EN
Lexmark logo
Official user manual

Lexmark xd2

171 pages·5.2 MB·Printer·PDF·ENDEFRITNLJA
Lexmark xd2
Table of Contents 348 sections Contents · Safety information · Learning about the printer · Thank you for choosing this printer! · … ShowHide
Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Page 1 of the Lexmark xd2 user manual — www.lexmark.com
Page 1 · click to enlarge
Page 1

C54x Series

User's Guide

www.lexmark.com

Machine type(s):

Model(s):

210, 230, 410, 430, 43W, 439, n01, n02, dnw, xd1, xd2, dn1, dn2, gd1, gd2, dw1, dw2, dt1, dt2, gt1, gt2

Page 2 of the Lexmark xd2 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Page 5 of the Lexmark xd2 user manual — Safety information
Page 5 · click to enlarge
Page 5
Lexmark xd2 — Safety information diagram (page 5)
Fig. 1 · Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off the optional drawer, and set it aside instead of trying to lift the drawer and printer at the same time.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

Safety information

Page 6 of the Lexmark xd2 user manual — Safety information
Page 6 · click to enlarge
Page 6

SAVE THESE INSTRUCTIONS.

Safety information

Page 7 of the Lexmark xd2 user manual — Finding information about the printer
Page 7 · click to enlarge
Page 7

Learning about the printer

Thank you for choosing this printer!

We've worked hard to make sure it will meet your needs.

To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.

We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Performing printing depending on your printer model • Configuring printer settings • Viewing and printing documents and photos • Setting up and using printer software • Setting up and configuring the printer on a network, depending on your printer model • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide—The User's Guide is available on the Software and Documentation CD. For updates, check our Web site at http://support.lexmark.com. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. Click ? to view context-sensitive information. Notes: • The Help installs automatically with the printer software. • The printer software is located in the printer Program folder or on the desktop, depending on your operating system.

Learning about the printer

Page 8 of the Lexmark xd2 user manual — Selecting a location for the printer
Page 8 · click to enlarge
Page 8
What are you looking for?Find it here The latest supplemental information, updates, and technical support: • Documentation • Driver downloads • Live chat support • E-mail support • Telephone supportLexmark Support Web site— http://support.lexmark.com Note: Select your region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your region or country can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and the back of the printer), and have it ready when you contact support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the US—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • Rest of the world—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:

Learning about the printer

Page 9 of the Lexmark xd2 user manual — Basic model
Page 9 · click to enlarge
Page 9
Lexmark xd2 — Printer configurations diagram (page 9)
Fig. 2 · Printer configurations
1102 mm (4 in.) 2508 mm (20 in.) 3152 mm (6 in.) 476 mm (3 in.) 5254 mm (10 in.)

Printer configurations

Basic model

Learning about the printer

Page 10 of the Lexmark xd2 user manual — Fully configured model
Page 10 · click to enlarge
Page 10
Lexmark xd2 — Printer configurations diagram (page 10)
Fig. 3 · Printer configurations
1Standard exit bin 2Standard 250-sheet tray (Tray 1) 3Manual feeder 4Printer control panel

Fully configured model

The following illustration shows a fully configured printer model with a 650-sheet duo drawer and an optional 550-sheet tray:

Learning about the printer

Page 11 of the Lexmark xd2 user manual — Printer configurations
Page 11 · click to enlarge
Page 11
Lexmark xd2 — Printer configurations diagram (page 11)
Fig. 4 · Printer configurations
1Standard 250-sheet tray (Tray 1) 2650-sheet duo drawer with integrated multipurpose feeder (Tray 2) 3Optional 550-sheet tray
Lexmark xd2 — Printer configurations diagram (page 11)
Fig. 5 · Printer configurations

Learning about the printer

Page 12 of the Lexmark xd2 user manual — Understanding the printer control panel
Page 12 · click to enlarge
Page 12

Understanding the printer control panel

Lexmark xd2 — Understanding the printer control panel diagram (page 12)
Fig. 6 · Understanding the printer control panel

4 5 6 7

ItemDescription 1DisplayShows messages that communicate the status of the printer 2SelectPress to initiate action on a menu item. 3Indicator lightIndicates the printer status: • Off—The printer is off. • Blinking green—The printer is warming up, processing data, or printing. • Solid green—The printer is on, but idle. • Blinking red—Operator intervention is needed. 4Stop/CancelStops all printer activity A list of options is offered once Stopped appears on the display. 5Navigation buttonsScrolls through menus, submenus, or settings on the display 6BackReturns the display to the previous screen 7MenuOpens the menu index Note: The menus are available only when the printer is in the Ready state.
Lexmark xd2 — Understanding the printer control panel diagram (page 12)
Fig. 7 · Understanding the printer control panel

Learning about the printer

Page 13 of the Lexmark xd2 user manual — Memory cards
Page 13 · click to enlarge
Page 13

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal.

Available options

Memory cards

  • Printer memory
  • Flash memory
  • Font cards

Additional printer setup

Page 14 of the Lexmark xd2 user manual — Accessing the system board to install internal options
Page 14 · click to enlarge
Page 14

Accessing the system board to install internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Remove the cover. a Turn the screws on the cover counterclockwise, and then remove them.

Lexmark xd2 — Accessing the system board to install internal options diagram (page 14)
Fig. 8 · Accessing the system board to install internal optio…

Additional printer setup

Page 15 of the Lexmark xd2 user manual — Accessing the system board to install internal options
Page 15 · click to enlarge
Page 15

b Gently pull the cover away from the printer, and then remove it.

Lexmark xd2 — Accessing the system board to install internal options diagram (page 15)
Fig. 9 · Accessing the system board to install internal optio…

2 Use the illustration below to locate the appropriate connector.

Additional printer setup

Page 16 of the Lexmark xd2 user manual — Accessing the system board to install internal options
Page 16 · click to enlarge
Page 16
Lexmark xd2 — Accessing the system board to install internal options diagram (page 16)
Fig. 10 · Accessing the system board to install internal optio…

1 Flash memory card connector

2 Memory card connector

Additional printer setup

Page 17 of the Lexmark xd2 user manual — Installing a memory card
Page 17 · click to enlarge
Page 17

Installing a memory card

The system board has one connector for an optional memory card.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

Lexmark xd2 — Installing a memory card diagram (page 17)
Fig. 11 · Installing a memory card

Additional printer setup

Page 18 of the Lexmark xd2 user manual — Installing a memory card
Page 18 · click to enlarge
Page 18

2 Open both latches on the connector completely.

Lexmark xd2 — Installing a memory card diagram (page 18)
Fig. 12 · Installing a memory card

3 Unpack the memory card.

4 Align the notches on the memory card with the ridges on the connector.

5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card.

Lexmark xd2 — Installing a memory card diagram (page 18)
Fig. 13 · Installing a memory card

1 Notch · 2 Latch · Additional printer setup

Page 19 of the Lexmark xd2 user manual — Installing a flash memory card
Page 19 · click to enlarge
Page 19

6 Reinstall the system board access cover.

Lexmark xd2 — Installing a flash memory card diagram (page 19)
Fig. 14 · Installing a flash memory card

Installing a flash memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

Lexmark xd2 — Installing a flash memory card diagram (page 19)
Fig. 15 · Installing a flash memory card

Additional printer setup

Page 20 of the Lexmark xd2 user manual — Installing a flash memory card
Page 20 · click to enlarge
Page 20

2 Unpack the memory card.

3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. This ensures the metal pins line up correctly as well.

Lexmark xd2 — Installing a flash memory card diagram (page 20)
Fig. 16 · Installing a flash memory card

4 Push the card firmly into place.

Lexmark xd2 — Installing a flash memory card diagram (page 20)
Fig. 17 · Installing a flash memory card
  • The entire length of the connector on the card must touch and be flush against the system board.
  • Be careful not to damage the connectors.

1 Plastic pins · 2 Metal pins · Additional printer setup

Page 21 of the Lexmark xd2 user manual — Installing an optional tray or drawer
Page 21 · click to enlarge
Page 21

5 Reinstall the system board cover.

Lexmark xd2 — Installing hardware options diagram (page 21)
Fig. 18 · Installing hardware options

Installing hardware options

Installing an optional tray or drawer

The printer supports two additional input sources: an optional 550-sheet tray and a 650-sheet duo drawer (Tray 2) with an integrated multipurpose feeder.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Unpack the optional 550-sheet tray, and then remove all packing material and the dust cover.

2 Place the tray in the location chosen for the printer.

Additional printer setup

Page 22 of the Lexmark xd2 user manual — Installing hardware options
Page 22 · click to enlarge
Page 22

3 Align a 650-sheet duo drawer with the optional 550-sheet tray, and then lower it into place.

Lexmark xd2 — Installing hardware options diagram (page 22)
Fig. 19 · Installing hardware options

4 Align the printer with the 650-sheet duo drawer, and then lower the printer into place.

Lexmark xd2 — Installing hardware options diagram (page 22)
Fig. 20 · Installing hardware options

5 Install the dust covers.

Additional printer setup

Page 23 of the Lexmark xd2 user manual — Printing a menu settings page
Page 23 · click to enlarge
Page 23

Attaching cables

Connect the printer to the computer using a USB cable or an Ethernet cable. A USB port requires a USB cable. Be sure to match the USB symbol on the cable with the USB symbol on the printer. Match the appropriate Ethernet cable to the Ethernet port.

Lexmark xd2 — Attaching cables diagram (page 23)
Fig. 21 · Attaching cables

Verifying printer setup

Printing a menu settings page

Print menu settings pages to review the current menu settings and to verify if the printer options are installed correctly.

Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it.

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Menu Settings Page appears, and then press .

After the menu settings pages print, Ready appears.

1 Ethernet port · 2 USB port · Additional printer setup

Page 24 of the Lexmark xd2 user manual — Using the World Wide Web
Page 24 · click to enlarge
Page 24

Printing a network setup page

If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Network Setup Page appears, and then press .

After the network setup page prints, Ready appears.

5 Check the first section on the network setup page, and confirm that Status is “Connected.”

If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software

A printer driver is software that lets the computer communicate with the printer. The printer software is typically installed during the initial printer setup.

For Windows users

1 Close all open software programs.

2 Insert the Software and Documentation CD.

3 From the main installation dialog, click Install Printer and Software.

4 Follow the instructions on the computer screen.

For Macintosh users

1 Close all open software applications.

2 Insert the Software and Documentation CD.

3 From the Finder desktop, double-click the printer CD icon that automatically appears.

4 Double-click the Install Printer and Software icon.

5 Follow the instructions on the computer screen.

Using the World Wide Web

1 Go to the Lexmark Web site at www.lexmark.com.

2 From the Drivers & Downloads menu, click Driver Finder.

3 Select your printer, and then select your operating system.

4 Download the driver and install the printer software.

Additional printer setup

Page 25 of the Lexmark xd2 user manual — In Mac OS X version 10.4 and earlier
Page 25 · click to enlarge
Page 25

Updating available options in the printer driver

Once the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.

For Windows users

1 Open the Printers folder:

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printer folder opens.

2 Select the printer.

3 Right-click the printer, and then select Properties.

4 Click the Install Options tab.

5 Under Available Options, add any installed hardware options.

6 Click Apply.

For Macintosh users

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax.

3 Select the printer, and then click Options & Supplies.

4 Click Driver, and then add any installed hardware options.

5 Click OK.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications.

2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.

3 Select the printer, and then from the Printers menu, choose Show Info.

4 From the pop-up menu, choose Installable Options.

5 Add any installed hardware options, and then click Apply Changes.

a Click · Additional printer setup

Page 26 of the Lexmark xd2 user manual — Installing the printer on a wireless network (Windows)
Page 26 · click to enlarge
Page 26

Setting up wireless printing

Information you will need to set up the printer on a wireless network

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode will be either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to auto for infrastructure networks.

Some ad hoc networks will also require the auto setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key

If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently in use on the network by selecting the Default WEP Transmit Key. or – WPA or WPA2 passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – No security

If your wireless network does not use any type of security, then you will not have any security information.

If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X username and password
  • Certificates

Installing the printer on a wireless network (Windows)

Before you install the printer on a wireless network, make sure that:

  • Your wireless network is set up and working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

Additional printer setup

Page 27 of the Lexmark xd2 user manual — Setting up wireless printing
Page 27 · click to enlarge
Page 27

1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.

Lexmark xd2 — Setting up wireless printing diagram (page 27)
Fig. 22 · Setting up wireless printing

Make sure the printer and computer are fully on and ready.

Do not connect the USB cable until instructed to do so on the screen.

2 Insert the Software and Documentation CD.

3 Click Install Printer and Software.

4 Click Agree to agree to the License Agreement.

5 Click Suggested, and then click Next.

6 Click Wireless Network Attach.

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

Additional printer setup

Page 28 of the Lexmark xd2 user manual — In Mac OS X version 10.4 and earlier
Page 28 · click to enlarge
Page 28

8 Follow the instructions on the computer screen to complete the software installation.

9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address in the space provided below:

MAC address___ ___ ___ ___ ___ ___

2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.

Lexmark xd2 — Prepare to configure the printer diagram (page 28)
Fig. 23 · Prepare to configure the printer

Enter the printer information

1 Access the AirPort options.

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

2 From the Network pop-up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open the Safari browser.

4 From the Bookmarks drop-down menu, select Show.

Additional printer setup

Page 29 of the Lexmark xd2 user manual — Configure your computer to use the printer wirelessly
Page 29 · click to enlarge
Page 29

5 Under Collections, select Bonjour or Rendezvous, and then double-click the printer name.

6 From the main page of the Embedded Web Server, navigate to the page where the wireless settings information is stored.

Configure the printer for wireless access

1 Type the name of your network (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode if you are using a wireless router.

3 Select the type of security you use to protect your wireless network.

4 Enter the security information necessary for the printer to join your wireless network.

5 Click Submit.

6 Open the AirPort application on your computer:

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

7 From the Network pop-up menu, select your wireless network.

Configure your computer to use the printer wirelessly

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a printer in the Printer Setup Utility or Print Center.

1 Install a PPD file on the computer: a Insert the Software and Documentation CD in the CD or DVD drive. b Double-click the installer package for the printer.

c From the Welcome screen, click Continue. d Click Continue again after viewing the Readme file. e Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.

f Select a Destination, and then click Continue. g From the Easy Install screen, click Install. h Type the user password, and then click OK.

All necessary software is installed on the computer. i Click Close when installation is complete.

Additional printer setup

Page 30 of the Lexmark xd2 user manual — Installing the printer on a wired network
Page 30 · click to enlarge
Page 30
2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Select the printer from the list. 5 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Printer Setup Utility or Print Center. 4 From the Printer List, choose Add. 5 Select the printer from the list. 6 Click Add. b For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Printer Setup Utility or Print Center. 4 From the Printer List, choose Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.

Installing the printer on a wired network

These instructions apply to Ethernet and fiber optic network connections.

Additional printer setup

Page 31 of the Lexmark xd2 user manual — For Macintosh users
Page 31 · click to enlarge
Page 31

Before you install the printer on a wired network, make sure that:

  • You have completed the initial setup of the printer.
  • The printer is connected to your network with the appropriate type of cable.

For Windows users

1 Insert the Software and Documentation CD.

Wait for the Welcome screen to appear.

If the CD does not launch after a minute, then do the following:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

2 Click Install Printer and Software.

3 Click Agree to agree to the License Agreement.

4 Select Suggested, and then click Next.

5 Select Wired Network Attach, and then click Next.

6 Select the printer manufacturer from the list.

7 Select the printer model from the list, and then click Next.

8 Select the printer from the list of printers discovered on the network, and then click Finish.

9 Follow the instructions on the computer screen to complete the installation.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

2 Print the network setup page from the printer. For information on printing a network setup page, see “Printing a network setup page” on page 24.

