EN
Lexmark logo
Official user manual

Lexmark MS410

172 pages·5.5 MB·Printer·PDF·ENDEFRITNLJA
Lexmark MS410
Table of Contents 289 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 1 of the Lexmark MS410 user manual — September 2012 www.lexmark.com
Page 1 · click to enlarge
Page 1

MS410 Series

User's Guide

September 2012 www.lexmark.com

Machine type(s):

Model(s):

420, 430

Page 2 of the Lexmark MS410 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 5 of the Lexmark MS410 user manual — Safety information
Page 5 · click to enlarge
Page 5

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

Safety information 5

Page 6 of the Lexmark MS410 user manual — Safety information
Page 6 · click to enlarge
Page 6

SAVE THESE INSTRUCTIONS.

Safety information 6

Page 7 of the Lexmark MS410 user manual — Learning about the printer
Page 7 · click to enlarge
Page 7

Learning about the printer 7

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides are available on the Software and Documentation CD. For updates, visit our Web site at http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then look for Printer and Software Documentation under the Pubs folder. From the list of publications, click the Networking Guide link. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 8 of the Lexmark MS410 user manual — Selecting a location for the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark Support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the US—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations.
Ambient temperature16 to 32°C (60 to 90°F) Storage temperature‑20 to 40°C (‑4 to 104°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 9 of the Lexmark MS410 user manual — Printer configurations
Page 9 · click to enlarge
Page 9

Learning about the printer 9

Lexmark MS410 — Printer configurations diagram (page 9)
Fig. 1 · Printer configurations
1Right side305 mm (12 in.) 2Front510 mm (20 in.) 3Left side205 mm (8 in.) 4Rear205 mm (8 in.) 5Top305 mm (12 in.)

Printer configurations

You can configure your printer by adding one optional 250‑ or 550‑sheet tray. For instructions on installing the optional tray, see “Installing optional trays” on page 19.

Page 10 of the Lexmark MS410 user manual — Printer configurations
Page 10 · click to enlarge
Page 10

Learning about the printer 10

Lexmark MS410 — Printer configurations diagram (page 10)
Fig. 2 · Printer configurations
Lexmark MS410 — Printer configurations diagram (page 10)
Fig. 3 · Printer configurations
1Printer control panel 2Paper stop 3Standard bin 4Front door release button 5Controller board access door 6Standard 250‑sheet tray 7Optional 250‑ or 550‑sheet tray 850‑sheet multipurpose feeder 9Front door
Page 11 of the Lexmark MS410 user manual — Using the printer control panel
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Using the printer control panel

Lexmark MS410 — Using the printer control panel diagram (page 11)
Fig. 4 · Using the printer control panel

4 5 6 7 8

Use theTo 1Menus buttonOpen the menus. Notes: • The menus are available only when the printer is in the Ready state. • Pressing the button while navigating within the menus returns the printer control panel to the top‑level menu screen. 2DisplayView printing options as well as status and error messages. 3Sleep buttonEnable Sleep mode or Hibernate mode. Notes: • Pressing any hard button will cause the printer to wake from Sleep mode. • Pressing the Sleep button or the power switch will cause the printer to wake from Hibernate mode. 4Stop button• Exit the menus and return to the Ready state. • Stop printer activities, such as printing or downloading fonts. 5Right arrow button• Scroll through menus or to move between screens and menu options. • Scroll through settings or text. For menus with numeric values, press and hold an arrow button to scroll through the settings. Release the button when the value you want appears. 6Select button• Open a menu. • Display available values or settings for a menu. The current default setting is indicated by an asterisk (*). • Save the displayed value as the new user default setting. 7Left arrow button• Scroll through menus or to move between screens and menu options. • Scroll through settings or text. For menus with numeric values, press and hold an arrow button to scroll through the settings. Release the button when the value you want appears. 8Back buttonReturn to the previous screen.
Page 12 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Use theTo 9Indicator lightDetermine the status of the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light color and its corresponding printer status

Indicator lightPrinter status OffThe printer is off or in Hibernate mode. Blinking greenThe printer is warming up, processing data, or printing. Solid greenThe printer is on, but idle. Blinking redThe printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button lightPrinter status OffThe printer is off, idle or in Ready state. Solid amberThe printer is in Sleep mode. Blinking amberThe printer is entering or waking from Hibernate mode. Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing patternThe printer is in Hibernate mode.

Using the Embedded Web Server

If the printer is installed on a network, then you can use the Embedded Web Server to do the following:

  • View the virtual display of the printer control panel.
  • Check the status of the printer supplies.
  • Configure supply notifications.
  • Configure printer settings.
  • Configure network settings.
  • View reports.

To access the Embedded Web Server for your printer:

  • 1 Obtain the printer IP address:
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section
Page 13 of the Lexmark MS410 user manual — Using the Local Printer Settings Utility
Page 13 · click to enlarge
Page 13

Learning about the printer 13

– An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. – If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

The Embedded Web Server page appears.

Using the Local Printer Settings Utility

The Local Printer Settings Utility lets you change and save settings for a printer that is connected to a computer locally through a USB or parallel cable.

To download and install the Local Printer Settings Utility, see “Installing the Local Printer Settings Utility” on page 22.

To access the Local Printer Settings Utility:

or Start.

2 Click Programs > Lexmark > Local Printer Settings Utility.

To save your settings, click Actions > Apply Settings.

You can also distribute your settings to other printers by saving the settings in a command file. To save your settings in a command file, click Actions > Save As Command File.

1 Click

Page 14 of the Lexmark MS410 user manual — Accessing the controller board
Page 14 · click to enlarge
Page 14

Additional printer setup 14

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

Memory cards

  • Printer memory
  • Flash memory
  • Fonts

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Open the controller board access door.

Lexmark MS410 — Accessing the controller board diagram (page 14)
Fig. 5 · Accessing the controller board

2 Use the following illustration to locate the appropriate connector.

Page 15 of the Lexmark MS410 user manual — Installing a memory card
Page 15 · click to enlarge
Page 15

Additional printer setup 15

Lexmark MS410 — Installing a memory card diagram (page 15)
Fig. 6 · Installing a memory card

1 Memory card connector

2 Option card connector

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

An optional memory card can be purchased separately and attached to the controller board.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 14.

2 Unpack the memory card.

Page 16 of the Lexmark MS410 user manual — Installing a memory card
Page 16 · click to enlarge
Page 16

Additional printer setup 16

3 Align the notch (1) on the memory card with the ridge (2) on the connector.

Lexmark MS410 — Installing a memory card diagram (page 16)
Fig. 7 · Installing a memory card

4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

Lexmark MS410 — Installing a memory card diagram (page 16)
Fig. 8 · Installing a memory card
Lexmark MS410 — Installing a memory card diagram (page 16)
Fig. 9 · Installing a memory card

5 Close the controller board access door.

Page 17 of the Lexmark MS410 user manual — Installing an optional card
Page 17 · click to enlarge
Page 17

Additional printer setup 17

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 14.

2 Unpack the optional card.

3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Lexmark MS410 — Installing an optional card diagram (page 17)
Fig. 10 · Installing an optional card
Lexmark MS410 — Installing an optional card diagram (page 17)
Fig. 11 · Installing an optional card
Page 18 of the Lexmark MS410 user manual — Installing an optional card
Page 18 · click to enlarge
Page 18

Additional printer setup 18

4 Push the card firmly into place as shown in the illustration.

Lexmark MS410 — Installing an optional card diagram (page 18)
Fig. 12 · Installing an optional card

5 Close the controller board access door.

Page 19 of the Lexmark MS410 user manual — Installing optional trays
Page 19 · click to enlarge
Page 19

Additional printer setup 19

Installing hardware options

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Lexmark MS410 — Installing optional trays diagram (page 19)
Fig. 13 · Installing optional trays
Lexmark MS410 — Installing optional trays diagram (page 19)
Fig. 14 · Installing optional trays

2 Unpack the tray, and then remove any packing material.

3 Remove the tray from the base.

Lexmark MS410 — Installing optional trays diagram (page 19)
Fig. 15 · Installing optional trays

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

Page 20 of the Lexmark MS410 user manual — Attaching cables
Page 20 · click to enlarge
Page 20

Additional printer setup 20

7 Align the printer with the tray, and then slowly lower the printer into place.

Lexmark MS410 — Attaching cables diagram (page 20)
Fig. 16 · Attaching cables

8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Attaching cables

Connect the printer to the computer using a USB or parallel cable, or to the network using an Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate parallel cable with the parallel port
Page 21 of the Lexmark MS410 user manual — Installing the printer software
Page 21 · click to enlarge
Page 21

Additional printer setup 21

  • The appropriate Ethernet cable with the Ethernet port
Lexmark MS410 — Setting up the printer software diagram (page 21)
Fig. 17 · Setting up the printer software

1 USB port* Attach an optional wireless network adapter.

2 USB printer port Connect the printer to a computer.

3 Ethernet port* Connect the printer to a network.

4 Parallel port* Connect the printer to a computer.

5 Power switch Turn on or turn off the printer.

6 Printer power cord socket Connect the printer to an electrical outlet.

7 Security slot Attach a lock that will secure the printer in place.

* These ports are available only in select printer models.

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.

Use the To

Page 22 of the Lexmark MS410 user manual — Updating available options in the printer driver
Page 22 · click to enlarge
Page 22

Additional printer setup 22

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop.

3 Click Install, and then follow the instructions on the computer screen.

Installing the Local Printer Settings Utility

1 Visit http://support.lexmark.com, and then download the software.

2 Double‑click the software installer package.

3 Select an installation type, and then click Install.

4 Click Install to start the installation.

5 Click Agree to accept the license agreement.

6 Click Continue, and then follow the instructions on the computer screen.

  • Use the Local Printer Settings Utility to change the toner darkness, power saver, and paper size settings for all print jobs. Use the printer software to change these settings for individual print jobs.
  • This utility is supported only in select printer models.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

a Click

Page 23 of the Lexmark MS410 user manual — For Macintosh users
Page 23 · click to enlarge
Page 23

Additional printer setup 23

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

In Windows 8 · a Click

Page 24 of the Lexmark MS410 user manual — For Windows users
Page 24 · click to enlarge
Page 24

Additional printer setup 24

Networking

  • Purchase a MarkNet TM N8352 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to:

Apps list > Run > type: D:\setup.exe > OK

In Windows 8

Page 25 of the Lexmark MS410 user manual — For Macintosh users
Page 25 · click to enlarge
Page 25

Additional printer setup 25

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when installation is complete.

4 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer.

a Click

Page 26 of the Lexmark MS410 user manual — Preparing to set up the printer on a wireless network
Page 26 · click to enlarge
Page 26

Additional printer setup 26

– This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly.
  • Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. or – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.

Page 27 of the Lexmark MS410 user manual — Using the Wireless Setup Utility (Windows only)
Page 27 · click to enlarge
Page 27

Additional printer setup 27

– To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came

with the access point, see the Web page associated with the access point, or consult your system support person.

Connecting the printer to a wireless network using Wi‑Fi Protected Setup

Before connecting the printer to a wireless network, make sure that:

  • The access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter installed in your printer is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

Using the Push Button Configuration method

1 From the printer control panel, navigate to:

> Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > > Wi‑Fi Protected

Setup > > Start Push Button Method >

2 Follow the instructions on the printer display.

Using the Personal Identification Number (PIN) method

1 From the printer control panel, navigate to:

> Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > > Wi‑Fi Protected

Setup > > Start PIN Method >

2 Copy the eight‑digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the printer software

Using the Wireless Setup Utility (Windows only)

The Wireless Setup Utility lets you:

  • Configure the printer to join an existing wireless network.
  • Add a printer to an existing ad hoc network.
  • Change the wireless settings after installation.
  • Install the printer on additional network computers.
Page 28 of the Lexmark MS410 user manual — Using the Wireless Setup Assistant (Macintosh only)
Page 28 · click to enlarge
Page 28

Additional printer setup 28

Installing the Wireless Setup Utility

1 Go to the Lexmark Web site at http://support.lexmark.com.

2 Download the latest Wireless Setup Utility.

3 Double‑click the downloaded software installer package.

4 Follow the instructions on the computer screen.

Launching the Wireless Setup Utility

  • Make sure the printer is turned on.
  • Make sure a wireless network adapter installed in your printer is attached and working properly.

1 Run the utility.

From the Search charm, type Printer Home, and then navigate to:

Apps list > Printer Home > Settings > Wireless Setup Utility

In Windows 7 or earlier

or Start. b Click All Programs or Programs, and then select the printer program folder from the list.

c Select your printer, and then navigate to: Printer Home > Settings > Wireless Setup Utility

2 Follow the instructions on the computer screen.

Using the Wireless Setup Assistant (Macintosh only)

The Wireless Setup Assistant lets you:

  • Configure the printer to join an existing wireless network.
  • Add a printer to an existing ad hoc network.
  • Change the wireless settings after installation.
  • Install the printer on additional network computers.

Installing the Wireless Setup Assistant

1 Go to the Lexmark Web site at http://support.lexmark.com.

2 Download the latest Wireless Setup Assistant application.

3 Double‑click the downloaded software installer package.

4 Follow the instructions on the computer screen.

Launching the Wireless Setup Assistant

  • Make sure the printer is turned on.

