EN
Lexmark logo
Official user manual

Lexmark MX710DHE

368 pages·15.6 MB·Printer·PDF·ENDEFRITNLJA
Lexmark MX710DHE
Table of Contents 568 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 1 of the Lexmark MX710DHE user manual — November 2012 www.lexmark.com
Page 1 · click to enlarge
Page 1

MX710 Series

User's Guide

November 2012 www.lexmark.com

Machine type(s):

Model(s):

036, 037, 236, 237

Page 2 of the Lexmark MX710DHE user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 7 of the Lexmark MX710DHE user manual — Safety information
Page 7 · click to enlarge
Page 7

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Use only the telecommunications (RJ‑11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Safety information 7

Page 8 of the Lexmark MX710DHE user manual — Safety information
Page 8 · click to enlarge
Page 8

Refer service or repairs, other than those described in the user documentation, to a service representative.

SAVE THESE INSTRUCTIONS.

Safety information 8

Page 9 of the Lexmark MX710DHE user manual — Learning about the printer
Page 9 · click to enlarge
Page 9

Learning about the printer 9

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides are available on the Software and Documentation CD. For updates, visit our Web site at http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then look for Printer and Software Documentation under the Pubs folder. From the list of publications, click the Networking Guide link. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 10 of the Lexmark MX710DHE user manual — Selecting a location for the printer
Page 10 · click to enlarge
Page 10

Learning about the printer 10

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark Support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the US—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:
Ambient temperature15.6 to 32.2°C (60 to 90°F) Storage temperature1 to 35°C (34 to 95°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 11 of the Lexmark MX710DHE user manual — Printer configurations
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Lexmark MX710DHE — Printer configurations diagram (page 11)
Fig. 1 · Printer configurations
1Right side15 cm (6 in.) 2Front39.4 cm (15.5 in.) 3Left side15 cm (6 in.) 4Rear15 cm (6 in.) 5Top15 cm (6 in.)

Printer configurations

Page 12 of the Lexmark MX710DHE user manual — Basic model
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Basic model

Lexmark MX710DHE — Basic model diagram (page 12)
Fig. 2 · Basic model

1 Automatic document feeder (ADF)

2ADF tray 3ADF bin 4Standard bin 5Printer control panel 6100‑sheet multipurpose feeder

7 Standard 550‑sheet tray

Page 13 of the Lexmark MX710DHE user manual — Understanding the basic functions of the scanner
Page 13 · click to enlarge
Page 13

Learning about the printer 13

Fully configured model

The following illustration shows the maximum number of optional trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MX710DHE — Fully configured model diagram (page 13)
Fig. 3 · Fully configured model

1 Optional 550‑sheet tray

2 Optional 250‑sheet trays

4 Optional 2100‑sheet tray

When using optional trays:

  • Always use a caster base when the printer is configured with an optional 2100 ‑ sheet tray.
  • The optional 2100 ‑ sheet tray must always be at the bottom of a configuration and may be paired with only one optional 250 ‑ or 550 ‑ sheet tray.
  • You may combine three optional 250 ‑ or 550 ‑ sheet trays and install them in any order.

Understanding the basic functions of the scanner

  • Make quick copies or set the printer to perform specific copy jobs.
  • Send a fax using the printer control panel.
  • Send a fax to multiple fax destinations at the same time.
  • Scan documents and send them to your computer, an e-mail address, a flash drive, or an FTP destination.
  • Scan documents and send them to another printer (PDF through an FTP).

3 Caster base

Page 14 of the Lexmark MX710DHE user manual — Using the scanner glass
Page 14 · click to enlarge
Page 14

Learning about the printer 14

Using the ADF and scanner glass

Automatic document feeder (ADF) Scanner glass

Lexmark MX710DHE — Using the ADF and scanner glass diagram (page 14)
Fig. 4 · Using the ADF and scanner glass
Lexmark MX710DHE — Using the ADF and scanner glass diagram (page 14)
Fig. 5 · Using the ADF and scanner glass

ABC

Use the ADF for multiple‑page documents including two- sided (duplex) pages.

Use the scanner glass for single‑page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

You can use the ADF or the scanner glass to scan documents.

Using the ADF

When using the ADF:

  • Load the document into the ADF tray faceup, short edge first.
  • Load up to 150 sheets of plain paper into the ADF tray.
  • Scan sizes from 76.2 x 127 mm (3 x 5 inches) wide to 216 x 635 mm (8.5 x 25 inches) long
  • Scan media weighs from 52 to 120 g/m 2 (14–32 lb).
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Using the scanner glass

When using the scanner glass:

  • Place a document facedown on the scanner glass in the corner with the green arrow.
  • Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches).
  • Copy books up to 25.3 mm (1 inch) thick.
Page 15 of the Lexmark MX710DHE user manual — Understanding the colors of the Sleep button and indicator lights
Page 15 · click to enlarge
Page 15

Understanding the printer control panel 15

Understanding the printer control panel

Using the printer control panel

Lexmark MX710DHE — Understanding the printer control panel diagram (page 15)
Fig. 6 · Understanding the printer control panel

1 @ ! . 2 A B C 3 D E F

4 G H I 5 J K L 6 M N O

7 P Q R S 8 T U V 9 W X Y Z

Lexmark MX710DHE — Understanding the printer control panel diagram (page 15)
Fig. 7 · Understanding the printer control panel
  • 1 Display
  • View the printer status and messages.
  • Set up and operate the printer.

3 Sleep button Enable Sleep mode or Hibernate mode.

Do the following to wake the printer from Sleep mode:

  • Touch the screen or press any hard button.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset (POR) with the main power switch.
  • Attach a device to the USB port on the printer.

5 Start button Start a job, depending on which mode is selected.

6 Clear All / Reset button Reset the default settings of a function, such as copying, faxing, or scanning.

8 Indicator light Check the status of the printer.

9 USB port Connect a flash drive to the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Page 16 of the Lexmark MX710DHE user manual — Understanding the home screen
Page 16 · click to enlarge
Page 16

Understanding the printer control panel 16

Indicator light color and its corresponding printer status

Lexmark MX710DHE — Indicator light color and its corresponding printer status diagram (page 16)
Fig. 8 · Indicator light color and its corresponding printer…

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Sleep button light color and its corresponding printer status

Lexmark MX710DHE — Sleep button light color and its corresponding printer status diagram (page 16)
Fig. 9 · Sleep button light color and its corresponding print…

Off The printer is off, idle or in Ready state.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Touch the home screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or to respond to messages.

2 3 4 5

Lexmark MX710DHE — Understanding the home screen diagram (page 16)
Fig. 10 · Understanding the home screen
Lexmark MX710DHE — Understanding the home screen diagram (page 16)
Fig. 11 · Understanding the home screen

1 Change Language Launch the Change Language pop‑up window that lets you change the primary language of the printer.

2 Copy Access the Copy menus and make copies.

3 Fax Access the Fax menus and send fax.

4 E-mail Access the E-mail menus and send e‑mails.

12 11 10

Page 17 of the Lexmark MX710DHE user manual — Features
Page 17 · click to enlarge
Page 17

Understanding the printer control panel 17

5 FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server.

6 Arrows Scroll up or down.

7 Forms and Favorites Quickly find and print frequently used online forms.

8 Menu icon Access the printer menus.

9 Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links.

10 USB Drive View, select, print, scan, or e‑mail photos and documents from a flash drive.

11 Held Jobs Display all current held jobs.

  • 12 Status/Supplies
  • Show a warning or error message whenever the printer requires intervention to continue processing.
  • Access the messages screen for more information on the message, and how to clear it.

13 Tips Open a context-sensitive Help dialog.

14 Search Held Jobs Search for one or more of the following items:

  • User name for held or confidential print jobs
  • Job names for held jobs, excluding confidential print jobs
  • Profile names
  • Bookmark container or print job names
  • USB container or print job names for supported file types

Features

A menu trail line is located at the top of each menu screen. This feature shows the path taken to arrive at the current menu.

Example:

Touch any of the underlined words to return to that menu. Number of Copies is not underlined because it is the current screen. If you touch an underlined word on the “Number of Copies” screen before the number of copies is set and saved, then the selection is not saved, and it does not become the default setting.

Menus > Settings > Copy Settings > Number of Copies

Attendance message alert If an attendance message affects a function, then this icon appears and the red indicator light blinks.

Touch To · Feature Description · Menu trail line

Page 18 of the Lexmark MX710DHE user manual — 7 6 3 4
Page 18 · click to enlarge
Page 18

Understanding the printer control panel 18

  • Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Toner Low or Cartridge Low .
  • Show intervention messages so the printer can continue processing.

The IP address of your network printer is located at the upper left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server so you can view and remotely configure printer settings even when you are not physically near the printer.

Example:

123.123.123.123

Using the touch-screen buttons

Lexmark MX710DHE — Using the touch-screen buttons diagram (page 18)
Fig. 12 · Using the touch-screen buttons

7 6 3 4

1 Arrows View a list of options.

2 Copy It Print a copy.

3 Advanced Options Select a copy option.

4 Home Go to the home screen.

5 Increase Select a higher value.

6 Decrease Select a lower value.

7 Tips Open a context-sensitive Help dialog.

Feature Description · Printer IP address · Touch To

Page 19 of the Lexmark MX710DHE user manual — Other touch-screen buttons
Page 19 · click to enlarge
Page 19

Understanding the printer control panel 19

Other touch-screen buttons

Save a setting.

  • Cancel an action or a selection.
  • Exit a screen and return to the previous screen without saving changes.

Reset values on the screen.

Show 4 more labels / short text on this page
Touch To · Accept · Cancel · Reset
Page 20 of the Lexmark MX710DHE user manual — In Windows 7 or earlier
Page 20 · click to enlarge
Page 20

Setting up and using the home screen applications 20

Setting up and using the home screen applications

  • Your home screen, icons, and buttons may vary depending on your home screen customization settings, administrative setup, and active applications.
  • There may be additional solutions and applications available for purchase. To learn more, visit <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or inquire at your point of purchase.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Finding the IP address of the computer

The computer IP address is required when setting up home screen applications, such as:

  • Forms and Favorites
  • Multi Send
  • Scan to Network

For Windows users

1 Open the command window.

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type cmd > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type cmd.

c Press Enter, or click OK.

2 Type ipconfig, and then click Go or press Enter.

a Click

Page 21 of the Lexmark MX710DHE user manual — Customizing the home screen
Page 21 · click to enlarge
Page 21

Setting up and using the home screen applications 21

3 Look for IP Address.

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Network

2 Click Ethernet, Wi‑Fi, or AirPort.

3 Click Advanced > TCP/IP.

4 Look for IPv4 Address.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide the icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the home screen.

Page 22 of the Lexmark MX710DHE user manual — Finding information about the home screen applications
Page 22 · click to enlarge
Page 22

Setting up and using the home screen applications 22

Understanding the different applications

Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy” on page 23.

Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 120.

Forms and Favorites Quickly find and print frequently used online forms directly from the printer home screen. For more

information, see “Setting up Forms and Favorites” on page 23.

Multi Send Scan a document, and then send it to multiple destinations. For more information, see “Setting up Multi Send” on page 25.

MyShortcut Create shortcuts directly on the printer home screen. For more information, see “Using MyShortcut” on page 24.

Scan to E‑mail Scan a document, and then send it to an e‑mail address. For more information, see “E-mailing” on page 113.

Scan to Computer Scan a document, and then save it to a predefined folder on a host computer. For more information, see “Setting up Scan to Computer” on page 147.

Scan to FTP Scan documents directly to a File Transfer Protocol (FTP) server. For more information, see “Scanning to an FTP address” on page 144.

Scan to Network Scan a document, and then send it to a network shared folder. For more information, see “Setting up Scan to Network” on page 26.

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 21.

For more information on configuring and using the home screen applications, do the following:

  • 1 Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then do either of the following:
  • Click Business Solutions , and then select the name of the application.
  • Click Software and Solutions , and then select either of the following: – Scan to Network —Find information about the Scan to Network application. – Other Applications —Find information about the other applications.

2 Click the Manuals tab, and then select the document for the home screen application.

Use To

Page 23 of the Lexmark MX710DHE user manual — Setting up Card Copy
Page 23 · click to enlarge
Page 23

Setting up and using the home screen applications 23

Setting up Forms and Favorites

Lexmark MX710DHE — Setting up Forms and Favorites diagram (page 23)
Fig. 13 · Setting up Forms and Favorites

Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 20.
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Setting up Card Copy

Quickly and easily copy insurance, identification, and other wallet‑size cards.

Lexmark MX710DHE — Setting up Card Copy diagram (page 23)
Fig. 14 · Setting up Card Copy

You can scan and print both sides of a card on a single page, saving paper and showing the information on the card in a more convenient manner.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Card Copy.

Use To · Use To

Page 24 of the Lexmark MX710DHE user manual — Using MyShortcut
Page 24 · click to enlarge
Page 24

Setting up and using the home screen applications 24

  • 3 Change the default scanning options, if necessary.
  • Default tray —Select the default tray to be used for printing scan images.
  • Default number of copies —Specify the number of copies that should automatically print when the application is used.
  • Default contrast setting —Specify a setting to increase or decrease the level of contrast when a copy of the scanned card is printed. Select Best for Content if you want the printer to adjust the contrast automatically.
  • Default scale setting —Set the size of the scanned card when printed. The default setting is 100% (full size).
  • Resolution setting —Adjust the quality of the scanned card.

– When scanning a card, make sure the scan resolution is not more than 200 dpi for color, and 400 dpi for

black and white. – When scanning multiple cards, make sure the scan resolution is not more than 150 dpi for color, and

300 dpi for black and white. • Print Borders—Select the check box to print the scan image with a border around it.

4 Click Apply.

To use the application, touch Card Copy on the printer home screen, and then follow the instructions.

Using MyShortcut

Lexmark MX710DHE — Using MyShortcut diagram (page 24)
Fig. 15 · Using MyShortcut

Create shortcuts on the printer home screen, with settings for up to 25 frequently used copy, fax, or e- mail jobs.

To use the application, touch MyShortcut, and then follow the instructions on the printer display.

Use To

Page 25 of the Lexmark MX710DHE user manual — Setting up Multi Send
Page 25 · click to enlarge
Page 25

Setting up and using the home screen applications 25

Setting up Multi Send

Lexmark MX710DHE — Setting up Multi Send diagram (page 25)
Fig. 16 · Setting up Multi Send

Scan a document, and then send the scanned document to multiple destinations.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Multi Send.

3 From the Profiles section, click Add, and then customize the settings.

  • See the mouse ‑ over help beside each field for a description of the setting.
  • If you select FTP or Share Folder as a destination, then make sure the location settings of the destination are correct. Type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 20.

4 Click Apply.

To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printer display.

Use To

Page 26 of the Lexmark MX710DHE user manual — Setting up Remote Operator Panel
Page 26 · click to enlarge
Page 26

Setting up and using the home screen applications 26

Setting up Scan to Network

Lexmark MX710DHE — Setting up Scan to Network diagram (page 26)
Fig. 17 · Setting up Scan to Network

Scan a document and send it to a shared network folder. You can define up to 30 unique folder destinations.

  • The printer must have permission to write to the destinations. From the computer where the destination is specified, use sharing, security, and firewall settings to allow the printer at least a write access. For help, see the documentation that came with your operating system.
  • The Scan to Network icon appears only when one or more destinations are defined.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Scan to Network.

3 Specify the destinations, and then customize the settings.

  • See the mouse-over help beside some of the fields for a description of the setting.
  • To make sure the location settings of the destination are correct, type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 20.
  • Make sure the printer has access rights to the folder where the specified destination is located.

4 Click Apply.

To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display.

Setting up Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the network printer.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

3 Select the Enabled check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Use To

Page 27 of the Lexmark MX710DHE user manual — Exporting and importing a configuration
Page 27 · click to enlarge
Page 27

Setting up and using the home screen applications 27

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration file is

saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .
Page 28 of the Lexmark MX710DHE user manual — Available internal options
Page 28 · click to enlarge
Page 28

Additional printer setup 28

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

  • Memory card – DDR3 DIMM – Flash memory
  • Fonts
  • Firmware cards – Forms barcode – PRESCRIBE – IPDS – Printcryption
  • Lexmark TM Internal Solutions Ports (ISP) – Parallel 1284-B interface – MarkNet TM N8350 802.11 b/g/n wireless printer server – MarkNet N8130 10/100 fiber interface – RS-232-C serial interface
Page 29 of the Lexmark MX710DHE user manual — Accessing the controller board
Page 29 · click to enlarge
Page 29

Additional printer setup 29

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Open the controller board access cover.

Lexmark MX710DHE — Accessing the controller board diagram (page 29)
Fig. 18 · Accessing the controller board

2 Using a screwdriver, loosen the screws on the controller board shield.

Lexmark MX710DHE — Accessing the controller board diagram (page 29)
Fig. 19 · Accessing the controller board
Lexmark MX710DHE — Accessing the controller board diagram (page 29)
Fig. 20 · Accessing the controller board
Page 30 of the Lexmark MX710DHE user manual — Accessing the controller board
Page 30 · click to enlarge
Page 30

Additional printer setup 30

3 Remove the shield.

Lexmark MX710DHE — Accessing the controller board diagram (page 30)
Fig. 21 · Accessing the controller board
Lexmark MX710DHE — Accessing the controller board diagram (page 30)
Fig. 22 · Accessing the controller board

4 Use the following illustration to locate the appropriate connector.

Lexmark MX710DHE — Accessing the controller board diagram (page 30)
Fig. 23 · Accessing the controller board

1 Lexmark Internal Solutions Port or printer hard disk connector

2 Option card connector

3 Memory card connector

Page 31 of the Lexmark MX710DHE user manual — Accessing the controller board
Page 31 · click to enlarge
Page 31

Additional printer setup 31

5 Reattach the shield, and then align the screws with the holes.

Lexmark MX710DHE — Accessing the controller board diagram (page 31)
Fig. 24 · Accessing the controller board

6 Tighten the screws on the shield.

Lexmark MX710DHE — Accessing the controller board diagram (page 31)
Fig. 25 · Accessing the controller board
Page 32 of the Lexmark MX710DHE user manual — Installing a memory card
Page 32 · click to enlarge
Page 32

Additional printer setup 32

7 Close the access cover.

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

An optional memory card can be purchased separately and attached to the controller board.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 29.

2 Unpack the memory card.

Page 33 of the Lexmark MX710DHE user manual — Installing a memory card
Page 33 · click to enlarge
Page 33

Additional printer setup 33

3 Align the notch (1) on the memory card with the ridge (2) on the connector.

Lexmark MX710DHE — Installing a memory card diagram (page 33)
Fig. 26 · Installing a memory card

4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

Lexmark MX710DHE — Installing a memory card diagram (page 33)
Fig. 27 · Installing a memory card

5 Reattach the controller board shield, and then the controller board access cover.

Page 34 of the Lexmark MX710DHE user manual — Installing an optional card
Page 34 · click to enlarge
Page 34

Additional printer setup 34

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 29.

2 Unpack the optional card.

3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Lexmark MX710DHE — Installing an optional card diagram (page 34)
Fig. 28 · Installing an optional card
Page 35 of the Lexmark MX710DHE user manual — Installing an optional card
Page 35 · click to enlarge
Page 35

Additional printer setup 35

4 Push the card firmly into place as shown in the illustration.

Lexmark MX710DHE — Installing an optional card diagram (page 35)
Fig. 29 · Installing an optional card

5 Close the controller board access door.

Page 36 of the Lexmark MX710DHE user manual — Installing an Internal Solutions Port
Page 36 · click to enlarge
Page 36

Additional printer setup 36

Installing an Internal Solutions Port

The controller board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 29.

2 If a printer hard disk is installed, then remove the printer hard disk first.

For more information, see “Removing a printer hard disk” on page 47.

3 Unpack the ISP kit.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 36)
Fig. 30 · Installing an Internal Solutions Port
Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 36)
Fig. 31 · Installing an Internal Solutions Port

2 Screw for attaching the plastic bracket to the ISP

3 Screws for attaching the ISP mounting bracket to the controller board shield

1 ISP solution · 4 Plastic bracket

Page 37 of the Lexmark MX710DHE user manual — Installing an Internal Solutions Port
Page 37 · click to enlarge
Page 37

Additional printer setup 37

4 Remove the metal cover from the ISP opening. a Loosen the screw.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 37)
Fig. 32 · Installing an Internal Solutions Port

b Lift the metal cover, and then pull it out completely.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 37)
Fig. 33 · Installing an Internal Solutions Port
Page 38 of the Lexmark MX710DHE user manual — Installing an Internal Solutions Port
Page 38 · click to enlarge
Page 38

Additional printer setup 38

5 Align the posts of the plastic bracket to the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 38)
Fig. 34 · Installing an Internal Solutions Port

6 Install the ISP on the plastic bracket.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 38)
Fig. 35 · Installing an Internal Solutions Port
Page 39 of the Lexmark MX710DHE user manual — Installing an Internal Solutions Port
Page 39 · click to enlarge
Page 39

Additional printer setup 39

7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 39)
Fig. 36 · Installing an Internal Solutions Port
Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 39)
Fig. 37 · Installing an Internal Solutions Port

8 Use the provided thumbscrew for the ISP to attach the plastic bracket to the ISP.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 39)
Fig. 38 · Installing an Internal Solutions Port
Page 40 of the Lexmark MX710DHE user manual — Installing an Internal Solutions Port
Page 40 · click to enlarge
Page 40

Additional printer setup 40

9 Attach the two provided screws to secure the ISP mounting bracket to the controller board shield.

Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 40)
Fig. 39 · Installing an Internal Solutions Port
Lexmark MX710DHE — Installing an Internal Solutions Port diagram (page 40)
Fig. 40 · Installing an Internal Solutions Port

10 Tighten the thumbscrew that is attached to the ISP.

Page 41 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 41 · click to enlarge
Page 41

Additional printer setup 41

11 Connect the ISP solution interface cable into the receptacle of the controller board.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 41)
Fig. 41 · Installing a printer hard disk
Lexmark MX710DHE — Installing a printer hard disk diagram (page 41)
Fig. 42 · Installing a printer hard disk

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 29.

2 Unpack the printer hard disk.

Page 42 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 42 · click to enlarge
Page 42

Additional printer setup 42

3 Locate the appropriate connector on the controller board cage.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 42)
Fig. 43 · Installing a printer hard disk
Lexmark MX710DHE — Installing a printer hard disk diagram (page 42)
Fig. 44 · Installing a printer hard disk
Page 43 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 43 · click to enlarge
Page 43

Additional printer setup 43

To install a printer hard disk onto the ISP:

a Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 43)
Fig. 45 · Installing a printer hard disk

b Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk down

until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 43)
Fig. 46 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Page 44 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 44 · click to enlarge
Page 44

Additional printer setup 44

Lexmark MX710DHE — Installing a printer hard disk diagram (page 44)
Fig. 47 · Installing a printer hard disk

To install a printer hard disk directly on the controller board cage:

a Align the standoffs of the printer hard disk to the holes in the controller board cage, and then press the printer

hard disk down until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 44)
Fig. 48 · Installing a printer hard disk
Page 45 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 45 · click to enlarge
Page 45

Additional printer setup 45

b Use the two provided screws to attach the printer hard disk mounting bracket.

Lexmark MX710DHE — Installing a printer hard disk diagram (page 45)
Fig. 49 · Installing a printer hard disk
Lexmark MX710DHE — Installing a printer hard disk diagram (page 45)
Fig. 50 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the controller board.

Page 46 of the Lexmark MX710DHE user manual — Installing a printer hard disk
Page 46 · click to enlarge
Page 46

Additional printer setup 46

Lexmark MX710DHE — Installing a printer hard disk diagram (page 46)
Fig. 51 · Installing a printer hard disk
Lexmark MX710DHE — Installing a printer hard disk diagram (page 46)
Fig. 52 · Installing a printer hard disk
Page 47 of the Lexmark MX710DHE user manual — Removing a printer hard disk
Page 47 · click to enlarge
Page 47

Additional printer setup 47

Removing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 29.

2 Unplug the printer hard disk interface cable from the controller board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling out the cable.

Page 48 of the Lexmark MX710DHE user manual — Removing a printer hard disk
Page 48 · click to enlarge
Page 48

Additional printer setup 48

3 Remove the screws holding the printer hard disk in place.

4 Remove the printer hard disk.

5 Set aside the printer hard disk.

Page 49 of the Lexmark MX710DHE user manual — Installing optional trays
Page 49 · click to enlarge
Page 49

Additional printer setup 49

Installing hardware options

Order of installation

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Install the printer and any hardware options you have purchased in the following order:

  • Caster base
  • 2100 ‑ sheet tray or spacer
  • Optional 550 ‑ or 250 ‑ sheet tray
  • Printer

For more information on installing a caster base, optional 250‑ or 550‑sheet tray, spacer, or 2100‑sheet tray, see the setup sheet that came with the option.

Installing optional trays

The printer supports the following optional input sources:

  • 250 ‑ or 550 ‑ sheet tray
  • 2100 ‑ sheet tray

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Page 50 of the Lexmark MX710DHE user manual — Installing hardware options
Page 50 · click to enlarge
Page 50

Additional printer setup 50

Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 53 · Installing hardware options
Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 54 · Installing hardware options
Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 55 · Installing hardware options
Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 56 · Installing hardware options

2 Unpack the optional tray, and then remove all packing material.

3 Pull out the tray completely from the base.

Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 57 · Installing hardware options
Lexmark MX710DHE — Installing hardware options diagram (page 50)
Fig. 58 · Installing hardware options

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

7 Lock the wheels of the caster base to secure the printer, then align the printer with the tray, and then slowly lower the printer into place.

Page 51 of the Lexmark MX710DHE user manual — Installing hardware options
Page 51 · click to enlarge
Page 51

Additional printer setup 51

Lexmark MX710DHE — Installing hardware options diagram (page 51)
Fig. 59 · Installing hardware options

8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Page 52 of the Lexmark MX710DHE user manual — Attaching cables
Page 52 · click to enlarge
Page 52

Additional printer setup 52

Lexmark MX710DHE — Attaching cables diagram (page 52)
Fig. 60 · Attaching cables
Lexmark MX710DHE — Attaching cables diagram (page 52)
Fig. 61 · Attaching cables
Lexmark MX710DHE — Attaching cables diagram (page 52)
Fig. 62 · Attaching cables
Lexmark MX710DHE — Attaching cables diagram (page 52)
Fig. 63 · Attaching cables

To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.

Attaching cables

Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port
Page 53 of the Lexmark MX710DHE user manual — Attaching cables
Page 53 · click to enlarge
Page 53

Additional printer setup 53

Lexmark MX710DHE — Attaching cables diagram (page 53)
Fig. 64 · Attaching cables

1 EXT port Connect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer and if this connection method is supported in your country or region.

2 LINE port Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to access the telephone line to send and receive faxes.

3 Printer power cord socket Connect the printer to a properly grounded electrical outlet.

4 USB printer port Connect the printer to a computer.

5 Ethernet port Connect the printer to a network.

6 Internal Solutions Port (ISP) or printer hard disk slot

Attach an ISP or a printer hard disk.

7 USB port Attach an optional wireless network adapter.

Use the To

Page 54 of the Lexmark MX710DHE user manual — Installing the printer software
Page 54 · click to enlarge
Page 54

Additional printer setup 54

Organizing cables

Attach the Ethernet cable and power cord, and then neatly tuck the cables in the channels at the back of the printer.

Lexmark MX710DHE — Organizing cables diagram (page 54)
Fig. 65 · Organizing cables
Lexmark MX710DHE — Organizing cables diagram (page 54)
Fig. 66 · Organizing cables

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.
  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system
Page 55 of the Lexmark MX710DHE user manual — For Windows users
Page 55 · click to enlarge
Page 55

Additional printer setup 55

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop.

3 Click Install, and then follow the instructions on the computer screen.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

a Click · In Windows 8 · a Click

Page 56 of the Lexmark MX710DHE user manual — Preparing to set up the printer on an Ethernet network
Page 56 · click to enlarge
Page 56

Additional printer setup 56

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

Networking

  • Purchase a MarkNet N8350 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the setup sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), and WPA2 are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Page 57 of the Lexmark MX710DHE user manual — For Macintosh users
Page 57 · click to enlarge
Page 57

Additional printer setup 57

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to:

Apps list > Run > type: D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

In Windows 8 · a Click

Page 58 of the Lexmark MX710DHE user manual — Preparing to set up the printer on a wireless network
Page 58 · click to enlarge
Page 58

Additional printer setup 58

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when installation is complete.

4 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network.

Page 59 of the Lexmark MX710DHE user manual — Connecting the printer using the Wireless Setup Wizard
Page 59 · click to enlarge
Page 59

Additional printer setup 59

– 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Connecting the printer using the Wireless Setup Wizard

Before you begin, make sure that:

  • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • An Ethernet cable is disconnected from the printer.
  • Active NIC is set to Auto. To set this to Auto, navigate to:

> Network/Ports > Active NIC > Auto > Submit

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

2 Select a wireless connection setup.

Search for networks Show available wireless connections.

Enter a network name Manually type the SSID.

Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.

3 Follow the instructions on the printer display.

Use To

Page 60 of the Lexmark MX710DHE user manual — Connecting the printer to a wireless network using the Embedded Web Server
Page 60 · click to enlarge
Page 60

Additional printer setup 60

Connecting the printer to a wireless network using Wi‑Fi Protected Setup

Before you begin, make sure that:

  • The access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter installed in your printer is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

Using the Push Button Configuration method

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start Push Button Method

2 Follow the instructions on the printer display.

Using the Personal Identification Number (PIN) method

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start PIN Method

2 Copy the eight‑digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

  • Your printer is connected temporarily to an Ethernet network.
  • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

Page 61 of the Lexmark MX710DHE user manual — For Windows users
Page 61 · click to enlarge
Page 61

Additional printer setup 61

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.

Changing port settings after installing a new network Internal Solutions Port

When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.

  • If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
  • If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes to your computer configurations.
  • If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network when you configure the printer to operate wirelessly. If the printer is connected to the Ethernet network, then the wireless configuration completes, but the wireless ISP is inactive. To activate the wireless ISP, disconnect the printer from the Ethernet network, turn off the printer, and then turn it back on.
  • Only one network connection is active at a time. To switch between Ethernet and wireless connection types, turn off the printer, connect the cable (to switch to an Ethernet connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on.

For Windows users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open the printers folder.

From the Search charm, type Run and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

In Windows 8 · a Click

Page 62 of the Lexmark MX710DHE user manual — Setting up serial printing
Page 62 · click to enlarge
Page 62

Additional printer setup 62

c Press Enter, or click OK.

  • 3 To select the printer that has changed, do either of the following:
  • Press and hold the printer, and then select Printer properties .
  • Right ‑ click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).

4 Click the Ports tab.

5 Select the port from the list, and then click Configure Port.

6 Type the new IP address in the “Printer Name or IP Address” field.

7 Click OK > Close.

For Macintosh users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select the printer > Add

Setting up serial printing

Use serial printing to print when the computer is far from the printer or to print at a reduced speed.