3 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.

4 Install the drivers and add the printer. a Install a PPD file on the computer:

1 Insert the Software and Documentation CD in the CD or DVD drive. 2 Double-click the installer package for the printer. 3 From the Welcome screen, click Continue. 4 Click Continue again after viewing the Readme file. 5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement. 6 Select a Destination, and then click Continue. 7 From the Easy Install screen, click Install.

a Click · Additional printer setup

Page 32 of the Lexmark xd2 user manual — In Mac OS X version 10.4 and earlier
Page 32 · click to enlarge
Page 32

8 Type the user password, and then click OK. All the necessary software is installed on the computer. 9 Click Restart when installation is complete. b Add the printer:

  • For IP printing:

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click IP. 5 Type the IP address of your printer in the Address field. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Click IP. 6 Type the IP address of your printer in the Address field. 7 Click Add. • For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone.

Additional printer setup

Page 33 of the Lexmark xd2 user manual — Installing the printer on a wired network
Page 33 · click to enlarge
Page 33

9 Select the printer from the list. 10 Click Add.

Additional printer setup

Page 34 of the Lexmark xd2 user manual — Using recycled paper and other office papers
Page 34 · click to enlarge
Page 34

Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see “Using Eco-Mode” on page 36.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of

Minimizing your printer's environmental impact

Page 35 of the Lexmark xd2 user manual — Place multiple pages on one sheet of paper
Page 35 · click to enlarge
Page 35

life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the paper
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Conserving supplies

There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:

Use both sides of the paper

If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper by selecting 2-sided printing from the Print dialog or the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple-page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N-Up) section of the Print dialog.

Minimizing your printer's environmental impact

Page 36 of the Lexmark xd2 user manual — Reducing printer noise
Page 36 · click to enlarge
Page 36

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or the Lexmark Toolbar, to see how the document will look before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Avoid paper jams

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 119.

Saving energy

Using Eco-Mode

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Power Saver mode after one minute of inactivity.

Paper Duplex is enabled on printer models supporting duplex.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

Off Use factory default settings for all settings associated with Eco-Mode. This setting supports the performance specifications for your printer.

To select an Eco-Mode setting:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Eco-Mode appears, and then press .

5 Select the setting you want, and then press .

Submitting changes appears.

Reducing printer noise

Use Quiet Mode to reduce the printer noise.

Minimizing your printer's environmental impact

Choose To

Page 37 of the Lexmark xd2 user manual — Adjusting Power Saver
Page 37 · click to enlarge
Page 37

On Reduce printer noise.

  • You may notice a reduction in processing speed.
  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • Fans run at a reduced speed or are turned off.
  • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer.

Off Use factory default settings. This setting supports the performance specifications for your printer.

To select a Quiet Mode setting:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Quiet Mode appears, and then press .

5 Select the setting you want, and then press .

Submitting changes appears.

Adjusting Power Saver

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Settings appears, and then press .

4 Press the arrow buttons until General Settings appears, and then press .

5 Press the arrow buttons until Timeout appears, and then press .

6 Press the arrow buttons until Power Saver appears, and then press .

7 Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver mode. Available settings range from 1–240 minutes.

8 Press .

Submitting changes appears.

9 Press , and then press until Ready appears.

Minimizing your printer's environmental impact

Choose To

Page 38 of the Lexmark xd2 user manual — Returning Lexmark cartridges for reuse or recycling
Page 38 · click to enlarge
Page 38

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products to Lexmark for recycling:

1 Visit our Web site at www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the pre-paid shipping label. You can also:

1 Visit our Web site at www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country from the list.

3 Follow the instructions on the computer screen.

Minimizing your printer's environmental impact

Page 39 of the Lexmark xd2 user manual — Assigning a custom paper type name to a tray
Page 39 · click to enlarge
Page 39

Loading paper and specialty media

This section explains how to use the 250-sheet tray, the manual feeder, an optional 550-sheet tray and the 650-sheet duo drawer with an integrated multipurpose feeder. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.

Linking and unlinking trays

Linking trays

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting for all trays must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.

Unlinking trays

Unlinked trays have settings that are not the same as the settings of any other tray.

To unlink a tray, change the following tray settings so that they do not match the settings of any other tray:

  • Paper Type (for example: Plain Paper, Letterhead, Custom Type <x>)

Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name. • Paper Size (for example: letter, A4, statement)

Load a different paper size to change the Paper Size setting for a tray. Paper Size settings are not automatic; they must be set manually from the Paper Size menu.

Assigning a custom paper type name to a tray

Assign a Custom Type name to a tray to link or unlink it. Associate the same Custom Type name to each tray that you want to link.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

4 Press the arrow buttons until Size/Type appears, and then press .

5 Press the arrow buttons, and then press to select the tray.

The Paper Size menu appears.

6 Press the arrow buttons until the Paper Type menu appears.

Loading paper and specialty media

Page 40 of the Lexmark xd2 user manual — Specify a unit of measure
Page 40 · click to enlarge
Page 40

7 Press .

8 Press the arrow buttons until Custom Type <x> or another custom name appears, and then press .

Submitting changes appears, followed by Paper Menu.

9 Press , and then press to return to the Ready state.

Setting the paper size and type

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

4 Press the arrow buttons until Size/Type appears, and then press .

5 Press the arrow buttons until the correct tray appears, and then press .

6 Press when Size appears.

7 Press the arrow buttons until the correct size appears, and then press .

Submitting changes appears, followed by Size.

8 Press the arrow buttons until Type appears, and then press .

9 Press the arrow buttons until the correct type appears, and then press .

Submitting changes appears, followed by Type.

Configuring Universal paper settings

The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:

  • Units of Measure (inches or millimeters)
  • Portrait Height and Portrait Width
  • Feed Direction

Specify a unit of measure

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

4 Press the arrow buttons until Universal Setup appears, and then press .

5 Press the arrow buttons until Units of Measure appears, and then press .

Loading paper and specialty media

Page 41 of the Lexmark xd2 user manual — Loading the standard 250-sheet tray
Page 41 · click to enlarge
Page 41

6 Press the arrow buttons until the correct unit of measure appears, and then press .

Submitting changes appears, followed by the Universal Setup menu.

7 Press , and then press to return to the Ready state.

Specify the paper height and width

Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.

1 From the Universal Setup menu, press the arrow buttons until Portrait Width or Portrait Height appears, and then press .

2 Press the arrow buttons to decrease or increase the setting, and then press .

Submitting changes appears, followed by the Universal Setup menu.

3 Press , and then press to return to the Ready state.

Loading the standard 250-sheet tray

The printer has one standard 250-sheet tray (Tray 1) with an attached manual feeder. The 250-sheet tray, the 650-sheet duo drawer, and the optional 550-sheet tray support the same paper sizes and types and are loaded in the same way.

1 Pull the tray out.

Lexmark xd2 — Loading the standard 250-sheet tray diagram (page 41)
Fig. 24 · Loading the standard 250-sheet tray

Loading paper and specialty media

Page 42 of the Lexmark xd2 user manual — Loading the standard 250-sheet tray
Page 42 · click to enlarge
Page 42

2 Squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being loaded.

Lexmark xd2 — Loading the standard 250-sheet tray diagram (page 42)
Fig. 25 · Loading the standard 250-sheet tray

3 If the paper is longer than A4 or letter size, push the green tab at the back of the tray to extend it.

Lexmark xd2 — Loading the standard 250-sheet tray diagram (page 42)
Fig. 26 · Loading the standard 250-sheet tray

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the paper stack with the recommended print side faceup.

Lexmark xd2 — Loading the standard 250-sheet tray diagram (page 42)
Fig. 27 · Loading the standard 250-sheet tray

Loading paper and specialty media

Page 43 of the Lexmark xd2 user manual — Loading the 650-sheet duo drawer
Page 43 · click to enlarge
Page 43

6 Make sure the paper guides are secure against the edges of the paper.

7 Insert the tray.

Lexmark xd2 — Loading the 650-sheet duo drawer diagram (page 43)
Fig. 28 · Loading the 650-sheet duo drawer

8 If a different type or size of paper was loaded than the type or size previously loaded in the tray, change the Paper Type or Paper Size setting for the tray from the printer control panel.

Loading the 650-sheet duo drawer

The 650-sheet duo drawer (Tray 2) consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The drawer is loaded in the same way as the 250-sheet tray and the optional 550-sheet tray, and supports the same paper types and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators, as shown in the following illustration:

Lexmark xd2 — Loading the 650-sheet duo drawer diagram (page 43)
Fig. 29 · Loading the 650-sheet duo drawer

1 Length guide tabs

3 Width guide tabs

Loading paper and specialty media

2 Size indicators

Page 44 of the Lexmark xd2 user manual — Using the multipurpose feeder
Page 44 · click to enlarge
Page 44

Using the multipurpose feeder

1 Push the feeder release latch to the left to open the multipurpose feeder.

Lexmark xd2 — Using the multipurpose feeder diagram (page 44)
Fig. 30 · Using the multipurpose feeder

2 Grasp the extension, and pull it straight out until it is fully extended.

3 Prepare the paper for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

  • Hold transparencies by the edges and fan them. Straighten the edges on a level surface.

4 Locate the stack height limiter and tab.

Loading paper and specialty media

Page 45 of the Lexmark xd2 user manual — Using the multipurpose feeder
Page 45 · click to enlarge
Page 45
Lexmark xd2 — Using the multipurpose feeder diagram (page 45)
Fig. 31 · Using the multipurpose feeder

2 Stack height limiter

5 Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack. • Load paper, card stock, and transparencies with the recommended print side facedown and the top edge entering first.

  • Load envelopes with the flap side up.
  • Do not load or close the multipurpose feeder while a job is printing.
  • Load only one size and type of paper at a time.

6 Make sure the paper is as far into the multipurpose feeder as it will go with very gentle pushing. Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.

Loading paper and specialty media

1 Tab · 3 Width guides · 4 Size indicators

Page 46 of the Lexmark xd2 user manual — Using the manual feeder
Page 46 · click to enlarge
Page 46

Using the manual feeder

The standard 250-sheet tray has an integrated manual feeder that can be used to print on different types of paper one sheet at a time.

1 Load one sheet of paper facedown into the center of the manual feeder.

Lexmark xd2 — Using the manual feeder diagram (page 46)
Fig. 32 · Using the manual feeder
  • Load letterhead faceup, with the top of the sheet entering first.
  • Load envelopes with the flap side down and with the stamp area as shown.

2 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.

3 Adjust the paper guides to the paper width.

Loading paper and specialty media

Page 47 of the Lexmark xd2 user manual — Using the manual feeder
Page 47 · click to enlarge
Page 47
Lexmark xd2 — Using the manual feeder diagram (page 47)
Fig. 33 · Using the manual feeder

Loading paper and specialty media

Page 48 of the Lexmark xd2 user manual — Grain direction
Page 48 · click to enlarge
Page 48

Paper and specialty media guidelines

Additional information for printing on speciality medias may be found in the Cardstock and Label Guide available at http://support.lexmark.com.

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long. Paper lighter than 75 g/m2 (20 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 80 g/m2 (21 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60 to 176 g/m2 (16 to 47 lb bond) paper, use grain long fibers.

Paper and specialty media guidelines

Page 49 of the Lexmark xd2 user manual — Storing paper
Page 49 · click to enlarge
Page 49

Fiber content

Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possesses characteristics that can negatively affect paper handling.

Selecting paper

Using appropriate paper prevents jams and helps ensure trouble-free printing.

To help avoid jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same source; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 176 g/m 2 weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
  • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.

Paper and specialty media guidelines

Page 50 of the Lexmark xd2 user manual — Paper sizes supported by the printer
Page 50 · click to enlarge
Page 50

Supported paper sizes, types, and weights

The following tables provide information on standard and optional input sources and the sizes, types, and weights of print media they support.

Paper sizes supported by the printer

  • Your printer model may have a 650-sheet duo drawer, which consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The 550-sheet tray part of the 650-sheet duo drawer supports the same paper as the optional 550-sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550-sheet tray is not available for all printer models.
Lexmark xd2 — Paper sizes supported by the printer diagram (page 50)
Fig. 34 · Paper sizes supported by the printer

Paper size Dimensions 250-sheet tray Optional 550-sheet tray Multipurpose feeder

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.83 x 8.3 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.)

A6 105 x 148 mm (4.1 x 5.8 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.)

Letter 216 x 279 mm (8.5 x 11 in.)

Folio 216 x 330 mm (8.5 x 13 in.)

Oficio (Mexico) 216 x 340 mm (8.5 x 13 in.)

Legal 216 x 356 mm (8.5 x 14 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.)

* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Paper and specialty media guidelines

Page 51 of the Lexmark xd2 user manual — Paper types supported by the printer
Page 51 · click to enlarge
Page 51
Lexmark xd2 — Paper types supported by the printer diagram (page 51)
Fig. 35 · Paper types supported by the printer

Paper size Dimensions 250-sheet tray Optional 550-sheet tray Multipurpose feeder

Universal* 148 x 210 mm (5.8 x 8.3 in.) up to 216 x 356 mm (8.5 x 14 in.)

76 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)

9 Envelope 98 x 225 mm (3.9 x 8.9 in.)

10 Envelope 105 x 241 mm (4.1 x 9.5 in.)

DL Envelope 110 x 220 mm (4.3 x 8.7 in.)

B5 Envelope 176 x 250 mm (6.9 x 9.8 in.)

C5 Envelope 162 x 229 mm (6.4 x 9 in.)

Monarch 105 x 241 mm (4.1 x 9.5 in.)

Other Envelope 98 x 162 mm (3.9 x 6.3 in.) up to 176 x 250 mm (6.9 x 9.8 in.)

* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Paper types supported by the printer

  • Your printer model may have a 650-sheet duo drawer, which consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The 550-sheet tray part of the 650-sheet duo drawer supports the same paper as the optional 550-sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550-sheet tray is not available for all printer models.

Paper and specialty media guidelines

Page 52 of the Lexmark xd2 user manual — Paper types and weights supported by the printer
Page 52 · click to enlarge
Page 52
Lexmark xd2 — Paper types and weights supported by the printer diagram (page 52)
Fig. 36 · Paper types and weights supported by the printer

* Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the standard tray, the manual feeder, and the multipurpose feeder.

Paper types and weights supported by the printer

  • Your printer model may have a 650-sheet duo drawer, which consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The 550-sheet tray part of the 650-sheet duo drawer supports the same paper as the optional 550-sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550-sheet tray is not available for all printer models.

Paper type 250-sheet tray Optional 550-sheet tray

Multipurpose feeder Manual feeder

Light1, 2 60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

Plain1, 2 75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

Heavy1, 2 90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

Cardstock1, 2 105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

1 Paper types must be set to match the supporting paper weights.

2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.

3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.

4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250-sheet tray, manual feeder, and multipurpose feeder.

5 The pressure sensitive area must enter the printer first.

6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.

7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Paper and specialty media guidelines

Page 53 of the Lexmark xd2 user manual — Paper types and weights supported by the printer
Page 53 · click to enlarge
Page 53

Paper type 250-sheet tray Optional 550-sheet tray

Multipurpose feeder Manual feeder

Glossy papers Book—88 to 176 g/m2

Book—88 to 176 g/m2

Book—88 to 176 g/m2

Book—88 to 176 g/m2

grain long (60 to 120 lb book)

grain long (60 to 120 lb book)

grain long (60 to 120 lb book)

grain long (60 to 120 lb book)

Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

Card stock—maximum (grain long)3

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Cover—135 g/m2

Cover—135 g/m2

Cover—135 g/m2

Cover—135 g/m2

Card stock—maximum (grain short)1

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Cover—176 g/m2

Cover—176 g/m2

Cover—176 g/m2

Cover—176 g/m2

Transparencies4 170–180 g/m2 (45 to 48 lb) N/A 170–180 g/m2 (45 to 48 lb) 170–180 g/m2 (45 to 48 lb)

Labels—maximum5 Paper—131 g/m2

Paper—131 g/m2 (35 lb bond)

Paper—131 g/m2

Paper—131 g/m2

Envelopes6,7 X X 60 to 105 g/m2 (16 to 28 lb bond) 60 to 105 g/m2 (16 to 28 lb bond)

1 Paper types must be set to match the supporting paper weights.

2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.

