EN
Lexmark logo
Official user manual

Lexmark MS310DN

202 pages·5.6 MB·Printer·PDF·ENDEFRITNLJA
Lexmark MS310DN
Table of Contents 256 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Page 1 of the Lexmark MS310DN user manual — May 2013 www.lexmark.com
Page 1 · click to enlarge
Page 1

MS310 Series

User's Guide

May 2013 www.lexmark.com

Machine type(s):

Model(s):

220, 230

Page 2 of the Lexmark MS310DN user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Page 5 of the Lexmark MS310DN user manual — Safety information
Page 5 · click to enlarge
Page 5

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

Safety information 5

Page 6 of the Lexmark MS310DN user manual — Safety information
Page 6 · click to enlarge
Page 6

SAVE THESE INSTRUCTIONS.

Safety information 6

Page 7 of the Lexmark MS310DN user manual — Learning about the printer
Page 7 · click to enlarge
Page 7

Learning about the printer 7

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides may be available on the Software and Documentation CD. For more information, visit http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then navigate to: Documentation > User’s Guide and other publications > Networking Guide Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 8 of the Lexmark MS310DN user manual — Selecting a location for the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations.
Ambient temperature16°C to 32°C (60°F to 90°F) Storage temperature‑20 to 40°C (‑4 to 104°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 9 of the Lexmark MS310DN user manual — Printer configurations
Page 9 · click to enlarge
Page 9

Learning about the printer 9

Lexmark MS310DN — Printer configurations diagram (page 9)
Fig. 1 · Printer configurations
1Right side305 mm (12 in.) 2Front510 mm (20 in.) 3Left side205 mm (8 in.) 4Rear205 mm (8 in.) 5Top305 mm (12 in.)

Printer configurations

You can configure your printer by adding one optional 250‑ or 550‑sheet tray. For instructions on installing the optional tray, see “Installing optional trays” on page 17.

Page 10 of the Lexmark MS310DN user manual — Printer configurations
Page 10 · click to enlarge
Page 10

Learning about the printer 10

Lexmark MS310DN — Printer configurations diagram (page 10)
Fig. 2 · Printer configurations
Lexmark MS310DN — Printer configurations diagram (page 10)
Fig. 3 · Printer configurations

1 Printer control panel

2Paper stop 3Standard bin 4Front door release button 5Controller board access door 6Standard 250‑sheet tray 7Optional 250‑ or 550‑sheet tray 850‑sheet multipurpose feeder

9 Front door

Page 11 of the Lexmark MS310DN user manual — Using the printer control panel
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Using the printer control panel

1 2 3 4 5 6

Lexmark MS310DN — Using the printer control panel diagram (page 11)
Fig. 4 · Using the printer control panel
Lexmark MS310DN — Using the printer control panel diagram (page 11)
Fig. 5 · Using the printer control panel
Light or buttonColorDescription 1Error lightYellowAn error has occurred. 2Paper jam lightYellowA paper jam has occurred. 3Load or remove paper lightYellowPaper must be loaded in the tray or removed from the bin. 4Toner low or replace imaging unit lightYellowThe toner cartridge is low on toner, or the imaging unit needs to be replaced. 5Ready or data lightGreenThe printer is in Ready state. 6Sleep button and lightAmberUse this to enable Sleep mode or Hibernate mode. 7Start button and lightGreenUse this to initiate a print job.
Page 12 of the Lexmark MS310DN user manual — Understanding the printer control panel light sequences
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Lexmark MS310DN — Understanding the printer control panel light sequences diagram (page 12)
Fig. 6 · Understanding the printer control panel light sequen…
Light or buttonColor Description 8Stop or cancel buttonRed Use this to cancel a print job.

Understanding the printer control panel light sequences

The printer control panel lights can mean different things, depending on the light sequence. The lights can be on, off, blinking, or blinking slowly, indicating a printer status, a warning, or an error. Some errors have the same light sequence. The following table shows the appearances of the lights.

Lexmark MS310DN — Understanding the printer control panel light sequences diagram (page 12)
Fig. 7 · Understanding the printer control panel light sequen…

If the printer control panel light sequence matches a light sequence in the following table, then see the message in the same row.

Lexmark MS310DN — Understanding the printer control panel light sequences diagram (page 12)
Fig. 8 · Understanding the printer control panel light sequen…
Page 13 of the Lexmark MS310DN user manual — Understanding the printer control panel light sequences
Page 13 · click to enlarge
Page 13

Learning about the printer 13

Lexmark MS310DN — Understanding the printer control panel light sequences diagram (page 13)
Fig. 9 · Understanding the printer control panel light sequen…

The printer control panel lights blink one at a time from left to right repeatedly.

If the printer control panel light sequence matches a light sequence in the “Primary light sequence” column of the

following table, then press twice quickly on the printer control panel. Search for a matching light sequence in the “Supplemental light sequence” column, and then see the message in the same row.

Page 14 of the Lexmark MS310DN user manual — Understanding the printer control panel light sequences
Page 14 · click to enlarge
Page 14

Learning about the printer 14

Lexmark MS310DN — Understanding the printer control panel light sequences diagram (page 14)
Fig. 10 · Understanding the printer control panel light sequen…
Page 15 of the Lexmark MS310DN user manual — Using the Local Printer Settings Utility
Page 15 · click to enlarge
Page 15

Learning about the printer 15

Lexmark MS310DN — Using the Embedded Web Server diagram (page 15)
Fig. 11 · Using the Embedded Web Server

Using the Embedded Web Server

Use the Embedded Web Server to:

  • Check the status of the printer supplies.
  • Configure supply notifications.
  • Configure printer settings.
  • Configure network settings.
  • View reports.

To access the Embedded Web Server for your printer:

1 Obtain the printer IP address by printing a network setup page or menu settings page, and then finding the TCP/IP section.

For more information, see “Printing a menu settings and network setup page” on page 28.

  • An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Using the Local Printer Settings Utility

The Local Printer Settings Utility lets you change and save settings for a printer that is connected to a computer locally through a USB or parallel cable.

Page 16 of the Lexmark MS310DN user manual — In Windows 7 or earlier
Page 16 · click to enlarge
Page 16

Learning about the printer 16

To download and install the Local Printer Settings Utility, see “Installing the Local Printer Settings Utility” on page 20.

To access the Local Printer Settings Utility:

In Windows 8

From the Search charm, type local printer settings utility, and then navigate to:

Apps list > Local Printer Settings Utility

In Windows 7 or earlier

or Start.

2 Click All Programs or Programs > Lexmark > Local Printer Settings Utility.

To save your settings, click Actions > Apply Settings.

You can also distribute your settings to other printers by saving the settings in a command file. To save your settings in a command file, click Actions > Save As Command File.

1 Click

Page 17 of the Lexmark MS310DN user manual — Installing optional trays
Page 17 · click to enlarge
Page 17

Additional printer setup 17

Additional printer setup

Installing hardware options

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Lexmark MS310DN — Installing optional trays diagram (page 17)
Fig. 12 · Installing optional trays
Lexmark MS310DN — Installing optional trays diagram (page 17)
Fig. 13 · Installing optional trays

2 Unpack the tray, and then remove any packing material.

3 Remove the tray from the base.

Lexmark MS310DN — Installing optional trays diagram (page 17)
Fig. 14 · Installing optional trays

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

Page 18 of the Lexmark MS310DN user manual — Attaching cables
Page 18 · click to enlarge
Page 18

Additional printer setup 18

7 Align the printer with the tray, and then slowly lower the printer into place.

Lexmark MS310DN — Attaching cables diagram (page 18)
Fig. 15 · Attaching cables

8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Attaching cables

Connect the printer to the computer using a USB or parallel cable, or to the network using an Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate parallel cable with the parallel port
  • The appropriate Ethernet cable with the Ethernet port
Page 19 of the Lexmark MS310DN user manual — Installing the printer software
Page 19 · click to enlarge
Page 19

Additional printer setup 19

Lexmark MS310DN — Setting up the printer software diagram (page 19)
Fig. 16 · Setting up the printer software

1 USB port* Attach an optional wireless network adapter.

2 USB printer port Connect the printer to a computer.

3 Ethernet port* Connect the printer to a network.

4 Parallel port* Connect the printer to a computer.

5 Power switch Turn on or turn off the printer.

6 Printer power cord socket Connect the printer to an electrical outlet.

7 Security slot Attach a lock that will secure the printer in place.

* These ports are available only in select printer models.

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.

Use the To

Page 20 of the Lexmark MS310DN user manual — Installing the Local Printer Settings Utility
Page 20 · click to enlarge
Page 20

Additional printer setup 20

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

2 Do either of the following: • If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear. If the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop. • If you are using the downloaded software installer from the Web, then double‑click the installer that you have saved in your computer. Wait for the Select Installation Type dialog to appear, and then click Install.

3 Click Install, and then follow the instructions on the computer screen.

Installing the Local Printer Settings Utility

1 Visit http://support.lexmark.com, and then download the software.

2 Double‑click the software installer package.

3 Select an installation type, and then click Install.

4 Click Install to start the installation.

5 Click Agree to accept the license agreement.

6 Click Continue, and then follow the instructions on the computer screen.

  • Use the Local Printer Settings Utility to change the toner darkness, power saver, and paper size settings for all print jobs. Use the printer software to change these settings for individual print jobs.
  • This utility is supported only in select printer models.

a Click

Page 21 of the Lexmark MS310DN user manual — For Macintosh users
Page 21 · click to enlarge
Page 21

Additional printer setup 21

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

In Windows 8 · a Click

Page 22 of the Lexmark MS310DN user manual — For Windows users
Page 22 · click to enlarge
Page 22

Additional printer setup 22

Networking

  • Purchase a MarkNet TM N8352 wireless network adapter first before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

2 Do either of the following: • If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear. If the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 8

Page 23 of the Lexmark MS310DN user manual — For Macintosh users
Page 23 · click to enlarge
Page 23

Additional printer setup 23

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when installation is complete.

4 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner.

a Click

Page 24 of the Lexmark MS310DN user manual — Preparing to set up the printer on a wireless network
Page 24 · click to enlarge
Page 24

Additional printer setup 24

d Click the IP tab. e Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly.
  • Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. or – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

Page 25 of the Lexmark MS310DN user manual — Using the Wireless Setup Utility (Windows only)
Page 25 · click to enlarge
Page 25

Additional printer setup 25

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. – To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came

with the access point, see the Web page associated with the access point, or consult your system support person.

Connecting the printer to a wireless network using the Wi‑Fi Protected Setup PIN

The printer supports only the personal identification number (PIN) method of connecting to a wireless network using Wi‑Fi Protected Setup (WPS) methods.

1 Print a network setup page or menu settings page. For more information, see “Printing a menu settings and network setup page” on page 28.

2 Locate the WPS PIN in the Wireless section.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit WPS PIN, and then save the setting.

Connecting the printer to a wireless network using the printer software

  • Make sure your printer is turned on.
  • Make sure a wireless network adapter installed in your printer is attached and working properly. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter.

Using the Wireless Setup Utility (Windows only)

The Wireless Setup Utility lets you:

  • Configure the printer to join an existing wireless network.
  • Add a printer to an existing ad hoc network.
  • Change the wireless settings after installation.
  • Install the printer on additional network computers.
Page 26 of the Lexmark MS310DN user manual — Connecting the printer to a wireless network using the Wi-Fi Protected Setup PIN
Page 26 · click to enlarge
Page 26

Additional printer setup 26

Installing the Wireless Setup Utility

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

3 Follow the instructions on the computer screen.

Launching the Wireless Setup Utility

  • Make sure the printer is turned on.
  • Make sure a wireless network adapter is installed in your printer and is working properly.

1 Run the utility.

From the Search charm, type printer home, and then navigate to:

Apps list > Printer Home > Settings > Wireless Setup Utility

In Windows 7 or earlier

or Start. b Click All Programs or Programs, and then select the printer program folder from the list.

c Select your printer, and then navigate to: Printer Home > Settings > Wireless Setup Utility

2 Follow the instructions on the computer screen.

Show 4 more labels / short text on this page
In Windows 8 · a Click · In Windows 8 · a Click
Page 27 of the Lexmark MS310DN user manual — Connecting the printer to a wireless network using the Embedded Web Server
Page 27 · click to enlarge
Page 27

Additional printer setup 27

Using the Wireless Setup Assistant (Macintosh only)

The Wireless Setup Assistant lets you:

  • Configure the printer to join an existing wireless network.
  • Add a printer to an existing ad hoc network.
  • Change the wireless settings after installation.
  • Install the printer on additional network computers.

Installing the Wireless Setup Assistant

1 Go to the Lexmark Web site at http://support.lexmark.com.

2 Download the latest Wireless Setup Assistant application.

3 Double‑click the downloaded software installer package.

4 Follow the instructions on the computer screen.

Launching the Wireless Setup Assistant

  • Make sure the printer is turned on.
  • Make sure a wireless network adapter installed in your printer is attached and working properly.

1 From the Finder, navigate to:

Applications > select your printer folder

2 Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.

?.

Connecting the printer to a wireless network using the Embedded Web Server

  • Make sure your printer is connected temporarily to an Ethernet network.
  • Make sure a wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with your wireless network adapter.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

Page 28 of the Lexmark MS310DN user manual — Printing a menu settings and network setup page
Page 28 · click to enlarge
Page 28

Additional printer setup 28

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page again. Then in the Network Card [x] section, see if the status is “Connected”.

