photo listp.113Music listp.123DivX Registration Codep.132Deactivationp.133EPG(Electronic programme guide)(in digital mode)p.134Switch on/off EPGp.135Select a programmep.135Button Function in NOW/NEXT Guide Modep.135Button Function in 8 Day Guide Modep.136Button Function in Date Change Modep.137Button Function in Extended Description Boxp.137Button Function in Record/Remind Setting Modep.138Button Function in Schedule List Modep.139Picture Controlp.140Picture Size (Aspect Ratio) Controlp.140Picture Wizardp.142Energy Savingp.143Preset Picture Settingsp.144Manual Picture Adjustmentp.145Picture Improvement Technologyp.146Expert Picture Controlp.147Picture Resetp.150Trumotionp.151Power Indicatorp.152Mode Settingp.153Demo Modep.154Sound & Language controlp.155Auto Volume Levelerp.155Clear Voice IIp.156Preset Sound Settings-Sound Modep.157Sound Setting Adjustment -User Modep.158Infinite Soundp.158Balancep.159TV Speakers On/ Off Setupp.160DTV Audio Setting (in digital mode only)p.161Selecting Digital Audio outp.162Audio Resetp.163Audio Description (In digital mode only)p.164I/IIp.165Stereo/Dual Reception (In Analogue Mode Only)p.165NICAM Reception (In Analogue Mode Only)p.166Speaker Sound Output Selectionp.166On-Screen Menu Language / Country Selectionp.167Language Selectionp.168Time Settingp.170CLOCK SETUPp.170Auto on/off time settingp.171Sleep Timer settingp.172Parental Control / Ratingsp.173Set Password & Lock Systemp.173Block Programmep.174Parental Control (In Digital Mode only)p.175External Input Blockingp.176Key Lockp.177Teletextp.178Switch on/offp.178SIMPLE Textp.178TOP Textp.179FASTEXTp.179Special Teletext Functionsp.180Digital Teletextp.181Teletext within Digital Servicep.181Teletext in Digital Servicep.181Appendixp.182Troubleshootingp.182Maintenancep.184Product Specificationsp.185IR Codesp.196External Control Device Setupp.197Open source software noticep.204
Page 4 of the LG Electronics 32LD4 user manual — Table of contents
Page 4 · click to enlarge
Page 4

Table of contents

Preparationp.5LCD TV Models : 19/22/26/32LD35**, 19/22/26/32LD34**p.5LCD TV Models : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33**p.18LCD TV Models : 32/42/46/52/60LD5***p.28LED LCD TV Models : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5**p.37External equipment setupp.49Antenna Connectionp.49Connecting with a Component cablep.50Connecting with an HDMI cablep.51Connecting with an HDMI to DVI cablep.52Connecting with a Euro Scart cablep.53Usb setupp.54Connecting with a RF Cablep.54Connecting with a RCA cablep.55Connecting with a D-sub 15 pin cablep.56Insertion of CI Modulep.57Headphone Setupp.57Digital audio out Setupp.58External Equipment WIreless Connectionp.59Supported Display Resolutionp.60Screen Setup for PC modep.61Watching TV / Programme controlp.65Turning on the TVp.65Initializing Setupp.65Programme Selectionp.65Volume Adjustmentp.65Quick Menup.66On Screen Menus Selection and adjustmentp.67Auto programme tuningp.68Cable DTV settingp.73Manual programme Tuningp.74Programme Editp.78CI [Common Interface] Informationp.82Software Updatep.83Picture/Sound testp.85Diagnosticsp.86Product/service informationp.87Simple Manualp.88Selecting the Programme Listp.89Input Listp.91Input Labelp.92Data Servicep.93SIMPLINKp.94AV Modep.98Initializing(Reset to original factory settings)p.99To use a USB devicep.100When connecting a USB devicep.100Movie listp.102Photo listp.113Music listp.123DivX Registration Codep.132Deactivationp.133EPG(Electronic programme guide)(in digital mode)p.134Switch on/off EPGp.135Select a programmep.135Button Function in NOW/NEXT Guide Modep.135Button Function in 8 Day Guide Modep.136Button Function in Date Change Modep.137Button Function in Extended Description Boxp.137Button Function in Record/Remind Setting Modep.138Button Function in Schedule List Modep.139Picture Controlp.140Picture Size (Aspect Ratio) Controlp.140Picture Wizardp.142Energy Savingp.143Preset Picture Settingsp.144Manual Picture Adjustmentp.145Picture Improvement Technologyp.146Expert Picture Controlp.147Picture Resetp.150Trumotionp.151Power Indicatorp.152Mode Settingp.153Demo Modep.154Sound & Language controlp.155Auto Volume Levelerp.155Clear Voice IIp.156Preset Sound Settings-Sound Modep.157Sound Setting Adjustment -User Modep.158Infinite Soundp.158Balancep.159TV Speakers On/ Off Setupp.160DTV Audio Setting (in digital mode only)p.161Selecting Digital Audio outp.162Audio Resetp.163Audio Description (In digital mode only)p.164I/IIp.165Stereo/Dual Reception (In Analogue Mode Only)p.165NICAM Reception (In Analogue Mode Only)p.166Speaker Sound Output Selectionp.166On-Screen Menu Language / Country Selectionp.167Language Selectionp.168Time Settingp.170CLOCK SETUPp.170Auto on/off time settingp.171Sleep Timer settingp.172Parental Control / Ratingsp.173Set Password & Lock Systemp.173Block Programmep.174Parental Control (In Digital Mode only)p.175External Input Blockingp.176Key Lockp.177Teletextp.178Switch on/offp.178SIMPLE Textp.178TOP Textp.179FASTEXTp.179Special Teletext Functionsp.180Digital Teletextp.181Teletext within Digital Servicep.181Teletext in Digital Servicep.181Appendixp.182Troubleshootingp.182Maintenancep.184Product Specificationsp.185IR Codesp.196External Control Device Setupp.197Open source software noticep.204
Page 5 of the LG Electronics 32LD4 user manual — A-1
Page 5 · click to enlarge
Page 5

PREPARATION

LCD TV MODELS : 19/22/26/32LD35**, 19/22/26/32LD34**

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — PREPARATION diagram (page 5)
Fig. 6

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 5)
Fig. 7

This item is not included for all models.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polish- ing cloth.

(AAA)

Polishing Cloth Polishing cloth for use on the screen.

Do not use excessive force. This may cause scratching or discoloura- tion.

Ferrite Core (This item is not included

for all models.)

Bolts for stand assembly Protection Cover

1-screw for stand fixing

Use of ferrite core (This feature is not available for all models.)

LG Electronics 32LD4 — Use of ferrite core (This feature is not available for all models.) diagram (page 5)
Fig. 8 · Use of ferrite core (This feature is not available f…

Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.

Install the power plug closely.

A-1

Show 8 more labels / short text on this page
Owner’s Manual Batteries · Remote Control · Power Cord · Only 19/22LD35**, 19/22LD34** · Cable Holder · Protection Cover · Only 26/32LD35**, 26/32LD34** · (M4x20)
Page 6 of the LG Electronics 32LD4 user manual — A-2
Page 6 · click to enlarge
Page 6

PREPARATION

FRONT PANEL CONTROLS

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The energy consumed during use can be significantly reduced if the level of brightness of the

PREPARATION

picture is reduced, and this will reduce the overall running cost.

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall. ►Do not drag the TV. The floor or the product may be damaged.

  • Image shown may differ from your TV.

VOLUME MENU POWER

LG Electronics 32LD4 — VOLUME MENU POWER diagram (page 6)
Fig. 9

OK INPUT

PROGRAMME

LG Electronics 32LD4 — OK INPUT diagram (page 6)
Fig. 10
LG Electronics 32LD4 — OK INPUT diagram (page 6)
Fig. 11

PROGRAMME

VOLUME

OK

MENU

INPUT

SPEAKER

POWER

LG Electronics 32LD4 — PROGRAMME diagram (page 6)
Fig. 12
  • Illuminates red in standby mode.
  • Illuminates blue when the TV is switched on.

A-2

Show 4 more labels / short text on this page
Only 19/22LD35**, 19/22LD34** · Only 26/32LD35**, 26/32LD34** · Remote Control Sensor · Power/Standby Indicator
Page 7 of the LG Electronics 32LD4 user manual — A-3
Page 7 · click to enlarge
Page 7

BACK PANEL INFORMATION

Only 19/22LD35**, 19/22LD34**

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 19/22LD35**, 19/22LD34** diagram (page 7)
Fig. 13 · Only 19/22LD35**, 19/22LD34**
LG Electronics 32LD4 — Only 19/22LD35**, 19/22LD34** diagram (page 7)
Fig. 14 · Only 19/22LD35**, 19/22LD34**

PREPARATION

2 3 4 6 7 5

LG Electronics 32LD4 — PREPARATION diagram (page 7)
Fig. 15

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

Component Input Connect a component video/audio device to these jacks.

RGB IN Input Connect the output from a PC.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

RGB/DVI Audio Input Connect the audio from a PC or DTV.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

Audio/Video Input Connect audio/video output from an external device to these jacks.

Headphone Socket Plug the headphone into the headphone socket.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

A-3

Page 8 of the LG Electronics 32LD4 user manual — A-4
Page 8 · click to enlarge
Page 8

PREPARATION

Only 26LD35**, 26LD34**

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 26LD35**, 26LD34** diagram (page 8)
Fig. 16 · Only 26LD35**, 26LD34**
LG Electronics 32LD4 — Only 26LD35**, 26LD34** diagram (page 8)
Fig. 17 · Only 26LD35**, 26LD34**

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 8)
Fig. 18

2 3 4 5 6

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

RGB IN Input Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

Antenna Input Connect antenna or cable to this jack.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

USB Input Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

Headphone Socket Plug the headphone into the headphone socket.

Component Input Connect a component video/audio device to these jacks.

Audio/Video Input Connect audio/video output from an external device to these jacks.

A-4

Page 9 of the LG Electronics 32LD4 user manual — A-5
Page 9 · click to enlarge
Page 9

Only 32LD35**, 32LD34**

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 32LD35**, 32LD34** diagram (page 9)
Fig. 19 · Only 32LD35**, 32LD34**

PREPARATION

2 3 4 5 6

LG Electronics 32LD4 — PREPARATION diagram (page 9)
Fig. 20

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

RGB IN Input Connect the output from a PC.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Headphone Socket Plug the headphone into the headphone socket.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

Audio/Video Input Connect audio/video output from an external device to these jacks.

Component Input Connect a component video/audio device to these jacks.

A-5

Page 10 of the LG Electronics 32LD4 user manual — A-6
Page 10 · click to enlarge
Page 10

PREPARATION

STAND INSTALLATION

  • Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

PREPARATION

Only 19/22LD35**, 19/22LD34**

Only 26/32LD35**, 26/32LD34**

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

LG Electronics 32LD4 — PREPARATION diagram (page 10)
Fig. 21
LG Electronics 32LD4 — PREPARATION diagram (page 10)
Fig. 22

Assemble the parts of the Stand Body with the Stand Base of the TV. 2

LG Electronics 32LD4 — PREPARATION diagram (page 10)
Fig. 23

Assemble the TV as shown. 2

LG Electronics 32LD4 — Assemble the TV as shown. 2 diagram (page 10)
Fig. 24 · Assemble the TV as shown. 2
LG Electronics 32LD4 — Assemble the TV as shown. 2 diagram (page 10)
Fig. 25 · Assemble the TV as shown. 2

Assemble the TV as shown.

LG Electronics 32LD4 — Assemble the TV as shown. 2 diagram (page 10)
Fig. 26 · Assemble the TV as shown. 2
LG Electronics 32LD4 — Assemble the TV as shown. 2 diagram (page 10)
Fig. 27 · Assemble the TV as shown. 2

Fix the 4 bolts securely using the holes in the back of the TV.

LG Electronics 32LD4 — Assemble the TV as shown. 2 diagram (page 10)
Fig. 28 · Assemble the TV as shown. 2

A-6

Stand Body · Stand Base

Page 11 of the LG Electronics 32LD4 user manual — A-7
Page 11 · click to enlarge
Page 11

NOT USING THE DESK-TYPE STAND

  • Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover.

Only 19/22LD35**, 19/22LD34**

Only 26/32LD35**, 26/32LD34**

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

Insert the Protection Cover into the TV until clicking sound.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 11)
Fig. 29
LG Electronics 32LD4 — PREPARATION diagram (page 11)
Fig. 30
LG Electronics 32LD4 — PREPARATION diagram (page 11)
Fig. 31

Loose the bolts from TV. 2

LG Electronics 32LD4 — Loose the bolts from TV. 2 diagram (page 11)
Fig. 32 · Loose the bolts from TV. 2
LG Electronics 32LD4 — Loose the bolts from TV. 2 diagram (page 11)
Fig. 33 · Loose the bolts from TV. 2

Detach the stand from TV. 3

LG Electronics 32LD4 — Detach the stand from TV. 3 diagram (page 11)
Fig. 34 · Detach the stand from TV. 3
LG Electronics 32LD4 — Detach the stand from TV. 3 diagram (page 11)
Fig. 35 · Detach the stand from TV. 3

Insert the Protection Cover into the TV. After removing the protection paper from the protection cover, adhere it to the TV as shown. 4

LG Electronics 32LD4 — Detach the stand from TV. 3 diagram (page 11)
Fig. 36 · Detach the stand from TV. 3
LG Electronics 32LD4 — Detach the stand from TV. 3 diagram (page 11)
Fig. 37 · Detach the stand from TV. 3

A-7

Protection Cover · Protection Cover

Page 12 of the LG Electronics 32LD4 user manual — A-8
Page 12 · click to enlarge
Page 12

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

  • Image shown may differ from your TV.

Only 19/22LD35**, 19/22LD34**

Only 26/32 LD35**, 26/32 LD34**

After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.

Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 1

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 12)
Fig. 38
LG Electronics 32LD4 — PREPARATION diagram (page 12)
Fig. 39
LG Electronics 32LD4 — PREPARATION diagram (page 12)
Fig. 40

Open the Cable Management Clip as shown. 2

LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 12)
Fig. 41 · Open the Cable Management Clip as shown. 2
LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 12)
Fig. 42 · Open the Cable Management Clip as shown. 2

Fit the Cable Management Clip as shown. 3

LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 12)
Fig. 43 · Fit the Cable Management Clip as shown. 3
LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 12)
Fig. 44 · Fit the Cable Management Clip as shown. 3

NOTE ►Do not use the Cable Management Clip to lift

the TV. - If the TV is dropped, you may be injured or the

TV may be damaged.

A-8

Cable Holder · Cable Management Clip

Page 13 of the LG Electronics 32LD4 user manual — A-9
Page 13 · click to enlarge
Page 13

SWIVEL STAND (Except for 19/22LD35**, 19/22LD34**)

ATTACHING THE TV TO A DESK (Only 26/32 LD35**, 26/32 LD34** )

  • Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
  • Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 13)
Fig. 45
LG Electronics 32LD4 — PREPARATION diagram (page 13)
Fig. 46

1-Screw ( provided as parts of the product)

LG Electronics 32LD4 — PREPARATION diagram (page 13)
Fig. 47

POSITIONING YOUR DISPLAY (Only 19/22LD35**, 19/22LD34**)

LG Electronics 32LD4 — POSITIONING YOUR DISPLAY (Only 19/22LD35**, 19/22LD34**) diagram (page 13)
Fig. 48 · POSITIONING YOUR DISPLAY (Only 19/22LD35**, 19/22LD3…
  • Image shown may differ from your TV.
  • Adjust the position of the panel in various ways

for maximum comfort.

WARNING

  • Tilt range
LG Electronics 32LD4 — WARNING diagram (page 13)
Fig. 49

►To prevent TV from falling over, the TV

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

A-9

Stand · Desk

Page 14 of the LG Electronics 32LD4 user manual — A-10
Page 14 · click to enlarge
Page 14

PREPARATION

CAREFUL INSTALLATION ADVICE

KENSINGTON SECURITY SYSTEM

  • This feature is not available for all models.
  • You should purchase necessary components
  • Image shown may differ from your TV.

to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kens- ington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note- book PCs and LCD projectors.

possibility of it falling when pushed. ■ The instructions shown below are a safer way

PREPARATION

to set up the TV, by fixing it to the wall, avoid- ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

LG Electronics 32LD4 — PREPARATION diagram (page 14)
Fig. 50

2 2 1 1

LG Electronics 32LD4 — 2 2 1 1 diagram (page 14)
Fig. 51

NOTE

►The Kensington Security System is an optional

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

accessory.

►If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

►Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

LG Electronics 32LD4 — NOTE diagram (page 14)
Fig. 52

►Avoid touching the LCD screen or holding your

finger(s) against it for long periods of time. Doing so may produce some temporary distor- tion effects on the screen.

LG Electronics 32LD4 — NOTE diagram (page 14)
Fig. 53

Use a sturdy rope to tie the product for align- ment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

NOTE

►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large

enough to support the size and weight of the TV.

►To use the TV safely make sure that the height of

the bracket on the wall and on the TV is the same.

A-10

Page 15 of the LG Electronics 32LD4 user manual — A-11
Page 15 · click to enlarge
Page 15
  • The TV can be installed in various ways such as

NOTE

on a wall, or on a desktop etc. ■The TV is designed to be mounted horizontally.

►Should Install wall mount on a solid wall per-

EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to tele- phone wires, lightening rods or gas pipes.

pendicular to the floor. ►Should use a special wall mount, if you want

to install it to ceiling or slanted wall. ►The surface that wall mount is to be mount-

ed on should be of sufficient strength to sup- port the weight of TV set; e.g. concrete, nat- ural rock, brick and hollow block. ►Installing screw type and length depends on

PREPARATION

the wall mount used. Further information, refer to the instructions included with the mount. ►LG is not liable for any accidents or damage

LG Electronics 32LD4 — PREPARATION diagram (page 15)
Fig. 54

to property or TV due to incorrect installa- tion: - Where a non-compliant VESA wall mount

is used. - Incorrect fastening of screws to surface

DESKTOP PEDESTAL INSTALLATION

which may cause TV to fall and cause per- sonal injury. - Not following the recommended Installation

method.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — DESKTOP PEDESTAL INSTALLATION diagram (page 15)
Fig. 55

For adequate ventilation allow a clearance of 10 cm all around the TV.

LG Electronics 32LD4 — DESKTOP PEDESTAL INSTALLATION diagram (page 15)
Fig. 56

10 cm 10 cm

LG Electronics 32LD4 — DESKTOP PEDESTAL INSTALLATION diagram (page 15)
Fig. 57

WALL MOUNT: HORIZONTAL INSTALLATION

  • We recommend the use of a LG Brand wall

Model VESA (A * B)

mounting bracket when mounting the TV to a wall. ■We recommend that you purchase a wall mount-

19/22LD35** 26/32LD35** 19/22LD34** 26/32LD34**

100 * 100 200 * 100 100 * 100 200 * 100

M4

4

ing bracket which supports VESA standard. ■LG recommends that wall mounting be per-

formed by a qualified professional installer.

A-11

Show 11 more labels / short text on this page
Power Supply · Circuit breaker · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · Standard · Screw Quantity
Page 16 of the LG Electronics 32LD4 user manual — A-12
Page 16 · click to enlarge
Page 16

PREPARATION

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

( POWER)

Switches the TV on from standby or off to standby.

LG Electronics 32LD4 — ( POWER) diagram (page 16)
Fig. 58

ENERGY

Adjust the Energy Saving mode of the TV.(► p.95)

SAVING

PREPARATION

AV MODE

It helps you select and set images and sounds when connecting AV devices.(► p.50)

INPUT

External input mode rotate in regular sequence.(► p.43)

TV/RAD

Selects Radio, TV and DTV channel.

0 to 9 number button

Selects a programme. Selects numbered items in a menu.

Displays the programme table. (► p.41)

LIST

Q.VIEW

Returns to the previously viewed programme.

MENU

Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(► p.19)

GUIDE

Shows programme guide.(► p.86)

Q. MENU

Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(► p.18)

BACK

Allows the user to move return one step in an inter- active application, EPG or other user interaction function. Clears all on-screen displays and returns to TV viewing from any menu.

EXIT

Shows the present screen information.

THUMBSTICK

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

OK

Accepts your selection or displays the current mode.

These buttons are used for teletext (on TELETEXT models only), Programme edit.

TELETEXT

These buttons are used for teletext. For further details, see the ‘Teletext’ section.(► p.130)

BUTTONS

SUBTITLE

Recalls your preferred subtitle in digital mode.

A-12

Show 4 more labels / short text on this page
INFO i · (Up/Down/Left/Right) · Coloured · buttons
Page 17 of the LG Electronics 32LD4 user manual — A-13
Page 17 · click to enlarge
Page 17

VOLUME UP

Adjusts the volume.

/DOWN

FAV

Displays the selected favourite programme.

PREPARATION

MARK

Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.

RATIO

Selects your desired Aspect Ratio of picture. (► p.92)

MUTE

Switches the sound on or off.

Selects a programme.

UP/DOWN

PAGE UP/

Move from one full set of screen information to the next one.

DOWN

SIMPLINK / MY MEDIA Menu control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List and Music List).

See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(► p.46)

Installing Batteries

LG Electronics 32LD4 — Installing Batteries diagram (page 17)
Fig. 59 · Installing Batteries
  • Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -). ■Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones. ■Close cover.

  • To remove the batteries, perform the installation actions in

reverse.

A-13

Programme

Page 18 of the LG Electronics 32LD4 user manual — A-14
Page 18 · click to enlarge
Page 18

PREPARATION

LCD TV MODELS : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33**

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

PREPARATION

  • Image shown may differ from your TV.

This item is not included for all models.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polish- ing cloth.

Polishing Cloth Polishing cloth for use on the screen.

Do not use excessive force. This may cause scratching or discoloura- tion.

Ferrite Core (This item is not included

for all models.)

(M4x24) (Only 32/37/ 42/47LD42**, 26/32LD32**, 26/32LD33**)

(M4x20) (Only 32/37/ 42/47LD45**)

1-screw for stand fixing (Only 32/37/42LD4***,

26/32LD32**, 26/32LD33**)

Bolts for stand assembly

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.

Install the power plug closely.

A-14

Show 6 more labels / short text on this page
Owner’s Manual Batteries · (AAA) Remote Control · Power Cord · or · Protection · Cover
Page 19 of the LG Electronics 32LD4 user manual — A-15
Page 19 · click to enlarge
Page 19

FRONT PANEL CONTROLS

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The energy consumed during use can be significantly reduced if the level of brightness of the

PREPARATION

picture is reduced, and this will reduce the overall running cost.

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall. ►Do not drag the TV. The floor or the product may be damaged.

Only 32/37/42/47LD45**

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 32/37/42/47LD45** diagram (page 19)
Fig. 60 · Only 32/37/42/47LD45**
LG Electronics 32LD4 — Only 32/37/42/47LD45** diagram (page 19)
Fig. 61 · Only 32/37/42/47LD45**

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

SPEAKER

LG Electronics 32LD4 — PROGRAMME diagram (page 19)
Fig. 62
  • Illuminates red in standby mode.
  • Illuminates blue when the TV is switched on.

A-15

Remote Control Sensor · Power/Standby Indicator

Page 20 of the LG Electronics 32LD4 user manual — A-16
Page 20 · click to enlarge
Page 20

PREPARATION

Only 32/37/42/47LD42**, 26/32LD32**, 26/32LD33**

PREPARATION

VOLUME MENU POWER

LG Electronics 32LD4 — PREPARATION diagram (page 20)
Fig. 63

PROGRAMME

OK INPUT

LG Electronics 32LD4 — PROGRAMME diagram (page 20)
Fig. 64

Only 32/37/42/47LD42**, 32LD32**, 32LD33**

LG Electronics 32LD4 — PROGRAMME diagram (page 20)
Fig. 65

PROGRAMME

VOLUME

SPEAKER

OK

LG Electronics 32LD4 — PROGRAMME diagram (page 20)
Fig. 66

MENU

INPUT

POWER

Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.

A-16

Only 26LD32**, 26LD33** · Remote Control Sensor

Page 21 of the LG Electronics 32LD4 user manual — A-17
Page 21 · click to enlarge
Page 21

BACK PANEL INFORMATION

  • Image shown may differ from your TV.
LG Electronics 32LD4 — BACK PANEL INFORMATION diagram (page 21)
Fig. 67

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 21)
Fig. 68

2 3 4 5 6

LG Electronics 32LD4 — PREPARATION diagram (page 21)
Fig. 69

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

RGB IN Input Connect the output from a PC.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Headphone Socket Plug the headphone into the headphone socket.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

Audio/Video Input Connect audio/video output from an external device to these jacks.

Component Input Connect a component video/audio device to these jacks.

A-17

Page 22 of the LG Electronics 32LD4 user manual — A-18
Page 22 · click to enlarge
Page 22

PREPARATION

STAND INSTALLATION

  • Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

PREPARATION

Only 32/37/42/47LD45**

Only 32/37/42/47LD42**, 26/32LD32**, 26/32LD33**

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 70
LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 71

Assemble the parts of the Stand Body with the Cover Base of the TV. 2

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 72

Assemble the TV as shown.

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 73
LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 74

Assemble the TV as shown.

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 75
LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 76

Fix the 4 bolts securely using the holes in the back of the TV.

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 77

Fix the 4 bolts securely using the holes in the back of the TV.

LG Electronics 32LD4 — PREPARATION diagram (page 22)
Fig. 78

A-18

Stand Body · Cover Base

Page 23 of the LG Electronics 32LD4 user manual — A-19
Page 23 · click to enlarge
Page 23

BACK COVER FOR WIRE ARRANGEMENT

ATTACHING THE TV TO A DESK (Only 32/37/42LD4***, 26/32LD32**, 26/32LD33**)

  • Image shown may differ from your TV.
  • Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 23)
Fig. 79

Open the Cable Management Clip as shown. 2

1-Screw ( provided as parts of the product)

LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 23)
Fig. 80 · Open the Cable Management Clip as shown. 2
LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 23)
Fig. 81 · Open the Cable Management Clip as shown. 2
LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 23)
Fig. 82 · Open the Cable Management Clip as shown. 2

Fit the Cable Management Clip as shown. 3

LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 23)
Fig. 83 · Fit the Cable Management Clip as shown. 3

WARNING

►To prevent TV from falling over, the TV

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

NOTE ►Do not use the Cable Management Clip to lift

NOT USING THE DESK-TYPE STAND

the TV. - If the TV is dropped, you may be injured or the

TV may be damaged.

  • Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover.
LG Electronics 32LD4 — NOTE ►Do not use the Cable Management Clip to lift diagram (page 23)
Fig. 84 · NOTE ►Do not use the Cable Management Clip to lift
LG Electronics 32LD4 — NOTE ►Do not use the Cable Management Clip to lift diagram (page 23)
Fig. 85 · NOTE ►Do not use the Cable Management Clip to lift

Insert the Protection Cover into the TV until clicking sound. Protection Cover

A-19

Stand · Cable Management Clip · Desk

Page 24 of the LG Electronics 32LD4 user manual — A-20
Page 24 · click to enlarge
Page 24

PREPARATION

CAREFUL INSTALLATION ADVICE

KENSINGTON SECURITY SYSTEM

  • This feature is not available for all models.
  • You should purchase necessary components
  • Image shown may differ from your TV.

to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kens- ington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note- book PCs and LCD projectors.

possibility of it falling when pushed. ■ The instructions shown below are a safer way

PREPARATION

to set up the TV, by fixing it to the wall, avoid- ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

►The Kensington Security System is an

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

optional accessory. ►If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ►Some minute dot defects may be visible on

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. ►Avoid touching the LCD screen or holding

your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

LG Electronics 32LD4 — NOTE diagram (page 24)
Fig. 86

Use a sturdy rope to tie the product for align- ment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

NOTE

►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large

enough to support the size and weight of the TV. ►To use the TV safely make sure that the

height of the bracket on the wall and on the TV is the same.

A-20

10 cm

Page 25 of the LG Electronics 32LD4 user manual — A-21
Page 25 · click to enlarge
Page 25
  • The TV can be installed in various ways such as

on a wall, or on a desktop etc. ■The TV is designed to be mounted horizontally.

NOTE

►Should Install wall mount on a solid wall per-

pendicular to the floor. ►Should use a special wall mount, if you want to

EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

install it to ceiling or slanted wall. ►The surface that wall mount is to be mounted

on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. ►Installing screw type and length depends on

PREPARATION

the wall mount used. Further information, refer to the instructions included with the mount. ►LG is not liable for any accidents or damage to

LG Electronics 32LD4 — PREPARATION diagram (page 25)
Fig. 87

property or TV due to incorrect installation: - Where a non-compliant VESA wall mount is

used. - Incorrect fastening of screws to surface

which may cause TV to fall and cause per- sonal injury. - Not following the recommended Installation

DESKTOP PEDESTAL INSTALLATION

method.