3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.

4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250-sheet tray, manual feeder, and multipurpose feeder.

5 The pressure sensitive area must enter the printer first.

6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.

7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Paper and specialty media guidelines

Show 11 more labels / short text on this page
(50 lb) · (50 lb) · (50 lb) · (50 lb) · (65 lb) · (65 lb) · (65 lb) · (65 lb) · (35 lb bond) · (35 lb bond) · (35 lb bond)
Page 54 of the Lexmark xd2 user manual — Output capacity
Page 54 · click to enlarge
Page 54

Paper capacities

Input capacities

  • Your printer model may have a 650-sheet duo drawer, which consists of a 550-sheet tray and an integrated 100-sheet multipurpose feeder. The 550-sheet tray part of the 650-sheet duo drawer supports the same paper as the optional 550-sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550-sheet tray is not available for all printer models.

Paper type 250-sheet tray Optional 550-sheet tray Multipurpose tray

Paper 250 sheets1 550 sheets1 100 sheets1

Labels 1002 2002 502

Transparencies 50 X 50

Envelopes X X 10

Other X X Various quantities3

1 Based on 75 g/m2 (20 lb) paper

2 Capacity varies depending on label material and construction.

3 Capacity varies depending on the weight and type of paper.

Output capacity

Paper type Standard output bin1

Paper 100 sheets2

1 Capacity may vary depending on media specifications and the printer operating environment.

2 Based on 75 g/m2 (20 lb) paper

Paper and specialty media guidelines

Page 55 of the Lexmark xd2 user manual — For Macintosh users
Page 55 · click to enlarge
Page 55

Printing

Printing a document

Printing a document

1 Load paper into a tray or feeder.

2 From the printer control panel Paper menu, set the Paper Size/Type to match the loaded paper.

3 Send the print job:

For Windows users

a With a document open, click File Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.

For Macintosh users

a Customize the settings as needed in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop-up menus, adjust the settings as needed.

Printing

Page 56 of the Lexmark xd2 user manual — Tips on using letterhead
Page 56 · click to enlarge
Page 56

Printing specialty documents

Additional information for printing on speciality medias may be found in the Cardstock and Label Guide available on http://support.lexmark.com.

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to load the letterhead:

Lexmark xd2 — Tips on using letterhead diagram (page 56)
Fig. 37 · Tips on using letterhead
  • Standard 250-sheet tray
  • Optional 550-sheet tray
  • Simplex (one-sided) printing from trays

Printed letterhead design is placed faceup. The top edge of the sheet with the logo is placed at the front of the tray.

Printed letterhead design is placed facedown. The top edge of the sheet with the logo is placed at the back of the tray.

Printing

Page 57 of the Lexmark xd2 user manual — Tips on using transparencies
Page 57 · click to enlarge
Page 57
Lexmark xd2 — Tips on using transparencies diagram (page 57)
Fig. 38 · Tips on using transparencies

Preprinted letterhead design is placed facedown. The top edge of the sheet with the logo should enter the manual feeder first.

Preprinted letterhead design is placed faceup. The top edge of the sheet with the logo should enter the manual feeder last.

Tips on using transparencies

Print samples on the transparencies being considered for use before buying large quantities.

When printing on transparencies:

  • Feed transparencies from the standard 250-sheet tray or the manual feeder.
  • Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure that the transparencies are able to withstand temperatures up to 175° C (350° F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • Note: Transparencies can be printed at a temperature up to 180° C (356° F) if Transparency Weight is set to Heavy and Transparency Texture is set to Rough. Select these settings in the Paper menu using a local utility.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, fan the stack to prevent sheets from sticking together.
  • We recommend Lexmark part number 70X7240 for letter-size transparencies and Lexmark part number 12A5010 for A4-size transparencies.

Printing

Page 58 of the Lexmark xd2 user manual — Tips on using labels
Page 58 · click to enlarge
Page 58

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

When printing on envelopes:

  • Feed envelopes from the manual feeder or optional multipurpose feeder.
  • Set the Paper Type to Envelope, and select the envelope size.
  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the envelopes can withstand temperatures up to 200°C (392°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For the best performance, use envelopes made from 60 g/m 2 (16 lb bond) paper. Use up to 105 g/m 2 (28 lb bond) weight for envelopes as long as the cotton content is 25% or less. All-cotton envelopes must not exceed 90 g/m 2
  • (24 lb bond) weight.
  • Use only new envelopes.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 210°C (410°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions.

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.

Printing

Page 59 of the Lexmark xd2 user manual — Tips on using card stock
Page 59 · click to enlarge
Page 59
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 2-mm (0.06-in.) strip on the leading and driver edge, and use a non-oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single-ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • From MarkVision Professional, the printer software, or the printer control panel: 1 Set the Paper Type to Card Stock. 2 Set the Paper Weight to Card Stock Weight. 3 Set the Card Stock Weight to Normal or Heavy.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 200°C (392°F) without releasing hazardous emissions.
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing

Page 60 of the Lexmark xd2 user manual — Printing from a flash drive
Page 60 · click to enlarge
Page 60

Printing from a flash drive

A USB port is located on the printer control panel of some models. Insert a flash drive to print supported file types. Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx.

Many flash drives are tested and approved for use with the printer. For more information, visit the Lexmark Web site at www.lexmark.com.

  • Hi-Speed USB devices must support the Full-speed standard. Devices only supporting USB Low-speed capabilities are not supported.
  • USB devices must support the FAT ( File Allocation Tables ) system. Devices formatted with NTFS ( New Technology File System ) or any other file system are not supported.
  • Before printing an encrypted .pdf file, enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Make sure the printer is on and Ready or Busy appears.

2 Insert a flash drive into the USB port.

3 Press the arrow buttons until the document you want to print appears, and then press .

4 Press to print one copy, or enter the number of copies using the arrow buttons, and then press to initiate the print job.

Printing

Page 61 of the Lexmark xd2 user manual — Printing a font sample list
Page 61 · click to enlarge
Page 61

Printing photos from a PictBridge-enabled digital camera

1 Insert one end of the USB cable into the camera.

2 Insert the other end of the USB cable into the USB port on the front of the printer.

  • Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see the camera documentation.
  • If the PictBridge connection is successful, then a confirmation message appears on the printer display.

3 Follow the instructions on the camera to select and print photos.

Printing information pages

Printing a font sample list

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Print Fonts appears, and then press .

5 Press the arrow buttons until PCL Fonts or PostScript Fonts appears, and then press .

After the font sample list prints, Ready appears.

Printing

Page 62 of the Lexmark xd2 user manual — For Windows users
Page 62 · click to enlarge
Page 62

Printing a directory list

A directory list shows the resources stored in flash memory.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Print Directory appears, and then press .

After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

1 Turn the printer off.

2 Hold down and while turning the printer on.

3 Release the buttons when the dots appear, and then wait for Config Menu to appear.

4 Press the arrow buttons until Prt Quality Pgs appears, and then press .

The print quality test pages print.

5 Press the arrow buttons until Exit Config Menu appears, and then press .

Ready appears.

Canceling a print job

Canceling a print job from the printer control panel

1 Press .

Stopping appears, followed by Cancel Print Job.

2 Press .

Canceling appears, followed by Ready.

Canceling a print job from the computer

For Windows users

1 Open the printers foldera Click

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printers folder opens.

2 Double-click the printer icon.

Printing

Page 63 of the Lexmark xd2 user manual — For Macintosh users
Page 63 · click to enlarge
Page 63

3 Select the job to cancel.

4 From the keyboard, press Delete.

From the Windows taskbar:

When you send a job to print, a small printer icon appears in the right corner of the taskbar.

1 Double-click the printer icon.

A list of print jobs appears in the printer window.

2 Select a job to cancel.

3 From the keyboard, press Delete.

For Macintosh users

In Mac OS X version 10.5 or later:

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax, and then double-click the printer icon.

3 From the printer window, select the job to cancel.

4 From the icon bar at the top of the window, click the Delete icon.

In Mac OS X version 10.4 and earlier:

1 From the Go menu, choose Applications.

2 Double-click Utilities, and then double-click Printer Setup Utility or Print Center.

3 Double-click the printer icon.

4 From the printer window, select the job to cancel.

5 From the icon bar at the top of the window, click the Delete icon.

Printing

Page 64 of the Lexmark xd2 user manual — Supplies menu
Page 64 · click to enlarge
Page 64

Understanding printer menus

Menus list

Supplies Menu Paper Menu Reports Network/Ports Settings

Yellow Cartridge Black Cartridge

Paper Texture Paper Weight

Network Setup Page Print Fonts

USB Menu Wireless Menu

Finishing Menu Quality Menu

Supplies menu

Cyan, Magenta, Yellow, or Black Toner Cartridges

Shows the status of the toner cartridges

Early Warning Low Invalid Replace Missing or Defective OK Unsupported

Shows the status of the imaging kit

OK Replace Black Imaging Kit Replace Color Imaging Kit Defective

Shows the status of the waste toner box

Near Full Replace Missing OK

Show 28 more labels / short text on this page
Cyan Cartridge · Default Source · Menu Settings Page · Active NIC · General Settings · Magenta Cartridge · Size/Type · Device Statistics · Network Menu · Setup Menu · Imaging Kit · Paper Loading · Print Defects · Utilities Menu · Waste Toner Box · Custom Types · Asset Report · PDF Menu · Universal Setup · PostScript Menu · PCL Emul Menu · Image Menu · PictBridge Menu · Flash Drive Menu · Menu item Description · Imaging Kit · Waste Toner Box · Understanding printer menus
Page 65 of the Lexmark xd2 user manual — Paper Size/Type menu
Page 65 · click to enlarge
Page 65

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray MP Feeder Manual Paper Manual Env

  • Tray 1 (standard tray) is the factory default setting.
  • The 650-sheet duo drawer must be installed in order for MP Feeder or Tray 2 to appear as a menu setting in the Paper menu.
  • Only an installed paper source will appear as a menu setting.
  • A paper source selected by a print job will override the Default Source setting for the duration of the print job.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray.

Paper Size/Type menu

Specifies the paper size loaded in each tray

A4 A5 JIS B5 Letter Folio Oficio (Mexico) Legal Executive Universal

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray.
Show 5 more labels / short text on this page
Menu item Description · Default Source · Menu item Description · Tray <x> Size · Understanding printer menus
Page 66 of the Lexmark xd2 user manual — Paper menu
Page 66 · click to enlarge
Page 66

Specifies the type of paper loaded in each tray

Plain Paper Glossy Paper Card Stock Transparency Recycled Letterhead Colored Paper Labels Bond Preprinted Light Paper Heavy Paper Rough/Cotton Custom Type

  • Plain Paper is the factory default setting for Tray 1. Custom Type <x> is the factory default setting for all other trays.
  • If available, a user-defined name will appear instead of Custom Type <x>.
  • Use this menu item to configure automatic tray linking.

Specifies the paper size loaded in the multipurpose feeder

A4 A5 JIS B5 A6 Statement Letter Folio Oficio (Mexico) Legal Executive Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope B5 Envelope C5 Envelope Other Envelope

  • The 650-sheet duo drawer must be installed in order for MP Feeder to appear as a menu setting in the Paper menu.
  • Letter is the US factory default setting. A4 is the international factory default setting.
  • The multipurpose feeder does not automatically sense paper size. The paper size value must be set.
Show 4 more labels / short text on this page
Menu item Description · Tray <x> Type · MP Feeder Size · Understanding printer menus
Page 67 of the Lexmark xd2 user manual — Paper menu
Page 67 · click to enlarge
Page 67

Specifies the type of paper loaded in the multipurpose feeder

Plain Paper Glossy Paper Card Stock Transparency Recycled Letterhead Colored Paper Labels Bond Envelope Preprinted Light Paper Heavy Paper Rough/Cotton Custom Type

  • The 650-sheet duo drawer must be installed in order for MP Feeder to appear as a menu setting in the Paper menu.
  • Plain paper is the factory default setting.

Specifies the size of the paper being manually loaded

A4 A5 JIS B5 A6 Statement Letter Folio Oficio (Mexico) Legal Executive Universal

Specifies the type of paper being manually loaded

Plain Paper Glossy Paper Card Stock Transparency Recycled Letterhead Colored Paper Labels Bond Preprinted Light Paper Heavy Paper Rough/Cotton Custom Type

Show 5 more labels / short text on this page
Menu item Description · MP Feeder Type · Manual Paper Size · Manual Paper Type · Understanding printer menus
Page 68 of the Lexmark xd2 user manual — Paper Texture menu
Page 68 · click to enlarge
Page 68

Specifies the size of the envelope being manually loaded

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope B5 Envelope C5 Envelope Other Envelope

Specifies the type of envelope being manually loaded

Envelope Custom Type

Paper Texture menu

Specifies the relative texture of the paper loaded

Specifies the relative texture of the card stock loaded

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative texture of the transparencies loaded

Specifies the relative texture of the recycled paper loaded

Specifies the relative texture of the glossy paper loaded

Specifies the relative texture of the labels loaded

Show 17 more labels / short text on this page
Menu item Description · Manual Envelope Size · Manual Envelope Type · Menu item Description · Plain Texture · Normal Smooth Rough · Card Stock Texture · Normal Smooth Rough · Transparency Texture · Normal Smooth Rough · Recycled Texture · Normal Smooth Rough · Glossy Texture · Normal Smooth Rough · Labels Texture · Normal Smooth Rough · Understanding printer menus
Page 69 of the Lexmark xd2 user manual — Paper Texture menu
Page 69 · click to enlarge
Page 69

Specifies the relative texture of the paper loaded

Specifies the relative texture of the envelopes loaded

Specifies the relative texture of the paper loaded

Specifies the relative texture of the paper loaded

Specifies the relative texture of the colored paper loaded

Specifies the relative texture of the light paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the heavy paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the rough/cotton paper loaded

  • Rough is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the custom paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.
Show 20 more labels / short text on this page
Menu item Description · Bond Texture · Rough Smooth Normal · Envelope Texture · Normal Smooth Rough · Letterhead Texture · Normal Smooth Rough · Preprinted Texture · Normal Smooth Rough · Colored Texture · Normal Smooth Rough · Light Paper · Normal Smooth Rough · Heavy Paper · Normal Smooth Rough · Rough/Cotton Paper · Rough · Custom <x> Paper · Normal Smooth Rough · Understanding printer menus
Page 70 of the Lexmark xd2 user manual — Paper Weight menu
Page 70 · click to enlarge
Page 70

Paper Weight menu

Plain Weight, Glossy Weight, Bond Weight, Letterhead Weight, Preprinted Weight, or Colored Weight

Identifies the relative weight of the paper loaded

Identifies the relative weight of the transparencies loaded

Identifies the relative weight of the recycled paper loaded

Identifies the relative weight of the labels loaded

Identifies the relative weight of the envelopes loaded

Identifies the relative weight of the card stock loaded

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Identifies the relative weight of the light paper loaded

  • Light is the factory default setting.
  • Settings appear only if light paper is supported.

