EN
Lexmark logo
Official user manual

Lexmark Z35

24 pages·788 KB·Printer·PDF·ENDEFRITNLJA
Lexmark Z35
Table of Contents 26 sections Z25, Z35 Color Jetprinter ™ · January 2002 · www.lexmark.com · Contents · … ShowHide
Page 1 of the Lexmark Z35 user manual — www.lexmark.com
Page 1 · click to enlarge
Page 1

Z25, Z35 Color Jetprinter ™

for Windows 98, Windows Me, Windows 2000, Windows XP, Mac OS 8.6 to 9.2, and Mac OS X version 10.0.3 to 10.1

January 2002

www.lexmark.com

Page 2 of the Lexmark Z35 user manual — Z25, Z35 Color Jetprinter ™
Page 2 · click to enlarge
Page 2

Edition: January 2002 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553- 9727. In the United Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. Apple, Mac OS, and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and other countries.

Other trademarks are the property of their respective owners. © Copyright 2002 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550. Federal Communications Commission (FCC) compliance information statement The Lexmark Z25 Color Jetprinter, Type 4105-005, and Lexmark Z35 Color Jetprinter, Type 4105-005, have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

equipment. NoteTo assure compliance with FCC regulations on

electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 12A2405 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations. Any questions regarding this compliance information statement should be directed to: Director of Lab Operations, Lexmark International, Inc., 740 West New Circle Road, Lexington, KY 40550, (859) 232-3000. European Community (EC) directives conformity This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. ENERGY STAR The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce products that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Safety information

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions. The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this
  • Use only the Lexmark power supply provided with this product or an authorized Lexmark replacement power supply.
  • Connect the power cord to an electrical outlet that is near the product and easily accessible.
  • Refer service or repairs, other than those described in the manual, to a professional service person.
Page 4 of the Lexmark Z35 user manual — Step 1: Make sure your
Page 4 · click to enlarge
Page 4

Step 1: Make sure your

Step 2: Check the printer parts

computer is on

Lexmark Z35 — Step 1: Make sure your diagram (page 4)
Fig. 1 · Step 1: Make sure your
Lexmark Z35 — Step 1: Make sure your diagram (page 4)
Fig. 2 · Step 1: Make sure your

Black print cartridge (P/N 10N0217 or P/N 10N0016) comes with the Lexmark™ Z35 Color Jetprinter™ and some Lexmark Z25 printers

From Setup to Printing booklet

Color print cartridge (P/N 10N0227 or P/N 10N0026)

Windows 98 Windows Me Windows 2000 Windows XP

Mac OS 8.6 to 9.2 Mac OS X version 10.0.3 to 10.1

If any items are missing, contact Lexmark (see page 18).

Show 4 more labels / short text on this page
Lexmark printer · Power supply · Power supply cord · Printer software CD
Page 5 of the Lexmark Z35 user manual — Setup
Page 5 · click to enlarge
Page 5

Step 3: Connect the power

Step 4: Connect the USB

supply

cable

Lexmark Z35 — Step 3: Connect the power diagram (page 5)
Fig. 3 · Step 3: Connect the power
Lexmark Z35 — Step 3: Connect the power diagram (page 5)
Fig. 4 · Step 3: Connect the power

Setup

If the power light does not come on:

1 Check the power supply connections.

2 Press the power button.

Lexmark Z35 — Setup diagram (page 5)
Fig. 5 · Setup

on your computer may be different from the one shown. Look for this symbol:

Page 6 of the Lexmark Z35 user manual — cartridges
Page 6 · click to enlarge
Page 6

Step 5: Install the print

Lexmark Z35 — Step 5: Install the print diagram (page 6)
Fig. 6 · Step 5: Install the print

cartridges

4 Open the front cover.

Lexmark Z35 — cartridges diagram (page 6)
Fig. 7 · cartridges
Lexmark Z35 — cartridges diagram (page 6)
Fig. 8 · cartridges

position when you open the front cover.

Page 7 of the Lexmark Z35 user manual — Setup
Page 7 · click to enlarge
Page 7

You can print with:

Follow step 5, step 6, and step 7 for your printer.

