EN
Lexmark logo
Official user manual

Lexmark Z33

20 pages·922 KB·Printer·PDF·ENDEFRITNLJA
Lexmark Z33
Table of Contents 24 sections Z13 Color Jetprinter™ · Z23 Color Jetprinter · Z33 Color Jetprinter · April 2001 · … ShowHide
Page 1 of the Lexmark Z33 user manual — www.lexmark.com
Page 1 · click to enlarge
Page 1

Z13 Color Jetprinter™

Z23 Color Jetprinter

Z33 Color Jetprinter

for Windows 98, Windows Me, Windows 2000, Mac OS 8.6 to 9.1, and Mac OS X

April 2001

www.lexmark.com

Page 2 of the Lexmark Z33 user manual — Z13 Color Jetprinter™
Page 2 · click to enlarge
Page 2

Edition: April 2001 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. Mac OS and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and other countries. Other trademarks are the property of their respective owners. © Copyright 2001 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550.

FCC emissions information The Lexmark Z13 Color Jetprinter, Type 4104; Lexmark Z23 Color Jetprinter, Type 4105; and Lexmark Z33 Color Jetprinter, Type 4105, have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any questions regarding this compliance information statement should be directed to: Director of Lab Operations Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 Please refer to the online information for details. Safety information

  • Use only the Lexmark power supply provided with this product or an authorized Lexmark replacement power supply.
  • Connect the power cord to an electrical outlet that is near the product and easily accessible.
  • Refer service or repairs, other than those described in the manual, to a professional service person. ENERGY STAR The EPA ENERGY STAR Computers program is a partnership effort with computer manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce personal computers, printers, monitors, or fax machines that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Japanese VCCI notice
Page 3 of the Lexmark Z33 user manual — Setup
Page 3 · click to enlarge
Page 3

Step 1: Make sure your

computer is on

This booklet takes you step by step from setup through printing your first document using Windows 98, Windows Me, Windows 2000, Mac OS 8.6 to 9.1, or Mac OS X.

Setup

Printer software and documentation for other operating systems (such as Linux) may be available on the Lexmark Web site. (For more information, see page 17.) If your printer documentation includes an online User’s Guide, you will need Adobe Acrobat Reader 4.0x.

Lexmark Z33 — Setup diagram (page 3)
Fig. 1 · Setup

See page 17 for information about contacting Lexmark and locating your printer warranty.

Setup

For setup, you will need:

Windows 98 Windows Me Windows 2000

Mac OS 8.6 to 9.1 Mac OS X

  • A computer with a CD-ROM drive and USB port
  • A USB cable (such as Lexmark P/N 12A2405) purchased separately
  • Letter or A4 size paper

Follow the steps beginning on page 1 to set up your printer.

For additional help while setting up your printer, see:

  • Page 11 for Windows 98, Windows Me, or Windows 2000
  • Page 16 for Mac OS 8.6 to 9.1 or Mac OS X
Page 4 of the Lexmark Z33 user manual — Step 2: Check the printer parts
Page 4 · click to enlarge
Page 4

Step 2: Check the printer parts

Step 3: Connect the power

supply

Lexmark Z33 — Step 2: Check the printer parts diagram (page 4)
Fig. 2 · Step 2: Check the printer parts
Lexmark Z33 — Step 2: Check the printer parts diagram (page 4)
Fig. 3 · Step 2: Check the printer parts

Black print cartridge (P/N 10N0016) comes with the Lexmark™ Z33 Color Jetprinter™ only

From Setup to Printing booklet

Color print cartridge (P/N 10N0026)

If the Power light doesn’t come on:

1 Check the power supply connections.

Print cartridge storage unit comes with the Lexmark Z13 only

Lexmark Z33 — Step 2: Check the printer parts diagram (page 4)
Fig. 4 · Step 2: Check the printer parts

To install the print cartridge storage unit, refer to:

  • Windows: Printer software Help (see page 9)
  • Mac OS 8.6 to 9.1: User’s Guide (see page 13)
  • Mac OS X: Printer software Help (see page 15)

If any items are missing, contact Lexmark (see page 17).

