EN
Lexmark logo
Official user manual

Lexmark 91E

200 pages·7 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 91E
Table of Contents 438 sections Contents · Safety information · About your printer · Thank you for choosing this printer! · … ShowHide
Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 1 of the Lexmark 91E user manual — 901, 90E, 91E
Page 1 · click to enlarge
Page 1

Pro910 Series User's Guide

December 2011 www.lexmark.com

Machine type(s):

Model(s):

901, 90E, 91E

Page 2 of the Lexmark 91E user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 6 of the Lexmark 91E user manual — Safety information
Page 6 · click to enlarge
Page 6

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

SAVE THESE INSTRUCTIONS.

Safety information 6

Page 7 of the Lexmark 91E user manual — Conserving paper
Page 7 · click to enlarge
Page 7

About your printer 7

About your printer

Thank you for choosing this printer!

We've worked hard to make sure it will meet your needs.

To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.

We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.

Minimizing your printer's environmental impact

We are committed to protecting the environment and are continually improving our printers to reduce their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's environmental impact even further.

Conserving energy

  • Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to Sleep mode after the printer is left idle for 10 minutes.
  • Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum ‑ power standby mode after the printer has been idle for a set amount of time (the Sleep timeout).
  • Share your printer. Wireless/network printers allow you to share a single printer among multiple computers, thus conserving energy and other resources.

Conserving paper

  • Print more than one page image on one side of the paper. The Pages per Sheet feature allows you to print multiple pages on one sheet. You can print up to 16 page images on one side of a sheet of paper.
  • Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or automatically (depending on your printer model).
  • Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print Preview dialog, or the printer display (depending on your printer model).
  • Use recycled paper.
  • Reduce the margins of documents to be printed.
  • Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save them to a computer program, application, or flash drive for presentation.
Page 8 of the Lexmark 91E user manual — Publications
Page 8 · click to enlarge
Page 8

About your printer 8

Conserving ink

  • Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than normal and are ideal for printing documents that are mostly text.
  • Use font types and font settings that require less ink. Most programs or applications let you adjust the darkness of the colors.
  • Use high ‑ yield cartridges. These cartridges let you print more pages.

Recycling

  • Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To return an ink cartridge, go to <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a> , and then follow the instructions to request a postage ‑ paid bag.
  • Recycle the product packaging.
  • Recycle your old printer instead of throwing it away.
  • Recycle paper from discarded print jobs.
  • Use recycled paper.

To read the Lexmark Environmental Sustainability Report, visit www.lexmark.com/environment.

Finding information about the printer

Publications

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com.
Page 9 of the Lexmark 91E user manual — Finding information about the printer
Page 9 · click to enlarge
Page 9

About your printer 9

What are you looking for?Find it here Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Performing printing, copying, scanning, and faxing tasks, depending on your printer model • Configuring printer settings • Viewing and printing documents and photos • Setting up and using printer software • Setting up and configuring the printer on a network, depending on your printer model • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide The User's Guide is available on the installation software CD. For updates, check our Web site at http://support.lexmark.com. Creating and customizing printer solutions, depending on your printer modelSmartSolutions User's Guide and Help Go to http://smartsolutions.lexmark.com. Click HELP to view basic SmartSolutions information. Help using the printer softwareWindows or Mac Help Open a printer software program or application, and then click Help. Click to view context‑sensitive information. Notes: • The Help installs automatically with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system. The latest supplemental information, updates, and online technical support: • Troubleshooting hints and tips • Frequently asked questions • Documentation • Driver downloads • Live chat support • E‑mail supportLexmark Support Web site— http://support.lexmark.com Note: Select your region, and then select your product to view the appropriate support site. Record the following information (located on the store receipt and the back of the printer), and have it ready when you contact support so that they may serve you faster: • MAC address number • Serial number • Date purchased • Store where purchased Note: Lift the scanner unit to see the customer support label.
Lexmark 91E — Finding information about the printer diagram (page 9)
Fig. 1 · Finding information about the printer
Page 10 of the Lexmark 91E user manual — Understanding the parts of the printer
Page 10 · click to enlarge
Page 10

About your printer 10

What are you looking for?Find it here Telephone supportIn the US, call us at: 1‑800‑395‑4039 Monday–Friday (8:00 AM–11:00 PM ET), Saturday and Sunday (11:00 AM–8:00 PM ET) Support telephone numbers and hours of operation for your region or country can be found on the Support Web site (http://support.lexmark.com) or on the printed warranty that came with your printer.
  • Warranty information
  • In the US —See the Statement of Limited Warranty included with this printer, or at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
  • In other countries or regions —See the printed warranty that came with your printer.

Understanding the parts of the printer

Page 11 of the Lexmark 91E user manual — Understanding the parts of the printer
Page 11 · click to enlarge
Page 11

About your printer 11

Lexmark 91E — Understanding the parts of the printer diagram (page 11)
Fig. 2 · Understanding the parts of the printer
Use theTo 1Automatic Document Feeder (ADF) trayLoad original documents into the ADF for scanning, copying, or faxing. Note: Do not load postcards, photos, small items, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2ADF output trayHold documents as they exit from the ADF. 3Memory card slotInsert a memory card. 4PictBridge and USB portConnect a PictBridge-enabled digital camera or a flash drive to the printer. 5Paper exit trayHold paper as it exits. 6Paper tray (Tray 1)Load paper. 7Paper stopCatch the paper as it exits. 8Printer control panelOperate the printer. 9ADFScan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.

SD/MS-Duo/MMC

Page 12 of the Lexmark 91E user manual — Understanding the parts of the printer
Page 12 · click to enlarge
Page 12

About your printer 12

Lexmark 91E — Understanding the parts of the printer diagram (page 12)
Fig. 3 · Understanding the parts of the printer
Lexmark 91E — Understanding the parts of the printer diagram (page 12)
Fig. 4 · Understanding the parts of the printer
Use theTo 10Scanner unit• Access the ink cartridges and printhead. • Remove paper jams. 11Ink cartridge access areaInstall, replace, or remove ink cartridges. 12Ethernet portConnect your printer to a computer, a local network, an external DSL, or a cable modem. 13USB portConnect the printer to a computer using a USB cable. Warning—Potential Damage: Do not touch the USB port except when plugging in or removing a USB cable or installation cable. 14EXT portConnect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer, and if this connection method is supported in your country or region. Note: Remove the plug to access the port. 15LINE portConnect the printer to an active telephone line (through a standard wall jack, DSL filter, or VoIP adapter) to send and receive faxes. 16Power supply with portConnect the printer to a power source. 17Duplex unit• Print on both sides of a sheet of paper. • Remove paper jams. 18Printhead access areaInstall the printhead. Note: The carrier moves to the printhead access area when no printhead is installed in the printer. 19Jam clearance coverRemove jammed pages.
Page 13 of the Lexmark 91E user manual — Ordering and replacing supplies
Page 13 · click to enlarge
Page 13

Ordering and replacing supplies 13

Ordering and replacing supplies

Ordering ink cartridges

Lexmark Pro910 Series except Pro919

Lexmark 91E — Ordering and replacing supplies diagram (page 13)
Fig. 5 · Ordering and replacing supplies

1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.