In Windows 8 · a Click

Page 29 of the Lexmark MS410 user manual — Printing a menu settings page
Page 29 · click to enlarge
Page 29

Additional printer setup 29

  • Make sure a wireless network adapter installed in your printer is attached and working properly.

1 From the Finder, navigate to:

Applications > select your printer folder

2 Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.

?.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

  • Your printer is connected temporarily to an Ethernet network.
  • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with your wireless network adapter.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.

Verifying printer setup

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.

From the printer control panel, navigate to:

> Reports > > Menu Settings Page >

Page 30 of the Lexmark MS410 user manual — Printing a network setup page
Page 30 · click to enlarge
Page 30

Additional printer setup 30

Printing a network setup page

If the printer is connected to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the printer control panel, navigate to:

> Reports > > Network Setup Page >

2 Check the first section of the network setup page and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Page 31 of the Lexmark MS410 user manual — Specify the paper height and width
Page 31 · click to enlarge
Page 31

Loading paper and specialty media 31

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 105 and “Storing paper” on page 48.

Setting the paper size and type

1 From the printer control panel, navigate to:

> Paper Menu > > Paper Size/Type >

2 Select Tray [x] Size or Tray [x] Type, and then press .

3 Change the paper size or type setting, and then press .

  • The paper size setting for the standard 250 ‑ sheet tray (Tray 1), optional 250 ‑ or 550 ‑ sheet tray (Tray 2), and the multipurpose feeder must be set manually in the Paper Size menu.
  • The factory default paper type for Tray 1 is Plain Paper.
  • The factory default paper type for the multipurpose feeder is Custom Type 6.
  • The paper type setting must be manually set for all trays.

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The largest supported Universal size is 216 x 355.6 mm (8.5 x 14 inches).
  • The smallest Universal size supported in the multipurpose feeder is 76 x 127 mm (3 x 5 inches). The smallest Universal size supported in the optional tray is 183 x 210 mm (7.2 x 8.3 inches).

From the printer control panel, navigate to:

> Paper Menu > > Universal Setup > > Units of Measure > > select the unit of measure >

Specify the paper height and width

1 From the printer control panel, navigate to:

> Paper Menu > > Universal Setup > > Units of Measure > > select the unit of measure >

2 Press the arrow buttons until Portrait Height or Portrait Width appears, and then press .

Page 32 of the Lexmark MS410 user manual — Loading trays
Page 32 · click to enlarge
Page 32

Loading paper and specialty media 32

3 Change the settings, and then press .

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 20‑lb paper. It collects prints facedown. The standard bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.

To open the paper stop, pull it so that it flips forward.

Lexmark MS410 — Using the standard bin and paper stop diagram (page 32)
Fig. 18 · Using the standard bin and paper stop

Loading trays

1 Pull out the tray completely.

Page 33 of the Lexmark MS410 user manual — LGL
Page 33 · click to enlarge
Page 33

Loading paper and specialty media 33

Lexmark MS410 — Using the standard bin and paper stop diagram (page 33)
Fig. 19 · Using the standard bin and paper stop

LGL

EXEC

B5

2 Squeeze and then slide the width guide tab to the correct position for the size of the paper you are loading.

Lexmark MS410 — LGL diagram (page 33)
Fig. 20
Lexmark MS410 — LGL diagram (page 33)
Fig. 21

LGL

A6 A5

B5

EXEC

A5

Page 34 of the Lexmark MS410 user manual — A6 A5
Page 34 · click to enlarge
Page 34

Loading paper and specialty media 34

3 Squeeze and then slide the length guide tab to the correct position for the size of the paper you are loading.

Lexmark MS410 — Using the standard bin and paper stop diagram (page 34)
Fig. 22 · Using the standard bin and paper stop
Lexmark MS410 — Using the standard bin and paper stop diagram (page 34)
Fig. 23 · Using the standard bin and paper stop

A6 A5

LGL

B5

EXEC

A5

  • For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward to accommodate their length.
  • When loading legal ‑ size paper, the length guide extends beyond the base leaving the paper exposed to dust. To protect the paper from dust, you can purchase a dust cover separately. For more information, contact customer support.
  • If you are loading A6-size paper in the standard tray, then squeeze and then slide the length guide tab toward the center of the tray to the A6 ‑ size position.
  • Make sure the width and length guides are aligned with the paper size indicators on the bottom of the tray.
Page 35 of the Lexmark MS410 user manual — A4 A5 B5 A6
Page 35 · click to enlarge
Page 35

Loading paper and specialty media 35

Lexmark MS410 — Using the standard bin and paper stop diagram (page 35)
Fig. 24 · Using the standard bin and paper stop
Lexmark MS410 — Using the standard bin and paper stop diagram (page 35)
Fig. 25 · Using the standard bin and paper stop
Lexmark MS410 — Using the standard bin and paper stop diagram (page 35)
Fig. 26 · Using the standard bin and paper stop

A4 A5 B5 A6

LTR/LGL EXEC

A5

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS410 — A4 A5 B5 A6 diagram (page 35)
Fig. 27

5 Load the paper stack.

Lexmark MS410 — A4 A5 B5 A6 diagram (page 35)
Fig. 28
Lexmark MS410 — A4 A5 B5 A6 diagram (page 35)
Fig. 29
  • Load with the printable side facedown when using recycled or preprinted paper.
  • Load prepunched paper with the holes on the top edge toward the front of the tray.
Page 36 of the Lexmark MS410 user manual — Using the standard bin and paper stop
Page 36 · click to enlarge
Page 36

Loading paper and specialty media 36

  • Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two ‑ sided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray.
  • Make sure the paper is below the maximum paper fill indicator located on the side of the width guide.
Lexmark MS410 — Using the standard bin and paper stop diagram (page 36)
Fig. 30 · Using the standard bin and paper stop
Lexmark MS410 — Using the standard bin and paper stop diagram (page 36)
Fig. 31 · Using the standard bin and paper stop

6 Insert the tray.

Lexmark MS410 — Using the standard bin and paper stop diagram (page 36)
Fig. 32 · Using the standard bin and paper stop

7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 37 of the Lexmark MS410 user manual — Loading the multipurpose feeder
Page 37 · click to enlarge
Page 37

Loading paper and specialty media 37

Loading the multipurpose feeder

Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock, transparencies, paper labels, and envelopes. You can also use it for single‑page print jobs on letterhead.

1 Open the multipurpose feeder.

Lexmark MS410 — Loading the multipurpose feeder diagram (page 37)
Fig. 33 · Loading the multipurpose feeder
Lexmark MS410 — Loading the multipurpose feeder diagram (page 37)
Fig. 34 · Loading the multipurpose feeder

a Pull the multipurpose feeder extender.

Lexmark MS410 — Loading the multipurpose feeder diagram (page 37)
Fig. 35 · Loading the multipurpose feeder

b Pull the extender gently so that the multipurpose feeder is fully extended and open.

Lexmark MS410 — Loading the multipurpose feeder diagram (page 37)
Fig. 36 · Loading the multipurpose feeder
Page 38 of the Lexmark MS410 user manual — Loading the multipurpose feeder
Page 38 · click to enlarge
Page 38

Loading paper and specialty media 38

2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.

Lexmark MS410 — Loading the multipurpose feeder diagram (page 38)
Fig. 37 · Loading the multipurpose feeder
Lexmark MS410 — Loading the multipurpose feeder diagram (page 38)
Fig. 38 · Loading the multipurpose feeder

3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS410 — Loading the multipurpose feeder diagram (page 38)
Fig. 39 · Loading the multipurpose feeder
  • Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
  • Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

4 Load the paper or specialty media.

  • Do not force paper or specialty media into the multipurpose feeder.
Page 39 of the Lexmark MS410 user manual — Loading the multipurpose feeder
Page 39 · click to enlarge
Page 39

Loading paper and specialty media 39

  • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams.
Lexmark MS410 — Loading the multipurpose feeder diagram (page 39)
Fig. 40 · Loading the multipurpose feeder
  • Load paper, transparencies, and card stock with the recommended printable side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging that the transparencies came in.
Lexmark MS410 — Loading the multipurpose feeder diagram (page 39)
Fig. 41 · Loading the multipurpose feeder
Lexmark MS410 — Loading the multipurpose feeder diagram (page 39)
Fig. 42 · Loading the multipurpose feeder
Lexmark MS410 — Loading the multipurpose feeder diagram (page 39)
Fig. 43 · Loading the multipurpose feeder
Lexmark MS410 — Loading the multipurpose feeder diagram (page 39)
Fig. 44 · Loading the multipurpose feeder
Page 40 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 40 · click to enlarge
Page 40

Loading paper and specialty media 40

  • Load letterhead faceup with the top edge entering the printer first. For two ‑ sided (duplex) printing, load letterhead facedown with the bottom edge entering the printer first.
  • Load envelopes with the flap on the left side facedown.

5 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder.

Linking and unlinking trays

When the paper size and paper type for any trays are the same, the printer will link those trays. When one linked tray becomes empty, paper will feed from the next linked tray. It is recommended to give all unique paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in will not automatically link.

Linking and unlinking trays

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 41 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 41 · click to enlarge
Page 41

Loading paper and specialty media 41

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the tray settings to specify the paper size and type for the tray.
  • To link trays, make sure the paper size and type for the tray match with that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match with that of the other tray.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

Configuring a custom paper type name

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a new custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer settings on the computer (Windows only)

Access the Custom menu using the Local Printer Settings Utility.

Configuring a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 42 of the Lexmark MS410 user manual — Using the printer settings on the computer
Page 42 · click to enlarge
Page 42

Loading paper and specialty media 42

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a custom paper type.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Custom menu using the Local Printer Settings Utility or Printer Settings.

Assigning a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

3 From the Tray Configuration section, select a paper source, and then select a custom paper type under the paper type column.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

Page 43 of the Lexmark MS410 user manual — Moisture content
Page 43 · click to enlarge
Page 43

Paper and specialty media guide 43

Paper and specialty media guide

Additional information for printing on specialty media may be found in the Card Stock and Label Guide available at http://support.lexmark.com.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer trays can automatically feed paper weights up to 120‑g/m2 (32‑lb) bond grain long paper. The multipurpose feeder can automatically feed paper weights up to 163‑g/m2 (43‑lb) bond grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75‑g/m2 (20‑lb) bond grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches), we recommended to use 90 g/m2

(24 lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, then toner cannot fuse to it properly. If paper is too smooth, then it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time to several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Page 44 of the Lexmark MS410 user manual — Selecting preprinted forms and letterhead
Page 44 · click to enlarge
Page 44

Paper and specialty media guide 44

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–90‑g/m2 (16–24‑lb) bond paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) less than ±2.5 mm (±0.10 inch), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms:
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough ‑ edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple ‑ part forms or documents

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 90 g/m 2 (16 to 24 lb) weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Page 45 of the Lexmark MS410 user manual — Using recycled paper and other office papers
Page 45 · click to enlarge
Page 45

Paper and specialty media guide 45

  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Page 46 of the Lexmark MS410 user manual — Tips on using card stock
Page 46 · click to enlarge
Page 46

Paper and specialty media guide 46

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or the Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Using specialty media

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • Make sure the Paper Type is Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure that the card stock can withstand temperatures up to 240°C (464°F) without releasing hazardous emissions.
Page 47 of the Lexmark MS410 user manual — Tips on using labels
Page 47 · click to enlarge
Page 47

Paper and specialty media guide 47

  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 230°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb bond) paper or 25% cotton. All ‑ cotton envelopes must not exceed 70 ‑ g/m 2 (20 ‑ lb bond) weight.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For more information on label printing, characteristics, and design, see the Card Stock & Label Guide available at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 240°C (464°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 172‑kPa (25‑psi) pressure without

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
Page 48 of the Lexmark MS410 user manual — Storing paper
Page 48 · click to enlarge
Page 48

Paper and specialty media guide 48

  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 inch) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Make sure the adhesive backing does not reach to the edge of the sheet. Zone coating of the adhesive should be at least 1 mm (0.04 inch) away from edges. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, then remove a 2 ‑ mm (0.08 ‑ inch) strip on the leading and driver edge, and then use a non ‑ oozing adhesive.
  • Portrait orientation is recommended, especially when printing bar codes.

Tips on using letterhead

  • Use letterhead designed specifically for laser printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together.
  • Page orientation is important when printing on letterhead. For information on how to load letterhead, see: – “Loading trays” on page 32 – “Loading the multipurpose feeder” on page 37

Tips on using transparencies

  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Feed transparencies from the standard tray, or the multipurpose feeder.
  • Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures up to 185°C (365°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • Note: If the transparency weight is set to Heavy and the transparency texture is set to Rough in the Paper menu, then transparencies can be printed at a temperature up to 195°C (383°F).
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex, fan, and straighten the stack to prevent sheets from sticking together.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.
Page 49 of the Lexmark MS410 user manual — A6
Page 49 · click to enlarge
Page 49

Paper and specialty media guide 49

Supported paper sizes, types, and weights

For information on card stock and labels, see the Card Stock & Label Guide.

Supported paper sizes

Paper size Standard tray Optional 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

A4

210 x 297 mm (8.3 x 11.7 in.)

A5

148 x 210 mm (5.8 x 8.3 in.)