Identifies the relative weight of the heavy paper loaded

  • Heavy is the factory default setting.
  • Settings appear only if heavy paper is supported.
Show 17 more labels / short text on this page
Menu items Definition · Normal Light Heavy · Transparency Weight · Normal Light Heavy · Recycled Weight · Normal Light Heavy · Labels Weight · Normal Light Heavy · Envelope Weight · Normal Light Heavy · Card Stock Weight · Normal Light Heavy · Light Paper Weight · Light · Heavy Paper Weight · Heavy · Understanding printer menus
Page 71 of the Lexmark xd2 user manual — Paper Loading menu
Page 71 · click to enlarge
Page 71

Identifies the relative weight of the rough/cotton paper loaded

  • Normal is the factory default setting.
  • Settings appear only if rough/cotton paper is supported.

Identifies the relative weight of the custom paper type loaded

  • Normal is the factory default setting.
  • Settings appear only if custom paper is supported.

Paper Loading menu

Determines the paper loading direction for all jobs that specify Recycled as the paper type

Determines the paper loading direction for all jobs that specify glossy as the paper type

Determines the paper loading direction for all jobs that specify Bond as the paper type

Determines the paper loading direction for all jobs that specify Letterhead as the paper type

Determines the paper loading direction for all jobs that specify Preprinted as the paper type

Determines the paper loading direction for all jobs that specify Colored as the paper type

Determines the paper loading direction for all jobs that specify Light Paper as the paper type

Show 21 more labels / short text on this page
Menu items Definition · Rough/Cotton Paper Weight · Normal · Custom <x> · Normal Light Heavy · Menu item Description · Recycled Loading · Off Duplex · Glossy Loading · Off Duplex · Bond Loading · Off Duplex · Letterhead Loading · Off Duplex · Preprinted Loading · Off Duplex · Colored Loading · Off Duplex · Light Paper Loading · Off Duplex · Understanding printer menus
Page 72 of the Lexmark xd2 user manual — Custom Types menu
Page 72 · click to enlarge
Page 72

Determines the paper loading direction for all jobs that specify Heavy Paper as the paper type

Determines the paper loading direction for all jobs that specify Rough/Cotton as the paper type

Determines the paper loading direction for all jobs that specify Custom as the paper type

  • Off is the factory default setting.
  • Custom <x> Loading is available only if the custom type is supported.

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type <x> name or a user-defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional. This user-defined name displays instead of Custom Type <x>.

Paper Card Stock Transparency Glossy Labels Envelope Rough/Cotton

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or feeder in order for you to print from that source.

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Glossy Labels Envelope Rough/Cotton

  • Paper is the factory default setting.
  • The Recycled type must be supported by the selected tray or feeder in order for you to print from that source.
Show 11 more labels / short text on this page
Menu item Description · Heavy Paper Loading · Off Duplex · Rough/Cotton Loading · Off Duplex · Custom <x> Loading · Off Duplex · Menu item Description · Custom Type <x> · Recycled · Understanding printer menus
Page 73 of the Lexmark xd2 user manual — Menu Settings Page menu
Page 73 · click to enlarge
Page 73

Universal Setup menu

Identifies the units of measure

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Sets the portrait width

3–14.17 inches 76–360 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Sets the portrait height

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Specifies the feed direction

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray.

Reports

Menu Settings Page menu

Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information

Show 8 more labels / short text on this page
Menu item Description · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction · Menu item Description · Understanding printer menus
Page 74 of the Lexmark xd2 user manual — Asset Report menu
Page 74 · click to enlarge
Page 74

Device Statistics menu

Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages

Network Setup Page menu

Network Setup Page Prints a report containing information about the network settings, such as TCP/IP address information

  • This menu item appears only for printers with a network print server installed.
  • The page prints when this item is selected.

Print Fonts menu

Prints a report of all the fonts available for the printer language currently set in the printer

PCL Fonts PostScript Fonts

Print Defects menu

Print Defects Prints a diagnostic list of problems

  • The page prints when this item is selected.
  • The list should be printed on letteror A4-size paper.

Asset Report menu

Asset Report Prints a report containing asset information including the printer serial number and model name. The report contains text and UPC bar codes that can be scanned into an asset database.

Show 7 more labels / short text on this page
Menu item Description · Menu item Description · Menu item Description · Print Fonts · Menu item Description · Menu item Description · Understanding printer menus
Page 75 of the Lexmark xd2 user manual — Network menu
Page 75 · click to enlarge
Page 75

Network/Ports

Active NIC menu

Shows the print server

Auto

  • Auto is the factory default setting.
  • This menu item appears only if an optional network card is installed.

Network menu

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PostScript emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the network input buffer

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 12 more labels / short text on this page
Menu item Description · Active NIC · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto Off · Network Buffer · Auto Disabled · Understanding printer menus
Page 76 of the Lexmark xd2 user manual — UAA LAA
Page 76 · click to enlarge
Page 76

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

Sets printer settings on jobs sent through a network port

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Reports

Print Setup Page Prints a report containing information about the current network setup

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Card

Lets you view the connection status of the network card

View Card Speed Lets you view the speed of a currently active network card

Lets you view the network addresses

UAA LAA

Sets the amount of time in seconds that a network print job can take before it is canceled

  • 90 seconds is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value of 1–9 is selected, then the setting is saved as 10.
Show 12 more labels / short text on this page
Menu item Description · Mac Binary PS · Auto On Off · Network Setup · Menu item Description · Menu item Description · View Card Status · Connected Disconnected · Network Address · Job Timeout · 0-225 seconds · Understanding printer menus
Page 77 of the Lexmark xd2 user manual — TCP/IP menu
Page 77 · click to enlarge
Page 77

Allows the printer to print a banner page

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu TCP/IP

View Hostname Lets you view the current TCP/IP hostname

IP Address Lets you view or change the current TCP/IP Address

Netmask Lets you view or change the current TCP/IP Netmask

Gateway Lets you view or change the current TCP/IP Gateway

Specifies the DHCP address and parameter assignment setting

Specifies the Zero Configuration Networking setting

Enables the built-in FTP server, which allows you to send files to the printer using the File Transfer Protocol.

Enables the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address Lets you view or change the current WINS Server Address

Lets you view or change the current DDNS/mDNS Server Address

DNS Server Address Lets you view or change the current DNS Server Address

Show 18 more labels / short text on this page
Menu item Description · Banner Page · Off On · Menu item Description · Activate · Activates TCP/IP · On Off · Enable DHCP · On Off · Enable Auto IP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS/mDNS · Yes No · Understanding printer menus
Page 78 of the Lexmark xd2 user manual — Wireless menu
Page 78 · click to enlarge
Page 78

IPv6 menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu IPv6

Enables IPv6 in the printer

Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router

Lets you view the current setting

Enables DHCPv6 in the printer

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Wireless

Specifies the network mode

  • Ad hoc is the factory default setting. Ad hoc mode configures the printer for wireless networking directly between it and a computer.
  • Infrastructure mode lets the printer access a network using an access point.

Specifies the wireless standard for the wireless network

802.11b/g/n 802.11n 802.11b/g

Lets you select an available network for the printer to use

Show 16 more labels / short text on this page
Menu item Description · Enable IPv6 · On Off · Auto Configuration · On Off · View Hostname · View Address · View Router Address · Enable DHCPv6 · On Off · Menu item Description · Network Mode · Ad hoc Infrastructure · Compatibility · Choose Network · Understanding printer menus
Page 79 of the Lexmark xd2 user manual — USB menu
Page 79 · click to enlarge
Page 79

View Signal Quality Lets you view the quality of the wireless connection

View Security Mode Lets you view the encryption method for the wireless connection

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu AppleTalk

View Name Shows the assigned AppleTalk name

View Address Shows the assigned AppleTalk address

Provides a list of AppleTalk zones available on the network

USB menu

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PostScript emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Show 12 more labels / short text on this page
Menu item Description · Menu item Description · Activate · Activates AppleTalk support · Yes No · Set Zone · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · Understanding printer menus
Page 80 of the Lexmark xd2 user manual — AppleTalk menu
Page 80 · click to enlarge
Page 80

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the USB input buffer

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

Sets the network address, netmask, or gateway information for an external print server that is attached to the printer using a USB cable

ENA Address ENA Netmask ENA Gateway

Show 9 more labels / short text on this page
Menu item Description · NPA Mode · Auto Off · USB Buffer · Auto Disabled · Mac Binary PS · Auto Off On · USB With ENA · Understanding printer menus
Page 81 of the Lexmark xd2 user manual — General Settings menu
Page 81 · click to enlarge
Page 81

Settings

General Settings menu

Sets the language of the text appearing on the display

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portugues Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimizes the use of energy, paper, or specialty media

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • The Energy setting minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.

Reduces the amount of noise produced by the printer

  • Off is the factory default setting.
  • On configures the printer to produce as little noise as possible.
Show 6 more labels / short text on this page
Menu item Description · Display Language · Eco-Mode · Quiet Mode · Off On · Understanding printer menus
Page 82 of the Lexmark xd2 user manual — Settings
Page 82 · click to enlarge
Page 82

Instructs the printer to run the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the Country select screen, the default setting becomes No.

Sets an alarm to sound when the printer requires operator intervention

Available selections are:

  • Single
  • Off
  • Single is the factory default setting for Alarm Control. Single sounds three quick beeps.
  • Off means no alarm will sound.

Specifies the number of minutes of inactivity before some systems begin entering a minimum power state

Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs.

Sets the amount of time in seconds the printer waits for additional data before canceling a print job

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs.

Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period

Show 21 more labels / short text on this page
Menu item Description · Run Initial Setup · Yes No · Alarms · Cartridge Alarm · Timeouts · Power Saver · 1–240 min · Timeouts · Screen Timeout · 15–300 sec · Timeouts · Print Timeout · Disabled 1–255 sec · Timeouts · Wait Timeout · Disabled 15–65535 sec · Print Recovery · Auto Continue · Disabled 5–255 sec · Understanding printer menus
Page 83 of the Lexmark xd2 user manual — Setup menu
Page 83 · click to enlarge
Page 83

Specifies whether the printer reprints jammed pages

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Returns the printer settings to the factory default settings

Do Not Restore Restore

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user-defined settings.
  • Restore returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.

Setup menu

Sets the default printer language

PCL Emulation PS Emulation PPDS Emulation

  • PCL is the factory default printer language.
  • PCL emulation uses a PCL interpreter for processing print jobs. PostScript emulation uses a PS interpreter for processing print jobs. PPDS emulation uses a PPDS interpreter for processing print jobs
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Sets the logical and physical printable area

Normal Fit to Page Whole Page

Show 12 more labels / short text on this page
Menu item Description · Print Recovery · Jam Recovery · Auto On Off · Print Recovery · Page Protect · Off On · Factory Defaults · Menu item Description · Printer Language · Print Area · Understanding printer menus
Page 84 of the Lexmark xd2 user manual — Finishing menu
Page 84 · click to enlarge
Page 84

Sets the storage location for downloads

  • RAM is the factory default setting.
  • Storing downloads in flash memory places them in permanent storage. Downloads remain in flash memory even when the printer is turned off.
  • Storing downloads in RAM is temporary.
  • This menu appears only if a flash option is installed.

Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available

  • Off is the factory default setting. Off sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • The On setting retains the downloads during language changes and printer resets. If the printer runs out of memory, 38 Memory Full appears, and downloads are not deleted.

Finishing menu

Specifies whether duplex (2-sided) printing is set as the default for all print jobs

1 sided 2 sided

  • 1 sided is the factory default setting.
  • To set 2-sided printing from the software program: for Windows users, click File Print , and then click Properties , Preferences , Options , or Setup ; for Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop-up menus.

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge specifies that binding be placed on the left edge of portrait pages and the top edge of landscape pages.
  • Short Edge specifies that binding be placed on the top edge of portrait pages and the left edge of landscape pages.

1–999 Specifies a default number of copies for each print job

Show 10 more labels / short text on this page
Menu item Description · Download Target · RAM Flash · Resource Save · Off On · Menu item Description · Sides (Duplex) · Duplex Binding · Copies · Understanding printer menus
Page 85 of the Lexmark xd2 user manual — Finishing menu
Page 85 · click to enlarge
Page 85

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

Off (1,1,1,2,2,2) On (1,2,1,2,1,2)

  • Off is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.
  • Both settings print the entire job the number of times specified by the Copies menu setting.

Specifies whether blank separator sheets are inserted

None Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray MP Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Multi-Purpose Feeder to appear as a menu setting.

Specifies that multiple-page images be printed on one side of a sheet of paper

Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specifies the positioning of multiple-page images when using N-up (pages-sides)

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of images and whether the images are in portrait or landscape orientation.
Show 8 more labels / short text on this page
Menu item Description · Blank Pages · Collate · Separator Sheets · Separator Source · N-up (pages-side) · N-up Ordering · Understanding printer menus
Page 86 of the Lexmark xd2 user manual — Quality menu
Page 86 · click to enlarge
Page 86

Specifies the orientation of a multiple-page sheet

Prints a border around each page image when using N-up (pages-sides)

Quality menu

Adjusts the color output on the printed page

  • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page.
  • Off turns off color correction.
  • Manual allows customization of the color tables using the settings available from the Manual Color menu.
  • Due to the differences in additive and subtractive colors, certain colors that appear on computer monitors are impossible to duplicate on the printed page.

Specifies the printed output resolution

4800 CQ 1200 dpi

1–5 Lightens or darkens the printed output

  • 4 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
  • If Print Mode is set to Black Only, a setting of 5 increases toner density and darkness to all print jobs.
  • If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.

Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts

  • Off is the factory default setting.
  • To set Enhance Fine Lines from the software program: for Windows users, click File Print , and then click Properties , Preferences , Options , or Setup ; for Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop-up menus.
Show 13 more labels / short text on this page
Menu item Description · Orientation · Auto Landscape Portrait · N-up Border · None Solid · Menu item Description · Color Correction · Auto Off Manual · Print Resolution · Toner Darkness · Enhance Fine Lines · Off On · Understanding printer menus
Page 87 of the Lexmark xd2 user manual — Quality menu
Page 87 · click to enlarge
Page 87

Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

  • Off is the factory default setting.
  • On overrides Toner Darkness settings.

Adjusts brightness in color outputs

  • 0 is the factory default setting.
  • -6 is the maximum decrease. 6 is the maximum increase.

0–5 Adjusts contrast in color outputs

0–5 Adjusts saturation in color outputs

Adjusts color in printed output by increasing or decreasing the amount of toner used for each color

Cyan Magenta Yellow Black

  • 0 is the factory default setting.
  • Available selections for each setting are -5 to 5.

Restores the Color Balance factory default settings

Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer

sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

  • Selecting any setting prints the sample.
  • Color samples consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed. These pages can be used to help decide which combinations to use to get the desired printed output.
  • From a browser window, type the IP address of the printer to access a complete list of color sample pages from the Embedded Web Server.
Show 11 more labels / short text on this page
Menu item Description · Color Saver · Off On · RGB Brightness · RGB Contrast · RGB Saturation · Color Balance · Color Balance · Reset Defaults · Color Samples · Understanding printer menus
Page 88 of the Lexmark xd2 user manual — Quality menu
Page 88 · click to enlarge
Page 88

Customizes the RGB color conversions

RGB Image RGB Text RGB Graphics

Available selections for each setting are:

Vivid sRGB Display Display—True Black sRGB Vivid Off

  • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor.
  • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivid applies a color conversion table that increases saturation. This is preferred for business graphics and text.
  • Vivid applies a color conversion table that produces brighter, more saturated colors.
  • Display—True Black applies a color conversion table that uses only black toner for neutral gray colors.
  • Off turns off color conversion.