Lexmark printer · Power supply · Power supply cord

Page 5 of the Lexmark Z33 user manual — Setup
Page 5 · click to enlarge
Page 5
Lexmark Z33 — Step 2: Check the printer parts diagram (page 5)
Fig. 5 · Step 2: Check the printer parts

Setup

If you own a:Your printer came with:You can print with: Lexmark Z13Color print cartridge (P/N 10N0026)• Only the color print cartridge • Only a black print cartridge* Lexmark Z23Color print cartridge (P/N 10N0026)• Both a color and a black print cartridge* • Only the color print cartridge in the left carrier • Only a black print cartridge* in the right carrier Lexmark Z33Color print cartridge (P/N 10N0026) Black print cartridge (P/N 10N0016)• Both the color and the black print cartridge • Only the color print cartridge in the left carrier • Only the black print cartridge in the right carrier * You can purchase a black print cartridge (P/N 10N0016) separately.
Lexmark Z33 — Setup diagram (page 5)
Fig. 6 · Setup
Lexmark Z33 — Setup diagram (page 5)
Fig. 7 · Setup
Page 6 of the Lexmark Z33 user manual — Step 2: Check the printer parts
Page 6 · click to enlarge
Page 6
Lexmark Z33 — Step 2: Check the printer parts diagram (page 6)
Fig. 8 · Step 2: Check the printer parts
Lexmark Z33 — Step 2: Check the printer parts diagram (page 6)
Fig. 9 · Step 2: Check the printer parts
Page 7 of the Lexmark Z33 user manual — Setup
Page 7 · click to enlarge
Page 7
Lexmark Z33 — Step 2: Check the printer parts diagram (page 7)
Fig. 10 · Step 2: Check the printer parts

Setup

To avoid paper misfeeds, slide the paper guide to the left side of the paper.

on your computer may be different from the one shown.

the top of the paper support. Letter size paper should align with the top of the paper support.

Page 8 of the Lexmark Z33 user manual — Step 7: Install the printer
Page 8 · click to enlarge
Page 8

Step 7: Install the printer

Windows

software

Now that you have set up your printer, you are ready to install the printer software.

to 9.1, see page 12. To install the printer software for Mac OS X, see page 14.

Follow all of the steps for your operating system.

Operating system:Page: Windows 98, Windows Me, and Windows 20006 Mac OS 8.6 to 9.112 Mac OS X14
Lexmark Z33 — Step 7: Install the printer diagram (page 8)
Fig. 11 · Step 7: Install the printer

Click Cancel on any screens similar to the one shown.

Printer software for other operating systems (such as Linux) may be available on the Lexmark Web site. (For more information, see page 17.) When you download the software, installation information is included in the readme file.

Cancel

Page 9 of the Lexmark Z33 user manual — Windows
Page 9 · click to enlarge
Page 9

Wait for the Lexmark printer software installation screen shown in step 4 to appear. If it doesn’t, see page 11.

Lexmark Z33 — Step 7: Install the printer diagram (page 9)
Fig. 12 · Step 7: Install the printer
Lexmark Z33 — Step 7: Install the printer diagram (page 9)
Fig. 13 · Step 7: Install the printer

Windows

  • Make sure you installed the print cartridges correctly (see page 3).
  • Follow the instructions on any error message on your screen. Click the ? on the error message for help.
Lexmark Z33 — Windows diagram (page 9)
Fig. 14 · Windows

Follow the instructions on the screen to enter alignment values using the page printed in step 6.

