EN
Lexmark logo
Official user manual

Lexmark Z53

46 pages·891 KB·Printer·PDF·ENDEFRITNLJA
Lexmark Z53
Table of Contents 27 sections Contents · Steps to basic printing · Step One: Load the paper · Step Two: Customize the Printer Properties · … ShowHide
Page 1 of the Lexmark Z53 user manual — Lexmark Z53 Lexmark Z53 Lexmark Z53 Lexmark Z53
Page 1 · click to enlarge
Page 1

Lexmark Z53 Lexmark Z53 Lexmark Z53 Lexmark Z53

Color Jetprinter

User’s Guide for Windows 95 and Windows 98

Page 2 of the Lexmark Z53 user manual
Page 2 · click to enlarge
Page 2
EditionFebruary 2001

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

Lexmark, Lexmark with diamond design, and ColorFine are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc.

Other trademarks are the property of their respective owners.

© Copyright 2001 Lexmark International, Inc. All rights reserved.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550.

Page 5 of the Lexmark Z53 user manual — Steps to basic printing
Page 5 · click to enlarge
Page 5
Lexmark Z53 — Steps to basic printing diagram (page 5)
Fig. 1 · Steps to basic printing

Steps to basic printing

Steps to basic printing Steps to basic printing Steps to basic printing Steps to basic printing

This book describes how to use your printer on Windows 95 and Windows 98. For help using your printer with:

  • Windows NT 4.0 or Windows 2000, refer to the User’s Guide button on the Printer Software CD for Windows.
  • Macintosh OS 8.6 or higher, refer to the User’s Guide icon found in the desktop Lexmark Z53 folder.

Basic printing is as easy as:

1 Load the paper (see the next section) 2 Customize the Printer Properties (see page 5) 3 Print your document (see page 8)

1

Steps to basic printing

Page 6 of the Lexmark Z53 user manual — Step One: Load the paper
Page 6 · click to enlarge
Page 6

Step One: Load the paper Step One: Load the paper Step One: Load the paper Step One: Load the paper

You can load up to 100 sheets of paper (depending on thickness).

1 Place the paper against the right side of the sheet feeder, with the print side facing you.

Lexmark Z53 — Step One: Load the paper diagram (page 6)
Fig. 2 · Step One: Load the paper

2 Squeeze the release tab and the paper guide together and slide the paper guide to the edge of the paper.

Page 7 of the Lexmark Z53 user manual — Loading specialty papers Loading specialty papers Loading specialty papers Loading specialty papers
Page 7 · click to enlarge
Page 7

Loading specialty papers Loading specialty papers Loading specialty papers Loading specialty papers

Steps to basic printing

Follow these guidelines when loading specialty papers:

Load up to:Make su • the pri • the env agains feeder agains • The sta left cor • the pri • the car sheet f cards. • the pri • the pa • you pla the pri unatta page o the she • the pa edge o Note: Se Printer P

10 transparencies • the rough side of the transparency is facing you (smooth side down).

  • the paper guide is against the edge of the transparencies.
  • Steps to basic printing 3
Page 8 of the Lexmark Z53 user manual — Step One: Load the paper
Page 8 · click to enlarge
Page 8

Load up to: Load up to: Load up to: Load up to: Make sure: Make sure: Make sure: Make sure:

up to 100 sheets of custom- sized paper

  • the print side is facing you and the paper guide is against the side of the paper.
  • your paper size fits within these dimensions:

- Width dimensions:

76 mm to 216 mm

3.0” to 8.5” - Length dimensions:

127 mm to 432 mm

5.0” to 17.0”

25 iron-on transfers • you load the iron-on transfers following the instructions on the package.

  • the paper guide is against the side of the iron-on transfers.
Page 9 of the Lexmark Z53 user manual — Steps to basic printing
Page 9 · click to enlarge
Page 9

Step Two: Customize the Printer Properties Step Two: Customize the Printer Properties Step Two: Customize the Printer Properties Step Two: Customize the Printer Properties

Steps to basic printing

Your printer software includes several applications that let you easily perform printing tasks. One of these applications is called Printer Properties.

The Printer Properties application include four tabs: Job Finishing, Paper, Document/Quality, and Advanced. Each tab contains settings relating to the operation of your printer and its software.

Opening the Printer Properties Opening the Printer Properties Opening the Printer Properties Opening the Printer Properties

You can open the Printer Properties from almost every application. This lets you change printer settings ONLY for the document(s) you are currently creating in the application. To open the Printer Properties from an application:

1 Open the application’s File menu. 2 Choose Print (or Printer) Setup. 3 In the Printer Setup dialog box, click the Properties, Option, or Setup button (depending on the application). 4 Change settings as needed.

When you open the Printer Properties from Windows, the settings apply to ALL documents, unless you change them from the application. To open the Printer Properties from Windows:

1 From the Start menu, select Settings, and then select Printers. 2 From the Printers folder, right-click the printer icon for your printer. 3 Select Properties from the sidebar menu.

  • Steps to basic printing 5
Page 10 of the Lexmark Z53 user manual — Step Two: Customize the Printer Properties
Page 10 · click to enlarge
Page 10

Click the... Click the... Click the... Click the...