  • Image shown may differ from your TV.

For adequate ventilation allow a clearance of 10 cm all around the TV.

LG Electronics 32LD4 — DESKTOP PEDESTAL INSTALLATION diagram (page 25)
Fig. 88

10 cm 10 cm 10 cm

Model VESA (A * B)

WALL MOUNT: HORIZONTAL INSTALLATION

32LD4*** 37/42/47LD4*** 26/32LD32** 26/32LD33**

200 * 100 200 * 200 200 * 100 200 * 100

M4 M6 M4 M4

4

  • We recommend the use of a LG Brand wall

SWIVEL STAND

mounting bracket when mounting the TV to a wall. ■We recommend that you purchase a wall

  • Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

mounting bracket which supports VESA stan- dard. ■LG recommends that wall mounting be per-

formed by a qualified professional installer.

A-21

Show 10 more labels / short text on this page
Power Supply · Circuit breaker · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · Standard · Screw Quantity
Page 26 of the LG Electronics 32LD4 user manual — A-22
Page 26 · click to enlarge
Page 26

PREPARATION

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

Switches the TV on from standby or off to standby.

( POWER)

ENERGY

Adjust the Energy Saving mode of the TV.(► p.95)

SAVING

PREPARATION

AV MODE

It helps you select and set images and sounds when connecting AV devices.(► p.50)

INPUT

External input mode rotate in regular sequence.(► p.43)

TV/RAD

Selects Radio, TV and DTV channel.

0 to 9 number button

Selects a programme. Selects numbered items in a menu.

LIST

Displays the programme table. (► p.41)

Q.VIEW

Returns to the previously viewed programme.

MENU

Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(► p.19)

GUIDE

Shows programme guide.(► p.86)

Q. MENU

Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(► p.18)

BACK

Allows the user to move return one step in an inter- active application, EPG or other user interaction function. Clears all on-screen displays and returns to TV viewing from any menu.

EXIT

Shows the present screen information.

THUMBSTICK

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

OK

Accepts your selection or displays the current mode.

These buttons are used for teletext (on TELETEXT models only), Programme edit.

TELETEXT

These buttons are used for teletext. For further details, see the ‘Teletext’ section.(► p.130)

BUTTONS

SUBTITLE

Recalls your preferred subtitle in digital mode.

A-22

Show 4 more labels / short text on this page
INFO i · (Up/Down/Left/Right) · Coloured · buttons
Page 27 of the LG Electronics 32LD4 user manual — A-23
Page 27 · click to enlarge
Page 27

VOLUME UP

Adjusts the volume.

/DOWN

FAV

Displays the selected favourite programme.

PREPARATION

MARK

Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.

RATIO

Selects your desired Aspect Ratio of picture. (► p.92)

MUTE

Switches the sound on or off.

Selects a programme.

UP/DOWN

PAGE UP/

Move from one full set of screen information to the next one.

DOWN

SIMPLINK / MY MEDIA Menu control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List and Music List).

See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(► p.46)

Installing Batteries

LG Electronics 32LD4 — Installing Batteries diagram (page 27)
Fig. 89 · Installing Batteries
  • Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -). ■Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones. ■Close cover.

  • To remove the batteries, perform the installation actions in

reverse.

A-23

Programme

Page 28 of the LG Electronics 32LD4 user manual — A-24
Page 28 · click to enlarge
Page 28

PREPARATION

ACCESSORIES LCD TV MODELS : 32/42/46/52/60LD5***

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — PREPARATION diagram (page 28)
Fig. 90

PREPARATION

This item is not included for all models.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Polishing Cloth Polishing cloth for use on the screen.

Do not use exces- sive force. This may cause scratching or discolouration.

Ferrite Core (This item is not included

for all models.)

Bolts for stand assembly

1-screw for stand fixing (Only 32/42LD5***)

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.

Install the power plug closely.

A-24

Show 7 more labels / short text on this page
Owner’s Manual · Batteries · (AAA) Remote Control · Power Cord · M4 x 20 · Protection · Cover
Page 29 of the LG Electronics 32LD4 user manual — A-25
Page 29 · click to enlarge
Page 29

FRONT PANEL CONTROLS

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The energy consumed during use can be significantly reduced if the level of brightness of the picture

PREPARATION

is reduced, and this will reduce the overall running cost.

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-

ments of glass, or the TV may fall.

►Do not drag the TV. The floor or the product may be damaged.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — CAUTION diagram (page 29)
Fig. 91
LG Electronics 32LD4 — CAUTION diagram (page 29)
Fig. 92

PROGRAMME

VOLUME

OK

MENU

INPUT

SPEAKER

POWER

LG Electronics 32LD4 — PROGRAMME diagram (page 29)
Fig. 93

Intelligent Sensor Adjusts picture according to the surrounding conditions.

  • Illuminates red in standby mode.
  • Illuminates blue when the TV is switched on.

A-25

Remote Control Sensor · Power/Standby Indicator

Page 30 of the LG Electronics 32LD4 user manual — A-26
Page 30 · click to enlarge
Page 30

PREPARATION

BACK PANEL INFORMATION

  • Image shown may differ from your TV.
LG Electronics 32LD4 — PREPARATION diagram (page 30)
Fig. 94
LG Electronics 32LD4 — PREPARATION diagram (page 30)
Fig. 95

PREPARATION

2 3 6 4 5 7

LG Electronics 32LD4 — PREPARATION diagram (page 30)
Fig. 96

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

WIRELESS Control Connect the Wireless Media Box to the WIRELESS CONTROL jack on the TV.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

Antenna Input Connect antenna or cable to this jack.

RGB IN Input Connect the output from a PC.

USB Input Connect USB storage device to this jack.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Headphone Socket Plug the headphone into the headphone socket.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

Audio/Video Input Connect audio/video output from an external device to these jacks.

Component Input Connect a component video/audio device to these jacks.

A-26

Page 31 of the LG Electronics 32LD4 user manual — A-27
Page 31 · click to enlarge
Page 31

STAND INSTALLATION

BACK COVER FOR WIRE ARRANGEMENT

  • Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
  • Image shown may differ from your TV.

Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 1

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 31)
Fig. 97

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

LG Electronics 32LD4 — PREPARATION diagram (page 31)
Fig. 98

Open the Cable Management Clip as shown. 2

LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 31)
Fig. 99 · Open the Cable Management Clip as shown. 2
LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 31)
Fig. 100 · Open the Cable Management Clip as shown. 2

Assemble the parts of the Stand Body with the Cover Base of the TV. 2

LG Electronics 32LD4 — Open the Cable Management Clip as shown. 2 diagram (page 31)
Fig. 101 · Open the Cable Management Clip as shown. 2

Fit the Cable Management Clip as shown. 3

Assemble the TV as shown.

LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 31)
Fig. 102 · Fit the Cable Management Clip as shown. 3
LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 31)
Fig. 103 · Fit the Cable Management Clip as shown. 3
LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 31)
Fig. 104 · Fit the Cable Management Clip as shown. 3
LG Electronics 32LD4 — Fit the Cable Management Clip as shown. 3 diagram (page 31)
Fig. 105 · Fit the Cable Management Clip as shown. 3

4 NOTE ►Do not use the Cable Management Clip to lift

Fix the 4 bolts securely using the holes in the back of the TV.

LG Electronics 32LD4 — 4 NOTE ►Do not use the Cable Management Clip to lift diagram (page 31)
Fig. 106 · 4 NOTE ►Do not use the Cable Management Clip to lift
LG Electronics 32LD4 — 4 NOTE ►Do not use the Cable Management Clip to lift diagram (page 31)
Fig. 107 · 4 NOTE ►Do not use the Cable Management Clip to lift

the TV. - If the TV is dropped, you may be injured or the

TV may be damaged.

A-27

Stand Body · Cable Management Clip · Cover Base

Page 32 of the LG Electronics 32LD4 user manual — A-28
Page 32 · click to enlarge
Page 32

PREPARATION

ATTACHING THE TV TO A DESK (Only 32/42LD5***)

NOT USING THE DESK-TYPE STAND

  • Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Insert the Protection Cover into the TV until clicking sound.
  • Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 32)
Fig. 108
LG Electronics 32LD4 — PREPARATION diagram (page 32)
Fig. 109
LG Electronics 32LD4 — PREPARATION diagram (page 32)
Fig. 110

1-Screw ( provided as parts of the product)

SWIVEL STAND

  • Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

WARNING

►To prevent TV from falling over, the TV

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

A-28

Stand · Protection Cover · Desk

Page 33 of the LG Electronics 32LD4 user manual — A-29
Page 33 · click to enlarge
Page 33

CAREFUL INSTALLATION ADVICE

KENSINGTON SECURITY SYSTEM

  • This feature is not available for all models.
  • You should purchase necessary components
  • Image shown may differ from your TV.

to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kens- ington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note- book PCs and LCD projectors.

possibility of it falling when pushed. ■ The instructions shown below are a safer way

PREPARATION

to set up the TV, by fixing it to the wall, avoid- ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the pic- ture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

►The Kensington Security System is an

optional accessory. ►If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ►Some minute dot defects may be visible on

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. ►Avoid touching the LCD screen or holding

your finger(s) against it for long periods of time. Doing so may produce some tempo- rary distortion effects on the screen.

Use a sturdy rope to tie the product for align- ment. It is safer to tie the rope so it becomes horizontal between the wall and the product. 3

LG Electronics 32LD4 — NOTE diagram (page 33)
Fig. 111

NOTE

►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large

enough to support the size and weight of the TV. ►To use the TV safely make sure that the

height of the bracket on the wall and on the TV is the same.

A-29

Page 34 of the LG Electronics 32LD4 user manual — A-30
Page 34 · click to enlarge
Page 34

PREPARATION

  • The TV can be installed in various ways such as

NOTE

on a wall, or on a desktop etc. ■The TV is designed to be mounted horizontally.

►Should Install wall mount on a solid wall per-

pendicular to the floor. ►Should use a special wall mount, if you want

EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to tele- phone wires, lightening rods or gas pipes.

to install it to ceiling or slanted wall. ►The surface that wall mount is to be mount-

ed on should be of sufficient strength to sup- port the weight of TV set; e.g. concrete, nat- ural rock, brick and hollow block. ►Installing screw type and length depends on

PREPARATION

the wall mount used. Further information, refer to the instructions included with the mount. ►LG is not liable for any accidents or damage

to property or TV due to incorrect installa- tion: - Where a non-compliant VESA wall mount

is used. - Incorrect fastening of screws to surface

which may cause TV to fall and cause per- sonal injury. - Not following the recommended Installation

DESKTOP PEDESTAL INSTALLATION

method.

  • Image shown may differ from your TV.

For adequate ventilation allow a clearance of 10 cm all around the TV.

10 cm 10 cm

LG Electronics 32LD4 — DESKTOP PEDESTAL INSTALLATION diagram (page 34)
Fig. 112

WALL MOUNT: HORIZONTAL INSTALLATION

  • We recommend the use of a LG Brand wall

Model VESA (A * B)

mounting bracket when mounting the TV to a wall. ■We recommend that you purchase a wall

32LD5*** 42LD5*** 46LD5*** 52LD5*** 60LD5***

200 * 100 200 * 200 200 * 200 400 * 400 400 * 400

M4 M6

4

mounting bracket which supports VESA stan- dard. ■LG recommends that wall mounting be per-

formed by a qualified professional installer.

A-30

Show 11 more labels / short text on this page
Power Supply · Circuit breaker · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · 10 cm · Standard · Screw Quantity
Page 35 of the LG Electronics 32LD4 user manual — A-31
Page 35 · click to enlarge
Page 35

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

( POWER)

Switches the TV on from standby or off to standby.

LG Electronics 32LD4 — ( POWER) diagram (page 35)
Fig. 113

ENERGY

Adjust the Energy Saving mode of the TV.(► p.95)

SAVING

PREPARATION

AV MODE

It helps you select and set images and sounds when connecting AV devices.(► p.50)

External input mode rotate in regular sequence.(► p.43)

INPUT

Selects Radio, TV and DTV channel.

TV/RAD

0 to 9 number button

Selects a programme. Selects numbered items in a menu.

LIST

Displays the programme table. (► p.41)

Q.VIEW

Returns to the previously viewed programme.

MENU

Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(► p.19)

GUIDE

Shows programme guide(► p.86)

Q. MENU

Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(► p.18)

BACK

Allows the user to move return one step in an inter- active application, EPG or other user interaction function.

EXIT

Clears all on-screen displays and returns to TV viewing from any menu. Shows the present screen information.

THUMBSTICK

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

OK

Accepts your selection or displays the current mode. Coloured

These buttons are used for teletext (on TELETEXT models only), Programme edit.

TELETEXT

These buttons are used for teletext. For further details, see the ‘Teletext’ section.(► p.130)

BUTTONS

SUBTITLE

Recalls your preferred subtitle in digital mode.

A-31

INFO i · (Up/Down/Left/Right) · buttons

Page 36 of the LG Electronics 32LD4 user manual — A-32
Page 36 · click to enlarge
Page 36

PREPARATION

VOLUME UP

Adjusts the volume.

/DOWN

FAV

Displays the selected favourite programme.

PREPARATION

MARK

Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.

RATIO

Selects your desired Aspect Ratio of picture. (► p.92)

MUTE

Switches the sound on or off.

Selects a programme.

UP/DOWN

PAGE UP/

Move from one full set of screen information to the next one.

DOWN

SIMPLINK / MY MEDIA Menu control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List and Music List).

See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(► p.46)

AD

Switches the Audio Description On or Off.

Installing Batteries

LG Electronics 32LD4 — Installing Batteries diagram (page 36)
Fig. 114 · Installing Batteries
  • Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -). ■Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones. ■Close cover.

  • To remove the batteries, perform the installation actions in

reverse.

A-32

Programme

Page 37 of the LG Electronics 32LD4 user manual — A-33
Page 37 · click to enlarge
Page 37

LED LCD TV MODELS : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

  • Image shown may differ from your TV.

This item is not included for all models.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

PREPARATION

Polishing Cloth Polishing cloth for use on the screen.

Do not use excessive force. This may cause scratching or discolou- ration.

4-Ring spacers (Only 26LE3***,

26LE5***)

26LE5***)

Bolts for stand assembly

Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***

1-screw for stand fixing (Only 32LE3***, 32LE4***, 32LE5***)

(Only 32LE3***, 32LE4***, 32LE5***)

Bolts for stand assembly

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the elec- tromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.

Ferrite Core (This item is not included

for all models.)

Install the power plug closely.

A-33

Show 18 more labels / short text on this page
or · Owner’s Manual Batteries · (AAA) Remote Control · Only 19/22/26LE3***, 22/26LE5*** · (M4x20) (Only 26LE3***, · (M4x14) · Cable Holder · DC Adapter · Power Cord · Cable Holder · (M4x22) · (M4x24) · (M4x26) · (M4x16) · (Only 37/42LE4***, 37/42LE5***) · (Only 47/55LE5***) · Component gender cable, · AV gender cable
Page 38 of the LG Electronics 32LD4 user manual — OK PROGRAMME INPUT
Page 38 · click to enlarge
Page 38

PREPARATION

FRONT PANEL CONTROLS

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

PREPARATION

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-

ments of glass, or the TV may fall. ►Do not drag the TV. The floor or the product may be damaged.

  • Image shown may differ from your TV.

Only 32/37/42LE4*** Power/Standby Indicator Note: You can turn the Power Indicator on or off in the OPTION menu. P

LG Electronics 32LD4 — PREPARATION diagram (page 38)
Fig. 115

PROGRAMME

LG Electronics 32LD4 — PROGRAMME diagram (page 38)
Fig. 116

VOLUME

OK

OK

MENU

Touch Sensor

MENU

  • You can use the desired button function by touching.

INPUT

INPUT

SPEAKER

/ I

POWER

VOLUME MENU POWER Only 19/22/26LE3***, 22/26LE5***

LG Electronics 32LD4 — INPUT diagram (page 38)
Fig. 117
LG Electronics 32LD4 — INPUT diagram (page 38)
Fig. 118
LG Electronics 32LD4 — INPUT diagram (page 38)
Fig. 119
  • 1 Power/Standby Indicator
  • Illuminates red in standby mode.
  • The LED is off while the TV remains on.

OK PROGRAMME INPUT

2 Remote Control Sensor

Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***

VOLUME MENU POWER

LG Electronics 32LD4 — VOLUME MENU POWER diagram (page 38)
Fig. 120
LG Electronics 32LD4 — VOLUME MENU POWER diagram (page 38)
Fig. 121

Intelligent Sensor Adjusts picture according to the surrounding conditions.

Power/Standby Indicator Note: You can turn the Power Indicator on or off in the OPTION menu.

A-34

OK PROGRAMME INPUT

Show 5 more labels / short text on this page
Only 32/37/42LE4*** · Only 19/22/26LE33** · Only 19/22LE34** · Only 32LE3***, 32/37/42/47/55LE5*** · Remote Control Sensor
Page 39 of the LG Electronics 32LD4 user manual — A-35
Page 39 · click to enlarge
Page 39

BACK PANEL INFORMATION

Only 19/22LE3***, 22LE5***

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 19/22LE3***, 22LE5*** diagram (page 39)
Fig. 122 · Only 19/22LE3***, 22LE5***
LG Electronics 32LD4 — Only 19/22LE3***, 22LE5*** diagram (page 39)
Fig. 123 · Only 19/22LE3***, 22LE5***

PREPARATION

1 2 3 5 6 4

LG Electronics 32LD4 — PREPARATION diagram (page 39)
Fig. 124

8 9 10 7

DC ADAPTER PORT Connect to the power cord socket.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

RGB IN Input Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Audio/Video Input Connect audio/video output from an external device to these jacks.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

Component Input Connect a component video/audio device to these jacks.

Headphone Socket Plug the headphone into the headphone socket.

A-35

Page 40 of the LG Electronics 32LD4 user manual — A-36
Page 40 · click to enlarge
Page 40

PREPARATION

Only 26LE3***, 26LE5***

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 26LE3***, 26LE5*** diagram (page 40)
Fig. 125 · Only 26LE3***, 26LE5***

PREPARATION

1 2 3 5 6 4

8 9 10 7

DC ADAPTER PORT Connect to the power cord socket.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

RGB IN Input Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

RGB/DVI Audio Input Connect the audio from a PC or DTV.

Audio/Video Input Connect audio/video output from an external device to these jacks.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

Component Input Connect a component video/audio device to these jacks.

Headphone Socket Plug the headphone into the headphone socket.

A-36

Page 41 of the LG Electronics 32LD4 user manual — A-37
Page 41 · click to enlarge
Page 41

Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***

  • Image shown may differ from your TV.
LG Electronics 32LD4 — Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5*** diagram (page 41)
Fig. 126 · Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***

CAUTION

LG Electronics 32LD4 — CAUTION diagram (page 41)
Fig. 127
LG Electronics 32LD4 — CAUTION diagram (page 41)
Fig. 128

PREPARATION

► Use a product with the following

thickness for optimal connection to HDMI cable (Only HDMI IN 4) / USB device. *A 10 mm

2 3 4 5

LG Electronics 32LD4 — PREPARATION diagram (page 41)
Fig. 129

7 8 11 9 10

Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

WIRELESS CONTROL Connect the Wireless Media Box to the WIRELESS CONTROL jack on the TV.

HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

Audio/Video Input Connect audio/video output from an external device to these jacks.

OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

Antenna Input Connect antenna or cable to this jack.

USB Input Connect USB storage device to this jack.

RGB/DVI Audio Input Connect the audio from a PC or DTV.

PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)

Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks.

Component Input Connect a component video/audio device to these jacks.

Headphone Socket Plug the headphone into the headphone socket.

RGB IN Input Connect the output from a PC.

A-37

Page 42 of the LG Electronics 32LD4 user manual — 26LE5***)
Page 42 · click to enlarge
Page 42

PREPARATION

STAND INSTALLATION

  • Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Only 19/22LE3***, 22LE5***

Only 26/32LE3***, 32/42/47LE4***, 26LE5***, 32/37/42/47/55LE5***

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 42)
Fig. 130
LG Electronics 32LD4 — PREPARATION diagram (page 42)
Fig. 131

Assemble the parts of the Stand Body with the Stand Base of the TV. 2

Assemble the parts of the Stand Body with the Stand Base of the TV. 2

LG Electronics 32LD4 — PREPARATION diagram (page 42)
Fig. 132

M4 X 22(Only 32LE3***, 32LE4***, 32LE5***) M4 X 24(Only 37/42LE4***, 37/42LE5***) M4 X 26 (Only 47/55LE5***)

LG Electronics 32LD4 — PREPARATION diagram (page 42)
Fig. 133

M4 X 20 (Only 26LE3***, 26LE5***)

Assemble the TV as shown.

Assemble the TV as shown. 3

LG Electronics 32LD4 — Assemble the TV as shown. 3 diagram (page 42)
Fig. 134 · Assemble the TV as shown. 3
LG Electronics 32LD4 — Assemble the TV as shown. 3 diagram (page 42)
Fig. 135 · Assemble the TV as shown. 3
LG Electronics 32LD4 — Assemble the TV as shown. 3 diagram (page 42)
Fig. 136 · Assemble the TV as shown. 3
LG Electronics 32LD4 — Assemble the TV as shown. 3 diagram (page 42)
Fig. 137 · Assemble the TV as shown. 3

Fix the 4 bolts securely using the holes in the back of the TV.

Assemble the parts of the Stand Rear Cover with the TV. 4

LG Electronics 32LD4 — Assemble the parts of the Stand Rear Cover with the TV. 4 diagram (page 42)
Fig. 138 · Assemble the parts of the Stand Rear Cover with the…
LG Electronics 32LD4 — Assemble the parts of the Stand Rear Cover with the TV. 4 diagram (page 42)
Fig. 139 · Assemble the parts of the Stand Rear Cover with the…

M4 X 14

Fix the 4 bolts securely using the holes in the back of the TV. 5

LG Electronics 32LD4 — M4 X 14 diagram (page 42)
Fig. 140

M4 X 16 (Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)

A-38

M4 X 14 (Only 26LE3***,

26LE5***)

Show 5 more labels / short text on this page
Stand Body · Stand Body · Stand Base · Stand Base · Stand Rear Cover
Page 43 of the LG Electronics 32LD4 user manual — A-39
Page 43 · click to enlarge
Page 43

BACK COVER FOR WIRE ARRANGEMENT

  • Image shown may differ from your TV.

Only 19/22/26LE3***, 22/26LE5***

Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***

After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.

Secure the power cord with the Cable Holder on the TV back cover. It will help prevent the power cable from being removed by accident.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 43)
Fig. 141
LG Electronics 32LD4 — PREPARATION diagram (page 43)
Fig. 142
LG Electronics 32LD4 — PREPARATION diagram (page 43)
Fig. 143

After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.

LG Electronics 32LD4 — PREPARATION diagram (page 43)
Fig. 144
LG Electronics 32LD4 — PREPARATION diagram (page 43)
Fig. 145

A-39

Cable Holder · Cable Holder · Cable Holder

Page 44 of the LG Electronics 32LD4 user manual — A-40
Page 44 · click to enlarge
Page 44

PREPARATION

ATTACHING THE TV TO A DESK (Only 32LE3***, 32LE4***, 32LE5***)

CONNECTION OF TV

(Only 19/22/26LE3***, 22/26LE5***)

  • Ima4e shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
  • Image shown may differ from your TV.
LG Electronics 32LD4 — (Only 19/22/26LE3***, 22/26LE5***) diagram (page 44)
Fig. 146 · (Only 19/22/26LE3***, 22/26LE5***)

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 44)
Fig. 147

1-Screw ( provided as parts of the product)

Connect the antenna cable to the antenna input port on the TV.

Connect the DC adapter plug to the power input jack on the TV.

Connect the power cord to the DC adapter first, then plug the power cord into the wall power outlet.

CAUTION

WARNING

►Please be sure to connect the TV to the DC

►To prevent TV from falling over, the TV

power adapter before connecting the TV's power plug to a wall power outlet.

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

SWIVEL STAND (Only 26/32LE3***, 32/37/42LE4***, 26LE5***, 32/37/42/47/55LE5***)

DESKTOP PEDESTAL INSTALLATION

  • Image shown may differ from your TV.
  • Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

For adequate ventilation allow a clearance of 10 cm all around the TV.

LG Electronics 32LD4 — SWIVEL STAND (Only 26/32LE3***, 32/37/42LE4***, 26LE5***, 32/37/42/47/55LE5***) diagram (page 44)
Fig. 148 · SWIVEL STAND (Only 26/32LE3***, 32/37/42LE4***, 26LE…

10 cm 10 cm

A-40

Show 5 more labels / short text on this page
DC Adapter · Stand · Desk · 10 cm · 10 cm
Page 45 of the LG Electronics 32LD4 user manual — A-41
Page 45 · click to enlarge
Page 45

CAREFUL INSTALLATION ADVICE

KENSINGTON SECURITY SYSTEM

  • You should purchase necessary components
  • This feature is not available for all models.

to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the

  • Image shown may differ from your TV.

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kens- ington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note- book PCs and LCD projectors.

possibility of it falling when pushed. ■ The instructions shown below are a safer way

PREPARATION

to set up the TV, by fixing it to the wall, avoid- ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the pic- ture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

►The Kensington Security System is an

optional accessory. ►If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ►Some minute dot defects may be visible on

Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. ►Avoid touching the LCD screen or holding

your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

LG Electronics 32LD4 — NOTE diagram (page 45)
Fig. 149

Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

NOTE

►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large

enough to support the size and weight of the TV. ►To use the TV safely make sure that the

height of the bracket on the wall and on the TV is the same.

A-41

Page 46 of the LG Electronics 32LD4 user manual — A-42
Page 46 · click to enlarge
Page 46

PREPARATION

  • The TV can be installed in various ways such as

on a wall, or on a desktop etc. ■The TV is designed to be mounted horizontally.

EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to tele- phone wires, lightening rods or gas pipes.

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 46)
Fig. 150

Model VESA (A * B)

WALL MOUNT: HORIZONTAL INSTALLATION

19/22/26LE3*** 32LE3*** 32LE4*** 37/42LE4*** 22/26LE5*** 32LE5*** 37/42/47LE5*** 55LE5***

100 * 100 200 * 100 200 * 100 200 * 200 100 * 100 200 * 100 200 * 200 400 * 400

M4 M4 M4 M6 M4 M4 M6 M6

4

  • We recommend the use of a LG Brand wall

mounting bracket when mounting the TV to a wall. ■We recommend that you purchase a wall mount-

ing bracket which supports VESA standard. ■LG recommends that wall mounting be per-

formed by a qualified professional installer.

NOTE

< Only 26LE3***, 26LE5*** >

►Should Install wall mount on a solid wall per-

  • Image shown may differ from your TV.

pendicular to the floor. ►Should use a special wall mount, if you want

LG Electronics 32LD4 — NOTE diagram (page 46)
Fig. 151

to install it to ceiling or slanted wall. ►The surface that wall mount is to be mount-

ed on should be of sufficient strength to sup- port the weight of TV set; e.g. concrete, nat- ural rock, brick and hollow block. ►Installing screw type and length depends on

the wall mount used. Further information, refer to the instructions included with the mount. ►LG is not liable for any accidents or damage

Place the ring spacers on the set before installing the wall mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly.

to property or TV due to incorrect installa- tion: - Where a non-compliant VESA wall mount

is used. - Incorrect fastening of screws to surface

which may cause TV to fall and cause per- sonal injury. - Not following the recommended Installation

method.

A-42

Show 10 more labels / short text on this page
10 cm · 10 cm · 10 cm · 10 cm · 10 cm · Power Supply · Circuit breaker · Standard · Screw Quantity · 4-Ring spacers
Page 47 of the LG Electronics 32LD4 user manual — A-43
Page 47 · click to enlarge
Page 47

REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — LED LCD TV Models : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5** diagram (page 47)
Fig. 152 · LED LCD TV Models : 19/22/26/32LE3***, 32/37/42LE4**…

Switches the TV on from standby or off to standby.

( POWER)

ENERGY

Adjust the Energy Saving mode of the TV.(► p.95)

SAVING

PREPARATION

AV MODE

It helps you select and set images and sounds when connecting AV devices.(► p.50)

INPUT

External input mode rotate in regular sequence.(► p.43)

TV/RAD

Selects Radio, TV and DTV channel.

0 to 9 number button

Selects a programme. Selects numbered items in a menu.

LIST

Displays the programme table. (► p.41)

Q.VIEW

Returns to the previously viewed programme.