Page 63 of the Lexmark MX710DHE user manual — In Windows 8
Page 63 · click to enlarge
Page 63

Additional printer setup 63

After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer.

1 Set the parameters in the printer. a From the printer control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Save the modified settings, and then print a menu settings page.

2 Install the printer driver. a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the software installer package.

Wait for the installation dialog to appear. If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type D:\setup.exe. 3 Press Enter or click OK.

f From the Configure Printer Connection dialog, select a port. g If the port is not in the list, then click Refresh, or navigate to:

Add port > select a port type > enter the necessary information > OK h Click Continue > Finish.

3 Set the COM port parameters.

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.

In Windows 8

From the Search charm, type run and then navigate to: Apps list > Run > type devmgmt.msc > OK

1 Click

Page 64 of the Lexmark MX710DHE user manual — Printing a network setup page
Page 64 · click to enlarge
Page 64

Additional printer setup 64

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports.

c Do either of the following:

  • Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
  • Right ‑ click the COM port where you attached the serial cable to your computer (example: COM1). d From the menu that appears, select Properties . e On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.

Check the serial heading of the menu settings page for the printer settings. f Click OK, and then close all the dialogs. g Print a test page to verify printer installation.

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.
  • Network setup page —If your printer has Ethernet or wireless capability and is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page, and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

1 Click

Page 65 of the Lexmark MX710DHE user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 65 · click to enlarge
Page 65

Loading paper and specialty media 65

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 256 and “Storing paper” on page 90.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Configuring Universal paper settings

Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch Submit.

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly, and then pull it out completely.
  • Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Page 66 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 66 · click to enlarge
Page 66

Loading paper and specialty media 66

Lexmark MX710DHE — Loading paper and specialty media diagram (page 66)
Fig. 67 · Loading paper and specialty media

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MX710DHE — Loading paper and specialty media diagram (page 66)
Fig. 68 · Loading paper and specialty media
Lexmark MX710DHE — Loading paper and specialty media diagram (page 66)
Fig. 69 · Loading paper and specialty media
Page 67 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 67 · click to enlarge
Page 67

Loading paper and specialty media 67

Lexmark MX710DHE — Loading paper and specialty media diagram (page 67)
Fig. 70 · Loading paper and specialty media

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MX710DHE — Loading paper and specialty media diagram (page 67)
Fig. 71 · Loading paper and specialty media
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.
Page 68 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 68 · click to enlarge
Page 68

Loading paper and specialty media 68

Lexmark MX710DHE — Loading paper and specialty media diagram (page 68)
Fig. 72 · Loading paper and specialty media

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MX710DHE — Loading paper and specialty media diagram (page 68)
Fig. 73 · Loading paper and specialty media

5 Load the paper stack with the printable side facedown for one‑sided printing.

Lexmark MX710DHE — Loading paper and specialty media diagram (page 68)
Fig. 74 · Loading paper and specialty media

One‑sided printing Two‑sided (duplex) printing

Page 69 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 69 · click to enlarge
Page 69

Loading paper and specialty media 69

  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MX710DHE — Loading paper and specialty media diagram (page 69)
Fig. 75 · Loading paper and specialty media
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Lexmark MX710DHE — Loading paper and specialty media diagram (page 69)
Fig. 76 · Loading paper and specialty media
Page 70 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 70 · click to enlarge
Page 70

Loading paper and specialty media 70

  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MX710DHE — Loading paper and specialty media diagram (page 70)
Fig. 77 · Loading paper and specialty media
Page 71 of the Lexmark MX710DHE user manual — Loading paper and specialty media
Page 71 · click to enlarge
Page 71

Loading paper and specialty media 71

  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MX710DHE — Loading paper and specialty media diagram (page 71)
Fig. 78 · Loading paper and specialty media

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

Page 72 of the Lexmark MX710DHE user manual — Loading the 2100 ‑ sheet tray
Page 72 · click to enlarge
Page 72

Loading paper and specialty media 72

7 Insert the tray.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 72)
Fig. 79 · Loading the 2100-sheet tray

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Loading the 2100 ‑ sheet tray

1 Pull out the tray completely.

2 Adjust the width and length guides.

Page 73 of the Lexmark MX710DHE user manual — Loading the 2100-sheet tray
Page 73 · click to enlarge
Page 73

Loading paper and specialty media 73

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 73)
Fig. 80 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 73)
Fig. 81 · Loading the 2100-sheet tray

b Squeeze, and then slide the length guide to the position for A5 until it clicks into place.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 73)
Fig. 82 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 73)
Fig. 83 · Loading the 2100-sheet tray
Page 74 of the Lexmark MX710DHE user manual — Loading the 2100-sheet tray
Page 74 · click to enlarge
Page 74

Loading paper and specialty media 74

c Remove the A5 length guide from its holder.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 84 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 85 · Loading the 2100-sheet tray

d Insert the A5 length guide into its designated slot.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 86 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 87 · Loading the 2100-sheet tray

Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper

a Pull up and slide the width guide to the correct position for the size of paper you are loading.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 88 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 74)
Fig. 89 · Loading the 2100-sheet tray
Page 75 of the Lexmark MX710DHE user manual — Loading the 2100-sheet tray
Page 75 · click to enlarge
Page 75

Loading paper and specialty media 75

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide

is not attached, then proceed to step d.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 75)
Fig. 90 · Loading the 2100-sheet tray

c Put the A5 length guide in its holder.

Page 76 of the Lexmark MX710DHE user manual — LGL OFC FOLIO LTR
Page 76 · click to enlarge
Page 76

Loading paper and specialty media 76

d Squeeze, and then slide the length guide to the correct position for the paper size you are loading.

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 76)
Fig. 91 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 76)
Fig. 92 · Loading the 2100-sheet tray

LGL OFC FOLIO LTR

A4 A5

3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MX710DHE — LGL OFC FOLIO LTR diagram (page 76)
Fig. 93

4 Load the paper stack with the printable side facedown for one‑sided printing. • Make sure the paper is loaded properly.

Page 77 of the Lexmark MX710DHE user manual — Loading the 2100-sheet tray
Page 77 · click to enlarge
Page 77

Loading paper and specialty media 77

Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 77)
Fig. 94 · Loading the 2100-sheet tray

One‑sided printing Two‑sided (duplex) printing

  • Make sure the paper is below the maximum paper fill indicator.
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 77)
Fig. 95 · Loading the 2100-sheet tray
Lexmark MX710DHE — Loading the 2100-sheet tray diagram (page 77)
Fig. 96 · Loading the 2100-sheet tray

5 Insert the tray.

Page 78 of the Lexmark MX710DHE user manual — Loading the multipurpose feeder
Page 78 · click to enlarge
Page 78

Loading paper and specialty media 78

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 78)
Fig. 97 · Loading the multipurpose feeder

6 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 78)
Fig. 98 · Loading the multipurpose feeder
Page 79 of the Lexmark MX710DHE user manual — Loading the multipurpose feeder
Page 79 · click to enlarge
Page 79

Loading paper and specialty media 79

2 Pull the multipurpose feeder extender.

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 79)
Fig. 99 · Loading the multipurpose feeder

3 Slide the width guide to the correct position for the size of the paper you are loading.

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 79)
Fig. 100 · Loading the multipurpose feeder
Page 80 of the Lexmark MX710DHE user manual — Loading the multipurpose feeder
Page 80 · click to enlarge
Page 80

Loading paper and specialty media 80

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 80)
Fig. 101 · Loading the multipurpose feeder
Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 80)
Fig. 102 · Loading the multipurpose feeder

4 Prepare the paper or specialty media for loading. • Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 80)
Fig. 103 · Loading the multipurpose feeder
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

5 Load the paper or specialty media.

Page 81 of the Lexmark MX710DHE user manual — ABC
Page 81 · click to enlarge
Page 81

Loading paper and specialty media 81

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

One‑sided (simplex) printing Two‑sided (duplex) printing

Lexmark MX710DHE — Loading the multipurpose feeder diagram (page 81)
Fig. 104 · Loading the multipurpose feeder

ABC

  • Load envelopes with the flap side down and on the left of the multipurpose feeder.
Lexmark MX710DHE — ABC diagram (page 81)
Fig. 105
Page 82 of the Lexmark MX710DHE user manual — Linking and unlinking trays
Page 82 · click to enlarge
Page 82

Loading paper and specialty media 82

Lexmark MX710DHE — Linking and unlinking trays diagram (page 82)
Fig. 106 · Linking and unlinking trays
Lexmark MX710DHE — Linking and unlinking trays diagram (page 82)
Fig. 107 · Linking and unlinking trays

6 For custom- or Universal- size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Linking and unlinking trays

When the paper size and paper type for any trays are the same, the printer will link those trays. When one linked tray becomes empty, paper will feed from the next linked tray. We recommended giving all unique paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in will not automatically link.

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

Page 83 of the Lexmark MX710DHE user manual — Using the Embedded Web Server
Page 83 · click to enlarge
Page 83

Loading paper and specialty media 83

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

3 Touch Submit.

4 Touch Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 84 of the Lexmark MX710DHE user manual — Using the printer control panel
Page 84 · click to enlarge
Page 84

Loading paper and specialty media 84

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Touch Submit.

Page 85 of the Lexmark MX710DHE user manual — Tips on using envelopes
Page 85 · click to enlarge
Page 85

Paper and specialty media guide 85

Paper and specialty media guide

  • Make sure the paper size, type, and weight are set correctly on the computer or on the printer control panel.
  • Flex, fan, and straighten specialty media before loading it.
  • The printer may print at a reduced speed to prevent damage to the fuser.
  • For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Using specialty media

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly affect print quality.

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray.
  • Print samples on the card stock being considered for use before buying large quantities.
  • Specify the paper texture and weight from the tray settings to match the paper loaded in the tray.
  • Preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper feed problems.
  • Before loading the card stock on the tray, flex and fan the card stock to loosen them. Straighten the edges on a level surface.

Tips on using envelopes

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the envelopes loaded in the tray.
  • Print samples on the envelopes being considered for use before buying large quantities.
  • Use envelopes designed specifically for laser printers.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb) paper or 25% cotton.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist. – Are stuck together or damaged in any way. – Have windows, holes, perforations, cutouts, or embossing. – Have metal clasps, string ties, or folding bars. – Have an interlocking design. – Have postage stamps attached. – Have any exposed adhesive when the flap is in the sealed or closed position.
Page 86 of the Lexmark MX710DHE user manual — Tips on using letterhead
Page 86 · click to enlarge
Page 86

Paper and specialty media guide 86

  • – Have bent corners. – Have rough, cockle, or laid finishes.
  • Adjust the width guides to fit the width of the envelopes.
  • Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

Tips on using labels

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels loaded in the tray.
  • Print samples on labels being considered for use before buying large quantities.
  • For more information on label printing, characteristics, and design, see the Card Stock & Label Guide at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
  • Use labels designed specifically for laser printers.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Before loading labels on the tray, flex and fan labels to loosen them. Straighten the edges on a level surface.

Tips on using letterhead

  • Use letterhead designed specifically for laser printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex and fan the sheets to prevent them from sticking together.
  • Page orientation is important when printing on letterhead.

Source Printing Printable side Paper orientation

Trays One‑sided Facedown Load the sheet with the top edge toward the front of the tray.

Trays Two‑sided Faceup Load the sheet with the bottom edge entering the printer first.

Multipurpose feeder One‑sided Faceup Load the sheet with the top edge entering the printer first.

Multipurpose feeder Two‑sided Facedown Load the sheet with the bottom edge entering the printer first.

Page 87 of the Lexmark MX710DHE user manual — Moisture content
Page 87 · click to enlarge
Page 87

Paper and specialty media guide 87

Tips on using transparencies

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the transparencies loaded in the tray.
  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Use transparencies designed specifically for laser printers.
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex and fan the sheets to prevent them from sticking together.
  • When printing on large volumes of transparencies, make sure to print by batches of only up to 20 with an interval of at least three minutes between batches, to prevent the transparencies from sticking together in the bin. You can also remove transparencies from the bin by batches of 20.

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these factors before printing on them:

Weight

The printer trays and multipurpose feeder can automatically feed paper weights between 60–176 g/m2 (16–47‑lb) grain long paper. The 2100‑sheet tray can automatically feed paper weights up to 60–135 g/m2 (16–36‑lb) grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, and may cause jams.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Page 88 of the Lexmark MX710DHE user manual — Using recycled paper and other office papers
Page 88 · click to enlarge
Page 88

Paper and specialty media guide 88

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–176 g/m2 (16–47‑lb) paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability, resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

  • Use grain long for 60–90 ‑ g/m 2 (16–24 ‑ lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid paper with rough or heavily textured surfaces.
  • Use inks that are not affected by the resin in toner. Inks that are oxidation ‑ set or oil ‑ based generally meet these requirements; latex inks might not.
  • Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
  • When in doubt, contact your paper supplier.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
Page 89 of the Lexmark MX710DHE user manual — Unacceptable paper examples
Page 89 · click to enlarge
Page 89

Paper and specialty media guide 89

  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents
Page 90 of the Lexmark MX710DHE user manual — Paper sizes supported by the printer
Page 90 · click to enlarge
Page 90

Paper and specialty media guide 90

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

Paper sizes supported by the printer

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

2100‑sheet tray Multipurpose feeder

Duplex ADF Scanner glass

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.8 x 8.3 in.)

A6 105 x 148 mm (4.1 x 5.8 in.) X

JIS B5 182 x 257 mm (7.2 x 10.1 in.) X

Letter 216 x 279 mm (8.5 x 11 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm (5 in.) to 356 mm (14 in.).

Page 91 of the Lexmark MX710DHE user manual — X X X 3
Page 91 · click to enlarge
Page 91

Paper and specialty media guide 91

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

2100‑sheet tray Multipurpose feeder

Duplex ADF Scanner glass

Legal 216 x 356 mm (8.5 x 14 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.) X

Oficio (México) 216 x 340 mm (8.5 x 13.4 in.)

Folio 216 x 330 mm (8.5 x 13 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.) X

Universal 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.)

70 x 127 mm to 216 x 356 mm (2.76 x 5 in. to 8.5 x 14 in.)

X X X 3

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.) X X X

9 Envelope 98 x 225 mm (3.9 x 8.9 in.) X X X

10 Envelope 105 x 241 mm (4.1 x 9.5 in.) X X X

DL Envelope 110 x 220 mm (4.3 x 8.7 in.) X X X

C5 Envelope 162 x 229 mm (6.38 x 9.01 in.) X X X

B5 Envelope 176 x 250 mm (6.93 x 9.84 in.) X X X

Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm (5 in.) to 356 mm (14 in.).

Page 92 of the Lexmark MX710DHE user manual — Paper types and weights supported by the printer
Page 92 · click to enlarge
Page 92

Paper and specialty media guide 92

Paper types and weights supported by the printer

The printer engine supports 60–176‑g/m2 (16–47‑lb) paper weights.

Lexmark MX710DHE — Paper types and weights supported by the printer diagram (page 92)
Fig. 108 · Paper types and weights supported by the printer

Paper type 250‑ or 550‑sheet tray 2100‑sheet tray

* Print transparencies in batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 87.

Page 93 of the Lexmark MX710DHE user manual — Adjusting toner darkness
Page 93 · click to enlarge
Page 93

Printing

Printing forms and a document

Printing forms

Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 23.

1 From the printer home screen, navigate to:

Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings

2 Depending on your printer model, touch

, or Submit.

Printing a document

1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.

Adjusting toner darkness

1 Open a Web browser, and then type the printer IP address in the address field.

Printing 93 · ,

Page 94 of the Lexmark MX710DHE user manual — Printing from a flash drive
Page 94 · click to enlarge
Page 94
  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch Submit.

Printing from a flash drive

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark MX710DHE — Printing from a flash drive diagram (page 94)
Fig. 109 · Printing from a flash drive
  • A flash drive icon appears on the printer home screen when a flash drive is inserted.

Printing 94

Page 95 of the Lexmark MX710DHE user manual — Supported flash drives and file types
Page 95 · click to enlarge
Page 95
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, touch the document you want to print.

3 Touch the arrows to get a preview of the document.

to specify the number of copies to be printed, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Printing 95 · 4 Use · or

Page 96 of the Lexmark MX710DHE user manual — Storing print jobs in the printer
Page 96 · click to enlarge
Page 96

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the printer control panel, navigate to:

> Security > Confidential Print > select the print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

Printing 96 · Use To

Page 97 of the Lexmark MX710DHE user manual — Modifying confidential print settings
Page 97 · click to enlarge
Page 97

2 Touch Submit.

Printing confidential and other held jobs

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

  • 6 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

  • 5 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Printing 97

Page 98 of the Lexmark MX710DHE user manual — For Windows users
Page 98 · click to enlarge
Page 98
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Configuration > Other Settings tab > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.

4 Save the modified settings.

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

Printing 98

Page 99 of the Lexmark MX710DHE user manual — For Macintosh users
Page 99 · click to enlarge
Page 99

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 99 · In Windows 8 · a Click

Page 100 of the Lexmark MX710DHE user manual — Copying using the ADF
Page 100 · click to enlarge
Page 100

Copying

Automatic document feeder (ADF) Scanner glass

ABC

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Making copies

Making a quick copy

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press .

Copying using the ADF

1 Load an original document faceup, short edge first into the ADF tray.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Copying 100

Page 101 of the Lexmark MX710DHE user manual — Copying on transparencies
Page 101 · click to enlarge
Page 101
  • The ADF indicator light comes on when the paper is loaded properly.

2 Adjust the paper guides.

3 From the home screen, navigate to:

Copy > specify the copy settings > Copy It

Copying using the scanner glass

1 Place an original document facedown on the scanner glass in the upper left corner.

2 From the home screen, navigate to:

Copy > specify the copy settings > Copy It

If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.

3 Touch Finish the Job.

Copying photos

1 Place a photo facedown on the scanner glass in the upper left corner.

2 From the home screen, navigate to:

Copy > Content > Photo >

3 From the Content Source menu, navigate to:

4 Touch Finish the Job.

Copying on specialty media

Copying on transparencies

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 From the home screen, navigate to:

Copy > Copy from > select the size of the original document >

Copying 101 · Photo/Film > · > Copy It

Page 102 of the Lexmark MX710DHE user manual — Creating a copy shortcut using the printer control panel
Page 102 · click to enlarge
Page 102

3 Navigate to:

Copy to > select the tray that contains transparencies > Copy It

If there are no trays that contain transparencies, then navigate to:

> select the size of the transparencies >

4 Load transparencies into the multipurpose feeder, and then touch Copy It.

Copying on letterhead

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > select the size of the original document >

4 Navigate to:

Copy to > select the tray containing the letterhead > Copy It

5 If there are no trays that support letterhead, then navigate to:

Manual Feeder > select the size of the letterhead > Letterhead

6 Load the letterhead faceup, top edge first into the multipurpose feeder, and then touch Copy It.

Creating a copy shortcut using the printer control panel

1 From the home screen, touch Copy.

2 Adjust the copy settings, and then touch Save as Shortcut.

3 Type a unique name for the shortcut, and then touch Done.

4 Verify that the shortcut name is correct, and then touch OK.

If the shortcut name is incorrect, then touch Cancel, and then reenter the information.

  • The shortcut name appears in the Copy Shortcuts icon on the printer home screen.
  • You can use the shortcut when copying another document using the same settings.

Copying 102 · Manual Feeder > · > Transparency >

Page 103 of the Lexmark MX710DHE user manual — Example 1: Copying on mixed paper sizes
Page 103 · click to enlarge
Page 103

Customizing copy settings

Copying to a different size

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > select the size of the original document >

4 Navigate to:

Copy to > select a new size for the copy >

Making copies using paper from a selected tray

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > select the size of the original document >

4 Navigate to:

Copy to > select the tray containing the paper type you want to use >

5 Touch Copy It.

Copying different paper sizes

Use the ADF to copy original documents with different paper sizes. Depending on the paper sizes loaded and the “Copy to” and “Copy from” settings, each copy is either printed on mixed paper sizes (Example 1) or scaled to fit a single paper size (Example 2).

Example 1: Copying on mixed paper sizes

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Copying 103 · > Copy It

Page 104 of the Lexmark MX710DHE user manual — Copying on both sides of the paper (duplexing)
Page 104 · click to enlarge
Page 104
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > Mixed Sizes >

4 Navigate to:

Copy to > Auto Size Match >

The scanner identifies the different paper sizes as they are scanned. Copies are printed on mixed paper sizes corresponding to the paper sizes of the original document.

Example 2: Copying on a single paper size

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > Mixed Sizes >

4 Navigate to:

Copy to > Letter >

The scanner identifies the different paper sizes as they are scanned, and then scales the mixed paper sizes to fit on the paper size selected.

Copying on both sides of the paper (duplexing)

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Copying 104 · > Copy It · > Copy It

Page 105 of the Lexmark MX710DHE user manual — Adjusting copy quality
Page 105 · click to enlarge
Page 105

3 From the home screen, navigate to:

Copy > Sides (Duplex) > select the preferred duplexing method

> Copy It.

Reducing or enlarging copies

Copies can be scaled from 25% to 400% of the original document size.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Copy.

4 From the Scale area, touch

to decrease or increase the value by 1%.

Touching “Copy to” or “Copy from” after setting Scale manually changes the scale value back to Auto.

5 Touch Copy It.

Adjusting copy quality

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

  • 4 Touch the button that best represents the content type of the document you are copying.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.
  • Photo —The original document is mostly a photo or an image.
  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
Show 4 more labels / short text on this page
Copying 105 · 4 Touch · or · Copy > Content
Page 106 of the Lexmark MX710DHE user manual — Placing separator sheets between copies
Page 106 · click to enlarge
Page 106
  • 6 Touch the button that best represents the content source of the document you are copying.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Press —The original document was printed using a printing press.
  • Black/White Laser —The original document was printed using a mono laser printer.
  • Photo/Film —The original document is a photo from a film.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.

> Copy It.

Collating copies

If you print multiple copies of a document, then you can choose to print the copies as a set (collated) or to print the copies as groups of pages (not collated).

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > enter the number of copies > Collate > select the preferred order of pages >

Placing separator sheets between copies

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Show 5 more labels / short text on this page
Copying 106 · 5 Touch · 7 Touch · Collated Not collated · > Copy It
Page 107 of the Lexmark MX710DHE user manual — Copying multiple pages onto a single sheet
Page 107 · click to enlarge
Page 107

3 From the home screen, navigate to:

Copy > Advanced Options > Separator Sheets

  • 4 Select one of the following:
  • Between Copies
  • Between Jobs
  • Between Pages
  • Off

> Copy It.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.

  • Make sure to set the paper size to letter, legal, A4, or JIS B5.
  • Make sure to set the copy size to 100%.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Advanced Options > Paper Saver > select the output you want >

Copying 107 · 5 Touch · > Copy It

Page 108 of the Lexmark MX710DHE user manual — Placing a header or footer on pages
Page 108 · click to enlarge
Page 108

Creating a custom copy job

The custom copy job or job build is used to combine one or more sets of original documents into a single copy job. Each set may be scanned using different job parameters. When a copy job is submitted and Custom Job is enabled, the scanner scans the first set of original documents using the specified settings, and then it scans the next set with the same or different settings.

The definition of a set depends on the scan source:

  • If you scan a document on the scanner glass, then a set consists of one page.
  • If you scan multiple pages using the ADF, then a set consists of all scanned pages until the ADF tray becomes empty.
  • If you scan one page using the ADF, then a set consists of one page.

For example:

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Advanced Options > Custom Job > On >

4 Load the next document faceup, short edge first into the ADF tray or facedown on the scanner glass, and then touch Scan from automatic feeder or Scan from flatbed.

5 If you have another document to scan, then repeat the previous step. Otherwise, touch Finish the job.

Placing information on copies

Placing a header or footer on pages

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Advanced Options > Header/Footer > select where you want to place the header or footer > select the type of header or footer you want

Copying 108 · > Copy It

Page 109 of the Lexmark MX710DHE user manual — Canceling a copy job while pages are being printed
Page 109 · click to enlarge
Page 109

4 Enter the required information depending on the header or footer you selected, and then touch Done.

, and then press .

Placing an overlay message on each page

An overlay message can be placed on each page. The message choices are Urgent, Confidential, Copy, Custom, and Draft.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Advanced Options > Overlay > select overlay message > Done > Copy It

Canceling a copy job

Canceling a copy job while the original document is in the ADF

When the ADF begins processing a document, touch Cancel Job on the printer control panel.

Canceling a copy job while copying pages using the scanner glass

From the home screen, touch Cancel Job.

Canceling appears on the display. When the job is canceled, the Copy screen appears.

Canceling a copy job while pages are being printed

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Copying 109 · 5 Touch

Page 110 of the Lexmark MX710DHE user manual — Collate
Page 110 · click to enlarge
Page 110

Understanding the copy options

Copy from

This option opens a screen where you can select the paper size of the original document.

  • Touch the paper size that matches the original document.
  • To copy an original document that contains mixed paper sizes with the same width, touch Mixed Sizes .
  • To set the printer to automatically detect the size of the original document, touch Auto Size Sense .

Copy to

This option opens a screen where you can enter the paper size and type on which your copies will be printed.

  • Touch the paper size and type that matches the paper loaded.
  • If the settings for “Copy from” and “Copy to” are different, then the printer automatically adjusts the Scale setting to accommodate the difference.
  • If the paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder , and manually load the paper in the multipurpose feeder.
  • When “Copy to” is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper size is not in one of the trays, then Paper size not found appears and prompts to load a paper in a tray or multipurpose feeder.

Scale

This option lets you scale the document from 25% to 400% of the original document size. You can also set automatic scaling.

  • When copying to a different paper size, such as from legal ‑ size to letter ‑ size paper, set the “Copy from” and “Copy to” paper sizes automatically to scale the scan image to fit the size of the paper onto which you are copying.
  • To decrease or increase the value by 1%, touch

on the printer control panel. To make a continuous decrease or increase in value, hold the button for two seconds or more.

Darkness

This option lets you adjust how light or dark the copies are in relation to the original document.

Sides (Duplex)

This option lets you make one- or two-sided copies from one- or two-sided original documents.

Collate

This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document.

Copying 110 · or

Page 111 of the Lexmark MX710DHE user manual — Using the advanced options
Page 111 · click to enlarge
Page 111

Copies

This option lets you set the number of copies to be printed.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Save As Shortcut

This option lets you save the current settings by assigning a shortcut name.

Using the advanced options

Select from the following settings:

  • Advanced Duplex —This specifies the document orientation, whether documents are one-sided or two-sided, and how documents are bound.
  • Advanced Imaging —This changes or adjusts Auto Center, Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the document.
  • Create Booklet —This creates a booklet. You can choose between one ‑ sided and two ‑ sided.
  • Note: This option appears only when a printer hard disk is installed.
  • Cover Page Setup —This sets up the cover page of copies and booklets.
  • Custom Job —This combines multiple scanning jobs into a single job.
  • Edge Erase —This removes smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving nothing on that portion of the scan.

Copying 111

Page 112 of the Lexmark MX710DHE user manual — Copies
Page 112 · click to enlarge
Page 112
  • Header/Footer —This inserts date or time, page number, Bates number, or custom text, and then prints them in the specified header or footer location.
  • Margin Shift —This increases or reduces the size of the margin of a page by shifting the scanned image. Touch
  • to set the margin you want. If the additional margin is too large, then the copy will be cropped.
  • Overlay —This creates a watermark (or message) that overlays the content of your copy. You can choose from Urgent, Confidential, Copy, and Draft, or you can enter a custom message in the ”Enter custom text” field. The word you pick will appear, faintly, in large print across each page.
  • Paper Saver —This prints two or more pages of an original document on the same page. Paper Saver is also called N-up printing where N stands for the number of pages. For example, 2-up would print two pages of your document on a single page, and 4-up would print four pages of your document on a single page.
  • Separator Sheets —This places a blank sheet of paper between copies, pages, or print jobs. The separator sheets can be drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on.
  • Multifeed Sensor —This detects when the ADF picks more than one sheet of paper at a time, and then displays an error message.

Copying 112 · or

Page 113 of the Lexmark MX710DHE user manual — Configuring e ‑ mail settings
Page 113 · click to enlarge
Page 113

E-mailing

Automatic document feeder (ADF) Scanner glass

ABC

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Setting up the printer to e-mail

Setting up the e-mail function

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > E-mail/FTP Settings > E-mail Settings.

3 Enter the appropriate information, and then click Submit.

Configuring e ‑ mail settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > E-mail/FTP Settings > E-mail Settings.

3 Enter the appropriate information, and then click Submit.

E-mailing 113

Page 114 of the Lexmark MX710DHE user manual — Creating an e-mail shortcut using the printer control panel
Page 114 · click to enlarge
Page 114

Creating an e-mail shortcut

Creating an e-mail shortcut using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings.

3 From the Other Settings column, click Manage Shortcuts > E-mail Shortcut Setup.

4 Type a unique name for the e‑mail recipient, and then type the e‑mail address. If you are entering multiple addresses, then separate each address with a comma.

5 Click Add.

Creating an e-mail shortcut using the printer control panel

1 From the home screen, navigate to:

E-mail > Recipient > type an e‑mail address

To create a group of recipients, touch Next address, and then type the next recipient’s e-mail address.

2 Touch Subject, then type the e‑mail subject, and then touch Done.

3 Touch Message, then type your message, and then touch Done.

4 Adjust the e‑mail settings.

6 Type a unique name for the shortcut, and then touch Done.

7 Verify that the shortcut name is correct, and then touch OK.

If the shortcut name is incorrect, then touch Cancel, and then reenter the information.

  • The shortcut name appears in the E-mail Shortcuts icon on the printer home screen.
  • You can use the shortcut when e ‑ mailing another document using the same settings.

E-mailing 114 · 5 Touch

Page 115 of the Lexmark MX710DHE user manual — Sending an e ‑ mail using a shortcut number
Page 115 · click to enlarge
Page 115

E-mailing a document

You can use the printer to e‑mail scanned documents to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For more information, see the "Activating the home screen applications" section.

Sending an e-mail using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

4 Type the e‑mail address, or press # using the keypad, and then enter the shortcut number.

  • To enter additional recipients, touch Next address , and then enter the address or shortcut number you want to add.
  • You can also enter an e ‑ mail address using the address book.

5 Touch Done > Send It.

Sending an e ‑ mail using a shortcut number

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 Press #, then enter the shortcut number using the keypad, and then touch

4 Touch Send It.

E-mailing 115 · E-mail > Recipient(s)

Page 116 of the Lexmark MX710DHE user manual — Changing the output file type
Page 116 · click to enlarge
Page 116

Sending an e ‑ mail using the address book

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

E-mail > Recipient(s) >

> type the name of the recipient > Search

4 Touch the name of the recipient.

5 Touch Done.

Customizing e-mail settings

Adding e-mail subject and message information

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

E-mail > Recipient(s) > type the e‑mail address > Done

4 Touch Subject, then type the e‑mail subject, and then touch Done.

5 Touch Message, then type your message, and then touch Done.

Changing the output file type

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

E-mailing 116

Page 117 of the Lexmark MX710DHE user manual — Save As Shortcut
Page 117 · click to enlarge
Page 117

3 From the home screen, navigate to:

E-mail > Recipient(s) > type the e‑mail address > Done > Send as

  • 4 Touch the button that represents the file type you want to send.
  • PDF —Create a single file with multiple pages.
  • Secure PDF —Create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
  • JPEG —Create and attach a separate file for each page of your original document, viewable by most Web browsers and graphics programs.
  • XPS —Create a single XML Paper Specification (XPS) file with multiple pages, viewable using an Internet Explorer ‑ hosted viewer and the .NET Framework, or by downloading a third ‑ party standalone viewer.