Paper tab to:

  • Select a paper size and orientation
  • Set the number of copies to print
  • Reverse the printing order of your document pages. The first page of your document will be on top of the stack in the paper exit tray.
  • Collate your document

Document/Quality tab to select:

  • Color settings for the document type you are printing
  • The paper type you are using
  • A print quality setting
  • Web Smoothing when you are printing from the internet
  • Allow Pages to Dry
  • The default settings
Lexmark Z53 — Step Two: Customize the Printer Properties diagram (page 10)
Fig. 3 · Step Two: Customize the Printer Properties

Job Finishing Job Finishing Job Finishing Job Finishing tab to print:

Advanced tab to adjust:

  • Handouts
  • Posters
  • Booklets
  • Two-sided documents
  • Halftone settings
  • Image settings
Page 11 of the Lexmark Z53 user manual — Steps to basic printing
Page 11 · click to enlarge
Page 11

Choosing printer settings for specialty papers Choosing printer settings for specialty papers Choosing printer settings for specialty papers Choosing printer settings for specialty papers

Steps to basic printing

When your printer software was first installed, the Printer Properties settings were set to the default settings. Use the default settings for printing most documents on plain paper. To change your printer settings for printing on specialty papers, use the following table:

When you are printing on this specialty paper:Click this Printer Properties tab: Paper Document/Quality Paper Document/Quality
To make these selectionsTo make these selections: To make these selections: To make these selections:

From the Paper Type area, select Greet- ing Card Stock.

Select the appropriate Paper Size set- ting.

Banner paper Paper From the list of Paper Sizes, select Ban- ner or Banner A4.

  • Steps to basic printing 7
Page 12 of the Lexmark Z53 user manual — Step Three: Print your document
Page 12 · click to enlarge
Page 12
When you are printing on this specialty paper:Click this Printer Properties tab:To make these selections: Sheets of custom size paperPaperFrom the list of Paper Sizes, scroll to select Custom. Enter the dimensions for your custom paper size. For help, see “Loading specialty papers” on page 3. Iron-on transfersDocument/QualityFrom the Paper Type area, select Iron-On Transfer. TransparenciesDocument/QualityFrom the Paper Type area, select Transparency. Select Normal (600 x 600 dpi), High (1200 x 1200 dpi), or Maximum (2400 x 1200 dpi) Print Quality. Note: When printing transparencies, remove each transparency as it exits from the printer and allow it to dry before stacking.

Step Three: Print your document Step Three: Print your document Step Three: Print your document Step Three: Print your document

1 From your application’s File menu, click Print. 2 From the Print dialog box, click OK or Print (depending on the application).

Page 13 of the Lexmark Z53 user manual — Printing beyond the basics
Page 13 · click to enlarge
Page 13
Lexmark Z53 — Printing beyond the basics diagram (page 13)
Fig. 4 · Printing beyond the basics

Printing beyond the basics Printing beyond the basics Printing beyond the basics Printing beyond the basics

Printing beyond the basics

You can use your printer to print:

  • on both sides of a sheet of paper (see the next section)
  • handouts (see page 12)
  • booklets (see page 15)
  • posters (see page 18)

Printing on both sides of a sheet of paper Printing on both sides of a sheet of paper Printing on both sides of a sheet of paper Printing on both sides of a sheet of paper

Your Lexmark printer lets you print on both sides of a sheet of paper. Besides saving paper, this feature is helpful when you want to print booklets or tablets.

Step One: Load the paper Step One: Load the paper Step One: Load the paper Step One: Load the paper

Load up to 100 sheets of paper against the right side of the sheet feeder. For help, see page 2.

9

Printing beyond the basics

Page 14 of the Lexmark Z53 user manual — Printing beyond the basics
Page 14 · click to enlarge
Page 14

Step Two: Customize the Printer Properties for your Step Two: Customize the Printer Properties for your Step Two: Customize the Printer Properties for your Step Two: Customize the Printer Properties for your two-sided print job two-sided print job two-sided print job two-sided print job

1 Open the Printer Properties. For help, see page 5. 2 Select the page orientation and size: a Click the Paper tab. b Select the appropriate Paper Size Paper Size Paper Size Paper Size. c Select Portrait or Landscape orientation. 3 Customize the Printer Properties for two-sided printing:

Lexmark Z53 — Printing beyond the basics diagram (page 14)
Fig. 5 · Printing beyond the basics

a Click the Job Finishing tab.

b Select Two-sided printing.

paper reloading instructions, select Print reloading instructions after the first after the first after the first after the first side prints side prints side prints side prints.

c Select a binding edge binding edge binding edge binding edge. When you select Portrait orientation, choose between these binding edge options.

e Click OK.

d To receive · Long Edge Binding · Short Edge Binding

Page 15 of the Lexmark Z53 user manual — Printing beyond the basics
Page 15 · click to enlarge
Page 15
Lexmark Z53 — Printing beyond the basics diagram (page 15)
Fig. 6 · Printing beyond the basics

Step Three: Print your two-sided document Step Three: Print your two-sided document Step Three: Print your two-sided document Step Three: Print your two-sided document

1 From your application’s File menu, select Print. The odd- numbered pages print first. 2 When the first side of all your two-sided document is finished printing, your printer software prompts you to reload the paper.

Printing beyond the basics

a When the entire stack

is finished printing, remove the stack.

b Flip the stack of paper.

c Insert the stack of paper and instruction page with the printed side facing away from you and the arrows pointing down.

3 Click OK. The even-numbered pages print on the other side. 4 To return to single-sided printing: a From the Printer Properties, click the Job Finishing Job Finishing Job Finishing Job Finishing tab. b Make sure Two-sided printing Two-sided printing Two-sided printing Two-sided printing is not selected. c Click OK.

  • Printing beyond the basics 11 11 11 11
Page 16 of the Lexmark Z53 user manual — Printing handouts Printing handouts Printing handouts Printing handouts
Page 16 · click to enlarge
Page 16

Printing handouts Printing handouts Printing handouts Printing handouts

You can conserve paper by printing handouts or multiple page images on a single sheet of paper.

