
32LG30** 32LG32** 37LG30** 42LG30** 42LG32** 32LG5*** 37LG50** 42LG50** 47LG50** 52LG50**

Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
ID Number(s): 5499: 22LS4D-ZD 5507: 19LS4D-ZD 5629: 32LG2000-ZA 5721: 26LG3050-ZA 5630: 37LG2000-ZA 5631: 42LG2000-ZA 5088: 19LG3000-ZA 5090: 22LG3000-ZA 5080: 26LG3000-ZA 5089: 32LG3000-ZA 5087: 37LG3000-ZA 5086: 42LG3000-ZA 5085: 32LG5000-ZA 5084: 37LG5000-ZA 5083: 42LG5000-ZA 5082: 47LG5000-ZA 5081: 52LG5000-ZA 5385: 52LG5010-ZD 5386: 47LG5010-ZD 5387: 42LG5010-ZD 5388: 37LG5010-ZD 5389: 32LG5010-ZD 5390: 52LG5020-ZB 5391: 47LG5020-ZB 5392: 42LG5020-ZB 5393: 37LG5020-ZB 5394: 32LG5020-ZB 5395: 52LG5030-ZE 5396: 47LG5030-ZE 5397: 42LG5030-ZE 5398: 37LG5030-ZE 5399: 32LG5030-ZE 5671: 32LG5700-ZF 5820: 19LG3050-ZA 5818: 22LG3050-ZA 5879: 19LG3060-ZB 5880: 22LG3060-ZB 5878: 32LG5600-ZB 6507: 32LG3200-ZA 6511: 42LG3200-ZA
Extended Owner’s Manual that contains advanced fea- tures of these LG TV-sets is located on CD-ROM in electronic version. To read it You need to open chosen files by using Personal Computer (PC) equipped with CD-ROM drive.
Printed in Korea


* To connect an additional equipment, see the External equipment Setup section in CD Manual.


* To connect an additional equipment, see the External equipment Setup section in CD Manual.

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
If you ignore the caution message, you may be slightly injured or the product may be damaged.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur.
Do not use the product in damp place such as a bath- room or any place where it is likely to get wet. - This may cause a fire or could give an electric shock.
Make sure to turn off the product. Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be dam-
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center. - If you continue to use without taking proper measures, elec-
aged.
trical shock or fire can occur.
Do not shock the product when moving it. - You may be electrocuted or the product can be damaged.
Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause elec-
Install the product on a flat and stable place that has no risk of dropping the product. - If the product is dropped, you may be injured or the
tric shock or fire. Contact with the service center for repair.
product may be broken.
Keep the product away from direct sunlight. - The product can be damaged.
Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or
Do not place the product in a built-in installation such as bookcase or rack. - Ventilation required.
repair.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
Make sure to connect the power cable to the ground- ed current. - You may be electrocuted or injured.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normal- ly, or has been dropped.
Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. - You may be electrocuted due to excess moisture.
Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remian visible on the screen. This is known as image burn. Image burn is not covered under the manufacturer’s warranty.
During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out.

FRONT PANEL CONTROLS

Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5*** only)

BACK PANEL INFORMATION

L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
Component Input Connect a component video/audio device to these jacks.
Antenna Input Connect RF antenna to this jack.
RGB/DVI Audio Input Connect the audio from a PC or DTV.
PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D*) Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
Audio/Video Input (Except for 19/22LS4D*) Connect audio/video output from an external device to these jacks. S-VIDEO (Except for 19/22LS4D*, 32/37/42LG20**, 32/42LG32**) Connect S-Video out from an S-VIDEO device.
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
Headphone Socket (Except for 19/22LS4D*, 32/37/42LG20**, 32/42LG32**) Connect the headphone plug to this socket.
RGB IN (PC) Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.

A When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.



Fix the 4 bolts securely using the holes in the back of the TV.
2 Assemble the parts of the Stand Body with the Cover Base of the TV.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the parts of the STAND BODY with COVER BASE of the TV. Insert the STAND BODY into a COVER BASE until clicking sound.

STAND INSTALLATION (Only 19/22LS4D*)
DETACHING STAND (Only 19/22LS4D*)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Place the tv with its front facing downward on a cushion or soft cloth.
Pull the Cover Base backward during pressing a button on the Stand Body.
Hold the Cover Base and pull with shake it backward to separate from the Stand Body.
Insert the Stand Body into the TV until clicking sound.
4 Hold the Stand Body and bend it upward.
Assemble the parts of the Stand Body with the Cover Base of the TV.
5 Pull stand body to separate from the TV during pressing 2 latches.


Connect the cables as neces- sary. To connect additional equip- ment, see the External Equipment Setup section of the manual.
To connect additional equipment, see the External Equipment Setup section.
First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3 Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
G When moving the TV undo the cords first.
G Use a platform or cabinet strong and large enough to support the size and weight of the TV.
G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.


Power Supply · Circuit breaker

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.









4 inches 4 inches 4 inches
Attaching the TV to a desk (Only 32/37/42LG20**, 26/32/37/42LG30**, 32/42LG32**, 32/37/42LG5***)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
1-Screw (provided as parts of the product) Desk
G To prevent TV from falling over, the TV should be securely attached to the floor/wall per
installation instructions. Tipping, shaking, or rocking the machine may cause injury.
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.