Printing a menu settings and network setup page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly. The network setup page prints at the same time, containing the current network settings of the printer and levels of supplies.

From the printer control panel, press for at least four seconds.

  • If you have not changed any menu settings, then the menu settings page lists all the factory default settings. When you select and save other settings from the menus, they replace the factory default settings as user default settings.
  • Make sure to check the first section of the network setup page to see if the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be defective. Contact your system support person for a solution, and then print another network setup page.
Page 29 of the Lexmark MS310DN user manual — Using the printer settings on the computer
Page 29 · click to enlarge
Page 29

Loading paper and specialty media 29

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 92 and “Storing paper” on page 46.

Setting the paper size and type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

Using the printer settings on the computer

Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

Configuring Universal paper settings

The Universal paper size setting is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The largest supported Universal size is 216 x 355.6 mm (8.5 x 14 inches).
  • The smallest Universal size supported in the multipurpose feeder is 76 x 127 mm (3 x 5 inches). The smallest Universal size supported in the optional tray is 183 x 210 mm (7.2 x 8.3 inches).

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Paper Menu > Universal Setup.

3 Select the unit of measure, or click Portrait Width or Portrait Height.

4 Change the setting, and then click Submit.

Using the printer settings on the computer

1 Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

2 Select the tray containing the Universal paper size, and then select Universal as the paper size.

Page 30 of the Lexmark MS310DN user manual — Loading trays
Page 30 · click to enlarge
Page 30

Loading paper and specialty media 30

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 75‑g/m2 (20‑lb) paper. It collects prints facedown. The standard bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.

To open the paper stop, pull it so that it flips forward.

Lexmark MS310DN — Using the standard bin and paper stop diagram (page 30)
Fig. 17 · Using the standard bin and paper stop

Loading trays

1 Pull out the tray completely.

Page 31 of the Lexmark MS310DN user manual — Using the standard bin and paper stop
Page 31 · click to enlarge
Page 31

Loading paper and specialty media 31

Lexmark MS310DN — Using the standard bin and paper stop diagram (page 31)
Fig. 18 · Using the standard bin and paper stop
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 31)
Fig. 19 · Using the standard bin and paper stop

Busy · ‑ Blinking

Page 32 of the Lexmark MS310DN user manual — A6 A5
Page 32 · click to enlarge
Page 32

Loading paper and specialty media 32

2 Squeeze and then slide the width guide tab to the correct position for the size of the paper you are loading.

Lexmark MS310DN — Using the standard bin and paper stop diagram (page 32)
Fig. 20 · Using the standard bin and paper stop
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 32)
Fig. 21 · Using the standard bin and paper stop

A6 A5

LGL

B5

EXEC

A5

3 Squeeze and then slide the length guide tab to the correct position for the size of the paper you are loading.

Lexmark MS310DN — A6 A5 diagram (page 32)
Fig. 22
Lexmark MS310DN — A6 A5 diagram (page 32)
Fig. 23

A6 A5

LGL

B5

EXEC

A5

Page 33 of the Lexmark MS310DN user manual — A4 A5 B5 A6
Page 33 · click to enlarge
Page 33

Loading paper and specialty media 33

  • For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward to accommodate their length.
  • When loading legal ‑ size paper, the length guide extends beyond the base, leaving the paper exposed to dust. To protect the paper from dust, you can purchase a dust cover separately. For more information, contact customer support.
  • If you are loading A6 ‑ size paper in the standard tray, then squeeze and slide the length guide tab toward the center of the tray to the A6 ‑ size position.
  • Make sure the width and length guides are aligned with the paper size indicators on the bottom of the tray.
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 33)
Fig. 24 · Using the standard bin and paper stop
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 33)
Fig. 25 · Using the standard bin and paper stop
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 33)
Fig. 26 · Using the standard bin and paper stop

A4 A5 B5 A6

LTR/LGL EXEC

A5

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS310DN — A4 A5 B5 A6 diagram (page 33)
Fig. 27

5 Load the paper stack.

Page 34 of the Lexmark MS310DN user manual — Using the standard bin and paper stop
Page 34 · click to enlarge
Page 34

Loading paper and specialty media 34

Lexmark MS310DN — Using the standard bin and paper stop diagram (page 34)
Fig. 28 · Using the standard bin and paper stop
Lexmark MS310DN — Using the standard bin and paper stop diagram (page 34)
Fig. 29 · Using the standard bin and paper stop
  • Load recycled or preprinted paper with the printable side facedown.
  • Load prepunched paper with the holes on the top edge toward the front of the tray.
  • Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two ‑ sided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray.

6 Insert the tray.

Lexmark MS310DN — Using the standard bin and paper stop diagram (page 34)
Fig. 30 · Using the standard bin and paper stop

7 From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • If the printer is not connected to a network, then access the Paper menu using Local Printer Settings Utility or Printer Settings, depending on your operating system.
  • Set the correct paper size and type to avoid paper jams and print quality problems.
Page 35 of the Lexmark MS310DN user manual — Loading the multipurpose feeder
Page 35 · click to enlarge
Page 35

Loading paper and specialty media 35

Loading the multipurpose feeder

Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock, transparencies, paper labels, and envelopes. You can also use it for single‑page print jobs on letterhead.

1 Open the multipurpose feeder.

Lexmark MS310DN — Loading the multipurpose feeder diagram (page 35)
Fig. 31 · Loading the multipurpose feeder
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 35)
Fig. 32 · Loading the multipurpose feeder

a Pull the multipurpose feeder extender.

Lexmark MS310DN — Loading the multipurpose feeder diagram (page 35)
Fig. 33 · Loading the multipurpose feeder

b Pull the extender gently so that the multipurpose feeder is fully extended and open.

Lexmark MS310DN — Loading the multipurpose feeder diagram (page 35)
Fig. 34 · Loading the multipurpose feeder
Page 36 of the Lexmark MS310DN user manual — Loading the multipurpose feeder
Page 36 · click to enlarge
Page 36

Loading paper and specialty media 36

2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.

Lexmark MS310DN — Loading the multipurpose feeder diagram (page 36)
Fig. 35 · Loading the multipurpose feeder
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 36)
Fig. 36 · Loading the multipurpose feeder

3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS310DN — Loading the multipurpose feeder diagram (page 36)
Fig. 37 · Loading the multipurpose feeder
  • Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
  • Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

4 Load the paper or specialty media.

  • Do not force paper into the multipurpose feeder. Overfilling may cause paper jams.
Page 37 of the Lexmark MS310DN user manual — Loading the multipurpose feeder
Page 37 · click to enlarge
Page 37

Loading paper and specialty media 37

  • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides.
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 37)
Fig. 38 · Loading the multipurpose feeder
  • Load paper, transparencies, and card stock with the recommended printable side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging the transparencies came in.
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 37)
Fig. 39 · Loading the multipurpose feeder
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 37)
Fig. 40 · Loading the multipurpose feeder
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 37)
Fig. 41 · Loading the multipurpose feeder
Lexmark MS310DN — Loading the multipurpose feeder diagram (page 37)
Fig. 42 · Loading the multipurpose feeder
Page 38 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 38 · click to enlarge
Page 38

Loading paper and specialty media 38

  • Load letterhead faceup with the top edge entering the printer first. For two ‑ sided (duplex) printing, load letterhead facedown with the bottom edge of the sheet entering the printer first.
  • Load envelopes with the flap on the left side facedown.

5 From the Embedded Web Server or from your computer, set the paper size and paper type in the Paper menu to match the paper loaded in the multipurpose feeder.

Linking and unlinking trays

When the paper size and paper type for any trays are the same, the printer will link those trays. When one linked tray becomes empty, paper will feed from the next linked tray. It is recommended to give all unique paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in will not automatically link.

Linking and unlinking trays

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Page 39 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 39 · click to enlarge
Page 39

Loading paper and specialty media 39

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 From the Tray Configuration section, select a tray, and then change the paper size and type settings.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

Configuring a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a custom paper type.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Custom menu using the Local Printer Settings Utility or Printer Settings.

Assigning a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Page 40 of the Lexmark MS310DN user manual — Using the printer settings on the computer
Page 40 · click to enlarge
Page 40

Loading paper and specialty media 40

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

3 From the Tray Configuration section, select a paper source, and then select a custom paper type under the paper type column.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings.

Page 41 of the Lexmark MS310DN user manual — Moisture content
Page 41 · click to enlarge
Page 41

Paper and specialty media guide 41

Paper and specialty media guide

Additional information for printing on specialty media may be found in the Cardstock and Label Guide available at http://support.lexmark.com.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer trays can automatically feed paper weights up to 120‑g/m2 (32‑lb) bond grain long paper. The multipurpose feeder can automatically feed paper weights up to 163‑g/m2 (43‑lb) bond grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75‑g/m2 (20‑lb) bond grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches), we recommended to use 90 g/m2

(24 lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, then toner cannot fuse to it properly. If paper is too smooth, then it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time to several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Page 42 of the Lexmark MS310DN user manual — Selecting preprinted forms and letterhead
Page 42 · click to enlarge
Page 42

Paper and specialty media guide 42

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–90‑g/m2 (16–24‑lb) bond paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically ‑ treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater or lesser than +/ ‑ 2.5 mm (+/ ‑ 0.10 inch), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms:
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough ‑ edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple ‑ part forms or documents

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 90 g/m 2 (16 to 24 lb) weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Page 43 of the Lexmark MS310DN user manual — Using recycled paper and other office papers
Page 43 · click to enlarge
Page 43

Paper and specialty media guide 43

  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Page 44 of the Lexmark MS310DN user manual — Tips on using card stock
Page 44 · click to enlarge
Page 44

Paper and specialty media guide 44

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or the Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Using specialty media

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • Make sure the Paper Type is Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure that the card stock can withstand temperatures up to 240°C (464°F) without releasing hazardous emissions.
Page 45 of the Lexmark MS310DN user manual — Tips on using labels
Page 45 · click to enlarge
Page 45

Paper and specialty media guide 45

  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 230°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb bond) paper or 25% cotton. All ‑ cotton envelopes must not exceed 70 ‑ g/m 2 (20 ‑ lb bond) weight.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For more information on label printing, characteristics, and design, see the Card Stock & Label Guide available at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 240°C (464°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 172‑kPa (25‑psi) pressure without

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
Page 46 of the Lexmark MS310DN user manual — Storing paper
Page 46 · click to enlarge
Page 46

Paper and specialty media guide 46

  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 inch) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Make sure the adhesive backing does not reach to the edge of the sheet. Zone coating of the adhesive should be at least 1 mm (0.04 inch) away from edges. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, then remove a 2 ‑ mm (0.08 ‑ inch) strip on the leading and driver edge, and then use a non ‑ oozing adhesive.
  • Portrait orientation is recommended, especially when printing bar codes.

Tips on using letterhead

  • Use letterhead designed specifically for laser printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together.
  • Page orientation is important when printing on letterhead. For information on how to load letterhead, see: – “Loading trays” on page 30 – “Loading the multipurpose feeder” on page 35

Tips on using transparencies

  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Feed transparencies from the standard tray, or the multipurpose feeder.
  • Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures up to 185°C (365°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • Note: If the transparency weight is set to Heavy and the transparency texture is set to Rough in the Paper menu, then transparencies can be printed at a temperature up to 195°C (383°F).
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex, fan, and straighten the stack to prevent sheets from sticking together.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.
Page 47 of the Lexmark MS310DN user manual — A6
Page 47 · click to enlarge
Page 47

Paper and specialty media guide 47

Supported paper sizes, types, and weights

Supported paper sizes

Paper size Standard tray Optional 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

A4

210 x 297 mm (8.3 x 11.7 in.)

A5

148 x 210 mm (5.8 x 8.3 in.)

A6

105 x 148 mm (4.1 x 5.8 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.) X

216 x 279 mm (8.5 x 11 in.)

216 x 356 mm (8.5 x 14 in.)

184 x 267 mm (7.3 x 10.5 in.)

Oficio (Mexico) 216 x 340 mm (8.5 x 13.4 in.)

216 x 330 mm (8.5 x 13 in.)

140 x 216 mm (5.5 x 8.5 in.)

76.2 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.)

98 x 225 mm (3.9 x 8.9 in.)

105 x 241 mm (4.1 x 9.5 in.)

1 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

2 Universal is supported in the standard tray only if the paper size is at least 105 x 148 mm (4.1 x 5.8 in.). Universal is supported in the optional 250- or 550-sheet tray only if the paper size is at least 148 x 210 mm (5.8 x 8.3 in.). Universal is supported in duplex mode only if the width is at least 210 mm (8.3 in.) and the length is at least 279 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Show 8 more labels / short text on this page
Letter · Legal · Executive · Folio · Statement · Universal1, 2 · 9 Envelope · 10 Envelope
Page 48 of the Lexmark MS310DN user manual — Supported paper types and weights
Page 48 · click to enlarge
Page 48

Paper and specialty media guide 48

Paper size Standard tray Optional 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

110 x 220 mm (4.3 x 8.7 in.)

162 x 229 mm (6.4 x 9 in.)

B5 Envelope 176 x 250 mm (6.9 x 9.8 in.) X X X

229 x 356 mm (9 x 14 in.)