2 Available only on the Lexmark Web site at www.lexmark.com.

Lexmark 91E — Ordering and replacing supplies diagram (page 13)
Fig. 6 · Ordering and replacing supplies

1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.

2 Available only on the Lexmark Web site at www.lexmark.com.

  • To get more ink, order high ‑ yield ink cartridges.
  • Depending on your country or region, you may get the ink cartridges individually or in packs.
  • You can order a mix of standard ink cartridges and high ‑ yield ink cartridges, depending on your needs.
  • Check the yield rate on the ink cartridge box, or visit <a href="http://www.lexmark.com/yields" rel="nofollow noopener" target="_blank">www.lexmark.com/yields</a> .
  • For best results, use only Lexmark ink cartridges.
  • The cartridges can be used for printing documents and photos.

Lexmark Pro919 model

Page 14 of the Lexmark 91E user manual — Installing ink cartridges
Page 14 · click to enlarge
Page 14

Ordering and replacing supplies 14

  • When storing new ink cartridges, make sure they are unopened and placed on their flat side.
  • Remove ink cartridges from their packaging only upon installation.

Using genuine Lexmark ink cartridges

Lexmark printers, ink cartridges, and photo paper are designed to perform together for superior print quality, and our inks are formulated to work with your printer and help extend the life of your product. We recommend that you use only genuine Lexmark ink cartridges.

Lexmark's warranty does not cover damage caused by non-Lexmark ink or ink cartridges.

Replacing ink cartridges

Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.

Removing ink cartridges

1 Turn on your printer.

2 Open the printer.

Lexmark 91E — Removing ink cartridges diagram (page 14)
Fig. 7 · Removing ink cartridges

3 Press the release tab, and then remove the used ink cartridge or cartridges.

Lexmark 91E — Removing ink cartridges diagram (page 14)
Fig. 8 · Removing ink cartridges
Lexmark 91E — Removing ink cartridges diagram (page 14)
Fig. 9 · Removing ink cartridges

Installing ink cartridges

1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge.

Page 15 of the Lexmark 91E user manual — Ordering paper and other supplies
Page 15 · click to enlarge
Page 15

Ordering and replacing supplies 15

If your ink cartridge comes with a twist cap, then remove the cap.

Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 10 · Ordering paper and other supplies
Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 11 · Ordering paper and other supplies
Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 12 · Ordering paper and other supplies

2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 13 · Ordering paper and other supplies
Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 14 · Ordering paper and other supplies
  • Insert the color cartridges first, and then the black cartridge.
  • Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.

3 Close the printer.

Ordering paper and other supplies

To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.

Lexmark 91E — Ordering paper and other supplies diagram (page 15)
Fig. 15 · Ordering paper and other supplies
Page 16 of the Lexmark 91E user manual — Recycling Lexmark products
Page 16 · click to enlarge
Page 16

Ordering and replacing supplies 16

  • Lexmark Photo Paper
  • Letter
  • A4
  • 4 x 6 in.
  • Lexmark PerfectFinish Photo Paper
  • Letter
  • A4
  • 4 x 6 in.
  • Availability may vary by country or region.
  • For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark PerfectFinish TM Photo Paper.
  • For more information, go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Visit our Web site at www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Paper Paper size

Page 17 of the Lexmark 91E user manual — Using the printer control panel buttons and menus
Page 17 · click to enlarge
Page 17

Using the printer control panel buttons and menus 17

Using the printer control panel buttons and menus

Using the printer control panel

1 2 3 4

Lexmark 91E — Using the printer control panel buttons and menus diagram (page 17)
Fig. 16 · Using the printer control panel buttons and menus
Lexmark 91E — Using the printer control panel buttons and menus diagram (page 17)
Fig. 17 · Using the printer control panel buttons and menus
  • 1 Power
  • Turn the printer on and off.
  • Switch to Sleep mode.
  • 2 Back
  • Return to the previous screen.
  • Exit from one menu level to a higher one.
  • Navigate the printer menus.
  • Change settings.
  • View printer messages and animation.

4 Start Start a job, depending on which mode is selected.

Page 18 of the Lexmark 91E user manual — Understanding the home screen
Page 18 · click to enlarge
Page 18

Using the printer control panel buttons and menus 18

Understanding the home screen

After the printer is turned on and a short warm-up period occurs, the display shows the home screen. Use the home screen selections to initiate an action, such as copying or faxing, or to change the printer settings.

1 2 3 4 5

Lexmark 91E — Understanding the home screen diagram (page 18)
Fig. 18 · Understanding the home screen
Lexmark 91E — Understanding the home screen diagram (page 18)
Fig. 19 · Understanding the home screen

View, select, print, or attach photos and documents to e‑mail.

  • View the current ink levels of the installed cartridges.
  • Access cartridge maintenance and information functions.
Page 19 of the Lexmark 91E user manual — Navigating menus using the touch screen
Page 19 · click to enlarge
Page 19

Using the printer control panel buttons and menus 19

Lexmark 91E — Navigating menus using the touch screen diagram (page 19)
Fig. 20 · Navigating menus using the touch screen

7 Setup icon Access the setup menu and change printer settings.

8 Eco‑Mode icon Activate Eco‑Mode to select the following options:

  • Change to Sleep mode after the printer is left idle for 10 minutes.
  • Set screen brightness to low.

Check the network connection status of your printer and access the network settings.

Navigating menus using the touch screen

Lexmark 91E — Navigating menus using the touch screen diagram (page 19)
Fig. 21 · Navigating menus using the touch screen
Lexmark 91E — Navigating menus using the touch screen diagram (page 19)
Fig. 22 · Navigating menus using the touch screen
Page 20 of the Lexmark 91E user manual — Changing the Sleep timeout
Page 20 · click to enlarge
Page 20

Using the printer control panel buttons and menus 20

Scroll up and down the menu list.

Scroll down.

  • Use your fingers to navigate the screen. The touch screen does not work if you use other tools or devices to navigate.
  • Drag the scroll bar or touch the arrows until the menu or setting that you want appears on the display.
  • Flick the screen by dragging your finger up or down the screen, and then lifting your finger off the screen. To navigate to the next or previous screen, flick sideways. It will have the same effect as selecting the left or right arrow.
  • To confirm a setting or select a menu or item, touch it.
  • If necessary, touch OK or Accept after making a selection or changing a setting.

For example, to navigate to Paper Type and select the default paper type setting:

1 Touch > Paper Setup > Paper Type.

2 Scroll up or down (using the scroll bar or arrows, or by flicking the screen up or down) to view the list of paper types.

3 Select a paper type setting by touching it, and then touch Accept to save the setting.

Changing the Sleep timeout

The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle. The Sleep feature optimizes energy efficiency by reducing the printer power consumption. To save the most energy, select the lowest Sleep timeout.

