
User's Guide
Machine type(s):
Model(s):
576, 776


Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.
Use care when you replace a lithium battery.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.
Refer service or repairs, other than those described in the user documentation, to a professional service person.
Safety information 7

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
SAVE THESE INSTRUCTIONS.
Safety information 8

Learning about the printer 9
Finding information about the printer

Learning about the printer 10
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

Learning about the printer 11

CAUTION—TIPPING HAZARD: Floor‑mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high‑capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
You can configure your basic printer by adding up to four 550‑sheet optional drawers and a 2000‑sheet high‑capacity feeder. A caster base and a spacer are supported in any configurations.
Spacers are nonfunctional trays that can be used to add height to a printer stack. Spacers must be:
For information on installing the spacers, see the instruction sheet that came with the hardware.

Learning about the printer 12


Learning about the printer 13

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
You can use the ADF or the scanner glass to scan documents.
The Automatic Document Feeder (ADF) can scan multiple pages, including duplex pages. When using the ADF:
The scanner glass can be used to scan or copy single pages or book pages. When using the scanner glass:

Learning about the printer 14

4 GHI 5 JKL 6 MNO
7 PQR 8 STU 9 WXYZ
1 Display View printing, e‑mailing, copying, and faxing options, as well as status and error messages.
2 Sleep button Enable Sleep Mode or Hibernate Mode.
The following are the statuses of the indicator light and the Sleep button:
for 1.9 seconds in pulsing pattern. • Operating in Hibernate mode – The indicator light is unilluminated. – The Sleep button is blinking amber for 0.10 of a second, then goes completely unilluminated
for 1.9 seconds in pulsing pattern.
The following actions wake the printer from Sleep mode:
3 Keypad Enter numbers, letters, or symbols.
Use the To

Learning about the printer 15
4 Dial pause button
7 Stop button Stop all printer activity.
Return to the home screen.
10 USB port Connect a flash drive to the printer.
Use the To · 5 Indicator light · 8 Home button

Understanding the home screen 16
Understanding the home screen
When the printer is turned on, the display shows a basic screen, referred to as the home screen. Touch the home screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or to respond to messages.

Copy Access the Copy menus and make copies.
E-mail Access the E-mail menus and send e‑mails.
Fax Access the Fax menus and send fax.
Access the printer menus.
FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server.
USB or USB Thumbdrive View, select, print, scan, or e‑mail photos and documents from a flash drive.
Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links.
Held Jobs Display all current held jobs.
Touch To

Understanding the home screen 17
Other buttons that may appear on the home screen:
Search held jobs Search on any of the following items:
Release Held Fax Access the list of held faxes.
Lock Device Open a password entry screen. Enter the correct password to lock the printer control panel.
Unlock Device Open a password entry screen. Enter the correct password to unlock the printer control panel.
Cancel Jobs Open the Cancel Jobs screen. The Cancel Jobs screen shows three headings: Print, Fax, and Network.
The following options are available under the Print, Fax, and Network headings:
Each heading has a list of jobs shown in a column under it which can show only three jobs per screen. If more than three jobs exist in a column, then an arrow appears enabling you to scroll through the jobs.
Change Language Launch the Change Language pop‑up window that lets you change the primary language of the printer.
Touch To

Understanding the home screen 18
A menu trail line is located at the top of each menu screen. This feature shows the path taken to arrive at the current menu. Touch any of the underlined words to return to that menu.
Number of Copies is not underlined since this is the current screen. If you touch an underlined word on the Number of Copies screen before the Number of Copies is set and saved, then the selection is not saved, and it does not become the default setting.
Attendance message alert If an attendance message affects a function, then this icon appears and the red indicator light blinks.
The IP address of your network printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server so you can view and remotely configure printer settings even when you are not physically near the printer.

Copy It Submit changes made in the copy settings and start the copy job.
Scroll to the right.

Understanding the home screen 19
Scroll to the left.
Return to the home screen.
Select a higher value.
Select a lower value.
Exit from the current screen.
Open a context-sensitive help dialog.
Save a setting.
Reset values on the screen.

Setting up and using the home screen applications 20
The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.
2 Open a Web browser, and then type the printer IP address in the address field.
The Embedded Web Server page appears.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings > Home screen customization.
A list of basic printer functions appears.
3 Select the check boxes to specify which icons appear on the printer home screen.
4 Click Submit.
The selected icons appear on the home screen. For information about each of these icons, see “Understanding the home screen” on page 16.

Setting up and using the home screen applications 21
Your printer comes with preinstalled home screen applications. To use these applications, activate and set up these applications using the Embedded Web Server. For more information about accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 20.
For detailed information about configuring and using the home screen applications, visit the Lexmark Web site at http://support.lexmark.com.
The application helps you simplify and streamline work processes by letting you quickly find and print frequently used online forms directly from the home screen.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Device Solutions > Solutions (eSF) > Forms and Favorites.
3 Define the bookmarks, and then customize the settings.
4 Click Apply.
To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.
The application lets you capture a digital image of a hard‑copy document and route it to a shared network folder. You can define up to 30 unique folder destinations.
Icon Description · Icon Description

Setting up and using the home screen applications 22
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Device Solutions > Solutions (eSF) > Scan to Network.
3 Specify the destinations, and then customize the settings.
4 Click Apply.
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display.
The application lets you customize your touch‑screen settings and store those preferences in a flash drive. Each time you want to copy, fax, or scan, insert the flash drive into the USB port of the printer. All your personal preferences are automatically uploaded, including job settings, home screen preferences, and address book.
To set up My MFP, insert a flash drive into the USB port of the printer, and then follow the instructions on the printer display to run the setup wizard.
To use My MFP, insert the flash drive into the USB port of the printer when you want to copy, fax, or scan.
The Web Services‑Scan application lets you scan documents at the network printer, and then send the scanned image to your computer. WS‑Scan is a Microsoft application that is similar to Scan to Network, but has the capability of sending the scanned image to a Windows‑based application. To learn more about WS‑Scan, see the Microsoft documentation.
Icon Description · Icon Description

Setting up and using the home screen applications 23
This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the network printer.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Device Solutions > Solutions (eSF) > Remote Operator Panel.
3 Select the Enabled check box, and then customize the settings.
4 Click Apply.
To use the application, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch VNC Applet.
You can export configuration settings into a text file, and then import it to apply the settings to other printers.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings or Configuration.
3 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
4 From Installed Solutions, click the name of the application you want to configure.
5 Click Configure > Export.
6 Follow the instructions on the computer screen to save the configuration file, and then type a unique file name or use the default name.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings or Configuration.
3 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
4 From Installed Solutions, click the name of the application you want to configure.

Setting up and using the home screen applications 24
5 Click Configure > Import.
6 Browse to the saved configuration file that was exported from a previously configured printer, and then load or preview it.

Additional printer setup 25
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Additional printer setup 26
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Remove the system board cover. a Turn the screws on the cover counterclockwise to loosen them, but do not remove them.


Additional printer setup 27
b Slide the cover slightly up until each screw is in the keyhole.

c Pull the cover to remove it.
2 Locate the appropriate connector on the system board.

Additional printer setup 28


3 Reattach the system board cover.

Additional printer setup 29
a Align the keyholes with the screws.

b Slide the cover down, and then turn each screw on the cover clockwise to tighten.


Additional printer setup 30
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
An optional memory card can be purchased separately and attached to the system board.
1 Access the system board.
For more information, see “Accessing the system board” on page 26.
2 Unpack the memory card.
3 Open the memory card connector latches.

Additional printer setup 31
4 Align the notch (1) on the memory card with the ridge (2) on the connector.

5 Push the memory card straight into the connector until it clicks into place, and then push the latches to firmly attach the card into the connector.

6 Reattach the system board cover.

Additional printer setup 32
The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.
For more information, see“Accessing the system board” on page 26.
2 Unpack the card.
3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the system board.

4 Push the card firmly into place.

5 Reattach the system board cover.

Additional printer setup 33
The system board supports one optional Lexmark Internal Solutions Port (ISP).
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.
For more information, see “Accessing the system board” on page 26.
2 Unpack the ISP kit.

2 Screws for the ISP solution
3 Screw for the plastic bracket
1 ISP solution · 4 Plastic bracket

Additional printer setup 34
3 Locate the appropriate holes on the system board where the posts of the plastic tee will be aligned.

4 Remove the screws, and then remove the metal cover from the ISP opening.


Additional printer setup 35
5 Attach the ISP solution to the system board. a Align the posts of the plastic tee to the holes on the system board. b Hold the edges of the ISP and guide it to the opening on the system board cage, and then gently allow it to rest
on the plastic tee.

c Use the provided screw to attach the plastic bracket to the ISP solution.


Additional printer setup 36
6 Connect the ISP solution interface cable into the color‑coded receptacle on the system board.

7 Firmly connect the ISP solution to the system board cage using the two screws.

8 Reattach the system board cover.

Additional printer setup 37
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.
For more information, see “Accessing the system board” on page 26.
2 Unpack the printer hard disk.
3 Locate the appropriate holes on the system board where the posts of the plastic tee will be aligned.

Additional printer setup 38
a Using a flathead screwdriver, loosen the screws. b Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.

c Install the printer hard disk onto the ISP:
1 Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk to the holes in the ISP. 2 Press down on the printer hard disk until the standoffs are in place.

d Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Additional printer setup 39

a Hold the edges of the printed circuit board assembly, and then align the standoffs of the printer hard disk to
the holes in the system board. Press down on the printer hard disk until the standoffs are in place.


Additional printer setup 40
b Use the two provided screws to attach the printer hard disk mounting bracket.

c Insert the plug of the printer hard disk interface cable into the receptacle of the system board.

4 Reattach the system board cover.

Additional printer setup 41
1 Access the system board.
For more information, see “Accessing the system board” on page 26.
2 Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

3 Remove the screws that connect the printer hard disk to the system board cage.


Additional printer setup 42
4 Remove the printer hard disk by pulling it upward to unseat the standoffs.

5 Set the printer hard disk aside.
6 Reattach the system board cover.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Install the printer and any optional drawers in the following order:
For information on installing an optional drawer, see the setup documentation that came with the option.

Additional printer setup 43
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
1 Unpack the optional drawer, and then remove all packing material.
2 Place the drawer near the printer.
3 Turn off the printer.
4 Align the printer with the drawer, and then lower the printer into place.

Additional printer setup 44

5 Turn the printer back on.

Additional printer setup 45
1 Open the access door by pulling it out to the right.

2 Match the appropriate cable to the corresponding port.

4 USB printer port

Additional printer setup 46
3 Close the access door, and then neatly align the cable to the left.

1 Close all open software programs.
2 Insert the Software and Documentation CD.
If the installation dialog screen does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Click Install, and then follow the instructions on the computer screen.
1 Close all open applications.
2 Insert the Software and Documentation CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
a Click

Additional printer setup 47
3 Double-click the software installer package, and then follow the instructions on the computer screen.
1 Go to the Lexmark Web site at http://support.lexmark.com.
2 Navigate to:
SUPPORT & DOWNLOADS > select your printer > select your operating system
3 Download the printer driver, and then install the printer software.
When the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.
1 Open the printers folder:
, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.
c Press Enter, or click OK.
2 Select the printer.
3 Right‑click the printer, and then select Properties.
4 Click the Configuration tab.
5 Click Update Now ‑ Ask Printer or manually add any installed hardware options under Configuration Options.
6 Click Apply.
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer > Options & Supplies > Driver
2 Add any installed hardware options, and then click OK.
In Mac OS X version 10.4
1 From the Finder, navigate to:
Go > Applications > Utilities
2 Double‑click Printer Setup Utility or Print Center.
3 Select the printer.
a Click

Additional printer setup 48
4 From the Printers menu, choose Show Info.
5 Add any installed hardware options, and then click Apply Changes.
Make sure you have the following information before setting up the printer on a wireless network:
Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key
If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. or – WPA or WPA2 preshared key or passphrase
WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – No security
If your wireless network does not use any type of security, then you will not have any security information.
If you are installing the printer on an 802.1X network using the advanced method, then you may need the following:
Before installing the printer on a wireless network, make sure:

Additional printer setup 49
1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.


Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the computer screen.
2 Insert the Software and Documentation CD.
3 Click Install, and then follow the instructions on the computer screen.
4 Select Wireless connection when asked to choose a connection type.
5 From the Wireless Configuration dialog, select Guided Setup (Recommended).

Additional printer setup 50
6 Temporarily connect a USB cable between the computer on the wireless network and the printer.

7 Follow the instructions on the computer screen.
1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.


2 Locate the printer MAC address. a From the printer control panel, navigate to:
> Reports > > Network Setup Page > or
> Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC).

Additional printer setup 51
1 Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences > Network > AirPort
In Mac OS X version 10.4
From the Finder, navigate to:
Applications > Internet Connect > AirPort
2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y's are the last six digits of the MAC address located on the MAC address sheet.
3 Open a Web browser.
4 From the Bookmarks menu, select Show or Show All Bookmarks.
5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.
6 From the Embedded Web Server, navigate to where the wireless settings information are stored.
1 Type the network name (SSID) in the appropriate field.
2 Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).
3 Select the type of security you want to use to protect the wireless network.
4 Enter the security information necessary for the printer to connect to the wireless network.
5 Click Submit.
6 Open the AirPort application on the computer:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences > Network > AirPort
In Mac OS X version 10.4
From the Finder, navigate to:
Applications > Internet Connect > AirPort
7 From the Network pop‑up menu, select the name of the wireless network.
To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.
1 Install a printer driver file on the computer: a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

Additional printer setup 52
c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.
All necessary applications are installed in the computer. f Click Close when installation is complete.
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then click the IP tab. 3 Type the IP address of the printer in the address field, and then click Add.
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, choose Add, and then click IP Printer. 4 Type the IP address of the printer in the address field, and then click Add. b For AppleTalk printing:
In Mac OS X version 10.5
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.
These instructions apply to Ethernet and fiber optic network connections.

Additional printer setup 53
1 Insert the Software and Documentation CD.
If the installation screen does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe, where D is the letter of the CD or DVD drive.
c Press Enter, or click OK.
2 Click Install, and then follow the instructions on the computer screen.
3 Select Ethernet connection, and then click Continue.
4 Attach the appropriate cable to the computer and to the printer when instructed to do so.
5 Select the printer from the list, and then click Continue.
6 Follow the instructions on the computer screen.
1 Allow the network DHCP server to assign an IP address to the printer.
3 Install the printer drivers, and then add the printer. a Install a printer driver file on the computer:
1 Insert the Software and Documentation CD, and then double‑click the installer package for the printer. 2 Follow the instructions on the computer screen. 3 Select a destination, and then click Continue. 4 From the Easy Install screen, click Install. 5 Type the user password, and then click OK. All the necessary applications are installed in the computer. 6 Click Close when installation is complete. b Add the printer:
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then click the IP tab. 3 Type the printer IP address in the address field, and then click Add.
a Click

Additional printer setup 54
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add, and then click IP Printer. 4 Type in the printer IP address in the address field, and then click Add. • For AppleTalk printing:
In Mac OS X version 10.5
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.

Additional printer setup 55
When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.
, or click Start and then click Run.
2 In the Start Search or Run dialog, type control printers.
3 Press Enter, or click OK.
The printer folder opens.
4 Locate the printer that has changed.
5 Right‑click the printer.
6 Click Properties > Ports tab.
7 Select the port from the list, and then click Configure Port.
8 Type the new IP address in the “Printer Name or IP Address” field.
9 Click OK > Close.
Add the printer:
1 Click

Additional printer setup 56
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then click the IP tab. 3 Type the printer IP address in the address field, and then click Add.
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add, and then click IP Printer. 4 Type the printer IP address in the address field, and then click Add.
In Mac OS X version 10.5
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click the Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.
In serial printing, data is transferred one bit at a time. Although serial printing is usually slower than parallel printing, it is the preferred option when there is a great deal of distance between the printer and computer or when an interface with a better transfer rate is not available.

Additional printer setup 57
After installing the serial or communication (COM) port, configure the printer and the computer so they can communicate. Make sure you have connected the serial cable to the COM port on your printer.
1 Set the parameters in the printer: a From the printer control panel, navigate to the menu with port settings. b Locate the menu with serial port settings.
c Make any necessary changes to the serial settings. d Save the new settings, and then print a menu settings page.
2 Install the printer driver: a Insert the Software and Documentation CD.
If the installation screen does not appear after a minute, then launch the CD manually::
, or click Start and then click Run. 2 In the Start Search or Run box, type D:\setup.exe, where D is the letter of the CD or DVD drive. 3 Press Enter, or click OK. b Click Advanced Options > Custom Install.
c Follow the instructions on the computer screen d From the Configure Printer Connection dialog, select Connect through a port discovered on your computer,
and then select a port. e If the port is not in the list, then click Refresh.
or Navigate to: Add port > select a port type > enter necessary information > OK f Click Continue.
1 If you want to add another printer, then click Add Another. 2 If you want to make changes, then select a printer, and then click Edit. 3 Follow the instructions on the computer screen. g Click Finish.
3 Set the COM port parameters:
After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.
, or click Start and then click Run. 2 In the Start Search or Run box, type devmgmt.msc. 3 Press Enter, or click OK. b Look for Ports, and then click + to expand the list of available ports.
c Right‑click the COM port where you attached the serial cable to your computer (example: COM1). d Click Properties. e On the Port Settings tab, set the serial parameters to the same serial parameters in the printer.
Check the serial heading of the menu settings page for the printer settings. f Click OK, and then close all the windows. g Print a test page to verify printer installation.
1 Click · 1 Click

Additional printer setup 58
When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:
From the home screen, navigate to:
> Reports > Menu Settings Page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.
1 From the home screen, navigate to:
> Reports > Network Setup Page
2 Check the first section of the network setup page, and confirm that the status is Connected.
If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Loading paper and specialty media 59
The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 253 and “Storing paper” on page 80.
From the home screen, navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type > Submit
The Universal Paper Size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:
1 From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select a unit of measure
2 Touch Portrait Width or Portrait Height > select the width or height > Submit.
The printer has one standard 550‑sheet tray (Tray 1) and may have up to four optional 550‑sheet trays including the special media tray. For narrow paper sizes such as A6 and envelopes, use the special media tray. For more information, see “Loading the optional 550‑sheet special media tray” on page 63.
1 Pull the tray completely out.

