EN
Lexmark logo
Official user manual

Lexmark E460dw

182 pages·3.7 MB·Printer·PDF·ENDEFRITNLJA
Lexmark E460dw
Table of Contents 293 sections Contents · Safety information · Learning about the printer · Thank you for choosing this printer! · … ShowHide
Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 1 of the Lexmark E460dw user manual — 630, 63W, 6EW
Page 1 · click to enlarge
Page 1

Lexmark E460dn, E460dw, and E462dtn

User's Guide

January 2010 www.lexmark.com

Machine type(s):

Model(s):

630, 63W, 6EW

Page 2 of the Lexmark E460dw user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 9 of the Lexmark E460dw user manual — Safety information
Page 9 · click to enlarge
Page 9
Lexmark E460dw — Safety information diagram (page 9)
Fig. 1 · Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Use care when you replace a lithium battery.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

See the product User's Guide for additional safety information.

SAVE THESE INSTRUCTIONS.

Safety information

Page 10 of the Lexmark E460dw user manual — Finding information about the printer
Page 10 · click to enlarge
Page 10

Learning about the printer

Thank you for choosing this printer!

We've worked hard to make sure it will meet your needs.

To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.

We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Performing printing depending on your printer model • Configuring printer settings • Viewing and printing documents and photos • Setting up and using printer software • Setting up and configuring the printer on a network, depending on your printer model • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide—The User's Guide is available on the Software and Documentation CD. For updates, check our Web site at http://support.lexmark.com. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. Click to view context-sensitive information. Notes: • The Help installs automatically with the printer software. • The printer software is located in the printer Program folder or on the desktop, depending on your operating system.

Learning about the printer

Page 11 of the Lexmark E460dw user manual — Selecting a location for the printer
Page 11 · click to enlarge
Page 11
What are you looking for?Find it here The latest supplemental information, updates, and technical support: • Documentation • Driver downloads • Live chat support • E-mail support • Telephone supportLexmark Support Web site— http://support.lexmark.com Note: Select your region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your region or country can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and the back of the printer), and have it ready when you contact support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the US—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • Rest of the world—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:

Learning about the printer

Page 12 of the Lexmark E460dw user manual — Basic model
Page 12 · click to enlarge
Page 12
Lexmark E460dw — Printer configurations diagram (page 12)
Fig. 2 · Printer configurations
1Rear300 mm (12 in.) 2Right side200 mm (8 in.) 3Front300 mm (12 in.) 4Left side12.7 mm (0.5 in.) 5Top300 mm (12 in.)
Lexmark E460dw — Printer configurations diagram (page 12)
Fig. 3 · Printer configurations

Printer configurations

Basic model

The following illustration shows the printer front with its basic features or parts:

Learning about the printer

Page 13 of the Lexmark E460dw user manual — Printer configurations
Page 13 · click to enlarge
Page 13
Lexmark E460dw — Printer configurations diagram (page 13)
Fig. 4 · Printer configurations

The following illustration shows the printer back with its basic features or parts:

Learning about the printer

Page 14 of the Lexmark E460dw user manual — Printer configurations
Page 14 · click to enlarge
Page 14
Lexmark E460dw — Printer configurations diagram (page 14)
Fig. 5 · Printer configurations
Lexmark E460dw — Printer configurations diagram (page 14)
Fig. 6 · Printer configurations

Learning about the printer

Page 15 of the Lexmark E460dw user manual — Understanding the printer control panel
Page 15 · click to enlarge
Page 15

Configured models

The following illustration shows the printer configured with an optional drawer:

Lexmark E460dw — Configured models diagram (page 15)
Fig. 7 · Configured models
Lexmark E460dw — Configured models diagram (page 15)
Fig. 8 · Configured models

Understanding the printer control panel

The following diagram shows the printer control panel:

Lexmark E460dw — Understanding the printer control panel diagram (page 15)
Fig. 9 · Understanding the printer control panel

Learning about the printer

Page 16 of the Lexmark E460dw user manual — Understanding the printer control panel
Page 16 · click to enlarge
Page 16

The following diagrams and tables provide more information about the printer control panel items:

1 Menus button ( ) Opens the menus

2 Back button ( ) Returns the display to the previous screen

3 Stop button ( ) Stops all printer activity

When printing, pressing causes Stopping to appear momentarily. Then the Stopped screen appears offering a list of settings that you may select.

Learning about the printer

Item Description

Page 17 of the Lexmark E460dw user manual — Understanding the printer control panel
Page 17 · click to enlarge
Page 17
Lexmark E460dw — Understanding the printer control panel diagram (page 17)
Fig. 10 · Understanding the printer control panel
  • Off —The power is off.
  • Blinking green —The printer is warming up, processing data, or printing.
  • Solid green —The printer is on, but idle.
  • Solid red —Operator intervention is needed.
Lexmark E460dw — Understanding the printer control panel diagram (page 17)
Fig. 11 · Understanding the printer control panel

1 Display Shows messages that communicate the status of the printer or that indicate possible printer problems that must be resolved. The display is also capable of showing pictures of Show Me instructions, which show you how to perform a task like clearing a jam.

  • 2 Select button ( )
  • Opens a menu and displays the first item in the menu (called a menu item)
  • Opens a menu item and displays the available values or settings. The current user default setting is indicated by an asterisk (*).
  • Saves the displayed menu item as the new user default setting

3, 4, 5, 6 Navigation buttons Press the up or down arrow buttons to scroll through menus, menu items, or settings (also called values or options), or to scroll between screens and menu options.

Press the right or left arrow buttons to increase or decrease a value or to scroll through text that rolls to another screen.

Learning about the printer

Item Description

Page 18 of the Lexmark E460dw user manual — Using the standard exit bin and paper stop
Page 18 · click to enlarge
Page 18
Lexmark E460dw — Using the standard exit bin and paper stop diagram (page 18)
Fig. 12 · Using the standard exit bin and paper stop

1 Keypad Enter numbers or symbols if the display screen has a field that accepts these entries.

Using the standard exit bin and paper stop

The standard exit bin holds up to 150 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks. The paper stop also aids in neater stacking of the paper.

To open the paper stop, pull it so it flips forward.

Lexmark E460dw — Using the standard exit bin and paper stop diagram (page 18)
Fig. 13 · Using the standard exit bin and paper stop

Learning about the printer

Page 19 of the Lexmark E460dw user manual — Using the standard exit bin and paper stop
Page 19 · click to enlarge
Page 19
  • Do not leave the paper stop in the open position if you are printing on transparencies. Doing so may cause creases in the transparencies.
  • When moving the printer to another location, make sure the paper stop is closed.

Learning about the printer

Page 20 of the Lexmark E460dw user manual — Accessing the system board to install internal options
Page 20 · click to enlarge
Page 20

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal.

Available internal options

Memory cards

  • Printer memory
  • Flash memory
  • Fonts

Firmware cards

  • Forms and Barcode Card
  • PrintCryption TM

Accessing the system board to install internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 As you face the printer, the system board door is on the right side. Open the system board door.

Lexmark E460dw — Accessing the system board to install internal options diagram (page 20)
Fig. 14 · Accessing the system board to install internal optio…

Additional printer setup

Page 21 of the Lexmark E460dw user manual — Installing a memory card
Page 21 · click to enlarge
Page 21

2 Use the following illustration to locate the appropriate connector.

Lexmark E460dw — Installing a memory card diagram (page 21)
Fig. 15 · Installing a memory card

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Additional printer setup

Page 22 of the Lexmark E460dw user manual — Installing a memory card
Page 22 · click to enlarge
Page 22

An optional memory card can be purchased separately and attached to the system board. To install the memory card:

1 Turn the printer off.

2 Access the system board.

Lexmark E460dw — Installing a memory card diagram (page 22)
Fig. 16 · Installing a memory card

3 Unpack the memory card.

4 Align the memory card with its connector on the system board.

5 Push open the latches on both ends of the memory connector.

Lexmark E460dw — Installing a memory card diagram (page 22)
Fig. 17 · Installing a memory card

6 Push the memory card into the connector until the latches click into place.

Additional printer setup

Page 23 of the Lexmark E460dw user manual — Installing a memory card
Page 23 · click to enlarge
Page 23

It may require some force to fully seat the card.

Lexmark E460dw — Installing a memory card diagram (page 23)
Fig. 18 · Installing a memory card

7 Ensure that each latch fits over the notch on each end of the card.

8 Close the system board door.

9 Turn the printer back on.

10 Open the printers foldera Click

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printers folder opens.

11 Right-click your printer icon.

12 Click Properties.

13 Click Install Options.

14 Click Ask Printer.

15 Click OK.

16 Click OK, and then close the printers folder.

Additional printer setup

Page 24 of the Lexmark E460dw user manual — Installing a flash memory or firmware card
Page 24 · click to enlarge
Page 24

Installing a flash memory or firmware card

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Open the system board door.

Lexmark E460dw — Installing a flash memory or firmware card diagram (page 24)
Fig. 19 · Installing a flash memory or firmware card

2 Unpack the card.

Lexmark E460dw — Installing a flash memory or firmware card diagram (page 24)
Fig. 20 · Installing a flash memory or firmware card

3 Holding the card by its sides, align the card with the connector on the system board.

Additional printer setup

Page 25 of the Lexmark E460dw user manual — Installing a 250or 550-sheet drawer
Page 25 · click to enlarge
Page 25

4 Push the card firmly into place.

Lexmark E460dw — Installing hardware options diagram (page 25)
Fig. 21 · Installing hardware options
  • The entire length of the connector on the card must touch and be flush against the system board.
  • Be careful not to damage the connectors.

5 Close the system board door.

Installing hardware options

Installing a 250or 550-sheet drawer

Additional printer setup

Page 26 of the Lexmark E460dw user manual — Installing hardware options
Page 26 · click to enlarge
Page 26

An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. The printer supports one optional drawer; you can install a 250- or 550-sheet drawer.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Unpack the drawer, and remove any packing material.

2 Remove the tray from the support unit.

Lexmark E460dw — Installing hardware options diagram (page 26)
Fig. 22 · Installing hardware options

3 Remove any packing material and tape from inside the tray.

4 Insert the tray into the support unit.

5 Place the drawer in the location chosen for the printer.

1 Support unit · 2 Tray · Additional printer setup

Page 27 of the Lexmark E460dw user manual — Installing hardware options
Page 27 · click to enlarge
Page 27

6 Align the outer edges of the printer with the outer edges of the drawer, and then slowly lower the printer into place.

Lexmark E460dw — Installing hardware options diagram (page 27)
Fig. 23 · Installing hardware options

7 Turn the printer back on.

8 Open the printers foldera Click

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printers folder opens.

9 Right-click the icon of your printer.

10 Click Properties.

11 Click Install Options.

12 Click Ask Printer.

13 Click OK.

14 Click OK, and then close the printers folder.

Additional printer setup

Page 28 of the Lexmark E460dw user manual — Attaching cables
Page 28 · click to enlarge
Page 28

Attaching cables

  • 1 Connect the printer to a computer or a network.
  • For a local connection, use a USB or parallel cable.
  • For a network connection, use an Ethernet cable.

2 Connect the power cord to the printer first and then to a properly grounded wall outlet.

Lexmark E460dw — Attaching cables diagram (page 28)
Fig. 24 · Attaching cables
Lexmark E460dw — Attaching cables diagram (page 28)
Fig. 25 · Attaching cables

Additional printer setup

Page 29 of the Lexmark E460dw user manual — Printing a network setup page
Page 29 · click to enlarge
Page 29

Verifying printer setup

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.

Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Reports appears, and then press .

4 Press the up or down arrow button until Menu Settings Page appears, and then press .

After the menu settings page prints, the printer returns to the Ready state.

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Reports appears, and then press .

4 Press the up or down arrow button until Network Setup Page appears, and then press .

5 Check the first section on the network setup page, and confirm that Status is “Connected.”

If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Additional printer setup

Page 30 of the Lexmark E460dw user manual — For Windows users
Page 30 · click to enlarge
Page 30

Setting up the printer software

Installing printer software

A printer driver is software that lets the computer communicate with the printer. The printer software is typically installed during the initial printer setup.

For Windows users

1 Close all open software programs.

2 Insert the Software and Documentation CD.

3 From the main installation dialog, click Install Printer and Software.

4 Follow the instructions on the computer screen.

For Macintosh users

1 Close all open software applications.

2 Insert the Software and Documentation CD.

3 From the Finder desktop, double-click the printer CD icon that automatically appears.

4 Double-click the Install Printer and Software icon.

5 Follow the instructions on the computer screen.

Using the World Wide Web

1 Go to the Lexmark Web site at www.lexmark.com.

2 From the Drivers & Downloads menu, click Driver Finder.

3 Select your printer, and then select your operating system.

4 Download the driver and install the printer software.

Updating available options in the printer driver

Once the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.

For Windows users

1 Open the Printers foldera Click

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printer folder opens.

2 Select the printer.

3 Right-click the printer, and then select Properties.

Additional printer setup

Page 31 of the Lexmark E460dw user manual — Setting up wireless printing
Page 31 · click to enlarge
Page 31

4 Click the Install Options tab.

5 Under Available Options, add any installed hardware options.

6 Click Apply.

For Macintosh users

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax.

3 Select the printer, and then click Options & Supplies.

4 Click Driver, and then add any installed hardware options.

5 Click OK.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications.

2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.

3 Select the printer, and then from the Printers menu, choose Show Info.

4 From the pop-up menu, choose Installable Options.

5 Add any installed hardware options, and then click Apply Changes.

Setting up wireless printing

Information you will need to set up the printer on a wireless network

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode will be either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to auto for infrastructure networks.

Some ad hoc networks will also require the auto setting. Check with your system support person if you are not sure which channel to select.

Additional printer setup

Page 32 of the Lexmark E460dw user manual — Installing the printer on a wireless network (Windows)
Page 32 · click to enlarge
Page 32
  • Security Method —There are three basic options for Security Method: – WEP key

If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently in use on the network by selecting the Default WEP Transmit Key. or – WPA or WPA2 passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – No security

If your wireless network does not use any type of security, then you will not have any security information.

If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X username and password
  • Certificates

Installing the printer on a wireless network (Windows)

Before you install the printer on a wireless network, make sure that:

  • Your wireless network is set up and working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.

Lexmark E460dw — Installing the printer on a wireless network (Windows) diagram (page 32)
Fig. 26 · Installing the printer on a wireless network (Window…
Lexmark E460dw — Installing the printer on a wireless network (Windows) diagram (page 32)
Fig. 27 · Installing the printer on a wireless network (Window…

Make sure the printer and computer are fully on and ready.

Additional printer setup

Page 33 of the Lexmark E460dw user manual — Installing the printer on a wireless network (Windows)
Page 33 · click to enlarge
Page 33

Do not connect the USB cable until instructed to do so on the screen.

2 Insert the Software and Documentation CD.

3 Click Install Printer and Software.

4 Click Agree to agree to the License Agreement.

5 Click Suggested, and then click Next.

6 Click Wireless Network Attach.

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

8 Follow the instructions on the computer screen to complete the software installation.

9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer.

Additional printer setup

Page 34 of the Lexmark E460dw user manual — In Mac OS X version 10.4 and earlier
Page 34 · click to enlarge
Page 34

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Locate the printer MAC address on the sheet that shipped with the printer. Write the last six digits of the MAC address in the space provided below:

MAC address___ ___ ___ ___ ___ ___

2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the power on.

Lexmark E460dw — Prepare to configure the printer diagram (page 34)
Fig. 28 · Prepare to configure the printer

Enter the printer information

1 Access the AirPort options.

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

2 From the Network pop-up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open the Safari browser.

4 From the Bookmarks drop-down menu, select Show.

5 Under Collections, select Bonjour or Rendezvous, and then double-click the printer name.

6 From the main page of the Embedded Web Server, navigate to the page where the wireless settings information is stored.

Additional printer setup

Page 35 of the Lexmark E460dw user manual — In Mac OS X version 10.5 or later
Page 35 · click to enlarge
Page 35

Configure the printer for wireless access

1 Type the name of your network (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode if you are using a wireless router.

3 Select the type of security you use to protect your wireless network.

4 Enter the security information necessary for the printer to join your wireless network.

5 Click Submit.

6 Open the AirPort application on your computer:

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

7 From the Network pop-up menu, select your wireless network.

Configure your computer to use the printer wirelessly

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a printer in the Print Center or Printer Setup Utility.

1 Install a PPD file on the computer: a Insert the Software and Documentation CD in the CD or DVD drive. b Double-click the installer package for the printer.

c From the Welcome screen, click Continue. d Click Continue again after viewing the Readme file. e Click Continue after viewing the license agreement, and then click Agree to accept the terms of the

agreement. f Select a Destination, and then click Continue. g From the Easy Install screen, click Install. h Type the user password, and then click OK.

All necessary software is installed on the computer. i Click Close when installation is complete.

2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax.

Additional printer setup

Page 36 of the Lexmark E460dw user manual — For Windows users
Page 36 · click to enlarge
Page 36

3 Click +. 4 Select the printer from the list. 5 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Printer Setup Utility or Print Center. 4 From the Printer List, choose Add. 5 Select the printer from the list. 6 Click Add. b For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Print Center or Printer Setup Utility. 4 From the Printer List, choose Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.