1 From the home screen, touch > Device Setup > Sleep.

2 Select a Sleep timeout, and then touch Accept.

Use To · 5 Scroll bar · 6 Down arrow

Page 21 of the Lexmark 91E user manual — Restoring factory default settings
Page 21 · click to enlarge
Page 21

Using the printer control panel buttons and menus 21

Saving paper and energy

To significantly cut paper usage and reduce paper waste, activate 2‑Sided Printing:

1 From the home screen, navigate to:

> Print Mode Setup > 2-Sided Copy, Standalone > On

2 Touch Accept.

To optimize energy efficiency, reduce the Sleep timeout and Screen Brightness:

1 From the home screen, navigate to:

2 Touch Sleep or Screen Brightness, and then adjust the setting.

3 Touch Accept.

Restoring factory default settings

Resetting to factory default settings will delete all the printer settings you have previously selected.

1 From the home screen, touch > Restore Factory Defaults > Restore All Printer Settings > Yes.

2 When prompted to set the initial settings of your printer, make your selections using the touch screen.

The printer restarts automatically after resetting to factory default settings.

> Device Setup

Page 22 of the Lexmark 91E user manual — Software installed during printer installation
Page 22 · click to enlarge
Page 22

Using the printer software 22

Using the printer software

Minimum system requirements

The printer software requires up to 500MB of free disk space.

Supported operating systems

  • Microsoft Windows 7 (SP1)
  • Microsoft Windows Server 2008 (R2 SP1)
  • Microsoft Windows Server 2008 (SP1)
  • Microsoft Windows Server 2003 (SP2)
  • Microsoft Windows Vista (SP1)
  • Microsoft Windows XP (SP3)
  • Macintosh Intel OS X version 10.7.0 or later
  • Macintosh Intel OS X version 10.6.0 or later
  • Macintosh Intel OS X version 10.5.0 or later
  • Macintosh Intel OS X version 10.4.4 or later
  • Macintosh PowerPC OS X version 10.5.0 or later
  • Macintosh PowerPC OS X version 10.4.0 or later
  • Ubuntu Linux 11.04, 10.10, 10.04, and 9.04 LTS *
  • Red Hat Enterprise Linux WS 6, WS 5, and WS 4 *
  • Red Flag Linux Desktop 6.0 *
  • SUSE Linux Enterprise Server 11 and 10 *
  • SUSE Linux Enterprise Desktop 11 and 10 *
  • Linux openSUSE 11.4, 11.3, and 11.2 *
  • Linpus Linux Desktop 9.6 *
  • Fedora 14 *
  • Debian GNU/Linux 6.0 and 5.0 *
  • Mint 10 and 9 *
  • PCLinux OS 2010 *

* The printer driver for this operating system is available only at http://support.lexmark.com.

Using the Windows printer software

Software installed during printer installation

When you set up the printer using the installation software CD, all the necessary software was installed. You may have chosen to install some additional programs. The following table provides an overview of various software programs and what they can help you do.

Page 23 of the Lexmark 91E user manual — Printer software
Page 23 · click to enlarge
Page 23

Using the printer software 23

If you did not install these additional programs during initial installation, then reinsert the installation software CD, run the installation software, and then click Advanced Options > Install Additional Software.

Printer software

LexmarkTM Printer Home

  • Launch applications or programs.
  • Scan or e ‑ mail a photo or document.
  • Edit scanned documents.
  • Scan documents to PDF.
  • Adjust settings for the printer.
  • Order supplies.
  • Maintain ink cartridges.
  • Register the printer.
  • Contact technical support.
  • Access the User's Guide .

(referred to as Printer Home)

Manage your fax contacts.

(referred to as Phone Book)

Abbyy Sprint OCR Scan a document and produce text that you can edit with a word‑processing program.

Lexmark Wireless Setup Utility (referred to as Wireless Setup Utility)

  • Set up the wireless printer on a wireless network.
  • Change the wireless settings of the printer.

Lexmark Tools for Office

Access your favorite settings in Microsoft Office 2007.

(referred to as Tools for Office)

Printer Setup Utility Configure the fax and e‑mail settings of your printer.

Status Messenger Learn more about the printing problems encountered.

  • Status Monitor Center
  • Check the supplies status of your printer.
  • Order supplies online.

Product Update Receive automatic notifications of updates to your printer software when new updates are available.

Use the To · Lexmark Phone Book

Page 24 of the Lexmark 91E user manual — Launching an application
Page 24 · click to enlarge
Page 24

Using the printer software 24

Printing Preferences When you click File > Print > Properties with a document open, a Printing Preferences dialog appears. The dialog lets you select options for the print job, such as the following:

  • Select the number of copies to print.
  • Print two ‑ sided copies.
  • Select the paper type.
  • Add a watermark.
  • Enhance images.
  • Save settings.

Using the Macintosh printer software

Launching the Print dialog

Use the Print dialog to adjust the print settings and schedule print jobs.

With a document or photo open, choose File > Print.

Launching an application

1 From the Finder, navigate to:

Applications > select your printer folder

2 Double‑click the application that you want to use.

  • Printer Settings
  • Customize settings for fax jobs.
  • Create and edit the Contacts list.
  • Configure e ‑ mail connectivity settings.
  • Configure the language, country, date, and time.

Shortcuts Speed up usual tasks with your printer.

Set up the printer on a wireless network.

Uninstaller Remove the printer software from your computer.

  • Your printer may not come with these applications, depending on the features of the printer that you purchased or the installation type (standard or custom) chosen when you installed the printer.

Use the To · Use the To · Wireless Setup Assistant

Page 25 of the Lexmark 91E user manual — For Macintosh users
Page 25 · click to enlarge
Page 25

Using the printer software 25

  • To take advantage of the full features of your printer, select the custom install option during installation, and then select all packages listed.

Accessing Web links

Web links are links to predefined Web pages that are saved in the printer folder.

1 From the Finder, navigate to:

Applications > select your printer folder > Web Links

2 Double‑click the Web link that you want to visit.

Customer Support Contact customer support.

Lexmark Software Updates Download and install the latest printer software.

Lexmark Online Visit the Lexmark Web site.

Order Supplies Online Order ink or supplies.

Printer Registration Register your printer.

  • Visit Lexmark SmartSolutions
  • Visit the SmartSolutions Web site.
  • Choose your custom solutions.

Finding and installing optional software

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Navigate to:

Printer Home > select your printer > Support > Online support

4 From the Web site, select your printer and then download the driver.

5 Install additional or optional software.

For Macintosh users

1 From the Finder, navigate to:

Applications > select your printer folder > Web Links > Lexmark Software Updates

2 From the Web site, select your printer and then download the driver.

3 Install additional or optional software.

Use To · 1 Click

Page 26 of the Lexmark 91E user manual — For Macintosh users
Page 26 · click to enlarge
Page 26

Using the printer software 26

Updating the printer software

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Select your printer, and then click Product Update.

4 Follow the instructions on the computer screen.

For Macintosh users

1 From the Finder, navigate to:

Applications > select your printer folder > Web Links > Lexmark Software Updates

2 From the Web site, select your printer and then download the driver.

Downloading PCL and PS drivers (Windows only)

Universal Print Drivers (PCL 5 emulation, PCL XL emulation, and PS emulation) can be downloaded from our Web site. You need to search for your printer model to view compatible drivers.

Reinstalling the printer software

When you set up the printer using the installation software CD, all the necessary software was installed. If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when you send a print job, then try uninstalling and reinstalling the printer.

Uninstalling the printer software

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Click the uninstaller.