Loading paper and specialty media 60

2 Squeeze and slide the width guide to the correct position for the paper size you are loading.


Loading paper and specialty media 61

3 Squeeze and slide the length guide to the correct position for the paper size you are loading.


Loading paper and specialty media 62
4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the paper stack toward the back of the tray with the recommended printable side faceup.
One‑sided printing Two‑sided (Duplex) printing
L E T T E R H E A D
L E T T E R H E A D


Loading paper and specialty media 63
6 Insert the tray.

7 From the printer control panel, verify the paper size and paper type setting for the tray based on the paper you loaded.
The optional 550‑sheet special media tray (Tray 2) supports narrow paper sizes such as envelopes and A6.

Loading paper and specialty media 64

1 Pull the tray completely out.


Loading paper and specialty media 65
2 Squeeze and slide the primary length guide toward you until it stops.


Loading paper and specialty media 66
3 Squeeze and slide the width guide to the correct position for the paper size you are loading.



Loading paper and specialty media 67
4 Squeeze and slide the secondary length guide to the correct position for the paper size you are loading.

5 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

6 Load the paper stack with the recommended printable side faceup.

Loading paper and specialty media 68

7 Insert the tray.

8 From the printer control panel, verify the paper size and paper type setting for the tray based on the paper you loaded.

Loading paper and specialty media 69
1 Pull the tray out.
2 Pull up and slide the width guide to the correct position for the paper size you are loading.

3 Unlock the length guide.


Loading paper and specialty media 70
4 Push the length guide release latch to raise the length guide. Slide the guide to the correct position for the paper size you are loading, and then lock the guide.

5 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.



Loading paper and specialty media 71

7 Insert the tray.
The multipurpose feeder can hold approximately:

Loading paper and specialty media 72


1 Press the tray release latch to the left, and then pull the multipurpose feeder down.

2 Gently pull the extension out until it is fully extended.


Loading paper and specialty media 73
3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

* Avoid touching the printable side of transparencies. Be careful not to scratch them.
4 Load the paper or specialty media. Slide the stack into the multipurpose feeder until it comes to a stop.


Loading paper and specialty media 74

5 From the printer control panel, verify the paper size and paper type setting for the feeder based on the paper you loaded.
When the paper size and paper type for any trays are the same, the printer will link those trays. When one linked tray becomes empty, paper will feed from the next linked tray. It is recommended to give all unique paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in will not automatically link.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Paper Menu.
3 Change the paper size and type settings of the tray so that they do not match the settings of any other tray, and then click Submit.
1 Open a Web browser, and then type the printer IP address in the address field.

Loading paper and specialty media 75
2 Click Settings > Paper Menu.
3 Change the paper type and size settings of the tray so that they match the settings of any other tray, and then click Submit.
If the printer is on a network, then use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Navigate to:
Settings > Paper Menu > Custom Name > type a name > Submit
3 Navigate to:
Custom Types > select a paper type > Submit
Assign a custom paper type name to a tray when linking or unlinking trays.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Paper Menu > Custom Names.
3 Type a name for the paper type, and then click Submit.
4 Select a custom type, and then verify that the correct paper type is associated with the custom name.
If the printer is on a network, then you can use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer.
1 Open a Web browser, and then type the printer IP address in the address field.

Loading paper and specialty media 76
2 Click Settings > Paper Menu > Custom Types.
3 Select a custom name you want to configure, select a paper or specialty media type, and then click Submit.

Paper and specialty media guidelines 77
Paper guidelines
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.
The printer can automatically feed paper weights from 60 to 220 g/m2 (16 to 58 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2 (20 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 (24 lb) or heavier paper.
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.
Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.
The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.
Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.
For 60 to 135 g/m2 (16 to 36 lb bond) paper, grain long paper is recommended. For papers heavier than 135 g/m2, grain short is recommended.

Paper and specialty media guidelines 78
Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.
The following paper types are not recommended for use with the printer:
Using the appropriate paper prevents jams and helps ensure trouble‑free printing.
To help avoid paper jams and poor print quality:
Use these guidelines when selecting preprinted forms and letterhead:
Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Paper and specialty media guidelines 79
Preprinted papers such as letterhead must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions.
As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.
While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:
Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.
Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.
Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.
Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:
1 Minimize paper consumption.
2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.
3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Paper and specialty media guidelines 80
Test results indicate that the following paper types are at risk for use with laser printers:
For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.
Use these paper storage guidelines to help avoid jams and uneven print quality:

Paper and specialty media guidelines 81
The following tables provide information on standard and optional paper input sources and the types of paper they support.

X X 2 2 2 X X X 2
2 1 X 2 2 2 X 2,3 2
1 Source supports paper size with size sensing.
2 Source supports paper size without size sensing.
3 Paper size is supported if set to US.
4 Paper size is supported if set to metric.
5 Paper size is supported if its length is between 8.27 in. (210 mm) and 14 in. (355.6 mm); and its width is between 5.5 in. (139.7 mm) and 8.5 in. (215.9 mm).
6 This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software program.
7 Turn Size Sensing off to support universal sizes that are close to standard paper or specialty media sizes.

Paper and specialty media guidelines 82
Paper size and dimension
Standard 550‑sheet tray
Optional 550‑sheet tray
Optional 2000‑sheet high‑capacity feeder
Optional 550‑sheet specialty media drawer
Duplex ADF Scanner glass
139.7 x 215.9 mm (5.5 x 8.5 in.)
2 1 X 1 2 X 5 2 2
148 x 210 mm to 215.9 x 355.6 mm (5.83 x 8.27 in. to 8.5 x 14 in.)
X X X 2 X
76.2 x 127 mm (3 x 5 in.) to 215.9 x 1219.2 mm (8.5 x 48 in.)
7 3/4 Envelope (Monarch)
X X X 2 2 X 2 X X X
98.4 x 190.5 mm (3.875 x 7.5 in.)
X X X 2 2 X 2 X X X
98.4 x 226.1 mm (3.875 x 8.9 in.)
X X X 2 1 X 2 X X X
104.8 x 241.3 mm (4.12 x 9.5 in.)
X X X 2 1 X 2 X X X
110 x 220 mm (4.33 x 8.66 in.)
X X X 2 1 X 2 X X X
162 x 229 mm (6.38 x 9.01 in.)
X X X 2 2 X 2 X X X
176 x 250 mm (6.93 x 9.84 in.)
X X X 2 2 X 2 X X X
85.7 x 165 mm to 215.9 x 355.6 mm (3.375 x 6.50 in. to 8.5 x 14 in.)
1 Source supports paper size with size sensing.
2 Source supports paper size without size sensing.
3 Paper size is supported if set to US.
4 Paper size is supported if set to metric.
5 Paper size is supported if its length is between 8.27 in. (210 mm) and 14 in. (355.6 mm); and its width is between 5.5 in. (139.7 mm) and 8.5 in. (215.9 mm).
6 This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software program.
7 Turn Size Sensing off to support universal sizes that are close to standard paper or specialty media sizes.

Paper and specialty media guidelines 83
The printer supports 60–220‑g/m2 (16–58‑lb) paper weights.

Paper type Standard or optional 550‑sheet tray

The use of print preview and the selection of desired printing preferences such as duplex, margins and paper size can ensure that the print job output will appear as desired.
Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 21.
1 From the printer home screen, navigate to:
Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings
2 Depending on your printer model, touch
, or Submit.
1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.
2 Send the print job:
a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.
c Adjust the settings, if necessary. d Click OK > Print.
a Customize the settings in the Page Setup dialog:
1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:
1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.
Printing 84 · ,

From the home screen, navigate to:
> Settings > Print Settings > Quality Menu > Print Mode > Black Only > Submit
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Print Settings > Quality Menu > Toner Darkness.
3 Adjust the toner darkness setting.
4 Click Submit.
The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Print Settings > Setup Menu.
3 From the Printer Usage list, select Max Speed or Max Yield.
4 Click Submit.
1 From the home screen, navigate to:
> Settings > Print Settings > Setup Menu
2 From the Printer Usage list, select Max Speed or Max Yield.
3 Touch Submit.
Printing 85

For the list of supported mobile devices and to download a compatible mobile printing application, visit http://lexmark.com/mobile.
1 Insert a flash drive into the USB port.
Printing 86

2 From the printer control panel, touch the document you want to print.
3 Touch the arrows to specify the number of copies for printing, and then touch Print.
Flash drive File type
Documents:
Images:
Printing 87

1 From the printer control panel, navigate to:
> Security > Confidential Print
Print job type Description
Confidential Lets you hold print jobs in the computer until you enter the PIN from the printer control panel
Verify Lets you print one copy of a print job while the printer holds the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory once all copies are printed.
Reserve Lets you store print jobs for printing at a later time. The print jobs are held until deleted from the Held Jobs menu.
Repeat Lets you print and store print jobs in the printer memory for reprinting.
2 Touch Submit.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Print and Hold.
4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.
5 Click OK or Print.
Printing 88

1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.
3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.
4 Click OK or Print.
1 From the home screen, navigate to:
> Reports > Print Fonts
2 Touch PCL Fonts or PostScript Fonts.
A directory list shows the resources stored in a flash memory or on the printer hard disk.
From the home screen, navigate to:
> Reports > Print Directory
Printing 89

Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
Print samples on the envelopes being considered for use before buying large quantities.
Printing 90

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.
When printing on labels:
releasing hazardous emissions.
Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.
Printing 91

1 Touch Cancel Jobs on the touch screen, or press
on the keypad.
2 Touch the job you want to cancel, and then touch Delete Selected Jobs.
1 Open the printers folder:
, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.
c Press Enter, or click OK.
2 Double‑click the printer icon.
3 Select the print job you want to cancel.
4 From the keyboard, press Delete.
In Mac OS X version 10.5 or later:
1 From the Apple menu, choose System Preferences > Print & Fax > Open Print Queue.
2 From the printer window, select the print job you want to cancel.
3 From the icon bar at the top of the window, click the Delete icon.
In Mac OS X version 10.4:
1 From the Finder, navigate to:
Go > Applications > Utilities
2 Double‑click Print Center or Printer Setup Utility.
3 Double‑click the printer icon.
4 From the printer window, select the print job you want to cancel.
5 From the icon bar at the top of the window, click Delete.
Printing 92 · a Click


Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine clippings).
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 From the printer control panel, press to start copying.
1 Load an original document faceup, short edge first into the ADF.
2 Adjust the paper guides.
3 From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying 93

1 Place an original document facedown on the scanner glass in the upper left corner.
2 From the home screen, navigate to:
Copy > change the copy settings > Copy It
3 If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4 Touch Finish the Job to return to the home screen.
1 Place a photo facedown on the upper left corner of the scanner glass.
2 From the home screen, navigate to:
Copy > Content > Photo >
3 Touch Scan the Next Page or Finish the Job.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
4 Touch Copy to > select the tray that contains transparencies > Copy It.
5 If there are no trays that support transparencies, then select Manual Feeder and then touch
6 Select the desired size of the transparencies, and then select a Manual Feeder type.
7 Load transparencies in the multipurpose feeder, and then touch Copy It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Copying 94 · > Photo/Film > · > Copy It

3 From the home screen, navigate to:
Copy > Copy from > size of the original document > Copy to > Manual Feeder
4 Place the letterhead faceup, top edge first in the multipurpose feeder.
5 Select the size of the letterhead.
6 Navigate to:
Continue > Letterhead > Continue > Copy It
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Allow color copies > Off >
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 On the home screen, touch Copy.
4 Touch Copy from > select the size of the original document >
5 Touch Copy to > select the size of the copy >
6 Touch Copy It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Copying 95 · > Submit

3 From the home screen, navigate to:
Copy > Copy from > size of the original document > Copy to
4 Touch Manual Feeder or select the tray that contains the paper type you want to use.
5 Touch Copy It.
Use the ADF to copy original documents with different paper sizes. Depending on the paper sizes loaded and the “Copy to” and “Copy from” settings, each copy is either printed on mixed paper sizes (Example 1) or scaled to fit a single paper size (Example 2).
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Copy from > Mixed Sizes >
> Copy to > Auto Size Match >
The scanner identifies the different paper sizes as they are scanned. Copies are printed on mixed paper sizes corresponding to the paper sizes of the original document.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Copy from > Mixed Sizes >
> Copy to > Letter >
The scanner identifies the different paper sizes as they are scanned, and then scales the mixed paper sizes to fit on the paper size selected.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 On the home screen, touch Copy.
Copying 96 · > Copy It · > Copy It

4 From the Sides (Duplex) area, touch the button for your preferred duplexing method.
The first number represents sides of the original documents; the second number represents sides of the copy. For example, select 1‑sided to 2‑sided if you have 1-sided original documents and you want 2‑sided copies.
, and then Copy It.
Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The factory default setting for Scale is Auto. If you leave Scale set to Auto, the content of your original document will be scaled to fit the size of the paper onto which you are copying.
To reduce or enlarge a copy:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 On the home screen, touch Copy.
4 From the Scale area, touch the arrows to enlarge or reduce your copies.
Touching “Copy to” or “Copy from” after setting Scale manually changes the scale value back to Auto.
5 Touch Copy It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:

> Copy It.
If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
By default, Collate is set to On. If you do not want to collate your copies, then change the setting to Off:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > enter the number of copies > Collate > Off >
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 From the home screen, navigate to:
Copy > Advanced Options > Separator Sheets

> Copy It.
In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Advanced Options > Paper Saver > select desired output >
The custom copy job or job build is used to combine one or more sets of original documents into a single copy job. Each set may be scanned using different job parameters. When a copy job is submitted and Custom Job is enabled, the scanner scans the first set of original documents using the supplied parameters, and then it scans the next set with the same or different parameters.
The definition of a set depends on the scan source:
For example:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Options > Custom Job > On > Done > Copy It
When the end of a set is reached, the scan screen appears.
Copying 99 · 4 Touch · > Copy It

4 Load the next document faceup, short edge first into the ADF or facedown on the scanner glass, and then touch Scan the Automatic Document Feeder or Scan the flatbed.
5 If you have another document to scan, then repeat the previous step. Otherwise, touch Finish the job.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Advanced Options > Header/Footer
4 Pick an area of the page where you want to place the date and time.
5 Touch Yes or No >
> Copy It.
An overlay message can be placed on each page. The message choices are Urgent, Confidential, Copy, Custom or Draft. To place a message on the copies:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Advanced Options > Overlay > select overlay message >
4 Touch Copy It.
When the ADF begins processing a document, the scanning screen appears. To cancel the copy job, touch Cancel Job on the touch screen.
A “Canceling scan job” screen appears. The ADF clears all pages in the ADF and cancels the job.
Copying 100

Touch Cancel Job on the touch screen.
A “Canceling scan job” screen appears. Once the job is canceled, the copy screen appears.
1 From the home screen, touch Cancel Job, or press
on the keypad.
2 Touch the job you want to cancel.
3 Touch Delete Selected Jobs.
This option opens a screen where you can enter the paper size of the original document.
This option opens a screen where you can enter the paper size and type on which your copies will be printed.
This option allows you to set the number of copies to be printed.
Copying 101

This option creates an image from your copy that is proportionally scaled anywhere between 25% and 400%. Scale can also be set for you automatically.
This option adjusts how light or dark your copies will turn out in relation to the original document.
Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of two-sided original documents, make two-sided copies from one-sided original documents, or make one-sided copies (simplex) from two-sided original documents.
This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The factory default setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you want all the copies of each page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2) (3,3,3).
This option lets you set the original document type and source.
Choose content type from Text, Text/Photo, Photo, or Graphics.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
Copying 102

This option enables or disables color for the scanned image.
Touching the Advanced Options button opens a screen where you can change the following settings:
This option allows the current settings to be saved as a shortcut by assigning a number.
Copying 103


Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine clippings).
You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer. You can type the e‑mail address, use a shortcut number, or use the address book.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings.
3 Under Default Settings, click E-mail/FTP Settings.
4 Click E-mail Settings > Setup E-mail Server.
5 Fill in the fields with the appropriate information.
6 Click Submit.
1 Type the printer IP address into the address field of your Web browser.
E-mailing 104

If you do not know the IP address of the printer, you can:
2 Click Settings > E-mail/FTP Settings > E-mail Settings.
3 Fill in the fields with the appropriate information.
4 Click Submit.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings.
3 Under Other Settings, click Manage Shortcuts > E-mail Shortcut Setup.
4 Type a unique name for the recipient, and then enter the e-mail address.
5 Select the scan settings (Format, Content, Color, and Resolution).
6 Enter a shortcut number, and then click Add.
If you enter a number that is already in use, then you are prompted to select another number.
1 From the home screen, navigate to:
E-mail > Recipient > type an e‑mail address
To create a group of recipients, touch Next address, and then type the next recipient’s e-mail address.
3 Type a unique name for the shortcut, and then touch Done.
4 Verify that the shortcut name is correct, and then touch OK.
If the shortcut name is incorrect, then touch Cancel, and then reenter the information.
E-mailing 105 · 2 Touch

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
4 Enter the e‑mail address, or press
and then enter the shortcut number.
To enter additional recipients, touch Next Address, and then enter the address or shortcut number you want to add.
5 Touch Done > Send It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
, enter the shortcut number using the keypad, and then touch
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
4 Touch Send It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
E-mail >Recipient(s) >
> enter the name of recipient > Browse shortcuts
E-mailing 106 · E-mail > Recipient · 3 Press

4 Touch the name of the recipients.
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add, or search the address book.
5 Touch Done.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, touch E-mail.
4 Type an e‑mail address.
5 Touch Options > Subject.
6 Type the e-mail subject.
7 Touch Done > Message.
8 Type an e-mail message.
9 Touch Done > E-mail It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
E-mail > Recipient > type an e‑mail address > Send as
E-mailing 107

5 Touch E‑mail It.
This option lets you enter the destination of your e-mail. You may enter multiple e‑mail addresses.
This option lets you enter a subject line for your e-mail.
This option lets you enter a message that will be sent with your scanned attachment.
This option lets you customize the attachment file name.
This option opens a screen where you can choose the size of the documents you are going to e-mail.
Adjusts the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Image resolution can be decreased to reduce the e-mail file size.
E-mailing 108

This option sets the output color for the scanned image. Touch to enable or disable color.
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
This option adjusts how light or dark your scanned documents will turn out in relation to the original document.
This option sets the output (PDF, TIFF, JPEG or XPS) for the scanned image.
E-mailing 109

This option lets you change the Sides (Duplex), Orientation, and Binding.
This option displays the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears.
Touching this button opens a screen where you can change the following settings:
E-mailing 110


Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine clippings).
The following connection methods may not be applicable in all countries or regions.