Page 10 of the Lexmark Z33 user manual — Using the printer software
Page 10 · click to enlarge
Page 10

Printing from Windows

Lexmark Z33 — Printing from Windows diagram (page 10)
Fig. 15 · Printing from Windows

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

Basic printing is as easy as:

1 Load the paper.

2 Open the file you want to print.

3 Customize the printer settings. For help, see the next section, “Using the printer software.”

4 Print your document.

Lexmark Z33 — Printing from Windows diagram (page 10)
Fig. 16 · Printing from Windows

Using the printer software

Use the Printer Properties (or Printing Preferences) to customize settings so your document prints the way you want it. You can open the Printer Properties from your software application.

For example, to print the first page of the Read Me file:

1 Load plain paper. For help, see page 5.

2 From the Start menu on your desktop, click Programs the name of your printer Read Me.

Continue · Finished

Page 11 of the Lexmark Z33 user manual — Windows
Page 11 · click to enlarge
Page 11

3 Customize the printer settings:

b From the Quality/Copies tab, select Quick Print to

print the Read Me file quickly.

a Windows 98 and Windows Me: From the Read

Me file, click File Print Properties.

Windows 2000: From the Read Me file, click File Print. From the Printer Settings tab, click Change.

results in better print quality, but your documents may take longer to print.

c To learn more:

Windows

– Explore the other tabs in the Printer Properties.

2000, follow the instructions for Windows 98 and Windows Me to open the Printing Preferences.

– Explore the menus. Use the I Want To menu as

a guide for printing photographs, envelopes, iron-on transfers, and more.

– Click Help to view the printer software Help.

From the File menu, click Exit when you are finished.

Lexmark Z33 — Windows diagram (page 11)
Fig. 17 · Windows

d Click OK to apply the settings and close the Printer

Properties.

4 Windows 98 and Windows Me: In the Pages area of the Print dialog box, type 1 in the From: and To: text boxes.

Windows 2000: On the General tab, type 1 in the Pages text box.

5 Click OK to print the first page of the Read Me file.

Help I Want To menu

6 From the File menu, click Exit to close the Read Me file.

Printer Properties · Printer software Help

Page 12 of the Lexmark Z33 user manual — Congratulations!
Page 12 · click to enlarge
Page 12

You can do more than customize your printer settings in the printer software. You can also use The Lexmark Solution Center as your complete guide to:

2 To learn more:

– Explore the tabs in the Lexmark Solution

Center.

  • Printer features, such as printing photos, envelopes, and banners

– Click Help to view the printer software Help.

From the File menu, click Exit when you are finished.

  • Solving printing problems (troubleshooting)
  • Ordering, installing, and maintaining supplies

3 Click Exit to close the Lexmark Solution Center.

  • Information about contacting Lexmark

Congratulations!

For example, to see how much ink is left in your cartridges:

You are finished setting up your printer for Windows.

1 From your desktop, double-click the Lexmark Solution Center icon.

your printer model and the cartridges you installed.

The Lexmark Solution Center

Lexmark Z33 — Congratulations! diagram (page 12)
Fig. 18 · Congratulations!

Ink levels · Help Exit

Page 13 of the Lexmark Z33 user manual — Windows
Page 13 · click to enlarge
Page 13

Need help during setup?

  • If you have a device such as a scanner or fax machine, disconnect your printer from the device and connect the printer directly to your computer.
  • Check the printer port:

The installation screen didn’t appear.

a From the File menu of a software application, click

Print or Printer Setup.

1 Make sure you click Cancel on any screens similar to the one in step 1 on page 6.

b In the Where area, make sure your printer port is

Windows

2 Make sure the Lexmark printer software CD is in your CD-ROM drive.

set to USB.

  • Make sure you have not installed multiple copies of the printer software:

3 From the desktop, double-click My Computer.

4 Double-click the CD-ROM drive icon.

a From the Start menu, click Settings Printers.

b In the Printers folder, make sure there is only one

5 If necessary, double-click setup.exe.

icon for your printer.

6 Continue with step 4 on page 7.

If there is still a problem, uninstall and then reinstall the printer software:

The printer isn’t working.