4 Follow the instructions on the computer screen.

5 Once the uninstall process is complete, restart your computer.

For Macintosh users

1 Close all open applications.

2 From the Finder, navigate to:

Applications > select your printer folder

1 Click · 1 Click

Page 27 of the Lexmark 91E user manual — Using the Internet
Page 27 · click to enlarge
Page 27

Using the printer software 27

3 Double‑click Uninstaller.

4 Follow the instructions on the computer screen.

Installing the printer software

For Windows users

1 Close all open software programs.

2 Insert the installation software CD.

If the installation dialog screen does not appear after a minute, then launch the CD manually:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

For Macintosh users

1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double-click the software installer package, and then follow the instructions on the computer screen.

Using the Internet

1 Go to the Lexmark Web site at http://support.lexmark.com.

2 Navigate to:

SUPPORT & DOWNLOADS > select your printer > select your operating system

3 Download the driver, and then install the printer software.

a Click

Page 28 of the Lexmark 91E user manual — Loading paper and original documents
Page 28 · click to enlarge
Page 28

Loading paper and original documents 28

Loading paper and original documents

Loading the paper tray

Make sure:

  • You use paper designed for inkjet printers.
  • The paper is not used or damaged.
  • If you are using specialty paper, you follow the instructions that came with it.
  • The paper does not buckle when you adjust the paper guides to avoid jams.

1 Pull the tray completely out of the printer.

Lexmark 91E — Loading paper and original documents diagram (page 28)
Fig. 23 · Loading paper and original documents

2 Move the paper guides to the sides of the tray.

Lexmark 91E — Loading paper and original documents diagram (page 28)
Fig. 24 · Loading paper and original documents
Lexmark 91E — Loading paper and original documents diagram (page 28)
Fig. 25 · Loading paper and original documents
Page 29 of the Lexmark 91E user manual — Loading paper and original documents
Page 29 · click to enlarge
Page 29

Loading paper and original documents 29

3 If you are loading A4‑ or legal‑size paper, then squeeze the tab and pull to extend the tray.

Lexmark 91E — Loading paper and original documents diagram (page 29)
Fig. 26 · Loading paper and original documents
Lexmark 91E — Loading paper and original documents diagram (page 29)
Fig. 27 · Loading paper and original documents

4 Load the paper facedown.

Lexmark 91E — Loading paper and original documents diagram (page 29)
Fig. 28 · Loading paper and original documents

5 Adjust the paper guides to rest gently against the left, right, and bottom edges of the paper.

Lexmark 91E — Loading paper and original documents diagram (page 29)
Fig. 29 · Loading paper and original documents
Page 30 of the Lexmark 91E user manual — Loading envelopes or photo paper
Page 30 · click to enlarge
Page 30

Loading paper and original documents 30

6 Insert the tray.

Lexmark 91E — Loading envelopes or photo paper diagram (page 30)
Fig. 30 · Loading envelopes or photo paper

7 Flip up the paper stop to catch the paper as it exits.

Lexmark 91E — Loading envelopes or photo paper diagram (page 30)
Fig. 31 · Loading envelopes or photo paper
Lexmark 91E — Loading envelopes or photo paper diagram (page 30)
Fig. 32 · Loading envelopes or photo paper

Loading envelopes or photo paper

1 Pull tray completely out of the printer.

Page 31 of the Lexmark 91E user manual — Loading envelopes or photo paper
Page 31 · click to enlarge
Page 31

Loading paper and original documents 31

2 Move the paper guides to the sides of tray.

3 Use the envelope icon and the photo paper outline on the bottom of the tray to help you position envelopes or photo paper.

Lexmark 91E — Loading envelopes or photo paper diagram (page 31)
Fig. 33 · Loading envelopes or photo paper

4 Load envelopes or photo paper.

Page 32 of the Lexmark 91E user manual — Loading envelopes or photo paper
Page 32 · click to enlarge
Page 32

Loading paper and original documents 32

Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 34 · Loading envelopes or photo paper
Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 35 · Loading envelopes or photo paper
Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 36 · Loading envelopes or photo paper

5 Adjust the paper guides to rest gently against the left, right, and bottom edges of the envelopes or photo paper.

Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 37 · Loading envelopes or photo paper
Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 38 · Loading envelopes or photo paper

6 Insert the tray.

Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 39 · Loading envelopes or photo paper
Lexmark 91E — Loading envelopes or photo paper diagram (page 32)
Fig. 40 · Loading envelopes or photo paper
Page 33 of the Lexmark 91E user manual — Loading various paper types
Page 33 · click to enlarge
Page 33

Loading paper and original documents 33

7 Flip up the paper stop to catch the envelopes or photos as they exit.

Loading various paper types

Load up to Make sure

  • 150 sheets of plain paper
  • The paper is designed for use with inkjet printers.
  • The paper guides rest against the left, right, and bottom edges of the paper.

100 sheets of coated paper 25 sheets of photo paper

  • The glossy or printable side of the paper faces down. (If you are not sure which side is the printable side, then see the instructions that came with the paper.)
  • The paper guides rest against the left, right, and bottom edges of the paper.

25 sheets of glossy paper

  • For best results, allow photos to dry at least 24 hours before stacking, displaying, or storing.
  • For best results, load more photo paper than needed, but do not exceed the maximum amount for your paper type.
Page 34 of the Lexmark 91E user manual — Loading various paper types
Page 34 · click to enlarge
Page 34

Loading paper and original documents 34

Load up to Make sure

Lexmark 91E — Loading various paper types diagram (page 34)
Fig. 41 · Loading various paper types
  • The envelopes are designed for use with inkjet printers.
  • The print side of the envelopes faces down with the flap to the left as shown.
  • You load the envelopes in the center of the tray as indicated by the icon. Load them all the way to the back of the tray.
  • You print the envelopes in landscape orientation.
  • The paper guides rest against the left, right, and bottom edges of the envelopes.
  • You select the correct envelope size. If the exact envelope size is not listed, then select the next larger size. Set the left and right margins so that the envelope text will be correctly positioned on the envelope.
  • Do not load envelopes with holes, perforations, cutouts, or deep embossing.
  • Do not use envelopes that have exposed flap adhesive.
  • 25 sheets of labels
  • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.
  • You load letter ‑ or A4 ‑ size label sheets.
  • The print side of the labels faces down.
  • The top of the labels feeds into the printer first.
  • The paper guides rest against the left, right, and bottom edges of the label sheets.

10 envelopes

Page 35 of the Lexmark 91E user manual — Loading various paper types
Page 35 · click to enlarge
Page 35

Loading paper and original documents 35

Load up to Make sure

  • 50 transparencies
  • The rough side of the transparencies faces down.
  • You load letter ‑ or A4 ‑ size transparencies.
  • You remove any paper backing sheets from the transparencies before loading.
  • If the transparencies have a removable strip, then each strip faces down.
  • The paper guides rest against the left, right, and bottom edges of the transparencies.
  • 10 iron-on transfers
  • You follow the loading instructions that came with the iron-on transfers.
  • The print side of the transfers faces down.
  • The paper guides rest against the edges of the transfers.
  • 25 index cards, photo papers, or postcards
  • The thickness does not exceed 0.025 inches (0.635 mm).
  • The print side of the photo paper faces down.
  • You load the photo paper in the center of the tray, as indicated by the 4 x 6 ‑ inch photo paper outline.
  • The paper guides rest against the left, right, and bottom edges of the paper.
Lexmark 91E — Loading various paper types diagram (page 35)
Fig. 42 · Loading various paper types
Page 36 of the Lexmark 91E user manual — Loading original documents on the scanner glass
Page 36 · click to enlarge
Page 36

Loading paper and original documents 36

Saving paper settings

You can adjust the settings for your print and copy jobs to match the paper size and type you have loaded in the printer.