1 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

2 Universal is supported in the standard tray only if the paper size is at least 105 x 148 mm (4.1 x 5.8 in.). Universal is supported in the optional 250- or 550-sheet tray only if the paper size is at least 148 x 210 mm (5.8 x 8.3 in.). Universal is supported in duplex mode only if the width is at least 210 mm (8.3 in.) and the length is at least 279 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Supported paper types and weights

The standard tray supports 60–90‑g/m2 (16–24‑lb) paper weights. The optional tray supports 60–120‑g/m2 (16–32‑lb) paper weights. The multipurpose feeder supports 60–163‑g/m2 (16–43‑lb) paper weights.

Lexmark MS310DN — Supported paper types and weights diagram (page 48)
Fig. 43 · Supported paper types and weights

Paper type 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

DL Envelope · C5 Envelope · Other Envelope

Page 49 of the Lexmark MS310DN user manual — Supported paper types and weights
Page 49 · click to enlarge
Page 49

Paper and specialty media guide 49

Paper type 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode

1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.

2 Bond and Heavy Paper are supported in duplex mode up to 90‑g/m2 (24‑lb) paper weight.

Light Paper · Heavy Paper2 · Rough/Cotton X

Page 50 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 50 · click to enlarge
Page 50

Printing

This chapter covers printing, printer reports, and job cancelation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 92 and “Storing paper” on page 46.

Printing documents

Printing a document

1 From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to match the paper loaded in the tray.

2 Send the print job.

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog.

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog.

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Printing 50

Page 51 of the Lexmark MS310DN user manual — For Windows users
Page 51 · click to enlarge
Page 51
  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu.

3 Adjust the toner darkness setting.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, adjust the toner darkness settings using the Local Printer Settings Utility or Printer Settings.

Printing from a mobile device

To download a compatible mobile printing application, visit www.lexmark.com/mobile.

Canceling a print job

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

Printing 51 · In Windows 8 · a Click

Page 52 of the Lexmark MS310DN user manual — For Macintosh users
Page 52 · click to enlarge
Page 52

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 52

Page 53 of the Lexmark MS310DN user manual — Default Source menu
Page 53 · click to enlarge
Page 53

Understanding the printer menus 53

Understanding the printer menus

You may print a menus list by printing the menu settings and network setup pages. Access the menus from a network printer by using the Embedded Web Server. If your printer is connected by USB or parallel cable, then access the menus using the Local Printer Settings Utility for Windows or Printer Settings for Macintosh.

Menus list

Paper Texture Paper Weight

Standard USB Set Date and Time

Paper menu

Default Source menu

Set a default paper source for all print jobs.

Tray [x] MP Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for MP Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
Show 11 more labels / short text on this page
Paper Menu Settings · Default Source · General Settings · Paper Size/Type · Print Settings · Configure MP · Paper Loading · Custom Types · Network/Ports Security · Use To · Default Source
Page 54 of the Lexmark MS310DN user manual — Paper Size/Type menu
Page 54 · click to enlarge
Page 54

Understanding the printer menus 54

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and the multipurpose feeder.

Specify the type of paper loaded in each tray.

Plain Paper Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Use To · Tray [x] Size · Tray [x] Type

Page 55 of the Lexmark MS310DN user manual — Paper Size/Type menu
Page 55 · click to enlarge
Page 55

Understanding the printer menus 55

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. Make sure to set the paper size value.

Specify the type of paper loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Type to appear as a menu.

Use To · MP Feeder Size · MP Feeder Type

Page 56 of the Lexmark MS310DN user manual — Paper Size/Type menu
Page 56 · click to enlarge
Page 56

Understanding the printer menus 56

Specify the paper size being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Show 5 more labels / short text on this page
Use To · Manual Paper Size · Manual Paper Type · Manual Envelope Size · Manual Envelope Type
Page 57 of the Lexmark MS310DN user manual — Paper Texture menu
Page 57 · click to enlarge
Page 57

Understanding the printer menus 57

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the default paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First sets the multipurpose feeder as the primary paper source regardless of settings.

Paper Texture menu

Specify the relative texture of the plain paper loaded.

Specify the relative texture of the card stock loaded.

  • Normal is the factory default setting.
  • The options appear only if card stock is supported.

Specify the relative texture of the transparencies loaded.

Specify the relative texture of the recycled paper loaded.

Specify the relative texture of the labels loaded.

Specify the relative texture of the bond paper loaded.

Specify the relative texture of the envelopes loaded.

Show 18 more labels / short text on this page
Use To · Configure MP · Cassette Manual First · Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough
Page 58 of the Lexmark MS310DN user manual — Paper Weight menu
Page 58 · click to enlarge
Page 58

Understanding the printer menus 58

Specify the relative texture of the rough envelopes loaded.

Specify the relative texture of the letterhead loaded.

Specify the relative texture of the preprinted paper loaded.

Specify the relative texture of the colored paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the cotton paper loaded.

Specify the relative texture of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only if the custom type is supported.

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Show 22 more labels / short text on this page
Use To · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough · Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy
Page 59 of the Lexmark MS310DN user manual — Paper Weight menu
Page 59 · click to enlarge
Page 59

Understanding the printer menus 59

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Specify the relative weight of the labels loaded.

Specify the relative weight of the bond paper loaded.

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Specify the relative weight of the colored paper loaded.

Specify that the weight of the paper loaded is light.

Specify that the weight of the paper loaded is heavy.

Show 23 more labels / short text on this page
Use To · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy
Page 60 of the Lexmark MS310DN user manual — Paper Loading menu
Page 60 · click to enlarge
Page 60

Understanding the printer menus 60

Specify the relative weight of the cotton or rough paper loaded.

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.

Paper Loading menu

Determine and set two‑sided printing for all print jobs that specify Recycled as the paper type.

Determine and set two‑sided printing for all print jobs that specify Bond as the paper type.

Determine and set two‑sided printing for all print jobs that specify Letterhead as the paper type.

Determine and set two‑sided printing for all print jobs that specify Preprinted as the paper type.

Determine and set two‑sided printing for all print jobs that specify Colored as the paper type.

Determine and set two‑sided printing for all print jobs that specify Light as the paper type.

Determine and set two‑sided printing for all print jobs that specify Heavy as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.
Show 20 more labels / short text on this page
Use To · Cotton/Rough Weight · Light Normal Heavy · Custom [x] Weight · Light Normal Heavy · Use To · Recycled Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off · Heavy Loading · Duplex Off
Page 61 of the Lexmark MS310DN user manual — Standard USB menu
Page 61 · click to enlarge
Page 61

Understanding the printer menus 61

Determine and set two‑sided printing for all print jobs that specify Custom [x] as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.

Custom Types menu

Associate a paper or specialty media type with a Custom Type [x] name.

Paper Card Stock Transparency Rough/Cotton Labels Envelope

  • Paper is the factory default setting for Custom Type [x].
  • The specialty media type must be supported in the selected tray or feeder in order to print from that source.

Specify a paper type when the Recycled setting is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Envelope Cotton

  • Paper is the factory default setting.
  • The Recycled paper type must be supported in the selected tray or feeder in order to print from that source.

Network/Ports menu

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is enabled, then the printer uses PCL emulation.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
Show 9 more labels / short text on this page
Use To · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled · Use To · PCL SmartSwitch · On Off
Page 62 of the Lexmark MS310DN user manual — Custom Types menu
Page 62 · click to enlarge
Page 62

Understanding the printer menus 62

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is enabled, then the printer uses PostScript emulation.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering.
  • The USB buffer size value can be changed in 1KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed. The menu selection is then updated.
Show 4 more labels / short text on this page
Use To · PS SmartSwitch · On Off · USB Buffer
Page 63 of the Lexmark MS310DN user manual — General Settings menu
Page 63 · click to enlarge
Page 63

Understanding the printer menus 63

Settings menu

General Settings menu

Set the language of the text appearing on the Embedded Web Server, Local Printer Settings for Windows, or Printer Settings for Macintosh.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job.

Use To · Display Language · Eco-Mode

Page 64 of the Lexmark MS310DN user manual — Settings menu
Page 64 · click to enlarge
Page 64

Understanding the printer menus 64

Set the amount of time the printer waits after a job is printed before it goes into a reduced power state.

  • “30 min” is the factory default setting.
  • “Disabled” appears only when Energy Conserve is set to Off.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.

To wake the printer from Sleep mode, try one of the following:

  • Press any hard button on the printer control panel.
  • Open the front door of the printer.
  • Remove paper from the standard bin.
  • Send a print job from the computer.
  • Load paper in the multipurpose feeder.
  • Turn off the printer, and then turn it back on.

Set the amount of time the printer waits after a job is printed before it enters Hibernate mode.

Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month

  • Disabled is the factory default setting in all countries except European Union countries and Switzerland.
  • 3 days is the factory default setting for all European Union countries and Switzerland.
  • The setting is also disabled if the printer detects an active Ethernet connection, regardless of country. However, to enable the setting even with an active Ethernet connection, click Settings > General Settings > Hibernate Timeout on Connection > Hibernate . To wake the printer from Hibernate mode, try one of the following:
  • Press the Sleep button for less than three seconds if Press Sleep Button is set to Hibernate.
  • Press and hold the Sleep button for more than three seconds if Press and Hold Sleep Button is set to Hibernate.
  • Turn off the printer, and then turn it back on.

Set the printer to Hibernate mode even if there is an active Ethernet connection.

Hibernate Timeout on Connection

Hibernate Do Not Hibernate

Show 7 more labels / short text on this page
Use To · Timeouts · Sleep Mode · Disabled 1–120 min · Timeouts · Hibernate Timeout · Timeouts
Page 65 of the Lexmark MS310DN user manual — Settings menu
Page 65 · click to enlarge
Page 65

Understanding the printer menus 65

Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.

  • “90 sec” is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs.

Set the amount of time in seconds the printer waits for additional data before canceling a print job.

  • “40 sec” is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.

Automatically restart the printer back into the normal operation.

Reboot when idle Reboot always Reboot never

Determine the number of automatic restarts the printer can perform.

  • 5 is the factory default setting.
  • When the number of restarts equals the specified value, then the error message appears.

Let the printer automatically continue printing from certain offline situations when not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.
Show 17 more labels / short text on this page
Use To · Timeouts · Print Timeout · Disabled 1–255 sec · Timeouts · Wait Timeout · Disabled 15–65535 sec · Error Recovery · Auto Reboot · Error Recovery · Max Auto Reboots · Print Recovery · Auto Continue · Disabled 5–255 sec · Print Recovery · Jam Recovery · On Off Auto
Page 66 of the Lexmark MS310DN user manual — Settings menu
Page 66 · click to enlarge
Page 66

Understanding the printer menus 66

  • On is the factory default setting. On sets the printer to automatically dump blank or partially printed pages to the standard bin after a jammed page has been cleared.
  • Off requires the user to remove all pages from all possible jam locations.

Successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Determine how the printer, while in idle state, reacts when you press the Sleep button for less than three seconds.

Do nothing Sleep Hibernate

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts when you press and hold the Sleep button for more than three seconds.

Do nothing Sleep Hibernate

Select a custom home message that appears as an alternating display of the printer status.

Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text [x]

Show 9 more labels / short text on this page
Use To · Print Recovery · Jam Assist · On Off · Print Recovery · Page Protect · Off On · Press Sleep Button · Custom Home Message
Page 67 of the Lexmark MS310DN user manual — Setup menu
Page 67 · click to enlarge
Page 67

Understanding the printer menus 67

Print Settings

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PCL Emulation is the factory default setting.
  • PCL Emulation uses a PCL interpreter for processing print jobs.
  • PS Emulation uses a PostScript interpreter for processing print jobs.
  • Setting a printer language default does not prevent a software program from sending print jobs that use another printer language.

Set the logical and physical printable area.

  • Normal is the factory default setting. Normal allows the printer to use the PCLand PostScript-defined printable regions and logical page sizes.
  • Whole Page allows the image to be moved outside the Normal-defined logical page area. However, if the user prints any data in the non-printable area, then the printer clips the image at the boundary defined by the Normal setting. This setting affects only pages printed using a PCL 5 interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

  • Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then the Memory Full [38] error message appears, but downloads are not deleted.
Show 6 more labels / short text on this page
Use To · Printer Language · Print Area · Normal Whole Page · Resource Save · On Off
Page 68 of the Lexmark MS310DN user manual — Finishing menu
Page 68 · click to enlarge
Page 68

Understanding the printer menus 68

Finishing menu

Specify whether two‑sided (duplex) printing is set as the default for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the software program.

For Windows users:

1 Click File > Print. 2 Click Properties, Preferences, Options, or Setup.

For Macintosh users:

1 Choose File > Print. 2 Adjust the settings from the print dialog and pop‑up menus.

Define the way two‑sided pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting. Long Edge binds pages along their long edge (left edge for portrait and top edge for landscape).
  • Short Edge binds pages along their short edge (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

Specify whether to insert blank pages in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether to insert blank separator sheets.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to (1,2,3) (1,2,3). If Collate is set to (1,1,1) (2,2,2), then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

Show 8 more labels / short text on this page
Use To · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Separator Source
Page 69 of the Lexmark MS310DN user manual — Quality menu
Page 69 · click to enlarge
Page 69

Understanding the printer menus 69

Print multiple‑page images on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specify the positioning of multiple‑page images when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

Specify the orientation of a multiple‑page document.

Print a border when using Paper Saver.

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions Isolated

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
Show 11 more labels / short text on this page
Use To · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Use To · Print Resolution · Pixel Boost · Toner Darkness
Page 70 of the Lexmark MS310DN user manual — PCL Emul menu
Page 70 · click to enlarge
Page 70

Understanding the printer menus 70

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • You can set this option from the printer software. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

PostScript menu

Print a page containing the PostScript error.

