Instruction/ maintenance manual of the product D1454BF LG
Go to page of 36
O WNER’S MANU AL WA SHING MA CHINE WM0642H* P/ NO : MFL312 45123 www .lg.com Please re ad this manual ca re fully bef ore operating your set and re tain it f or futu re re fe rence. DISH WA SHER O WNER'S MANU AL Please re ad this manual carefully bef ore operating your dishwasher .
2 ONTENTS C SAFETY AND CAUTION 3 INSTALLATION INSTRUCTIONS 5 PARTS NAME 9 FUNCTION OF CONTROL BUTTON 10 BEFORE USING FOR THE FIRST TIME 15 INFORMATION FOR ENERGY TEST 17 HOW TO USE AND OPERATE 18 OPER.
3 AFETY AND CAUTION S • Please read this manual carefully before using the dishwasher for the first time. • This manual contains very important notes regarding the installation, use and maintenance of your dishwasher. • The manufacturer can not be responsible for problems caused by ignoring these safety and caution instructions.
AFETY AND CAUTION S GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord that has an equipment grounding conductor and a grounding plug.
NST ALLA TION INSTRUCTIONS I Step 1 : PREP ARE CUPBOARD OPENING Step 2 : PREP ARA TION FOR ELE CTRICAL WIRING 1 This appliance must be supplied with correct rating voltage and hertz as shown on instruction manual, and connected to an individual, properly earthed branch circuit, protected by a minimum 15 amp circuit breaker or time delay fuse.
NST ALLA TION INSTRUCTIONS I Step 3 : PREP ARING THE DISHW ASHER FOR INST ALLA TION 1 Lay the dishwasher on its back. 2 Adjust the legs to the required height as shown in below figure.
NST ALLA TION INSTRUCTIONS I Step 5 : INST ALLA TION OF DRAIN HOSE 1 If the end of drain hose does not fit to the drain line, use a rubber connector(not supplied) that is resistant to heat and detergent. 2 This should be available from a plumbing shop or DIY merchants.
NST ALLA TION INSTRUCTIONS I 8 Step 6 : INST ALLA TION OF W A TER INLET HOSE • This dishwasher may be fed with either hot or cold water. If the water can not be maintained below 65ºC, the dishwasher must be connected to cold water. • When connecting, you may use sealant tape or sealing compound to avoid water leaks.
ARTS NAME 9 P 1. Control Panel 2. Door Handle 3. Front Cover 4. Lower Cover 5. Display Window 6. Power Button 7. Drain Hose 8. Inlet Hose 9. Power Cord 10. Adjustable Leg 11. Upper Rack 12. Cutlery Basket 13. Detergent And Rinse Aid Dispenser 14. Vapor Vent Cover 15.
UNCTION OF CONTROL BUTTON F 10 MODEL : D1455W(L,M,T ,B,C,D,A)F(B,U) MODEL : D1454W(L,M,T ,B,C,D,A)F(B,U).
11 SMART DIAGNOSIS ™ function is available only for the products with a SMART DIAGNOSIS ™ mark. (Refer to Page 32.).
UNCTION OF CONTROL BUTTON F 12 MODEL : D1465W(L,M,T ,B,C,D,A,)F(B,U) DW -TS610S / DW -TS610T / DW -TS610W MODEL : D1464W(L,M,T ,B,C,D,A,)F(B,U) DW -TS605T / DW -TS605W.
13 SMART DIAGNOSIS ™ function is available only for the products with a SMART DIAGNOSIS ™ mark. (Refer to Page 32.).
UNCTION OF CONTROL BUTTON ① Prog ramme • Press the cycle that corresponds to your desired wash cycle. ② Rinse • Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+. • If you select the Extra Hot ( ) function, the operating temperature will be up to 80 ℃ .
■ Method 1 1) Check the water hardness in your area. (Your water utility company can help you with this.) 2) Set the softening system level of your dishwasher according to the water hardness level. Refer to Step 2. ■ Method 2 1) Check your water hardness by using test strip.
EFORE USING FOR THE FIRST TIME B 16 Step 4. A dding Rinse Aid ■ For filling Step 3. Salt F illing Fill the regenerating salt container before starting the washing programme . Once you have filled with salt you must run the Quick course immediately to remove salt and salt water around the tub in order to prevent corrosion.
NFORMA TION FOR ENERGY TEST (EN50242) I 1 2 3 4 5 6 7 8 17 ■ Appliance loaded in accordance with standard specifications. • Capacity : 14 place settings • Comparability course : Eco • Rinse Aid setting : 4 • Reference cleaner : 35g of detergent onto the inside surface of the door.
OW TO USE AND OPERA TE 18 H Daily use load 1. Cutlery Basket 2. Cutlery Rack 3. Upper Rack 4. Lower Rack Do not use the pot and pan with plastic handle.