A6

105 x 148 mm (4.1 x 5.8 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.) X

216 x 279 mm (8.5 x 11 in.)

216 x 356 mm (8.5 x 14 in.)

184 x 267 mm (7.3 x 10.5 in.)

216 x 340 mm (8.5 x 13.4 in.)

216 x 330 mm (8.5 x 13 in.)

140 x 216 mm (5.5 x 8.5 in.)

76.2 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.)

98 x 225 mm (3.9 x 8.9 in.)

1 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

2 Universal is supported in the standard tray only if the paper size is at least 105 x 148 mm (4.1 x 5.8 in.). Universal is supported in the optional 250- or 550-sheet tray only if the paper size is at least 148 x 210 mm (5.8 x 8.3 in.). Universal is supported in duplex mode only if the width is at least 210 mm (8.3 in.) and the length is at least 279 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Show 8 more labels / short text on this page
Letter · Legal · Executive · Oficio (Mexico)1 · Folio · Statement · Universal2 · 9 Envelope
Page 50 of the Lexmark MS410 user manual — Supported paper types and weights
Page 50 · click to enlarge
Page 50

Paper and specialty media guide 50

Paper size Standard tray Optional 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

105 x 241 mm (4.1 x 9.5 in.)

110 x 220 mm (4.3 x 8.7 in.)

C5 Envelope 162 x 229 mm (6.4 x 9 in.) X X X

176 x 250 mm (6.9 x 9.8 in.)

229 x 356 mm (9 x 14 in.)

1 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

2 Universal is supported in the standard tray only if the paper size is at least 105 x 148 mm (4.1 x 5.8 in.). Universal is supported in the optional 250- or 550-sheet tray only if the paper size is at least 148 x 210 mm (5.8 x 8.3 in.). Universal is supported in duplex mode only if the width is at least 210 mm (8.3 in.) and the length is at least 279 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Supported paper types and weights

The standard tray supports 60–90‑g/m2 (16–24‑lb) paper weights. The optional tray supports 60–120‑g/m2 (16–32‑lb) paper weights. The multipurpose feeder supports 60–163‑g/m2 (16–43‑lb) paper weights.

Lexmark MS410 — Supported paper types and weights diagram (page 50)
Fig. 45 · Supported paper types and weights

Paper type 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

Show 4 more labels / short text on this page
10 Envelope · DL Envelope · B5 Envelope · Other Envelope
Page 51 of the Lexmark MS410 user manual — Supported paper types and weights
Page 51 · click to enlarge
Page 51

Paper and specialty media guide 51

Paper type 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.

2 Bond and Heavy Paper are supported in duplex mode up to 90‑g/m2 (24‑lb) paper weight.

Show 5 more labels / short text on this page
Preprinted · Colored Paper · Light Paper · Heavy Paper2 · Rough/Cotton X
Page 52 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 52 · click to enlarge
Page 52

Printing

This chapter covers printing, printer reports, and job cancelation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 105 and “Storing paper” on page 48.

Printing a document

Printing a document

1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Printing 52

Page 53 of the Lexmark MS410 user manual — For Windows users
Page 53 · click to enlarge
Page 53
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness setting.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, adjust the toner darkness settings using the Local Printer Settings Utility or Printer Settings.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Print Settings > > Quality Menu > > Toner Darkness >

2 Adjust the toner darkness.

3 Press .

Printing information pages

For more information on printing information pages, see “Printing a menu settings page” on page 29 and “Printing a network setup page” on page 30.

Printing a font sample list

From the printer control panel, navigate to either of the following:

> Reports > > Print Fonts > > PCL Fonts >

> Reports > > Print Fonts > > PostScript Fonts >

Canceling a print job

Canceling a print job from the printer control panel

From the printer control panel, press

> .

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

Printing 53 · or

Page 54 of the Lexmark MS410 user manual — For Macintosh users
Page 54 · click to enlarge
Page 54

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 54 · In Windows 8 · a Click

Page 55 of the Lexmark MS410 user manual — Default Source menu
Page 55 · click to enlarge
Page 55

Understanding the printer menus 55

Understanding the printer menus

Menus list

Paper Menu Reports Network/Ports3

Paper Size/Type Configure MP

Network Setup Page1

Profiles List Print Fonts

Set Date and Time

1 Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.

2 Depending on the printer setup, this menu item appears as Standard Network or Network [x].

3 The menu items in this menu appear only in network printers or printers connected to print servers.

Paper menu

Default Source menu

Set a default paper source for all print jobs.

Tray [x] MP Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for MP Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
Show 26 more labels / short text on this page
Default Source · Menu Settings Page · Active NIC · Device Statistics · Standard Network2 · Reports · Substitute Size · Network card TCP/IP · Paper Texture · Paper Weight · Print Directory · IPv6 · Paper Loading · Asset Report · Wireless · Custom Types · AppleTalk · Universal Setup · Standard USB · SMTP Setup · Security Settings · Security Audit Log · General Settings · Print Settings · Use To · Default Source
Page 56 of the Lexmark MS410 user manual — Paper Size/Type menu
Page 56 · click to enlarge
Page 56

Understanding the printer menus 56

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and the multipurpose feeder.

Specify the type of paper loaded in each tray.

Plain Paper Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Use To · Tray [x] Size · Tray [x] Type

Page 57 of the Lexmark MS410 user manual — Paper Size/Type menu
Page 57 · click to enlarge
Page 57

Understanding the printer menus 57

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. Make sure to set the paper size value.

Specify the type of paper loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Custom Type [x] is the factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Type to appear as a menu.

Use To · MP Feeder Size · MP Feeder Type

Page 58 of the Lexmark MS410 user manual — Paper Size/Type menu
Page 58 · click to enlarge
Page 58

Understanding the printer menus 58

Specify the paper size being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Show 5 more labels / short text on this page
Use To · Manual Paper Size · Manual Paper Type · Manual Envelope Size · Manual Envelope Type
Page 59 of the Lexmark MS410 user manual — Paper Texture menu
Page 59 · click to enlarge
Page 59

Understanding the printer menus 59

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the default paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First sets the multipurpose feeder as the primary paper source regardless of settings.

Substitute Size menu

Substitute a specified paper size if the requested paper size is not available.

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without Change Paper appearing.

Paper Texture menu

Specify the relative texture of the plain paper loaded.

Specify the relative texture of the card stock loaded.

  • Normal is the factory default setting.
  • The options appear only if card stock is supported.

Specify the relative texture of the transparencies loaded.

Specify the relative texture of the recycled paper loaded.

Show 14 more labels / short text on this page
Use To · Configure MP · Cassette Manual First · Use To · Substitute Size · Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough
Page 60 of the Lexmark MS410 user manual — Configure MP menu
Page 60 · click to enlarge
Page 60

Understanding the printer menus 60

Specify the relative texture of the labels loaded.

Specify the relative texture of the bond paper loaded.

Specify the relative texture of the envelopes loaded.

Specify the relative texture of the rough envelopes loaded.

Specify the relative texture of the letterhead loaded.

Specify the relative texture of the preprinted paper loaded.

Specify the relative texture of the colored paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the cotton paper loaded.

Specify the relative texture of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only if the custom type is supported.
Show 23 more labels / short text on this page
Use To · Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough
Page 61 of the Lexmark MS410 user manual — Paper Weight menu
Page 61 · click to enlarge
Page 61

Understanding the printer menus 61

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Specify the relative weight of the labels loaded.

Specify the relative weight of the bond paper loaded.

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Show 21 more labels / short text on this page
Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy
Page 62 of the Lexmark MS410 user manual — Paper Loading menu
Page 62 · click to enlarge
Page 62

Understanding the printer menus 62

Specify the relative weight of the colored paper loaded.

Specify that the weight of the paper loaded is light.

Specify that the weight of the paper loaded is heavy.

Specify the relative weight of the cotton or rough paper loaded.

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.

Paper Loading menu

Determine and set two‑sided printing for all print jobs that specify Recycled as the paper type.

Determine and set two‑sided printing for all print jobs that specify Bond as the paper type.

Determine and set two‑sided printing for all print jobs that specify Letterhead as the paper type.

Determine and set two‑sided printing for all print jobs that specify Preprinted as the paper type.

Determine and set two‑sided printing for all print jobs that specify Colored as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.
Show 22 more labels / short text on this page
Use To · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy · Cotton/Rough Weight · Light Normal Heavy · Custom [x] Weight · Light Normal Heavy · Use To · Recycled Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off
Page 63 of the Lexmark MS410 user manual — Custom Types menu
Page 63 · click to enlarge
Page 63

Understanding the printer menus 63

Determine and set two‑sided printing for all print jobs that specify Light as the paper type.

Determine and set two‑sided printing for all print jobs that specify Heavy as the paper type.

Determine and set two‑sided printing for all print jobs that specify Custom [x] as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.

Custom Types menu

Associate a paper or specialty media type with a Custom Type [x] name or a user‑defined custom name created in the Embedded Web Server, in the Local Printer Settings Utility, or in MarkVisionTM Professional.

Paper Card Stock Transparency Rough/Cotton Labels Envelope

  • Paper is the factory default setting for Custom Type [x].
  • The specialty media type must be supported in the selected tray or feeder in order to print from that source.

Specify a paper type when the Recycled setting is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Envelope Cotton

  • Paper is the factory default setting.
  • The Recycled paper type must be supported in the selected tray or feeder in order to print from that source.
Show 10 more labels / short text on this page
Use To · Light Loading · Duplex Off · Heavy Loading · Duplex Off · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled
Page 64 of the Lexmark MS410 user manual — Reports menu
Page 64 · click to enlarge
Page 64

Understanding the printer menus 64

Universal Setup menu

Identify the units of measure.

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Set the portrait width.

3–8.5 inches 76–216 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. You can increase the width in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. You can increase the width in 1 ‑ mm increments.

Set the portrait height.

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. You can increase the height in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. You can increase the height in 1 ‑ mm increments.

Specify the feed direction if the paper can be loaded in either direction.

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Reports menu

Reports menu

Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.

Device Statistics Print a report containing printer statistics, such as supply information and details about printed pages.

Show 7 more labels / short text on this page
Use To · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction · Use To
Page 65 of the Lexmark MS410 user manual — Standard Network or Network [x] menu
Page 65 · click to enlarge
Page 65

Understanding the printer menus 65

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

Profiles List Print a list of profiles stored in the printer.

Print a report of all the fonts available for the printer language currently set in the printer.

PCL Fonts PostScript Fonts

Print Directory Print a list of all the resources stored in an optional flash memory card.

  • Job Buffer Size must be set to 100%.
  • Make sure the optional flash memory is installed correctly and working properly.
  • This menu item appears only when an optional flash memory card is installed.

Asset Report Print a report containing printer asset information, such as serial number and model name.

Network/Ports menu

The menus in this section only appear in network printers or printers connected to print servers.

Active NIC menu

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only when an optional network card is installed.

Standard Network or Network [x] menu

Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
Show 7 more labels / short text on this page
Use To · Print Fonts · Use To · Active NIC · Use To · PCL SmartSwitch · On Off
Page 66 of the Lexmark MS410 user manual — Reports menu
Page 66 · click to enlarge
Page 66

Understanding the printer menus 66

Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the network input buffer.

Disabled Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Reports menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Reports
  • Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Show 9 more labels / short text on this page
Use To · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Mac Binary PS · On Off Auto · Use To
Page 67 of the Lexmark MS410 user manual — TCP/IP menu
Page 67 · click to enlarge
Page 67

Understanding the printer menus 67

Network Card menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Network Card
  • Network/Ports > Network [x] > Network [x] Setup > Network Card

View the connection status of the network card.

View Card Speed View the speed of an active network card.

View the network addresses.

UAA LAA

Job Timeout 0–255 seconds Set the amount of time it takes for a network print job to be canceled.

  • 90 seconds is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value of 1–9 is selected, then the setting is saved as 10.

TCP/IP menu

To access the menu, navigate to any of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Set Hostname Set the host name.

  • This setting can be changed only from the Embedded Web Server.
  • The host name can be up to 15 characters and can be a US ‑ ASCII or alphanumeric character, or hyphen.

IP Address View or change the current TCP/IP address.

Netmask View or change the current TCP/IP netmask.

Gateway View or change the current TCP/IP gateway.

Specify the DHCP address and parameter assignment.

Show 7 more labels / short text on this page
Use To · View Card Status · Connected Disconnected · Network Address · Use To · Enable DHCP · On Off
Page 68 of the Lexmark MS410 user manual — IPv6 menu
Page 68 · click to enlarge
Page 68

Understanding the printer menus 68

Specify the Zero Configuration Networking setting.

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address View or change the current WINS server address.

View or change the current DDNS setting.

View or change the current mDNS setting.

DNS Server Address View or change the current DNS server address.

Backup DNS Server Address View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

View or change the current HTTPS setting.

IPv6 menu

To access the menu, navigate to any of the following:

  • Network/Ports > Standard Network > Standard Network Setup > IPv6
  • Network/Ports > Network [x] > Network [x] Setup > IPv6

Enable Internet Protocol Version Six (IPv6) in the printer.

IPv6 uses bigger numbers to create IP addresses.

Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router.

* These settings can be changed only from the Embedded Web Server.