1 From the home screen, touch > Paper Setup.

  • 2 Adjust the settings, if necessary:
  • If you want to set the paper size, then navigate to: Paper Size > select the default paper size > Accept
  • If you want to set the paper type, then navigate to: Paper Type > select the default paper type > Accept

Loading original documents on the scanner glass

1 Open the scanner lid and place the document facedown on the scanner glass.

2 Close the scanner lid.

Lexmark 91E — Loading original documents on the scanner glass diagram (page 36)
Fig. 43 · Loading original documents on the scanner glass
Lexmark 91E — Loading original documents on the scanner glass diagram (page 36)
Fig. 44 · Loading original documents on the scanner glass
Lexmark 91E — Loading original documents on the scanner glass diagram (page 36)
Fig. 45 · Loading original documents on the scanner glass
Page 37 of the Lexmark 91E user manual — Linking trays
Page 37 · click to enlarge
Page 37

Loading paper and original documents 37

Loading original documents into the ADF

You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4‑, letter‑, or legal‑size paper into the ADF.

1 Adjust the paper guide on the ADF tray to the width of the original document.

2 Load the original document faceup and top edge first into the ADF until you hear a sound from the ADF.

Lexmark 91E — Loading original documents into the ADF diagram (page 37)
Fig. 46 · Loading original documents into the ADF
Lexmark 91E — Loading original documents into the ADF diagram (page 37)
Fig. 47 · Loading original documents into the ADF

Linking trays

Tray linking is useful for large print jobs or multiple copies. When Paper Tray Linking is enabled, the printer automatically picks up paper from the optional tray.

From the home screen, touch > Paper Setup > Tray Linking > Automatic > Accept.

  • Optional trays are purchased separately. For more information, contact the place where you purchased the printer.
  • Make sure the printer is off before installing the optional tray.
  • The paper type and paper size in the default paper tray and the optional tray should match to avoid a media type mismatch error.
Page 38 of the Lexmark 91E user manual — For Macintosh users
Page 38 · click to enlarge
Page 38

Printing

Tips for printing

  • Use the appropriate paper for your print job.
  • Select a higher print quality for better prints.
  • Make sure there is enough ink in the ink cartridges.
  • Remove each sheet as it is printed when printing photos or when working with specialty media.
  • Do not touch the duplex latch or latches while actively printing.

Printing basic documents

Printing a document

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Select the print quality, the number of copies to print, the type of paper to use, and how the pages should print.

4 Click OK to close any printer software dialogs.

5 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the print options menu, choose the print quality, the number of copies to print, the type of paper to use, and how the pages should print.

7 Click Print.

Printing 38

Page 39 of the Lexmark 91E user manual — For Windows users
Page 39 · click to enlarge
Page 39

Collating printed copies

When printing multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).

  • The collate option is available only when you are printing multiple copies.
  • To prevent smudging when printing photos, remove each photo as it exits the printer, and then let it dry before stacking.

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Layout tab > Copies area

4 Enter the number of copies that you want to print, and then select Collate.

5 Click OK to close any printer software dialogs.

6 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the Copies area, enter the number of copies that you want to print, and then select Collated.

7 Click Print.

Changing the print order of pages

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Layout tab > Copies area

Printing 39 · Collated Not collated

Page 40 of the Lexmark 91E user manual — For Macintosh users
Page 40 · click to enlarge
Page 40

4 To change the current page order, select the Reverse page order check box.

5 Click OK to close any printer software dialogs.

6 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the print options pop-up menu, choose Paper Handling.

  • 7 From the Page Order pop ‑ up menu, choose a page order:
  • To print the first page first, choose Normal .
  • To print the last page first, choose Reverse .

8 Click Print.

Printing multiple pages on one sheet

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Layout tab > Page Layouts area > select Multiple pages per side (N‑Up)

4 Select the number of page images to print on each side.

5 Adjust other settings as needed.

6 Click OK to close any printer software dialogs.

7 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the print options pop‑up menu, choose Layout.

7 From the Pages per Sheet pop‑up menu, choose the number of page images to print on each page.

Printing 40

Page 41 of the Lexmark 91E user manual — For Macintosh users
Page 41 · click to enlarge
Page 41

8 Adjust other settings as needed.

9 Click Print.

Printing documents from a memory card or flash drive

To enable the File Print function, the memory card or flash drive must contain document files that are supported by the printer. For more information, see “Supported memory cards and file types” on page 45.

1 Insert a memory card or flash drive.

The Memory Device screen appears on the display.

2 Touch Print Documents.

3 Select the document that you want to print, and then press .

Printing specialty documents

Printing envelopes

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Paper/Finishing tab > Paper size list > select your envelope size

If no size matches the envelope size, then click Manage Custom Sizes and set a custom size.

4 Navigate to:

Paper type list > select Envelope

5 Navigate to:

Layout tab > Page Orientation area > select an orientation

6 Click OK to close any printer software dialogs.

7 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the “Format for” pop‑up menu, choose your printer.

3 From the Paper Size pop‑up menu, choose your envelope size.

If no size matches the envelope size, then set a custom size.

4 Select an orientation, and then click OK.

5 From the menu bar, choose File > Print.

Printing 41

Page 42 of the Lexmark 91E user manual — For Macintosh users
Page 42 · click to enlarge
Page 42

6 From the Printer pop‑up menu, choose your printer.

7 Click Print.

  • Most envelopes use landscape orientation.
  • Make sure the same orientation is also selected in the application.

Printing on labels

  • Make sure the top of the label sheet feeds into the printer first.
  • Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.
  • Make sure the paper guide or paper guides rest against the edges of the label sheet.
  • Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Paper/Finishing tab > Manage Custom Sizes > New

4 Type a name and adjust the settings as needed to create a custom size, and then click OK.

5 Navigate to:

Paper type list > select the created custom type

6 Click OK to close any printer software dialogs.

7 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the “Format for” pop‑up menu, choose your printer.

3 From the Paper Size pop‑up menu, choose your paper size.

If no paper size matches the label sheet size, then set a custom size.

4 Select an orientation, and then click OK.

5 From the menu bar, choose File > Print.

6 From the Printer pop‑up menu, choose your printer.

7 From the print options pop‑up menu, choose Quality & Media.

8 From the Paper Type pop‑up menu, choose Labels.

Printing 42

Page 43 of the Lexmark 91E user manual — For Macintosh users
Page 43 · click to enlarge
Page 43

9 From the Print Quality menu, choose a print quality other than Quick Print or Draft.

10 Click Print.

Printing on custom ‑ size paper

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Paper/Finishing tab > Manage Custom Sizes > New

4 Type a name and adjust the settings as needed to create a custom size, and then click OK.

5 Click Close, and then click OK to close any printer software dialogs.

6 Click OK or Print.

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the “Format for” pop‑up menu, choose your printer.