Faxing 111

Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: station name (identification of the business, other entity, or individual sending the message) and station number (telephone number of the sending fax machine, business, other entity, or individual).
To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web Server and then enter the Settings menu.
When the printer is turned on for the first time or if the printer has been off for an extended time, a series of start‑up screens appear. If the printer has fax capabilities, then the following screens appear:
Fax Name or Station Name Fax Number or Station Number
1 When Fax Name or Station Name appears, enter the name to be printed on all outgoing faxes.
2 After entering the Fax Name or Station Name, touch Submit.
3 When Fax Number or Station Number appears, enter the printer fax number.
4 After entering the Fax Number or Station Number, touch Submit.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings > Fax Settings > Analog Fax Setup.
3 In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4 In the Fax Number or Station Number field, enter the printer fax number.
5 Click Submit.
Faxing 112

Equipment and service options Fax connection setup
Connect directly to the telephone line. See “Connecting to an analog telephone line” on page 113.
Connect to a Digital Subscriber Line (DSL or ADSL) service. See “Connecting to a DSL service” on page 113.
Connect to a Private Branch eXchange (PBX) or Integrated Services Digital Network (ISDN) system.
See “Connecting to a PBX or ISDN system” on page 114.
Use a Distinctive Ring service. See “Connecting to a distinctive ring service” on page 114.
Connect through an adapter used in your area. See “Connecting to an adapter for your country or region” on page 115.
If your telecommunications equipment uses a US‑style (RJ11) telephone line, then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to an active analog telephone wall jack.

If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to the DSL filter.
Faxing 113

3 Connect the DSL filter cable to an active telephone wall jack.

If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to the port designated for fax and telephone use.
A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the printer LINE port .
2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Faxing 114

3 Change the Distinctive Rings setting to match the setting you want for the printer to answer:
> Settings > Fax Settings > Analog Fax Settings > Distinctive Rings b Select the pattern setting you want to change, and then touch Submit.
The following countries or regions may require a special adapter to connect the telephone cable to the active telephone wall jack:
For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering machine, telephone, or other telecommunications equipment to the printer.
1 Connect one end of the telephone cable that came with the printer to the printer LINE port
2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone wall jack.

1 Type the printer IP address into the address field of your Web browser.
Faxing 115 · Country/Region

If you do not know the IP address of the printer, you can:
2 Click Settings > Fax Settings > Analog Fax Setup.
3 In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4 In the Fax Number or Station Number field, enter the printer fax number.
5 Click Submit.
You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may have to reset the date and time.
1 Type the printer IP address in the address field of your Web browser.
If you do not know the IP address of the printer, then you can:
2 Click Security > Set Date and Time.
3 In the Set Date & Time field, enter the current date and time.
4 Click Submit.
The printer can be set to automatically adjust for daylight saving time.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Security > Set Date and Time.
3 Click the Automatically Observe DST check box.
4 In the Custom Time Zone Setup section, set the DST start and end dates.
5 Click Submit.
Faxing 116

Instead of entering the entire phone number of a fax recipient on the printer control panel each time you want to send a fax, you can create a permanent fax destination and assign a shortcut number. A shortcut can be created to a single fax number or a group of fax numbers.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings > Manage Shortcuts > Fax Shortcut Setup.
3 Type a unique name for the shortcut, and then enter the fax number.
To create a multiple‑number shortcut, enter the fax numbers for the group.
4 Assign a shortcut number.
If you enter a number that is already in use, then you are prompted to select another number.
5 Click Add.
1 From the home screen, touch Fax, and then enter the fax number.
To create a group of fax numbers, touch Next number, and then enter the next fax number.
3 Type a unique name for the shortcut, and then touch Done.
4 Verify that the shortcut name and number are correct, and then touch OK.
If the name or number is incorrect, then touch Cancel, and then reenter the information.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Faxing 117 · 2 Touch

3 From the home screen, touch Fax.
4 Enter the fax number or a shortcut using the touch screen or keypad.
To add recipients, touch Next Number and then enter the recipient's telephone number or shortcut number, or search the address book.
5 Touch Fax It.
The printer driver fax option allows you to “print to fax,” where the printer will send a queued document as a fax rather than print it. The fax option functions as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.
1 With a document open, click File > Print.
2 Select the printer, and then navigate to:
Properties > Fax tab > Enable fax
3 Enter the recipient fax number(s) in the “Fax number(s)” field.
Fax numbers can be entered manually or by using the Phone Book feature.
4 If necessary, enter a prefix in the Dialing prefix field.
5 Select the appropriate paper size and page orientation.
6 If you want to include a cover page with the fax, then select Include cover page with fax, and enter the appropriate information.
7 Click OK.
Fax shortcuts are just like the speed dial numbers on a telephone or fax machine. A shortcut number (1–99999) can contain a single recipient or multiple recipients.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Faxing 118

, and then enter the shortcut number using the keypad.
4 Touch Fax It.
The address book enables you to search for bookmarks and network directory servers.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 From the home screen, navigate to:
3 Touch Browse shortcuts or, using the virtual keyboard, type the name or part of the name of the person whose fax number you want to find.
4 Touch the name of the person you want to send the fax to, and then touch Done > Fax It.
Settings range from Standard (fastest speed) to Super Fine (slowest speed but best quality).
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Fax > enter the fax number > Options
4 From the Resolution area, touch the arrows to change to the resolution you want.
5 Touch Fax It.
Faxing 119 · 3 Press · Fax >

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Fax > enter the fax number > Options
4 From the Darkness area, touch the arrows to adjust the darkness of the fax.
5 Touch Fax It.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Fax > enter the fax number > Options > Advanced Options > Delayed Send
4 Touch the arrows to adjust the time the fax will be transmitted.
The time is increased or decreased in increments of 30 minutes. If the current time is shown, the left arrow is unavailable.
5 Touch Fax It.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings > Reports > Fax Job Log or Fax Call Log.
1 Type the printer IP address into the address field of your Web browser.
Faxing 120

If you do not know the IP address of the printer, you can:
2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.
1 On the home screen, touch Cancel Jobs.
The Cancel Jobs screen appears.
2 Touch the job or jobs you want to cancel.
Only three jobs appear on the screen; touch the down arrow until the job you want appears, and then touch the job you want to cancel.
3 Touch Delete Selected Jobs.
The Deleting Selected Jobs screen appears, the selected jobs are deleted, and then the home screen appears.
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
Faxing 121

Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
This options increases how closely the scanner examines the document you want to fax. If you are faxing a photo, a drawing with fine lines, or a document with very small text, then increase the Resolution setting. This will increase the amount of time required for the scan and will increase the quality of the fax output.
This option adjusts how light or dark your faxes will turn out in relation to the original document.
This option enables or disables color in faxing.
This option lets you change the Sides (Duplex), Orientation, and Binding settings.
This option displays the first page of the image before it is included in the fax. When the first page is scanned, the scanning is paused and a preview image appears.
Faxing 122

This lets you send a fax at a later time or date.
1 Set up your fax.
2 From the home screen, navigate to:
Delayed Send > enter the date and time you want to send your fax > Done
This setting can be especially useful in sending information to fax lines that are not readily available during certain hours, or when transmission times are cheaper.
Touching the Advanced Options button opens a screen where you can change the following settings:
This option lets you hold received faxes from printing until they are released. Held faxes can be released manually or at a scheduled day or time.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > Fax Settings > Analog Fax Setup > Holding Faxes.
Faxing 123

4 If you selected Scheduled, then continue with the following steps: a Click Fax Holding Schedule. b From the Action menu, select Hold faxes.
c From the Time menu, select the time you want the held faxes released. d From the Day(s) menu, select the day you want the held faxes released.
5 Click Add.
This option lets you print and forward received faxes to a fax number, e‑mail address, FTP site, or LDSS.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings > Fax Settings.
5 In the Forward to Shortcut field, enter the shortcut number where you want the fax forwarded.
6 Click Submit.
Faxing 124

Using Scan to Network
Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server. For more information, see “Setting up Scan to Network” on page 21.

Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine clippings).
The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be used at a time.
Once an FTP destination has been configured by your system support person, the name of the destination becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon.
Instead of typing the entire FTP site address on the printer control panel each time you want to send a document to an FTP server, you can create a permanent FTP destination and assign a shortcut number.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
Scanning 125

2 Click Settings.
3 Under Other Settings, click Manage Shortcuts.
4 Click FTP Shortcut Setup.
5 Enter the appropriate information.
6 Enter a shortcut number.
If you enter a number that is already in use, then you are prompted to select another number.
7 Click Add.
1 From the home screen, navigate to:
FTP > type the FTP address >
> enter a name for the shortcut > Done
2 Verify that the shortcut name and number are correct, and then touch OK. If the name or number is incorrect, then touch Cancel, and then reenter the information.
If you enter a number that is already in use, then you are prompted to select another number.
3 Touch Submit.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
FTP > FTP > type the FTP address > Send It
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
, and then enter the FTP shortcut number.
4 Touch Send It.
Scanning 126 · 3 Press

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the home screen, navigate to:
> enter the name of recipient > Browse shortcuts > name of recipient > Search
This option lets you enter the IP address for the FTP destination.
This option lets you enter the file name of the scanned document.
This option opens a screen where you can choose the size of the documents for FTP sending.
This option sets the output (PDF, TIFF, JPEG or XPS) for the scanned image.
Scanning 127

This option enables or disables color for the scanned image.
This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document. Image resolution can be decreased to reduce the file size.
This option lets you change the Sides (Duplex), Orientation, and Binding.
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
This option displays the first page of the original document before it is scanned completely. When the first page is scanned, the scanning is paused and a preview image appears.
Scanning 128

Touching the Advanced Options button opens a screen where you can change the following settings:

Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine clippings).
The scanner lets you scan documents directly to a computer or a flash drive. The computer does not have to be directly connected to the printer for you to receive Scan-to-PC images. You can scan the document back to the computer over the network by creating a scan profile from the computer and then downloading the profile to the printer.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Scan Profile > Create.
3 Select your scan settings, and then click Next.
4 Select a location on your computer where you want to save the scanned output file.
Scanning 129

5 Enter a scan name.
The scan name is the name that appears in the Scan Profile list on the display.
6 Click Submit.
7 Review the instructions on the Scan Profile screen.
A shortcut number was automatically assigned when you clicked Submit. You can use this shortcut number when you are ready to scan your documents.
a Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
, and then enter the shortcut number using the keypad, or touch Held Jobs on the home screen, and then touch Profiles. d After entering the shortcut number, the scanner scans and sends the document to the directory or program
you specified. If you touched Profiles on the home screen, then locate your shortcut on the list.
8 Return to the computer to view the file.
The output file is saved in the location or launched in the program you specified.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 Insert the flash drive into the USB port on the front of the printer.
The USB Drive home screen appears.
4 Select the destination folder, and then touch Scan to USB drive.
5 Adjust the scan settings.
6 Touch Scan It.
You can use the Lexmark ScanBackTM Utility instead of the Embedded Web Server to create scan‑to‑PC profiles. The ScanBack Utility can be downloaded from the Lexmark Web site home page on http:\\support.lexmark.com.
1 Set up your scan‑to‑PC profile: a Launch the ScanBack Utility. b Select the printer.
If no printers are listed, then contact your system support person, or click Setup to manually search for an IP address or host name. c Follow the instructions on your computer screen to define the type of document being scanned and what kind of output you want to create.
Scanning 130 · c Press

d Select any of the following:
A dialog box appears with your scan profile information and the status of the received images.
2 Scan your original documents: a Load all pages in the ADF or on the scanner glass. b From the printer control panel, navigate to:
Scan/Email > Profiles > select your scan profile > Submit
This option sets the size of the documents you are going to scan. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).
This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document. Image resolution can be decreased to reduce the file size.
This option enables or disables color for the scanned image.
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
Scanning 131

This option adjusts how light or dark your scanned documents will turn out in relation to the original document.
This option lets you change the Sides (Duplex), Orientation, and Binding.
This option displays the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears.
Touching the Advanced Options button opens a screen where you can change the following settings:
Scanning 132

Understanding the printer menus 133
Menus list
Supplies Paper Menu Reports Settings
Network [x] Setup Page
E‑mail Settings
Separator Pick Assembly and Roller
Print Directory Asset Report
Security Network/Ports Help Manage Shortcuts
Parallel [x] Serial [x]
Set Date and Time
A list of installed DLEs (Download Emulators) appears.2
1 Depending on the printer setup, this menu appears as Standard Network or Network [x].
2 This menu appears only when one or more DLEs are installed.

Understanding the printer menus 134
Reset the supply counter for the replacement photoconductor or photoconductors.
All Photoconductors Cyan Photoconductor Magenta Photoconductor Yellow Photoconductor Black Photoconductor
View the status of the cyan toner cartridge.
Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported
View the status of the magenta toner cartridge.
Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported
View the status of the yellow toner cartridge.
Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported

Understanding the printer menus 135
View the status of the black toner cartridge.
Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported
View the status of the cyan photoconductor.
Early Warning Low Replace Missing OK
View the status of the magenta photoconductor.
Early Warning Low Replace Missing OK
View the status of the yellow photoconductor.
Early Warning Low Replace Missing OK
View the status of the black photoconductor.
Early Warning Low Replace Missing OK
Separator Pick Assembly and Roller
VIew the status of the separator pick assembly and roller.
View the status of the waste toner bottle.
Near Full Replace Missing OK

Understanding the printer menus 136
View the status of the fuser.
Early Warning Low Replace Missing OK
View the status of the transfer module.
Early Warning Low Replace Missing OK
Set a default paper source for all print jobs.
Tray [x] MP Feeder Manual Paper Manual Envelope
Specify the paper size loaded in each tray.
A4 A5 JIS B5 Letter Legal Executive Oficio (México) Folio Universal

Understanding the printer menus 137
Specify the type of paper loaded in each tray.
Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]
Specify the paper size loaded in the multipurpose feeder.
A4 A5 A6 JIS B5 Letter Legal Executive Oficio (México) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope
Use To · Tray [x] Type · MP Feeder Size

Understanding the printer menus 138
Specify the type of paper loaded in the multipurpose feeder
Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]
Specify the size of the paper being manually loaded.
A4 A5 A6 JIS B5 Letter Legal Executive Oficio (México) Folio Statement Universal
Use To · MP Feeder Type · Manual Paper Size

Understanding the printer menus 139
Specify the type of paper being manually loaded.
Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Roug/Cotton
Specify the size of the envelope being manually loaded.
7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope
Specify the type of envelope being manually loaded.
Envelope Rough Envelope Custom Type [x]
Determine when the printer selects paper from the multipurpose feeder.

Understanding the printer menus 140
Substitute a specified paper size if the requested paper size is not available.
Off Statement/A5 Letter/A4 All Listed
Specify the relative weight of the plain paper loaded.
Specify the relative weight of the card stock loaded.
Specify the relative weight of the transparencies loaded.
Specify the relative weight of the recycled paper loaded.
Specify the relative weight of the glossy paper loaded.
Specify the relative weight of the heavy glossy paper loaded.
Specify the relative weight of the labels loaded.

Understanding the printer menus 141
Specify the relative weight of the vinyl labels loaded.
Specify the relative weight of the bond paper loaded.
Specify the relative weight of the envelope loaded.
Specify the relative weight of the rough envelope loaded.
Specify the relative weight of the letterhead loaded.
Specify the relative weight of the preprinted paper loaded.
Specify the relative weight of the colored paper loaded.
Specify the relative weight of the paper loaded.
Specify the relative weight of the paper loaded.
Specify the relative weight of the cotton paper loaded.
Specify the relative weight of the custom paper loaded.

