EN
Lexmark logo
Official user manual

Lexmark MS810

372 pages·18.5 MB·Printer·PDF·ENDEFRITNLJA
Lexmark MS810
Table of Contents 533 sections Contents · Safety information · Overview · Using this guide · … ShowHide
Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 1 of the Lexmark MS810 user manual — 210, 230, 23E, 410, 430, 630, 63E
Page 1 · click to enlarge
Page 1

MS810 Series

User's Guide

October 2012 www.lexmark.com

Machine type(s):

Model(s):

210, 230, 23E, 410, 430, 630, 63E

Page 2 of the Lexmark MS810 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 6 of the Lexmark MS810 user manual — Safety information
Page 6 · click to enlarge
Page 6

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If two or more optional finishers are installed, then remove the finishers individually from the printer.

– Make sure to remove the topmost finisher first.

– To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher. • If the printer does not have a caster base but is configured with optional trays, then remove the trays.

  • Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Make sure there is adequate clearance around the printer.
  • Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Safety information 6

Page 7 of the Lexmark MS810 user manual — Safety information
Page 7 · click to enlarge
Page 7

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

SAVE THESE INSTRUCTIONS.

Safety information 7

Page 8 of the Lexmark MS810 user manual — Finding information about the printer
Page 8 · click to enlarge
Page 8

Overview

Using this guide

This User’s Guide provides general and specific information on using the printer models that are listed on the cover page.

The following chapters contain information applicable to all printer models:

  • Selecting a location for the printer
  • Additional printer setup
  • Paper and specialty media guide
  • Understanding printer menus
  • Saving money and the environment
  • Maintaining the printer
  • Clearing jams
  • Troubleshooting

To find instructions for your printer:

  • Use the table of contents.
  • Use the Search function or the Find toolbar of your application to search for page content.

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides are available on the Software and Documentation CD. For updates, visit our Web site at http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then look for Printer and Software Documentation under the Pubs folder. From the list of publications, click the Networking Guide link.

Overview 8

Page 9 of the Lexmark MS810 user manual — Overview
Page 9 · click to enlarge
Page 9
What are you looking for?Find it here Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system. The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark Support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the US—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Overview 9

Page 10 of the Lexmark MS810 user manual — Selecting a location for the printer
Page 10 · click to enlarge
Page 10

Selecting a location for the printer 10

Lexmark MS810 — Selecting a location for the printer diagram (page 10)
Fig. 1 · Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:
Lexmark MS810 — Selecting a location for the printer diagram (page 10)
Fig. 2 · Selecting a location for the printer
1Right side152 mm (6 in.) 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) 5Top115 mm (4.5 in.)
Page 11 of the Lexmark MS810 user manual — Selecting a location for the printer
Page 11 · click to enlarge
Page 11

Selecting a location for the printer 11

Lexmark MS810 — Selecting a location for the printer diagram (page 11)
Fig. 3 · Selecting a location for the printer
Right side 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) Top
1Right side152 mm (6 in.) 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) 5Top115 mm (4.5 in.)
Page 12 of the Lexmark MS810 user manual — Accessing the controller board
Page 12 · click to enlarge
Page 12

Additional printer setup 12

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

  • Memory card – DDR3 DIMM – Flash memory
  • Fonts
  • Firmware cards – Forms and Bar Code – PRESCRIBE – IPDS
  • Printer hard disk
  • Lexmark TM Internal Solutions Ports (ISP) – Parallel 1284-B interface – MarkNet TM N8350 802.11 b/g/n wireless printer server – RS-232-C serial interface

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Remove the controller board access cover.

Lexmark MS810 — Accessing the controller board diagram (page 12)
Fig. 4 · Accessing the controller board
Lexmark MS810 — Accessing the controller board diagram (page 12)
Fig. 5 · Accessing the controller board
Page 13 of the Lexmark MS810 user manual — Additional printer setup
Page 13 · click to enlarge
Page 13

Additional printer setup 13

2 Using a screwdriver, loosen the screws on the controller board shield.

Lexmark MS810 — Additional printer setup diagram (page 13)
Fig. 6 · Additional printer setup
Lexmark MS810 — Additional printer setup diagram (page 13)
Fig. 7 · Additional printer setup

3 Remove the shield.

Lexmark MS810 — Additional printer setup diagram (page 13)
Fig. 8 · Additional printer setup
Lexmark MS810 — Additional printer setup diagram (page 13)
Fig. 9 · Additional printer setup
Page 14 of the Lexmark MS810 user manual — Additional printer setup
Page 14 · click to enlarge
Page 14

Additional printer setup 14

4 Use the following illustration to locate the appropriate connector:

Lexmark MS810 — Additional printer setup diagram (page 14)
Fig. 10 · Additional printer setup

1 Lexmark Internal Solutions Port or printer hard disk connector

2 Option card connector

3 Memory card connector

5 Align the screws with the holes on the shield, and then reattach the shield.

Lexmark MS810 — Additional printer setup diagram (page 14)
Fig. 11 · Additional printer setup
Page 15 of the Lexmark MS810 user manual — Installing a memory card
Page 15 · click to enlarge
Page 15

Additional printer setup 15

6 Tighten the screws on the shield.

7 Reattach the access cover.

Lexmark MS810 — Installing a memory card diagram (page 15)
Fig. 12 · Installing a memory card
Lexmark MS810 — Installing a memory card diagram (page 15)
Fig. 13 · Installing a memory card

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 16 of the Lexmark MS810 user manual — Installing a memory card
Page 16 · click to enlarge
Page 16

Additional printer setup 16

An optional memory card can be purchased separately and attached to the controller board.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the memory card.

3 Align the notch (1) on the memory card with the ridge (2) on the connector.

Lexmark MS810 — Installing a memory card diagram (page 16)
Fig. 14 · Installing a memory card

4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

Lexmark MS810 — Installing a memory card diagram (page 16)
Fig. 15 · Installing a memory card

5 Reattach the controller board shield, and then the controller board access cover.

Page 17 of the Lexmark MS810 user manual — Installing an Internal Solutions Port
Page 17 · click to enlarge
Page 17

Additional printer setup 17

Installing an Internal Solutions Port

The controller board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 If an optional printer hard disk is installed, then remove the printer hard disk first.

For more information, see “Removing a printer hard disk” on page 27.

3 Unpack the ISP kit.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 17)
Fig. 16 · Installing an Internal Solutions Port
Lexmark MS810 — Installing an Internal Solutions Port diagram (page 17)
Fig. 17 · Installing an Internal Solutions Port

2 Screw for attaching the plastic bracket to the ISP

3 Screws for attaching the ISP mounting bracket to the controller board shield

1 ISP solution · 4 Plastic bracket

Page 18 of the Lexmark MS810 user manual — Installing an Internal Solutions Port
Page 18 · click to enlarge
Page 18

Additional printer setup 18

4 Remove the metal cover from the ISP opening. a Loosen the screw.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 18)
Fig. 18 · Installing an Internal Solutions Port

b Lift the metal cover, and then pull it out completely.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 18)
Fig. 19 · Installing an Internal Solutions Port
Lexmark MS810 — Installing an Internal Solutions Port diagram (page 18)
Fig. 20 · Installing an Internal Solutions Port
Lexmark MS810 — Installing an Internal Solutions Port diagram (page 18)
Fig. 21 · Installing an Internal Solutions Port

5 Align the posts of the plastic bracket with the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 18)
Fig. 22 · Installing an Internal Solutions Port
Page 19 of the Lexmark MS810 user manual — Installing an Internal Solutions Port
Page 19 · click to enlarge
Page 19

Additional printer setup 19

6 Install the ISP on the plastic bracket.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 19)
Fig. 23 · Installing an Internal Solutions Port

7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 19)
Fig. 24 · Installing an Internal Solutions Port
Lexmark MS810 — Installing an Internal Solutions Port diagram (page 19)
Fig. 25 · Installing an Internal Solutions Port
Page 20 of the Lexmark MS810 user manual — Installing an Internal Solutions Port
Page 20 · click to enlarge
Page 20

Additional printer setup 20

8 Use the provided thumbscrew for the ISP to attach the plastic bracket to the ISP.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 20)
Fig. 26 · Installing an Internal Solutions Port

9 Attach the two provided screws to secure the ISP mounting bracket to the controller board shield.

Lexmark MS810 — Installing an Internal Solutions Port diagram (page 20)
Fig. 27 · Installing an Internal Solutions Port
Lexmark MS810 — Installing an Internal Solutions Port diagram (page 20)
Fig. 28 · Installing an Internal Solutions Port

10 Tighten the thumbscrew that is attached to the ISP.

Page 21 of the Lexmark MS810 user manual — Installing an optional card
Page 21 · click to enlarge
Page 21

Additional printer setup 21

11 Connect the ISP solution interface cable into the receptacle of the controller board.

Lexmark MS810 — Installing an optional card diagram (page 21)
Fig. 29 · Installing an optional card
Lexmark MS810 — Installing an optional card diagram (page 21)
Fig. 30 · Installing an optional card

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the optional card.

Page 22 of the Lexmark MS810 user manual — Installing an optional card
Page 22 · click to enlarge
Page 22

Additional printer setup 22

3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Lexmark MS810 — Installing an optional card diagram (page 22)
Fig. 31 · Installing an optional card
Lexmark MS810 — Installing an optional card diagram (page 22)
Fig. 32 · Installing an optional card

4 Push the card firmly into place as shown in the illustration.

Lexmark MS810 — Installing an optional card diagram (page 22)
Fig. 33 · Installing an optional card

5 Close the controller board access door.

Page 23 of the Lexmark MS810 user manual — Installing a printer hard disk
Page 23 · click to enlarge
Page 23

Additional printer setup 23

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the printer hard disk.

3 Locate the appropriate connector on the controller board cage.

Lexmark MS810 — Installing a printer hard disk diagram (page 23)
Fig. 34 · Installing a printer hard disk
Lexmark MS810 — Installing a printer hard disk diagram (page 23)
Fig. 35 · Installing a printer hard disk
Page 24 of the Lexmark MS810 user manual — Installing a printer hard disk
Page 24 · click to enlarge
Page 24

Additional printer setup 24

To install a printer hard disk onto the ISP:

a Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.

Lexmark MS810 — Installing a printer hard disk diagram (page 24)
Fig. 36 · Installing a printer hard disk

b Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk down

until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MS810 — Installing a printer hard disk diagram (page 24)
Fig. 37 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Page 25 of the Lexmark MS810 user manual — Installing a printer hard disk
Page 25 · click to enlarge
Page 25

Additional printer setup 25

Lexmark MS810 — Installing a printer hard disk diagram (page 25)
Fig. 38 · Installing a printer hard disk

To install a printer hard disk directly on the controller board cage:

a Align the standoffs of the printer hard disk to the holes in the controller board cage, and then press the printer

hard disk down until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MS810 — Installing a printer hard disk diagram (page 25)
Fig. 39 · Installing a printer hard disk
Page 26 of the Lexmark MS810 user manual — Installing a printer hard disk
Page 26 · click to enlarge
Page 26

Additional printer setup 26

b Use the two provided screws to attach the printer hard disk mounting bracket.

Lexmark MS810 — Installing a printer hard disk diagram (page 26)
Fig. 40 · Installing a printer hard disk
Lexmark MS810 — Installing a printer hard disk diagram (page 26)
Fig. 41 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the controller board.

Lexmark MS810 — Installing a printer hard disk diagram (page 26)
Fig. 42 · Installing a printer hard disk
Lexmark MS810 — Installing a printer hard disk diagram (page 26)
Fig. 43 · Installing a printer hard disk
Page 27 of the Lexmark MS810 user manual — Removing a printer hard disk
Page 27 · click to enlarge
Page 27

Additional printer setup 27

Removing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unplug the printer hard disk interface cable from the controller board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling out the cable.

Page 28 of the Lexmark MS810 user manual — Removing a printer hard disk
Page 28 · click to enlarge
Page 28

Additional printer setup 28

3 Remove the screws holding the printer hard disk in place.

4 Remove the printer hard disk.

Lexmark MS810 — Removing a printer hard disk diagram (page 28)
Fig. 44 · Removing a printer hard disk

5 Set aside the printer hard disk.

Page 29 of the Lexmark MS810 user manual — Installing optional trays
Page 29 · click to enlarge
Page 29

Additional printer setup 29

Installing hardware options

Order of installation

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Install the printer and any hardware options you have purchased in the following order:

  • Caster base
  • 2100 ‑ sheet tray or spacer
  • Optional 550 ‑ or 250 ‑ sheet tray
  • Printer

For more information on installing a caster base, optional 550‑ or 250‑sheet tray, spacer, or 2100‑sheet tray, see the setup sheet that came with the option.

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Page 30 of the Lexmark MS810 user manual — Installing hardware options
Page 30 · click to enlarge
Page 30

Additional printer setup 30

Lexmark MS810 — Installing hardware options diagram (page 30)
Fig. 45 · Installing hardware options
Lexmark MS810 — Installing hardware options diagram (page 30)
Fig. 46 · Installing hardware options

2 Unpack the optional tray, and then remove all packing material.

3 Pull out the tray completely from the base.

Lexmark MS810 — Installing hardware options diagram (page 30)
Fig. 47 · Installing hardware options
Lexmark MS810 — Installing hardware options diagram (page 30)
Fig. 48 · Installing hardware options

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

7 Align the optional tray with the caster base.

Page 31 of the Lexmark MS810 user manual — Installing hardware options
Page 31 · click to enlarge
Page 31

Additional printer setup 31

Lexmark MS810 — Installing hardware options diagram (page 31)
Fig. 49 · Installing hardware options

8 Align the printer with the tray, and then slowly lower the printer into place.

Page 32 of the Lexmark MS810 user manual — Installing hardware options
Page 32 · click to enlarge
Page 32

Additional printer setup 32

Lexmark MS810 — Installing hardware options diagram (page 32)
Fig. 50 · Installing hardware options

9 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Page 33 of the Lexmark MS810 user manual — Attaching cables
Page 33 · click to enlarge
Page 33

Additional printer setup 33

Lexmark MS810 — Attaching cables diagram (page 33)
Fig. 51 · Attaching cables
Lexmark MS810 — Attaching cables diagram (page 33)
Fig. 52 · Attaching cables
Lexmark MS810 — Attaching cables diagram (page 33)
Fig. 53 · Attaching cables

To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.

Attaching cables

Connect the printer to the computer using a USB cable or Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port
  • The appropriate parallel cable with the parallel port
Page 34 of the Lexmark MS810 user manual — Organizing the cables
Page 34 · click to enlarge
Page 34

Additional printer setup 34

Lexmark MS810 — Attaching cables diagram (page 34)
Fig. 54 · Attaching cables
Lexmark MS810 — Attaching cables diagram (page 34)
Fig. 55 · Attaching cables
Lexmark MS810 — Attaching cables diagram (page 34)
Fig. 56 · Attaching cables
Lexmark MS810 — Attaching cables diagram (page 34)
Fig. 57 · Attaching cables

1 Parallel port Connect the printer to a computer.

2 USB port Attach an optional wireless network adapter.

3 Ethernet port Connect the printer to a network.

4 USB printer port Connect the printer to a computer.

5 Security slot Attach a lock that will secure the controller board.

6 Printer power cord socket Connect the printer to a properly grounded electrical outlet.

Organizing the cables

After attaching the Ethernet cable and power cord, neatly tuck the cables in the channels at the back of the printer.

Page 35 of the Lexmark MS810 user manual — In Windows 8
Page 35 · click to enlarge
Page 35

Additional printer setup 35

Lexmark MS810 — Setting up the printer software diagram (page 35)
Fig. 58 · Setting up the printer software
Lexmark MS810 — Setting up the printer software diagram (page 35)
Fig. 59 · Setting up the printer software

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.
  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

Page 36 of the Lexmark MS810 user manual — For Windows users
Page 36 · click to enlarge
Page 36

Additional printer setup 36

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop.

3 Click Install, and then follow the instructions on the computer screen.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

a Click · In Windows 8 · a Click

Page 37 of the Lexmark MS810 user manual — For Windows users
Page 37 · click to enlarge
Page 37

Additional printer setup 37

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

Networking

  • Purchase a MarkNet N8350 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X-RADIUS are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

Page 38 of the Lexmark MS810 user manual — For Macintosh users
Page 38 · click to enlarge
Page 38

Additional printer setup 38

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to:

Apps list > Run > type: D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when installation is complete.

4 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax

In Windows 8 · a Click

Page 39 of the Lexmark MS810 user manual — Preparing to set up the printer on a wireless network
Page 39 · click to enlarge
Page 39

Additional printer setup 39

b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

Page 40 of the Lexmark MS810 user manual — •
Page 40 · click to enlarge
Page 40

Additional printer setup 40

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Connecting the printer to a network using the Wireless Setup Wizard

Before you begin, make sure that:

  • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • The Ethernet cable is disconnected from the printer.
  • Active NIC is set to Auto. To set this to Auto, navigate to one of the following:

– > Settings > > Network/Ports > > Active NIC > > Auto >

> Network/Ports > Active NIC > Auto

> Network/Ports > Active NIC > Auto > Submit

1 From the printer control panel, navigate to one of the following:

  • > Settings > > Network/Ports > > Network [x] > > Network [x] Setup > > Wireless >

> Wireless Connection Setup >

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

2 Select a wireless connection setup.

Search for networks Show available wireless connections.

Enter a network name Manually enter the SSID.

Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.

3 Follow the instructions on the printer display.

Use To

Page 41 of the Lexmark MS810 user manual — Connecting the printer to a wireless network using the Embedded Web Server
Page 41 · click to enlarge
Page 41

Additional printer setup 41

Connecting the printer to a wireless network using the Wi-Fi Protected Setup

Before connecting the printer to a wireless network, make sure that:

  • The access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter installed in your printer is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

Using the Push Button Configuration method

1 Depending on your printer model, navigate to either of the following:

  • > Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > > Wireless >

> Wi‑Fi Protected Setup > > Start Push Button Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

2 Follow the instructions on the printer display.

Using the Personal Identification Number (PIN) method

1 Depending on your printer model, navigate to either of the following:

  • > Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > > Wireless >

> Wi‑Fi Protected Setup > > Start PIN Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start PIN Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start PIN Method

2 Copy the eight–digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

  • Your printer is connected temporarily to an Ethernet network.
  • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
Page 42 of the Lexmark MS810 user manual — For Windows users
Page 42 · click to enlarge
Page 42

Additional printer setup 42

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.

Changing port settings after installing a new network Internal Solutions Port

When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.

  • If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
  • If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes to your computer configurations.
  • If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network when you configure the printer to operate wirelessly. If the printer is connected to the Ethernet network, then the wireless configuration completes, but the wireless ISP is inactive. To activate the wireless ISP, disconnect the printer from the Ethernet network, turn off the printer, and then turn it back on.
  • Only one network connection is active at a time. To switch between Ethernet and wireless connection types, turn off the printer, connect the cable (to switch to an Ethernet connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on.

For Windows users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open the printers folder.

Page 43 of the Lexmark MS810 user manual — For Macintosh users
Page 43 · click to enlarge
Page 43

Additional printer setup 43

From the Search charm, type Run and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 3 To select the printer that has changed, do either of the following:
  • Press and hold the printer, and then select Printer properties .
  • Right ‑ click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).

4 Click the Ports tab.

5 Select the port from the list, and then click Configure Port.

6 Type the new IP address in the “Printer Name or IP Address” field.

7 Click OK > Close.

For Macintosh users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select the printer > Add

In Windows 8 · a Click

Page 44 of the Lexmark MS810 user manual — In Windows 7 or earlier
Page 44 · click to enlarge
Page 44

Additional printer setup 44

Setting up serial printing

Use serial printing to print when the computer is far from the printer or to print at a reduced speed.

After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer.

1 Set the parameters in the printer. a From the printer control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Save the modified settings, and then print a menu settings page.

2 Install the printer driver. a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the software installer package.

Wait for the installation dialog to appear. If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type D:\setup.exe. 3 Press Enter or click OK.

f From the Configure Printer Connection dialog, select a port. g If the port is not in the list, then click Refresh, or navigate to:

Add port > select a port type > enter the necessary information > OK h Click Continue > Finish.

3 Set the COM port parameters.

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.

1 Click

Page 45 of the Lexmark MS810 user manual — Verifying printer setup
Page 45 · click to enlarge
Page 45

Additional printer setup 45

In Windows 8

From the Search charm, type run and then navigate to: Apps list > Run > type devmgmt.msc > OK

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports.

c Do either of the following:

  • Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
  • Right ‑ click the COM port where you attached the serial cable to your computer (example: COM1). d From the menu that appears, select Properties . e On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.

Check the serial heading of the menu settings page for the printer settings. f Click OK, and then close all the dialogs. g Print a test page to verify printer installation.

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.

For more information, see the following:

– “Printing a menu settings page” on page 78 for non‑touch‑screen printer models – “Printing a menu settings page” on page 128 or “Printing a menu settings page” on page 177 for touch‑screen

printer models • Network setup page—Use this page to verify the network connection. This page also provides important information that aids network printing configuration.

For more information, see the following:

– “Printing a network setup page” on page 79 for non‑touch‑screen printer models – “Printing a network setup page” on page 128 or “Printing a network setup page” on page 178 for touch‑screen

1 Click · printer models

Page 46 of the Lexmark MS810 user manual — Fully configured model
Page 46 · click to enlarge
Page 46

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 46

Lexmark MS810 — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn diagram (page 46)
Fig. 60 · Using MS810n, MS810dn, MS811n, MS811dn, MS812dn

Learning about the printer

Printer configurations

Basic model

Lexmark MS810 — Basic model diagram (page 46)
Fig. 61 · Basic model
Lexmark MS810 — Basic model diagram (page 46)
Fig. 62 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

1 Standard bin · 3 Multipurpose feeder

Page 47 of the Lexmark MS810 user manual — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn
Page 47 · click to enlarge
Page 47

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 47

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit http://support.lexmark.com.

Lexmark MS810 — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn diagram (page 47)
Fig. 63 · Using MS810n, MS810dn, MS811n, MS811dn, MS812dn
Lexmark MS810 — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn diagram (page 47)
Fig. 64 · Using MS810n, MS810dn, MS811n, MS811dn, MS812dn

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • 2 4 ‑ bin mailbox
  • Output expander
  • High ‑ capacity output expander
  • Staple finisher

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

In a configuration with two or more optional finishers:

  • The staple finisher must always be on top.
  • The high ‑ capacity output expander must always be at the bottom.
  • The output expander is the only finisher that can be placed on top of the high ‑ capacity output expander.
  • The output expander and mailbox may be installed in any order.
Page 48 of the Lexmark MS810 user manual — Using the printer control panel
Page 48 · click to enlarge
Page 48

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 48

When using optional trays:

  • Always use a caster base when the printer is configured with a 2100 ‑ sheet tray.
  • The 2100 ‑ sheet tray must always be at the bottom of a configuration.
  • A maximum of four optional trays may be configured with the printer.
  • The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4 5

Lexmark MS810 — Using the printer control panel diagram (page 48)
Fig. 65 · Using the printer control panel

6 7 8 9 10

Lexmark MS810 — Using the printer control panel diagram (page 48)
Fig. 66 · Using the printer control panel
  • 1 Display
  • View the printer status.
  • Set up and operate the printer.

2 Select button Submit changes made in the printer settings.

3 Arrow buttons Scroll up and down or left and right.

5 Sleep button Enable Sleep mode or Hibernate mode.

Do the following to wake the printer from Sleep mode:

  • Press any hard button.
  • Pull out Tray 1 or load paper in the multipurpose feeder.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to the USB port on the printer.

6 Stop or Cancel button Stop all printer activity.

9 Indicator light Check the status of the printer.

10 USB port Connect a flash drive to the printer.

Page 49 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 49 · click to enlarge
Page 49

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 49

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light color and its corresponding printer status

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 270 and “Storing paper” on page 191.

Setting the paper size and type

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Paper Size/Type >

2 Press the up or down arrow button to select the tray or feeder, and then press .

3 Press the up or down arrow button to select the paper size, and then press .

4 Press the up or down arrow button to select the paper type, and then press to change the settings.

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

Page 50 of the Lexmark MS810 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 50 · click to enlarge
Page 50

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 50

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

From the printer control panel, navigate to:

> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select unit of

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and pull it out completely.
  • Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Lexmark MS810 — Loading the 250 ‑ or 550 ‑ sheet tray diagram (page 50)
Fig. 67 · Loading the 250 ‑ or 550 ‑ sheet tray

measure >

Page 51 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 51 · click to enlarge
Page 51

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 51

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 51)
Fig. 68 · Loading the 250or 550-sheet tray
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 51)
Fig. 69 · Loading the 250or 550-sheet tray
Page 52 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 52 · click to enlarge
Page 52

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 52

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 52)
Fig. 70 · Loading the 250or 550-sheet tray
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 52)
Fig. 71 · Loading the 250or 550-sheet tray
Page 53 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 53 · click to enlarge
Page 53

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 53

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 53)
Fig. 72 · Loading the 250or 550-sheet tray

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 53)
Fig. 73 · Loading the 250or 550-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 53)
Fig. 74 · Loading the 250or 550-sheet tray
Page 54 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 54 · click to enlarge
Page 54

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 54

  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 54)
Fig. 75 · Loading the 250or 550-sheet tray
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 54)
Fig. 76 · Loading the 250or 550-sheet tray
Page 55 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 55 · click to enlarge
Page 55

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 55

  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 55)
Fig. 77 · Loading the 250or 550-sheet tray
Page 56 of the Lexmark MS810 user manual — Loading the 250or 550-sheet tray
Page 56 · click to enlarge
Page 56

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 56

  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 56)
Fig. 78 · Loading the 250or 550-sheet tray

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

Lexmark MS810 — Loading the 250or 550-sheet tray diagram (page 56)
Fig. 79 · Loading the 250or 550-sheet tray

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 57 of the Lexmark MS810 user manual — Loading the 2100 ‑ sheet tray
Page 57 · click to enlarge
Page 57

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 57

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS810 — Loading the 2100 ‑ sheet tray diagram (page 57)
Fig. 80 · Loading the 2100 ‑ sheet tray
Lexmark MS810 — Loading the 2100 ‑ sheet tray diagram (page 57)
Fig. 81 · Loading the 2100 ‑ sheet tray
Page 58 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 58 · click to enlarge
Page 58

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 58

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 58)
Fig. 82 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 58)
Fig. 83 · Loading the 2100-sheet tray
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 58)
Fig. 84 · Loading the 2100-sheet tray

d Insert the A5 length guide into its designated slot.