  • Both a color cartridge (P/N 10N0227 or 10N0026) in the left carrier and a black cartridge (P/N 10N0217 or 10N0016) in the right carrier
Lexmark Z35 — Step 5: Install the print diagram (page 7)
Fig. 9 · Step 5: Install the print
  • Only a color cartridge (P/N 10N0227 or 10N0026) in the left carrier
  • Only a black cartridge (P/N 10N0217 or 10N0016) in the right carrier

Setup

If your printer came with two cartridges:

Lexmark Z35 — Setup diagram (page 7)
Fig. 10 · Setup
Page 8 of the Lexmark Z35 user manual — Step 6: Load up to 100 sheets
Page 8 · click to enlarge
Page 8

Step 6: Load up to 100 sheets

of plain paper 8 Close the front cover.

Lexmark Z35 — Step 6: Load up to 100 sheets diagram (page 8)
Fig. 11 · Step 6: Load up to 100 sheets

Make sure you fully extend the paper support and the paper exit tray. 1

Lexmark Z35 — Step 6: Load up to 100 sheets diagram (page 8)
Fig. 12 · Step 6: Load up to 100 sheets
Page 9 of the Lexmark Z35 user manual — Setup
Page 9 · click to enlarge
Page 9
Lexmark Z35 — Step 6: Load up to 100 sheets diagram (page 9)
Fig. 13 · Step 6: Load up to 100 sheets

2 To avoid paper jams, squeeze and slide the paper guide to the left edge of the paper.

Follow all of the steps for your operating system.

Operating system:Page: Windows 98/Me/2000 and Windows XP8 Mac OS 8.6 to 9.212 Mac OS X version 10.0.3 to 10.115

Setup

Printer software for other operating systems (such as Linux) may be available on the Lexmark Web site. For more information, see page 18. When you download the software, installation information is included in the Readme file.

of the paper support. Letter size paper should align with the top of the paper support.

If you are using your printer with a Lexmark adapter, refer to the adapter documentation to install the printer software.

Page 10 of the Lexmark Z35 user manual — Congratulations!
Page 10 · click to enlarge
Page 10

Windows

To install printer software for Mac OS 8.6 to 9.2, see page 12. To install printer software for Mac OS X version 10.0.3 to 10.1, see page 15.

different from the ones shown in this booklet, depending on your printer model and operating system. The arrows show you where to click.

3 Wait for the following Lexmark printer software installation screen to appear. If it does not appear, see page 10.

Lexmark Z35 — Windows diagram (page 10)
Fig. 14 · Windows

Click Cancel on any screens similar to the one shown.

Lexmark Z35 — Windows diagram (page 10)
Fig. 15 · Windows

Follow the instructions on your screen to complete software installation.

During installation, an alignment page prints. If it does not, see page 10.

Congratulations!

You have successfully set up your printer for Windows.

Page 11 of the Lexmark Z35 user manual — Windows
Page 11 · click to enlarge
Page 11

Printing from Windows

Lexmark Z35 — Printing from Windows diagram (page 11)
Fig. 16 · Printing from Windows

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

Lexmark Z35 — Printing from Windows diagram (page 11)
Fig. 17 · Printing from Windows

Basic printing is as easy as:

1 Load the paper. For help, see page 6.

2 Open the file you want to print.

3 Customize the printer settings in Print Properties.

a From your document, click File Print

I Want To menu

Properties or Preferences.

Windows

Windows 2000, click File Print. From the Printer Settings tab, click Change.

b To learn more:

– Explore the tabs and menus in Print Properties.

Use the I Want To menu as a guide for printing photographs, envelopes, iron-on transfers, and more.

– Click Help to view the printer software Help.

c Customize the settings for your document.

d Click OK to apply the settings and close Print

Properties.

4 Print your document.

Printer software Help

Page 12 of the Lexmark Z35 user manual — Need help during Windows setup?
Page 12 · click to enlarge
Page 12

Need help during Windows setup?

The Lexmark Solution Center is your complete guide to:

  • Printing photos, envelopes, banners, or other special documents

The installation screen did not appear.