> Send It.

Canceling an e-mail

  • When using the ADF, touch Cancel Job while Scanning appears.
  • When using the scanner glass, touch Cancel Job while Scanning appears, or while Scan the Next Page / Finish the Job appears.

Understanding the e-mail options

Recipient(s)

This option lets you enter the recipient of your e-mail. You may enter multiple e‑mail addresses.

Subject

This option lets you type a subject line for your e-mail.

Message

This option lets you type a message that will be sent with your scanned attachment.

File Name

This option lets you customize the attachment file name.

Save As Shortcut

This option lets you save the current settings as a shortcut by assigning a shortcut name.

E-mailing 117 · 5 Touch

Page 118 of the Lexmark MX710DHE user manual — Send As
Page 118 · click to enlarge
Page 118

Original Size

This option lets you set the paper size of the documents you are going to e‑mail. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).

Darkness

This option lets you adjust how light or dark your scanned documents are in relation to the original document.

Resolution

This option lets you adjust the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Send As

This option lets you set the output type for the scan image.

Select one of the following:

  • PDF —Use this to create a single file with multiple pages.
  • Note: PDF is the factory default setting.
  • Secure PDF —Use this to create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Use this to create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
  • JPEG —Use this to create and attach a separate file for each page of your original document.
  • XPS —Use this to create a single XPS file with multiple pages.

E-mailing 118

Page 119 of the Lexmark MX710DHE user manual — Using the advanced options
Page 119 · click to enlarge
Page 119

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on only one side or on both sides of the paper. This also identifies what needs to be scanned for inclusion in the e-mail.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears.

Using the advanced options

Select from the following settings:

  • Advanced Imaging —This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e ‑ mail the document.
  • Custom Job —This combines multiple scanning jobs into a single job.
  • Edge Erase —This removes smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving nothing on that portion of the scan.
  • Transmission Log —This prints the transmission log or transmission error log.
  • Multifeed Sensor —This detects when the ADF picks more than one sheet of paper at a time, and then displays an error message.

E-mailing 119

Page 120 of the Lexmark MX710DHE user manual — Initial fax setup
Page 120 · click to enlarge
Page 120

Faxing

Automatic document feeder (ADF) Scanner glass

ABC

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Setting up the printer to fax

The following connection methods may not be applicable in all countries or regions.

Lexmark MX710DHE — Setting up the printer to fax diagram (page 120)
Fig. 110 · Setting up the printer to fax

Initial fax setup

Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual). For more information, see “Regulatory notices for telecommunication terminal equipment” on

Faxing 120

Page 121 of the Lexmark MX710DHE user manual — Scenario 1: Standard telephone line
Page 121 · click to enlarge
Page 121

Choosing a fax connection

Scenario 1: Standard telephone line

Setup 1: Printer is connected to a dedicated fax line

Lexmark MX710DHE — Scenario 1: Standard telephone line diagram (page 121)
Fig. 111 · Scenario 1: Standard telephone line
Lexmark MX710DHE — Scenario 1: Standard telephone line diagram (page 121)
Fig. 112 · Scenario 1: Standard telephone line

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

Faxing 121

Page 122 of the Lexmark MX710DHE user manual — Setup 2: Printer is sharing the line with an answering machine
Page 122 · click to enlarge
Page 122
  • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).
  • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of rings that you want.

Setup 2: Printer is sharing the line with an answering machine

Connected to the same telephone wall jack

Lexmark MX710DHE — Setup 2: Printer is sharing the line with an answering machine diagram (page 122)
Fig. 113 · Setup 2: Printer is sharing the line with an answeri…

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

3 Connect the answering machine to the port of the printer.

Faxing 122

Page 123 of the Lexmark MX710DHE user manual — Choosing a fax connection
Page 123 · click to enlarge
Page 123

Connected to different wall jacks

Lexmark MX710DHE — Choosing a fax connection diagram (page 123)
Fig. 114 · Choosing a fax connection

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

  • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On).
  • Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
  • If you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes automatically.

Faxing 123

Page 124 of the Lexmark MX710DHE user manual — Choosing a fax connection
Page 124 · click to enlarge
Page 124
Setup 3Printer is sharing the line with a telephone subscribed to voice mail service
Lexmark MX710DHE — Choosing a fax connection diagram (page 124)
Fig. 115 · Choosing a fax connection

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

3 Connect the telephone to the port of the printer.

  • This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes automatically.
  • If you have only one telephone number on your line, then you need to set the printer to receive faxes manually (Auto Answer Off).

When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the telephone to receive the fax.

Faxing 124

Page 125 of the Lexmark MX710DHE user manual — Scenario 2: Digital Subscriber Line (DSL)
Page 125 · click to enlarge
Page 125
  • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax.

Scenario 2: Digital Subscriber Line (DSL)

Lexmark MX710DHE — Scenario 2: Digital Subscriber Line (DSL) diagram (page 125)
Fig. 116 · Scenario 2: Digital Subscriber Line (DSL)

A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.

To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer.

To install a filter for the printer:

1 Connect the line port of the DSL filter to the wall jack.

2 Connect one end of the telephone cable that came with your printer to the port of the printer. Connect the other end to the phone port on the DSL filter.

Faxing 125

Page 126 of the Lexmark MX710DHE user manual — Scenario 3: VoIP telephone service
Page 126 · click to enlarge
Page 126

3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter.

4 To connect a telephone to the printer, remove any installed adapter plug from the port of the printer, and then connect the telephone to the port.

Scenario 3: VoIP telephone service

Lexmark MX710DHE — Scenario 3: VoIP telephone service diagram (page 126)
Fig. 117 · Scenario 3: VoIP telephone service

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.

3 Connect the telephone to the port of the printer.

Faxing 126

Page 127 of the Lexmark MX710DHE user manual — Scenario 4: Digital telephone service through a cable provider
Page 127 · click to enlarge
Page 127
  • To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two phone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the port labeled Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

Lexmark MX710DHE — Scenario 4: Digital telephone service through a cable provider diagram (page 127)
Fig. 118 · Scenario 4: Digital telephone service through a cabl…

Faxing 127

Page 128 of the Lexmark MX710DHE user manual — Scenario 4: Digital telephone service through a cable provider
Page 128 · click to enlarge
Page 128

1 Connect one end of the telephone cable that came with your printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

3 Connect your analog telephone phone to the port of the printer.

  • To make sure that the telephone port on the cable modem is active, plug an analog telephone into the telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two telephone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second telephone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.
  • Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.

Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility

Lexmark MX710DHE — Scenario 4: Digital telephone service through a cable provider diagram (page 128)
Fig. 119 · Scenario 4: Digital telephone service through a cabl…

Faxing 128

Page 129 of the Lexmark MX710DHE user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 129 · click to enlarge
Page 129

1 Connect one end of the telephone cable that came with your printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

3 Connect your analog telephone to the port of the printer.

Scenario 5: Countries or regions with different telephone wall jacks and plugs

Some countries or regions may have different types of telephone wall jack connectors than those that came with the printer. The standard wall jack adopted by most countries or regions is RJ-11. Your printer comes with the RJ-11 jack and a telephone cable with the RJ-11 plug.

If the wall jack or equipment in your facility is not compatible with this type of connection, then you need to use a telephone adapter. An adapter for your country or region may not come with your printer, and you may need to purchase it separately.

There may be an adapter plug installed in the port of the printer. If you are using a telephone adapter or a facility that has a cascaded or serial wiring scheme, then do not remove the adapter plug from the port of the printer.

Lexmark MX710DHE — Scenario 5: Countries or regions with different telephone wall jacks and plugs diagram (page 129)
Fig. 120 · Scenario 5: Countries or regions with different tele…

Faxing 129

Page 130 of the Lexmark MX710DHE user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 130 · click to enlarge
Page 130

Connecting the printer to a non‑RJ‑11 wall jack

Lexmark MX710DHE — Scenario 5: Countries or regions with different telephone wall jacks and plugs diagram (page 130)
Fig. 121 · Scenario 5: Countries or regions with different tele…

1 Connect one end of the telephone cable that came with printer to the port of the printer.

2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.

3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.

  • The port of the printer may have an adapter plug for use with the adapter. Do not remove the plug from the port of the printer.
  • In some countries or regions, the printer may not come with a telephone adapter or an adapter plug.

Faxing 130

Page 131 of the Lexmark MX710DHE user manual — N F N
Page 131 · click to enlarge
Page 131

Connecting the printer to a wall jack in Germany

The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.

N F N

Faxing 131

Page 132 of the Lexmark MX710DHE user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 132 · click to enlarge
Page 132

Connect the printer to any of the N ports.

Lexmark MX710DHE — Scenario 5: Countries or regions with different telephone wall jacks and plugs diagram (page 132)
Fig. 122 · Scenario 5: Countries or regions with different tele…

1 Connect one end of the telephone cable that came the printer to the port of the printer.

2 Connect the other end of the telephone cable to the RJ‑11 adapter, and then connect the adapter to an N port.

3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown.

Faxing 132

Page 133 of the Lexmark MX710DHE user manual — Setting the outgoing fax name and number
Page 133 · click to enlarge
Page 133

Connecting to a distinctive ring service

A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, then follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the printer LINE port .

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Lexmark MX710DHE — Connecting to a distinctive ring service diagram (page 133)
Fig. 123 · Connecting to a distinctive ring service
Lexmark MX710DHE — Connecting to a distinctive ring service diagram (page 133)
Fig. 124 · Connecting to a distinctive ring service

3 Change the distinctive rings setting to match the setting you want for the printer to answer.

> Settings > Fax Settings > Analog Fax Setup > Answer On b Select the pattern setting you want to change, and then touch Submit.

Setting the outgoing fax name and number

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup.

3 In the Fax Name field, type the name to be printed on all outgoing faxes.

4 In the Fax Number field, enter the printer fax number.

5 Click Submit.

Faxing 133

Page 134 of the Lexmark MX710DHE user manual — Sending a fax using the printer control panel
Page 134 · click to enlarge
Page 134

Setting the date and time

You can set the date and time so that they are printed on every fax you send.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Security > Set Date and Time.

3 In the Manually Set Date & Time field, enter the current date and time.

4 Click Submit.

Configuring the printer to observe daylight saving time

The printer can be set to automatically adjust for daylight saving time:

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Security > Set Date and Time.

3 Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom Time Zone Setup section.

4 Click Submit.

Sending a fax

You can use the printer to send a fax to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For more information, see the "Activating the home screen applications" section of the User’s Guide.

Sending a fax using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Faxing 134

Page 135 of the Lexmark MX710DHE user manual — Sending a fax using a shortcut number
Page 135 · click to enlarge
Page 135
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Fax.

4 Enter the fax number or a shortcut.

5 Touch Fax It.

Sending a fax using the computer

The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.

1 With a document open, click File > Print.

2 Select the printer, and then click Properties, Preferences, Options, or Setup.

3 Navigate to:

Fax tab > Enable fax

4 Enter the recipient fax number or numbers in the “Fax number(s)” field.

5 If necessary, enter a prefix in the “Dialing prefix” field.

6 Select the appropriate paper size and page orientation.

7 If you want to include a cover page with the fax, then select Include cover page with fax, and then enter the appropriate information.

8 Click OK.

  • The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD.
  • The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used.
  • If the Always display settings prior to faxing check box is selected, then you are prompted to verify the recipient information before the fax is sent. If this check box is cleared, then the queued document is sent automatically as a fax when you click OK on the Fax tab.

Sending a fax using a shortcut number

Fax shortcuts are like the speed dial numbers on a telephone or a fax machine. A shortcut number (1–999) can contain a single recipient or multiple recipients.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Faxing 135

Page 136 of the Lexmark MX710DHE user manual — Sending a fax at a scheduled time
Page 136 · click to enlarge
Page 136
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press #, and then enter the shortcut number using the keypad.

4 Touch Fax It.

Sending a fax using the address book

The address book lets you search for bookmarks and network directory servers. For more information on enabling the address book feature, contact your system support person.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

> type the name of the recipient > Search

4 Touch the name of the recipient, and then touch Fax It.

Sending a fax at a scheduled time

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Fax > enter the fax number > Options > Delayed Send

Faxing 136 · Fax >

Page 137 of the Lexmark MX710DHE user manual — Creating a fax destination shortcut using the printer control panel
Page 137 · click to enlarge
Page 137

4 Specify the time the fax will be transmitted, and then touch

5 Touch Fax It.

Creating shortcuts

Creating a fax destination shortcut using the Embedded Web Server

Assign a shortcut number to a single fax number or a group of fax numbers.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Manage Shortcuts > Fax Shortcut Setup.

3 Type a name for the shortcut, and then enter the fax number.

  • To create a multiple ‑ number shortcut, enter the fax numbers for the group.
  • Separate each fax number in the group with a semicolon (;).

4 Assign a shortcut number.

5 Click Add.

Creating a fax destination shortcut using the printer control panel

1 From the home screen, touch Fax, and then enter the fax number.

3 Type a unique name for the shortcut, and then touch Done.

4 Verify that the shortcut name and number are correct, and then touch OK.

Faxing 137 · 2 Touch

Page 138 of the Lexmark MX710DHE user manual — Viewing a fax log
Page 138 · click to enlarge
Page 138

Customizing fax settings

Changing the fax resolution

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Fax > enter the fax number > Options

4 From the Resolution area, touch the arrows to select the resolution you want.

5 Touch Fax It.

Making a fax lighter or darker

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Fax > enter the fax number > Options

4 Adjust the fax darkness, and then touch Fax It.

Viewing a fax log

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Reports.

3 Click Fax Job Log or Fax Call Log.

Faxing 138

Page 139 of the Lexmark MX710DHE user manual — Holding faxes
Page 139 · click to enlarge
Page 139

Blocking junk faxes

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.

  • This option blocks all incoming faxes that have a private caller ID or have no fax name.
  • In the Banned Fax List field, enter the phone numbers or type the fax names of specific fax callers you want to block.

Canceling an outgoing fax

Canceling a fax while the original documents are still scanning

  • When using the ADF, touch Cancel Job on the printer control panel while Scanning appears.
  • When using the scanner glass, touch Cancel Job on the printer control panel while Scanning appears or while Scan the Next Page and Finish the Job appear.

Canceling a fax after the original documents have been scanned to memory

1 On the home screen, touch Cancel Jobs.

The Cancel Jobs screen appears.

2 Touch the job or jobs you want to cancel.

Only three jobs appear on the screen; touch the down arrow until the job you want appears, and then touch the job you want to cancel.

3 Touch Delete Selected Jobs.

The Deleting Selected Jobs screen appears, the selected jobs are deleted, and then the home screen appears.

Holding and forwarding faxes

Holding faxes

This option lets you hold received faxes from printing until they are released. Held faxes can be released manually or at a scheduled day or time.

1 Open a Web browser, and then type the printer IP address in the address field.

Faxing 139

Page 140 of the Lexmark MX710DHE user manual — Content
Page 140 · click to enlarge
Page 140
  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup > Holding Faxes.

  • 3 From the Held Fax Mode menu, select one of the following:
  • Off
  • Always On
  • Manual
  • Scheduled

4 If you selected Scheduled, then continue with the following steps: a Click Fax Holding Schedule. b From the Action menu, select Hold faxes.

c From the Time menu, select the time you want the held faxes released. d From the Day(s) menu, select the day you want the held faxes released.

5 Click Add.

Forwarding a fax

This option lets you print and forward received faxes to a fax number, e‑mail address, FTP site, or LDSS.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings.

3 From the Fax Forwarding menu, select Print, Print and Forward, or Forward.

4 From the “Forward to” menu, select Fax, E‑mail, FTP, LDSS, or eSF.

5 In the “Forward to Shortcut” field, enter the shortcut number where you want the fax forwarded.

6 Click Submit.

Understanding the fax options

Content

This option lets you specify the content type and source of the original document.

Faxing 140

Page 141 of the Lexmark MX710DHE user manual — Page Setup
Page 141 · click to enlarge
Page 141

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Resolution

This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Select one of the following:

  • Standard —Use this when faxing most documents.
  • Fine 200 dpi —Use this when faxing documents with small prints.
  • Super fine 300 dpi —Use this when faxing documents with fine details.
  • Ultra fine 600 dpi —Use this when faxing documents with pictures or photos.

Darkness

This option lets you adjust how light or dark the faxes are in relation to the original document.

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on one side or on both sides of the page (duplex). This also identifies what needs to be scanned for inclusion in the fax.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Faxing 141

Page 142 of the Lexmark MX710DHE user manual — Using the advanced options
Page 142 · click to enlarge
Page 142

Scan Preview

This option lets you view the first page of the image before it is included in the fax. When the first page is scanned, the scanning is paused and a preview image appears.

Delayed Send

This option lets you send a fax at a later time or date.

Using the advanced options

Select from the following settings:

  • Advanced Imaging —This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the document.
  • Custom Job —This combines multiple scanning jobs into a single job.
  • Edge Erase —This removes smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the area selected, leaving nothing on that portion of the scan.
  • Transmission Log —This prints the transmission log or transmission error log.
  • Multifeed Sensor —This detects when the ADF picks more than one sheet of paper at a time, and then shows an error message.

Faxing 142

Page 143 of the Lexmark MX710DHE user manual — Creating an FTP shortcut using the Embedded Web Server
Page 143 · click to enlarge
Page 143

Scanning

Using Scan to Network

Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server. For more information, see “Setting up Scan to Network” on page 26.

Scanning to an FTP address

Automatic document feeder (ADF) Scanner glass

ABC

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.

When an FTP destination has been configured by your system support person, the name of the destination becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination could also be another PostScript printer; for example, a color document can be scanned and then sent to a color printer.

Creating shortcuts

Instead of entering the entire FTP site address on the printer control panel each time you want to send a document to an FTP server, you can create a permanent FTP destination and assign a shortcut number. There are two methods for creating shortcut numbers: using the Embedded Web Server and using the printer control panel.

Creating an FTP shortcut using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Scanning 143

Page 144 of the Lexmark MX710DHE user manual — Scanning to an FTP address using the printer control panel
Page 144 · click to enlarge
Page 144
  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Navigate to:

Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup

3 Enter the appropriate information.

4 Enter a shortcut number.

5 Click Add.

Creating an FTP shortcut using the printer control panel

1 From the home screen, navigate to:

FTP > FTP > type the FTP address >

> type a name for the shortcut > Done

2 Verify that the shortcut name and number are correct, and then touch OK.

  • If the name or number is incorrect, then touch Cancel , and then reenter the information.
  • If you enter a number that is already in use, then you are prompted to select another number.

Scanning to an FTP address

You can use the printer to send scanned documents to an FTP address in a number of ways. You can type the FTP address, use a shortcut number, or use the address book. You can also use the Multi Send, Scan to Network, or MyShortcut application from the printer home screen. For more information, see the "Activating the home screen applications" section of the User’s Guide.

Scanning to an FTP address using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, navigate to:

FTP > FTP > type the FTP address > Done > Send It

Scanning 144

Page 145 of the Lexmark MX710DHE user manual — FTP > FTP >
Page 145 · click to enlarge
Page 145

Scanning to an FTP address using a shortcut number

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press # on the keypad, and then enter the FTP shortcut number.

> Send It.

Scanning an FTP using the address book

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

FTP > FTP >

> type the name of the recipient > Search

4 Touch the name of the recipient.

> Send It.

Scanning 145 · 4 Touch · 5 Touch

Page 146 of the Lexmark MX710DHE user manual — Scanning to a computer using the Embedded Web Server
Page 146 · click to enlarge
Page 146

Scanning to a computer or flash drive

Automatic Document Feeder (ADF) Scanner glass

ABC

Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or

photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a computer or a flash drive. The computer does not have to be directly connected to the printer for you to receive images using Scan to Computer. You can scan the document back to the computer over the network by creating a scan profile on the computer and then downloading the profile to the printer.

Scanning to a computer using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Scan Profile > Create Scan Profile.

3 Select your scan settings, and then click Next.

4 Select a location on your computer where you want to save the scan image.

5 Type a scan name, and then a user name.

6 Click Submit.

7 Review the instructions on the Scan Profile screen. a Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Scanning 146

Page 147 of the Lexmark MX710DHE user manual — In Windows 7 or earlier
Page 147 · click to enlarge
Page 147
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly. b If you are loading a document into the ADF tray, then adjust the paper guides.

c Do either of the following:

  • Press # , and then enter the shortcut number using the keypad.
  • From the home screen, navigate to: Held Jobs > Profiles > select your shortcut on the list

8 View the file from the computer.

Setting up Scan to Computer

  • This feature is supported only in Windows Vista or later.
  • Make sure that your computer and printer are connected to the same network.

1 Open the printers folder.

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Depending on your operating system, click Add devices and printers, Add a device, or Add a printer.

3 Select your printer from the list.

4 Click Next > Close.

  • 5 Depending on your device, do either of the following:.
  • Press and hold the printer you want to configure.
  • Right ‑ click the printer you want to configure.

6 From the menu that appears, select Scan Properties or Properties, and then change the settings as necessary.

Scanning 147 · a Click

Page 148 of the Lexmark MX710DHE user manual — Save As Shortcut
Page 148 · click to enlarge
Page 148
  • 7 From the printer control panel, touch Scan to Computer and then select from the following options:
  • Scan —Scan and save the document directly to a selected location on the computer.
  • Scan for Print —Scan and automatically print the document.
  • Scan for E ‑ mail —Attach a scanned document to an e ‑ mail.
  • Scan for Fax —Attach a scanned document to be sent through fax.

8 Touch Send It.

Remote scan in progress appears on the printer display. The scanned image opens automatically on the computer screen.

Scanning to a flash drive

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 Insert the flash drive into the USB port on the front of the printer.

4 Select the destination folder, and then touch Scan to USB drive.

5 Adjust the scan settings, and then touch Scan It.

Understanding the scan options

FTP

This option lets you enter the IP address for the FTP destination.

File Name

This option lets you type a file name for the scan image.

Save As Shortcut

This option lets you save the current settings as a shortcut by assigning a shortcut name.

Scanning 148

Page 149 of the Lexmark MX710DHE user manual — Content
Page 149 · click to enlarge
Page 149

Original Size

This option lets you set the paper size of the documents you are going to scan. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).

Send As

This option lets you set the output type for the scan image.

Select one of the following:

  • PDF —Use to create a single file with multiple pages.
  • Secure PDF —Use to create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Use to create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
  • JPEG —Use to create and attach a separate file for each page of the original document.
  • XPS —Use to create a single XPS file with multiple pages.

Resolution

This option lets you adjust the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Darkness

This option lets you adjust how light or dark the scanned documents are in relation to the original document.

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on only one side or on both sides of the paper.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Scanning 149

Page 150 of the Lexmark MX710DHE user manual — Using the advanced options
Page 150 · click to enlarge
Page 150

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Scan Preview

This option lets you view the first page of the image before it is included in the file. When the first page is scanned, the scanning is paused and a preview image appears.

Using the advanced options

Select from the following settings:

  • Advanced Imaging —This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you scan the document.
  • Custom Job —This combines multiple scanning jobs into a single job.
  • Edge Erase —This removes smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the area selected, leaving nothing on that portion of the scan.
  • Transmission Log —This prints the transmission log or transmission error log.
  • Multifeed Sensor —This detects when the ADF picks more than one sheet of paper at a time, and then shows an error message.

Scanning 150

Page 151 of the Lexmark MX710DHE user manual — Understanding the printer menus
Page 151 · click to enlarge
Page 151

Understanding the printer menus 151

Understanding the printer menus

Menus list

Paper Menu Reports Network/Ports Security Settings

Default Source Paper Size/Type

Menu Settings Page Device Statistics

Edit Security Setups Miscellaneous Security Settings

General Settings Copy Settings

Network [x] Setup Page

E‑mail Settings

Parallel [x] Serial [x]

Set Date and Time

Custom Names Custom Scan Sizes

Copy Shortcuts E-mail Shortcuts

Help Manage Shortcuts Option Card Menu2

A list of installed DLEs (Download Emulators) appears.

Print Defects Guide Information Guide

1 Depending on the printer setup, this menu appears as Standard Network or Network [x].

2 This menu appears only when one or more DLEs are installed.

Show 41 more labels / short text on this page
Active NIC · Standard Network1 · Configure MP · Network Setup Page · Standard USB · Fax Settings · Substitute Size · Confidential Print · Disk Wiping · Paper Texture · FTP Settings · Shortcut List · Security Audit Log · Paper Weight · SMTP Setup · Flash Drive Menu · Paper Loading · Fax Job Log · Print Settings · Fax Call Log · Custom Types · Custom Bin Names · Fax Shortcuts · FTP Shortcuts · Universal Setup · Bin Setup · Profiles List · Print Fonts · Print Directory · Asset Report · Print All Guides · Fax Shortcuts · Copy Guide · E-mail Shortcuts · E-mail Guide · FTP Shortcuts · Fax Guide · Copy Shortcuts · FTP Guide · Profile Shortcuts · Supplies Guide
Page 152 of the Lexmark MX710DHE user manual — Configure MP menu
Page 152 · click to enlarge
Page 152

Understanding the printer menus 152

Paper menu

Default Source menu

Set a default paper source for all print jobs.

Tray [x] Multipurpose Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.
Show 5 more labels / short text on this page
Use To · Default Source · Use To · Configure MP · Cassette Manual First
Page 153 of the Lexmark MX710DHE user manual — Paper Size/Type menu
Page 153 · click to enlarge
Page 153

Understanding the printer menus 153

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. The multipurpose feeder may also be linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and in the multipurpose feeder.

Specify the type of paper loaded in each tray.

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Use To · Tray [x] Size · Tray [x] Type

Page 154 of the Lexmark MX710DHE user manual — Paper Size/Type menu
Page 154 · click to enlarge
Page 154

Understanding the printer menus 154

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. The paper size value must be set.

Specify the paper type loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure to “Cassette” for MP Feeder Type to appear as a menu.

Use To · MP Feeder Size · MP Feeder Type

Page 155 of the Lexmark MX710DHE user manual — Paper Size/Type menu
Page 155 · click to enlarge
Page 155

Understanding the printer menus 155

Specify the size of the paper being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Show 5 more labels / short text on this page
Use To · Manual Paper Size · Manual Paper Type · Manual Envelope Size · Manual Envelope Type
Page 156 of the Lexmark MX710DHE user manual — Paper Texture menu
Page 156 · click to enlarge
Page 156

Understanding the printer menus 156

Default ADF Media Type

Specify the media type being loaded in the ADF.

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom [x]

Substitute Size menu

Substitute a specified paper size if the requested paper size is not available.

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without Change Paper appearing.

Paper Texture menu

Specify the relative texture of the plain paper loaded in a specific tray.

Specify the relative texture of the card stock loaded in a specific tray.

  • Normal is the factory default setting.
  • These options appear only if card stock is supported.
Show 8 more labels / short text on this page
Use To · Use To · Substitute Size · Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough
Page 157 of the Lexmark MX710DHE user manual — Substitute Size menu
Page 157 · click to enlarge
Page 157

Understanding the printer menus 157

Specify the relative texture of the transparencies loaded in a specific tray.

Specify the relative texture of the recycled paper loaded in a specific tray.

Specify the relative texture of the labels loaded in a specific tray.

Specify the relative texture of the vinyl labels loaded in a specific tray.

Specify the relative texture of the bond paper loaded in a specific tray.

Specify the relative texture of the envelopes loaded in a specific tray.

Specify the relative texture of the rough envelopes loaded in a specific tray.

Specify the relative texture of the letterhead loaded in a specific tray.

Specify the relative texture of the preprinted paper loaded in a specific tray.

Specify the relative texture of the colored paper loaded in a specific tray.

Specify the relative texture of the light paper loaded in a specific tray.

Show 23 more labels / short text on this page
Use To · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Vinyl Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough
Page 158 of the Lexmark MX710DHE user manual — Paper Weight menu
Page 158 · click to enlarge
Page 158

Understanding the printer menus 158

Specify the relative texture of the heavy paper loaded in a specific tray.

Specify the relative texture of the rough or cotton paper loaded in a specific tray.

Specify the relative texture of the custom paper loaded in a specific tray.

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Specify the relative weight of the labels loaded.

Specify the relative weight of the vinyl labels loaded.

Specify the relative weight of the bond paper loaded.

Show 22 more labels / short text on this page
Use To · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough · Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Vinyl Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy
Page 159 of the Lexmark MX710DHE user manual — Paper Weight menu
Page 159 · click to enlarge
Page 159

Understanding the printer menus 159

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Specify the relative weight of the colored paper loaded.

Specify that the weight of the paper loaded is light.

Specify that the weight of the paper loaded is heavy.

Specify the relative weight of the cotton or rough paper loaded.

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.
Show 19 more labels / short text on this page
Use To · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Light Normal Heavy · Custom [x] Weight · Light Normal Heavy
Page 160 of the Lexmark MX710DHE user manual — Paper Loading menu
Page 160 · click to enlarge
Page 160

Understanding the printer menus 160

Paper Loading menu

Determine and set two-sided printing for all print jobs with Card Stock as the paper type.

Determine and set two-sided printing for all print jobs with Recycled as the paper type.

Determine and set two-sided printing for all print jobs with Labels as the paper type.

Determine and set two-sided printing for all print jobs with Vinyl Labels as the paper type.

Determine and set two-sided printing for all print jobs with Bond as the paper type.

Determine and set two-sided printing for all print jobs with Letterhead as the paper type.

Determine and set two-sided printing for all print jobs with Preprinted as the paper type.

Determine and set two-sided printing for all print jobs with Colored as the paper type.

Determine and set two-sided printing for all print jobs with Light as the paper type.

Determine and set two-sided printing for all print jobs with Heavy as the paper type.

Determine and set two-sided printing for all print jobs with Rough or Cotton as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.
Show 23 more labels / short text on this page
Use To · Card Stock Loading · Duplex Off · Recycled Loading · Duplex Off · Labels Loading · Duplex Off · Vinyl Labels Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off · Heavy Loading · Duplex Off · Rough/Cotton Loading · Duplex Off
Page 161 of the Lexmark MX710DHE user manual — Custom Names menu
Page 161 · click to enlarge
Page 161

Understanding the printer menus 161

Determine and set two-sided printing for all print jobs with Custom [x] as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.

Custom Types menu

Associate a paper or specialty media type with a factory default custom type name or a user‑defined custom name created from the Embedded Web Server or from MarkVisionTM Professional.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Specify a paper type when Recycled is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Custom Names menu

Custom Name [x] Specify a custom name for a paper type. This name replaces Custom Type [x] in the printer menus.