1 From the Start menu, click Programs the name of your printer Uninstall.

Try the following:

  • Check the printer status:

2 Follow the instructions on your screen.

a From the Start menu, click Settings Printers.

3 To reinstall the printer software, see page 6.

b From the Printers folder, double-click the icon for

The Paper Feed light is blinking.

your printer.

c From the Printer menu, make sure:

If there is an error message on your screen, follow the instructions on it. Click the ? on the error message for help.

– Default Printer is selected.

– Pause Printing is not selected.

Page 14 of the Lexmark Z33 user manual — Mac OS 8.6 to 9.1
Page 14 · click to enlarge
Page 14

Mac OS 8.6 to 9.1

Your software screens may be slightly different from the ones shown in this booklet. The arrows show you where to click.

see page 6. To install the printer software for Mac OS X, see page 14.

Lexmark Z33 — Mac OS 8.6 to 9.1 diagram (page 14)
Fig. 19 · Mac OS 8.6 to 9.1

Close all open software applications.

From the Country Selection dialog, select your country or region, and then click Continue.

From the Cartridge Changed dialog, click Yes.

Wait for the Lexmark Installation dialog shown in step 4 to appear. If it doesn’t, see page 16.

An alignment page prints.

refer to the Troubleshooting topic in the User’s Guide for Mac OS 8.6 to 9.1. To open the User’s Guide, see page 13.

Install and Agree

Page 15 of the Lexmark Z33 user manual — Congratulations!
Page 15 · click to enlarge
Page 15

Follow the instructions on your screen to enter alignment values using the page printed in step 6, and then click OK.

2 Double-click the Lexmark Users Guide.pdf icon.

User’s Guide for Mac OS 8.6 to 9.1

Lexmark Z33 — Printing from Mac OS 8.6 to 9.1 diagram (page 15)
Fig. 20 · Printing from Mac OS 8.6 to 9.1

From the Setup Complete dialog, click Finished.

Printing from Mac OS 8.6 to 9.1

Mac OS 8.6 to 9.1

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

Basic printing is as easy as:

1 Load the paper.

2 Open the file you want to print.

3 Click Printer overview to learn how to customize the printer settings using the printer software.

3 Customize the printer settings.

4 When you are finished, click File Quit.

4 Print your document.

The User’s Guide for Mac OS 8.6 to 9.1 contains printing instructions and ideas, maintenance tips, and troubleshooting information. To open the User’s Guide:

Congratulations!

You are finished setting up your printer for Mac OS 8.6 to 9.1.

1 From your desktop, double-click the folder for your printer.

Printer overview

Page 16 of the Lexmark Z33 user manual — Mac OS X
Page 16 · click to enlarge
Page 16

Mac OS X

From the Cartridge Alignment dialog, click Continue.

An alignment page prints.

see page 6. To install the printer software for Mac OS 8.6 to 9.1, see page 12.

Close all open applications.

  • Make sure you installed the print cartridges correctly (see page 3).
  • Follow the instructions on any error message on your screen.

Follow the instructions on your screen to enter alignment values using the page printed in step 7, and then click Continue.

From the Setup Exit dialog, click Finished.

Wait for the Lexmark printer software installation screen to appear. If it doesn’t appear, see page 16.

From the Installer dialog, click Install and Agree.

From the Country Selection dialog, select your country, and then click Continue. The Print Center opens.

From the Printer List, click the red close button.

Page 17 of the Lexmark Z33 user manual — Congratulations!
Page 17 · click to enlarge
Page 17

Printing from Mac OS X

4 From the Lexmark folder, double-click the Lexmark Solution Center icon.

Now that you have set up your printer and installed the printer software, you are ready to print your first document.

your printer and the cartridges you installed.