4 inches 4 inches



When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the PROTECTION COVER into the TV until clicking sound.


Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)



When using the remote control, aim it at the remote control sensor on the TV.

INPUT External input mode rotate in regular sequence. Switches the TV on from standby.
THUMBSTICK(Up/Down/LeftRight) Allows you to navigate the on-screen menus and adjust the system settings to your preference. OK Accepts your selection or displays the current mode.
MENU Selects a menu. Clears all on-screen displays and returns to TV view- ing from any menu.
Programme UP/DOWN Selects a programme.
Q.VIEW Returns to the previously viewed programme.
POWER Switches the TV on from standby or off to standby.
correct polarity (+with +,-with -).

TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the r / I, INPUT or P (or PR D E) button on the TV or press the POWER, INPUT, D/A, P (or PR + -) or NUMBER button on the remote control and the TV will switch on. 2
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning.
depending on the DTV broadcasting environment. d. "Home” mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data, “In
Store” mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
The installation guide menu appears on the TV screen when it is switched on for the first time.
S elect your desired language. 1
OK
* If you want to change Language/ Country selection
3 Select your desired language or country. 4 Save it.
Select OPTION.
Select Menu Language or Country.
OK
NOTE !
G If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on
G If you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
G The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
G DTV mode control buttons may not function based on country broadcasting circumstances.
G In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending
on digital broadcasting circumstances.
G The Country Setting “UK” should only be activated UK.
Initializing setup


Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.


Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously stored service information will be deleted.

MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
ATo remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
ADo not to use a wet cloth.
G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD"
double-click your language.
To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file.
The TV does not operate properly.
A Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Ensure that the correct remote operating mode is set: TV, VCR etc.
A Install new batteries.
A Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A Is Auto sleep activated on this station?

The video function does not work.
A Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
No picture &No sound
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
A Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
No or poor colour
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A Check for local interference such as an electrical appliance or power tool.
A Station or cable channel experiencing problems, tune to another station.
A Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A Check antenna (Change the position of the antenna).
A Check HDMI cable over version 1.3.
No picture when connecting HDMI
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
A Press the VOLUME button.
A Sound muted? Press MUTE button.
Picture OK & No sound
A Try another channel. The problem may be with the broadcast.
A Are the audio cables installed properly?
No output from one
A Adjust Balance in menu option.
A A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when connecting HDMI or
A Check HDMI cable over version 1.3.
A Check USB cable over version 2.0.
*This feature is not available for all models.

There is a problem with PICTURE settings.
When the user changes the picture settings, the TV automatically converts back to the initial settings
A It means that the TV is currently set to In Store mode.
To switch to Home mode you should do the followings: From the TV Menu, choose OPTION -> Factory Reset -> Yes (wait for a few seconds for the TV to download again) -> OSD "WELCOME" appears -> Press OK button -> Choose Language -> Choose Home -> Select your Country and Time Zone -> Press OK button. Program search will begin automatically (You can stop the search by pressing the OK button). Now, you have completed switching to the Home mode.
after a certain period of
time.
22LS4D*
19LG30**
MODELS
19LG3000-ZA 19LG3050-ZA 19LG3060-ZB
19LS4D-ZD
22LS4D-ZD
5.1 kg / 11.3 lbs 4.6 kg / 10.2 lbs 6.1 kg / 13.5 lbs 5.7 kg / 12.6 lbs 5.02 kg / 11.1 lbs 4.76 kg / 10.5 lbs
26LG30**
32LG30**
MODELS
22LG3000-ZA 22LG3050-ZA 22LG3060-ZB
26LG3000-ZA 26LG3050-ZA
32LG3000-ZA 32LG3030-ZA
5.6 kg / 12.4 lbs 5.34 kg / 11.8 lbs 10.1 kg / 22.3 lbs 8.6 kg / 19.0 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs
42LG30**
32LG20**
37LG20**
MODELS
37LG3000-ZA 37LG3030-ZA
42LG3000-ZA 42LG3030-ZA
32LG2000-ZA
37LG2000-ZA
18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs 23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs
18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs
32LG32**
42LG32**
32LG5*** 32LG5000-ZA 32LG5010-ZD 32LG5020-ZB 32LG5030-ZE 32LG5600-ZB 32LG5700-ZF
42LG2000-ZA
32LG3200-ZA
42LG3200-ZA
MODELS
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs 14.1 kg / 31.1 lbs 12.6 kg / 27.8 lbs
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs
42LG50**
47LG50**
52LG50**
37LG5000-ZA 37LG5010-ZD 37LG5020-ZB 37LG5030-ZE
42LG5000-ZA 42LG5010-ZD 42LG5020-ZB 42LG5030-ZE
47LG5000-ZA 47LG5010-ZD 47LG5020-ZB 47LG5030-ZE
52LG5000-ZA 52LG5010-ZD 52LG5020-ZB 52LG5030-ZE
MODELS
18.3 kg / 40.4 lbs 15.6 kg / 34.4 lbs 26.2 kg / 57.8 lbs 23.5 kg / 51.8 lbs 39.5 kg / 87.1 lbs 34.9 kg / 77.0 lbs 29.2 kg / 64.4 lbs 24.6 kg / 54.3 lbs


Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.