Customizes the CMYK color conversions

CMYK Image CMYK Text CMYK Graphics

Available selections for each setting are:

US CMYK Euro CMYK Vivid CMYK Off

  • US CMYK is the US factory default setting. US CMYK applies a color conversion table that tries to produce output that matches SWOP color output.
  • Euro CMYK is the international factory default setting. Euro CMYK applies a color conversion table that tries to produce output that matches EuroScale color output.
  • Vivid CMYK increases color saturation for the US CMYK color conversion table.
  • Off turns off color conversion.

Color Adjust Initiates an automatic color adjust calibration

Show 4 more labels / short text on this page
Menu item Description · Manual Color · Manual Color · Understanding printer menus
Page 89 of the Lexmark xd2 user manual — PDF menu
Page 89 · click to enlarge
Page 89

Utilities menu

Formats the flash memory. Flash memory refers to the memory added by installing an optional flash memory card in the printer.

  • An optional flash memory card must be installed in the printer and operating properly for this menu item to be available. The optional flash memory card must not be Read/Write or Write protected.
  • No cancels the format request.
  • Yes deletes all data stored in flash memory.

Prepares the flash memory to receive new data by retrieving lost storage space

  • An optional flash memory card must be installed in the printer and operating properly for this menu item to be available. The optional flash memory card must not be Read/Write or Write protected.
  • No cancels the defragment request.
  • Yes reformats the flash memory after transferring all downloads to regular printer memory. When formatting is complete, the downloads are loaded back into flash memory.

Assists in isolating the source of a print job problem

  • When Activate is selected, all data sent to the printer is printed in hexadecimal, and character representation and control codes are not executed.
  • To exit Hex Trace, turn the printer off or reset the printer.

Provides an estimate of the percentage coverage of cyan, magenta, yellow, and black toner on a page. The estimate is printed on a separator page.

PDF menu

Scales page content to fit the selected paper size

Show 13 more labels / short text on this page
Menu item Description · Format Flash · No Yes · Defragment Flash · No Yes · Hex Trace · Activate · Coverage Estimator · Off On · Menu item Description · Scale to Fit · No Yes · Understanding printer menus
Page 90 of the Lexmark xd2 user manual — PCL Emul menu
Page 90 · click to enlarge
Page 90

Prints annotations in a PDF

Do Not Print Print

PostScript menu

Prints a page containing the PostScript error

Establishes the font search order

  • Resident is the factory default setting.
  • A formatted flash memory option card or printer hard disk must be installed in the printer and operating properly for this menu item to be available.
  • The flash memory option or printer hard disk cannot be Read/Write, Write, or password protected.
  • Job Buffer Size must not be set to 100%.

Enhances the contrast and sharpness of low-resolution images and smooths their color transitions

  • Off is the factory default setting.
  • Image Smoothing has no effect on images that are 300 dpi or higher in resolution.

PCL Emul menu

Specifies the set of fonts used by the Font Name menu item

Resident Download Flash All

  • Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
  • Flash settings show all fonts resident in that option.
  • Flash options must be properly formatted and cannot be Read/Write, Write, or password protected.
  • Download shows all the fonts downloaded into RAM.
  • All shows all fonts available to any option.
Show 12 more labels / short text on this page
Menu item Description · Annotations · Menu item Description · Print PS Error · Off On · Font Priority · Resident Flash · Image Smoothing · Off On · Menu item Description · Font Source · Understanding printer menus
Page 91 of the Lexmark xd2 user manual — 10U PC-8 12U PC-850
Page 91 · click to enlarge
Page 91

Identifies a specific font and the option where it is stored

  • Courier is the factory default setting.
  • Courier shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, and D for Download.

Specifies the symbol set for each font name

10U PC-8 12U PC-850

  • 10U PC-8 is the US factory default setting.
  • 12U PC-850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages, or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25-point increments.

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed-space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01-cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on the page

  • Portrait is the factory default setting.
  • Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international factory default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.
Show 15 more labels / short text on this page
Menu item Description · Font Name · Courier · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · 1–255 60 64 · Understanding printer menus
Page 92 of the Lexmark xd2 user manual — PostScript menu
Page 92 · click to enlarge
Page 92

Sets the printer to print on A4-size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

  • Off is the factory default setting.
  • Changes to these settings are duplicated in the PPDS menu.

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

  • Off is the factory default setting.
  • Changes to these settings are duplicated in the PPDS menu.

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Assign MP Feeder Assign Tray Assign Manual Paper Assign Man Env

Available selections for each setting are:

  • Off is the factory default setting.
  • None is not an available selection. It is displayed only when it is selected by the PCL 5 interpreter.
  • None ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Displays the factory default setting assigned to each tray, drawer, or feeder

Returns all tray, drawer, and feeder assignments to the factory default settings

Show 15 more labels / short text on this page
Menu item Description · PCL Emulation Settings · A4 Width · PCL Emulation Settings · Off On · PCL Emulation Settings · Off On · Tray Renumber · Off None 0–199 · Tray Renumber · View Factory Def · Tray Renumber · Restore Defaults · Yes No · Understanding printer menus
Page 93 of the Lexmark xd2 user manual — PictBridge menu
Page 93 · click to enlarge
Page 93

Image menu

Selects the optimal paper size, scaling, and orientation

  • On is the factory default setting.
  • The On setting overrides scaling and orientation settings for some images.

Inverts bi-tonal monochrome images

  • Off is the factory default setting.
  • The font size can be increased in 1-point increments.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Best Fit Anchor Top Left Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

PictBridge menu

Controls the size of each photo printed from a PictBridge-enabled digital camera

Auto L 2L Hagaki Postcard Card Size 100 x 150 mm 4 x 6 in 8 x 10 in Letter A4 A5 JIS B5

  • Auto is the factory default setting.
  • If both the printer and the PictBridge-enabled digital camera have a value for this setting, the camera value always supersedes the printer value.
Show 10 more labels / short text on this page
Menu item Description · Auto Fit · On Off · Invert · Off On · Scaling · Orientation · Menu item Description · Photo Size · Understanding printer menus
Page 94 of the Lexmark xd2 user manual — Flash drive menu
Page 94 · click to enlarge
Page 94

Determines the maximum number of images that can be printed on one side of the paper

Auto Off 2 Up 3 Up 4 Up 6 Up 9 Up 12 Up 16 Up Index Print

  • Auto is the factory default setting.
  • If both the printer and the PictBridge-enabled digital camera have a value for this setting, the camera value always supersedes the printer value.

Determines which resolution, toner darkness, and color saver values the printer uses when printing photos sent from a PictBridge-enabled digital camera

  • Normal is the factory default setting.
  • If both the printer and the PictBridge-enabled camera have a value for this setting, the camera value always supersedes the printer value.

Identifies the printer default input source when printing photos from a PictBridge-enabled digital camera

Manual Paper MP Feeder Tray

  • Manual Paper is the factory default setting.
  • A photo size larger than the size of the media installed in the PictBridge-enabled digital camera cannot be selected.

Flash drive menu

Enables or disables the USB port on the front of the printer

Enables or disables the ability of the flash drive to update the firmware code by way of a USB device

1–999 Sets the number of copies the printer should produce for each page contained in a print job

Controls whether the printer prints on one side or both sides of the paper

1 sided 2 sided

Show 13 more labels / short text on this page
Menu item Description · Layout · Quality · Normal Draft Fine · Paper Source · Menu item Description · Enable Drive · Enable Disable · Update Code · Enable Disable · Copies · Sides (Duplex) · Understanding printer menus
Page 95 of the Lexmark xd2 user manual — Checking the status of supplies from a network computer
Page 95 · click to enlarge
Page 95

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

You can check the status of printer supplies by printing a menu settings page:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Menu Settings Page appears, and then press .

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

2 Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Maintaining the printer

Page 96 of the Lexmark xd2 user manual — Ordering toner cartridges
Page 96 · click to enlarge
Page 96

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Ordering toner cartridges

When 88 Cyan Cartridge Low, 88 Magenta Cartridge Low, 88 Yellow Cartridge Low, or 88 Black Cartridge low appears, order a new cartridge.

When 88 Replace Cyan Cartridge, 88 Replace Magenta Cartridge, 88 Replace Yellow Cartridge, or 88 Replace Black Cartridge appears, you must replace the specified toner cartridge.

Lexmark xd2 — Ordering toner cartridges diagram (page 96)
Fig. 39 · Ordering toner cartridges

Part name Part number C540 and C543 C544 C546

Maintaining the printer

Page 97 of the Lexmark xd2 user manual — Ordering imaging kits
Page 97 · click to enlarge
Page 97
Lexmark xd2 — Ordering imaging kits diagram (page 97)
Fig. 40 · Ordering imaging kits

Part name Part number C540 and C543 C544 C546

Ordering imaging kits

When Replace black and color imaging kit or Replace black imaging kit appears, order a replacement imaging kit.

Lexmark xd2 — Ordering imaging kits diagram (page 97)
Fig. 41 · Ordering imaging kits

Maintaining the printer

Page 98 of the Lexmark xd2 user manual — Replacing the waste toner box
Page 98 · click to enlarge
Page 98

Ordering a waste toner bottle

When 82 Replace Waste Toner appears, order a replacement waste toner box. The waste toner box must be replaced when 82 Replace Waste Toner appears.

Part name Part number

Waste toner bottle C540X75G

Replacing supplies

Replacing the waste toner box

Replace the waste toner box when 82 Replace waste toner appears. The printer will not continue printing until the waste toner box is replaced.

Lexmark xd2 — Replacing the waste toner box diagram (page 98)
Fig. 42 · Replacing the waste toner box

2 Waste toner box

3 Right side cover

1 Top door · 4 Front door · Maintaining the printer

Page 99 of the Lexmark xd2 user manual — Ordering a waste toner bottle
Page 99 · click to enlarge
Page 99

1 Unpack the replacement waste toner box.

2 Grasp the front door at the sides, and then pull it toward you.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 99)
Fig. 43 · Ordering a waste toner bottle

3 Open the top door by sliding the button forward.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 99)
Fig. 44 · Ordering a waste toner bottle

4 Remove the right side cover.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 99)
Fig. 45 · Ordering a waste toner bottle

Maintaining the printer

Page 100 of the Lexmark xd2 user manual — Ordering a waste toner bottle
Page 100 · click to enlarge
Page 100

5 Press the green levers on each side of the waste toner box, and then remove it.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 100)
Fig. 46 · Ordering a waste toner bottle

6 Place the waste toner box in the enclosed packaging.

For more information, see “Recycling Lexmark products” on page 38.

7 Insert the new waste toner box.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 100)
Fig. 47 · Ordering a waste toner bottle

8 Replace the right side cover.

Lexmark xd2 — Ordering a waste toner bottle diagram (page 100)
Fig. 48 · Ordering a waste toner bottle

Maintaining the printer

Page 101 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 101 · click to enlarge
Page 101

9 Close the top door.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 101)
Fig. 49 · Replacing a black and color imaging kit

10 Close the front door.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 101)
Fig. 50 · Replacing a black and color imaging kit

Replacing a black and color imaging kit

Replace the black and color imaging kit when 31.yy Defective Imaging Kit appears.

1 Grasp the front door at the sides, and then pull it toward you.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 101)
Fig. 51 · Replacing a black and color imaging kit

Maintaining the printer

Page 102 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 102 · click to enlarge
Page 102

2 Open the top door by sliding the button forward.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 102)
Fig. 52 · Replacing a black and color imaging kit

3 Remove the toner cartridges by lifting the handles, and then gently pulling them away from the imaging kit.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 102)
Fig. 53 · Replacing a black and color imaging kit

4 Remove the right side cover.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 102)
Fig. 54 · Replacing a black and color imaging kit

Maintaining the printer

Page 103 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 103 · click to enlarge
Page 103

5 Press the green levers on each side of the waste toner box, and then remove it.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 103)
Fig. 55 · Replacing a black and color imaging kit

6 Lift the blue levers on the imaging kit, and then pull it toward you.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 103)
Fig. 56 · Replacing a black and color imaging kit

7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 103)
Fig. 57 · Replacing a black and color imaging kit

Maintaining the printer

Page 104 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 104 · click to enlarge
Page 104

8 Remove the yellow, cyan, magenta, and black developer units.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 104)
Fig. 58 · Replacing a black and color imaging kit

9 Unpack the replacement black and color imaging kit, and leave the packaging on the developer units.

10 Gently shake the yellow, cyan, magenta, and black developer units side to side.

11 Remove the packaging from the developer units.

12 Insert the yellow, cyan, magenta, and black developer units.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 104)
Fig. 59 · Replacing a black and color imaging kit

13 Place the used black and color imaging kit in the enclosed package.

For more information, see “Recycling Lexmark products” on page 38.

Maintaining the printer

Page 105 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 105 · click to enlarge
Page 105

14 Align and insert the imaging kit.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 105)
Fig. 60 · Replacing a black and color imaging kit

15 Gently, but firmly push the blue levers down until the imaging kit drops into place.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 105)
Fig. 61 · Replacing a black and color imaging kit

16 Replace the waste toner box.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 105)
Fig. 62 · Replacing a black and color imaging kit

Maintaining the printer

Page 106 of the Lexmark xd2 user manual — Replacing a black and color imaging kit
Page 106 · click to enlarge
Page 106

17 Replace the right side cover.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 106)
Fig. 63 · Replacing a black and color imaging kit

18 Replace the toner cartridges.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 106)
Fig. 64 · Replacing a black and color imaging kit

19 Close the top door.

Lexmark xd2 — Replacing a black and color imaging kit diagram (page 106)
Fig. 65 · Replacing a black and color imaging kit

Maintaining the printer

Page 107 of the Lexmark xd2 user manual — Replacing a toner cartridge
Page 107 · click to enlarge
Page 107

20 Close the front door.

Lexmark xd2 — Replacing a toner cartridge diagram (page 107)
Fig. 66 · Replacing a toner cartridge

Replacing a toner cartridge

Replace the specified toner cartridge (yellow, cyan, magenta, or black) when 88 Replace <color> Cartridge appears. The printer will not continue printing until the specified cartridge is replaced.

1 Make sure the printer is on and Ready or 88 Replace <color> Cartridge appears.

2 Unpack the new cartridge, and then set it near the printer.

3 Open the top door by sliding the button forward.

Lexmark xd2 — Replacing a toner cartridge diagram (page 107)
Fig. 67 · Replacing a toner cartridge

Maintaining the printer

Page 108 of the Lexmark xd2 user manual — Replacing a toner cartridge
Page 108 · click to enlarge
Page 108

4 Remove the toner cartridge by lifting the handle, and then gently pulling it away from the imaging kit.

Lexmark xd2 — Replacing a toner cartridge diagram (page 108)
Fig. 68 · Replacing a toner cartridge

5 Align the new toner cartridge, and then press down until it clicks into place.

Lexmark xd2 — Replacing a toner cartridge diagram (page 108)
Fig. 69 · Replacing a toner cartridge

Maintaining the printer

Page 109 of the Lexmark xd2 user manual — Replacing a developer unit
Page 109 · click to enlarge
Page 109

6 Close the top door.

Lexmark xd2 — Replacing a developer unit diagram (page 109)
Fig. 70 · Replacing a developer unit

Replacing a developer unit

Replace a developer unit when a print quality defect occurs.