Understanding the printer menus 142
Determine and set two‑sided printing for all print jobs that specify Card Stock as the paper type.
Determine and set two‑sided printing for all print jobs that specify Recycled as the paper type.
Determine and set two‑sided printing for all print jobs that specify Glossy as the paper type.
Determine and set two‑sided printing for all print jobs that specify Heavy Glossy as the paper type.
Determine and set two‑sided printing for all print jobs that specify Labels as the paper type.
Determine and set two‑sided printing for all print jobs that specify Vinyl Labels as the paper type.
Determine and set two‑sided printing for all print jobs that specify Bond as the paper type.
Determine and set two‑sided printing for all print jobs that specify Letterhead as the paper type.
Determine and set two‑sided printing for all print jobs that specify Preprinted as the paper type.
Determine and set two‑sided printing for all print jobs that specify Colored as the paper type.
Determine and set two‑sided printing for all print jobs that specify Light as the paper type.

Understanding the printer menus 143
Determine and set two‑sided printing for all print jobs that specify Heavy as the paper type.
Determine and set two‑sided printing for all print jobs that specify Rough or Cotton as the paper type.
Determine and set two‑sided printing for all print jobs that specify Custom [x] as the paper type.
Associate a paper or specialty media type with a user‑defined custom name created in the Embedded Web Server or in MarkVisionTM Professional.
Paper Card Stock Transparency Glossy Labels Vinyl Labels Envelope
Specify a paper type when the Recycled setting is selected in other menus.
Paper Card Stock Transparency Glossy Labels Vinyl Labels Envelope

Understanding the printer menus 144
Custom Scan Size [x]
Specify a custom scan size name, scan sizes, and options. The custom scan size name replaces Custom Scan Size [x] in the printer menus.
Scan Size Name Width
1–11.69 inches (25–297 mm) Height
1–17 inches (25–432 mm) Orientation
Portrait Landscape 2 scans per side Off On
Specify a custom name for a paper type. This name replaces Custom Type [x] in the printer menus.
Specify the unit of measure.
Set the width for a portrait page orientation.
3–48 inches 76–1219 mm
Set the height for a portrait page orientation.
3–48 inches 76–1219 mm

Understanding the printer menus 145
Specify the feed direction.
Short Edge Long Edge
Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.
Device Statistics Print a report containing printer statistics such as supply information and details about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.
Network [x] Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.
Shortcut List Print a report containing information about configured shortcuts.
Fax Job Log Print a report containing information about the last 200 completed faxes.
Fax Call Log Print a report containing information about the last 100 attempted, received, and blocked calls.
Copy Shortcuts Print a report containing information about copy shortcuts.
E‑mail Shortcuts Print a report containing information about e‑mail shortcuts.
Fax Shortcuts Print a report containing information about fax shortcuts.
FTP Shortcuts Print a report containing information about FTP shortcuts.
Profiles List Print a list of profiles stored in the printer.
Use To · Feed Direction · Use To
![Page 146 of the Lexmark X746de user manual — Standard Network or Network [x] menus](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-146.webp?w=400)
Understanding the printer menus 146
Print Fonts Print a report of all the fonts available for the printer language currently set in the printer.
Print Directory Print a list of all the resources stored on an optional flash memory card or in printer hard disk.
Asset Report Print a report containing asset information including the printer serial number and model name. The report contains text and UPC barcodes that can be scanned into an asset database.
Auto [list of network cards]
Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.
Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

Understanding the printer menus 147
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the network input buffer.
Auto 3KB to [maximum size allowed]
Temporarily store print jobs in the printer hard disk before printing. This menu only appears when a formatted disk is installed.
Set the printer to process Macintosh binary PostScript print jobs.
Standard Network Setup OR Network [x] Setup
Display and set the printer network settings.
Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Understanding the printer menus 148
To access the menu, navigate to any of the following:
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.
To access the menu, navigate to any of the following:
View the connection status of the network card.
View Card Speed View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Allow the printer to print a banner page.
To access the menu, navigate to any of the following:
Activate or deactivate TCP/IP.

Understanding the printer menus 149
Set Hostname Set the current TCP/IP host name.
IP Address View or change the current TCP/IP address.
Netmask View or change the current TCP/IP netmask.
Gateway View or change the current TCP/IP gateway.
Specify the DHCP address and parameter assignment setting.
Specify the RARP address assignment setting.
Specify the BOOTP address assignment setting.
Specify the Zero Configuration Networking setting.
Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.
Enable the built-in Web server (Embedded Web Server). When enabled, you can monitor and manage the printer remotely using a Web browser.
WINS Server Address View or change the current WINS server address.
View or change the current DDNS setting
View or change the current mDNS setting.
DNS Server Address View or change the current DNS server address.
View or change the current HTTPS setting.

Understanding the printer menus 150
To access the menu, navigate to any of the following:
Enable IPv6 in the printer.
Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router.
Set Hostname Set the host name.
Enable DHCPv6 in the printer.
To access the menu, navigate to any of the following:
Wi‑Fi Protected Setup (WPS)
Establish a wireless network and enable network security.
Start Push Button Method Start PIN Method
Enable/Disable WPS Auto‑detection
Automatically detect the connection method that an access point with WPS uses—Start Push Button Method or Start PIN Method.

Understanding the printer menus 151
Specify the network mode.
Specify the wireless standard for the wireless network.
802.11b/g 802.11b/g/n
Choose Network Select an available network for the printer to use.
View Signal Quality View the quality of the wireless connection.
View Security Mode View the encryption method for the wireless network.
To access the menu, navigate to any of the following:
Enable or disable AppleTalk support.
View Name Show the assigned AppleTalk name.
View Address Show the assigned AppleTalk address.
Provide a list of AppleTalk zones available on the network.
[list of zones available on the network]

Understanding the printer menus 152
Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.
Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the USB input buffer.
Disabled Auto 3K to [maximum size allowed]
![Page 153 of the Lexmark X746de user manual — Parallel [x] menu](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-153.webp?w=400)
Understanding the printer menus 153
Temporarily store print jobs in the printer hard disk before printing.
Set the printer to process Macintosh binary PostScript print jobs.
Set the network address information for an external print server.
yyy.yyy.yyy.yyy
Set the netmask information for an external print server.
yyy.yyy.yyy.yyy
Set the gateway information for an external print server.
yyy.yyy.yyy.yyy
Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.
![Page 154 of the Lexmark X746de user manual — Parallel [x] menu](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-154.webp?w=400)
Understanding the printer menus 154
Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the parallel input buffer.
Disabled Auto 3K to [maximum size allowed]
Temporarily store print jobs on the printer hard disk before printing.
Enable bidirectional communication through the parallel port.
![Page 155 of the Lexmark X746de user manual — Serial [x] menu](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-155.webp?w=400)
Understanding the printer menus 155
Specify the parallel port protocol.
Determine if the printer honors printer hardware initialization requests from the computer.
Determine if the parallel port data is sampled on the leading or trailing edge of a strobe.
Set the printer to process Macintosh binary PostScript print jobs.
Set the network address information for an external print server.
yyy.yyy.yyy.yyy
Set the netmask information for an external print server.
yyy.yyy.yyy.yyy
Set the gateway information for an external print server.
yyy.yyy.yyy.yyy
![Page 156 of the Lexmark X746de user manual — Serial [x] menu](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-156.webp?w=400)
Understanding the printer menus 156
Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the serial input buffer.
Disabled Auto 3K to [maximum size allowed]

Understanding the printer menus 157
Temporarily store print jobs on the printer hard disk before printing.
Select the hardware and software handshaking settings for the serial port.
Determine whether the printer communicates availability to the computer.
Specify the rate at which data can be received through the serial port.
1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600
Specify the number of data bits sent in each transmission frame.

Understanding the printer menus 158
Set the parity for serial input and output data frames.
Even Odd None Ignore
Determine whether the printer uses the DSR Signal.
Primary SMTP Gateway Specify SMTP server gateway and port information.
Secondary SMTP Gateway Port
5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.
Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.
Set the printer to use SSL for increased security when connecting to the SMTP server.
Specify the type of user authentication required for “scan to e‑mail” privileges.
No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Understanding the printer menus 159
Device‑Initiated E‑mail
Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.
None Use Device SMTP Credentials
User‑Initiated E‑mail
None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User
Edit Backup Password Create a backup password.
Edit Building Blocks Edit the internal accounts, NTLM, various setups, password, and PIN.
Edit Security Templates Add or edit a security template.
Edit Access Controls Control access to printer menus, firmware updates, held jobs, and other access points.

Understanding the printer menus 160
Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.
Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout
Adjust the security settings.
Access controls=”No Security” No Effect Reset factory security defaults
Allow the user to request a server certificate.
Demand Try Allow Never
1–16 Limit the digit length of the personal identification number (PIN).

Understanding the printer menus 161
Limit the number of times an invalid PIN can be entered.
Limit the amount of time a confidential print job stays in the printer before it is deleted.
Off 1 hour 4 hours 24 hours 1 week
Set a time limit on how long the printer stores print jobs.
Off 1 hour 4 hours 24 hours 1 week
Set a time limit on how long the printer stores print jobs needing verification.
Off 1 hour 4 hours 24 hours 1 week
Set a time limit on how long the printer stores print jobs for printing at a later time.
Off 1 hour 4 hours 24 hours 1 week
Disk Wiping erases only print job data in the printer hard disk that are not currently in use by the file system. All permanent data in the printer hard disk are retained, such as downloaded fonts, macros, and held jobs.

Understanding the printer menus 162
Specify the mode for disk wiping.
Set the schedule for disk wiping.
Overwrite the disk space that has been used to hold data from a processed print job. This type of wiping does not erase any information related to an unprocessed print job.
Start now Do not start now
Mark the disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared.
Single pass Multiple pass
Allow the file system to reuse marked disk space without having to wipe it first.
Single pass Multiple pass
Allow the file system to reuse marked disk space without having to wipe it first.
Single pass Multiple pass

Understanding the printer menus 163
Export Log Enable an authorized user to export the security log.
Specify whether audit logs are deleted.
Use To · Delete Log · Yes No

Understanding the printer menus 164
Specify whether and how the audit logs are created.
Yes No Enable Remote Syslog
Yes No Remote Syslog Server
[256 character string] Remote Syslog Port
1–65535 Remote Syslog Method
Normal UDP Stunnel Remote Syslog Facility
0–23 Log full behavior
Wrap over oldest entries E‑mail log then delete all entries Admin’s e-mail address
[256 character string] Digitally sign exports
Off On Severity of events to log
0–7 Remote Syslog non-logged events
No Yes E-mail log cleared alert
No Yes E-mail log wrapped alert
No Yes E-mail % full alert
No Yes % full alert level
1–99 E-mail log exported alert
No Yes E-mail log settings changed alert
No Yes Log line endings
LF (\n) CR (\r) CRLF (\r\n)
Use To · Configure Log · Enable Audit

Understanding the printer menus 165
Current Date and Time View the current date and time settings for the printer.
Manually Set Date and Time Enter the date and time.
Time Zone Select the time zone.
Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.
Custom Time Zone Setup
Select the time zone.
UTC Offset DST Start Week DST Start DayOff DST Start Month DST Start Time DST End Week DST End Day DST End Month DST End Time DST Offset
Enable or disable Network Time Protocol, which synchronizes the clocks of printers on a network.
NTP Server View the NTP server address.
Change the authentication setting to On or Off.

Understanding the printer menus 166
Set the language of the text appearing on the printer display.
English Francais Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese
Minimize the use of energy, paper, or specialty media.
Off Energy Energy/Paper Paper
Specify whether or not the ADF sounds a beep when paper is loaded.

Understanding the printer menus 167
Reduce the amount of noise produced by the printer.
Run the setup wizard.

Understanding the printer menus 168
Specify a language and custom key information for the printer keyboard. The additional tabs enable access to accent marks and symbols from the keyboard.
English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Turkce Korean Custom Key [x] Accents/Symbols Tab
On Off Russian/Polish Tab
On Off Korean Tab
Specify the default paper measurement.
Scan to PC Port Range
Specify a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon.

Understanding the printer menus 169
Specify what is displayed on the upper left and right corners of the home screen.
Left side Right side Custom Text [x]
For the Left side and Right side menus, select from the following options:
None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Cartridge Level Custom Text [x]
[text entry] [x] Cartridge [x] Photoconductor Fuser Transfer Module
For [x] Cartridge, [x] Photoconductor, Fuser, and Transfer Module menus, select from the following options:
Do not display Display Message to Display

Understanding the printer menus 170
Specify what is displayed for Paper Jam, Load Paper, and Service Errors settings.
Waste Toner Bottle Paper Jam Load Paper Service Errors
Select from the following options:
Yes No Type of Message to Display
Default Alternate Default Message
[text entry] Alternate Message
Add or remove icons and buttons that appear on the home screen.
Change Language Copy Copy Shortcuts Fax Fax Shortcuts E‑mail E‑mail Shortcuts FTP FTP Shortcuts Search Held Jobs Held Jobs USB Drive Profiles and Solutions Bookmarks Jobs by user Forms and Favorites
For each icon or button, select from the following options:
Display Do Not Display
Format the printer date.
MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD
Format the printer time.
12 hour A.M./P.M. 24 hour clock
20–100 Specify the brightness of the printer control panel screen.

Understanding the printer menus 171
Set copies from the scanner glass to only one page at a time.
Set the amount of light you want from the standard bin or an optional output bin.
Set the audio volume for the buttons.
Specify whether bookmarks are displayed from the Held Jobs area.
Specify whether image background removal is allowed in copy, fax, e‑mail, FTP, or scan‑to‑USB jobs.
Allow Custom Job Scans
Scan multiple jobs to one file.
Specify how a scanned job should be reloaded if a paper jam occurs in the ADF.
Job level Page level
Web Page Refresh Rate
30–300 Specify the number of seconds between Embedded Web Server refreshes.

Understanding the printer menus 172
Contact Name Specify a contact name for the printer.
Location Specify the location of the printer.
Set an alarm to sound when the printer requires operator intervention.
Alarm Control Cartridge Alarm
For each alarm type, select from the following options:
Specify the number of minutes of inactivity before the printer enters a lower power state.
Set the amount of time in seconds the printer waits after a job is printed before it goes into a reduced power state.
Set the amount of time in seconds the printer waits before returning the printer display to a Ready state.

Understanding the printer menus 173
Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.
Set the amount of time in seconds the printer waits for additional data before canceling a print job.
Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue.
Let the printer automatically continue printing from certain offline situations when not resolved within the specified time period.
Specify whether the printer reprints jammed pages.
Print a page that may not have printed otherwise.

Understanding the printer menus 174
Determine how the printer responds when pressing the Sleep button when the printer is idle.
Sleep Hibernate Do Nothing
Press and Hold Sleep Button
Determine how the printer responds when pressing the Sleep button when the printer is idle.
Do Nothing Sleep Hibernate
Return the printer settings to the factory default settings.
Do Not Restore Restore Now
Specify the content of the original document.
Text Graphics Text/Photo Photo

Understanding the printer menus 175
Specify how the original document was produced.
Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other
Specify whether or not copies are printed in color.
Enable or disable color in copying.
Specify whether an original document is two‑sided (duplex) or one‑sided (simplex), and then to specify whether the copy should be two‑sided or one‑sided.
1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided
Allow copying of two or four sheets of a document on one page.
Off 2–up Portrait 4–up Portrait 2–up Landscape 4–up Landscape
Specify whether or not a border is printed.
Keep the pages of a print job stacked in sequence when printing multiple copies.
Off [1,1,1,2,2,2] On [1,2,1,2,1,2]

Understanding the printer menus 176
Specify the paper size of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 4 x 6 ID Card
Specify the paper source for copy jobs.
Tray [x] Auto Size Match Manual Feeder
Place a sheet of paper between transparencies.
Place a sheet of paper between pages, copies, or jobs.
Off Between Copies Between Jobs Between Pages
Specify the separator sheet source.
Tray [x] Manual Feeder
1–9 Specify the level of darkness for the copy job.
1–999 Specify the number of copies for the copy job.

Understanding the printer menus 177
Specify header and footer information and its location on the page.
For the location, select from the following options:
Off Date/Time Page number Custom text Print on
All pages First page only All but first page Custom text
Specify the overlay text printed on each page of the copy job.
Confidential Copy Draft Urgent Custom Off
Custom Overlay Specify the custom overlay text.
Allow interruption of a print job to copy a page or document.
Copy in a single copy job, a document that contains mixed paper sizes.
Allow Save as Shortcut
Save custom copy settings as shortcuts.
Adjust the amount of background visible on a copy.
‑4 to 4
Automatically center the content on the page.
Enable an equal balance of colors in the output.
Cyan - Red Magenta - Green Yellow - Blue

Understanding the printer menus 178
Specify which color to drop during copies, and how much to increase or decrease the dropout.
None Red Green Blue Default Red Threshold
0–255 Default Green Threshold
0–255 Default Blue Threshold
Specify the contrast used for the copy job.
0–5 Best for content
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a copy.
‑4 to 4
Specify if the original document is scanned edge-to‑edge.
Scan edge to edge
1–5 Adjust the amount of sharpness of a copy.
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default, while “warm” values generate a redder output than the default.
‑4 to 4
Create a sample copy of the original document.
Analog Fax Setup mode sends the fax job through a telephone line.

Understanding the printer menus 179
Fax Name or Station Name Specify the name of the fax in the printer.
Fax Number or Station Number Specify the number assigned to the fax.
Specify how the fax is identified.
Fax Name or Station Name Fax Number or Station Number
Set the printer to fax manually only, which requires a line splitter and a telephone handset.
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Equal Mostly sent All send All receive Mostly receive
Specify whether or not the printer cancels fax jobs.
Specify the type of caller ID being used.
Specify the direction from where digits are masked in an outgoing fax number.
Off From left From right
0–58 Specify the number of digits to mask in an outgoing fax number.