Installing the printer on a wired network

These instructions apply to Ethernet and fiber optic network connections.

Before you install the printer on a wired network, make sure that:

  • You have completed the initial setup of the printer.
  • The printer is connected to your network with the appropriate type of cable.

For Windows users

1 Insert the Software and Documentation CD.

Wait for the Welcome screen to appear.

Additional printer setup

Page 37 of the Lexmark E460dw user manual — For Macintosh users
Page 37 · click to enlarge
Page 37

If the CD does not launch after a minute, then do the following:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

2 Click Install Printer and Software.

3 Click Agree to agree to the License Agreement.

4 Select Suggested, and then click Next.

5 Select Wired Network Attach, and then click Next.

6 Select the printer manufacturer from the list.

7 Select the printer model from the list, and then click Next.

8 Select the printer from the list of printers discovered on the network, and then click Finish.

9 Follow the instructions on the computer screen to complete the installation.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

2 Print the network setup page from the printer. For information on printing a network setup page, see “Printing a network setup page” on page 29.

3 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.

4 Install the drivers and add the printer. a Install a PPD file on the computer:

1 Insert the Software and Documentation CD in the CD or DVD drive. 2 Double-click the installer package for the printer. 3 From the Welcome screen, click Continue. 4 Click Continue again after viewing the Readme file. 5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement. 6 Select a Destination, and then click Continue. 7 From the Easy Install screen, click Install. 8 Type the user password, and then click OK. All the necessary software is installed on the computer. 9 Click Restart when installation is complete. b Add the printer:

  • For IP printing:

a Click · Additional printer setup

Page 38 of the Lexmark E460dw user manual — In Mac OS X version 10.4 and earlier
Page 38 · click to enlarge
Page 38

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click IP. 5 Type the IP address of your printer in the Address field. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Click IP. 6 Type the IP address of your printer in the Address field. 7 Click Add. • For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.

Additional printer setup

Page 39 of the Lexmark E460dw user manual — Check your first draft for accuracy
Page 39 · click to enlarge
Page 39
Lexmark E460dw — Minimizing your printer's environmental impact diagram (page 39)
Fig. 29 · Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see "Using Eco-Mode".

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 59.

Conserving supplies

There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:

Use both sides of the paper

If your printer model supports duplex printing, then you can control whether print appears on one or two sides of the paper by selecting 2-sided printing from the Print dialog or the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple-page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N-Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or the Lexmark Toolbar, to see what the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Minimizing your printer's environmental impact

Page 40 of the Lexmark E460dw user manual — Reducing printer noise
Page 40 · click to enlarge
Page 40

Avoid paper jams

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 123.

Saving energy

Using Eco-Mode

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Power Saver mode after one minute of inactivity.
  • When the printer enters Power Saver mode, the printer control panel display light is turned off.
  • Paper
  • Enable the automatic duplex feature (on printer models that support duplex).
  • Turn off print log features.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

Off Use factory default settings for all settings associated with Eco-Mode. This setting supports the performance specifications for your printer.

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Settings appears, and then press .

4 Press the up or down arrow button until General Settings appears, and then press .

5 Press the up or down arrow button until Eco-Mode appears, and then press .

6 Press the up or down arrow button to scroll through the list of possible settings. Press at the correct setting.

Submitting Selection appears.

Reducing printer noise

Use Quiet Mode to reduce printer noise.

Minimizing your printer's environmental impact

Choose To

Page 41 of the Lexmark E460dw user manual — Using the Embedded Web Server
Page 41 · click to enlarge
Page 41

Reduce printer noise.

  • Print jobs are processed at one-half the normal processing speed.
  • Printer engine motors do not start until a job is ready to print. There is a short delay before the first page is printed.
  • Fans run at reduced speed or are turned off.
  • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer. The fax is placed in standby mode.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer ignores the Advance Start command.

Use factory default settings. This setting supports the performance specifications for your printer.

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Settings appears, and then press .

4 Press the up or down arrow button until General Settings appears, and then press .

5 Press the up or down arrow button until Quiet Mode appears, and then press .

6 Press the up or down arrow button to scroll through the list of possible settings. Press at the correct setting.

Submitting Selection appears.

Adjusting Power Saver

Available settings range from 1–240 minutes. The factory default setting is 30 minutes.

To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings, and then click General Settings.

3 Click Timeouts.

4 In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters Power Saver mode.

5 Click Submit.

Minimizing your printer's environmental impact

Choose To · On (Text/Graphics) · Off (Image/Photo)

Page 42 of the Lexmark E460dw user manual — Recycling Lexmark packaging
Page 42 · click to enlarge
Page 42

Using the printer control panel

1 Make sure the printer is on and Ready appears.

2 Press .

3 Press the up or down arrow button until Settings appears, and then press .

4 Press the up or down arrow button until General Settings appears, and then press .

5 Press the up or down arrow button until Timeouts appears, and then press .

6 Press the up or down arrow button until Power Saver appears, and then press .

7 Press the up or down arrow button to increase or decrease the number of minutes before the printer enters Power Saver mode, and then press .

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products to Lexmark for recycling:

1 Visit our Web site at www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Minimizing your printer's environmental impact

Page 43 of the Lexmark E460dw user manual — Returning Lexmark cartridges for reuse or recycling
Page 43 · click to enlarge
Page 43

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the pre-paid shipping label. You can also:

1 Visit our Web site at www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country from the list.

3 Follow the instructions on the computer screen.

Minimizing your printer's environmental impact

Page 44 of the Lexmark E460dw user manual — Specify a unit of measure
Page 44 · click to enlarge
Page 44

Loading paper and specialty media

This section explains how to load the 250- and 550-sheet trays and the multipurpose feeder. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.

Setting the paper size and type

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Paper Menu appears, and then press .

4 Press the up or down arrow button until Paper Size/Type appears, and then press .

5 Press the up or down arrow button until the correct tray or feeder appears, and then press .

6 Press the left or right arrow button until the correct size appears, and then press .

Paper Type appears.

7 Press the left or right arrow button until the correct type appears, and then press .

Submitting selection appears. The printer returns to the Paper Size/Type menu.

Configuring Universal paper settings

The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:

  • Units of Measure (inches or millimeters)
  • Portrait Height and Width
  • Feed Direction

Specify a unit of measure

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

Paper Menu appears.

3 Press .

4 Press the up or down arrow button until Universal Setup appears, and then press .

5 Press the up or down arrow button until Units of Measure appears, and then press .

Loading paper and specialty media

Page 45 of the Lexmark E460dw user manual — Loading trays
Page 45 · click to enlarge
Page 45

6 Press the up or down arrow button until appears next to the correct unit of measure, and then press .

Submitting selection appears, followed by the Universal Setup menu.

7 Press and release until Ready appears.

Specify the paper height and width

Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.

1 From the Universal Setup menu, press the up or down arrow button until Portrait Width appears, and then press .

2 Press the left or right arrow button until the setting you want appears, and then press .

Submitting selection appears, followed by the Universal Setup menu.

3 From the Universal Setup menu, press the up or down arrow button until Portrait Height appears, and then press .

4 Press the left or right arrow button until the setting you want appears, and then press .

Submitting selection appears, followed by the Universal Setup menu.

5 Press and release until Ready appears.

Specify a feed direction

Short Edge is the factory default setting for feed direction for Universal paper settings. The Feed Direction menu appears only when both the height and width specified for the Universal paper size are set to 8.5 in (216 mm) or less. If necessary, specify whether the short or long edge of the paper enters the printer first.

1 From the Universal Setup menu, press the up or down arrow button until Feed Direction appears, and then press .

2 Press the up or down arrow button until Short Edge or Long Edge appears, and then press .

3 Press and release until Ready appears.

Loading trays

1 Pull the tray completely out.

Loading paper and specialty media

Page 46 of the Lexmark E460dw user manual — Loading trays
Page 46 · click to enlarge
Page 46
Lexmark E460dw — Loading trays diagram (page 46)
Fig. 30 · Loading trays

2 Squeeze and slide the guides to the correct position for the paper size you are loading.

Lexmark E460dw — Loading trays diagram (page 46)
Fig. 31 · Loading trays

For long paper like A4 or legal, squeeze and slide the length guide backwards to accommodate the length of paper you are loading.

Lexmark E460dw — Loading trays diagram (page 46)
Fig. 32 · Loading trays

Loading paper and specialty media

Page 47 of the Lexmark E460dw user manual — Loading trays
Page 47 · click to enlarge
Page 47

If you are loading A6-size paper:

a Squeeze and slide the length guide toward the center of the tray to the A5 size position. b Raise the A6 backstop.

  • Tray 1 accommodates only 150 sheets of A6-size paper. Notice the maximum fill line on the A6 backstop which indicates the maximum height for loading A6-size paper. Do not try to overload the tray.
  • A6-size paper cannot be loaded in Tray 2.
Lexmark E460dw — Loading trays diagram (page 47)
Fig. 33 · Loading trays

3 Flex a stack of paper back and forth to loosen the sheets, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark E460dw — Loading trays diagram (page 47)
Fig. 34 · Loading trays

4 Load the paper stack toward the back of the tray as shown with the recommended print side facedown.

Loading paper and specialty media

Page 48 of the Lexmark E460dw user manual — Loading trays
Page 48 · click to enlarge
Page 48
Lexmark E460dw — Loading trays diagram (page 48)
Fig. 35 · Loading trays

1 Maximum fill line

Load letterhead with the top edge of the sheet toward the front of the tray and the design facedown.

Lexmark E460dw — Loading trays diagram (page 48)
Fig. 36 · Loading trays

5 Squeeze and slide the guides to lightly touch the side of the stack.

Lexmark E460dw — Loading trays diagram (page 48)
Fig. 37 · Loading trays

Loading paper and specialty media

Page 49 of the Lexmark E460dw user manual — Opening the multipurpose feeder
Page 49 · click to enlarge
Page 49

6 Insert the tray.

Lexmark E460dw — Using the multipurpose feeder diagram (page 49)
Fig. 38 · Using the multipurpose feeder

7 If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper Size/Type setting from the printer control panel Paper menu.

Using the multipurpose feeder

You may want to use the multipurpose feeder when you print on different sizes and types of papers or specialty media, such as card stock, transparencies, paper labels, and envelopes. You may also want to use the multipurpose feeder for single-page print jobs on letterhead or on other specialty media you do not keep in a tray.

Opening the multipurpose feeder

1 Grasp the handle, and pull the multipurpose feeder door down.

Lexmark E460dw — Opening the multipurpose feeder diagram (page 49)
Fig. 39 · Opening the multipurpose feeder

Loading paper and specialty media

Page 50 of the Lexmark E460dw user manual — Using the multipurpose feeder
Page 50 · click to enlarge
Page 50

2 Grasp the raised handle, and pull the extension forward.

Lexmark E460dw — Using the multipurpose feeder diagram (page 50)
Fig. 40 · Using the multipurpose feeder

3 Grasp the handle, and pull the extension so it flips forward.

Lexmark E460dw — Using the multipurpose feeder diagram (page 50)
Fig. 41 · Using the multipurpose feeder

4 Guide the extension down gently so the multipurpose feeder is extended fully and open.

Lexmark E460dw — Using the multipurpose feeder diagram (page 50)
Fig. 42 · Using the multipurpose feeder

Loading paper and specialty media

Page 51 of the Lexmark E460dw user manual — Loading the multipurpose feeder
Page 51 · click to enlarge
Page 51

Loading the multipurpose feeder

1 Squeeze the tab located on the right width guide, and move the guides out fully.

Lexmark E460dw — Loading the multipurpose feeder diagram (page 51)
Fig. 43 · Loading the multipurpose feeder

2 Prepare the paper or specialty media for loading. • Flex sheets of paper or paper labels back and forth to loosen them, and then fan them. Do not fold or crease the paper or labels. Straighten the edges on a level surface.

Lexmark E460dw — Loading the multipurpose feeder diagram (page 51)
Fig. 44 · Loading the multipurpose feeder
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Lexmark E460dw — Loading the multipurpose feeder diagram (page 51)
Fig. 45 · Loading the multipurpose feeder

Loading paper and specialty media

Page 52 of the Lexmark E460dw user manual — Using the multipurpose feeder
Page 52 · click to enlarge
Page 52
  • Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

3 Load the paper or specialty media.

  • Do not force any paper into the multipurpose feeder. Overfilling may cause jams.
  • Do not exceed the maximum stack height by forcing paper or specialty media under the stack height limiters which are located on the guides.
Lexmark E460dw — Using the multipurpose feeder diagram (page 52)
Fig. 46 · Using the multipurpose feeder
  • Load paper, transparencies, and card stock with the recommended print side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging the transparencies came in.
Lexmark E460dw — Using the multipurpose feeder diagram (page 52)
Fig. 47 · Using the multipurpose feeder
Lexmark E460dw — Using the multipurpose feeder diagram (page 52)
Fig. 48 · Using the multipurpose feeder

Loading paper and specialty media

Page 53 of the Lexmark E460dw user manual — Using the multipurpose feeder
Page 53 · click to enlarge
Page 53
  • Load letterhead with the logo faceup and the top edge entering the printer first.
Lexmark E460dw — Using the multipurpose feeder diagram (page 53)
Fig. 49 · Using the multipurpose feeder
  • Load envelopes with the flap side down and the stamp location in the position shown. The stamp and address are shown to illustrate the proper orientation for loading envelopes.
Lexmark E460dw — Using the multipurpose feeder diagram (page 53)
Fig. 50 · Using the multipurpose feeder

4 Squeeze the tab located on the right width guide to adjust the guides to lightly touch the sides of the stack.

Lexmark E460dw — Using the multipurpose feeder diagram (page 53)
Fig. 51 · Using the multipurpose feeder

Loading paper and specialty media

Page 54 of the Lexmark E460dw user manual — Unlinking trays
Page 54 · click to enlarge
Page 54

5 Slide the paper gently into the multipurpose feeder until it comes to a stop. Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.

Lexmark E460dw — Linking and unlinking trays diagram (page 54)
Fig. 52 · Linking and unlinking trays

6 From the printer control panel, set the Paper Size and Paper Type.

Linking and unlinking trays

In addition to linking trays to each other, you can also link the multipurpose feeder to the trays.

Linking trays

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Size and Type settings are the same for any trays, the trays are automatically linked. The Size and Type settings for all trays must be set from the Paper menu.

Unlinking trays

Unlinked trays have settings that are not the same as the settings of any other tray. To unlink a tray using the Paper menu, change the Paper Type and Paper Size settings so that they do not match the settings of any other tray.

1 From the Paper menu, make sure the Type setting (for example, Plain Paper, letterhead, Custom Type ) for the tray you want to unlink does not match the Type setting of any other tray.

If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or assign your own custom name.

2 Make sure the Size setting (for example, letter, A4, statement) for the tray you want to unlink does not match the Size setting of any other tray.

Loading paper and specialty media

Page 55 of the Lexmark E460dw user manual — Assigning a customer paper type name to a tray
Page 55 · click to enlarge
Page 55

Creating a custom name for a paper type

If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type for each of the custom paper types that are loaded.

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Paper Menu.

4 Click Custom Name.

5 Type a name for the paper type in a Custom Name box.

6 Click Submit.

7 Click Custom Types.

Custom Types appears, followed by your custom name.

8 Select a Paper Type setting from the pick list next to your custom name.

9 Click Submit.

Assigning a customer paper type name to a tray

Assign a Custom Type name to a tray to link or unlink it. Associate the same Custom Type name to each tray that you want to link. Only trays with the same custom names assigned will link.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Paper Menu appears, and then press .

4 Press the up or down arrow button until Paper Size/Type appears, and then press .

5 Press the up or down arrow button until appears next to the name of the tray, and then press .

The Paper Size menu appears.

6 Press again.

The Paper Type menu appears.

7 Press the up or down arrow button until Custom Type <x> or another custom name appears, and then press .

Submitting selection appears, followed by Paper Menu.

8 Verify that the correct Paper Type is associated with the custom name.

Loading paper and specialty media

Page 56 of the Lexmark E460dw user manual — Creating a custom name for a paper type
Page 56 · click to enlarge
Page 56

a From the Paper menu, press the down arrow button until Custom Types appears, and then press .

b Press the down arrow button until appears next to the custom paper type name you selected in step 7 on

page 55, and then press .

c Press the down arrow button until appears next to the Paper Type setting you want, and then press .

Loading paper and specialty media

Page 57 of the Lexmark E460dw user manual — Moisture content
Page 57 · click to enlarge
Page 57

Paper and specialty media guidelines

Paper and specialty media are paper, card stock, envelopes, paper labels, and transparencies. A number of items must be considered concerning the selection of paper and specialty media before printing. This chapter provides information on making selections and caring for papers and specialty media.

It is recommended that you try a limited sample of any paper or specialty media you are considering using with the printer before purchasing large quantities.