PCL Emul menu

Specify the orientation of text and graphics on the page.

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Set Paper Size and Orientation before setting Lines per Page.
Show 16 more labels / short text on this page
Use To · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Print PS Error · On Off · Use To · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page
Page 71 of the Lexmark MS310DN user manual — PostScript menu
Page 71 · click to enlarge
Page 71

Understanding the printer menus 71

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow printing of eighty 10 ‑ pitch characters.

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • Off is the factory default setting.
  • None cannot be selected. It is only displayed when it is selected by the PCL 5 interpreter. It also ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

View the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Show 12 more labels / short text on this page
Use To · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults
Page 72 of the Lexmark MS310DN user manual — Set Date and Time menu
Page 72 · click to enlarge
Page 72

Understanding the printer menus 72

Restore all tray and feeder assignments to the factory default settings.

Security menu

Set Date and Time menu

Current Date and Time View the current date and time settings for the printer.

Manually Set Date and Time

Enter the date and time.

Select the time zone.

[list of time zones]

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Set the time offset from Coordinated Universal Time or Greenwich Mean Time.

[input time in minutes]

Set the DST start time.

[list of weeks] [list of days] [list of months] [input time]

Set DST end time.

[list of weeks] [list of days] [list of months] [input time]

Set the DST offset time.

[input time in minutes]

Show 13 more labels / short text on this page
Use To · Tray Renumber · Restore Defaults · Yes No · Use To · [input date/time] · Time Zone · Automatically observe DST · On Off · UTC (GMT) Offset · DST Start · DST End · DST Offset
Page 73 of the Lexmark MS310DN user manual — Avoid paper jams
Page 73 · click to enlarge
Page 73

Saving money and the environment 73

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser/LED printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 43.

Conserving supplies

There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:

Use both sides of the paper

If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or the Lexmark Toolbar, to see how the document will look before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Avoid paper jams

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 92.

Page 74 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 74 · click to enlarge
Page 74

Saving money and the environment 74

Saving energy

If your printer is connected to a computer by a USB or parallel cable, then use the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. If your printer is connected to the network, then use the Embedded Web Server.

Using Sleep and Hibernate modes

Sleep mode saves energy by lowering power consumption during extended periods of inactivity.

Hibernate mode is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely. When in Hibernate mode, the printer does not respond to print jobs.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Sleep or Hibernate.

  • When Press Sleep Button is set to Sleep or Hibernate, press the Sleep button for less than three seconds to set the printer to Sleep or Hibernate mode.
  • When Press and Hold Sleep Button is set to Sleep or Hibernate, press and hold the Sleep button for more than three seconds to set the printer to Sleep or Hibernate mode.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Setup menu using the Local Printer Settings Utility or the Sleep Mode menu using the Printer Settings.

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep Mode.

Available settings range from 1 to 120 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

Page 75 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 75 · click to enlarge
Page 75

Saving money and the environment 75

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep Mode.

4 Click Submit.

Using the printer settings on the computer (Windows only)

  • Access the Setup menu using the Local Printer Settings Utility.

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

4 Click Submit.

Using the printer settings on the computer

Depending on your operating system, access the Hibernate Timeout menu using the Local Printer Settings Utility or Print Settings.

Using Schedule Power Modes

Schedule Power Modes lets the user schedule when the printer goes into a reduced power state or into the Ready state.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 76 of the Lexmark MS310DN user manual — Recycling Lexmark packaging
Page 76 · click to enlarge
Page 76

Saving money and the environment 76

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Schedule Power Modes.

3 From the Action menu, select the power mode.

4 From the Time menu, select the time.

5 From the Day(s) menu, select the day or days.

6 Click Add.

Using the printer settings on the computer (Windows only)

  • Access the Schedule Power Modes menu using the Local Printer Settings Utility.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Page 77 of the Lexmark MS310DN user manual — Returning Lexmark cartridges for reuse or recycling
Page 77 · click to enlarge
Page 77

Saving money and the environment 77

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 78 of the Lexmark MS310DN user manual — Statement of Volatility
Page 78 · click to enlarge
Page 78

Securing the printer 78

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop computers in the location shown to secure the printer in place.

Lexmark MS310DN — Securing the printer diagram (page 78)
Fig. 44 · Securing the printer
Lexmark MS310DN — Securing the printer diagram (page 78)
Fig. 45 · Securing the printer

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store operating system, device settings, and network information.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.
Page 79 of the Lexmark MS310DN user manual — Erasing non ‑ volatile memory
Page 79 · click to enlarge
Page 79

Securing the printer 79

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Erasing non ‑ volatile memory

1 Turn off the printer.

2 Open the front door of the printer and hold down while turning the printer on. Release only when the printer control panel light sequence matches the light sequence in the following illustration.

Show 4 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On
Page 80 of the Lexmark MS310DN user manual — Finding printer security information
Page 80 · click to enlarge
Page 80

Securing the printer 80

3 Press until the printer control panel light sequence matches the light sequence in the following illustration,

and then press .

The printer will restart several times during this process.

4 Close the front door.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information:

1 Go to www.lexmark.com, and then navigate to Support & Downloads > select your printer.

2 Click the Manuals tab, and then select Embedded Web Server — Security: Administrator’s Guide.

‑ Blinking · ‑ Blinking

Page 81 of the Lexmark MS310DN user manual — Using the Embedded Web Server
Page 81 · click to enlarge
Page 81

Maintaining the printer 81

Maintaining the printer

Cleaning the printer

Cleaning the printer

1 Make sure that the printer is turned off and unplugged from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

5 Make sure all areas of the printer are dry before sending a new print job.

Checking the status of parts and supplies

Checking the status of parts and supplies

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Page 82 of the Lexmark MS310DN user manual — Ordering toner cartridges
Page 82 · click to enlarge
Page 82

Maintaining the printer 82

Using the printer control panel

From the printer control panel, press , and then check the supply and part status in the Supply Information section.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, initial estimates assume future supplies consumption based on the International Organization for Standardization* test methods and page content.

* Average continuous black declared cartridge yield in accordance with ISO/IEC 19752.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Ordering toner cartridges

  • The estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.
Page 83 of the Lexmark MS310DN user manual — Estimated number of remaining pages
Page 83 · click to enlarge
Page 83

Maintaining the printer 83

Item Return Program cartridge

For the United States and Canada

High Yield Toner Cartridge 501H

Extra High Yield Toner Cartridge 501X1

Ultra High Yield Toner Cartridge 501U2

For the European Union, European Economic Area , and Switzerland

High Yield Toner Cartridge 502H

Extra High Yield Toner Cartridge 502X1

Ultra High Yield Toner Cartridge 502U2

For the Asia Pacific Region (includes Australia and New Zealand)

High Yield Toner Cartridge 503H

Extra High Yield Toner Cartridge 503X1

Ultra High Yield Toner Cartridge 503U2

For Latin America (includes Puerto Rico and Mexico)

High Yield Toner Cartridge 504H

Extra High Yield Toner Cartridge 504X1

Ultra High Yield Toner Cartridge 504U2

For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States

High Yield Toner Cartridge 505H

Extra High Yield Toner Cartridge 505X1

Ultra High Yield Toner Cartridge 505U2

1 This cartridge is supported only in MS410d, MS410dn, MS510dn, MS610dn, and MS610de printer models.

2 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

For more information on countries located in each region, visit www.lexmark.com/regions.

High Yield Toner Cartridge 500HA1

1 This cartridge is supported only in MS310d and MS310dn printer models.

2 This cartridge is supported only in MS410d and MS410dn printer models.

3 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

Show 7 more labels / short text on this page
Toner Cartridge 501 · Toner Cartridge 502 · Toner Cartridge 503 · Toner Cartridge 504 · Toner Cartridge 505 · Item Regular cartridge · Worldwide
Page 84 of the Lexmark MS310DN user manual — Storing supplies
Page 84 · click to enlarge
Page 84

Maintaining the printer 84

Extra High Yield Toner Cartridge 500XA2

Ultra High Yield Toner Cartridge 500UA3

1 This cartridge is supported only in MS310d and MS310dn printer models.

2 This cartridge is supported only in MS410d and MS410dn printer models.

3 This cartridge is supported only in MS510dn, MS610dn, and MS610de printer models.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner from toner cartridge.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 500Z 500ZA

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Item Regular cartridge

Page 85 of the Lexmark MS310DN user manual — Replacing the toner cartridge
Page 85 · click to enlarge
Page 85

Maintaining the printer 85

Replacing supplies

Replacing the toner cartridge

1 Press the button on the right side of the printer, and then open the front door.

Lexmark MS310DN — Replacing the toner cartridge diagram (page 85)
Fig. 46 · Replacing the toner cartridge
Lexmark MS310DN — Replacing the toner cartridge diagram (page 85)
Fig. 47 · Replacing the toner cartridge

2 Pull the toner cartridge out using the handle.

Lexmark MS310DN — Replacing the toner cartridge diagram (page 85)
Fig. 48 · Replacing the toner cartridge

3 Unpack the toner cartridge, and then remove all packing materials.

4 Shake the new cartridge to redistribute the toner.

Lexmark MS310DN — Replacing the toner cartridge diagram (page 85)
Fig. 49 · Replacing the toner cartridge

5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Page 86 of the Lexmark MS310DN user manual — Replacing the imaging unit
Page 86 · click to enlarge
Page 86

Maintaining the printer 86

Lexmark MS310DN — Replacing the imaging unit diagram (page 86)
Fig. 50 · Replacing the imaging unit
Lexmark MS310DN — Replacing the imaging unit diagram (page 86)
Fig. 51 · Replacing the imaging unit

6 Close the front door.

Replacing the imaging unit

1 Press the button on the right side of the printer, and then open the front door.

2 Pull the toner cartridge out using the handle.

Page 87 of the Lexmark MS310DN user manual — Replacing the imaging unit
Page 87 · click to enlarge
Page 87

Maintaining the printer 87

3 Lift the green handle, and then pull the imaging unit out of the printer.

Lexmark MS310DN — Replacing the imaging unit diagram (page 87)
Fig. 52 · Replacing the imaging unit

4 Unpack the new imaging unit, and then shake it.

Lexmark MS310DN — Replacing the imaging unit diagram (page 87)
Fig. 53 · Replacing the imaging unit

5 Remove all packing materials from the imaging unit.

Lexmark MS310DN — Replacing the imaging unit diagram (page 87)
Fig. 54 · Replacing the imaging unit
Page 88 of the Lexmark MS310DN user manual — Before moving the printer
Page 88 · click to enlarge
Page 88

Maintaining the printer 88

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark MS310DN — Moving the printer diagram (page 88)
Fig. 55 · Moving the printer
Lexmark MS310DN — Moving the printer diagram (page 88)
Fig. 56 · Moving the printer

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

8 Close the front door.

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
Page 89 of the Lexmark MS310DN user manual — Shipping the printer
Page 89 · click to enlarge
Page 89

Maintaining the printer 89

  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
Lexmark MS310DN — Moving the printer to another location diagram (page 89)
Fig. 57 · Moving the printer to another location
Lexmark MS310DN — Moving the printer to another location diagram (page 89)
Fig. 58 · Moving the printer to another location
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging.

Page 90 of the Lexmark MS310DN user manual — Configuring supply notifications from the Embedded Web Server
Page 90 · click to enlarge
Page 90

Managing the printer 90

Managing the printer

This chapter covers basic administrative support tasks using the Embedded Web Server.

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Reports, and then click the type of report you want to view.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge and imaging unit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the printer IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Page 91 of the Lexmark MS310DN user manual — Copying printer settings to other printers
Page 91 · click to enlarge
Page 91

Managing the printer 91

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e-mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached. The user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops when the supply condition is reached. The supply must be replaced to continue printing.

1The printer generates an e-mail about the status of the supply when supply notification is enabled.

2The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click the Copy Printer Settings tab.

3 If you want to change the language, then select a language from the drop‑down menu, and then click Click here to submit language.

4 Click the Printer Settings tab.

5 Type the IP addresses of the source and target printers in their appropriate fields.

6 Click Copy Printer Settings.

Notification Description

Page 92 of the Lexmark MS310DN user manual — Load paper properly
Page 92 · click to enlarge
Page 92

Clearing jams

Carefully select paper and specialty media and load them properly to avoid most jams. For more information, see “Avoiding jams” on page 92. If jams do occur, then follow the steps outlined in this chapter.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.

Correct loading of paper Incorrect loading of paper

Lexmark MS310DN — Load paper properly diagram (page 92)
Fig. 59 · Load paper properly
Lexmark MS310DN — Load paper properly diagram (page 92)
Fig. 60 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.

Clearing jams 92

Page 93 of the Lexmark MS310DN user manual — Accessing jam areas
Page 93 · click to enlarge
Page 93
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS310DN — Accessing jam areas diagram (page 93)
Fig. 61 · Accessing jam areas
Lexmark MS310DN — Accessing jam areas diagram (page 93)
Fig. 62 · Accessing jam areas
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
Lexmark MS310DN — Use recommended paper diagram (page 93)
Fig. 63 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the Embedded Web Server or the computer.

Accessing jam areas

Open the doors and pull out the trays to access jam areas.