Show 18 more labels / short text on this page
Use To · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No · Enable HTTPS · Yes No · Use To · Enable IPv6 · On Off · Auto Configuration · On Off
Page 69 of the Lexmark MS410 user manual — AppleTalk menu
Page 69 · click to enlarge
Page 69

Understanding the printer menus 69

Set Hostname* Set the host name.

View Address* View the current IPv6 addresses.

View Router Address* View the current router address.

Enable DHCPv6 in the printer.

* These settings can be changed only from the Embedded Web Server.

Wireless menu

To access the menu, navigate to any of the following:

  • Network/Ports > Network [x] > Network [x] Setup > Wireless

Specify the network mode.

  • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer.
  • Infrastructure lets the printer access a network using an access point.

Specify the wireless standard for the wireless network.

802.11b/g 802.11b/g/n

Choose Network Select an available network for the printer to use.

View Signal Quality View the quality of the wireless connection.

View Security Mode View the encryption method for the wireless network.

AppleTalk menu

To access the menu, navigate to any of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network Setup [x] > AppleTalk
Show 7 more labels / short text on this page
Use To · Enable DHCPv6 · On Off · Use To · Network Mode · Infrastructure Ad hoc · Compatibility
Page 70 of the Lexmark MS410 user manual — Standard USB menu
Page 70 · click to enlarge
Page 70

Understanding the printer menus 70

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

View Address Show the assigned AppleTalk address.

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Show 11 more labels / short text on this page
Use To · Activate · Yes No · Set Zone · Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto
Page 71 of the Lexmark MS410 user manual — SMTP Setup menu
Page 71 · click to enlarge
Page 71

Understanding the printer menus 71

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering.
  • The USB buffer size value can be changed in 1-KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

SMTP Setup menu

Primary SMTP Gateway Specify SMTP server gateway and port information.

Secondary SMTP Gateway Port

5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.

Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.

Show 10 more labels / short text on this page
Use To · USB Buffer · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway · Use To · Secondary SMTP Gateway · SMTP Timeout
Page 72 of the Lexmark MS410 user manual — Security Audit Log menu
Page 72 · click to enlarge
Page 72

Understanding the printer menus 72

Set the printer to use SSL for increased security when connecting to the SMTP server.

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specify the type of user authentication required for printing privileges.

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Device‑Initiated E‑mail

Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.

None Use Device SMTP Credentials

  • None is the factory default setting for Device ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.

Security menu

Security Audit Log menu

Export Log Let an authorized user export the audit log.

  • To export the audit log from the printer control panel, connect a flash drive to the printer.
  • You can also download the audit log from the Embedded Web Server, and then save it on your computer.

Specify whether or not audit logs are deleted.

Delete now Do not delete

Show 8 more labels / short text on this page
Use To · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device Userid · Device Password · Use To · Delete Log
Page 73 of the Lexmark MS410 user manual — Set Date and Time menu
Page 73 · click to enlarge
Page 73

Understanding the printer menus 73

Specify how and whether or not audit logs are created.

Yes No Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time View the current date and time settings for the printer.

Manually Set Date and Time

Enter the date and time.

Select the time zone.

[list of time zones]

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

  • On is the factory default setting.
  • Enable NTP is automatically set to Off if you manually set the date and time.
Show 10 more labels / short text on this page
Use To · Configure Log · Enable Audit · Use To · [input date/time] · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off
Page 74 of the Lexmark MS410 user manual — General Settings menu
Page 74 · click to enlarge
Page 74

Understanding the printer menus 74

Settings menu

General Settings menu

Set the language of the text appearing on the printer display.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

View the estimates of the supplies on the printer control panel, Embedded Web Server, menu settings, and the device statistics reports.

Show estimates Do not show estimates

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job.
Show 4 more labels / short text on this page
Use To · Display Language · Show Supply Estimates · Eco-Mode
Page 75 of the Lexmark MS410 user manual — Settings menu
Page 75 · click to enlarge
Page 75

Understanding the printer menus 75

Run the setup wizard.

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the country or region selection screen, the default becomes No.

Specify the unit of measurement for paper sizes.

  • US is the factory default setting.
  • The initial setting is determined by your country or region selection in the initial setup wizard.

Set the amount of time the printer waits after a job is printed before it goes into a reduced power state.

  • “30 min” is the factory default setting.
  • “Disabled” appears only when Energy Conserve is set to Off.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.

Set the amount of time the printer waits before it enters Hibernate mode.

Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month

  • “Disabled” is the factory default setting in all countries except European Union countries and Switzerland.
  • “3 days” is the factory default setting for all European Union countries and Switzerland.

Set the printer to Hibernate mode even if there is an active Ethernet connection.

Hibernate Timeout on Connection

Hibernate Do Not Hibernate

Set the amount of time in seconds the printer waits before the it returns to a ready state.

Show 14 more labels / short text on this page
Use To · Run Initial setup · Yes No · Paper Sizes · US Metric · Timeouts · Sleep Mode · Disabled 1–120 min · Timeouts · Hibernate Timeout · Timeouts · Timeouts · Screen Timeout · 15–300 sec
Page 76 of the Lexmark MS410 user manual — Settings menu
Page 76 · click to enlarge
Page 76

Understanding the printer menus 76

Display a message that lets you reset the screen timeout timer instead of returning to the printer display.

Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.

  • “90 sec” is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs.

Set the amount of time in seconds the printer waits for additional data before canceling a print job.

Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.
  • On is the factory default setting. On sets the printer to automatically dump blank pages or partially printed pages to the standard bin after a jammed page has been cleared.
  • Off requires the user to remove all pages from all possible jam locations.

Successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.
Show 22 more labels / short text on this page
Use To · Timeouts · Prolong Screen Timeout · On Off · Timeouts · Print Timeout · Disabled 1–255 sec · Timeouts · Wait Timeout · Disabled 15–65535 sec · Print Recovery · Auto Continue · Disabled 5–255 sec · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Jam Assist · On Off · Print Recovery · Page Protect · Off On
Page 77 of the Lexmark MS410 user manual — Setup menu
Page 77 · click to enlarge
Page 77

Understanding the printer menus 77

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do nothing Sleep Hibernate

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts to a long press of the Sleep button.

Do nothing Sleep Hibernate

Use the printer factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore retains the user ‑ defined settings.
  • Restore Now sets all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory are not affected.

Select a custom home message that appears as an alternating display of the printer status.

Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1

Print Settings

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PCL Emulation is the factory default setting.
  • PostScript emulation uses a PostScript interpreter for processing print jobs.
  • PCL Emulation uses a PCL interpreter for processing print jobs.
  • Setting a printer language default does not prevent a software program from sending print jobs that use another printer language.
Show 6 more labels / short text on this page
Use To · Press Sleep Button · Factory Defaults · Custom Home Message · Use To · Printer Language
Page 78 of the Lexmark MS410 user manual — Print Settings
Page 78 · click to enlarge
Page 78

Understanding the printer menus 78

Set the logical and physical printable area.

  • Normal is the factory default setting. When attempting to print data on the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting. This setting affects only pages printed using a PCL 5 interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

  • RAM is the factory default setting. Storing downloads in the RAM is temporary.
  • Storing downloads in a flash memory places them in permanent storage. Downloads remain in the flash memory even when the printer is turned off.
  • This menu item appears only when an optional flash memory is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

  • Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.
Show 7 more labels / short text on this page
Use To · Print Area · Normal Whole Page · Download Target · RAM Flash · Resource Save · On Off
Page 79 of the Lexmark MS410 user manual — Finishing menu
Page 79 · click to enlarge
Page 79

Understanding the printer menus 79

Finishing menu

Specify whether two‑sided (duplex) printing is set as the default for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the software program.

For Windows users:

1 Click File > Print. 2 Click Properties, Preferences, Options, or Setup.

For Macintosh users:

1 Choose File > Print. 2 Adjust the settings from the print dialog and pop‑up menus.

Define the way two‑sided pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting. Long Edge binds pages along their long edge (left edge for portrait and top edge for landscape).
  • Short Edge binds pages along their short edge (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

Specify whether to insert blank pages in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether to insert blank separator sheets.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to (1,1,1) (2,2,2). If Collate is set to (1,2,3) (1,2,3), then a blank page is inserted between each set of printed pages, such as after all page 2's and after all page 3's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specify the paper source for separator sheets.

Tray [x] Multi‑Purpose Feeder

Show 8 more labels / short text on this page
Use To · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Separator Source
Page 80 of the Lexmark MS410 user manual — Quality menu
Page 80 · click to enlarge
Page 80

Understanding the printer menus 80

Print multiple‑page images on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specify the positioning of multiple‑page images when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

Specify the orientation of a multiple‑page document.

Print a border when using Paper Saver.

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions Isolated

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
Show 11 more labels / short text on this page
Use To · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Use To · Print Resolution · Pixel Boost · Toner Darkness
Page 81 of the Lexmark MS410 user manual — Utilities menu
Page 81 · click to enlarge
Page 81

Understanding the printer menus 81

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • You can set this option from the printer software. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

Utilities menu

Format the flash memory.

  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • Yes deletes all data stored in the flash memory.
  • No cancels the format request.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a non ‑ defective flash memory card is installed.

Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off or reset the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

Show 12 more labels / short text on this page
Use To · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Format Flash · Yes No · Coverage Estimator · Off On
Page 82 of the Lexmark MS410 user manual — PCL Emul menu
Page 82 · click to enlarge
Page 82

Understanding the printer menus 82

XPS menu

Print a page containing information on errors, including XML markup errors.

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Disable the SysStart file.

Establish the font search order.

  • Resident is the factory default setting.
  • This menu item is available only when a formatted flash memory card is installed and operating properly.
  • Make sure the flash memory card is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.

PCL Emul menu

Specify the set of fonts used by the Font Name menu.

Resident Download Flash All

  • “Resident” is the factory default setting. “Resident” shows the factory default set of fonts downloaded in the RAM.
  • “Download” shows all the fonts downloaded in the RAM.
  • “Flash” shows all fonts resident in that option. The optional flash memory card must be properly formatted and cannot be read/write ‑ , write ‑ , or password ‑ protected.
  • “All” shows all fonts available to any option.

Identify a specific font and the option where it is stored.

Show 13 more labels / short text on this page
Use To · Print Error Pages · Off On · Use To · Print PS Error · On Off · On Off · Font Priority · Resident Flash · Use To · Font Source · Font Name · Courier 10
Page 83 of the Lexmark MS410 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 83 · click to enlarge
Page 83

Understanding the printer menus 83

Specify the symbol set for each font name.

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific program, such as math symbols for scientific text. Only the supported symbol sets are shown.

Change the point size for scalable typographic fonts.

1.00–1008.00

  • 12 is the factory default setting.
  • Point size refers to the height of the characters in the font. One point equals approximately 0.014 inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specify the font pitch for scalable monospaced fonts.

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but it cannot be changed.

Specify the orientation of text and graphics on the page.

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow printing of eighty 10 ‑ pitch characters.
Show 13 more labels / short text on this page
Use To · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width
Page 84 of the Lexmark MS410 user manual — XPS menu
Page 84 · click to enlarge
Page 84

Understanding the printer menus 84

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • Off is the factory default setting.
  • None cannot be selected. It is only displayed when it is selected by the PCL 5 interpreter. It also ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Display the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Restore all tray and feeder assignments to their factory default settings.

Show 13 more labels / short text on this page
Use To · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults · Tray Renumber · Restore Defaults · Yes No
Page 85 of the Lexmark MS410 user manual — Check your first draft for accuracy
Page 85 · click to enlarge
Page 85

Saving money and the environment 85

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see “Using Eco‑Mode” on page 86.

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 45.

Conserving supplies

Use both sides of the paper

If your printer model supports duplex printing, then you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or from the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or from the Lexmark Toolbar to see how the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.
Page 86 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 86 · click to enlarge
Page 86

Saving money and the environment 86

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 105.

Saving energy

Using Eco ‑ Mode

Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.

1 From the printer control panel, navigate to:

> Settings > > General Settings > > Eco‑Mode > > select the setting you want

Off Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the performance specifications for your printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.

Energy/Paper Use all the settings associated with Energy and Paper modes.

  • Paper
  • Enable the automatic two ‑ sided (duplex) printing feature.
  • Turn off print log features.

2 Press .

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If your are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

Use To

Page 87 of the Lexmark MS410 user manual — Using the printer control panel
Page 87 · click to enlarge
Page 87

Saving money and the environment 87

3 From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > General Settings >

2 Press Press Sleep Button or Press and Hold Sleep Button, and then press .

3 Press Hibernate > .

  • When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode.
  • When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode.

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.

Available settings range from 1 to 120 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 From the Embedded Web Server, click Settings > General Settings > Timeouts.

2 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

3 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > General Settings > > Timeouts > > Sleep Mode >

2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.

3 Press .

Page 88 of the Lexmark MS410 user manual — Using the printer settings on the computer (Windows only)
Page 88 · click to enlarge
Page 88

Saving money and the environment 88

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Hibernate Timeout menu using the Local Printer Settings Utility or Print Settings.

Using Schedule Power Modes

Schedule Power Modes lets the user schedule when the printer goes into a reduced power state or into the Ready state.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Schedule Power Modes.