1 Grasp the front door at the sides, and then pull it toward you.

Lexmark xd2 — Replacing a developer unit diagram (page 109)
Fig. 71 · Replacing a developer unit

2 Open the top door by sliding the button forward.

Lexmark xd2 — Replacing a developer unit diagram (page 109)
Fig. 72 · Replacing a developer unit

Maintaining the printer

Page 110 of the Lexmark xd2 user manual — Replacing a developer unit
Page 110 · click to enlarge
Page 110

3 Remove the toner cartridges by lifting the handles and then gently pulling them away from the imaging kit.

Lexmark xd2 — Replacing a developer unit diagram (page 110)
Fig. 73 · Replacing a developer unit

4 Remove the right side cover.

Lexmark xd2 — Replacing a developer unit diagram (page 110)
Fig. 74 · Replacing a developer unit

5 Press the green levers on each side of the waste toner bottle, and then remove it.

Lexmark xd2 — Replacing a developer unit diagram (page 110)
Fig. 75 · Replacing a developer unit

Maintaining the printer

Page 111 of the Lexmark xd2 user manual — Replacing a developer unit
Page 111 · click to enlarge
Page 111

6 Lift the blue levers on the imaging kit, and then pull it toward you.

Lexmark xd2 — Replacing a developer unit diagram (page 111)
Fig. 76 · Replacing a developer unit

7 Press down on the blue levers, grasp the handles on the sides, and then pull the imaging kit out.

Lexmark xd2 — Replacing a developer unit diagram (page 111)
Fig. 77 · Replacing a developer unit

8 Remove the used developer unit.

Lexmark xd2 — Replacing a developer unit diagram (page 111)
Fig. 78 · Replacing a developer unit

9 Place the used developer unit in the enclosed package.

For more information, see “Recycling Lexmark products” on page 38.

10 Unpack the replacement developer unit, and leave the packaging on.

11 Gently shake the developer unit from side to side.

Maintaining the printer

Page 112 of the Lexmark xd2 user manual — Replacing a developer unit
Page 112 · click to enlarge
Page 112

12 Remove the red shipping cover from the developer unit.

Lexmark xd2 — Replacing a developer unit diagram (page 112)
Fig. 79 · Replacing a developer unit

13 Insert the developer unit.

Lexmark xd2 — Replacing a developer unit diagram (page 112)
Fig. 80 · Replacing a developer unit

14 Align and insert the imaging kit.

Lexmark xd2 — Replacing a developer unit diagram (page 112)
Fig. 81 · Replacing a developer unit

Maintaining the printer

Page 113 of the Lexmark xd2 user manual — Replacing a developer unit
Page 113 · click to enlarge
Page 113

15 Gently, but firmly push the blue levers down until the imaging kit drops into place.

Lexmark xd2 — Replacing a developer unit diagram (page 113)
Fig. 82 · Replacing a developer unit

16 Replace the waste toner box.

Lexmark xd2 — Replacing a developer unit diagram (page 113)
Fig. 83 · Replacing a developer unit

17 Replace the right side cover.

Lexmark xd2 — Replacing a developer unit diagram (page 113)
Fig. 84 · Replacing a developer unit

Maintaining the printer

Page 114 of the Lexmark xd2 user manual — Cleaning the exterior of the printer
Page 114 · click to enlarge
Page 114

18 Replace the toner cartridges.

Lexmark xd2 — Cleaning the exterior of the printer diagram (page 114)
Fig. 85 · Cleaning the exterior of the printer

19 Close the top door.

Lexmark xd2 — Cleaning the exterior of the printer diagram (page 114)
Fig. 86 · Cleaning the exterior of the printer

20 Close the front door.

Lexmark xd2 — Cleaning the exterior of the printer diagram (page 114)
Fig. 87 · Cleaning the exterior of the printer

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit tray.

3 Dampen a clean, lint-free cloth with water.

Maintaining the printer

Page 115 of the Lexmark xd2 user manual — Shipping the printer
Page 115 · click to enlarge
Page 115

4 Wipe only the outside of the printer, making sure to include the standard exit tray.

5 Make sure the standard exit tray is dry before beginning a new print job.

Moving the printer

Before moving the printer

21 kg (46.2 lbs.)

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Maintaining the printer

Page 116 of the Lexmark xd2 user manual — Using the Embedded Web Server
Page 116 · click to enlarge
Page 116

Administrative support

Restoring the factory default settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often referred to as the factory default settings. If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Settings appears, and then press .

4 Press the arrow buttons until General Settings appears, and then press .

5 Press the arrow buttons until Factory Defaults appears, and then press .

6 Press the arrow buttons until Restore Now appears, and then press .

Submitting changes appears briefly.

7 Press , and then press until Ready appears.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions:

  • Configuring printer settings
  • Checking the status of the printer supplies
  • Configuring network settings
  • Viewing reports
  • Restoring the factory default settings
  • Viewing the virtual display
  • Setting Web page password protect
  • Setting Panel PIN protect
  • Setting the date and time

To access the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

2 Click one of the tabs to access information about the printer, change settings, or view a report.

Administrative support

Page 117 of the Lexmark xd2 user manual — Copying printer settings to other printers
Page 117 · click to enlarge
Page 117

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.

To set up e-mail alerts:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Under Other Settings, click E-mail Alert Setup.

4 Select the items for notification and type in the e-mail addresses that you want to receive e-mail alerts.

5 Click Submit.

Configuring supply notifications

You can determine how you would like to be notified when supplies run low or reach their end-of-life.

To configure supply notifications using the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Print Settings.

4 Click Supply Notifications.

5 From the drop-down box for each supply, select among the options for notification. Explanations for each option are provided.

6 Click Submit to save your selections.

Copying printer settings to other printers

Using the Embedded Web Server, you can copy printer settings to up to 15 other network printers. To copy printer settings:

1 Type the printer IP address into the address field of your Web browser.

2 Click Copy Printer Settings.

3 To change the language, select a language from the drop-down list, and then click Click here to submit language.

4 Click Printer Settings.

Administrative support

Page 118 of the Lexmark xd2 user manual — Setting up e-mail alerts
Page 118 · click to enlarge
Page 118

5 Enter the IP addresses of the source and target printers.

6 Click Copy Printer Settings.

Administrative support

Page 119 of the Lexmark xd2 user manual — Paper recommendations
Page 119 · click to enlarge
Page 119

Clearing jams

Jam error messages appear on the printer control panel display and include the area of the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed.

Avoiding jams

The following hints can help you avoid jams:

Paper tray recommendations

  • Make sure the paper lies flat in the tray.
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing too tightly against the paper or envelopes.
  • Push the tray in firmly after loading paper.

Paper recommendations

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
Lexmark xd2 — Paper recommendations diagram (page 119)
Fig. 88 · Paper recommendations
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Make sure all sizes and types are set correctly in the printer control panel menus.
  • Store paper per the manufacturer's recommendations.

Clearing jams

Page 120 of the Lexmark xd2 user manual — Understanding jam numbers and locations
Page 120 · click to enlarge
Page 120

Understanding jam numbers and locations

When a jam occurs, a message indicating the jam location appears. Open doors and covers, and remove trays to access jam locations.

Jam number Access point To access the jam

200 250-sheet tray (Tray 1) and manual feeder

1 Open the front door, and then remove any jams. 2 Open the fuser cover, and then remove any jams. 3 Close the fuser cover. 4 Close the front door. 5 Pull out Tray 1, and then remove any jams. 6 Reinsert Tray 1.

201 Under the fuser

202 In the fuser

In the duplex area

24x 550-sheet tray 1 Pull the 550-sheet tray out, and then remove any jams. 2 Reinsert the tray.

250 In the multipurpose feeder 1 Press the release latch to the left to release the multipurpose feeder. 2 Inspect the multipurpose feeder, and then remove any jams. 3 Close the multipurpose feeder.

230–231and 235 · Clearing jams

Page 121 of the Lexmark xd2 user manual — 200–202 and 230 paper jams
Page 121 · click to enlarge
Page 121

200–202 and 230 paper jams

1 If the jam is in the paper tray: a Grasp the handle, and pull the standard 250-sheet tray (Tray 1) and manual feeder out.

Lexmark xd2 — 200–202 and 230 paper jams diagram (page 121)
Fig. 89 · 200–202 and 230 paper jams

b Remove the jam.

d Press .

2 If the jam is inside the printer: a Grasp the front door at the side handholds, and then pull it toward you to open it.

Lexmark xd2 — 200–202 and 230 paper jams diagram (page 121)
Fig. 90 · 200–202 and 230 paper jams

Clearing jams

Page 122 of the Lexmark xd2 user manual — 200–202 and 230 paper jams
Page 122 · click to enlarge
Page 122

b If the jam is visible, remove the jammed paper.

Lexmark xd2 — 200–202 and 230 paper jams diagram (page 122)
Fig. 91 · 200–202 and 230 paper jams

The fuser cover closes when released.

Lexmark xd2 — 200–202 and 230 paper jams diagram (page 122)
Fig. 92 · 200–202 and 230 paper jams

Clearing jams

Page 123 of the Lexmark xd2 user manual — 231 and 235 paper jams
Page 123 · click to enlarge
Page 123
Lexmark xd2 — 231 and 235 paper jams diagram (page 123)
Fig. 93 · 231 and 235 paper jams

f Press .

231 and 235 paper jams

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

2 Remove the jam.

3 Load the tray with the correct paper size.

4 Insert the tray.

5 Close the front door.

6 Press .

Clearing jams

Page 124 of the Lexmark xd2 user manual — 250 paper jam
Page 124 · click to enlarge
Page 124

24x paper jam

1 Grasp the handle, and pull the optional 550-sheet tray out.

Lexmark xd2 — 24x paper jam diagram (page 124)
Fig. 94 · 24x paper jam

2 Remove the jammed paper.

3 Insert the tray.

4 Press .

250 paper jam

1 Push the lever in the multipurpose feeder down to access the jammed paper.

Lexmark xd2 — 250 paper jam diagram (page 124)
Fig. 95 · 250 paper jam

2 Remove the jam.

3 Insert the tray.

4 Press .

Clearing jams

Page 125 of the Lexmark xd2 user manual — Load <input src> with <size>
Page 125 · click to enlarge
Page 125

Troubleshooting

Understanding printer messages

Calibrating

The printer is adjusting the color. Wait for the message to clear.

Close door

Close the upper and lower doors.

Insert Tray <x>

Insert the specified tray into the printer.

Reload printed pages in Tray <x>

  • Press to clear the message and continue processing the second side of the sheet.
  • Press , and then press to cancel printing.

Load <input src> with <custom type name>

Try one or more of the following:

  • Load the specified paper to clear the message and continue printing.
  • Press , and then press to cancel the print job.

Load <input src> with <custom string>

Try one or more of the following:

  • Load the specified paper to clear the message and continue printing.
  • Press , and then press to cancel printing.

Load <input src> with <size>

Try one or more of the following:

  • Load the paper tray or other source with the correct paper type and size.
  • Press , and then press to cancel the print job.

Troubleshooting

Page 126 of the Lexmark xd2 user manual — Load single sheet feeder with <type> <size>
Page 126 · click to enlarge
Page 126

Load <input src> with <type> <size>

Try one or more of the following:

  • Load the paper tray or other source with the correct paper type and size.
  • Press , and then press to cancel the print job.

Load single sheet feeder with <custom type name>

Try one or more of the following:

  • Load the manual feeder with the correct paper type and size.

If there is no paper in the feeder, load a sheet, and then press to clear the message and continue printing. • Press to clear the message and continue printing.

The printer manually overrides the request, and then prints from an automatically selected tray. • Press , and then press to cancel the print job.

Load single sheet feeder with <custom string>

Try one or more of the following:

  • Load the manual feeder with the correct paper type and size.
  • If there is no paper in the feeder, load a sheet, and then press to clear the message and continue printing.
  • Select the paper type and size to manually override the request.
  • Press , and then press to cancel the print job.

Load single sheet feeder with <size>

Try one or more of the following:

  • Load the manual feeder with the correct paper type and size.
  • If there is no paper in the feeder, load a sheet of paper, and then press to clear the message and continue printing.
  • Select the paper type and size to manually override the request.
  • Press to clear the message and continue printing.

The printer manually overrides the request, and then prints from an automatically selected tray. • Press , and then press to cancel the print job.

Load single sheet feeder with <type> <size>

Try one or more of the following:

  • Load the manual feeder with the correct paper type and size.

If there is no paper in the feeder, load a sheet, and then select to clear the message and continue printing. • Press to clear the message and continue printing.

The printer manually overrides the request, and then prints from an automatically selected tray. • Press , and then press to cancel the print job.

Troubleshooting

Page 127 of the Lexmark xd2 user manual — 31.yy Replace black and color imaging kit
Page 127 · click to enlarge
Page 127

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Remove packaging material

Check for and remove any packaging materials from the toner cartridges.

Unsupported USB device, please remove

Remove the unrecognized USB device.

Unsupported USB hub, please remove

Remove the unrecognized USB hub.

Unplug and change mode

Make sure that the camera is in a valid mode for PictBridge

30 <color> Toner Cart Missing

Insert the missing toner cartridge to clear the message and continue printing. If the message appears again, remove the cartridge, and then insert it until it clicks into place.

31.yy Defective <color> Cartridge

Try one or more of the following:

  • Open and close the top cover.
  • Remove the specified toner cartridge, and then insert it until it clicks into place.
  • Turn the printer off, wait ten seconds, and then turn the printer on.
  • Replace the specified toner cartridge with a new one.

31.yy Defective Imaging Kit

Try one or more of the following:

  • Open and close the top cover.
  • Remove the imaging kit, and then insert it until it clicks into place.
  • Turn the printer off, wait ten seconds, and then turn the printer on.
  • Replace the defective imaging kit with a new one.

31.yy Replace black and color imaging kit

Replace the black and color imaging kit.

Troubleshooting

Page 128 of the Lexmark xd2 user manual — 38 Memory full
Page 128 · click to enlarge
Page 128

32.yy Replace Unsupported <color> Cartridge

Replace the unsupported toner cartridge with a supported one.

34 Short paper

The paper in the selected tray is too short for the current print job.

Try one or more of the following:

  • Load the appropriate paper in the tray.
  • Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
  • Check tray length and width guides and make sure the paper is properly loaded in the tray.
  • For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
  • For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper size and type.
  • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.
  • Cancel the current print job.

35 Insufficient memory to support Resource Save feature

The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save, clear the message, and continue printing.

37 Insufficient memory to collate job

Try one or more of the following:

  • Press the arrow buttons until Continue appears, and then press to print the portion of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:

  • Press the arrow buttons until Continue appears, and then press to stop the defragment operation and continue printing.
  • Delete fonts, macros, and other data in printer memory.
  • Install additional printer memory.

38 Memory full

Try one or more of the following:

  • Press the arrow buttons until Continue appears, and then press to clear the message.
  • Cancel the current print job.

Troubleshooting

Page 129 of the Lexmark xd2 user manual — 54 Standard <x> software error
Page 129 · click to enlarge
Page 129
  • Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:

  • Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
  • Cancel the current print job.
  • Install additional printer memory.

51 Defective flash detected

Try one or more of the following:

  • Replace the defective flash memory card.
  • Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.

52 Not enough free space in flash memory for resources

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory.
  • Press , and then press to cancel printing.

53 Unformatted flash detected

Try one or more of the following:

  • Press the arrow buttons until Continue appears, and then press to continue printing.
  • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Standard network software error

The printer detects unformatted flash memory when the power is turned on.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Turn the power off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.
  • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Standard <x> software error

The printer detects that a network port is installed, but cannot communicate with it. The printer disables all communication to the associated network interface.

Troubleshooting

Page 130 of the Lexmark xd2 user manual — 59 Incompatible tray <x>
Page 130 · click to enlarge
Page 130

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Turn the power off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

56 Standard USB port disabled

Try one or more of the following:

  • The printer discards any data received through the USB port. Press to clear the message and continue printing.
  • Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Try one or more of the following:

  • Turn the printer off, and then remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on.
  • Press to clear the message and continue printing.

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional tray(s).

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

59 Incompatible tray <x>

Only options designed specifically for this printer are supported.

Try one or more of the following:

  • Remove the specified tray.
  • Press the arrow buttons until Continue appears, and then press to clear the message and continue printing without using the specified tray.