Page 59 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 59 · click to enlarge
Page 59

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 59

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 59)
Fig. 85 · Loading the 2100-sheet tray
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 59)
Fig. 86 · Loading the 2100-sheet tray

Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 59)
Fig. 87 · Loading the 2100-sheet tray
Page 60 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 60 · click to enlarge
Page 60

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 60

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide

is not attached, then proceed to step d.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 60)
Fig. 88 · Loading the 2100-sheet tray

c Put the A5 length guide in its holder.

Page 61 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 61 · click to enlarge
Page 61

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 61

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks

into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 61)
Fig. 89 · Loading the 2100-sheet tray

3 Flex and fan the sheets to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 61)
Fig. 90 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways for loading letterhead depending on whether an optional staple finisher is installed or not.
Page 62 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 62 · click to enlarge
Page 62

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 62

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 62)
Fig. 91 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 62)
Fig. 92 · Loading the 2100-sheet tray
Page 63 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 63 · click to enlarge
Page 63

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 63

  • Make sure the paper is below the maximum paper fill indicator.
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 63)
Fig. 93 · Loading the 2100-sheet tray
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 63)
Fig. 94 · Loading the 2100-sheet tray

5 Insert the tray.

Page 64 of the Lexmark MS810 user manual — B5
Page 64 · click to enlarge
Page 64

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 64

Lexmark MS810 — Loading the multipurpose feeder diagram (page 64)
Fig. 95 · Loading the multipurpose feeder

6 From the printer control panel, set the size and type in the Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS810 — Loading the multipurpose feeder diagram (page 64)
Fig. 96 · Loading the multipurpose feeder

B5

EXEC

A4 A5

LTR

Page 65 of the Lexmark MS810 user manual — LTR
Page 65 · click to enlarge
Page 65

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 65

2 Pull the multipurpose feeder extender.

Lexmark MS810 — Loading the multipurpose feeder diagram (page 65)
Fig. 97 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — A4 A5 diagram (page 65)
Fig. 98

LTR

A4 A5

EXEC

B5

Page 66 of the Lexmark MS810 user manual — EXEC
Page 66 · click to enlarge
Page 66

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 66

Lexmark MS810 — Loading the multipurpose feeder diagram (page 66)
Fig. 99 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — EXEC diagram (page 66)
Fig. 100
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Page 67 of the Lexmark MS810 user manual — ABC
Page 67 · click to enlarge
Page 67

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 67

5 Load paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

Lexmark MS810 — Loading the multipurpose feeder diagram (page 67)
Fig. 101 · Loading the multipurpose feeder

ABC

ABC

One‑sided printing

One‑sided printing

Lexmark MS810 — ABC diagram (page 67)
Fig. 102

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

Lexmark MS810 — ABC diagram (page 67)
Fig. 103

ABC

Page 68 of the Lexmark MS810 user manual — A4 A5
Page 68 · click to enlarge
Page 68

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 68

  • Load envelopes with the flap side down and on the left of the multipurpose feeder.
Lexmark MS810 — Loading the multipurpose feeder diagram (page 68)
Fig. 104 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

Lexmark MS810 — A4 A5 diagram (page 68)
Fig. 105
Lexmark MS810 — A4 A5 diagram (page 68)
Fig. 106

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 69 of the Lexmark MS810 user manual — Creating a custom name for a paper type
Page 69 · click to enlarge
Page 69

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 69

Linking and unlinking trays

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel in the TCP/IP section under the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a new custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Custom Names

2 Select a custom name, and then type a new custom paper type name.

Page 70 of the Lexmark MS810 user manual — Printing a document
Page 70 · click to enlarge
Page 70

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 70

3 Press .

4 Press Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Press .

Printing

Printing a document

Printing a document

1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Windows users

Page 71 of the Lexmark MS810 user manual — Supported flash drives and file types
Page 71 · click to enlarge
Page 71

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 71

a Customize the settings in the Page Setup dialog if necessary:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Page Setup dialog if necessary:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus adjust the settings if necessary.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the IP address of the printer in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness, and then click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Print Settings > > Quality Menu > > Toner Darkness

2 Adjust the toner darkness, and then press .

Printing from a flash drive

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

For Macintosh users

Page 72 of the Lexmark MS810 user manual — Printing from a flash drive
Page 72 · click to enlarge
Page 72

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 72

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark MS810 — Printing from a flash drive diagram (page 72)
Fig. 107 · Printing from a flash drive
Lexmark MS810 — Printing from a flash drive diagram (page 72)
Fig. 108 · Printing from a flash drive
  • A flash drive icon appears on the printer control panel and in the held jobs icon when a flash drive is installed.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
Page 73 of the Lexmark MS810 user manual — Storing print jobs in the printer
Page 73 · click to enlarge
Page 73

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 73

  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, select the document you want to print.

3 Press the left or right arrow button to specify the number of copies for printing, and then press .

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then access held jobs from the printer control panel to print files from the flash drive.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the printer control panel, navigate to:

> Settings > > Security > > Confidential Print > select the print job type

Page 74 of the Lexmark MS810 user manual — Printing confidential and other held jobs
Page 74 · click to enlarge
Page 74

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 74

Print job type Description

Max Invalid PIN Limits the number of times an invalid PIN can be entered.

Confidential Job Expiration Lets you hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Lets you print and store print jobs in the printer memory for reprinting.

Verify Job Expiration Lets you print one copy of a print job while the printer holds the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory once all copies are printed.

Reserve Job Expiration Lets you store print jobs for printing at a later time. The print jobs are held until deleted from the Held Jobs menu.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

2 Press .

Printing confidential and other held jobs

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

  • 6 From the printer control panel, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > select the print job > specify the number of copies > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

For Windows users

Page 75 of the Lexmark MS810 user manual — Canceling a print job from the printer control panel
Page 75 · click to enlarge
Page 75

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 75

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

  • 5 From the printer control panel, release the print job:
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > select the print job > specify the number of copies > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Printing information pages

Printing a font sample list

1 From the printer control panel, navigate to:

> Settings > > Reports > > Print Fonts

2 Press the up or down arrow button to select the font setting.

3 Press .

Printing a directory list

From the printer control panel, navigate to:

> Settings > Reports > > Print Directory >

Canceling a print job

Canceling a print job from the printer control panel

From the printer control panel, press > .

For Macintosh users

Page 76 of the Lexmark MS810 user manual — Checking the virtual display
Page 76 · click to enlarge
Page 76

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 76

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type Run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears at the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

In Windows 8 · a Click

Page 77 of the Lexmark MS810 user manual — Modifying confidential print settings
Page 77 · click to enlarge
Page 77

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 77

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Notification Description

Page 78 of the Lexmark MS810 user manual — Printing a menu settings page
Page 78 · click to enlarge
Page 78

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 78

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Configuration > Other Settings tab > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within the specified time, all of the jobs for that user are deleted.

4 Save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click the Copy Printer Settings.

3 To change the language, select a language from the drop-down menu, and then click Click here to submit language.

4 Click Printer Settings.

5 Type the IP addresses of the source and target printers in their appropriate fields.

6 Click Copy Printer Settings.

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.

From the printer control panel, navigate to:

> Settings > >Reports > > Menu Settings Page >

Page 79 of the Lexmark MS810 user manual — Saving energy
Page 79 · click to enlarge
Page 79

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 79

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the printer control panel, navigate to:

> Settings > > Reports > > Network Setup Page >

2 Check the first section of the network setup page, and then confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

  • Each gauge displays the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the printer control panel, navigate to:

> Status/Supplies > View Supplies >

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 80 of the Lexmark MS810 user manual — Reducing printer noise
Page 80 · click to enlarge
Page 80

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 80

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce the printer noise.

1 From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Quiet Mode >

2 Select a setting.

Use To

Page 81 of the Lexmark MS810 user manual — Adjusting Sleep mode
Page 81 · click to enlarge
Page 81

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 81

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer ignores the Advance Start command.

Off Use factory default settings.

3 Press .

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Navigate to:

Settings > General Settings > Timeouts

3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode >

2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.

3 Press .

Use To

Page 82 of the Lexmark MS810 user manual — Adjusting the brightness of the printer display
Page 82 · click to enlarge
Page 82

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 82

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

  • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If your are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Settings > > General Settings >

2 Press the arrow buttons until Press Sleep Button or Press and Hold Sleep Button appears, and

then press .

3 Press the arrow buttons until Hibernate appears, and then press .

  • When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode.
  • When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode.

Adjusting the brightness of the printer display

To save energy, or if you have trouble reading the display, adjust its brightness settings.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Page 83 of the Lexmark MS810 user manual — Restoring factory default settings
Page 83 · click to enlarge
Page 83

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 83

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 78.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 85.

From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Factory Defaults > > Restore Now >

Page 84 of the Lexmark MS810 user manual — Statement of Volatility
Page 84 · click to enlarge
Page 84

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 84

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Lexmark MS810 — Using the security lock feature diagram (page 84)
Fig. 109 · Using the security lock feature
Lexmark MS810 — Using the security lock feature diagram (page 84)
Fig. 110 · Using the security lock feature

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
Page 85 of the Lexmark MS810 user manual — Erasing volatile memory
Page 85 · click to enlarge
Page 85

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 85

  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, turn off the printer.

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Press the up or down arrow button until Wipe All Settings appears.

The printer will restart several times during this process.

4 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Page 86 of the Lexmark MS810 user manual — Configuring printer hard disk encryption
Page 86 · click to enlarge
Page 86

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 86

Erasing printer hard disk memory

Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Press the up or down arrow button until Wipe Disk appears, and then select one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Press the up or down arrow button until Yes appears, and then proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk Encryption menu, select Enable.

Page 87 of the Lexmark MS810 user manual — Finding printer security information
Page 87 · click to enlarge
Page 87

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn 87

  • Enabling disk encryption will erase the content of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Navigate to:

Disk Encryption > Enable

4 Select Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the screen for enabling or disabling disk encryption.

5 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page or see the Embedded Web Server Administrator’s Guide.

1 Go to http://support.lexmark.com, and then navigate to:

Support & Downloads > Tech Library > Manuals & Guides

2 In the Keyword field, type Embedded Web Server, and then click Filter.

3 Click Embedded Web Server to launch the document.

Page 88 of the Lexmark MS810 user manual — Fully configured model
Page 88 · click to enlarge
Page 88

Using MS810de

Learning about the printer

Printer configurations

Basic model

Lexmark MS810 — Basic model diagram (page 88)
Fig. 111 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

Using MS810de 88 · 1 Standard bin · 3 Multipurpose feeder

Page 89 of the Lexmark MS810 user manual — Using MS810de
Page 89 · click to enlarge
Page 89

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MS810 — Using MS810de diagram (page 89)
Fig. 112 · Using MS810de
Lexmark MS810 — Using MS810de diagram (page 89)
Fig. 113 · Using MS810de

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • 2 4 ‑ bin mailbox
  • Output expander
  • High ‑ capacity output expander
  • Staple finisher

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

  • In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.
  • In a configuration with two optional finishers: – The staple finisher must always be on top. – The high ‑ capacity output expander must always be at the bottom. – The output expander is the only finisher that can be placed on top of the high ‑ capacity output expander.

Using MS810de 89

Page 90 of the Lexmark MS810 user manual — Understanding the colors of the Sleep button and indicator lights
Page 90 · click to enlarge
Page 90
  • When using optional trays: – Always use a caster base when the printer is configured with a 2100 ‑ sheet tray. – The 2100 ‑ sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4

Lexmark MS810 — Using the printer control panel diagram (page 90)
Fig. 114 · Using the printer control panel
Lexmark MS810 — Using the printer control panel diagram (page 90)
Fig. 115 · Using the printer control panel
  • 1 Display
  • View the printer status.
  • Set up and operate the printer.

3 Sleep button Enable Sleep mode or Hibernate mode. Do the following to wake the printer from Sleep Mode:

  • Press any hard button.
  • Pull out Tray 1 or load paper in the multipurpose feeder.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to the USB port on the printer.

5 Stop or Cancel button Stop all printer activity.

6 Indicator light Check the status of the printer.

7 USB port Connect a flash drive to the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Using MS810de 90

Page 91 of the Lexmark MS810 user manual — Understanding the home screen
Page 91 · click to enlarge
Page 91

Indicator light color and its corresponding printer status

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark MS810 — Understanding the home screen diagram (page 91)
Fig. 116 · Understanding the home screen

5 6 7 8

1 Change Language Change the primary language of the printer.

2 Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.

3 Held Jobs Display all current held jobs.

Using MS810de 91 · Touch To

Page 92 of the Lexmark MS810 user manual — Using the touch-screen buttons
Page 92 · click to enlarge
Page 92

4 USB View, select, or print photos and documents from a flash drive.

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Imaging unit low or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

8 Tips View a context‑sensitive help information.

This may also appear on the home screen:

Search Held Jobs Search current held jobs.

Jobs by user Access print jobs saved by user.

Profiles and Solutions Access profiles and solutions.

Features

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

The IP address of your printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server to view and remotely configure printer settings even when you are not physically near the printer.

Example123.123.123.123

Using the touch-screen buttons

Show 6 more labels / short text on this page
Using MS810de 92 · Touch To · Touch To · Feature Description · Attendance message alert · Printer IP address
Page 93 of the Lexmark MS810 user manual — Other touch-screen buttons
Page 93 · click to enlarge
Page 93
Lexmark MS810 — Using the touch-screen buttons diagram (page 93)
Fig. 117 · Using the touch-screen buttons

1 Radio button Select or clear an item.

2 Up arrow Scroll up.

3 Down arrow Scroll down.

4 Accept button Save a setting.

  • 5 Cancel button
  • Cancel an action or a selection.
  • Return to the previous screen.

Other touch-screen buttons

Return to the home screen.

Open a context-sensitive Help dialog on the printer control panel.

Scroll to the left.

Scroll to the right.

Using MS810de 93 · Touch the To · Touch To

Page 94 of the Lexmark MS810 user manual — For Macintosh users
Page 94 · click to enlarge
Page 94

Setting up and using the home screen applications

  • Your home screen may vary, depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models.
  • There may be additional solutions and applications available for purchase. For more information, visit <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or inquire at your point of purchase.

Finding the IP address of the computer

The computer IP address is required when setting up home screen applications, such as:

  • Forms and Favorites
  • Multi Send
  • Scan to Network

For Windows users

1 Open the command window.

From the Search charm, type run, and then navigate to:

Apps list > Run > type cmd > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type cmd.

c Press Enter, or click OK.

2 Type ipconfig, and then click Go or press Enter.

3 Look for IP Address.

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Network

2 Click Ethernet, Wi‑Fi, or AirPort.

3 Click Advanced > TCP/IP.

4 Look for IPv4 Address.

Using MS810de 94 · In Windows 8 · a Click

Page 95 of the Lexmark MS810 user manual — Customizing the home screen
Page 95 · click to enlarge
Page 95

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide the icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the home screen.

Using MS810de 95

Page 96 of the Lexmark MS810 user manual — Setting up Forms and Favorites
Page 96 · click to enlarge
Page 96

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 95.

For more information on configuring and using the home screen applications, do the following:

  • 1 Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then do either of the following:
  • Click Business Solutions , and then select the name of the application.
  • Click Software and Solutions , and then select either of the following: – Scan to Network —Find information about the Scan to Network application. – Other Applications —Find information about the other applications.

2 Click the Manuals tab, and then select the document for the home screen application.

Using Background and Idle Screen

The application lets you customize the background and idle screen of your printer home screen.

Lexmark MS810 — Using Background and Idle Screen diagram (page 96)
Fig. 118 · Using Background and Idle Screen

1 From the home screen, navigate to:

Change Background > select background to use

Setting up Forms and Favorites

Lexmark MS810 — Setting up Forms and Favorites diagram (page 96)
Fig. 119 · Setting up Forms and Favorites

Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen.

Show 4 more labels / short text on this page
Using MS810de 96 · Icon Description · 2 Touch · Use To
Page 97 of the Lexmark MS810 user manual — Setting up Remote Operator Panel
Page 97 · click to enlarge
Page 97

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 94.
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Understanding Eco‑Settings

The application lets you easily manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Lexmark MS810 — Understanding Eco-Settings diagram (page 97)
Fig. 120 · Understanding Eco-Settings

Setting up Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the network printer.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

3 Select the Enabled check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Using MS810de 97 · Icon Description

Page 98 of the Lexmark MS810 user manual — Setting the paper size and type
Page 98 · click to enlarge
Page 98

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration file is

saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 270 and “Storing paper” on page 191.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Using MS810de 98

Page 99 of the Lexmark MS810 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 99 · click to enlarge
Page 99

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and pull it out completely.
  • Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Lexmark MS810 — Loading the 250 ‑ or 550 ‑ sheet tray diagram (page 99)
Fig. 121 · Loading the 250 ‑ or 550 ‑ sheet tray

Using MS810de 99

Page 100 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 100 · click to enlarge
Page 100

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS810 — Configuring Universal paper settings diagram (page 100)
Fig. 122 · Configuring Universal paper settings
Lexmark MS810 — Configuring Universal paper settings diagram (page 100)
Fig. 123 · Configuring Universal paper settings

Using MS810de 100

Page 101 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 101 · click to enlarge
Page 101

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Configuring Universal paper settings diagram (page 101)
Fig. 124 · Configuring Universal paper settings
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.
Lexmark MS810 — Configuring Universal paper settings diagram (page 101)
Fig. 125 · Configuring Universal paper settings

Using MS810de 101

Page 102 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 102 · click to enlarge
Page 102

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Configuring Universal paper settings diagram (page 102)
Fig. 126 · Configuring Universal paper settings

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS810 — Configuring Universal paper settings diagram (page 102)
Fig. 127 · Configuring Universal paper settings

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Configuring Universal paper settings diagram (page 102)
Fig. 128 · Configuring Universal paper settings

Using MS810de 102

Page 103 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 103 · click to enlarge
Page 103
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS810 — Configuring Universal paper settings diagram (page 103)
Fig. 129 · Configuring Universal paper settings
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.

Using MS810de 103

Page 104 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 104 · click to enlarge
Page 104
  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS810 — Configuring Universal paper settings diagram (page 104)
Fig. 130 · Configuring Universal paper settings

Using MS810de 104

Page 105 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 105 · click to enlarge
Page 105
  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS810 — Configuring Universal paper settings diagram (page 105)
Fig. 131 · Configuring Universal paper settings

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Using MS810de 105

Page 106 of the Lexmark MS810 user manual — Loading the 2100 ‑ sheet tray
Page 106 · click to enlarge
Page 106

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS810 — Loading the 2100 ‑ sheet tray diagram (page 106)
Fig. 132 · Loading the 2100 ‑ sheet tray

Using MS810de 106

Page 107 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 107 · click to enlarge
Page 107

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 107)
Fig. 133 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

d Insert the A5 length guide into its designated slot.

Using MS810de 107

Page 108 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 108 · click to enlarge
Page 108

Loading A4‑, letter‑, legal‑, Oficio‑, and Folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 108)
Fig. 134 · Loading the 2100-sheet tray

Using MS810de 108

Page 109 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 109 · click to enlarge
Page 109

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide

is not attached, then proceed to step d.

c Put the A5 length guide in its holder.

Using MS810de 109

Page 110 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 110 · click to enlarge
Page 110

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks

into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 110)
Fig. 135 · Loading the 2100-sheet tray

3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 110)
Fig. 136 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Using MS810de 110

Page 111 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 111 · click to enlarge
Page 111
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 111)
Fig. 137 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 111)
Fig. 138 · Loading the 2100-sheet tray

Using MS810de 111

Page 112 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 112 · click to enlarge
Page 112
  • Make sure the paper is below the maximum paper fill indicator.

5 Insert the tray.

Using MS810de 112

Page 113 of the Lexmark MS810 user manual — A4 A5
Page 113 · click to enlarge
Page 113

6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS810 — Loading the multipurpose feeder diagram (page 113)
Fig. 139 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

Using MS810de 113

Page 114 of the Lexmark MS810 user manual — LTR
Page 114 · click to enlarge
Page 114

2 Pull the multipurpose feeder extender.

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

LTR

A4 A5

EXEC

B5

Using MS810de 114

Page 115 of the Lexmark MS810 user manual — EXEC
Page 115 · click to enlarge
Page 115
Lexmark MS810 — Loading the multipurpose feeder diagram (page 115)
Fig. 140 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — EXEC diagram (page 115)
Fig. 141
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

Using MS810de 115

Page 116 of the Lexmark MS810 user manual — ABC
Page 116 · click to enlarge
Page 116

5 Load the paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

ABC

ABC

One‑sided printing

One‑sided printing

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

ABC

Using MS810de 116

Page 117 of the Lexmark MS810 user manual — A4 A5
Page 117 · click to enlarge
Page 117
  • Load envelopes with the flap side down and on the left of the multipurpose feeder.

A4 A5

LTR

B5

EXEC

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the Paper menu on the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Using MS810de 117

Page 118 of the Lexmark MS810 user manual — Creating a custom name for a paper type
Page 118 · click to enlarge
Page 118

Linking and unlinking trays

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

Using MS810de 118

Page 119 of the Lexmark MS810 user manual — Printing forms
Page 119 · click to enlarge
Page 119

4 Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type

Printing

Printing a document

Printing forms

Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 96.

1 From the printer home screen, navigate to:

Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings

2 Depending on your printer model, touch

, or Submit.

Show 4 more labels / short text on this page
Using MS810de 119 · 3 Touch · 3 Touch · ,
Page 120 of the Lexmark MS810 user manual — Adjusting toner darkness
Page 120 · click to enlarge
Page 120

Printing a document

1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the setting, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch

Using MS810de 120 · For Windows users · For Macintosh users

Page 121 of the Lexmark MS810 user manual — Supported flash drives and file types
Page 121 · click to enlarge
Page 121

Printing from a flash drive

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Recommended flash drives File type

Documents:

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)
  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Using MS810de 121

Page 122 of the Lexmark MS810 user manual — Printing from a flash drive
Page 122 · click to enlarge
Page 122

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark MS810 — Printing from a flash drive diagram (page 122)
Fig. 142 · Printing from a flash drive
  • A flash drive icon appears on the printer home screen when a flash drive is inserted.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, touch the document you want to print.

Using MS810de 122

Page 123 of the Lexmark MS810 user manual — Storing print jobs in the printer
Page 123 · click to enlarge
Page 123

3 Touch the arrows to specify the number of copies for printing, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the home screen, navigate to:

> Security > Confidential Print > select a print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It lets you examine if the first copy is satisfactory or not. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

Using MS810de 123 · Use To · 2 Touch

Page 124 of the Lexmark MS810 user manual — Printing a font sample list
Page 124 · click to enlarge
Page 124

Printing confidential and other held jobs

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

  • 6 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

  • 5 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Using MS810de 124 · For Windows users · For Macintosh users

Page 125 of the Lexmark MS810 user manual — For Macintosh users
Page 125 · click to enlarge
Page 125

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Jobs or press on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Using MS810de 125 · In Windows 8 · a Click

Page 126 of the Lexmark MS810 user manual — Configuring supply notifications from the Embedded Web Server
Page 126 · click to enlarge
Page 126

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears at the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Using MS810de 126 · Notification Description

Page 127 of the Lexmark MS810 user manual — Copying printer settings to other printers
Page 127 · click to enlarge
Page 127

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Configuration > Other Settings tab > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.

4 Save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Copy Printer Settings.

3 To change the language, select a language from the drop‑down menu, and then click Click here to submit language.

4 Click Printer Settings.

Using MS810de 127 · Notification Description

Page 128 of the Lexmark MS810 user manual — Checking the status of parts and supplies from the Embedded Web Server
Page 128 · click to enlarge
Page 128

5 Type the IP addresses of the source and target printers.

6 Click Copy Printer Settings.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

  • Each gauge displays the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Using MS810de 128

Page 129 of the Lexmark MS810 user manual — Reducing printer noise
Page 129 · click to enlarge
Page 129

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode.

3 Select a setting.

Using MS810de 129 · Use To

Page 130 of the Lexmark MS810 user manual — Adjusting Sleep mode
Page 130 · click to enlarge
Page 130

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer ignores the Advance Start command.

Off Use factory default settings.

4 Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep Mode.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep Mode.

Using MS810de 130 · Use To · 3 Touch

Page 131 of the Lexmark MS810 user manual — Adjusting the brightness of the display
Page 131 · click to enlarge
Page 131

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings

2 Touch Press Sleep Button or Press and Hold Sleep Button.

3 Touch Hibernate >

Adjusting the brightness of the display

To save energy, or if you are have trouble reading your display, adjust the brightness of the display.