For more information about types of paper and specialty media your printer supports, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer trays can automatically feed paper weights up to 90 g/m2 (24 lb bond) grain long paper. The multipurpose feeder can automatically feed paper weights up to 163 g/m2 (43 lb bond) grain long. Paper lighter than 60 g/m2

(16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2 (20 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 (24 lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100–300 Sheffield points; smoothness between 150–250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Paper and specialty media guidelines

Page 58 of the Lexmark E460dw user manual — Selecting paper
Page 58 · click to enlarge
Page 58

Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–90 g/m2 (16–24 lb bond) paper, grain long paper is recommended.

Fiber content

Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm (±0.9 in.), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms.
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple-part forms or documents

Selecting paper

Using appropriate paper prevents jams and helps ensure trouble-free printing.

To help avoid jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended print side. This information is usually indicated on the package.
  • Do not use paper, paper labels, or card stock that has been cut or trimmed by hand.
  • Do not mix sizes, types, or weights in the same source; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Paper and specialty media guidelines

Page 59 of the Lexmark E460dw user manual — Storing paper
Page 59 · click to enlarge
Page 59

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60–90 g/m 2 (16–24 lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket statement can be made that all recycled paper will feed well.

Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.

  • Low moisture content (4–5%)
  • Suitable smoothness (100–200 Sheffield units, or 140–350 Bendtsen units, European)
  • Note: Some much smoother papers (such as premium 24 lb laser papers, 50–90 Sheffield units) and much rougher papers (such as premium cotton papers, 200–300 Sheffield units) have been engineered to work very well in laser printers, despite surface texture. Before using these types of paper, consult your paper supplier.
  • Suitable sheet-to-sheet coefficient of friction (0.4–0.6)
  • Sufficient bending resistance in the direction of feed

Recycled paper, paper of lower weight (

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
  • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.

Paper and specialty media guidelines

Page 60 of the Lexmark E460dw user manual — Paper types and weights supported by the printer
Page 60 · click to enlarge
Page 60
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.

Supported paper sizes, types, weights, and capacities

The following tables provide information on standard and optional paper sources, the types of paper they support, and capacities.

For information on card stock and labels, see the Card Stock & Label Guide available at the Lexmark Web site at http://support.lexmark.com

Paper types and weights supported by the printer

The printer engine and the duplex path support 60–90 g/m2 (16–24 lb) paper weights. The multipurpose feeder supports 60–163 g/m2 (16–43 lb) paper weights.

Lexmark E460dw — Paper types and weights supported by the printer diagram (page 60)
Fig. 53 · Paper types and weights supported by the printer
  • Plain
  • Light
  • Heavy
  • Rough/Cotton
  • Recycled
  • Custom

Paper and specialty media guidelines

Page 61 of the Lexmark E460dw user manual — Paper sizes supported by the printer
Page 61 · click to enlarge
Page 61
Lexmark E460dw — Paper sizes supported by the printer diagram (page 61)
Fig. 54 · Paper sizes supported by the printer

1 Single-sided paper labels are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels a month. Vinyl, pharmacy, and dual-sided labels are not supported.

2 Use envelopes that lie flat when individually placed on a table facedown.

Paper sizes supported by the printer

Lexmark E460dw — Paper sizes supported by the printer diagram (page 61)
Fig. 55 · Paper sizes supported by the printer

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.8 x 8.3 in.)

A61 105 x 148 mm (4.1 x 5.8 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.)

Folio 216 x 330 mm (8.5 x 13 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.)

Legal 216 x 356 mm (8.5 x 14 in.)

Letter 216 x 279 mm (8.5 x 11 in.)

Oficio (Mexico)2 216 x 340 mm (8.5 x 13.4 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.)

1 A6 is supported only for grain long papers.

2 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

3 If a paper size you want to use is not listed, configure a Universal paper size. For more information, see “Configuring Universal paper settings” on page 44.

Paper and specialty media guidelines

Page 62 of the Lexmark E460dw user manual — Paper tray capacities
Page 62 · click to enlarge
Page 62
Lexmark E460dw — Paper tray capacities diagram (page 62)
Fig. 56 · Paper tray capacities

Universal3 76.2 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)

B5 Envelope 176 x 250 mm (6.9 x 9.8 in.)

C5 Envelope 162 x 229 mm (6.4 x 9 in.)

DL Envelope 110 x 220 mm (4.3 x 8.7 in.)

9 Envelope 98 x 225 mm (3.9 x 8.9 in.)

10 Envelope 105 x 241 mm (4.1 x 9.5 in.)

Other Envelope 216 x 356 mm (8.5 x 14 in.)

1 A6 is supported only for grain long papers.

2 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.

3 If a paper size you want to use is not listed, configure a Universal paper size. For more information, see “Configuring Universal paper settings” on page 44.

Paper tray capacities

The capacities of the trays and the multipurpose feeder are based on 75 g/m2 (20 lb) paper.

Paper and specialty media guidelines

Page 63 of the Lexmark E460dw user manual — For Macintosh users
Page 63 · click to enlarge
Page 63

Printing

This chapter covers printing, printer reports, and job cancelation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 123 and “Storing paper” on page 59.

Printing a document

Printing a document

1 Load paper into a tray or feeder.

2 From the printer control panel Paper menu, set the Paper Size/Type to match the loaded paper.

3 Send the print job:

For Windows users

a With a document open, click File Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.

For Macintosh users

a Customize the settings as needed in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop-up menus, adjust the settings as needed.

Printing

Page 64 of the Lexmark E460dw user manual — Tips on using letterhead
Page 64 · click to enlarge
Page 64

Printing on specialty media

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to load the letterhead:

Lexmark E460dw — Tips on using letterhead diagram (page 64)
Fig. 57 · Tips on using letterhead
  • Standard 250-sheet tray
  • Optional 250-sheet tray
  • Optional 550-sheet tray

The top edge of the sheet with the logo is placed at the front of the tray.

The top edge of the sheet with the logo is placed at the front of the tray.

The top edge of the sheet with the logo should enter the multipurpose feeder first.

The top edge of the sheet with the logo should enter the multipurpose feeder last.

Printing

Page 65 of the Lexmark E460dw user manual — Tips on using envelopes
Page 65 · click to enlarge
Page 65

Tips on using transparencies

Print samples on the transparencies being considered for use before buying large quantities.

When printing on transparencies:

  • Feed transparencies from the standard 250-sheet tray or the multipurpose feeder.
  • Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure transparencies are able to withstand temperatures up to 175°C (350°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • Note: Transparencies can be printed at a temperature up to 180°C (356°F) if Transparency Weight is set to Heavy and Transparency Texture is set to Rough. Select these settings using the Embedded Web Server, or from the printer control panel Paper menu.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, fan the stack to prevent sheets from sticking together.
  • We recommend Lexmark part number 70X7240 for letter-size transparencies and Lexmark part number 12A5010 for A4-size transparencies.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

When printing on envelopes:

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the envelopes can withstand temperatures up to 210°C (410°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • Note: Envelopes can be printed at a temperature up to 220°C (428°F) if Envelope Weight is set to Heavy and Envelope Texture is set to Rough. Select these settings using the Embedded Web Server, or from the printer control panel Paper menu.
  • For the best performance, use envelopes made from 90 g/m 2 (24 lb bond) paper. Use up to 105 g/m 2 (28 lb bond) weight for envelopes as long as the cotton content is 25% or less. All-cotton envelopes must not exceed 90 g/m 2 (24 lb bond) weight.
  • Use only new envelopes.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Printing

Page 66 of the Lexmark E460dw user manual — Tips on using card stock
Page 66 · click to enlarge
Page 66

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 210°C (410°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions.

  • without delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 2-mm (0.06-in.) strip on the leading and driver edge, and use a non-oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single-ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • Make sure the Paper Type is Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F) without releasing hazardous emissions.
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing

Page 67 of the Lexmark E460dw user manual — For Windows Users
Page 67 · click to enlarge
Page 67

Printing confidential and other held jobs

Holding jobs in the printer

When sending a job to the printer, you can specify that you want the printer to hold the job in memory until you start the job from the printer control panel. All print jobs that can be initiated by the user at the printer are called held jobs.

Confidential When you send a Confidential print job to the printer, you must create a PIN from the computer. The PIN must be four digits using the numbers 0–9. The job is held in printer memory until you enter the PIN from the printer control panel and choose to print or delete the job.

Verify When you send a Verify print job, the printer prints one copy and holds the remaining copies in printer memory. Verify lets you examine the first copy to see if it is satisfactory before printing the remaining copies. Once all copies are printed, the job is automatically deleted from printer memory.

Reserve When you send a Reserve print job, the printer does not print the job immediately. It stores the job in memory so you can print the job later. The job is held in memory until you delete it from the Held Jobs menu.

Repeat When you send a Repeat print job, the printer prints all requested copies of the job and stores the job in memory so you can print additional copies later. You can print additional copies as long as the job remains stored in memory.

Other types of held jobs include:

  • Profiles from various sources including Lexmark TM Document Solutions Suite (LDSS)
  • Forms from a kiosk
  • Bookmarks
  • Jobs not printed, which are called parked jobs

Printing confidential and other held jobs

For Windows Users

1 With a document open, click File Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Other Options, and then click Print and Hold.

4 Select your job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.

5 Click OK or Print, and then go to the printer to release the job.

Job type Description · Printing

Page 68 of the Lexmark E460dw user manual — For Macintosh users
Page 68 · click to enlarge
Page 68

6 From the printer control panel, press the up or down arrow button until Held jobs appears, and then press .

7 Press the up or down arrow button until appears next to your user name, and then press .

8 Press the up or down arrow button until appears next to the job type or job name, and then press .

If you selected a job name, proceed to step 11 on page 68.

9 After selecting your job type, use the keypad to enter your PIN.

If you enter an invalid PIN, the Invalid PIN screen appears.

  • To re-enter the PIN, make sure Try again appears, and then press .
  • To cancel the PIN, press the up or down arrow button until Cancel appears, and then press .

10 Press the up or down arrow button until appears next to the job you want to print, and then press .

11 Press the up or down arrow button until appears next to the number of copies you want to print, and then press .

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop-up menu, choose Job Routing.

3 Select your job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.

4 Click OK or Print, and then go to the printer to release the job.

5 From the printer control panel, press the up or down arrow button until Held jobs appears, and then press .

6 Press the up or down arrow button until appears next to your user name, and then press .

7 Press the up or down arrow button until appears next to the job type or job name, and then press .

If you selected a job name, proceed to step 10 on page 68.

8 After selecting your job type, use the keypad to enter your PIN.

If you enter an invalid PIN, the Invalid PIN screen appears.

  • To re-enter the PIN, make sure Try again appears, and then press .
  • To cancel the PIN, press the up or down arrow button until Cancel appears, and then press .

9 Press the up or down arrow button until appears next to the job you want to print, and then press .

10 Press the up or down arrow button until appears next to the number of copies you want to print, and then press .

Printing

Page 69 of the Lexmark E460dw user manual — Printing the print quality test pages
Page 69 · click to enlarge
Page 69

Printing information pages

For more information on printing information pages, see “Printing a menu settings page” on page 29 and “Printing a network setup page” on page 29.

Printing a font sample list

To print samples of the fonts currently available for your printer:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Reports appears, and then press .

4 Press the up or down arrow button until Print Fonts appears, and then press .

5 Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press .

After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the up or down arrow button until Reports appears, and then press .

4 Press the up or down arrow button until Print Directory appears, and then press .

After the directory list prints, the printer returns to the Ready state.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

1 Turn the printer off.

2 Hold down and the right arrow button while turning the printer on.

3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.

4 Press the up or down arrow button until Prt Quality Pgs appears, and then press .

The print quality test pages print.

5 Press the up or down arrow button until Exit Config Menu appears, and then press .

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Printing

Page 70 of the Lexmark E460dw user manual — For Macintosh users
Page 70 · click to enlarge
Page 70

Canceling a print job

Canceling a print job from the printer control panel

If the job is formatting or already printing, and Cancel a job appears on the first line of the display:

1 Press the up or down arrow button until Cancel appears.

A list of jobs appears.

2 Press the up or down arrow button until appears next to the job you want to cancel, and then press .

arrow button until Cancel a job appears, and then press .

Canceling a print job from the computer

For Windows users

1 Open the printers foldera Click

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK. The printers folder opens.

2 Double-click the printer icon.

3 Select the job to cancel.

4 From the keyboard, press Delete.

From the Windows taskbar:

When you send a job to print, a small printer icon appears in the right corner of the taskbar.

1 Double-click the printer icon.

A list of print jobs appears in the printer window.

2 Select a job to cancel.

3 From the keyboard, press Delete.

For Macintosh users

In Mac OS X version 10.5 or later:

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax, and then double-click the printer icon.

3 From the printer window, select the job to cancel.

4 From the icon bar at the top of the window, click the Delete icon.

Printing

Page 71 of the Lexmark E460dw user manual — Canceling a print job
Page 71 · click to enlarge
Page 71

In Mac OS X version 10.4 and earlier:

1 From the Go menu, choose Applications.

2 Double-click Utilities, and then double-click Printer Setup Utility or Print Center.

3 Double-click the printer icon.

4 From the printer window, select the job to cancel.

5 From the icon bar at the top of the window, click the Delete icon.

Printing

Page 72 of the Lexmark E460dw user manual — Understanding printer menus
Page 72 · click to enlarge
Page 72

Understanding printer menus

Menus list

Paper Menu Reports Network/Ports

Show 40 more labels / short text on this page
Default Source · Menu Settings Page · Active NIC · Paper Size/Type · Device Statistics · Standard Network Menu · Configure MP · Network Setup Page · Standard USB Menu · Substitute Size · Wireless Setup Page · Parallel Menu · Paper Texture · Profiles List · SMTP Setup Menu · Paper Weight · Netware Setup Page · Paper Loading · Print Fonts · Custom Types · Print Directory · Universal Setup · Asset Report · Security Settings · Miscellaneous · General Settings · Confidential Print · Setup Menu · Security Audit Log · Finishing Menu · Set Date/Time · Quality Menu · Utilities Menu · XPS Menu · PDF Menu · PostScript Menu · PCL Emul Menu · HTML Menu · Image Menu · Understanding printer menus
Page 73 of the Lexmark E460dw user manual — Paper Size/Type menu
Page 73 · click to enlarge
Page 73

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray MP Feeder Manual Paper Manual Env

  • From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu setting.
  • Tray 1 is the factory default setting.
  • Only an installed paper source will appear as a menu setting.
  • A paper source selected by a print job will override the Default Source setting for the duration of the print job.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray.

Paper Size/Type menu

Specifies the paper size loaded in each tray

A4 A5 A6 JIS B5 Executive Folio Legal Letter Oficio (Mexico) Statement Universal

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. The multipurpose feeder may also be linked. When one tray is empty, the job prints using paper from the linked tray.
  • The A6 paper size is supported only in Tray 1 and the multipurpose feeder.
Show 5 more labels / short text on this page
Menu item Description · Default Source · Menu item Description · Tray <x> Size · Understanding printer menus
Page 74 of the Lexmark E460dw user manual — Paper menu
Page 74 · click to enlarge
Page 74

Specifies the type of paper loaded in each tray

Plain Paper Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

  • Plain Paper is the factory default setting for Tray 1. Custom Type <x> is the factory default setting for all other trays.
  • If available, a user-defined name will appear instead of Custom Type <x>.
  • Use this menu item to configure automatic tray linking.

Specifies the size of the paper being manually loaded in the multipurpose feeder

A4 A5 A6 Executive Folio JIS B5 Legal Letter Oficio (Mexico) Statement Universal

Specifies the type of paper being manually loaded in the multipurpose feeder

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

  • Plain Paper is the factory default setting.
  • From the Paper menu, Configure MP must be set to Manual in order for Manual Paper to appear as a menu item.
Show 5 more labels / short text on this page
Menu item Description · Tray <x> Type · Manual Paper Size · Manual Paper Type · Understanding printer menus
Page 75 of the Lexmark E460dw user manual — Paper menu
Page 75 · click to enlarge
Page 75

Specifies the paper size loaded in the multipurpose feeder

A4 A5 A6 Executive Folio JIS B5 Legal Letter Oficio (Mexico) Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope C5 Envelope B5 Envelope DL Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • The menu item applies only when the multipurpose feeder (MP Feeder) is configured for Cassette. From the Paper menu, Configure MP must be set to Cassette.
  • The multipurpose feeder does not automatically sense paper size. The paper size value must be set.

Specifies the type of paper loaded in the multipurpose feeder

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

  • Plain Paper is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu item.

Specifies the size of the envelope being manually loaded in the multipurpose feeder

7 3/4 Envelope 9 Envelope 10 Envelope C5 Envelope B5 Envelope DL Envelope Other Envelope

Show 5 more labels / short text on this page
Menu item Description · MP Feeder Size · MP Feeder Type · Manual Env Size · Understanding printer menus
Page 76 of the Lexmark E460dw user manual — Paper Texture menu
Page 76 · click to enlarge
Page 76

Specifies the type of envelope being manually loaded in the multipurpose feeder.