3 From the Paper Size pop‑up menu, choose Manage Custom Sizes.

4 Adjust the settings as needed to create a custom size, and then click OK.

5 Click OK.

6 From the menu bar, choose File > Print.

7 From the printer pop‑up menu, choose your printer.

8 Click Print.

Printing 43

Page 44 of the Lexmark 91E user manual — FLASH DRIVE
Page 44 · click to enlarge
Page 44

Working with photos

Using a memory card or flash drive with the printer

Insert a memory card into the card slot or a flash drive into the USB port

Inserting a memory card Inserting a flash drive

Lexmark 91E — Using a memory card or flash drive with the printer diagram (page 44)
Fig. 48 · Using a memory card or flash drive with the printer

FLASH DRIVE

  • Insert the card with the brand name label facing up.
  • Make sure any arrows on the card point toward the printer.
  • If necessary, connect the memory card to the adapter that came with it.
  • Make sure that the memory card inserted is supported by the printer. For more information, see “Supported memory cards and file types” on page 45.
  • The card reader light comes on when a memory card is inserted and blinks when a memory card is being accessed.
  • The flash drive uses the same port that is used for a PictBridge camera cable.
  • An adapter may be necessary if your flash drive does not fit directly into the port.
Lexmark 91E — FLASH DRIVE diagram (page 44)
Fig. 49

FLASH DRIVE

The Memory Device screen appears on the display.

  • If the printer does not recognize the memory device, then remove and reinsert it.
  • If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is in the card slot, then the display prompts you to choose which memory device to use.
Show 4 more labels / short text on this page
Printing 44 · SD/MS-Duo/MMC · SD/MS-Duo/MMC · SD/MS-Duo/MMC
Page 45 of the Lexmark 91E user manual — Tips:
Page 45 · click to enlarge
Page 45

Supported memory cards and file types

Memory card File type

  • Secure Digital (SD)
  • Secure Digital High Capacity (SDHC)
  • Micro Secure Digital (with adapter) (Micro SD)
  • Mini Secure Digital (with adapter) (Mini SD)
  • MultiMedia Card (MMC)
  • Reduced Size MultiMedia Card (with adapter) (RS ‑ MMC)
  • MultiMedia Card mobile (with adapter) (MMCmobile)
  • Memory Stick Duo
  • Memory Stick PRO Duo

Documents:

  • .pdf (Adobe Portable Document Format)

Images:

  • .jpg, .jpeg, .jpe (Joint Photographic Experts Group)
  • .tiff, .tif (Tagged Image File Format)

Printing photos using the printer control panel

1 Load photo paper.

2 Insert a memory card, flash drive, or digital camera set to mass storage mode.

The Memory Device screen appears on the display.

3 Touch View Photos.

The Select Photos screen appears.

4 Touch the photo or photos you want to print.

Tips:

  • If you want to clear a selected photo, then touch the photo again.
  • If you want to view more photos, then touch the left or right arrow, and then touch the photo to select it.

5 When you are finished selecting the photos you want to print, touch Layout.

6 If you want to change the print settings, then touch Change Settings.

If necessary, touch Accept each time you make a selection.

7 Press .

Printing 45

Page 46 of the Lexmark 91E user manual — FLASH DRIVE
Page 46 · click to enlarge
Page 46

Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer.

1 Insert one end of the USB cable into the camera.

2 Insert the other end of the cable into the PictBridge port on the front of the printer.

  • Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the printer control panel. For more information, see the camera documentation.
  • The printer reads only one memory device at a time.

FLASH DRIVE

3 If the PictBridge connection is successful, then the following message appears on the display: Camera Connected. Use Camera to choose and print photos.

4 If you want to change the default print settings: a Touch More Options to access the PictBridge menu. b Select the paper source, paper size, paper type, photo size, quality, and layout of the photos that you want to

print. Touch Accept each time you make a selection.

5 See the documentation for your camera to begin printing.

Printing 46 · SD/MS-Duo/MMC · SD/MS-Duo/MMC

Page 47 of the Lexmark 91E user manual — For Macintosh users
Page 47 · click to enlarge
Page 47

Printing on both sides of the paper (duplexing)

Printing on both sides of the paper (duplexing) automatically

  • The automatic duplex unit supports A4 ‑ and letter ‑ size paper. It also supports plain, premium plain, ColorLok certified plain, heavy plain, and letterhead paper types.
  • Do not remove the page until printing is finished.

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Layout tab > Print on Both Sides (Duplex) area > Print on both sides

  • Click Long edge for print jobs with pages that are bound along the long edge of the page.
  • Click Short edge for print jobs with pages that are bound along the short edge of the page.

4 Click the Paper/Finishing tab, and then select a supported paper type.

5 Click OK to close any printer software dialogs.

6 Click OK or Print.

To return to single-sided printing, repeat steps 1 and 2, and then navigate to:

Layout tab > Print on Both Sides (Duplex) area > Print on one side only

For Macintosh users

1 With a document open, choose File > Page Setup.

2 From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the print options pop‑up menu, choose Quality & Media.

7 From the Paper Type pop‑up menu, choose a supported paper type.

8 From the print options pop‑up menu, choose Layout.

Printing 47

Page 48 of the Lexmark 91E user manual — Using the printer software
Page 48 · click to enlarge
Page 48

9 From the Two‑Sided pop‑up menu, choose Long‑Edge binding or Short‑Edge binding. • For Long‑Edge binding, pages are bound along the long edge of the page (left edge for portrait, top edge for landscape).

  • For Short ‑ Edge binding, pages are bound along the short edge of the page (top edge for portrait, left edge for landscape).
Lexmark 91E — Setting the duplex printing dry time diagram (page 48)
Fig. 50 · Setting the duplex printing dry time
Lexmark 91E — Setting the duplex printing dry time diagram (page 48)
Fig. 51 · Setting the duplex printing dry time

10 Click Print.

Setting the duplex printing dry time

Using the control panel

1 From the home screen, touch >Print Mode Setup > Page Dry Time.

2 Select the dry time setting, and then touch Accept.

Using the printer software

1 Click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Layout tab > Print on Both Sides (Duplex) area > select a dry time setting

4 Click OK.

Show 4 more labels / short text on this page
Printing 48 · Portrait Landscape · Portrait Landscape · For Windows users
Page 49 of the Lexmark 91E user manual — For Macintosh users
Page 49 · click to enlarge
Page 49

1 From the Apple menu, navigate to:

System Preferences > Print & Fax > select your printer

2 Navigate to:

Open Print Queue > Printer Setup > Driver tab

Printer Setup > Installable Options

3 From the Two‑Sided Printing Dry Time pop‑up menu, choose a dry time setting.

4 Click OK or Apply Changes.

Managing print jobs

Finding the print queue for your printer

A print queue represents the printer that is connected to your computer. The print queue name is usually the printer model or the printer nickname assigned when installing or adding the printer.

For Windows users

1 Open the printers folder.

, or click Start and then click Run. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK.