Show 7 more labels / short text on this page
Use To · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled · Use To
Page 162 of the Lexmark MX710DHE user manual — Universal Setup menu
Page 162 · click to enlarge
Page 162

Understanding the printer menus 162

Custom Scan Sizes menu

Custom Scan Size [x]

Specify a custom scan size name, scan sizes, and options. The custom scan size name replaces Custom Scan Size [x] in the printer menus.

Scan Size Name Media Type

  • ADF Media Type is the factory default setting for custom scan sizes 3, 4, 5, and 6.
  • Rough/Cotton is the factory default setting for custom scan sizes 1 and 2.
  • 8.5 inches is the U.S. factory default setting for Width. 210 millimeters is the international factory default setting for Width.
  • 14 inches is the U.S. factory default setting for Height. 297 millimeters is the international factory default setting for Height.
  • Portrait is the factory default setting for Orientation.
  • Off is the factory default setting for “2 scans per side.”

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Enveloope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x] Width

1–8.5 inches (25–216 mm) Height

1–25 inches (25–635.0 mm) Orientation

Portrait Landscape 2 scans per side Off On

Universal Setup menu

Identify the units of measure.

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.
Show 5 more labels / short text on this page
Use To · ADF Media Type · Use To · Units of Measure · Inches Millimeters
Page 163 of the Lexmark MX710DHE user manual — Reports menu
Page 163 · click to enlarge
Page 163

Understanding the printer menus 163

Set the portrait width.

3–8.5 inches 76–216 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. You can increase the width in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. You can increase the width in 1 ‑ mm increments.

Set the portrait height.

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. You can increase the height in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. You can increase the height in 1 ‑ mm increments.

Specify the feed direction if the paper can be loaded in either direction.

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Reports Menu

Reports menu

Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarm settings, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.

Device Statistics Print a report containing printer statistics such as supply information and number of printed pages.

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

Network [x] Setup Page Print a report containing information about the network settings of the printer, such as the TCP/IP address information.

Show 5 more labels / short text on this page
Use To · Portrait Width · Portrait Height · Feed Direction · Use To
Page 164 of the Lexmark MX710DHE user manual — Active NIC menu
Page 164 · click to enlarge
Page 164

Understanding the printer menus 164

Shortcut List Print a report containing information about configured shortcuts.

Fax Job Log Print a report containing information about the last 200 completed faxes.

  • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu.
  • This menu is supported only in select printer models.

Fax Call Log Print a report containing information about the last 100 attempted, received, and blocked calls.

  • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu.
  • This menu is supported only in select printer models.

Copy Shortcuts Print a report containing information about copy shortcuts.

E‑mail Shortcuts Print a report containing information about e‑mail shortcuts.

Fax Shortcuts Print a report containing information about fax shortcuts.

FTP Shortcuts Print a report containing information about FTP shortcuts.

Profiles List Print a list of profiles stored in the printer.

Print Fonts Print a report of all the fonts available for the printer language currently set in the printer.

Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk.

  • Job Buffer Size must be set to 100%.
  • Make sure the optional flash memory or printer hard disk is working and installed correctly.

Asset Report Print a report containing asset information including the printer serial number and model name. The report contains text and UPC bar codes that can be scanned into an asset database.

Network/Ports menu

Active NIC menu

Allow the printer to connect to a network.

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only if an optional network adapter is installed.

Use To · Use To · Active NIC

Page 165 of the Lexmark MX710DHE user manual — Standard Network or Network [x] menu
Page 165 · click to enlarge
Page 165

Understanding the printer menus 165

Standard Network or Network [x] menu

Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel, and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the network input buffer.

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing. This menu only appears when a formatted disk is installed.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only when the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel, and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 10 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Job Buffering · Off On Auto
Page 166 of the Lexmark MX710DHE user manual — UAA LAA
Page 166 · click to enlarge
Page 166

Understanding the printer menus 166

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Standard Network Setup OR Network [x] Setup

Show and set the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Reports
  • Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Network Card
  • Network/Ports > Network [x] > Network [x] Setup > Network Card

View the connection status of the wireless network adapter.

View Card Speed View the speed of an active wireless network adapter.

View the network addresses.

UAA LAA

Show 8 more labels / short text on this page
Use To · Mac Binary PS · On Off Auto · Use To · Use To · View Card Status · Connected Disconnected · Network Address
Page 167 of the Lexmark MX710DHE user manual — TCP/IP menu
Page 167 · click to enlarge
Page 167

Understanding the printer menus 167

Set the amount of time it takes for a network print job to be canceled.

  • “90 seconds” is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved.

Allow the printer to print a banner page.

TCP/IP menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Set Hostname Set the current TCP/IP host name.

IP Address View or change the current TCP/IP address.

Netmask View or change the current TCP/IP netmask.

Gateway View or change the current TCP/IP gateway.

Specify the DHCP address and parameter assignment.

Specify the RARP address assignment setting.

Specify the BOOTP address assignment setting.

Specify the Zero Configuration Networking setting.

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Show 16 more labels / short text on this page
Use To · Job Timeout · 0, 10–225 seconds · Banner Page · Off On · Use To · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No
Page 168 of the Lexmark MX710DHE user manual — IPv6 menu
Page 168 · click to enlarge
Page 168

Understanding the printer menus 168

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address View or change the current WINS server address.

View or change the current DDNS setting.

View or change the current mDNS setting.

DNS Server Address View or change the current DNS server address.

Backup DNS Server Address View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

View or change the current HTTPS setting.

IPv6 menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > IPv6
  • Network/Ports > Network [x] > Network [x] Setup > IPv6

Enable IPv6 in the printer.

Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router.

View Hostname Set the host name.

Enable DHCPv6 in the printer.

Show 17 more labels / short text on this page
Use To · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No · Enable HTTPS · Yes No · Use To · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off
Page 169 of the Lexmark MX710DHE user manual — AppleTalk menu
Page 169 · click to enlarge
Page 169

Understanding the printer menus 169

Wireless menu

To access the menu, navigate to:

Network/Ports > Network [x] > Network [x] Setup > Wireless

Wi‑Fi Protected Setup

Establish a wireless network and enable network security.

Start Push Button Method Start PIN Method

  • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time.
  • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.

Enable/Disable WPS Auto‑detection

Automatically detect the connection method that an access point with WPS uses—Start Push Button Method or Start PIN Method.

Specify the network mode.

  • Infrastructure is the factory default setting. This lets the printer access a network using an access point.
  • Ad hoc configures wireless connection directly between the printer and a computer.

Specify the wireless standard for the wireless network.

802.11b/g 802.11b/g/n

Choose Network Select an available network for the printer to use.

View Signal Quality View the quality of the wireless connection.

View Security Mode View the encryption method for the wireless network.

AppleTalk menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Show 6 more labels / short text on this page
Use To · Enable Disable · Network Mode · BSS Type · Infrastructure Ad hoc · Compatibility
Page 170 of the Lexmark MX710DHE user manual — Standard USB menu
Page 170 · click to enlarge
Page 170

Understanding the printer menus 170

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

View Address Show the assigned AppleTalk address.

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Show 11 more labels / short text on this page
Use To · Activate · Yes No · Set Zone · Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto
Page 171 of the Lexmark MX710DHE user manual — Parallel [x] menu
Page 171 · click to enlarge
Page 171

Understanding the printer menus 171

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Parallel [x] menu

Show 9 more labels / short text on this page
Use To · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway
Page 172 of the Lexmark MX710DHE user manual — Parallel [x] menu
Page 172 · click to enlarge
Page 172

Understanding the printer menus 172

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the parallel input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The parallel buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 10 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Parallel Buffer · Job Buffering · Off On Auto
Page 173 of the Lexmark MX710DHE user manual — Serial [x] menu
Page 173 · click to enlarge
Page 173

Understanding the printer menus 173

Enable bidirectional communication through the parallel port.

  • On is the factory default setting.
  • Off disables parallel port negotiation.

Specify the parallel port protocol.

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • Standard tries to resolve parallel port communication problems.

Determine if the printer honors printer hardware initialization requests from the computer.

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determine if the parallel port data is sampled on the leading or trailing edge of a strobe.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Serial [x] menu

Show 14 more labels / short text on this page
Use To · Advanced Status · On Off · Protocol · Standard Fastbytes · Honor Init · On Off · Parallel Mode 2 · On Off · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway
Page 174 of the Lexmark MX710DHE user manual — Serial [x] menu
Page 174 · click to enlarge
Page 174

Understanding the printer menus 174

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
  • When set to On, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When set to Off, the printer does not perform NPA processing.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the serial input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 8 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Serial Buffer
Page 175 of the Lexmark MX710DHE user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 175 · click to enlarge
Page 175

Understanding the printer menus 175

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Select the hardware and software handshaking settings for the serial port.

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.

Determine whether the printer communicates availability to the computer.

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.

Specify the rate at which data can be received through the serial port.

1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specify the number of data bits sent in each transmission frame.

Show 8 more labels / short text on this page
Use To · Job Buffering · Off On Auto · Protocol · Robust XON · On Off · Baud · Data Bits
Page 176 of the Lexmark MX710DHE user manual — SMTP Setup menu
Page 176 · click to enlarge
Page 176

Understanding the printer menus 176

Set the parity for serial input and output data frames.

Even Odd None Ignore

Determine whether the printer uses the DSR Signal.

  • Off is the factory default setting.
  • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Primary SMTP Gateway Specify SMTP server gateway and port information.

Secondary SMTP Gateway Port

5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.

Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.

Set the printer to use SSL for increased security when connecting to the SMTP server.

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specify the type of user authentication required for scan‑to e‑mail privileges.

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Show 10 more labels / short text on this page
Use To · Parity · Honor DSR · On Off · Use To · Secondary SMTP Gateway · SMTP Timeout · Use SSL · Disabled Negotiate Required · SMTP Server Authentication
Page 177 of the Lexmark MX710DHE user manual — Edit Security Setups menu
Page 177 · click to enlarge
Page 177

Understanding the printer menus 177

Device‑Initiated E‑mail

Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.

None Use Device SMTP Credentials

User‑Initiated E‑mail*

  • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.

None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User

Security menu

Edit Security Setups menu

Create a backup password.

  • Off
  • On Password
  • Off is the factory default setting for “Use Backup Password.”
  • This menu item appears only if a backup password exists.

Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup, Active Directory, LDAP, Password, and PIN.

Internal Accounts NTLM Simple Kerberos Setup Kerberos Setup Active Directory LDAP LDAP+GSSAPI Password PIN

Add or edit a security template.

[list of available templates]

Show 10 more labels / short text on this page
Use To · Device Userid · Device Password · Kerberos 5 Realm · NTLM Domain · Use To · Edit Backup Password · Use Backup Password · Edit Building Blocks · Edit Security Templates
Page 178 of the Lexmark MX710DHE user manual — Miscellaneous Security Settings menu
Page 178 · click to enlarge
Page 178

Understanding the printer menus 178

Control access to printer menus, firmware updates, held jobs, and other access points.

Administrative Menus Function Access Management Solutions Cancel jobs at the Device

Miscellaneous Security Settings menu

Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.

Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1 to 10 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting. 1 indicates the printer does not impose a lockout time.
  • “Panel Login Timeout” specifies how long the printer remains idle on the Home screen before automatically logging the user off. Settings range from 1 to 900 seconds. 30 seconds is the factory default setting.
  • “Remote Login Timeout” specifies how long a remote interface remains idle before automatically logging the user off. Settings range from 1 to 120 seconds. 10 minutes is the factory default setting.

Change the value of the security settings.

Access controls=”No Security” No Effect Reset factory security defaults

  • Access controls=”No Security” retains all the security information that the user has defined. “No Security" is the factory default setting.
  • “No Effect” means the reset has no effect on the device’s security configuration.
  • “Reset factory security defaults” deletes all security information that the user has defined, and assigns the factory default value to each setting in the Miscellaneous Security Settings section of both the panel and the Embedded Web Server.
Show 5 more labels / short text on this page
Use To · Edit Access Controls · Use To · Login Restrictions · Security Reset Jumper
Page 179 of the Lexmark MX710DHE user manual — Confidential Print menu
Page 179 · click to enlarge
Page 179

Understanding the printer menus 179

Allow the user to request a server certificate.

Demand Try Allow Never

  • “Demand” means a server certificate is requested. If a bad certificate is provided or if no certificate is provided, then the session is terminated immediately. “Demand” is the factory default setting.
  • “Try ” means a server certificate is requested. If no certificate is provided, then the session proceeds normally. If a bad certificate is provided, then the session is terminated immediately.
  • “Allow” means a server certificate is requested. If no certificate is provided, then the session proceeds normally. If a bad certificate is provided, then it will be ignored, and then the session proceeds normally.
  • “Never” means no server certificate is requested.

1–16 Limit the digit length of the PIN.

Confidential Print menu

Set a limit on the number of times an invalid PIN can be entered.

  • This menu item appears only when a formatted, working printer hard disk is installed.
  • When the limit is reached, the print jobs for that user name and PIN are deleted.

Set a limit on how long the printer stores confidential print jobs.

Off 1 hour 4 hours 24 hours 1 week

  • If the “Confidential Job Expiration” setting is changed while confidential print jobs reside in the printer memory or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in the printer memory are deleted.

Set a limit on how long the printer stores print jobs.

Off 1 hour 4 hours 24 hours 1 week

Show 8 more labels / short text on this page
Use To · LDAP Certificate Verification · Minimum PIN Length · Use To · Max Invalid PIN · Off 2–10 · Confidential Job Expiration · Repeat Job Expiration
Page 180 of the Lexmark MX710DHE user manual — Security Audit Log menu
Page 180 · click to enlarge
Page 180

Understanding the printer menus 180

Set a limit on how long the printer stores print jobs needing verification.

Off 1 hour 4 hours 24 hours 1 week

Set a limit on how long the printer stores print jobs for printing at a later time.

Off 1 hour 4 hours 24 hours 1 week

Disk Wiping menu

Disk Wiping erases only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Specify the mode for disk wiping.

Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Only automatic wiping enables users to activate disk wiping without having to turn off the printer for an extended amount of time.
  • Highly confidential information should be wiped using only the Multiple pass method.

Security Audit Log menu

Export Log Let an authorized user export the audit log.

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • The audit log can be downloaded from the Embedded Web Server and saved on a computer.
Show 8 more labels / short text on this page
Use To · Verify Job Expiration · Reserve Job Expiration · Use To · Wiping Mode · Auto · Automatic Method · Use To
Page 181 of the Lexmark MX710DHE user manual — Set Date/Time menu
Page 181 · click to enlarge
Page 181

Understanding the printer menus 181

Specify whether or not audit logs are deleted.

Specify how and whether or not audit logs are created.

Yes No Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date/Time menu

Current Date and Time View the current date and time settings for the printer.

Manually Set Date and Time Enter the date and time.

Time Zone Select the time zone.

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Custom Time Zone Setup

Enable the user to set up the time zone.

DST Start Week DST Start Day DST Start Month DST Start Time DST End Week DST End Day DST End Month DST End Time DST Offset

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

NTP Server View the NTP server address.

Show 10 more labels / short text on this page
Use To · Delete Log · Yes No · Configure Log · Enable Audit · Use To · Automatically Observe DST · On Off · Enable NTP · On Off
Page 182 of the Lexmark MX710DHE user manual — General Settings menu
Page 182 · click to enlarge
Page 182

Understanding the printer menus 182

Change the authentication setting to On or Off.

Settings menu

General Settings menu

Set the language of the text appearing on the printer display.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting. This resets the printer to its factory default settings.
  • The Energy setting minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.
Show 6 more labels / short text on this page
Use To · Enable Authentication · On Off · Use To · Display Language · Eco-Mode
Page 183 of the Lexmark MX710DHE user manual — Settings menu
Page 183 · click to enlarge
Page 183

Understanding the printer menus 183

Specify whether or not the ADF sounds a beep when paper is loaded.

ADF Multi‑feed Sensor

Detect when the ADF picks more than one sheet of paper at once.

Reduce the amount of noise produced by the printer.

  • Off is the factory default setting. This supports the performance specifications for your printer.
  • On configures the printer to produce as little noise as possible. This is best suited for printing text and line art.
  • For optimal printing of color ‑ rich documents, set Quiet Mode to Off.
  • Selecting Photo from the printer driver may disable Quiet Mode and provide better print quality and full speed printing.

Instruct the printer to run the setup wizard.

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the “Country select” screen, the default becomes No.
Show 8 more labels / short text on this page
Use To · ADF Loaded Beep · Enabled Disabled · On Off · Quiet Mode · Off On · Run Initial setup · Yes No
Page 184 of the Lexmark MX710DHE user manual — Settings menu
Page 184 · click to enlarge
Page 184

Understanding the printer menus 184

Specify a language and custom key information for the printer keyboard. The additional tabs enable access to accent marks and symbols from the keyboard.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Custom Key [x]

Specify the default paper measurement.

  • U.S. is the factory default setting.
  • The initial setting is determined by your country or region selection in the initial setup wizard.
  • Changing this also changes the default setting for each input source in the Paper Size/Type menu.

Scan to PC Port Range

Specify a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon.

Show 6 more labels / short text on this page
Use To · Keyboard · Keyboard Type · Paper Sizes · US Metric · [port range]
Page 185 of the Lexmark MX710DHE user manual — Settings menu
Page 185 · click to enlarge
Page 185

Understanding the printer menus 185

Specify what is displayed on the upper left and right corners of the home screen.

Left side Right side Custom Text [x]

For the Left side and Right side menus, select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.

Customize the displayed information for Black Toner.

Select from the following options:

Do not display Display Message to display

  • “Do not display” is the factory default setting for “When to display.”
  • “Default” is the factory default setting for “Message to display.”
Show 8 more labels / short text on this page
Use To · Displayed Information · Displayed Information (continued) · Black Toner · When to display · Default Alternate Default · [text entry] Alternate · [text entry]
Page 186 of the Lexmark MX710DHE user manual — Settings menu
Page 186 · click to enlarge
Page 186

Understanding the printer menus 186

Customize the displayed information for Waste Toner Bottle, Paper Jam, Load Paper, and Service Errors.

Waste Toner Bottle Paper Jam Load Paper Service Errors

Select from the following options:

Yes No Message to display

  • “No” is the factory default setting for “Display.”
  • “Default” is the factory default setting for “Message to display.”

Change the icons that appear on the home screen.

Change Language Copy Copy Shortcuts Fax Fax Shortcuts E‑mail E‑mail Shortcuts FTP FTP Shortcuts Search Held Jobs Held Jobs USB Drive Profiles and Solutions Bookmarks Jobs by user Forms and Favorites

For each icon, select from the following options:

Display Do Not display

  • “Display” is the factory default setting for Copy, Fax, E ‑ mail, FTP, Search Held Jobs, Held jobs, USB Drive, and Forms and Favorites.
  • “Do not display” is the factory default setting for Change Language, Copy Shortcuts, Fax Shortcuts, Email Shortcuts, FTP Shortcuts, Profiles and Solutions, Bookmarks, and Jobs by user.

Format the printer date.

MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD

  • MM ‑ DD ‑ YYYY is the U.S. factory default setting.
  • DD-MM-YYYY is the international factory default setting.

Format the printer time.

12 hour A.M./P.M. 24 hour clock

Show 9 more labels / short text on this page
Use To · Displayed Information (continued) · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization · Date Format · Time Format
Page 187 of the Lexmark MX710DHE user manual — Settings menu
Page 187 · click to enlarge
Page 187

Understanding the printer menus 187

20–100 Specify the brightness of the printer control panel screen.

Set copies from the scanner glass to only one page at a time.

Set the amount of light from the standard bin.

  • Dim is the factory default setting if Eco-Mode is set to Energy or Energy/Paper.
  • Bright is the factory default setting if Eco-Mode is Off or set to Paper.

Determine if indicator lights blink when the printer encounters errors.

Set the audio volume for the buttons.

  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Provide touch‑screen sensation feedback.

Specify whether bookmarks are displayed from the Held Jobs area.

Specify whether image background removal is allowed in copy, fax, e‑mail, FTP, or scan‑to‑USB jobs.

Allow Custom Job Scans

Scan multiple jobs to one file.

Specify how a scanned job should be reloaded if a paper jam occurs in the ADF.

Job level Page level

  • “Job level” is the factory default setting.
  • If “Job level” is selected, then the entire job must be rescanned if any pages jam.
  • If “Page level” is selected, then rescan from the jammed page forward.
Show 20 more labels / short text on this page
Use To · Screen Brightness · One Page Copy · Off On · Output Lighting · Normal/Standby Mode · Off Dim Bright · Error Lighting · On Off · Audio Feedback · Button Feedback · On Off Volume · Tactile Touchscreen Feedback · On Off · Show Bookmarks · Yes No · Allow Background Removal · On Off · On Off · Scanner Jam Recovery
Page 188 of the Lexmark MX710DHE user manual — Settings menu
Page 188 · click to enlarge
Page 188

Understanding the printer menus 188

Web Page Refresh Rate

30–300 Specify the number of seconds between Embedded Web Server refreshes.

Contact Name Specify a contact name for the printer.

Location Specify the location of the printer.

Set an alarm to sound when the printer requires operator intervention.

Alarm Control Cartridge Alarm

For each alarm type, select from the following options:

  • Single is the factory default setting for Alarm Control. This sounds three quick beeps.
  • Off is the factory default setting for Cartridge Alarm. This means no alarm will sound.
  • Continuous repeats three beeps every 10 seconds.

Specify the number of minutes of inactivity before the printer enters a lower power state.

Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state.

Disabled 1‑180

  • 30 is the factory default setting.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.
Show 8 more labels / short text on this page
Use To · Alarms · Off Single Continuous · Timeouts · Standby Mode · Disabled 1–240 · Timeouts · Sleep Mode
Page 189 of the Lexmark MX710DHE user manual — Settings menu
Page 189 · click to enlarge
Page 189

Understanding the printer menus 189

Set the printer to operate at a low power state.

Disabled 1–3 hr 6 hr 1–3 days 1–2 weeks 1 month

Set the printer to Hibernate Timeout even when there is an active Ethernet or a phone connection.

Hibernate Timeout on Connection

Hibernate Do Not Hibernate

Set the amount of time in seconds the printer waits before returning the printer display to a Ready state.

Set the printer to continue a specified job without returning to the home screen when the screen timeout timer expires.

Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.

  • 90 is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This has no effect on PostScript emulation print jobs.

Set the amount of time in seconds the printer waits for additional data before canceling a print job.

  • 40 is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This has no effect on PCL emulation print jobs.
Show 15 more labels / short text on this page
Use To · Timeouts · Hibernate Timeout · Timeouts · Timeouts · Screen Timeout · Timeouts · Prolong Screen Timeout · On Off · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535
Page 190 of the Lexmark MX710DHE user manual — Settings menu
Page 190 · click to enlarge
Page 190

Understanding the printer menus 190

Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue.

  • 30 is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Automatically reboot the printer back into the normal operation.

Reboot when idle Reboot always Reboot never

Determine the number of automatic reboots the printer can perform.

Let the printer automatically continue printing from certain offline situations when not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Set the printer to automatically check for jammed paper.

Let the printer successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.
Show 19 more labels / short text on this page
Use To · Timeouts · Job Hold Timeout · Error Recovery · Auto Reboot · Error Recovery · Max Auto Reboots · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Jam Assist · On Off · Print Recovery · Page Protect · Off On
Page 191 of the Lexmark MX710DHE user manual — Settings menu
Page 191 · click to enlarge
Page 191

Understanding the printer menus 191

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do Nothing Sleep Hibernate

  • Sleep is the factory default setting.
  • Sleep or Hibernate sets the printer to operate at a lower power configuration.
  • If the printer is in Sleep mode, then the display appears off and the Sleep button turns amber in color.
  • Touch anywhere on the display or press a button on the printer control panel to exit Sleep mode.
  • If the printer is in Hibernate mode, then the display is completely off and the Sleep button turns amber and is blinking.

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do Nothing Sleep Hibernate

  • Do Nothing is the factory default setting.
  • Sleep or Hibernate sets the printer to operate at a lower power configuration.
  • If the printer is in Sleep mode, then the display appears off and the Sleep button turns amber.
  • Press and hold the Sleep button for three seconds or longer to enter Hibernate mode.
  • Touch anywhere on the display or press a button on the printer control panel to exit Sleep mode.

Restore the printer settings to the factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. This keeps the user ‑ defined settings.
  • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Downloads stored in flash memory or in a printer hard disk are not affected.

Use To · Press Sleep Button · Factory Defaults

Page 192 of the Lexmark MX710DHE user manual — Copy Settings menu items and descriptions
Page 192 · click to enlarge
Page 192

Understanding the printer menus 192

Copy Settings menu

Copy Settings menu items and descriptions

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify whether an original document is two‑sided (duplex) or one‑sided, and then to specify whether the copy should be two‑sided or one‑sided.

1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided

  • 1 sided to 1 sided —The original document has print on one side and the copy will also have print on one side.
  • 1 sided to 2 sided —The original document has print on one side, while the copy will have print on both sides.
  • 2 sided to 1 sided —The original document has print on both sides, while the copy will have print on just one side.
  • 2 sided to 2 sided —The original document has print on both sides, and the copy will also have print on both sides.

Allow copying two or four sheets of a document on one page.

Off 2‑up Portrait 4‑up Portrait 2‑up Landscape 4‑up Landscape

Specify whether or not a border is printed.

Keep the pages of a print job stacked in sequence when printing multiple copies.

1,1,1 ‑ 2,2,2 1,2,3 ‑ 1,2,3

Show 8 more labels / short text on this page
Use To · Content Type · Content Source · Sides (Duplex) · Paper Saver · Print Page Borders · On Off · Collate
Page 193 of the Lexmark MX710DHE user manual — Copy Settings menu
Page 193 · click to enlarge
Page 193

Understanding the printer menus 193

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. ID Card

  • Letter is the U.S. factory default setting.
  • A4 is the international factory default setting.

Specify the paper source for copy jobs.

Tray [x] Auto Size Match Manual Feeder

Place a sheet of paper between transparencies.

Place a sheet of paper between pages, copies, or jobs.

Off Between Copies Between Jobs Between Pages

Specify the separator sheet source.

Tray [x] Manual Feeder

1–9 Specify the level of darkness for the copy job.

Show 8 more labels / short text on this page
Use To · Original Size · Copy To Source · Transparency Separators · On Off · Separator Sheets · Separator Sheet Source · Darkness
Page 194 of the Lexmark MX710DHE user manual — Copy Settings menu
Page 194 · click to enlarge
Page 194

Understanding the printer menus 194

Specify the standard bin to be used for the copy job.

Standard Bin Bin [x]

  • Standard Bin is the factory default setting.
  • Bin [x] only appears when at least one optional bin is installed.

1–999 Specify the number of copies for the copy job.

Specify the header or footer information and its location on the page.

For the location, select from the following options:

Off Date/Time Page number Custom text Print on

  • Top left
  • Top middle
  • Top right
  • Bottom left
  • Bottom middle
  • Bottom right

All pages First page only All but first page Custom text

  • Off is the factory default setting for the location.
  • “All pages” is the factory default setting for “Print on.”

Specify the overlay text printed on each page of the copy job.

Confidential Copy Draft Urgent Custom Off

Custom Overlay Specify the custom overlay text.

Allow interruption of a print job to copy a page or document.

Copy, in a single copy job, a document that contains mixed paper sizes.

  • Off is the factory default setting.
  • This menu appears only when a working printer hard disk is installed.

Allow Save as Shortcut

Save custom copy settings as shortcuts.

Adjust the amount of background visible on a copy.

‑4 to 4

Show 12 more labels / short text on this page
Use To · Output Bin · Number of Copies · Header/Footer · [Location] · Overlay · Allow priority copies · On Off · Custom Job scanning · On Off · On Off · Background Removal
Page 195 of the Lexmark MX710DHE user manual — General Fax Settings
Page 195 · click to enlarge
Page 195

Understanding the printer menus 195

Automatically center the content on the page.

Specify the contrast used for the copy job.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a copy.

‑4 to 4

1–5 Adjust the amount of sharpness of a copy.

Create a sample copy of the original document.

Fax Settings menu

Fax Mode (Analog Fax Setup) menu

Analog Fax Setup mode sends the fax job through a telephone line.

General Fax Settings

Fax Name Specify the name of the fax in the printer.

Fax Number Specify the telephone number assigned to the fax.

Specify how the fax is identified.

Fax Name Fax Number

Set the printer to fax manually, which requires a line splitter and a telephone handset.

  • Off is the factory default setting.
  • Use a regular telephone to answer an incoming fax job and to dial a fax number.
  • Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Show 16 more labels / short text on this page
Use To · Auto Center · Off On · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Sharpness · Sample Copy · Off On · Use To · Fax ID · Enable Manual Fax · On Off
Page 196 of the Lexmark MX710DHE user manual — Fax Settings menu
Page 196 · click to enlarge
Page 196

Understanding the printer menus 196

Define the allocation of non-volatile memory between sending and receiving fax jobs.

All receive Mostly receive Equal Mostly send All send

  • “Equal” is the factory default setting. This splits the memory for sending and receiving fax jobs into equal amounts.
  • “Mostly send” specifies that most of the memory is set to send fax jobs.
  • “All send” specifies that all the memory is set to send fax jobs.
  • “All receive” specifies that all the memory is set to receive fax jobs.
  • “Mostly receive” specifies that most of the memory is set to receive fax jobs.

Specify whether or not the printer cancels fax jobs.

Specify the type of caller ID being used.

Specify the direction from where digits are masked in an outgoing fax number.

Off From left From right

  • Off is the factory default setting.
  • The number of characters masked is determined by the “Digits to Mask” setting.

0–58 Specify the number of digits to mask in an outgoing fax number.

Show 8 more labels / short text on this page
Use To · Memory Use · Cancel Faxes · Allow Don't Allow · Caller ID · Off Primary Alternate · Fax number masking · Digits to Mask
Page 197 of the Lexmark MX710DHE user manual — Fax Send Settings
Page 197 · click to enlarge
Page 197

Understanding the printer menus 197

Configure the fax cover page.

Off by default On by default Never use Always use Include to Field

On Off Include from Field

On Off From Include Message Field

On Off Message Include Logo

On Off Include Footer [x]

On Off Footer [x]

Fax Send Settings

Specify quality in dots per inch (dpi). A higher resolution gives better print quality, but increases the fax transmission time for outgoing faxes.

Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi

Show 5 more labels / short text on this page
Use To · Fax Cover Page · Fax Cover Page · Use To · Resolution
Page 198 of the Lexmark MX710DHE user manual — Fax Settings menu
Page 198 · click to enlarge
Page 198

Understanding the printer menus 198

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

Specify how the text and graphics are oriented on a page.

Off Long edge Short edge

  • Off is the factory default setting.
  • “Long edge” assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • “Short edge” assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Inkjet Photo/Film Magazine Newspaper Press Other

1–9 Lighten or darken the output.

Dial Prefix Enter a dialing prefix, such as 99. A numeric entry field is provided.

Show 6 more labels / short text on this page
Use To · Original Size · Sides (Duplex) · Content Type · Content Source · Darkness
Page 199 of the Lexmark MX710DHE user manual — Fax Settings menu
Page 199 · click to enlarge
Page 199

Understanding the printer menus 199

Establish a dialing prefix rule.