Step One: Load the paper Step One: Load the paper Step One: Load the paper Step One: Load the paper

Four page images on a single sheet of paper

Load up to 100 sheets of paper against the right side of the sheet feeder. For help, see page 2.

Step Two: Customize the Printer Properties for Step Two: Customize the Printer Properties for Step Two: Customize the Printer Properties for Step Two: Customize the Printer Properties for handouts

You can print your handouts on one side of the paper, or on both sides of the paper.

1 Open the Printer Properties. For help, see page 5. 2 Select the page orientation for the page images: The page orientation you select in the Paper tab reflects the orientation of the page image and not the sheet of paper the page image prints on. a Click the Paper tab. b From the Orientation area, select Portrait or Landscape. 3 From the Paper Size Paper Size Paper Size Paper Size area, select a paper size.

Page 17 of the Lexmark Z53 user manual — Printing beyond the basics
Page 17 · click to enlarge
Page 17

4 Customize the Printer Properties for printing handouts: The screen graphic changes as you make selections, showing how the printed page will look.

Printing beyond the basics

a Click the Job Finishing tab.

Lexmark Z53 — Printing beyond the basics diagram (page 17)
Fig. 7 · Printing beyond the basics

Handout.

c Select the Number of Prints Number of Prints Number of Prints Number of Prints (page images) to print on a single sheet.

The graphic shows three Portrait- oriented page images with Page Borders Page Borders Page Borders Page Borders.

d To print a

representation of the paper edges for each page image, select Print Page Print Page Print Page Print Page Borders.

5 To print your handout on one side of the paper, click OK. To print your handout on both sides of the paper: a Select Two-sided printing Two-sided printing Two-sided printing Two-sided printing. b To receive paper reloading instructions, select Print reloading instructions after the first side prints reloading instructions after the first side prints reloading instructions after the first side prints reloading instructions after the first side prints. c Click Long Edge Binding Long Edge Binding Long Edge Binding Long Edge Binding or Short Edge Binding Short Edge Binding Short Edge Binding Short Edge Binding. d Click OK.

  • Printing beyond the basics 13 13 13 13

b Select

Page 18 of the Lexmark Z53 user manual — Printing handouts
Page 18 · click to enlarge
Page 18

Step Three: Print your handouts Step Three: Print your handouts Step Three: Print your handouts Step Three: Print your handouts

  • 1 From your application’s File File File File menu, select Print Print Print Print. 2 From the Print dialog box, click OK OK OK OK or Print Print Print Print (depending on the application).
  • If you formatted your handouts to print on one side of each page, go to step 5.
  • If you formatted your handouts for two-sided printing, continue with printing the second side of your handouts. 3 When the first side of all your handouts is finished printing, your printer software prompts you to reload the paper.
Lexmark Z53 — Printing handouts diagram (page 18)
Fig. 8 · Printing handouts

a When the entire stack is

finished printing, remove the stack.

b Flip the stack of paper.

c Insert the stack of paper and instruction page with the printed side facing away from you and the arrows pointing down.

4 Click OK. The even-numbered pages print on the other side. 5 To go back to normal printing: a From the Job Finishing Job Finishing Job Finishing Job Finishing tab, select Normal. b Click OK.

Page 19 of the Lexmark Z53 user manual — Printing beyond the basics
Page 19 · click to enlarge
Page 19

Printing booklets Printing booklets Printing booklets Printing booklets

You can print and bundle your document together to make a booklet.

Printing beyond the basics

Step One: Load the paper Step One: Load the paper Step One: Load the paper Step One: Load the paper

Load up to 100 sheets of paper against the right side of the sheet feeder. For help, see page 2.

Step Two: Customize your Printer Properties Step Two: Customize your Printer Properties Step Two: Customize your Printer Properties Step Two: Customize your Printer Properties

  • 1 Select the correct paper size in your software application. You can select from these paper sizes when printing booklets:
  • Statement
  • Letter
  • A4
  • A5 2 Open the Printer Properties. For help, see page 5. 3 Click the Job Finishing Job Finishing Job Finishing Job Finishing tab. 4 Select Booklet Booklet Booklet Booklet. 5 To receive paper reloading instructions, click Print Print Print Print reloading instructions after the first side prints reloading instructions after the first side prints reloading instructions after the first side prints reloading instructions after the first side prints. 6 Select the number of Sheets Per Bundle Sheets Per Bundle Sheets Per Bundle Sheets Per Bundle. Notes: A bundle is any number of sheets of paper folded together. For help, see page 17.

When printing with a heavier paper stock, select a smaller number of Sheets Per Bundle to allow for binding considerations.

7 Click OK.

  • Printing beyond the basics 15 15 15 15
Page 20 of the Lexmark Z53 user manual — Printing booklets
Page 20 · click to enlarge
Page 20

Step Three: Print your booklet Step Three: Print your booklet Step Three: Print your booklet Step Three: Print your booklet

1 From your application’s File menu, select Print. 2 From the Print dialog box, click OK or Print (depending on the application). 3 When the first side of your booklet is finished printing, your printer software prompts you to reload the paper.

Lexmark Z53 — Printing booklets diagram (page 20)
Fig. 9 · Printing booklets

a When the entire stack is

finished printing, remove the stack.

b Flip the stack of paper.

c Insert the stack of paper and instruction page with the printed side facing away from you and the arrows pointing down.

4 Click OK. The even-numbered pages print on the other side. 5 To go back to normal printing: a From the Job Finishing Job Finishing Job Finishing Job Finishing tab, select Normal. b Click OK. 6 Assemble your booklet. For help, see page 17.