Available settings range from 20–100. The factory default setting is 100.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Using MS810de 131

Page 132 of the Lexmark MS810 user manual — Using the security lock feature
Page 132 · click to enlarge
Page 132

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Screen Brightness

2 In the Screen Brightness field, enter the brightness percentage you want for the display.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 128.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 134.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now >

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Using MS810de 132 · 3 Touch

Page 133 of the Lexmark MS810 user manual — Erasing volatile memory
Page 133 · click to enlarge
Page 133

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Using MS810de 133

Page 134 of the Lexmark MS810 user manual — Erasing printer hard disk memory
Page 134 · click to enlarge
Page 134

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer will restart several times during this process.

4 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Using MS810de 134

Page 135 of the Lexmark MS810 user manual — Configuring printer hard disk encryption
Page 135 · click to enlarge
Page 135

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Using MS810de 135

Page 136 of the Lexmark MS810 user manual — Finding printer security information
Page 136 · click to enlarge
Page 136

Finding printer security information

In high-security environments, you may need to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page or see the Embedded Web Server Administrator’s Guide.

1 Go to http://support.lexmark.com, and then navigate to:

Support & Downloads > Tech Library > Manuals & Guides

2 Type Embedded Web Server in the keyword field, and then click Filter.

3 Click Embedded Web Server to launch the document.

Using MS810de 136

Page 137 of the Lexmark MS810 user manual — Fully configured model
Page 137 · click to enlarge
Page 137

Using MS812de

Learning about the printer

Printer configurations

Basic model

Lexmark MS810 — Basic model diagram (page 137)
Fig. 143 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

Using MS812de 137 · 1 Standard bin · 3 Multipurpose feeder

Page 138 of the Lexmark MS810 user manual — Using MS812de
Page 138 · click to enlarge
Page 138

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MS810 — Using MS812de diagram (page 138)
Fig. 144 · Using MS812de
Lexmark MS810 — Using MS812de diagram (page 138)
Fig. 145 · Using MS812de

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • 2 4 ‑ bin mailbox
  • Output expander
  • High ‑ capacity output expander
  • Staple finisher

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

  • In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.
  • In a configuration with two optional finishers: – The staple finisher must always be on top. – The high ‑ capacity output expander must always be at the bottom. – The output expander is the only finisher that can be placed on top of the high ‑ capacity output expander.

Using MS812de 138

Page 139 of the Lexmark MS810 user manual — Understanding the colors of the Sleep button and indicator lights
Page 139 · click to enlarge
Page 139
  • When using optional trays: – Always use a caster base when the printer is configured with a 2100 ‑ sheet tray. – The 2100 ‑ sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

Lexmark MS810 — Using the printer control panel diagram (page 139)
Fig. 146 · Using the printer control panel
Lexmark MS810 — Using the printer control panel diagram (page 139)
Fig. 147 · Using the printer control panel
  • 1 Display
  • View the status of the printer.
  • Set up and operate the printer.

3 Sleep button Enable Sleep mode or Hibernate mode.

Do the following to wake the printer from Sleep mode:

  • Press and release the Sleep button.
  • Touch the screen or press any hard button.
  • Open a tray, cover, or door.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to a USB port.

4 Keypad Enter numbers, letters, or symbols on the printer.

5 Stop or Cancel button Stop all printer activity.

6 Indicator light Check the status of the printer.

7 USB port Connect a USB Bluetooth adapter or a flash drive to the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Using MS812de 139

Page 140 of the Lexmark MS810 user manual — Understanding the home screen
Page 140 · click to enlarge
Page 140

Indicator light color and its corresponding printer status

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark MS810 — Understanding the home screen diagram (page 140)
Fig. 148 · Understanding the home screen

5 6 7 8

1 Search Held Jobs Search current held jobs.

2 Held Jobs Display all current held jobs.

3 Forms and Favorites Access frequently used online forms.

4 Eco‑Settings Adjust energy consumption, noise, toner and paper usage.

Using MS812de 140 · Touch To

Page 141 of the Lexmark MS810 user manual — Using the touch-screen buttons
Page 141 · click to enlarge
Page 141

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Imaging unit low or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

8 Tips Open a context‑sensitive Help information on the printer control panel.

Features

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

The IP address of your network printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server so you can view and remotely configure printer settings even when you are not physically near the printer.

Example123.123.123.123

Using the touch-screen buttons

Show 5 more labels / short text on this page
Using MS812de 141 · Touch To · Feature Description · Attendance message alert · Printer IP address
Page 142 of the Lexmark MS810 user manual — Using the touch-screen buttons
Page 142 · click to enlarge
Page 142
Lexmark MS810 — Using the touch-screen buttons diagram (page 142)
Fig. 149 · Using the touch-screen buttons

4 5 6 7 8

Scroll to the left.

Scroll to the right.

Scroll up.

Scroll down.

5 Submit Submit changes made in the printer settings.

6 Back Return to the previous screen.

Return to the home screen.

Show 7 more labels / short text on this page
Using MS812de 142 · Touch To · 1 Left arrow · 2 Right arrow · 3 Up arrow · 4 Down arrow · 7 Home
Page 143 of the Lexmark MS810 user manual — Other touch-screen buttons
Page 143 · click to enlarge
Page 143

Open a context-sensitive Help dialog on the printer control panel.

Other touch-screen buttons

Save settings.

  • Cancel an action or a selection.
  • Leave a screen and return to the previous screen without saving changes.

Select a higher value.

Select a lower value.

Leave the current screen.

Search current held jobs.

Show 10 more labels / short text on this page
Using MS812de 143 · Touch To · 8 Tips · Touch To · Accept · Cancel · Increase · Decrease · Exit · Search
Page 144 of the Lexmark MS810 user manual — Finding the IP address of the printer
Page 144 · click to enlarge
Page 144

Setting up and using the home screen applications

  • Your home screen may vary, depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models.
  • There may be additional solutions and applications available for purchase. For more information, visit <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or inquire at your point of purchase.

Finding the IP address of the computer

For Windows users

1 Open the command window.

From the Search charm, type run, and then navigate to:

Apps list > Run > type cmd > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type cmd.

c Press Enter, or click OK.

2 Type ipconfig, and then click Go or press Enter.

3 Look for IP Address.

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Network

2 Click Ethernet, Wi‑Fi, or AirPort.

3 Click Advanced > TCP/IP.

4 Look for IPv4 Address.

Finding the IP address of the printer

Using MS812de 144 · In Windows 8 · a Click

Page 145 of the Lexmark MS810 user manual — Finding information about the home screen applications
Page 145 · click to enlarge
Page 145

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the printer home screen.

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 95.

Using MS812de 145

Page 146 of the Lexmark MS810 user manual — Setting up Forms and Favorites
Page 146 · click to enlarge
Page 146

For more information on configuring and using the home screen applications, do the following:

  • 1 Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then do either of the following:
  • Click Business Solutions , and then select the name of the application.
  • Click Software and Solutions , and then select either of the following: – Scan to Network —Find information about the Scan to Network application. – Other Applications —Find information about the other applications.

2 Click the Manuals tab, and then select the document for the home screen application.

Using Background and Idle Screen

Customize the background and idle screen of your printer home screen.

From the home screen, navigate to:

Change Background > select background to use > Apply

Setting up Forms and Favorites

Quickly find and print frequently used online forms directly from the printer home screen.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.

Using MS812de 146 · Use To · Use To

Page 147 of the Lexmark MS810 user manual — Setting up Remote Operator Panel
Page 147 · click to enlarge
Page 147
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 94.
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Understanding Eco‑Settings

Manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Setting up Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally perform on the network printer.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

3 Select the Enabled check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Using MS812de 147 · Use To

Page 148 of the Lexmark MS810 user manual — Setting the paper size and type
Page 148 · click to enlarge
Page 148

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration file is

saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 270 and “Storing paper” on page 191.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select a paper size or type > Submit

Using MS812de 148

Page 149 of the Lexmark MS810 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 149 · click to enlarge
Page 149
  • The paper size is automatically set according to the position of the paper guides in each tray except the multipurpose feeder.
  • The paper size for the multipurpose feeder must be set manually from the Paper Size menu.
  • The paper type must be set manually for all trays that do not contain plain paper.

Configuring Universal paper settings

Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch Submit.

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and then pull it out completely.
  • Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.

Using MS812de 149

Page 150 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 150 · click to enlarge
Page 150
Lexmark MS810 — Configuring Universal paper settings diagram (page 150)
Fig. 150 · Configuring Universal paper settings

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS810 — Configuring Universal paper settings diagram (page 150)
Fig. 151 · Configuring Universal paper settings

Using MS812de 150

Page 151 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 151 · click to enlarge
Page 151
Lexmark MS810 — Configuring Universal paper settings diagram (page 151)
Fig. 152 · Configuring Universal paper settings

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Configuring Universal paper settings diagram (page 151)
Fig. 153 · Configuring Universal paper settings
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.

Using MS812de 151

Page 152 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 152 · click to enlarge
Page 152
Lexmark MS810 — Configuring Universal paper settings diagram (page 152)
Fig. 154 · Configuring Universal paper settings

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Configuring Universal paper settings diagram (page 152)
Fig. 155 · Configuring Universal paper settings

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS810 — Configuring Universal paper settings diagram (page 152)
Fig. 156 · Configuring Universal paper settings

Without an optional staple finisher With an optional staple finisher

Using MS812de 152

Page 153 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 153 · click to enlarge
Page 153
Lexmark MS810 — Configuring Universal paper settings diagram (page 153)
Fig. 157 · Configuring Universal paper settings

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Configuring Universal paper settings diagram (page 153)
Fig. 158 · Configuring Universal paper settings
Lexmark MS810 — Configuring Universal paper settings diagram (page 153)
Fig. 159 · Configuring Universal paper settings

Using MS812de 153

Page 154 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 154 · click to enlarge
Page 154
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS810 — Configuring Universal paper settings diagram (page 154)
Fig. 160 · Configuring Universal paper settings

Using MS812de 154

Page 155 of the Lexmark MS810 user manual — Configuring Universal paper settings
Page 155 · click to enlarge
Page 155
  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS810 — Configuring Universal paper settings diagram (page 155)
Fig. 161 · Configuring Universal paper settings

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Using MS812de 155

Page 156 of the Lexmark MS810 user manual — Loading the 2100 ‑ sheet tray
Page 156 · click to enlarge
Page 156

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS810 — Loading the 2100 ‑ sheet tray diagram (page 156)
Fig. 162 · Loading the 2100 ‑ sheet tray

Using MS812de 156

Page 157 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 157 · click to enlarge
Page 157

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 157)
Fig. 163 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

d Insert the A5 length guide into its designated slot.

Using MS812de 157

Page 158 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 158 · click to enlarge
Page 158

Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 158)
Fig. 164 · Loading the 2100-sheet tray

Using MS812de 158

Page 159 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 159 · click to enlarge
Page 159

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide

is not attached, then proceed to step d.

c Put the A5 length guide in its holder.

Using MS812de 159

Page 160 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 160 · click to enlarge
Page 160

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks

into place.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 160)
Fig. 165 · Loading the 2100-sheet tray

3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — Loading the 2100-sheet tray diagram (page 160)
Fig. 166 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Using MS812de 160

Page 161 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 161 · click to enlarge
Page 161
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 161)
Fig. 167 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS810 — Loading the 2100-sheet tray diagram (page 161)
Fig. 168 · Loading the 2100-sheet tray

Using MS812de 161

Page 162 of the Lexmark MS810 user manual — Loading the 2100-sheet tray
Page 162 · click to enlarge
Page 162
  • Make sure the paper is below the maximum paper fill indicator.

5 Insert the tray.

Using MS812de 162

Page 163 of the Lexmark MS810 user manual — B5
Page 163 · click to enlarge
Page 163

6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS810 — Loading the multipurpose feeder diagram (page 163)
Fig. 169 · Loading the multipurpose feeder

B5

EXEC

A4 A5

LTR

Using MS812de 163

Page 164 of the Lexmark MS810 user manual — LTR
Page 164 · click to enlarge
Page 164

2 Using the handle, pull the multipurpose feeder extender.

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

LTR

A4 A5

EXEC

B5

Using MS812de 164

Page 165 of the Lexmark MS810 user manual — EXEC
Page 165 · click to enlarge
Page 165
Lexmark MS810 — Loading the multipurpose feeder diagram (page 165)
Fig. 170 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS810 — EXEC diagram (page 165)
Fig. 171
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

Using MS812de 165

Page 166 of the Lexmark MS810 user manual — ABC
Page 166 · click to enlarge
Page 166

5 Load the paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat and is not bent or wrinkled.
  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

ABC

ABC

One‑sided printing

One‑sided printing

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

ABC

Using MS812de 166

Page 167 of the Lexmark MS810 user manual — A4 A5
Page 167 · click to enlarge
Page 167
  • Load envelopes with the flap side down and on the left of the multipurpose feeder.

A4 A5

LTR

B5

EXEC

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Using MS812de 167

Page 168 of the Lexmark MS810 user manual — Creating a custom name for a paper type
Page 168 · click to enlarge
Page 168

Linking and unlinking trays

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

Using MS812de 168

Page 169 of the Lexmark MS810 user manual — Printing forms
Page 169 · click to enlarge
Page 169

3 Touch Submit.

4 Touch Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Touch Submit.

Printing

Printing a document

Printing forms

Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 146.

1 From the printer home screen, navigate to:

Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings

2 Depending on your printer model, touch

, or Submit.

Using MS812de 169 · ,

Page 170 of the Lexmark MS810 user manual — Adjusting toner darkness
Page 170 · click to enlarge
Page 170

Printing a document

1 From the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the print options pop‑up menus, adjust the settings, if necessary.

Adjusting toner darkness

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch Submit.

Using MS812de 170 · For Windows users · For Macintosh users

Page 171 of the Lexmark MS810 user manual — Supported flash drives and file types
Page 171 · click to enlarge
Page 171

Printing from a flash drive

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Recommended flash drives File type

Documents:

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)
  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Using MS812de 171

Page 172 of the Lexmark MS810 user manual — Printing from a flash drive
Page 172 · click to enlarge
Page 172

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

  • A flash drive icon appears on the printer home screen when a flash drive is inserted.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, touch the document you want to print.

Using MS812de 172

Page 173 of the Lexmark MS810 user manual — Printing confidential and other held jobs
Page 173 · click to enlarge
Page 173

3 Touch the arrows to specify the number of copies for printing, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the printer control panel, navigate to:

> Security > Confidential Print > select the print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

2 Touch Submit.

Printing confidential and other held jobs

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

Using MS812de 173 · Use To · For Windows users

Page 174 of the Lexmark MS810 user manual — Printing a directory list
Page 174 · click to enlarge
Page 174

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

  • 6 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > select the print job > specify the number of copies > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

  • 5 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > select the print job > specify the number of copies > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Using MS812de 174 · For Macintosh users

Page 175 of the Lexmark MS810 user manual — Checking the virtual display
Page 175 · click to enlarge
Page 175

Canceling a print job

Canceling a print job from the printer control panel

1 Touch Cancel Jobs on the printer control panel, or press on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type Run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

Using MS812de 175 · In Windows 8 · a Click

Page 176 of the Lexmark MS810 user manual — Configuring supply notifications from the Embedded Web Server
Page 176 · click to enlarge
Page 176
  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears in the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e-mail when the supply condition is reached. The status of the supply will appear on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Using MS812de 176 · Notification Description

Page 177 of the Lexmark MS810 user manual — Printing a menu settings page
Page 177 · click to enlarge
Page 177

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Configuration > Other Settings tab > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within the specified time, all of the jobs for that user are deleted.

4 Save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Copy Printer Settings.

3 To change the language, select a language from the drop‑down menu, and then click Click here to submit language.

4 Click Printer Settings.

5 Type the IP addresses of the source and target printers.

6 Click Copy Printer Settings.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Using MS812de 177

Page 178 of the Lexmark MS810 user manual — Saving energy
Page 178 · click to enlarge
Page 178

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

  • Each gauge displays the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the home screen, navigate to:

Status/Supplies > View Supplies

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Using MS812de 178

Page 179 of the Lexmark MS810 user manual — Reducing printer noise
Page 179 · click to enlarge
Page 179
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode.

3 Select a setting.

Using MS812de 179 · Use To

Page 180 of the Lexmark MS810 user manual — Adjusting Sleep mode
Page 180 · click to enlarge
Page 180

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer will ignore the Advance Start command.

Off Use factory default settings.

4 Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.

Select from 1 to 120 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode, and then touch Submit.

Using MS812de 180 · Use To

Page 181 of the Lexmark MS810 user manual — Adjusting the brightness of the printer display
Page 181 · click to enlarge
Page 181

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are turned off safely.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings

2 From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Hibernate, and then touch Submit.

Adjusting the brightness of the printer display

To save energy, or if you are have trouble reading from the display, adjust the brightness of the display.

Select from 20 to 100. The factory default setting is 100.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Screen Brightness

2 In the Screen Brightness field, enter the brightness percentage you want for the display, and then touch Submit.

Using MS812de 181

Page 182 of the Lexmark MS810 user manual — Statement of Volatility
Page 182 · click to enlarge
Page 182

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 177.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 183.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now > Submit

Securing the memory before moving the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Using MS812de 182

Page 183 of the Lexmark MS810 user manual — Erasing volatile memory
Page 183 · click to enlarge
Page 183

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display, instead of the standard home screen icons.

Using MS812de 183

Page 184 of the Lexmark MS810 user manual — Configuring printer hard disk encryption
Page 184 · click to enlarge
Page 184

3 Touch Wipe All Settings.

The printer restarts several times during this process.

4 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

Configuring Disk Wiping in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a printer hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar indicates the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer undergoes a power‑on reset, and then returns to normal operating mode.

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Using MS812de 184

Page 185 of the Lexmark MS810 user manual — Finding printer security information
Page 185 · click to enlarge
Page 185
  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed. For more information, visit the Lexmark security Web page and see the Embedded Web Server Administrator’s Guide.

1 Go to http://support.lexmark.com, and then navigate to:

Support & Downloads > Tech Library > Manuals & Guides

2 Type Embedded Web Server in the keyword field, and then click Filter.

Using MS812de 185

Page 186 of the Lexmark MS810 user manual — Finding printer security information
Page 186 · click to enlarge
Page 186

3 Click Embedded Web Server to launch the document.

Using MS812de 186

Page 187 of the Lexmark MS810 user manual — Tips on using envelopes
Page 187 · click to enlarge
Page 187

Paper and specialty media guide 187

Paper and specialty media guide

  • Make sure the paper size, type, and weight are set correctly on the computer or printer control panel.
  • Flex, fan, and straighten specialty media before loading it.
  • The printer may print at a reduced speed to prevent damage to the fuser.
  • For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Using specialty media

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly affect print quality.

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray.
  • Print samples on the card stock being considered for use before buying large quantities.
  • Specify the paper texture and weight from the tray settings to match the paper loaded in the tray.
  • Preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper feed problems.
  • Before loading the card stock on the tray, flex and fan the card stock to loosen them. Straighten the edges on a level surface.

Tips on using envelopes

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the envelopes loaded in the tray.
  • Print samples on the envelopes being considered for use before buying large quantities.
  • Use envelopes designed specifically for laser printers.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb) paper or 25% cotton.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist. – Are stuck together or damaged in any way. – Have windows, holes, perforations, cutouts, or embossing. – Have metal clasps, string ties, or folding bars. – Have an interlocking design. – Have postage stamps attached. – Have any exposed adhesive when the flap is in the sealed or closed position.
Page 188 of the Lexmark MS810 user manual — Paper characteristics
Page 188 · click to enlarge
Page 188

Paper and specialty media guide 188

  • – Have bent corners. – Have rough, cockle, or laid finishes.
  • Adjust the width guides to fit the width of the envelopes.
  • Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

Tips on using labels

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels loaded in the tray.
  • Print samples on labels being considered for use before buying large quantities.
  • For more information on label printing, characteristics, and design, see the Card Stock & Label Guide on the Lexmark Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
  • Use labels designed specifically for laser printers.
  • Do not use labels with slick backing material.
  • Do not use labels with exposed adhesive.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
  • Before loading labels on the tray, flex and fan labels to loosen them. Straighten the edges on a level surface.

Tips on using transparencies

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the transparencies loaded in the tray.
  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Use transparencies designed specifically for laser printers.
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex and fan the sheets to prevent them from sticking together.
  • When printing on large volumes of transparencies, make sure to print by batches of only up to 20 with an interval of at least three minutes between batches, to prevent the transparencies from sticking together in the bin. You can also remove transparencies from the bin by batches of 20.

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these factors before printing on them:

Page 189 of the Lexmark MS810 user manual — Selecting paper
Page 189 · click to enlarge
Page 189

Paper and specialty media guide 189

Weight

The printer trays and multipurpose feeder can automatically feed paper weights between 60–176 g/m2 (16–47‑lb) grain long paper. The 2100‑sheet tray can automatically feed paper weights up to 60–135 g/m2 (16–36‑lb) grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, and may cause jams.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–176 g/m2 (16–47‑lb) paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability, resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
Page 190 of the Lexmark MS810 user manual — Using recycled paper and other office papers
Page 190 · click to enlarge
Page 190

Paper and specialty media guide 190

  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

  • Use grain long for 60–90 ‑ g/m 2 (16–24 ‑ lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid paper with rough or heavily textured surfaces.
  • Use inks that are not affected by the resin in toner. Inks that are oxidation ‑ set or oil ‑ based generally meet these requirements; latex inks might not.
  • Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
  • When in doubt, contact your paper supplier.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help

Page 191 of the Lexmark MS810 user manual — Storing paper
Page 191 · click to enlarge
Page 191

Paper and specialty media guide 191

customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.
Page 192 of the Lexmark MS810 user manual — Paper sizes supported by the printer
Page 192 · click to enlarge
Page 192

Paper and specialty media guide 192

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

Paper types and weights supported by the printer

The printer engine supports 60–176‑g/m2 (16–47‑lb) paper weights.

Lexmark MS810 — Paper types and weights supported by the printer diagram (page 192)
Fig. 172 · Paper types and weights supported by the printer

Paper type 250‑ or 550‑sheet trays

* Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 188.

Paper sizes supported by the printer

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

Optional 2100‑sheet tray Multipurpose feeder

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.8 x 8.3 in.)

A6 105 x 148 mm (4.1 x 5.8 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).

Duplex

Page 193 of the Lexmark MS810 user manual — Supported paper sizes, types, and weights
Page 193 · click to enlarge
Page 193

Paper and specialty media guide 193

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

Optional 2100‑sheet tray Multipurpose feeder

JIS B5 182 x 257 mm (7.2 x 10.1 in.)

Letter 216 x 279 mm (8.5 x 11 in.)

Legal 216 x 356 mm (8.5 x 14 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.)

Oficio 216 x 340 mm (8.5 x 13.4 in.)

Folio 216 x 330 mm (8.5 x 13 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.)

Universal3 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.)

70 x 127 mm to 216 x 356 mm (2.76 x 5 to 8.5 x 14 in.)

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.)

9 Envelope 98 x 225 mm (3.9 x 8.9 in.)

10 Envelope 105 x 241 mm (4.1 x 9.5 in.)

DL Envelope 110 x 220 mm (4.3 x 8.7 in.)

C5 Envelope 162 x 229 mm (6.38 x 9.01 in.)

B5 Envelope 176 x 250 mm (6.93 x 9.84 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).

Duplex

Page 194 of the Lexmark MS810 user manual — Supported paper sizes
Page 194 · click to enlarge
Page 194

Paper and specialty media guide 194

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

Optional 2100‑sheet tray Multipurpose feeder

Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).

Paper sizes, types, and weights supported by the finishers

Supported paper sizes

Lexmark MS810 — Supported paper sizes diagram (page 194)
Fig. 173 · Supported paper sizes

Paper size 4‑bin mailbox Output expander and

1 The finisher stacks the paper but does not staple or punch holes in it.

2 The finisher staples the paper if it is loaded long edge first.

3 The finisher staples the paper if its width is between 8.27 and 8.54 inches but does not punch holes in it.

Duplex

Page 195 of the Lexmark MS810 user manual — Supported paper types and weights
Page 195 · click to enlarge
Page 195

Paper and specialty media guide 195

Supported paper types and weights

Lexmark MS810 — Supported paper types and weights diagram (page 195)
Fig. 174 · Supported paper types and weights

Paper type Paper weight 4‑bin mailbox Output expander and high‑capacity

1 The finisher stacks the paper but does not staple or punch holes in it.

2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 188.

Page 196 of the Lexmark MS810 user manual — Paper sizes, types, and weights supported by the finishers
Page 196 · click to enlarge
Page 196

Paper and specialty media guide 196

Paper type Paper weight 4‑bin mailbox Output expander and high‑capacity

Staple finisher Staple, hole punch

Colored Paper 90–176 g/m2

1 The finisher stacks the paper but does not staple or punch holes in it.

2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 188.

Show 5 more labels / short text on this page
finisher · output expander · (24–47 lb) · 60–90 g/m2 · (16–24 lb)
Page 197 of the Lexmark MS810 user manual — Understanding the printer menus
Page 197 · click to enlarge
Page 197

Understanding the printer menus 197

Understanding the printer menus

Menus list

Paper Menu Reports Network/Ports

Default Source Paper Size/Type

Menu Settings Page Device Statistics

Network Setup Page 1

Parallel [x] Serial [x]

Custom Bin Names 3

Universal Setup Bin Setup

Edit Security Setups 4

Miscellaneous Security Settings 3

Printing Guide Print Defects Guide

Security Audit Log Set Date and Time

1 Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.