Clearing jams 93

Page 94 of the Lexmark MS310DN user manual — [x] ‑ page jam, open front door. [20y.xx]
Page 94 · click to enlarge
Page 94
Lexmark MS310DN — [x]-page jam, open front door. [20y.xx] diagram (page 94)
Fig. 64 · [x]-page jam, open front door. [20y.xx]
Lexmark MS310DN — [x]-page jam, open front door. [20y.xx] diagram (page 94)
Fig. 65 · [x]-page jam, open front door. [20y.xx]

3 Standard 250‑sheet tray (Tray 1)

4 Optional 250‑ or 550‑sheet tray (Tray 2)

5 Multipurpose feeder door

  • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will print.

[x] ‑ page jam, open front door. [20y.xx]

Show 5 more labels / short text on this page
Clearing jams 94 · Access area Description · 1 Standard bin · 2 Rear door · 6 Front door
Page 95 of the Lexmark MS310DN user manual — [x]-page jam, open front door. [20y.xx]
Page 95 · click to enlarge
Page 95

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then do the following.

Show 6 more labels / short text on this page
Clearing jams 95 · ‑ On · ‑ On · ‑ On · ‑ On · ‑ On
Page 96 of the Lexmark MS310DN user manual — [x]-page jam, open front door. [20y.xx]
Page 96 · click to enlarge
Page 96

1 Press the button on the right side of the printer, and then open the front door.

2 Pull out the toner cartridge using the handle.

3 Lift the green handle, and then pull out the imaging unit from the printer.

Clearing jams 96

Page 97 of the Lexmark MS310DN user manual — [x]-page jam, open front door. [20y.xx]
Page 97 · click to enlarge
Page 97

4 Place the imaging unit aside on a flat, smooth surface.

5 Lift the green flap in front of the printer.

Lexmark MS310DN — [x]-page jam, open front door. [20y.xx] diagram (page 97)
Fig. 66 · [x]-page jam, open front door. [20y.xx]

6 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS310DN — [x]-page jam, open front door. [20y.xx] diagram (page 97)
Fig. 67 · [x]-page jam, open front door. [20y.xx]

Clearing jams 97

Page 98 of the Lexmark MS310DN user manual — [x]-page jam, open front door. [20y.xx]
Page 98 · click to enlarge
Page 98

7 Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside the printer, and then insert the imaging unit into the printer.

8 Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer, and then insert the cartridge into the printer.

9 Close the front door.

10 From the printer control panel, press to clear the message and continue printing.

Clearing jams 98

Page 99 of the Lexmark MS310DN user manual — [x] ‑ page jam, open rear door. [20y.xx]
Page 99 · click to enlarge
Page 99

[x] ‑ page jam, open rear door. [20y.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 6 more labels / short text on this page
Clearing jams 99 · ‑ On · ‑ On · ‑ On · ‑ On · ‑ On
Page 100 of the Lexmark MS310DN user manual — [x]-page jam, open rear door. [20y.xx]
Page 100 · click to enlarge
Page 100

If the supplemental light sequence matches the light sequence in the preceding illustration, then do the following.

1 Press the button on the right side of the printer, and then open the front door.

2 Gently pull down the rear door.

Lexmark MS310DN — [x]-page jam, open rear door. [20y.xx] diagram (page 100)
Fig. 68 · [x]-page jam, open rear door. [20y.xx]

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 100

Page 101 of the Lexmark MS310DN user manual — [x] ‑ page jam, clear standard bin. [20y.xx]
Page 101 · click to enlarge
Page 101

4 Close the rear and front doors.

5 From the printer control panel, press to clear the message and continue printing.

[x] ‑ page jam, clear standard bin. [20y.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Clearing jams 101 · ‑ On · ‑ On

Page 102 of the Lexmark MS310DN user manual — [x]-page jam, clear standard bin. [20y.xx]
Page 102 · click to enlarge
Page 102

If the supplemental light sequence matches the light sequence in the preceding illustration, then do the following.

1 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS310DN — [x]-page jam, clear standard bin. [20y.xx] diagram (page 102)
Fig. 69 · [x]-page jam, clear standard bin. [20y.xx]

2 From the printer control panel, press to clear the message and continue printing.

Show 4 more labels / short text on this page
Clearing jams 102 · ‑ On · ‑ On · ‑ On
Page 103 of the Lexmark MS310DN user manual — Supplemental light sequences
Page 103 · click to enlarge
Page 103

[x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Supplemental light sequences

Lexmark MS310DN — Supplemental light sequences diagram (page 103)
Fig. 70 · Supplemental light sequences
Show 7 more labels / short text on this page
Clearing jams 103 · ‑ On · ‑ On · Light sequence · ‑ On · ‑ On · ‑ On
Page 104 of the Lexmark MS310DN user manual — [x]-page jam, remove tray 1 to clear duplex. [23y.xx]
Page 104 · click to enlarge
Page 104

If the supplemental light sequence matches any of the light sequences in the preceding illustrations, then do the following.

1 Pull out the tray completely.

Lexmark MS310DN — [x]-page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 104)
Fig. 71 · [x]-page jam, remove tray 1 to clear duplex. [23y.xx…
Show 5 more labels / short text on this page
Clearing jams 104 · Light sequence · ‑ On · ‑ Blinking · ‑ On
Page 105 of the Lexmark MS310DN user manual — [x]-page jam, remove tray 1 to clear duplex. [23y.xx]
Page 105 · click to enlarge
Page 105

2 Locate the blue lever, and then pull it down to release the jam.

Lexmark MS310DN — [x]-page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 105)
Fig. 72 · [x]-page jam, remove tray 1 to clear duplex. [23y.xx…
Lexmark MS310DN — [x]-page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 105)
Fig. 73 · [x]-page jam, remove tray 1 to clear duplex. [23y.xx…

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS310DN — [x]-page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 105)
Fig. 74 · [x]-page jam, remove tray 1 to clear duplex. [23y.xx…

4 Insert the tray.

5 From the printer control panel, press to clear the message and continue printing.

Clearing jams 105

Page 106 of the Lexmark MS310DN user manual — Supplemental light sequences
Page 106 · click to enlarge
Page 106

[x] ‑ page jam, remove tray [x]. [24y.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Supplemental light sequences

Show 8 more labels / short text on this page
Clearing jams 106 · ‑ On · ‑ On · Light sequence · ‑ On · ‑ On · ‑ On · ‑ On
Page 107 of the Lexmark MS310DN user manual — [x]-page jam, remove tray [x]. [24y.xx]
Page 107 · click to enlarge
Page 107

If the supplemental light sequence matches any of the light sequences in the preceding illustrations, then do the following.

1 Pull out the tray completely.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark MS310DN — [x]-page jam, remove tray [x]. [24y.xx] diagram (page 107)
Fig. 75 · [x]-page jam, remove tray [x]. [24y.xx]
Show 6 more labels / short text on this page
Clearing jams 107 · Light sequence · ‑ On · ‑ On · ‑ On · ‑ On
Page 108 of the Lexmark MS310DN user manual — [x] ‑ page jam, clear manual feeder. [250.xx]
Page 108 · click to enlarge
Page 108

3 Insert the tray.

4 From the printer control panel, press to clear the message and continue printing.

[x] ‑ page jam, clear manual feeder. [250.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Clearing jams 108 · ‑ On · ‑ On

Page 109 of the Lexmark MS310DN user manual — [x]-page jam, clear manual feeder. [250.xx]
Page 109 · click to enlarge
Page 109

If the supplemental light sequence matches the light sequence in the preceding illustration, then do the following.

1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

2 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS310DN — [x]-page jam, clear manual feeder. [250.xx] diagram (page 109)
Fig. 76 · [x]-page jam, clear manual feeder. [250.xx]

3 Reload paper into the multipurpose feeder.

Lexmark MS310DN — [x]-page jam, clear manual feeder. [250.xx] diagram (page 109)
Fig. 77 · [x]-page jam, clear manual feeder. [250.xx]

4 From the printer control panel, press to clear the message and continue printing.

Show 5 more labels / short text on this page
Clearing jams 109 · ‑ On · ‑ On · ‑ On · ‑ On
Page 110 of the Lexmark MS310DN user manual — Cartridge, imaging unit mismatch [41.xy]
Page 110 · click to enlarge
Page 110

Understanding the printer messages

Toner cartridge messages

Cartridge, imaging unit mismatch [41.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then do the following:

1 Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies.

2 Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.

  • MICR supplies are supported only in select printer models.
  • Use a MICR toner cartridge and imaging unit for printing checks and other similar documents.
  • Use a non-MICR toner cartridge and imaging unit for regular print jobs.

‑ On · ‑ On

Page 111 of the Lexmark MS310DN user manual — Cartridge nearly low [88.xy]
Page 111 · click to enlarge
Page 111

Cartridge low [88.xx]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then you may need

to order a toner cartridge. If necessary, press on the printer control panel to continue printing.

Cartridge nearly low [88.xy]

‑ On · ‑ On · ‑ Slowly blinking

Page 112 of the Lexmark MS310DN user manual — Non-Lexmark cartridge, see User’s Guide [33.xy]
Page 112 · click to enlarge
Page 112

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press on the printer control panel, if necessary, to continue printing.

Cartridge very low [88.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then you may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, press on the printer control panel to continue printing.

Non-Lexmark cartridge, see User’s Guide [33.xy]

If the printer control panel lights blink from left to right repeatedly, then the printer has detected a non‑Lexmark cartridge installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ Blinking · ‑ On · ‑ On
Page 113 of the Lexmark MS310DN user manual — Replace cartridge, 0 estimated pages remain [88.xy]
Page 113 · click to enlarge
Page 113

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,

press and simultaneously for at least three seconds to clear the light sequence.

Replace cartridge, 0 estimated pages remain [88.xy]

‑ On · ‑ On

Page 114 of the Lexmark MS310DN user manual — Replace cartridge, 0 estimated pages remain [88.xy]
Page 114 · click to enlarge
Page 114

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then replace the toner cartridge. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

‑ On · ‑ Blinking · ‑ On

Page 115 of the Lexmark MS310DN user manual — Replace cartridge, printer region mismatch [42.xy]
Page 115 · click to enlarge
Page 115

Replace cartridge, printer region mismatch [42.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Blinking · ‑ On
Page 116 of the Lexmark MS310DN user manual — Reinstall missing or unresponsive cartridge [31.xy]
Page 116 · click to enlarge
Page 116

If the supplemental light sequence matches the light sequence in the preceding illustration, then install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values.

Printer and toner cartridge regions

Region number (x) Region (y)

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

  • The x and y values represent . xy in the code that appears on the Embedded Web Server.
  • The x and y values must match for printing to continue.

Reinstall missing or unresponsive cartridge [31.xy]

Show 5 more labels / short text on this page
0 Global · 4 Latin America · 9 Invalid · ‑ On · ‑ On
Page 117 of the Lexmark MS310DN user manual — Reinstall missing or unresponsive cartridge [31.xy]
Page 117 · click to enlarge
Page 117

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Remove the toner cartridge, and then reinstall it.
  • Remove the toner cartridge, and then install a new one. For more information, see the instruction sheet that came with the supply.

‑ On · ‑ On · ‑ On

Page 118 of the Lexmark MS310DN user manual — Replace unsupported cartridge [32.xy]
Page 118 · click to enlarge
Page 118

Replace unsupported cartridge [32.xy]

If the printer control panel light sequence matches the preceding light sequence, then remove the toner cartridge, and then install a supported one. For more information, see the instruction sheet that came with the supply.

Show 4 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On
Page 119 of the Lexmark MS310DN user manual — Imaging unit nearly low [84.xy]
Page 119 · click to enlarge
Page 119

Imaging unit messages

Imaging unit low [84.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then you may need

to order an imaging unit. If necessary, press on the printer control panel to continue printing.

Imaging unit nearly low [84.xy]

‑ Blinking · ‑ On

Page 120 of the Lexmark MS310DN user manual — Non-Lexmark imaging unit, see User’s Guide [33.xy]
Page 120 · click to enlarge
Page 120

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press on the printer control panel, if necessary, to continue printing.

Imaging unit very low [84.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then you may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, press on the printer control panel to continue printing.

Non-Lexmark imaging unit, see User’s Guide [33.xy]

If the printer control panel lights blink from left to right repeatedly, then the printer has detected a non‑Lexmark imaging unit installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

Show 6 more labels / short text on this page
‑ Slowly blinking · ‑ Blinking · ‑ On · ‑ Blinking · ‑ Blinking · ‑ On
Page 121 of the Lexmark MS310DN user manual — Replace imaging unit, 0 estimated pages remain [84.xy]
Page 121 · click to enlarge
Page 121

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,

press and simultaneously for at least four seconds to clear the light sequence.

Replace imaging unit, 0 estimated pages remain [84.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then replace the imaging unit. For more information, see the instruction sheet that came with the supply.

‑ On · ‑ Blinking · ‑ On

Page 122 of the Lexmark MS310DN user manual — Reinstall missing or unresponsive imaging unit [31.xy]
Page 122 · click to enlarge
Page 122

Reinstall missing or unresponsive imaging unit [31.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ Blinking · ‑ On · ‑ On · ‑ Blinking
Page 123 of the Lexmark MS310DN user manual — Replace unsupported imaging unit [32.xy]
Page 123 · click to enlarge
Page 123

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Remove the imaging unit, and then reinstall it.
  • Remove the imaging unit, and then install a new one. For more information, see the instruction sheet that came with the supply.

Replace unsupported imaging unit [32.xy]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then remove the imaging unit, and then install a supported one. For more information, see the instruction sheet that came with the supply.