MENU

Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(► p.19)

GUIDE

Shows programme guide.(► p.86)

Q. MENU

Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(► p.18)

BACK

Allows the user to move return one step in an inter- active application, EPG or other user interaction function. Clears all on-screen displays and returns to TV viewing from any menu.

EXIT

Shows the present screen information.

THUMBSTICK

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

OK

Accepts your selection or displays the current mode.

These buttons are used for teletext (on TELETEXT models only), Programme edit.

TELETEXT

These buttons are used for teletext. For further details, see the ‘Teletext’ section.(► p.130)

LG Electronics 32LD4 — TELETEXT diagram (page 47)
Fig. 153

BUTTONS

SUBTITLE

Recalls your preferred subtitle in digital mode.

A-43

Show 4 more labels / short text on this page
INFO i · (Up/Down/Left/Right) · Coloured · buttons
Page 48 of the LG Electronics 32LD4 user manual — A-44
Page 48 · click to enlarge
Page 48

PREPARATION

LG Electronics 32LD4 — PREPARATION diagram (page 48)
Fig. 154

VOLUME UP

Adjusts the volume.

/DOWN

FAV

Displays the selected favourite programme.

MARK

Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.

PREPARATION

RATIO

Selects your desired Aspect Ratio of picture. (► p.92)

MUTE

Switches the sound on or off.

Selects a programme.

UP/DOWN

PAGE UP/

Move from one full set of screen information to the next one.

DOWN

SIMPLINK / MY MEDIA Menu control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List and Music List or Movie List).

See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(► p.46)

AD

Switches the Audio Description On or Off.

Installing Batteries

LG Electronics 32LD4 — Installing Batteries diagram (page 48)
Fig. 155 · Installing Batteries
  • Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -). ■Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones. ■Close cover.

  • To remove the batteries, perform the installation actions in

reverse.

A-44

Programme

Page 49 of the LG Electronics 32LD4 user manual — UHF
Page 49 · click to enlarge
Page 49

EXTERNAL EQUIPMENT SETUP

  • To prevent damage do not connect to the mains outlet until all connections are made between the

devices.

ANTENNA CONNECTION

  • For optimum picture quality, adjust antenna direction.
  • An antenna cable and converter are not supplied.
LG Electronics 32LD4 — ANTENNA CONNECTION diagram (page 49)
Fig. 156

EXTERNAL EQUIPMENT SETUP

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

Wall Antenna Socket

RF Coaxial Wire (75 Ω)

Outdoor Antenna (VHF, UHF)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

LG Electronics 32LD4 — Outdoor Antenna (VHF, UHF) diagram (page 49)
Fig. 157 · Outdoor Antenna (VHF, UHF)

UHF

Antenna

VHF

  • In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier

to the antenna as shown above. ■If signal needs to be split for two TVs,use an antenna signal splitter for connection.

Signal Amplifier

Page 50 of the LG Electronics 32LD4 user manual — EXTERNAL EQUIPMENT SETUP
Page 50 · click to enlarge
Page 50

EXTERNAL EQUIPMENT SETUP

  • To avoid damaging any equipment, never plug in any power cord until you have finished connecting

all equipment. ■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4***

models. ■Image shown may differ from your TV.

CONNECTING WITH A COMPONENT CABLE

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

LG Electronics 32LD4 — CONNECTING WITH A COMPONENT CABLE diagram (page 50)
Fig. 158

1 Connect the video outputs (Y, PB, PR) of the external equipment (digital set-top box, DVD, etc.) to the COMPONENT IN VIDEO jacks on the TV.

EXTERNAL EQUIPMENT SETUP

2 Connect the audio output of the external equip- ment (digital set-top box, DVD, etc.) to the COMPONENT IN AUDIO jacks on the TV.

3 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.)

4 Select the Component input source using the INPUT button on the remote control.

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 50)
Fig. 159

►HDMI Audio Supported format : Dolby Digital, PCM DTS Audio format is not supported.

480i/576i O X 480p/576p O O 720p/1080i O O

1080p O (50 Hz / 60 Hz only)

O (24 Hz / 30 Hz /

50 Hz / 60 Hz)

Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV Y PB PR

Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr

Show 4 more labels / short text on this page
or · Signal Component HDMI · Video output ports · on DVD player
Page 51 of the LG Electronics 32LD4 user manual — NOTE
Page 51 · click to enlarge
Page 51

CONNECTING WITH AN HDMI CABLE

LG Electronics 32LD4 — CONNECTING WITH AN HDMI CABLE diagram (page 51)
Fig. 160

1 Connect the HDMI output of the external equipment (digital set- top box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI IN 4 (Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) jack on the TV.

EXTERNAL EQUIPMENT SETUP

2 Turn on the external equipment. (Refer to the external equipment's manual for operating instruc- tions.)

3 Select HDMI1, HDMI2 (Except for 19/22LD3***), HDMI3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI4 (Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) input source using the INPUT button on the remote control.

NOTE

►The TV can receive video and audio signals simultaneously when

using an HDMI cable.

►If the DVD does not support Auto HDMI, you must set the output reso-

lution appropriately.

►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI

cables are not High Speed HDMI Cable, flickering or no screen dis- play can result. Please use the High Speed HDMI Cable.

Page 52 of the LG Electronics 32LD4 user manual — EXTERNAL EQUIPMENT SETUP
Page 52 · click to enlarge
Page 52

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH AN HDMI TO DVI CABLE

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 52)
Fig. 161

1 Connect the digital set-top box or the DVI out- put of the PC to HDMI/DVI IN 1 jack on the TV.

2 Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

EXTERNAL EQUIPMENT SETUP

3 Turn on the digital set-top box or the PC and the TV. (Refer to the digital set-top box or the PC manual for operating instructions.)

4 Select HDMI1 input source using the INPUT button on the remote control.

or

Page 53 of the LG Electronics 32LD4 user manual — NOTE
Page 53 · click to enlarge
Page 53

CONNECTING WITH A EURO SCART CABLE

LG Electronics 32LD4 — CONNECTING WITH A EURO SCART CABLE diagram (page 53)
Fig. 162

1 Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV.

2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.)

EXTERNAL EQUIPMENT SETUP

3 Select AV1 input source using the INPUT but- ton on the remote control.

Video Audio RGB Video, Audio

AV1 O O O Analogue TV, Digital TV

AV1 (When DTV scheduled recording is in progress using recording equipment.)

► TV OutOutputs Analogue TV

Current input model

or Digital TV signals.

Digital TV Digital TV O

Analogue TV, AV Analogue TV O (The input mode is converted

to DTV.) Component/RGB Analogue TV

NOTE

► Any Euro scart cable used must be signal shielded.

Show 5 more labels / short text on this page
Input Output · Scart · Output Type · AV1 (TV Out) · HDMI Analogue TV
Page 54 of the LG Electronics 32LD4 user manual — EXTERNAL EQUIPMENT SETUP
Page 54 · click to enlarge
Page 54

EXTERNAL EQUIPMENT SETUP

USB SETUP

1 Connect the USB device to the USB IN jack on the TV.

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 54)
Fig. 163

2 After connecting the USB IN jack, you use the USB function. (► p.52)

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH A RF CABLE

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 54)
Fig. 164

1 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

2 Connect the antenna cable to the ANT IN socket of the VCR.

3 Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

1 or · Wall Jack · Antenna

Page 55 of the LG Electronics 32LD4 user manual — NOTE
Page 55 · click to enlarge
Page 55

CONNECTING WITH A RCA CABLE

LG Electronics 32LD4 — CONNECTING WITH A RCA CABLE diagram (page 55)
Fig. 165

1 Connect the AUDIO/VIDEO jacks between TV and VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)

2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Or, Operate the corresponding external equip- ment. (Refer to external equipment operating guide.)

EXTERNAL EQUIPMENT SETUP

3 Select AV2 input source using the INPUT but- ton on the remote control. If connected to AV IN 3, select AV3 input source.

NOTE

►If you have a mono VCR, connect the audio cable

from the VCR to the AUDIO L/MONO jack of the TV.

LG Electronics 32LD4 — NOTE diagram (page 55)
Fig. 166
Show 7 more labels / short text on this page
or · Video Game Set · Camcorder · or · or · Video Game Set · Camcorder
Page 56 of the LG Electronics 32LD4 user manual — EXTERNAL EQUIPMENT SETUP
Page 56 · click to enlarge
Page 56

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH A D-SUB 15 PIN CABLE

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set- tings.

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 56)
Fig. 167

1 Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.

2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

EXTERNAL EQUIPMENT SETUP

3 Turn on the PC and the TV

4 Select RGB input source using the INPUT but- ton on the remote control.

Page 57 of the LG Electronics 32LD4 user manual — HEADPHONE SETUP
Page 57 · click to enlarge
Page 57

INSERTION OF CI MODULE

To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries.

LG Electronics 32LD4 — INSERTION OF CI MODULE diagram (page 57)
Fig. 168
LG Electronics 32LD4 — INSERTION OF CI MODULE diagram (page 57)
Fig. 169

1 Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown.

For further information, see p.34.

EXTERNAL EQUIPMENT SETUP

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 57)
Fig. 170

►Check if the CI module is inserted into the PCMCIA card slot

Check this point as shown and insert the CI Module.

in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.

HEADPHONE SETUP

You can listen the sound through the headphone.

1 Plug the headphone into the headphone socket.

LG Electronics 32LD4 — HEADPHONE SETUP diagram (page 57)
Fig. 171

2 To adjust the headphone volume, press the + or - button. If you press the MUTE button, the sound from the headphone is switched off.

LG Electronics 32LD4 — HEADPHONE SETUP diagram (page 57)
Fig. 172

►AUDIO menu items are disabled when connecting a headphone.

►When changing AV MODE with a headphone connected, the change is applied to video but not to audio.

►Optical Digital Audio Out is not available when connecting a headphone.

►Max audio output of headphone10 mW to 15 mW
Page 58 of the LG Electronics 32LD4 user manual — CAUTION
Page 58 · click to enlarge
Page 58

EXTERNAL EQUIPMENT SETUP

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 58)
Fig. 173

1 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

EXTERNAL EQUIPMENT SETUP

2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.

3 Set the “TV Speaker option - Off ” in the AUDIO menu.(►p.112). Refer to the external audio equipment instruction manual for opera- tion.

CAUTION

► Do not look into the optical output port. Looking at the laser

beam may damage your vision.

Page 59 of the LG Electronics 32LD4 user manual — LG Wireless Media Box
Page 59 · click to enlarge
Page 59

EXTERNAL EQUIPMENT WIRELESS CONNECTION

(Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)

You can connect between TV and external equipment wirelessly. For further information, refer to the “LG Wireless Media Box” manual for operating instructions.

EXTERNAL EQUIPMENT SETUP

1 Connect the Wireless Media Box to the WIRELESS CONTROL jack and HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI IN 4 (Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) jack on the TV.

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 59)
Fig. 174

LG Wireless Media Box

Page 60 of the LG Electronics 32LD4 user manual — NOTE
Page 60 · click to enlarge
Page 60

EXTERNAL EQUIPMENT SETUP

SUPPORTED DISPLAY RESOLUTION

RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode

720x400 31.468 70.08

720x480 31.469

640x480 31.469 59.94

800x600 37.879 60.31

720x576 31.25 50

1024x768 48.363 60.00

1280x720 37.5

EXTERNAL EQUIPMENT SETUP

1280x768 47.78 59.87

44.96/45

59.94/60

1360x768 47.72 59.80

33.72/33.75

59.94/60

1280x1024 63.981 60.02

26.97/27

23.97/24

(RGB-PC) 66.587 59.93

33.716/33.75

29.976/30.00

(HDMI-PC) 66.587 59.93

67.43/67.5

59.94/60

(Except for 19/22/26LD3***, 26/32LD32**, 32LD34**, 19/22/26/32LE3***, 26/32LD33**)

NOTE

►Connect the audio cable from the PC to the Audio

►Avoid keeping a fixed image on the set’s screen

input on the TV. (Audio cables are not included with the TV).

for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

►If using a sound card, adjust PC sound as required.

►If the graphic card on the PC does not output ana-

►There may be interference relating to resolution,

logue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.

vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

►If the graphic card on the PC does output analogue

and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)

►DOS mode may not work depending on the video

►The synchronization input waveform for Horizontal

card if you use an HDMI to DVI cable.

and Vertical frequencies are separate.

►If you use too long an RGB-PC cable, there may be

►We recommend using 1920x1080, 60 Hz(Except

interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

for 19/22/26LD3***, 26/32LD32**, 32LD34**, 19/22/26/32LE3***, 26/32LD33**), 1360x768, 60 Hz(Only 19/22/26LD3***, 26/32LD32**, 32LD34**, 19/22/26/32LE3***, 26/32LD33**) for the PC mode, this should provide the best picture quality.

►Connect the signal cable from the monitor output

port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

Show 7 more labels / short text on this page
Resolution Horizontal Frequency(kHz) · Vertical Frequency(Hz) · Resolution Horizontal Frequency(kHz) · Vertical Frequency(Hz) · 1920x1080 · 1920x1080 · 1920x1080
Page 61 of the LG Electronics 32LD4 user manual — W C
Page 61 · click to enlarge
Page 61

SCREEN SETUP FOR PC MODE

Screen Reset

Returns Position, Size and Phase to the factory default settings.

This function works in the following mode : RGB[PC].

EXTERNAL EQUIPMENT SETUP

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 61)
Fig. 175
LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 61)
Fig. 176

SCREEN Move Prev.

  • Sh Sh Sh
  • Sh
  • Sh
  • Sh Sh Sh Sh arpn arpn arpn arpn arpn arpn arpn p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70
  • Colour 60

Auto Config.

  • Tint 0

R G

  • Colour Temp. 0

W C

  • Advanced Control
  • Picture Reset
  • TruMotion
  • Screen
  • Screen

Select PICTURE.

Select Screen.

Select Reset.

Select Yes.

Run Reset.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 9 more labels / short text on this page
OK Move PICTURE · Resolution · Position · To Set · Size · Yes No · Phase · ► · Reset
Page 62 of the LG Electronics 32LD4 user manual — W C
Page 62 · click to enlarge
Page 62

EXTERNAL EQUIPMENT SETUP

Auto Configure (RGB [PC] mode only)

Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.

Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.

EXTERNAL EQUIPMENT SETUP

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 62)
Fig. 177

SCREEN Move Prev.

  • Sh Sh Sh
  • Sh
  • Sh
  • Sh Sh Sh Sh arpn arpn arpn arpn arpn arpn arpn p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70
  • Colour 60

Auto Config.

  • Tint 0

R G

  • Colour Temp. 0

W C

Auto Config.

  • Advanced Control
  • Picture Reset
  • TruMotion
  • Screen
  • Screen
  • If the position of the image is still not correct, try Auto adjustment again.

Select PICTURE.

  • If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position , Size or Phase .

Select Screen.

Select Auto Config..

Select Yes.

Run Auto Config..

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 8 more labels / short text on this page
OK Move PICTURE · Resolution · Position · Size · Yes No · Phase · ► · Reset
Page 63 of the LG Electronics 32LD4 user manual — W C
Page 63 · click to enlarge
Page 63

Selecting Resolution

To view a normal picture, match the resolution of RGB mode and selection of PC mode.

This function works in the following mode: RGB[PC]

EXTERNAL EQUIPMENT SETUP

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 63)
Fig. 178

SCREEN Move Prev.

  • Sh Sh Sh
  • Sh
  • Sh
  • Sh
  • Sh Sh Sh arpn arpn arpn arpn arpn arpn arpn p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70
  • Colour 60

Auto Config.

  • Tint 0

R G

  • Colour Temp. 0

W C

  • Advanced Control
  • Picture Reset
  • TruMotion
  • Screen
  • Screen

Select PICTURE.

Select Screen.

Select Resolution.

Select the desired resolution.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 10 more labels / short text on this page
OK Move PICTURE · Resolution · 1024 x 768 · 1280 x 768 · 1360 x 768 · Position · Size · ► · Phase · Reset
Page 64 of the LG Electronics 32LD4 user manual — W C
Page 64 · click to enlarge
Page 64

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually.

This function works in the following mode : RGB[PC].

EXTERNAL EQUIPMENT SETUP

LG Electronics 32LD4 — EXTERNAL EQUIPMENT SETUP diagram (page 64)
Fig. 179

SCREEN

Move Prev.

  • Sh Sh Sh
  • Sh
  • Sh
  • Sh
  • Sh Sh Sh arpn arpn arpn arpn arpn arpn arpn p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70
  • Colour 60

Auto Config.

  • Tint 0

R G

  • Colour Temp. 0

W C

  • Advanced Control
  • Picture Reset
  • TruMotion
  • Screen
  • Screen

Select PICTURE.

Select Screen.

Select Position, Size or Phase.

Make appropriate adjustments.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
OK Move PICTURE · Resolution · Position · Size · Phase · ► · Reset
Page 65 of the LG Electronics 32LD4 user manual — VOLUME ADJUSTMENT
Page 65 · click to enlarge
Page 65

WATCHING TV / PROGRAMME CONTROL

TURNING ON THE TV

When your TV is turned on, you will be able to use its features.

1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.

2 In standby mode to turn TV on, press the / I, INPUT or P (or P ▲▼ ) button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.

INITIALIZING SETUP

WATCHING TV / PROGRAMME CONTROL

1 If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Mode Setting, Power Indicator(When you select Home Use from Mode Setting - Only LED LCD TV MODELS), Country or TimeZone (When Russia is select- ed for Country) or Set Password(When France is selected for Country), Auto Tuning.

again. b. Press the BACK button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might

not work, depending on the DTV broadcasting environment. d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode. e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality

data, “Store Demo” mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the

OPTION menu. g. When France is selected for Country, password is not '0', '0', '0', '0' but ‘1’, ‘2’, ‘3’, ‘4’.

PROGRAMME SELECTION

1 Press the P or NUMBER buttons to select a programme number.

VOLUME ADJUSTMENT

1 Press the + or - button to adjust the volume.

2 If you wish to switch the sound off, press the MUTE button.

You can cancel this function by pressing the MUTE, + , - or AV Mode button.

Page 66 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 66 · click to enlarge
Page 66

WATCHING TV / PROGRAMME CONTROL

QUICK MENU

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Aspect Ratio: Selects your desired picture for- mat. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After complet- ing Zoom Setting, the display goes back to Q.Menu. Clear Voice II: By differentiating the human sound range from others, it helps users lis- ten to human voices better. Picture Mode: Selects your desired Picture Mode. Sound Mode: It is a feature to automatical- ly set the sound combination which it deems the best for the images being watched. Selects your desired Sound Mode.

Audio or Audio Language: Selects the sound output. Sleep Timer: Sets the sleep timer. Skip Off/On: Selects the Skip Off/On. USB Device: Selects “Eject” in order to eject USB device.

WATCHING TV / PROGRAMME CONTROL

◄ Aspect Ratio ►

16:9

Display each menu.

Select your desired Source.

  • Press the Q.MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

Exit

Page 67 of the LG Electronics 32LD4 user manual — NOTE
Page 67 · click to enlarge
Page 67

ON SCREEN MENUS SELECTION AND ADJUSTMENT

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

LG Electronics 32LD4 — ON SCREEN MENUS SELECTION AND ADJUSTMENT diagram (page 67)
Fig. 180
LG Electronics 32LD4 — ON SCREEN MENUS SELECTION AND ADJUSTMENT diagram (page 67)
Fig. 181

SETUP

PICTURE

AUDIO

  • Auto Tuning
  • Aspect Ratio : 16:9
  • Auto Volume : Off
  • Manual Tuning
  • Clear Voice II : Off 3
  • Picture Wizard
  • Programme Edit
  • Energy Saving : Off
  • Balance 0

L R

  • CI Information
  • Picture Mode : Standard
  • Sound Mode : Standard
  • Backlight 70
  • Infinite Sound : Off
  • Treble 50
  • Contrast 100
  • Brightness 50
  • Bass 50
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 70 70 70
  • R e
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set set
LG Electronics 32LD4 — L R diagram (page 67)
Fig. 182

WATCHING TV / PROGRAMME CONTROL

Exit Option Press OK( ) to see photos from the USB.

  • IR B IR B IR B IR B IR B IR B l t l t last last last last er er er er

(Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22/26LE3***, 22/26LE5***)

Display each menu.

  • Press the RED button, you can check the Customer Support menu.
  • Press the GREEN button, you can check the Simple Manual menu.
  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

Select a menu item.

Move to the pop up menu.

NOTE

►It is not possible to use CI Information in Analogue mode.

► IR BlasterFor further information, refer to the optional “Wireless Media Box” manual for operat-

ing instructions. ►It is possible to use Movie List menu in 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***,

32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336.

OK Move · OK Move · OK Move

Page 68 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 68 · click to enlarge
Page 68

WATCHING TV / PROGRAMME CONTROL

AUTO PROGRAMME TUNING

Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1,000. But the number may differ slightly depending on broadcasting signals.

DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable.

If you want to select the Antenna ,

LG Electronics 32LD4 — If you want to select the Antenna , diagram (page 68)
Fig. 183 · If you want to select the Antenna ,

WATCHING TV / PROGRAMME CONTROL

SETUP

SETUP

  • Auto Tuning Please select your TV Connection.
  • Auto Tuning
  • Auto Tuning
  • Auto Tuning
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Programme Edit
  • CI Information
  • CI Information

Check your antenna connection. The previous channel information will be updated during Auto Tuning.

If you select antenna or cable, existing channel information is deleted.

SECAM L Search Automatic Numbering

  • Use NUMBER buttons to input a 4-digit password in Lock System ‘ On ’.
  • If you wish to keep on auto tuning select Start using the button. Then, press the OK button. Otherwise select Close .
  • Automatic Numbering : Decide whether to use the programme numbers as sent by broadcasting stations for tuning.
  • When select Italy in the County menu, If the pop up is displayed when the conflicted programme after Auto Tuning, select a broadcaster for Conflicting programme number to solve.

Select SETUP.

Select Auto Tuning.

Select Antenna.

Select Start.

Run Auto tuning.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • In the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland, Denmark, Austria, Finland, Norway, Slovenia, Hungary, Ukraine. (The supported country can be added.)
  • In the following country, Digital TV can not be used : Slovakia, Bosnia, Serbia, Bulgaria, Albania, Kazakhstan.
Show 11 more labels / short text on this page
OK Move · OK Move · Antenna · ► · Antenna Cable · Antenna · Antenna Cable · Start · Cable Antenna · Close · Close
Page 69 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 69 · click to enlarge
Page 69

If you want to select the Cable ,

SETUP

SETUP

SETUP

  • Auto Tuning
  • Auto Tuning
  • Auto Tuning
  • Auto Tuning Please select your TV Connection.
  • Auto Tuning
  • Auto Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Programme Edit
  • Programme Edit
  • CI Information
  • CI Information
  • CI Information
  • Cable DTV Setting
  • Cable DTV Setting
  • Cable DTV Setting

If you select antenna or cable, existing channel information is deleted.

WATCHING TV / PROGRAMME CONTROL

  • Use NUMBER buttons to input a 4-digit password in Lock System ‘ On ’.
  • When you select the Cable , the Cable Service Operator selection screen can differ or not exist by the Cable situation of the applicable country.
  • The popup window to select Service Operator is only shown initially for the 3 cases when you accessing the Initial Setting menu, when you change from Antenna to Cable or when you access the menu after changing the Country .
  • When you want to select Service Operator aside from the above 3 cases, you can do so by selecting Setup->Cable DTV Setting-> Service Operator .

Select SETUP.

Select Auto Tuning.

Select Cable.

Select Comhem or Other Operators.

Select Quick or Full.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • Acquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital, Stofa), Norway(Canal Digital), Netherlands(Ziggo), Ukraine(Volia-Cable)
  • If there are not any Service Operator that you want, select Other Operators .
  • If you select “Other Operators”, or the selected country supports “Other Operators” only, it may take some time to search all the channels, or it may not search some of the channels. If some of the channels do not appear, follow the steps below: 1. SETUP -> Auto Tuning -> Cable -> Setting 2. Switch Home Tuning from " Off " to " On " 3. Input additional values such as the frequency, symbol rate, modulation, and network ID. (You can ask your cable service provider for the above information.)
Show 14 more labels / short text on this page
OK Move · OK Move · OK Move · Service Operator · ► · ► · ► · Comhem · Antenna Cable · Other Operators · Antenna Cable · Previous Next · Cable Antenna · Close
Page 70 of the LG Electronics 32LD4 user manual — OK
Page 70 · click to enlarge
Page 70

WATCHING TV / PROGRAMME CONTROL

  • When you select the Quick,

Home Tuning ◄ On ►

Start Frequency(kHz)114000
  • Frequency(kHz)
Start Frequency(kHz)114000
End Frequency(kHz)862000
End Frequency(kHz)862000
  • Symbol rate(kS/s)
  • Modulation
NetworkAuto

Check your antenna connection. The previous channel information will be updated during Auto Tuning.

NetworkAuto

640QAM

Skip Scramble Programme Automatic Numbering

OK

OK

WATCHING TV / PROGRAMME CONTROL

  • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close .
  • Automatic Numbering : Decide whether to use the programme numbers as sent by broadcasting stations for tuning.
  • Skip Scramble Programme : Scramble Programme is skipped in Auto Tuning and Manual Tuning .

Select Quick.

Select Setting.

Make appropriate adjustments.

Select Close.

Select OK.

Select Start.

Run Auto tuning.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 16 more labels / short text on this page
Quick · Quick · Cable · Cable · Network ID · Auto · Setting · Setting · Start Frequency(kHz) · Start · Close · End Frequency(kHz) · Close · Close · Reset · Close
Page 71 of the LG Electronics 32LD4 user manual — OK
Page 71 · click to enlarge
Page 71
  • When you select the Full,

Search every available signal.

Check your antenna connection. The previous channel information will be updated during Auto Tuning.

Skip Scramble Programme Automatic Numbering

OK

WATCHING TV / PROGRAMME CONTROL

  • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close .
  • Automatic Numbering : Decide whether to use the programme numbers as sent by broadcasting stations for tuning.
  • Skip Scramble Programme : Scramble Programme is skipped in Auto Tuning and Manual Tuning .
  • You can not select the Full when the service operator is set to " Ziggo " or " Other Operators " of Netherlands.

Select Full.

Select OK.

Select Start.

Run Auto tuning.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
Full · Cable · Cable · Start · Close · Close
Page 72 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 72 · click to enlarge
Page 72

WATCHING TV / PROGRAMME CONTROL

  • The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels. In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full. However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be taken too much.
  • Frequency : Enter a user-defined frequency.
  • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel).
  • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
  • Network ID : Unique identifier allocated for each user.
  • Start Frequency : Enter a user-defined start frequency range.
  • End Frequency : Enter a user-defined end frequency range.

WATCHING TV / PROGRAMME CONTROL

Page 73 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 73 · click to enlarge
Page 73

CABLE DTV SETTING

(IN CABLE MODE ONLY)

The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.

After changing Service Operator, a warning window saying that channel map will be deleted when OK button is pressed or Close is selected, and a Auto-tuning pop-up window appears when ‘YES’ is selected.

WATCHING TV / PROGRAMME CONTROL

SETUP

SETUP

  • Auto Tuning
  • Auto Tuning
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Programme Edit
  • CI Information
  • CI Information
  • Cable DTV Setting
  • Cable DTV Setting
  • Cable DTV Setting
  • Cable DTV Setting
  • If you select Cable , you can see Cable DTV Setting menu.

Select SETUP.

  • When Channel Auto Update is On , you can update information for all the programmes that can be updated, including the programme currently being watched.

Select Cable DTV Setting.

Select Service Operator or Channel Auto Update.

  • When Channel Auto Update is Off , you can only update information for the programme currently being watched.
  • You can not select the Cable DTV Setting when the service operator is set to " Ziggo ".

Select your desired Source.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 8 more labels / short text on this page
OK Move · OK Move · Service Operator · ◄ Comhem ► · ► · Channel Auto Update · Off · Close
Page 74 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 74 · click to enlarge
Page 74

WATCHING TV / PROGRAMME CONTROL

MANUAL PROGRAMME TUNING

(IN DIGITAL MODE)

Manual Tuning lets you manually add a programme to your programme list.

If you want to select the Antenna ,

SETUP

SETUP

◄ DTV ►

  • Auto Tuning
  • Auto Tuning

WATCHING TV / PROGRAMME CONTROL

UHF CH. 30

  • Manual Tuning
  • Manual Tuning Frequency(kHz) 474000
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Programme Edit
  • CI Information
  • CI Information
  • Signal Strength 50%
  • Signal Quality 50%

Select SETUP.

  • Use NUMBER buttons to input a 4-digit password in Lock System ‘ On ’.
  • You can select SBAND when the country is set to "Norway, Latvia."