0–9 Specify the number of times the printer tries to send the fax to a specified number.

1–200 Specify the number of minutes between redials.

Enable or disable switchboard blind dialing without a dial tone.

Enable or disable Error Correction Mode for fax jobs.

Fax files that are scanned at the printer.

Allow the printer driver to send fax jobs.

Allow Save as Shortcut

Save fax numbers as shortcuts in the printer.

Specify the dialing sound, either as a tone or a pulse.

Specify the maximum speed in baud at which faxes are sent.

2400 4800 9600 14400 33600

Scan a document that contains mixed paper sizes into a single file.

Specify whether a preview will appear on the display for scan jobs.

Adjust the amount of background visible on a scanned image.

‑4 to 4

Specify the contrast in the scanned image.

0–5 Best for content

Show 23 more labels / short text on this page
Use To · Dialing Prefix Rules · Prefix Rule [x] · Automatic Redial · Redial frequency · Behind a PABX · Yes No · Enable ECM · Yes No · Enable Fax Scans · On Off · Driver to fax · Yes No · On Off · Dial Mode · Tone Pulse · Max Speed · Custom Job scanning · On Off · Scan Preview · On Off · Background Removal · Contrast
Page 200 of the Lexmark MX710DHE user manual — Fax Receive Settings
Page 200 · click to enlarge
Page 200

Understanding the printer menus 200

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible.

‑4 to 4

Specify if the original document is scanned edge-to‑edge prior to faxing.

Scan edge to edge

1–5 Adjust the sharpness of a fax.

Specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Fax Receive Settings

Allow the printer to receive fax jobs.

Remove fax jobs from the print queue when the job requires specific unavailable resources.

None Toner Toner and Supplies

1–25 Specify the number of rings before answering an incoming fax job.

Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source.

Specify the paper source for printing incoming fax jobs.

Auto Tray [x] Multi‑Purpose Feeder

Enable two‑sided (duplex) printing for incoming fax jobs.

Show 19 more labels / short text on this page
Use To · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Off On · Sharpness · Temperature · Use To · Enable Fax Receive · On Off · Fax Job Waiting · Rings to Answer · Auto Reduction · On Off · Paper Source · Sides (Duplex) · Off On
Page 201 of the Lexmark MX710DHE user manual — Fax Settings menu
Page 201 · click to enlarge
Page 201

Understanding the printer menus 201

Enable the printer to include separator sheets for incoming fax jobs.

Off Before Job After Job

Specify where the printer picks the separator sheet.

Tray [x] Manual Feeder

Specify a bin for received faxes.

Standard Bin Bin [x]

Print the transmission information at the bottom of each page from a received fax.

Specify the maximum speed in baud at which faxes are received.

2400 4800 9600 14400 33600

Enable forwarding of received faxes to another recipient.

Print Print and Forward Forward

Specify the type of recipient to which faxes will be forwarded.

Fax E‑mail FTP LDSS eSF

  • Fax is the factory default setting.
  • This menu item is available only from the printer Embedded Web Server.

Forward to Shortcut Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF).

Block No Name Fax

Enable blocking of incoming faxes sent from devices with no fax ID specified.

Banned Fax List Enable the list of blocked fax numbers stored in the printer.

Enable fax holding all of the time or according to set schedule.

Off Always On Manual Scheduled Fax Holding Schedule

Show 12 more labels / short text on this page
Use To · Separator Sheets · Separator Sheet Source · Output Bin · Fax Footer · On Off · Max Speed · Fax Forwarding · Forward to · Off On · Holding Faxes · Held Fax Mode
Page 202 of the Lexmark MX710DHE user manual — Speaker Settings
Page 202 · click to enlarge
Page 202

Understanding the printer menus 202

Fax Log Settings

Enable printing of a transmission log after each fax job.

Print log Do not print log Print only for error

Enable printing of a receive error log following a receive error.

Print Never Print on Error

Enable automatic printing of fax logs.

  • On is the factory default setting.
  • Logs print after every 200 fax jobs.

Specify the source of the paper used for printing logs.

Tray [x] Manual Feeder

Specify whether printed logs display the dialed number or fax name returned.

Remote Station Name Dialed Number

Enable access to the Fax Job log.

Enable access to the Fax Call log.

Specify the bin where fax logs are printed.

Standard Bin Bin [x]

Speaker Settings

Specify the mode of the speaker.

Always Off On until Connected Always On

  • “On until Connected” is the factory default setting. A sound is issued until the fax connection is made.
  • Always On turns the speaker on.
  • Always Off turns the speaker off.

Control the volume setting.

Show 16 more labels / short text on this page
Use To · Transmission Log · Receive Error Log · Auto Print Logs · On Off · Log Paper Source · Logs Display · Enable Job Log · On Off · Enable Call Log · On Off · Log Output Bin · Use To · Speaker Mode · Speaker Volume · High Low
Page 203 of the Lexmark MX710DHE user manual — 0–65535 KB
Page 203 · click to enlarge
Page 203

Understanding the printer menus 203

Control the fax speaker ringer volume.

Answer On

All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only

Specify ring patterns when the printer is answering calls.

E ‑ mail Settings menu

E‑mail Server Setup

Specify e‑mail server information.

Subject Message File Name

  • The subject field has a limitation of 255 characters.
  • The message field has a limitation of 512 characters.

E‑mail Server Setup

Send a copy of the e-mail to the sender.

Send me a copy

Never appears On by default Off by default Always On

E‑mail Server Setup

Specify the maximum e-mail size in kilobytes (KB).

Max E‑mail size

0–65535 KB

E‑mail Server Setup

Send a message when an e-mail is bigger than the configured size limit.

E‑mail Server Setup

Specify a domain name, such as a company domain name, and then limits e‑mail destinations only to that domain name.

  • E-mail can be sent only to the specified domain.
  • The limit is one domain.
Show 7 more labels / short text on this page
Use To · Ringer Volume · Off On · Use To · Use To · Size Error Message · Limit destinations
Page 204 of the Lexmark MX710DHE user manual — E-mail Settings menu
Page 204 · click to enlarge
Page 204

Understanding the printer menus 204

E‑mail Server Setup

Define the e‑mail server path name; for example: /directory/path.

Server Login Password Path File Name Web Link

Specify the format of the scanned file.

PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version of the PDF file that will be scanned for e‑mailing.

1.2–1.6 A–1a

Specify the content of the original document.

Graphics Text Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify the resolution of the scan in dots per inch.

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Specify the orientation of the scanned image.

Show 10 more labels / short text on this page
Use To · Web Link Setup · Format · PDF Version · Content Type · Content Source · Resolution · Darkness · Orientation · Portrait Landscape
Page 205 of the Lexmark MX710DHE user manual — E-mail Settings menu
Page 205 · click to enlarge
Page 205

Understanding the printer menus 205

Specify the paper size of the document being scanned.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

  • A4 is the international factory default setting.
  • Letter is the U.S. factory default setting.

Specify how text and graphics are oriented on the page.

Off Long Edge Short Edge

  • Off is the factory default setting.
  • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Set the quality of a JPEG photo image in relation to file size and quality of the image.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size and quality of the image.
  • 90 provides the best image quality, but the file size is very large.
  • This menu setting applies to all scan functions.

5–90 Set the quality of a text image in relation to file size and quality of the image.

5–90 Set the quality of a text or photo image in relation to file size and the quality of the image.

Show 6 more labels / short text on this page
Use To · Original Size · Sides (Duplex) · JPEG Quality · Text Default · Text/Photo Default
Page 206 of the Lexmark MX710DHE user manual — E-mail Settings menu
Page 206 · click to enlarge
Page 206

Understanding the printer menus 206

5–90 Set the quality of a photo image in relation to file size and the quality of the image.

E‑mail images sent as

Specify how the images are sent.

Use Multi‑Page Tiff

Choose between single-page TIFF files and multiple‑page TIFF files. For a multiple- page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.

  • On is the factory default setting.
  • This menu setting applies to all scan functions.

Specify whether or not the transmission log prints.

Print log Do not print log Print only for error

Specify the paper source for printing e-mail logs.

Tray [x] Manual Feeder

Specify the bin for FTP logs.

Standard Bin Bin [x]

  • Standard Bin is the factory default setting.
  • Bin [x] appears only when at least one optional bin is installed.

Copy a document that contains mixed paper sizes.

Specify whether or not a preview will appear on the display for scan jobs.

Allow Save as Shortcut

Save e-mail addresses as shortcuts.

  • On is the factory default setting.
  • When set to Off, the Save As Shortcut button does not appear on the e-mail Destination screen.

Adjust the amount of background visible on a scanned image.

‑4 to 4

Specify the contrast of the output.

0–5 Best for content

Show 14 more labels / short text on this page
Use To · Photo Default · Attachment Web Link · On Off · Transmission Log · Log Paper Source · Log Output Bin · Custom Job scanning · On Off · Scan Preview · On Off · On Off · Background Removal · Contrast
Page 207 of the Lexmark MX710DHE user manual — FTP Settings menu
Page 207 · click to enlarge
Page 207

Understanding the printer menus 207

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

1–5 Adjust the amount of sharpness on a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Use cc:/bcc:

Enable the use of the “cc:” and “bcc:” fields.

FTP Settings menu

Specify the format of the file for FTP sending.

PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version level of the PDF file for FTP sending.

1.2–1.6 A–1a

Specify the content of the original document.

Text Graphics Text/Photo Photo

Show 14 more labels / short text on this page
Use To · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Off On · Sharpness · Temperature · Off On · Use To · Format · PDF Version · Content Type
Page 208 of the Lexmark MX710DHE user manual — FTP Settings menu
Page 208 · click to enlarge
Page 208

Understanding the printer menus 208

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify the quality of the scan in dots per inch (dpi).

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Specify the page orientation of the scanned image.

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

  • Letter is the U.S. factory default setting.
  • A4 is the international factory default setting.
Show 7 more labels / short text on this page
Use To · Content Source · Resolution · Darkness · Orientation · Portrait Landscape · Original Size
Page 209 of the Lexmark MX710DHE user manual — FTP Settings menu
Page 209 · click to enlarge
Page 209

Understanding the printer menus 209

Specify the page orientation of text and graphics.

Off Long Edge Short Edge

  • Off is the factory default setting.
  • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape ).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape ).

Set the quality of a JPEG photo image in relation to the file size and quality of the image.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.
  • This menu setting applies to all scan functions.

5–90 Set the quality of the text in relation to the file size and quality of the image.

5–90 Set the quality of a text/photo image in relation to the file size and quality of the image.

5–90 Set the quality of a photo image in relation to the file size and quality of the image.

Use Multi‑Page TIFF

Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.

  • On is the factory default setting.
  • This menu setting applies to all scan functions.

Specify whether the transmission log prints.

Print log Do not print log Print only for error

Specify a paper source when printing FTP logs.

Tray [x] Manual Feeder

Specify the bin for FTP logs.

Standard Bin Bin [x]

  • Standard Bin is the factory default setting.
  • Bin [x] only appears when at least one optional bin is installed.
Show 10 more labels / short text on this page
Use To · Sides (Duplex) · JPEG Quality · Text Default · Text/Photo Default · Photo Default · On Off · Transmission Log · Log Paper Source · Log Output Bin
Page 210 of the Lexmark MX710DHE user manual — FTP Settings menu
Page 210 · click to enlarge
Page 210

Understanding the printer menus 210

File Name Enter a base file name.

Copy a document that contains mixed paper sizes into a single scan job.

Specify whether a preview will appear on the display for scan jobs.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Allow Save as Shortcut

Enable shortcut creation for FTP addresses.

Adjust the amount of background visible on a copy.

‑4 to 4

Specify the contrast of the output.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

1–5 Adjust the amount of sharpness of a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Show 16 more labels / short text on this page
Use To · Custom Job Scanning · Off On · Scan Preview · On Off · On Off · Background Removal · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Off On · Sharpness · Temperature
Page 211 of the Lexmark MX710DHE user manual — Scan Settings
Page 211 · click to enlarge
Page 211

Understanding the printer menus 211

Flash Drive menu

Scan Settings

Specify the format of the file to be sent through FTP.

PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version of the PDF file to be sent through FTP.

1.2–1.6 A‑1a

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify the resolution of the scan in dots per inch (dpi).

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Specify the orientation of the scanned image.

Show 9 more labels / short text on this page
Use To · Format · PDF Version · Content Type · Content Source · Resolution · Darkness · Orientation · Portrait Landscape
Page 212 of the Lexmark MX710DHE user manual — Flash Drive menu
Page 212 · click to enlarge
Page 212

Understanding the printer menus 212

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Difficult Media Letter Difficult Media A5 Difficult Media Legal Difficult Media A4 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

Specify how the text and graphics are oriented on a page.

Off Long edge Short edge

  • Off is the factory default setting.
  • “Long edge” assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • “Short edge” assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Set the quality of a JPEG photo image in relation to file size and quality.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.
  • This menu item applies to all scan functions.

5–90 Set the quality of the text in relation to file size and the quality of the image.

Text or Photo Default

5–90 Set the quality of a text or photo image in relation to file size and quality.

5–90 Set the quality of a photo image in relation to file size and quality.

Show 6 more labels / short text on this page
Use To · Original Size · Sides (Duplex) · JPEG Quality · Text Default · Photo Default
Page 213 of the Lexmark MX710DHE user manual — Print Settings
Page 213 · click to enlarge
Page 213

Understanding the printer menus 213

Use Multi‑Page TIFF

Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page.

  • On is the factory default setting.
  • This menu item applies to all scan functions.

File Name Type a base file name.

Copy a document containing mixed paper sizes in a single copy job.

Specify whether a preview appears on the display for scan jobs.

Adjust the amount of background visible on a copy.

‑4 to 4

Specify the contrast of the scanned image.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

1–5 Adjust the amount of sharpness on a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Print Settings

1–999 Specify a default number of copies for each print job.

Show 18 more labels / short text on this page
Use To · On Off · Custom Job Scanning · On Off · Scan Preview · On Off · Background Removal · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Off On · Sharpness · Temperature · Use To · Copies
Page 214 of the Lexmark MX710DHE user manual — Flash Drive menu
Page 214 · click to enlarge
Page 214

Understanding the printer menus 214

Set a default paper source for all print jobs.

Tray [x] MP Feeder Manual Paper Manual Envelope

Stack the pages of a print job in sequence when printing multiple copies.

1,1,1 ‑ 2,2,2 1,2,3 ‑ 1,2,3

Specify whether prints are on one side or on both sides of the page.

1 sided 2 sided

Define binding for duplexed pages in relation to page orientation.

Long Edge Short Edge

  • Long Edge sets binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge sets binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify that multiple pages are printed on one side of a sheet.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of pages that will print per side.

Print multiple-page images on one side of a paper.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of pages and whether they are in portrait or landscape orientation.

Specify the orientation of a multiple‑page document.

Print a border on each page image.

Show 11 more labels / short text on this page
Use To · Paper Source · Collate · Sides (Duplex) · Duplex Binding · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid
Page 215 of the Lexmark MX710DHE user manual — Setup menu
Page 215 · click to enlarge
Page 215

Understanding the printer menus 215

Specify whether to insert blank separator sheets.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “1,2,3 ‑ 1,2,3.” If Collate is set to “1,1,1 ‑ 2,2,2,” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or when inserting blank pages in a document .

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

Specify whether to insert blank pages in a print job.

Do Not Print Print

Print Settings

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PS Emulation is the factory default printer language.
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Specify that print jobs be removed from the print queue if they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu appears only when a printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.
Show 8 more labels / short text on this page
Use To · Separator Sheets · Separator Sheet Source · Blank Pages · Use To · Printer Language · Job Waiting · On Off
Page 216 of the Lexmark MX710DHE user manual — Print Settings
Page 216 · click to enlarge
Page 216

Understanding the printer menus 216

Set the logical and physical printable area.

Normal Fit to Page Whole Page

  • Normal is the factory default setting. When attempting to print data in the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting. Whole Page only affects pages printed using a PCL 5e interpreter. This has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

  • RAM is the factory default setting. Storing downloads in the RAM is temporary.
  • Storing downloads in the flash memory or in a printer hard disk places them in permanent storage. Downloads remain in the flash memory or in the printer hard disk even when the printer is turned off.
  • This menu appears only when a formatted, working flash drive or printer hard disk is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a job that requires more memory than is available.

  • Off is the factory default setting. This sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On retains the downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears, and downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All is selected.

Alphabetical Oldest First Newest First

Show 7 more labels / short text on this page
Use To · Print Area · Download Target · RAM Flash Disk · Resource Save · On Off · Print All Order
Page 217 of the Lexmark MX710DHE user manual — Finishing menu
Page 217 · click to enlarge
Page 217

Understanding the printer menus 217

Finishing menu

Specify whether two‑sided (duplex) printing is set as the default for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the software program. For Windows users:

Click File > Print, and then click Properties, Preferences, Options, or Setup. For Macintosh users: Choose File > Print, and then adjust the settings from the print dialog and pop‑up menus.

Define the way duplexed pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

Specify whether blank pages are inserted in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

1,1,1 ‑ 2,2,2 1,2,3 ‑ 1,2,3

  • “1,1,1 ‑ 2,2,2” is the factory default setting.
  • “1,2,3 ‑ 1,2,3” stacks the print job in sequence.

Specify whether blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “1,2,3 ‑ 1,2,3.” If Collate is set to ”1,1,1 ‑ 2,2,2,” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.
Show 7 more labels / short text on this page
Use To · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets
Page 218 of the Lexmark MX710DHE user manual — Quality menu
Page 218 · click to enlarge
Page 218

Understanding the printer menus 218

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to appear as a menu setting.

Print multiple pages on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of pages that will print per side.

Specify the positioning of multiple pages when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of pages and whether they are in portrait or landscape orientation.

Specify the orientation of a multiple‑page document.

Print a border when using Paper Saver.

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Show 10 more labels / short text on this page
Use To · Separator Source · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Use To · Print Resolution
Page 219 of the Lexmark MX710DHE user manual — Job Accounting menu
Page 219 · click to enlarge
Page 219

Understanding the printer menus 219

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions Isolated

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • You can set this option from the printer software. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

Job Accounting menu

Determine and set if the printer creates a log of the print jobs it receives.

Job Accounting Utilities Print and delete log files or export them to a flash drive.

Show 12 more labels / short text on this page
Use To · Pixel Boost · Toner Darkness · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Job Accounting Log · Off On
Page 220 of the Lexmark MX710DHE user manual — Job Accounting menu
Page 220 · click to enlarge
Page 220

Understanding the printer menus 220

Determine and set how often a log file is created.

Log Action at End of Frequency

Determine and set how the printer responds when the frequency threshold expires.

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Disk Near Full Level

Specify the maximum size of the log file before the printer executes the Disk Near Full Action.

Disk Near Full Action

Determine and set how the printer responds when the printer hard disk is nearly full.

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Disk Near Full Level determines when this action is triggered.

Determine and set how the printer responds when disk usage reaches the maximum limit (100MB).

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Determine and set where the printer posts job accounting logs.

E‑mail Address to Send Logs Specify the e‑mail address to which the printer sends job accounting logs.

Log File Prefix Specify the prefix you want for the log file name.

Show 5 more labels / short text on this page
Use To · Accounting Log Frequency · Weekly Monthly · Off 1–99 · Disk Full Action
Page 221 of the Lexmark MX710DHE user manual — Utilities menu
Page 221 · click to enlarge
Page 221

Understanding the printer menus 221

Utilities menu

Delete confidential and held jobs from the printer hard disk.

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
  • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory.

Format the flash memory.

  • Yes deletes all data stored in flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a non ‑ defective flash memory card is installed.

Delete Downloads on Disk

Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs.

Delete Now Do Not Delete

  • Delete Now sets the printer to delete the downloads and allows the display to return to the originating screen after the deletion.
  • Do Not Delete sets the printer display to return to the main Utilities menu for touch ‑ screen printer models. When selected in non ‑ touch ‑ screen printer models, Do Not Delete sets the printer to return to the originating screen after the deletion.

Activate Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off or reset the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

Show 6 more labels / short text on this page
Use To · Remove Held Jobs · Format Flash · Yes No · Coverage Estimator · Off On
Page 222 of the Lexmark MX710DHE user manual — PostScript menu
Page 222 · click to enlarge
Page 222

Understanding the printer menus 222

XPS menu

Print a page containing information on errors, including XML markup errors.

PDF menu

Scale page content to fit the selected paper size.

Print annotations in a PDF.

Do Not Print Print

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Disable the SysStart file.

Establish the font search order.

  • Resident is the factory default setting.
  • This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.
  • Make sure the flash memory option or printer hard disk is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.
Show 13 more labels / short text on this page
Use To · Print Error Pages · Off On · Use To · Scale to Fit · Yes No · Annotations · Use To · Print PS Error · On Off · On Off · Font Priority · Resident Flash/Disk
Page 223 of the Lexmark MX710DHE user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 223 · click to enlarge
Page 223

Understanding the printer menus 223

PCL Emul menu

Specify the set of fonts used by the Font Name menu.

Resident Disk Download Flash All

  • “Resident” is the factory default setting. Resident shows the factory default set of fonts downloaded in the RAM.
  • “Flash” and “Disk” settings show all fonts resident in that option.
  • The flash option must be properly formatted and cannot be read/write ‑ , write ‑ , or password ‑ protected.
  • “Download” shows all the fonts downloaded in the RAM.
  • “All” shows all fonts available to any option.

Identify a specific font and the option where it is stored.

Specify the symbol set for each font name.

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Change the point size for scalable typographic fonts.

1.00–1008.00

  • 12 is the factory default setting.
  • Point size refers to the height of the characters in the font. One point equals approximately 0.014 inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specify the font pitch for scalable monospaced fonts.

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but it cannot be changed.

Specify the orientation of text and graphics on the page.

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.
Show 12 more labels / short text on this page
Use To · Font Source · Font Name · Courier 10 · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape
Page 224 of the Lexmark MX710DHE user manual — PCL Emul menu
Page 224 · click to enlarge
Page 224

Understanding the printer menus 224

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • “198 mm” is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow printing of eighty 10 ‑ pitch characters.

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • “Off” is the factory default setting.
  • “None” ignores the Select Paper Feed command. This option appears only when it is selected by the PCL 5 interpreter.
  • “0–199” allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Show 12 more labels / short text on this page
Use To · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199
Page 225 of the Lexmark MX710DHE user manual — HTML menu
Page 225 · click to enlarge
Page 225

Understanding the printer menus 225

Display the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Restore all tray and feeder assignments to the factory default settings.

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKO

Set the default font for HTML documents.

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

Show 8 more labels / short text on this page
Use To · Tray Renumber · View Factory Defaults · Tray Renumber · Restore Defaults · Yes No · Use To · Font Name
Page 226 of the Lexmark MX710DHE user manual — Image menu
Page 226 · click to enlarge
Page 226

Understanding the printer menus 226

1–255 pt Set the default font size for HTML documents.

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.

1–400% Scale the default font for HTML documents.

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Set the page orientation for HTML documents.

8–255 mm Set the page margin for HTML documents.

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.

Specify whether to print backgrounds on HTML documents.

Do Not Print Print

Image menu

Select the optimal paper size, scaling, and orientation.

Invert bitonal monochrome images.

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scale the image to fit the selected paper size.

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.
Show 13 more labels / short text on this page
Use To · Font Size · Scale · Orientation · Portrait Landscape · Margin Size · Backgrounds · Use To · Auto Fit · On Off · Invert · On Off · Scaling
Page 227 of the Lexmark MX710DHE user manual — Help menu
Page 227 · click to enlarge
Page 227

Understanding the printer menus 227

Set the image orientation.

Portrait Landscape Reverse Portrait Reverse Landscape

Help menu

The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. They contain information about using the printer and performing various tasks, including copying, scanning, and faxing.

English, French, German, and Spanish translations are stored in the printer. Other translations are available at http://support.lexmark.com.

Print All Guides Prints all the guides

Copy Guide Provides information about making copies and changing settings

E‑mail Guide Provides information about sending e‑mails using addresses, shortcut numbers, or the address book, and about changing settings

Fax Guide Provides information about sending faxes using fax numbers, shortcut numbers, or the address book, and about changing settings

FTP Guide Provides information about scanning documents directly to an FTP server using an FTP address, shortcut numbers, or the address book, and about changing settings

Print Defects Guide Provides help in resolving repeating defects in copies or prints

Information Guide Provides help in locating additional information

Supplies Guide Provides part numbers for ordering supplies

Use To · Orientation · Menu item Description

Page 228 of the Lexmark MX710DHE user manual — Avoid paper jams
Page 228 · click to enlarge
Page 228

Saving money and the environment 228

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

To quickly save paper and energy using one printer setting, use Eco-Mode.

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser/LED printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 88.

Conserving supplies

Use both sides of the paper

If your printer model supports duplex printing, then you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or from the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or from the Lexmark Toolbar to see how the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 256.

Page 229 of the Lexmark MX710DHE user manual — Reducing printer noise
Page 229 · click to enlarge
Page 229

Saving money and the environment 229

Saving energy

Using Eco ‑ Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode > select a setting

Off Use the factory default settings for all settings associated with Eco‑Mode. Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until it is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.

Energy/Paper Use all the settings associated with Energy and Paper modes.

  • Plain Paper
  • Enable the automatic two ‑ sided (duplex) feature.
  • Turn off print log features.

3 Click Submit.

Reducing printer noise

Enable Quiet Mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode > select a setting

Use To

Page 230 of the Lexmark MX710DHE user manual — Using the printer control panel
Page 230 · click to enlarge
Page 230

Saving money and the environment 230

On Reduce printer noise.

  • Print jobs are processed at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.

Off Use factory default settings.

3 Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.

Select from 1 to 120 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode, and then touch Submit.

Use To

Page 231 of the Lexmark MX710DHE user manual — Using the Embedded Web Server
Page 231 · click to enlarge
Page 231

Saving money and the environment 231

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are turned off safely.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings

2 From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Hibernate, and then touch Submit.

Adjusting the brightness of the printer display

To save energy, or if you are have trouble reading from the display, adjust the brightness of the display.

Select from 20 to 100. The factory default setting is 100.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Page 232 of the Lexmark MX710DHE user manual — Returning Lexmark cartridges for reuse or recycling
Page 232 · click to enlarge
Page 232

Saving money and the environment 232

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Screen Brightness

2 In the Screen Brightness field, enter the brightness percentage you want for the display, and then touch Submit.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

Page 233 of the Lexmark MX710DHE user manual — Recycling
Page 233 · click to enlarge
Page 233

Saving money and the environment 233

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 234 of the Lexmark MX710DHE user manual — Erasing volatile memory
Page 234 · click to enlarge
Page 234

Securing the printer 234

Securing the printer

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Page 235 of the Lexmark MX710DHE user manual — Using the printer control panel
Page 235 · click to enlarge
Page 235

Securing the printer 235

Erasing non ‑ volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display, instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer restarts several times during this process.

4 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a printer hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar indicates the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer undergoes a power‑on reset, and then returns to normal operating mode.

Page 236 of the Lexmark MX710DHE user manual — Using the printer control panel
Page 236 · click to enlarge
Page 236

Securing the printer 236

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Page 237 of the Lexmark MX710DHE user manual — Finding printer security information
Page 237 · click to enlarge
Page 237

Securing the printer 237

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server Administrator’s Guide for additional information:

1 Go to http://support.lexmark.com, and then click SELECT YOUR PRODUCT.

2 From the “Search by Product Category” section, navigate to Software and Solutions > Other Applications.

3 Click the Manuals tab, and then select the Embedded Web Server Administrator’s Guide.

Page 238 of the Lexmark MX710DHE user manual — Cleaning the printer
Page 238 · click to enlarge
Page 238

Maintaining the printer 238

Maintaining the printer

Cleaning the printer parts

Cleaning the printer

1 Make sure that the printer is turned off and unplugged from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

5 Make sure all areas of the printer are dry before sending a new print job.

Page 239 of the Lexmark MX710DHE user manual — Cleaning the scanner glass
Page 239 · click to enlarge
Page 239

Maintaining the printer 239

Cleaning the scanner glass

Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.

1 Slightly dampen a soft, lint-free cloth or paper towel with water.

2 Open the scanner cover.

Lexmark MX710DHE — Cleaning the scanner glass diagram (page 239)
Fig. 125 · Cleaning the scanner glass

3 Remove the white underside of the scanner cover.

Lexmark MX710DHE — Cleaning the scanner glass diagram (page 239)
Fig. 126 · Cleaning the scanner glass
Page 240 of the Lexmark MX710DHE user manual — Cleaning the scanner glass
Page 240 · click to enlarge
Page 240

Maintaining the printer 240

4 Open the bottom ADF door.

Lexmark MX710DHE — Cleaning the scanner glass diagram (page 240)
Fig. 127 · Cleaning the scanner glass
Lexmark MX710DHE — Cleaning the scanner glass diagram (page 240)
Fig. 128 · Cleaning the scanner glass

5 Wipe the ADF scanner glass under the ADF door.

6 Close the bottom ADF door.

7 Place the white underside of the scanner cover on the scanner glass, and then close the scanner cover.

Lexmark MX710DHE — Cleaning the scanner glass diagram (page 240)
Fig. 129 · Cleaning the scanner glass
Page 241 of the Lexmark MX710DHE user manual — Checking the status of parts and supplies from the Embedded Web Server
Page 241 · click to enlarge
Page 241

Maintaining the printer 241

8 Wipe the areas shown, and then let them dry.

Lexmark MX710DHE — Checking the status of parts and supplies diagram (page 241)
Fig. 130 · Checking the status of parts and supplies

1 White underside of the scanner cover

4 White underside of the ADF cover

9 Close the scanner cover.

Checking the status of parts and supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of parts and supplies on the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

2 Scanner glass · 3 ADF glass

Page 242 of the Lexmark MX710DHE user manual — Ordering toner cartridges
Page 242 · click to enlarge
Page 242

Maintaining the printer 242

Ordering parts and supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the estimated cartridge yield is based on approximately 5% coverage per page.

Ordering toner cartridges

  • The estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.

Item Return Program cartridge

United States and Canada

High Yield Toner Cartridge 621H

Extra High Yield Toner Cartridge 621X*

European Union (EU), European Economic Area (EEA), and Switzerland

High Yield Toner Cartridge 622H

Extra High Yield Toner Cartridge 622X*

* This toner cartridge is supported only in the MX711 printer model.

For more information on countries located in each region, visit www.lexmark.com/regions.

Toner Cartridge 621 · Toner Cartridge 622

Page 243 of the Lexmark MX710DHE user manual — Ordering an imaging unit
Page 243 · click to enlarge
Page 243

Maintaining the printer 243

Item Return Program cartridge

Asia Pacific region (includes Australia and New Zealand)

High Yield Toner Cartridge 623H

Extra High Yield Toner Cartridge 623X*

Latin America (includes Puerto Rico and Mexico)

High Yield Toner Cartridge 624H

Extra High Yield Toner Cartridge 624X*

Africa, Middle East, Central Eastern Europe (non‑EU), and Commonwealth of Independent States (CIS)

High Yield Toner Cartridge 625H

Extra High Yield Toner Cartridge 625X*

* This toner cartridge is supported only in the MX711 printer model.

