Instruction/ maintenance manual of the product X945 Lexmark
Go to page of 8
Lexmark™ X94x Clearing Jams Guide Clearing jams Avoiding jams The following hints can help you avoid jams: • Use only recommended paper or specialty media. For more information, see the Card Stock & Label Guide available on the Lexmark Web site at www.
2 Lift the green lever, and then pull the paper up and toward you. Note: Make sure all paper fragments are removed. 3 Push the green lever down. 4 Close Door A. 5 Touch Continue . 230–231 paper jams 1 Open Door A by lifting the release latch and lowering the door.
6 Remove the jammed paper. 7 Close Door B. 8 Touch Continue . 241 paper jam 1 Open Door C. 2 Pull the paper down and toward you. Note: Make sure all paper fragments are removed. 3 Close Door C. 4 Open Tray 1, and then remove any crumpled paper from the tray.
4 Clear crumpled paper from Trays 2–4. a Open Tray 2, and then remove any crumpled paper. b Close Tray 2. c Open Tray 3, and then remove any crumpled paper. d Close Tray 3. e Open Tray 4, and then remove any crumpled paper. f Open the inside cover, and then remove any jammed paper.
280–282 paper jams 1 Open Cover F. 2 Remove the jammed paper. Note: If the paper jam on the right is difficult to remove, rotate the knob clockwise. 3 Close Cover F.
7 Lift the inside cover. If the paper is jammed in the rollers, rotate Knob G8 clockwise, and then remove the jammed paper. 8 Close Door G. 9 Touch Continue . 284–286 paper jams 1 Open Door H. 2 Remove the jammed paper. 3 Close Door H. 4 Touch Continue .
4 Open the staple cover. 5 Remove the jammed staple, and then close the cover. 6 Place the staple cartridge into the upper stapler. 7 Open the lower staple drawer. 8 Remove the staple cartridge identified on the display. 9 Remove the jammed staples, and then place the staple cartridge into the stapler.
10 Close the staple drawer. 11 Close Door G. 12 Touch Continue . 290–295 paper jams 1 Remove all original documents from the ADF. 2 Open the ADF cover, and then remove any jammed paper. 3 Raise the sheet guard, and then remove any jammed paper. Note: If the jammed paper cannot be remove easily, rotate the paper advance wheel to the left.
An important point after buying a device Lexmark X945 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lexmark X945 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lexmark X945 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lexmark X945 you will learn all the available features of the product, as well as information on its operation. The information that you get Lexmark X945 will certainly help you make a decision on the purchase.
If you already are a holder of Lexmark X945, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lexmark X945.
However, one of the most important roles played by the user manual is to help in solving problems with Lexmark X945. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lexmark X945 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