Select Manual Tuning.

Select DTV.

Select the desired channel number.

Select update or add if signal present.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
OK Move · OK Move · ► · ► · Add · Close
Page 75 of the LG Electronics 32LD4 user manual — Make appropriate adjustments. 4
Page 75 · click to enlarge
Page 75

If you want to select the Cable ,

SETUP

SETUP

◄ Cable DTV ►

  • Auto Tuning
  • Auto Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Programme Edit
  • CI Information
  • CI Information

WATCHING TV / PROGRAMME CONTROL

  • Cable DTV Setting
  • Cable DTV Setting
  • Signal Strength 50%
  • Signal Quality 50%
  • Use NUMBER buttons to input a 4-digit password in Lock System ‘ On ’.
  • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel).
  • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
  • You can not select the Cable DTV when the service operator is set to " Ziggo " or " Other Operators " of Netherlands.

Select SETUP.

Select Manual Tuning.

Select Cable DTV.

Make appropriate adjustments. 4

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 9 more labels / short text on this page
OK Move · OK Move · Frequency(kHz) 362000 · ► · ► · Symbol rate(kS/s) 6875 · Modulation 64QAM · Add · Close
Page 76 of the LG Electronics 32LD4 user manual — Select the desired programme number on. 5
Page 76 · click to enlarge
Page 76

WATCHING TV / PROGRAMME CONTROL

MANUAL PROGRAMME TUNING

(IN ANALOGUE MODE)

Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.

SETUP

SETUP

  • Auto Tuning
  • Auto Tuning

◄ TV ►

  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning

◄ Cable TV ►

  • Programme Edit
  • Programme Edit
  • Storage
  • Storage
  • CI Information
  • CI Information
  • System BG

WATCHING TV / PROGRAMME CONTROL

  • System BG
  • Band V/UHF
  • Band V/UHF
  • Channel
  • Channel
  • Fine
  • Fine
  • Search
  • Search
  • Name C 02
  • Name C 02

Select SETUP.

Select V/UHF or Cable.

or 7

Select the desired channel number. 8

Select Manual Tuning.

Commence searching.

Select TV or Cable TV.

Select the desired programme number on. 5

Select Store.

Select a TV system.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • Use NUMBER buttons to input a 4-digit password in Lock System ‘ On ’.
  • L : SECAM L/L’ (France)

BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa) I: PAL I (U.K. / Ireland / Hong Kong / South Africa) DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)

  • To store another channel, repeat steps 4 to 9.
Show 14 more labels / short text on this page
OK Move · OK Move · ► · ► · or · ◄ ► · ◄ ► · ◄ ► · ◄ ► · Store · Store · Close · Close · or
Page 77 of the LG Electronics 32LD4 user manual — Select TV or Cable TV . 3
Page 77 · click to enlarge
Page 77

SETUP

SETUP

  • Auto Tuning
  • Auto Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning

◄ TV ►

◄ Cable TV ►

  • Programme Edit
  • Programme Edit
  • Storage
  • Storage
  • CI Information
  • CI Information
  • System BG
  • System BG
  • Band V/UHF
  • Band V/UHF
  • Channel
  • Channel
  • Fine
  • Fine
  • Search
  • Search
  • Name C 02
  • Name C 02

WATCHING TV / PROGRAMME CONTROL

  • Assigning a station name

You can assign a station name with five characters to each programme number.

Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. 6

Select SETUP.

Select Manual Tuning.

Select TV or Cable TV.

Select Close.

Select Name.

Select Store.

  • Fine Tuning

Normally fine tuning is only necessary if reception is poor.

Select Fine. Select SETUP.

Select Manual Tuning.

Fine tune for the best picture and sound.

Select TV or Cable TV . 3

Select Store . 6

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 13 more labels / short text on this page
OK Move · OK Move · ► · ► · or · ◄ ► · ◄ ► · ◄ ► · ◄ ► · Store · Store · Close · Close
Page 78 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 78 · click to enlarge
Page 78

WATCHING TV / PROGRAMME CONTROL

PROGRAMME EDIT

When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing.

If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.

This function enables you to skip the stored programmes.

You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning.

LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 78)
Fig. 184

WATCHING TV / PROGRAMME CONTROL

  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Manual Tuning
  • Programme Edit
  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Page 79 of the LG Electronics 32LD4 user manual — IN TV MODE
Page 79 · click to enlarge
Page 79

IN DTV/RADIO MODE

  • Skipping a programme number
  • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing.
  • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.

Select a programme number to be skipped.

2 BLUE Turn the programme number to blue.

3 BLUE Release.

WATCHING TV / PROGRAMME CONTROL

  • Locking a programme number
  • It can be registered as Lock programme even when Lock System is turned Off.

Select a programme number to be locked.

2 YELLOW Turn the programme number to yellow.

3 YELLOW Release.

IN TV MODE

This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers.

  • Deleting a programme

Select a programme number to be deleted.

2 RED Turn the programme number to red.

  • The selected programme is deleted, all the following programmes are shifted up one
  • Moving a programme

3 GREEN Release.

Select a programme number to be moved.

2 GREEN Turn the programme number to green.

Page 80 of the LG Electronics 32LD4 user manual — Add corresponding programme to Favourite list of current Favourite group. 3
Page 80 · click to enlarge
Page 80

WATCHING TV / PROGRAMME CONTROL

  • Skipping a programme number
  • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing.
  • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.

Select a programme number to be skipped.

2 BLUE Turn the programme number to blue.

3 BLUE Release.

WATCHING TV / PROGRAMME CONTROL

  • Auto Sort
  • After activating Auto Sort once, you can no longer edit programmes. 1

Start Auto Sort.

  • Locking a programme number
  • It can be registered as Lock programme even when Lock System is turned Off.

Select a programme number to be locked.

2 YELLOW Turn the programme number to yellow.

3 YELLOW Release.

  • Selecting favourite programme

Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes.

Select your desired programme.

Add corresponding programme to Favourite list of current Favourite group. 3

Release.

Page 81 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 81 · click to enlarge
Page 81
  • Selecting favourite programme group

Select your desired programme.

Display a pop-up window where Favourite group can be changed. 3

Select a Favourite group.

WATCHING TV / PROGRAMME CONTROL

Page 82 of the LG Electronics 32LD4 user manual — SETUP
Page 82 · click to enlarge
Page 82

WATCHING TV / PROGRAMME CONTROL

CI [COMMON INTERFACE] INFORMATION

This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.

This may be incompatible with the CI module and smart card.

CI (Common Interface) functions may not be possible depending upon the country broadcasting cir- cumstances.

WATCHING TV / PROGRAMME CONTROL

When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of either DVB-CI or CI plus.

SETUP

  • Auto Tuning
  • Manual Tuning
  • Programme Edit
  • CI Information
  • CI Information
  • This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider.
  • It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.

Select SETUP.

Select CI Information.

Select the desired item: Module information, smart card information, language, or software download etc.

Save.

  • Press the BACK/EXIT button to move to the previous menu screen.
Show 7 more labels / short text on this page
Viaccess Module · OK Move · Consultations · Authorizations · Module information · ► · Select the item
Page 83 of the LG Electronics 32LD4 user manual — RED
Page 83 · click to enlarge
Page 83

SOFTWARE UPDATE

Software Update means software can be downloaded through the digital terrestrial broadcasting system.

  • Current Version

SETUP PICTURE

AUDIO

TIME

00.00.01

Product/Service Info.

WATCHING TV / PROGRAMME CONTROL

LOCK OPTION

INPUT

MY MEDIA

Press OK( ) to set programme settings.

Exit Customer Support Simple Manual

Select Customer Support.

RED

Select Software Update.

Select On or Off. • If you select On, a user confirm message box will be displayed to notify that new software is found. 4

Save.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 9 more labels / short text on this page
Software Update · ◄ On ► · Software Update · Software Update · Picture Test · Sound Test · Signal Test · Close · Close
Page 84 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 84 · click to enlarge
Page 84

WATCHING TV / PROGRAMME CONTROL

  • When setting “Software Update”

Occasionally, a transmission of updated digital software infor- mation will result in the following menu on the TV screen.

Download starts when "Yes" is selected. At this time, pro- gressing pop-up window does not display. Download progress status can be checked from Software Update menu.

A window as display below appears when download completes. TV is restarted when "Yes" is selected.

Software update is available. Would you like to download now? ?

New software version is ready. If you want to install now, TV will be turned off and restart. Continue?

Software downloading progress. Ver. 00.00.01 ► Ver.00.00.00

Simple Updatefor current update stream

WATCHING TV / PROGRAMME CONTROL

A new software update is available at 00/00/0 00:00. Do you want to update the software when available?

Schedule Updatefor scheduled update stream

When the Software Update menu is "Off", the message to change it to "On" appears.

  • - During Progress of a Software Update, please note the following:
  • Power to the TV must not be interrupted.
  • The antenna must not be disconnected.
  • After Software Update, you can confirm the updated software version in Software Update menu.
  • It may take hours to download the software, so make sure that the power stays on during the download.
  • The software is downloaded only in Standby mode or in MUX with Software Update Service, and stops when the power cord is unplugged or when viewing MUX without Software Update Service.
  • When you return to Standby mode or MUX with Software Update Service, the software download will resume from where it stopped.
Show 10 more labels / short text on this page
Yes · No · Software Update · ◄ On ► · Yes No · 4% · Close · ? · Yes · No
Page 85 of the LG Electronics 32LD4 user manual — RED
Page 85 · click to enlarge
Page 85

PICTURE/SOUND TEST

This function is a customer support function that can execute picture and sound tests.

Do you have a problem in this test screen? ?

SETUP

PICTURE

AUDIO

TIME

Product/Service Info.

WATCHING TV / PROGRAMME CONTROL

LOCK OPTION

INPUT

MY MEDIA

Press OK( ) to set programme settings.

Exit Customer Support Simple Manual

Select Customer Support.

RED

Select Picture Test or Sound Test.

Select Yes or No.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
Software Update · Picture Test · Picture Test · Sound Test · Signal Test · Yes No · Close
Page 86 of the LG Electronics 32LD4 user manual — RED
Page 86 · click to enlarge
Page 86

WATCHING TV / PROGRAMME CONTROL

DIAGNOSTICS

This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version.

This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple chan- nels.))

WATCHING TV / PROGRAMME CONTROL

Engineering Diagnostics ManufacturerLG Electronics Inc. Model/Type : 42LD450-ZA Serial No. : SKJY1107 Software Version : V00.00.01

SETUP

PICTURE

AUDIO

TIME

Product/Service Info.

Ch 38 Ch 54

LOCK OPTION

INPUT

MY MEDIA

Press OK( ) to set programme settings.

Exit MENU Popup Prev.

Exit Customer Support Simple Manual

RED

Select Customer Support.

Select Signal Test.

Display Manufacturer, Model/Type, Serial Number and Software Version.

Display the information of Channel.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 10 more labels / short text on this page
Software Update · Picture Test · Sound Test · Ch 30 · Signal Test · Signal Test · Ch 34 · Ch 36 · Close · Ch 60
Page 87 of the LG Electronics 32LD4 user manual — RED
Page 87 · click to enlarge
Page 87

PRODUCT/SERVICE INFORMATION

This function is a customer support function that can see product/service information and customer service center information.

SETUP

PICTURE

AUDIO

TIME

Product/Service Info. Product/Service Info.

WATCHING TV / PROGRAMME CONTROL

LOCK OPTION

INPUT

MY MEDIA

Press OK( ) to set programme settings.

Exit Customer Support Simple Manual

Select Customer Support.

RED

Select Product/Service Info..

Display MODEL/TYPE, Software version, Serial Number, Customer service center and Homepage.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
Software Update · Picture Test · Sound Test · Signal Test · Close
Page 88 of the LG Electronics 32LD4 user manual — GREEN
Page 88 · click to enlarge
Page 88

WATCHING TV / PROGRAMME CONTROL

SIMPLE MANUAL

You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 88)
Fig. 185

SETUP

PICTURE

AUDIO

TIME

WATCHING TV / PROGRAMME CONTROL

LOCK OPTION

INPUT

MY MEDIA

Press OK( ) to set programme settings.

Exit Customer Support Simple Manual

  • RED : Go to the Index page.
  • BLUE : Play the Simple Manual automatically or manually.

GREEN

Select Simple Manual.

Select the part of the manual you want to see.

  • Press the EXIT button to return to normal TV viewing.
Page 89 of the LG Electronics 32LD4 user manual — 1 BBC
Page 89 · click to enlarge
Page 89

SELECTING THE PROGRAMME LIST

You can check which programmes are stored in the memory by displaying the programme list.

LG Electronics 32LD4 — SELECTING THE PROGRAMME LIST diagram (page 89)
Fig. 186

Displayed when the Locked Programme.

1 BBC

2 BBC

3 BBC

4 BBC

5 BBC A

WATCHING TV / PROGRAMME CONTROL

Pr.Edit

  • You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
  • Displaying programme LIST

Display the Programme List.

  • Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned.

BLUE Turn the programme edit.

  • Selecting a programme in the programme list

The mode will be switched between TV, DTV, and Radio from the program you are cur- rently watching.

Select a programme.

Switch to the chosen programme number.

Show 4 more labels / short text on this page
Mini Glossary · Programme List · Exit · ►
Page 90 of the LG Electronics 32LD4 user manual — YELLOW
Page 90 · click to enlarge
Page 90

WATCHING TV / PROGRAMME CONTROL

  • Paging through a programme list

Turn the pages. 2

Return to normal TV viewing.

WATCHING TV / PROGRAMME CONTROL

  • Displaying the favourite programme list
LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 90)
Fig. 187

◄ ►Favourite Pr. Group

Group B ◄ ►

1 BBC

2 BBC

3 BBC

Pr.Edit Pr.Reg.

BLUE Turn the programme edit.

Display the Favourite Programme List.

Current channel is registered/ cancelled as preferred channel on currently selected Group.

YELLOW

Favourite group is changed.

Show 4 more labels / short text on this page
Favourite List · Exit · ► · ►
Page 91 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 91 · click to enlarge
Page 91

INPUT LIST

HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro- gramme in DTV/RADIO/TV mode.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — INPUT LIST diagram (page 91)
Fig. 188

WATCHING TV / PROGRAMME CONTROL

LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 91)
Fig. 189
  • Antenna or Cable : Select it when watching the DTV/RADIO/TV.
  • USB : Select it when using USB depends on connector.
  • AV : Select it when watching the VCR or external equipment.
  • Component : Select it when using the DVD or the Digital set-top box depends on connector.
  • RGB :Select it when using PC depends on connector.
  • HDMI : Select it when using DVD, PC or Digital set-top box depend on connector.
Page 92 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 92 · click to enlarge
Page 92

WATCHING TV / PROGRAMME CONTROL

INPUT LABEL

Selects a label for each input source.

  • Image shown may differ from your TV.
LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 92)
Fig. 190
LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 92)
Fig. 191

WATCHING TV / PROGRAMME CONTROL

BLUE

Select Input Label.

Select the source.

Select the label.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Page 93 of the LG Electronics 32LD4 user manual — MHEG
Page 93 · click to enlarge
Page 93

DATA SERVICE

(This menu is enabled only in Ireland. )

This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you select- ed.

WATCHING TV / PROGRAMME CONTROL

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : Ireland
  • Country : Ireland
  • Disability Assistance
  • Disability Assistance
  • Power Indicator
  • Power Indicator
  • Data Service : MHEG MHEG
  • Data Service : MHEG
  • Data Service : MHEG
  • Data Service : MHEG

MHEG

  • Factory Reset
  • Factory Reset
  • Set ID : 1
  • Set ID : 1
  • M d M d M d Mode Mode Mode Mode Mode Mode Mode Mode Mode ode S t S t S t Set Set Set Set Set Set Set Set Set Se ti ti ti ting ting ting ting ting ting ting ting ting H : H : H : H : H : H : H : H : H : H ome ome ome ome ome ome ome ome ome o e U se Use Use Use Use Use Use Use Use Use
  • M d M d M d Mode Mode Mode Mode Mode Mode Mode Mode Mode ode S t S t S t Set Set Set Set Set Set Set Set Set Se ti ti ti ting ting ting ting ting ting ting ting ting H : H : H : H : H : H : H : H : H : H ome ome ome ome ome ome ome ome ome o e U se Use Use Use Use Use Use Use Use Use

Select OPTION.

Select Data Service.

Select MHEG or Teletext.

Save.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
OK Move · OK Move · ► · ► · ► · Teletext
Page 94 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 94 · click to enlarge
Page 94

WATCHING TV / PROGRAMME CONTROL

SIMPLINK

This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo.

This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable with- out additional cables and settings.

If you do not want SIMPLINK menu,select “Off”.

In wireless external output, SIMPLINK function is not supported.

WATCHING TV / PROGRAMME CONTROL

DISC

VCR

VCR

Display the SIMPLINK.

Select On or Off.

Save.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
OK Exit · ◄ On ► · Watch TV · HDD Recorder · Speaker · ◄ ► · TV Speaker
Page 95 of the LG Electronics 32LD4 user manual — Home Theater
Page 95 · click to enlarge
Page 95

Connecting to Home Theater with the SIMPLINK logo.

1 Connect the HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI IN 4 (Only 32LE3***, 32/42/47LE4***, 32/37/42/47/55LE5***) terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.

LG Electronics 32LD4 — SIMPLINK diagram (page 95)
Fig. 192

2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables.

WATCHING TV / PROGRAMME CONTROL

3 Select Home Theater in the Speaker menu by pushing the SIMPLINK button.

► When you select or operate a media device with

home theater function, the speaker automatically switches to home theater speaker (HT speaker).

Home Theater

NOTE

►Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK

device with the HDMI cable.

►When you switch the Input source using the INPUT button on the remote control, you can stop the opera-

tion of a device controlled by SIMPLINK.

Page 96 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 96 · click to enlarge
Page 96

WATCHING TV / PROGRAMME CONTROL

SIMPLINK Functions

Control connected AV devices by pressing the , OK, ►, ▀, l l, ◄◄ and ►► buttons.

After connecting AV devices to the TV, you can directly control the devices and play media without additional set- tings.

Enables you to select one of the AV devices connected to the TV and operate it.

Power off all devices

When you switch off the TV, all connected devices are turned off.

WATCHING TV / PROGRAMME CONTROL

Offers an easy way to switch audio-out.

When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. * A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function. Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used. (*CEC: Consumer Electronics Control).

Show 5 more labels / short text on this page
Disc playback · Direct Play · Select AV device · Switch audio-out · Sync Power on
Page 97 of the LG Electronics 32LD4 user manual — VCR
Page 97 · click to enlarge
Page 97

SIMPLINK Menu

Press the button and then OK button to select the desired SIMPLINK source.

TV viewing : Switch to the previous TV pro- gramme regardless of the current mode.

DISC playback : Select and play connected discs. When multiple discs are available, the device type of discs are conveniently displayed at the bottom of the screen.

When a device is con- nected (displayed in bright colour)

DISC

VCR

When device is not con- nected (displayed in gray)

VCR playback : Play and control the con- nected VCR.

VCR

WATCHING TV / PROGRAMME CONTROL

HDD Recordings playback : Play and con- trol recordings stored in HDD.

Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.

  • Home theater: Only one supported at a time
  • DVD, Recorder: Up to one(Only 19/22LD3***), two(Only 26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***), three(Only 32/42/46/52/60LD5***, 26LE3***, 26LE5***), four(Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) supported at a time.
  • VCR: Only one supported at a time
Show 8 more labels / short text on this page
OK Exit · ◄ On ► · Selected Device · Watch TV · HDD Recorder · ◄ ► · Speaker · TV Speaker
Page 98 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 98 · click to enlarge
Page 98

WATCHING TV / PROGRAMME CONTROL

AV MODE

You can select the optimal images and sounds when connecting AV devices to external input.

Off Disables the AV MODE. Cinema Optimizes video and audio for watching movies. Sport Optimizes video and audio for watching sports events. Game Optimizes video and audio for playing games.

WATCHING TV / PROGRAMME CONTROL

1 AV MODE Press the AV MODE button repeatedly to select the desired source.

  • If you select Cinema in AV mode, Cinema will be selected both for Picture Mode and Sound Mode in PICTURE menu and AUDIO menu respectively.
  • If you select “ Off ” in AV mode, the picture and image which you initially set will be selected.
  • When playing a video game using PlayStation or Xbox, it is recommended to use the Game mode.
  • When in Game mode, functions related to picture quality will be optimized for playing games.

Off Cinema · Game Sport

Page 99 of the LG Electronics 32LD4 user manual — WATCHING TV / PROGRAMME CONTROL
Page 99 · click to enlarge
Page 99

INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)

This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup.

When the Lock System menu is "On", the message to enter the password appears.

WATCHING TV / PROGRAMME CONTROL

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK
  • Disability Assistance
  • Disability Assistance
  • Power Indicator
  • Power Indicator
LG Electronics 32LD4 — WATCHING TV / PROGRAMME CONTROL diagram (page 99)
Fig. 193

All user settings and channel settings will be reset. Still Continue?

  • Factory Reset
  • Factory Reset
  • Factory Reset
  • Factory Reset
  • Set ID : 1
  • Set ID : 1
  • Mode Setting : Home Use
  • Mode Setting : Home Use
  • In Lock System " On ", if you forget your password, press '0', '3', '2', '5' on the remote control hands et.

Select OPTION.

Select Factory Reset.

Select Yes.

Start Factory Reset.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
OK Move · OK Move · ► · ► · Yes No
Page 100 of the LG Electronics 32LD4 user manual — MY MEDIA
Page 100 · click to enlarge
Page 100

TO USE A USB DEVICE

WHEN CONNECTING A USB DEVICE

When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat- ed. When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu. In USB device, you can not add a new folder or delete the existing folder.

Connect the USB device to the USB IN jack on the TV.

  • Only photo(JPEG), music (MP3) and movie (DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,T S,TRP,TP,ASF,WMV,FLV) are supported.
LG Electronics 32LD4 — TO USE A USB DEVICE diagram (page 100)
Fig. 194

TO USE A USB DEVICE

When removing the USB device

Select the USB Device menu before removing the USB device.

Select Movie List (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336), Photo List or Music List.

Select USB Device.

2 Select Eject.

MY MEDIA

Movie List Music List

Exit Option Press OK( ) to see photos from the USB.

or · Photo List

Page 101 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 101 · click to enlarge
Page 101

Precautions when using the USB device

►Only a USB storage device is recognizable.

►If the USB storage device is connected through a USB hub, the device is not recognizable.

►A USB storage device using an automatic recognition programme may not be recognized.

►A USB storage device which uses its own driver may not be recognized.

►The recognition speed of a USB storage device may depend on each device.

►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.

When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. ►Please do not connect the USB storage device which was artificially maneuvered on the PC. The

device may cause the product to malfunction or fail to be played. Never forget to use only a USB stor- age device which has normal music files, image files or movie files. ►Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system

provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. ►Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If

not, the device may not be recognized. ►Please connect a USB storage device with the cable offered by the device maker.

►Some USB storage devices may not be supported or operated smoothly.

TO USE A USB DEVICE

►File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100

English characters. ►Be sure to back up important files since data stored in a USB memory device may be damaged. We

will not be responsible for any data loss. ► If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to

connect the external power source. - Please use a power adaptor for an external power source. We do not guar- antee an USB cable for an external power source. ►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use

up to 4 partitions or USB memory devices. ►If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

►If the USB memory device does not work properly, disconnect and reconnect it.

►How fast a USB memory device is detected differs from device to device.

►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is

turned on. ►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB

memory. ►Any device with more than the recommended capacity may not work properly.

►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on

again to make it work properly. ►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the

movie list. ►Maximum of 999 folders or files can be recognized under one folder.

Page 102 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 102 · click to enlarge
Page 102

TO USE A USB DEVICE

MOVIE LIST (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336)

You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.

Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.dvix/*.avi/*.asf/*.wmv/*.flv/*.avi(motion-jpeg)/*.

mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file

Video formatDivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,

TO USE A USB DEVICE

Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263

Audio formatDolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA
Bit ratewithin 32 kbps to 320 kbps(MP3)
External Subtitle format*.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle formatonly, XSUB (It is the subtitle format used in DivX6 files)
  • Some user-created subtitles may not work properly.
  • Some special characters are not supported in subtitles.
  • HTML tags are not supported in subtitles.
  • Subtitles in languages other than the supported languages are not available.
  • The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
  • A damaged movie file may not be played correctly, or some player functions may not be usable.
  • Movie files produced with some encoders may not be played correctly.
  • If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
  • HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame.
  • Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly depending on the frame.
  • Movie files other than the specified types and formats may not work properly.
  • Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps)
  • We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
  • DTS Audio codec is not supported.
  • A movie file more than 30 GB in file size is not supported for playback.
  • A DivX movie file and its subtitle file must be located in the same folder.
  • A video file name and its subtitle file name must be identical for it to be displayed.
  • Playing a video via a USB connection that doesn’t support high speed may not work properly.
  • Files encoded with GMC(Global Motion Compensation) may not be played.
  • When you are watching the movie by Movie List function, you can adjust an image by Energy Saving and AV Mode key on the remote control. User setup for each image mode does not operate.
Page 103 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 103 · click to enlarge
Page 103

Video Decoder Audio Codec Max Resolution

mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM

ts,trp,tp MPEG2, H.264, AVS, VC1

AAC, HE-AAC

vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM

MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,

AAC, HE-AAC ,MP3

Xvid 1.03, Xvid 1.10-beta1/2H.264

mkv H.264, MPEG-1,2,4

HE-AAC ,LPCM

(only , Motion JPEG

MPEG2, MPEG4,DivX 3.11, DivX 4. DivX 5, DivX 6, Xvid 1.00, Xvid 1.01,

Xvid 1.02, Xvid 1.03, Xvid

ADPCM,AAC,HE-AAC

1.10-beta1/2H.264

Motion JPEG (avi, mp4, mkv) JPEG LPCM, ADPCM

TO USE A USB DEVICE

asf, wmv VC1 WMA

flv Sorenson H.263, H264 MP3, AAC

Show 9 more labels / short text on this page
File Extension name · dat MPEG1 MP2 · MP2,MP3,Dolby Digital, · mp4, mov · MP2,MP3,Dolby Digital,AAC · 1920x1080@30p · 640x480@30p) · MP2,MP3,Dolby Digital,LPCM, · divx, avi
Page 104 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 104 · click to enlarge
Page 104

TO USE A USB DEVICE

Screen Components

You can also adjust USB in the INPUT menu.

Select MY MEDIA . Select Movie List. 2 1

Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on 1

Page 1/1 Movie List

003 001 002 004

Current page/ total pages of contents under the folder focused on 1

TO USE A USB DEVICE

Mark MARK Play Page Change Move P

To Photo List Change Numbers Mark Mode Exit

  • Some files may be displayed the preview image by icon only.
  • Non-supported files are displayed the preview image by icon only.
  • Abnormal files are displayed in the form of bitmap.
LG Electronics 32LD4 — TO USE A USB DEVICE diagram (page 104)
Fig. 195
LG Electronics 32LD4 — TO USE A USB DEVICE diagram (page 104)
Fig. 196
LG Electronics 32LD4 — TO USE A USB DEVICE diagram (page 104)
Fig. 197

Drive1 Page 1/1 · 005 006

Page 105 of the LG Electronics 32LD4 user manual — EXIT
Page 105 · click to enlarge
Page 105

Movie Selection

  • When playing movie files

Page 1/1 Movie List

003 001 002 004

005 006 051. Apple 02:30:25

Mark MARK Play Page Change Move P

To Photo List Change Numbers Mark Mode Exit

  • Use the P button to navigation in the movie page.

Select the target folder or drive.

TO USE A USB DEVICE

Select the desired movie title.

Movie files are played.

Using the remote control

GREEN Repeatedly, press the GREEN button to converted to Photo List->Music List.

YELLOW A method to view in 5 large thumbnail or simple list.

BLUE Convert to Mark Mode.

Return to normal TV viewing.

EXIT

► Press the PLAY(►) button to return to normal playback.

Drive1 Page 1/1

Page 106 of the LG Electronics 32LD4 user manual — RED
Page 106 · click to enlarge
Page 106

TO USE A USB DEVICE

  • When selected movie files are played

Page 1/1 Movie List

003 001 002 004

51. Apple 02:30:25

Mark MARK Mark Page Change Move P

Exit Mark Mode Unmark All Mark All Play Marked Exit

Select the target folder or drive.

  • When one or more movie files are marked, the marked movies will be played in sequence.

Select the desired movie title.

TO USE A USB DEVICE

or BLUE Convert to Mark Mode.

Mark desired Movie file.

5 Marked movie file is played.

RED

NOTE

►In the case of files not supported, a message regarding non-supported file is displayed.