3 From the Action menu, select the power mode.

4 From the Time menu, select the time.

5 From the Day(s) menu, select the day or days.

6 Click Add.

Using the printer settings on the computer (Windows only)

  • Access the Schedule Power Modes menu using the Local Printer Settings Utility.
Page 89 of the Lexmark MS410 user manual — Returning Lexmark cartridges for reuse or recycling
Page 89 · click to enlarge
Page 89

Saving money and the environment 89

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 90 of the Lexmark MS410 user manual — Statement of Volatility
Page 90 · click to enlarge
Page 90

Securing the printer 90

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop computers in the location shown to secure the printer in place.

Lexmark MS410 — Securing the printer diagram (page 90)
Fig. 46 · Securing the printer
Lexmark MS410 — Securing the printer diagram (page 90)
Fig. 47 · Securing the printer

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store operating system, device settings, and network information.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.
Page 91 of the Lexmark MS410 user manual — Finding printer security information
Page 91 · click to enlarge
Page 91

Securing the printer 91

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Erasing non ‑ volatile memory

1 Turn off the printer.

2 From the printer control panel, hold down and the right arrow button while turning the printer on. Release the buttons only when the Configuration menu appears.

3 Press the arrow buttons until Wipe All Settings appears, and then press .

The printer will restart several times during this process.

4 Press the arrow buttons until Exit Config Menu appears, and then press .

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server Administrator’s Guide for additional information:

1 Go to http://support.lexmark.com, and then navigate to Software and Solutions > Other Applications.

2 Click the Manuals tab, and then select the Embedded Web Server Administrator’s Guide.

Page 92 of the Lexmark MS410 user manual — Using the Embedded Web Server
Page 92 · click to enlarge
Page 92

Maintaining the printer 92

Maintaining the printer

Cleaning the printer

Cleaning the printer

1 Make sure that the printer is turned off and unplugged from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

5 Make sure all areas of the printer are dry before sending a new print job.

Checking the status of parts and supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of parts and supplies

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Page 93 of the Lexmark MS410 user manual — Ordering toner cartridges
Page 93 · click to enlarge
Page 93

Maintaining the printer 93

Using the printer control panel

From the printer control panel, navigate to:

> Reports > > Device Statistics >

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, initial estimates assume future supplies consumption based on the International Organization for Standardization* test methods and page content.

* Average continuous black declared cartridge yield in accordance with ISO/IEC 19752.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Ordering toner cartridges

  • The estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.
Page 94 of the Lexmark MS410 user manual — Estimated number of remaining pages
Page 94 · click to enlarge
Page 94

Maintaining the printer 94

Item Return Program cartridge

For the United States and Canada

High Yield Toner Cartridge 501H

Extra High Yield Toner Cartridge 501X1

Ultra High Yield Toner Cartridge 501U2

For the European Union, European Economic Area , and Switzerland

High Yield Toner Cartridge 502H

Extra High Yield Toner Cartridge 502X1

Ultra High Yield Toner Cartridge 502U2

For the Asia Pacific Region (includes Australia and New Zealand)

High Yield Toner Cartridge 503H

Extra High Yield Toner Cartridge 503X1

Ultra High Yield Toner Cartridge 503U2

For Latin America (includes Puerto Rico and Mexico)

High Yield Toner Cartridge 504H

Extra High Yield Toner Cartridge 504X1

Ultra High Yield Toner Cartridge 504U2

For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States

High Yield Toner Cartridge 505H

Extra High Yield Toner Cartridge 505X1

Ultra High Yield Toner Cartridge 505U2

1 This cartridge is supported only in MS410d, MS410dn, MS510dn, MS610dn, and MS610de printer models.

2 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

For more information on countries located in each region, visit www.lexmark.com/regions.

High Yield Toner Cartridge 500HA1

1 This cartridge is supported only in MS310d and MS310dn printer models.

2 This cartridge is supported only in MS410d and MS410dn printer models.

3 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

Show 7 more labels / short text on this page
Toner Cartridge 501 · Toner Cartridge 502 · Toner Cartridge 503 · Toner Cartridge 504 · Toner Cartridge 505 · Item Regular cartridge · Worldwide
Page 95 of the Lexmark MS410 user manual — Storing supplies
Page 95 · click to enlarge
Page 95

Maintaining the printer 95

Extra High Yield Toner Cartridge 500XA2

Ultra High Yield Toner Cartridge 500UA3

1 This cartridge is supported only in MS310d and MS310dn printer models.

2 This cartridge is supported only in MS410d and MS410dn printer models.

3 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner from toner cartridge.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 500Z 500ZA

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Item Regular cartridge

Page 96 of the Lexmark MS410 user manual — Replacing the toner cartridge
Page 96 · click to enlarge
Page 96

Maintaining the printer 96

Replacing supplies

Replacing the toner cartridge

1 Press the button on the right side of the printer, and then open the front door.

Lexmark MS410 — Replacing the toner cartridge diagram (page 96)
Fig. 48 · Replacing the toner cartridge
Lexmark MS410 — Replacing the toner cartridge diagram (page 96)
Fig. 49 · Replacing the toner cartridge

2 Pull the toner cartridge out using the handle.

Lexmark MS410 — Replacing the toner cartridge diagram (page 96)
Fig. 50 · Replacing the toner cartridge

3 Unpack the toner cartridge, and then remove all packing materials.

4 Shake the new cartridge to redistribute the toner.

Lexmark MS410 — Replacing the toner cartridge diagram (page 96)
Fig. 51 · Replacing the toner cartridge

5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Page 97 of the Lexmark MS410 user manual — Replacing the imaging unit
Page 97 · click to enlarge
Page 97

Maintaining the printer 97

Lexmark MS410 — Replacing the imaging unit diagram (page 97)
Fig. 52 · Replacing the imaging unit
Lexmark MS410 — Replacing the imaging unit diagram (page 97)
Fig. 53 · Replacing the imaging unit

6 Close the front door.

Replacing the imaging unit

1 Press the button on the right side of the printer, and then open the front door.

2 Pull the toner cartridge out using the handle.

Page 98 of the Lexmark MS410 user manual — Replacing the imaging unit
Page 98 · click to enlarge
Page 98

Maintaining the printer 98

3 Lift the green handle, and then pull the imaging unit out of the printer.

Lexmark MS410 — Replacing the imaging unit diagram (page 98)
Fig. 54 · Replacing the imaging unit

4 Unpack the new imaging unit, and then shake it.

Lexmark MS410 — Replacing the imaging unit diagram (page 98)
Fig. 55 · Replacing the imaging unit

5 Remove all packing materials from the imaging unit.

Lexmark MS410 — Replacing the imaging unit diagram (page 98)
Fig. 56 · Replacing the imaging unit
Page 99 of the Lexmark MS410 user manual — Before moving the printer
Page 99 · click to enlarge
Page 99

Maintaining the printer 99

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark MS410 — Moving the printer diagram (page 99)
Fig. 57 · Moving the printer
Lexmark MS410 — Moving the printer diagram (page 99)
Fig. 58 · Moving the printer

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

8 Close the front door.

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
Page 100 of the Lexmark MS410 user manual — Shipping the printer
Page 100 · click to enlarge
Page 100

Maintaining the printer 100

  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
Lexmark MS410 — Moving the printer to another location diagram (page 100)
Fig. 59 · Moving the printer to another location
Lexmark MS410 — Moving the printer to another location diagram (page 100)
Fig. 60 · Moving the printer to another location
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging.

Page 101 of the Lexmark MS410 user manual — Configuring supply notifications from the Embedded Web Server
Page 101 · click to enlarge
Page 101

Managing the printer 101

Managing the printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Press Enter to open the Web page of your printer.

3 Click Applications > Remote Operator Panel > Launch VNC Applet.

4 Click Click here to continue.

The virtual display works as an actual display would work on a printer control panel.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, network, and supplies.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Reports, and then click the type of report you want to view.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

Page 102 of the Lexmark MS410 user manual — Modifying confidential print settings
Page 102 · click to enlarge
Page 102

Managing the printer 102

  • Selectable alerts can be set on the toner cartridge and imaging unit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e-mail when the supply condition is reached. The status of the supply will appear on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Configuration > Other Settings tab > Security > Confidential Print Setup.

Notification Description

Page 103 of the Lexmark MS410 user manual — Creating a printer control panel PIN
Page 103 · click to enlarge
Page 103

Managing the printer 103

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within the specified time, all of the jobs for that user are deleted.

4 Save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click the Copy Printer Settings.

3 To change the language, select a language from the drop-down menu, and then click Click here to submit language.

4 Click Printer Settings.

5 Type the IP addresses of the source and target printers in their appropriate fields.

6 Click Copy Printer Settings.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 29.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 91.

From the printer control panel, navigate to:

> Settings > > General Settings > > Factory Defaults > > Restore Now >

Creating a printer control panel PIN

The Panel PIN Protect menu lets you restrict access to the menus from the printer control panel. To restrict access to the menus, create a Personal Identification Number (PIN), and then assign the PIN to each menu.

1 Open a Web browser, and then type the printer IP address in the address field.

Page 104 of the Lexmark MS410 user manual — Copying printer settings to other printers
Page 104 · click to enlarge
Page 104

Managing the printer 104

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Panel PIN Protect.

3 From the Create User PIN or Create Admin PIN sections, enter your PIN.

4 Click Modify.

5 From any menu in the Administrative Menus, Management, or Function Access sections, select User PIN Protected or Admin PIN Protected or Admin PIN and User PIN Protected.

6 Click Submit.

If you try to access a PIN‑protected menu from the printer control panel, the printer will require you to enter the PIN.

Page 105 of the Lexmark MS410 user manual — Load paper properly
Page 105 · click to enlarge
Page 105

Clearing jams

Carefully select paper and specialty media and load them properly to avoid most jams. For more information, see “Avoiding jams” on page 105. If jams occur, then follow the steps outlined in this chapter.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.

Correct loading of paper Incorrect loading of paper

Lexmark MS410 — Load paper properly diagram (page 105)
Fig. 61 · Load paper properly
Lexmark MS410 — Load paper properly diagram (page 105)
Fig. 62 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.

Clearing jams 105

Page 106 of the Lexmark MS410 user manual — Understanding jam messages and locations
Page 106 · click to enlarge
Page 106
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS410 — Understanding jam messages and locations diagram (page 106)
Fig. 63 · Understanding jam messages and locations
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
Lexmark MS410 — Use recommended paper diagram (page 106)
Fig. 64 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the computer or printer control panel.
  • Store paper according to manufacturer recommendations.

Understanding jam messages and locations

When a jam occurs, a message indicating the jam location and information to clear the jam appears on the printer display. Open the doors, covers, and trays indicated on the display to remove the jam.

  • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.

Clearing jams 106

Page 107 of the Lexmark MS410 user manual — Understanding jam messages and locations
Page 107 · click to enlarge
Page 107
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will print.
Lexmark MS410 — Understanding jam messages and locations diagram (page 107)
Fig. 65 · Understanding jam messages and locations
Lexmark MS410 — Understanding jam messages and locations diagram (page 107)
Fig. 66 · Understanding jam messages and locations

Area Printer control panel message

1 Standard bin Jam, standard bin [20y.xx] Remove the jammed paper.

2 Rear door Jam, rear door [20y.xx] Open the rear door, and then remove the jammed paper.

3 Tray 1 Jam, pull tray 1. Push down blue flap. [23y.xx]

Pull tray 1 completely out, then push the front duplex flap down, and then remove the jammed paper.

4 Tray [x] Jam, tray [x] [24y.xx] Pull the indicated tray out, and then remove the jammed paper.

5 Multipurpose feeder Jam, MP feeder. [250.xx] Remove all paper from the multipurpose feeder, and then remove the jammed paper.

6 Front door Jam, front door. [20y.xx] Open the front door, and then remove the toner cartridge, imaging unit, and jammed paper.

Clearing jams 107 · What to do

Page 108 of the Lexmark MS410 user manual — Jam, front door [20y.xx]
Page 108 · click to enlarge
Page 108

Jam, front door [20y.xx]

1 Press the button on the right side of the printer, and then open the front door.

2 Pull the toner cartridge out using the handle.

3 Lift the green handle, and then pull the imaging unit out of the printer.

Clearing jams 108

Page 109 of the Lexmark MS410 user manual — Jam, front door [20y.xx]
Page 109 · click to enlarge
Page 109

4 Place the imaging unit aside on a flat, smooth surface.

5 Lift the green flap in front of the printer.

Lexmark MS410 — Jam, front door [20y.xx] diagram (page 109)
Fig. 67 · Jam, front door [20y.xx]

6 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS410 — Jam, front door [20y.xx] diagram (page 109)
Fig. 68 · Jam, front door [20y.xx]

Clearing jams 109

Page 110 of the Lexmark MS410 user manual — Jam, front door [20y.xx]
Page 110 · click to enlarge
Page 110

7 Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside the printer, and then insert the imaging unit into the printer.

8 Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer, and then insert the cartridge into the printer.