2 Find the print queue for your printer (Network or USB).

3 If the print queue is not in the list, then create a new print queue.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Print & Fax > the print queue for your printer

2 If the print queue is not in the list, then create a new print queue.

Show 4 more labels / short text on this page
Printing 49 · For Macintosh users · or · a Click
Page 50 of the Lexmark 91E user manual — For Macintosh users
Page 50 · click to enlarge
Page 50

Creating a print queue

1 From the Printer Tasks area, click Add a Printer.

2 Follow the instructions on the computer screen.

For more information, see the documentation that came with your operating system.

1 From the Print & Fax area, click +.

2 If necessary, click the Default or Default Browser tab.

3 Select your printer from the list.

4 Click Add.

Setting your printer as the default printer

Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually select your printer, then it is not the default printer.

To set the default printer:

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printers folder opens.

4 Right‑click the printer, and then select Set as Default Printer.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Print & Fax

2 Select the printer from the Default Printer pop‑up menu, or select the printer and click Make Default.

Show 4 more labels / short text on this page
Printing 50 · For Windows users · For Macintosh users · 1 Click
Page 51 of the Lexmark 91E user manual — For Macintosh users
Page 51 · click to enlarge
Page 51

Changing the default printing mode

To conserve ink, you can change the default printing mode for all print jobs to Draft or Quick Print. It uses less ink and is recommended for printing text-only documents. If you need to change to a different print mode to print photos or other high-quality documents, then you can select a different mode from the Print dialog before sending the print job.

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Quality tab > select a print quality > OK

For Macintosh users

1 With a document open, choose File > Print.

2 From the printer pop‑up menu, choose your printer.

3 From the print options pop-up menu, choose Quality & Media.

4 From the Print Quality pop‑up menu, choose a print quality.

5 Click OK.

Pausing print jobs

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printers folder opens.

4 Right‑click the printer, and then select Open or See what's printing.

  • 5 Pause the print job:
  • If you want to pause a particular print job, then right ‑ click the document name, and then select Pause .
  • If you want to pause all print jobs in the queue, then click Printer , and then select Pause Printing .

For Macintosh users

1 Click the printer icon on the Dock.

The print queue dialog appears.

  • 2 Pause the print job:
  • If you want to pause a particular print job, then choose the document name, and then click Hold .
  • If you want to pause all print jobs in the queue, then click Pause Printer or Stop Jobs .

Printing 51 · 1 Click

Page 52 of the Lexmark 91E user manual — For Windows users
Page 52 · click to enlarge
Page 52

Resuming print jobs

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printers folder opens.

4 Right‑click the printer, and then select Open or See what's printing.

  • 5 Resume the print job:
  • If you want to resume a particular print job, then right ‑ click the document name, and then select Resume or Restart .
  • If you want to resume all print jobs in the queue, then click Printer , and then clear the selection for Pause Printing.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Print & Fax > select your printer

2 Click Open Print Queue or Set Up Printers.

The print queue dialog appears.

  • 3 Resume the print job:
  • If you want to resume a particular print job, then choose the document name, and then click Resume .
  • If you want to resume all print jobs in the queue, then click Resume Printer or Start Jobs .

Canceling print jobs

To cancel a print job from the printer control panel, press . To cancel a print job from the computer, do the following:

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printers folder opens.

4 Right‑click the printer, and then select Open or See what's printing.

  • 5 Cancel the print job:
  • If you want to cancel a particular print job, then right ‑ click the document name, and then select Cancel .
  • If you want to cancel all print jobs in the queue, then click Printer > Cancel All Documents .

Printing 52 · 1 Click · 1 Click

Page 53 of the Lexmark 91E user manual — Supported printers
Page 53 · click to enlarge
Page 53

For Macintosh users

1 Click the printer icon on the Dock.

The print queue dialog appears.

2 Choose the job you want to cancel, and then click Delete.

Printing from a mobile device

What is LexPrint?

LexPrint is a free application that lets you print easily from your iPad, iPhone, or iPod touch using any Lexmark printer connected to the same wireless network. It lets you print Web pages, photos from the photo album, or photos you recently captured using the camera of your mobile device, depending on its features. You can also customize print settings from your mobile device.

Depending on your Lexmark printer model, you may need to download the LexPrint Listener application from our Web site at www.lexmark.com/lexprint.

Supported printers

LexPrint enables your mobile device to communicate with Lexmark printers found on the same network.

  • For select printer models that support Direct Image and Zeroconf or Bonjour, you can print directly from your mobile device to the printer without using LexPrint Listener. To check if your printer model supports these features, visit <a href="http://www.lexmark.com/lexprint" rel="nofollow noopener" target="_blank">www.lexmark.com/lexprint</a> .
  • For other Lexmark printers, your mobile device can send print jobs to your printer as long as the printer software and LexPrint Listener are installed on the computer where the printer is connected.

Printing 53

Page 54 of the Lexmark 91E user manual — Making copies
Page 54 · click to enlarge
Page 54
Lexmark 91E — Copying diagram (page 54)
Fig. 52 · Copying

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Tips for copying

  • Make sure you load the original document faceup into the ADF or facedown at the placement corner of the scanner glass.
  • When using the ADF, adjust the paper guide on the ADF to the width of the original document.
  • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  • When the document to be copied is in place with the settings you want, press to start copying.

Making copies

1 Load the original document.

2 From the home screen, navigate to:

Copy > More Options > Number of Copies

3 Enter the number of copies you want to print, and then touch Accept.

4 Press , and then touch Color or Black/White to set a color or black-and-white copy.

5 Press .

Copying 54

Page 55 of the Lexmark 91E user manual — Making a copy lighter or darker
Page 55 · click to enlarge
Page 55

Copying an ID card

1 From the home screen, touch SmartSolutions > ID Card Copy.

2 Load the front side of the ID card facedown on the upper left corner of the scanner glass.

3 Touch Continue.

4 When prompted to copy the back side of the ID card, touch Yes.

5 Load the back side of the ID card facedown on the upper left corner of the scanner glass.

6 Touch Continue to start printing.

Enlarging or reducing images

1 Load the original document.

2 From the home screen, touch Copy > More Options > Scale.

3 Select a scale setting, and then touch Accept.

  • If you select Fit To Page, then the printer scales the document or photo proportionately to fit a single page.
  • If you select Custom %, then specify the scale setting from 25% to 400%.

4 Press .

Adjusting copy quality

1 Load the original document.

2 From the home screen, navigate to:

Copy > More Options > Quality

3 Set the copy quality, and then touch Accept.

4 Press .

Making a copy lighter or darker

1 Load the original document.

2 From the home screen, touch Copy > More Options > Darkness.

3 Use the slider to change the darkness level, and then touch Accept.

4 Press .

Copying 55

Page 56 of the Lexmark 91E user manual — Copying multiple pages on one sheet
Page 56 · click to enlarge
Page 56

Collating copies using the printer control panel

When printing multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).

1 Load the original document.

2 From the home screen, touch Copy > More Options > Number of Copies.

3 Enter the number of copies you want to print, and then touch Accept.

4 Scroll to Collate, and then touch 2 1 2 1.

5 Press .

Placing separator sheets between copies

A separator sheet is a sheet of paper placed between pages, copies, or jobs based on the value selected. This feature is useful when printing transparencies.