Mark Mode · Drive1 Page 1/1 · 005 006

Page 107 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 107 · click to enlarge
Page 107

Using the remote control

RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically.

GREEN Mark all movie files on the screen.

YELLOW Deselect all marked movie files.

BLUE Exit the Mark Mode.

EXIT Return to normal TV viewing.

TO USE A USB DEVICE

NOTE

►If you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart

where it stopped previously.

►If continuous series files exist within the folder, the next file will automatically be played.

But, this excludes cases when the Repeat function of Movie List Option is turned “On” (Refer to p. 62) or when set as Marked Play.

Page 108 of the LG Electronics 32LD4 user manual — NOTE
Page 108 · click to enlarge
Page 108

TO USE A USB DEVICE

Using the Movie List function, play

LG Electronics 32LD4 — Using the Movie List function, play diagram (page 108)
Fig. 198 · Using the Movie List function, play

Choose options.

Set Video Play.

Set Video.

Set Audio.

► 01:02:30 / 02:30:25 ◄►

  • ► II ◄◄ ►►

Option Hide Q.MENU

TO USE A USB DEVICE

Show the Option menu.

Select Set Video Play., Set Video. or Set Audio..

NOTE

►Option values changed in Movie List does not affect Photo List and Music List.

►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List

excluding Movie List.

►When replaying the video file after stopping, you can play from where it stopped previously.

Close · Exit · or

Page 109 of the LG Electronics 32LD4 user manual — SAVING
Page 109 · click to enlarge
Page 109

Using the remote control

  • Stop the playing movie file. ► Press the PLAY( ► ) button to return to normal playback.

During playback, press the Pause(II) button.

  • Still screen is displayed.
  • If no buttons are pressed on the remote control for 10 minutes after pausing, the

TV returns to the playback state. ■Press the Pause(II) button and then use the FF(►►) button for slow motion.

When playing, repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) -> ◄◄◄(x4) -> ◄◄◄◄(x8) ->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) . repeatedly, press the FF(►►) button to speed up ►►(x2)-> ►►►(x4) -> ►►►►(x8) ->►►►►►(x16) -> ►►►►►►(x32).

  • Pressing these buttons repeatedly increases the fast forward/reverse speed.

Show the Option menu.

TO USE A USB DEVICE

Hide the menu on the full-sized screen.

  • To see the menu again on the full-sized screen, press OK button to display.

Return to normal TV viewing.

< > ■When using the < or > button during playback a cursor indicating the position can

be viewed on the screen.

ENERGY

Press the ENERGY SAVING button repeatedly to change the brightness of your screen.(Refer to p. 95)

SAVING

AV MODE

Press the AV MODE button repeatedly to select the desired source.(Refer to p. 50)

◄◄ / ►► · or

Page 110 of the LG Electronics 32LD4 user manual — NOTE
Page 110 · click to enlarge
Page 110

TO USE A USB DEVICE

  • When you select the Set Video Play,

Set Video Play.

Full Picture Size ◄ ►

Audio Language 1 ◄ ►

On ◄ ► Subtitle Language

English ● Language ◄ ►

Default ● Code page ◄ ►

0 ● Sync ◄ ►

0 ● Position ◄ ►

Normal ● Size ◄ ►

On Repeat ◄ ►

Select Picture Size, Audio Language, Subtitle Langugae or Repeat.

► Picture SizeSelects your desired picture

TO USE A USB DEVICE

Make appropriate adjustments.

format during movie play. ►Audio Language : Changes the Language

Group of the audio during movie play. Files with a single audio track cannot be selected. ►Subtitle Langugae : Turn on/off the subtitle.

Subtitle Language Support Language

English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian

► LanguageActivated for SMI subtitle and

can select the language within the subtitle. ►Code page : Can select the font for subti-

Latin2 Bosnian, Polish, Croatian, Czech,

tle. When set to default, same font as gen- eral menu will be used. ►Sync : Adjusts the time synchronisation of

Slovak, Slovenian, Serbian, Hungarian

Latin4 Estonian, Latvian, Lithuanian

Cyrillic Bulgarian, Macedonian, Russian, Ukrainian, Kazakh

the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play. ►Position: Changes the position of the

subtitle either up or down during movie play. ►Size: Selects your desired Subtitle size

during movie play. ► RepeatTurn on/off repeat function of

movie playback. When turned on, the file within the folder will be played back repeatedly. Even when the repeated play- back is turned off, it can run the playback if the file name is similar to the previous file.

NOTE

►Only 10,000 of sync blocks can be supported within the subtitle file.

►When playing a video, you can adjust the Picture Size by pressing the RATIO button.

Show 4 more labels / short text on this page
Previous · Latin1 · Greek Greek · Turkish Turkish
Page 111 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 111 · click to enlarge
Page 111
  • When you select the Set Video,

Set Video.

  • Backlight 70
  • Contrast 100
  • Brightness 50
  • Colour 60
  • Dynamic Contrast
  • Edge Enhancer High ◄ ►
  • Noise Reduction Medium ◄ ►

TruMotion Low ◄ ►

TO USE A USB DEVICE

Select Picture Mode or TruMotion.

Make appropriate adjustments. (Refer to p. 96 to 103)

Show 10 more labels / short text on this page
Picture Mode · Standard ◄ ► · ◄ ► · ◄ · ◄ ► · ◄ ► · Medium ◄ ► · (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***) · Picture Reset · Previous
Page 112 of the LG Electronics 32LD4 user manual — L R ◄ ►
Page 112 · click to enlarge
Page 112

TO USE A USB DEVICE

  • When you select the Set Audio,

Set Audio.

Standard Sound Mode ◄ ►

Off Auto Volume ◄ ►

Off Clear Voice II

L R ◄ ►

TO USE A USB DEVICE

Select Sound Mode, Auto Volume, Clear Voice II or Balance.

Make appropriate adjustments. (Refer to p. 107 to 111)

◄ ► · Balance 0 · Previous

Page 113 of the LG Electronics 32LD4 user manual — Select MY MEDIA . Select Photo List. 2 1
Page 113 · click to enlarge
Page 113

PHOTO LIST

You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode.

LG Electronics 32LD4 — PHOTO LIST diagram (page 113)
Fig. 199

Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440

  • You can play JPEG files only.
  • Non-supported files are displayed in the form of predefined icon.

Screen Components

You can also adjust USB in the INPUT menu.

TO USE A USB DEVICE

LG Electronics 32LD4 — TO USE A USB DEVICE diagram (page 113)
Fig. 200

Select MY MEDIA . Select Photo List. 2 1

Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on 1

Current page/ total pages of contents under the folder focused on 1

Page 114 of the LG Electronics 32LD4 user manual — Using the remote control
Page 114 · click to enlarge
Page 114

TO USE A USB DEVICE

Photo Selection

  • When playing photo files
LG Electronics 32LD4 — Photo Selection diagram (page 114)
Fig. 201 · Photo Selection

TO USE A USB DEVICE

  • Use the P button to navigation in the photo page.

Using the remote control

LG Electronics 32LD4 — Using the remote control diagram (page 114)
Fig. 202 · Using the remote control

GREEN Repeatedly, press the GREEN button to converted to Music List->Movie List.

YELLOW A method to view in 5 large thumbnail or simple list.

Page 115 of the LG Electronics 32LD4 user manual — RED
Page 115 · click to enlarge
Page 115
  • When selected photo files are displayed

Page 1/1 Photo List

002 003 004 005 006 007 008 009

010 011 012 013 014 015

Mark MARK Mark Page Change Move P

Exit Mark Mode Unmark All Mark All View Marked Exit

TO USE A USB DEVICE

Select the target folder or drive.

  • When one or more photos are marked, you can view each marked photo or a slide show of the marked photos. If no photos are marked, you can view every individual photo in the folder or a slide show of all photos in the folder.

Select the desired photos.

or BLUE Convert to Mark Mode.

Mark desired photo file.

5 Marked photo file is displayed.

RED

Mark Mode · Drive1 Page 1/1

Page 116 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 116 · click to enlarge
Page 116

TO USE A USB DEVICE

Using the remote control

RED Display the selected photo file.

GREEN Mark all photo files on the screen.

YELLOW Deselect all marked photo files.

BLUE Exit the Mark Mode.

Return to normal TV viewing.

TO USE A USB DEVICE

Page 117 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 117 · click to enlarge
Page 117

How to view photo

Detailed operations are available on full-sized photo view screen.

Page 1/1 Photo List

002 003 004 005 006 007 008 009

010 011 012 013 014 015

Mark MARK View Page Change Move P

To Music List Change Numbers Mark Mode Exit

LG Electronics 32LD4 — How to view photo diagram (page 117)
Fig. 203 · How to view photo

01_a.jpg 2008/12/10 1920 x 1080 479 KB

TO USE A USB DEVICE

The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Press the EXIT button to move to the previous menu screen.

Slideshow ► BGM ■

Hide Option Q.MENU

  • Use the P button to navigation in the photo page. 1

Select the target folder or drive.

Select the desired photos.

The selected photo is displayed in full size.

  • Press the EXIT button to go back to Photo List.
  • Press the BACK button to make Help OSD disappear.
Show 4 more labels / short text on this page
Drive1 Page 1/1 · ◄ ► · 2/13 ◄ ► · Exit
Page 118 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 118 · click to enlarge
Page 118

TO USE A USB DEVICE

01_a.jpg 2008/12/10 1920 x 1080 479 KB

Select the Slideshow,

BGM, ꘤ (Rotate),

(ZOOM IN), , Option, Hide or Exit.

  • Use button to select the previous or next photo.
  • Use button to select and control the menu on the full-sized screen.

Slideshow ► BGM ■

Hide Option Q.MENU

► SlideshowWhen no picture is selected, all photos in the cur-

rent folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in Option.

TO USE A USB DEVICE

► BGM (Background Music)Listen to music while viewing photos

in full size. ■ Set the BGM device and album in Options before using

this function. ■ You can adjust Option by Q.MENU or MENU button on

the remote control.

► ꘤ (Rotate) : Rotate photos.

  • Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise.
  • It can not be rotate when the width of a picture is bigger

than supported height.

(ZOOM IN): View the photo by zoom in 2, 4 times.

►Press the ENERGY SAVING button repeatedly to

change the brightness of your screen.(Refer to p. 95)

►Option : Set values for Slide Speed and BGM.

  • Use button and OK button to set values. Press

OK to save the settings. ■ You cannot change BGM while BGM is playing.

►Hide : Hide the menu on the full-sized screen.

  • To see the menu again on the full-sized screen, press

OK button to display.

Press the EXIT button to go back to Photo List.

Show 4 more labels / short text on this page
◄ ► · 2/13 ◄ ► · Exit · ►
Page 119 of the LG Electronics 32LD4 user manual — NOTE
Page 119 · click to enlarge
Page 119

Using the Photo List function

01_a.jpg 2008/12/10 1920 x 1080 479 KB

Choose options.

Set Photo View.

Set Video.

Set Audio.

Slideshow ► BGM ■

Hide Option Q.MENU

Show the Option menu.

TO USE A USB DEVICE

Select Set Photo View., Set Video. or Set Audio..

NOTE

►Option values changed in Movie List does not affect Photo List and Music List.

►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List

excluding Movie List.

Show 5 more labels / short text on this page
◄ ► · Close · 2/13 ◄ ► · Exit · or
Page 120 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 120 · click to enlarge
Page 120

TO USE A USB DEVICE

  • When you select the Set Photo View,

Set Photo View.

Fast Slide Speed ◄ ►

BGM

On ● Repeat ◄ ►

Off ● Random ◄ ►

Select Slide Speed or BGM.

Make appropriate adjustments.

TO USE A USB DEVICE

Drive1 · Previous

Page 121 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 121 · click to enlarge
Page 121
  • When you select the Set Video,

Set Video.

  • Backlight 70
  • Contrast 100
  • Brightness 50
  • Colour 60
  • Dynamic Contrast
  • Edge Enhancer High ◄ ►
  • Noise Reduction Medium ◄ ►

TruMotion Low ◄ ►

TO USE A USB DEVICE

Select Picture Mode or TruMotion.

Make appropriate adjustments. (Refer to p. 96 to103)

Show 10 more labels / short text on this page
Picture Mode · Standard ◄ ► · ◄ ► · ◄ · ◄ ► · ◄ ► · Medium ◄ ► · (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***) · Picture Reset · Previous
Page 122 of the LG Electronics 32LD4 user manual — L R ◄ ►
Page 122 · click to enlarge
Page 122

TO USE A USB DEVICE

  • When you select the Set Audio,

Set Audio.

Standard Sound Mode ◄ ►

Off Auto Volume ◄ ►

Off Clear Voice II

L R ◄ ►

TO USE A USB DEVICE

Select Sound Mode, Auto Volume, Clear Voice II or Balance.

Make appropriate adjustments. (Refer to p. 107 to 111)

◄ ► · Balance 0 · Previous

Page 123 of the LG Electronics 32LD4 user manual — Select MY MEDIA . Select Music List. 2 1
Page 123 · click to enlarge
Page 123

MUSIC LIST

You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.

  • MUSIC (*.MP3) supporting file Bit rate 32 to 320
  • Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
  • Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
  • Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz

Screen Components

TO USE A USB DEVICE

You can also adjust USB in the INPUT menu.

Select MY MEDIA . Select Music List. 2 1

Preview: If any album jacket for the file(Album Art Image) exists, this jacket is displayed. Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on 2

Page 1/1 Music List

1. - B01.mp3
2. - B02.mp3
3. - B03.mp3
4. - B04.mp3

00:00

00:00

00:00

00:00

5. - B05.mp3

00:00

Current page/ total pages of contents under the folder focused on 2

Mark MARK Play Page Change Move P

Change Numbers Mark Mode Exit

(Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336)

Drive1 Page 1/1 · To Movie List

Page 124 of the LG Electronics 32LD4 user manual — Using the remote control
Page 124 · click to enlarge
Page 124

TO USE A USB DEVICE

Music Selection

Page 1/1 Music List

1. - B01.mp3
2. - B02.mp3
3. - B03.mp3
4. - B04.mp3

00:00

00:00

00:00

00:00

5. - B05.mp3

00:00

Mark MARK Play Page Change Move P

Change Numbers Mark Mode Exit

  • When playing music files
  • Use the P button to navigate up/down in the music page.

Select the target folder or drive.

TO USE A USB DEVICE

Select the desired music title.

Music files are played.

Using the remote control

GREEN Repeatedly, press the GREEN button to converted to Movie List->Photo List.

YELLOW A method to view in 5 large thumbnail or simple list.

BLUE Convert to Mark Mode.

Return to normal TV viewing.

Drive1 Page 1/1 · To Movie List

Page 125 of the LG Electronics 32LD4 user manual — RED
Page 125 · click to enlarge
Page 125
  • When selected music files are played

Page 1/1 Music List

1. - B01.mp3
2. - B02.mp3
3. - B03.mp3
4. - B04.mp3

00:00

00:00

00:00

00:00

5. - B05.mp3

00:00

Mark MARK Mark Page Change Move P

Exit Mark Mode Unmark All Mark All Play Marked Exit

  • When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.

TO USE A USB DEVICE

Select the target folder or drive.

Select the desired music title.

or BLUE Convert to Mark Mode.

  • If you want to activate Random playback, you must set Option->Set audio play.->Random to On .

Mark desired music file.

5 Marked music file is played.

RED

Mark Mode · Drive1 Page 1/1

Page 126 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 126 · click to enlarge
Page 126

TO USE A USB DEVICE

Using the remote control

RED Display the selected music file.

GREEN Mark all music files on the screen.

YELLOW Deselect all marked music files.

BLUE Exit the Mark Mode.

Return to normal TV viewing.

TO USE A USB DEVICE

Page 127 of the LG Electronics 32LD4 user manual — NOTE
Page 127 · click to enlarge
Page 127

Using the Music List function, play

Page 1/1 Music List

Drive1 Page 1/1 3 file(s) Marked

Choose options.

Set Audio Play.

Set Audio.

4. - B04.mp3
5. - B05.mp3
6. - B06.mp3
7. - B07.mp3
8. - B08.mp3

00:00

00:00

00:00

00:00

00:00

► 02:30 / 03:25 ◄►

5. - B05.mp3
  • ► II ◄◄►►

Hide Exit Option Q.MENU Play with Photo

Show the Option menu.

TO USE A USB DEVICE

Select Set Audio Play. or Set Audio.

NOTE

►Option values changed in Movie List does not affect Photo List and Music List.

►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List

excluding Movie List.

► · Close · or

Page 128 of the LG Electronics 32LD4 user manual — SAVING
Page 128 · click to enlarge
Page 128

TO USE A USB DEVICE

Using the remote control

  • Stop the playing music file. ► Press the PLAY( ► ) button to return to normal playback.

When you press the Pause(II) button while playing the file, the playback will be paused. When you press the Pause(II) button again while the playback is paused, it will resume the playback.

When playing, When you press the REW(◄◄) button, the previous music file will be played. When you press the FF(►►) button, the next music file will be played.

GREEN Start playing the selected music files and then move to the Photo List.

ENERGY

Press the ENERGY SAVING button repeatedly to change the brightness of your screen.(Refer to p. 95) Only Off/Screen Off operates from the Movie List, Photo List, Music List.

SAVING

TO USE A USB DEVICE

Show the Option menu.

  • When you press the Back button while the music is playing, the music player cur-

rently playing will be hidden and only the music list will be displayed.

  • When you press the Exit button while the Music player is displayed, only the

music will be stopped and the player will not return to normal TV viewing. ■When you press the Exit button while the music is stopped or while the music

player is hidden, the player will return to normal TV viewing.

< > ■When using the < or > button during playback a cursor indicating the position can

be played.

◄◄ / ►► · or

Page 129 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 129 · click to enlarge
Page 129
  • When you select the Set Audio Play,

Set Audio Play.

On Repeat ◄ ►

Off Random ◄ ►

Select Repeat or Random.

Make appropriate adjustments.

TO USE A USB DEVICE

Previous

Page 130 of the LG Electronics 32LD4 user manual — L R ◄ ►
Page 130 · click to enlarge
Page 130

TO USE A USB DEVICE

  • When you select the Set Audio,

Set Audio.

Standard Sound Mode ◄ ►

Off Auto Volume ◄ ►

Off Clear Voice II

L R ◄ ►

TO USE A USB DEVICE

Select Sound Mode, Auto Volume, Clear Voice II or Balance.

Make appropriate adjustments. (Refer to p. 107 to 111)

◄ ► · Balance 0 · Previous

Page 131 of the LG Electronics 32LD4 user manual — TO USE A USB DEVICE
Page 131 · click to enlarge
Page 131
  • If you don't press any button for a while during the playing, the

play information box (as shown in the below) will float as a screen saver. ■The ‘Screen Saver’?

Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.

2. B02.mp3 ► 00:31 / 04:04

NOTE

►A damaged or corrupted music does not play but displays 00:00 in playtime.

►A music downloaded from a paid service with copyright protection does not start but displays inappropriate

information in playtime.

►If you press OK, ■ buttons, screen saver is stopped.

TO USE A USB DEVICE

►The PLAY(►), Pause(II), ■ , ►►, ◄◄ buttons on the remote control are also available in this mode.

►You can use the ►► button to select the next music and the ◄◄ button to select the previous music.

Page 132 of the LG Electronics 32LD4 user manual — NOTE
Page 132 · click to enlarge
Page 132

TO USE A USB DEVICE

DIVX REGISTRATION CODE (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.)

You must register your device to

MY MEDIA

DivX Reg.Code

play DivX protected videos. Registration code : ********** Register at http://vod.divx.com

Movie List Music List

Exit Option Press OK( ) to see photos from the USB.

TO USE A USB DEVICE

Select MY MEDIA.

BLUE 2

Select DivX Reg. Code.

Display DivX Reg. Code.

  • Press the MENU/EXIT button to return to normal TV viewing.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be reg- istered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

“DivX Certified to play DivX video up to HD 1080p, including premium content”

“Pat. 7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

►Movie files are supported as follows Resolution : under 1920x1080 WxH pixels Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)

►Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00,

Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264.

Show 4 more labels / short text on this page
Deactivation · Previous · Photo List · Close
Page 133 of the LG Electronics 32LD4 user manual — BLUE 2
Page 133 · click to enlarge
Page 133

DEACTIVATION (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336) The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion. Now with this added feature, consumers will be able to deactivate the device themselves and hence better manage their DivX VOD devices.

MY MEDIA

DivX Reg.Code

Deregistration code :

******** Deregister at http://vod.divx.com

Movie List Music List

Exit Option Press OK( ) to see photos from the USB.

TO USE A USB DEVICE

Select MY MEDIA.

BLUE 2

Select Deactivation.

Select Yes.

Display Deactivation.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
Deactivation · Continue with registration? · Photo List · Previous · Yes No
Page 134 of the LG Electronics 32LD4 user manual — DTV 2 TV2
Page 134 · click to enlarge
Page 134

EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)

This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.

The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).

This function can be used only when the EPG information is broadcast by broadcasting companies. You must set the Clock in the Time menu, before using EPG function.

The EPG displays the programme details for 8 days.

DTV 1 TV ONE

Watch ► Next Pr. Change

21:00 00:00 Show/Game Show

16:9 HE-AAC 720p ...

Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking, with regular and special guests. Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,

ith with reg lular d and spe p i l cial gue g tsts. sts.

Shows current programme information

Displayed with a TV or DTV Programme.

Displayed with a Teletext Programme.

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

Displayed with a Radio Programme.

Displayed with a Subtitle Programme.

Displayed with a MHEG Programme.

Displayed with a Scramble Programme.

HE-AAC

Displayed with a HE-AAC Programme.

Displayed with a Dolby Digital Programme.

Aspect ratio of broadcasting programme.

Displayed with a Dolby Digital PLUS Programme.

Aspect ratio of broadcasting programme. 576i/p, 720p, 1080i/p : Resolution of broadcasting programme

Broadcasted programme with the icon may not be displayed in Monitor Out depending on the informa- tion of the programme.

Shows next programme information.

Shows other programme information.

2 TV2

28 Sep. 2008 21:00~00:00

DTV 2 TV2

Schedule ◄ Now Pr. Change

21:00 00:00 Show/Game Show

Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna. Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.

A pop-up window for record/remind settings appear.

Select Timer Record/Remind setting mode.

Show 13 more labels / short text on this page
► · ► · Good Morning · Up · ▼ · Down · Tyra · Record · ► · Remind · ► · Tyra · Close
Page 135 of the LG Electronics 32LD4 user manual — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Page 135 · click to enlarge
Page 135

Switch on/off EPG

Switch on or off EPG.

Select a programme

Select desired programme.

Button Function in NOW/NEXT Guide Mode

You can view a program being broadcasted and one scheduled to follow.

LG Electronics 32LD4 — Button Function in NOW/NEXT Guide Mode diagram (page 135)
Fig. 204 · Button Function in NOW/NEXT Guide Mode

RED Change EPG mode.

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

YELLOW Enter Manual Timer mode.

1 YLE TV1 Keno World Business 2 YLE TV2

BLUE Enter Schedule List mode.

When ‘Now’ is selected, it is moved to selected program and EPG disappears When ‘Next’ is selected, a reservation pop-up window appears.

Select NOW or NEXT Programme.

Select the Broadcast Programme.

Page Up/Down.

or

Page 136 of the LG Electronics 32LD4 user manual — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Page 136 · click to enlarge
Page 136

EPG (ELECTRONIC PROGRAMME GUIDE)

Button Function in 8 Day Guide Mode

LG Electronics 32LD4 — Button Function in 8 Day Guide Mode diagram (page 136)
Fig. 205 · Button Function in 8 Day Guide Mode

RED Change EPG mode.

Kungskonsumente Mint Extra The Drum TV2: Farmen The Drum You Call The Hits Fashion Essentials Tänään otsikoissa

GREEN Enter Date setting mode.

YELLOW Enter Manual Timer mode.

BLUE Enter Schedule List mode.

When ‘Currently broadcasting programme is selected, it is moved to selected pro- gramme and EPG disappears When ‘Future broadcasting programme is selected, a reservation pop-up window appears.

Select Programme.

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

Select the Broadcast Programme.

Page 137 of the LG Electronics 32LD4 user manual — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Page 137 · click to enlarge
Page 137

Button Function in Date Change Mode

LG Electronics 32LD4 — Button Function in Date Change Mode diagram (page 137)
Fig. 206 · Button Function in Date Change Mode
LG Electronics 32LD4 — Button Function in Date Change Mode diagram (page 137)
Fig. 207 · Button Function in Date Change Mode

Switch off Date setting mode.

Kungskonsumente Mint Extra The Drum TV2: Farmen The Drum You Call The Hits Fashion Essentials Tänään otsikoissa

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

Button Function in Extended Description Box

LG Electronics 32LD4 — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) diagram (page 137)
Fig. 208

DTV 1 YLE TV1 25 25 Nov. 2008 10:05

The detail information on or off.

Fia World Touring Car Chanpionship Tue. 25 Nov. 2008 10:05 12:40

Fia Champion Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/Cry of The Swamp;

Text Up/Down.

Select Timer Record/Remind setting mode.

or Switch off EPG.

Page 138 of the LG Electronics 32LD4 user manual — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Page 138 · click to enlarge
Page 138

EPG (ELECTRONIC PROGRAMME GUIDE)

Button Function in Record/Remind Setting Mode

Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable. Recording function is only supported in the Digital mode and not in the Analogue mode.

Switch off Manual Timer mode.

Wed. 12 Aug. 2009 13:46 Select the date to schedule.

Sun.

Mon. Tue. Wed. Thu. Fri. Sat.

Wed. 12 Aug. 2009

Select a schedule type

Select Remind or Record function setting.

12 13 14 15

Select Type, Start Time, End time or Programme.

15. 09 Record Close
17. 30 DTV 801 ANTV D...

OK Prev.

YELLOW Change to Guide mode.

OK

Programme Guide Schedule List

BLUE Change to Schedule List mode.

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

Save Timer Record/Remind.

Show 8 more labels / short text on this page
Manual Timer · 09 10 11 · Start Time Type · End Time Programme · No schedule list · ▲ · ▼ · Exit Move
Page 139 of the LG Electronics 32LD4 user manual — EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Page 139 · click to enlarge
Page 139

Button Function in Schedule List Mode

If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Currently recording item cannot be edited or deleted.

LG Electronics 32LD4 — Button Function in Schedule List Mode diagram (page 139)
Fig. 209 · Button Function in Schedule List Mode

Page1/1 Fri. 6 Apr. 2007 15:09

Title Repeat Start Date

YELLOW Change to Manual Timer mode.

6 May 16:00 Friend1

Friend2 16:00

6 May 18:00 Friend2

Change to Guide mode.

Remind DTV 19 Dave (Fri.)06/05/2007 16:00

Switch off Schedule List.

Page Change P Move ꔀ

Manual Timer Programme Guide

Select your desired Option(Modify/Delete/ Delete All).

EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)

Select programme.

Page Up/Down.

Show 10 more labels / short text on this page
Schedule List · Start Time · Modify · Modify · BLUE or · ► · Delete · Delete All · Close · Exit Modify/Delete
Page 140 of the LG Electronics 32LD4 user manual — Just Scan
Page 140 · click to enlarge
Page 140

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.

If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.

You can adjust the enlarge proportion using button.

This function works in the following signal.

  • You can also adjust Aspect Ratio in the PICTURE menu.

Select Aspect Ratio.

2 Select the desired picture format.

  • For Zoom Setting, select 14:9 , Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu.
  • 16:9 The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).
  • Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast.

PICTURE CONTROL

LG Electronics 32LD4 — PICTURE CONTROL diagram (page 140)
Fig. 210
LG Electronics 32LD4 — PICTURE CONTROL diagram (page 140)
Fig. 211

Original

  • Just Scan Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note : If there is noise in original Picture, You can see the noise at the edge.
  • Full Wide

When TV receives the wide screen signal,it will lead you to adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully.

4:3 and 14:9 video is supported in full screen without any video distortion through DTV input.

LG Electronics 32LD4 — Original diagram (page 140)
Fig. 212 · Original
LG Electronics 32LD4 — Original diagram (page 140)
Fig. 213 · Original

Just Scan

Full Wide

Page 141 of the LG Electronics 32LD4 user manual — NOTE
Page 141 · click to enlarge
Page 141
  • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio.
  • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
LG Electronics 32LD4 — Picture Control diagram (page 141)
Fig. 214 · Picture Control
LG Electronics 32LD4 — Picture Control diagram (page 141)
Fig. 215 · Picture Control
  • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down.
  • Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note:When enlarging or reducing the picture, the image may become distorted.
LG Electronics 32LD4 — Picture Control diagram (page 141)
Fig. 216 · Picture Control
LG Electronics 32LD4 — Picture Control diagram (page 141)
Fig. 217 · Picture Control

PICTURE CONTROL

◄ or ► button: Adjust enlarge proportion of Cinema Zoom. The adjustment range is 1 to 16. ▼ or ▲ button: Move the screen.