For more information on countries located in each region, visit www.lexmark.com/regions.

High Yield Toner Cartridge 620HA1

Extra High Yield Toner Cartridge 620XA2

1 This toner cartridge is supported only in the MX710 printer model.

2 This toner cartridge is supported only in the MX711 printer model.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 520Z 520ZA

Show 5 more labels / short text on this page
Toner Cartridge 623 · Toner Cartridge 624 · Toner Cartridge 625 · Item Regular cartridge · Worldwide
Page 244 of the Lexmark MX710DHE user manual — Lexmark ADF maintenance kit
Page 244 · click to enlarge
Page 244

Maintaining the printer 244

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

  • Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser.
  • Using certain types of paper may require more frequent replacement of the maintenance kit.
  • The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.
  • For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with each part.

Lexmark Return Program fuser maintenance kit type

MX710 Series Return Program fuser maintenance kit Type 00 40X8420

MX710 Series Return Program fuser maintenance kit Type 01 40X8421

MX710 Series Return Program fuser maintenance kit Type 02 40X8422

MX710 Series Return Program fuser maintenance kit Type 03 40X8423

MX710 Series Return Program fuser maintenance kit Type 04 40X8424

Lexmark regular fuser maintenance kit type

MX710 Series regular fuser maintenance kit Type 05 40X8425

MX710 Series regular fuser maintenance kit Type 06 40X8426

MX710 Series regular fuser maintenance kit Type 07 40X8427

MX710 Series regular fuser maintenance kit Type 08 40X8428

MX710 Series regular fuser maintenance kit Type 09 40X8429

Lexmark roller kit

MX710 Series roller kit 40X7706

Lexmark ADF maintenance kit

MX710 Series ADF maintenance kit 40X8431

Show 4 more labels / short text on this page
Type Part number · Type Part number · Part number · Part number
Page 245 of the Lexmark MX710DHE user manual — Replacing the toner cartridge
Page 245 · click to enlarge
Page 245

Maintaining the printer 245

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Replacing supplies

Replacing the toner cartridge

1 Lift the front cover, and then pull down the multipurpose feeder door.

Lexmark MX710DHE — Replacing the toner cartridge diagram (page 245)
Fig. 131 · Replacing the toner cartridge
Page 246 of the Lexmark MX710DHE user manual — Storing supplies
Page 246 · click to enlarge
Page 246

Maintaining the printer 246

2 Pull the cartridge out of the printer using the handle.

Lexmark MX710DHE — Storing supplies diagram (page 246)
Fig. 132 · Storing supplies

3 Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner.

Lexmark MX710DHE — Storing supplies diagram (page 246)
Fig. 133 · Storing supplies

4 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Lexmark MX710DHE — Storing supplies diagram (page 246)
Fig. 134 · Storing supplies
Page 247 of the Lexmark MX710DHE user manual — Replacing the imaging unit
Page 247 · click to enlarge
Page 247

Maintaining the printer 247

5 Close the multipurpose feeder door and the front cover.

Replacing the imaging unit

1 Lift the front cover, and then pull down the multipurpose feeder door.

Page 248 of the Lexmark MX710DHE user manual — Replacing the imaging unit
Page 248 · click to enlarge
Page 248

Maintaining the printer 248

2 Pull out the toner cartridge from the printer using the handle.

3 Lift the green handle, and then pull out the imaging unit from the printer.

Lexmark MX710DHE — Replacing the imaging unit diagram (page 248)
Fig. 135 · Replacing the imaging unit
Page 249 of the Lexmark MX710DHE user manual — Replacing the imaging unit
Page 249 · click to enlarge
Page 249

Maintaining the printer 249

4 Unpack the new imaging unit, and then shake it.

Lexmark MX710DHE — Replacing the imaging unit diagram (page 249)
Fig. 136 · Replacing the imaging unit

5 Remove all packing material from the imaging unit.

Lexmark MX710DHE — Replacing the imaging unit diagram (page 249)
Fig. 137 · Replacing the imaging unit

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark MX710DHE — Replacing the imaging unit diagram (page 249)
Fig. 138 · Replacing the imaging unit
Page 250 of the Lexmark MX710DHE user manual — Replacing the imaging unit
Page 250 · click to enlarge
Page 250

Maintaining the printer 250

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

8 Close the multipurpose feeder door and the front cover.

Page 251 of the Lexmark MX710DHE user manual — Before moving the printer
Page 251 · click to enlarge
Page 251

Maintaining the printer 251

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
Lexmark MX710DHE — Before moving the printer diagram (page 251)
Fig. 139 · Before moving the printer
Lexmark MX710DHE — Before moving the printer diagram (page 251)
Fig. 140 · Before moving the printer
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Page 252 of the Lexmark MX710DHE user manual — Shipping the printer
Page 252 · click to enlarge
Page 252

Maintaining the printer 252

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 253 of the Lexmark MX710DHE user manual — Viewing reports
Page 253 · click to enlarge
Page 253

Managing the printer 253

Managing the printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears in the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Setting up e ‑ mail alerts

Configure the printer to send you e‑mail alerts when the supplies are getting low or when the paper needs to be changed or added, or when there is a paper jam.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings.

3 From the Other Settings menu, click E‑mail Alert Setup.

4 Select the items you want to be notified on, and then type the e‑mail addresses.

5 Click Submit.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, network, and supplies.

1 Open a Web browser, and then type the printer IP address in the address field.

Page 254 of the Lexmark MX710DHE user manual — Configuring supply notifications from the Embedded Web Server
Page 254 · click to enlarge
Page 254

Managing the printer 254

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Reports, and then click the type of report you want to view.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Notification Description

Page 255 of the Lexmark MX710DHE user manual — Restoring factory default settings
Page 255 · click to enlarge
Page 255

Managing the printer 255

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 64.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 235.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now > Submit

Page 256 of the Lexmark MX710DHE user manual — Load paper properly
Page 256 · click to enlarge
Page 256

Clearing jams

Jam error messages appear on the printer display and include the area of the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.
Lexmark MX710DHE — Load paper properly diagram (page 256)
Fig. 141 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MX710DHE — Load paper properly diagram (page 256)
Fig. 142 · Load paper properly

Clearing jams 256

Page 257 of the Lexmark MX710DHE user manual — Understanding jam messages and locations
Page 257 · click to enlarge
Page 257
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
Lexmark MX710DHE — Use recommended paper diagram (page 257)
Fig. 143 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the computer or printer control panel.
  • Store paper according to manufacturer recommendations.

Understanding jam messages and locations

When a jam occurs, a message indicating the jam location and information to clear the jam appears on the printer display. Open the doors, covers, and trays indicated on the display to remove the jam.

  • When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output for blank pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints jammed pages if adequate printer memory is available.

Clearing jams 257

Page 258 of the Lexmark MX710DHE user manual — Understanding jam messages and locations
Page 258 · click to enlarge
Page 258
Lexmark MX710DHE — Understanding jam messages and locations diagram (page 258)
Fig. 144 · Understanding jam messages and locations

Area Area name Printer control panel message What to do

1 Upper rear door [x]‑page jam, open upper rear door. [202]

Open the rear door of the printer, and then remove the jammed paper.

[x]‑page jam, open upper and lower rear door. [231‑234]

2 Upper door and rear duplex area

Open the rear door of the printer and the rear duplex area, and then remove the jammed paper.

3 Trays [x]‑page jam, open tray [x]. [24x] Pull out the indicated tray, and then remove the jammed paper.

4 Duplex area [x]‑page jam, remove tray 1 to clear duplex. [235–239]

Pull out tray 1 completely, then push the front duplex flap down, and then remove the jammed paper.

5 Multipurpose feeder [x]‑page jam, clear manual feeder. [250]

Remove all paper from the multipurpose feeder, and then remove the jammed paper.

6 Inside the printer [x]‑page jam, lift front cover to remove cartridge. [200–201]

Open the front cover and the multipurpose feeder, then remove the toner cartridge and the imaging unit, and then remove the jammed paper.

7 Standard bin [x]‑page jam, remove standard bin jam. [203]

Remove all paper from the standard bin, and then remove the jammed paper.

8 Automatic document feeder (ADF)

[x]page jam, open automatic feeder top cover. [28y.xx]

Remove all paper from the ADF tray, and then remove the jammed paper.

Clearing jams 258

Page 259 of the Lexmark MX710DHE user manual — [x] ‑ page jam, lift front cover to remove cartridge. [200–201]
Page 259 · click to enlarge
Page 259

[x] ‑ page jam, lift front cover to remove cartridge. [200–201]

1 Lift the front cover, and then pull down the multipurpose feeder door.

2 Lift the green handle, and then pull out the toner cartridge from the printer.

3 Place the toner cartridge aside.

Clearing jams 259

Page 260 of the Lexmark MX710DHE user manual — [x]-page jam, lift front cover to remove cartridge. [200–201]
Page 260 · click to enlarge
Page 260

4 Lift the green handle, and then pull out the imaging unit from the printer.

Lexmark MX710DHE — [x]-page jam, lift front cover to remove cartridge. [200–201] diagram (page 260)
Fig. 145 · [x]-page jam, lift front cover to remove cartridge.…

5 Place the imaging unit aside on a flat, smooth surface.

6 Pull the jammed paper gently to the right, and then remove it from the printer.

Lexmark MX710DHE — [x]-page jam, lift front cover to remove cartridge. [200–201] diagram (page 260)
Fig. 146 · [x]-page jam, lift front cover to remove cartridge.…

Clearing jams 260

Page 261 of the Lexmark MX710DHE user manual — [x]-page jam, lift front cover to remove cartridge. [200–201]
Page 261 · click to enlarge
Page 261

7 Install the imaging unit.

8 Insert the toner cartridge into the printer, and then push the green handle back into place.

  • Align the arrows on the guides of the toner cartridge with the arrows in the printer.
  • Make sure the cartridge is fully pushed in.

Clearing jams 261

Page 262 of the Lexmark MX710DHE user manual — [x] ‑ page jam, open upper rear door. [202]
Page 262 · click to enlarge
Page 262

9 Close the multipurpose feeder door and the front cover.

10 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, open upper rear door. [202]

1 Pull down the rear door.

Lexmark MX710DHE — [x] ‑ page jam, open upper rear door. [202] diagram (page 262)
Fig. 147 · [x] ‑ page jam, open upper rear door. [202]

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 262

Page 263 of the Lexmark MX710DHE user manual — [x] ‑ page jam, open upper and lower rear door. [231–234]
Page 263 · click to enlarge
Page 263

3 Close the rear door.

4 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, open upper and lower rear door. [231–234]

1 Pull down the rear door.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 263

Page 264 of the Lexmark MX710DHE user manual — [x]-page jam, open upper and lower rear door. [231–234]
Page 264 · click to enlarge
Page 264

3 Close the rear door.

4 Push the back of the standard tray.

Lexmark MX710DHE — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 264)
Fig. 148 · [x]-page jam, open upper and lower rear door. [231–2…
Lexmark MX710DHE — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 264)
Fig. 149 · [x]-page jam, open upper and lower rear door. [231–2…

5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out.

Clearing jams 264

Page 265 of the Lexmark MX710DHE user manual — [x] ‑ page jam, remove standard bin jam. [203]
Page 265 · click to enlarge
Page 265
Lexmark MX710DHE — [x]-page jam, remove standard bin jam. [203] diagram (page 265)
Fig. 150 · [x]-page jam, remove standard bin jam. [203]
Lexmark MX710DHE — [x]-page jam, remove standard bin jam. [203] diagram (page 265)
Fig. 151 · [x]-page jam, remove standard bin jam. [203]

6 Insert the standard tray.

7 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, remove standard bin jam. [203]

1 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 265

Page 266 of the Lexmark MX710DHE user manual — [x] ‑ page jam, remove tray 1 to clear duplex. [235–239]
Page 266 · click to enlarge
Page 266
Lexmark MX710DHE — [x]-page jam, remove tray 1 to clear duplex. [235–239] diagram (page 266)
Fig. 152 · [x]-page jam, remove tray 1 to clear duplex. [235–23…
Lexmark MX710DHE — [x]-page jam, remove tray 1 to clear duplex. [235–239] diagram (page 266)
Fig. 153 · [x]-page jam, remove tray 1 to clear duplex. [235–23…

2 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, remove tray 1 to clear duplex. [235–239]

1 Pull out the tray completely.

Lexmark MX710DHE — [x] ‑ page jam, remove tray 1 to clear duplex. [235–239] diagram (page 266)
Fig. 154 · [x] ‑ page jam, remove tray 1 to clear duplex. [235–…

2 Push down the front duplex flap, then firmly grasp the jammed paper, and then gently pull the paper to the right and out of the printer.

Clearing jams 266

Page 267 of the Lexmark MX710DHE user manual — [x] ‑ page jam, open tray [x]. [24x]
Page 267 · click to enlarge
Page 267
Lexmark MX710DHE — [x]-page jam, open tray [x]. [24x] diagram (page 267)
Fig. 155 · [x]-page jam, open tray [x]. [24x]

3 Insert the tray.

4 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, open tray [x]. [24x]

1 Check which tray is indicated on the printer display, and then pull the tray.

Lexmark MX710DHE — [x] ‑ page jam, open tray [x]. [24x] diagram (page 267)
Fig. 156 · [x] ‑ page jam, open tray [x]. [24x]

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 267

Page 268 of the Lexmark MX710DHE user manual — [x] ‑ page jam, clear manual feeder. [250]
Page 268 · click to enlarge
Page 268

3 Insert the tray.

4 From the printer control panel, touch Done to clear the message and continue printing.

[x] ‑ page jam, clear manual feeder. [250]

1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MX710DHE — [x] ‑ page jam, clear manual feeder. [250] diagram (page 268)
Fig. 157 · [x] ‑ page jam, clear manual feeder. [250]

Clearing jams 268

Page 269 of the Lexmark MX710DHE user manual — [x]-page jam, clear manual feeder. [250]
Page 269 · click to enlarge
Page 269

2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MX710DHE — [x]-page jam, clear manual feeder. [250] diagram (page 269)
Fig. 158 · [x]-page jam, clear manual feeder. [250]

3 Reload paper into the multipurpose feeder.

4 Slide the paper guide until it rests lightly against the edge of the paper.

Lexmark MX710DHE — [x]-page jam, clear manual feeder. [250] diagram (page 269)
Fig. 159 · [x]-page jam, clear manual feeder. [250]

5 From the printer control panel, touch Done to clear the message and continue printing.

Clearing jams 269

Page 270 of the Lexmark MX710DHE user manual — [x] ‑ page jam, open automatic feeder top cover. [28y.xx]
Page 270 · click to enlarge
Page 270

[x] ‑ page jam, open automatic feeder top cover. [28y.xx]

1 Remove all original documents from the ADF tray.

2 Open the ADF cover.

Lexmark MX710DHE — [x] ‑ page jam, open automatic feeder top cover. [28y.xx] diagram (page 270)
Fig. 160 · [x] ‑ page jam, open automatic feeder top cover. [28…

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

4 Close the ADF cover.

5 Open the scanner cover.

6 If the jam is in the bottom ADF door or ADF exit bin, then open the bottom ADF door, and then firmly grasp the jammed paper on each side.

Clearing jams 270

Page 271 of the Lexmark MX710DHE user manual — [x]-page jam, open automatic feeder top cover. [28y.xx]
Page 271 · click to enlarge
Page 271

7 Close the bottom ADF door.

8 Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide.

9 From the printer control panel, touch Done to clear the message and continue printing.

Clearing jams 271

Page 272 of the Lexmark MX710DHE user manual — Change [paper source] to [paper size] load [orientation]
Page 272 · click to enlarge
Page 272

Troubleshooting

Understanding printer messages

Cartridge low [88.xy]

You may need to order a replacement toner cartridge. If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Cartridge nearly low [88.xy]

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, then specify the paper size and type in the Paper menu on the printer control panel, and then touch Finished changing paper .
  • Touch Reset active bin to reset the active tray for a linked set of trays.
  • Cancel the print job.

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, then specify the paper size and type in the Paper menu on the printer control panel, and then touch Finished changing paper .
  • Touch Reset active bin to reset the active tray for a linked set of trays.
  • Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, then specify the paper size and type in the Paper menu on the printer control panel, and then touch Finished changing paper .
  • Touch Reset active bin to reset the active tray for a linked set of trays.
  • Cancel the print job.

Troubleshooting 272

Page 273 of the Lexmark MX710DHE user manual — Close flatbed cover and load originals if restarting job [2yy.xx]
Page 273 · click to enlarge
Page 273

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, then specify the paper size and type in the Paper menu on the printer control panel, and then touch Finished changing paper .
  • Touch Reset active bin to reset the active tray for a linked set of trays.
  • Cancel the print job.

Check tray [x] connection

Try one or more of the following:

  • Turn off the printer, and then turn it back on.

If the error occurs a second time, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the indicated tray. 4 Reattach the tray. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.

If the error occurs again, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the tray. 4 Contact customer support. • From the printer control panel, touch Continue to clear the message and resume the job.

Close door or insert cartridge

The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers.

Close flatbed cover and load originals if restarting job [2yy.xx]

Try one or more of the following:

  • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Touch Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job.
  • Touch Finish job without further scanning to end the last successful scan job.

Troubleshooting 273

Page 274 of the Lexmark MX710DHE user manual — Disk full, scan job canceled
Page 274 · click to enlarge
Page 274

Close front door

Close the front door of the printer.

Close top access cover

Close the printer top access cover to clear the message.

Complex page, some data may not have printed [39]

Try one or more of the following:

  • From the printer control panel, touch Continue to ignore the message and continue printing.
  • Cancel current print job.
  • Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of the following possible changes in the printer:

  • The printer firmware has been updated.
  • The tray for the print job has been removed.
  • The print job is sent from a flash drive that is no longer attached to the USB port.
  • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, touch Continue to clear the message.

Defective flash detected [51]

Try one or more of the following:

  • Replace the defective flash memory card.
  • From the printer control panel, touch Continue to ignore the message and continue printing.
  • Cancel the current print job.

Disk full [62]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message and continue processing.
  • Delete fonts, macros, and other data stored in the printer hard disk.
  • Install a printer hard disk with larger capacity.

Disk full, scan job canceled

Try one or more of the following:

  • Touch Continue to clear the message and continue scanning.
  • Delete fonts, macros, and other data stored in the printer hard disk.

Troubleshooting 274

Page 275 of the Lexmark MX710DHE user manual — Fax memory full
Page 275 · click to enlarge
Page 275
  • Install a hard disk with higher capacity.

Disk must be formatted for use in this device

From the printer control panel, touch Format disk to format the printer hard disk and clear the message.

Disk near full. Securely clearing disk space.

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Delete fonts, macros, and other data stored on the printer hard disk.
  • Install a hard disk with higher capacity.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Fax memory full

From the printer control panel, touch Continue to clear the message.

Fax partition inoperative. Contact system administrator.

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Turn off the printer, and then turn it back on. If the message appears again, then contact your system support person.

Fax server 'To Format' not set up. Contact system administrator.

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Complete the Fax Server setup. If the message appears again, then contact your system support person.

Troubleshooting 275

Page 276 of the Lexmark MX710DHE user manual — Incorrect paper size, open [paper source] [34]
Page 276 · click to enlarge
Page 276

Fax Station Name not set up. Contact system administrator.

Try either of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Complete the Analog Fax setup. If the message appears again after completing the setup, then contact your system support person.

Fax Station Number not set up. Contact system administrator.

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Complete the Analog Fax setup. If the message appears again after completing the setup, then contact your system support person.

Imaging unit low [84.xy]

You may need to order a replacement imaging unit. If necessary, select Continue on the printer control panel to clear the message and continue printing.

Imaging unit nearly low [84.xy]

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Incompatible tray [x] [59]

Try one or more of the following:

  • Remove the indicated tray.
  • From the printer control panel, touch Continue to clear the message and continue printing without using the indicated tray.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, and then specify the paper size and type in the Paper menu on the printer control panel.
  • Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings.
  • Check if the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Check the length and width guides and make sure the paper is loaded properly in the tray.

Troubleshooting 276

Page 277 of the Lexmark MX710DHE user manual — Insufficient memory for Flash Memory Defragment operation [37]
Page 277 · click to enlarge
Page 277
  • From the printer control panel, touch Continue to clear the message and print using a different tray.
  • Cancel the print job.

Insert Tray [x]

Try one or more of the following:

  • Insert the specified tray into the printer.
  • Cancel the print job.
  • Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.

Install duplex

Try one or more of the following:

  • Install the duplex unit: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the duplex unit. 4 Connect the power cord to a properly grounded electrical outlet. 5 Restart the printer.
  • Cancel the current job.
  • Reset the active bin.

Install Tray [x]

Try one or more of the following:

  • Install the specified tray: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.
  • Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

  • From the printer control panel, touch Continue to stop the defragmentation and continue printing.
  • Delete fonts, macros, and other data in the printer memory.
  • Install additional printer memory.

Troubleshooting 277

Page 278 of the Lexmark MX710DHE user manual — Load [paper source] with [custom type name] [paper orientation]
Page 278 · click to enlarge
Page 278

Insufficient memory to collate job [37]

Try one or more of the following:

  • From the printer control panel, touch Continue to print the part of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.

Insufficient memory, some Held Jobs were deleted [37]

From the printer control panel, touch Continue to clear the message.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Delete other held jobs to free up additional printer memory.

Load [paper source] with [custom string] [paper orientation]

Try one or more of the following:

  • Load the indicated tray or feeder with the correct size and type of paper.
  • To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.

Load [paper source] with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.

Troubleshooting 278

Page 279 of the Lexmark MX710DHE user manual — Load Manual Feeder with [custom type name] [paper orientation]
Page 279 · click to enlarge
Page 279

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:

  • Load the specified tray or feeder with the correct size of paper.
  • To use the tray or feeder with the correct size of paper, touch Finished loading paper on the printer control panel.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the specified tray or feeder with the correct size and type of paper.
  • To use the tray or feeder with the correct size and type of paper, touch Finished loading paper on the printer control panel.

Load Manual Feeder with [custom string] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Troubleshooting 279

Page 280 of the Lexmark MX710DHE user manual — Memory full, cannot print faxes
Page 280 · click to enlarge
Page 280

Load Manual Feeder with [paper size] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size of paper.
  • From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Maintenance kit nearly low [80.xy]

For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, touch Continue to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

  • From the printer control panel, touch Cancel job to clear the message.
  • Install additional printer memory.

Memory full, cannot print faxes

From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt to print after the printer is restarted.

Troubleshooting 280

Page 281 of the Lexmark MX710DHE user manual — Not enough free space in flash memory for resources [52]
Page 281 · click to enlarge
Page 281

Memory full, cannot send faxes

1 From the printer control panel, touch Continue to clear the message and cancel the fax job.

  • 2 Try one or more of the following:
  • Reduce the fax resolution, and then resend the fax job.
  • Reduce the number of pages in the fax, and then resend the fax job.

Network [x] software error [54]

Try one or more of the following:

  • From the printer control panel, touch Continue to continue printing.
  • Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or print server. For more information, contact customer support.

No analog phone line connected to modem, fax is disabled.

Connect the printer to an analog phone line.

Non ‑ Lexmark [supply type], see User’s Guide [33.xy]

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, touch

and the # on the printer control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer, and then install a genuine Lexmark supply or part.

Not enough free space in flash memory for resources [52]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message and continue printing.
  • Delete fonts, macros, and other data stored in the flash memory.

Troubleshooting 281 · and hold

Page 282 of the Lexmark MX710DHE user manual — Reinstall missing or unresponsive imaging unit [31.xy]
Page 282 · click to enlarge
Page 282
  • Install a flash memory card with larger capacity.

Paper changes needed

Try one or more of the following:

  • Touch Use current supplies to clear the message and continue printing.
  • Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Enable the parallel port. From the printer control panel, navigate to:

Network/Ports > Parallel [x] > Parallel Buffer > Auto

Printer had to restart. Last job may be incomplete.

From the printer control panel, touch Continue to clear the message and continue printing.

For more information, visit http://support.lexmark.com or contact customer support.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

  • Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide. • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Troubleshooting 282

Page 283 of the Lexmark MX710DHE user manual — Printer and toner cartridge regions
Page 283 · click to enlarge
Page 283

Remove defective disk [61]

Remove and replace the defective printer hard disk.

Remove packaging material, [area name]

Remove any remaining packaging material from the specified location.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace all originals if restarting job.

Try one or more of the following:

  • Touch Cancel job to clear the message and cancel the scan job.
  • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
  • Touch Finish job without further scanning to end the last successful scan job.
  • Touch Restart job to restart the scan job with the same settings from the previous scan job.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

Printer and toner cartridge regions

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

Show 5 more labels / short text on this page
Troubleshooting 283 · Region number Region · 0 Global · 4 Latin America · 9 Invalid
Page 284 of the Lexmark MX710DHE user manual — Replace missing fuser [80.xx]
Page 284 · click to enlarge
Page 284
  • The x and y values represent . xy in the code that appears on the printer control panel.
  • The x and y values must match for printing to continue.

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace jammed originals if restarting job.

Try one or more of the following:

  • Touch Cancel job to clear the message and cancel the scan job.
  • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
  • Touch Finish job without further scanning to end the last successful scan job.
  • Touch Restart job to restart the scan job with the same settings from the previous scan job.

Replace last scanned page and jammed originals if restarting job.

Try one or more of the following:

  • Touch Cancel job to clear the message and cancel the scan job.
  • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
  • Touch Finish job without further scanning to end the last successful scan job.
  • Touch Restart job to restart the scan job with the same settings from the previous scan job.

Replace maintenance kit, 0 estimated pages remain [80.xy]

Contact customer support at http://support.lexmark.com or your service representative, and then report the message. The printer is scheduled for maintenance.

Replace missing fuser [80.xx]

1 Install the missing fuser. For more information, see the instruction sheet that came with the replacement part.

2 From the printer control panel, touch Continue to clear the message.

Troubleshooting 284

Page 285 of the Lexmark MX710DHE user manual — Scan document too long
Page 285 · click to enlarge
Page 285

Replace roller kit [81.xx]

Try one or more of the following:

  • Replace the roller kit. For more information, see the instruction sheet that came with the part.
  • From the printer control panel, select Continue to clear the message and continue printing.

Replace separator pad

Try one or more of the following:

  • Replace the separator pad. For more information, see the instruction sheet that came with the supply.
  • From the printer control panel, touch Ignore to clear the message.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace wiper

Try one or more of the following:

  • Replace the fuser wiper in the printer.
  • Touch Continue to clear the message and continue printing.

Restore held jobs?

Try one or more of the following:

  • From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
  • From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.

Scan document too long

The scan job exceeds the maximum number of pages. Touch Cancel job to clear the message and cancel the scan job.

Troubleshooting 285

Page 286 of the Lexmark MX710DHE user manual — Serial port [x] disabled [56]
Page 286 · click to enlarge
Page 286

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.

Scanner disabled. Contact system administrator if problem persists. [840.02]

Try one or more of the following:

  • Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
  • Touch Reboot and automatically enable scanner to cancel the job.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner maintenance required soon, use ADF Kit [80]

Contact customer support, and then report the message. The printer is scheduled for maintenance.

Serial option [x] error [54]

Try one or more of the following:

  • From the printer control panel, touch Continue to continue printing.
  • Check that the serial cable is properly connected and is the correct one for the serial port.
  • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and computer.
  • Turn off the printer, and then turn it back on.

Serial port [x] disabled [56]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • The printer discards any data received through the specified serial port.
  • Make sure Serial Buffer is not set to Disabled.
  • From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu.

Troubleshooting 286

Page 287 of the Lexmark MX710DHE user manual — Too many flash options installed [58]
Page 287 · click to enlarge
Page 287

Some held jobs were not restored

From the printer control panel, touch Continue to delete the indicated job.

Standard network software error [54]

Try one or more of the following:

  • From the printer control panel, touch Continue to continue printing.
  • Turn off the printer, and then turn it back on.
  • Update the network firmware in the printer or print server. For more information, contact customer support.

Standard USB port disabled [56]

Try one or more of the following:

  • From the printer control panel, touch Continue to clear the message.
  • Enable the USB port. From the printer control panel, navigate to:

Network/Ports > USB Buffer > Auto

Supply needed to complete job

Do either of the following:

  • Install the missing supply to complete the job.
  • Cancel the current job.

Too many disks installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra printer hard disks.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many flash options installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Troubleshooting 287

Page 288 of the Lexmark MX710DHE user manual — USB port [x] disabled [56]
Page 288 · click to enlarge
Page 288

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Tray [x] paper size unsupported

Replace with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

  • From the printer control panel, touch Continue to stop the defragmentation and continue printing.
  • Format the flash memory.

Unsupported camera mode, unplug camera and change mode

The camera mode does not support PictBridge.

Unplug the camera, change the mode and plug the camera back into the printer.

Unsupported disk

Remove the unsupported printer hard disk, and then insert a supported one.

Unsupported option in slot [x] [55]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

USB port [x] disabled [56]

From the printer control panel, touch Continue to clear the message.

  • The printer discards any data received through the USB port.

Troubleshooting 288

Page 289 of the Lexmark MX710DHE user manual — The printer is not responding
Page 289 · click to enlarge
Page 289
  • Make sure the USB Buffer menu is not set to Disabled.

Weblink server not set up. Contact system administrator.

From the printer control panel, touch Continue to clear the message.

Solving printer problems

  • “Basic printer problems” on page 289
  • “Hardware and internal option problems” on page 291
  • “Paper feed problems” on page 294

Basic printer problems

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Show 6 more labels / short text on this page
Troubleshooting 289 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 290 of the Lexmark MX710DHE user manual — Weblink server not set up. Contact system administrator.
Page 290 · click to enlarge
Page 290

Go to step 6. Make sure to match the following:

Check if the cables connecting the printer and the computer are inserted in the correct ports.

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Step 6 Make sure the electrical outlet is not turned off by a switch or breaker.

Turn on the switch or reset the breaker.

Go to step 7.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Step 8 Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Go to step 11. Use correct printer driver settings.

Check if you have selected the correct port settings in the printer driver.

Are the port settings correct?

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Show 8 more labels / short text on this page
Troubleshooting 290 · Action Yes No · Step 5 · Step 7 · Step 9 · Step 10 · Step 11 · Step 12
Page 291 of the Lexmark MX710DHE user manual — Cannot detect internal option
Page 291 · click to enlarge
Page 291

Printer display is blank

The problem is solved. Go to step 2.

Press the Sleep button on the printer control panel.

Does Ready appear on the printer display?

The problem is solved. Turn off the printer, and then contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Do Please wait and Ready appear on the printer display?

Hardware and internal option problems

Cannot detect internal option

The problem is solved. Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?

Go to step 3. Connect the internal option to the controller board.