Show 4 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Blinking
Page 124 of the Lexmark MS310DN user manual — Incorrect paper size, open [paper source] [34]
Page 124 · click to enlarge
Page 124

Paper loading messages

Incorrect paper size, open [paper source] [34]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

‑ On · ‑ On · ‑ On

Page 125 of the Lexmark MS310DN user manual — Load [paper source] with [custom type name] [orientation]
Page 125 · click to enlarge
Page 125

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the correct size of paper.
  • From the printer control panel, press to clear the light sequence and print using a different tray.
  • Check the length and width guides and make sure the paper is loaded properly in the tray.
  • Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings.
  • Make sure the correct paper size and type are specified in the Paper menu on the printer control panel: – If the printer is on a network, then access the Embedded Web Server.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate IP address in TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Paper Menu . – If the printer is connected to a computer by a USB or parallel cable, then access the Paper menu through the

Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.

Load [paper source] with [custom type name] [orientation]

Show 4 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On
Page 126 of the Lexmark MS310DN user manual — Load [paper source] with [custom type string] [orientation]
Page 126 · click to enlarge
Page 126

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • Press to cancel the print job.

Load [paper source] with [custom type string] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • From the printer control panel, press to cancel the print job.

‑ On · ‑ On · ‑ On

Page 127 of the Lexmark MS310DN user manual — Load [paper source] with [paper size] [orientation]
Page 127 · click to enlarge
Page 127

Load [paper source] with [paper size] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the tray or feeder with the correct size of paper.
  • From the printer control panel, press to continue printing.
  • From the printer control panel, press to cancel the print job.

‑ On · ‑ On

Page 128 of the Lexmark MS310DN user manual — Load [paper source] with [paper type] [paper size] [orientation]
Page 128 · click to enlarge
Page 128

Load [paper source] with [paper type] [paper size] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • From the printer control panel, press to cancel the print job.

‑ On · ‑ On

Page 129 of the Lexmark MS310DN user manual — Load Manual Feeder with [custom type name] [orientation]
Page 129 · click to enlarge
Page 129

Load Manual Feeder with [custom type name] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • Press to cancel the print job.

‑ On · ‑ On

Page 130 of the Lexmark MS310DN user manual — Load Manual Feeder with [custom type string] [orientation]
Page 130 · click to enlarge
Page 130

Load Manual Feeder with [custom type string] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • Press to cancel the print job.

‑ On · ‑ On

Page 131 of the Lexmark MS310DN user manual — Load Manual Feeder with [paper size] [orientation]
Page 131 · click to enlarge
Page 131

Load Manual Feeder with [paper size] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • Press to cancel the print job.

‑ On · ‑ On

Page 132 of the Lexmark MS310DN user manual — Load Manual Feeder with [paper type] [paper size] [orientation]
Page 132 · click to enlarge
Page 132

Load Manual Feeder with [paper type] [paper size] [orientation]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • From the printer control panel, press to continue printing.
  • Press to cancel the print job.

‑ On · ‑ On

Page 133 of the Lexmark MS310DN user manual — Network [x] software error [54]
Page 133 · click to enlarge
Page 133

Remove paper from standard output bin

If the printer control panel light sequence matches the light sequence in the preceding illustration, then do the following:

1 Remove the paper stack from the standard output bin.

2 From the printer control panel, press to continue printing.

Printer communication error messages

Network [x] software error [54]

‑ Blinking

Page 134 of the Lexmark MS310DN user manual — Remove paper from standard output bin
Page 134 · click to enlarge
Page 134

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing.
  • Unplug the router, then wait for 30 seconds, and then plug the router back again.
  • Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or print server. For more information, visit the Lexmark Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Blinking · ‑ On
Page 135 of the Lexmark MS310DN user manual — Standard parallel port disabled [56]
Page 135 · click to enlarge
Page 135

Standard parallel port disabled [56]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Slowly blinking · ‑ Slowly blinking
Page 136 of the Lexmark MS310DN user manual — Standard network software error [54]
Page 136 · click to enlarge
Page 136

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Network/Ports > Parallel . 3 In the Parallel Buffer field, enter 2 . 4 Click Submit . – If the printer is connected to a computer by a USB or parallel cable, then access the Parallel menu through the

Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.

Standard network software error [54]

‑ On · ‑ On · ‑ On

Page 137 of the Lexmark MS310DN user manual — Standard network software error [54]
Page 137 · click to enlarge
Page 137

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing.
  • Turn off the printer, and then turn it back on.
  • Update the network firmware in the printer or on the print server. For more information, visit the Lexmark Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

‑ On · ‑ On · ‑ On

Page 138 of the Lexmark MS310DN user manual — Rear USB port disabled [56]
Page 138 · click to enlarge
Page 138

Rear USB port disabled [56]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Blinking · ‑ Blinking
Page 139 of the Lexmark MS310DN user manual — Insufficient memory to collate job [37]
Page 139 · click to enlarge
Page 139

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Network/Ports > Standard USB . 3 In the USB Buffer field, enter 2 . 4 Click Submit . – If the printer is connected to a computer by a USB or parallel cable, then access the USB menu through the Local

Printer Settings Utility for Windows.

Insufficient memory error messages

Insufficient memory to collate job [37]

‑ On · ‑ On · ‑ On

Page 140 of the Lexmark MS310DN user manual — Insufficient memory error messages
Page 140 · click to enlarge
Page 140

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to print the portion of the job already stored and begin collating the rest of the print job.
  • From the printer control panel, press to cancel the print job.

‑ On · ‑ On · ‑ On

Page 141 of the Lexmark MS310DN user manual — Insufficient memory to support Resource Save feature [35]
Page 141 · click to enlarge
Page 141

Insufficient memory to support Resource Save feature [35]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ Blinking · ‑ On
Page 142 of the Lexmark MS310DN user manual — Memory full [38]
Page 142 · click to enlarge
Page 142

If the supplemental light sequence matches the light sequence in the preceding illustration, then press on the printer control panel to clear the light sequence.

The job will be printed without using Resource Save.

Memory full [38]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

‑ On · ‑ On

Page 143 of the Lexmark MS310DN user manual — Close front door
Page 143 · click to enlarge
Page 143

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing. A data loss will occur.
  • From the printer control panel, press to cancel the print job.
  • Install additional printer memory.
  • Decrease the resolution setting.

Miscellaneous messages

Close front door

If the printer control light sequence matches the light sequence in the preceding illustration, then close the front door of the printer.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On · ‑ On
Page 144 of the Lexmark MS310DN user manual — Complex page, some data may not have printed [39]
Page 144 · click to enlarge
Page 144

Complex page, some data may not have printed [39]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On · ‑ On
Page 145 of the Lexmark MS310DN user manual — PPDS font error [50]
Page 145 · click to enlarge
Page 145

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing. A data loss may occur.
  • From the printer control panel, press to cancel the print job.
  • Install additional printer memory.
  • Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job.

PPDS font error [50]

‑ On · ‑ On

Page 146 of the Lexmark MS310DN user manual — PPDS font error [50]
Page 146 · click to enlarge
Page 146

If the printer control light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

  • From the printer control panel, press to continue printing.
  • From the printer control panel, press to cancel the print job.

‑ On · ‑ Blinking · ‑ On

Page 147 of the Lexmark MS310DN user manual — Printer had to restart. Last job may be incomplete.
Page 147 · click to enlarge
Page 147

Printer had to restart. Last job may be incomplete.

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press on the printer control panel to continue printing.

For more information, visit http://support.lexmark.com or contact customer support.

Show 4 more labels / short text on this page
‑ Blinking · ‑ Blinking · ‑ Blinking · ‑ On
Page 148 of the Lexmark MS310DN user manual — Service error
Page 148 · click to enlarge
Page 148

Service error

If the printer control panel light sequence matches the light sequence in the preceding illustration, then turn off the printer, and then turn it back on.

If the lights are still blinking after 10 seconds, then the printer may need to be serviced. Visit http://support.lexmark.com or contact your system support person.

Show 6 more labels / short text on this page
‑ Blinking · ‑ Blinking · ‑ Blinking · ‑ Blinking · ‑ Blinking · ‑ Blinking
Page 149 of the Lexmark MS310DN user manual — Too many trays attached [58]
Page 149 · click to enlarge
Page 149

Too many trays attached [58]

If the printer control panel light sequence matches the light sequence in the preceding illustration, then press twice quickly to see the supplemental light sequence.

Show 5 more labels / short text on this page
‑ On · ‑ On · ‑ On · ‑ On · ‑ On
Page 150 of the Lexmark MS310DN user manual — The printer is not responding
Page 150 · click to enlarge
Page 150

If the supplemental light sequence matches the light sequence in the preceding illustration, then do the following:

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra tray or trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Solving printer problems

Basic printer problems

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Show 6 more labels / short text on this page
‑ On · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 151 of the Lexmark MS310DN user manual — Solving printer problems
Page 151 · click to enlarge
Page 151

Go to step 6. Make sure to match the following:

Check if the cables connecting the printer and the computer are inserted in the correct ports.

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Step 6 Make sure the electrical outlet is not turned off by a switch or breaker.

Turn on the switch or reset the breaker.

Go to step 7.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Step 8 Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Go to step 11. Use correct printer driver settings.

Check if you have selected the correct port settings in the printer driver.

Are the port settings correct?

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Show 7 more labels / short text on this page
Action Yes No · Step 5 · Step 7 · Step 9 · Step 10 · Step 11 · Step 12
Page 152 of the Lexmark MS310DN user manual — Cannot detect internal option
Page 152 · click to enlarge
Page 152

Option problems

Cannot detect internal option

The problem is solved. Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?

Go to step 3. Connect the internal option to the controller board.

Check if the internal option is properly installed in the controller board.

a Turn off the printer using the power switch, and then unplug the power

cord from the electrical outlet. b Make sure the internal option is installed in the appropriate connector

in the controller board. c Connect the power cord to the printer, then to a properly grounded

electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

The problem is solved. Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 21. b Resend the print job.

Does the internal option operate correctly?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 153 of the Lexmark MS310DN user manual — Tray problems
Page 153 · click to enlarge
Page 153

Tray problems

The problem is solved. Go to step 2.

a Open the tray and do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved. Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn the

printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed.

Print a menu settings page, and then check if the tray is listed in the Installed Options list.

Is the tray listed in the menu settings page?

Go to step 5. Manually add the tray in the printer driver.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

The problem is solved. Contact customer support.

Check if the option is selected.

a From the application you are using, select the option. For Mac OS X

version 9 users, make sure the printer is set up in Chooser. b Resend the print job.

Is the tray working?

Show 6 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 154 of the Lexmark MS310DN user manual — Paper jam message remains after jam is cleared
Page 154 · click to enlarge
Page 154

Paper feed problems

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see “Avoiding

jams” on page 92. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

Open front door and remove all trays.

Contact customer support.

The problem is solved.

a Clear any jammed pages.

b Press to clear the message and continue printing.

Does the paper jam message remain?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 155 of the Lexmark MS310DN user manual — Print jobs do not print
Page 155 · click to enlarge
Page 155

Jammed pages are not reprinted

a From the Print Recovery menu, set Jam Recovery to Auto or On. To

The problem is solved. Contact customer support.

access the Print Recovery menu, try one or more of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > General Settings > Print Recovery .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or the Printer Settings for Macintosh. b Resend the pages that did not print.

Were the jammed pages reprinted?

Solving print problems

Printing problems

Print jobs do not print

The problem is solved. Go to step 2.

a From the document you are trying to print, open the Print dialog and

check if you have selected the correct printer.

Do the jobs print?

Actions Yes No · Action Yes No · Step 1

Page 156 of the Lexmark MS310DN user manual — Jammed pages are not reprinted
Page 156 · click to enlarge
Page 156

The problem is solved. Go to step 3.

a Check if the printer is plugged in and turned on, and if the printer

control panel light sequence matches the light sequence in the following illustration:

‑ On b Resend the print job.

Do the jobs print?

The problem is solved. Go to step 4.

If printer control panel light sequence indicates an error, then clear the message. For more information on printer control panel error light sequences, see “Understanding the printer messages” on page 110.

Do the jobs print?

The problem is solved. Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if the

cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved. Go to step 6.

a Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

Show 6 more labels / short text on this page
Action Yes No · Step 2 · Ready · Step 3 · Step 4 · Step 5
Page 157 of the Lexmark MS310DN user manual — Print job takes longer than expected
Page 157 · click to enlarge
Page 157

The problem is solved. Contact customer support.

a Remove and reinstall the printer software. For more information, see

“Installing the printer software” on page 19.

Do the jobs print?

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.
  • The printer speed may also be reduced when the printed output resolution is set to 1,200 dpi.

Place letter‑ or A4‑size paper in the tray, and then resend the print job.

The problem is solved. Contact customer

Does the print speed increase?

support.

Print job takes longer than expected

Go to step 2. The problem is solved.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the print job.

Does the print job still take longer than expected?

Go to step 3. The problem is solved.

From the Print Recovery menu, disable the Page Protect feature. To access the Print Recovery menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > General Settings > Print Recovery .

Does the print job still take longer than expected?

Show 6 more labels / short text on this page
Action Yes No · Step 6 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 158 of the Lexmark MS310DN user manual — Job prints from the wrong tray or on the wrong paper
Page 158 · click to enlarge
Page 158

Install additional printer memory.

The problem is solved.

From the Eco‑Mode menu, change the environmental settings. To access the Eco‑Mode menu, do either of the following:

For more information, contact customer support.