2 Depending on the printer setup, this menu item appears as Standard Network or Network [x].

3 This menu appears only in touch‑screen printer models.

4 This menu appears only in select touch‑screen printer models.

Show 26 more labels / short text on this page
Active NIC · Standard Network 2 · Configure MP · Stapler Test · Standard USB · Substitute Size · Paper Texture · Profiles List · Paper Weight · Print Fonts · SMTP Setup · Paper Loading · Print Directory · Custom Types · Asset Report · Custom Names 3 · Security Settings Help · General Settings · Print All Guides · Flash Drive Menu · Print Quality · Confidential Print · Print Settings · Disk Wiping · Information Guide · Supplies Guide
Page 198 of the Lexmark MS810 user manual — Paper Size/Type menu
Page 198 · click to enlarge
Page 198

Understanding the printer menus 198

Paper menu

Default Source menu

Set a default paper source for all print jobs.

Tray [x] MP Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for MP Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. The multipurpose feeder may also be linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and in the multipurpose feeder.
Show 4 more labels / short text on this page
Use To · Default Source · Use To · Tray [x] Size
Page 199 of the Lexmark MS810 user manual — Paper menu
Page 199 · click to enlarge
Page 199

Understanding the printer menus 199

Specify the paper type loaded in each tray.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. Make sure to set the paper size value.

Use To · Tray [x] Type · MP Feeder Size

Page 200 of the Lexmark MS810 user manual — Paper menu
Page 200 · click to enlarge
Page 200

Understanding the printer menus 200

Specify the paper type loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure to “Cassette” for MP Feeder Type to appear as a menu.

Specify the paper size being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.
Show 4 more labels / short text on this page
Use To · MP Feeder Type · Manual Paper Size · Manual Paper Type
Page 201 of the Lexmark MS810 user manual — Substitute Size menu
Page 201 · click to enlarge
Page 201

Understanding the printer menus 201

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.

Substitute Size menu

Substitute a specified paper size if the requested paper size is not available.

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without Change Paper appearing.
Show 8 more labels / short text on this page
Use To · Manual Envelope Size · Manual Envelope Type · Use To · Configure MP · Cassette Manual First · Use To · Substitute Size
Page 202 of the Lexmark MS810 user manual — Paper Texture menu
Page 202 · click to enlarge
Page 202

Understanding the printer menus 202

Paper Texture menu

Specify the relative texture of the plain paper loaded in a specific tray.

Specify the relative texture of the card stock loaded in a specific tray.

  • Normal is the factory default setting.
  • These options appear only if card stock is supported.

Specify the relative texture of the transparencies loaded in a specific tray.

Specify the relative texture of the recycled paper loaded in a specific tray.

Specify the relative texture of the labels loaded in a specific tray.

Specify the relative texture of the vinyl labels loaded in a specific tray.

Specify the relative texture of the bond paper loaded in a specific tray.

Specify the relative texture of the envelopes loaded in a specific tray.

Specify the relative texture of the rough envelopes loaded in a specific tray.

Specify the relative texture of the letterhead loaded in a specific tray.

Show 21 more labels / short text on this page
Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Vinyl Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough
Page 203 of the Lexmark MS810 user manual — Paper Weight menu
Page 203 · click to enlarge
Page 203

Understanding the printer menus 203

Specify the relative texture of the preprinted paper loaded in a specific tray.

Specify the relative texture of the colored paper loaded in a specific tray.

Specify the relative texture of the light paper loaded in a specific tray.

Specify the relative texture of the heavy paper loaded in a specific tray.

Specify the relative texture of the rough or cotton paper loaded in a specific tray.

Specify the relative texture of the custom paper loaded in a specific tray.

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Show 22 more labels / short text on this page
Use To · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough · Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy
Page 204 of the Lexmark MS810 user manual — Paper Weight menu
Page 204 · click to enlarge
Page 204

Understanding the printer menus 204

Specify the relative weight of the labels loaded.

Specify the relative weight of the vinyl labels loaded.

Specify the relative weight of the bond paper loaded.

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Specify the relative weight of the colored paper loaded.

Specify that the weight of the paper loaded is light.

Specify that the weight of the paper loaded is heavy.

Specify the relative weight of the cotton or rough paper loaded.

Show 23 more labels / short text on this page
Use To · Labels Weight · Light Normal Heavy · Vinyl Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Light Normal Heavy
Page 205 of the Lexmark MS810 user manual — Paper Loading menu
Page 205 · click to enlarge
Page 205

Understanding the printer menus 205

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.

Paper Loading menu

Determine and set two-sided printing for all print jobs with Card Stock as the paper type.

Determine and set two-sided printing for all print jobs with Recycled as the paper type.

Determine and set two-sided printing for all print jobs with Labels as the paper type.

Determine and set two-sided printing for all print jobs with Vinyl Labels as the paper type.

Determine and set two-sided printing for all print jobs with Bond as the paper type.

Determine and set two-sided printing for all print jobs with Letterhead as the paper type.

Determine and set two-sided printing for all print jobs with Preprinted as the paper type.

Determine and set two-sided printing for all print jobs with Colored as the paper type.

Determine and set two-sided printing for all print jobs with Light as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.
Show 22 more labels / short text on this page
Use To · Custom [x] Weight · Light Normal Heavy · Use To · Card Stock Loading · Duplex Off · Recycled Loading · Duplex Off · Labels Loading · Duplex Off · Vinyl Labels Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off
Page 206 of the Lexmark MS810 user manual — Custom Names menu
Page 206 · click to enlarge
Page 206

Understanding the printer menus 206

Determine and set two-sided printing for all print jobs with Heavy as the paper type.

Determine and set two-sided printing for all print jobs with Rough or Cotton as the paper type.

Determine and set two-sided printing for all print jobs with Custom [x] as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.

Custom Types menu

Associate a paper or specialty media type with a factory default custom type name or a user‑defined custom name created from the Embedded Web Server or from MarkVisionTM Professional.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Specify a paper type when Recycled is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Custom Names menu

Custom Name [x] Specify a custom name for a paper type. This name replaces the Custom Type [x] name in the printer menus.

Show 11 more labels / short text on this page
Use To · Heavy Loading · Duplex Off · Rough/Cotton Loading · Duplex Off · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled · Use To
Page 207 of the Lexmark MS810 user manual — Universal Setup menu
Page 207 · click to enlarge
Page 207

Understanding the printer menus 207

Custom Bin Names menu

Standard Bin Specify a custom name for the standard bin.

Bin [x] Specify a custom name for Bin [x].

Universal Setup menu

Identify the units of measure.

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Set the portrait width.

3–8.5 inches 76–216 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. You can increase the width in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. You can increase the width in 1 ‑ mm increments.

Set the portrait height.

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. You can increase the height in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. You can increase the height in 1 ‑ mm increments.

Specify the feed direction if the paper can be loaded in either direction.

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.
Show 7 more labels / short text on this page
Use To · Use To · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction
Page 208 of the Lexmark MS810 user manual — Bin Setup menu
Page 208 · click to enlarge
Page 208

Understanding the printer menus 208

Bin Setup menu

Specify the default bin.

Standard Bin Bin [x]

  • If multiple bins are assigned the same name, then the name appears only once in the menu.
  • Standard Bin is the factory default setting.

Specify configuration options for bins.

Mailbox Link Mail Overflow Link Optional Type Assignment

  • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox.
  • Link configures all available bins as one large bin.
  • Mail Overflow configures each bin as a separate mailbox.
  • Link Optional links all available bins except the standard bin and only appears when at least two optional bins are installed.
  • Type Assignment assigns each paper type to a bin or linked bin set.
  • Bins assigned the same name are automatically linked unless Link Optional is selected.

Specify an alternative bin when a designated bin is full.

Standard Bin Bin [x]

  • Standard Bin is the factory default setting.
  • If multiple bins are assigned the same name, then the name only appears once in the bin list.
  • [x] can be any number between 1 and 12 if the appropriate optional bins are installed.
Show 4 more labels / short text on this page
Use To · Output Bin · Configure Bins · Overflow Bin
Page 209 of the Lexmark MS810 user manual — Reports menu
Page 209 · click to enlarge
Page 209

Understanding the printer menus 209

Select a bin for each supported paper type.

Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Labels Bin Vinyl Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Paper Bin Heavy Paper Bin Rough/Cotton Bin Custom [x] Bin

For each type, select the following options:

Disabled Standard Bin Bin [x]

  • Disabled is the factory default setting.
  • [x] can be any number between 1 and 12 if the appropriate optional bins are installed.
  • If multiple bins are assigned the same name, then the name only appears once in the bin list.

Reports menu

Reports menu

Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.

Device Statistics Print a report containing printer statistics such as supply information and details about printed pages.

Stapler Test Print a report that confirms that the staple finisher is functioning properly.

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

Network [x] Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

  • This menu item is available only when more than one network option is installed.
  • This menu item appears only in network printers or in printers connected to print servers.

Use To · Assign Type/Bin · Use To

Page 210 of the Lexmark MS810 user manual — Standard Network or Network [x] menu
Page 210 · click to enlarge
Page 210

Understanding the printer menus 210

Profiles List Print a list of profiles stored in the printer.

Print a report of all the fonts available for the printer language currently set in the printer.

PCL Fonts PostScript Fonts

Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk.

  • Job Buffer Size must be set to 100%.
  • Make sure the optional flash memory or printer hard disk is installed correctly and working properly.
  • This menu item appears only when an optional flash drive or printer hard disk is installed.

Asset Report Print a report containing printer asset information, such as serial number and model name.

Network/Ports menu

Active NIC menu

Allow the printer to connect to a network.

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only if an optional network adapter is installed.

Standard Network or Network [x] menu

Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
Show 7 more labels / short text on this page
Use To · Print Fonts · Use To · Active NIC · Use To · PCL SmartSwitch · On Off
Page 211 of the Lexmark MS810 user manual — Network/Ports menu
Page 211 · click to enlarge
Page 211

Understanding the printer menus 211

Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel, and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the network input buffer.

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing. This menu only appears when a formatted disk is installed.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only when the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel, and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.
Show 10 more labels / short text on this page
Use To · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto
Page 212 of the Lexmark MS810 user manual — UAA LAA
Page 212 · click to enlarge
Page 212

Understanding the printer menus 212

Standard Network Setup OR Network [x] Setup

Show and set the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Reports
  • Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Network Card
  • Network/Ports > Network [x] > Network [x] Setup > Network Card

View the connection status of the wireless network adapter.

View Card Speed View the speed of an active wireless network adapter.

View the network addresses.

UAA LAA

Job Timeout 0, 10–225 seconds Set the amount of time it takes for a network print job to be canceled.

  • “90 seconds” is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved.

Allow the printer to print a banner page.

Show 8 more labels / short text on this page
Use To · Use To · Use To · View Card Status · Connected Disconnected · Network Address · Banner Page · Off On
Page 213 of the Lexmark MS810 user manual — TCP/IP menu
Page 213 · click to enlarge
Page 213

Understanding the printer menus 213

TCP/IP menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Set Hostname Set the current TCP/IP host name.

IP Address View or change the current TCP/IP address.

Netmask View or change the current TCP/IP netmask.

Gateway View or change the current TCP/IP gateway.

Specify the DHCP address and parameter assignment.

Specify the RARP address assignment setting.

Specify the BOOTP address assignment setting.

Specify the Zero Configuration Networking setting.

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address View or change the current WINS server address.

View or change the current DDNS setting.

View or change the current mDNS setting.

DNS Server Address View or change the current DNS server address.

Show 17 more labels / short text on this page
Use To · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No
Page 214 of the Lexmark MS810 user manual — Wireless menu
Page 214 · click to enlarge
Page 214

Understanding the printer menus 214

Backup DNS Server Address View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

View or change the current HTTPS setting.

IPv6 menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > IPv6
  • Network/Ports > Network [x] > Network [x] Setup > IPv6

Enable IPv6 in the printer.

Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router.

View Hostname Set the host name.

Enable DHCPv6 in the printer.

Wireless menu

To access the menu, navigate to:

Network/Ports > Network [x] > Network [x] Setup > Wireless

Show 11 more labels / short text on this page
Use To · Enable HTTPS · Yes No · Use To · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off
Page 215 of the Lexmark MS810 user manual — AppleTalk menu
Page 215 · click to enlarge
Page 215

Understanding the printer menus 215

Wi‑Fi Protected Setup

Establish a wireless network and enable network security.

Start Push Button Method Start PIN Method

  • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time.
  • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.

Enable/Disable WPS Auto‑detection

Automatically detect the connection method that an access point with WPS uses—Start Push Button Method or Start PIN Method.

Specify the network mode.

  • Infrastructure is the factory default setting. This lets the printer access a network using an access point.
  • Ad hoc configures wireless connection directly between the printer and a computer.

Specify the wireless standard for the wireless network.

802.11b/g 802.11b/g/n

Choose Network Select an available network for the printer to use.

View Signal Quality View the quality of the wireless connection.

View Security Mode View the encryption method for the wireless network.

AppleTalk menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network [x] > Network [x] Setup > AppleTalk

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

Show 9 more labels / short text on this page
Use To · Enable Disable · Network Mode · BSS Type · Infrastructure Ad hoc · Compatibility · Use To · Activate · Yes No
Page 216 of the Lexmark MS810 user manual — Standard USB menu
Page 216 · click to enlarge
Page 216

Understanding the printer menus 216

View Address Show the assigned AppleTalk address.

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Show 9 more labels / short text on this page
Use To · Set Zone · Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto
Page 217 of the Lexmark MS810 user manual — Parallel [x] menu
Page 217 · click to enlarge
Page 217

Understanding the printer menus 217

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Parallel [x] menu

Show 9 more labels / short text on this page
Use To · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway
Page 218 of the Lexmark MS810 user manual — Parallel [x] menu
Page 218 · click to enlarge
Page 218

Understanding the printer menus 218

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the parallel input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The parallel buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 10 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Parallel Buffer · Job Buffering · Off On Auto
Page 219 of the Lexmark MS810 user manual — Serial [x] menu
Page 219 · click to enlarge
Page 219

Understanding the printer menus 219

Enable bidirectional communication through the parallel port.

  • On is the factory default setting.
  • Off disables parallel port negotiation.

Specify the parallel port protocol.

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • Standard tries to resolve parallel port communication problems.

Determine if the printer honors printer hardware initialization requests from the computer.

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determine if the parallel port data is sampled on the leading or trailing edge of a strobe.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Serial [x] menu

Show 14 more labels / short text on this page
Use To · Advanced Status · On Off · Protocol · Standard Fastbytes · Honor Init · On Off · Parallel Mode 2 · On Off · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway
Page 220 of the Lexmark MS810 user manual — Serial [x] menu
Page 220 · click to enlarge
Page 220

Understanding the printer menus 220

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
  • When set to On, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When set to Off, the printer does not perform NPA processing.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the serial input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 8 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Serial Buffer
Page 221 of the Lexmark MS810 user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 221 · click to enlarge
Page 221

Understanding the printer menus 221

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Select the hardware and software handshaking settings for the serial port.

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.

Determine whether the printer communicates availability to the computer.

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.

Specify the rate at which data can be received through the serial port.

1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specify the number of data bits sent in each transmission frame.

Show 8 more labels / short text on this page
Use To · Job Buffering · Off On Auto · Protocol · Robust XON · On Off · Baud · Data Bits
Page 222 of the Lexmark MS810 user manual — SMTP Setup menu
Page 222 · click to enlarge
Page 222

Understanding the printer menus 222

Set the parity for serial input and output data frames.

Even Odd None Ignore

Determine whether the printer uses the DSR Signal.

  • Off is the factory default setting.
  • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Primary SMTP Gateway Specify SMTP server gateway and port information.

Secondary SMTP Gateway Port

5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.

Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.

Set the printer to use SSL for increased security when connecting to the SMTP server.

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specify the type of user authentication required for printing privileges.

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Show 10 more labels / short text on this page
Use To · Parity · Honor DSR · On Off · Use To · Secondary SMTP Gateway · SMTP Timeout · Use SSL · Disabled Negotiate Required · SMTP Server Authentication
Page 223 of the Lexmark MS810 user manual — Edit Security Setups menu
Page 223 · click to enlarge
Page 223

Understanding the printer menus 223

Device‑Initiated E‑mail

Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.

None Use Device SMTP Credentials

User‑Initiated E‑mail

  • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.
  • User ‑ Initiated E ‑ mail, Kerberos 5 Realm, and NTLM Domain appear only in touch ‑ screen printer models.

None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User

Security menu

Edit Security Setups menu

Create a backup password.

  • Off
  • On Password
  • Off is the factory default setting for “Use Backup Password.”
  • This menu appears only if a backup password exists.

Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup, Active Directory, LDAP, Password, and PIN.

Internal Accounts NTLM Simple Kerberos Setup Kerberos Setup Active Directory LDAP LDAP+GSSAPI Password PIN

Add or edit a security template.

[list of available templates]

Show 10 more labels / short text on this page
Use To · Device Userid · Device Password · Kerberos 5 Realm · NTLM Domain · Use To · Edit Backup Password · Use Backup Password · Edit Building Blocks · Edit Security Templates
Page 224 of the Lexmark MS810 user manual — Confidential Print menu
Page 224 · click to enlarge
Page 224

Understanding the printer menus 224

Control access to printer menus, firmware updates, held jobs, and other access points.

Administrative Menus Function Access Management Solutions Cancel jobs at the Device

Miscellaneous Security Settings menu

Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.

Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1 to 10. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting.
  • Panel Login Timeout specifies how long the printer remains idle on the printer control panel before automatically logging the user off. Settings range from 1 to 900 seconds. 30 seconds is the factory default setting.
  • Remote Login Timeout specifies how long a remote interface remains idle before automatically logging the user off. Settings range from 1 to 120 seconds. 10 minutes is the factory default setting.

1–16 Limit the digit length of the PIN.

Confidential Print menu

Limit the number of times an invalid PIN can be entered.

  • This menu appears only when a formatted, non-defective printer hard disk is installed.
  • Once the limit is reached, the print jobs for that user name and PIN are deleted.
Show 8 more labels / short text on this page
Use To · Edit Access Controls · Use To · Login Restrictions · Minimum PIN Length · Use To · Max Invalid PIN · Off 2–10
Page 225 of the Lexmark MS810 user manual — Disk Wiping menu
Page 225 · click to enlarge
Page 225

Understanding the printer menus 225

Limit the amount of time a confidential print job stays in the printer before it is deleted.

Off 1 hour 4 hours 24 hours 1 week

  • If the “Confidential Job Expiration” setting is changed while confidential print jobs reside in the printer RAM or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in the printer RAM are deleted.

Set a time limit on how long the printer stores print jobs.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs needing verification.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs for printing at a later time.

Off 1 hour 4 hours 24 hours 1 week

Disk Wiping menu

Disk Wiping erases only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Specify the mode for disk wiping.

Show 8 more labels / short text on this page
Use To · Confidential Job Expiration · Repeat Job Expiration · Verify Job Expiration · Reserve Job Expiration · Use To · Wiping Mode · Auto
Page 226 of the Lexmark MS810 user manual — Set Date and Time menu
Page 226 · click to enlarge
Page 226

Understanding the printer menus 226

Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Only automatic wiping enables users to activate disk wiping without having to turn the printer off for an extended amount of time.
  • Highly confidential information should be wiped using only the Multiple pass method.

Security Audit Log menu

Export Log Let an authorized user export the audit log.

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • The audit log can be downloaded from the Embedded Web Server and saved on a computer.

Specify whether or not audit logs are deleted.

Specify how and whether or not audit logs are created.

Yes No Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time Show the current date and time settings for the printer.

Show 8 more labels / short text on this page
Use To · Automatic Method · Use To · Delete Log · Yes No · Configure Log · Enable Audit · Use To
Page 227 of the Lexmark MS810 user manual — Security Audit Log menu
Page 227 · click to enlarge
Page 227

Understanding the printer menus 227

Manually Set Date and Time

Enter the date and time.

  • For touch ‑ screen printer models, date and time are set in YYYY-MM-DD HH:MM format.
  • Manually setting the date and time sets Enable NTP to No.
  • For non ‑ touch ‑ screen printer models, the wizard lets you set the date and time in YYYY ‑ MM ‑ DD ‑ HH:MM format.

Select the time zone.

[list of time zones]

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

  • On is the factory default setting.
  • The setting is turned off if you manually set the date and time.
Show 7 more labels / short text on this page
Use To · [input date/time] · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off
Page 228 of the Lexmark MS810 user manual — General Settings menu
Page 228 · click to enlarge
Page 228

Understanding the printer menus 228

Settings menu

General Settings

General Settings menu

Set the language of the text that appears on the printer display.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Get an estimate on the status of supplies.

Show estimates Do not show estimates

  • “Show estimates” displays the estimated supply status in pages on the printer control panel, printer Web page, and on the Menu Settings and the Device Statistics reports.
  • “Do not show estimates” hides the estimated supply status in any location.

Use To · Display Language · Show Supply Estimates

Page 229 of the Lexmark MS810 user manual — Settings menu
Page 229 · click to enlarge
Page 229

Understanding the printer menus 229

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • For touch ‑ screen printer models, touch Eco ‑ Mode , and then select from the options.
  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.

Reduce the amount of noise produced by the printer.

  • For touch ‑ screen printer models, touch Quiet Mode , and then select from the options.
  • Off is the factory default setting. This setting supports the performance specifications for your printer.
  • On configures the printer to produce as little noise as possible. This setting is best suited for printing text and line art.
  • Selecting Photo from the printer driver may disable Quiet mode and provide better print quality and full ‑ speed printing.

Instruct the printer to run the setup wizard.

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the Country select screen, the default becomes No.
Show 6 more labels / short text on this page
Use To · Eco-Mode · Quiet Mode · Off On · Run Initial setup · Yes No
Page 230 of the Lexmark MS810 user manual — Settings menu
Page 230 · click to enlarge
Page 230

Understanding the printer menus 230

Specify a language and custom key information for the printer control panel keyboard. The additional tabs enable access to accent marks and symbols from the keypad on the printer control panel.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkish Czech Simplified Chinese Traditional Chinese Japanese Custom Key 1 Custom Key 2

  • This menu appears only in touch ‑ screen printer models.
  • Custom Key 2 appears only in select touch ‑ screen printer models.

Specify the unit of measurement for paper sizes.

  • US is the factory default setting.
  • The initial setting is determined by your country or region selection in the initial setup wizard.
Show 5 more labels / short text on this page
Use To · Keyboard · Keyboard Type · Paper Sizes · US Metric
Page 231 of the Lexmark MS810 user manual — Settings menu
Page 231 · click to enlarge
Page 231

Understanding the printer menus 231

Specify what is displayed on the upper left and right corners of the printer control panel.

Left side Right side

For the “Left side” and “Right side” options, select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

  • This menu appears only in touch ‑ screen printer models.
  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.

Customize displayed information that will appear on the upper left and right corners of the printer control panel.

Customize the displayed information for Black Toner.

Select from the following options:

Do not display Display Message to Display

  • This menu appears only in touch ‑ screen printer models.
  • “Do not display” is the factory default setting for “When to display.”
  • Default is the factory default setting for “Message to Display.”
Show 10 more labels / short text on this page
Use To · Displayed Information · Displayed Information (continued) · Custom Text [x] · Displayed Information (continued) · Black Toner · When to display · Default Alternate Default · [text entry] Alternate · [text entry]
Page 232 of the Lexmark MS810 user manual — Settings menu
Page 232 · click to enlarge
Page 232

Understanding the printer menus 232

Customize the displayed information for Paper Jam, Load Paper, and Service Errors.

Paper Jam Load Paper Service Errors

Select from the following options:

Yes No Message to Display

  • This menu appears only in touch ‑ screen printer models.
  • No is the factory default setting for “Display.”
  • Default is the factory default setting for “Message to Display.”

Change the icons and buttons that appear on the printer control panel.

Change Language Search Held Jobs Held Jobs USB Drive Profiles and Solutions Bookmarks Jobs by user

For each icon or button, select from the following options:

Display Do not display

  • “Profiles and Solutions” appears only in touch ‑ screen printer models.
  • Display is the factory default setting for Search Held Jobs, Held jobs, and USB Drive.
  • “Do not display” is the factory default setting for “Change Language,” “Profiles and Solutions,” “Bookmarks,” and “Jobs by user.”

Change the icons and buttons that appear on the printer control panel.

Forms and Favorites Background and Idle Screen Eco-Settings

For each icon or button, select from the following options:

Display Do not display

  • “Forms and Favorites,” “Background and Idle Screen,” and “Eco ‑ Settings” appear only in touch ‑ screen printer models.
  • Display is the factory default setting.
Show 8 more labels / short text on this page
Use To · Displayed Information (continued) · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization · Home screen customization
Page 233 of the Lexmark MS810 user manual — Settings menu
Page 233 · click to enlarge
Page 233

Understanding the printer menus 233

Format the printer date.

MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD

  • This menu appears only in touch ‑ screen printer models.
  • MM-DD-YYYY is the US factory default setting.

Format the printer time.

12 hour A.M./P.M. 24 hour clock

20–100 Specify the brightness of the display.

  • This menu appears only in touch ‑ screen printer models.
  • 100 is the factory default setting.

Set the amount of light from the bin.

  • If Eco-Mode is set to Energy or Energy/Paper, then the factory default setting is Dim.
  • If Eco-Mode is set to Off or set to Paper, then the factory default setting is Bright.
  • This menu appears only when an indicator light is installed on the bin or when an optional bin with an indicator light is added.

Specify whether icons and buttons have audio feedback.