Page 21 of the Lexmark Z53 user manual — Printing beyond the basics
Page 21 · click to enlarge
Page 21

Building a booklet Building a booklet Building a booklet Building a booklet

Once your document prints, stack the bundles together and bind your booklet.

Printing beyond the basics

1 Take the first bundle from the paper exit tray, fold it in half and set it aside. 2 Take the next bundle, fold it in half, and stack it on top of the first bundle. 3 Stack the rest of your bundles, one on top of the other, until your booklet is complete.

Five bundles stacked to form a booklet.

4 Bind the bundles together to complete your booklet.

  • Printing beyond the basics 17 17 17 17
Page 22 of the Lexmark Z53 user manual — Printing posters Printing posters Printing posters Printing posters
Page 22 · click to enlarge
Page 22

Printing posters Printing posters Printing posters Printing posters

You can use the printer software to enlarge the size of your printout. For example, you can enlarge a photograph to poster size.

A single page enlarged to a nine page poster.

Step One: Load the paper Step One: Load the paper Step One: Load the paper Step One: Load the paper

Load up to 100 sheets of paper against the right side of the sheet feeder. For help, see page 2.

Step two: Customize the Printer Properties for your Step two: Customize the Printer Properties for your Step two: Customize the Printer Properties for your Step two: Customize the Printer Properties for your poster

1 Open the Printer Properties. For help, see page 5. 2 Click the Job Finishing Job Finishing Job Finishing Job Finishing tab. 3 Select Poster. 4 Select your poster size. The number you select represents the number of pages that make up the height and width of your poster. For example, if you select 4 x 4, your printed poster is four pages high and four pages wide. 5 Select Show Crop Marks Show Crop Marks Show Crop Marks Show Crop Marks if you want to print markers that show you where to easily trim (crop) the unprinted white space from the edges of the paper. 6 Click OK.

Lexmark Z53 — Printing posters Printing posters Printing posters Printing posters diagram (page 22)
Fig. 10 · Printing posters Printing posters Printing posters P…

Crop marks make it easy to trim the poster pages.

Page 23 of the Lexmark Z53 user manual — Printing beyond the basics
Page 23 · click to enlarge
Page 23

Step Three: Print and assemble your poster Step Three: Print and assemble your poster Step Three: Print and assemble your poster Step Three: Print and assemble your poster

1 From your application’s File menu, select Print. 2 From the Print dialog box, click OK or Print (depending on the application). Note: If you need to reprint a specific page(s) of your poster, skip to the next section.

Printing beyond the basics

3 On each printed page, trim the white edges from two adjacent sides. For example, trim the white edge from the top and left sides of each page.

Printed pages with the white edge trimmed from two adjacent sides

4 Arrange the pages so that every trimmed edge overlaps an untrimmed edge (the white edge). 5 Tape the backs of the pages together. 6 To complete your poster, trim any remaining white edges.

  • Printing beyond the basics 19 19 19 19

Trimmed edges · Untrimmed edges

Page 24 of the Lexmark Z53 user manual — Printing posters
Page 24 · click to enlarge
Page 24

Selecting specific pages to print Selecting specific pages to print Selecting specific pages to print Selecting specific pages to print

You can reprint specific pages of your poster without having to reprint all of the pages of your poster. To select specific pages to print:

1 From the Job Finishing Job Finishing Job Finishing Job Finishing tab, click Select Pages to Print Select Pages to Print Select Pages to Print Select Pages to Print. 2 From the Select Pages to Print screen:

Lexmark Z53 — Printing posters diagram (page 24)
Fig. 11 · Printing posters

In the example shown, only one page, tile 1, is selected to print.

Click Select All Select All Select All Select All to select all the tiles, and then click the tiles you do not want to print.

To quickly select a few tiles to print, click Remove All Remove All Remove All Remove All to remove all the tiles, and then click the tiles you want to print.

Click OK.

3 Print your poster page(s). 4 Assemble your poster. For help, see page 19. 5 To go back to regular printing: a From the Job Finishing Job Finishing Job Finishing Job Finishing tab, select Normal. b Click OK.

or

Page 25 of the Lexmark Z53 user manual — Maintaining your printer
Page 25 · click to enlarge
Page 25

Maintaining your printer Maintaining your printer Maintaining your printer Maintaining your printer

Maintaining your printer

Using the Control Program Using the Control Program Using the Control Program Using the Control Program

The Control Program lets you monitor your printer, and install or replace print cartridges. To open the Control Program from the Start menu, click:

1 Programs. 2 Lexmark Z53 Series Lexmark Z53 Series Lexmark Z53 Series Lexmark Z53 Series. 3 Lexmark Z53 Control Program Lexmark Z53 Control Program Lexmark Z53 Control Program Lexmark Z53 Control Program.

Click the... Click the... Click the... Click the...

Status tab to:

Cartridges tab to:

  • Install or replace print cartridges
  • Align print cartridges for best print quality
  • Clean the print nozzles
  • View cartridge part numbers and order supplies directly from Lexmark’s Web site
  • Monitor the status of your print job
  • Cancel your print job
  • Print a test page
  • View your ink levels
Lexmark Z53 — Maintaining your printer diagram (page 25)
Fig. 12 · Maintaining your printer

About tab to find printer software version and copyright information.

Options tab to enable/disable various printer software functions, such as Sound Effects and Buffer Mode.

DOS Printing DOS Printing DOS Printing DOS Printing tab to change settings for DOS printing.