NOTE

►You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.

►You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.

►You can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.

►In DTV/HDMI/Component (over 720p) mode, Just Scan is available.

►In Analogue/DTV/AV/Scart mode, Full Wide is available.

Page 142 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 142 · click to enlarge
Page 142

PICTURE CONTROL

PICTURE WIZARD

This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.

In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.

LG Electronics 32LD4 — PICTURE CONTROL diagram (page 142)
Fig. 218

PICTURE

With Picture Wizard, you can adjust the picture quality of the original image.

  • Aspect Ratio : 16:9
  • Picture Wizard
  • Picture Wizard
  • Energy Saving : Off
  • Picture Mode : Standard
  • Backlight 70
  • Contrast 100
  • Brightness 50
  • Sh
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 0 70 70 70

PICTURE CONTROL

  • If you stop the setting before the final stage, the changes will not be applied

Select PICTURE.

  • The adjustment value is saved to Expert1.
  • Once the Picture Wizard sets the image quality, the Energy Saving is changed into Off.

Select Picture Wizard.

  • If the picture quality setting of Expert1 is changed, use the Picture Reset before entering the Picture Wizard to reset the picture quality setting.
  • Standard : mode to set standard picture quality.
  • Preferred : mode to set user preferred picture quality rather than standard picture.

Adjust Standard(Black Level, White Level, Tint, Colour, Horizontal Sharpness, Vertical Sharpness, Backlight) or Preferred(Black Level, White Level, Tint, Colour, Sharpness, Dynamic Contrast, Colour Temperature, Backlight).

Select input source to apply the settings.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
Picture Wizard · OK Move · ► · ► · Next Previous
Page 143 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 143 · click to enlarge
Page 143

ENERGY SAVING

It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.

PICTURE

PICTURE

  • Aspect Ratio : 16:9
  • Aspect Ratio : 16:9
  • Picture Wizard
  • Picture Wizard
  • ꕊ Energy Saving : Off
  • Energy Saving : Off
  • ꕊ Energy Saving : Off
  • Energy Saving : Off
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Backlight 70
  • Backlight 70
  • Contrast 100
  • Contrast 100
  • Brightness 50
  • Brightness 50
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 70 70 70
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 70 70 70

PICTURE CONTROL

Select PICTURE.

Select Energy Saving.

Select Auto(Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)., Off, Minimum , Medium, Maximum or Screen Off.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
  • If you adjust “ Energy Saving-Auto , Maximum ”, Backlight feature will not work.
  • You can also adjust this feature by selecting Energy Saving button on the remote control.
  • When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the surrounding condition when intelligent sensor is in the TV. (Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***).
Show 13 more labels / short text on this page
OK Move · OK Move · Auto · ► · Off · Off · ► · ► · ► · Minimum · Medium · Maximum · Screen Off
Page 144 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 144 · click to enlarge
Page 144

PICTURE CONTROL

PRESET PICTURE SETTINGS

Picture Mode-Preset

Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games.

PICTURE

PICTURE

  • Aspect Ratio : 16:9
  • Aspect Ratio : 16:9
  • Picture Wizard
  • Picture Wizard
  • Energy Saving : Off
  • Energy Saving : Off
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Backlight 70
  • Backlight 70
  • Contrast 100
  • Contrast 100
  • Brightness 50
  • Brightness 50
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 70 70 70
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 70 70 70

PICTURE CONTROL

Select PICTURE.

Select Picture Mode.

Select Intelligent Sensor(Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***), Vivid, Standard, Cinema, Sport or Game.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category.
  • When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
  • You can also adjust Picture Mode in the Q. Menu .
  • Intelligent Sensor : Adjusts picture according to the surrounding conditions.
Show 15 more labels / short text on this page
OK Move · OK Move · Intelligent Sensor · Vivid · ► · Standard · Standard · ► · ► · ► · Cinema · Sport · Game · Expert1 · Expert2
Page 145 of the LG Electronics 32LD4 user manual — NOTE
Page 145 · click to enlarge
Page 145

MANUAL PICTURE ADJUSTMENT

Picture Mode-User option

Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Colour Adjusts intensity of all colours. Tint Adjusts the balance between red and green levels. Colour Temp. Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.

It is not available to use this function in “Intelligent Sensor” (Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***).

PICTURE

PICTURE

  • Aspect Ratio : 16:9
  • Aspect Ratio : 16:9
  • Picture Wizard
  • Picture Wizard
  • Energy Saving : Off
  • Energy Saving : Off
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Picture Mode : Standard
  • Backlight 70
  • Backlight 70

PICTURE CONTROL

  • Contrast 100
  • Contrast 100
  • Brightness 50
  • Brightness 50
  • Sh
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 0 70 70 70
  • Sh
  • Sh
  • Sh Sh arpn arpn arpn ess ess ess 0 70 70 70
  • Benefits of using Backlight - The electricity consumption is reduced by

Select PICTURE.

up to 60 %. - The black brightness is reduced. (As the

Select Picture Mode.

black has greater depth, you can enjoy a better quality definition.) - You can adjust brightness with maintaining

Select Vivid, Standard, Cinema, Sport or Game.

original signal resolution.

Select Backlight, Contrast, Brightness, Sharpness, Colour, Tint or Colour Temp.. 5

Make appropriate adjustments.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

NOTE

►You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.

►When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V

Sharpness, Colour or Tint.

Show 15 more labels / short text on this page
OK Move · OK Move · Intelligent Sensor · Vivid · ► · ► · Standard · Standard · ► · ► · Cinema · Sport · Game · ꕋ Expert1 · ꕋ Expert2
Page 146 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 146 · click to enlarge
Page 146

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode.

Image shown may differ from your TV.

LG Electronics 32LD4 — PICTURE CONTROL diagram (page 146)
Fig. 219
  • Sh Sh Sh
  • Sh
  • Sh
  • Sh
  • Sh Sh Sh S arpn arpn arpn arpn arpn arpn a p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70
  • Sh Sh Sh
  • Sh
  • Sh
  • Sh
  • Sh Sh Sh arpn arpn arpn arpn arpn arpn arpn p ess ess ess ess ess ess ess 0 70 70 70 70 70 70 70 70
  • Colour 60
  • Tint 0

R G

  • Colour Temp. 0

W C

  • Advanced Control
  • Advanced Control
  • Picture Reset
  • TruMotion
  • Screen

PICTURE CONTROL

LG Electronics 32LD4 — PICTURE CONTROL diagram (page 146)
Fig. 220

Select your desired Source.: Dynamic Contrast, Dynamic Colour, Clear White, Skin Colour, Noise Reduction, Digital Noise Reduction, Gamma, Black Level, Eye Care, Real Cinema, Colour Gamut or xvYCC. (Refer to p. 100 to 101) 4

Make appropriate adjustments.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 4 more labels / short text on this page
OK Move PICTURE · OK Move PICTURE · ► · ►
Page 147 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 147 · click to enlarge
Page 147

EXPERT PICTURE CONTROL

By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.

Image shown may differ from your TV.

LG Electronics 32LD4 — EXPERT PICTURE CONTROL diagram (page 147)
Fig. 221

PICTURE

  • H H Sh Sh Shar Shar Shar Shar Shar Shar Shar pnes pnes pnes pnes pnes pnes pnes p 70 70 s 70 s 70 s 70 s 70 s 70 s 70 s 70
  • Aspect Ratio : 16:9
LG Electronics 32LD4 — PICTURE diagram (page 147)
Fig. 222
  • H H Shar Shar Shar pnes pnes pnes s 70 s 70 s 70
LG Electronics 32LD4 — PICTURE diagram (page 147)
Fig. 223

PICTURE CONTROL

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

OK Move

Page 148 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 148 · click to enlarge
Page 148

PICTURE CONTROL

*This feature is not available for all models.

  • Adjusts the contrast to keep it at the best level according to the brightness of

the screen. The picture is improved by making bright parts brighter and dark parts darker.

  • Adjusts screen colours so that they look livelier, richer and clearer. This fea-

ture enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Skin Colour

(-5 to 5) ■Adjusts skin colour of the picture so that user can set his favourite skin colour.

Noise Reduction (Off/Low/Medium/High/ Auto(In Analogue Mode

  • Reduces screen noise without compromising video quality.

Digital Noise Reduction (Low/Medium/High/Off) ■Reduces noise regarding MPEG compressed video.

Gamma (Advanced Control:

  • You can adjust brightness of dark area and middle gray level area of the picture.
  • Low/1.9 : Makes dark and middle gray level area of the picture brighter.
  • Medium/2.2 : Expresses original picture levels.
  • High/2.4 : Make dark and middle gray level area of the picture darker.

Expert Control:

1.9/2.2/2.4 )

PICTURE CONTROL

  • Low : The picture of the screen gets darker.
  • High : The picture of the screen gets brighter.
  • Auto : Sets black level of the screen to High or Low automatically according to the input signal level.
  • Set black level of the screen to proper level.
  • This function enables to select 'Low' or 'High' in the following mode:

AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'. Clear White (Off/Low/High) ■Makes the white area of the screen brighter and clearer.

*This feature is not available for all models. ■Adjusts the brightness of the screen automatically to the best level for

eyes when the screen is too bright. ■This feature is disable in “Picture Mode-Vivid, Cinema, Expert1, Expert2,

Intelligent Sensor(Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)”.

  • You can watch a cinema-like video by eliminating judder effect.
  • Use this function when you watch film-originated movie contents.
  • This function can work when TruMotion is off.
Show 9 more labels / short text on this page
Dynamic Contrast (Off/Low/Medium/High) · Dynamic Colour · (Off/Low/High ) · Only)) · Low/Medium/High · Black Level (Low/High/Auto) · Eye Care (Low/High/Off) · Real Cinema · (On/Off)
Page 149 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 149 · click to enlarge
Page 149
  • Standard : Mode to use original colour area regardless of the display characteristics.

Colour Gamut (Advanced Control:

  • Wide: Mode to use maximum colour area of the TV display.
  • Maximize the utilization for colour area that can be expressed.
  • Standard : Mode to use original colour area regardless of the display characteristics.
Colour Gamut (Expert ControlEBU/
  • Wide : Mode to use maximum colour area of the TV display.
  • EBU : Mode to display EBU colour area.
  • SMPTE : Mode to display SMPTE colour area.
  • BT709 : Mode to display BT709 colour area. Edge Enhancer
  • Makes the edge of the picture clearer and distinctive.
  • This function can use in “Picture Mode-Expert.”

*This feature is not available for all models. ■This is the function to express richer colour.

  • This function is enabled in "Picture mode - Cinema, Expert" when xvYCC sig-

nal is inputted through HDMI Expert Pattern (Off/Pattern1/Pattern2)

  • This is the pattern necessary for checking the picture of Digital TV.
  • This function is enabled in "Picture Mode - Expert" when you watch DTV. Colour Filter (Off/Red/Green/Blue)
  • This is the function to filter the specific colours of the video. You can use the RGB filter to set colour saturation and hue accurately.

PICTURE CONTROL

  • This is the function to adjust the overall colour of the screen to the feeling you want. a.
  • Method : 2 Points
  • Pattern: Inner, Outer
  • Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 to +50. b.
  • Method : 10 point IRE
  • Pattern: Inner / Outer
  • IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 to 100. You can adjust Red, Green or Blue according to each setting.
  • Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
  • Red/Green/Blue: The adjustment range is -50 to +50.
  • As the tool used by the experts to make adjustments by using the test pat-

terns, this does not affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow). Colour difference may not be distinctive even when you make the adjust- ments for the general video. ■Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.

  • Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range is -30 to +30.
  • Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is -30 to +30.
  • This feature is disable in RGB-PC and HDMI (PC) mode.
Show 8 more labels / short text on this page
Wide/Standard) · SMPTE/BT709/Wide/ · Standard) · (Off/Low/High) · xvYCC (Auto/off/on) · Colour Temperature (Medium/Warm/Cool) · Colour Management · System
Page 150 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 150 · click to enlarge
Page 150

PICTURE CONTROL

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

  • Sh Sh
  • Sh
  • Sh Sh arpn arpn arpn arpn p ess ess ess ess 70 70 70 70 70
  • Sh Sh
  • Sh
  • Sh Sh arpn arpn arpn arpn p ess ess ess ess 70 70 70 70 70
  • Colour 60
  • Colour 60
  • Tint 0

R G

  • Tint 0

All picture setting will be reset.

R G

  • Colour Temp. 0

W C

  • Colour Temp.

W C

  • Advanced Control
  • Advanced Control
  • Picture Reset
  • Picture Reset
  • Picture Reset
  • Picture Reset
  • TruMotion
  • TruMotion
  • Screen
  • Screen
LG Electronics 32LD4 — W C diagram (page 150)
Fig. 224

PICTURE CONTROL

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
OK Move PICTURE · OK Move PICTURE · ? · Continue? · ► · Yes No · ►
Page 151 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 151 · click to enlarge
Page 151

TRUMOTION (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***)

It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source.

High: Provide smoother picture movement. Low : Provide smooth picture movement. Use this setting for standard use. Off: Turn off TruMotion Operation. User: User can adjust Judder and Blur level in TruMotion Operation, separately. - Judder: Adjust noise of the screen. - Blur: Adjust after-image of the screen.

This feature is disable in RGB-PC,HDMI-PC mode. If you enable "TruMotion", noise may appear on the screen. If this occurs, set "TruMotion" to "Off". If you select “Picture Mode-Game ”, set “TruMotion" to "Off".

  • Sh Sh
  • Sh
  • Sh Sh arpn arpn arpn arpn p ess ess ess ess 70 70 70 70 70

TruMotion ◄ Low ►

  • Colour 60
  • Tint 0

R G

  • Judder 3
  • Colour Temp. 0

W C

  • Blur 3
  • Advanced Control
  • Picture Reset

OK

  • TruMotion
  • TruMotion

PICTURE CONTROL

  • Screen

Select PICTURE.

Select TruMotion.

Select Low, High, User or Off.

Make appropriate adjustments.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

OK Move PICTURE · ► · ►

Page 152 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 152 · click to enlarge
Page 152

PICTURE CONTROL

POWER INDICATOR

Adjust the power/standby indicator light on the front of the TV.

Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on.

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK
  • Disability Assistance
  • Disability Assistance
  • Power Indicator
  • Power Indicator
  • Power Indicator
  • Power Indicator Standby Light
  • Factory Reset
  • Factory Reset
  • Set ID : 1
  • Set ID : 1
  • Mode Setting : Home Use
  • Mode Setting : Home Use

PICTURE CONTROL

Select OPTION.

Select Power Indicator.

Select Standby Light or Power Light.

Select your desired Source.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 8 more labels / short text on this page
OK Move · OK Move · ► · ◄ On ► · ► · Power Light · On · Close
Page 153 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 153 · click to enlarge
Page 153

MODE SETTING

We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores.

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK
  • Disability Assistance
  • Disability Assistance

Selecting the environment.

  • Power Indicator
  • Power Indicator

Choose the setting mode you want.

  • Factory Reset
  • Factory Reset

Select [Home Use] to use this TV at home. To use this TV at store, select [Store Demo].

  • Set ID : 1
  • Set ID : 1
  • Mode Setting : Home Use
  • Mode Setting : Home Use
  • Mode Setting : Home Use
  • Mode Setting : Home Use

Home Use Store Demo

  • Demo Mode

PICTURE CONTROL

Select OPTION.

Select Mode Setting.

Select Store Demo or Home Use.

Save.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
OK Move · OK Move · ► · Off · Close
Page 154 of the LG Electronics 32LD4 user manual — PICTURE CONTROL
Page 154 · click to enlarge
Page 154

PICTURE CONTROL

DEMO MODE

It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK
  • Disability Assistance
  • Disability Assistance

Selecting the environment.

  • Power Indicator
  • Power Indicator

Choose the setting mode you want.

  • Factory Reset
  • Factory Reset
  • Set ID : 1

Select [Store Demo] to use this TV in store. To use this TV at home, select [Home Use].

  • Set ID : 1
  • Mode Setting : Home Use
  • Mode Setting : Home Use
  • Mode Setting : Home Use
  • Mode Setting : Home Use

Home Use Store Demo

  • Demo Mode

PICTURE CONTROL

Select OPTION.

Select Mode Setting.

Select Store Demo.

Select On.

Move to the previous menu screen. If you want to stop the demo, press any button. (except for MUTE, + , - button)

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
OK Move · OK Move · ► · On · Close
Page 155 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 155 · click to enlarge
Page 155

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER

Auto Volume automatically remains on the same level of volume if you change programmes.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme. If sound quality or volume is not at the level you want, it is recommended to use a separate home the- ater system or amp to cope with different user environments.

LG Electronics 32LD4 — SOUND & LANGUAGE CONTROL diagram (page 155)
Fig. 225

AUDIO

AUDIO

MHEG

  • Auto Volume : Off
  • Auto Volume : Off
  • Auto Volume : Off
  • Auto Volume : Off
  • Clear Voice II : Off 3
  • Clear Voice II : Off 3
  • Balance 0

L R

  • Balance 0

L R

  • Sound Mode : Standard
  • Sound Mode : Standard
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set

Select AUDIO.

Select Auto Volume.

SOUND & LANGUAGE CONTROL

Select On or Off.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
OK Move · OK Move · Off · ► · ► · On
Page 156 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 156 · click to enlarge
Page 156

SOUND & LANGUAGE CONTROL

CLEAR VOICE II

By differentiating the human sound range from others, it helps users listen to human voices better.

AUDIO

AUDIO

  • Auto Volume : Off
LG Electronics 32LD4 — AUDIO diagram (page 156)
Fig. 226
  • Clear Voice II : Off 3
  • Clear Voice II : Off 3
  • Balance 0

L R

  • Sound Mode : Standard
  • Infinite Sound : Off
  • Treble 50
  • Bass 50
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set
  • R e
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set set
LG Electronics 32LD4 — L R diagram (page 156)
Fig. 227
  • If you select “ On ” for Clear Voice II , Infinite Sound feature will not work.

SOUND & LANGUAGE CONTROL

LG Electronics 32LD4 — SOUND & LANGUAGE CONTROL diagram (page 156)
Fig. 228
  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 4 more labels / short text on this page
OK Move · OK Move · ► · ►
Page 157 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 157 · click to enlarge
Page 157

PRESET SOUND SETTINGS-SOUND MODE

You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro- priate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.

Standard Offers standard-quality sound. Music Optimizes sound for listening to music. Cinema Optimizes sound for watching movies. Sport Optimizes sound for watching sports events. Game Optimizes sound for playing games.

AUDIO

AUDIO

  • Auto Volume : Off
  • Auto Volume : Off
  • Clear Voice II : Off 3
  • Clear Voice II : Off 3
  • Balance 0
  • Balance 0

L R

  • Sound Mode : Standard
  • Sound Mode : Standard
  • Sound Mode : Standard
  • Sound Mode : Standard
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • R e
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set set
  • R e
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set set
  • You can also adjust Sound Mode in the Q. Menu . 1

Select AUDIO.

SOUND & LANGUAGE CONTROL

Select Sound Mode.

Select Standard, Music, Cinema, Sport or Game.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 11 more labels / short text on this page
OK Move · OK Move · L R Standard · Standard · ► · ► · Music · ► · Cinema · Sport · Game
Page 158 of the LG Electronics 32LD4 user manual — INFINITE SOUND
Page 158 · click to enlarge
Page 158

SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT -USER MODE

AUDIO

AUDIO

  • Auto Volume : Off
  • Auto Volume : Off
  • Clear Voice II : Off 3
  • Clear Voice II : Off 3
  • Balance 0

L R

  • Balance 0
  • Sound Mode : Standard
  • Sound Mode : Standard(User)
  • Sound Mode : Standard
  • Sound Mode : Standard(User)
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set

Select AUDIO.

Select Sound Mode.

Select Standard, Music, Cinema, Sport or Game.

Select Treble or Bass.

Set the desired sound level.

SOUND & LANGUAGE CONTROL

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

INFINITE SOUND

Select this option to sound realistic.

Infinite Sound : Infinite Sound is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers.

Select AUDIO.

Select Infinite Sound.

  • Select On or Off .
  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 11 more labels / short text on this page
OK Move · OK Move · L R Standard · Standard(User) · ► · Music · ► · ► · Cinema · Sport · Game
Page 159 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 159 · click to enlarge
Page 159

BALANCE

You can adjust the sound balance of the speakers to preferred levels.

AUDIO

AUDIO

  • Auto Volume : Off
  • Auto Volume : Off
  • Clear Voice II : Off 3
  • Clear Voice II : Off 3
  • Balance 0
  • Balance 0 L R
  • Balance 0 L R
  • Balance 0 ◄ ►
  • Balance 0

L R

  • Sound Mode : Standard
  • Sound Mode : Standard
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set
  • Re
  • Re
  • Re
  • Re Re Re t set set set set set set

Select AUDIO.

Select Balance.

SOUND & LANGUAGE CONTROL

Make desired adjustment.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 5 more labels / short text on this page
OK Move · OK Move · ► · ► · Close
Page 160 of the LG Electronics 32LD4 user manual — NOTE
Page 160 · click to enlarge
Page 160

SOUND & LANGUAGE CONTROL

TV SPEAKERS ON/ OFF SETUP

You can adjust the TV internal speaker status.

In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal.

If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.

AUDIO

AUDIO

  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Soun d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e : de : de : de : de : de : de : de : de : de : St St St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Soun d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e : de : de : de : de : de : de : de : de : de : St St St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Reset
  • Reset
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM
  • TV Speaker : On
  • TV Speaker : On
  • TV Speaker : On
  • TV Speaker : On
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto

Select AUDIO.

Select TV Speaker.

SOUND & LANGUAGE CONTROL

Select On or Off.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

NOTE

►When the TV speaker is turned off while the Simplink home theater is operating, the sound output automati-

cally switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the TV speaker.

►Some menus in AUDIO are disabled when TV Speaker is set to Off.

Show 7 more labels / short text on this page
OK Move · OK Move · Off · ► · ► · PCM On · ►
Page 161 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 161 · click to enlarge
Page 161

DTV AUDIO SETTING (IN DIGITAL MODE ONLY)

When different audio types exist in an input signal, this function allows you to select the audio type you want.

AUDIO

AUDIO

  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Soun d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e : de : de : de : de : de : de : de : de : de : S t St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Soun d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e : de : de : de : de : de : de : de : de : de : S t St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Reset
  • Reset
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM

HE-AAC

  • TV Speaker : On
  • TV Speaker : On
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto

MPEG

Select AUDIO.

Select DTV Audio Setting.

SOUND & LANGUAGE CONTROL

Select Auto, HE-AAC, Dolby Digital +, Dolby Digital or MPEG.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
  • Auto : Automatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital > MPEG . (Except for Italy) Auto : Automatically outputs in the order HE-AAC > Dolby Digital+ > MPEG > Dolby Digital . (Only Italy)
  • HE-AAC, Dolby Digital+, Dolby Digital, MPEG : Allows users to select the audio type they want. ex) If MPEG is selected, MPEG is always outputted. If MPEG is not supported, another audio type is set in that order.
  • Refer to p. 120 to 121 (Audio Language Selection)
Show 8 more labels / short text on this page
OK Move · OK Move · Auto · Auto · ► · Dolby Digital+ · ► · Dolby Digital
Page 162 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 162 · click to enlarge
Page 162

SOUND & LANGUAGE CONTROL

SELECTING DIGITAL AUDIO OUT

This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation). Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played.

AUDIO

AUDIO

  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Soun d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e : de : de : de : de : de : de : de : de : de : S t St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • S o n Soun Soun Soun Soun Soun Soun Soun Soun d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d e de : de : de : de : de : de : de : de : St St St Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar d
  • Infinite Sound : Off
  • Infinite Sound : Off
  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Reset
  • Reset
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM
  • TV Speaker : On

PCM PCM

  • TV Speaker : On
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Select AUDIO.

SOUND & LANGUAGE CONTROL

Select Digital Audio Out.

  • There is a possibility that when HDMI mode, some DVD players do not make SPDIF sound. At that time, set the output of the digital audio of the DVD player to PCM. (In HDMI, Dolby Digital Plus is not supported).

Select Auto or PCM.

Item Audio Input Digital Audio output

MPEG Dolby Digital Dolby Digital Plus HE-AAC

PCM Dolby Digital Dolby Digital PCM

MPEG Dolby Digital Dolby Digital Plus HE-AAC

PCM Dolby Digital Dolby Digital Dolby Digital

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 9 more labels / short text on this page
OK Move · OK Move · ► · Auto · ► · ► · Auto(Speaker On) · Auto(Speaker Off) · PCM All PCM
Page 163 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 163 · click to enlarge
Page 163

AUDIO RESET

Settings of the selected Sound Mode return to the default factory settings.

AUDIO

AUDIO

  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Sou d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d o d e : de : de : de : de : de : de : de : de : de S t St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar da d
  • S oun Soun Soun Soun Soun Soun Soun Soun Soun Sou d M d M d M d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d Mo d o d e : de : de : de : de : de : de : de : de : de S t St Sta Sta Sta Sta Sta Sta Sta Sta Sta Sta d ndar ndar ndar ndar ndar ndar ndar ndar ndar da d
  • Infinite Sound : Off
  • Infinite Sound : Off

All audio settings will be resetted.

  • Treble 50
  • Treble 50
  • Bass 50
  • Bass 50
  • Reset
  • Reset
  • Reset
  • Reset
  • Digital Audio Out : PCM
  • Digital Audio Out : PCM
  • TV Speaker : On
  • TV Speaker : On
  • DTV Audio Setting : Auto
  • DTV Audio Setting : Auto

Select AUDIO.

Select Reset.

SOUND & LANGUAGE CONTROL

Select Yes.

Initialize the adjusted value.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
OK Move · OK Move · ? · Continue? · ► · ► · Yes No
Page 164 of the LG Electronics 32LD4 user manual — Adjustment for Audio Description Volume With selecting On
Page 164 · click to enlarge
Page 164

SOUND & LANGUAGE CONTROL

AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)

This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio.

When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.

Volume Changes the Audio Description volume Beep Beeps when a programme with Audio Description information is selected

OPTION

OPTION

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK

Hard of Hearing( )

  • Disability Assistance
  • Disability Assistance
  • Disability Assistance
  • Disability Assistance
  • Power Indicator
  • Power Indicator

Audio Description ◄ On ►

  • Factory Reset
  • Factory Reset
  • Volume 0
  • Set ID : 1
  • Set ID : 1
  • Beep
  • Mode Setting : Home Use
  • Mode Setting : Home Use

Select OPTION.

SOUND & LANGUAGE CONTROL

Select Disability Assistance.

Select Audio Description.

Adjustment for Audio Description Volume With selecting On

Select Volume or Beep.

Make desired adjustment.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 8 more labels / short text on this page
OK Move · OK Move · Off · ► · ► · - + · Off · Close
Page 165 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 165 · click to enlarge
Page 165

I/II

STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)

When a programme is selected, the sound information for the station appears with the programme number and station name.

Select Audio or Audio Language.

Select the sound output.

Broadcast On Screen Display

Dual DUAL I, DUAL II, DUAL I+II

  • Mono sound selection

SOUND & LANGUAGE CONTROL

If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.

  • Language selection for dual language broadcast

If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.

DUAL I Sends the primary broadcast language to the loudspeakers. DUAL II Sends the secondary broadcast language to the loudspeakers. DUAL I+II Sends a separate language to each loudspeaker.

Mono MONO · Stereo STEREO

Page 166 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 166 · click to enlarge
Page 166

SOUND & LANGUAGE CONTROL

NICAM RECEPTION (IN ANALOGUE MODE ONLY)

If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.

Sound output can be selected according to the type of broadcast received.

1 When NICAM mono is received, you can select NICAM MONO or FM MONO.

2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO.

3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or FM MONO.

SPEAKER SOUND OUTPUT SELECTION

SOUND & LANGUAGE CONTROL

In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.

Select the sound output.

L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from

audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers.

Page 167 of the LG Electronics 32LD4 user manual — NOTE
Page 167 · click to enlarge
Page 167

ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION

The installation guide menu appears on the TV screen when it is switched on for the first time.

Select your desired language.

Select your country.

* If you want to change Language/ Country selection

Select OPTION.

Select OPTION.

Select Language(Language).

Select Country.

Select Menu Language.

Select your country.

Select your desired language.

Select Yes or No.

Save.

Save.

SOUND & LANGUAGE CONTROL

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.