  • This menu appears only in touch ‑ screen printer models.
  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Specify whether bookmarks are displayed from the Held Jobs area.

  • This menu appears only in touch ‑ screen printer models.
  • Yes is the factory default setting. When Yes is selected, bookmarks appear in the Held Jobs area.

Web Page Refresh Rate

30–300 Specify the number of seconds between Embedded Web Server refreshes.

  • This menu appears only in touch ‑ screen printer models.
  • 120 is the factory default setting.
Show 12 more labels / short text on this page
Use To · Date Format · Time Format · Screen Brightness · Output Lighting · Normal/Standby Mode · Off Dim Bright · Audio Feedback · Button Feedback · On Off Volume · Show Bookmarks · Yes No
Page 234 of the Lexmark MS810 user manual — Settings menu
Page 234 · click to enlarge
Page 234

Understanding the printer menus 234

Contact Name Specify a contact name for the printer.

  • This menu appears only in touch ‑ screen printer models.
  • The contact name will be stored on the Embedded Web Server.

Location Specify the location of the printer.

  • This menu appears only in touch ‑ screen printer models.
  • The location will be stored on the Embedded Web Server.

Set an alarm to sound when the printer requires user intervention.

Alarm Control Cartridge Alarm Staple Alarm Hole Punch Alarm

For each alarm type, select from the following options:

  • Single is the factory default setting for Alarm Control. Single sounds three quick beeps.
  • Off is the factory default setting for Cartridge Alarm, Staple Alarm, and Hole Punch Alarm. Off means no alarm will sound.
  • Continuous repeats three beeps every 10 seconds.

Specify the number of minutes of inactivity before the printer enters a lower power state.

  • Standby Mode appears only in touch ‑ screen printer models.
  • 15 is the factory default setting.

Set the amount of time the printer waits after a job is printed before it goes into a reduced power state.

  • 30 is the factory default setting.
  • Disabled appears only when Energy Conserve is set to Off.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.
Show 9 more labels / short text on this page
Use To · Alarms · Off Single Continuous · Timeouts · Standby Mode · Disabled 1–240 · Timeouts · Sleep Mode · Disabled 1–120
Page 235 of the Lexmark MS810 user manual — Settings menu
Page 235 · click to enlarge
Page 235

Understanding the printer menus 235

Set the printer to operate at a low power state.

Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month

  • When the Hibernate Timeout timer expires, the printer uses Ethernet connection to check the value of “Hibernate Timeout on Connection.”
  • If “Hibernate Timeout on Connection” is set to “Do Not Hibernate,” then the printer never automatically hibernates.
  • If “Hibernate Timeout on Connection” is set to “Hibernate,” then the printer follows the Hibernate Timeout value, except when it is set to Disabled.
  • Disabled is the factory default setting except for European Union countries, Canada, and Switzerland.
  • “3 days” is the factory default setting for European Union countries, Canada, and Switzerland.

Set the amount of time in seconds the printer waits before returning the display to a ready state.

Set the printer to continue the specified job without returning to the home screen when the Screen Timeout timer expires.

  • Prolong Screen Timeout appears only in touch ‑ screen printer models.
  • On allows the user to reset the Screen Timeout timer instead of returning to ready state.
  • Off follows the normal Screen Timeout value.
  • Off is the factory default setting.

Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.

  • “90 sec” is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs.

Set the amount of time in seconds the printer waits for additional data before canceling a print job.

  • “40 sec” is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.
Show 15 more labels / short text on this page
Use To · Timeouts · Hibernate Timeout · Timeouts · Screen Timeout · 15–300 sec · Timeouts · Prolong Screen Timeout · Off On · Timeouts · Print Timeout · Disabled 1–255 sec · Timeouts · Wait Timeout · Disabled 15–65535 sec
Page 236 of the Lexmark MS810 user manual — Settings menu
Page 236 · click to enlarge
Page 236

Understanding the printer menus 236

Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue.

  • “30 sec” is the factory default setting.
  • This menu appears only when a printer hard disk is installed.

Set the printer to restart when an error is encountered.

Reboot when idle Reboot always Reboot never Max Auto Reboots

  • “Reboot always” is the factory default setting for Auto Reboot.
  • 5 is the factory default setting for Max Auto Reboots.
  • If the printer performs the same number of automatic reboots that is set in the printer within a certain amount of time, then the printer shows the applicable error instead of rebooting.

Set the number of automatic reboots that the printer can perform.

  • 5 is the factory default setting.
  • If the printer performs a number of automatic reboots that is the same as the menu setting within a certain amount of time, then the printer displays the applicable error instead of rebooting.

Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Set the printer to check for jammed paper automatically.

Show 17 more labels / short text on this page
Use To · Timeouts · Job Hold Timeout · 5–255 sec · Error Recovery · Auto Reboot · Error Recovery · Max Auto Reboots · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Jam Assist · On Off
Page 237 of the Lexmark MS810 user manual — Settings menu
Page 237 · click to enlarge
Page 237

Understanding the printer menus 237

Let the printer successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Hibernate Timeout on Connection

To set the printer to follow the setting of “Hibernate Timeout” even when an active Ethernet connection exists.

Do Not Hibernate Hibernate

  • If “Hibernate Timeout on Connection” is set to “Do Not Hibernate,” then the printer never automatically hibernates.
  • If “Hibernate Timeout on Connection” is set to “Hibernate,” then the printer follows the value of the “Hibernate Timeout” setting, except when it is set to Disabled.
  • “Do Not Hibernate” is the factory default setting.

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do nothing Sleep Hibernate

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts when you press and hold the Sleep button.

Do nothing Sleep Hibernate

Restore the printer settings to the factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user ‑ defined settings.
  • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in the printer hard disk are not affected.

Select Custom Home Messages on the printer display.

Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1

Show 7 more labels / short text on this page
Use To · Print Recovery · Page Protect · Off On · Press Sleep Button · Factory Defaults · Custom Home Message
Page 238 of the Lexmark MS810 user manual — Print Settings menu
Page 238 · click to enlarge
Page 238

Understanding the printer menus 238

Export the printer configuration package to a flash drive.

Flash Drive Menu

Print Settings menu

1–999 Specify a default number of copies for each print job.

Set a default paper source for all print jobs.

Tray [x] MP Feeder Manual Paper Manual Envelope

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether prints are on one side or on both sides of the page.

1 sided 2 sided

Specify whether prints are stapled.

  • Off is the factory default setting.
  • On allows the printer to staple print jobs.
  • This menu appears only when a supported staple finisher is installed.

Specify whether prints have holes for binding.

  • Off is the factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

Specify the number of holes to be made on the prints.

2 holes 3 holes 4 holes

  • “3 holes” is the factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.
Show 13 more labels / short text on this page
Use To · Export Configuration Package · Export · Use To · Copies · Paper Source · Collate · Sides (Duplex) · Staple · Off On · Hole Punch · Off On · Hole Punch Mode
Page 239 of the Lexmark MS810 user manual — Flash Drive Menu
Page 239 · click to enlarge
Page 239

Understanding the printer menus 239

Define the way duplexed pages are bound and printed.

Long Edge Short Edge

  • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). This is the factory default setting.
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify the orientation of a multiple‑page document.

  • Auto is the factory default setting.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.

Specify that multiple‑page images be printed on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Print a border on each page image when using N‑Up (pages per side).

  • None is the factory default setting.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.

Specify the positioning of multiple‑page images when using N‑Up (pages per side).

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.
Show 8 more labels / short text on this page
Use To · Duplex Binding · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver · Paper Saver Border · None Solid · Paper Saver Ordering
Page 240 of the Lexmark MS810 user manual — Setup menu
Page 240 · click to enlarge
Page 240

Understanding the printer menus 240

Specify if blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing on transparencies or when inserting blank pages in a document for notes.

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

Specify if blank pages are inserted in a print job.

Do Not Print Print

Print Settings

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PCL Emulation is the factory default setting.
  • PostScript emulation uses a PostScript interpreter for processing print jobs.
  • PCL Emulation uses a PCL interpreter for processing print jobs.
  • Setting a printer language default does not prevent a software program from sending print jobs that use another printer language.

Determine if print jobs are removed from the print queue when they require unavailable printer options or custom settings. These print jobs are stored in a separate print queue, so other jobs print normally. When the missing information or options, or both are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu appears only if a non-read ‑ only printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.
Show 8 more labels / short text on this page
Use To · Separator Sheets · Separator Sheet Source · Blank Pages · Use To · Printer Language · Job Waiting · On Off
Page 241 of the Lexmark MS810 user manual — Print Settings
Page 241 · click to enlarge
Page 241

Understanding the printer menus 241

Set the logical and physical printable area.

Normal Fit to Page Whole Page

  • Normal is the factory default setting. When attempting to print data in the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Fit to Page fits the page content into the selected paper size.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting, but the printer clips the image at the Normal setting boundary. This setting affects only pages printed using a PCL 5e interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

  • RAM is the factory default setting. Storing downloads in the RAM is temporary.
  • Storing downloads in a flash memory or in a printer hard disk places them in permanent storage. Downloads remain in the flash memory or printer hard disk even when the printer is turned off.
  • This menu item appears only if an optional flash memory or printer hard disk is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

  • Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All is selected.

Alphabetical Oldest First Newest First

  • This menu appears only in touch ‑ screen printer models.
  • Alphabetical is the factory default setting.
Show 7 more labels / short text on this page
Use To · Print Area · Download Target · RAM Flash Disk · Resource Save · On Off · Print All Order
Page 242 of the Lexmark MS810 user manual — Finishing menu
Page 242 · click to enlarge
Page 242

Understanding the printer menus 242

Finishing menu

Specify whether two‑sided (duplex) printing is set as the default for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the printer software. For Windows users:

Click File > Print, and then click Properties, Preferences, Options, or Setup. For Macintosh users: Choose File > Print, and then adjust the settings from the Print dialog and pop‑up menus.

Define the way duplexed pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting. Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

Specify whether blank pages are inserted in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

  • “(1,1,1) (2,2,2)” is the factory default setting.
  • On stacks the print job in sequence.

Specify whether blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.
Show 7 more labels / short text on this page
Use To · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets
Page 243 of the Lexmark MS810 user manual — Finishing menu
Page 243 · click to enlarge
Page 243

Understanding the printer menus 243

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to appear as a menu setting.

Print multiple‑page images on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specify the positioning of multiple‑page images when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

Specify the orientation of a multiple‑page document.

Print a border when using Paper Saver.

Specify whether printed output is stapled.

  • Off is the factory default setting.
  • This menu appears only when a supported staple finisher is installed.

Run Stapler Test Print a report that confirms that the staple finisher is functioning properly.

Specify whether holes will be created on printed outputs for the purpose of collecting the sheets in a binder or folder.

  • Off is the factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.
Show 12 more labels / short text on this page
Use To · Separator Source · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Staple Job · Off On · Hole Punch · On Off
Page 244 of the Lexmark MS810 user manual — Quality menu
Page 244 · click to enlarge
Page 244

Understanding the printer menus 244

Specify the number of holes to be created on printed outputs for the purpose of collecting the sheets in a binder or folder.

2 holes 3 holes 4 holes

  • “3 holes” is the US factory default setting. “4 holes” is the international factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

Offset pages at certain instances.

None Between Copies Between Jobs

  • None is the factory default setting.
  • Between Copies offsets each copy of a print job if Collate is set to On. If Collate is set to Off, then each set of printed pages are offset, such as all page 1's and all page 2's.
  • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed.
  • This menu appears only when a supported staple finisher is installed.

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions Isolated

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
Show 7 more labels / short text on this page
Use To · Hole Punch Mode · Offset Pages · Use To · Print Resolution · Pixel Boost · Toner Darkness
Page 245 of the Lexmark MS810 user manual — Job Accounting menu
Page 245 · click to enlarge
Page 245

Understanding the printer menus 245

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • You can set this option from the printer software. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

Job Accounting menu

Determine and set if the printer creates a log of the print jobs it receives.

Job Accounting Utilities Print and delete log files or export them to a flash drive.

Determine and set how often a log file is created.

Log Action at End of Frequency

Determine and set how the printer responds when the frequency threshold expires.

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Disk Near Full Level

Specify the maximum size of the log file before the printer executes Disk Near Full Action.

Show 13 more labels / short text on this page
Use To · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Job Accounting Log · Off On · Accounting Log Frequency · Weekly Monthly · Off 1–99
Page 246 of the Lexmark MS810 user manual — Utilities menu
Page 246 · click to enlarge
Page 246

Understanding the printer menus 246

Disk Near Full Action

Determine and set how the printer responds when the printer hard disk is nearly full.

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Disk Near Full Level determines when this action is triggered.

Determine and set how the printer responds when disk usage reaches the maximum limit (100MB).

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Determine and set where the printer posts job accounting logs.

E-mail to Send Logs Specify the e‑mail address to which the printer sends job accounting logs.

Log File Prefix Specify the prefix you want for the log file name.

Utilities menu

Delete confidential and held jobs from the printer hard disk.

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
  • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory.
Show 4 more labels / short text on this page
Use To · Disk Full Action · Use To · Remove Held Jobs
Page 247 of the Lexmark MS810 user manual — PDF menu
Page 247 · click to enlarge
Page 247

Understanding the printer menus 247

Format the flash memory.

  • Yes deletes all data stored in flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a non ‑ defective flash memory card is installed.

Delete Downloads on Disk

Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs.

Delete Now Do Not Delete

  • Delete Now sets the printer to delete the downloads and allows the display to return to the originating screen after the deletion.
  • Do Not Delete sets the printer display to return to the main Utilities menu for touch ‑ screen printer models. When selected in non ‑ touch ‑ screen printer models, Do Not Delete sets the printer to return to the originating screen after the deletion.

Activate Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off or reset the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

XPS menu

Print a page containing information on errors, including XML markup errors.

PDF menu

Scale page content to fit the selected paper size.

Show 11 more labels / short text on this page
Use To · Format Flash · Yes No · Coverage Estimator · Off On · Use To · Print Error Pages · Off On · Use To · Scale to Fit · Yes No
Page 248 of the Lexmark MS810 user manual — PCL Emul menu
Page 248 · click to enlarge
Page 248

Understanding the printer menus 248

Print annotations in a PDF.

Do Not Print Print

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Disable the SysStart file.

Establish the font search order.

  • Resident is the factory default setting.
  • This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.
  • Make sure the flash memory option or printer hard disk is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.

PCL Emul menu

Specify the set of fonts used by the Font Name menu.

Resident Disk Download Flash All

  • “Resident” is the factory default setting. Resident shows the factory default set of fonts downloaded in the RAM.
  • “Flash” and “Disk” settings show all fonts resident in that option.
  • The flash option must be properly formatted and cannot be read/write ‑ , write ‑ , or password ‑ protected.
  • “Download” shows all the fonts downloaded in the RAM.
  • “All” shows all fonts available to any option.

Identify a specific font and the option where it is stored.

Show 12 more labels / short text on this page
Use To · Annotations · Use To · Print PS Error · On Off · On Off · Font Priority · Resident Flash/Disk · Use To · Font Source · Font Name · Courier 10
Page 249 of the Lexmark MS810 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 249 · click to enlarge
Page 249

Understanding the printer menus 249

Specify the symbol set for each font name.

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Change the point size for scalable typographic fonts.

1.00–1008.00

  • 12 is the factory default setting.
  • Point size refers to the height of the characters in the font. One point equals approximately 0.014 inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specify the font pitch for scalable monospaced fonts.

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but it cannot be changed.

Specify the orientation of text and graphics on the page.

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • “198 mm” is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow printing of eighty 10 ‑ pitch characters.
Show 13 more labels / short text on this page
Use To · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width
Page 250 of the Lexmark MS810 user manual — PostScript menu
Page 250 · click to enlarge
Page 250

Understanding the printer menus 250

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • “Off” is the factory default setting.
  • “None” ignores the Select Paper Feed command. This option appears only when it is selected by the PCL 5 interpreter.
  • “0–199” allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Display the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Restore all tray and feeder assignments to the factory default settings.

Show 13 more labels / short text on this page
Use To · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults · Tray Renumber · Restore Defaults · Yes No
Page 251 of the Lexmark MS810 user manual — HTML menu
Page 251 · click to enlarge
Page 251

Understanding the printer menus 251

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTJA NewSansMTCS NewSansMTCT NewSansMTKO

Set the default font for HTML documents.

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

1–255 pt Set the default font size for HTML documents.

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.

1–400% Scale the default font for HTML documents.

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Set the page orientation for HTML documents.

Show 7 more labels / short text on this page
Use To · Font Name · Use To · Font Size · Scale · Orientation · Portrait Landscape
Page 252 of the Lexmark MS810 user manual — Help menu
Page 252 · click to enlarge
Page 252

Understanding the printer menus 252

8–255 mm Set the page margin for HTML documents.

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.

Specify whether to print backgrounds on HTML documents.

Do Not Print Print

Image menu

Select the optimal paper size, scaling, and orientation.

Invert bitonal monochrome images.

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scale the image to fit the selected paper size.

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Set the image orientation.

Portrait Landscape Reverse Portrait Reverse Landscape

Help menu

The Help menu consists of a series of Help pages that are stored in the printer as PDFs. They contain information about using the printer and performing printing tasks.

English, French, German, and Spanish translations are stored in the printer. Other translations are available at http://support.lexmark.com.

Print All Guides Prints all the guides

Print Quality Provides information about solving print quality issues

Show 11 more labels / short text on this page
Use To · Margin Size · Backgrounds · Use To · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Menu item Description
Page 253 of the Lexmark MS810 user manual — Image menu
Page 253 · click to enlarge
Page 253

Understanding the printer menus 253

Printing Guide Provides information about loading paper and other specialty media

Media Guide Provides a list of the paper sizes supported in trays and feeders

Print Defects Guide Provides information about resolving print defects

Menu Map Provides a list of the printer control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Moving Guide Provides instructions for safely moving the printer

Supplies Guide Provides part numbers for ordering supplies

Menu item Description

Page 254 of the Lexmark MS810 user manual — Check your first draft for accuracy
Page 254 · click to enlarge
Page 254

Saving money and the environment 254

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see the following:

  • “Using Eco ‑ Mode” on page 79 for non ‑ touch ‑ screen printer models
  • “Using Eco ‑ Mode” on page 129 and “Using Eco ‑ Mode” on page 178 for touch ‑ screen printer models

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 190.

Conserving supplies

Use both sides of the paper

If your printer model supports duplex printing, then you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or from the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or from the Lexmark Toolbar to see how the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.
Page 255 of the Lexmark MS810 user manual — Returning Lexmark cartridges for reuse or recycling
Page 255 · click to enlarge
Page 255

Saving money and the environment 255

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 270.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

Page 256 of the Lexmark MS810 user manual — Recycling
Page 256 · click to enlarge
Page 256

Saving money and the environment 256

3 Follow the instructions on the computer screen.

Page 257 of the Lexmark MS810 user manual — Ordering toner cartridges
Page 257 · click to enlarge
Page 257

Maintaining the printer 257

Maintaining the printer

Ordering supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, initial estimates assume future supplies consumption based on the International Organization for Standardization* test methods and page content.

* Average continuous black declared cartridge yield in accordance with ISO/IEC 19752.

Ordering toner cartridges

  • Estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.

Item Return Program cartridge

For the United States and Canada

* This toner cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812de printer models.

For more information on countries located in each region, visit www.lexmark.com/regions.

Toner Cartridge 521

Page 258 of the Lexmark MS810 user manual — Ordering an imaging unit
Page 258 · click to enlarge
Page 258

Maintaining the printer 258

Lexmark MS810 — Ordering an imaging unit diagram (page 258)
Fig. 175 · Ordering an imaging unit

For the European Union, European Economic Area , and Switzerland

For the Asia Pacific Region (includes Australia and New Zealand)

For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States

* This toner cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812de printer models.

For more information on countries located in each region, visit www.lexmark.com/regions.

1 This cartridge is supported only in MS810n and MS810dn printer models.

2 This cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812de printer models.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 520Z 520ZA

Page 259 of the Lexmark MS810 user manual — Ordering a maintenance kit
Page 259 · click to enlarge
Page 259

Maintaining the printer 259

Ordering staple cartridges

Part name Part number

Ordering a roller kit

For more information on replacing the roller kit, see the instruction sheet that came with the part.

Lexmark roller kit and part number

Printer engine roller maintenance kit 40X7706

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

  • Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser.
  • Using certain types of paper may require more frequent replacement of the maintenance kit.
  • The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.
  • For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.

Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812

Fuser maintenance kit type Part number

Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812

Fuser maintenance kit type Part number

Show 9 more labels / short text on this page
Staple cartridges 25A0013 · Type Part number · Type 00 40X8420 · Type 01 40X8421 · Type 02 40X8422 · Type 03 40X8423 · Type 04 40X8424 · Type 05 40X8425 · Type 06 40X8426
Page 260 of the Lexmark MS810 user manual — Replacing the toner cartridge
Page 260 · click to enlarge
Page 260

Maintaining the printer 260

Fuser maintenance kit type Part number

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Replacing supplies

Replacing the toner cartridge

1 Lift the front cover, and then pull down the multipurpose feeder door.

Lexmark MS810 — Replacing the toner cartridge diagram (page 260)
Fig. 176 · Replacing the toner cartridge

Type 07 40X8427 · Type 08 40X8428 · Type 09 40X8429

Page 261 of the Lexmark MS810 user manual — Storing supplies
Page 261 · click to enlarge
Page 261

Maintaining the printer 261

2 Pull the cartridge out of the printer using the handle.

Lexmark MS810 — Storing supplies diagram (page 261)
Fig. 177 · Storing supplies

3 Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner.

Lexmark MS810 — Storing supplies diagram (page 261)
Fig. 178 · Storing supplies

4 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Lexmark MS810 — Storing supplies diagram (page 261)
Fig. 179 · Storing supplies
Page 262 of the Lexmark MS810 user manual — Replacing the imaging unit
Page 262 · click to enlarge
Page 262

Maintaining the printer 262

5 Close the multipurpose feeder door and the front cover.

Replacing the imaging unit

1 Lift the front cover, and then pull down the multipurpose feeder door.

Page 263 of the Lexmark MS810 user manual — Replacing the imaging unit
Page 263 · click to enlarge
Page 263

Maintaining the printer 263

2 Pull out the toner cartridge from the printer using the handle.

3 Lift the green handle, and then pull out the imaging unit from the printer.

Lexmark MS810 — Replacing the imaging unit diagram (page 263)
Fig. 180 · Replacing the imaging unit
Lexmark MS810 — Replacing the imaging unit diagram (page 263)
Fig. 181 · Replacing the imaging unit

4 Unpack the new imaging unit, and then shake it.

Lexmark MS810 — Replacing the imaging unit diagram (page 263)
Fig. 182 · Replacing the imaging unit

5 Remove all packing material from the imaging unit.

Page 264 of the Lexmark MS810 user manual — Replacing the imaging unit
Page 264 · click to enlarge
Page 264

Maintaining the printer 264

Lexmark MS810 — Replacing the imaging unit diagram (page 264)
Fig. 183 · Replacing the imaging unit

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark MS810 — Replacing the imaging unit diagram (page 264)
Fig. 184 · Replacing the imaging unit

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Page 265 of the Lexmark MS810 user manual — Replacing a staple cartridge
Page 265 · click to enlarge
Page 265

Maintaining the printer 265

8 Close the multipurpose feeder door and the front cover.

Replacing a staple cartridge

1 Open the stapler door.

Lexmark MS810 — Replacing a staple cartridge diagram (page 265)
Fig. 185 · Replacing a staple cartridge

2 Pull down the latch of the staple cartridge holder, and then pull the holder out of the finisher.

Lexmark MS810 — Replacing a staple cartridge diagram (page 265)
Fig. 186 · Replacing a staple cartridge
Lexmark MS810 — Replacing a staple cartridge diagram (page 265)
Fig. 187 · Replacing a staple cartridge
Page 266 of the Lexmark MS810 user manual — Cleaning the printer
Page 266 · click to enlarge
Page 266

Maintaining the printer 266

3 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.

Lexmark MS810 — Cleaning the printer parts diagram (page 266)
Fig. 188 · Cleaning the printer parts

4 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.

Lexmark MS810 — Cleaning the printer parts diagram (page 266)
Fig. 189 · Cleaning the printer parts

5 Push the staple cartridge into the finisher until it clicks into place.

6 Close the stapler door.

Cleaning the printer parts

Cleaning the printer

1 Make sure that the printer is turned off and unplugged from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

Page 267 of the Lexmark MS810 user manual — Before moving the printer
Page 267 · click to enlarge
Page 267

Maintaining the printer 267

4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

5 Make sure all areas of the printer are dry before sending a new print job.

Emptying the hole punch box

1 Pull out the hole punch box.

Lexmark MS810 — Emptying the hole punch box diagram (page 267)
Fig. 190 · Emptying the hole punch box

2 Empty the container.

Lexmark MS810 — Emptying the hole punch box diagram (page 267)
Fig. 191 · Emptying the hole punch box

3 Insert the emptied hole punch box back into the finisher until it clicks into place.

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If two or more optional finishers are installed, then remove the finishers individually from the printer.

– Make sure to remove the topmost finisher first.