Understanding the printer menus 180
Configure the fax cover page.
Off by default On by default Never use Always use Include to field
On Off Include from field
Off On From Include Message field
Off On Message Include Logo
Off On Include Footer [x]
Specify quality in dots per inch (dpi). A higher resolution gives better print quality, but increases the fax transmission time for outgoing faxes.
Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi

Understanding the printer menus 181
Specify the paper size of the original document.
Mixed Sizes Letter Legal Executive Folio Statement
Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x]l
Specify how text and graphics are oriented on a page.
Off Long edge Short edge
Specify the content of the original document.
Text Graphics Text/Photo Photo
Specify how the original document was produced.
Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser
1–9 Lighten or darken the output.
Dial Prefix Enter a dialing prefix, such as 99. A numeric entry field is provided.
Establish a dialing prefix rule.

Understanding the printer menus 182
0–9 Specify the number of times the printer tries to send the fax to a specified number.
1–200 Specify the number of minutes between redials.
Enable or disable switchboard blind dialing without a dial tone.
Enable or disable Error Correction Mode for fax jobs.
Fax files that are scanned at the printer.
Allow the printer driver to send fax jobs.
Allow Save as Shortcut
Save fax numbers as shortcuts in the printer.
Specify the dialing sound, either as a tone or a pulse.
Specify the maximum speed in baud at which faxes are sent.
2400 4800 9600 14400 33600
Scan a document that contains mixed paper sizes into a single file.
Specify whether a preview will appear on the display for scan jobs.
Adjust the amount of background visible on a scanned image.
‑4 to 4
Enable an equal balance of colors in the scanned image.
Cyan - Red Magenta - Green Yellow - Blue

Understanding the printer menus 183
Specify which color to drop, and how much to increase or decrease the dropout.
None Red Green Blue Default Red Threshold
0–255 Default Green Threshold
0–255 Default Blue Threshold
Specify the contrast in the scanned image.
Best for content 0–5
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible.
‑4 to 4
Specify if the original document is scanned edge-to‑edge prior to faxing.
Scan edge to edge
0–5 Adjust the sharpness of a fax.
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.
‑4 to 4
Enable Color Fax Scans
Enable color faxing.
Off by default On by default Never use Always use
Auto Convert Color Faxes to Mono Faxes
Convert all outgoing faxes to black and white.

Understanding the printer menus 184
Allow the printer to receive fax jobs.
Remove fax jobs that request specific unavailable resources from the print queue.
None Toner Toner and Supplies
1–25 Specify the number of rings before answering an incoming fax job.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source.
Specify the paper source selected to supply paper for the printer to print an incoming fax.
Auto Tray [x] Multi‑Purpose Feeder
Enable two‑sided (duplex) printing for incoming fax jobs.
Enable the printer to include separator sheets for incoming fax jobs.
Off Before Job After Job
Specify where the printer will pick the separator sheet.
Tray [x] Manual Feeder
Specify an exit bin for received faxes.
Standard Bin Bin [x]
Print the transmission information at the bottom of each page from a received fax.
Specify the maximum speed in baud at which faxes are received.
2400 4800 9600 14400 33600

Understanding the printer menus 185
Enable forwarding of received faxes to another recipient.
Print Print and Forward Forward
Specify the type of recipient to which faxes will be forwarded.
Fax E‑mail FTP LDSS eSF
Forward to Shortcut Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF).
Block No Name Fax
Enable blocking of incoming faxes sent from devices with no station ID specified.
Banned Fax List Enable the list of banned fax numbers stored in the printer.
Enable fax holding all of the time or according to set schedule.
Off Always On Manual Scheduled Fax Holding Schedule
Enable Color Fax Receive
Enable the printer to receive fax in color.
Enable printing of a transmission log after each fax job.
Print log Do not print log Print only for error
Enable printing of a receive error log following a receive error.
Print Never Print on Error
Enable automatic printing of fax logs.

Understanding the printer menus 186
Specify the source of the paper used for printing logs.
Tray [x] Manual Feeder
Specify whether printed logs display the dialed number or the station name returned.
Remote Fax Name or Remote Station Name Dialed Number
Enable access to the Fax Job log.
Enable access to the Fax Call log.
Specify the mode of the speaker.
On until Connected Always On Always Off
Control the volume setting.
Control the fax speaker ringer volume.
All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only
Specify ring patterns when the printer is answering calls.

Understanding the printer menus 187
Fax Server mode sends the fax job to a fax server for transmission.
To access the menu from the home screen, navigate to:
> Settings > Fax Settings > Fax Server Setup
To Format Specify the information using the virtual keyboard on the printer control panel.
SMTP Setup Specify the SMTP setup information.
Primary SMTP Gateway Specify the SMTP server port information.
Specify the image type for scan‑to‑fax jobs.
PDF (.pdf) XPS (.xps) TIFF (.tif)
Specify the content of the original document.
Text Text/Photo Graphics Photo
Specify how the original document was produced.
Color Laser Inkjet Photo/Film Magazine Newspaper Press Other
Specify the resolution level for scan to fax.
Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi
1–9 Lighten or darken the output.

Understanding the printer menus 188
Specify the orientation of the scanned image.
Specify the paper size of the document that is being scanned.
Letter Legal Executive Folio Statement
Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Business Card 3 x 5 in. 4 x 6 in.
Use Multi‑Page TIFF
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to fax job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
Enable analog fax receive.
E‑mail Server Setup
Specify e‑mail server information.
Subject Message Base file name

Understanding the printer menus 189
E‑mail Server Setup
Send a copy of the e-mail to the sender.
Send me a copy
Never appears On by default Off by default Always On
E‑mail Server Setup
Specify the maximum e-mail size in kilobytes.
Max E‑mail size
E‑mail Server Setup
Send a message when an e-mail is greater than the configured size limit.
E‑mail Server Setup
Specify a domain name, such as a company domain name, and then limit e‑mail destinations to that domain name only.
E‑mail Server Setup
Define the e‑mail server path name; for example: /directory/path.
Server Login Password Path Base file name Web Link
Specify the format of the scanned file.
PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)
Set the version of the PDF file that will be scanned for e‑mailing.
1.2–1.6 A–1a
Specify the content of the original document.
Text/Photo Photo Text Graphics

Understanding the printer menus 190
Specify how the original document was produced.
Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser
Specify whether or not copies are printed in color.
Specify the resolution of the scan in dots per inch.
75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi
1–9 Lighten or darken the output.
Specify the orientation of the scanned image.
Specify the paper size of the document being scanned.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

Understanding the printer menus 191
Specify how the text and graphics are oriented on the page.
Off Long edge Short edge
Set the quality of a JPEG photo image in relation to file size and quality of the image.
Best for content 5–90
5–90 Set the quality of a text image in relation to file size and quality of the image.
5–90 Set the quality of a text or photo image in relation to file size and the quality of the image.
5–90 Set the quality of a photo image in relation to file size and the quality of the image.
E‑mail images sent as
Specify how the images will be sent.
Use Multi‑Page TIFF
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
Specify whether or not the transmission log prints.
Print log Do not print log Print only for error
Specify the paper source for printing e-mail logs.
Tray [x] Manual Feeder
E‑mail Bit Depth
Enable the Text/Photo mode to produce smaller file sizes by using 1‑bit images when Color is set to Off.
8 bit 1 bit

Understanding the printer menus 192
Copy in a single copy job, a document that contains mixed paper sizes.
Specify whether or not a preview will appear on the display for scan jobs.
Allow Save as Shortcut
Save e-mail addresses as shortcuts.
Adjust the amount of background visible on a scanned image.
‑4 to 4
Enable an equal balance of colors in the output.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color to drop during scanning, and how much to increase or decrease the dropout.
None Red Green Blue Default Red Threshold
0–255 Default Green Threshold
0–255 Default Blue Threshold
Specify the contrast of the output.
Best for content 0–5
Create a mirror image of the original document.
Create a negative image of the original document.

Understanding the printer menus 193
Adjust the amount of shadow detail visible on a scanned image.
‑4 to 4
Scan edge to edge
Specify whether the original document is scanned edge-to-edge.
1–5 Adjust the amount of sharpness on a scanned image.
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.
‑4 to 4
Use cc:/bcc:
Enable the use of the cc: and bcc: fields.
Specify the format of the file for FTP sending.
PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps)
Set the version level of the PDF file for FTP sending.
1.2–1.6 A–1a
Specify the content of the original document.
Text/Photo Photo Text Graphics
Specify how the original document was produced.
Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser

Understanding the printer menus 194
Specify whether or not copies are printed in color.
Specify the quality of the scan in dots per inch.
150 dpi 200 dpi 300 dpi 400 dpi 600 dpi 75 dpi
1–9 Lighten or darken the output.
Specify the orientation of the scanned image.
Specify the paper size of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.
Specify how the text and graphics are oriented on the page.
Off Long edge Short edge

Understanding the printer menus 195
Set the quality of a JPEG photo image in relation to file size and the quality of the image.
Best for content 5–90
5–90 Set the quality of the text in relation to file size and the quality of the image.
5–90 Set the quality of a text or a photo image in relation to file size and the quality of the image.
5–90 Set the quality of a photo image in relation to file size and the quality of the image.
Use Multi‑Page TIFF
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
Specify whether the transmission log prints.
Print log Do not print log Print only for error
Specify a paper source when printing FTP logs.
Tray [x] Manual Feeder
Specify an output bin for FTP logs.
Standard Bin Bin [x]
Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images when Color is set to Off.
8 bit 1 bit
Base File Name Specify a base file name.
Copy a document that contains mixed paper sizes into a single scan job.

Understanding the printer menus 196
Specify whether a preview will appear on the display for scan jobs.
Allow Save as Shortcut
Enable shortcut creation for FTP addresses.
Adjust the amount of background visible on a copy.
‑4 to 4
Enable an equal balance of colors in the output.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color to drop during scanning, and how much to increase or decrease the dropout.
None Red Green Blue Default Red Threshold
0–255 Default Green Threshold
0–255 Default Blue Threshold
Specify the contrast of the output.
0–5 Best for content
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a scanned image.
‑4 to 4
Scan edge to edge
Specify whether the original document is scanned edge-to-edge.
1–5 Adjust the amount of sharpness of a scanned image.

Understanding the printer menus 197
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.
‑4 to 4
Specify the format of the file to be sent through FTP.
PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)
Set the version of the PDF file to be sent through FTP.
1.2–1.6 A‑1a
Specify the content of the original document.
Text/Photo Photo Text Graphics
Specify how the original document is produced.
Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Black and White Laser
Specify whether prints are in black‑and‑white or color.
Specify the resolution of the scan in dots per inch (dpi).
150 dpi 200 dpi 300 dpi 400 dpi 600 dpi 75 dpi

Understanding the printer menus 198
1–9 Lighten or darken the output.
Specify the orientation of the scanned image.
Specify the paper size of the original document.
Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.
Specify how the text and graphics are oriented on a page.
Off Long edge Short edge
Set the quality of a JPEG photo image in relation to file size and quality.
Best for content 5–90
5–90 Set the quality of the text in relation to file size and the quality of the image.
5–90 Set the quality of a text or a photo image in relation to file size and quality.

Understanding the printer menus 199
5–90 Sets the quality of a photo image in relation to file size and quality.
Use Multi‑Page TIFF
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page.
Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images when Color is set to Off.
8 bit 1 bit
File Name Specify a base file name.
Copy a document containing mixed paper sizes in a single copy job.
Specify whether a preview appears on the display for scan jobs.
Adjust the amount of background visible on a copy.
‑4 to 4
Enable an equal balance of colors in the scanned image.
Cyan - Red Magenta - Green Yellow - Blue
Specify which color to drop during scanning, and how much to increase or decrease in the dropout.
None Red Green Blue Default Red Threshold
0–255 Default Green Threshold
0–255 Default Blue Threshold
Specify the contrast of the scanned image.
Best for content 0–5

Understanding the printer menus 200
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a scanned image.
‑4 to 4
Scan edge to edge
Specify whether the original document is scanned edge-to-edge.
1–5 Adjust the amount of sharpness on a scanned image.
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.
‑4 to 4
1–999 Specify a default number of copies for each print job.
Set a default paper source for all print jobs.
Tray [x] MP Feeder Manual Paper Manual Envelope
Specify whether copies are printed in color or black‑and‑white.
Stack the pages of a print job in sequence when printing multiple copies.
On (1,2,1,2,1,2) Off (1,1,1,2,2,2)
Specify whether prints are on one side or on both sides of the page.
1 sided 2 sided
Define the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page.
Long Edge Short Edge

Understanding the printer menus 201
Specify the orientation of a multiple‑page document.
Specify that multiple‑page images be printed on one side of a paper.
Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up
Print a border on each page image.
Specify the positioning of multiple‑page images.
Horizontal Reverse Horizontal Reverse Vertical Vertical
Specify whether blank separator sheets are inserted.
Off Between Copies Between Jobs Between Pages
Specify the paper source for separator sheets.
Tray [x] Manual Feeder
Specify whether blank pages are inserted in a print job.
Do Not Print Print

Understanding the printer menus 202
Set the default printer language.
PS Emulation PCL Emulation
Specify if print jobs are removed from the print queue when they require unavailable printer options or custom settings. These print jobs are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print.
Set the logical and physical printable area.
Set the printer for a faster print speed or a higher toner yield.
Max Yield Max Speed
Set the printer to print text and graphics using only the black toner cartridge.

Understanding the printer menus 203
Set the storage location for downloads.
Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more memory than is available.
Specify the order in which held and confidential jobs are printed when Print All Order is selected.
Alphabetical Oldest First Newest First

Understanding the printer menus 204
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
1 sided 2 sided
Define binding for duplexed pages in relation to paper orientation.
Long Edge Short Edge
1–999 Specify the default number of copies for each print job.
Specify whether blank pages are inserted in a print job.
Do Not Print Print
Stack the pages of a print job in sequence when printing multiple copies.
Off (1,1,1,2,2,2) On (1,2,1,2,1,2)
Specify whether blank separator sheets are inserted.
Off Between Copies Between Jobs Between Pages
Specify the paper source for separator sheets.
Tray [x] Manual Feeder

Understanding the printer menus 205
Specify that multiple‑page images be printed on one side of a paper.
Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up
Specify the positioning of multiple‑page images.
Horizontal Reverse Horizontal Reverse Vertical Vertical
Specify the orientation of a multiple‑page document.
Print a border on each page image.
Quality menu items and descriptions
Specify whether images are printed in black and white or in color.
Adjust the color output on the printed page.

Understanding the printer menus 206
Specify the printed output resolution.
1200 dpi 4800 CQ
1–5 Lighten or darken the printed output.
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.
Reduce the amount of toner used for graphics and images. The amount of toner used for text is not reduced.
Adjust brightness in color outputs.
‑6 to 6
0–5 Adjust contrast in color outputs.
0–5 Adjust saturation in color outputs.

Understanding the printer menus 207
Adjust color in printed output by increasing or decreasing the amount of toner being used for each color.
‑5 to 5 Magenta
‑5 to 5 Yellow
‑5 to 5 Black
‑5 to 5 Reset Defaults
Print sample pages for each of the RGB and CMYK color conversion tables used in the printer.
sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK
Customize the RGB color conversions.
Vivid sRGB Display Display True Black sRGB Vivid Off RGB Text
Vivid sRGB Display Display True Black sRGB Vivid Off RGB Graphics
Vivid sRGB Display Display True Black sRGB Vivid Off

Understanding the printer menus 208
Customize the CMYK color conversions.
US CMYK Euro CMYK Vivid CMYK Off CMYK Text
US CMYK Euro CMYK Vivid CMYK Off CMYK Graphics
US CMYK Euro CMYK Vivid CMYK Off
Spot Color Replacement Provide the capability to assign specific CMYK values to named spot colors.
Color Adjust Initiate a recalibration of color conversion tables and allow the printer to make adjustments for color variations in output.
Determine and set if the printer creates a log of the print jobs it receives.
Job Accounting Utilities Print and delete log files or export them to a flash drive.
Determine and set how often a log file is created.

Understanding the printer menus 209
Log Action at End of Frequency
Determine and set how the printer responds when the frequency threshold expires.
None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log
Disk Near Full Level
Specify the maximum size of the log file before the printer executes the Disk Near Full Action.
Disk Near Full Action
Determine and set how the printer responds when the printer hard disk is nearly full.
None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current
Determine and set how the printer responds when disk usage reaches the maximum limit (100MB).
None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current
URL to Post Logs Determine and set where the printer posts job accounting logs.
E‑mail Address to Send Logs Specify the e‑mail address to which the device sends job accounting logs.
Log File Prefix Specify the prefix you want for the log file name.
Use To · Off 1–99 · Disk Full Action

Understanding the printer menus 210
Delete confidential and held jobs from the printer hard disk.
Confidential Held Not Restored All
Format the flash memory.
Delete Downloads on Disk
Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs.
Delete Now Do Not Delete
Activate Hex Trace Assist in isolating the source of a print job problem.
Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

Understanding the printer menus 211
Print a page containing information on errors, including XML markup errors.
Scale page content to fit the selected paper size.
Print annotations in a PDF.
Do Not Print Print
Print a page containing the PostScript error.
Lock PS Startup Mode
Enable users to disable the SysStart file.
Establish the font search order.
Enhance the contrast and sharpness of low‑resolution images and smoothen their color transitions.

Understanding the printer menus 212
Specify the set of fonts used in the Font Name menu.
Resident Disk Download Flash All
Identify a specific font and where it is stored.
Specify the symbol set for each font name.
Change the point size for scalable typographic fonts.
1.00–1008.00
Specify the font pitch for scalable monospaced fonts.
0.08–100.00
Specify the orientation of text and graphics on a page.