NOTE

►If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On

Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. ►If you select the wrong local country, teletext may not appear correctly on the screen and some problems

may occur during teletext operation. ►The CI (Common Interface) function may not be applied based on country broadcasting circumstances.

►DTV mode control buttons may not function based on country broadcasting circumstances.

► In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on

digital broadcasting circumstances. ►The Country Setting "UK" should only be activated in UK.

►If the country setting is set to "--", European terrestrial digital standard broadcasting programmes are avail-

able, but some DTV functions may not work properly.

Page 168 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 168 · click to enlarge
Page 168

SOUND & LANGUAGE CONTROL

LANGUAGE SELECTION

The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.

Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.

When the languages you selected as the primary for Audio Language and Subtitle Language and Text Language are not supported, you can select language in secondary category.

In Digital mode, use the Text language function when two or more Text languages are broadcast. If tele- text data in a selected language is not broadcast, the default Text language page will be displayed.

Select OPTION.

Select OPTION.

Select Language(Language).

Select Disability Assistance.

Select Audio Language, Subtitle Language or Text Language(Except for UK). 4

Select Hard of Hearing( ).

Select your desired language.

Select On or Off.

Save.

SOUND & LANGUAGE CONTROL

  • Press the BACK button to move to the previous menu screen.
Page 169 of the LG Electronics 32LD4 user manual — SOUND & LANGUAGE CONTROL
Page 169 · click to enlarge
Page 169

Audio Language OSD Information

< Audio Language Selection >

N.A Not Available

►When two or more audio languages are broadcast, you can

select the audio language.

Audio for “Visual Impaired”

Audio for “Hearing Impaired”

Dolby Digital Plus Audio

Select Audio or Audio Language.

HE-AAC

Select an audio language.

< Subtitle Language Selection >

Subtitle Language OSD Information

►When two or more subtitle languages are broadcast, you

can select the subtitle language with the SUBTITLE button on the remote control.

N.A Not Available

► Press the button to select a subtitle language.

Subtitle for “Hard of Hearing”

- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service pro-

vider. - When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of

the Main audio.

SOUND & LANGUAGE CONTROL

Show 6 more labels / short text on this page
Display Status · MPEG Audio · Dolby Digital Audio · HE-AAC Audio · Display Status · Teletext Subtitle
Page 170 of the LG Electronics 32LD4 user manual — TIME SETTING
Page 170 · click to enlarge
Page 170

TIME SETTING

CLOCK SETUP

The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function.

The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

When if the city name in Time Zone is changed into offset, you can change time by 1 hour.

Time Zone menu can be changed in Auto mode.

TIME

TIME

  • Clock
  • Clock
  • Clock
  • Clock
  • Off Time : Off
  • Off Time : Off
  • On Time : Off
  • On Time : Off
  • Sleep Timer : Off
  • Sleep Timer : Off

Month Mar.

GMT

Time Zone Magadan, Kamchatka Vladivostok Yakutsk Irkutsk Krasnoyarsk Omsk Yekaterinburg Moscow, Samara Kaliningrad

Select TIME.

Select Clock.

TIME SETTING

Select Auto or Manual.

Select either the year, month, date, time or Time Zone option.

This Table means the Time Zone table of 9 area of Russia, and when the user selects the Time Zone for his or her area, it automatically sets the time for the corresponding area.

Set the year, month, date, time or Time Zone option.

However, even though the user selected his or her area, if the broadcasting station’s local time offset is not offered, or if the region infor- mation does not match, then the user may select the Offset from the Time Zone to set the correct time.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 11 more labels / short text on this page
OK Move · OK Move · ► · ◄ Auto ► · OK Move · Date 3 · Year 2008 · Hour 16 · Minute 09 · Time Zone London · Close
Page 171 of the LG Electronics 32LD4 user manual — TIME SETTING
Page 171 · click to enlarge
Page 171

AUTO ON/OFF TIME SETTING

The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed.(Except for 19/22/26/32LD350C-ZA, 32/37/42/47LD420C- ZA, 32/37/42/47/55LE531C-ZA)

The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.

TIME

TIME

  • Clock
  • Clock

1 Mar. 2007 16:09

  • Off Time : Off
  • Off Time : Off

Repeat ◄ Off ►

  • On Time : Off
  • On Time : Off
  • On Time : Off
  • On Time : Off
  • Sleep Timer : Off
  • Sleep Timer : Off
  • To cancel On/Off Time function, select Off .

Select TIME.

  • For On Time function only

Select Off Time or On Time.

Select Input.

TIME SETTING

Select Repeat.

Select the input source.

Select Off, Once, Daily, Mon. ~ Fri., Mon. ~ Sat., Sat. ~ Sun. or Sun.. 5

Set the programme.

Adjust volume level at switch-on.

Set the hour.

Set the minutes.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 10 more labels / short text on this page
OK Move · OK Move · ► · ► · Hour 00 · Minute 00 · Input Antenna · Programme TV1 · Volume 30 · Close
Page 172 of the LG Electronics 32LD4 user manual — TIME SETTING
Page 172 · click to enlarge
Page 172

TIME SETTING

SLEEP TIMER SETTING

You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.

Select Sleep Timer.

2 Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.

  • When you switch the TV off, the preset sleep timer is cancelled.
  • You can also adjust Sleep Timer in the TIME menu.

TIME SETTING

Page 173 of the LG Electronics 32LD4 user manual — PARENTAL CONTROL / RATINGS
Page 173 · click to enlarge
Page 173

PARENTAL CONTROL / RATINGS

SET PASSWORD & LOCK SYSTEM

Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ .

If a channel is locked, enter the password to unlock it temporarily.

LG Electronics 32LD4 — PARENTAL CONTROL / RATINGS diagram (page 173)
Fig. 229

LOCK

LOCK

  • Set Password
  • Set Password
  • Lock System : Off Off
  • Lock System : Off
  • Lock System : Off
  • Lock System : Off
  • Block Programme
  • Block Programme
  • Parental Guidance : Blocking Off
  • Parental Guidance : Blocking Off
  • Input Block
  • Input Block
  • Key Lock : Off
  • Key Lock : Off

Select LOCK.

  • If you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on the remote control handset.

Select Lock System.

PARENTAL CONTROL / RATINGS

Select On.

Set the password.

Input a 4-digit password. Be sure to remember this number! Re-enter new password for confirm.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 7 more labels / short text on this page
OK Move · OK Move · ► · ► · Off · ► · On
Page 174 of the LG Electronics 32LD4 user manual — PARENTAL CONTROL / RATINGS
Page 174 · click to enlarge
Page 174

PARENTAL CONTROL / RATINGS

BLOCK PROGRAMME

Blocks any programme that you do not want to watch or that you do not want your children to watch.

It is available to use this function in Lock System ”On”.

Enter a password to watch a blocked programme.

Page 1/1 Programme Edit Favourite Group : C

DTV RADIO TV

LOCK

2 Nine Digital HD

5 7 HD Digital

6 7 Digital 1

  • Set Password
  • Lock System : On
  • Block Programme
  • Block Programme
  • Parental Guidance : Blocking Off
  • Input Block
  • Key Lock : Off

Pr. Change

Page Change P Navigation Previous

Page 1/1 Programme Edit Favourite Group : C

Cable DTV Cable Radio Cable TV

2 Nine Digital HD

5 7 HD Digital

6 7 Digital 1

Pr. Change

Page Change P Navigation Previous

PARENTAL CONTROL / RATINGS

Select LOCK.

Select Lock System.

Enter the Block Progra mme.

Enter the Block Programme.

YELLOW Select a programme to be locked.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 18 more labels / short text on this page
OK Move · 1 Nine Digital · 3 Nine Guide · 4 7 Digital · 7 7 Digital2 · 8 7 Digital3 · 9 7 Guide · ▲ · ▼ · Block/Unblock · or · 1 Nine Digital · 3 Nine Guide · 4 7 Digital · 7 7 Digital2 · 8 7 Digital3 · 9 7 Guide · Block/Unblock
Page 175 of the LG Electronics 32LD4 user manual — PARENTAL CONTROL / RATINGS
Page 175 · click to enlarge
Page 175

PARENTAL CONTROL (IN DIGITAL MODE ONLY)

This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.

A password is required to gain access to this menu.

This set is programmed to remember which option it was last set to even if you switch the set off.

Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.

Enter a password to watch a blocked programme.

Rating differs by country.

LOCK

LOCK

Blocking OffPermits all programmes

Programmes for 18 and above will be blocked

  • Set Password
  • Set Password
  • Lock System : On
  • Lock System : On
  • Block Programme
  • Block Programme
  • Parental Guidance : Blocking Off
  • Parental Guidance : Blocking Off ▲
  • Parental Guidance : Blocking Off
  • Parental Guidance : Blocking Off ▲
  • Input Block
  • Input Block
  • Key Lock : Off
  • Key Lock : Off

(Except for France) (Only France)

Select LOCK.

Select Lock System.

PARENTAL CONTROL / RATINGS

Select Parental Guidance.

Make appropriate adjustments.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 22 more labels / short text on this page
OK Move · OK Move · ▲ · ▲ · 12 and above · 12 and above · 13 and above · 13 and above · ▼ · 14 and above · ▼ · 14 and above · 15 and above · 15 and above · 16 and above · 16 and above · 17 and above · 17 and above · 18 and above · 18 and above · 18 and above · Blocking Off
Page 176 of the LG Electronics 32LD4 user manual — PARENTAL CONTROL / RATINGS
Page 176 · click to enlarge
Page 176

PARENTAL CONTROL / RATINGS

EXTERNAL INPUT BLOCKING

Enables you to block an input.

It is available to use this function in Lock System ”On”.

  • Image shown may differ from your TV.

LOCK

LOCK

  • AV1
  • Set Password
  • Set Password
  • AV2
  • Lock System : On
  • Lock System : On
  • AV3
  • Block Programme
  • Block Programme
  • Component
  • Parental Guidance : Blocking Off
  • Parental Guidance : Blocking Off
  • RGB
  • Input Block
  • Input Block ▲
  • Input Block
  • Input Block
  • HDMI1
  • Key Lock : Off
  • Key Lock : Off
  • HDMI2
  • HDMI3
  • HDMI4

Select LOCK.

Select Lock System.

Select Input Block.

PARENTAL CONTROL / RATINGS

Select input source.

Select On or Off.

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 15 more labels / short text on this page
OK Move · OK Move · ◄ Off ► · Off · Off · Off · Off · ▼ · ▲ · Off · ▼ · Off · Off · Off · Close
Page 177 of the LG Electronics 32LD4 user manual — PARENTAL CONTROL / RATINGS
Page 177 · click to enlarge
Page 177

KEY LOCK

This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off.

LOCK

LOCK

  • Set Password
  • Set Password
  • Lock System : Off
  • Lock System : Off
  • Block Programme
  • Block Programme
  • Parental Guidance : Blocking Off
  • Parental Guidance : Blocking Off
  • Input Block
  • Input Block
  • Key Lock : Off
  • Key Lock : Off
  • Key Lock : Off
  • Key Lock : Off Off
  • In Key Lock ‘ On ’, if the TV is turned off, press the / I , INPUT, P ( or P ▲▼ ) button on the TV or POWER, INPUT, P or NUMBER buttons on the remote control then the set will be turned on.

Select LOCK.

Select Key Lock.

  • With the Key Lock On , the display ‘

Key Lock On ’ appears on the screen if any button on the front panel is pressed while viewing the TV.

Select On or Off.

  • When another OSD is displayed, ‘ Key Lock On ’ will not operate.

PARENTAL CONTROL / RATINGS

  • Press the MENU/EXIT button to return to normal TV viewing.
  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
OK Move · OK Move · ► · Off · On · ►
Page 178 of the LG Electronics 32LD4 user manual — TELETEXT
Page 178 · click to enlarge
Page 178

TELETEXT

This feature is not available in all countries.

  • Image shown

Teletext is a free service broadcast by most TV stations which gives up-to-the- minute information on news, weather, television programmes, share prices and many other topics.

may differ from your TV.

LG Electronics 32LD4 — TELETEXT diagram (page 178)
Fig. 230

The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

SWITCH ON/OFF

Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the sec- ond shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode reappears.

SIMPLE TEXT

  • Page selection

Enter the desired page number as a three digit number with the NUMBER buttons. If during selec- tion you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The P button can be used to select the preceding or following page.

TELETEXT

Page 179 of the LG Electronics 32LD4 user manual — TELETEXT
Page 179 · click to enlarge
Page 179

TOP TEXT

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.

  • Block / group / page selection

With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the P button can be used. The red button returns to the previous selection. Alternatively the P button can be used.

  • Direct page selection

As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.

  • Page selection

menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The P button can be used to select the preceding or following page. 4

Press the T.OPT button and then use button to select

TELETEXT

Page 180 of the LG Electronics 32LD4 user manual — TELETEXT
Page 180 · click to enlarge
Page 180

TELETEXT

SPECIAL TELETEXT FUNCTIONS

  • Press the T. OPT button and then use button to select the Text Option menu.

In UK(In digital mode), T. OPT button does not work.

  • Index Select the each index page.
  • Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, < > or NUMBER buttons.
  • Hold Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.
  • Reveal Select this menu to display concealed information, such as solutions to riddles or puzzles.
  • Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Select this menu again to view the updated teletext page.

TELETEXT

Show 7 more labels / short text on this page
Text Option · Index · Time · Hold · Reveal · Update · Close
Page 181 of the LG Electronics 32LD4 user manual — DIGITAL TELETEXT
Page 181 · click to enlarge
Page 181

DIGITAL TELETEXT

*This function works in UK, Ireland only.

The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.

TELETEXT WITHIN DIGITAL SERVICE

LG Electronics 32LD4 — TELETEXT WITHIN DIGITAL SERVICE diagram (page 181)
Fig. 231

1 Press the numeric or P button to select a digital service which broadcasts digital teletext.

2 Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, , RED, GREEN, YELLOW, BLUE or NUMBER buttons and etc..

3 To change digital teletext service, select a dif- ferent service by the numeric or P button.

TELETEXT IN DIGITAL SERVICE

1 Press the numeric or P button to select a certain service which broadcasts digital teletext.

LG Electronics 32LD4 — TELETEXT IN DIGITAL SERVICE diagram (page 181)
Fig. 232

2 Press the TEXT or coloured button to switch on teletext.

3 Follow the indications on digital teletext and move onto the next step by pressing OK, , RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.

DIGITAL TELETEXT

4 Press the TEXT or colour button to switch off digital teletext and return to TV viewing.

Some services may allow you to access text ser- vices by pressing the RED button.

Page 182 of the LG Electronics 32LD4 user manual — HDMI
Page 182 · click to enlarge
Page 182

APPENDIX

TROUBLESHOOTING

The TV does not operate properly.

  • Check to see if there is any object between the TV and the remote con-

trol causing an obstruction. Ensure you are pointing the remote control directly at the TV.

  • Ensure that the batteries are installed with correct polarity (+ to +, - to -).
  • Install new batteries.
  • Is the sleep timer set?
  • Check the power control settings. Has the Power supply been interrupted.
  • If the TV is switched on and there is no input signal, it will switch off auto-

matically after 15 minutes.(Except for 19/22/26/32LD350C-ZA, 32/37/42/47LD420C-ZA, 32/37/42/47/55LE531C-ZA)

The video function does not work.

  • Check whether the TV is switched on.
  • Try another channel. The problem may be with the broadcast.

No picture & No sound

  • Is the power cord inserted correctly into the mains?
  • Check your antenna direction and/or location.
  • Test the mains outlet by plugging another TV into the same outlet. Picture appears slowly
  • This is normal, the image is muted during the TV startup process. Please contact

your service centre, if the picture has not appeared after five minutes.

  • Adjust Colour in menu option.
  • Allow a sufficient distance between the TV and the VCR.

No or poor colour

  • Try another channel. The problem may be with the broadcast.
  • Are the video cables installed properly?
  • Activate any function to restore the brightness of the picture. Horizontal/vertical bars
  • Check for local interference such as an electrical appliance or power tool.
  • Station or cable channel experiencing problems, tune to another station.
  • Station signal is weak, reposition the antenna to receive weaker stations.
  • Check for sources of possible interference. Lines or streaks
  • Check antenna (Change the position of the antenna).

APPENDIX

  • Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are

not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.

HDMI

Show 12 more labels / short text on this page
The remote control · does not work · Power is suddenly · turned off · after switching on · or poor picture · or picture shaking · Poor reception on · some channels · in pictures · No picture · when connecting
Page 183 of the LG Electronics 32LD4 user manual — APPENDIX
Page 183 · click to enlarge
Page 183

The audio function does not work.

  • Press the + or - button.
  • Sound muted? Press MUTE button.

Picture OK & No

  • Try another channel. The problem may be with the broadcast.
  • Are the audio cables installed properly? No output from one

of the speakers ■Adjust Balance in menu option.

  • A change in ambient humidity or temperature may result in an unusual noise

when the TV is switched on or off and does not indicate a fault with the TV.

  • Check HDMI cable is High Speed HDMI Cable.

No sound when con- necting HDMI or USB

  • Check USB cable over version 2.0.

*This feature is not available for all models.

There is a problem in PC mode. (Only PC mode applied)

The signal is out of

  • Adjust resolution, horizontal frequency, or vertical frequency.
  • Check the input source.

Vertical bar or stripe on

background & Horizontal Noise &

  • Use Auto configure or adjust clock, phase, or H/V position. (Option)

Screen colour is unstable or single

  • Check the signal cable.
  • Reinstall the PC video card.

There is a problem with PICTURE settings.

When the user chang- es the picture settings,

  • It means that the TV is currently set to Store Demo mode.

the TV automatically converts back to the initial settings after a certain period of time.

To switch to Home use mode you should do the followings: From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose Home use. Now, you have completed switching to the Home use mode.

APPENDIX

Show 6 more labels / short text on this page
sound · Unusual sound from · inside the TV · range (Invalid format) · Incorrect position · colour
Page 184 of the LG Electronics 32LD4 user manual — APPENDIX
Page 184 · click to enlarge
Page 184

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke- warm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.

Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

  • To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
  • Do not to use a wet cloth.

Extended Absence

CAUTION

►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to

protect against possible damage from lightning or power surges.

APPENDIX

Page 185 of the LG Electronics 32LD4 user manual — APPENDIX
Page 185 · click to enlarge
Page 185

PRODUCT SPECIFICATIONS

19LD35** / 19LD34** 22LD35** / 22LD34**

19LD350-ZA / 19LD350N-ZA 19LD358-ZA / 19LD359-ZB 19LD350C-ZA / 19LD351-ZB 19LD351N-ZB 19LD340-ZA / 19LD341-ZB 19LD340N-ZA / 19LD341N-ZB 19LD348-ZA / 19LD355-ZA 19LD356-ZB / 19LD345-ZA

22LD350-ZA / 22LD350N-ZA 22LD358-ZA / 22LD359-ZB 22LD350C-ZA / 22LD351-ZB 22LD351N-ZB 22LD340-ZA / 22LD341-ZB 22LD340N-ZA / 22LD341N-ZB 22LD348-ZA / 22LD355-ZA 22LD356-ZB / 22LD345-ZA

MODELS

19LD346-ZB

22LD346-ZB

with stand 457.0 mm x 336.0 mm x 164.9 mm 526.0 mm x 377.0 mm x 164.9 mm

(Width x Height x Depth)

without stand 457.0 mm x 290.0 mm x 65.0 mm 526.0 mm x 331.0 mm x 65.0 mm

3.4 kg 3.1 kg 4.3 kg 4.0 kg

AC 100-240 V~ 50 / 60 Hz

30 W AC 100-240 V~ 50 / 60 Hz

50 W

26LD35** / 26LD34** 32LD35** / 32LD34**

26LD350-ZA / 26LD350N-ZA 26LD358-ZA / 26LD359-ZB 26LD350C-ZA /26LD351-ZB 26LD351N-ZB 26LD340-ZA / 26LD341-ZB 26LD340N-ZA / 26LD341N-ZB 26LD348-ZA / 26LD355-ZA 26LD356-ZB / 26LD345-ZA

32LD350-ZA / 32LD350N-ZA 32LD358-ZA / 32LD359-ZB 32LD350C-ZA 32LD351-ZB / 32LD351N-ZB

MODELS

32LD340-ZA / 32LD341-ZB 32LD340N-ZA / 32LD341N-ZB 32LD348-ZA / 32LD355-ZA 32LD356-ZB / 32LD345-ZA

26LD346-ZB

32LD346-ZB

with stand 663.0 mm x 484.0 mm x 206.8 mm 800.0 mm x 565.0 mm x 206.8 mm

(Width x Height x Depth)

without stand 663.0 mm x 423.0 mm x 79.9 mm 800.0 mm x 509.0 mm x 73.8 mm

7.3 kg 6.2 kg 9.2 kg 8.2 kg

AC 100-240 V~ 50 / 60 Hz

100 W AC 100-240 V~ 50 / 60 Hz

120 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

APPENDIX

  • The specifications shown above may be changed without prior notice for quality improvement.
Show 17 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 186 of the LG Electronics 32LD4 user manual — APPENDIX
Page 186 · click to enlarge
Page 186

APPENDIX

32LD4***

MODELS

32LD450-ZA / 32LD450N-ZA 32LD458-ZA / 32LD450C-ZA 32LD465-ZA / 32LD465N-ZA 32LD468-ZA / 32LD455-ZA

32LD420-ZA / 32LD420N-ZA 32LD428-ZA / 32LD420C-ZA 32LD425-ZA

32LD421-ZB / 32LD421N-ZB 32LD426-ZB

with stand 805.0 mm x 583.0 mm x 224.0 mm 805.0 mm x 586.0 mm x 211.0 mm 799.0 mm x 555.0 mm x 207.0 mm

(Width x Height x Depth)

without stand 805.0 mm x 531.0 mm x 79.9 mm 805.0 mm x 531.0 mm x 79.9 mm 799.0 mm x 506.0 mm x 73.5 mm

10.8 kg

10.8 kg

9.1 kg

9.7 kg

9.7 kg

8.1 kg

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

140 W

140 W

120 W

37LD4***

37LD450-ZA / 37LD450N-ZA 37LD458-ZA / 37LD450C-ZA 37LD465-ZA 37LD465N-ZA 37LD468-ZA / 37LD455-ZA

MODELS

37LD420-ZA / 37LD420N-ZA 37LD428-ZA / 37LD420C-ZA 37LD425-ZA

37LD421-ZB / 37LD421N-ZB 37LD426-ZB

with stand 922.0 mm x 659.0 mm x 297.0 mm 922.0 mm x 660.0 mm x 270.6 mm 916.0 mm x 625.0 mm x 261.0 mm

(Width x Height x Depth)

without stand 922.0 mm x 595.0 mm x 88.0 mm 922.0 mm x 595.0 mm x 88.0 mm 916.0 mm x 575.0 mm x 77.4 mm

14.0 kg

14.0 kg

12.5 kg

12.2 kg

12.2 kg

10.8 kg

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

150 W

150 W

160 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Show 17 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 187 of the LG Electronics 32LD4 user manual — APPENDIX
Page 187 · click to enlarge
Page 187

42LD4***

MODELS

42LD450-ZA / 42LD450N-ZA 42LD458-ZA / 42LD450C-ZA 42LD465-ZA / 42LD465N-ZA 42LD468-ZA / 42LD455-ZA

42LD420-ZA / 42LD420N-ZA 42LD428-ZA / 42LD420C-ZA 42LD425-ZA

42LD421-ZB / 42LD421N-ZB 42LD426-ZB

with stand 1028.0 mm x 715.4 mm x 297.0 mm 1028.0 mm x 716.4 mm x 270.6 mm 1023.0 mm x 685.0 mm x 261.0 mm

(Width x Height x Depth)

without stand 1028.0 mm x 658.6 mm x 88.7 mm 1028.0 mm x 658.6 mm x 88.7 mm 1023.0 mm x 635.0 mm x 76.6 mm

17.3 kg

17.3 kg

15.1 kg

15.5 kg

15.5 kg

13.5 kg

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

190 W

190 W

190 W

47LD4***

MODELS

47LD450-ZA / 47LD450N-ZA 47LD458-ZA / 47LD450C-ZA 47LD465-ZA / 47LD465N-ZA 47LD468-ZA / 47LD455-ZA

47LD420-ZA / 47LD420N-ZA 47LD428-ZA / 47LD420C-ZA 47LD425-ZA

47LD421-ZB / 47LD421N-ZB 47LD426-ZB

with stand 1140.6 mm x 784.8 mm x 337.4 mm 1140.6 mm x 788.3 mm x 318.9 mm 1136.0 mm x 757.0 mm x 270.0 mm

(Width x Height x Depth)

without stand 1140.6 mm x 722.9 mm x 99.0 mm 1140.6 mm x 722.9 mm x 99.0 mm 1136.0 mm x 698.0 mm x 76.5 mm

21.6 kg

21.6 kg

19.5 kg

19.0 kg

19.0 kg

17.5 kg

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

AC 100-240 V~ 50 / 60 Hz

260 W

260 W

260 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Show 17 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 188 of the LG Electronics 32LD4 user manual — APPENDIX
Page 188 · click to enlarge
Page 188

APPENDIX

LG Electronics 32LD4 — APPENDIX diagram (page 188)
Fig. 233

32LD550-ZC / 32LD550N-ZC 32LD558-ZC / 32LD559-ZA 32LD565-ZC / 32LD565N-ZC

32LD551-ZA / 32LD551N-ZA 32LD566-ZA / 32LD568-ZC 32LD569-ZA / 32LD555-ZC

with stand 800.0 mm x 563.0 mm x 207.0 mm 800.0 mm x 563.0 mm x 207.0 mm

without stand 800.0 mm x 503.0 mm x 74.7 mm 800.0 mm x 503.0 mm x 74.7 mm

150 W AC 100-240 V~ 50 / 60 Hz

42LD550-ZC / 42LD550N-ZC 42LD558-ZC / 42LD559-ZA 42LD565-ZC / 42LD565N-ZC

42LD551-ZA / 42LD551N-ZA 42LD566-ZA / 42LD568-ZC 42LD569-ZA / 42LD555-ZC

with stand 1024.0 mm x 695.0 mm x 261.0 mm 1024.0 mm x 695.0 mm x 261.0 mm

without stand 1024.0 mm x 632.0 mm x 78.7 mm 1024.0 mm x 632.0 mm x 78.7 mm

210 W AC 100-240 V~ 50 / 60 Hz

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Page 189 of the LG Electronics 32LD4 user manual — APPENDIX
Page 189 · click to enlarge
Page 189
LG Electronics 32LD4 — Product Specifications diagram (page 189)
Fig. 234 · Product Specifications

with stand 1115.0 mm x 752.0 mm x 270.0 mm 1115.0 mm x 752.0 mm x 270.0 mm

without stand 1115.0 mm x 680.0 mm x 77.0 mm 1115.0 mm x 680.0 mm x 77.0 mm

240 W AC 100-240 V~ 50 / 60 Hz

52LD550-ZC / 52LD550N-ZC 52LD558-ZC / 52LD559-ZA 52LD565-ZC / 52LD565N-ZC

with stand 1266.0 mm x 851.0 mm x 330.0 mm 1266.0 mm x 851.0 mm x 330.0 mm

without stand 1266.0 mm x 775.0 mm x 96.4 mm 1266.0 mm x 775.0 mm x 96.4 mm

300 W AC 100-240 V~ 50 / 60 Hz

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Page 190 of the LG Electronics 32LD4 user manual — APPENDIX
Page 190 · click to enlarge
Page 190

APPENDIX

LG Electronics 32LD4 — APPENDIX diagram (page 190)
Fig. 235

60LD550-ZC / 60LD550N-ZC 60LD558-ZC / 60LD559-ZA 60LD565-ZC / 60LD565N-ZC

60LD551-ZA / 60LD551N-ZA 60LD566-ZA / 60LD568-ZC 60LD569-ZA / 60LD555-ZC

with stand 1441.0 mm x 963.0 mm x 345.0 mm 1441.0 mm x 963.0 mm x 345.0 mm

without stand 1441.0 mm x 877.0 mm x 109.0 mm 1441.0 mm x 877.0 mm x 109.0 mm

380 W AC 100-240 V~ 50 / 60 Hz

with stand 667.0 mm x 504.0 mm x 224.0 mm 805.0 mm x 583.0 mm x 224.0 mm

without stand 667.0 mm x 446.2 mm x 80.0 mm 805.0 mm x 528.0 mm x 79.9 mm

100 W AC 100-240 V~ 50 / 60 Hz

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Page 191 of the LG Electronics 32LD4 user manual — APPENDIX
Page 191 · click to enlarge
Page 191
LG Electronics 32LD4 — Product Specifications diagram (page 191)
Fig. 236 · Product Specifications

with stand 786.0 mm x 559.0 mm x 221.0 mm 907.0 mm x 630.0 mm x 270.0 mm

without stand 786.0 mm x 500.0 mm x 39.9 mm 907.0 mm x 565.0 mm x 39.9 mm

130 W AC 100-240 V~ 50 / 60 Hz

with stand 1018.0 mm x 692.0 mm x 270.0 mm

without stand 1018.0 mm x 627.0 mm x 29.8 mm

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

Supported movie files Refer to p. 54 to 55

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Page 192 of the LG Electronics 32LD4 user manual — APPENDIX
Page 192 · click to enlarge
Page 192