9 Close the front door.

10 From the printer control panel, press to clear the message and continue printing.

Clearing jams 110

Page 111 of the Lexmark MS410 user manual — Jam, rear door [20y.xx]
Page 111 · click to enlarge
Page 111

Jam, rear door [20y.xx]

1 Press the button on the right side of the printer, and then open the front door.

2 Gently pull down the rear door.

Lexmark MS410 — Jam, rear door [20y.xx] diagram (page 111)
Fig. 69 · Jam, rear door [20y.xx]

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 111

Page 112 of the Lexmark MS410 user manual — Jam, standard bin [20y.xx]
Page 112 · click to enlarge
Page 112

4 Close the rear and front doors.

5 From the printer control panel, press to clear the message and continue printing.

Jam, standard bin [20y.xx]

1 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS410 — Jam, standard bin [20y.xx] diagram (page 112)
Fig. 70 · Jam, standard bin [20y.xx]

2 From the printer control panel, press to clear the message and continue printing.

Clearing jams 112

Page 113 of the Lexmark MS410 user manual — Jam, pull tray 1. Push down blue flap. [23y.xx]
Page 113 · click to enlarge
Page 113

Jam, pull tray 1. Push down blue flap. [23y.xx]

1 Pull the tray out completely.

Lexmark MS410 — Jam, pull tray 1. Push down blue flap. [23y.xx] diagram (page 113)
Fig. 71 · Jam, pull tray 1. Push down blue flap. [23y.xx]

2 Locate the blue lever, and then pull it down to release the jam.

Lexmark MS410 — Jam, pull tray 1. Push down blue flap. [23y.xx] diagram (page 113)
Fig. 72 · Jam, pull tray 1. Push down blue flap. [23y.xx]
Lexmark MS410 — Jam, pull tray 1. Push down blue flap. [23y.xx] diagram (page 113)
Fig. 73 · Jam, pull tray 1. Push down blue flap. [23y.xx]

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 113

Page 114 of the Lexmark MS410 user manual — Jam, tray [x] [24y.xx]
Page 114 · click to enlarge
Page 114
Lexmark MS410 — Jam, tray [x] [24y.xx] diagram (page 114)
Fig. 74 · Jam, tray [x] [24y.xx]

4 Insert the tray.

5 From the printer control panel, press to clear the message and continue printing.

Jam, tray [x] [24y.xx]

1 Pull out the tray completely.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS410 — Jam, tray [x] [24y.xx] diagram (page 114)
Fig. 75 · Jam, tray [x] [24y.xx]

Clearing jams 114

Page 115 of the Lexmark MS410 user manual — Jam, MP feeder [250.xx]
Page 115 · click to enlarge
Page 115

3 Insert the tray.

4 From the printer control panel, press to clear the message and continue printing.

Jam, MP feeder [250.xx]

1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

2 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS410 — Jam, MP feeder [250.xx] diagram (page 115)
Fig. 76 · Jam, MP feeder [250.xx]

3 Reload paper into the multipurpose feeder.

Lexmark MS410 — Jam, MP feeder [250.xx] diagram (page 115)
Fig. 77 · Jam, MP feeder [250.xx]

4 From the printer control panel, press to clear the message and continue printing.

Clearing jams 115

Page 116 of the Lexmark MS410 user manual — Imaging unit very low, [x] estimated pages remain [84.xy]
Page 116 · click to enlarge
Page 116

Troubleshooting

Understanding the printer messages

Cartridge, imaging unit mismatch [41.xy]

1 Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies.

2 Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.

  • Use a MICR toner cartridge and imaging unit for printing checks and other similar documents.
  • Use a non-MICR toner cartridge and imaging unit for regular print jobs.

Cartridge nearly low [88.xy]

If necessary, press on the printer control panel to clear the message and continue printing.

Cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace a toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, press on the printer control panel to clear the message and continue printing.

Cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, press on the printer control panel to clear the message and continue printing.

Imaging unit nearly low [84.xy]

If necessary, press on the printer control panel to clear the message and continue printing.

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

Troubleshooting 116

Page 117 of the Lexmark MS410 user manual — Close front door
Page 117 · click to enlarge
Page 117

If necessary, press on the printer control panel to clear the message and continue printing.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, press on the printer control panel to clear the message and continue printing.

Change [paper source] to [custom type name]. Load [orientation].

Try one or more of the following:

  • Load the correct size and type of paper in the tray, and then press on the printer control panel.

Change [paper source] to [custom string]. Load [orientation].

Try one or more of the following:

  • Load the correct size and type of paper in the tray, and then press on the printer control panel.

Change [paper source] to [paper size]. Load [orientation].

Try one or more of the following:

  • Load the correct size and type of paper in the tray, and then press on the printer control panel.

Change [paper source] to [paper type] [paper size]. Load [orientation].

Try one or more of the following:

  • Load the correct size and type of paper in the tray, and then press on the printer control panel.

Close front door

Close the front door of the printer.

Troubleshooting 117

Page 118 of the Lexmark MS410 user manual — Memory low, no Resource Save [35]
Page 118 · click to enlarge
Page 118

Complex page may misprint [39]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.
  • Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job.
  • Cancel the print job.
  • Install additional printer memory.

Defective flash memory [51]

Try one or more of the following:

  • Replace the defective flash memory card.
  • From the printer control panel, press to ignore the message and continue printing.
  • Cancel the current print job.

Paper too short [34]

Try one or more of the following:

  • Load the correct size of paper in the tray.
  • From the printer control panel, press to clear the message and print using a different tray.
  • Check the tray length and width guides and make sure the paper is loaded properly in the tray.
  • Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.
  • Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.
  • Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Cancel the print job.

Insert tray [x]

Insert the indicated tray into the printer.

Memory low, no Resource Save [35]

Try one or more of the following:

  • From the printer control panel, press to disable Resource Save, clear the message, and continue printing.
  • Install additional printer memory.

Troubleshooting 118

Page 119 of the Lexmark MS410 user manual — Load [paper source] with [custom string] [orientation]
Page 119 · click to enlarge
Page 119

Cannot collate large document [37]

Try one or more of the following:

  • From the printer control panel, press to print the portion of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

Cannot defrag flash memory [37]

Try one or more of the following:

  • From the printer control panel, press to stop the defragmentation and continue printing.
  • Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:

> Settings > > Print Settings > > Utilities Menu > > Format Flash > > Yes > • Install additional printer memory.

Load [paper source] with [custom type name] [orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Load [paper source] with [custom string] [orientation]

Try one or more of the following:

  • Load the indicated tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Troubleshooting 119

Page 120 of the Lexmark MS410 user manual — Load MP feeder with [custom string] [orientation]
Page 120 · click to enlarge
Page 120

Load [paper source] with [paper size] [orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size of paper.
  • From the printer control panel, press to clear the message and continue printing.

Load [paper source] with [paper type] [paper size] [orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Load MP feeder with [custom type name] [orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Load MP feeder with [custom string] [orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Troubleshooting 120

Page 121 of the Lexmark MS410 user manual — Non ‑ Lexmark [supply type], see User’s Guide [33.xy]
Page 121 · click to enlarge
Page 121

Load MP feeder with [paper size] [orientation]

Try one or more of the following:

  • Load the feeder with the correct size of paper.
  • From the printer control panel, press to clear the message and continue printing.

Load MP feeder with [paper type] [paper size] [orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, press to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

  • From the printer control panel, press to clear the message.
  • Decrease the resolution setting.
  • Install additional printer memory.

Non ‑ Lexmark [supply type], see User’s Guide [33.xy]

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,

on the printer control panel simultaneously for 15 seconds to clear the message and continue printing.

Troubleshooting 121 · press and

Page 122 of the Lexmark MS410 user manual — Replace cartridge, printer region mismatch [42.xy]
Page 122 · click to enlarge
Page 122

If you do not wish to accept these risks, then remove the third‑party supply or part from your printer, and then install a genuine Lexmark supply or part.

Network error, port [x] [54]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.
  • Unplug the router, then wait for 30 seconds, and then plug it back again.
  • Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or the print server. For more information, contact customer support.

Flash memory full [52]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.
  • Delete fonts, macros, and other data stored in the flash memory. From the printer control panel, navigate to:

> Settings > > Print Settings > > Utilities Menu > > Format Flash > > Yes > • Use a larger‑capacity flash memory card.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Printer restart. Check last job.

Press on the printer control panel to clear the message and continue printing.

For more information, visit http://support.lexmark.com or contact customer support.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

Troubleshooting 122

Page 123 of the Lexmark MS410 user manual — Reinstall missing or unresponsive imaging unit [31.xy]
Page 123 · click to enlarge
Page 123

Printer and toner cartridge regions

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

  • The x and y values represent . xy in the code that appears on the printer control panel.
  • The x and y values must match for printing to continue.

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

  • Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide. • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Show 5 more labels / short text on this page
Troubleshooting 123 · Region number Region · 0 Global · 4 Latin America · 9 Invalid
Page 124 of the Lexmark MS410 user manual — Rear USB port disabled [56]
Page 124 · click to enlarge
Page 124

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Bin full. Remove paper.

Remove the paper stack from the standard bin.

Network error, standard port [54]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.
  • Unplug the router, then wait for 30 seconds, and then plug it back again.
  • Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or the print server. For more information, contact customer support.

Parallel port disabled [56]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.

Rear USB port disabled [56]

Try one or more of the following:

  • From the printer control panel, press to clear the message and continue printing.

Troubleshooting 124

Page 125 of the Lexmark MS410 user manual — The printer is not responding
Page 125 · click to enlarge
Page 125

Too many trays. Remove some. [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to the electrical outlet.

5 Turn the printer back on.

Flash memory unformatted [53]

Try one or more of the following:

  • From the printer control panel, press to stop the defragmentation and continue printing.
  • Format the flash memory device.

Solving printer problems

  • “Basic printer problems” on page 125
  • “Option problems” on page 127
  • “Paper feed problems” on page 130

Basic printer problems

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Show 5 more labels / short text on this page
Troubleshooting 125 · Action Yes No · Step 1 · Step 2 · Step 3
Page 126 of the Lexmark MS410 user manual — Too many trays. Remove some. [58]
Page 126 · click to enlarge
Page 126

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Step 5 Check if the cables connecting the printer and the computer are inserted in the correct ports.

Go to step 6. Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Turn on the switch or reset the breaker.

Go to step 7.

Make sure the electrical outlet is not turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Go to step 11. Use correct printer driver settings.

Check if you have selected the correct port settings in the printer driver.

Are the port settings correct?

Show 8 more labels / short text on this page
Troubleshooting 126 · Action Yes No · Step 4 · Step 6 · Step 7 · Step 8 · Step 9 · Step 10
Page 127 of the Lexmark MS410 user manual — Cannot detect internal option
Page 127 · click to enlarge
Page 127

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Printer display is blank

The problem is solved. Go to step 2.

Press the Sleep button on the printer control panel.

Does Ready appear on the printer display?

The problem is solved. Turn off the printer, and then contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Do Please wait and Ready appear on the printer display?

Option problems

Cannot detect internal option

Step 1 Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

The problem is solved. Go to step 2.

Does the internal option operate correctly?

Step 2 Check if the internal option is properly installed in the controller board.

Go to step 3. Connect the internal option to the controller board.

a Turn off the printer using the power switch, and then unplug the power

cord from the electrical outlet. b Make sure the internal option is installed in the appropriate connector

in the controller board. c Connect the power cord to the printer, then to a properly grounded

electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Show 8 more labels / short text on this page
Troubleshooting 127 · Action Yes No · Step 11 · Step 12 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 128 of the Lexmark MS410 user manual — Tray problems
Page 128 · click to enlarge
Page 128

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

The problem is solved. Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 22. b Resend the print job.

Does the internal option operate correctly?

Tray problems

The problem is solved. Go to step 2.

a Open the tray and do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved. Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn the

printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed.

Print a menu settings page, and then check if the tray is listed in the Installed Options list.

Is the tray listed in the menu settings page?

Show 8 more labels / short text on this page
Troubleshooting 128 · Action Yes No · Step 3 · Step 4 · Action Yes No · Step 1 · Step 2 · Step 3
Page 129 of the Lexmark MS410 user manual — Cannot detect memory card
Page 129 · click to enlarge
Page 129

Go to step 5. Manually add the tray in the printer driver.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

The problem is solved. Contact customer support.

Check if the option is selected.

a From the application you are using, select the option. For Mac OS X

version 9 users, make sure the printer is set up in Chooser. b Resend the print job.

Is the tray working?

Cannot detect memory card

Make sure the memory card is installed.

The problem is solved. Contact customer support.

a Install the memory card. For more information, see “Installing a

memory card” on page 15.

Installed Options list.

Is the card listed in the Installed Options list?

Show 5 more labels / short text on this page
Troubleshooting 129 · Action Yes No · Step 4 · Step 5 · Action Yes No
Page 130 of the Lexmark MS410 user manual — Paper jam message remains after jam is cleared
Page 130 · click to enlarge
Page 130

Paper feed problems

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see “Avoiding

jams” on page 105. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

Open front door and remove all trays.

Contact customer support.

The problem is solved.

a Clear any jammed pages.

b Press to clear the message and continue printing.

Does the paper jam message remain?

Show 6 more labels / short text on this page
Troubleshooting 130 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 131 of the Lexmark MS410 user manual — Print jobs do not print
Page 131 · click to enlarge
Page 131

Jammed pages are not reprinted

a Turn on jam recovery.

The problem is solved. Contact customer support.