Check if the internal option is properly installed in the controller board.

a Turn off the printer using the power switch, and then unplug the power

cord from the electrical outlet. b Make sure the internal option is installed in the appropriate connector

in the controller board. c Connect the power cord to the printer, then to a properly grounded

electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

Show 8 more labels / short text on this page
Troubleshooting 291 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 292 of the Lexmark MX710DHE user manual — Internal Solutions Port does not operate correctly
Page 292 · click to enlarge
Page 292

The problem is solved. Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 55. b Resend the print job.

Does the internal option operate correctly?

Internal print server does not operate correctly

Go to step 2. Check if the internal print server is supported by the printer.

Reinstall the internal print server.

a Remove, and then install the internal print server. For more

information, see “Installing an Internal Solutions Port” on page 36. b Print a menu settings page, and then check if the internal print server

is listed in the Installed Features list.

Is the internal print server listed in the Installed Features list?

The problem is solved. Contact customer support.

Check the cable and the internal print server connection.

Use the correct cable, and then check if it is securely connected to the internal print server.

Does the internal print server operate correctly?

Internal Solutions Port does not operate correctly

Go to step 2. Check if you have a supported ISP.

Make sure the Internal Solutions Port (ISP) is installed.

a Install the ISP. For more information, see “Installing an Internal

Solutions Port” on page 36. b Print a menu settings page, and then check if the ISP is listed in the

Installed Features list.

Is the ISP listed in the Installed Features list?

Show 8 more labels / short text on this page
Troubleshooting 292 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 293 of the Lexmark MX710DHE user manual — Tray problems
Page 293 · click to enlarge
Page 293

The problem is solved. Contact customer support.

Check the cable and the ISP connection.

a Use the correct cable, and then make sure it is securely connected to

the ISP. b Check if the ISP solution interface cable is securely connected into the

receptacle of the controller board.

Does the Internal Solutions Port operate correctly?

Tray problems

The problem is solved. Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved. Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn the

printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed and recognized by the printer.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

Show 7 more labels / short text on this page
Troubleshooting 293 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 294 of the Lexmark MX710DHE user manual — Jammed pages are not reprinted
Page 294 · click to enlarge
Page 294

The problem is solved. Contact customer support.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

USB/parallel interface card does not operate correctly

Go to step 2. Check if you have a supported USB or parallel interface card.

Make sure the USB or parallel interface card is installed.

a Install the USB or parallel interface card. For more information, see

“Installing an Internal Solutions Port” on page 36. b Print a menu settings page, and then check if the USB or parallel

interface card is listed in the Installed Features list.

Is the USB or parallel interface card listed in the Installed Features list?

The problem is solved. Contact customer support.

Check the cable and the USB or parallel interface card connection.

Use the correct cable, and then make sure it is securely connected to the USB or parallel interface card.

Does the USB or parallel interface card operate correctly?

Paper feed problems

Jammed pages are not reprinted

Turn on Jam Recovery.

The problem is solved. Contact customer support.

a From the home screen, navigate to:

> Settings > General Settings > Print Recovery b From the Jam Recovery menu, touch the arrows to scroll to On or

Auto. c Touch Submit.

Do pages reprint after a jam?

Show 7 more labels / short text on this page
Troubleshooting 294 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 295 of the Lexmark MX710DHE user manual — Paper jam message remains after jam is cleared
Page 295 · click to enlarge
Page 295

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see “Avoiding

jams” on page 256. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

Check the entire paper path for jammed paper.

Contact customer support.

The problem is solved.

a Remove any jammed paper. b From the printer control panel, touch Continue to clear the message.

Does the paper jam message remain?

Show 6 more labels / short text on this page
Troubleshooting 295 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 296 of the Lexmark MX710DHE user manual — Confidential and other held jobs do not print
Page 296 · click to enlarge
Page 296

Solving print problems

Printing problems

Confidential and other held jobs do not print

Go to step 2. Select one of the Print and Hold options, and then resend the print job. For more information, see “Printing confidential and other held jobs” on page 97.

Open the held jobs folder on the printer display, and then verify that your print job is listed.

Is your print job listed in the held jobs folder?

Step 2 The print job may contain a formatting error or invalid data.

The problem is solved. Go to step 3.

  • Delete the print job, and then send it again.
  • For PDF files, generate a new PDF, and then print it again.

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.

a Open the Print Properties folder. b From the Print and Hold dialog, select the “Keep duplicate documents”

check box. c Enter a PIN number.

For Macintosh users Save each print job, name each job differently, and then send the individual jobs to the printer.

Does the job print?

The problem is solved. Add additional printer memory.

Free up additional printer memory by deleting some of the held jobs.

Does the job print?

Show 5 more labels / short text on this page
Troubleshooting 296 · Action Yes No · Step 1 · For Windows users · Step 3
Page 297 of the Lexmark MX710DHE user manual — Error message about reading the flash drive appears
Page 297 · click to enlarge
Page 297

Envelope seals when printing

a Use envelopes that have been stored in a dry environment.

Contact customer support.

The problem is solved.

Does the envelope seal when printing?

Error message about reading the flash drive appears

Go to step 2. Insert the flash drive into the front USB port.

Check if the flash drive is inserted into the front USB port.

Is the flash drive inserted into the front USB port?

Wait until the printer is ready, then view the held jobs list, and then print the documents.

Go to step 3.

Check if the indicator light on the printer control panel is blinking green.

Is the indicator light blinking green?

Go to step 4. The problem is solved.

a Check for an error message on the display. b Clear the message.

Does the error message still appear?

Step 4 Check if the flash drive is supported.

Go to step 5. The problem is solved.

For more information on tested and approved USB flash drives, see “Supported flash drives and file types” on page 95.

Does the error message still appear?

Contact customer support.

The problem is solved.

Check if the USB port is disabled by the system support person.

Does the error message still appear?

Show 7 more labels / short text on this page
Troubleshooting 297 · Action Yes No · Action Yes No · Step 1 · Step 2 · Step 3 · Step 5
Page 298 of the Lexmark MX710DHE user manual — Job prints from the wrong tray or on the wrong paper
Page 298 · click to enlarge
Page 298

Incorrect characters print

Deactivate Hex Trace mode.

Go to step 2.

Make sure the printer is not in Hex Trace mode.

Is the printer in Hex Trace mode?

Contact customer support.

The problem is solved.

a From the printer control panel, select Standard Network or

Network [x], and then set SmartSwitch to On. b Resend the print job.

Do incorrect characters print?

Job prints from the wrong tray or on the wrong paper

The problem is solved. Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 3.

a From the Paper menu on the printer control panel, set the paper size

and type to match the paper loaded in the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 4.

a Depending on your operating system, open Printing Preferences or

the Print dialog, and then specify the paper type. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Contact customer support.

a Check if the trays are not linked. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Show 9 more labels / short text on this page
Troubleshooting 298 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 299 of the Lexmark MX710DHE user manual — Large jobs do not collate
Page 299 · click to enlarge
Page 299

Large jobs do not collate

The problem is solved. Go to step 2.

a From the Finishing menu on the printer control panel, set Collate to

(1,2,3) (1,2,3). b Resend the print job.

Did the job print and collate correctly?

The problem is solved. Go to step 3.

a From the printer software, set Collate to (1,2,3) (1,2,3).

Did the job print and collate correctly?

The problem is solved. Contact customer support.

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Did the job print and collate correctly?

Multiple‑language PDF files do not print

The problem is solved. Go to step 2.

a Check if the print options for the PDF output are set to embed all fonts.

For more information, see the documentation that came with Adobe Acrobat. b Generate a new PDF file, and then resend the print job.

Do the files print?

The problem is solved. Contact customer support.

a Open the document you want to print in Adobe Acrobat. b Click File > Print > Advanced > Print As Image > OK > OK.

Do the files print?

Show 8 more labels / short text on this page
Troubleshooting 299 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 300 of the Lexmark MX710DHE user manual — Print jobs do not print
Page 300 · click to enlarge
Page 300

Print jobs do not print

The problem is solved. Go to step 2.

a From the document you are trying to print, open the Print dialog and

check if you have selected the correct printer.

Do the jobs print?

The problem is solved. Go to step 3.

a Check if the printer is plugged in and turned on, and if Ready appears

on the printer display. b Resend the print job.

Do the jobs print?

Step 3 If an error message appears on the printer display, then clear the message.

The problem is solved. Go to step 4.

Do the jobs print?

The problem is solved. Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if the

cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved. Go to step 6.

a Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

The problem is solved. Contact customer support.

a Remove, and then reinstall the printer software. For more

information, see “Installing the printer software” on page 54.

Do the jobs print?

Show 7 more labels / short text on this page
Troubleshooting 300 · Action Yes No · Step 1 · Step 2 · Step 4 · Step 5 · Step 6
Page 301 of the Lexmark MX710DHE user manual — Print job takes longer than expected
Page 301 · click to enlarge
Page 301

Print job takes longer than expected

The problem is solved. Go to step 2.

Change the environmental settings of the printer.

a From the printer control panel, navigate to:

Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off.

Did the job print?

The problem is solved. Go to step 3.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the job

Did the job print?

The problem is solved. Go to step 4.

a Remove held jobs stored in the printer memory. b Resend the print job.

Did the job print?

The problem is solved. Go to step 5.

a Disable the Page Protect feature.

From the printer control panel, navigate to: Settings > General Settings > Print Recovery > Page Protect > Off b Resend the print job.

Did the job print?

The problem is solved. Go to step 6.

a Check if the cable connections to the printer and print server are

secure. For more information, see the setup documentation that came with the printer. b Resend the print job.

Did the job print?

The problem is solved. Contact customer support.

Install additional printer memory, and then resend the print job.

Did the job print?

Show 8 more labels / short text on this page
Troubleshooting 301 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 302 of the Lexmark MX710DHE user manual — Tray linking does not work
Page 302 · click to enlarge
Page 302

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.

The problem is solved. Go to step 2.

a Make sure the size of the paper loaded in the tray matches the fuser

type.

Does the print speed increase?

The problem is solved. Contact customer support.

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Does the print speed increase?

Tray linking does not work

  • The trays can detect paper length.
  • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu.

The problem is solved. Go to step 2.

a Open the trays, and then check if they contain paper of the same size

and type.

  • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. b Resend the print job.

Do the trays link correctly?

Show 6 more labels / short text on this page
Troubleshooting 302 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 303 of the Lexmark MX710DHE user manual — Unexpected page breaks occur
Page 303 · click to enlarge
Page 303

The problem is solved. Contact customer support.

a From the printer control panel, set the paper size and type in the Paper

menu to match the paper loaded in the trays to be linked.

Do the trays link correctly?

Unexpected page breaks occur

Increase the printing timeout.

The problem is solved. Check the original file for manual page breaks.

a From the home screen, navigate to:

> Settings > General Settings > Timeouts b Increase the Print Timeout setting, and then touch Submit.

c Resend the print job.

Did the file print correctly?

Show 4 more labels / short text on this page
Troubleshooting 303 · Action Yes No · Step 2 · Action Yes No
Page 304 of the Lexmark MX710DHE user manual — Characters have jagged or uneven edges
Page 304 · click to enlarge
Page 304

Print quality problems

Characters have jagged or uneven edges

Go to step 2. The problem is solved.

a Print a font sample list to check if the fonts you are using are supported

by the printer.

1 From the printer control panel, navigate to:

> Reports > Print Fonts 2 Touch PCL Fonts or PostScript Fonts. b Use a font that is supported by the printer or install the font that you

want to use. For more information, contact your system support person. c Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Contact customer support.

The problem is solved.

a Use a font that is supported by the printer or install the font that you

want to use on your computer. For more information, contact your system support person. b Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Show 4 more labels / short text on this page
Troubleshooting 304 · Action Yes No · Step 1 · Step 2
Page 305 of the Lexmark MX710DHE user manual — Clipped pages or images
Page 305 · click to enlarge
Page 305

Clipped pages or images

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the paper loaded. b Resend the print job.

Is the page or image clipped?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Do the paper size and type match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Show 8 more labels / short text on this page
Troubleshooting 305 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 306 of the Lexmark MX710DHE user manual — Gray background on prints
Page 306 · click to enlarge
Page 306

Compressed images appear on prints

Lexmark MX710DHE — Compressed images appear on prints diagram (page 306)
Fig. 161 · Compressed images appear on prints

a Make sure the size of the paper loaded in the tray matches the fuser

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Gray background on prints

Lexmark MX710DHE — Gray background on prints diagram (page 306)
Fig. 162 · Gray background on prints

a From the Quality Menu on the printer control panel, decrease the

Troubleshooting 306

Page 307 of the Lexmark MX710DHE user manual — Horizontal voids appear on prints
Page 307 · click to enlarge
Page 307
Lexmark MX710DHE — Horizontal voids appear on prints diagram (page 307)
Fig. 163 · Horizontal voids appear on prints

a Remove the toner cartridge. b Remove the imaging unit.

Replace the imaging unit, and then resend the print job.

Horizontal voids appear on prints

Lexmark MX710DHE — Horizontal voids appear on prints diagram (page 307)
Fig. 164 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Troubleshooting 307

Page 308 of the Lexmark MX710DHE user manual — Incorrect margins on prints
Page 308 · click to enlarge
Page 308

Go to step 4. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do horizontal voids appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do horizontal voids appear on prints?

Incorrect margins on prints

ABCD ABCD ABCD

The problem is solved. Go to step 2.

a Move the width and length guides in the tray to the correct positions

for the paper size loaded. b Resend the print job.

Are the margins correct?

Step 2 From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray.

Go to step 3. Do one or more of the following:

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Does the paper size match the paper loaded in the tray?

Show 6 more labels / short text on this page
Troubleshooting 308 · Action Yes No · Step 3 · Step 4 · Action Yes No · Step 1
Page 309 of the Lexmark MX710DHE user manual — Paper curl
Page 309 · click to enlarge
Page 309

The problem is solved. Contact customer support.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the paper still curled?

Go to step 5. The problem is solved.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Show 9 more labels / short text on this page
Troubleshooting 309 · Action Yes No · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 310 of the Lexmark MX710DHE user manual — Printer is printing blank pages
Page 310 · click to enlarge
Page 310

Printer is printing blank pages

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer still printing blank pages?

Show 5 more labels / short text on this page
Troubleshooting 310 · Action Yes No · Step 1 · Step 2 · Step 3
Page 311 of the Lexmark MX710DHE user manual — Print irregularities
Page 311 · click to enlarge
Page 311

Printer is printing solid black pages

Lexmark MX710DHE — Printer is printing solid black pages diagram (page 311)
Fig. 165 · Printer is printing solid black pages

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Print irregularities

Lexmark MX710DHE — Print irregularities diagram (page 311)
Fig. 166 · Print irregularities

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded in the tray. b Resend the print job.

Troubleshooting 311

Page 312 of the Lexmark MX710DHE user manual — Printer is printing solid black pages
Page 312 · click to enlarge
Page 312

Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do print irregularities still appear?

From the printer control panel, set the paper texture in the Paper menu to match the paper loaded in the tray.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do print irregularities still appear?

Show 7 more labels / short text on this page
Troubleshooting 312 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 313 of the Lexmark MX710DHE user manual — Print is too dark
Page 313 · click to enlarge
Page 313

Print is too dark

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, reduce the toner

darkness.

Is the print still too dark?

Go to step 3. Do one or more of the following:

a From the printer control panel, set the paper type, texture and weight

in the Paper menu to match the paper loaded in the tray. b Resend the print job.

  • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper type, texture and weight specified in the tray settings.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too dark?

Step 4 Check if the paper loaded in the tray has texture or rough finishes.

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Are you printing on textured or rough paper?

Show 5 more labels / short text on this page
Troubleshooting 313 · Action Yes No · Step 1 · Step 2 · Step 3
Page 314 of the Lexmark MX710DHE user manual — Print is too light
Page 314 · click to enlarge
Page 314

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Print is too light

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, increase the toner

darkness.

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too light?

Show 8 more labels / short text on this page
Troubleshooting 314 · Action Yes No · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3
Page 315 of the Lexmark MX710DHE user manual — Print is too light
Page 315 · click to enlarge
Page 315

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Go to step 7. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Show 6 more labels / short text on this page
Troubleshooting 315 · Action Yes No · Step 4 · Step 5 · Step 6 · Step 7
Page 316 of the Lexmark MX710DHE user manual — Repeating defects appear on prints
Page 316 · click to enlarge
Page 316

Repeating defects appear on prints

Go to step 2. The problem is solved.

a Replace the imaging unit if the distance between the defects is equal

to any of the following:

  • 47.8 mm (1.88 in.)
  • 96.8 mm (3.81 in.)
  • 28.5 mm (1.12 in.) b Resend the print job.

Do repeating defects still appear on prints?

Contact customer support.

The problem is solved.

a Replace the fuser if the distance between the defects is equal to either

of the following:

  • 94.25 mm (3.71 in.)
  • 95.2 mm (3.75 in.) b Resend the print job.

Do repeating defects still appear on prints?

Show 4 more labels / short text on this page
Troubleshooting 316 · Action Yes No · Step 1 · Step 2
Page 317 of the Lexmark MX710DHE user manual — ABCD ABCD ABCD ABCD
Page 317 · click to enlarge
Page 317

Shadow images appear on prints

Lexmark MX710DHE — Shadow images appear on prints diagram (page 317)
Fig. 167 · Shadow images appear on prints

ABCD

Go to step 2. Load paper with the correct paper type and weight in the tray.

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do shadow images still appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 317 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 318 of the Lexmark MX710DHE user manual — Streaked horizontal lines appear on prints
Page 318 · click to enlarge
Page 318

Skewed print

) ) ABCDE

ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the tray. b Resend the print job.

Is the print still skewed?

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder from

Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Show 7 more labels / short text on this page
Troubleshooting 318 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 319 of the Lexmark MX710DHE user manual — Streaked vertical lines appear on prints
Page 319 · click to enlarge
Page 319
Lexmark MX710DHE — Streaked vertical lines appear on prints diagram (page 319)
Fig. 168 · Streaked vertical lines appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Streaked vertical lines appear on prints

Lexmark MX710DHE — Streaked vertical lines appear on prints diagram (page 319)
Fig. 169 · Streaked vertical lines appear on prints

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Troubleshooting 319

Page 320 of the Lexmark MX710DHE user manual — Streaked vertical lines appear on prints
Page 320 · click to enlarge
Page 320

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper texture, type, and weight in the Paper menu to match the paper loaded in the tray.

  • Specify the paper texture, type, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper texture, type, and weight specified in the tray settings.

Do the paper texture, type, and weight match the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked vertical lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked vertical lines appear on prints?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do streaked vertical lines appear on prints?

Show 6 more labels / short text on this page
Troubleshooting 320 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5
Page 321 of the Lexmark MX710DHE user manual — Toner rubs off
Page 321 · click to enlarge
Page 321

Toner fog or background shading appears on prints

Lexmark MX710DHE — Toner fog or background shading appears on prints diagram (page 321)
Fig. 170 · Toner fog or background shading appears on prints

a Remove, and then install the imaging unit. b Resend the print job.

Contact customer support at http://support.lexmar k.com or your service representative.

Replace the imaging unit, and then resend the print job.

Toner rubs off

Lexmark MX710DHE — Toner rubs off diagram (page 321)
Fig. 171 · Toner rubs off

Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the Paper menu on the printer control panel, check the paper type and weight.

Do the paper type and weight match the paper loaded in the tray?

From the Paper menu on the printer control panel, set the paper texture.

Check if you are printing on paper that is heavy or has texture or rough finishes.

Troubleshooting 321

Page 322 of the Lexmark MX710DHE user manual — Uneven print density
Page 322 · click to enlarge
Page 322

Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Do toner specks appear on prints?

Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

Contact customer support.

The problem is solved.

a Check if you are using a recommended type of transparency. b Resend the print job.

Is the print quality still poor?

Uneven print density

Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Is the print density uneven?

Show 6 more labels / short text on this page
Troubleshooting 322 · Action Yes No · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 323 of the Lexmark MX710DHE user manual — Vertical voids appear on prints
Page 323 · click to enlarge
Page 323

Vertical voids appear on prints

Go to step 2. The problem is solved.

a Make sure your software program is using a correct fill pattern. b Resend the print job.

Do vertical voids appear on prints?

Go to step 3. The problem is solved.

a From the printer control panel, set the paper type and weight in the

Paper menu to match the paper loaded in the tray. b Resend the print job.

Do vertical voids appear on prints?

Step 3 Check if you are using a recommended type of paper.

Go to step 4. The problem is solved.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Do vertical voids appear on prints?

Go to step 5. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do vertical voids appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 323 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 4 · Step 5
Page 324 of the Lexmark MX710DHE user manual — Partial document or photo copies
Page 324 · click to enlarge
Page 324

Solving copy problems

  • “Copier does not respond” on page 324
  • “Partial document or photo copies” on page 324
  • “Poor copy quality” on page 325
  • “Scanner unit does not close” on page 326

Copier does not respond

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Does an error or status message appear?

Go to step 3. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn it back on.

Did Performing Self Test and Ready appear?

Partial document or photo copies

Go to step 2. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 3. Change the paper size setting to match the paper loaded in the tray, or load the tray with paper that matches the paper size setting.

Check if the paper size setting matches the size of the paper loaded in the tray.

From the Paper menu on the printer control panel, check the Paper Size setting.

Does the paper size setting match the size of the paper loaded in the tray.

Show 8 more labels / short text on this page
Troubleshooting 324 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 325 of the Lexmark MX710DHE user manual — Poor copy quality
Page 325 · click to enlarge
Page 325

The problem is solved. Contact customer support.

a Specify the paper size. Depending on your operating system, specify

the paper size in Printing Preferences or the Print dialog. b Resend the print job.

Do copies print properly?

Poor copy quality

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Does an error or status message appear?

Go to step 3. Increase the scan resolution setting for a higher‑quality output.

Check the quality of the original document.

Is the quality of the original document satisfactory?

Go to step 4. See “Cleaning the scanner glass” on page 239.

If dark marks appear on prints, then clean the scanner glass and the ADF glass using a clean, lint-free cloth dampened with water.

Is the scanner glass clean?

Go to step 5. See “Print quality problems” on page 304.

Send a print job, and then check for print quality problems.

a From the General Settings menu, adjust the Eco‑Mode settings. b From the Copy menu, adjust the Darkness setting.

c If the print remains faded, then replace the toner cartridge.

Is the print quality satisfactory?

Go to step 6. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 7. Change the Content Type and Content Source settings to match the document being scanned.

Check the copy settings.

From the Copy screen, check if the Content Type and Content Source settings are correct for the document being scanned.

Are the Content Type and Content Source settings correct for the document being scanned?

Show 10 more labels / short text on this page
Troubleshooting 325 · Action Yes No · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 326 of the Lexmark MX710DHE user manual — Scanner unit does not close
Page 326 · click to enlarge
Page 326

Go to step 8. The problem is solved.

Check for patterns on prints.

a From the Copy screen, navigate to:

Advanced Options > Advanced Imaging > Sharpness > select a lower setting

Do patterns appear on prints?

Go to step 9. The problem is solved.

Check for missing or faded text on prints.

a From the Copy screen, navigate to:

Advanced Options > Advanced Imaging b Adjust the settings:

  • Sharpness —Increase the current setting.
  • Contrast —Increase the current setting. c Resend the copy job.

Do prints have missing or faded text?

Contact customer support.

The problem is solved.

Check for washed‑out or overexposed output.

a From the Copy screen, navigate to:

Advanced Options > Advanced Imaging b Adjust the settings of the following:

  • Background Removal —Reduce the current setting.
  • Shadow Detail —Reduce the current setting. c Resend the copy job.

Do pages show washed‑out or overexposed prints?

Scanner unit does not close

Check if there are no obstructions between the scanner unit and the printer.

The problem is solved. Contact customer support.

a Lift the scanner unit. b Remove any obstruction that keeps the scanner unit open.

c Lower the scanner unit.

Did the scanner unit close properly?

Show 6 more labels / short text on this page
Troubleshooting 326 · Action Yes No · Step 7 · Step 8 · Step 9 · Action Yes No
Page 327 of the Lexmark MX710DHE user manual — Cannot send or receive a fax
Page 327 · click to enlarge
Page 327

Solving fax problems

  • “Caller ID is not shown” on page 327
  • “Cannot send or receive a fax” on page 327
  • “Can receive but not send faxes” on page 330
  • “Can send but not receive faxes” on page 330
  • “Fax and e-mail functions are not set up” on page 331
  • “Received fax has poor print quality” on page 332

Caller ID is not shown

Contact your telephone company to check if your telephone line is subscribed to the caller ID service.

The problem is solved. Contact customer support.

  • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2).
  • The availability of these settings in the Fax menu depends on whether your country or region supports multiple caller ID patterns.
  • Contact your telephone company to determine which pattern or switch setting to use.

Does the caller ID appear?

Cannot send or receive a fax

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Is there an error or status message on the display?

Go to step 3. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Show 5 more labels / short text on this page
Troubleshooting 327 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 328 of the Lexmark MX710DHE user manual — Solving fax problems
Page 328 · click to enlarge
Page 328

Go to step 4. Turn on the printer, and then wait until Ready appears on the display.

Check the power.

Check if the printer is plugged in and turned on, and if Ready appears on the display.

Is the printer turned on, and does Ready appear on the display?

Go to step 5. Securely connect the cables.

Check the printer connections.

If applicable, check if the cable connections for the following equipment are secure:

  • Telephone
  • Handset
  • Answering machine

Are the cable connections secure?

The problem is solved. Go to step 6.

a Check the telephone wall jack.

1 Plug the telephone cable into the wall jack. 2 Listen for a dial tone. 3 If you do not hear a dial tone, then plug a different telephone cable into the wall jack. 4 If you still do not hear a dial tone, then plug the telephone cable into a different wall jack. 5 If you hear a dial tone, then connect the printer to that wall jack. b Try sending or receiving a fax.

Can you send or receive a fax?

Go to step 7. Connect the printer to an analog phone service or the correct digital connector.

Check if the printer is connected to an analog phone service or the correct digital connector.

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.

  • If you are using an ISDN telephone service, then connect the printer to an analog telephone port (an R-interface port) on an ISDN terminal adapter. For more information and to request an Rinterface port, contact your ISDN provider.
  • If you are using DSL, then connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider.
  • If you are using a PBX telephone service, then make sure you are connecting to an analog connection on the PBX. If none exists, then consider installing an analog telephone line for the fax machine.

Is the printer connected to an analog phone service or the correct digital connector?

Show 6 more labels / short text on this page
Troubleshooting 328 · Action Yes No · Step 3 · Step 4 · Step 5 · Step 6
Page 329 of the Lexmark MX710DHE user manual — Solving fax problems
Page 329 · click to enlarge
Page 329
  • Go to step 8.
  • Try calling the fax number to make sure that it is working properly.
  • If the telephone line is being used by another device, then wait until the other device is finished before sending a fax.
  • If you are using the On Hook Dial feature, then turn up the volume to check if you hear a dial tone.

Check for a dial tone.

Did you hear a dial tone?

The problem is solved. Go to step 9.

Temporarily disconnect other equipment (such as answering machines, computers with modems, or telephone line splitters) between the printer and the telephone line, and then try sending or receiving a fax.

Can you send or receive a fax?

The problem is solved. Go to step 10.

a Temporarily disable call waiting. Contact your telephone company to

obtain the keypad sequence for temporarily disabling call waiting. b Try sending or receiving a fax.

Can you send or receive a fax?

The problem is solved. Go to step 11.

a Temporarily disable voice mail service. For more information, contact

your telephone company.

Can you send or receive a fax?

The problem is solved. Contact customer support.

Scan the original document one page at a time.

a Dial the fax number. b Scan the document one page at a time.

Can you send or receive a fax?

Show 7 more labels / short text on this page
Troubleshooting 329 · Action Yes No · Step 7 · Step 8 · Step 9 · Step 10 · Step 11
Page 330 of the Lexmark MX710DHE user manual — Can send but not receive faxes
Page 330 · click to enlarge
Page 330

Can receive but not send faxes

The problem is solved. Go to step 2.

Check if the printer is in Fax mode.

From the home screen, touch Fax to put the printer in Fax mode, and then send the fax.

Can you send faxes?

The problem is solved. Go to step 3.

Load the original document properly.

Load the original document faceup, short edge first into the ADF tray or facedown on the scanner glass in the upper left corner.

Can you send faxes?

The problem is solved. Contact customer support.

Set up the shortcut number properly.

  • Check if the shortcut number has been set for the telephone number that you want to dial.
  • Dial the telephone number manually.

Can you send faxes?

Can send but not receive faxes

The problem is solved. Go to step 2.

Check the tray or feeder.

If empty, then load paper in the tray or feeder.

Can you receive faxes?

Show 7 more labels / short text on this page
Troubleshooting 330 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1
Page 331 of the Lexmark MX710DHE user manual — Fax and e-mail functions are not set up
Page 331 · click to enlarge
Page 331

The problem is solved. Go to step 3.

Check the ring count delay settings.

a Open a Web browser, and then type the printer IP address in the

address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly. b Click Settings > Fax Settings > Analog Fax Setup .

c In the “Rings to Answer” field, enter the number of times you want

the phone to ring before the printer answers. d Click Submit.

Can you receive faxes?

The problem is solved. Contact customer support.

Replace the toner cartridge. For more information, see the instruction sheet that came with the supply.

Can you receive faxes?

Fax and e-mail functions are not set up

  • Before you troubleshoot, check if the fax cables are connected.
  • The indicator light is blinking red until you set up fax and e ‑ mail.

a From the home screen, navigate to:

The problem is solved. Contact customer support.

> Settings > General Settings > Run initial setup > Yes > Submit b Turn off the printer, and then turn it back on.

The “Select your language” screen appears on the printer display.

. d Select a country or region, and then touch Next. e Select a time zone, and then touch Next.

c Select a language, and then touch

f Select Fax and E‑mail, and then touch Next.

Are fax and e‑mail functions set up?

Show 5 more labels / short text on this page
Troubleshooting 331 · Action Yes No · Step 2 · Step 3 · Action Yes No
Page 332 of the Lexmark MX710DHE user manual — Solving scanner problems
Page 332 · click to enlarge
Page 332

Received fax has poor print quality

The problem is solved. Go to step 2.

Ask the person who sent you the fax to:

a Check if the quality of the original document is satisfactory. b Increase the fax scan resolution, if possible.

c Resend the fax.

Is the fax print quality satisfactory?

The problem is solved. Go to step 3.

Decrease the incoming fax transmission speed.

a Open a Web browser, and then type the printer IP address in the

address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. b Click Settings > Fax Settings > Analog Fax Setup .

c In the Max Speed menu, click one of the following:

  • 2400
  • 4800
  • 9600
  • 14400
  • 33600 d Click Submit , and then resend the fax.

Is the fax print quality satisfactory?

The problem is solved. Contact customer support.

Replace the toner cartridge.

When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax.

Is the fax print quality satisfactory?

Solving scanner problems

  • “Cannot scan from a computer” on page 333
  • “Partial document or photo scans” on page 333
  • “Poor scanned image quality” on page 334
Show 5 more labels / short text on this page
Troubleshooting 332 · Action Yes No · Step 1 · Step 2 · Step 3
Page 333 of the Lexmark MX710DHE user manual — Partial document or photo scans
Page 333 · click to enlarge
Page 333
  • “Scan job was not successful” on page 335
  • “Scanner unit does not close” on page 335
  • “Scanning takes too long or freezes the computer” on page 335
  • “The scanner does not respond” on page 336

Cannot scan from a computer

Go to step 3. Go to step 2.