Troubleshooting

Page 131 of the Lexmark xd2 user manual — Printer control panel display is blank or displays only diamonds
Page 131 · click to enlarge
Page 131

82 Replace waste toner box

Replace the waste toner bottle, and then press to clear the message.

82 Waste toner box missing

Replace the waste toner bottle, and then press to clear the message.

82 Waste toner box nearly full

Press to clear the message.

88 Cartridge is low

Press to clear the message.

88 Replace <color> cartridge

The specified toner cartridge is exhausted.

1 Replace the specified toner cartridge.

2 Touch Continue to clear the message and continue printing.

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electronic equipment plugged into the outlet is working.
  • The printer is turned on. Check the printer power switch.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.
  • All options are properly installed.
  • The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.

Solving printing problems

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

Troubleshooting

Page 132 of the Lexmark xd2 user manual — M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED
Page 132 · click to enlarge
Page 132

If Ready does not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the USB drive is supported.

Jobs do not print

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready or Power Saver appears on the display before sending a job to print.

C HECK TO SEE IF THE STANDARD EXIT BIN IS FULL

Remove the stack of paper from the standard exit bin.

C HECK TO SEE IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED

  • Verify that you are using the correct printer software.
  • If you are using a USB port, make sure you are running a supported operating system and using compatible printer software.

M AKE SURE THE INTERNAL PRINT SERVER IS INSTALLED PROPERLY AND WORKING

  • Make sure the internal print server is properly installed and that the printer is connected to the network.
  • Print a network setup page and check that the status shows Connected . If the status is Not Connected , check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark Web site at http://support.lexmark.com.

MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLE

For more information, visit the Lexmark Web site at http://support.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Troubleshooting

Page 133 of the Lexmark xd2 user manual — L OAD THE SAME SIZE AND TYPE OF PAPER
Page 133 · click to enlarge
Page 133

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.

C HANGE THE P AGE P ROTECT SETTING TO O FF

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Setup Menu appears, and then press .

4 Press the arrow buttons until Print Recovery appears, and then press .

5 Press the arrow buttons until Page Protect appears, and then press .

6 Press the arrow buttons until Off appears, and then press .

Job prints from the wrong tray or on the wrong paper

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

Incorrect characters print

MAKE SURE THE PRINTER IS NOT IN HEX TRACE MODE

If Ready Hex appears on the display, then you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.

Tray linking does not work

These are possible solutions. Try one or more of the following:

L OAD THE SAME SIZE AND TYPE OF PAPER

  • Load the same size and type of paper in each tray to be linked.
  • Move the paper guides to the correct positions for the paper size loaded in each tray.

Troubleshooting

Page 134 of the Lexmark xd2 user manual — Unexpected page breaks occur
Page 134 · click to enlarge
Page 134

USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS

  • Print a menu settings page and compare the settings for each tray.
  • If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From the Finishing menu or Print Properties, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory or an optional hard disk.

Unexpected page breaks occur

Increase the Print Timeout value:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Timeouts appears, and then press .

5 Press the arrow buttons until Print Timeout appears, and then press .

6 Press the arrow buttons until the desired value appears, and then press .

Troubleshooting

Page 135 of the Lexmark xd2 user manual — R ESET THE PRINTER
Page 135 · click to enlarge
Page 135

Solving option problems

Settings chosen from the software program or application can change or override settings chosen from the printer control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control panel.

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait for about 10 seconds, and then turn the printer on.

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer from the wall outlet.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, reinstall it.

M AKE SURE THE OPTION IS SELECTED

From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser.

Paper trays

These are possible solutions. Try one or more of the following:

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Open the paper tray.

2 Check for paper jams or misfeeds.

3 Make sure paper guides are aligned against the edges of the paper.

4 Make sure the paper tray closes properly.

R ESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

Troubleshooting

Page 136 of the Lexmark xd2 user manual — C HECK FOR SERVICE MESSAGES
Page 136 · click to enlarge
Page 136

M AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY

If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet.

Memory card

Make sure the memory card is securely connected to the printer system board.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Multipurpose feeder

These are possible solutions. Try one or more of the following:

C HECK THE MULTIPURPOSE FEEDER

Make sure the 650-sheet duo drawer (multipurpose feeder) is installed properly.

C LEAR ANY JAMS

Clear any jams in the multipurpose feeder.

C HECK THE POWER CORD CONNECTION

Make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The outlet has power.

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see “Paper and specialty media guidelines” on page 48.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct position for the size loaded.

C HECK FOR SERVICE MESSAGES

If a service message appears, turn the printer off, wait about 10 seconds, and then turn the printer back on. If the error recurs, then call for service. You may have a printer part that requires adjustment or replacement.

Troubleshooting

Page 137 of the Lexmark xd2 user manual — Page that jammed does not reprint after you clear the jam
Page 137 · click to enlarge
Page 137

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see “Paper and specialty media guidelines” on page 48.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

1 Clear jammed paper from the entire paper path.

2 Press to clear the message and continue printing.

Page that jammed does not reprint after you clear the jam

In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:

1 Press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General settings appears, and then press .

4 Press the arrow buttons until Print Recovery appears, and then press .

5 Press the arrow buttons until Jam Recovery appears, and then press .

6 Press the arrow buttons until On or Auto appears, and then press .

Troubleshooting

Page 138 of the Lexmark xd2 user manual — T HE TONER MAY BE LOW
Page 138 · click to enlarge
Page 138

Solving print quality problems

Isolating print quality problems

To help isolate print quality problems, print the print quality test pages:

1 Turn the printer off.

2 From the printer control panel, press and hold and the right arrow button while turning the printer on.

3 Release both buttons when the clock animation appears.

The printer performs its power-on sequence, and then Config Menu appears.

4 Press the arrow buttons until Prt Quality Pgs appears, and then press .

The pages are formatted, Printing Quality Test Pages appears, and then the pages print. The message remains on the display until all the pages print.

5 After the print quality test pages print, press the arrow buttons until Exit Config Menu appears, and then press .

The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, then call for service. You may have a printer part that requires adjustment or replacement.

Blank pages

These are possible solutions. Try one or more of the following:

P ACKING MATERIAL MAY BE ON THE TONER CARTRIDGE

Remove the toner cartridge and make sure the packing material is properly removed. Reinstall the toner cartridge.

T HE TONER MAY BE LOW

When 88 Cartridge Low appears, order a new toner cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Troubleshooting

Page 139 of the Lexmark xd2 user manual — Dark lines
Page 139 · click to enlarge
Page 139

Clipped images

Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Characters have jagged or uneven edges

These are possible solutions. Try one or more of the following:

C HECK THE PRINT QUALITY SETTINGS

  • Change the Print Resolution setting in the Quality menu to 600 dpi, 1200 Image Q, 1200 dpi, or 2400 Image Q.
  • Enable Enhance Fine Lines in the Quality menu.

M AKE SURE DOWNLOADED FONTS ARE SUPPORTED

If you are using downloaded fonts, then verify that the fonts are supported by the printer, the host computer, and the software program.

Dark lines

ABCDE

ABCDE ABCDE

Troubleshooting

Page 140 of the Lexmark xd2 user manual — C HECK THE PAPER SIZE SETTING
Page 140 · click to enlarge
Page 140

The imaging kit may be defective.

If Black and color imaging kit life warning orBlack imaging kit life warning appears, replace the imaging kit.

Gray background

ABCDE

ABCDE ABCDE

C HECK THE T ONER D ARKNESS SETTING

Select a lighter Toner Darkness setting:

  • From the printer control panel Quality menu, change the setting.
  • For Windows users, change the setting from Print Properties.
  • For Macintosh users, change the setting from the Print dialog.

Incorrect margins

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Troubleshooting

Page 141 of the Lexmark xd2 user manual — Print irregularities
Page 141 · click to enlarge
Page 141

Light colored line, white line, or incorrectly colored line

These are possible solutions. Try one or more of the following:

A TONER CARTRIDGE MAY BE DEFECTIVE

Replace the defective toner cartridge.

T HE IMAGING KIT MAY BE DEFECTIVE

Replace the imaging kit.

Paper curl

These are possible solutions. Try one or more of the following:

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Print irregularities

Troubleshooting

Page 142 of the Lexmark xd2 user manual — C ALIBRATE THE COLOR
Page 142 · click to enlarge
Page 142

These are possible solutions. Try one or more of the following:

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

C HECK THE PAPER

Avoid textured paper with rough finishes.

T HE TONER MAY BE LOW

When 88 <color> cartridge low appears or when the print becomes faded, replace the toner cartridge.

T HE FUSER MAY BE WORN OR DEFECTIVE

Replace the fuser.

Print is too dark

These are possible solutions. Try one or more of the following:

C ALIBRATE THE COLOR

The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

Troubleshooting

Page 143 of the Lexmark xd2 user manual — T HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Page 143 · click to enlarge
Page 143

3 Press the arrow buttons until Quality menu appears, and then press .

4 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too high.

  • For Windows users: from Print Properties, select Print Quality and then select More Print Quality Options to change these settings.
  • From the printer control panel Quality menu, change these settings.
  • For Macintosh users: 1 Choose File > Print . 2 Locate the drop-down box under the Orientation pictures, and then click the down button. 3 Click Printer Features . 4 Change the settings for Toner Darkness, Brightness, and Contrast.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER

Avoid textured paper with rough finishes.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

Troubleshooting

Page 144 of the Lexmark xd2 user manual — C HECK THE PAPER
Page 144 · click to enlarge
Page 144

Print is too light

These are possible solutions. Try one or more of the following:

C ALIBRATE THE COLOR

The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Quality menu appears, and then press .

4 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too low.

  • For Windows users: from Print Properties, select Print Quality and then select More Print Quality Options to change these settings.
  • For Macintosh users: 1 Choose File > Print . 2 Locate the drop-down box under the Orientation pictures, and then click the down button. 3 Click Printer Features . 4 Change the settings for Toner Darkness, Brightness, and Contrast.
  • From the printer control panel Quality menu, change these settings.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER

Avoid textured paper with rough finishes.

Troubleshooting

Page 145 of the Lexmark xd2 user manual — Repeating defects
Page 145 · click to enlarge
Page 145

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray.

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

M AKE SURE C OLOR S AVER IS SET TO O FF

Color Saver may be set to On.

T HE TONER MAY BE LOW

When 88 <color> Cartridge Low appears or when the print becomes faded, replace the toner cartridge.

A TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

Repeating defects

REPEATING MARKS OCCUR REPEATEDLY ONLY IN ONE COLOR AND MULTIPLE TIMES ON A PAGE

Replace the developer unit if the defects occur every 43.9 mm (1.7 in.)

Replace the imaging kit if the defects occur every:

  • 34.6 mm (1.4 in.)
  • 94.2 mm (3.71 in.)
Show 5 more labels / short text on this page
) · ) · ) · ) · Troubleshooting
Page 146 of the Lexmark xd2 user manual — I S THERE TONER IN THE PAPER PATH ?
Page 146 · click to enlarge
Page 146
  • The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
  • The Print Defects menu prints a diagnostic list of problems. For more information, see “Menu Settings Page menu” on page 73.

Skewed print

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Solid color pages

The printer may need to be serviced. For more information, contact Customer Support.

Toner fog or background shading appears on the page

These are possible solutions. Try one or more of the following:

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

I S THERE TONER IN THE PAPER PATH ?

Contact Customer Support.

Troubleshooting

Page 147 of the Lexmark xd2 user manual — I S THERE TONER IN THE PAPER PATH ?
Page 147 · click to enlarge
Page 147

Toner rubs off

These are possible solutions. Try one or more of the following:

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

C HECK THE P APER T EXTURE SETTING

From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray.

Toner specks

These are possible solutions. Try one or more of the following:

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

I S THERE TONER IN THE PAPER PATH ?

Contact Customer Support.

Troubleshooting

Page 148 of the Lexmark xd2 user manual — Color misregistration
Page 148 · click to enlarge
Page 148

Transparency print quality is poor

C HECK THE TRANSPARENCIES

Use only transparencies recommended by the printer manufacturer.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE ABCDE ABCDE

Replace the black and color imaging kit.

Solving color quality problems

This section helps answer some basic color-related questions and describes how some of the features provided in the printer control panel Quality menu can be used to solve typical color problems.

Color misregistration

ABCDE ABCDE ABCDE ABCDE

Color has shifted outside of the appropriate area or has been superimposed over another color area.

These are possible solutions. Try one or more of the following:

Troubleshooting

Page 149 of the Lexmark xd2 user manual — FAQ about color printing
Page 149 · click to enlarge
Page 149

R EMOVE AND REINSTALL THE TONER CARTRIDGES

Remove the toner cartridges, and then reinstall them.

C ALIBRATE THE COLOR

The printer will automatically calibrate the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Quality menu appears, and then press .

4 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

FAQ about color printing

What is RGB color?

Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.

What is CMYK color?

Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.

How is color specified in a document to be printed?

Software programs typically specify document color using RGB or CMYK color combinations. Additionally, they allow users to modify the color of each object in a document. For more information, see the software program Help topics.

How does the printer know what color to print?

When a user prints a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

Should I use PostScript or PCL emulation printer software? What settings should I use for the best color?

The PostScript driver is strongly recommended for best color quality. The default settings in the PostScript driver provide the preferred color quality for the majority of printouts.

Troubleshooting

Page 150 of the Lexmark xd2 user manual — Remove and reinstall the toner cartridges
Page 150 · click to enlarge
Page 150

Why doesn't the printed color match the color I see on the computer screen?

The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color-matching problems, see the question, “How can I match a particular color (such as a corporate logo)?”

The printed page appears tinted. Can I adjust the color?

Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.

My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.

What is manual color correction?

When manual color correction is enabled, the printer employs user-selected color conversion tables to process objects. However, Color Correction must be set to Manual, or no user-defined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).

  • Manual color correction is not useful if the software program does not specify colors with RGB or CMYK combinations. It is also not effective in situations in which the software program or the computer operating system controls the adjustment of colors.
  • The color conversion tables—applied to each object when Color Correction is set to Auto—generate preferred colors for the majority of documents.

To manually apply a different color conversion table:

1 From the Quality menu, select Color Correction, and then select Manual.

2 From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.

Troubleshooting

Page 151 of the Lexmark xd2 user manual — Manual Color menu
Page 151 · click to enlarge
Page 151

Manual Color menu

Object type Color conversion tables

  • Vivid —Produces brighter, more saturated colors and may be applied to all incoming color formats.
  • sRGB Display —Produces an output that approximates the colors displayed on a computer monitor. Black toner usage is optimized for printing photographs.
  • Display—True Black —Produces an output that approximates the colors displayed on a computer monitor. Uses only black toner to create all levels of neutral gray.
  • sRGB Vivid —Provides an increased color saturation for the sRGB Display color correction. Black usage is optimized for printing business graphics.
  • Off —No color correction is implemented.
  • US CMYK —Applies color correction to approximate the SWOP (Specifications for Web Offset Publishing) color output.
  • Euro CMYK —Applies color correction to approximated EuroScale color output.
  • Vivid CMYK —Increases the color saturation of the US CMYK color correction setting.
  • Off —No color correction is implemented.

How can I match a particular color (such as a corporate logo)?

From the printer Quality menu, nine types of Color Samples sets are available. These are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates a multiple-page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

By examining Color Samples sets, a user can identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to utilize the selected color conversion table for the particular object.

Selecting which Color Samples set to use for a particular color-matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented.

Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist in which the software program or the computer operating system adjusts the RGB or CMYK combinations specified in the program through color management. The resulting printed color may not be an exact match of the Color Samples pages.

What are detailed Color Samples and how do I access them?

Detailed Color Samples sets are available only through the Embedded Web Server of a network printer. A detailed Color Samples set contains a range of shades (displayed as colored boxes) that are similar to a user-defined RGB or CMYK value. The likeness of the colors in the set are dependent on the value entered in the RGB or CMYK Increment box.