Page 268 of the Lexmark MS810 user manual — Emptying the hole punch box
Page 268 · click to enlarge
Page 268

Maintaining the printer 268

– To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

Lexmark MS810 — Emptying the hole punch box diagram (page 268)
Fig. 192 · Emptying the hole punch box
Lexmark MS810 — Emptying the hole punch box diagram (page 268)
Fig. 193 · Emptying the hole punch box
  • If the printer does not have a caster base but is configured with optional trays, then remove the trays.
Lexmark MS810 — Emptying the hole punch box diagram (page 268)
Fig. 194 · Emptying the hole punch box
Lexmark MS810 — Emptying the hole punch box diagram (page 268)
Fig. 195 · Emptying the hole punch box
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
Page 269 of the Lexmark MS810 user manual — Shipping the printer
Page 269 · click to enlarge
Page 269

Maintaining the printer 269

  • Make sure there is adequate clearance around the printer.
  • Use only the power cord provided with this product or the manufacturer's authorized replacement.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 270 of the Lexmark MS810 user manual — Load paper properly
Page 270 · click to enlarge
Page 270

Clearing jams

Carefully select paper and specialty media and load them properly to avoid paper jams. For more information, see “Avoiding jams” on page 270. If jams occur, then follow the steps outlined in this chapter.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.
Lexmark MS810 — Load paper properly diagram (page 270)
Fig. 196 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.

Clearing jams 270

Page 271 of the Lexmark MS810 user manual — Allow the paper to enter the optional mailbox bins properly
Page 271 · click to enlarge
Page 271
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS810 — Clearing jams diagram (page 271)
Fig. 197 · Clearing jams
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.
  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. For more information, see the “Loading paper and specialty media” section of the User’s Guide .

Allow the paper to enter the optional mailbox bins properly

  • Make sure to adjust the bin extender so that the paper size indicators match the size of the paper used.
Lexmark MS810 — Allow the paper to enter the optional mailbox bins properly diagram (page 271)
Fig. 198 · Allow the paper to enter the optional mailbox bins p…

– If the bin extender is shorter than the size of the paper you are printing on, then the paper causes a jam in

the mailbox bin. For example, if you are printing on a legal-size paper and the bin extender is set to letter- size, then a jam occurs. – If the bin extender is longer than the size of the paper you are printing on, then the edges become uneven

and the paper is not stacked properly. For example, if you are printing on a letter-size paper and the bin extender is set to legal-size, then the paper does not stack properly.

Clearing jams 271

Page 272 of the Lexmark MS810 user manual — Understanding jam messages and locations
Page 272 · click to enlarge
Page 272
  • If paper needs to be returned to the mailbox bin, then insert the paper under the bin arm, and then push the paper all the way back.
Lexmark MS810 — Understanding jam messages and locations diagram (page 272)
Fig. 199 · Understanding jam messages and locations

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper or specialty media before loading it.
Lexmark MS810 — Use recommended paper diagram (page 272)
Fig. 200 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the computer or printer control panel.
  • Store paper per manufacturer recommendations.

Understanding jam messages and locations

When a jam occurs, a message indicating the jam location and information to clear the jam appears on the printer display. Open the doors, covers, and trays indicated on the display to remove the jam.

  • When Jam Assist is set to On, Discarding pages appears on the display and the printer flushes blank or pages with partial prints to the standard bin after a jammed page is cleared. Check your printed output for blank pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints jammed pages if adequate printer memory is available.

Clearing jams 272

Page 273 of the Lexmark MS810 user manual — Understanding jam messages and locations
Page 273 · click to enlarge
Page 273
Lexmark MS810 — Understanding jam messages and locations diagram (page 273)
Fig. 201 · Understanding jam messages and locations

3 4 5 6

Lexmark MS810 — Understanding jam messages and locations diagram (page 273)
Fig. 202 · Understanding jam messages and locations
Lexmark MS810 — Understanding jam messages and locations diagram (page 273)
Fig. 203 · Understanding jam messages and locations

Jam location Printer message What to do

1 Staple finisher [x]‑page jam, remove paper, open stapler door. Leave paper in bin. [455– 457]

Remove paper from the stapler bin, open the stapler door, then remove the staple cartridge, and then remove the jammed staples.

2 Standard bin [x]‑page jam, remove standard bin jam. [203]

Remove jammed paper from the standard bin.

3 Inside the printer [x]‑page jam, lift front cover to remove cartridge. [200–201]

Open the front cover and the multipurpose feeder, then remove the toner cartridge and the imaging unit, and then remove the jammed paper.

4 Multipurpose feeder [x]‑page jam, clear manual

Remove all paper from the multipurpose feeder, and then remove the jammed paper.

feeder. [250]

5 Duplex area [x]‑page jam, remove tray 1 to clear duplex. [235–239]

Pull out tray 1 completely, then push down the front duplex flap, and then remove the jammed paper.

6 Trays [x]‑page jam, open tray [x]. [24x] Pull out the indicated tray, and then remove the jammed paper.

7 Output expander [x]‑page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]

Open the rear door of the output expander, and then remove the jammed paper.

8 Upper rear door [x]‑page jam, open upper rear door. [202]

Open the rear door of the printer, and then remove the jammed paper.

Clearing jams 273

Page 274 of the Lexmark MS810 user manual — [x] ‑ page jam, lift front cover to remove cartridge. [200–201]
Page 274 · click to enlarge
Page 274

Jam location Printer message What to do

9 Upper door and rear duplex area

[x]‑page jam, open upper and lower rear door. [231–234]

Open the rear door of the printer and the rear duplex area, and then remove the jammed paper.

10 Mailbox [x]‑page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]

Open the rear door of the mailbox, and then remove the jammed paper.

[x]‑page jam, remove paper, open finisher rear door. Leave paper in bin. [451]

11 Staple finisher rear door

Open the rear door of the staple finisher, and then remove the jammed paper.

[x] ‑ page jam, lift front cover to remove cartridge. [200–201]

1 Lift the front cover, and then pull down the multipurpose feeder door.

2 Lift the green handle, and then pull the toner cartridge out of the printer.

Clearing jams 274

Page 275 of the Lexmark MS810 user manual — [x]-page jam, lift front cover to remove cartridge. [200–201]
Page 275 · click to enlarge
Page 275

3 Place the cartridge aside.

4 Lift the green handle, and then pull the imaging unit out of the printer.

5 Place the imaging unit aside on a flat, smooth surface.

6 Pull the jammed paper gently to the right, and then remove it from the printer.

Lexmark MS810 — [x]-page jam, lift front cover to remove cartridge. [200–201] diagram (page 275)
Fig. 204 · [x]-page jam, lift front cover to remove cartridge.…

7 Install the imaging unit.

Clearing jams 275

Page 276 of the Lexmark MS810 user manual — [x] ‑ page jam, open upper rear door. [202]
Page 276 · click to enlarge
Page 276

8 Insert the cartridge into the printer, and then push the green handle back into place.

  • Align the arrows on the guides of the toner cartridge with the arrows in the printer.
  • Make sure the cartridge is fully pushed in.

9 Close the multipurpose feeder door and the front cover.

10 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open upper rear door. [202]

Clearing jams 276

Page 277 of the Lexmark MS810 user manual — [x] ‑ page jam, open upper and lower rear door. [231–234]
Page 277 · click to enlarge
Page 277

1 Pull down the rear door.

Lexmark MS810 — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 277)
Fig. 205 · [x]-page jam, open upper and lower rear door. [231–2…

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the rear door.

4 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open upper and lower rear door. [231–234]

Clearing jams 277

Page 278 of the Lexmark MS810 user manual — [x]-page jam, open upper and lower rear door. [231–234]
Page 278 · click to enlarge
Page 278

1 Pull down the rear door.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the rear door.

Clearing jams 278

Page 279 of the Lexmark MS810 user manual — [x]-page jam, open upper and lower rear door. [231–234]
Page 279 · click to enlarge
Page 279

4 Push the back of the standard tray.

Lexmark MS810 — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 279)
Fig. 206 · [x]-page jam, open upper and lower rear door. [231–2…

5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out.

Lexmark MS810 — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 279)
Fig. 207 · [x]-page jam, open upper and lower rear door. [231–2…
Lexmark MS810 — [x]-page jam, open upper and lower rear door. [231–234] diagram (page 279)
Fig. 208 · [x]-page jam, open upper and lower rear door. [231–2…

6 Insert the standard tray.

Clearing jams 279

Page 280 of the Lexmark MS810 user manual — [x] ‑ page jam, remove tray 1 to clear duplex. [235–239]
Page 280 · click to enlarge
Page 280

7 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, remove standard bin jam. [203]

1 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS810 — [x] ‑ page jam, remove standard bin jam. [203] diagram (page 280)
Fig. 209 · [x] ‑ page jam, remove standard bin jam. [203]

2 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, remove tray 1 to clear duplex. [235–239]

1 Pull out the tray completely.

Lexmark MS810 — [x] ‑ page jam, remove tray 1 to clear duplex. [235–239] diagram (page 280)
Fig. 210 · [x] ‑ page jam, remove tray 1 to clear duplex. [235–…
Lexmark MS810 — [x] ‑ page jam, remove tray 1 to clear duplex. [235–239] diagram (page 280)
Fig. 211 · [x] ‑ page jam, remove tray 1 to clear duplex. [235–…

2 Push down the front duplex flap, then firmly grasp the jammed paper, and then gently pull the paper to the right and out of the printer.

Clearing jams 280

Page 281 of the Lexmark MS810 user manual — [x] ‑ page jam, open tray [x]. [24x]
Page 281 · click to enlarge
Page 281
Lexmark MS810 — [x]-page jam, open tray [x]. [24x] diagram (page 281)
Fig. 212 · [x]-page jam, open tray [x]. [24x]

3 Insert the tray.

4 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open tray [x]. [24x]

1 Check which tray is indicated on the printer display, and then pull the tray.

Lexmark MS810 — [x] ‑ page jam, open tray [x]. [24x] diagram (page 281)
Fig. 213 · [x] ‑ page jam, open tray [x]. [24x]

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 281

Page 282 of the Lexmark MS810 user manual — [x] ‑ page jam, clear manual feeder. [250]
Page 282 · click to enlarge
Page 282

3 Insert the tray.

4 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, clear manual feeder. [250]

1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS810 — [x] ‑ page jam, clear manual feeder. [250] diagram (page 282)
Fig. 214 · [x] ‑ page jam, clear manual feeder. [250]

Clearing jams 282

Page 283 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]
Page 283 · click to enlarge
Page 283

2 Flex the sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

3 Reload paper into the multipurpose feeder.

4 Slide the paper guide until it lightly rests against the edge of the paper.

Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 283)
Fig. 215 · [x]-page jam, remove paper, open stapler door. Leave…
Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 283)
Fig. 216 · [x]-page jam, remove paper, open stapler door. Leave…

5 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x]‑page jam, remove paper, open stapler door. Leave paper in bin. [455–457]

1 From the stapler bin, firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 283)
Fig. 217 · [x]-page jam, remove paper, open stapler door. Leave…

Clearing jams 283

Page 284 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]
Page 284 · click to enlarge
Page 284

2 Open the stapler door.

3 Pull down the latch of the staple cartridge holder, and then pull the holder out of the printer.

4 Use the metal tab to lift the staple guard, and then remove any loose staples.

Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 284)
Fig. 218 · [x]-page jam, remove paper, open stapler door. Leave…

Clearing jams 284

Page 285 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]
Page 285 · click to enlarge
Page 285

5 Press down the staple guard until it clicks into place.

Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 285)
Fig. 219 · [x]-page jam, remove paper, open stapler door. Leave…

6 Press the staples against the metal bracket.

Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 285)
Fig. 220 · [x]-page jam, remove paper, open stapler door. Leave…

Clearing jams 285

Page 286 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]
Page 286 · click to enlarge
Page 286
Lexmark MS810 — [x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457] diagram (page 286)
Fig. 221 · [x]-page jam, remove paper, open stapler door. Leave…

7 Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place.

8 Close the stapler door.

9 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

Clearing jams 286

Page 287 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]
Page 287 · click to enlarge
Page 287

[x]‑page jam, remove paper, open finisher rear door. Leave paper in bin. [451]

1 Open the rear staple finisher door.

Lexmark MS810 — [x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451] diagram (page 287)
Fig. 222 · [x]-page jam, remove paper, open finisher rear door.…

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the staple finisher door.

Clearing jams 287

Page 288 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]
Page 288 · click to enlarge
Page 288

4 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

[x]‑page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]

1 Open the rear output expander door.

Lexmark MS810 — [x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx] diagram (page 288)
Fig. 223 · [x]-page jam, remove paper, open expander rear door.…

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 288

Page 289 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]
Page 289 · click to enlarge
Page 289

3 Close the rear output expander door.

4 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

Clearing jams 289

Page 290 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]
Page 290 · click to enlarge
Page 290

[x]‑page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]

1 Open the rear mailbox door.

Lexmark MS810 — [x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx] diagram (page 290)
Fig. 224 · [x]-page jam, remove paper, open mailbox rear door.…

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the rear mailbox door.

Clearing jams 290

Page 291 of the Lexmark MS810 user manual — [x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]
Page 291 · click to enlarge
Page 291

4 If the jam is in the mailbox bin, then firmly grasp the jammed paper, and then gently pull it out.

Lexmark MS810 — [x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx] diagram (page 291)
Fig. 225 · [x]-page jam, remove paper, open mailbox rear door.…

5 Do either of the following to clear the message and continue printing:

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear the jam, press OK > .

Clearing jams 291

Page 292 of the Lexmark MS810 user manual — Change [paper source] to [custom string] load [orientation]
Page 292 · click to enlarge
Page 292

Troubleshooting

Understanding the printer messages

Cartridge, imaging unit mismatch [41.xy]

1 Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies.

2 Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.

  • Use a MICR toner cartridge and imaging unit for printing checks and other similar documents.
  • Use a non-MICR toner cartridge and imaging unit for regular print jobs.

Cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, select Continue on the printer control panel to clear the message

and continue printing. For non‑touch‑screen printer models, press to confirm.

Cartridge nearly low [88.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Touch Cancel job to cancel the print job.

Troubleshooting 292

Page 293 of the Lexmark MS810 user manual — Check tray [x] connection
Page 293 · click to enlarge
Page 293

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Check tray [x] connection

Try one or more of the following:

  • Turn off the printer, and then turn it back on.

If the error occurs a second time, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified tray. 4 Reattach the tray. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.

If the error occurs again, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the tray. 4 Contact customer support.

Troubleshooting 293

Page 294 of the Lexmark MS810 user manual — Defective flash detected [51]
Page 294 · click to enlarge
Page 294
  • To clear the message and resume the job, select Continue on the printer control panel. For non-touch-screen printer

models, press to confirm.

Close door or insert cartridge

The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers.

Close front door

Close the front door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:

  • From the printer control panel, select Continue to ignore the message and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm.

  • Cancel the current print job. For non ‑ touch ‑ screen printer models, press to confirm.
  • Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

  • The printer firmware has been updated.
  • The tray for the print job is removed.
  • The print job is sent from a flash drive that is no longer attached to the USB port.
  • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Defective flash detected [51]

Try one or more of the following:

  • Replace the defective flash memory card.
  • From the printer control panel, select Continue to ignore the message and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm. • Cancel the current print job.

Troubleshooting 294

Page 295 of the Lexmark MS810 user manual — Imaging unit very low, [x] estimated pages remain [84.xy]
Page 295 · click to enlarge
Page 295

Disk must be formatted for use in this device

From the printer control panel, select Format disk to format the printer hard disk and clear the message.

Disk near full. Securely clearing disk space.

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • Delete fonts, macros, and other data stored in the printer hard disk.
  • Install a hard disk with higher capacity.

Empty the hole punch box

Try one or more of the following:

  • Empty the hole punch box.
  • Select Continue on the printer control panel to clear the message and continue printing.
  • Cancel the print job.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear the message

and continue printing. For non‑touch‑screen printer models, press to confirm.

Imaging unit nearly low [84.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide.

Troubleshooting 295

Page 296 of the Lexmark MS810 user manual — Insert staple cartridge
Page 296 · click to enlarge
Page 296

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Incompatible output bin [x] [59]

Try one or more of the following:

  • Remove the indicated bin.
  • Select Continue on the printer control panel to clear the message and continue printing without using the specified

bin. For non-touch-screen printer models, press to confirm.

Incompatible tray [x] [59]

Try one or more of the following:

  • Remove the specified tray.
  • From the printer control panel, select Continue to clear the message and continue printing without using the

specified tray. For non-touch-screen printer models, press to confirm.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

  • Load the correct size of paper in the tray.
  • From the printer control panel, select Continue to clear the message and print using a different tray. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Check the tray length and width guides and make sure the paper is loaded properly in the tray.
  • Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
  • Make sure the paper size and type are specified in the Paper menu on the printer control panel.
  • Make sure that the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Cancel the print job.

Insert hole punch box

Insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.

For non-touch-screen printer models, press to confirm.

Insert staple cartridge

Try one or more of the following:

  • Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.
  • Select Continue to clear the message and print without using the staple finisher. For non-touch-screen printer

models, press to confirm.

Troubleshooting 296

Page 297 of the Lexmark MS810 user manual — Insufficient memory, some Held Jobs were deleted [37]
Page 297 · click to enlarge
Page 297

Insert Tray [x]

Try one or more of the following:

  • Insert the specified tray into the printer.
  • Cancel the print job.
  • Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.

Install bin [x]

Try one or more of the following:

  • Install the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified bin. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.
  • Reset active bin

Install Tray [x]

Try one or more of the following:

  • Install the specified tray: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.
  • Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

  • From the printer control panel, select Continue to stop the defragmentation and continue printing. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Delete fonts, macros, and other data from the printer memory.
  • Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.

Troubleshooting 297

Page 298 of the Lexmark MS810 user manual — Load [paper source] with [custom string] [paper orientation]
Page 298 · click to enlarge
Page 298

Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press

to confirm. • Delete other held jobs to free up additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:

  • From the printer control panel, select Continue to print the part of the job already stored and begin collating the

rest of the print job. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or select Continue on the printer control panel to disable Resource Save, clear the

message, and continue printing. For non‑touch‑screen printer models, press to confirm.

Load staples

Try one or more of the following:

  • Replace or insert the specified staple cartridge in the finisher.
  • Select Continue to clear the message and continue printing.
  • Cancel the print job.

Load [paper source] with [custom string] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel.

For non‑touch‑screen printer models, press to confirm.

Troubleshooting 298

Page 299 of the Lexmark MS810 user manual — Load manual feeder with [custom string] [paper orientation]
Page 299 · click to enlarge
Page 299

Load [paper source] with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel.

For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size of paper.
  • To use the tray or feeder that has the correct size of paper, select Finished loading paper on the printer control

panel. For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray or feeder that has the correct size and type of paper, select Finished loading paper on the printer

control panel. For non‑touch‑screen printer models, press to confirm.

Load manual feeder with [custom string] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Troubleshooting 299

Page 300 of the Lexmark MS810 user manual — Maintenance kit nearly low [80.xy]
Page 300 · click to enlarge
Page 300

Load manual feeder with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load manual feeder with [paper size] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load manual feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue to clear the message and

continue printing. For non‑touch‑screen printer models, press to confirm.

Maintenance kit nearly low [80.xy]

For more information, contact customer support at http://support.lexmark.com or your service representative. If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Troubleshooting 300

Page 301 of the Lexmark MS810 user manual — Non ‑ Lexmark [supply type], see User’s Guide [33.xy]
Page 301 · click to enlarge
Page 301

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Memory full [38]

Try one or more of the following:

  • From the printer control panel, select Cancel job to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Install additional printer memory.

Network [x] software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer models, press
  • to confirm.
  • Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or print server. For more information, contact customer support.

Non ‑ Lexmark [supply type], see User’s Guide [33.xy]

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, press

and hold and the # button on the printer control panel simultaneously for 15 seconds.

For non‑touch‑screen printer models, press and on the printer control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install a genuine Lexmark supply or part.

Troubleshooting 301

Page 302 of the Lexmark MS810 user manual — Reattach bin [x]
Page 302 · click to enlarge
Page 302

Not enough free space in flash memory for resources [52]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message and continue printing. For non ‑ touch ‑ screen
  • printer models, press to confirm.
  • Delete fonts, macros, and other data stored in the flash memory.
  • Upgrade to a larger capacity flash memory card.

PPDS font error [50]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm. • If the printer cannot find the requested font, then from the printer control panel, navigate to:

PPDS menu > Best Fit > On

The printer will find a similar font and reformat the affected text. • Cancel the current print job.

Paper changes needed

Try one or more of the following:

  • Select Use current supplies on the printer control panel to clear the message and continue printing.

For non-touch-screen printer models, press to confirm. • Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

The printer discards any data received through the parallel port. • Select Reset active bin to reset the bin for a linked set of bins.

Reattach bin [x]

Try one or more of the following:

  • Turn off the printer, and then turn it back on.
  • Reattach the specified bin. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet.

Troubleshooting 302

Page 303 of the Lexmark MS810 user manual — Reinstall missing or unresponsive cartridge [31.xy]
Page 303 · click to enlarge
Page 303
  • 3 Remove the specified bin. 4 Reattach the bin. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bin. 4 Contact customer support.
  • Select Continue on the printer control panel to clear the message and print without using the specified bin. For

non-touch-screen printer models, press to confirm.

Reattach bins [x] – [y]

Try one or more of the following:

  • Turn off the printer, and then turn it back on.
  • Reattach the specified bins: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bins. 4 Reattach the bins. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bins: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bins. 4 Contact customer support.

Select Continue on the printer control panel to clear the message and print without using the specified bins. For

non-touch-screen printer models, press to confirm.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

  • Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Troubleshooting 303

Page 304 of the Lexmark MS810 user manual — Remove paper from [linked set bin name]
Page 304 · click to enlarge
Page 304

Reinstall missing or unresponsive fuser [31.xy]

Try one or more of the following:

  • Remove the unresponsive fuser, and then reinstall it.

For more information on installing the fuser, see the instruction sheet that came with the part.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide. • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Remove defective disk [61]

Remove and replace the defective printer hard disk.

Remove packaging material, [area name]

1 Remove any remaining packaging material from the specified location.

2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to confirm.

Remove paper from all bins

Bins have reached their capacity. Remove paper from all bins to clear the message and continue printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Remove paper from bin [x]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Remove paper from [linked set bin name]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.

Troubleshooting 304

Page 305 of the Lexmark MS810 user manual — Replace imaging unit, 0 estimated pages remain [84.xy]
Page 305 · click to enlarge
Page 305

If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

List of printer and toner cartridge regions

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

  • The x and y values are the .xy of the error code shown on the printer control panel.
  • The x and y values must match for printing to continue.

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Show 5 more labels / short text on this page
Troubleshooting 305 · Region number Region · 0 Global · 4 Latin America · 9 Invalid
Page 306 of the Lexmark MS810 user manual — Restore held jobs?
Page 306 · click to enlarge
Page 306

Replace maintenance kit, 0 estimated pages remain [80.xy]

Contact customer support at http://support.lexmark.com or your service representative, and then report the message. The printer is scheduled for maintenance.

Replace roller kit [81.xx]

1 Replace the roller kit. For more information, see the instruction sheet that came with the part.

2 Press to clear the message and continue printing.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace unsupported fuser [32.xy]

Remove the fuser, and then install a supported one. For more information, see the instruction sheet that came with the part.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Restore held jobs?

Try one or more of the following:

  • Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For

non‑touch‑screen printer models, press to confirm. • Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer models, press

to confirm.

Troubleshooting 306

Page 307 of the Lexmark MS810 user manual — Too many bins attached [58]
Page 307 · click to enlarge
Page 307

Serial port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • The printer discards any data received through the specified serial port.
  • Select Reset active bin to reset the active bin for a linked set of bins.
  • Make sure the Serial Buffer menu is set to Enabled.

Some held jobs were not restored

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Standard network software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer models, press
  • to confirm.
  • Turn off the printer and then turn it back on.
  • Update the network firmware in the printer or print server. For more information, contact customer support.

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

  • The printer discards any data received through the USB port.
  • Make sure the USB Buffer menu is not set to Disabled.

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

Too many bins attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra bins.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Troubleshooting 307

Page 308 of the Lexmark MS810 user manual — Unformatted flash detected [53]
Page 308 · click to enlarge
Page 308

Too many disks installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra printer hard disks.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many flash options installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

  • From the printer control, select Continue to stop the defragmentation and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm. • Format the flash memory.

Troubleshooting 308

Page 309 of the Lexmark MS810 user manual — Solving printer problems
Page 309 · click to enlarge
Page 309

Unsupported disk

1 Remove the unsupported disk, and then install a supported one.

2 Select Continue to clear the message and continue printing. For non‑touch screen printer models, press to confirm.

Unsupported option in slot [x] [55]

1 Turn off the printer.

2 Unplug the power cord from the wall outlet.

3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

USB port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • The printer discards any data received through the specified serial port.
  • Select Reset active bin to reset the active bin for a linked set of bins.
  • Make sure the USB Buffer menu is enabled.

Solving printer problems

  • “Printer does not respond” on page 310
  • “Printing problems” on page 312
  • “Hardware and internal option problems” on page 319
  • “Paper feed problems” on page 323
  • “Print quality problems” on page 325

Troubleshooting 309

Page 310 of the Lexmark MS810 user manual — The printer is not responding
Page 310 · click to enlarge
Page 310

Printer does not respond

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Go to step 6. Make sure to match the following:

Check if the cables connecting the printer and the computer are inserted in the correct ports.

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Step 6 Make sure the electrical outlet is not turned off by a switch or breaker.

Turn on the switch or reset the breaker.

Go to step 7.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Show 8 more labels / short text on this page
Troubleshooting 310 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 7
Page 311 of the Lexmark MS810 user manual — Printer display is blank
Page 311 · click to enlarge
Page 311

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Step 10 Check if you have selected the correct port settings in the printer driver.