1 From the printer control panel, navigate to:

> Settings > > General Settings > > Print

Recovery > > Jam Recovery > 2 Press the arrow buttons until On or Auto appears, and then press

. b Resend the pages that did not print.

Were the jammed pages reprinted?

Solving print problems

Printing problems

Print jobs do not print

The problem is solved. Go to step 2.

a From the document you are trying to print, open the Print dialog and

check if you have selected the correct printer.

Do the jobs print?

The problem is solved. Go to step 3.

a Check if the printer is plugged in and turned on, and if Ready appears

on the printer display. b Resend the print job.

Do the jobs print?

The problem is solved. Go to step 4.

If an error message appears on the printer display, then clear the message.

Do the jobs print?

Show 6 more labels / short text on this page
Troubleshooting 131 · Action Yes No · Action Yes No · Step 1 · Step 2 · Step 3
Page 132 of the Lexmark MS410 user manual — Printing slows down
Page 132 · click to enlarge
Page 132

The problem is solved. Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if the

cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved. Go to step 6.

a Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

The problem is solved. Contact customer support.

a Remove, and then reinstall the printer software. For more

information, see “Installing the printer software” on page 21.

Do the jobs print?

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.
  • The printer speed may also be reduced when the printed output resolution is set to 1,200 dpi.

Place letter‑ or A4‑size paper in the tray, and then resend the print job.

The problem is solved. Contact customer

Does the print speed increase?

support.

Show 6 more labels / short text on this page
Troubleshooting 132 · Action Yes No · Step 4 · Step 5 · Step 6 · Action Yes No
Page 133 of the Lexmark MS410 user manual — Job prints from the wrong tray or on the wrong paper
Page 133 · click to enlarge
Page 133

Print job takes longer than expected

Go to step 2. The problem is solved.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the print job.

Does the print job still take long?

Go to step 3. The problem is solved.

Disable the Page Protect feature.

From the printer control panel, navigate to:

> Settings > > General Settings > > Print Recovery >

> Page Protect > > Off >

Does the print job still take long?

Install additional printer memory.

The problem is solved.

Change the environmental settings.

From the printer control panel, navigate to:

For more information, contact customer support.

> Settings > > General Settings > > Eco‑Mode > select

Does the print job still take long?

Job prints from the wrong tray or on the wrong paper

The problem is solved. Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 3.

a From the Paper menu on the printer control panel, set the paper size

and type to match the paper loaded in the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Show 9 more labels / short text on this page
Troubleshooting 133 · Action Yes No · Step 1 · Step 2 · Step 3 · a setting > · Action Yes No · Step 1 · Step 2
Page 134 of the Lexmark MS410 user manual — Tray linking does not work
Page 134 · click to enlarge
Page 134

The problem is solved. Go to step 4.

a Depending on your operating system, open Printing Preferences or

the Print dialog, and then specify the paper type. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Contact customer support.

a Check if the trays are not linked. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Incorrect characters print

Deactivate Hex Trace mode.

Go to step 2.

Make sure the printer is not in Hex Trace mode.

Is the printer in Hex Trace mode?

Contact customer support.

The problem is solved.

a From the printer control panel, select Standard Network or

Network [x], and then set SmartSwitch to On. b Resend the print job.

Do incorrect characters print?

Tray linking does not work

a From the printer control panel, set the paper size and type in the Paper

The problem is solved. Contact customer support.

menu to match the paper loaded in the trays to be linked.

Do the trays link correctly?

Show 8 more labels / short text on this page
Troubleshooting 134 · Action Yes No · Step 3 · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 135 of the Lexmark MS410 user manual — Unexpected page breaks occur
Page 135 · click to enlarge
Page 135

Large jobs do not collate

The problem is solved. Go to step 2.

a From the Finishing menu on the printer control panel, set Collate to

(1,2,3) (1,2,3). b Resend the print job.

Did the job print and collate correctly?

The problem is solved. Go to step 3.

a From the printer software, set Collate to (1,2,3) (1,2,3).

Did the job print and collate correctly?

The problem is solved. Contact customer support.

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Did the job print and collate correctly?

Unexpected page breaks occur

The problem is solved. Go to step 2.

Adjust the print timeout settings.

a From the printer control panel, navigate to:

Settings > General Settings > Timeouts > Print Timeout b Select a higher setting and then, depending on your printer model,

select or Submit. c Resend the print job.

Did the file print correctly?

The problem is solved. Contact customer support.

a Check the original file for manual page breaks. b Resend the print job.

Did the file print correctly?

Show 8 more labels / short text on this page
Troubleshooting 135 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 136 of the Lexmark MS410 user manual — Printer is printing blank pages
Page 136 · click to enlarge
Page 136

Print quality problems

Characters have jagged or uneven edges

Go to step 2. The problem is solved.

a Print a font sample list to check if the fonts you are using are supported

by the printer.

1 From the printer control panel, navigate to:

> Reports > > Print Fonts > 2 Press the arrow buttons until PCL Fonts or PostScript

Fonts appears, and then press . b Use a font that is supported by the printer or install the font that you

want to use. For more information, contact your system support person. c Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Contact customer support.

The problem is solved.

a Use a font that is supported by the printer or install the font that you

want to use in your computer. For more information, contact your system support person. b Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Printer is printing blank pages

Show 4 more labels / short text on this page
Troubleshooting 136 · Action Yes No · Step 1 · Step 2
Page 137 of the Lexmark MS410 user manual — Clipped pages or images
Page 137 · click to enlarge
Page 137

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer still printing blank pages?

Clipped pages or images

ABCDE ABCDE ABCDE

Show 7 more labels / short text on this page
Troubleshooting 137 · Action Yes No · Step 1 · Step 2 · Step 3 · Leading edge · Trailing edge
Page 138 of the Lexmark MS410 user manual — Shadow images appear on prints
Page 138 · click to enlarge
Page 138

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the paper loaded. b Resend the print job.

Is the page or image clipped?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Do the paper size and type match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Shadow images appear on prints

ABCD ABCD ABCD ABCD

Lexmark MS410 — Shadow images appear on prints diagram (page 138)
Fig. 78 · Shadow images appear on prints
Show 8 more labels / short text on this page
Troubleshooting 138 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Leading edge · Trailing edge
Page 139 of the Lexmark MS410 user manual — Gray background on prints
Page 139 · click to enlarge
Page 139

Go to step 2. Load paper with the correct paper type and weight in the tray.

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do shadow images still appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Gray background on prints

Lexmark MS410 — Gray background on prints diagram (page 139)
Fig. 79 · Gray background on prints

a From the Quality Menu on the printer control panel, decrease the

Show 6 more labels / short text on this page
Troubleshooting 139 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 140 of the Lexmark MS410 user manual — Incorrect margins on prints
Page 140 · click to enlarge
Page 140

The problem is solved. Go to step 3.

Reinstall the imaging unit and the toner cartridge.

a Remove the toner cartridge. b Remove the imaging unit.

Did the gray background disappear from the prints?

The problem is solved. Contact customer support.

Replace the imaging unit, and then resend the print job.

Did the gray background disappear from the prints?

Incorrect margins on prints

ABCD ABCD ABCD

The problem is solved. Go to step 2.

a Move the width and length guides in the tray to the correct positions

for the paper size loaded. b Resend the print job.

Are the margins correct?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Does the paper size match the paper loaded in the tray?

Show 7 more labels / short text on this page
Troubleshooting 140 · Action Yes No · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 141 of the Lexmark MS410 user manual — Paper curl
Page 141 · click to enlarge
Page 141

The problem is solved. Contact customer support.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the paper still curled?

Go to step 5. The problem is solved.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Show 9 more labels / short text on this page
Troubleshooting 141 · Action Yes No · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 142 of the Lexmark MS410 user manual — Print irregularities
Page 142 · click to enlarge
Page 142

Print irregularities

) ) ABCDE

ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded in the tray. b Resend the print job.

Do print irregularities still appear?

Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do print irregularities still appear?

From the printer control panel, set the paper texture in the Paper menu to match the paper loaded in the tray.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do print irregularities still appear?

Show 10 more labels / short text on this page
Troubleshooting 142 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 143 of the Lexmark MS410 user manual — Print is too dark
Page 143 · click to enlarge
Page 143

Repeating defects appear on prints

Go to step 2. 1 Check if the distance between the defects equal to 80 mm (3.15 in.) 2 Take note of the distance, and then contact customer support at http://support.le xmark.com or your service representative.

Measure the distance between the defects.

Check for a distance between the defects that equals:

  • 97 mm (3.82 in.)
  • 47 mm (1.85 in.)
  • 38 mm (1.5 in.)

Is the distance between defects equal to one of the listed measurements?

Contact customer support at http://support.lexma rk.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do the repeating defects still appear?

Print is too dark

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, reduce the toner

darkness.

Is the print still too dark?

Show 6 more labels / short text on this page
Troubleshooting 143 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 144 of the Lexmark MS410 user manual — Repeating defects appear on prints
Page 144 · click to enlarge
Page 144

Go to step 3. Do one or more of the following:

a From the printer control panel, set the paper type, texture and weight

in the Paper menu to match the paper loaded in the tray. b Resend the print job.

  • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper type, texture and weight specified in the tray settings.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too dark?

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Show 7 more labels / short text on this page
Troubleshooting 144 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 145 of the Lexmark MS410 user manual — Print is too light
Page 145 · click to enlarge
Page 145

Print is too light

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, increase the toner

darkness.

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too light?

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Show 7 more labels / short text on this page
Troubleshooting 145 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 146 of the Lexmark MS410 user manual — Skewed print
Page 146 · click to enlarge
Page 146

Go to step 7. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Skewed print

) ) ABCDE

ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the tray. b Resend the print job.

Is the print still skewed?

Show 7 more labels / short text on this page
Troubleshooting 146 · Action Yes No · Step 6 · Step 7 · Action Yes No · Step 1 · Step 2
Page 147 of the Lexmark MS410 user manual — Transparency print quality is poor
Page 147 · click to enlarge
Page 147

Printer is printing solid black pages

Go to step 2. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Is the printer printing solid black pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

Contact customer support.

The problem is solved.

a Check if you are using a recommended type of transparency. b Resend the print job.

Is the print quality still poor?

Show 7 more labels / short text on this page
Troubleshooting 147 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 148 of the Lexmark MS410 user manual — Streaked horizontal lines appear on prints
Page 148 · click to enlarge
Page 148

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder from

Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked horizontal lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked horizontal lines appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do streaked horizontal lines appear on prints?

Show 7 more labels / short text on this page
Troubleshooting 148 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 149 of the Lexmark MS410 user manual — Streaked vertical lines appear on prints
Page 149 · click to enlarge
Page 149

Streaked vertical lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do streaked vertical lines appear on prints?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper texture, type, and weight in the Paper menu to match the paper loaded in the tray.

  • Specify the paper texture, type, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper texture, type, and weight specified in the tray settings.

Do the paper texture, type, and weight match the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked vertical lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked vertical lines appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 149 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 150 of the Lexmark MS410 user manual — Horizontal voids appear on prints
Page 150 · click to enlarge
Page 150
Lexmark MS410 — Horizontal voids appear on prints diagram (page 150)
Fig. 80 · Horizontal voids appear on prints

Contact customer support at http://support.lexmar k.com or your service representative.

Replace the imaging unit, and then resend the print job.

Horizontal voids appear on prints

Lexmark MS410 — Horizontal voids appear on prints diagram (page 150)
Fig. 81 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Replace the imaging unit, and then resend the print job.

Troubleshooting 150

Page 151 of the Lexmark MS410 user manual — Vertical voids appear on prints
Page 151 · click to enlarge
Page 151

Vertical voids appear on prints

Go to step 2. The problem is solved.

a Make sure your software program is using a correct fill pattern. b Resend the print job.

Do vertical voids appear on prints?

Go to step 3. The problem is solved.

a From the printer control panel, set the paper type and weight in the

Paper menu to match the paper loaded in the tray. b Resend the print job.

Do vertical voids appear on prints?

Step 3 Check if you are using a recommended type of paper.

Go to step 4. The problem is solved.

a Load the indicated tray or feeder with a recommended type of paper. b Resend the print job.

Do vertical voids appear on prints?

Contact customer support.

The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Show 7 more labels / short text on this page
Troubleshooting 151 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 4
Page 152 of the Lexmark MS410 user manual — Uneven print density
Page 152 · click to enlarge
Page 152

Toner specks appear on prints

Lexmark MS410 — Toner specks appear on prints diagram (page 152)
Fig. 82 · Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Toner rubs off

Lexmark MS410 — Toner rubs off diagram (page 152)
Fig. 83 · Toner rubs off

Step 1 From the Paper menu on the printer control panel, check the paper type and weight.

Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

Do the paper type and texture match the paper loaded in the tray?

Step 2 Check if you are printing on paper with texture or rough finishes.

From the Paper menu on the printer control panel, set the paper texture.

Uneven print density

Lexmark MS410 — Uneven print density diagram (page 152)
Fig. 84 · Uneven print density

Replace the imaging unit, and then resend the print job.

Troubleshooting 152

Page 153 of the Lexmark MS410 user manual — Embedded Web Server does not open
Page 153 · click to enlarge
Page 153

Embedded Web Server does not open

The problem is solved. Go to step 2.

a Turn on the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

The problem is solved. Go to step 3.