  • 21 21 21 21

Maintaining your printer

Page 26 of the Lexmark Z53 user manual — Installing or replacing print cartridges
Page 26 · click to enlarge
Page 26

Installing or replacing print cartridges Installing or replacing print cartridges Installing or replacing print cartridges Installing or replacing print cartridges

1 Make sure the Power light is On.

2 Raise the front cover. The print cartridge carrier moves to the loading position unless the printer is busy.

Lexmark Z53 — Installing or replacing print cartridges diagram (page 26)
Fig. 13 · Installing or replacing print cartridges

Print cartridge carrier in the loading position

3 Remove the old print cartridge. Store or dispose of the old cartridge.

4 Install the replacement cartridge in the printer:

If you are installing a new cartridge, remove only the sticker and transparent tape from the bottom of the print cartridge. Warning: DO NOT touch the gold contact area on the print cartridge.

Insert the replacement print cartridge into the print cartridge carrier.

Push back firmly on the cartridge until it snaps securely into place.

Power light · Paper Feed light · Front cover

Page 27 of the Lexmark Z53 user manual — Improving print quality Improving print quality Improving print quality Improving print quality
Page 27 · click to enlarge
Page 27

5 From the Control Program’s Cartridges tab, select Install/Change Cartridge Install/Change Cartridge Install/Change Cartridge Install/Change Cartridge. For help, see page 21. Select the cartridge type you installed and click OK.

Lexmark Z53 — Improving print quality diagram (page 27)
Fig. 14 · Improving print quality

Maintaining your printer

6 If you installed a new cartridge, the Alignment dialog box displays. Follow the instructions on the Alignment screen to complete the cartridge installation. For help, see page 24.

Improving print quality Improving print quality Improving print quality Improving print quality

If the print quality is not satisfactory, a simple cartridge alignment may improve print quality. If print quality still is not satisfactory after aligning the print cartridges, you may need to clean the print nozzles.

  • Maintaining your printer 23 23 23 23
Page 28 of the Lexmark Z53 user manual — Aligning print cartridges Aligning print cartridges Aligning print cartridges Aligning print cartridges
Page 28 · click to enlarge
Page 28

Aligning print cartridges Aligning print cartridges Aligning print cartridges Aligning print cartridges

1 Load plain paper in the printer. 2 From the Control Program’s Cartridges tab, select Align Cartridges. For help, see page 21. Your printer prints an alignment test page and the Align Cartridge dialog box displays. The test page that prints has several alignment patterns, depending on the cartridge combination installed. Each pattern has a number under it. The test page that prints is similar to the one shown:

Lexmark Z53 — Aligning print cartridges Aligning print cartridges Aligning print cartridges Aligning print cartridges diagram (page 28)
Fig. 15 · Aligning print cartridges Aligning print cartridges…

3 From each alignment group on the test page, find the number under the alignment pattern that comes closest to forming a perfectly straight line. For example, in sample group A, the arrow points to the pattern that comes closest to forming a straight line. 4 In the Align Cartridges dialog box, enter the pattern numbers from the printed test page that come closest to forming a straight line. 5 After you have entered a number for all of the patterns, click OK.

Page 29 of the Lexmark Z53 user manual — Maintaining your printer
Page 29 · click to enlarge
Page 29

Cleaning print nozzles Cleaning print nozzles Cleaning print nozzles Cleaning print nozzles

1 Load plain paper in the printer. 2 From the Control Program’s Cartridges tab, select Clean Print Nozzles Print Nozzles Print Nozzles Print Nozzles. For help, see page 21. The printer feeds a sheet of paper and prints a nozzle test pattern, similar to the one shown:

Maintaining your printer

Cyan, magenta, yellow, and black purge lines (shown here in black and white) print when ink is forced through the print nozzles. If any of these colors do not print, you may need to replace your print cartridge.

Broken lines at the top of the page indicate clogged nozzles.

Unbroken lines at the bottom of the page indicate the nozzles were cleaned.

3 Compare the diagonal line above the printed bars to the diagonal line below the printed bars. Look for a break in the diagonal lines above the printed bars. A broken line indicates clogged nozzles. If the bottom line still has breaks, run the test up to two more times.

  • If the print quality is satisfactory after running the test three times, the print nozzles are clean. You do not need to complete the remaining steps.
  • If the print quality of both lines is not satisfactory after running the test three times, continue with step 4. 4 Remove and reinstall the print cartridges.
  • Maintaining your printer 25 25 25 25
Page 30 of the Lexmark Z53 user manual — Preserving print cartridges Preserving print cartridges Preserving print cartridges Preserving print cartridges
Page 30 · click to enlarge
Page 30

5 Repeat the nozzle test. 6 If the lines are still broken, wipe the print cartridge nozzles. For help, see the next section.

Wiping print nozzles Wiping print nozzles Wiping print nozzles Wiping print nozzles

If print quality does not improve after cleaning the print nozzles (see page 25), there may be dried ink on the print cartridge nozzles. For help on wiping the print nozzles, see the Troubleshooting: Print Quality section of the printer driver Help.

Preserving print cartridges Preserving print cartridges Preserving print cartridges Preserving print cartridges

To ensure the longest life from your print cartridge and optimum performance from your printer:

  • Keep a new print cartridge in its packaging until you are ready to install it.
  • Do not remove a print cartridge from the printer except to replace, clean, or store it in an air-tight container. The print cartridge does not print correctly if removed from the printer and left exposed for an extended period of time.
  • If a print cartridge runs out of ink, leave the empty cartridge in the printer until you are ready to replace it. Printing with one of the print cartridge carriers empty may cause printer problems.

Lexmark’s printer warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the printer. For best results, use Lexmark supplies.