Go to step 11. Use correct printer driver settings.

Are the port settings correct?

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Printer display is blank

The problem is solved. Go to step 2.

Press the Sleep button on the printer control panel.

Does Ready appear on the printer display?

The problem is solved. Turn off the printer, and then contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Do Please wait and Ready appear on the printer display?

Show 9 more labels / short text on this page
Troubleshooting 311 · Action Yes No · Step 8 · Step 9 · Step 11 · Step 12 · Action Yes No · Step 1 · Step 2
Page 312 of the Lexmark MS810 user manual — Envelope seals when printing
Page 312 · click to enlarge
Page 312

Printing problems

Confidential and other held jobs do not print

The problem is solved. Go to step 2.

a From the printer control panel, open the Held Jobs folder, and then

verify that your print job is listed. b Resend the print job.

For more information, see“Printing confidential and other held jobs” on page 74 for non‑touch‑screen printer models.

For touch‑screen printer models, see “Printing confidential and other held jobs” on page 124 or “Printing confidential and other held jobs” on page 173.

Did the jobs print?

The problem is solved. Go to step 3.

Do one or more of the following:

  • Delete the print job, and then resend it.
  • If you are printing PDF files, then generate a new file, and then print it again.

Did the jobs print?

The problem is solved. Contact customer support.

a Increase the printer memory. Do one or more of the following:

  • Delete some print jobs.
  • Install additional printer memory. b Resend the print job.

Did the jobs print?

Envelope seals when printing

a Use envelopes that have been stored in a dry environment.

Contact customer support.

The problem is solved.

Does the envelope seal when printing?

Show 6 more labels / short text on this page
Troubleshooting 312 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 313 of the Lexmark MS810 user manual — Error message about reading the flash drive appears
Page 313 · click to enlarge
Page 313

Error message about reading the flash drive appears

Go to step 2. Insert the flash drive into the front USB slot.

Check if the flash drive is inserted into the front USB slot.

Is the flash drive inserted into the front USB slot?

Step 2 Check if the indicator light on the printer control panel is blinking green.

Wait until the printer is ready, then view the held jobs list, and then print the documents.

Go to step 3.

Is the indicator light blinking green?

Go to step 4. The problem is solved.

a Check for an error message on the display. b Clear the message.

Does the error message still appear?

Go to step 5. The problem is solved.

Check if the flash drive is supported.

For more information on tested and approved USB flash drives, see “Supported flash drives and file types” on page 71 for non‑touch‑screen printer models. For touch‑screen printer models, see “Supported flash drives and file types” on page 121 and “Supported flash drives and file types” on page 171.

Does the error message still appear?

Contact customer support.

The problem is solved.

Check if the USB slot is disabled by the system support person.

Does the error message still appear?

Show 6 more labels / short text on this page
Troubleshooting 313 · Action Yes No · Step 1 · Step 3 · Step 4 · Step 5
Page 314 of the Lexmark MS810 user manual — Job prints from the wrong tray or on the wrong paper
Page 314 · click to enlarge
Page 314

Incorrect characters print

Deactivate Hex Trace mode.

Go to step 2.

Make sure the printer is not in Hex Trace mode.

Is the printer in Hex Trace mode?

Contact customer support.

The problem is solved.

a From the printer control panel, select Standard Network or

Network [x], and then set SmartSwitch to On. b Resend the print job.

Do incorrect characters print?

Job prints from the wrong tray or on the wrong paper

The problem is solved. Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 3.

a From the Paper menu on the printer control panel, set the paper size

and type to match the paper loaded in the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 4.

a Depending on your operating system, open Printing Preferences or

the Print dialog, and then specify the paper type. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Contact customer support.

a Check if the trays are not linked. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Show 9 more labels / short text on this page
Troubleshooting 314 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 315 of the Lexmark MS810 user manual — Large jobs do not collate
Page 315 · click to enlarge
Page 315

Large jobs do not collate

The problem is solved. Go to step 2.

a From the Finishing menu on the printer control panel, set Collate to

(1,2,3) (1,2,3). b Resend the print job.

Did the job print and collate correctly?

The problem is solved. Go to step 3.

a From the printer software, set Collate to (1,2,3) (1,2,3).

Did the job print and collate correctly?

The problem is solved. Contact customer support.

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Did the job print and collate correctly?

Multiple‑language PDF files do not print

The problem is solved. Go to step 2.

a Check if the print options for the PDF output are set to embed all fonts. b Generate a new PDF file, and then resend the print job.

Do the files print?

The problem is solved. Contact customer support.

a Open the document you want to print in Adobe Acrobat. b Click File > Print > Advanced > Print As Image > OK > OK.

Do the files print?

Show 8 more labels / short text on this page
Troubleshooting 315 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 316 of the Lexmark MS810 user manual — Print jobs do not print
Page 316 · click to enlarge
Page 316

Print job takes longer than expected

The problem is solved. Go to step 2.

Change the environmental settings of the printer.

a From the printer control panel, navigate to:

Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off.

Did the job print?

The problem is solved. Go to step 3.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the job

Did the job print?

The problem is solved. Go to step 4.

a Remove held jobs stored in the printer memory. b Resend the print job.

Did the job print?

The problem is solved. Go to step 5.

a Disable the Page Protect feature.

From the printer control panel, navigate to: Settings > General Settings > Print Recovery > Page Protect > Off b Resend the print job.

Did the job print?

The problem is solved. Contact customer support.

Install additional printer memory, and then resend the print job.

Did the job print?

Print jobs do not print

The problem is solved. Go to step 2.

a From the document you are trying to print, open the Print dialog and

check if you have selected the correct printer.

Do the jobs print?

Show 9 more labels / short text on this page
Troubleshooting 316 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Action Yes No · Step 1
Page 317 of the Lexmark MS810 user manual — Printing slows down
Page 317 · click to enlarge
Page 317

The problem is solved. Go to step 3.

a Check if the printer is plugged in and turned on, and if Ready appears

on the printer display. b Resend the print job.

Do the jobs print?

The problem is solved. Go to step 4.

If an error message appears on the printer display, then clear the message.

Do the jobs print?

The problem is solved. Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if the

cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved. Go to step 6.

a Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

The problem is solved. Contact customer support.

a Remove, and then reinstall the printer software. For more

information, see “Installing the printer software” on page 35.

Do the jobs print?

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.
Show 7 more labels / short text on this page
Troubleshooting 317 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 318 of the Lexmark MS810 user manual — Tray linking does not work
Page 318 · click to enlarge
Page 318

The problem is solved. Go to step 2.

a Make sure the size of the paper loaded in the tray matches the fuser

type.

Does the print speed increase?

The problem is solved. Contact customer support.

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Does the print speed increase?

Tray linking does not work

  • The trays can detect paper length.
  • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu.

The problem is solved. Go to step 2.

a Open the trays, and then check if they contain paper of the same size

and type.

  • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. b Resend the print job.

Do the trays link correctly?

The problem is solved. Contact customer support.

a From the printer control panel, set the paper size and type in the Paper

menu to match the paper loaded in the trays to be linked.

Do the trays link correctly?

Show 7 more labels / short text on this page
Troubleshooting 318 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 319 of the Lexmark MS810 user manual — 2100-sheet tray problems
Page 319 · click to enlarge
Page 319

Unexpected page breaks occur

The problem is solved. Go to step 2.

Adjust the print timeout settings.

a From the printer control panel, navigate to:

Settings > General Settings > Timeouts > Print Timeout b Select a higher setting and then, depending on your printer model,

select or Submit. c Resend the print job.

Did the file print correctly?

The problem is solved. Contact customer support.

a Check the original file for manual page breaks. b Resend the print job.

Did the file print correctly?

Hardware and internal option problems

2100-sheet tray problems

The problem is solved. Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type.
  • Check if the paper or specialty media meets specifications and is not damaged. b Insert the tray properly.

Does the tray operate properly?

The problem is solved. Go to step 3.

Turn off the printer, then wait about 10 seconds, and then turn it back on.

Does the tray operate properly?

Show 7 more labels / short text on this page
Troubleshooting 319 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 320 of the Lexmark MS810 user manual — Cannot detect internal option
Page 320 · click to enlarge
Page 320

Go to step 4. For more information, see the setup sheet that came with the 2100-sheet tray.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

Go to step 5. Manually add the tray in the printer driver.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

The problem is solved. Contact customer support.

Check if the tray is selected.

From the application you are using, select the tray. If you are using Mac OS X version 9, then make sure the printer is set up in Chooser.

Does the tray operate properly?

Cannot detect internal option

The problem is solved. Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?

Go to step 3. Connect the internal option to the controller board.

Check if the internal option is properly installed in the controller board.

a Turn off the printer using the power switch, and then unplug the power

cord from the electrical outlet. b Make sure the internal option is installed in the appropriate connector

in the controller board. c Connect the power cord to the printer, then to a properly grounded

electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

Show 9 more labels / short text on this page
Troubleshooting 320 · Action Yes No · Step 3 · Step 4 · Step 5 · Action Yes No · Step 1 · Step 2 · Step 3
Page 321 of the Lexmark MS810 user manual — Internal Solutions Port does not operate correctly
Page 321 · click to enlarge
Page 321

The problem is solved. Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 36. b Resend the print job.

Does the internal option operate correctly?

Internal print server does not operate correctly

Go to step 2. Check if the internal print server is supported by the printer.

Reinstall the internal print server.

a Remove, and then install the internal print server. For more

information, see “Installing an Internal Solutions Port” on page 17. b Print a menu settings page, and then check if the internal print server

is listed in the Installed Features list.

Is the internal print server listed in the Installed Features list?

The problem is solved. Contact customer support.

Check the cable and the internal print server connection.

Use the correct cable, and then check if it is securely connected to the internal print server.

Does the internal print server operate correctly?

Internal Solutions Port does not operate correctly

Go to step 2. Check if you have a supported ISP.

Make sure the Internal Solutions Port (ISP) is installed.

a Install the ISP. For more information, see “Installing an Internal

Solutions Port” on page 17. b Print a menu settings page, and then check if the ISP is listed in the

Installed Features list.

Is the ISP listed in the Installed Features list?

Show 8 more labels / short text on this page
Troubleshooting 321 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 322 of the Lexmark MS810 user manual — Tray problems
Page 322 · click to enlarge
Page 322

The problem is solved. Contact customer support.

Check the cable and the ISP connection.

a Use the correct cable, and then make sure it is securely connected to

the ISP. b Check if the ISP solution interface cable is securely connected into the

receptacle of the controller board.

Does the Internal Solutions Port operate correctly?

Tray problems

The problem is solved. Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved. Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn the

printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed and recognized by the printer.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

Show 7 more labels / short text on this page
Troubleshooting 322 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 323 of the Lexmark MS810 user manual — Jammed pages are not reprinted
Page 323 · click to enlarge
Page 323

The problem is solved. Contact customer support.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

USB/parallel interface card does not operate correctly

Go to step 2. Check if you have a supported USB or parallel interface card.

Make sure the USB or parallel interface card is installed.

a Install the USB or parallel interface card. For more information, see

“Installing an Internal Solutions Port” on page 17. b Print a menu settings page, and then check if the USB or parallel

interface card is listed in the Installed Features list.

Is the USB or parallel interface card listed in the Installed Features list?

The problem is solved. Contact customer support.

Check the cable and the USB or parallel interface card connection.

Use the correct cable, and then make sure it is securely connected to the USB or parallel interface card.

Does the USB or parallel interface card operate correctly?

Paper feed problems

Jammed pages are not reprinted

a Turn on jam recovery.

The problem is solved. Contact customer support.

1 From the printer control panel, navigate to:

Settings > General Settings > Print Recovery > Jam Recovery 2 Select On or Auto.

3 Depending on your printer model, press or touch Submit. b Resend the pages that did not print.

Were the jammed pages reprinted?

Show 7 more labels / short text on this page
Troubleshooting 323 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 324 of the Lexmark MS810 user manual — Paper jam message remains after jam is cleared
Page 324 · click to enlarge
Page 324

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see “Avoiding

jams” on page 270. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

a Do either of the following:

Contact customer support.

The problem is solved.

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > > Clear

the jam, press OK > . b Follow the instructions on the printer display.

Does the paper jam message remain?

Show 6 more labels / short text on this page
Troubleshooting 324 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 325 of the Lexmark MS810 user manual — Clipped pages or images
Page 325 · click to enlarge
Page 325

Print quality problems

Characters have jagged or uneven edges

Lexmark MS810 — Characters have jagged or uneven edges diagram (page 325)
Fig. 226 · Characters have jagged or uneven edges

Go to step 2. Select a font that is supported by the printer.

a Print a font sample list to check if the fonts you are using are supported

Menus > Reports > Print Fonts 2 Select PCL Fonts or PostScript Fonts. b Resend the print job.

Are you using fonts that are supported by the printer?

Check if the fonts installed on the computer are supported by the printer.

Are the fonts installed on the computer supported by the printer?

Clipped pages or images

Lexmark MS810 — Clipped pages or images diagram (page 325)
Fig. 227 · Clipped pages or images

a Move the width and length guides in the tray to the correct positions

for the paper loaded. b Resend the print job.

Troubleshooting 325

Page 326 of the Lexmark MS810 user manual — Compressed images appear on prints
Page 326 · click to enlarge
Page 326

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Do the paper size and type match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Compressed images appear on prints

The problem is solved. Go to step 2.

a Make sure the size of the paper loaded in the tray matches the fuser

type.

Do compressed images still appear?

Show 7 more labels / short text on this page
Troubleshooting 326 · Action Yes No · Step 2 · Step 3 · Step 4 · Action Yes No · Step 1
Page 327 of the Lexmark MS810 user manual — Gray background on prints
Page 327 · click to enlarge
Page 327
Lexmark MS810 — Gray background on prints diagram (page 327)
Fig. 228 · Gray background on prints

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Gray background on prints

Lexmark MS810 — Gray background on prints diagram (page 327)
Fig. 229 · Gray background on prints

a From the Quality Menu on the printer control panel, decrease the

a Remove the toner cartridge. b Remove the imaging unit.

Replace the imaging unit, and then resend the print job.

Troubleshooting 327

Page 328 of the Lexmark MS810 user manual — Horizontal voids appear on prints
Page 328 · click to enlarge
Page 328

Horizontal voids appear on prints

Lexmark MS810 — Horizontal voids appear on prints diagram (page 328)
Fig. 230 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Replace the imaging unit, and then resend the print job.

Troubleshooting 328

Page 329 of the Lexmark MS810 user manual — Incorrect margins on prints
Page 329 · click to enlarge
Page 329

Incorrect margins on prints

ABC DEF ABC DEF

The problem is solved. Go to step 2.

a Move the width and length guides in the tray to the correct positions

for the paper size loaded. b Resend the print job.

Are the margins correct?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Does the paper size match the paper loaded in the tray?

The problem is solved. Contact customer support.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Show 5 more labels / short text on this page
Troubleshooting 329 · Action Yes No · Step 1 · Step 2 · Step 3
Page 330 of the Lexmark MS810 user manual — Print irregularities
Page 330 · click to enlarge
Page 330

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the paper still curled?

Go to step 5. The problem is solved.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Print irregularities

) ) ABCDE

ABCDE ABCDE

Show 9 more labels / short text on this page
Troubleshooting 330 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Leading edge · Trailing edge
Page 331 of the Lexmark MS810 user manual — Paper curl
Page 331 · click to enlarge
Page 331

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded in the tray. b Resend the print job.

Do print irregularities still appear?

Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do print irregularities still appear?

From the printer control panel, set the paper texture in the Paper menu to match the paper loaded in the tray.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do print irregularities still appear?

Show 8 more labels / short text on this page
Troubleshooting 331 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 332 of the Lexmark MS810 user manual — Print is too dark
Page 332 · click to enlarge
Page 332

Print is too dark

ABC DEF ABC DEF

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, reduce the toner

darkness.

Is the print still too dark?

Go to step 3. Do one or more of the following:

a From the printer control panel, set the paper type, texture and weight

in the Paper menu to match the paper loaded in the tray. b Resend the print job.

  • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper type, texture and weight specified in the tray settings.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too dark?

Step 4 Check if the paper loaded in the tray has texture or rough finishes.

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Are you printing on textured or rough paper?

Show 5 more labels / short text on this page
Troubleshooting 332 · Action Yes No · Step 1 · Step 2 · Step 3
Page 333 of the Lexmark MS810 user manual — Print is too light
Page 333 · click to enlarge
Page 333

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Print is too light

ABC DEF

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, increase the toner

darkness.

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too light?

Show 8 more labels / short text on this page
Troubleshooting 333 · Action Yes No · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3
Page 334 of the Lexmark MS810 user manual — Printer is printing blank pages
Page 334 · click to enlarge
Page 334

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Go to step 7. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Printer is printing blank pages

Show 6 more labels / short text on this page
Troubleshooting 334 · Action Yes No · Step 4 · Step 5 · Step 6 · Step 7
Page 335 of the Lexmark MS810 user manual — Printer is printing solid black pages
Page 335 · click to enlarge
Page 335

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer still printing blank pages?

Printer is printing solid black pages

Show 5 more labels / short text on this page
Troubleshooting 335 · Action Yes No · Step 1 · Step 2 · Step 3
Page 336 of the Lexmark MS810 user manual — Repeating defects appear on prints
Page 336 · click to enlarge
Page 336

Go to step 2. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Is the printer printing solid black pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Repeating defects appear on prints

Go to step 2. The problem is solved.

a Replace the imaging unit if the distance between the defects is equal

to any of the following:

  • 47.8 mm (1.88 in.)
  • 96.8 mm (3.81 in.)
  • 28.5 mm (1.12 in.) b Resend the print job.

Do repeating defects still appear on prints?

Contact customer support.

The problem is solved.

a Replace the fuser if the distance between the defects is equal to either

of the following:

  • 94.25 mm (3.71 in.)
  • 95.2 mm (3.75 in.) b Resend the print job.

Do repeating defects still appear on prints?

Show 9 more labels / short text on this page
Troubleshooting 336 · Action Yes No · Step 1 · Step 2 · ) ) ) · ) ) ) · Action Yes No · Step 1 · Step 2
Page 337 of the Lexmark MS810 user manual — Skewed print
Page 337 · click to enlarge
Page 337

Shadow images appear on prints

Lexmark MS810 — Shadow images appear on prints diagram (page 337)
Fig. 231 · Shadow images appear on prints

ABCD

Go to step 2. Load paper with the correct paper type and weight in the tray.

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do shadow images still appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Skewed print

) ) ABCDE

ABCDE ABCDE

Show 8 more labels / short text on this page
Troubleshooting 337 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 338 of the Lexmark MS810 user manual — Streaked horizontal lines appear on prints
Page 338 · click to enlarge
Page 338

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the tray. b Resend the print job.

Is the print still skewed?

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder from

Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked horizontal lines appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 338 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 339 of the Lexmark MS810 user manual — Streaked vertical lines appear on prints
Page 339 · click to enlarge
Page 339
Lexmark MS810 — Streaked vertical lines appear on prints diagram (page 339)
Fig. 232 · Streaked vertical lines appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Streaked vertical lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do streaked vertical lines appear on prints?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper texture, type, and weight in the Paper menu to match the paper loaded in the tray.

  • Specify the paper texture, type, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper texture, type, and weight specified in the tray settings.

Do the paper texture, type, and weight match the paper in the tray?

Show 6 more labels / short text on this page
Troubleshooting 339 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2
Page 340 of the Lexmark MS810 user manual — Toner fog or background shading appears on prints
Page 340 · click to enlarge
Page 340

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked vertical lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked vertical lines appear on prints?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do streaked vertical lines appear on prints?

Toner fog or background shading appears on prints

ABCDE

ABCDE ABCDE

The problem is solved. Go to step 2.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Did the toner fog or background shading disappear from the prints?

Show 7 more labels / short text on this page
Troubleshooting 340 · Action Yes No · Step 3 · Step 4 · Step 5 · Action Yes No · Step 1
Page 341 of the Lexmark MS810 user manual — Toner rubs off
Page 341 · click to enlarge
Page 341
Lexmark MS810 — Toner specks appear on prints diagram (page 341)
Fig. 233 · Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Did the toner fog or background shading disappear from the prints?

Toner specks appear on prints

Lexmark MS810 — Toner specks appear on prints diagram (page 341)
Fig. 234 · Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Toner rubs off

Lexmark MS810 — Toner rubs off diagram (page 341)
Fig. 235 · Toner rubs off

Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the Paper menu on the printer control panel, check the paper type and weight.

Do the paper type and weight match the paper loaded in the tray?

From the Paper menu on the printer control panel, set the paper texture.

Check if you are printing on paper with texture or rough finishes.

a From the Paper Weight menu on the printer control panel, set Heavy

Troubleshooting 341

Page 342 of the Lexmark MS810 user manual — Uneven print density
Page 342 · click to enlarge
Page 342

Contact customer support.

The problem is solved.

a Enable Quiet mode.

From the printer control panel, navigate to:

Settings > General Settings > Quiet Mode > On b Resend the print job.

Does the toner rub off?

Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

Contact customer support.

The problem is solved.

a Check if you are using a recommended type of transparency. b Resend the print job.

Is the print quality still poor?

Uneven print density

Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Is the print density uneven?

Show 7 more labels / short text on this page
Troubleshooting 342 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 343 of the Lexmark MS810 user manual — Vertical voids appear on prints
Page 343 · click to enlarge
Page 343

Vertical voids appear on prints

Go to step 2. The problem is solved.

a Make sure your software program is using a correct fill pattern. b Resend the print job.

Do vertical voids appear on prints?

Go to step 3. The problem is solved.

a From the printer control panel, set the paper type and weight in the

Paper menu to match the paper loaded in the tray. b Resend the print job.

Do vertical voids appear on prints?

Step 3 Check if you are using a recommended type of paper.

Go to step 4. The problem is solved.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Do vertical voids appear on prints?

Go to step 5. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do vertical voids appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 343 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 4 · Step 5
Page 344 of the Lexmark MS810 user manual — Embedded Web Server does not open
Page 344 · click to enlarge
Page 344

Solving home screen applications problems

This troubleshooting step applies only to touch-screen printer models.

An application error has occurred

Go to step 2. Contact customer support.

Check the system log for relevant details.

a Open a Web browser, and then type the printer IP address in the

address field.

If you do not know the IP address of the printer, then you can:

  • View the IP address on the printer home screen.
  • Print a network setup page or the menu settings pages, and then locate the IP address in the TCP/IP section.

c From the Filter menu, select an application status. d From the Application menu, select an application, and then click

Submit.

Does an error message appear in the log?

Step 2 Resolve the error.

The problem is solved. Contact customer support.

Is the application working now?

Embedded Web Server does not open

Go to step 2. Type the correct printer IP address in the address field of your Web browser.

Make sure the printer IP address is correct.

View the printer IP address:

  • From the printer home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Is the printer IP address correct?

Go to step 3. Turn on the printer.

Check if the printer is turned on.

Is the printer turned on?

Show 6 more labels / short text on this page
Troubleshooting 344 · Action Yes No · Step 1 · Action Yes No · Step 1 · Step 2
Page 345 of the Lexmark MS810 user manual — Contacting customer support
Page 345 · click to enlarge
Page 345

Go to step 4. Contact your system support person.

Check if the network connection is working.

Is the network connection working?

Go to step 5. Tighten the cable connection.

Make sure the cable connections to the printer and print server are secure.

For more information, see the setup documentation that came with the printer.

Are the cable connections to the printer and print server secure?

Go to step 6. Contact your system support person.

Temporarily disable the Web proxy servers.

Are the Web proxy servers disabled?

Step 6 Access the Embedded Web Server again by typing the correct IP address in the address field.

The problem is solved. Contact customer support.

Did the Embedded Web Server open?

Contacting customer support

When you contact customer support, you will need to be able to describe the problem you are experiencing, the message on the printer display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label at the back of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit http://support.lexmark.com.

Show 5 more labels / short text on this page
Troubleshooting 345 · Action Yes No · Step 3 · Step 4 · Step 5
Page 346 of the Lexmark MS810 user manual — GOVERNMENT END USERS
Page 346 · click to enlarge
Page 346

Notices

Product information

Product name:

Lexmark MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS810de, MS812de

Machine type:

Model(s):

210, 230, 23E, 410, 430, 630, 63E

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2012 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commerical Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

October 2012

Page 347 of the Lexmark MS810 user manual — Trademarks
Page 347 · click to enlarge
Page 347

Trademarks

Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

The following terms are trademarks or registered trademarks of these companies:

Lexmark MS810 — Trademarks diagram (page 347)
Fig. 236 · Trademarks

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Page 348 of the Lexmark MS810 user manual — Static sensitivity notice
Page 348 · click to enlarge
Page 348

All other trademarks are the property of their respective owners.

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Printing MS81057 dBA; MS811: 58 dBA; MS812: 58 dBA

Ready 32 dBA for all models

Values are subject to change. See www.lexmark.com for current values.

EU waste electronics information

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, click EU Waste Electronics Information.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Static sensitivity notice

Page 349 of the Lexmark MS810 user manual — Laser advisory label
Page 349 · click to enlarge
Page 349

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature 15.6 to 32.2°C (60 to 90°F)

Shipping and storage temperature -40 to 43.3°C (-40 to 110°F)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 10 milliwatt gallium arsenide laser operating in the wavelength of 787-800 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 350 of the Lexmark MS810 user manual — 0.1 W
Page 350 · click to enlarge
Page 350

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs.

MS810700 W; MS811: 770 W; MS812: 830 W

Copy The product is generating hard‑copy output from hard‑copy original documents.