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > General Settings > Eco ‑ Mode .

Does the print job still take longer than expected?

Job prints from the wrong tray or on the wrong paper

The problem is solved. Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Does the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 3.

a From the Paper menu, set the paper size and type to match the paper

loaded in the tray. To access the Paper menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. b Resend the print job.

Does the job print from the correct tray or on the correct paper?

Show 5 more labels / short text on this page
Action Yes No · Step 3 · Actions Yes No · Step 1 · Step 2
Page 159 of the Lexmark MS310DN user manual — Tray linking does not work
Page 159 · click to enlarge
Page 159

The problem is solved. Contact customer support.

a Depending on your operating system, open Printing Preferences or

the Print dialog, and then specify the paper type. b Resend the print job.

Does the job print from the correct tray or on the correct paper?

Incorrect characters print

Turn off the printer, and then turn it back on to deactivate Hex Trace mode.

Go to step 2.

Check if the printer control panel light sequence matches the light sequence in the following illustration:

Do both light sequences match?

Contact customer support.

The problem is solved.

a Open a Web browser, and then type the printer IP address in the

address field. b Click Settings > Network/Ports, and then click Standard Network or

Network [x]. c Select PCL SmartSwitch or PS SmartSwitch, and then click Submit. d Resend the print job.

Do incorrect characters print?

Tray linking does not work

Show 7 more labels / short text on this page
Actions Yes No · Step 3 · Action Yes No · Step 1 · Hex Trace · ‑ Slowly blinking · Step 2
Page 160 of the Lexmark MS310DN user manual — Large jobs do not collate
Page 160 · click to enlarge
Page 160

a From the Paper menu, set the paper size and type to match the paper

The problem is solved. Contact customer support.

loaded in the trays to be linked. To access the Paper menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Do the trays link correctly?

Large jobs do not collate

The problem is solved. Go to step 2.

a From the Finishing menu, set Collate to On. To access the Finishing

menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Print Settings > Finishing Menu .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. b Resend the print job.

Does the job print and collate correctly?

The problem is solved. Go to step 3.

a From the printer software, set Collate to On.

Does the job print and collate correctly?

Show 4 more labels / short text on this page
Action Yes No · Action Yes No · Step 1 · Step 2
Page 161 of the Lexmark MS310DN user manual — Printer is printing blank pages
Page 161 · click to enlarge
Page 161

The problem is solved. Contact customer support.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Does the job print and collate correctly?

Unexpected page breaks occur

Step 1 From the Setup menu, adjust the print timeout setting. To access the Setup menu, do either of the following:

The problem is solved. Go to step 2.

  • If the printer is on a network, then access the Embedded Web Server: a Open a Web browser, and then type the printer IP address in the

address field.

Settings > General Settings > Timeouts > adjust the print timeout setting > Submit • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh.

Does the file print correctly?

The problem is solved. Contact customer support.

a Check the original file for manual page breaks. b Resend the print job.

Does the file print correctly?

Print quality problems

Printer is printing blank pages

Show 4 more labels / short text on this page
Action Yes No · Step 3 · Action Yes No · Step 2
Page 162 of the Lexmark MS310DN user manual — Clipped pages or images
Page 162 · click to enlarge
Page 162

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer still printing blank pages?

Clipped pages or images

ABCDE ABCDE ABCDE

Show 6 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Leading edge · Trailing edge
Page 163 of the Lexmark MS310DN user manual — Clipped pages or images
Page 163 · click to enlarge
Page 163

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the paper loaded. b Resend the print job.

Is the page or image clipped?

Go to step 3. Do one or more of the following:

From the Paper menu, set the paper size and type to match the paper loaded in the tray. To access the Paper menu, do either of the following:

  • Specify the correct paper size and type from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size and type specified in the tray settings.
  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Paper Menu .

Do the paper size and type settings match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size and type

from Printing Preferences or the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 164 of the Lexmark MS310DN user manual — Gray background on prints
Page 164 · click to enlarge
Page 164

Shadow images appear on prints

Lexmark MS310DN — Shadow images appear on prints diagram (page 164)
Fig. 78 · Shadow images appear on prints

ABCD

Go to step 2. Load paper with the correct paper type and weight in the tray.

Check if the paper loaded in the tray has the correct paper type and weight.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the Paper menu, set the paper size and type to match the paper loaded in the tray. To access the Paper menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Paper Menu .

Do the paper type and weight settings match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or the Print dialog. b Resend the print job.

Do shadow images still appear on the prints?

Step 4 Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Do shadow images still appear on the prints?

Gray background on prints

ABCDE

ABCDE ABCDE

Show 8 more labels / short text on this page
Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Leading edge · Trailing edge
Page 165 of the Lexmark MS310DN user manual — Incorrect margins on prints
Page 165 · click to enlarge
Page 165

The problem is solved. Go to step 2.

a From the Quality menu, select a lower number to reduce the toner

density. To access the Quality menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Print Settings > Quality Menu .

Does the gray background disappear from the prints?

The problem is solved. Contact customer support.

Reinstall the imaging unit and the toner cartridge.

a Remove the toner cartridge. b Remove the imaging unit.

Does the gray background disappear from the prints?

Incorrect margins on prints

ABCD ABCD ABCD

The problem is solved. Go to step 2.

a Move the width and length guides in the tray to the correct positions

for the paper size loaded. b Resend the print job.

Are the margins correct?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 166 of the Lexmark MS310DN user manual — Paper curl
Page 166 · click to enlarge
Page 166

Go to step 3. Do one or more of the following:

From the Paper menu, check if the paper size setting matches the paper loaded in the tray. To access the Paper menu, do either of the following:

  • Change the paper size setting to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size setting.
  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Paper Menu .

Does the paper size setting match the paper loaded in the tray?

The problem is solved. Contact customer support.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the Paper menu, set the paper size and type to match the paper loaded in the tray. To access the Paper menu, try one or more of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then, navigate to Settings > Paper Menu .

Do the paper type and weight match the type and weight of the paper in the tray?

Show 6 more labels / short text on this page
Action Yes No · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 167 of the Lexmark MS310DN user manual — Print irregularities
Page 167 · click to enlarge
Page 167
Lexmark MS310DN — Print irregularities diagram (page 167)
Fig. 79 · Print irregularities

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Print irregularities

Lexmark MS310DN — Print irregularities diagram (page 167)
Fig. 80 · Print irregularities

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded in the tray. b Resend the print job.

Page 168 of the Lexmark MS310DN user manual — Print irregularities
Page 168 · click to enlarge
Page 168

Go to step 3. Specify the correct paper type and weight to match the paper loaded in the tray.

From the Paper menu, set the paper size and type to match the paper loaded in the tray. To access the Paper menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or the Print dialog. b Resend the print job.

Do print irregularities still appear?

Action Yes No · Step 2 · Step 3

Page 169 of the Lexmark MS310DN user manual — Print irregularities
Page 169 · click to enlarge
Page 169

From the Paper Texture menu, change the texture settings. To access the Paper Texture menu, do either of the following:

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu > Paper Texture .

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Step 6 Replace the imaging unit, and then resend the print job.

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Do print irregularities still appear?

Action Yes No · Step 4 · Step 5

Page 170 of the Lexmark MS310DN user manual — Print is too dark
Page 170 · click to enlarge
Page 170

Repeating defects appear on prints

Go to step 2. 1 Check if the distance between the defects equal to 80 mm (3.15 in.) 2 Take note of the distance, and then contact customer support at http://support.le xmark.com or your service representative.

Measure the distance between the defects.

Check for a distance between the defects that equals:

  • 97 mm (3.82 in.)
  • 47 mm (1.85 in.)
  • 38 mm (1.5 in.)

Is the distance between defects equal to one of the listed measurements?

Contact customer support at http://support.lexma rk.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do the repeating defects still appear?

Print is too dark

ABC DEF ABC DEF

Action Yes No · Step 1 · Step 2

Page 171 of the Lexmark MS310DN user manual — Repeating defects appear on prints
Page 171 · click to enlarge
Page 171

Go to step 2. The problem is solved.

a From the Quality menu, reduce the toner darkness. To access the

Quality menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Printer Settings > Quality Menu .

Is the print still too dark?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

a From the Paper Menu, check if the paper type, texture, and weight

match the paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. b Resend the print job.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or the Print dialog. b Resend the print job.

Is the print still too dark?

Show 4 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3
Page 172 of the Lexmark MS310DN user manual — Repeating defects appear on prints
Page 172 · click to enlarge
Page 172

From the Paper Texture menu, change the texture settings to match the paper you are printing on. To access the Paper Texture menu, do either of the following:

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu > Paper Texture .

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Show 4 more labels / short text on this page
Action Yes No · Step 4 · Step 5 · Step 6
Page 173 of the Lexmark MS310DN user manual — Print is too light
Page 173 · click to enlarge
Page 173

Print is too light

ABC DEF

Go to step 2. The problem is solved.

a From the Quality menu, increase the toner darkness. To access the

Quality menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Printer Settings > Quality Menu .

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

a From the Paper Menu, check if the paper type, texture, and weight

match the paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. b Resend the print job.

Is the tray set to the type and weight of the paper loaded?

Action Yes No · Step 1 · Step 2

Page 174 of the Lexmark MS310DN user manual — Print is too light
Page 174 · click to enlarge
Page 174

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or the Print dialog. b Resend the print job.

Is the print still too light?

From the Paper Texture menu, change the texture settings to match the paper you are printing on. To access the Paper Texture menu, do either of the following:

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu > Paper Texture .

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Show 4 more labels / short text on this page
Action Yes No · Step 3 · Step 4 · Step 5
Page 175 of the Lexmark MS310DN user manual — Skewed print
Page 175 · click to enlarge
Page 175

Go to step 7. The problem is solved.

a Shake the imaging unit to redistribute the toner.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Skewed print

) ) ABCDE

ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the tray. b Resend the print job.

Is the print still skewed?

Show 6 more labels / short text on this page
Action Yes No · Step 6 · Step 7 · Action Yes No · Step 1 · Step 2
Page 176 of the Lexmark MS310DN user manual — Transparency print quality is poor
Page 176 · click to enlarge
Page 176

Printer is printing solid black pages

Go to step 2. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Is the printer printing solid black pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the Paper Menu, set the paper type to match the paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Is the paper type for the tray set to Transparency?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 177 of the Lexmark MS310DN user manual — Streaked horizontal lines appear on prints
Page 177 · click to enlarge
Page 177

Contact customer support.

The problem is solved.

a Check if you are using a recommended type of transparency. b Resend the print job.

Is the print quality still poor?

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder from

Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines still appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the Paper Menu, set the paper type and weight to match the paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Do the paper type and weight settings match the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked horizontal lines still appear on prints?

Show 6 more labels / short text on this page
Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 178 of the Lexmark MS310DN user manual — Streaked vertical lines appear on prints
Page 178 · click to enlarge
Page 178
Lexmark MS310DN — Streaked vertical lines appear on prints diagram (page 178)
Fig. 81 · Streaked vertical lines appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Streaked vertical lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or the Print dialog. b Resend the print job.

Do streaked vertical lines still appear on prints?

Go to step 3. Change the paper type, texture, and weight to match the paper in the tray.

From the Paper Menu, set the paper type, texture, and weight to match the paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Do the paper type, texture, and weight match the paper in the tray?

Show 5 more labels / short text on this page
Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2
Page 179 of the Lexmark MS310DN user manual — Horizontal voids appear on prints
Page 179 · click to enlarge
Page 179
Lexmark MS310DN — Horizontal voids appear on prints diagram (page 179)
Fig. 82 · Horizontal voids appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Contact customer support at http://support.lexmar k.com or your service representative.

Replace the imaging unit, and then resend the print job.

Horizontal voids appear on prints

Lexmark MS310DN — Horizontal voids appear on prints diagram (page 179)
Fig. 83 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Page 180 of the Lexmark MS310DN user manual — Vertical voids appear on prints
Page 180 · click to enlarge
Page 180
Lexmark MS310DN — Vertical voids appear on prints diagram (page 180)
Fig. 84 · Vertical voids appear on prints

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Replace the imaging unit, and then resend the print job.

Vertical voids appear on prints

Lexmark MS310DN — Vertical voids appear on prints diagram (page 180)
Fig. 85 · Vertical voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

Page 181 of the Lexmark MS310DN user manual — Toner specks appear on prints
Page 181 · click to enlarge
Page 181

Go to step 3. The problem is solved.

a From the Paper Menu, set the paper type and weight to match the

paper loaded in the tray. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. b Resend the print job.

Do vertical voids still appear on prints?

Go to step 4. The problem is solved.

Check if you are using a recommended type of paper.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Do vertical voids still appear on prints?

Contact customer support.

The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Do toner specks appear on prints?

Show 5 more labels / short text on this page
Action Yes No · Step 2 · Step 3 · Step 4 · Action Yes No
Page 182 of the Lexmark MS310DN user manual — Uneven print density
Page 182 · click to enlarge
Page 182

Toner rubs off

ABC DEF

Go to step 2. Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.

From the Paper menu on the printer control panel, check the paper type, texture, and weight. To access the Paper Menu, do either of the following:

  • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu .

Do the paper type, texture, and weight match the paper loaded in the tray?

Step 2 Resend the print job.

Contact customer support.

The problem is solved.

Does the toner still rub off?