  • Solving printing problems

1 Make sure you click Cancel on any screens similar to the one in step 1 on page 8.

  • Ordering, installing, and maintaining cartridges
  • Contacting Lexmark

2 Make sure the Lexmark printer software CD is in your CD-ROM drive.

To open the Lexmark Solution Center:

From your desktop, double-click the Lexmark Z25-Z35 Solution Center icon, or click Start Programs or All Programs Lexmark Z25-Z35 Lexmark Z25-Z35 Solution Center.

3 From the desktop, double-click My Computer.

4 Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.

5 Continue with step 3 on page 8.

The alignment page did not print.

Lexmark Z35 — Need help during Windows setup? diagram (page 12)
Fig. 18 · Need help during Windows setup?
  • Make sure you installed the print cartridges correctly (see page 4).
  • Follow the instructions on any error message on your screen. Click the ? on the error message for help.

your printer model and the cartridges you installed.

Printer software Help

Page 13 of the Lexmark Z35 user manual — Windows
Page 13 · click to enlarge
Page 13

The printer is not working.

  • Check the printer port:

Try the following:

a From the File menu of a software application, click

Print or Printer Setup.

  • Check the printer status:

b In the Where area, make sure your printer port is

set to USB.

a From the Start menu, click Settings Printers.

  • Make sure you have not installed multiple copies of the printer software:

b From the Printers folder, double-click the

Lexmark Z25-Z35 printer icon.

a From the Start menu, click Settings Printers.

c From the Printer menu, make sure:

b In the Printers folder, make sure there is only one

– Default Printer is selected.

icon for your printer.

Windows

– Pause Printing is not selected.

If the printer port is wrong or multiple copies of the printer software are installed, uninstall and then reinstall the printer software:

a From the Start menu, click Control Panel

1 From the Start menu, click Programs or All Programs Lexmark Z25-Z35 Lexmark Z25-Z35 Uninstall.

Printers and Other Hardware.

b Click Printers and Faxes, and then click the

Lexmark Z25-Z35 printer icon.

2 Follow the instructions on your screen.

c From the Printer menu, make sure:

– Default Printer is selected.

printer software.

– Pause Printing is not selected.

3 To reinstall the printer software, see page 8.

  • If you have a device such as a scanner or fax machine, disconnect your printer from the device, and then connect the printer directly to your computer.

The paper feed light is blinking.

If there is an error message on your screen, follow the instructions on it. Click the ? on the error message for help.

Windows 98/Me/2000 · Windows XP

Page 14 of the Lexmark Z35 user manual — Congratulations!
Page 14 · click to enlarge
Page 14

3 Wait for the following Lexmark printer software installation screen to appear. If it does not appear, see page 14.

To install printer software for Windows, see page 8. To install printer software for Mac OS X version 10.0.3 to 10.1, see page 15.

Lexmark Z35 — Need help during Windows setup? diagram (page 14)
Fig. 19 · Need help during Windows setup?

Close all open software applications.

Follow the instructions on your screen to complete software installation.

During installation, an alignment page prints. If it does not, see page 14.

Congratulations!

You have successfully set up your printer for Mac OS 8.6 to 9.2.

Page 15 of the Lexmark Z35 user manual — Printing from Mac OS 8.6 to 9.2
Page 15 · click to enlarge
Page 15

Printing from Mac OS 8.6 to 9.2

2 Double-click the Lexmark Z25-Z35 Users Guide.pdf icon.

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

Lexmark Z35 — Printing from Mac OS 8.6 to 9.2 diagram (page 15)
Fig. 20 · Printing from Mac OS 8.6 to 9.2

Basic printing is as easy as:

1 Load the paper. For help, see page 6.

2 Open the file you want to print.

3 Customize the printer settings.

4 Print your document.

The Online User’s Guide for Mac OS 8.6 to 9.2 contains printing instructions and ideas, maintenance tips, and troubleshooting information. You will need Adobe Acrobat 4.0 or later to view your printer documentation. To open the Online User’s Guide:

3 From the left navigation area, click Printer overview to learn how to customize the printer settings using the printer software.

1 From your desktop, double-click the folder for your printer.

4 When you are finished, click File Quit.

Page 16 of the Lexmark Z35 user manual — Need help during Mac OS 8.6 to 9.2 setup?
Page 16 · click to enlarge
Page 16

Need help during Mac OS 8.6 to 9.2 setup?