Make sure the printer IP address is correct.

a View the printer IP address:

  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Does the Embedded Web Server open?

The problem is solved. Go to step 4.

Check if the network is working.

a Print a network setup page. b Check the first section of the network setup page and confirm that the

status is Connected.

Does the Embedded Web Server open?

The problem is solved. Go to step 5.

Check if the cable connections to the printer and print server are secure.

a Connect the cables properly. For more information, see the setup

documentation that came with the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

Show 6 more labels / short text on this page
Troubleshooting 153 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 154 of the Lexmark MS410 user manual — Contacting customer support
Page 154 · click to enlarge
Page 154

The problem is solved. Contact your system support person.

Temporarily disable the Web proxy servers.

Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server.

Does the Embedded Web Server open?

Contacting customer support

When you contact customer support, describe the problem you are experiencing, the message on the printer display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover or at the back of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Troubleshooting 154 · Action Yes No · Step 5

Page 155 of the Lexmark MS410 user manual — GOVERNMENT END USERS
Page 155 · click to enlarge
Page 155

Notices

Product information

Product name:

Machine type:

Model(s):

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2012 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

Lexmark MS410d, MS410dn · 420, 430 · September 2012

Page 156 of the Lexmark MS410 user manual — Industry Canada compliance statement
Page 156 · click to enlarge
Page 156

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Page 157 of the Lexmark MS410 user manual — Product disposal
Page 157 · click to enlarge
Page 157

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Modular component notice

This product may contain the following modular component(s):

Lexmark Regulatory Type/Model LEX-M01-005; FCC ID:IYLLEXM01005; IC:2376A-M01005

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Printing 54 dBA · Ready N/A

Page 158 of the Lexmark MS410 user manual — Laser advisory label
Page 158 · click to enlarge
Page 158

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature 16 to 32°C (60 to 90°F)

Shipping and storage temperature ‑20 to 40°C (‑4 to 104°F)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 159 of the Lexmark MS410 user manual — 0.0 W
Page 159 · click to enlarge
Page 159

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 560 W

Copy The product is generating hard‑copy output from hard‑copy original documents. NA

Scan The product is scanning hard‑copy documents. NA

Ready The product is waiting for a print job. 8 W

Sleep Mode The product is in a high‑level energy‑saving mode. 5 W

Hibernate The product is in a low‑level energy‑saving mode. 0.5 W

Off The product is plugged into an electrical outlet, but the power switch is turned off.

0.0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Page 160 of the Lexmark MS410 user manual — European Community (EC) directives conformity
Page 160 · click to enlarge
Page 160

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and Switzerland

Factory default value for this product in EU countries or regions and Switzerland 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium

Disabled

Page 161 of the Lexmark MS410 user manual — Industry Canada (Canada)
Page 161 · click to enlarge
Page 161

Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

Page 162 of the Lexmark MS410 user manual — RO SE SI SK TR UK
Page 162 · click to enlarge
Page 162

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

Page 163 of the Lexmark MS410 user manual — Notice to users in the European Union
Page 163 · click to enlarge
Page 163

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Page 164 of the Lexmark MS410 user manual — Limited warranty service
Page 164 · click to enlarge
Page 164

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS,

LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Page 165 of the Lexmark MS410 user manual — Limitation of liability
Page 165 · click to enlarge
Page 165

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES.

Page 166 of the Lexmark MS410 user manual — Patent acknowledgment
Page 166 · click to enlarge
Page 166

This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 168 of the Lexmark MS410 user manual — Table of contents
Page 168 · click to enlarge
Page 168

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 169 of the Lexmark MS410 user manual — Table of contents
Page 169 · click to enlarge
Page 169

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 170 of the Lexmark MS410 user manual — Table of contents
Page 170 · click to enlarge
Page 170

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 171 of the Lexmark MS410 user manual — Table of contents
Page 171 · click to enlarge
Page 171

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Page 172 of the Lexmark MS410 user manual — Table of contents
Page 172 · click to enlarge
Page 172

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the colors of the Sleep button and indicator lightsp.12Using the Embedded Web Serverp.12Using the Local Printer Settings Utilityp.13Additional printer setupp.14Installing internal optionsp.14Available internal optionsp.14Accessing the controller boardp.14Installing a memory cardp.15Installing an optional cardp.17Installing hardware optionsp.19Installing optional traysp.19Attaching cablesp.20Setting up the printer softwarep.21Installing the printer softwarep.21Installing the Local Printer Settings Utilityp.22Updating available options in the printer driverp.22Networkingp.24Preparing to set up the printer on an Ethernet networkp.24Installing the printer on an Ethernet networkp.24Preparing to set up the printer on a wireless networkp.26Connecting the printer to a wireless network using Wi-Fi Protected Setupp.27Connecting the printer to a wireless network using the printer softwarep.27Using the Wireless Setup Utility (Windows only)p.27Using the Wireless Setup Assistant (Macintosh only)p.28Connecting the printer to a wireless network using the Embedded Web Serverp.29Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.30Loading paper and specialty mediap.31Setting the paper size and typep.31Configuring Universal paper settingsp.31Using the standard bin and paper stopp.32Loading traysp.32Loading the multipurpose feederp.37Linking and unlinking traysp.40Linking and unlinking traysp.40Configuring a custom paper type namep.41Configuring a custom paper typep.41Assigning a custom paper typep.42Paper and specialty media guidep.43Paper guidelinesp.43Paper characteristicsp.43Unacceptable paperp.44Selecting paperp.44Selecting preprinted forms and letterheadp.44Using recycled paper and other office papersp.45Using specialty mediap.46Tips on using card stockp.46Tips on using envelopesp.47Tips on using labelsp.47Tips on using letterheadp.48Tips on using transparenciesp.48Storing paperp.48Supported paper sizes, types, and weightsp.49Supported paper sizesp.49Supported paper types and weightsp.50Printingp.52Printing a documentp.52Printing a documentp.52Adjusting toner darknessp.52Printing information pagesp.53Printing a font sample listp.53Canceling a print jobp.53Canceling a print job from the printer control panelp.53Canceling a print job from the computerp.53Understanding the printer menusp.55Menus listp.55Paper menup.55Default Source menup.55Paper Size/Type menup.56Configure MP menup.59Substitute Size menup.59Paper Texture menup.59Paper Weight menup.61Paper Loading menup.62Custom Types menup.63Universal Setup menup.64Reports menup.64Reports menup.64Network/Ports menup.65Active NIC menup.65Standard Network or Network [x] menup.65Reports menup.66Network Card menup.67TCP/IP menup.67IPv6 menup.68Wireless menup.69AppleTalk menup.69Standard USB menup.70SMTP Setup menup.71Security menup.72Security Audit Log menup.72Set Date and Time menup.73Settings menup.74General Settings menup.74Print Settingsp.77Setup menup.77Finishing menup.79Quality menup.80Utilities menup.81XPS menup.82PostScript menup.82PCL Emul menup.82Saving money and the environmentp.85Saving paper and tonerp.85Using recycled paperp.85Conserving suppliesp.85Saving energyp.86Using Eco-Modep.86Using Hibernate modep.86Adjusting Sleep modep.87Setting Hibernate Timeoutp.88Using Schedule Power Modesp.88Recyclingp.89Recycling Lexmark productsp.89Recycling Lexmark packagingp.89Returning Lexmark cartridges for reuse or recyclingp.89Securing the printerp.90Using the security lock featurep.90Statement of Volatilityp.90Erasing volatile memoryp.91Erasing non-volatile memoryp.91Finding printer security informationp.91Maintaining the printerp.92Cleaning the printerp.92Cleaning the printerp.92Checking the status of parts and suppliesp.92Checking the status of parts and suppliesp.92Estimated number of remaining pagesp.93Ordering suppliesp.93Using genuine Lexmark parts and suppliesp.93Ordering toner cartridgesp.93Ordering an imaging unitp.95Storing suppliesp.95Replacing suppliesp.96Replacing the toner cartridgep.96Replacing the imaging unitp.97Moving the printerp.99Before moving the printerp.99Moving the printer to another locationp.100Shipping the printerp.100Managing the printerp.101Finding advanced networking and administrator informationp.101Checking the virtual displayp.101Viewing reportsp.101Configuring supply notifications from the Embedded Web Serverp.101Modifying confidential print settingsp.102Copying printer settings to other printersp.103Restoring factory default settingsp.103Creating a printer control panel PINp.103Clearing jamsp.105Avoiding jamsp.105Understanding jam messages and locationsp.106Jam, front door [20y.xx]p.108Jam, rear door [20y.xx]p.111Jam, standard bin [20y.xx]p.112Jam, pull tray 1. Push down blue flap. [23y.xx]p.113Jam, tray [x] [24y.xx]p.114Jam, MP feeder [250.xx]p.115Troubleshootingp.116Understanding the printer messagesp.116Cartridge, imaging unit mismatch [41.xy]p.116Cartridge nearly low [88.xy]p.116Cartridge very low, [x] estimated pages remain [88.xy]p.116Cartridge low [88.xy]p.116Imaging unit nearly low [84.xy]p.116Imaging unit very low, [x] estimated pages remain [84.xy]p.116Imaging unit low [84.xy]p.117Change [paper source] to [custom type name]. Load [orientation].p.117Change [paper source] to [custom string]. Load [orientation].p.117Change [paper source] to [paper size]. Load [orientation].p.117Change [paper source] to [paper type] [paper size]. Load [orientation].p.117Close front doorp.117Complex page may misprint [39]p.118Defective flash memory [51]p.118Paper too short [34]p.118Insert tray [x]p.118Memory low, no Resource Save [35]p.118Cannot collate large document [37]p.119Cannot defrag flash memory [37]p.119Load [paper source] with [custom type name] [orientation]p.119Load [paper source] with [custom string] [orientation]p.119Load [paper source] with [paper size] [orientation]p.120Load [paper source] with [paper type] [paper size] [orientation]p.120Load MP feeder with [custom type name] [orientation]p.120Load MP feeder with [custom string] [orientation]p.120Load MP feeder with [paper size] [orientation]p.121Load MP feeder with [paper type] [paper size] [orientation]p.121Memory full [38]p.121Non-Lexmark [supply type], see User’s Guide [33.xy]p.121Network error, port [x] [54]p.122Flash memory full [52]p.122Replace cartridge, 0 estimated pages remain [88.xy]p.122Printer restart. Check last job.p.122Replace cartridge, printer region mismatch [42.xy]p.122Replace imaging unit, 0 estimated pages remain [84.xy]p.123Reinstall missing or unresponsive cartridge [31.xy]p.123Reinstall missing or unresponsive imaging unit [31.xy]p.123Replace unsupported cartridge [32.xy]p.124Replace unsupported imaging unit [32.xy]p.124Bin full. Remove paper.p.124Network error, standard port [54]p.124Parallel port disabled [56]p.124Rear USB port disabled [56]p.124Too many trays. Remove some. [58]p.125Flash memory unformatted [53]p.125Solving printer problemsp.125Basic printer problemsp.125The printer is not respondingp.125Printer display is blankp.127Option problemsp.127Cannot detect internal optionp.127Tray problemsp.128Cannot detect memory cardp.129Paper feed problemsp.130Paper frequently jamsp.130Paper jam message remains after jam is clearedp.130Jammed pages are not reprintedp.131Solving print problemsp.131Printing problemsp.131Print jobs do not printp.131Printing slows downp.132Print job takes longer than expectedp.133Job prints from the wrong tray or on the wrong paperp.133Incorrect characters printp.134Tray linking does not workp.134Large jobs do not collatep.135Unexpected page breaks occurp.135Print quality problemsp.136Characters have jagged or uneven edgesp.136Printer is printing blank pagesp.136Clipped pages or imagesp.137Shadow images appear on printsp.138Gray background on printsp.139Incorrect margins on printsp.140Paper curlp.141Print irregularitiesp.142Repeating defects appear on printsp.143Print is too darkp.143Print is too lightp.145Skewed printp.146Printer is printing solid black pagesp.147Transparency print quality is poorp.147Streaked horizontal lines appear on printsp.148Streaked vertical lines appear on printsp.149Horizontal voids appear on printsp.150Vertical voids appear on printsp.151Toner specks appear on printsp.152Toner rubs offp.152Uneven print densityp.152Embedded Web Server does not openp.153Contacting customer supportp.154Noticesp.155Product informationp.155Edition noticep.155GOVERNMENT END USERSp.155Trademarksp.156Federal Communications Commission (FCC) compliance information statementp.156Modular component noticep.157Licensing noticesp.157Noise emission levelsp.157Waste from Electrical and Electronic Equipment (WEEE) directivep.157Product disposalp.157Static sensitivity noticep.158ENERGY STARp.158Temperature informationp.158Laser noticep.158Laser advisory labelp.158Power consumptionp.159Product power consumptionp.159Sleep Modep.160Hibernate Modep.160Off modep.160Total energy usagep.160European Community (EC) directives conformityp.160Regulatory notices for wireless productsp.161Exposure to radio frequency radiationp.161Industry Canada (Canada)p.161Notice to users in the European Unionp.162STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.164Patent acknowledgmentp.166Indexp.167
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark MS410

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark MS410

Be the first to ask — other owners or our team will answer.

Original document

Lexmark MS410 manual PDF

172 pages·5.5 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…