Understanding the printer menus 213
Specify the number of lines that print on each page.
Set the printer to print on A4‑size paper.
198 mm 203 mm
Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.
Auto CR after LF
Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.
Auto LF after CR
Configure the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders.
Off None 0–199 Assign Tray [x]
Off None 0–199 Assign Manual Paper
Off None 0–199 Assign Manual Envelope

Understanding the printer menus 214
Display the factory default setting assigned to each tray, drawer, or feeder.
MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3
Return all tray, drawer, and feeder assignments to the factory default settings.
Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKO
Set the default font for HTML documents.
Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

Understanding the printer menus 215
1–255 pt Set the default font size for HTML documents.
1–400% Scale the default font for HTML documents.
Set the page orientation for HTML documents.
8–255 mm Set the page margin for HTML documents.
Specify whether to print backgrounds on HTML documents.
Do Not Print Print
Select the optimal paper size, scaling, and orientation.
Invert bitonal monochrome images.
Scale the image to fit the selected paper size.
Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

Understanding the printer menus 216
Set the image orientation.
Portrait Landscape Reverse Portrait Reverse Landscape
The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. They contain information about using the printer and performing various tasks, including copying, scanning, and faxing.
English, French, German, and Spanish translations are stored in the printer.
Other translations are available on the Lexmark Web site at www.lexmark.com.
Print All Guides Prints all the guides
Copy Guide Provides information about making copies and changing settings
Fax Guide Provides information about sending faxes using fax numbers, shortcut numbers, or the address book, and about changing settings
E‑mail Guide Provides information about sending e‑mails using addresses, shortcut numbers, or the address book, and about changing settings
FTP Guide Provides information about scanning documents directly to an FTP server using an FTP address, shortcut numbers, or the address book, and about changing settings
Print Defects Guide Provides help in resolving repeating defects in copies or prints
Information Guide Provides help in locating additional information
Supplies Guide Provides part numbers for ordering supplies
Use To · Orientation · Menu item Description

Saving money and the environment 217
Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:
By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.
Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.
For information on how you can quickly save paper and energy using one printer setting, see “Using Eco‑Mode” on page 218.
As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 79.
There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:
If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or the Lexmark Toolbar.
You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog.
Before printing or making multiple copies of a document:

Saving money and the environment 218
Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 253.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings > Eco‑Mode > select a setting
Off Use the factory default settings for all settings associated with Eco‑Mode. Off supports the performance specifications of the printer.
Energy Reduce energy use, especially when the printer is idle.
Energy/Paper Use all the settings associated with Energy and Paper modes.
3 Click Submit.
To select a Quiet Mode setting using the Embedded Web Server:
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings > Quiet Mode > select a setting
Use To

Saving money and the environment 219
On Reduce printer noise.
Use factory default settings. This setting supports the performance specifications of the printer.
3 Click Submit.
To save energy, decrease the number of minutes the printer waits before it enters Sleep mode.
Available settings range from 1–180 minutes. The factory default setting is 30 minutes.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings > Timeouts.
3 In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep Mode.
4 Click Submit.
1 From the home screen, navigate to:
> Settings > General Settings > Timeouts > Sleep Mode
2 In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep Mode.
Use To · Off · 3 Touch

Saving money and the environment 220
Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings > Sleep Button Settings.
3 From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.
4 Click Submit.
1 From the home screen, navigate to:
> Settings > General Settings
2 Touch Press Sleep Button or Press and Hold Sleep Button.
3 Touch Hibernate >
To save energy, or if you are have trouble reading your display, adjust the brightness of the display.
Available settings range from 20–100. The factory default setting is 100.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Settings > General Settings.
3 In the Screen Brightness field, enter the brightness percentage you want for the display.
4 Click Submit.

Saving money and the environment 221
1 From the home screen, navigate to:
> Settings > General Settings > Screen Brightness
2 In the Screen Brightness field, enter the brightness percentage you want for the display.
If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 58.
If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 224.
From the home screen, navigate to:
> Settings > General Settings > Factory Defaults > Restore Now >
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:
To return Lexmark products for recycling:
1 Visit our Web site at www.lexmark.com/recycle.
2 Find the product type you want to recycle, and then select your country or region from the list.
3 Follow the instructions on the computer screen.
3 Touch

Saving money and the environment 222
Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.
Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.
The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.
When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.
The Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.
To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:
1 Visit our Web site at www.lexmark.com/recycle.
2 From the Toner Cartridges section, select your country or region from the list.
3 Follow the instructions on the computer screen.

Securing the printer 223
Locking the system board
To limit access to the system board, attach a security lock to the printer in the location identified in the illustration. The printer is compatible with most laptop computer security locks.

Your printer contains various types of memory that can store device and network settings, and user data.

Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs.
Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, scanner and bookmark settings, and embedded solutions.

Securing the printer 224
Types of memory Description
Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex scan, print, copy, and fax jobs, as well as form data, and font data.
Erase the content of any installed printer memory in the following circumstances:
In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.
The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.
1 Turn off the printer.
2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully powered up, the touch screen displays a list of functions, instead of the standard home screen icons.

Securing the printer 225
3 Touch Wipe All Settings.
The printer will restart several times during this process.
4 Touch Back > Exit Config Menu.
The printer will perform a power‑on reset, and then return to normal operating mode.
Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by scan, print, copy, and fax jobs, by securely overwriting files that have been marked for deletion.
1 Turn off the printer.
2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully powered up, the touch screen displays a list of functions, instead of the standard home screen icons.
4 Touch Yes to proceed with disk wiping.
5 Touch Back > Exit Config Menu.
The printer will perform a power‑on reset, and then return to normal operating mode.
Enable the hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.
1 Open a Web browser, and then type the printer IP address in the address field.

Securing the printer 226
2 Click Settings > Security > Disk Encryption.
3 From the Disk encryption menu, select Enable.
4 Click Submit.
1 Turn off the printer.
2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. Once the printer is fully powered up, the touch screen displays a list of functions, instead of standard home screen icons such as Copy or Fax.
3 Touch Disk Encryption > Enable.
4 Touch Yes to proceed with disk wiping.
5 Touch Back > Exit Config Menu.
The printer will perform a power‑on reset, and then return to normal operating mode.

Securing the printer 227
In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page and see the Embedded Web Server Administrator’s Guide.
1 Visit http://support.lexmark.com, and then navigate to:
Tech Library > Manuals & Guides
2 Type Embedded Web Server in the keyword field, and then click Filter.
3 Click Embedded Web Server to launch the document.

Maintaining the printer 228
Periodically, certain tasks are required to maintain the optimum performance of your printer.
1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove paper from the standard bin and multipurpose feeder.
3 Remove any dust, lint, and pieces of paper around and from inside the printer using a soft brush or vacuum.
4 Use a dry cloth to wipe away loose toner particles.
1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove all paper from the printer.
3 Dampen a clean, lint‑free cloth with water.
4 Wipe only the outside of the printer.
5 Make sure all areas of the printer are dry before beginning a new print job.

Maintaining the printer 229
Make sure you clean the ADF glass. A small speck of dirt on the ADF glass can cause a streak that goes down the entire length of the scanned page.
1 Slightly dampen a soft, lint-free cloth or paper towel with water.
2 Open the scanner cover.

3 Wipe the areas shown and let them dry.
4 Close the scanner cover.
Clean the ADF parts periodically to maintain optimal printing performance. Residue on the ADF parts may cause print quality issues and false 290–294 paper jam messages.
1 Turn the printer off.
2 Slightly dampen a soft, lint-free cloth with water.

Maintaining the printer 230
3 Open the ADF cover.

4 Remove the pick roller assembly.

5 Wipe the surface of both pick rollers.

Maintaining the printer 231
6 Replace the pick roller assembly.

7 Wipe the entire surface under the ADF cover, including the two small white rollers.
8 Wipe the separator pad, and then wipe the pick pad.


Maintaining the printer 232
9 Pull the flap up as shown, and then wipe the sensor behind it.

10 Close the flap, and then close the ADF cover.

Clean the printhead lenses when you encounter print quality problems.
1 Open the top access cover, and then open the front door.

Maintaining the printer 233

2 Remove all four toner cartridges.
3 Locate the four printhead lenses.

4 Clean the lenses using compressed air.
5 Reinstall the toner cartridges.

Maintaining the printer 234
6 Close the front door, and then close the top access cover.

A message appears on the display when a replacement supply item is needed or when maintenance is required. For more information, see “Supplies menu” on page 134.
From the home screen, touch Status/Supplies > View Supplies.
1 Open a Web browser, and then type the printer IP address in the address field.
2 Click Device Status > More Details.

Maintaining the printer 235
To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.
When a message appears on the printer display indicating which toner cartridge needs to be replaced, immediately order a new toner cartridge.
For information on replacing a toner cartridge, see the instruction sheet that came with the supply.
Estimated cartridge yield is based on the ISO / IEC 19798 standard (with about 5% coverage per color). Extremely low print coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may cause cartridge parts to fail prior to exhaustion of toner.
Part name Lexmark Return Program Cartridge Regular cartridge
Black High Yield Toner Cartridge X746H1KG X746H2KG
X746A2YG X748H2YG
Yellow High Yield Toner Cartridge*
X746A2MG
Magenta High Yield Toner Cartridge*
X748H2MG
X746A1CG
X746A2CG
Cyan High Yield Toner Cartridge*
X748H2CG
* These toner cartridges are supported only in X748x printer models.
A message on the printer display appears when the fuser or transfer module needs to be replaced.
For information on replacing the fuser or transfer module, see the instruction sheet that came with the supply.
Yellow Toner Cartridge · Magenta Toner Cartridge · Cyan Toner Cartridge

Maintaining the printer 236
Part name Part number
Fuser 40X8112 (100 V)
40X8111 (230 V)
Ordering a waste toner bottle
A message on the printer display appears when the waste toner bottle needs to be replaced.
For information on replacing the waste toner bottle, see the instruction sheet that came with the supply.
Part name Part number
Waste toner bottle C734X77G
Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the ADF.
For information on replacing the ADF parts, see the instruction sheets that came with the parts.
Part name Part number
ADF pick assembly 40X5188
ADF pick pad 40X5189
A message will appear on the printer display when a photoconductor needs to be replaced.
For information on replacing a photoconductor, see the instruction sheet that came with the supply.
Part name Part number
Photoconductor, Multi‑Pack C734X24G
Transfer module 40X8307 · Separator pad 40X5187 · Photoconductor C734X20G

Maintaining the printer 237
Lexmark printers, parts, and supplies are designed to perform together for superior print quality. We recommend that you use only genuine Lexmark parts and supplies to help extend the life of your product.
Lexmark's warranty does not cover damage caused by non-Lexmark parts and supplies.
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Do not expose supplies to:
1 Open the printer top access cover, and then open the front door.


Maintaining the printer 238
2 Pull the green tabs of the specified cartridge up and out to remove the cartridge from the printer.

3 Unpack the replacement toner cartridge.
4 Place the old cartridge in the recycling bag.
5 Place the bag in the shipping box used for the replacement part.
6 Shake the replacement cartridge front‑to‑back and side‑to‑side to redistribute the toner.
7 Remove the red packing strip from the cartridge.
8 Insert the cartridge into the printer.


Maintaining the printer 239
9 Close the front door, and then close the printer top access cover.




Maintaining the printer 240
1 Turn the printer off, and then open the ADF cover.

2 Replace the pick roller assembly, as shown.


3 Dispose of the old pick roller assembly.


Maintaining the printer 241
1 With the ADF cover still open, pull up on the separator pad to remove it.

2 Replace the separator pad.

3 Dispose of the old separator pad.


Maintaining the printer 242
1 With the ADF cover still open, pull straight up on the pick pad to remove it.

2 Replace the pick pad with a new one, and then discard the old pad.

3 Open the flap to access the sensor lens underneath, and then wipe the lens clean.

Maintaining the printer 243

4 Close the flap, and then close the ADF cover.

1 Locate the air filter on the back of the printer, and then remove the cover.


Maintaining the printer 244
2 Remove the old air filter, and then discard it.

3 Replace the air filter, and then replace the cover.

4 Turn the printer on.

Maintaining the printer 245
1 Locate the waste toner bottle release button on the left side of the printer.
2 Press the release button to the left, and then pull the waste toner bottle out to remove it from the printer.

3 Unpack the replacement waste toner bottle.

4 Peel the seal from the side of the full waste toner bottle, and then place it over the hole to seal off the waste toner bottle.
5 Place the sealed waste toner bottle in the recycling bag.

Maintaining the printer 246
6 Place the bag into the shipping box used for the replacement part.

7 Peel the recycling label off and place it on the shipping box.
8 Insert the new waste toner bottle into the printer.

1 Open the top access cover, and then open the front door.

Maintaining the printer 247


2 Pull the specified photoconductor up, and then slide it to the right to remove it from the printer.

3 Unpack the replacement photoconductor.


Maintaining the printer 248
4 Align and insert the left end of the photoconductor, and then press the right end into place.

5 Remove the red packing strip from the top of the photoconductor.

6 Close the front door, and then close the top access cover.


Maintaining the printer 249
Reset the maintenance counter after installing the new photoconductors. Use any one of the following procedures:
Follow this procedure when the photoconductors are replaced and no “replace” or “low” message appears:
1 From the home screen, navigate to:
> Supplies Menu > Replace Supply.
3 When [color] photoconductor replaced appears, touch Yes.
to return to the home screen.
Follow this procedure when the photoconductors are replaced and 84 Replace [color] photoconductor, 84 [color] photoconductor nearly low, or 84 [color] photoconductor low still appears:
1 From the home screen, navigate to:
Status/Supplies > Supply Replaced
2 When Replaced [color] photoconductor appears, touch Yes.
4 Touch

Maintaining the printer 250
Use only the power cord provided with this product or the manufacturer's authorized replacement.
The printer and options can be safely moved to another location by following these precautions:
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Managing the printer 251
Finding advanced networking and administrator information
This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.
1 Open an Embedded Web Server associated with your printer.
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Check the virtual display that appears in the top left corner of the screen.
The virtual display works as an actual display would work on a printer control panel, showing printer messages.
You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.
To view reports from a network printer:
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer you can:
2 Click Reports, and then click the type of report you want to view.
Configure the printer to send you e‑mail alerts when the supplies are getting low or when the paper needs to be changed or added, or when there is a paper jam.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings.

Managing the printer 252
3 Under Other Settings, click E‑mail Alert Setup.
4 Select the items for notification, and type the e‑mail addresses.
5 Click Submit.

Carefully select paper and specialty media and load it properly to avoid most jams. For more information, see “Avoiding jams” on page 253. If jams do occur, follow the steps outlined in this chapter.

Correct paper loading Incorrect paper loading

Clearing jams 253

When a jam occurs, a message indicating the jam location appears on the printer display. Open doors and covers, and remove trays to access jam locations. To resolve any paper jam message, you must clear all jammed papers from the paper path.
Area name Jam numbers What to do
Inside the printer 200–201 Open the front door, and then remove the jammed paper from behind the toner cartridge area.
Open the front door, and then remove the jammed paper from under the photoconductor units.
Open the front door, and then remove the jammed paper from under the fuser.
Inside the printer 202–203 Open the front door, and then remove the jammed paper from fuser area.
Open the top access cover, and then remove the jammed paper.
Inside the printer 230 Open the front door, and then remove the jammed paper located between the front door and Tray 1.
Standard output bin 202–203 Remove all paper from the standard output bin, and then remove the jammed paper.
Tray [x] 24x Open each tray, and then remove any jams.
Multipurpose feeder 250 Remove all paper from the multipurpose feeder, and then remove the jammed paper.
Automatic Document Feeder (ADF) 29y.xx Open the ADF cover, and then remove any jammed paper.
Open the duplex cover, and then remove the jammed paper.
Scanner cover Open the scanner cover, and then remove any jammed paper.
Clearing jams 254

1 Open the printer top access cover.

2 Open the front door.

3 Firmly grasp the jammed paper on each side, and then gently pull the paper up and out to remove it from behind the toner cartridge area.
Clearing jams 255

4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
1 Ope the printer top access cover.
2 Open the front door.
3 If lodged under the photoconductor units, then firmly grasp the jammed paper on each side, and then gently pull it out .

4 If the jammed paper is lodged too tightly under the photoconductor units, then remove the photoconductor units and place them on a flat surface.
Clearing jams 256


5 Firmly grasp the jammed paper on each side, and then gently pull it out.
6 Reinstall each photoconductor unit.
7 Close the front door, and then close the printer top access cover.
8 From the printer control panel, touch Continue, jam cleared.
1 Open the printer top access cover.
2 Open the front door.
3 Determine where the jammed paper is located, and then remove it: a If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
b If the jammed paper paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper
on each side, and then gently pull it out.
Clearing jams 257

c If the jammed paper is not visible, then remove the fuser unit:

2 Using the handholds on each side, lift and pull the fuser out of the printer.
d Place the fuser on a flat surface with the blue thumb screws facing you.
Clearing jams 258

e Pull and then rotate the green rectangular knob clockwise to unlock the top paper guide.

f Press the green arrow tab to the left, and then lift the top paper guide.

g Firmly grasp the jammed paper on each side, and then gently pull it out.
h Close the top paper guide. Make sure both sides of the paper guide are firmly seated.
Clearing jams 259

i Pull and then rotate the green rectangular knob counterclockwise to firmly secure the top paper guide.

j Reinstall the fuser unit:
1 Align the fuser unit using the handholds on each side, and then place it back into the printer.
2 Turn the screws clockwise to fasten the fuser securely.