Envelope Custom Type

Configure MP menu

Determines when the printer selects paper from the multipurpose feeder

  • Cassette is the factory default setting.
  • The Cassette setting configures the multipurpose feeder as an automatic paper source.
  • When Manual is selected, the multipurpose feeder can be used only for manual feed print jobs.

Substitute Size menu

Substitutes a specified paper size if the requested paper size is not available

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • The Off setting indicates no size substitutions are allowed.
  • Setting a substitution lets the job print without a Change Paper message appearing.

Paper Texture menu

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the card stock loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.
Show 13 more labels / short text on this page
Menu item Description · Manual Env Type · Menu item Description · Configure MP · Cassette Manual · Menu item Description · Substitute Size · Menu item Description · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Understanding printer menus
Page 77 of the Lexmark E460dw user manual — Configure MP menu
Page 77 · click to enlarge
Page 77

Specifies the relative texture of the transparencies loaded in a specific tray

Specifies the relative texture of the recycled paper loaded in a specific tray

Specifies the relative texture of the labels loaded in a specific tray

Specifies the relative texture of the bond paper loaded in a specific tray

Specifies the relative texture of the envelopes loaded in a specific tray

Specifies the relative texture of the envelopes loaded in a specific tray

Specifies the relative texture of the letterhead paper loaded in a specific tray

Specifies the relative texture of the preprinted paper loaded in a specific tray

Specifies the relative texture of the colored paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Show 24 more labels / short text on this page
Menu item Description · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Understanding printer menus
Page 78 of the Lexmark E460dw user manual — Paper Weight menu
Page 78 · click to enlarge
Page 78

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the custom paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Paper Weight menu

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the card stock loaded in a specific tray

Specifies the relative weight of the transparencies loaded in a specific tray

Specifies the relative weight of the recycled paper loaded in a specific tray

Specifies the relative weight of the labels loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the envelopes loaded in a specific tray

Show 21 more labels / short text on this page
Menu item Description · Rough/Cotton Texture · Rough · Custom <x> Texture · Smooth Normal Rough · Menu item Description · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Understanding printer menus
Page 79 of the Lexmark E460dw user manual — Paper Loading menu
Page 79 · click to enlarge
Page 79

Specifies the relative weight of the rough envelopes loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the custom paper type loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Paper Loading menu

Determines whether 2-sided printing occurs for all jobs that specify Recycled as the paper type

  • Duplex sets the printer default to 2-sided printing for every print job unless 1-sided printing is selected from Print Properties.
  • If Duplex is selected, all print jobs are sent through the duplex unit, including 1-sided jobs.
Show 21 more labels / short text on this page
Menu item Description · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Light Normal Heavy · Custom <x> Weight · Light Normal Heavy · Menu item Description · Recycled Loading · Duplex Off · Understanding printer menus
Page 80 of the Lexmark E460dw user manual — Custom Types menu
Page 80 · click to enlarge
Page 80

Determines whether 2-sided printing occurs for all jobs that specify Bond as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Letterhead as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Preprinted as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Colored as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Light as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Heavy as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Custom as the paper type

  • Off is the factory default setting.
  • Custom <x> Loading is available only if the custom type is supported.
  • Duplex sets the printer default to 2-sided printing for every print job unless 1-sided printing is selected from Print Properties.
  • If Duplex is selected, all print jobs are sent through the duplex unit, including 1-sided jobs.

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type <x> name or a user-defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional. This user-defined name displays instead of Custom Type <x>.

Paper Card Stock Transparency Labels Envelope Rough/Cotton

  • Paper is the factory default setting for the Custom Type.
  • The custom media type must be supported by the selected tray or feeder in order for you to print from that source.
Show 18 more labels / short text on this page
Menu item Description · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off · Heavy Loading · Duplex Off · Custom <x> Loading · Duplex Off · Menu item Description · Custom Type <x> · Understanding printer menus
Page 81 of the Lexmark E460dw user manual — Universal Setup menu
Page 81 · click to enlarge
Page 81

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Labels Envelope Cotton

  • Paper is the factory default setting.
  • The Recycled type must be supported by the selected tray or feeder in order for you to print from that source.

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Identifies the units of measure

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Sets the portrait width

3–14.17 inches 76–360 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Sets the portrait height

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Specifies the feed direction

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray.
Show 9 more labels / short text on this page
Menu item Description · Recycled · Menu item Description · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction · Understanding printer menus
Page 82 of the Lexmark E460dw user manual — Reports menu
Page 82 · click to enlarge
Page 82

Reports menu

Reports menu

To print a report, use the arrow buttons to navigate to the type of report you want, and then press .

Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information

Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages

Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

Network <x> Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

  • This menu item is available when more than one network option is installed.
  • This menu item appears only for network printers or printers connected to print servers.

Wireless Setup Page Prints a report containing information about the wireless network printer settings, such as the TCP/IP address information

  • This menu item is available on the wireless printer model.
  • This menu item appears only for network printers or printers connected to print servers.

Profiles List Prints a list of profiles stored in the printer

NetWare Setup Page Prints a report containing NetWare-specific information about the network settings

Prints a report in English of all the fonts available for the printer language currently set in the printer

PCL Fonts PostScript Fonts

Menu item Description · Print Fonts · Understanding printer menus

Page 83 of the Lexmark E460dw user manual — Standard Network or Network <x> menus
Page 83 · click to enlarge
Page 83

Print Directory Prints a list of all the resources stored on an optional flash memory card

  • Job Buffer Size must be set to 100%.
  • The optional flash memory must be installed correctly and working properly.

Asset Report Prints a report containing asset information including the printer serial number and model name. The report contains text and UPC barcodes that can be scanned into an asset database.

Network/Ports menu

Active NIC menu

Auto

  • Auto is the factory default setting.
  • This menu item appears only if an optional network card is installed.

Standard Network or Network <x> menus

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Show 9 more labels / short text on this page
Menu item Description · Menu item Description · Active NIC · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · Understanding printer menus
Page 84 of the Lexmark E460dw user manual — Network/Ports menu
Page 84 · click to enlarge
Page 84

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the network input buffer

Auto 3K to

  • Auto is the factory default setting.
  • The value can be changed in 1K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

For descriptions and settings of the network setup menus, see the following:

Reports Network Card TCP/IP IPv6 Wireless AppleTalk NetWare LexLink

  • “Reports menu (under the Network/Ports menu)” on page 85
  • “Network Card menu” on page 85
  • “TCP/IP menu” on page 86
  • “IPv6 menu” on page 87
  • “Wireless menu” on page 87
  • “AppleTalk menu” on page 88
  • “NetWare menu” on page 88
  • “LexLink menu” on page 89

Reports Network Card TCP/IP IPv6 Wireless Apple Talk NetWare LexLink

Show 9 more labels / short text on this page
Menu item Description · NPA Mode · Off Auto · Network Buffer · Mac Binary PS · On Off Auto · Std Network Setup · Net <x> Setup · Understanding printer menus
Page 85 of the Lexmark E460dw user manual — UAA LAA
Page 85 · click to enlarge
Page 85

Reports menu (under the Network/Ports menu)

The Reports menu item is available from the Network/Ports menu:

Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Reports

Prints a report containing information about the current network setup

Print NetWare Setup Page

  • The Setup Page contains information about the network printer settings, such as the TCP/IP address.
  • The NetWare Setup Page menu item appears only on models that support NetWare and shows information about NetWare settings.

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup Network Card

Lets you determine whether the Network Card is connected

View Card Speed Reflects the speed of a currently active network card

Lets you view the network addresses

UAA LAA

Sets the amount of time in seconds that a network print job can take before it is canceled

  • 90 seconds is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value of 1–9 is selected, the setting is saved as 10.

Allows the printer to print a banner page

Show 11 more labels / short text on this page
Menu item Description · Print Setup Page · Menu item Description · View Card Status · Connected Disconnected · Network Address · Job Timeout · 0-225 seconds · Banner Page · On Off · Understanding printer menus
Page 86 of the Lexmark E460dw user manual — TCP/IP menu
Page 86 · click to enlarge
Page 86

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup TCP/IP

View Hostname Lets you view the current TCP/IP hostname

IP Address Lets you view or change the current TCP/IP Address information

Netmask Lets you view or change the current TCP/IP Netmask information

Gateway Lets you view or change the current TCP/IP Gateway information

Specifies the DHCP address and parameter assignment setting

Specifies the RARP address assignment setting

Specifies the BOOTP address assignment setting

Specifies the Zero Configuration Networking setting

Enables the built-in FTP server, which allows files to be transferred to the printer

Enables the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address Lets you view or change the current WINS Server Address

DNS Server Address Lets you view or change the current DNS Server Address

Lets you view or change the current HTTPS setting

Show 19 more labels / short text on this page
Menu item Description · Activate · Activates TCP/IP · On Off · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable Auto IP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable HTTPS · Yes No · Understanding printer menus
Page 87 of the Lexmark E460dw user manual — Wireless menu
Page 87 · click to enlarge
Page 87

IPv6 menu

Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup IPv6

Enables IPv6 in the printer

Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router

View Hostname View Address

Lets you view the current setting

Enables DHCPv6 in the printer

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

This menu is available from the Network/Ports menu:

Network/Ports Network <x> Net <x> Setup Wireless

Specifies the network mode

  • Infrastructure mode lets the printer access a network using an access point.
  • Ad hoc is the factory default setting. Ad hoc mode configures the printer for wireless networking directly between it and a computer.

Specifies the wireless standard for the wireless network

802.11n 802.11b/g 802.11b/g/n

Lets you select an available network for the printer to use

View Signal Quality Lets you view the quality of the wireless connection

Show 14 more labels / short text on this page
Menu item Description · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off · Menu item Description · Network Mode · Infrastructure Ad hoc · Compatibility · Choose Network · Understanding printer menus
Page 88 of the Lexmark E460dw user manual — NetWare menu
Page 88 · click to enlarge
Page 88

View Security Mode Lets you view the encryption method for the wireless connection. “Disabled” indicates that the wireless network is not encrypted.

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup AppleTalk

Activates or deactivates AppleTalk support

View Name Shows the assigned AppleTalk name

View Address Shows the assigned AppleTalk address

Provides a list of AppleTalk zones available on the network

NetWare menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup NetWare

Activates or deactivates NetWare support

View Login Name Shows the assigned NetWare login name

Print Mode Shows the assigned NetWare print mode

Network Number Shows the assigned NetWare network number

Enables the Ethernet frame type setting

Ethernet 802.2 Ethernet 802.3 Ethernet Type II Ethernet SNAP

  • On is the factory default setting for all menu items.
  • Values for each of the Ethernet frame types are On and Off.
Show 10 more labels / short text on this page
Menu item Description · Menu item Description · Activate · On Off · Set Zone · Menu item Description · Activate · Yes No · Select SAP Frames · Understanding printer menus
Page 89 of the Lexmark E460dw user manual — USB menu
Page 89 · click to enlarge
Page 89

Reduces network traffic by allowing the transfer and acknowledgement of multiple data packets to and from the NetWare server

Specifies the NSQ/GSQ Mode setting

LexLink menu

This menu is available from the Network/Ports menu:

Network/Ports Network Menu Network Setup LexLink menu

Activates or deactivates LexLink support

View Nickname Shows the assigned LexLink nickname

USB menu

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if the PS Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch setting is Off.

Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if the PCL Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch setting is Off.
Show 14 more labels / short text on this page
Menu item Description · Packet Burst · Yes No · NSQ/GSQ Mode · Yes No · Menu item Description · Activate · On Off · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · Understanding printer menus
Page 90 of the Lexmark E460dw user manual — LexLink menu
Page 90 · click to enlarge
Page 90

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting causes the printer to restart.

Sets the size of the USB input buffer

Disabled Auto 3K to

  • Auto is the factory default setting.
  • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The USB buffer size value can be changed in 1K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel and network buffers.
  • Changing this setting causes the printer to restart.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

Sets the network address information for an external print server that is attached to the printer using a USB cable

...

Sets the netmask information for an external print server that is attached to the printer using a USB cable

...

Sets the gateway information for an external print server that is attached to the printer using a USB cable

...

Show 10 more labels / short text on this page
Menu item Description · NPA Mode · On Off Auto · USB Buffer · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway · Understanding printer menus
Page 91 of the Lexmark E460dw user manual — Parallel menu
Page 91 · click to enlarge
Page 91

Parallel menu

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
  • PCL SmartSwitch is shown only if the PostScript level is non-zero.

Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
  • PS SmartSwitch is shown only if the PostScript level is non-zero.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the parallel input buffer

Disabled Auto 3K to

  • Auto is the factory default setting.
  • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The parallel buffer size setting can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 9 more labels / short text on this page
Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Parallel Buffer · Understanding printer menus
Page 92 of the Lexmark E460dw user manual — Parallel menu
Page 92 · click to enlarge
Page 92

Enables bidirectional communication through the parallel port

  • On is the factory default setting.
  • The Off setting disables parallel port negotiation.

Specifies the parallel port protocol

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • The Standard setting tries to resolve parallel port communication problems.

Determines whether the printer honors printer hardware initialization requests from the computer

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determines whether the parallel port data is sampled on the leading or trailing edge of strobe

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.
  • ENA Address sets the network address information for an external print server that is attached to the printer using a parallel cable
  • ENA Netmask sets the netmask information for an external print server that is attached to the printer using a parallel cable
  • ENA Gateway sets the gateway information for an external print server that is attached to the printer using a parallel cable

ENA Address ENA Netmask ENA Gateway

Show 13 more labels / short text on this page
Menu item Description · Advanced Status · Off On · Protocol · Standard Fastbytes · Honor Init · On Off · Parallel Mode 2 · On Off · Mac Binary PS · On Off Auto · Parallel with ENA · Understanding printer menus
Page 93 of the Lexmark E460dw user manual — SMTP Setup menu
Page 93 · click to enlarge
Page 93

SMTP Setup menu

Use the following menu to configure the SMTP server.

Specifies SMTP server and port information

Primary SMTP Gateway Port

Secondary SMTP Gateway Port

5–30 Specifies the amount of time in seconds before the server stops trying to send the e-mail

Reply Address Specifies server information. This is a required item.

Sets the printer to use SSL for increased security when connecting to the SMTP server

  • Disabled is the factory default setting for Use SSL.
  • When the Negotiate setting is used, your SMTP server determines if SSL will be used.

Specifies the type of user authentication required for scan to e-mail privileges

None Plain (Simple) CRAM MD5 Digest MD5 NTLM Kerberos 5

None Use Device Credentials

  • The message boxes have a limitation of 512 characters.
  • None is the factory default setting for Device-Initiated E-mail and User-Initiated E-mail.

None Use Device SMTP Credentials

Show 15 more labels / short text on this page
Menu item Description · Primary SMTP Gateway · Secondary SMTP Gateway · SMTP Timeout · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device-Initiated E-mail · Specifies server information · User-Initiated E-mail · Device Userid · Device password · Kerberos 5 Realm · NTLM Domain · Understanding printer menus
Page 94 of the Lexmark E460dw user manual — Confidential Print menu
Page 94 · click to enlarge
Page 94

Security menu

Miscellaneous menu

Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out

Login failures Failure time frame Lockout time Panel Login timeout Remote Login timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1–50. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1–60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 0–60 minutes. 5 minutes is the factory default setting. 0 indicates the printer does not impose a lockout time.
  • “Panel Login Timeout” specifies how long the printer remains idle on the Home screen before automatically logging the user off. Settings range from 1–900 seconds. 300 seconds is the factory default setting.
  • “Remote Login Timeout” specifies how long the remote interface remains idle before automatically logging the user off. Settings range from 1–120 minutes.

Confidential Print menu

Limits the number of times an invalid PIN can be entered

  • Off is the factory default setting.
  • Once a limit is reached, the jobs for that user name and PIN are deleted.

Limits the amount of time a confidential job stays in the printer before it is deleted

Off 1 hour 4 hours 24 hours 1 week

Show 7 more labels / short text on this page
Menu item Description · Login Restrictions · Menu item Description · Max Invalid PIN · Off 2–10 · Job Expiration · Understanding printer menus
Page 95 of the Lexmark E460dw user manual — Security Audit Log menu
Page 95 · click to enlarge
Page 95

Security Audit Log menu

Export Log Enables an authorized user to export the security log

  • To export the log from the printer control panel, a flash drive must be attached to the printer.
  • From the Embedded Web Server, the log can be downloaded to a computer.

Specifies whether audit reports of print jobs are deleted

Delete now Do not delete

Specifies whether and how the audit logs of print jobs are created:

  • Enable Audit determines if the printer records events in the secure audit log and in the remote syslog.
  • Enable Remote Syslog determines if the printer sends logged events to a remote server.
  • Remote Syslog Facility determines the facility value that the printer uses when sending events to the remote syslog server.
  • “Severity of events to log” specifies how critical a logged event is. With this log activated, the printer logs each event with a severity value equal to or less than the setting value.