Uneven print density

Lexmark MS310DN — Uneven print density diagram (page 182)
Fig. 86 · Uneven print density

ABCDE ABCDE ABCDE

Replace the imaging unit, and then resend the print job.

Show 4 more labels / short text on this page
Leading edge · Trailing edge · Action Yes No · Step 1
Page 183 of the Lexmark MS310DN user manual — Embedded Web Server does not open
Page 183 · click to enlarge
Page 183

Embedded Web Server does not open

The problem is solved. Go to step 2.

a Turn on the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

The problem is solved. Go to step 3.

Make sure the printer IP address is correct.

a View the printer IP address:

  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Does the Embedded Web Server open?

The problem is solved. Go to step 4.

Check if the network is working.

a Print a network setup page. b Check the first section of the network setup page and confirm that the

status is Connected.

Does the Embedded Web Server open?

The problem is solved. Go to step 5.

Check if the cable connections to the printer and print server are secure.

a Connect the cables properly. For more information, see the setup

documentation that came with the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

Show 5 more labels / short text on this page
Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 184 of the Lexmark MS310DN user manual — Contacting customer support
Page 184 · click to enlarge
Page 184

The problem is solved. Contact your system support person.

Temporarily disable the Web proxy servers.

Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server.

Does the Embedded Web Server open?

Contacting customer support

When you contact customer support, describe the problem you are experiencing, the printer control panel light sequence, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Action Yes No · Step 5

Page 185 of the Lexmark MS310DN user manual — GOVERNMENT END USERS
Page 185 · click to enlarge
Page 185

Notices

Product information

Product name:

Machine type:

Model(s):

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2013 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

Lexmark MS310d, MS310dn · 220, 230 · May 2013

Page 186 of the Lexmark MS310DN user manual — Modular component notice
Page 186 · click to enlarge
Page 186

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Modular component notice

This product may contain the following modular component(s):

Page 187 of the Lexmark MS310DN user manual — Static sensitivity notice
Page 187 · click to enlarge
Page 187

Lexmark regulatory type/model LEX-M01-005; FCC ID: IYLLEXM01005; IC:2376A-M01005

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Printing 53 dBA (one-sided); 52 dBA (two-sided)

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Static sensitivity notice

Ready N/A

Page 188 of the Lexmark MS310DN user manual — Laser advisory label
Page 188 · click to enlarge
Page 188

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient operating temperature 16°C to 32°C (60°F to 90°F)

Shipping temperature -40 to 43.3°C (-40 to 110°F)

Storage temperature and relative humidity 2 to 35°C (34 to 95°F)

8 to 80% RH

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 189 of the Lexmark MS310DN user manual — 0.0 W
Page 189 · click to enlarge
Page 189

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 520 W (one-sided); 340 W (two- sided)

Copy The product is generating hard‑copy output from hard‑copy original documents.

N/A

Scan The product is scanning hard‑copy documents. N/A

Ready The product is waiting for a print job. 8 W

Sleep Mode The product is in a high‑level energy‑saving mode. 5 W

Hibernate The product is in a low‑level energy‑saving mode. 0.5 W

Off The product is plugged into an electrical outlet, but the power switch is turned off.

0.0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Page 190 of the Lexmark MS310DN user manual — Avis de conformité aux normes de l’industrie du Canada
Page 190 · click to enlarge
Page 190

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 30 min.

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and Switzerland

Factory default value for this product in EU countries or regions and Switzerland 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Disabled

Page 191 of the Lexmark MS310DN user manual — Industry Canada (Canada)
Page 191 · click to enlarge
Page 191

日本の VCCI 規定

製品にこのマークが表示されている場合、次の要件を満たしています。

この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをしてください。

VCCI-B

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

Page 192 of the Lexmark MS310DN user manual — Notice to users in the European Union
Page 192 · click to enlarge
Page 192

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Page 193 of the Lexmark MS310DN user manual — Notice to users in the European Union
Page 193 · click to enlarge
Page 193

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

Lexmark MS310DN — Notice to users in the European Union diagram (page 193)
Fig. 87 · Notice to users in the European Union

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Page 194 of the Lexmark MS310DN user manual — Limited warranty
Page 194 · click to enlarge
Page 194

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

Page 195 of the Lexmark MS310DN user manual — Extent of limited warranty
Page 195 · click to enlarge
Page 195

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

Page 196 of the Lexmark MS310DN user manual — Patent acknowledgment
Page 196 · click to enlarge
Page 196

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

Page 197 of the Lexmark MS310DN user manual — Patent acknowledgment
Page 197 · click to enlarge
Page 197

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 199 of the Lexmark MS310DN user manual — Table of contents
Page 199 · click to enlarge
Page 199

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Page 200 of the Lexmark MS310DN user manual — Table of contents
Page 200 · click to enlarge
Page 200

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Page 201 of the Lexmark MS310DN user manual — Table of contents
Page 201 · click to enlarge
Page 201

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Page 202 of the Lexmark MS310DN user manual — Table of contents
Page 202 · click to enlarge
Page 202

Table of contents

Contentsp.2Safety informationp.5Learning about the printerp.7Finding information about the printerp.7Selecting a location for the printerp.8Printer configurationsp.9Using the printer control panelp.11Understanding the printer control panel light sequencesp.12Using the Embedded Web Serverp.15Using the Local Printer Settings Utilityp.15Additional printer setupp.17Installing hardware optionsp.17Installing optional traysp.17Attaching cablesp.18Setting up the printer softwarep.19Installing the printer softwarep.19Installing the Local Printer Settings Utilityp.20Updating available options in the printer driverp.21Networkingp.22Preparing to set up the printer on an Ethernet networkp.22Installing the printer on an Ethernet networkp.22Preparing to set up the printer on a wireless networkp.24Connecting the printer to a wireless network using the Wi-Fi Protected Setup PINp.25Connecting the printer to a wireless network using the printer softwarep.25Using the Wireless Setup Utility (Windows only)p.25Using the Wireless Setup Assistant (Macintosh only)p.27Connecting the printer to a wireless network using the Embedded Web Serverp.27Printing a menu settings and network setup pagep.28Loading paper and specialty mediap.29Setting the paper size and typep.29Configuring Universal paper settingsp.29Using the standard bin and paper stopp.30Loading traysp.30Loading the multipurpose feederp.35Linking and unlinking traysp.38Linking and unlinking traysp.38Configuring a custom paper typep.39Assigning a custom paper typep.39Paper and specialty media guidep.41Paper guidelinesp.41Paper characteristicsp.41Unacceptable paperp.42Selecting paperp.42Selecting preprinted forms and letterheadp.42Using recycled paper and other office papersp.43Using specialty mediap.44Tips on using card stockp.44Tips on using envelopesp.45Tips on using labelsp.45Tips on using letterheadp.46Tips on using transparenciesp.46Storing paperp.46Supported paper sizes, types, and weightsp.47Supported paper sizesp.47Supported paper types and weightsp.48Printingp.50Printing documentsp.50Printing a documentp.50Adjusting toner darknessp.50Printing from a mobile devicep.51Canceling a print jobp.51Canceling a print job from the computerp.51Understanding the printer menusp.53Menus listp.53Paper menup.53Default Source menup.53Paper Size/Type menup.54Configure MP menup.57Paper Texture menup.57Paper Weight menup.58Paper Loading menup.60Custom Types menup.61Network/Ports menup.61Standard USB menup.61Settings menup.63General Settings menup.63Print Settingsp.67Setup menup.67Finishing menup.68Quality menup.69PostScript menup.70PCL Emul menup.70Security menup.72Set Date and Time menup.72Saving money and the environmentp.73Saving paper and tonerp.73Using recycled paperp.73Conserving suppliesp.73Saving energyp.74Using Sleep and Hibernate modesp.74Adjusting Sleep modep.74Setting Hibernate Timeoutp.75Using Schedule Power Modesp.75Recyclingp.76Recycling Lexmark productsp.76Recycling Lexmark packagingp.76Returning Lexmark cartridges for reuse or recyclingp.77Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.79Finding printer security informationp.80Maintaining the printerp.81Cleaning the printerp.81Cleaning the printerp.81Checking the status of parts and suppliesp.81Checking the status of parts and suppliesp.81Estimated number of remaining pagesp.82Ordering suppliesp.82Using genuine Lexmark parts and suppliesp.82Ordering toner cartridgesp.82Ordering an imaging unitp.84Storing suppliesp.84Replacing suppliesp.85Replacing the toner cartridgep.85Replacing the imaging unitp.86Moving the printerp.88Before moving the printerp.88Moving the printer to another locationp.89Shipping the printerp.89Managing the printerp.90Finding advanced networking and administrator informationp.90Viewing reportsp.90Configuring supply notifications from the Embedded Web Serverp.90Copying printer settings to other printersp.91Clearing jamsp.92Avoiding jamsp.92Accessing jam areasp.93[x]-page jam, open front door. [20y.xx]p.94[x]-page jam, open rear door. [20y.xx]p.99[x]-page jam, clear standard bin. [20y.xx]p.101[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.103[x]-page jam, remove tray [x]. [24y.xx]p.106[x]-page jam, clear manual feeder. [250.xx]p.108Troubleshootingp.110Understanding the printer messagesp.110Toner cartridge messagesp.110Cartridge, imaging unit mismatch [41.xy]p.110Cartridge low [88.xx]p.111Cartridge nearly low [88.xy]p.111Cartridge very low [88.xy]p.112Non-Lexmark cartridge, see User’s Guide [33.xy]p.112Replace cartridge, 0 estimated pages remain [88.xy]p.113Replace cartridge, printer region mismatch [42.xy]p.115Reinstall missing or unresponsive cartridge [31.xy]p.116Replace unsupported cartridge [32.xy]p.118Imaging unit messagesp.119Imaging unit low [84.xy]p.119Imaging unit nearly low [84.xy]p.119Imaging unit very low [84.xy]p.120Non-Lexmark imaging unit, see User’s Guide [33.xy]p.120Replace imaging unit, 0 estimated pages remain [84.xy]p.121Reinstall missing or unresponsive imaging unit [31.xy]p.122Replace unsupported imaging unit [32.xy]p.123Paper loading messagesp.124Incorrect paper size, open [paper source] [34]p.124Load [paper source] with [custom type name] [orientation]p.125Load [paper source] with [custom type string] [orientation]p.126Load [paper source] with [paper size] [orientation]p.127Load [paper source] with [paper type] [paper size] [orientation]p.128Load Manual Feeder with [custom type name] [orientation]p.129Load Manual Feeder with [custom type string] [orientation]p.130Load Manual Feeder with [paper size] [orientation]p.131Load Manual Feeder with [paper type] [paper size] [orientation]p.132Remove paper from standard output binp.133Printer communication error messagesp.133Network [x] software error [54]p.133Standard parallel port disabled [56]p.135Standard network software error [54]p.136Rear USB port disabled [56]p.138Insufficient memory error messagesp.139Insufficient memory to collate job [37]p.139Insufficient memory to support Resource Save feature [35]p.141Memory full [38]p.142Miscellaneous messagesp.143Close front doorp.143Complex page, some data may not have printed [39]p.144PPDS font error [50]p.145Printer had to restart. Last job may be incomplete.p.147Service errorp.148Too many trays attached [58]p.149Solving printer problemsp.150Basic printer problemsp.150The printer is not respondingp.150Option problemsp.152Cannot detect internal optionp.152Tray problemsp.153Paper feed problemsp.154Paper frequently jamsp.154Paper jam message remains after jam is clearedp.154Jammed pages are not reprintedp.155Solving print problemsp.155Printing problemsp.155Print jobs do not printp.155Printing slows downp.157Print job takes longer than expectedp.157Job prints from the wrong tray or on the wrong paperp.158Incorrect characters printp.159Tray linking does not workp.159Large jobs do not collatep.160Unexpected page breaks occurp.161Print quality problemsp.161Printer is printing blank pagesp.161Clipped pages or imagesp.162Shadow images appear on printsp.164Gray background on printsp.164Incorrect margins on printsp.165Paper curlp.166Print irregularitiesp.167Repeating defects appear on printsp.170Print is too darkp.170Print is too lightp.173Skewed printp.175Printer is printing solid black pagesp.176Transparency print quality is poorp.176Streaked horizontal lines appear on printsp.177Streaked vertical lines appear on printsp.178Horizontal voids appear on printsp.179Vertical voids appear on printsp.180Toner specks appear on printsp.181Toner rubs offp.182Uneven print densityp.182Embedded Web Server does not openp.183Contacting customer supportp.184Noticesp.185Product informationp.185Edition noticep.185GOVERNMENT END USERSp.185Trademarksp.186Federal Communications Commission (FCC) compliance information statementp.186Modular component noticep.186Licensing noticesp.187Noise emission levelsp.187Waste from Electrical and Electronic Equipment (WEEE) directivep.187Product disposalp.187Static sensitivity noticep.187ENERGY STARp.188Temperature informationp.188Laser noticep.188Laser advisory labelp.188Power consumptionp.189Product power consumptionp.189Sleep Modep.190Hibernate Modep.190Off modep.190Total energy usagep.190日本の VCCI 規定p.191European Community (EC) directives conformityp.191Regulatory notices for wireless productsp.191Exposure to radio frequency radiationp.191Industry Canada (Canada)p.191Notice to users in the European Unionp.192STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.194Patent acknowledgmentp.196Indexp.198
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark MS310DN

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark MS310DN

Be the first to ask — other owners or our team will answer.

Original document

Lexmark MS310DN manual PDF

202 pages·5.6 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…