Page 31 of the Lexmark Z53 user manual — Troubleshooting
Page 31 · click to enlarge
Page 31
Lexmark Z53 — Troubleshooting diagram (page 31)
Fig. 16 · Troubleshooting

Troubleshooting

Troubleshooting

Printer prints Printer prints Printer prints Printer prints slowly or slowly or slowly or slowly or doesn’t print doesn’t print doesn’t print doesn’t print (see page 28 page 28 page 28 page 28)

This section lists printer problems, and what you can do to solve them. From the list of printing problems in the left margin, select a category that describes your printing problem. Read the category for help finding the solution.

When your printer has a problem, first make sure that:

Paper misfeeds or Paper misfeeds or Paper misfeeds or Paper misfeeds or jams (see page 30 (see page 30 (see page 30 (see page 30)

  • The power supply is plugged into the printer and a properly grounded electrical outlet.
  • The printer is turned On.
  • If you are using a parallel cable, make sure it is an IEEE 1284-compliant parallel cable that supports bidirectional printing.

Document prints with prints with prints with prints with mistakes or mistakes or mistakes or mistakes or poor quality poor quality poor quality poor quality (see page 31 page 31 page 31 page 31)

  • Two-way communications is NOT disabled in your printer software.

Problems with Problems with Problems with Problems with transparencies, photos, envelopes... (see page 33) (see page 33) (see page 33) (see page 33)

1 From the printer’s Control Program Control Program Control Program Control Program, click the Options tab.

2 Make sure Disable Printer to PC Disable Printer to PC Disable Printer to PC Disable Printer to PC Communications is not checked.

Error messages Error messages Error messages Error messages and flashing lights and flashing lights and flashing lights and flashing lights (see page 34 (see page 34 (see page 34 (see page 34)

  • 27 27 27 27

Troubleshooting

Page 32 of the Lexmark Z53 user manual — Printer ejects a blank page after appearing to print
Page 32 · click to enlarge
Page 32

Printer prints slowly or doesn’t print Printer prints slowly or doesn’t print Printer prints slowly or doesn’t print Printer prints slowly or doesn’t print

If your printer does not print, your printer and your computer may not be able to communicate properly.

The following events also indicate two-way communications problems:

  • A message displays on your computer screen indicating your printer cannot establish bidirectional communications with your computer.
  • Print cartridge ink level indicators on the Status or Cartridges tabs of the printer’s Control Program are shaded.
  • Error messages (such as Paper Out) and job progress information do not display on your computer screen.

Before proceeding, verify that:

  • The parallel, or USB, cable is securely attached to both the printer and the personal computer.
  • The printer is plugged in and turned On.
  • Your printer port is set to an LPTn port for a parallel cable, and to a USB port for a USB cable.

If you have a switch box or other device (such as a scanner or fax) connected to the computer's parallel port, make sure it supports bidirectional communication. You may need to disconnect your printer from the switch box or other device and connect it directly to your computer.

Printer ejects a blank page after appearing to print

Make sure:

  • You have removed the sticker and transparent tape from the bottom of the print cartridges. For help, see page 22.
  • You have selected your Lexmark printer driver as the default printer.
Page 33 of the Lexmark Z53 user manual — Printer prints very slowly
Page 33 · click to enlarge
Page 33

Printer is plugged in but doesn’t print, or you get a Printer Offline message

Make sure:

  • The printer is turned On, and has paper loaded correctly.
  • The parallel, or USB, cable is completely plugged into the printer .
  • The printer is not being held or paused. To check the printer status:

Troubleshooting

1 From the Printers folder, double-click the Lexmark Z53 icon Z53 icon Z53 icon Z53 icon.

2 Click the Printer menu and make sure no check mark appears next to the Pause Printing Pause Printing Pause Printing Pause Printing option. Print a test page. If the test page prints, the printer is functioning properly. Check your application.

Test page does not print

Make sure:

  • Your print cartridges are properly installed. For help, see page 22.
  • Your cable is correct and not damaged. If you are using a parallel cable, make sure it is an IEEE 1284-compliant parallel cable that supports bidirectional printing.

Printer prints very slowly

If you are printing photos or your document contains graphics, it may take longer to print than regular text.

  • Close any open applications.
  • Decrease the Print Quality setting.
  • Consider purchasing more memory, or increasing the virtual memory for your computer.
  • Troubleshooting 29 29 29 29
Page 34 of the Lexmark Z53 user manual — Printer has a paper jam
Page 34 · click to enlarge
Page 34

Paper misfeeds or jams Paper misfeeds or jams Paper misfeeds or jams Paper misfeeds or jams

Paper misfeeds or pulls multiple sheets while moving through the printer

Make sure:

  • You are using a paper recommended for inkjet printers.
  • You do not force the paper down into the printer when you load it. Align the top of the paper with the paper alignment guides on the paper support.
  • You do not load too much paper in the sheet feeder. Depending on the thickness of your paper, the sheet feeder can hold up to 100 sheets of paper.
  • The left paper guide is against the side of the paper and it does not cause the paper to bow in the sheet feeder.
  • The printer is on a flat, level surface.

Printer does not feed envelopes or specialty papers

If regular paper feeds without problems, make sure:

  • You are loading the envelopes correctly. For help, see “Loading specialty papers” on page 3.
  • You are using an envelope size supported by your printer, and it is selected in Printer Properties.
  • Your application is designed to print envelopes. Check the user’s documentation that came with your application.

Printer has a paper jam

Try removing the paper from the sheet feeder. If the paper is lodged too far into the printer and can’t be removed:

1 Press the Power button to turn the printer Off.

Page 35 of the Lexmark Z53 user manual — Printed pages have alternating bands of light and dark print (intermittent printing)
Page 35 · click to enlarge
Page 35

2 Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer, raise the front cover and pull the paper out. 3 Close the front cover. 4 Press the Power button to turn the printer On. 5 Resend your document to print.