Yes No Enable Remote Syslog

No Yes Remote Syslog Facility 0–23 Severity of events to log

0 is Emergency 1 is Alert 2 is Critical 3 is Error 4 is Warning 5 is Notice 6 is Informational 7 is Debug

  • Yes is the factory default setting for Enable Audit.
  • No is the factory default setting for Enable Remote Syslog. If Enable Audit is set to No, then no records are sent to the remote syslog even if Enable Remote Syslog is set to Yes.
  • 4 - Security is the factory default setting for Remote Syslog Facility.
  • 4 is the factory default setting for Severity of events to log.
Show 5 more labels / short text on this page
Menu item Description · Delete Log · Configure Log · Enable Audit · Understanding printer menus
Page 96 of the Lexmark E460dw user manual — Set Date/Time menu
Page 96 · click to enlarge
Page 96

Set Date/Time menu

View Date/Time Lets you view the current date and time settings for the printer. The format for the date and time is: YYYY-MM-DD HH:MM:

YYYY is the four-digit year MM is a two-digit month DD is a two-digit date HH is a two-digit hour MM is a two-digit minute

Set Date/Time Lets you enter the date and time

Lets you select the time zone

Sets the printer to use the applicable Daylight Saving Time (DST) start and end times associated with the printer Time Zone setting.

Enables Network Time Protocol, which synchronizes the clocks of devices on a network

Show 7 more labels / short text on this page
Menu item Description · Time Zone · Observe DST · On Off · Enable NTP · On Off · Understanding printer menus
Page 97 of the Lexmark E460dw user manual — General Settings menu
Page 97 · click to enlarge
Page 97

Settings menu

General Settings menu

Sets the language of the text appearing on the display

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimizes the use of energy, paper, or specialty media

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • The Energy setting minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Paper minimizes the amount of paper and specialty media needed for a print job by printing on both sides of the paper. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.

Reduces the amount of noise produced by the printer

  • Off is the factory default setting.
  • On configures the printer to produce as little noise as possible.
Show 6 more labels / short text on this page
Menu item Description · Display Language · Eco-Mode · Quiet Mode · Off On · Understanding printer menus
Page 98 of the Lexmark E460dw user manual — Settings menu
Page 98 · click to enlarge
Page 98

Instructs the printer to run the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the country or region select screen, the default setting becomes No.

Sets paper sizes to use the standard US sizes, which may also be used in other countries, or to use metric sizes

  • US is the factory default setting.
  • Changing this setting also changes the Units of Measurement setting in the Univeral Setup menu and the default size value for each paper source (tray or feeder) in the Paper Size/Type menu.

Sets an alarm to sound when the printer requires operator intervention

  • Off is the factory default setting for Cartridge Alarm. Off means no alarm will sound. Cartridge low appears on the display.
  • Single sounds three quick beeps. 88 Cartridge is low appears on the display.

Sets the amount of time the printer waits after a job is printed before it goes into a reduced power state

  • 30 minutes is the factory default setting.
  • Lower settings conserve more energy, but may require longer warm-up times.
  • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time.

Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Show 15 more labels / short text on this page
Menu item Description · Run Initial setup · Yes No · Paper Sizes · US Metric · Alarms · Cartridge Alarm · Off Single · Timeouts · Power Saver · 1min–240 min · Timeouts · Screen Timeout · 15 sec–300 sec · Understanding printer menus
Page 99 of the Lexmark E460dw user manual — Settings menu
Page 99 · click to enlarge
Page 99

Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job

Disabled 1 sec–255 sec

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs. For more information on PPDS emulation, see the Technical Reference available on the Lexmark Web site at <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> .

Sets the amount of time in seconds the printer waits for additional data before canceling a print job

Disabled 15 sec–65535 sec

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs.

Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period

Disabled 5 sec –255 sec

Specifies whether the printer reprints jammed pages

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.
Show 14 more labels / short text on this page
Menu item Description · Timeouts · Print Timeout · Timeouts · Wait Timeout · Print Recovery · Auto Continue · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Page Protect · Off On · Understanding printer menus
Page 100 of the Lexmark E460dw user manual — Setup menu
Page 100 · click to enlarge
Page 100

Returns the printer settings to the factory default settings

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user-defined settings.
  • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory are not affected.

Sets a pre-configured or customized message to appear on the display beside Ready

Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1

  • Off is the factory default setting.
  • IP address and Hostname are pre-configured messages.
  • Contact Name, Location, Zero Configuration Name, and Custom Text 1 are messages that can be customized by a system support person.

Setup menu

Sets the default printer language

PCL Emulation PS Emulation

  • PCL emulation uses a PCL interpreter for processing print jobs. PostScript emulation uses a PS interpreter for processing print jobs.
  • PCL is the factory default printer language.
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Sets the logical and physical printable area

  • This menu does not appear if Edge to Edge is enabled in the printer Setup menu.
  • Normal is the factory default setting. When attempting to print data in the non-printable area defined by the Normal setting, the printer clips the image at the boundary.
  • The Whole Page setting allows the image to be moved into the non-printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary.
  • The Whole Page setting affects only pages printed using a PCL 5e interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreter.
Show 8 more labels / short text on this page
Menu item Description · Factory Defaults · Custom Home Message · Menu item Description · Printer Language · Print Area · Normal Whole Page · Understanding printer menus
Page 101 of the Lexmark E460dw user manual — Finishing menu
Page 101 · click to enlarge
Page 101

Sets the storage location for downloads

  • RAM is the factory default setting.
  • Storing downloads in flash memory places them in permanent storage. Downloads remain in flash memory even when the printer is turned off.
  • Storing downloads in RAM is temporary.
  • This menu appears only if optional flash memory is installed.

Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available

  • Off is the factory default setting. Off sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • The On setting retains the downloads during language changes and printer resets. If the printer runs out of memory, 38 Memory full appears, and downloads are not deleted.

Specifies the order in which held and confidential jobs are printed when Print All is selected

Alphabetically Newest First Oldest First

  • Alphabetically is the factory default setting.
  • Print jobs always appear in alphabetical order on the printer control panel.

Finishing menu

Specifies whether duplex (2-sided) printing is set as the default for all print jobs

2 sided 1 sided

  • 1 sided is the factory default setting.
  • To set 2-sided printing from the software program: for Windows users, click File Print , and then click Properties , Preferences , Options , or Setup ; for Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop-up menus.
Show 9 more labels / short text on this page
Menu item Description · Download Target · RAM Flash · Resource Save · On Off · Print All Order · Menu item Description · Sides (Duplex) · Understanding printer menus
Page 102 of the Lexmark E460dw user manual — Finishing menu
Page 102 · click to enlarge
Page 102

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge specifies that binding be placed on the left edge of portrait pages and the top edge of landscape pages.
  • Short Edge specifies that binding be placed on the top edge of portrait pages and the left edge of landscape pages.

1–999 Specifies a default number of copies for each print job

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

Off (1,1,1,2,2,2) On (1,2,1,2,1,2)

  • Off is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.
  • Both settings print the entire job the number of times specified by the Copies menu setting.

Specifies whether blank separator sheets are inserted

None Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, a blank page is inserted between each set of printed pages, such as after all page 1s and after all page 2s.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray Multi-Purpose Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Multi-Purpose Feeder to appear as a menu setting.
Show 8 more labels / short text on this page
Menu item Description · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Separator Source · Understanding printer menus
Page 103 of the Lexmark E460dw user manual — Quality menu
Page 103 · click to enlarge
Page 103

Specifies that multiple-page images be printed on one side of a sheet of paper

Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specifies the positioning of multiple-page images when using N-up (pages-sides)

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of images and whether the images are in portrait or landscape orientation.

Specifies the orientation of a multiple-page sheet

  • Auto is the factory default setting. The printer chooses between portrait and landscape.
  • Landscape uses Long Edge.
  • Portrait uses Short Edge.

Prints a border around each page image when using N-up (pages-sides)

Quality menu

Specifies the printed output resolution

300 dpi 600 dpi 1200 dpi 1200 IQ 2400 IQ

1–10 Lightens or darkens the printed output

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
Show 11 more labels / short text on this page
Menu item Description · N-up (pages-side) · N-up Ordering · Orientation · Auto Landscape Portrait · N-up Border · None Solid · Menu item Description · Print Resolution · Toner Darkness · Understanding printer menus
Page 104 of the Lexmark E460dw user manual — Utilities menu
Page 104 · click to enlarge
Page 104

Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts

  • Off is the factory default setting.
  • To set Enhance Fine Lines from the software program: for Windows users, click File Print , and then click Properties , Preferences , Options , or Setup , and change the settings from the Print Quality tab; for Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop-up menus.
  • To set Enhance Fine Lines using the Embedded Web Server, type the network printer IP address in a browser window, and from Print Settings, click Quality Menu .

Automatically adjusts the contrast enhancement applied to images

Enables more pixels to print in clusters for clarity, in order to enhance pictures horizontally or vertically, or to enhance fonts

Off Fonts Horizontally Vertically Both Directions

Adjusts the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

0–5 Adjusts the contrast of printed objects

Utilities menu

Formats the flash memory. Flash memory refers to the memory added by installing an optional flash memory card in the printer.

  • An optional flash memory card must be installed in the printer and operating properly for this menu item to be available. The flash memory card must not be Read/Write or Write protected or defective.
  • No cancels the format request.
  • Yes deletes all data stored in flash memory.
Show 12 more labels / short text on this page
Menu item Description · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Pixel Boost · Brightness · Contrast · Menu item Description · Format Flash · Yes No · Understanding printer menus
Page 105 of the Lexmark E460dw user manual — PDF menu
Page 105 · click to enlarge
Page 105

Prepares the flash memory to receive new data by retrieving lost storage space

  • This setting appears only on non-APA models.
  • An optional flash memory card must be installed in the printer and operating properly for this menu item to be available. The flash memory card must not be Read/Write or Write protected or defective.
  • No cancels the defragment request.
  • Yes reformats the flash memory after transferring all downloads to regular printer memory. When formatting is complete, the downloads are loaded back into flash memory.

Assists in isolating the source of a print job problem

  • When Activate is selected, all data sent to the printer is printed in hexadecimal, and character representation and control codes are not executed.
  • To exit Hex Trace, turn the printer off or reset the printer.

Provides an estimate of the percentage coverage of black toner on a page. The estimate is printed on a separator page.

XPS menu

Prints a page containing information on errors, including XML markup errors

PDF menu

Scales page content to fit the selected paper size

Prints annotations in a PDF

Do Not Print Print

Show 15 more labels / short text on this page
Menu item Description · Defragment Flash · No Yes · Hex Trace · Activate · Coverage Estimator · Off On · Menu item Description · Print Error Pages · Off On · Menu item Description · Scale to Fit · Yes No · Annotations · Understanding printer menus
Page 106 of the Lexmark E460dw user manual — PCL Emul menu
Page 106 · click to enlarge
Page 106

PostScript menu

Prints a page containing the PostScript error

Establishes the font search order

  • Resident is the factory default setting.
  • A formatted optional flash memory card must be installed in the printer and operating properly for this menu item to be available.
  • The optional flash memory card cannot be Read/Write, Write, or password protected.
  • Job Buffer Size must not be set to 100%.

PCL Emul menu

Specifies the set of fonts available

Resident Download Flash All

  • Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
  • Download appears only if downloaded fonts exist. It shows all the fonts downloaded into RAM.
  • Flash appears only if an optional flash memory card containing fonts is installed.
  • An optional flash memory card must be properly formatted and cannot be Read/Write, Write, or password protected.
  • All shows all fonts available to any option.

Lets you view or change the setting from a selection list

Lets you view or change the setting from a selection list

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25-point increments.
Show 13 more labels / short text on this page
Menu item Description · Print PS Error · On Off · Font Priority · Resident Flash · Menu item Description · Font Source · Font Name · <list of fonts> · Symbol Set · PCL Emulation Settings · Point Size · Understanding printer menus
Page 107 of the Lexmark E460dw user manual — PostScript menu
Page 107 · click to enlarge
Page 107

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed-space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01-cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on the page

  • Portrait is the factory default setting.
  • Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international factory default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Sets the printer to print on A4-size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

Show 15 more labels / short text on this page
Menu item Description · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Understanding printer menus
Page 108 of the Lexmark E460dw user manual — PostScript menu
Page 108 · click to enlarge
Page 108

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Off None 0–199 Assign Tray

  • Off is the factory default setting.
  • None is not an available selection. It is displayed only when it is selected by the PCL 5 interpreter.
  • None ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Man Env

Lets you view the factory default setting assigned to each tray, drawer, or feeder

Multipurpose feeder default = 8 Tray 1 default = 1 Tray 2 default = 4 Tray 3 default = 5 Tray 4 default = 20 Tray 5 default = 21 Envelope default = 6 Manual paper default = 2 Manual envelope default = 3

Returns all tray, drawer, and feeder assignments to the factory default settings

Show 10 more labels / short text on this page
Menu item Description · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Def · Tray Renumber · Restore Defaults · Yes No · Understanding printer menus
Page 109 of the Lexmark E460dw user manual — HTML menu
Page 109 · click to enlarge
Page 109

HTML menu

Intl CG Times Intl Courier Intl Univers Joanna MT Letter Gothic Lubalin Gothic Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery

Sets the default font for HTML documents

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text

1–255 pt Sets the default font size for HTML documents

  • 12 pt is the factory default setting.
  • Font size can be increased in 1-point increments.

1–400% Scales the default font for HTML documents

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Sets the page orientation for HTML documents

8–255 mm Sets the page margin for HTML documents

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1-mm increments.
Show 9 more labels / short text on this page
Menu item Description · Font Name · Menu item Description · Font Size · Scale · Orientation · Portrait Landscape · Margin Size · Understanding printer menus
Page 110 of the Lexmark E460dw user manual — Image menu
Page 110 · click to enlarge
Page 110

Specifies whether to print backgrounds on HTML documents

Do Not Print Print

Image menu

Selects the optimal paper size, scaling, and orientation

  • On is the factory default setting.
  • The On setting overrides scaling and orientation settings for some images.

Inverts bi-tonal monochrome images

  • Off is the factory default setting.
  • The font size can be increased in 1-point increments.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

Show 10 more labels / short text on this page
Menu item Description · Backgrounds · Menu item Description · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Understanding printer menus
Page 111 of the Lexmark E460dw user manual — Checking the status of supplies from a network computer
Page 111 · click to enlarge
Page 111

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove all paper from the printer.

3 Dampen a clean, lint-free cloth with water.

4 Wipe only the outside of the printer.

5 Make sure all areas of the printer are dry before beginning a new print job.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

2 Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Maintaining the printer

Page 112 of the Lexmark E460dw user manual — Recommended toner cartridges and part numbers
Page 112 · click to enlarge
Page 112

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Ordering toner cartridges

When 88 Cartridge low appears or when the print becomes faded, you may be able to extend the life of the toner cartridge:

1 Remove the toner cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.

3 Reinsert the cartridge and continue printing.

Recommended toner cartridges and part numbers

Lexmark E460dw — Recommended toner cartridges and part numbers diagram (page 112)
Fig. 58 · Recommended toner cartridges and part numbers

For the Asia Pacific Region, including Australia and New Zealand

Maintaining the printer

Page 113 of the Lexmark E460dw user manual — Replacing the toner cartridge
Page 113 · click to enlarge
Page 113

Part name Lexmark Return Program Cartridge Regular cartridge

Extra High Yield Toner Cartridge E462U11L E462U21G

Ordering a photoconductor kit

The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a photoconductor kit. You can also see the status of the photoconductor kit by printing a network setup page.

Part name Part number

Ordering a maintenance kit

80 Routine maintenance needed appears on the display after 120,000 pages have printed to let you know it is time to replace printer maintenance items. Order a maintenance kit when this message first appears. The maintenance kit contains all the items necessary to replace the fuser and transfer roller.

  • The maintenance kit may not be available in all geographies.
  • Using certain types of paper or specialty media may require more frequent replacement of the maintenance kit.

See the following table for the maintenance kit part number for your printer:

Part name Part number

Maintenance kit 40X5402 (100 V)*

40X5400 (115 V)

40X5401 (230 V)

* Designed for use only in Japan

Replacing supplies

Replacing the toner cartridge

When 88 Cartridge low appears, or when you experience faded print, remove the toner cartridge. Firmly shake it side-to-side and front-to-back several times to redistribute the toner, and then reinsert it and continue printing. When shaking the cartridge no longer improves the print quality, replace the toner cartridge.

Photoconductor kit E260X22G · Maintaining the printer

Page 114 of the Lexmark E460dw user manual — Ordering a photoconductor kit
Page 114 · click to enlarge
Page 114

To replace the toner cartridge:

1 Open the front door by pressing the button on the left side of the printer and lowering the door.

Lexmark E460dw — Ordering a photoconductor kit diagram (page 114)
Fig. 59 · Ordering a photoconductor kit

2 Press the button on the base of the photoconductor kit, and then pull the toner cartridge out using the handle.

Lexmark E460dw — Ordering a photoconductor kit diagram (page 114)
Fig. 60 · Ordering a photoconductor kit

3 Unpack the new toner cartridge.

4 Rotate the cartridge in all directions to distribute the toner.

Maintaining the printer

Page 115 of the Lexmark E460dw user manual — Replacing the photoconductor kit
Page 115 · click to enlarge
Page 115

5 Install the new toner cartridge by aligning the rollers on the toner cartridge with the arrows on the tracks of the photoconductor kit. Push the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.