APPENDIX

19LE3***

MODELS

19LE3300-ZA / 19LE330N-ZA 19LE3308-ZA / 19LE3400-ZA 19LE340N-ZA / 19LE3408-ZA 19LE3310-ZB / 19LE331N-ZB 19LE3410-ZB / 19LE341N-ZB

with stand 471.2 mm x 365.9 mm x 155.4 mm 471.2 mm x 365.9 mm x 155.4 mm

(Width x Height x Depth)

without stand 471.2 mm x 315.5 mm x 34.4 mm 471.2 mm x 315.5 mm x 34.4 mm

3.4 kg 3.2 kg 3.4 kg 3.2 kg

Power requirement 19LE3*** : DC 24 V, 1.6 A, 38 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz

22LE3***

MODELS

22LE3300-ZA / 22LE330N-ZA 22LE3308-ZA / 22LE3400-ZA 22LE340N-ZA / 22LE3408-ZA 22LE3310-ZB / 22LE331N-ZB 22LE3410-ZB / 22LE341N-ZB

with stand 542.9 mm x 407.1 mm x 155.4 mm 542.9 mm x 407.1 mm x 155.4 mm

(Width x Height x Depth)

without stand 542.9 mm x 357.6 mm x 34.4 mm 542.9 mm x 357.6 mm x 34.4 mm

4.2 kg 3.9 kg 4.2 kg 3.9 kg

22LE3*** : DC 24 V, 1.7 A, 40 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz

22LE5***

MODELS

22LE5500-ZA / 22LE550N-ZA 22LE5508-ZA 22LE5510-ZB / 22LE551N-ZB 22LE5518-ZB

with stand 542.9 mm x 407.1 mm x 155.4 mm 542.9 mm x 407.1 mm x 155.4 mm

(Width x Height x Depth)

without stand 542.9 mm x 357.6 mm x 34.4 mm 542.9 mm x 357.6 mm x 34.4 mm

4.2 kg 3.9 kg 4.2 kg 3.9 kg

22LE5*** : DC 24 V, 1.7 A, 40 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

APPENDIX

Less than 85 %

Supported movie files Refer to p. 54 to 55

  • The specifications shown above may be changed without prior notice for quality improvement.
Show 18 more labels / short text on this page
Dimensions · Weight with stand · without stand · Dimensions · Weight with stand · without stand · Power requirement · Dimensions · Weight with stand · without stand · Power requirement · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 193 of the LG Electronics 32LD4 user manual — APPENDIX
Page 193 · click to enlarge
Page 193

26LE3***

MODELS

26LE3300-ZA / 26LE330N-ZA 26LE3308-ZA 26LE3310-ZB / 26LE331N-ZB

with stand 652.0 mm x 480.8 mm x 191.4 mm 652.0 mm x 480.8 mm x 191.4 mm

(Width x Height x Depth)

without stand 652.0 mm x 420.3 mm x 34.4 mm 652.0 mm x 420.3 mm x 34.4 mm

6.1 kg 5.1 kg 6.1 kg 5.1 kg

26LE3*** : DC 24 V, 1.8 A, 48 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz

26LE5***

MODELS

26LE5500-ZA / 26LE550N-ZA 26LE5508-ZA 26LE5510-ZB / 26LE551N-ZB 26LE5518-ZB

with stand 652.0 mm x 480.8 mm x 191.4 mm 652.0 mm x 480.8 mm x 191.4 mm

(Width x Height x Depth)

without stand 652.0 mm x 420.3 mm x 34.4 mm 652.0 mm x 420.3 mm x 34.4 mm

6.1 kg 5.1 kg 6.1 kg 5.1 kg

26LE5*** : DC 24 V, 2.1 A, 55 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz

32LE3*** 32LE5***

32LE5300-ZA / 32LE530N-ZA 32LE5308-ZA 32LE5310-ZB / 32LE531N-ZB 32LE5318-ZB / 32LE530C-ZA 32LE531C-ZA

MODELS

32LE3300-ZA / 32LE330N-ZA 32LE3308-ZA

with stand 771.8 mm x 552.3 mm x 221.0 mm 784.6 mm x 558.1 mm x 221.0 mm

(Width x Height x Depth)

without stand 771.8 mm x 489.3 mm x 39.9 mm 784.6 mm x 499.5 mm x 39.9 mm

11.8 kg 10.0 kg 12.65 kg 10.5 kg

AC 100-240 V~ 50 / 60 Hz

90 W AC 100-240 V~ 50 / 60 Hz

130 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

APPENDIX

-20 °C to 60 °C

Less than 85 %

Supported movie files Refer to p. 54 to 55

  • The specifications shown above may be changed without prior notice for quality improvement.
Show 20 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Dimensions · Weight with stand · without stand · Power requirement · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 194 of the LG Electronics 32LD4 user manual — APPENDIX
Page 194 · click to enlarge
Page 194

APPENDIX

37LE5***

MODELS

37LE5300-ZA / 37LE530N-ZA 37LE5308-ZA / 37LE530C-ZA 37LE5310-ZB / 37LE531N-ZB 37LE5318-ZB / 37LE531C-ZA

with stand 905.0 mm x 630.0 mm x 270.0 mm 905.0 mm x 630.0 mm x 270.0 mm

(Width x Height x Depth)

without stand 905.0 mm x 568.0 mm x 39.9 mm 905.0 mm x 568.0 mm x 39.9 mm

15.3 kg 12.8 kg 15.3 kg 12.8 kg

AC 100-240 V~ 50 / 60 Hz

140 W AC 100-240 V~ 50 / 60 Hz

140 W

42LE5***

MODELS

42LE5300-ZA / 42LE530N-ZA 42LE5308-ZA / 42LE530C-ZA 42LE5310-ZB / 42LE531N-ZB 42LE5318-ZB / 42LE531C-ZA

with stand 1016.0 mm x 692.0 mm x 270.0 mm 1016.0 mm x 692.0 mm x 270.0 mm

(Width x Height x Depth)

without stand 1016.0 mm x 630.0 mm x 29.3 mm 1016.0 mm x 630.0 mm x 29.3 mm

19.2 kg 16.7 kg 19.2 kg 16.7 kg

AC 100-240 V~ 50 / 60 Hz

150 W AC 100-240 V~ 50 / 60 Hz

150 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

Supported movie files Refer to p. 54 to 55

  • The specifications shown above may be changed without prior notice for quality improvement.

APPENDIX

Show 17 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 195 of the LG Electronics 32LD4 user manual — APPENDIX
Page 195 · click to enlarge
Page 195

47LE5***

MODELS

47LE5300-ZA / 47LE530N-ZA 47LE5308-ZA / 47LE530C-ZA 47LE5310-ZB / 47LE531N-ZB 47LE5318-ZB / 47LE531C-ZA

with stand 1126.6 mm x 757.9 mm x 284.4 mm 1126.6 mm x 757.9 mm x 284.4 mm

(Width x Height x Depth)

without stand 1126.6 mm x 692.0 mm x 29.3 mm 1126.6 mm x 692.0 mm x 29.3 mm

22.9 kg 19.6 kg 22.9 kg 19.6 kg

AC 100-240 V~ 50 / 60 Hz

170 W AC 100-240 V~ 50 / 60 Hz

170 W

55LE5***

MODELS

55LE5300-ZA / 55LE530N-ZA 55LE5308-ZA / 55LE530C-ZA 55LE5310-ZB / 55LE531N-ZB 55LE5318-ZB / 55LE531C-ZA

with stand 1306.0 mm x 867.0 mm x 328.0 mm 1306.0 mm x 867.0 mm x 328.0 mm

(Width x Height x Depth)

without stand 1306.0 mm x 797.0 mm x 30.7 mm 1306.0 mm x 797.0 mm x 30.7 mm

34.05 kg 29.35 kg 34.05 kg 29.35 kg

AC 100-240 V~ 50 / 60 Hz

200 W AC 100-240 V~ 50 / 60 Hz

200 W

(Width x Height x Depth) 100.0 mm x 55.0 mm x 5.0 mm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

Supported movie files Refer to p. 54 to 55

  • The specifications shown above may be changed without prior notice for quality improvement.
LG Electronics 32LD4 — 200 W diagram (page 195)
Fig. 237

APPENDIX

  • The specifications shown above may be changed without prior notice for quality improvement.
Show 17 more labels / short text on this page
Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · Dimensions · Weight with stand · without stand · Power requirement · Power Consumption · CI Module Size · Operating · Temperature · Environment condition · Operating Humidity · Storage Temperature · Storage Humidity
Page 196 of the LG Electronics 32LD4 user manual — APPENDIX
Page 196 · click to enlarge
Page 196

APPENDIX

IR CODES

*This feature is not available for all models.

LG Electronics 32LD4 — APPENDIX diagram (page 196)
Fig. 238

10 to 19 Number Key 0 to 9 R/C BUTTON

Page 197 of the LG Electronics 32LD4 user manual — APPENDIX
Page 197 · click to enlarge
Page 197

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

LG Electronics 32LD4 — RS-232C Setup diagram (page 197)
Fig. 239 · RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.

Type of Connector; D-Sub 9-Pin Male

No. Pin Name

1 2 3 4 5 6 7 8 9

No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

LG Electronics 32LD4 — Type of Connector; D-Sub 9-Pin Male diagram (page 197)
Fig. 240 · Type of Connector; D-Sub 9-Pin Male

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)

PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9

PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9

APPENDIX

3-Wire Configurations(Not standard)

Page 198 of the LG Electronics 32LD4 user manual — APPENDIX
Page 198 · click to enlarge
Page 198

APPENDIX

Set ID

Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.154

  • Language(Language)
  • Language(Language)
  • Country : UK
  • Country : UK
  • Disability Assistance
  • Disability Assistance
  • Power Indicator
  • Power Indicator
  • Factory Reset
  • Factory Reset
  • Set ID : 1
  • Set ID :1
  • Set ID : 1
  • Set ID :1
  • Mode Setting : Home Use
  • Mode Setting : Home Use

Select OPTION.

Select Set ID.

Adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1 to 99.

APPENDIX

  • Press the BACK button to move to the previous menu screen.
Show 6 more labels / short text on this page
OK Move OPTION · OK Move OPTION · ◄ 1 ► · ► · ► · Close
Page 199 of the LG Electronics 32LD4 user manual — APPENDIX
Page 199 · click to enlarge
Page 199

Communication Parameters

  • Baud rate : 9600 bps (UART)
  • Use a crossed (reverse) cable.
  • Data length : 8 bits
  • Parity : None
  • Stop bit : 1 bit
  • Communication code : ASCII code

Transmission / Receiving Protocol

[Command1][Command2][ ][Set ID][ ][Data][Cr]

* [Command 1] : First command to control the TV. (j, k, m or x) * [Command 2] : Second command to control the TV. * [Set ID] : You can adjust the set ID to choose

COMMAND

1 COMMAND

1. Power k a 00 to 01

desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every con-

2. Aspect Ratio k c Refer to p. 152
3. Screen Mute k d Refer to p. 152
4. Volume Mute k e 00 to 01

nected set is controlled. Set ID is indicated as decimal (1 to 99)

5. Volume Control k f 00 to 64

on menu and as Hexa decimal (0x0 to 0x63) on transmission/receiving proto- col. * [DATA] : To transmit command data. Transmit ‘FF’ data to read status of com-

6. Contrast k g 00 to 64
7. Brightness k h 00 to 64
8. Colour k i 00 to 64
9. Tint k j 00 to 64
mand. * [Cr]Carriage Return ASCII code ‘0x0D’ * [ ] : ASCII code ‘space (0x20)’
10. Sharpness k k 00 to 64
11. OSD Select k l 00 to 01
12. Remote control lock mode k m 00 to 01
13. Treble k r 00 to 64
14. Bass k s 00 to 64
15. Balance k t 00 to 64

[Command2][ ][Set ID][ ][OK][Data][x]

16. Colour Temperature x u 00 to 64

* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

17. Energy Saving j q 00 to 05
18. Auto Configuration j u 01
19. Tune Command m a Refer to p. 154
20. Programme Add/Skip m b 00 to 1
21. Key m c Key Code
22. Control Back Light m g 00 to 64

[Command2][ ][Set ID][ ][NG][Data][x]

23. Input select (Main) x b Refer to p. 155

* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

APPENDIX

* Note : During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are not exe- cuted and treated as NG.

Data 00Illegal Code
Show 5 more labels / short text on this page
Transmission · Command Reference List · 2 DATA (Hexadecimal) · OK Acknowledgement · Error Acknowledgement
Page 200 of the LG Electronics 32LD4 user manual — APPENDIX
Page 200 · click to enlarge
Page 200

APPENDIX

1. Power (Command: k a)
4. Volume Mute (Command: k e)

►To control Power On/Off of the set. Transmission

►To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.

[k][a][ ][Set ID][ ][Data][Cr]

Data 00Power Off 01 : Power On

[k][e][ ][Set ID][ ][Data][Cr]

Data 00Volume mute on (Volume off) 01 : Volume mute off (Volume on)

[a][ ][Set ID][ ][OK/NG][Data][x]

►To show Power On/Off. Transmission

[e][ ][Set ID][ ][OK/NG][Data][x]

[k][a][ ][Set ID][ ][FF][Cr]

5. Volume Control (Command: k f)

►To adjust volume. You can also adjust volume with the VOLUME but- tons on remote control. Transmission

[a][ ][Set ID][ ][OK/NG][Data][x]

* Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. * OK Ack., Error Ack. and other message may dis- play on the screen when TV is power On.

[k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

2. Aspect Ratio ( Command: k c) (Main Picture Size)

[f][ ][Set ID][ ][OK/NG][Data][x]

►To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

6. Contrast (Command: k g) ►To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission

[k][c][ ][Set ID][ ][Data][Cr]

Data 01Normal screen (4:3) 02 : Wide screen (16:9) 04 : Zoom 06 : Original
7. 14:9 09 : Just Scan 0B : Full Wide 10 to 1F : Cinema Zoom 1 to 16

[k][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[g][ ][Set ID][ ][OK/NG][Data][x]

[c][ ][Set ID][ ][OK/NG][Data][x]

7. Brightness (Command: k h) ►To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission

* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available. * Full Wide is supported only for Digital, Analogue, AV.

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

3. Screen Mute (Command: k d)

[h][ ][Set ID][ ][OK/NG][Data][x]

►To select screen mute on/off. Transmission

8. Colour (Command: k i) ►To adjust the screen colour. You can also adjust colour in the PICTURE menu. Transmission

[k][d][ ][Set ID][ ][Data][Cr]

APPENDIX

Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[d][ ][Set ID][ ][OK/NG][Data][x]

[i][ ][Set ID][ ][OK/NG][Data][x]

* In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

Show 11 more labels / short text on this page
Transmission · Ack · Ack · Ack · Ack · Transmission · Ack · Ack · Ack · Ack · Ack
Page 201 of the LG Electronics 32LD4 user manual — APPENDIX
Page 201 · click to enlarge
Page 201
9. Tint (Command: k j) ►To adjust the screen tint. You can also adjust tint in the PICTURE menu.
13. Treble (Command: k r)

►To adjust treble. You can also adjust treble in the AUDIO menu. Transmission

[k][j][ ][Set ID][ ][Data][Cr]

[k][r][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 154.

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[j][ ][Set ID][ ][OK/NG][Data][x]

[r][ ][Set ID][ ][OK/NG][Data][x]

14. Bass (Command: k s)
10. Sharpness (Command: k k)

►To adjust bass. You can also adjust bass in the AUDIO menu. Transmission

►To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission

[k][s][ ][Set ID][ ][Data][Cr]

[k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[k][ ][Set ID][ ][OK/NG][Data][x]

[s][ ][Set ID][ ][OK/NG][Data][x]

15. Balance (Command: k t)

►To adjust balance. You can also adjust balance in the AUDIO menu. Transmission

11. OSD Select (Command: k l) ►To select OSD (On Screen Display) on/off when con-

trolling remotely.

[k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[k][l][ ][Set ID][ ][Data][Cr]

Ack Data 00OSD off 01 : OSD on

[t][ ][Set ID][ ][OK/NG][Data][x]

[l][ ][Set ID][ ][OK/NG][Data][x]

16. Colour Temperature (Command: x u)

►To adjust colour temperature. You can also adjust Colour

12. Remote control lock mode (Command: k m)

Temperature in the PICTURE menu. Transmission

►To lock the front panel controls on the monitor and

remote control. Transmission

[x][u][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.

[k][m][ ][Set ID][ ][Data][Cr]

Ack Data 00Lock off 01 : Lock on

APPENDIX

[m][ ][Set ID][ ][OK/NG][Data][x]

[u][ ][Set ID][ ][OK/NG][Data][x]

* If you are not using the remote control, use this mode. When main power is on/off, external control lock is

released. * In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key.

Show 8 more labels / short text on this page
Transmission · Ack · Ack · Ack · Ack · Transmission · Ack · Ack
Page 202 of the LG Electronics 32LD4 user manual — APPENDIX
Page 202 · click to enlarge
Page 202

APPENDIX

17. Energy Saving (Command: j q)
19.Tune Command (Commandm a)

►To reduce the power consumption of the TV. You can

►Select channel to following physical number. Transmission

also adjust Energy Saving in PICTURE menu. Transmission

LG Electronics 32LD4 — APPENDIX diagram (page 202)
Fig. 241

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]

Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Don’t care Data02 : 0x00 : Analogue Main 0x10 : DTV Main 0x20 : Radio Channel data range Analogue - Min: 00 to Max: 63 (0 to 99) Digital - Min: 00 to Max: 3E7 (0 to 999) (Except For Sweden, Finland, Norway, Denmark, Ireland) Digital - Min: 00 to Max: 270F (0 to 9999) (Only Sweden, Finland, Norway, Denmark, Ireland)

Description 7 6 5 4 3 2 1 0

0 Low Power 0 Off

0 Low Power 0 0 0 1 Minimum

0 Low Power 0 0 1 0 Medium

0 Low Power 0 0 1 1 Maximum

0 Low Power 0 1 0 0 Auto

0 Low Power 0 1 0 1 Screen Off

(Only 32/42/46/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***)

[a][ ][Set ID][ ][OK/NG][Data][x]

Data Min00 to Max: 7DH

[q][ ][Set ID][ ][OK/NG][Data][x]

20. Programme Add/Skip(Command: m b)
18. Auto Configure(Command: j u)

►To set skip status for the current Programme. Transmission

►To adjust picture position and minimize image shaking

automatically. It works only in RGB (PC) mode. Transmission

[m][b][ ][Set ID][ ][Data][Cr]

Data 00Skip 01 : Add

[j][u][ ][Set ID][ ][Data][Cr]

Data 01To set
LG Electronics 32LD4 — APPENDIX diagram (page 202)
Fig. 242

[u][ ][Set ID][ ][OK/NG][Data][x]

* Real data mapping 1 00 : Step 0

FStep 15 (Set ID 15) 10 : Step 16 (Set ID 16)

APPENDIX

Show 4 more labels / short text on this page
Ack · Ack · Ack · Ack
Page 203 of the LG Electronics 32LD4 user manual — APPENDIX
Page 203 · click to enlarge
Page 203
21. Key(Command: m c)
23. Input select ( Command: x b) (Main Picture Input)

►To send IR remote key code. Transmission

►To select input source for main picture. Transmission

[m][c][ ][Set ID][ ][Data][Cr]

[x][b][ ][Set ID][ ][Data][Cr]

Data Key code - Refer to page 148.

[c][ ][Set ID][ ][OK/NG][Data][x]

MSB LSB

LG Electronics 32LD4 — MSB LSB diagram (page 203)
Fig. 243
22. Control Back Light (Command: m g)

►To Control the back light. Transmission

[m][g][ ][Set ID][ ][Data][Cr]

Datadata Min: 00 to Max: 64

[g][ ][Set ID][ ][OK/NG][Data][x]

0 Input1

0 0 0 1 Input2

0 0 1 0 Input3

0 0 1 1 Input4

[b][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX

Show 5 more labels / short text on this page
Data Structure · Ack · Ack · Input Number Data · Ack
Page 204 of the LG Electronics 32LD4 user manual — APPENDIX
Page 204 · click to enlarge
Page 204

APPENDIX

OPEN SOURCE SOFTWARE NOTICE

The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements:

GPL EXECUTABLES• Linux kernel 2.6, busybox, e2fsprogs, gdbserver, jfsutils, mtd-utils, procps, u-boot, udhcpc
LGPL LIBRARIES• directFB, glibc, gconv
MPL LIBRARIES• Nanox

LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.com This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.

You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this prod- uct. Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/old- licenses/gpl-2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html

  • This product includes other open source software
  • expat:
  • copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
  • copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
  • freetype: copyright © 2003 The FreeType Project (<a href="http://www.freetype.org" rel="nofollow noopener" target="_blank">www.freetype.org</a>).
  • ICU: copyright © 1995-2008 International Business Machines Corporation and others.
  • libcurl: copyright © 1996 - 2008, Daniel Stenberg.
  • libjpeg: This software is based in part on the work of the Independent JPEG Group copyright © 1991 – 1998, Thomas G. Lane.
  • libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
  • libpng: copyright © 1998-2008 Glenn Randers-Pehrson
  • md5: copyright © 1991-2, RSA Data Security, Inc
  • md5 checksum : copyright © 1999, 2000, 2002 Aladdin Enterprises
  • ncurses: copyright © 1998 Free Software Foundation, Inc.
  • openSSL:
  • cryptographic software written by Eric Young.
  • software written by Tim Hudson.
  • software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (<a href="http://www" rel="nofollow noopener" target="_blank">http://www</a>
  • <a href="http://openssl.org" rel="nofollow noopener" target="_blank">openssl.org</a>)
  • strace :
  • copyright © 1991, 1992 Paul Kranenburg.

APPENDIX

  • copyright © 1993 Branko Lankester.
  • copyright © 1993 Ulrich Pegelow.
  • copyright © 1995, 1996 Michael Elizabeth Chastain.
Page 205 of the LG Electronics 32LD4 user manual — APPENDIX
Page 205 · click to enlarge
Page 205
  • copyright © 1993, 1994, 1995, 1996 Rick Sladkey.
  • copyright © 1998-2003 Wichert Akkerman.
  • copyright © 2002-2008 Roland McGrath.
  • copyright © 2003-2008 Dmitry V. Levin.
  • copyright © 2007-2008 Jan Kratochvil.
  • tinyxml: copyright © 2000-2006 Lee Thomason
  • xyssl: Copyright (C) 2009 Paul Bakker
  • zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, includ- ing without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, sub- ject to the following conditions:

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

APPENDIX

Page 206 of the LG Electronics 32LD4 user manual — APPENDIX
Page 206 · click to enlarge
Page 206

APPENDIX

OPEN SOURCE LICENSE

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to sur- render the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no war- ranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".

APPENDIX

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

Preamble

Page 207 of the LG Electronics 32LD4 user manual — APPENDIX
Page 207 · click to enlarge
Page 207
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copy- right notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard- less of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or exe- cutable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface defini- tion files, plus the scripts used to control compilation and installation of the executable. However, as a special excep- tion, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

APPENDIX

Page 208 of the LG Electronics 32LD4 user manual — APPENDIX
Page 208 · click to enlarge
Page 208

APPENDIX

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permis- sion to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indi- cate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con- ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat- isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the sec- tion is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

APPENDIX

Page 209 of the LG Electronics 32LD4 user manual — APPENDIX
Page 209 · click to enlarge
Page 209

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compil- ers) written by James Hacker.

APPENDIX

, 1 April 1989 Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.

Page 210 of the LG Electronics 32LD4 user manual — APPENDIX
Page 210 · click to enlarge
Page 210

APPENDIX

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.

We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.

APPENDIX

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.

Preamble

Page 211 of the LG Electronics 32LD4 user manual — APPENDIX
Page 211 · click to enlarge
Page 211

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the differ- ence between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with applica- tion programs (which use some of those functions and data) to form executables.

The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medi- um, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and dis- claimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distrib- ute a copy of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

APPENDIX

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard- less of who wrote it.

Page 212 of the LG Electronics 32LD4 user manual — APPENDIX
Page 212 · click to enlarge
Page 212

APPENDIX

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore cov- ered by this License. Section 6 states terms for distribution of such executables.

When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copy- right notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)

APPENDIX

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

Page 213 of the LG Electronics 32LD4 user manual — APPENDIX
Page 213 · click to enlarge
Page 213

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normal- ly accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permis- sion to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con- ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat- isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the sec- tion is intended to apply, and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

APPENDIX

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
Page 214 of the LG Electronics 32LD4 user manual — APPENDIX
Page 214 · click to enlarge
Page 214

APPENDIX

13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

APPENDIX

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker.

, 1 April 1990 Ty Coon, President of Vice

Page 215 of the LG Electronics 32LD4 user manual — APPENDIX
Page 215 · click to enlarge
Page 215

MOZILLA PUBLIC LICENSE

Version 1.1

1. Definitions.

1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.

1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.

1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.

1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof.

1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development com- munity for the electronic transfer of data.

1.5. "Executable" means Covered Code in any form other than Source Code.

1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.

1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.

1.8. "License" means this document.

1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the ini- tial grant or subsequently acquired, any and all of the rights conveyed herein.

1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is: A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.

B. Any new file that contains any part of the Original Code or previous Modifications.

1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License.

1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.

1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.

1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1. For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or manage- ment of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the out- standing shares or beneficial ownership of such entity.

APPENDIX

2. Source Code License.

2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intel- lectual property claims:

(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and

Page 216 of the LG Electronics 32LD4 user manual — APPENDIX
Page 216 · click to enlarge
Page 216

APPENDIX

(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).

(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.

(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices.

2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license

(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, repro- duce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or por- tions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and

(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or por- tions of such combination).

(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code.

(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has delet- ed from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor.

3. Distribution Obligations.

3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5.

3.2. Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party.

3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code.

APPENDIX

3.4. Intellectual Property Matters (a) Third Party Claims. If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.

Page 217 of the LG Electronics 32LD4 user manual — APPENDIX
Page 217 · click to enlarge
Page 217

(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file.

(c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.

3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liabil- ity obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or lia- bility terms You offer.

3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is avail- able under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documenta- tion or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer.

3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code.

4. Inability to Comply Due to Statute or Regulation.

If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the max- imum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it.

5. Application of this License.

This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code.

6. Versions of the License.

6.1. New Versions. Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number.

APPENDIX

6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subse- quent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License.

Page 218 of the LG Electronics 32LD4 user manual — APPENDIX
Page 218 · click to enlarge
Page 218

APPENDIX

6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your ver- sion of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.)

7. DISCLAIMER OF WARRANTY.

COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON- INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.

8. TERMINATION.

8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms here- in and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive.

8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as "Participant") alleging that:

(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.

(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant.

8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.

8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distrib- utors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination.

9. LIMITATION OF LIABILITY.

UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.

APPENDIX

Page 219 of the LG Electronics 32LD4 user manual — Open source software notice
Page 219 · click to enlarge
Page 219
10. U.S. GOVERNMENT END USERS.

The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.

11. MISCELLANEOUS.

This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License.

12. RESPONSIBILITY FOR CLAIMS.

As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, direct- ly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability.

13. MULTIPLE-LICENSED CODE.

Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alter- native licenses, if any, specified by the Initial Developer in the file described in Exhibit A.

EXHIBIT A -Mozilla Public License.

``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/

Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License.

The Original Code is

The Initial Developer of the Original Code is Portions created by are Copyright (C) All Rights Reserved.

Contributor(s):

Alternatively, the contents of this file may be used under the terms of the license (the "[___] License"), in which case the provisions of [ ] License are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [ ] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License."

[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]

Page 220 of the LG Electronics 32LD4 user manual — Open source software notice
Page 220 · click to enlarge
Page 220

Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.

Model :

Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)

Serial No. :

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the LG Electronics 32LD4

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the LG Electronics 32LD4

Be the first to ask — other owners or our team will answer.

Original document

LG Electronics 32LD4 manual PDF

220 pages·18.2 MB·Flat Panel Television·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…