The printer is not working.

  • Make sure your printer has been added to your system:

The installation screen did not appear.

a From the Apple menu, choose Chooser.

1 Make sure the Lexmark printer software CD is in your CD-ROM drive.

b Select your printer in the left window of Chooser.

If your printer is not in the left window of Chooser, install the printer software (see page 12).

2 From your desktop, double-click the Lexmark Z25-Z35 CD icon.

c Make sure the printer is displayed and selected in

3 From the CD folder, double-click the Install icon.

the right side of Chooser.

4 Continue with step 3 on page 12.

If it is not, check your USB cable connection and repeat step b and step c.

The alignment page did not print.

  • Make sure your printer is set as the default printer:
  • Make sure you installed the print cartridges correctly (see page 4).

a From your desktop, select the icon for your printer.

b From the menu bar, choose Printing.

  • Follow the instructions on any error message on your screen.

c Make sure Set Default Printer and Start Print

Queue are both selected.

  • For more information, refer to the Troubleshooting topic in the Online User’s Guide for Mac OS 8.6 to 9.2 . To open the Online User’s Guide , see page 13.

The paper feed light is blinking.

If there is an error message on your screen, follow the instructions on it.

Page 17 of the Lexmark Z35 user manual — Congratulations!
Page 17 · click to enlarge
Page 17

Mac OS X version 10.0.3 to 10.1

Wait for the following Lexmark printer software installation screen to appear. If it does not appear, see page 17.

To install the printer software for Windows, see page 8. To install the printer software for Mac OS 8.6 to 9.2, see page 12.

Lexmark Z35 — Mac OS X version 10.0.3 to 10.1 diagram (page 17)
Fig. 21 · Mac OS X version 10.0.3 to 10.1

Close all open software applications.

Follow the instructions on your screen to complete software installation.

From your desktop, double-click the Lexmark Z25-Z35 CD icon.

During installation, an alignment page prints. If it does not, see page 17.

From the CD folder, double-click the Install icon.

Congratulations!

You have successfully set up your printer for Mac OS X version 10.0.3 to 10.1.

Page 18 of the Lexmark Z35 user manual — Printing from Mac OS X version 10.0.3 to 10.1
Page 18 · click to enlarge
Page 18

Printing from Mac OS X version 10.0.3 to 10.1

3 Double-click the Lexmark Z25-Z35 Users Guide.pdf icon.

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

Lexmark Z35 — Printing from Mac OS X version 10.0.3 to 10.1 diagram (page 18)
Fig. 22 · Printing from Mac OS X version 10.0.3 to 10.1

Basic printing is as easy as:

1 Load the paper. For help, see page 6.

2 Open the file you want to print.

3 Customize the printer settings.

4 Print your document.

The Online User’s Guide for Mac OS X 10.0.3 to 10.1 contains printing instructions and ideas, maintenance tips, and troubleshooting information. You will need Adobe Acrobat 4.0 or later to view your printer documentation. To open the Online User’s Guide:

4 From the left navigation area, click Printer overview to learn how to customize the printer settings using the printer software.

1 From the Dock, click the Finder icon.

5 When you are finished, click File Quit.

2 Click Computer, and then double-click the OS X disk icon Library folder Printers folder Lexmark folder.

Page 19 of the Lexmark Z35 user manual — Need help during Mac OS X version 10.0.3 to 10.1 setup?
Page 19 · click to enlarge
Page 19

Need help during Mac OS X version 10.0.3 to 10.1 setup?

The printer is not working.

First, check your USB cable connection. Then:

1 From the Dock, click the Finder icon.

The installation screen did not appear.

2 From the Finder window, click Applications in the tool bar.

1 Make sure the Lexmark printer software CD is in your CD-ROM drive.

3 Double-click the Utilities folder.

2 From your desktop, double-click the Lexmark Z25-Z35 CD icon.

4 Double-click the Print Center icon.

3 From the CD folder, double-click the Install icon.

5 Select your printer in the Printer List. If necessary, click View Printer List to open the Printer List.

4 Continue with step 5 on page 15.

If your printer is not listed in the Printer List:

The alignment page did not print.

a Click Add Printer.

b From the pop-up menu, choose USB.