Lexmark E460dw — Replacing the photoconductor kit diagram (page 115)
Fig. 61 · Replacing the photoconductor kit

6 Close the front door.

Replacing the photoconductor kit

The printer automatically notifies you before the photoconductor kit reaches a page maximum by showing 84 PC Kit life warning or 84 Replace PC Kit on the display. You can also see the status of the photoconductor kit by printing a menu settings page.

When 84 PC Kit life warning or 84 Replace PC Kit first appears, you should immediately order a new photoconductor kit. While the printer may continue to function properly after the photoconductor kit has reached its official end-of-life, print quality significantly decreases.

1 Turn the printer off.

2 Open the front door by pressing the button on the left side of the printer and lowering the front door.

3 Pull the photoconductor kit and toner cartridge out of the printer as a unit by pulling on the toner cartridge handle.

Maintaining the printer

Page 116 of the Lexmark E460dw user manual — Replacing the photoconductor kit
Page 116 · click to enlarge
Page 116
Lexmark E460dw — Replacing the photoconductor kit diagram (page 116)
Fig. 62 · Replacing the photoconductor kit

Place the unit on a flat, clean surface.

4 Press the button on the base of the photoconductor kit. Pull the toner cartridge up and out using the handle.

Lexmark E460dw — Replacing the photoconductor kit diagram (page 116)
Fig. 63 · Replacing the photoconductor kit

5 Unpack the new photoconductor kit.

Maintaining the printer

Page 117 of the Lexmark E460dw user manual — Replacing the photoconductor kit
Page 117 · click to enlarge
Page 117
Lexmark E460dw — Replacing the photoconductor kit diagram (page 117)
Fig. 64 · Replacing the photoconductor kit

6 Insert the toner cartridge into the photoconductor kit by aligning the rollers on the toner cartridge with the tracks. Push the toner cartridge until it clicks into place.

Lexmark E460dw — Replacing the photoconductor kit diagram (page 117)
Fig. 65 · Replacing the photoconductor kit

7 Install the unit into the printer by aligning the arrows on the guides of the unit with the arrows in the printer. Push the unit as far as it will go.

Lexmark E460dw — Replacing the photoconductor kit diagram (page 117)
Fig. 66 · Replacing the photoconductor kit

8 After you replace the photoconductor kit, reset the photoconductor counter.

To reset the photoconductor counter, open the front door, press and hold until Resetting PC Counter appears. The power light blinks, and the printer beeps.

9 Close the front door.

Maintaining the printer

Page 118 of the Lexmark E460dw user manual — Shipping the printer
Page 118 · click to enlarge
Page 118

Moving the printer

Moving the printer to another location

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time.

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Maintaining the printer

Page 119 of the Lexmark E460dw user manual — Checking the virtual display
Page 119 · click to enlarge
Page 119

Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions including:

  • Viewing a virtual display of the printer control panel
  • Checking the status of the printer supplies
  • Configuring printer settings
  • Configuring network settings
  • Viewing reports

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.

  • If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.
  • For more information, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> .

Checking the virtual display

When the Embedded Web Server is open, a virtual display appears in the top left corner of the screen. It works as an actual display would work on a printer control panel, showing printer messages.

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.

The virtual display appears in the top left corner of the screen.

Administrative support

Page 120 of the Lexmark E460dw user manual — Modifying confidential print settings
Page 120 · click to enlarge
Page 120

Checking the device status

Using the Embedded Web Server, you can view paper tray settings, the level of toner in the print cartridge, the percentage of life remaining in the maintenance kit, and capacity measurements of certain printer parts. To view the device status:

1 Type the printer IP address in the address field of your Web browser.

2 Click Device Status.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.

To view reports from a network printer:

1 Type the printer IP address into the address field of your Web browser.

2 Click Reports, and then click the type of report you want to view.

Configuring supply notifications

You can determine how you would like to be notified when supplies run low or reach their end-of-life.

To configure supply notifications using the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Print Settings.

4 Click Supply Notifications.

5 From the drop-down box for each supply, select among the options for notification. Explanations for each option are provided.

6 Click Submit to save your selections.

Modifying confidential print settings

You can modify confidential print settings using the Embedded Web Server. You can set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted.

Administrative support

Page 121 of the Lexmark E460dw user manual — Restoring the factory default settings
Page 121 · click to enlarge
Page 121

You can set an expiration time for confidential print jobs. When a user has not printed the jobs within the designated time period, all of the jobs for that user are deleted.

To modify the confidential print settings:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Under Other Settings, click Security.

4 Click Confidential Print Setup.

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.

To set up e-mail alerts:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Under Other Settings, click E-mail Alert Setup.

4 Select the items for notification, and type in the e-mail addresses.

5 Click Submit.

Restoring the factory default settings

If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings. For more information, see “Printing a menu settings page” on page 29.

1 From the printer control panel, press .

2 Press the up or down arrow button until Settings appears, and then press .

3 Press the up or down arrow button until General Settings appears, and then press .

Administrative support

Page 122 of the Lexmark E460dw user manual — Setting up e-mail alerts
Page 122 · click to enlarge
Page 122

4 Press the up or down arrow button until Factory Defaults appears, and then press .

5 Press the up or down arrow button until Restore Now appears, and then press .

Restoring Factory Defaults appears.

Administrative support

Page 123 of the Lexmark E460dw user manual — Avoiding jams
Page 123 · click to enlarge
Page 123

Clearing jams

By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. For more information, see “Avoiding jams” on page 123. If jams do occur, follow the steps outlined in this chapter.

To resolve jam messages, you must clear the entire paper path, and then press to clear the message and resume printing. The printer prints a new copy of the page that jammed if Jam Recovery is set to On or Auto; however, the Auto setting does not guarantee the page will print.

Avoiding jams

The following hints can help you avoid jams:

  • Use only recommended paper or specialty media. For more information, see “Supported paper sizes, types, weights, and capacities” on page 60.
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Do not feed envelopes that: – Have excessive curl or twist – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes – Are stuck together or damaged in any way
  • Store the paper in an appropriate environment.
  • Do not remove trays while the printer is printing.
  • Do not load the multipurpose feeder while the printer is printing. Load the multipurpose feeder prior to printing, or wait for a prompt to load it.
  • Push all trays in firmly after loading paper.
  • Make sure the guides in the trays are properly positioned and are not pressing too tightly against the paper.
  • Make sure all sizes and types are set correctly in the printer control panel menu.
  • Make sure all printer cables are attached correctly. For more information, see the setup documentation.

Clearing jams

Page 124 of the Lexmark E460dw user manual — Understanding jam messages and locations
Page 124 · click to enlarge
Page 124

Identifying jams in the paper path

The following illustration shows the path that paper travels through the printer. The path varies depending on the input source (tray or feeder) and depending on whether a duplex (two-sided) print job is being sent.

When a jam occurs, a jam message appears, indicating the region of the jam or the number of jammed sheets. The three-digit jam prefix numbers are given in the following illustration to show where each jam occurs.

Lexmark E460dw — Identifying jams in the paper path diagram (page 124)
Fig. 67 · Identifying jams in the paper path

Understanding jam messages and locations

Open doors and covers, and remove trays to access jam locations. The following illustration and table indicate these locations. See “Jam message numbers and how to access each jam” on page 125 for a list of jam numbers and instructions for how to access each jam.

Clearing jams

Page 125 of the Lexmark E460dw user manual — Jam message numbers and how to access each jam
Page 125 · click to enlarge
Page 125
Lexmark E460dw — Identifying jams in the paper path diagram (page 125)
Fig. 68 · Identifying jams in the paper path
Lexmark E460dw — Identifying jams in the paper path diagram (page 125)
Fig. 69 · Identifying jams in the paper path

Jam message numbers and how to access each jam

Lexmark E460dw — Jam message numbers and how to access each jam diagram (page 125)
Fig. 70 · Jam message numbers and how to access each jam
  • Remove Tray 1.
  • Open the front door, and then remove the photoconductor kit.

201 Open the front door, and then remove the photoconductor kit.

202 Open the front door, and then open the rear door.

231 Open the front door, and then open the rear door.

233 Remove Tray 1, and then depress the lever.

Clearing jams

Page 126 of the Lexmark E460dw user manual — 200 paper jam
Page 126 · click to enlarge
Page 126
Lexmark E460dw — 200 paper jam diagram (page 126)
Fig. 71 · 200 paper jam
  • Open the front door, and then open the rear door.
  • Remove Tray 1, and then depress the lever.

235 Remove the jam from the standard exit bin.

  • If the sheet is visible in the multipurpose feeder, gently pull it from the front of the multipurpose feeder.
  • If it is not visible, open the front door, and then remove the unit. Lift the flap at the front of the printer, and then remove any jammed sheets.

200 paper jam

1 Remove the tray from the printer.

Lexmark E460dw — 200 paper jam diagram (page 126)
Fig. 72 · 200 paper jam

2 Remove the jam if you see it here.

Lexmark E460dw — 200 paper jam diagram (page 126)
Fig. 73 · 200 paper jam

Clearing jams

Page 127 of the Lexmark E460dw user manual — 200 paper jam
Page 127 · click to enlarge
Page 127

3 If you do not see it, open the front door, and then remove the photoconductor kit and toner cartridge (unit).

Lexmark E460dw — 200 paper jam diagram (page 127)
Fig. 74 · 200 paper jam

4 Lift the flap in front of the printer, and remove any jammed sheets.

Lexmark E460dw — 200 paper jam diagram (page 127)
Fig. 75 · 200 paper jam
Lexmark E460dw — 200 paper jam diagram (page 127)
Fig. 76 · 200 paper jam

5 Align and insert the unit.

6 Close the front door.

7 Insert the tray.

8 Press .

Clearing jams

Page 128 of the Lexmark E460dw user manual — 201 paper jam
Page 128 · click to enlarge
Page 128

201 paper jam

1 Open the front door, and then remove the unit.

Lexmark E460dw — 201 paper jam diagram (page 128)
Fig. 77 · 201 paper jam

2 Lift the flap in front of the printer, and then remove any jammed sheets.

Lexmark E460dw — 201 paper jam diagram (page 128)
Fig. 78 · 201 paper jam
Lexmark E460dw — 201 paper jam diagram (page 128)
Fig. 79 · 201 paper jam

3 Align and insert the unit.

4 Close the front door.

5 Press .

Clearing jams

Page 129 of the Lexmark E460dw user manual — 202 paper jam
Page 129 · click to enlarge
Page 129

202 paper jam

1 Open the front door, and then remove the unit.

Lexmark E460dw — 202 paper jam diagram (page 129)
Fig. 80 · 202 paper jam

2 Lift the flap in front of the printer, and then remove any jammed sheets.

Lexmark E460dw — 202 paper jam diagram (page 129)
Fig. 81 · 202 paper jam
Lexmark E460dw — 202 paper jam diagram (page 129)
Fig. 82 · 202 paper jam

3 Open the rear door.

Lexmark E460dw — 202 paper jam diagram (page 129)
Fig. 83 · 202 paper jam

Clearing jams

Page 130 of the Lexmark E460dw user manual — 231 paper jam
Page 130 · click to enlarge
Page 130

4 Remove the jam.

Lexmark E460dw — 231 paper jam diagram (page 130)
Fig. 84 · 231 paper jam

5 Align and insert the unit.

6 Close the rear door.

7 Close the front door.

8 Press .

231 paper jam

1 Open the front door.

Lexmark E460dw — 231 paper jam diagram (page 130)
Fig. 85 · 231 paper jam

2 Open the rear door.

Clearing jams

Page 131 of the Lexmark E460dw user manual — 231 paper jam
Page 131 · click to enlarge
Page 131

3 Remove the jam.

Lexmark E460dw — 231 paper jam diagram (page 131)
Fig. 86 · 231 paper jam
Lexmark E460dw — 231 paper jam diagram (page 131)
Fig. 87 · 231 paper jam

4 Close the rear door.

5 Close the front door.

6 Press .

If this does not clear the jam, complete the steps in “233 paper jam” on page 132.

Clearing jams

Page 132 of the Lexmark E460dw user manual — 234 paper jam
Page 132 · click to enlarge
Page 132

233 paper jam

1 Remove the tray from the printer.

Lexmark E460dw — 233 paper jam diagram (page 132)
Fig. 88 · 233 paper jam

2 Locate the lever shown. Pull the lever down to release the jam.

3 Pull the jammed sheets from the duplex area.

Lexmark E460dw — 233 paper jam diagram (page 132)
Fig. 89 · 233 paper jam
Lexmark E460dw — 233 paper jam diagram (page 132)
Fig. 90 · 233 paper jam

4 Insert the tray.

5 Press .

If this does not clear the jam, complete the steps in “231 paper jam” on page 130.

234 paper jam

A single jam or multiple jams are in the duplex area of the printer when the printer is turned on. To locate and remove the jammed sheets, complete all the steps in:

  • “231 paper jam” on page 130
  • “233 paper jam” on page 132

Clearing jams

Page 133 of the Lexmark E460dw user manual — 24x paper jam
Page 133 · click to enlarge
Page 133

235 paper jam

A duplex print job was sent to the printer using a size of paper not supported for duplex printing. A sheet is jammed in the standard exit bin.

1 To remove the jam, gently pull the jammed sheet out of the standard exit bin.

Lexmark E460dw — 235 paper jam diagram (page 133)
Fig. 91 · 235 paper jam

2 Press .

24x paper jam

1 Remove the optional tray from the printer.

Lexmark E460dw — 24x paper jam diagram (page 133)
Fig. 92 · 24x paper jam

Clearing jams

Page 134 of the Lexmark E460dw user manual — 251 paper jam
Page 134 · click to enlarge
Page 134

2 Remove the jam.

Lexmark E460dw — 251 paper jam diagram (page 134)
Fig. 93 · 251 paper jam

3 Insert the optional tray.

4 Press .

251 paper jam

A sheet of paper or specialty media failed to feed completely from the multipurpose feeder. Part of it may still be visible. If it is visible, gently pull the jammed sheet from the front of the multipurpose feeder.

Lexmark E460dw — 251 paper jam diagram (page 134)
Fig. 94 · 251 paper jam

Clearing jams

Page 135 of the Lexmark E460dw user manual — 251 paper jam
Page 135 · click to enlarge
Page 135

If the sheet is not visible, complete the following steps:

1 Open the front door, and then remove the unit.

Lexmark E460dw — 251 paper jam diagram (page 135)
Fig. 95 · 251 paper jam

2 Lift the flap at the front of the printer, and then remove any jammed sheets of paper that are short lengths of paper.

Lexmark E460dw — 251 paper jam diagram (page 135)
Fig. 96 · 251 paper jam
Lexmark E460dw — 251 paper jam diagram (page 135)
Fig. 97 · 251 paper jam

3 Align and insert the unit.

4 Close the front door.

5 Press .

Clearing jams

Page 136 of the Lexmark E460dw user manual — Change <src> to <custom string>
Page 136 · click to enlarge
Page 136

Troubleshooting

Understanding printer messages

Calibrating

Wait for the message to clear.

Cartridge Life Exceeded

The toner cartridge is exhausted.

1 Remove the used toner cartridge, and then install a new one.

2 Press to clear the message.

Change <src> to <custom type name>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

  • To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Change <src> to <custom string>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

  • To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Troubleshooting

Page 137 of the Lexmark E460dw user manual — Load <src> with <custom type name>
Page 137 · click to enlarge
Page 137

Change <src> to <size>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

  • To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Change <src> to <type> <size>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

  • To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Close front door

Close the front door of the printer.

Load <src> with <custom type name>

Try one or more of the following:

  • Load the specified paper into the specified source to clear the message and continue printing.
  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Troubleshooting

Page 138 of the Lexmark E460dw user manual — Load Manual Feeder with <custom type name>
Page 138 · click to enlarge
Page 138

Load <src> with <custom string>

Try one or more of the following:

  • Load the specified paper into the specified source to clear the message and continue printing.
  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Load <src> with <type> <size>

Try one or more of the following:

  • Load the specified paper into the specified source to clear the message and continue printing.
  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Load <src> with <size>

Try one or more of the following:

  • Load the specified paper into the specified source to clear the message and continue printing.
  • To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper Changed, Continue appears, and then press .
  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Load Manual Feeder with <custom type name>

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper type and size.
  • Ignore the request and print on paper that is already being used in one of the trays. Press the up or down arrow

button until Automatically select paper appears, and then press .

If the printer finds a tray that has paper of the correct type, then it uses the paper from that tray. If the printer cannot find a tray with the correct paper type, then it prints on the paper that is installed in the default paper source.

  • Press the up or down arrow button until Cancel job appears, and then press to cancel the print job.
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Troubleshooting

Page 139 of the Lexmark E460dw user manual — Load Manual Feeder with <size>
Page 139 · click to enlarge
Page 139

Load Manual Feeder with <custom string>

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper type and size.
  • Ignore the request and print on paper that is already being used in one of the trays. Press the up or down arrow

button until Automatically select paper appears, and then press .