Basic printing is as easy as:

The Lexmark Solution Center

1 Load the paper.

Lexmark Z33 — Printing from Mac OS X diagram (page 17)
Fig. 21 · Printing from Mac OS X

2 Open the file you want to print.

3 Customize the printer settings.

4 Print your document.

Using the printer software

The Lexmark Solution Center is your complete guide to:

Mac OS X

  • Printer features, such as printing photos, envelopes, and more

5 To learn more:

  • Solving printing problems (troubleshooting)
  • Ordering, installing, and maintaining supplies

– Explore the tabs in the Lexmark Solution

Center.

  • Information about contacting Lexmark

– Click Help to view the printer software Help.

For example, to see how much ink is left in your cartridges:

From the File menu, click Quit when you are finished.

1 From the Dock, click the Finder icon.

2 From the Finder window, click Applications.

6 Click Quit to close the Lexmark Solution Center.

3 From the Applications folder, double-click the Lexmark folder.

Congratulations!

You are finished setting up your printer for Mac OS X.

Ink levels · Printer software Help · Quit Help

Page 18 of the Lexmark Z33 user manual — Need help during setup?
Page 18 · click to enlarge
Page 18

Need help during setup?

5 From the menu bar, choose Printing.

6 Make sure Set Default Printer and Start Print Queue are both selected.

The installation screen didn’t appear.

First, check your USB cable connection. If your printer still isn’t working:

1 Make sure the Lexmark printer software CD is in your CD-ROM drive.

1 From the Dock, click the Finder icon.

2 From your desktop, double-click the Lexmark CD icon for your printer.

2 From the Finder window, click the Applications button at the top of the screen.

3 From the CD folder, double-click the Install icon.

3 Double-click the Utilities folder.

4 Mac OS 8.6 to 9.1: Continue with step 4 on page 12.

4 Double-click the Print Center icon.

Mac OS X: Continue with step 4 on page 14.

If your printer is not listed, install the printer software (see page 14).

The printer isn’t working.

5 Select your printer in the Printer List.

Mac OS 8.6 to 9.1

6 From the Printers menu, choose Make Default.

1 From the Apple menu, choose Chooser.

7 From the Printers menu, choose Show Queue.

2 Select your printer in the left window of the Chooser.

8 From the Queue menu:

If your printer is not shown in the left window of the Chooser, install the printer software (see page 12).

a Choose Start Queue, if available.

b Choose Resume Job, if available.

3 Make sure an icon for your printer is in the Connect to: box of the Chooser.

The Paper Feed light is blinking.

If it isn’t, check your USB cable connection and repeat step 2 and step 3.

If there is an error message on your screen, follow the instructions on it. Click the ? on the error message for help.

4 From the desktop, select the icon for your printer.

Mac OS X

Page 19 of the Lexmark Z33 user manual — Locating your warranty information
Page 19 · click to enlarge
Page 19

Contacting Lexmark

  • Mac OS X

a Insert the printer software CD into your CD-ROM

Visit our Web site at www.lexmark.com to:

drive.

  • Receive technical support.

b Click Contact Lexmark.

  • Register your printer.

You can also view this customer support information from the Lexmark Solution Center by clicking Contacting Lexmark.

  • Access publications for your printer.
  • Check for free offers.

To contact our Customer Support Center:

Locating your warranty information

  • Windows

a Insert the printer software CD into your CD-ROM

drive.

Warranty information is provided with your printer.

b Click Contact Lexmark Technical Support.

You can also view customer support information from the Lexmark Solution Center by clicking Contact Information Customer Support.

  • Mac OS 8.6 to 9.1

a Insert the printer software CD into your CD-ROM

drive.

b Click Contact Lexmark.

You can also view this customer support information from the folder for your printer by double-clicking Technical Support.

Page 20 of the Lexmark Z33 user manual — www.lexmark.com
Page 20 · click to enlarge
Page 20

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Color Jetprinter is a trademark of Lexmark International, Inc. © 2001 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550

www.lexmark.com

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark Z33

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark Z33

Be the first to ask — other owners or our team will answer.

Original document

Lexmark Z33 manual PDF

20 pages·922 KB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…