4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.
Clearing jams 260


1 Open the printer top access cover.
2 Open the front door.
3 Determine where the jammed paper is located, and then remove it: a If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
b If the jammed paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper on each
side, and then gently pull it out.
Clearing jams 261

c If the jammed paper is not visible, then remove the fuser unit:
1 Turn the screws on the fuser counterclockwise to loosen them.

2 Using the handholds on each side, lift and pull the fuser out of the printer.
d Place the fuser on a flat surface with the blue thumb screws facing you.
Clearing jams 262

e Pull and then rotate the green rectangular knob clockwise to unlock the top paper guide.

f Press the green arrow tab to the left, and then lift the top paper guide.

g Firmly grasp the jammed paper on each side, and then gently pull it out.
h Close the top paper guide. Make sure both sides of the paper guide are firmly seated.
Clearing jams 263

i Pull and then rotate the green rectangular knob counterclockwise to firmly secure the top paper guide.

j Reinstall the fuser unit:
1 Align the fuser unit using the handholds on each side, and then insert it back into the printer.
2 Turn the screws clockwise to fasten the fuser securely.

4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
Clearing jams 264

1 Open the printer top access cover.

2 Open the front door.

3 Firmly grasp the jammed paper on each side, and then gently pull it out.
4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
Clearing jams 265

1 Open Tray 1.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close Tray 1.
4 From the printer control panel, touch Continue, jam cleared.
1 Open the specified tray.
2 Firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams 266


3 Close the tray.
4 From the printer control panel, touch Continue, jam cleared.
1 Press the paper release lever, and then remove any jammed pages from the multipurpose feeder.

2 Load new paper into the multipurpose feeder.
3 From the printer control panel, touch Continue, jam cleared.
1 Remove all original documents from the Automatic Document Feeder (ADF).
2 Open the ADF cover, firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams 267


3 Close the ADF cover.
4 Open the duplex cover, firmly grasp the jammed paper on each side, and then gently pull it out.

5 Open the scanner cover, firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams 268

6 Close the scanner cover.
7 Reload original documents into the ADF, straighten the stack, and then adjust the paper guide.
Clearing jams 269
![Page 270 of the Lexmark X746de user manual — Change [paper source] to [custom type name]](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-270.webp?w=400)
Solving basic printer problems
If there are basic printer problems, or the printer is unresponsive, make sure:
Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.
Wait for the process to complete.
An error has occurred with the USB drive. Please remove and reinsert drive.
Try one or more of the following:
Try one or more of the following:
Troubleshooting 270

Try one or more of the following:
Try one or more of the following:
Close the front door of the printer.
Close the printer top access cover to clear the message.
The printer attempted to recover data on a corrupted hard disk. The printer hard disk cannot be repaired.
From the home screen, touch Format disk to reformat the printer hard disk and clear the message.
Try one or more of the following:
Troubleshooting 271

Disk near full. Securely clearing disk space.
Try one or more of the following:
The printer hard disk must be reformatted.
Touch Format disk to reformat the printer hard disk and clear the message.
Error reading USB drive. Remove USB.
An unsupported flash drive is inserted. Remove the flash drive, and then install a supported one.
There is not enough memory to send the fax job.
Touch Continue to clear the message.
Fax partition inoperative. Contact system administrator.
The fax partition appears to be corrupted. Try one or more of the following:
Fax server 'To Format' not set up. Contact system administrator.
The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
Troubleshooting 272
![Page 273 of the Lexmark X746de user manual — Load [paper source] with [custom string]](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-273.webp?w=400)
The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
Insert the specified tray into the printer.
Try one or more of the following:
Try one or more of the following:
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default paper source. • Cancel the print job.
Try one or more of the following:
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default paper source. • Cancel the print job.
Troubleshooting 273
![Page 274 of the Lexmark X746de user manual — Load Manual Feeder with [paper size]](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-274.webp?w=400)
Try one or more of the following:
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it feeds from the default paper source. • Cancel the print job.
Try one or more of the following:
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it feeds from the default paper source. • Cancel the print job.
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Troubleshooting 274

Try one or more of the following:
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been restarted.
No analog phone line connected to modem, fax is disabled.
Make sure the analog phone line is plugged into the modem.
Try one or more of the following:
Remove any remaining packaging material from the specified location.
Remove the stack of paper from the standard exit bin.
Install a new separator pad.
Try one or more of the following:
Troubleshooting 275

The ADF cover is open. The message clears when the cover is closed.
The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.
SMTP server not set up. Contact system administrator.
An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to clear the message. If the message appears again, contact your system support person.
Touch Continue to delete the specified job.
A supply needed to complete the job is missing. Try one of the following:
1 Order the missing supply immediately. 2 Install the supply. For more information, see the instruction sheet that came with the supply. • Touch Cancel job to clear the message and cancel the print job.
The paper size in the specified tray is unsupported. Replace it with a supported paper size.
An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.
An error occurred on the Web link server, or the Web link server is not configured properly.
Touch Continue to clear the message. If the message appears again, then contact your system support person.
Troubleshooting 276

Try one or more of the following:
For instructions on removing and installing a cartridge, touch More Information. • Remove and reinstall the defective toner cartridge.
Remove the unsupported toner cartridge, and then install a supported one.
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Troubleshooting 277

Try one or more of the following:
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Troubleshooting 278
![Page 279 of the Lexmark X746de user manual — 55 Unsupported option in slot [x]](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-279.webp?w=400)
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option card from the printer system board, and then replace it with a supported card.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
Troubleshooting 279

Try one or more of the following:
The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.
Try one or more of the following:
The printer discards any data received through the serial port. • Make sure the Serial Buffer menu is not set to Disabled.
Try one or more of the following:
The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.
Try one or more of the following:
The printer discards any data received through the USB port. • Make sure the USB Buffer menu is not set to Disabled.
Something has changed in the printer to invalidate the held jobs. Possible changes include:
Touch Continue to clear the message.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Check if all tray configurations are correct. Remove unnecessary trays if needed.
Troubleshooting 280

4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess disks.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
Try one or more of the following:
Try one or more of the following:
Troubleshooting 281

Try one or more of the following:
Try one or more of the following:
If the error message remains, the hard disk may be defective and require replacing.
1 Order a replacement fuser immediately.
2 When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.
3 Touch Continue to clear the message and continue printing.
Replace the fuser using the instruction sheet that came with the replacement part.
1 Replace the fuser, following the instruction sheet that came with the replacement part.
2 Touch Continue to clear the message and continue printing.
1 Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
Troubleshooting 282
![Page 283 of the Lexmark X746de user manual — 84.xx [color] photoconductor nearly low](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-283.webp?w=400)
Reinsert the waste toner bottle into the printer.
Order a replacement waste toner bottle immediately.
1 Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
Replace the transfer module, following the instruction sheet that came with the replacement part.
1 Replace the transfer module, following the instruction sheet that came with the replacement part.
2 Touch Continue to clear the message and continue printing.
Insert the transfer module into the printer.
1 Order a replacement transfer module immediately.
2 From the printer control panel, touch Continue to clear the message and continue printing.
3 When print quality is reduced, install the new transfer module.
For instructions on installing the transfer module, see the instruction sheet that came with the replacement part or touch More Information on the printer home screen.
Install the specified color photoconductor, following the instruction sheet that came with the replacement part.
1 Order a replacement photoconductor.
2 When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the replacement part.
3 Touch Continue to clear the message and continue printing.
Troubleshooting 283
![Page 284 of the Lexmark X746de user manual — 88.xx [color] cartridge low](/cdn/reader/7b/7bcaf379a3a0bbd7db2dd3a1ce2c7f24ed7a00a12fbf804af38ccfe3193d995d/images/page-284.webp?w=400)
1 Order a replacement photoconductor immediately.
2 When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the replacement supply.
3 Touch Continue to clear the message and continue printing.
1 Replace the photoconductor, following the instruction sheet that came with the replacement supply.
2 From the printer control panel, touch Continue to clear the message and continue printing.
The specified print or toner cartridge is empty.
1 Replace the specified cartridge.
For instructions on replacing cartridge, from the printer control panel, touch More Information.
2 Touch Continue to clear the message and continue printing.
The specified print cartridge is critically low.
1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
1 Remove the specified cartridge.
2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.
3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Troubleshooting 284

Order a replacement for the specified print cartridge.
The specified print cartridge is very low.
1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
Try one or more of the following:
Try one or more of the following:
Troubleshooting 285

Print without the scanner or contact your system support person.
840.02 Scanner disabled. Contact system administrator if problem persists.
Try one or more of the following:
The printer automatically clears the message in 30 seconds, and then disables the download emulator on the firmware card.
The PDF files may contain unavailable fonts.
1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon > Advanced > Print as image > OK > OK.
The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer on.
If Ready does not appear, then turn the printer off and contact Customer Support.
Make sure the flash drive is supported.
Try one or more of the following:
From the printer control panel, check the status. If necessary, follow the recovery instructions.
Make sure Ready appears on the display before sending a print job.
Troubleshooting 286

Remove and then reinstall or replace the supply.
Remove the paper stack from the standard exit bin.
Load paper in the tray.
The printer software is available on the Lexmark Web site at http://support.lexmark.com.
MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLE
For more information, visit the Lexmark Web site at http://support.lexmark.com.
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.
These are possible solutions. Try one or more of the following:
The print job may contain a formatting error or invalid data.
Troubleshooting 287

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.
Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.
Try one or more of the following:
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the print job.
From the home screen, navigate to:
> Settings > General Settings > Print Recovery > Page Protect > Off >
When using Eco‑Mode or Quiet Mode settings, you may notice a reduction in performance.
Try one or more of the following:
MAKE SURE TO USE PAPER NOT NARROW ENOUGH TO INVOKE THE SLOWDOWN MODE
Place larger paper such as Letter and A4 in the tray, and then print the same file.
If the problem continues, then the printer may need to be serviced. For more information, contact customer support.
Troubleshooting 288

C HECK THE PAPER TYPE AND PAPER SIZE SETTINGS
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel Paper menu, check the paper type and paper size settings.
These are possible solutions. Try one or more of the following:
USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS
These are possible solutions. Try one or more of the following:
From the Finishing menu or Print Properties, set Collate to On.
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.
Troubleshooting 289

Add printer memory or an optional hard disk.
I NCREASE THE P RINT T IMEOUT VALUE
1 From the home screen, navigate to:
> Settings > General Settings > Timeouts
2 Touch the left or right arrow next to Print Timeout until the desired value appears.
3 Touch Submit.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure there are no obstructions:
1 Lift the scanner unit.
2 Remove any obstruction keeping the scanner unit open.
3 Lower the scanner unit.
These are some examples of poor copy quality:
Troubleshooting 290

Try one or more of the following:
Check the display and clear any error messages.
When the print remains faded, replace the toner or print cartridge.
The scanner glass may be dirty. Clean the scanner glass with a clean, lint‑free cloth dampened with water.
For more information, see “Cleaning the scanner glass” on page 229.
Adjust the toner darkness from the Copy menus.
Check the quality of the original document.
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
When patterns (moiré) appear in the output:
Advanced Options > Advanced Imaging > Sharpness > lower the Sharpness setting • On the Copy screen, make sure no scaling is being selected.
Troubleshooting 291

When the text is light or disappearing:
Content > Text >
> select the appropriate source for the original document being copied >
Advanced Options > Advanced Imaging > Sharpness > increase the current setting • From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Background removal, and then reduce the current setting • From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Contrast > increase the current setting • From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Shadow detail > reduce the current setting
When the output appears washed out or overexposed:
Advanced Options > Advanced Imaging > Shadow detail > reduce the current setting • From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Background removal > reduce the current setting
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
Troubleshooting 292

If your scanner is not responding, then make sure:
Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem with the scanner.
These are possible solutions. Try one or more of the following:
Make sure the network or USB cable is securely connected to the computer and the printer.
Turn off and then restart the computer.
These are possible solutions. Try one or more of the following:
Close all programs not being used.
Select a lower scan resolution.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Troubleshooting 293

Clean the scanner glass with a clean, lint‑free cloth dampened with water. For more information, see “Cleaning the scanner glass” on page 229.
Increase the resolution of the scan for a higher quality output.
Make sure the quality of the original document is satisfactory.
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure the network or USB cable is securely connected to the computer and the printer.
Troubleshooting 294

The indicator light blinks red until you set up fax and e‑mail. To set up fax and e‑mail, follow these steps:
1 From the home screen, navigate to:
> General Settings > Run initial setup > Yes > Submit
2 Turn the printer off, and then turn it back on.
3 From the printer control panel, touch your language.
4 Touch your country or region, and then touch Continue.
5 Select your time zone, and then touch Continue.
6 Touch Fax and E‑mail to clear the icons, and then touch Continue.
Contact your telecommunications company to verify that your telephone line is subscribed to the caller ID service.
If your region supports multiple caller ID patterns, you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2). The availability of these settings by way of the Fax menu depends on whether your country or region supports multiple caller ID patterns. Contact your telecommunications company to determine which pattern or switch setting to use.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure the cable connections for the following hardware are secure, if applicable:
Troubleshooting 295

1 Plug a telephone into the wall jack.
2 Listen for a dial tone.
3 If you do not hear a dial tone, then plug a different telephone into the wall jack.
4 If you still do not hear a dial tone, then plug a telephone into a different wall jack.
5 If you hear a dial tone, then connect the printer to that wall jack.
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.
To ensure the printer is working correctly, connect it directly to the telephone line. Disconnect any answering machines, computers with modems, or telephone line splitters.
Clear any jams, and then make sure that Ready appears.
Call Waiting can disrupt fax transmissions. Disable this feature before sending or receiving a fax. Call your telephone company to obtain the keypad sequence for temporarily disabling Call Waiting.
Voice Mail offered through your local telephone company may disrupt fax transmissions. To enable both Voice Mail and the printer to answer calls, you may want to consider adding a second telephone line for the printer.
Troubleshooting 296

1 Dial the fax number.
2 Scan the original document one page at a time.
Try one or more of the following:
If the tray is empty, then load paper in the tray or feeder.
The ring count delay sets the number of times the phone rings before the printer answers. If you have extension phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then keep the Ring Delay setting at 4.
1 Type the printer IP address in the address field of your Web browser.
If you do not know the IP address of the printer, then you can:
2 Click Settings > Fax Settings > Analog Fax Setup.
3 In the Rings to Answer field, enter the number of times you want the phone to ring before the printer answers.
4 Click Submit.
Replace the toner or print cartridge.
These are possible solutions. Try one or more of the following:
On the home screen, touch Fax to put the printer in Fax mode.
Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper left corner.
Troubleshooting 297

Try one or more of the following:
Ask the person who sent you the fax to:
When 88 Cartridge low appears or when the prints appear faded, replace the cartridge.
Decrease the incoming fax transmission speed:
1 Type the printer IP address in the address field of your Web browser.
2 Click Settings > Fax Settings > Analog Fax Setup.
3 In the Max Speed box, click one of the following: 2400 4800 9600 14400 33600
4 Click Submit.
C HECK THE SYSTEM LOG FOR RELEVANT DETAILS
1 Type the printer IP address or host name in the address field of your Web browser.
Troubleshooting 298

If you do not know the IP address or host name of the printer, then you can:
2 Click Settings or Configuration.
3 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
4 Click System tab > Log
5 From the Filter menu, select an application status.
6 From the Application menu, select an application, and then click Submit.
MAKE SURE THE FILE NAME YOU WANT TO SCAN TO IS NOT ALREADY IN USE
Verify that the file to which you want to scan is not open by another application or user.
To help prevent errors, make sure either Append time stamp or Overwrite existing file is selected in the destination configuration settings.
In the destination configuration settings, lower the scan settings. For example, to lower the scan resolution, disable Color, or change the “Content type” setting to Text.
If you still cannot isolate the problem, then contact customer support.
MAKE SURE THE BOOKMARK POINTING TO THE FORM IS IN THE BOOKMARKS ROOT FOLDER
If the bookmark pointing to the form was created in a subfolder of the Bookmarks folder, then it will not be available under the Forms solution. Delete the bookmark and recreate it under the Bookmarks root folder.
The printer does not validate bookmarks. If the URL or network location that was specified when the bookmark was created is incorrect, then the printer will not be able to access the document.
MAKE SURE THE BOOKMARK IS CREATED WITH FORMS AND FAVORITES
If the bookmark is created using another application, then it cannot be accessed in Forms and Favorites.
Troubleshooting 299

M AKE SURE THE PRINTER AUTHENTICATION IS CONFIGURED
If the application is configured to use MFP authentication credentials, then the printer authentication settings must be configured from the Embedded Web Server.
For more information on configuring the printer authentication settings, see the Embedded Web Server Administrator's Guide available on www.lexmark.com.
Check that the folder or source file is set to be shared across the network.
If the destination has been moved, then the network address may have changed. The destination network address can be accessed from the Embedded Web Server.
Make sure that all appropriate network cables are securely connected and that the network settings of the printer are correctly configured. For information on networking the printer, see the Networking Guide on the Software and Documentation CD that came with the printer.
IF THE SOURCE FILE AND PRINTER RESIDE IN DIFFERENT DOMAINS, THEN MAKE SURE THE DOMAIN INFORMATION IS SPECIFIED
If the source file exists within a different domain than the printer, then you can edit the destination from the application configuration page and enter the appropriate domain information in the Network Address and Network Domain fields. If you do not know the network address of the computer where your source file resides, then consult your system support person.
You can also add the domain name to the Domain Search Order list under the printer network setup.
1 Type the printer IP address or host name in the address field of your Web browser.
If you do not know the IP address or host name of the printer, then you can:
2 Click Settings or Configuration.
3 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
4 Click System tab > Log.
5 From the Filter menu, select an application status.
6 From the Application menu, select an application, and then click Submit.
Troubleshooting 300