Troubleshooting

Document prints with mistakes or poor quality Document prints with mistakes or poor quality Document prints with mistakes or poor quality Document prints with mistakes or poor quality

Vertical straight lines are not smooth

To improve the print quality of vertical straight lines in tables, borders, and graphs:

  • Select a higher Print Quality setting.
  • Test the cartridge alignment. For help, see page 24.
  • Clean the print nozzles. For help, see page 25.

Characters are missing or unexpected

  • Make sure your Lexmark printer driver is selected as the default printer.
  • Your printer may have two-way communication problems. For help, see page 28.

Printed pages have alternating bands of light and dark print (intermittent printing)

  • Make sure Enable Buffer Mode is selected on the Options tab of the Control Program.
  • Select High (1200 x 1200 dpi) or Maximum (2400 x1200 dpi) Print Quality on the Document/Quality tab of Printer Properties.
  • Your printer may have two-way communications problems. For help, see page 28.
  • Troubleshooting 31 31 31 31
Page 36 of the Lexmark Z53 user manual — Colors on the printout differ from the colors on the screen
Page 36 · click to enlarge
Page 36

Print is too dark or smudged

Make sure:

  • You let the ink dry before handling the paper.
  • The Paper Type setting in the Printer Properties matches the paper type loaded in the printer.
  • The paper is straight and unwrinkled.
  • The Print Quality setting is appropriate for the paper type. If you are printing on regular paper, select Draft (300 x 600 dpi).
  • You may need to clean the print nozzles. For help, see page 25.

Print quality is poor at the left, right, top, or bottom edge of page

Like other printers, your printer cannot print in the extreme left, right, top, or bottom edges of a page. Use these minimum settings:

  • Left and right margins:

6.35 mm (0.25 in.) each for all paper sizes except A4.

For A4 size paper- 3.37 mm (0.133 in.) each. • Top and bottom margins:

Top - 1.7 mm (0.067 in.).

Bottom - 12.7 mm (0.5 in.).

Colors on the printout differ from the colors on the screen

  • An ink cartridge may be out of ink or low on ink. Check the ink level graphic on the Cartridges tab of your printer’s Control Program.
  • From the Document/Quality tab of Printer Properties, select Natural Color as the Document Type.
Page 37 of the Lexmark Z53 user manual — Transparencies or photos contain white lines
Page 37 · click to enlarge
Page 37
  • Use a different brand of paper. Every paper brand accepts ink differently and prints with slight color variations.
  • Remove any extra devices such as a scanner, and connect the printer to the parallel port.

Colors on the printout are faded

Troubleshooting

  • Your print cartridge may be low on ink. Check the ink level graphic on the Cartridges tab of your printer’s Control Program.
  • Clean the print nozzles. For help, see page 25.
  • If the colors still seem faded, wipe the print nozzles and contacts. For help, see the Troubleshooting: Print Quality section of the printer driver Help.

Problems with transparencies, photos, envelopes... Problems with transparencies, photos, envelopes... Problems with transparencies, photos, envelopes... Problems with transparencies, photos, envelopes...

Glossy photo papers or transparencies stick together

  • Remove the photos or transparencies from the paper exit tray as they exit the printer.
  • Let the photos or transparencies dry completely before stacking.
  • Use a transparency or photo paper designed for an inkjet printer.

Transparencies or photos contain white lines

  • From the Printer Properties, select High (1200 x 1200 dpi) or Maximum (2400 x 1200 dpi).
  • Your print nozzles may need cleaning. For help, see page 25.
  • Troubleshooting 33 33 33 33
Page 38 of the Lexmark Z53 user manual — The Power light blinks twice
Page 38 · click to enlarge
Page 38

Printer does not feed envelopes or specialty papers

For help, see "Printer does not feed envelopes or specialty papers"on page 30.

Error messages and flashing lights Error messages and flashing lights Error messages and flashing lights Error messages and flashing lights

Paper Jam message

For help, see "Printer has a paper jam"on page 30.

Ink Low message

The print cartridge is running out of ink. Purchase a new print cartridge.

The Power light is On and the Paper Feed light is blinking

  • If the printer is out of paper:

1 Load paper.

2 Press the Paper Feed button. • If the printer has a paper jam, see page 30 for help.

The Power light blinks twice

The print cartridge carrier has stalled. Check your screen for any error messages.

1 Turn the printer Off. 2 Wait a few seconds and turn the printer back On.

Power light · Paper Feed light

Page 39 of the Lexmark Z53 user manual — Appendix
Page 39 · click to enlarge
Page 39

Appendix

Statement of Statement of Statement of Statement of limited warranty limited warranty limited warranty limited warranty

In this section, you can find information about:

  • Conforms to Lexmark’s official published specifications, and

Appendix

  • Printing from DOS

Lexmark International, Lexmark International, Lexmark International, Lexmark International, Inc., Lexington, KY Inc., Lexington, KY Inc., Lexington, KY Inc., Lexington, KY

  • Is in good working order.
  • Warranty

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement page (at Lexmark’s option) without charge.

  • Notices

This warranty applies to the United States and Canada. For customers outside the U.S. and Canada, refer to the country- specific warranty information that came with your printer.

Printing from DOS Printing from DOS Printing from DOS Printing from DOS

To open your printer online Help system and find information on printing from DOS:

1 Open the Printer Properties (for help, see page 5), or the Control Program (for help, see page 21).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was designed. To obtain warranty service, you may be required to present the feature or option with the product.

Lexmark Z53 Color Jetprinter ™

This Statement of Limited Warranty applies to this product if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this statement as “Remarketer.”