  • Make sure you installed the print cartridges correctly (see page 4).

c Select your printer, and then click Add.

  • Follow the instructions on any error message on your screen.

If your printer is not listed as a USB printer, install the printer software (see page 15).

  • For more information, refer to the Troubleshooting topic in the Online User’s Guide for Mac OS X 10.0.3 to 10.1 . To open the Online User’s Guide , see page 16.

6 From the Printers menu, choose Make Default.

7 From the Printers menu, choose Show Queue.

8 From the Queue menu:

a Choose Start Queue, if available.

The paper feed light is blinking.

b Select your print job, and then choose Retry or

If there is an error message on your screen, follow the instructions on it.

Resume, if available.

Page 20 of the Lexmark Z35 user manual — Contacting Lexmark
Page 20 · click to enlarge
Page 20

Contacting Lexmark

Visit our Web site at www.lexmark.com to:

  • Receive technical support.
  • Register your printer.
  • Access documentation for your printer.
  • Check for free offers.

See the table for other ways to contact Lexmark.

Mac OS X version 10.0.3 to 10.1

For a list of phone numbers: 1 Insert the printer software CD into your CD-ROM drive. 2 Click Contact Lexmark Technical Support.

1 Insert the printer software CD into your CD- ROM drive. 2 Click Contact Lexmark.

1 Insert the printer software CD into your CD-ROM drive. 2 From your desktop, double- click the Lexmark Z25-Z35 CD icon. 3 From the CD folder, double- click the Install icon. 4 Click Contact Lexmark.

To access customer support information from our Web site: 1 Open the Lexmark Solution Center (see page 10). 2 Click Contact Information Customer Support.

1 From your desktop, double-click your printer folder. 2 Double- click Technical Support.

1 From the Finder, click Computer, and then double-click the OS X disk icon Library folder Printers folder Lexmark folder. 2 Double-click the Lexmark Z25-Z35 Utility icon. 3 Click Contacting Lexmark.

Windows

Page 22 of the Lexmark Z35 user manual — Index
Page 22 · click to enlarge
Page 22
Page 22 of the Lexmark Z35 user manual — Index
Page 23 of the Lexmark Z35 user manual — Index
Page 23 · click to enlarge
Page 23

Statement of Limited Warranty Lexmark International, Inc. Lexington, KY This limited warranty applies to the United States. For customers outside the U.S., refer to the country-specific warranty information that came with your product. This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this statement as “Remarketer.” Limited warranty Lexmark warrants that this product:

if the product is not free of all legal obligations, restrictions, liens, and encumbrances. Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark). For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, contact Lexmark at (407) 563-4600, or on the World Wide Web at www.lexmark.com Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee. Extent of limited warranty We do not warrant uninterrupted or error-free operation of any product. Warranty service does not include repair of failures caused by:

Limitation of liability Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation. Additional rights Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you. This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state. Japanese VCCI notice

  • Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
  • Is, during normal use, free from defects in material and workmanship If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option). If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was designed. To obtain warranty service, you may be required to present the feature or option with the product. If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user. Limited warranty service The warranty period starts on the date of original purchase as shown on the purchase receipt. The warranty period ends 12 months later. To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or
  • Modification or attachments
  • Accidents or misuse
  • Unsuitable physical or operating environment
  • Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
  • Operation of a product beyond the limit of its duty cycle
  • Use of printing media outside of Lexmark specifications
  • Supplies (such as ink) not furnished by Lexmark
  • Products, components, parts, materials, software, or interfaces not furnished by Lexmark TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

The United Kingdom Telecommunications Act 1984 This apparatus is approved under the approval number NS/ G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom. Industry Canada compliance statement This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis de conformité aux normes d’Industrie Canada Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Page 24 of the Lexmark Z35 user manual — www.lexmark.com
Page 24 · click to enlarge
Page 24

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. Other trademarks are the property of their respective owners. © 2002 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550

www.lexmark.com

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark Z35

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark Z35

Be the first to ask — other owners or our team will answer.

Original document

Lexmark Z35 manual PDF

24 pages·788 KB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…