Make sure the printer is turned on and that Ready appears on the printer display before scanning a job.

Does Ready appear before scanning the job?

Clear the error message.

Go to step 3.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is there an error message on the printer display?

Contact customer support.

Tighten the cable connections.

Check the cable connections between the printer and the print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Are the cable connections between the printer and the print server secure?

Partial document or photo scans

Check the placement of the document or photo.

Contact customer support.

Load the document or photo facedown on the scanner glass in the upper left corner.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Show 6 more labels / short text on this page
Troubleshooting 333 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 334 of the Lexmark MX710DHE user manual — Poor scanned image quality
Page 334 · click to enlarge
Page 334

Poor scanned image quality

Clear the error message.

Go to step 2.

Check if an error message appears on the display.

Is there an error message on the printer display?

Go to step 3. Increase the scan resolution settings for a higher‑quality output.

Check the quality of the original document.

Is the quality of the original document satisfactory?

Go to step 4. See “Cleaning the scanner glass” on page 239.

Clean the scanner glass and the ADF glass using a clean, lint‑free cloth dampened with water.

Is the scanner glass clean?

Go to step 5. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 6. See “Print quality problems” on page 304.

Send a print job, and then check for print quality problems.

  • From the General Settings menu, adjust the Eco ‑ Mode settings.
  • From the Copy menu, adjust the Darkness setting.
  • When the print becomes faded, replace the toner cartridge.

Is the print quality satisfactory?

Go to step 7. Change the Content Type and Content Source settings to match the document being scanned.

Check the scan settings.

From the Scan screen, make sure the Content Type and Content Source settings are correct for the document being scanned.

Are the Content Type and Content Source settings correct for the document being scanned?

Problem solved. Contact customer support.

Increase the scan resolution settings for a higher‑quality output.

Did the increased resolution produce a higher‑quality output?

Show 9 more labels / short text on this page
Troubleshooting 334 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6 · Step 7
Page 335 of the Lexmark MX710DHE user manual — Scanning takes too long or freezes the computer
Page 335 · click to enlarge
Page 335

Scan job was not successful

Go to step 2. Connect the cables properly.

Check the cable connections.

Make sure the Ethernet or USB cable is securely connected to the computer and the printer.

Are the cables securely connected?

Change the file name. Go to step 3.

Check if the file name is already in use.

Is the file name already in use?

Close the file you are scanning.

Go to step 4.

Check if the document or photo you want to scan is open in another application or being used by another user.

Is the file you want to scan open by another application or user?

Contact customer support.

Select the Append time stamp or Overwrite existing file check box in the destination configuration settings.

Check if either the Append time stamp or the Overwrite existing file check box is selected in the destination configuration settings.

Is the Append time stamp or Overwrite existing file check box selected in the destination configuration settings?

Scanner unit does not close

Check if there are obstructions in the scanner unit.

The problem is solved. Contact customer support.

a Lift the scanner unit. b Remove any obstruction keeping the scanner unit open.

c Lower the scanner unit.

Did the scanner unit close correctly?

Scanning takes too long or freezes the computer

Go to step 2. The problem is solved.

Check if other applications are interfering with the scan.

Close all applications that are not being used.

Does scanning still take too long or freeze the computer?

Show 9 more labels / short text on this page
Troubleshooting 335 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Action Yes No · Action Yes No · Step 1
Page 336 of the Lexmark MX710DHE user manual — The scanner does not respond
Page 336 · click to enlarge
Page 336

Contact customer support.

The problem is solved.

Select a lower scan resolution.

Does scanning still take too long or freeze the computer?

The scanner does not respond

Go to step 2. Turn on the printer.

Check if the printer is turned on.

Is the printer turned on?

Go to step 3. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if the printer cable is securely attached to the printer and the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 4. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Turn on the switch or reset the breaker.

Go to step 5.

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 6.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Unplug the other electrical equipment and turn on the printer. If the printer does not work, then reconnect the other electrical equipment and then go to step 6.

Go to step 7.

Check other electrical equipment plugged into the outlet.

Are the other electrical equipment working?

Show 10 more labels / short text on this page
Troubleshooting 336 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 337 of the Lexmark MX710DHE user manual — An application error has occurred
Page 337 · click to enlarge
Page 337

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Are the printer and scanner working?

Solving home screen applications problems

An application error has occurred

Go to step 2. Contact customer support.

Check the system log for relevant details.

a Open a Web browser, and then type the printer IP address in the

address field. If you do not know the IP address of the printer, then you can:

  • View the IP address on the printer home screen.
  • Print a network setup page or the menu settings pages, and then locate the IP address in the TCP/IP section.

c From the Filter menu, select an application status. d From the Application menu, select an application, and then click

Submit.

Does an error message appear in the log?

The problem is solved. Contact customer support.

Resolve the error.

Is the application working now?

Show 6 more labels / short text on this page
Troubleshooting 337 · Action Yes No · Step 7 · Action Yes No · Step 1 · Step 2
Page 338 of the Lexmark MX710DHE user manual — Contacting customer support
Page 338 · click to enlarge
Page 338

Embedded Web Server does not open

Step 1 Make sure the printer IP address is correct.

Go to step 2. Type the correct printer IP address in the address field of your Web browser.

View the printer IP address:

  • From the printer home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Is the printer IP address correct?

Go to step 3. Turn on the printer.

Check if the printer is turned on.

Is the printer turned on?

Go to step 4. Contact your system support person.

Check if the network connection is working.

Is the network connection working?

Go to step 5. Tighten the cable connection.

Make sure the cable connections to the printer and print server are secure.

For more information, see the setup documentation that came with the printer.

Are the cable connections to the printer and print server secure?

Go to step 6. Contact your system support person.

Temporarily disable the Web proxy servers.

Are the Web proxy servers disabled?

Step 6 Access the Embedded Web Server again by typing the correct IP address in the address field.

The problem is solved. Contact customer support.

Did the Embedded Web Server open?

Contacting customer support

When you contact customer support, describe the problem you are experiencing, the printer control panel light sequence, and the troubleshooting steps you have already taken to find a solution.

Show 6 more labels / short text on this page
Troubleshooting 338 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5
Page 339 of the Lexmark MX710DHE user manual — Embedded Web Server does not open
Page 339 · click to enlarge
Page 339

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Troubleshooting 339

Page 340 of the Lexmark MX710DHE user manual — GOVERNMENT END USERS
Page 340 · click to enlarge
Page 340

Notices

Product information

Product name:

Machine type:

Model(s):

036, 037, 236, 237

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2012 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

Lexmark MX710, MX711 · November 2012

Page 341 of the Lexmark MX710DHE user manual — Trademarks
Page 341 · click to enlarge
Page 341

Trademarks

Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

ScanBack is a trademark of Lexmark International, Inc.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

The following terms are trademarks or registered trademarks of these companies:

Lexmark MX710DHE — Trademarks diagram (page 341)
Fig. 172 · Trademarks

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Page 342 of the Lexmark MX710DHE user manual — Noise emission levels
Page 342 · click to enlarge
Page 342

Univers Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Modular component notice

This product may contain the following modular component(s):

Lexmark Regulatory Type/Model LEX-M01-005; FCC ID:IYLLEXM01005; IC:2376A-M01005

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Show 4 more labels / short text on this page
Printing 58 dBA · Scanning 57 dBA · Copying 58 dBA · Ready 33 dBA
Page 343 of the Lexmark MX710DHE user manual — ENERGY STAR
Page 343 · click to enlarge
Page 343

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Page 344 of the Lexmark MX710DHE user manual — 危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。
Page 344 · click to enlarge
Page 344

Temperature information

Ambient operating temperature 15.6 to 32.2°C (60 to 90°F)

Shipping temperature -40 to 43.3°C (-40 to 110°F)

Storage temperature and relative humidity 1 to 35°C (34 to 95°F)

8 to 80% RH

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 10 milliwatt gallium arsenide laser operating in the wavelength of 787-800 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser. VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Page 345 of the Lexmark MX710DHE user manual — Off mode
Page 345 · click to enlarge
Page 345

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 825 (MX710); 925 (MX711)

Copy The product is generating hard‑copy output from hard‑copy original documents.

860 (MX710); 960 (MX711)

Scan The product is scanning hard‑copy documents. 130

Ready The product is waiting for a print job. 110 (Ready 1); 55 (Ready 2)

Sleep Mode The product is in a high‑level energy‑saving mode. 14 (MX710); 15 (MX711)

Hibernate The product is in a low‑level energy‑saving mode. 0.7

Off The product is plugged into an electrical outlet, but the power switch is turned off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 180 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions Disabled

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Page 346 of the Lexmark MX710DHE user manual — Notice to users of the US telephone network: FCC requirements
Page 346 · click to enlarge
Page 346

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Radio interference notice

This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Regulatory notices for telecommunication terminal equipment

This section contains regulatory information pertaining to products that contain telecommunication terminal equipment such as facsimile.

Notice to users of the US telephone network: FCC requirements

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

Page 347 of the Lexmark MX710DHE user manual — Total energy usage
Page 347 · click to enlarge
Page 347

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

Page 348 of the Lexmark MX710DHE user manual — Notice to users of the New Zealand telephone network
Page 348 · click to enlarge
Page 348

Notice to users of the Canadian telephone network

This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

This equipment uses CA11A telephone jacks.

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.

Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.

This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.

Page 349 of the Lexmark MX710DHE user manual — Notice to Users in the European Union
Page 349 · click to enlarge
Page 349

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:

  • There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
  • The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
  • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland. The filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.

Uso del prodotto in Svizzera

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.

Notice to Users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Page 350 of the Lexmark MX710DHE user manual — Industry Canada (Canada)
Page 350 · click to enlarge
Page 350

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Refer to the table at the end of the Notices section for further compliance information.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

Page 351 of the Lexmark MX710DHE user manual — Notice to users in the European Union
Page 351 · click to enlarge
Page 351

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium

Page 352 of the Lexmark MX710DHE user manual — Notice to users in the European Union
Page 352 · click to enlarge
Page 352

Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

Lexmark MX710DHE — Notice to users in the European Union diagram (page 352)
Fig. 173 · Notice to users in the European Union

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Page 353 of the Lexmark MX710DHE user manual — Limited warranty service
Page 353 · click to enlarge
Page 353

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS,

LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

Page 354 of the Lexmark MX710DHE user manual — Extent of limited warranty
Page 354 · click to enlarge
Page 354

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Page 355 of the Lexmark MX710DHE user manual — Patent acknowledgment
Page 355 · click to enlarge
Page 355

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

Page 356 of the Lexmark MX710DHE user manual — Patent acknowledgment
Page 356 · click to enlarge
Page 356

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 358 of the Lexmark MX710DHE user manual — Table of contents
Page 358 · click to enlarge
Page 358

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 359 of the Lexmark MX710DHE user manual — Table of contents
Page 359 · click to enlarge
Page 359

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 360 of the Lexmark MX710DHE user manual — Table of contents
Page 360 · click to enlarge
Page 360

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 361 of the Lexmark MX710DHE user manual — Table of contents
Page 361 · click to enlarge
Page 361

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 362 of the Lexmark MX710DHE user manual — Table of contents
Page 362 · click to enlarge
Page 362

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 363 of the Lexmark MX710DHE user manual — Table of contents
Page 363 · click to enlarge
Page 363

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 364 of the Lexmark MX710DHE user manual — Table of contents
Page 364 · click to enlarge
Page 364

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 365 of the Lexmark MX710DHE user manual — Table of contents
Page 365 · click to enlarge
Page 365

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 366 of the Lexmark MX710DHE user manual — Table of contents
Page 366 · click to enlarge
Page 366

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 367 of the Lexmark MX710DHE user manual — Table of contents
Page 367 · click to enlarge
Page 367

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.13Using the ADF and scanner glassp.14Understanding the printer control panelp.15Using the printer control panelp.15Understanding the colors of the Sleep button and indicator lightsp.15Understanding the home screenp.16Using the touch-screen buttonsp.18Setting up and using the home screen applicationsp.20Finding the IP address of the printerp.20Finding the IP address of the computerp.20Accessing the Embedded Web Serverp.21Customizing the home screenp.21Understanding the different applicationsp.22Activating the home screen applicationsp.22Finding information about the home screen applicationsp.22Setting up Forms and Favoritesp.23Setting up Card Copyp.23Using MyShortcutp.24Setting up Multi Sendp.25Setting up Scan to Networkp.26Setting up Remote Operator Panelp.26Exporting and importing a configurationp.27Additional printer setupp.28Installing internal optionsp.28Available internal optionsp.28Accessing the controller boardp.29Installing a memory cardp.32Installing an optional cardp.34Installing an Internal Solutions Portp.36Installing a printer hard diskp.41Removing a printer hard diskp.47Installing hardware optionsp.49Order of installationp.49Installing optional traysp.49Attaching cablesp.52Setting up the printer softwarep.54Installing the printer softwarep.54Updating available options in the printer driverp.55Networkingp.56Preparing to set up the printer on an Ethernet networkp.56Installing the printer on an Ethernet networkp.57Preparing to set up the printer on a wireless networkp.58Connecting the printer using the Wireless Setup Wizardp.59Connecting the printer to a wireless network using Wi-Fi Protected Setupp.60Connecting the printer to a wireless network using the Embedded Web Serverp.60Changing port settings after installing a new network Internal Solutions Portp.61Setting up serial printingp.62Verifying printer setupp.64Printing a menu settings pagep.64Printing a network setup pagep.64Loading paper and specialty mediap.65Setting the paper size and typep.65Configuring Universal paper settingsp.65Loading the 250or 550-sheet trayp.65Loading the 2100-sheet trayp.72Loading the multipurpose feederp.78Linking and unlinking traysp.82Linking and unlinking traysp.82Creating a custom name for a paper typep.83Assigning a custom paper typep.83Paper and specialty media guidep.85Using specialty mediap.85Tips on using card stockp.85Tips on using envelopesp.85Tips on using labelsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Paper guidelinesp.87Paper characteristicsp.87Selecting paperp.88Selecting preprinted forms and letterheadp.88Using recycled paper and other office papersp.88Storing paperp.90Supported paper sizes, types, and weightsp.90Paper sizes supported by the printerp.90Paper types and weights supported by the printerp.92Printingp.93Printing forms and a documentp.93Printing formsp.93Printing a documentp.93Adjusting toner darknessp.93Printing from a flash drivep.94Printing from a flash drivep.94Supported flash drives and file typesp.95Printing confidential and other held jobsp.96Storing print jobs in the printerp.96Printing confidential and other held jobsp.97Modifying confidential print settingsp.97Printing information pagesp.98Printing a font sample listp.98Printing a directory listp.98Canceling a print jobp.98Canceling a print job from the printer control panelp.98Canceling a print job from the computerp.98Copyingp.100Making copiesp.100Making a quick copyp.100Copying using the ADFp.100Copying using the scanner glassp.101Copying photosp.101Copying on specialty mediap.101Copying on transparenciesp.101Copying on letterheadp.102Creating a copy shortcut using the printer control panelp.102Customizing copy settingsp.103Copying to a different sizep.103Making copies using paper from a selected trayp.103Copying different paper sizesp.103Copying on both sides of the paper (duplexing)p.104Reducing or enlarging copiesp.105Adjusting copy qualityp.105Collating copiesp.106Placing separator sheets between copiesp.106Copying multiple pages onto a single sheetp.107Creating a custom copy jobp.108Placing information on copiesp.108Placing a header or footer on pagesp.108Placing an overlay message on each pagep.109Canceling a copy jobp.109Canceling a copy job while the original document is in the ADFp.109Canceling a copy job while copying pages using the scanner glassp.109Canceling a copy job while pages are being printedp.109Understanding the copy optionsp.110Copy fromp.110Copy top.110Scalep.110Darknessp.110Sides (Duplex)p.110Collatep.110Copiesp.111Contentp.111Save As Shortcutp.111Using the advanced optionsp.111E-mailingp.113Setting up the printer to e-mailp.113Setting up the e-mail functionp.113Configuring e-mail settingsp.113Creating an e-mail shortcutp.114Creating an e-mail shortcut using the Embedded Web Serverp.114Creating an e-mail shortcut using the printer control panelp.114E-mailing a documentp.115Sending an e-mail using the printer control panelp.115Sending an e-mail using a shortcut numberp.115Sending an e-mail using the address bookp.116Customizing e-mail settingsp.116Adding e-mail subject and message informationp.116Changing the output file typep.116Canceling an e-mailp.117Understanding the e-mail optionsp.117Recipient(s)p.117Subjectp.117Messagep.117File Namep.117Save As Shortcutp.117Original Sizep.118Darknessp.118Resolutionp.118Contentp.118Send Asp.118Page Setupp.119Scan Previewp.119Using the advanced optionsp.119Faxingp.120Setting up the printer to faxp.120Initial fax setupp.120Choosing a fax connectionp.121Scenario 1: Standard telephone linep.121Scenario 2: Digital Subscriber Line (DSL)p.125Scenario 3: VoIP telephone servicep.126Scenario 4: Digital telephone service through a cable providerp.127Scenario 5: Countries or regions with different telephone wall jacks and plugsp.129Connecting to a distinctive ring servicep.133Setting the outgoing fax name and numberp.133Setting the date and timep.134Configuring the printer to observe daylight saving timep.134Sending a faxp.134Sending a fax using the printer control panelp.134Sending a fax using the computerp.135Sending a fax using a shortcut numberp.135Sending a fax using the address bookp.136Sending a fax at a scheduled timep.136Creating shortcutsp.137Creating a fax destination shortcut using the Embedded Web Serverp.137Creating a fax destination shortcut using the printer control panelp.137Customizing fax settingsp.138Changing the fax resolutionp.138Making a fax lighter or darkerp.138Viewing a fax logp.138Blocking junk faxesp.139Canceling an outgoing faxp.139Canceling a fax while the original documents are still scanningp.139Canceling a fax after the original documents have been scanned to memoryp.139Holding and forwarding faxesp.139Holding faxesp.139Forwarding a faxp.140Understanding the fax optionsp.140Contentp.140Resolutionp.141Darknessp.141Page Setupp.141Scan Previewp.142Delayed Sendp.142Using the advanced optionsp.142Scanningp.143Using Scan to Networkp.143Scanning to an FTP addressp.143Creating shortcutsp.143Creating an FTP shortcut using the Embedded Web Serverp.143Creating an FTP shortcut using the printer control panelp.144Scanning to an FTP addressp.144Scanning to an FTP address using the printer control panelp.144Scanning to an FTP address using a shortcut numberp.145Scanning an FTP using the address bookp.145Scanning to a computer or flash drivep.146Scanning to a computer using the Embedded Web Serverp.146Setting up Scan to Computerp.147Scanning to a flash drivep.148Understanding the scan optionsp.148FTPp.148File Namep.148Save As Shortcutp.148Original Sizep.149Send Asp.149Resolutionp.149Darknessp.149Page Setupp.149Contentp.149Scan Previewp.150Using the advanced optionsp.150Understanding the printer menusp.151Menus listp.151Paper menup.152Default Source menup.152Configure MP menup.152Paper Size/Type menup.153Substitute Size menup.156Paper Texture menup.156Paper Weight menup.158Paper Loading menup.160Custom Types menup.161Custom Names menup.161Custom Scan Sizes menup.162Universal Setup menup.162Reports Menup.163Reports menup.163Network/Ports menup.164Active NIC menup.164Standard Network or Network [x] menup.165Reports menup.166Network Card menup.166TCP/IP menup.167IPv6 menup.168Wireless menup.169AppleTalk menup.169Standard USB menup.170Parallel [x] menup.171Serial [x] menup.173SMTP Setup menup.176Security menup.177Edit Security Setups menup.177Miscellaneous Security Settings menup.178Confidential Print menup.179Disk Wiping menup.180Security Audit Log menup.180Set Date/Time menup.181Settings menup.182General Settings menup.182Copy Settings menup.192Fax Settings menup.195Fax Mode (Analog Fax Setup) menup.195E-mail Settings menup.203FTP Settings menup.207Flash Drive menup.211Print Settingsp.215Setup menup.215Finishing menup.217Quality menup.218Job Accounting menup.219Utilities menup.221XPS menup.222PDF menup.222PostScript menup.222PCL Emul menup.223HTML menup.225Image menup.226Help menup.227Saving money and the environmentp.228Saving paper and tonerp.228Using recycled paperp.228Conserving suppliesp.228Saving energyp.229Using Eco-Modep.229Reducing printer noisep.229Adjusting Sleep modep.230Using Hibernate modep.231Adjusting the brightness of the printer displayp.231Recyclingp.232Recycling Lexmark productsp.232Recycling Lexmark packagingp.232Returning Lexmark cartridges for reuse or recyclingp.232Securing the printerp.234Statement of Volatilityp.234Erasing volatile memoryp.234Erasing non-volatile memoryp.235Erasing printer hard disk memoryp.235Configuring printer hard disk encryptionp.236Finding printer security informationp.237Maintaining the printerp.238Cleaning the printer partsp.238Cleaning the printerp.238Cleaning the scanner glassp.239Checking the status of parts and suppliesp.241Checking the status of parts and supplies on the printer control panelp.241Checking the status of parts and supplies from the Embedded Web Serverp.241Ordering parts and suppliesp.242Using genuine Lexmark parts and suppliesp.242Estimated number of remaining pagesp.242Ordering toner cartridgesp.242Ordering an imaging unitp.243Ordering a maintenance kitp.244Storing suppliesp.245Replacing suppliesp.245Replacing the toner cartridgep.245Replacing the imaging unitp.247Moving the printerp.251Before moving the printerp.251Moving the printer to another locationp.252Shipping the printerp.252Managing the printerp.253Finding advanced networking and administrator informationp.253Checking the virtual displayp.253Setting up e-mail alertsp.253Viewing reportsp.253Configuring supply notifications from the Embedded Web Serverp.254Restoring factory default settingsp.255Clearing jamsp.256Avoiding jamsp.256Understanding jam messages and locationsp.257[x]-page jam, lift front cover to remove cartridge. [200–201]p.259[x]-page jam, open upper rear door. [202]p.262[x]-page jam, open upper and lower rear door. [231–234]p.263[x]-page jam, remove standard bin jam. [203]p.265[x]-page jam, remove tray 1 to clear duplex. [235–239]p.266[x]-page jam, open tray [x]. [24x]p.267[x]-page jam, clear manual feeder. [250]p.268[x]-page jam, open automatic feeder top cover. [28y.xx]p.270Troubleshootingp.272Understanding printer messagesp.272Cartridge low [88.xy]p.272Cartridge nearly low [88.xy]p.272Cartridge very low, [x] estimated pages remain [88.xy]p.272Change [paper source] to [custom type name] load [orientation]p.272Change [paper source] to [custom string] load [orientation]p.272Change [paper source] to [paper size] load [orientation]p.272Change [paper source] to [paper type] [paper size] load [orientation]p.273Check tray [x] connectionp.273Close door or insert cartridgep.273Close flatbed cover and load originals if restarting job [2yy.xx]p.273Close front doorp.274Close top access coverp.274Complex page, some data may not have printed [39]p.274Configuration change, some held jobs were not restored [57]p.274Defective flash detected [51]p.274Disk full [62]p.274Disk full, scan job canceledp.274Disk must be formatted for use in this devicep.275Disk near full. Securely clearing disk space.p.275Error reading USB drive. Remove USB.p.275Error reading USB hub. Remove hub.p.275Fax memory fullp.275Fax partition inoperative. Contact system administrator.p.275Fax server 'To Format' not set up. Contact system administrator.p.275Fax Station Name not set up. Contact system administrator.p.276Fax Station Number not set up. Contact system administrator.p.276Imaging unit low [84.xy]p.276Imaging unit nearly low [84.xy]p.276Imaging unit very low, [x] estimated pages remain [84.xy]p.276Incompatible tray [x] [59]p.276Incorrect paper size, open [paper source] [34]p.276Insert Tray [x]p.277Install duplexp.277Install Tray [x]p.277Insufficient memory for Flash Memory Defragment operation [37]p.277Insufficient memory to collate job [37]p.278Insufficient memory to support Resource Save feature [35]p.278Insufficient memory, some Held Jobs were deleted [37]p.278Insufficient memory, some held jobs will not be restored [37]p.278Load [paper source] with [custom string] [paper orientation]p.278Load [paper source] with [custom type name] [paper orientation]p.278Load [paper source] with [paper size] [paper orientation]p.279Load [paper source] with [paper type] [paper size] [paper orientation]p.279Load Manual Feeder with [custom string] [paper orientation]p.279Load Manual Feeder with [custom type name] [paper orientation]p.279Load Manual Feeder with [paper size] [paper orientation]p.280Load Manual Feeder with [paper type] [paper size] [paper orientation]p.280Maintenance kit low [80.xy]p.280Maintenance kit nearly low [80.xy]p.280Maintenance kit very low, [x] estimated pages remain [80.xy]p.280Memory full [38]p.280Memory full, cannot print faxesp.280Memory full, cannot send faxesp.281Network [x] software error [54]p.281No analog phone line connected to modem, fax is disabled.p.281Non-Lexmark [supply type], see User’s Guide [33.xy]p.281Not enough free space in flash memory for resources [52]p.281Paper changes neededp.282Parallel port [x] disabled [56]p.282Printer had to restart. Last job may be incomplete.p.282Reinstall missing or unresponsive cartridge [31.xy]p.282Reinstall missing or unresponsive imaging unit [31.xy]p.282Remove defective disk [61]p.283Remove packaging material, [area name]p.283Remove paper from standard output binp.283Replace all originals if restarting job.p.283Replace cartridge, 0 estimated pages remain [88.xy]p.283Replace cartridge, printer region mismatch [42.xy]p.283Replace imaging unit, 0 estimated pages remain [84.xy]p.284Replace jammed originals if restarting job.p.284Replace last scanned page and jammed originals if restarting job.p.284Replace maintenance kit, 0 estimated pages remain [80.xy]p.284Replace missing fuser [80.xx]p.284Replace roller kit [81.xx]p.285Replace separator padp.285Replace unsupported cartridge [32.xy]p.285Replace unsupported imaging unit [32.xy]p.285Replace wiperp.285Restore held jobs?p.285Scan document too longp.285Scanner automatic feeder cover openp.286Scanner disabled by admin [840.01]p.286Scanner disabled. Contact system administrator if problem persists. [840.02]p.286Scanner jam, remove all originals from the scanner [2yy.xx]p.286Scanner jam, remove jammed originals from the scanner [2yy.xx]p.286Scanner maintenance required soon, use ADF Kit [80]p.286Serial option [x] error [54]p.286Serial port [x] disabled [56]p.286Some held jobs were not restoredp.287Standard network software error [54]p.287Standard USB port disabled [56]p.287Supply needed to complete jobp.287Too many disks installed [58]p.287Too many flash options installed [58]p.287Too many trays attached [58]p.288Tray [x] paper size unsupportedp.288Unformatted flash detected [53]p.288Unsupported camera mode, unplug camera and change modep.288Unsupported diskp.288Unsupported option in slot [x] [55]p.288USB port [x] disabled [56]p.288Weblink server not set up. Contact system administrator.p.289Solving printer problemsp.289Basic printer problemsp.289The printer is not respondingp.289Printer display is blankp.291Hardware and internal option problemsp.291Cannot detect internal optionp.291Internal print server does not operate correctlyp.292Internal Solutions Port does not operate correctlyp.292Tray problemsp.293USB/parallel interface card does not operate correctlyp.294Paper feed problemsp.294Jammed pages are not reprintedp.294Paper frequently jamsp.295Paper jam message remains after jam is clearedp.295Solving print problemsp.296Printing problemsp.296Confidential and other held jobs do not printp.296Envelope seals when printingp.297Error message about reading the flash drive appearsp.297Incorrect characters printp.298Job prints from the wrong tray or on the wrong paperp.298Large jobs do not collatep.299Multiple-language PDF files do not printp.299Print jobs do not printp.300Print job takes longer than expectedp.301Printing slows downp.302Tray linking does not workp.302Unexpected page breaks occurp.303Print quality problemsp.304Characters have jagged or uneven edgesp.304Clipped pages or imagesp.305Compressed images appear on printsp.306Gray background on printsp.306Horizontal voids appear on printsp.307Incorrect margins on printsp.308Paper curlp.309Printer is printing blank pagesp.310Printer is printing solid black pagesp.311Print irregularitiesp.311Print is too darkp.313Print is too lightp.314Repeating defects appear on printsp.316Shadow images appear on printsp.317Skewed printp.318Streaked horizontal lines appear on printsp.318Streaked vertical lines appear on printsp.319Toner fog or background shading appears on printsp.321Toner rubs offp.321Toner specks appear on printsp.322Transparency print quality is poorp.322Uneven print densityp.322Vertical voids appear on printsp.323Solving copy problemsp.324Copier does not respondp.324Partial document or photo copiesp.324Poor copy qualityp.325Scanner unit does not closep.326Solving fax problemsp.327Caller ID is not shownp.327Cannot send or receive a faxp.327Can receive but not send faxesp.330Can send but not receive faxesp.330Fax and e-mail functions are not set upp.331Received fax has poor print qualityp.332Solving scanner problemsp.332Cannot scan from a computerp.333Partial document or photo scansp.333Poor scanned image qualityp.334Scan job was not successfulp.335Scanner unit does not closep.335Scanning takes too long or freezes the computerp.335The scanner does not respondp.336Solving home screen applications problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.338Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Federal Communications Commission (FCC) compliance information statementp.342Modular component noticep.342Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.344Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.345Total energy usagep.346European Community (EC) directives conformityp.346Radio interference noticep.346Regulatory notices for telecommunication terminal equipmentp.346Notice to users of the US telephone network: FCC requirementsp.346Notice to users of the Canadian telephone networkp.348Notice to users of the New Zealand telephone networkp.348Notice to Users in the European Unionp.349Regulatory notices for wireless productsp.350Exposure to radio frequency radiationp.350Industry Canada (Canada)p.350Notice to users in the European Unionp.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.353Patent acknowledgmentp.355Indexp.357
Page 368 of the Lexmark MX710DHE user manual — X XPS menu 222
Page 368 · click to enlarge
Page 368

vertical voids appear 323 viewing

reports 253 viewing a fax log 138 virtual display

checking, using Embedded Web

Server 253 voice mail

setting up 121 Voice over Internet Protocol (VoIP)

fax setup 126 voids appear 323 VoIP adapter 126 volatile memory 234

W Weblink server not set up. Contact system administrator. 289 wiping the printer hard disk 235 Wireless menu 169 wireless network

configuration information 58 wireless network setup

using the Embedded Web

Server 60 wireless setup wizard

X XPS menu 222

Show 4 more labels / short text on this page
Index 368 · erasing 234 volatility · statement of 234 · using 59
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark MX710DHE

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark MX710DHE

Be the first to ask — other owners or our team will answer.

Original document

Lexmark MX710DHE manual PDF

368 pages·15.6 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…