Show 7 more labels / short text on this page
RGB Image · RGB Text · RGB Graphics · CMYK Image · CMYK Text · CMYK Graphics · Troubleshooting
Page 152 of the Lexmark xd2 user manual — Contacting Customer Support
Page 152 · click to enlarge
Page 152

To access a detailed Color Samples set from the Embedded Web Server:

1 Open a Web browser.

2 In the address bar, type the network printer IP address.

3 Click Configuration.

4 Click Color Samples.

5 Click Detailed Options to narrow the set to one color range.

6 When the Detailed Options page appears, select a color conversion table.

7 Enter the RGB or CMYK color number.

8 Enter an Increment value from 1–255.

9 Click Print to print the detailed Color Samples set.

Contacting Customer Support

When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Troubleshooting

Page 153 of the Lexmark xd2 user manual — Edition notice
Page 153 · click to enlarge
Page 153

Notices

Product information

Product name:

Lexmark C540n, C543dn, C544n, C544dn, C544dw, C546dtn

Machine type:

Model(s):

210, 230, 410, 430, 43W, 439, n01, n02, dnw, xd1, xd2, dn1, dn2, gd1, gd2, dw1, dw2, dt1, dt2, gt1, gt2

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

If you don't have access to the Internet, you can contact Lexmark by mail:

Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA

© 2010 Lexmark International, Inc.

All rights reserved.

June 2011

Page 154 of the Lexmark xd2 user manual — Federal Communications Commission (FCC) compliance information statement
Page 154 · click to enlarge
Page 154

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Page 155 of the Lexmark xd2 user manual — Static sensitivity notice
Page 155 · click to enlarge
Page 155

Modular component notice

Wireless-equipped models contain the following modular component(s):

Lexmark regulatory type/model LEX-M04-001; FCC ID:IYLLEXM04001; IC:2376A-M04001

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

Printing 48 dBA · Ready Inaudible

Page 156 of the Lexmark xd2 user manual — Laser advisory label
Page 156 · click to enlarge
Page 156

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature 15.6-32.2°C (60-90°F)

Shipping and storage temperature -40-43.3°C (-40-110°F)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Lexmark xd2 — Laser advisory label diagram (page 156)
Fig. 96 · Laser advisory label
Page 157 of the Lexmark xd2 user manual — Total energy usage
Page 157 · click to enlarge
Page 157

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard-copy output from electronic inputs. 480 W (C540, C543); 500 W (C544, C546)

Copying The product is generating hard-copy output from hard-copy original documents.

N/A

Scanning The product is scanning hard-copy documents. N/A

Ready The product is waiting for a print job. 34 W (C540, C543); 36 W (C544, C546)

Power Saver The product is in energy-saving mode.

Off The product is plugged into a wall outlet, but the power switch is turned off.

0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Factory default Power Saver Timeout for this product (in minutes): 20 minutes (C540, C543); 30 minutes (C544, C546)

By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Page 158 of the Lexmark xd2 user manual — Industry Canada (Canada)
Page 158 · click to enlarge
Page 158

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Page 159 of the Lexmark xd2 user manual — Notice to users in the European Union
Page 159 · click to enlarge
Page 159

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the

Page 160 of the Lexmark xd2 user manual — Notice to users in the European Union
Page 160 · click to enlarge
Page 160

Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Page 161 of the Lexmark xd2 user manual — Limited warranty service
Page 161 · click to enlarge
Page 161

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Statement of Limited Warranty

Lexmark C540n, C543dn, C544n, C544dn, C544dw, C546dtn

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

Page 162 of the Lexmark xd2 user manual — Limitation of liability
Page 162 · click to enlarge
Page 162

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Page 163 of the Lexmark xd2 user manual — LEXMARK SOFTWARE LICENSE AGREEMENT
Page 163 · click to enlarge
Page 163

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.

LEXMARK SOFTWARE LICENSE AGREEMENT

This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.

Page 164 of the Lexmark xd2 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 164 · click to enlarge
Page 164

This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.

The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.

IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this License Agreement:

a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,

executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or

installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License Agreement. d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the

Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the

Page 165 of the Lexmark xd2 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 165 · click to enlarge
Page 165

time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so shall be void. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program. 9 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark.

Page 166 of the Lexmark xd2 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 166 · click to enlarge
Page 166

18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this License Agreement (except to the extent such extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.

Page 168 of the Lexmark xd2 user manual — Table of contents
Page 168 · click to enlarge
Page 168

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Page 169 of the Lexmark xd2 user manual — Table of contents
Page 169 · click to enlarge
Page 169

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Page 170 of the Lexmark xd2 user manual — Table of contents
Page 170 · click to enlarge
Page 170

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Page 171 of the Lexmark xd2 user manual — Table of contents
Page 171 · click to enlarge
Page 171

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Thank you for choosing this printer!p.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Understanding the printer control panelp.12Additional printer setupp.13Installing internal optionsp.13Available optionsp.13Accessing the system board to install internal optionsp.14Installing a memory cardp.17Installing a flash memory cardp.19Installing hardware optionsp.21Installing an optional tray or drawerp.21Attaching cablesp.23Verifying printer setupp.23Printing a menu settings pagep.23Printing a network setup pagep.24Setting up the printer softwarep.24Installing printer softwarep.24Updating available options in the printer driverp.25Setting up wireless printingp.26Information you will need to set up the printer on a wireless networkp.26Installing the printer on a wireless network (Windows)p.26Installing the printer on a wireless network (Macintosh)p.28Installing the printer on a wired networkp.30Minimizing your printer's environmental impactp.34Saving paper and tonerp.34Using recycled paper and other office papersp.34Conserving suppliesp.35Saving energyp.36Using Eco-Modep.36Reducing printer noisep.36Adjusting Power Saverp.37Recyclingp.38Recycling Lexmark productsp.38Recycling Lexmark packagingp.38Returning Lexmark cartridges for reuse or recyclingp.38Loading paper and specialty mediap.39Linking and unlinking traysp.39Linking traysp.39Unlinking traysp.39Assigning a custom paper type name to a trayp.39Setting the paper size and typep.40Configuring Universal paper settingsp.40Loading the standard 250-sheet trayp.41Loading the 650-sheet duo drawerp.43Using the multipurpose feederp.44Using the manual feederp.46Paper and specialty media guidelinesp.48Paper guidelinesp.48Paper characteristicsp.48Selecting paperp.49Selecting preprinted forms and letterheadp.49Storing paperp.49Supported paper sizes, types, and weightsp.50Paper sizes supported by the printerp.50Paper types supported by the printerp.51Paper types and weights supported by the printerp.52Paper capacitiesp.54Printingp.55Printing a documentp.55Printing a documentp.55Printing specialty documentsp.56Tips on using letterheadp.56Tips on using transparenciesp.57Tips on using envelopesp.58Tips on using labelsp.58Tips on using card stockp.59Printing from a flash drivep.60Printing photos from a PictBridge-enabled digital camerap.61Printing information pagesp.61Printing a font sample listp.61Printing a directory listp.62Printing the print quality test pagesp.62Canceling a print jobp.62Canceling a print job from the printer control panelp.62Canceling a print job from the computerp.62Understanding printer menusp.64Menus listp.64Supplies menup.64Paper menup.65Default Source menup.65Paper Size/Type menup.65Paper Texture menup.68Paper Weight menup.70Paper Loading menup.71Custom Types menup.72Universal Setup menup.73Reportsp.73Menu Settings Page menup.73Device Statistics menup.74Network Setup Page menup.74Print Fonts menup.74Print Defects menup.74Asset Report menup.74Network/Portsp.75Active NIC menup.75Network menup.75Reports menup.76Network Card menup.76TCP/IP menup.77IPv6 menup.78Wireless menup.78AppleTalk menup.79USB menup.79Settingsp.81General Settings menup.81Setup menup.83Finishing menup.84Quality menup.86Utilities menup.89PDF menup.89PostScript menup.90PCL Emul menup.90Image menup.93PictBridge menup.93Flash drive menup.94Maintaining the printerp.95Storing suppliesp.95Checking the status of suppliesp.95Checking the status of supplies from the printer control panelp.95Checking the status of supplies from a network computerp.95Ordering suppliesp.96Ordering toner cartridgesp.96Ordering imaging kitsp.97Ordering a waste toner bottlep.98Replacing suppliesp.98Replacing the waste toner boxp.98Replacing a black and color imaging kitp.101Replacing a toner cartridgep.107Replacing a developer unitp.109Cleaning the exterior of the printerp.114Moving the printerp.115Before moving the printerp.115Moving the printer to another locationp.115Shipping the printerp.115Administrative supportp.116Restoring the factory default settingsp.116Using the Embedded Web Serverp.116Setting up e-mail alertsp.117Configuring supply notificationsp.117Copying printer settings to other printersp.117Clearing jamsp.119Avoiding jamsp.119Understanding jam numbers and locationsp.120200–202 and 230 paper jamsp.121231 and 235 paper jamsp.12324x paper jamp.124250 paper jamp.124Troubleshootingp.125Understanding printer messagesp.125Calibratingp.125Close doorp.125Insert Tray <x>p.125Reload printed pages in Tray <x>p.125Load <input src> with <custom type name>p.125Load <input src> with <custom string>p.125Load <input src> with <size>p.125Load <input src> with <type> <size>p.126Load single sheet feeder with <custom type name>p.126Load single sheet feeder with <custom string>p.126Load single sheet feeder with <size>p.126Load single sheet feeder with <type> <size>p.126Remove paper from standard output binp.127Remove packaging materialp.127Unsupported USB device, please removep.127Unsupported USB hub, please removep.127Unplug and change modep.12730 <color> Toner Cart Missingp.12731.yy Defective <color> Cartridgep.12731.yy Defective Imaging Kitp.12731.yy Replace black and color imaging kitp.12732.yy Replace Unsupported <color> Cartridgep.12834 Short paperp.12835 Insufficient memory to support Resource Save featurep.12837 Insufficient memory to collate jobp.12837 Insufficient memory for Flash Memory Defragment operationp.12838 Memory fullp.12839 Complex page, some data may not have printedp.12951 Defective flash detectedp.12952 Not enough free space in flash memory for resourcesp.12953 Unformatted flash detectedp.12954 Standard network software errorp.12954 Standard <x> software errorp.12956 Standard USB port disabledp.13058 Too many flash options installedp.13058 Too many trays attachedp.13059 Incompatible tray <x>p.13082 Replace waste toner boxp.13182 Waste toner box missingp.13182 Waste toner box nearly fullp.13188 Cartridge is lowp.13188 Replace <color> cartridgep.131Solving basic printer problemsp.131Solving printing problemsp.131Printer control panel display is blank or displays only diamondsp.131Error message about reading USB drive appearsp.132Jobs do not printp.132Make sure the printer is ready to printp.132Check to see if the standard exit bin is fullp.132Check to see if the paper tray is emptyp.132Make sure the correct printer software is installedp.132Make sure the internal print server is installed properly and workingp.132Make sure you are using a recommended USB, serial, or Ethernet cablep.132Make sure printer cables are securely connectedp.132Job takes longer than expected to printp.133Reduce the complexity of the print jobp.133Change the Page Protect setting to Offp.133Job prints from the wrong tray or on the wrong paperp.133Check the paper type settingp.133Incorrect characters printp.133Make sure the printer is not in Hex Trace modep.133Tray linking does not workp.133Load the same size and type of paperp.133Use the same Paper Size and Paper Type settingsp.134Large jobs do not collatep.134Make sure Collate is set to Onp.134Reduce the complexity of the print jobp.134Make sure the printer has enough memoryp.134Unexpected page breaks occurp.134Solving option problemsp.135Option does not operate correctly or quits after it is installedp.135Reset the printerp.135Check to see if the option is connected to the printerp.135Make sure the option is installedp.135Make sure the option is selectedp.135Paper traysp.135Make sure the paper is loaded correctlyp.135Reset the printerp.135Make sure the paper tray is installed correctlyp.136Memory cardp.136Flash memory cardp.136Multipurpose feederp.136Check the multipurpose feederp.136Clear any jamsp.136Check the power cord connectionp.136Check the paperp.136Check the paper guidesp.136Check for service messagesp.136Solving paper feed problemsp.137Paper frequently jamsp.137Check the paperp.137Make sure there is not too much paper in the paper trayp.137Check the paper guidesp.137The paper may have absorbed moisture due to high humidityp.137Paper jam message remains after jam is clearedp.137Page that jammed does not reprint after you clear the jamp.137Solving print quality problemsp.138Isolating print quality problemsp.138Blank pagesp.138Packing material may be on the toner cartridgep.138The toner may be lowp.138Clipped imagesp.139Check the guidesp.139Check the paper size settingp.139Characters have jagged or uneven edgesp.139Check the print quality settingsp.139Make sure downloaded fonts are supportedp.139Dark linesp.139Gray backgroundp.140Check the Toner Darkness settingp.140Incorrect marginsp.140Check the paper guidesp.140Check the paper size settingp.140Light colored line, white line, or incorrectly colored linep.141A toner cartridge may be defectivep.141The imaging kit may be defectivep.141Paper curlp.141Check the paper type settingp.141The paper has absorbed moisture due to high humidityp.141Print irregularitiesp.141The paper may have absorbed moisture due to high humidityp.142Check the paper type settingp.142Check the paperp.142The toner may be lowp.142The fuser may be worn or defectivep.142Print is too darkp.142Calibrate the colorp.142Check the darkness, brightness, and contrast settingsp.143The paper has absorbed moisture due to high humidityp.143Check the paperp.143Check the paper type settingp.143The imaging kit may be worn or defectivep.143Print is too lightp.144Calibrate the colorp.144Check the darkness, brightness, and contrast settingsp.144The paper has absorbed moisture due to high humidityp.144Check the paperp.144Check the paper type settingp.145Make sure Color Saver is set to Offp.145The toner may be lowp.145A toner cartridge may be defectivep.145The imaging kit may be worn or defectivep.145Repeating defectsp.145Repeating marks occur repeatedly only in one color and multiple times on a pagep.145Skewed printp.146Check the paper guidesp.146Check the paperp.146Solid color pagesp.146Toner fog or background shading appears on the pagep.146The imaging kit may be worn or defectivep.146Is there toner in the paper path?p.146Toner rubs offp.147Check the paper type settingp.147Check the Paper Texture settingp.147Toner specksp.147The imaging kit may be worn or defectivep.147Is there toner in the paper path?p.147Transparency print quality is poorp.148Check the transparenciesp.148Check the paper type settingp.148Uneven print densityp.148Solving color quality problemsp.148Color misregistrationp.148Remove and reinstall the toner cartridgesp.149Calibrate the colorp.149FAQ about color printingp.149Contacting Customer Supportp.152Noticesp.153Product informationp.153Edition noticep.153UNITED STATES GOVERNMENT RIGHTSp.154Trademarksp.154Federal Communications Commission (FCC) compliance information statementp.154Modular component noticep.155Noise emission levelsp.155Waste from Electrical and Electronic Equipment (WEEE) directivep.155Static sensitivity noticep.155ENERGY STARp.156Temperature informationp.156Laser noticep.156Laser advisory labelp.156Power consumptionp.157Product power consumptionp.157Power Saverp.157Off modep.157Total energy usagep.157European Community (EC) directives conformityp.158Regulatory notices for wireless productsp.158Exposure to radio frequency radiationp.158Industry Canada (Canada)p.158Notice to users in the European Unionp.159Statement of Limited Warrantyp.161LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.163Indexp.167
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark xd2

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark xd2

Be the first to ask — other owners or our team will answer.

Original document

Lexmark xd2 manual PDF

171 pages·5.2 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…