N/A

Scan The product is scanning hard‑copy documents. N/A

Ready The product is waiting for a print job. MS810n, MS810dn, MS811n, MS811dn, MS812dn: 55 W; MS810de, MS812de: 60 W (Ready 1); all printer models: 30 W (Ready 2)

Sleep Mode The product is in a high‑level energy‑saving mode. MS810n, MS810dn, MS811n, MS811dn, MS812dn: 4.1 W; MS810de: 5.5 W; MS812de: 7 W

Hibernate The product is in a low‑level energy‑saving mode. 0.5 W

Off The product is plugged into an electrical outlet, but the power switch is turned off.

0.1 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Page 351 of the Lexmark MS810 user manual — Lexmark International, Inc., Lexington, KY
Page 351 · click to enlarge
Page 351

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 180 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and Switzerland

Factory default value for this product in EU countries or regions and Switzerland 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

Disabled

Page 352 of the Lexmark MS810 user manual — Limited warranty service
Page 352 · click to enlarge
Page 352

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Page 353 of the Lexmark MS810 user manual — Additional rights
Page 353 · click to enlarge
Page 353

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Page 354 of the Lexmark MS810 user manual — Federal Communications Commission (FCC) compliance information statement
Page 354 · click to enlarge
Page 354

Modular component notice

This product may contain the following modular component(s):

Lexmark Regulatory Type/LEX-M01-005; FCC ID: IYLLEXM01005; Industry Canada IC: 2376A-M01005

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Multiple model information

The following information applies to all MS810, MS811, and MS812 printer models except for the MS812de printer model.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

Page 355 of the Lexmark MS810 user manual — European Community (EC) directives conformity
Page 355 · click to enlarge
Page 355

if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Page 356 of the Lexmark MS810 user manual — Industry Canada (Canada)
Page 356 · click to enlarge
Page 356

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Page 357 of the Lexmark MS810 user manual — RO SE SI SK TR UK
Page 357 · click to enlarge
Page 357

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

Page 358 of the Lexmark MS810 user manual — Notice to users in the European Union
Page 358 · click to enlarge
Page 358

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Page 359 of the Lexmark MS810 user manual — Industry Canada compliance statement
Page 359 · click to enlarge
Page 359

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Model ‑ specific information

The following information applies only to the MS812de printer model.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout Disabled

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Page 360 of the Lexmark MS810 user manual — Industry Canada (Canada)
Page 360 · click to enlarge
Page 360

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Radio interference notice

This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

Page 361 of the Lexmark MS810 user manual — Notice to users in the European Union
Page 361 · click to enlarge
Page 361

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Page 362 of the Lexmark MS810 user manual — Notice to users in the European Union
Page 362 · click to enlarge
Page 362

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

Lexmark MS810 — Notice to users in the European Union diagram (page 362)
Fig. 237 · Notice to users in the European Union

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Page 363 of the Lexmark MS810 user manual — Notice to users in the European Union
Page 363 · click to enlarge
Page 363

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Page 365 of the Lexmark MS810 user manual — Table of contents
Page 365 · click to enlarge
Page 365

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 366 of the Lexmark MS810 user manual — Table of contents
Page 366 · click to enlarge
Page 366

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 367 of the Lexmark MS810 user manual — Table of contents
Page 367 · click to enlarge
Page 367

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 368 of the Lexmark MS810 user manual — Table of contents
Page 368 · click to enlarge
Page 368

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 369 of the Lexmark MS810 user manual — Index
Page 369 · click to enlarge
Page 369

indicator light 49, 90, 139 parts 48, 90, 139 Sleep button light 49, 90, 139 using 48, 90, 139 printer control panel, virtual display

Cartridge nearly low [88.xy] 292 Cartridge very low, [x] estimated

Insufficient memory to collate job

[37] 298 Insufficient memory to support

pages remain [88.xy] 292 Cartridge, imaging unit mismatch

Resource Save feature [35] 298 Insufficient memory, some Held

[41.xy] 292 Change [paper source] to [custom

Jobs were deleted [37] 297 Insufficient memory, some held

using the Embedded Web

string] load [orientation] 292 Change [paper source] to [custom

Server 76, 126 printer hard disk

jobs will not be restored [37] 298 Load [paper source] with [custom

type name] load [orientation] 293 Change [paper source] to [paper

disposing of 84, 133, 182 encrypting 86, 135, 184 installing 23 removing 27 wiping 86, 134, 184 printer hard disk encryption 86, 135, 184 printer hard disk memory

string] [paper orientation] 298 Load [paper source] with [custom

size] load [orientation] 293 Change [paper source] to [paper

type name] [paper orientation] 299 Load [paper source] with [paper

type] [paper size] load [orientation] 293 Check tray [x] connection 293 Close door or insert cartridge 294 Close front door 294 Complex page, some data may not

size] [paper orientation] 299 Load [paper source] with [paper

erasing 86, 134, 184 printer information

type] [paper size] [paper orientation] 299 Load manual feeder with [custom

where to find 8 printer IP address

have printed [39] 294 Configuration change, some held

string] [paper orientation] 299 Load manual feeder with [custom

finding 95, 144 printer is printing blank pages 334 printer messages

jobs were not restored [57] 294 Defective flash detected [51] 294 Disk must be formatted for use in

type name] [paper orientation] 300 Load manual feeder with [paper

[x]‑page jam, clear manual feeder.

this device 295 Disk near full. Securely clearing

[250] 282 [x]‑page jam, lift front cover to

size] [paper orientation] 300 Load manual feeder with [paper

disk space. 295 Empty the hole punch box 295 Error reading USB drive. Remove

remove cartridge. [200– 201] 274 [x]‑page jam, open tray [x].

type] [paper size] [paper orientation] 300 Load staples 298 Maintenance kit low [80.xy] 300 Maintenance kit nearly low

USB. 295 Error reading USB hub. Remove

[24x] 281 [x]‑page jam, open upper and

hub. 295 Imaging unit low [84.xy] 295 Imaging unit nearly low

lower rear door. [231–234] 277 [x]‑page jam, open upper rear

[80.xy] 300 Maintenance kit very low, [x]

door. [202] 276 [x]‑page jam, remove paper, open

[84.xy] 295 Imaging unit very low, [x]

estimated pages remain [80.xy] 301 Memory full [38] 301 Network [x] software error

expander rear door. Leave paper in bin. [41y.xx] 288 [x]‑page jam, remove paper, open

estimated pages remain [84.xy] 295 Incompatible output bin [x]

[54] 301 Non‑Lexmark [supply type], see

finisher rear door. Leave paper in bin. [451] 287 [x]‑page jam, remove paper, open

[59] 296 Incompatible tray [x] [59] 296 Incorrect paper size, open [paper

User’s Guide [33.xy] 301 Not enough free space in flash

mailbox rear door. Leave paper in bin. [43y.xx] 290 [x]‑page jam, remove paper, open

source] [34] 296 Insert hole punch box 296 Insert staple cartridge 296 Insert Tray [x] 297 Install bin [x] 297 Install Tray [x] 297 Insufficient memory for Flash

memory for resources [52] 302 Paper changes needed 302 Parallel port [x] disabled [56] 302 PPDS font error [50] 302 Reattach bin [x] 302 Reattach bins [x] – [y] 303 Reinstall missing or unresponsive

stapler door. Leave paper in bin. [455–457] 283 [x]‑page jam, remove standard bin

jam. [203] 280 [x]‑page jam, remove tray 1 to

Memory Defragment operation [37] 297

cartridge [31.xy] 303 Reinstall missing or unresponsive

clear duplex. [235–239] 280 Cartridge low [88.xy] 292

imaging unit [31.xy] 304

Index 369

Page 370 of the Lexmark MS810 user manual — Table of contents
Page 370 · click to enlarge
Page 370

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 371 of the Lexmark MS810 user manual — Table of contents
Page 371 · click to enlarge
Page 371

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Page 372 of the Lexmark MS810 user manual — Table of contents
Page 372 · click to enlarge
Page 372

Table of contents

Contentsp.2Safety informationp.6Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.15Installing an Internal Solutions Portp.17Installing an optional cardp.21Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.29Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Updating available options in the printer driverp.36Networkingp.37Preparing to set up the printer on an Ethernet networkp.37Installing the printer on an Ethernet networkp.37Preparing to set up the printer on a wireless networkp.39Connecting the printer to a network using the Wireless Setup Wizardp.40Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.41Connecting the printer to a wireless network using the Embedded Web Serverp.41Changing port settings after installing a new network Internal Solutions Portp.42Setting up serial printingp.44Verifying printer setupp.45Using MS810n, MS810dn, MS811n, MS811dn, MS812dnp.46Learning about the printerp.46Printer configurationsp.46Using the printer control panelp.48Understanding the colors of the Sleep button and indicator lightsp.49Loading paper and specialty mediap.49Setting the paper size and typep.49Configuring Universal paper settingsp.49Loading the 250or 550-sheet trayp.50Loading the 2100-sheet trayp.57Loading the multipurpose feederp.64Linking and unlinking traysp.69Linking and unlinking traysp.69Creating a custom name for a paper typep.69Assigning a custom paper typep.70Printingp.70Printing a documentp.70Printing a documentp.70Adjusting toner darknessp.71Printing from a flash drivep.71Supported flash drives and file typesp.71Printing from a flash drivep.72Printing confidential and other held jobsp.73Storing print jobs in the printerp.73Printing confidential and other held jobsp.74Printing information pagesp.75Printing a font sample listp.75Printing a directory listp.75Canceling a print jobp.75Canceling a print job from the printer control panelp.75Canceling a print job from the computerp.76Managing your printerp.76Finding advanced networking and administrator informationp.76Checking the virtual displayp.76Configuring supply notifications from the Embedded Web Serverp.77Modifying confidential print settingsp.77Copying printer settings to other printersp.78Printing a menu settings pagep.78Printing a network setup pagep.79Checking the status of parts and suppliesp.79Checking the status of parts and supplies on the printer control panelp.79Checking the status of parts and supplies from the Embedded Web Serverp.79Saving energyp.79Using Eco-Modep.79Reducing printer noisep.80Adjusting Sleep modep.81Using Hibernate modep.82Adjusting the brightness of the printer displayp.82Restoring factory default settingsp.83Securing the printerp.84Using the security lock featurep.84Statement of Volatilityp.84Erasing volatile memoryp.85Erasing non-volatile memoryp.85Erasing printer hard disk memoryp.86Configuring printer hard disk encryptionp.86Finding printer security informationp.87Using MS810dep.88Learning about the printerp.88Printer configurationsp.88Using the printer control panelp.90Understanding the colors of the Sleep button and indicator lightsp.90Understanding the home screenp.91Using the touch-screen buttonsp.92Setting up and using the home screen applicationsp.94Finding the IP address of the computerp.94Finding the IP address of the printerp.95Accessing the Embedded Web Serverp.95Customizing the home screenp.95Activating the home screen applicationsp.96Finding information about the home screen applicationsp.96Using Background and Idle Screenp.96Setting up Forms and Favoritesp.96Understanding Eco-Settingsp.97Setting up Remote Operator Panelp.97Exporting and importing a configurationp.98Loading paper and specialty mediap.98Setting the paper size and typep.98Configuring Universal paper settingsp.99Loading the 250or 550-sheet trayp.99Loading the 2100-sheet trayp.106Loading the multipurpose feederp.113Linking and unlinking traysp.118Linking and unlinking traysp.118Creating a custom name for a paper typep.118Assigning a custom paper typep.119Printingp.119Printing a documentp.119Printing formsp.119Printing a documentp.120Adjusting toner darknessp.120Printing from a flash drivep.121Supported flash drives and file typesp.121Printing from a flash drivep.122Printing confidential and other held jobsp.123Storing print jobs in the printerp.123Printing confidential and other held jobsp.124Printing information pagesp.124Printing a font sample listp.124Printing a directory listp.125Canceling a print jobp.125Canceling a print job from the printer control panelp.125Canceling a print job from the computerp.125Managing your printerp.126Finding advanced networking and administrator informationp.126Checking the virtual displayp.126Configuring supply notifications from the Embedded Web Serverp.126Modifying confidential print settingsp.127Copying printer settings to other printersp.127Printing a menu settings pagep.128Printing a network setup pagep.128Checking the status of parts and suppliesp.128Checking the status of parts and supplies on the printer control panelp.128Checking the status of parts and supplies from the Embedded Web Serverp.128Saving energyp.129Using Eco-Modep.129Reducing printer noisep.129Adjusting Sleep modep.130Using Hibernate Modep.131Adjusting the brightness of the displayp.131Restoring factory default settingsp.132Securing the printerp.132Using the security lock featurep.132Statement of Volatilityp.133Erasing volatile memoryp.133Erasing non-volatile memoryp.134Erasing printer hard disk memoryp.134Configuring printer hard disk encryptionp.135Finding printer security informationp.136Using MS812dep.137Learning about the printerp.137Printer configurationsp.137Using the printer control panelp.139Understanding the colors of the Sleep button and indicator lightsp.139Understanding the home screenp.140Using the touch-screen buttonsp.141Setting up and using the home screen applicationsp.144Finding the IP address of the computerp.144Finding the IP address of the printerp.144Accessing the Embedded Web Serverp.145Customizing the home screenp.145Activating the home screen applicationsp.145Finding information about the home screen applicationsp.145Using Background and Idle Screenp.146Setting up Forms and Favoritesp.146Understanding Eco-Settingsp.147Setting up Remote Operator Panelp.147Exporting and importing a configurationp.148Loading paper and specialty mediap.148Setting the paper size and typep.148Configuring Universal paper settingsp.149Loading the 250or 550-sheet trayp.149Loading the 2100-sheet trayp.156Loading the multipurpose feederp.163Linking and unlinking traysp.168Linking and unlinking traysp.168Creating a custom name for a paper typep.168Assigning a custom paper typep.169Printingp.169Printing a documentp.169Printing formsp.169Printing a documentp.170Adjusting toner darknessp.170Printing from a flash drivep.171Supported flash drives and file typesp.171Printing from a flash drivep.172Printing confidential and other held jobsp.173Storing print jobs in the printerp.173Printing confidential and other held jobsp.173Printing information pagesp.174Printing a font sample listp.174Printing a directory listp.174Canceling a print jobp.175Canceling a print job from the printer control panelp.175Canceling a print job from the computerp.175Managing your printerp.175Finding advanced networking and administrator informationp.175Checking the virtual displayp.175Configuring supply notifications from the Embedded Web Serverp.176Modifying confidential print settingsp.177Copying printer settings to other printersp.177Printing a menu settings pagep.177Printing a network setup pagep.178Checking the status of parts and suppliesp.178Checking the status of parts and supplies on the printer control panelp.178Checking the status of parts and supplies from the Embedded Web Serverp.178Saving energyp.178Using Eco-Modep.178Reducing printer noisep.179Adjusting Sleep modep.180Using Hibernate modep.181Adjusting the brightness of the printer displayp.181Restoring factory default settingsp.182Securing the memory before moving the printerp.182Using the security lock featurep.182Statement of Volatilityp.182Erasing volatile memoryp.183Erasing non-volatile memoryp.183Erasing printer hard disk memoryp.184Configuring printer hard disk encryptionp.184Finding printer security informationp.185Paper and specialty media guidep.187Using specialty mediap.187Tips on using card stockp.187Tips on using envelopesp.187Tips on using labelsp.188Tips on using transparenciesp.188Paper guidelinesp.188Paper characteristicsp.188Selecting paperp.189Selecting preprinted forms and letterheadp.190Using recycled paper and other office papersp.190Storing paperp.191Supported paper sizes, types, and weightsp.192Paper types and weights supported by the printerp.192Paper sizes supported by the printerp.192Paper sizes, types, and weights supported by the finishersp.194Understanding the printer menusp.197Menus listp.197Paper menup.198Default Source menup.198Paper Size/Type menup.198Configure MP menup.201Substitute Size menup.201Paper Texture menup.202Paper Weight menup.203Paper Loading menup.205Custom Types menup.206Custom Names menup.206Custom Bin Names menup.207Universal Setup menup.207Bin Setup menup.208Reports menup.209Reports menup.209Network/Ports menup.210Active NIC menup.210Standard Network or Network [x] menup.210Reports menup.212Network Card menup.212TCP/IP menup.213IPv6 menup.214Wireless menup.214AppleTalk menup.215Standard USB menup.216Parallel [x] menup.217Serial [x] menup.219SMTP Setup menup.222Security menup.223Edit Security Setups menup.223Miscellaneous Security Settings menup.224Confidential Print menup.224Disk Wiping menup.225Security Audit Log menup.226Set Date and Time menup.226Settings menup.228General Settingsp.228General Settings menup.228Flash Drive Menup.238Print Settings menup.238Print Settingsp.240Setup menup.240Finishing menup.242Quality menup.244Job Accounting menup.245Utilities menup.246XPS menup.247PDF menup.247PostScript menup.248PCL Emul menup.248HTML menup.251Image menup.252Help menup.252Saving money and the environmentp.254Saving paper and tonerp.254Using recycled paperp.254Conserving suppliesp.254Recyclingp.255Recycling Lexmark productsp.255Recycling Lexmark packagingp.255Returning Lexmark cartridges for reuse or recyclingp.255Maintaining the printerp.257Ordering suppliesp.257Using genuine Lexmark parts and suppliesp.257Estimated number of remaining pagesp.257Ordering toner cartridgesp.257Ordering an imaging unitp.258Ordering staple cartridgesp.259Ordering a roller kitp.259Ordering a maintenance kitp.259Storing suppliesp.260Replacing suppliesp.260Replacing the toner cartridgep.260Replacing the imaging unitp.262Replacing a staple cartridgep.265Cleaning the printer partsp.266Cleaning the printerp.266Emptying the hole punch boxp.267Moving the printerp.267Before moving the printerp.267Moving the printer to another locationp.269Shipping the printerp.269Clearing jamsp.270Avoiding jamsp.270Understanding jam messages and locationsp.272[x]-page jam, lift front cover to remove cartridge. [200–201]p.274[x]-page jam, open upper rear door. [202]p.276[x]-page jam, open upper and lower rear door. [231–234]p.277[x]-page jam, remove standard bin jam. [203]p.280[x]-page jam, remove tray 1 to clear duplex. [235–239]p.280[x]-page jam, open tray [x]. [24x]p.281[x]-page jam, clear manual feeder. [250]p.282[x]-page jam, remove paper, open stapler door. Leave paper in bin. [455–457]p.283[x]-page jam, remove paper, open finisher rear door. Leave paper in bin. [451]p.287[x]-page jam, remove paper, open expander rear door. Leave paper in bin. [41y.xx]p.288[x]-page jam, remove paper, open mailbox rear door. Leave paper in bin. [43y.xx]p.290Troubleshootingp.292Understanding the printer messagesp.292Cartridge, imaging unit mismatch [41.xy]p.292Cartridge low [88.xy]p.292Cartridge nearly low [88.xy]p.292Cartridge very low, [x] estimated pages remain [88.xy]p.292Change [paper source] to [custom string] load [orientation]p.292Change [paper source] to [custom type name] load [orientation]p.293Change [paper source] to [paper size] load [orientation]p.293Change [paper source] to [paper type] [paper size] load [orientation]p.293Check tray [x] connectionp.293Close door or insert cartridgep.294Close front doorp.294Complex page, some data may not have printed [39]p.294Configuration change, some held jobs were not restored [57]p.294Defective flash detected [51]p.294Disk must be formatted for use in this devicep.295Disk near full. Securely clearing disk space.p.295Empty the hole punch boxp.295Error reading USB drive. Remove USB.p.295Error reading USB hub. Remove hub.p.295Imaging unit low [84.xy]p.295Imaging unit nearly low [84.xy]p.295Imaging unit very low, [x] estimated pages remain [84.xy]p.295Incompatible output bin [x] [59]p.296Incompatible tray [x] [59]p.296Incorrect paper size, open [paper source] [34]p.296Insert hole punch boxp.296Insert staple cartridgep.296Insert Tray [x]p.297Install bin [x]p.297Install Tray [x]p.297Insufficient memory for Flash Memory Defragment operation [37]p.297Insufficient memory, some Held Jobs were deleted [37]p.297Insufficient memory, some held jobs will not be restored [37]p.298Insufficient memory to collate job [37]p.298Insufficient memory to support Resource Save feature [35]p.298Load staplesp.298Load [paper source] with [custom string] [paper orientation]p.298Load [paper source] with [custom type name] [paper orientation]p.299Load [paper source] with [paper size] [paper orientation]p.299Load [paper source] with [paper type] [paper size] [paper orientation]p.299Load manual feeder with [custom string] [paper orientation]p.299Load manual feeder with [custom type name] [paper orientation]p.300Load manual feeder with [paper size] [paper orientation]p.300Load manual feeder with [paper type] [paper size] [paper orientation]p.300Maintenance kit low [80.xy]p.300Maintenance kit nearly low [80.xy]p.300Maintenance kit very low, [x] estimated pages remain [80.xy]p.301Memory full [38]p.301Network [x] software error [54]p.301Non-Lexmark [supply type], see User’s Guide [33.xy]p.301Not enough free space in flash memory for resources [52]p.302PPDS font error [50]p.302Paper changes neededp.302Parallel port [x] disabled [56]p.302Reattach bin [x]p.302Reattach bins [x] – [y]p.303Reinstall missing or unresponsive cartridge [31.xy]p.303Reinstall missing or unresponsive fuser [31.xy]p.304Reinstall missing or unresponsive imaging unit [31.xy]p.304Remove defective disk [61]p.304Remove packaging material, [area name]p.304Remove paper from all binsp.304Remove paper from bin [x]p.304Remove paper from [linked set bin name]p.304Remove paper from standard output binp.305Replace cartridge, 0 estimated pages remain [88.xy]p.305Replace cartridge, printer region mismatch [42.xy]p.305Replace imaging unit, 0 estimated pages remain [84.xy]p.305Replace maintenance kit, 0 estimated pages remain [80.xy]p.306Replace roller kit [81.xx]p.306Replace unsupported cartridge [32.xy]p.306Replace unsupported fuser [32.xy]p.306Replace unsupported imaging unit [32.xy]p.306Restore held jobs?p.306Serial port [x] disabled [56]p.307Some held jobs were not restoredp.307Standard network software error [54]p.307Standard USB port disabled [56]p.307Supply needed to complete jobp.307Too many bins attached [58]p.307Too many disks installed [58]p.308Too many flash options installed [58]p.308Too many trays attached [58]p.308Tray [x] paper size unsupportedp.308Unformatted flash detected [53]p.308Unsupported diskp.309Unsupported option in slot [x] [55]p.309USB port [x] disabled [56]p.309Solving printer problemsp.309Printer does not respondp.310The printer is not respondingp.310Printer display is blankp.311Printing problemsp.312Confidential and other held jobs do not printp.312Envelope seals when printingp.312Error message about reading the flash drive appearsp.313Incorrect characters printp.314Job prints from the wrong tray or on the wrong paperp.314Large jobs do not collatep.315Multiple-language PDF files do not printp.315Print job takes longer than expectedp.316Print jobs do not printp.316Printing slows downp.317Tray linking does not workp.318Unexpected page breaks occurp.319Hardware and internal option problemsp.3192100-sheet tray problemsp.319Cannot detect internal optionp.320Internal print server does not operate correctlyp.321Internal Solutions Port does not operate correctlyp.321Tray problemsp.322USB/parallel interface card does not operate correctlyp.323Paper feed problemsp.323Jammed pages are not reprintedp.323Paper frequently jamsp.324Paper jam message remains after jam is clearedp.324Print quality problemsp.325Characters have jagged or uneven edgesp.325Clipped pages or imagesp.325Compressed images appear on printsp.326Gray background on printsp.327Horizontal voids appear on printsp.328Incorrect margins on printsp.329Paper curlp.330Print irregularitiesp.330Print is too darkp.332Print is too lightp.333Printer is printing blank pagesp.334Printer is printing solid black pagesp.335Repeating defects appear on printsp.336Shadow images appear on printsp.337Skewed printp.337Streaked horizontal lines appear on printsp.338Streaked vertical lines appear on printsp.339Toner fog or background shading appears on printsp.340Toner specks appear on printsp.341Toner rubs offp.341Transparency print quality is poorp.342Uneven print densityp.342Vertical voids appear on printsp.343Solving home screen applications problemsp.344An application error has occurredp.344Embedded Web Server does not openp.344Contacting customer supportp.345Noticesp.346Product informationp.346Edition noticep.346GOVERNMENT END USERSp.346Trademarksp.347Licensing noticesp.348Noise emission levelsp.348EU waste electronics informationp.348Product disposalp.348Static sensitivity noticep.348ENERGY STARp.349Temperature informationp.349Laser noticep.349Laser advisory labelp.349Power consumptionp.350Product power consumptionp.350Sleep Modep.351Hibernate Modep.351Off modep.351Total energy usagep.351STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.351Modular component noticep.354Patent acknowledgmentp.354Multiple model informationp.354Federal Communications Commission (FCC) compliance information statementp.354European Community (EC) directives conformityp.355Regulatory notices for wireless productsp.356Exposure to radio frequency radiationp.356Industry Canada (Canada)p.356Notice to users in the European Unionp.357Model-specific informationp.359Hibernate Modep.359Federal Communications Commission (FCC) compliance information statementp.359European Community (EC) directives conformityp.360Radio interference noticep.360Regulatory notices for wireless productsp.360Exposure to radio frequency radiationp.360Industry Canada (Canada)p.360Notice to users in the European Unionp.361Indexp.364
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark MS810

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark MS810

Be the first to ask — other owners or our team will answer.

Original document

Lexmark MS810 manual PDF

372 pages·18.5 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…