M AKE SURE TO ENABLE AT LEAST ONE VALID DESTINATION
D ISPLAY THE APPLICATION ICON WHEN NO DESTINATIONS ARE AVAILABLE
1 From the Embedded Web Server, click Settings or Configuration.
2 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
3 Click the name of the application > Configure.
4 From the Home Screen Button section, select Always show button under Display Option, and then click Apply.
M AKE SURE THE DESTINATION IS VALID
Verify that the destination is valid in the application configuration settings.
If the destination has been moved, then the network address may have changed. The destination network address can be accessed from the Embedded Web Server.
IF THE PRINTER AND DESTINATION RESIDE IN DIFFERENT DOMAINS, THEN MAKE SURE THE DOMAIN INFORMATION IS SPECIFIED
If the destination exists within a different Windows domain than the printer, then you can edit the destination from the application configuration page and enter the appropriate Windows domain information in the domain field as part of the Network Folder Address. You can also add the domain name to the Domain Search Order list under the printer network setup.
If the destination resides on a computer that uses a newer version of the Windows operating system (Windows XP or later), and the Windows Firewall is enabled, then the printer may have difficulty sending information to the destination if the destination and the printer reside on different subnets. The Windows Firewall must either be configured to allow communication with the subnet the printer resides on, or the destination should be set up on the same subnet as the printer. For more information, contact your system support person.
MAKE SURE A FILE WITH THE DEFAULT FILE NAME DOES NOT ALREADY EXIST IN THE DESTINATION
If the three configuration settings for the File Name section of the application configuration page are not selected (allow user to enter file name; append time stamp; overwrite existing file), and a file using the default file name already exists within the destination, then there will be no method in place to distinguish the newly scanned file from the file present in the destination. The printer will not be able to overwrite the old file, the new file will not receive a time stamp to differentiate it from the old file, and the user will not be able to give the new file a different name. In this case, the old file must either be removed from the destination, or one of the previously mentioned settings must be turned on.
Troubleshooting 301

Verify all network connections and that the network settings of the printer are configured appropriately. For information on networking the printer, see the Networking Guide on the Software and Documentation CD that came with the printer.
FOR NETWORKS USING LDAP AUTHENTICATION, MAKE SURE LDAP SETTINGS HAVE BEEN CONFIGURED CORRECTLY
Verify that LDAP settings are configured appropriately in your printer setup, and in the setup dialog. For more information on LDAP settings, contact your system support person.
On the application Edit Destination screen, clear the contents of the Path Suffix field; or on the destination server, change the user home folder to match the contents of the Path Suffix field.
Some flash drives may not be compatible with the printer. At a minimum, the flash drive should:
For a list of tested and approved flash drives, visit the Lexmark Web site at www.lexmark.com.
If nothing happens within a few seconds after you insert your USB drive into the MFP, then use of USB drives may be disabled on the device. Contact your system support person for more information.
If you forget the password for your My MFP profile, then you must delete the profile from your USB drive, insert the drive into an MFP, and then run the setup wizard again. To manually delete the My MFP profile from your USB drive:
1 Insert your USB drive into a computer.
2 Locate the .mymfp.preferences file, as well as any other files beginning with .mymfp (they will be grouped together).
3 Delete all files beginning with .mymfp.
Troubleshooting 302

Try one or more of the following:
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
1 Turn the printer off using the power switch.
2 Unplug the power cord from the wall outlet, and then from the printer.
3 Check the connection between the option and the printer.
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or go to www.lexmark.com to view the option instruction sheet.
From the computer you are printing from, select the option.
For more information, see “Updating available options in the printer driver” on page 47.
Try one or more of the following:
1 Open the paper tray.
2 Check for paper jams or misfeeds.
3 Make sure the paper guides are aligned against the edges of the paper.
4 Make sure the paper tray closes properly.
Turn the printer off, wait about 10 seconds, and then turn the printer on.
Troubleshooting 303

If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet.
C HECK THE DRAWER CONNECTION
Make sure the 2,000‑sheet drawer is properly connected to the printer.
If the tray is empty, then load paper in the tray or feeder.
Open the tray or feeder, and then remove any jammed paper.
Make sure the memory card is securely connected to the printer system board.
Make sure the flash memory card is securely connected to the printer system board.
Make sure the printer hard disk is securely connected to the printer system board.
Troubleshooting 304

Try one or more of the following:
Make sure the ISP is securely connected to the printer system board.
Make sure you are using the correct cable and that it is securely connected to the Internal Solutions (ISP) port.
For information on installing the network printing software, see the Networking Guide on the Software and Documentation CD.
Try one or more of the following:
For more information on installing the network printing software, do the following:
1 Open the Software and Documentation CD.
2 Click Additional.
3 Under Publications on this CD, select Networking Guide.
C HECK THE USB/ PARALLEL INTERFACE CARD CONNECTION
Make sure the USB/parallel interface card is securely connected to the printer system board.
Make sure you are using the correct cable and that it is securely connected.
Troubleshooting 305

Try one or more of the following:
Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.
MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY
Make sure the paper does not exceed the maximum paper fill indicator located in the tray or feeder.
MAKE SURE THE ENTIRE PAPER STACK IS SITTING FLAT IN THE TRAY
Before loading the paper, do the following:
Move the guides in the tray to the correct positions for the paper size loaded.
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.
C HECK THE PAPER PATH
The paper path is not clear. Clear jammed paper from the entire paper path, and then touch Continue.
T URN ON J AM R ECOVERY
1 From the home screen, navigate to:
> Settings > General Settings > Print Recovery
2 Touch the arrows next to Jam Recovery until On or Auto appears.
3 Touch Submit.
Troubleshooting 306

If these suggestions do not correct the problem, then contact customer support. You may have a printer part that requires adjustment or replacement.
If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.
Try one or more of the following:
Move the width and length guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel Paper menu, check the Paper Size setting.
You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).
Troubleshooting 307

ABCDE
ABCDE ABCDE
C HECK THE T ONER D ARKNESS SETTING
Select a lighter Toner Darkness setting:
Replace the toner cartridge.
ABCD ABCD ABCD
These are possible solutions. Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel Paper menu, check the Paper Size setting.
Troubleshooting 308

ABCDE ABCDE
ABCDE ABCDE ABCDE
Try one or more of the following:
Replace the defective toner cartridge.
Replace the defective photoconductor unit.
Replace the defective transfer module.
1 Open the front door, and then the internal cover.
2 Locate the printhead wipers.
3 Gently pull the printhead wiper out until it stops, and then slowly slide it back into place.
4 Clean the remaining three printhead lenses.
Try one or more of the following:
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.
Troubleshooting 309

Try one or more of the following:
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE
Replace the worn or defective toner cartridge.
Replace the defective transfer module. For more information, see the instruction sheet that came with the replacement part.
Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.
Troubleshooting 310

Try one or more of the following:
The Toner Darkness setting may be too dark, the Brightness setting may be too dark, or the Contrast setting may be too high.
The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.
C HECK THE P APER T YPE SETTING
Make sure the paper type setting matches the paper loaded in the tray or feeder:
Troubleshooting 311

Try one or more of the following:
The Toner Darkness setting may be too light, the Brightness setting may be too light, or the Contrast setting may be too low.
The paper may have absorbed moisture from high humidity. Store paper in its original wrapper until you use it.
C HECK THE P APER T YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray or feeder:
MAKE SURE THE PRINT OR TONER CARTRIDGE IS NOT LOW ON TONER
1 Remove the cartridge.
2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3 Reinsert the cartridge.
If the problem continues, then the printer may need to be serviced.
Troubleshooting 312

Try one or more of the following:
MAKE SURE THERE IS NO PACKING MATERIAL LEFT ON THE PRINT OR TONER CARTRIDGE
Remove the cartridge and make sure the packing material is properly removed. Reinstall the cartridge.
MAKE SURE THE PRINT OR TONER CARTRIDGE IS NOT LOW ON TONER
1 Remove the cartridge.
2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3 Reinsert the cartridge.
If the problem continues, then the printer may need to be serviced.
Try one or more of the following:
Replace the cartridge of the color with the repeating defect, if the defects occur in the following instances:

Replace the photoconductor of the color with the repeating defect, if the defects occur in the following instances:
Replace the fuser if print defects occur in the following instances:
ABCDE ABCDE ABCDE ABCDE ABCDE
ABCDE
C HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1 From the Paper menu on the printer control panel, check the Paper Type and Paper Weight settings.
Replace the defective photoconductor.
MAKE SURE THE PRINT OR TONER CARTRIDGE IS NOT LOW ON TONER
1 Remove the cartridge.
2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3 Reinsert the cartridge.
Troubleshooting 314

If the problem continues, the printer may need to be serviced.
Try one or more of the following:
Adjust the length and width guides in the tray to the correct positions for the paper size loaded.
Make sure you are using paper that meets the printer specifications.
MAKE SURE THE PRINTER IS CLEAN OR IS NOT CONTAMINATED WITH PAPER DUST
Clean the exterior of the printer
1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove paper from the standard exit bin.
3 Dampen a clean, lint-free cloth with water.
4 Wipe only the exterior of the printer, making sure to include the standard exit bin.
5 Make sure the paper support and standard exit bin are dry before beginning a new print job.
MAKE SURE THE PAPER FEED ROLLERS ARE CLEAN AND ARE NOT CONTAMINATED WITH DUST
1 Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
2 Remove the paper feed rollers.
3 Dampen a clean, lint-free cloth with water.
Troubleshooting 315

4 Clean the paper feed rollers.
5 Reinstall the paper feed rollers.
M AKE SURE THE PHOTOCONDUCTOR IS NOT DEFECTIVE AND IS INSTALLED CORRECTLY
Remove and then reinstall the photoconductor. If the problem continues, then the photoconductor may need to be replaced.
Try one or more of the following:
If the fill pattern is incorrect, choose a different fill pattern from your software program.
Troubleshooting 316

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge:
1 Remove the print cartridge.
2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3 Reinsert the print cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
ABCDE ABCDE ABCDE
Try one or more of the following:
MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY TONER CARTRIDGE
Replace the worn, defective, or empty toner cartridge.
Clear any paper you see or clean any visible toner from the paper path. If the problem persists, then contact Customer Support.
Troubleshooting 317

ABCDE ABCDE ABCDE
Try one or more of the following:
MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY TONER CARTRIDGE
Replace the worn, defective, or empty toner cartridge.
Check the paper path around the toner cartridge.
Clear any paper you see.
Toner fog or background shading appears on the page
Try one or more of the following:
MAKE SURE THE TONER CARTRIDGE IS INSTALLED CORRECTLY OR IS NOT DEFECTIVE
Reinstall or replace the defective toner cartridge.
Replace the worn or defective transfer module.
Replace the word or defective photoconductor unit.
Troubleshooting 318

Replace the worn or defective fuser.
Perform color adjust from the Quality menu.
MAKE SURE THE APPLICATION HAS NOT SPECIFIED AN OFF‑WHITE BACKGROUND
Check the application settings.
Contact customer support.
Try one or more of the following:
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper Weight setting from Normal to Heavy.
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
Replace the worn or defective fuser. For more information, see the instruction sheet that came with the replacement part.
Troubleshooting 319

Try one or more of the following:
Replace the defective or worn cartridges.
Replace the defective photoconductor unit.
Transparency print quality is poor
Try one or more of the following:
Use only transparencies that meet the printer specifications.
Make sure the paper type setting is set to Transparency:
1 From the printer control panel Paper menu, check the Paper Type setting.
What is RGB color?
Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.
What is CMYK color?
Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.
Troubleshooting 320

How is color specified in a document to be printed?
Software programs typically specify document color using RGB or CMYK color combinations. Additionally, they allow users to modify the color of each object in a document. For more information, see the software program Help topics.
How does the printer know what color to print?
When a user prints a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.
Why doesn't the printed color match the color I see on the computer screen?
The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color‑matching problems, see the question, “How can I match a particular color (such as a corporate logo)?”
The printed page appears tinted. Can I adjust the color?
Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.
My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?
This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.
What is manual color correction?
When manual color correction is enabled, the printer employs user‑selected color conversion tables to process objects. However, Color Correction must be set to Manual, or no user‑defined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).
To manually apply a different color conversion table:
1 From the Quality menu, select Color Correction, and then select Manual.
2 From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.
Troubleshooting 321

Object type Color conversion tables
How can I match a particular color (such as a corporate logo)?
From the printer Quality menu, nine types of Color Samples sets are available. These are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.
By examining Color Samples sets, a user can identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to utilize the selected color conversion table for the particular object.
Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented.
Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist in which the software program or the computer operating system adjusts the RGB or CMYK combinations specified in the program through color management. The resulting printed color may not be an exact match of the Color Samples pages.
What are detailed Color Samples and how do I access them?
Detailed Color Samples sets are available only through the Embedded Web Server of a network printer. A detailed Color Samples set contains a range of shades (displayed as colored boxes) that are similar to a user‑defined RGB or CMYK value. The likeness of the colors in the set are dependent on the value entered in the RGB or CMYK Increment box.

To access a detailed Color Samples set from the Embedded Web Server:
1 Type the printer IP address or host name in the address field of your Web browser.
2 Click Configuration > Color Samples > Detailed Options.
3 Select a color conversion table.
4 Enter the RGB or CMYK color number.
5 Enter an increment value from 1–255.
6 Click Print.
Try one or more of the following:
Make sure the printer and computer are turned on and connected to the same network.
Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server. For more information, contact your system support person.
When you call customer support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.
You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.
In the U.S. or Canada, call 1‑800‑539‑6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.
Troubleshooting 323

Product name:
Machine type:
Model(s):
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA
© 2011 Lexmark International, Inc.
All rights reserved.
Lexmark X746x, X748x · 576, 776 · April 2012

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
MarkTrack and PrintCryption are trademarks of Lexmark International, Inc.
Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.
The following terms are trademarks or registered trademarks of these companies:
Albertus The Monotype Corporation plc
Antique Olive Monsieur Marcel OLIVE
Apple-Chancery Apple Computer, Inc.
Arial The Monotype Corporation plc
CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation
Chicago Apple Computer, Inc.
Clarendon Linotype-Hell AG and/or its subsidiaries
Geneva Apple Computer, Inc.
GillSans The Monotype Corporation plc
Helvetica Linotype-Hell AG and/or its subsidiaries
Hoefler Jonathan Hoefler Type Foundry
ITC Avant Garde Gothic International Typeface Corporation
ITC Bookman International Typeface Corporation
ITC Mona Lisa International Typeface Corporation
ITC Zapf Chancery International Typeface Corporation
Joanna The Monotype Corporation plc
Monaco Apple Computer, Inc.
New York Apple Computer, Inc.
Eurostile Nebiolo · Marigold Arthur Baker · Oxford Arthur Baker

Palatino Linotype-Hell AG and/or its subsidiaries
Stempel Garamond Linotype-Hell AG and/or its subsidiaries
Times New Roman The Monotype Corporation plc
Univers Linotype-Hell AG and/or its subsidiaries
All other trademarks are the property of their respective owners.
AirPrint and the AirPrint logo are trademarks of Apple, Inc.
This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Wireless‑equipped models contain the following modular component(s):
Lexmark regulatory type/model LEX-M01-003; FCC ID: IYLM01003; IC: 2376A-M01003
Taffy Agfa Corporation

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1-meter average sound pressure, dBA
Values are subject to change. See www.lexmark.com for current values.
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.
Ambient temperature 15.6-32.2°C (60-90°F)
Shipping and storage temperature -40° to 40°C (-40 to 104°F)

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
A laser notice label may be affixed to this printer as shown:

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku. FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen. GEVAAR - Onzichtbare laserstraling wanneer cartridges worden verwijderd en een vergrendeling wordt genegeerd. Voorkom blootstelling aan de laser.
ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser. VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget.
ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.
危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from electronic inputs. 560 W
Copy The product is generating hard‑copy output from hard‑copy original documents.
Scan The product is scanning hard‑copy documents. 85 W
Ready The product is waiting for a print job. 55 W
Sleep Mode The product is in a high‑level energy‑saving mode. 11.0 W
Hibernate The product is in a low‑level energy‑saving mode. 0.5 W
Off The product is plugged into a wall outlet, but the power switch is turned off. 0 W
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.
Factory default Sleep Mode Timeout for this product (in minutes): 30
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.
This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
This section contains regulatory information pertaining to products that contain telecommunication terminal equipment such as facsimile.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.
This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.
A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
See your user documentation in order to program this information into your fax machine.
This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.
Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
This equipment uses CA11A telephone jacks.
Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.
Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.

Cet équipement utilise des prises de téléphone CA11A.
The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:
This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.
Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.
Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109 o 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.
Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Refer to the table at the end of the Notices section for further compliance information.
This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.
The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
Este equipamento opera em carater secundario, isto e, nao tem direito a protecao contra interferencia prejudicial, mesmo de estacoes do mesmo tipo, e nao pode causar interferencia a sistemas operando em carater primario. (Res.ANATEL 282/2001).
This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on radio equipment and telecommunications terminal equipment, and the ecodesign of energy-using products.
Compliance is indicated by the CE marking.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.
Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product may be used in the countries indicated in the table below.
AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.
Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.
Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.
Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.
Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.
Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.
Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky
príslušné ustanovenia smernice 1999/5/ES.
Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Lexmark X746x, X748x

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
Lexmark warrants that this product:
—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
—Is, during normal use, free from defects in material and workmanship
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.
To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.
The replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.
Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at www.lexmark.com/support.
Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
Warranty service does not include repair of failures caused by:
—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.
Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.










Index 350
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.