OW TO USE AND OPERA TE 19 H Be careful when loading and unloading sharp-edged items. Load sharp knives with the blade down in order to reduce the risk of injury . For better washing performance, always load the dishwasher according to the instructions.
OW TO USE AND OPERA TE Always remove cutlery from the rack before removing the rack. NOTE 20 2. C utler y Basket Place forks and spoons in the cutlery basket with their handles downwards. 3. Lo wer Rack The lower rack is suitable for dinner plates, soup bowls, dishes, pots, pans, lids and even the grill tray.
OW TO USE AND OPERA TE 21 Plates should be positioned upwards with the plate bottom facing the front of the rack. Cups, glasses and bowls must be positioned upside down. ■ How to fold down Take care not to obstruct the rotation of the spray arms. To make it easier to load larger dishes, the front row of tines can be folded down .
OW TO USE AND OPERA TE 22 How to fold down Long stem glassware can be placed without interference from the lowered tines. • Pull up the tine • Rotate the tine Take care not to obstruct the rotation of the spray arm under the upper rack. To make it easier to load larger cups or glasses, the left side row of tines can be folded down.
OW TO USE AND OPERA TE Use only the detergent intended for household dishwashers. (Ordinary hand-washing detergent should not be used, because the foam will interfere with proper operation.) When using some dishwasher tablets, the dispenser may not open due to their excessive size.
OW TO USE AND OPERA TE H 24 6. Refilling ■ For refilling Rinse Aid Depending on the dosage setting and the number of washes, the chamber may need to be topped up, approximately once a month. The rinse aid level can be checked by two methods. • By the indicator window on the dispenser when the dishwasher door is fully open.
OW TO USE AND OPERA TE H 25 When the salt container is empty, the salt refill lamp will automatically turn on during operation. The salt should be refilled after the cycle has finished. We recommend the salt refill should always be carried out, as mentioned on previous page, prior to starting the next operation.
PERA TING SEQUENCE O 26 Press the P ow er button Check there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is required. Open the door and check the filters Ensure they are clean and properly positioned. (See User Maintenance Instructions) Load the dishes Remove any excess food.
ROGRAMME P 27 27 ▶ Runnin g t im e may vary a cc ordin g to the water t emper at ur e , water pr ess ur e an d volt ag e. ▶ Runnin g t im e do esn ’ t in c lud e Coo l Dry - 60mi n.
SER MAINTENANCE INSTRUCTIONS U 28 28 T o prevent trouble and poor operating, it is important to check filters and spray arms at regular intervals. ■ After each cycle, clean the filter for a better washing result. ■ Before starting, check that the filter is assembled well.
ROUBLE SHOOTING GUIDE 29 29 ■ If a problem occurs check below to see whether this can be solved. ■ In the unlikely event that the problem cannot be rectified, please contact a service engineer . Problem No lights come on when the power is turned on.
ROUBLE SHOOTING GUIDE T 30 30 Problem The display shows OE code. (W ater is not pumped away .) • The drain hose is kinked. • The filter is clogged. • Motor trouble. (W ashing motor or Drain motor) The display shows IE code. • W ater is not supplied.
Code Description ROUBLE SHOOTING GUIDE T 31 The display shows PF code This indicates there was a power failure. This function protects the dishwasher in the event that the power goes out or the power to the unit is disrupted. When power is returned, and a button is pushed, this will display for 10 seconds and then go away .
ROUBLE SHOOTING GUIDE T 32 Only use this feature when instructed to do so by the call centre. The transmission sounds similar to a fax machine, and so has no meaning except to the call centre. SMART DIAGNOSIS™ can not be activated if the dishwasher does not power up.
PECIFICA TION S 33 DW-TS610S / DW-TS610T / DW-TS610W DW-TS605T / DW-TS605W D1455W(L,M,T,B,C,D,A)F D1454W(L,M,T,B,C,D,A)F D1465W(L,M,T,B,C,D,A)F D1464W(L,M,T,B,C,D,A)F D1455W(L,M,T,B,C,D,A)U D1454W(L,M.
EMO 34 M.
EMO 35 M.
Y ou may also find owner's manual in video v ersion at f ollowing link www .lg. com/ steamdishwasher CUST OMER SERVICES T el. Fa x . L GEUK SERVICE WEB-SITE F or U.K . Customer : +44-(0) 844 847 L GL G(5454) : +44-(0) 844 847 1413 : http://www .lge.
An important point after buying a device LG D1454BF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG D1454BF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG D1454BF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG D1454BF you will learn all the available features of the product, as well as information on its operation. The information that you get LG D1454BF will certainly help you make a decision on the purchase.
If you already are a holder of LG D1454BF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG D1454BF.
However, one of the most important roles played by the user manual is to help in solving problems with LG D1454BF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG D1454BF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