If the printer finds a tray that has paper of the correct type, then it uses the paper from that tray. If the printer cannot find a tray with the correct paper type, then it prints on the paper that is installed in the default paper source.

  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Load Manual Feeder with <type> <size>

Try one or more of the following:

  • Load the correct paper type and size in the multipurpose feeder.
  • Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down

arrow button until Automatically select paper appears, and then press . The current job may not print correctly.

If the printer finds a source that has paper of the correct type, then it uses the paper from that source. If the printer cannot find a source with the correct paper type, then it prints on the paper that is installed in the default paper source.

  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Load Manual Feeder with <size>

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper size.

If there is no paper in the multipurpose feeder, then feed a sheet of paper to clear the message. • Ignore the request and print on paper that is already being used in one of the input sources. Press the up or down

arrow button until Automatically select paper appears, and then press .

If the printer finds a source that has paper of the correct type, then it uses the paper from that source. If the printer cannot find a source with the correct paper type, then it prints on the paper that is installed in the default paper source.

  • Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
  • For more information, press the up or down arrow button until Show me or Tell me more appears, and then press .

Troubleshooting

Page 140 of the Lexmark E460dw user manual — Routine maintenance needed
Page 140 · click to enlarge
Page 140

Remove paper from standard bin

The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and continue printing.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Replace Cartridge

The toner cartridge is exhausted.

1 Remove the used toner cartridge, and then install a new one.

2 Press to clear the message.

Replace PC Kit

This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server).

If the setting is On, then the printer stops printing. Press to select Continue and continue printing.

When the PC Kit Life Warning appears, order a new photoconductor kit.

Resetting the printer

Wait for the message to clear.

Resetting without replacing may affect print quality.

You selected No from the “Verify PC unit replaced” screen. Wait for the message to clear.

Restoring Factory Defaults

Wait for the message to clear.

When factory default settings are restored:

  • All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
  • All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom settings in the Serial <x>, Network, Infrared, LocalTalk, and USB menus.

Routine maintenance needed

The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a transfer roller. Then contact Customer Support, and report the message.

Troubleshooting

Page 141 of the Lexmark E460dw user manual — 31.yy Replace defective or missing cartridge
Page 141 · click to enlarge
Page 141

Standard Bin Full

Remove the stack of paper from the standard exit bin to clear the message.

Stopping

Wait for the message to clear.

Submitting selection

Wait for the message to clear.

Too many failed panel logins

The printer is now in a lockout mode because:

  • You attempted to log in too many times with an incorrect PIN
  • You attempted to log in using an incorrect password number for access to a printer feature, setting, or menu that you do not have access to.

Note: There is a defined limit on the number of login attempts. Once the limit is reached, this message appears and the printer enters a lockout mode. The message remains on the printer control panel, and any further attempts to enter menus is denied until the defined time out expires. The time out duration is set by your system support person.

Wait for the message to clear once the time out expires, and then:

  • Enter the correct PIN to access any held jobs
  • See your system support person if you need a password number to enter a specific printer feature, setting, or menu that is blocked from your use without the number.

Tray <x> disabled

The specified tray is disabled from the Disable Hardware menu of the Config menu. To clear the message, enable the specified tray through the same menu. Consult your system support person for help.

Tray <x> Missing

Insert the specified tray into the printer.

30.yy Invalid refill, change cartridge

An unsupported, refilled toner cartridge is installed. Remove the toner cartridge, and then install a new one.

31.yy Replace defective or missing cartridge

The toner cartridge is either missing or not functioning properly.

Try one or more of the following:

  • Remove the toner cartridge, and then reinstall it.
  • Remove the toner cartridge, and then install a new one.

Troubleshooting

Page 142 of the Lexmark E460dw user manual — 37 Insufficient memory to collate job
Page 142 · click to enlarge
Page 142

32.yy Cartridge part number unsupported by device

Remove the toner cartridge, and then install a supported one.

32 Replace unsupported cartridge

Remove the toner cartridge, and then install a supported one.

34 Short paper

Try one or more of the following:

  • Load the appropriate paper in the tray.
  • Press the up or down arrow button until Continue appears, and then press to clear the message and print the job using a different paper tray.
  • Check tray length and width guides and make sure the paper is properly loaded in the tray.
  • For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper size and type.

For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper size and type. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.

  • Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press .

35 Insufficient memory to support Resource Save feature

The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save and continue printing.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:

  • Press the down arrow button until Continue appears, and then press to stop the defragment operation and continue printing.
  • Delete fonts, macros, and other data in printer memory.
  • Install additional printer memory.

37 Insufficient memory to collate job

Try one or more of the following:

  • Press the down arrow button until Continue appears, and then press to print the portion of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

Troubleshooting

Page 143 of the Lexmark E460dw user manual — 51 Defective flash detected
Page 143 · click to enlarge
Page 143

37 Insufficient memory, some Held Jobs were deleted

The printer deleted some held jobs in order to process current jobs. Press the down arrow button

until Continue appears, and then press to clear the message.

38 Memory full

Try one or more of the following:

  • Press the up or down arrow button until Continue appears, and then press to clear the message.
  • Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press .
  • Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:

  • Press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.
  • Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press .
  • Install additional printer memory.

42.xy Cartridge region mismatch

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

1 US and Canada

2 EMEA (Europe, Middle East, Africa)

3 Asia Pacific Region

51 Defective flash detected

  • Press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.
  • Cancel the current print job.

4 Latin America · 9 Undefined region · Troubleshooting

Page 144 of the Lexmark E460dw user manual — 58 Too many flash options installed
Page 144 · click to enlarge
Page 144

52 Not enough free space in flash memory for resources

Try one or more of the following:

  • Press the up or down arrow button until Continue appears, and then press to stop the defragment operation and continue printing.
  • Downloaded fonts and macros not previously stored in flash memory are deleted.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:

  • Press the up or down arrow button until Continue appears, and then press to stop the defragment operation and continue printing.
  • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Standard network software error

Try one or more of the following:

  • Press the up or down arrow button until Continue appears, and then press to clear the message
  • Turn the printer off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

56 Standard parallel port disabled

Try one or more of the following:

  • The printer discards any data received through the parallel port. Press to clear the message and continue printing.
  • Make sure the Parallel Buffer menu item is not set to Disabled.

56 Standard USB port disabled

Try one or more of the following:

  • The printer discards any data received through the USB port. Press to clear the message and continue printing.
  • Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Try one or more of the following:

  • Turn the printer off, and then remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory.

Troubleshooting

Page 145 of the Lexmark E460dw user manual — 1565 Emulation error, load emulation option
Page 145 · click to enlarge
Page 145

4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. • Press to clear the message and continue printing.

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

80 Routine Maintenance

The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a transfer roller. Contact Customer Support, and report the message.

84 PC Kit life warning

The photoconductor kit is near exhaustion.

Try one or more of the following:

  • Replace the photoconductor kit.
  • Press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.

84 Replace PC Kit

The photoconductor kit is exhausted. Install a new photoconductor kit.

88 Cartridge low

The toner is low. Replace the toner cartridge, and then press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.

1565 Emulation error, load emulation option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.

To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.

Troubleshooting

Page 146 of the Lexmark E460dw user manual — M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED
Page 146 · click to enlarge
Page 146

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electronic equipment plugged into the outlet is working.
  • The printer is turned on. Check the printer power switch.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.
  • All options are properly installed.
  • The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Solving printing problems

Jobs do not print

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready or Power Saver appears on the display before sending a job to print.

C HECK TO SEE IF THE STANDARD EXIT BIN IS FULL

Remove the stack of paper from the standard exit bin.

C HECK TO SEE IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED

  • Verify that you are using the correct printer software.
  • If you are using a USB port, make sure you are running a supported operating system and using compatible printer software.

Troubleshooting

Page 147 of the Lexmark E460dw user manual — Multiple-language PDFs do not print
Page 147 · click to enlarge
Page 147

M AKE SURE THE INTERNAL PRINT SERVER IS INSTALLED PROPERLY AND WORKING

  • Make sure the internal print server is properly installed and that the printer is connected to the network. For more information about installing a network printer, click View User's Guide and Documentation on the Software and Documentation CD.
  • Print a network setup page and check that the status shows Connected . If the status is Not Connected , check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.

M AKE SURE YOU ARE USING A RECOMMENDED PRINTER CABLE

For more information, visit the Lexmark Web site at www.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:

P ARTIAL JOB , NO JOB , OR BLANK PAGES PRINT

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then print it again.
  • For PDF documents, recreate the PDF and then print it again.

M AKE SURE THE PRINTER HAS SUFFICIENT MEMORY

Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Multiple-language PDFs do not print

The documents contain unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.

2 Click the printer icon.

The Print dialog appears.

3 Select Print as image.

4 Click OK.

Troubleshooting

Page 148 of the Lexmark E460dw user manual — Tray linking does not work
Page 148 · click to enlarge
Page 148

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.

C HANGE THE P AGE P ROTECT SETTING TO O FF

1 From the printer control panel, press .

2 Press the up or down arrow button until Settings appears, and then press .

3 Press the up or down arrow button until General Settings appears, and then press .

4 Press the up or down arrow button until Print Recovery appears, and then press .

5 Press the up or down arrow button until Page Protect appears, and then press .

6 Press the up or down arrow button until Off appears, and then press .

Job prints from the wrong tray or on the wrong paper

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

Incorrect characters print

Make sure the printer is not in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.

Tray linking does not work

L OAD THE SAME SIZE AND TYPE OF PAPER IN EACH TRAY

1 Load the same size and type of paper in each tray.

2 Move the paper guides to the correct positions for the paper size loaded in each tray.

MAKE SURE THE PAPER SIZE AND PAPER TYPE SETTINGS ARE THE SAME FOR EACH TRAY

1 Print a menu settings page and compare the settings for each tray.

2 If necessary, adjust the settings from the Paper Size/Type menu.

Troubleshooting

Page 149 of the Lexmark E460dw user manual — R ESET THE PRINTER
Page 149 · click to enlarge
Page 149

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From Print Properties or the printer control panel Finishing menu, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by reducing the number and size of fonts, the number and complexity of images, and the number of pages in the job.

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory.

Unexpected page breaks occur

Increase the Print Timeout value:

1 From the printer control panel, press .

2 Press the up or down arrow button until Settings appears, and then press .

3 Press the up or down arrow button until General Settings appears, and then press .

4 Press the up or down arrow button until Timeouts appears, and then press .

5 Press the up or down arrow button until Print Timeout appears, and then press .

6 Press the up or down arrow button until the value you want appears, and then press .

Envelope seals when printing

Due to humidity and heat, some envelopes become sealed during the printing process. If this happens, open the rear door of the printer to allow envelopes to exit there.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait for about 10 seconds, and then turn the printer on.

Troubleshooting

Page 150 of the Lexmark E460dw user manual — Memory card
Page 150 · click to enlarge
Page 150

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer from the wall outlet.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, reinstall it.

M AKE SURE THE OPTION IS SELECTED

From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser.

Drawers

These are possible solutions. Try one or more of the following:

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Pull the tray completely out.

2 Check for paper jams or misfeeds.

3 Make sure the guides are aligned against the edges of the paper.

4 Insert the tray.

R ESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Memory card

Make sure the memory card is securely connected to the printer system board.

Troubleshooting

Page 151 of the Lexmark E460dw user manual — Page that jammed does not reprint after you clear the jam
Page 151 · click to enlarge
Page 151

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

FAN, FLEX, AND STRAIGHTEN THE PAPER IN THE TRAY OR FEEDER

Lexmark E460dw — Paper frequently jams diagram (page 151)
Fig. 98 · Paper frequently jams

Turn the stack of paper over, if possible, when you reload it into the tray or feeder.

C HECK THE PAPER

Use recommended paper and other specialty media. For more information, see “Paper and specialty media guidelines” on page 57.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE TRAY OR FEEDER

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

C HECK THE GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture due to high humidity. Store the paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

The paper path is not clear. Clear jammed paper from the entire paper path, and then press .

Page that jammed does not reprint after you clear the jam

Jam Recovery is set to Off. Set Jam Recovery to Auto or On:

1 Press .

2 Press the up or down arrow button until Settings appears, and then press .

3 Press the up or down arrow button until General Settings appears, and then press .

Troubleshooting

Page 152 of the Lexmark E460dw user manual — Isolating print quality problems
Page 152 · click to enlarge
Page 152

4 Press the up or down arrow button until Print Recovery appears, and then press .

5 Press the up or down arrow button until Jam Recovery appears, and then press .

6 Press the up or down arrow button until On or Auto appears, and then press .

Solving print quality problems

The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, then contact Customer Support. You may have a printer part that requires adjustment or replacement.

Isolating print quality problems

To help isolate print quality problems, print the print quality test pages, but first make sure the standard tray is loaded:

1 Turn the printer off.

2 Load letter- or A4-size paper in the standard tray. Load the paper stack toward the back of the tray as shown with the recommended print side facedown. Notice the maximum fill line on the side of the tray to guide you. Do not overfill the tray.

Lexmark E460dw — Isolating print quality problems diagram (page 152)
Fig. 99 · Isolating print quality problems

Print the print quality test pages:

1 Turn the printer off.

2 From the printer control panel, hold down and the right arrow button while turning the printer on.

3 Release the buttons when CONFIG MENU appears.

4 Press the arrow buttons until Prt Quality Pgs appears, and then press .

The print quality test pages print.

5 Press the arrow buttons until Exit Config Menu appears, and then press .

Resetting the Printer appears briefly, and then Ready appears.

Troubleshooting

Page 153 of the Lexmark E460dw user manual — C HECK THE P APER S IZE SETTING
Page 153 · click to enlarge
Page 153

Blank pages

Try one or more of the following:

  • Remove and reinstall the toner cartridge.
  • Remove and reinstall the photoconductor kit.

If the printer still prints blank pages, it may need to be serviced. For more information, contact Customer Support.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.

Clipped images

These are possible solutions. Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE P APER S IZE SETTING

Make sure the Paper Size setting matches the paper loaded in the tray.

Troubleshooting

Page 154 of the Lexmark E460dw user manual — C HECK THE P APER T YPE SETTING
Page 154 · click to enlarge
Page 154

Gray background

  • For Windows users: From Print Properties, select a different Toner Darkness setting before sending the job to print.
  • For Macintosh users: From the print options, Copies & Pages, or General pop-up menu, choose Printer Features, and then choose the setting needed from the Toner Darkness pop-up menu.
  • From the printer control panel Quality menu, select a different Toner Darkness setting before sending the job to print.

Ghost images

These are possible solutions. Try one or more of the following:

T HE PHOTOCONDUCTOR KIT IS DEFECTIVE

Replace the photoconductor kit.

C HECK THE P APER T YPE SETTING

  • For Windows users: From Print Properties, make sure the Paper Type setting matches the paper loaded in the tray.
  • For Macintosh users: From the Print dialog, make sure the Paper Type setting matches the paper loaded in the tray.
  • From the printer control panel Paper menu, make sure the Paper Type setting matches the paper loaded in the tray.

Troubleshooting

Page 155 of the Lexmark E460dw user manual — T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY
Page 155 · click to enlarge
Page 155

Incorrect margins

These are possible solutions. Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE P APER S IZE SETTING

Make sure the Paper Size setting matches the paper loaded in the tray.

C HECK THE P AGE SIZE SETTING

Before sending the job to print, specify the correct page size in Print Properties, the Print dialog, or the software program.

Paper curl

These are possible solutions. Try one or more of the following:

C HECK THE P APER T YPE SETTING

  • For Windows users: From Print Properties, make sure the Paper Type setting matches the paper loaded in the tray.
  • For Macintosh users: From the Print dialog, make sure the Paper Type setting matches the paper loaded in the tray.
  • From the printer control panel Paper menu, make sure the Paper Type setting matches the paper loaded in the tray.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Troubleshooting

Page 156 of the Lexmark E460dw user manual — T HE TONER CARTRIDGE MAY BE DEFECTIVE
Page 156 · click to enlarge
Page 156

Print is too dark

These are possible solutions. Try one or more of the following:

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.

  • For Windows users: From Print Properties, change these settings.
  • For Macintosh users: 1 Choose File > Print . 2 Locate the drop-down box under the Orientation pictures, and then click the down button. 3 Click Printer Features . 4 Change the settings for Toner Darkness, Brightness, and Contrast.
  • From the printer control panel Quality menu, change these settings.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER

Avoid textured paper with rough finishes.

C HECK THE P APER T YPE SETTING

  • For Windows users: From Print Properties, make sure the Media Type setting matches the paper loaded in the tray.
  • For Macintosh users: From the Print dialog, make sure the Paper Type setting matches the paper loaded in the tray.
  • From the printer control panel Paper menu, make sure the Paper Type setting matches the paper loaded in the tray.

T HE TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

Troubleshooting

Page 157 of the Lexmark E460dw user manual — T HE PRINT CARTRIDGE MAY BE DEFECTIVE
Page 157 · click to enlarge
Page 157

Print is too light

These are possible solutions. Try one or more of the following:

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.

  • From the printer control panel, change these settings from the Quality menu.
  • For Windows users, change these settings from Print Properties.
  • For Macintosh users, change these settings from the Print dialog and pop-up menus.

T HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER

Avoid textured paper with rough finishes.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

T HE TONER IS LOW

When 88 Cartridge Low appears, order a new print cartridge.

T HE PRINT CARTRIDGE MAY BE DEFECTIVE

Replace the print cartridge.

Troubleshooting

Page 158 of the Lexmark E460dw user manual — C HECK THE P APER T EXTURE SETTING
Page 158 · click to enlarge
Page 158

Skewed print

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Toner fog or background shading appears on the page

These are possible solutions. Try one or more of the following:

T HE TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

T HERE IS TONER IN THE PAPER PATH

Contact Customer Support.

Toner rubs off

These are possible solutions. Try one or more of the following:

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

C HECK THE P APER T EXTURE SETTING

Make sure the Paper Texture setting matches the paper loaded in the tray.

Troubleshooting

Page 159 of the Lexmark E460dw user manual — Streaked horizontal lines
Page 159 · click to enlarge
Page 159

Toner specks

These are possible solutions. Try one or more of the following:

T HE TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

T HERE IS TONER IN THE PAPER PATH

Contact Customer Support.

Transparency print quality is poor

C HECK THE TRANSPARENCIES

Use only transparencies recommended by the printer manufacturer.

C HECK THE P APER T YPE SETTING

Load transparencies, and make sure the Paper Type setting is set to Transparency.

Streaked horizontal lines

These are possible solutions. Try one or more of the following:

THE TONER MAY SMEAR WHEN PAPER IS FED FROM A SPECIFIC SOURCE

From Print Properties, the Print dialog, or the printer control panel, select another tray or feeder to feed the paper for the job.

Troubleshooting

Page 160 of the Lexmark E460dw user manual — T HERE MAY BE EXCESS TONER IN THE PAPER PATH
Page 160 · click to enlarge
Page 160

T HE TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

M AKE SURE THE PAPER PATH IS CLEAR

Paper could be caught between the photoconductor kit and the fuser. Check the paper path around the fuser area.

Clear any paper you see.

T HERE MAY BE EXCESS TONER IN THE PAPER PATH

Contact Customer Support.

Streaked vertical lines

These are possible solutions. Try one or more of the following:

THE TONER MAY SMEAR WHEN PAPER IS FED FROM A SPECIFIC SOURCE

From Print Properties, the Print dialog, or the printer control panel, select another tray or feeder to feed paper for the job.

T HE TONER CARTRIDGE IS DEFECTIVE

Replace the toner cartridge.

M AKE SURE THE PAPER PATH IS CLEAR

Paper could be caught between the photoconductor kit and the fuser. Check the paper path around the fuser area.

Clear any paper you see.

T HERE MAY BE EXCESS TONER IN THE PAPER PATH

Contact Customer Support.

Troubleshooting

Page 161 of the Lexmark E460dw user manual — C HECK THE NETWORK SETTINGS
Page 161 · click to enlarge
Page 161

Solid black or white streaks appear on transparencies or paper

These are possible solutions. Try one or more of the following:

M AKE SURE THE FILL PATTERN IS CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

C HECK THE PAPER TYPE

  • Try a different type of paper.
  • For transparencies, use only ones recommended by the printer manufacturer.
  • Make sure the Paper Type setting matches what is loaded in the tray or feeder.
  • Make sure the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or feeder.

M AKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE TONER CARTRIDGE

Remove the toner cartridge and shake it from side to side to redistribute the toner to extend the life of the cartridge, and then reinstall it.

T HE TONER CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER

Replace the used toner cartridge with a new one.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:

C HECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and connected to the same network.

C HECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.

Troubleshooting

Page 162 of the Lexmark E460dw user manual — Contacting Customer Support
Page 162 · click to enlarge
Page 162

Contacting Customer Support

When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Troubleshooting

Page 163 of the Lexmark E460dw user manual — 630, 63W, 6EW
Page 163 · click to enlarge
Page 163

Notices

Product information

Product name:

Lexmark E460dn, Lexmark E460dw, Lexmark E462dtn

Machine type:

Model(s):

630, 63W, 6EW

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

If you don't have access to the Internet, you can contact Lexmark by mail:

Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA

© 2010 Lexmark International, Inc.

All rights reserved.

January 2010

Page 164 of the Lexmark E460dw user manual — Federal Communications Commission (FCC) compliance
Page 164 · click to enlarge
Page 164

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PrintCryption is a trademark of Lexmark International, Inc.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance

information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Page 165 of the Lexmark E460dw user manual — Static sensitivity notice
Page 165 · click to enlarge
Page 165

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Modular component notice

Wireless-equipped models contain the following modular component(s):

Lexmark regulatory type/model LEX-M04-001; FCC ID:IYLLEXM04001; IC:2376A-M04001

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Static sensitivity notice

Printing 53 dBA · Ready N/A

Page 166 of the Lexmark E460dw user manual — Laser advisory label
Page 166 · click to enlarge
Page 166

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature 16C° – 32C° (60 F° – 90F°)

Shipping and storage temperature -20.0C° – 40.0C° (-4 F° – 104F°)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Lexmark E460dw — Laser advisory label diagram (page 166)
Fig. 100 · Laser advisory label
Page 167 of the Lexmark E460dw user manual — Total energy usage
Page 167 · click to enlarge
Page 167

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard-copy output from electronic inputs. 500

Copying The product is generating hard-copy output from hard-copy original documents.

N/A

Scanning The product is scanning hard-copy documents. N/A

Ready The product is waiting for a print job. 12-14

Power Saver The product is in energy-saving mode. 11-13

Off The product is plugged into a wall outlet, but the power switch is turned off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Factory default Power Saver Timeout for this product (in minutes): 30

By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Page 168 of the Lexmark E460dw user manual — Industry Canada (Canada)
Page 168 · click to enlarge
Page 168

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Page 169 of the Lexmark E460dw user manual — Notice to users in the European Union
Page 169 · click to enlarge
Page 169

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the

Page 170 of the Lexmark E460dw user manual — Notice to users in the European Union
Page 170 · click to enlarge
Page 170

Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Page 171 of the Lexmark E460dw user manual — Limited warranty service
Page 171 · click to enlarge
Page 171

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de

essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Statement of Limited Warranty

Lexmark E460dn, Lexmark E460dw, Lexmark E462dtn

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

Page 172 of the Lexmark E460dw user manual — Limitation of liability
Page 172 · click to enlarge
Page 172

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Page 173 of the Lexmark E460dw user manual — LEXMARK SOFTWARE LICENSE AGREEMENT
Page 173 · click to enlarge
Page 173

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.

LEXMARK SOFTWARE LICENSE AGREEMENT

This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.

Page 174 of the Lexmark E460dw user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 174 · click to enlarge
Page 174

This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.

The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.

IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this License Agreement:

a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,

executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or

installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License Agreement. d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the

Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such

Page 175 of the Lexmark E460dw user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 175 · click to enlarge
Page 175

Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so shall be void. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program. 9 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you

Page 176 of the Lexmark E460dw user manual — ADOBE SYSTEMS INCORPORATED NOTICE
Page 176 · click to enlarge
Page 176

acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this License Agreement (except to the extent such extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.

MICROSOFT CORPORATION NOTICES

1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.com/fwlink/?LinkId=52369 2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fwlink/?LinkId=83288.

ADOBE SYSTEMS INCORPORATED NOTICE

Contains Flash®, Flash® Lite™ and/or Reader® technology by Adobe Systems Incorporated

This Product contains Adobe® Flash® player software under license from Adobe Systems Incorporated, Copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe, Reader and Flash are trademarks of Adobe Systems Incorporated.

Page 178 of the Lexmark E460dw user manual — Table of contents
Page 178 · click to enlarge
Page 178

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 179 of the Lexmark E460dw user manual — Table of contents
Page 179 · click to enlarge
Page 179

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 180 of the Lexmark E460dw user manual — Table of contents
Page 180 · click to enlarge
Page 180

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 181 of the Lexmark E460dw user manual — Table of contents
Page 181 · click to enlarge
Page 181

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.10Thank you for choosing this printer!p.10Finding information about the printerp.10Selecting a location for the printerp.11Printer configurationsp.12Understanding the printer control panelp.15Using the standard exit bin and paper stopp.18Additional printer setupp.20Installing internal optionsp.20Available internal optionsp.20Accessing the system board to install internal optionsp.20Installing a memory cardp.21Installing a flash memory or firmware cardp.24Installing hardware optionsp.25Installing a 250or 550-sheet drawerp.25Attaching cablesp.28Verifying printer setupp.29Printing a menu settings pagep.29Printing a network setup pagep.29Setting up the printer softwarep.30Installing printer softwarep.30Updating available options in the printer driverp.30Setting up wireless printingp.31Information you will need to set up the printer on a wireless networkp.31Installing the printer on a wireless network (Windows)p.32Installing the printer on a wireless network (Macintosh)p.34Installing the printer on a wired networkp.36Minimizing your printer's environmental impactp.39Saving paper and tonerp.39Using recycled paperp.39Conserving suppliesp.39Saving energyp.40Using Eco-Modep.40Reducing printer noisep.40Adjusting Power Saverp.41Recyclingp.42Recycling Lexmark productsp.42Recycling Lexmark packagingp.42Returning Lexmark cartridges for reuse or recyclingp.43Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading traysp.45Using the multipurpose feederp.49Linking and unlinking traysp.54Linking traysp.54Unlinking traysp.54Creating a custom name for a paper typep.55Assigning a customer paper type name to a trayp.55Paper and specialty media guidelinesp.57Paper guidelinesp.57Paper characteristicsp.57Unacceptable paperp.58Selecting paperp.58Selecting preprinted forms and letterheadp.59Using recycled paper and other office papersp.59Storing paperp.59Supported paper sizes, types, weights, and capacitiesp.60Paper types and weights supported by the printerp.60Paper sizes supported by the printerp.61Paper tray capacitiesp.62Printingp.63Printing a documentp.63Printing a documentp.63Printing on specialty mediap.64Tips on using letterheadp.64Tips on using transparenciesp.65Tips on using envelopesp.65Tips on using labelsp.66Tips on using card stockp.66Printing confidential and other held jobsp.67Holding jobs in the printerp.67Printing confidential and other held jobsp.67Printing information pagesp.69Printing a font sample listp.69Printing a directory listp.69Printing the print quality test pagesp.69Canceling a print jobp.70Canceling a print job from the printer control panelp.70Canceling a print job from the computerp.70Understanding printer menusp.72Menus listp.72Paper menup.73Default Source menup.73Paper Size/Type menup.73Configure MP menup.76Substitute Size menup.76Paper Texture menup.76Paper Weight menup.78Paper Loading menup.79Custom Types menup.80Universal Setup menup.81Reports menup.82Reports menup.82Network/Ports menup.83Active NIC menup.83Standard Network or Network <x> menusp.83Reports menu (under the Network/Ports menu)p.85Network Card menup.85TCP/IP menup.86IPv6 menup.87Wireless menup.87AppleTalk menup.88NetWare menup.88LexLink menup.89USB menup.89Parallel menup.91SMTP Setup menup.93Security menup.94Miscellaneous menup.94Confidential Print menup.94Security Audit Log menup.95Set Date/Time menup.96Settings menup.97General Settings menup.97Setup menup.100Finishing menup.101Quality menup.103Utilities menup.104XPS menup.105PDF menup.105PostScript menup.106PCL Emul menup.106HTML menup.109Image menup.110Maintaining the printerp.111Cleaning the exterior of the printerp.111Storing suppliesp.111Checking the status of supplies from a network computerp.111Ordering suppliesp.112Ordering toner cartridgesp.112Ordering a photoconductor kitp.113Ordering a maintenance kitp.113Replacing suppliesp.113Replacing the toner cartridgep.113Replacing the photoconductor kitp.115Moving the printerp.118Moving the printer to another locationp.118Shipping the printerp.118Administrative supportp.119Finding advanced networking and administrator informationp.119Using the Embedded Web Serverp.119Checking the virtual displayp.119Checking the device statusp.120Viewing reportsp.120Configuring supply notificationsp.120Modifying confidential print settingsp.120Setting up e-mail alertsp.121Restoring the factory default settingsp.121Clearing jamsp.123Avoiding jamsp.123Identifying jams in the paper pathp.124Understanding jam messages and locationsp.124200 paper jamp.126201 paper jamp.128202 paper jamp.129231 paper jamp.130233 paper jamp.132234 paper jamp.132235 paper jamp.13324x paper jamp.133251 paper jamp.134Troubleshootingp.136Understanding printer messagesp.136Calibratingp.136Cartridge Life Exceededp.136Change <src> to <custom type name>p.136Change <src> to <custom string>p.136Change <src> to <size>p.137Change <src> to <type> <size>p.137Close front doorp.137Load <src> with <custom type name>p.137Load <src> with <custom string>p.138Load <src> with <type> <size>p.138Load <src> with <size>p.138Load Manual Feeder with <custom type name>p.138Load Manual Feeder with <custom string>p.139Load Manual Feeder with <type> <size>p.139Load Manual Feeder with <size>p.139Remove paper from standard binp.140Remove paper from standard output binp.140Replace Cartridgep.140Replace PC Kitp.140Resetting the printerp.140Resetting without replacing may affect print quality.p.140Restoring Factory Defaultsp.140Routine maintenance neededp.140Standard Bin Fullp.141Stoppingp.141Submitting selectionp.141Too many failed panel loginsp.141Tray <x> disabledp.141Tray <x> Missingp.14130.yy Invalid refill, change cartridgep.14131.yy Replace defective or missing cartridgep.14132.yy Cartridge part number unsupported by devicep.14232 Replace unsupported cartridgep.14234 Short paperp.14235 Insufficient memory to support Resource Save featurep.14237 Insufficient memory for Flash Memory Defragment operationp.14237 Insufficient memory to collate jobp.14237 Insufficient memory, some Held Jobs were deletedp.14338 Memory fullp.14339 Complex page, some data may not have printedp.14342.xy Cartridge region mismatchp.14351 Defective flash detectedp.14352 Not enough free space in flash memory for resourcesp.14453 Unformatted flash detectedp.14454 Standard network software errorp.14456 Standard parallel port disabledp.14456 Standard USB port disabledp.14458 Too many flash options installedp.14458 Too many trays attachedp.14580 Routine Maintenancep.14584 PC Kit life warningp.14584 Replace PC Kitp.14588 Cartridge lowp.1451565 Emulation error, load emulation optionp.145Solving basic printer problemsp.146Printer control panel display is blank or displays only diamondsp.146Solving printing problemsp.146Jobs do not printp.146Confidential and other held jobs do not printp.147Multiple-language PDFs do not printp.147Job takes longer than expected to printp.148Job prints from the wrong tray or on the wrong paperp.148Incorrect characters printp.148Tray linking does not workp.148Large jobs do not collatep.149Unexpected page breaks occurp.149Envelope seals when printingp.149Solving option problemsp.149Option does not operate correctly or quits after it is installedp.149Drawersp.150Flash memory cardp.150Memory cardp.150Solving paper feed problemsp.151Paper frequently jamsp.151Paper jam message remains after jam is clearedp.151Page that jammed does not reprint after you clear the jamp.151Solving print quality problemsp.152Isolating print quality problemsp.152Blank pagesp.153Characters have jagged or uneven edgesp.153Clipped imagesp.153Gray backgroundp.154Ghost imagesp.154Incorrect marginsp.155Paper curlp.155Print is too darkp.156Print is too lightp.157Skewed printp.158Toner fog or background shading appears on the pagep.158Toner rubs offp.158Toner specksp.159Transparency print quality is poorp.159Streaked horizontal linesp.159Streaked vertical linesp.160Solid black or white streaks appear on transparencies or paperp.161Embedded Web Server does not openp.161Check the network connectionsp.161Check the network settingsp.161Contacting Customer Supportp.162Noticesp.163Product informationp.163Edition noticep.163UNITED STATES GOVERNMENT RIGHTSp.164Trademarksp.164Federal Communications Commission (FCC) compliance information statementp.164Modular component noticep.165Noise emission levelsp.165Waste from Electrical and Electronic Equipment (WEEE) directivep.165Static sensitivity noticep.165ENERGY STARp.166Temperature informationp.166Laser noticep.166Laser advisory labelp.166Power consumptionp.167Product power consumptionp.167Power Saverp.167Off modep.167Total energy usagep.167European Community (EC) directives conformityp.168Regulatory notices for wireless productsp.168Exposure to radio frequency radiationp.168Industry Canada (Canada)p.168Notice to users in the European Unionp.169Statement of Limited Warrantyp.171LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.173ADOBE SYSTEMS INCORPORATED NOTICEp.176Indexp.177
Page 182 of the Lexmark E460dw user manual — X XPS menu 105
Page 182 · click to enlarge
Page 182

using Macintosh 36 Wireless menu 87 wireless network

configuration information 31 installation, using Macintosh 34 installation, using Windows 32

X XPS menu 105

wired networking · Index

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark E460dw

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark E460dw

Be the first to ask — other owners or our team will answer.

Original document

Lexmark E460dw manual PDF

182 pages·3.7 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…