2 Click the Help button in the lower-right corner of the software screen.

3 At the top of the Help screen, click Help Contents.

  • If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

4 Scroll down the screen to How to

Warranty

Lexmark warrants that this product:

5 From the How to... topics, click Print from Windows Print from Windows Print from Windows Print from Windows and DOS applications and DOS applications and DOS applications and DOS applications.

  • Is manufactured from new parts, or new and serviceable used parts, which perform like new parts,

Warranty Service Warranty Service Warranty Service Warranty Service

  • Is free from defects in material and workmanship,

The warranty period is 12 months and starts on the date of original purchase as shown on the purchase receipt.

Appendix 35

Page 40 of the Lexmark Z53 user manual — Appendix
Page 40 · click to enlarge
Page 40

Extent of Warranty Extent of Warranty Extent of Warranty Extent of Warranty

To obtain warranty service you may be required to present proof of original purchase. Warranty service will be provided at a Remarketer or a Lexmark designated location. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location.

this Statement of Limited Warranty, you may recover actual damages up to the limit set forth in the following paragraph.

We do not warrant uninterrupted or error-free operation of a product.

Warranty service does not include repair of failures caused by:

Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1) $5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

  • modification or attachments
  • accidents or misuse
  • unsuitable physical or operating environment
  • maintenance by anyone other than Lexmark or a Lexmark authorized servicer

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product.

  • operation of a product beyond the limit of its duty cycle
  • failure to have installed a maintenance kit as specified (if applicable)
  • use of printing media outside of Lexmark specifications

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligations and restrictions.

  • use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and ribbons)

This limitation of remedies also applies to any developer of materials supplied to Lexmark. Lexmark’s and the developer’s limitations of remedies are not cumulative. Such developer is an intended beneficiary of this limitation.

  • use of other than Lexmark product or component

ALL EXPRESS AND IMPLIED ALL EXPRESS AND IMPLIED ALL EXPRESS AND IMPLIED ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES, INCLUDING THE WARRANTIES, INCLUDING THE WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF MERCHANTABILITY AND MERCHANTABILITY AND MERCHANTABILITY AND MERCHANTABILITY AND FITNESS FOR A PARTICULAR FITNESS FOR A PARTICULAR FITNESS FOR A PARTICULAR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN PURPOSE, ARE LIMITED IN PURPOSE, ARE LIMITED IN PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY DURATION TO THE WARRANTY DURATION TO THE WARRANTY DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, PERIOD. NO WARRANTIES, PERIOD. NO WARRANTIES, PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL EXPRESS OR IMPLIED, WILL EXPRESS OR IMPLIED, WILL EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. APPLY AFTER THIS PERIOD. APPLY AFTER THIS PERIOD. APPLY AFTER THIS PERIOD.

Before you present this product for warranty service, remove all programs, data, and removable storage media.

Additional Rights Additional Rights Additional Rights Additional Rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-800-539-6275, or on the World Wide Web at www.lexmark.com

Limitation of Liability Limitation of Liability Limitation of Liability Limitation of Liability

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Free remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may only be available for a fee.

Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under

  • 36 36 36 36
Page 41 of the Lexmark Z53 user manual — Appendix
Page 41 · click to enlarge
Page 41

Electronic emission Electronic emission Electronic emission Electronic emission notices

Industry Canada Industry Canada Industry Canada Industry Canada Compliance Statement Compliance Statement Compliance Statement Compliance Statement

  • Increase the separation between the equipment and receiver.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Federal Communications Commission (FCC) Commission (FCC) Commission (FCC) Commission (FCC) Compliance Information Compliance Information Compliance Information Compliance Information Statement

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

Avis de conformité aux Avis de conformité aux Avis de conformité aux Avis de conformité aux normes d’Industrie normes d’Industrie normes d’Industrie normes d’Industrie Canada

The Lexmark Z53 Color Jetprinter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Appendix

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment. Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1329605 for parallel attach or 43H5856 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.

European Community European Community European Community European Community (EC) Directives (EC) Directives (EC) Directives (EC) Directives Conformity

This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

A declaration of conformity with the requirements of the Directive has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France.

Any questions regarding this compliance information statement should be directed to:

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Director of Lab Operations Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000

  • Reorient or relocate the receiving antenna.

Appendix 37

Page 42 of the Lexmark Z53 user manual — Energy star
Page 42 · click to enlarge
Page 42

Power supply Power supply Power supply Power supply

If your power supply fails, replace it with the Lexmark replacement part or other UL LISTED Direct Plug-In Power Unit marked “Class 2” and rated 30 Vdc at 1A.

The United Kingdom The United Kingdom The United Kingdom The United Kingdom Telecommunications Act Telecommunications Act Telecommunications Act Telecommunications Act 1984

Safety information Safety information Safety information Safety information

This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom.

  • If your product is NOT marked

with this symbol , it MUST be connected to an electrical outlet that is properly grounded.

  • The power cord must be connected to an electrical outlet that is near the product and easily accessible.

Energy star Energy star Energy star Energy star

  • Refer service or repairs, other than those described in the operating instructions, to a professional service person.
  • This product is designed, tested and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.

The EPA ENERGY STAR Computers program is a partnership effort with computer manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation.

Companies participating in this program introduce personal computers, printers, monitors, or fax machines that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program.

As an Energy Star Partner, Lexmark International, Inc. has determined that this product meets the Energy Star guidelines for energy efficiency.

  • 38 38 38 38

Japanese VCCI Notice

Page 46 of the Lexmark Z53 user manual — Index
Page 46 · click to enlarge
Page 46
  • 42 42 42 42
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark Z53

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark Z53

Be the first to ask — other owners or our team will answer.

Original document

Lexmark Z53 manual PDF

46 pages·891 KB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…