1 Load the original document.

2 From the home screen, touch Copy > More Options > Separator Sheets.

3 Select a separator sheets setting, and then touch Accept.

4 Press .

Copying multiple pages on one sheet

You can copy multiple pages on one sheet by printing smaller images of each page. For example, you can condense a 20‑page document into five pages if you use this setting to print four page images per sheet.

1 Load the original document.

2 From the home screen, touch Copy > More Options > Pages per Side.

3 Select the paper orientation and the number of pages that you want to copy on a sheet of paper, and then touch Accept. You may print up to four page images on a sheet of paper.

4 Press .

Copying 56 · Collated Not collated

Page 57 of the Lexmark 91E user manual — Making a two ‑ sided (duplex) copy automatically
Page 57 · click to enlarge
Page 57

Placing an overlay message on each page

1 Load the original document.

2 From the home screen, touch Copy > More Options > Overlay.

3 Select an overlay setting, and then touch Accept.

4 Press .

Removing the background of a copy

The Background Removal feature adjusts the amount of background visible on a copy.

1 From the home screen, touch Copy > More Options > Background Removal.

2 Select the background removal setting, and then touch Accept.

3 Press .

Making a duplex copy

Making a two ‑ sided (duplex) copy automatically

The automatic duplex unit supports A4- and letter-size paper. If you need to make two‑sided copies using other paper sizes, then see the instructions for making a two‑sided copy manually.

1 Load the original document faceup into the ADF or facedown on the scanner glass.

2 From the home screen, touch Copy > More Options > 2‑Sided Copies.

  • 3 Select a two ‑ sided copying option, and then touch Accept .
  • If you are copying a one-sided document, then select 1 ‑ Sided to 2 ‑ Sided .
  • If you are copying a two-sided document and using the scanner glass, then select 2 ‑ Sided to 2 ‑ Sided .
  • If you want to specify the page orientation and layout of the original document and the copy, then select Advanced . Touch Accept every time you make a selection.
  • For long-edged binding, pages are bound along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation).
  • For short-edged binding, pages are bound along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation).

4 Press , and then follow the instructions on the display.

Copying 57

Page 58 of the Lexmark 91E user manual — Canceling copy jobs
Page 58 · click to enlarge
Page 58

Making a duplex copy manually

1 Load the original document.

2 From the home screen, touch Copy.

3 Set the copy options you want. If necessary, touch Accept each time you make a selection.

4 Press to print on one side of the paper.

  • 5 Load the next page of the document:
  • If you are copying a one ‑ sided document, then load the next page.
  • If you are copying a two ‑ sided document, then flip the original document, and then reload it.

6 Remove the paper from the exit bin, and then reload the paper to print the other side of the document.

Lexmark 91E — Making a duplex copy manually diagram (page 58)
Fig. 53 · Making a duplex copy manually

7 When prompted to use the current settings, touch Yes.

8 Press .

Canceling copy jobs

To cancel a copy job, press .

Scanning stops and the printer returns to the previous menu.

Copying 58

Page 59 of the Lexmark 91E user manual — Scanning to a local computer
Page 59 · click to enlarge
Page 59
Lexmark 91E — Scanning diagram (page 59)
Fig. 54 · Scanning

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Tips for scanning

  • Use the scanner glass when scanning two ‑ sided pages if your printer does not support duplex scanning or the ADF does not support the original document size.
  • When using the ADF, adjust the paper guide on the ADF to the width of the original document.
  • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  • When the document to be scanned is in place with the settings you want, press to start scanning.

Scanning to a local computer

1 Load the original document.

2 From the home screen, touch Scan > Computer > USB‑Connected Computer.

The USB‑connected computer is the default destination that will receive the scan.

3 Select the output file type you want to create and other scan options. If necessary, touch Accept each time you make a selection.

4 Press .

Scanning 59

Page 60 of the Lexmark 91E user manual — Scanning to a flash drive or memory card
Page 60 · click to enlarge
Page 60

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning to a network computer

1 Load the original document.

2 From the home screen, touch Scan > Computer.

3 Touch the name of the destination computer.

  • Make sure the scan software is installed on the destination computer.
  • Make sure the printer can communicate with the destination computer.
  • You may be prompted to enter a PIN if the computer requires it.
  • To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4 Select the output file type you want to create and other scan options. If necessary, touch Accept each time you make a selection.

5 Press .

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write‑protected.

1 Load the original document.

2 From the home screen, touch Scan > Memory Device.

3 Insert the flash drive or memory card.

  • The printer reads only one memory device at a time.
  • If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears on the display prompting you to select which memory device to use.

4 Select the output file type you want to create.

5 Set the color, quality, original image size, and the other scan options. If necessary, touch Accept each time you make a selection.

6 Press , and then follow the instructions on the display.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning 60

Page 61 of the Lexmark 91E user manual — For Macintosh users
Page 61 · click to enlarge
Page 61

Scanning photos for editing

For Windows users

1 Load photo or photos facedown on the scanner glass.

or Start.

3 Click All Programs or Programs, and then select the printer program folder from the list.

4 Navigate to:

Printer Home > select your printer > Scan

  • If you want to scan a single photo, or multiple photos as a single image, then select Single photo .
  • If you want to scan multiple photos at once and save them as separate images, then select Multiple photos .

Scanning starts and the scan progress dialog appears.

5 Save the photo or photos, and open them in a photo editing application to edit.

For Macintosh users

1 Load photo or photos facedown on the scanner glass.

2 From the Applications folder in the Finder, launch the application you want to use.

3 From the list of devices, select your printer.

4 Adjust the scan settings as needed.

If applicable, click on the preview dialog for more information.

5 Start the scan job.

6 Save the scanned image, and then edit it using a photo editing application.

Scanning 61 · 2 Click

Page 62 of the Lexmark 91E user manual — For Macintosh users
Page 62 · click to enlarge
Page 62

Scanning documents for editing

An Optical Character Recognition (OCR) application allows you to edit an original text document that has been scanned. In order for this to work, you must have an OCR application stored on a local or network computer and you must be able to select it from the list of applications when you set up the scan.

When selecting settings for the scan, select to scan to the local computer or network computer where the OCR is installed.

For Windows users

1 Load the original document faceup into the ADF or facedown on the scanner glass.

or Start.

3 Click All Programs or Programs, and then select the printer program folder from the list.

4 Navigate to:

Printer Home > select your printer > Scan > Document

Scanning starts and the scan progress dialog appears.

5 When the scan is finished, save the document.

The file will be converted into a format that can be edited.

6 Open the document in the appropriate application to edit it.

For Macintosh users

1 Load the original document faceup into the ADF or facedown on the scanner glass.

2 From the Applications folder in the Finder, launch the application you want to use.

  • Use any application that supports your printer and lets you work with the OCR software, ABBYY FineReader.
  • If the OCR software is missing, then insert the installation software CD. Reinstall the printer software using the custom install option so you can manually select all of the packages listed.

3 From the list of devices, select your printer.

4 Adjust the scan settings as needed.

If applicable, click on the preview dialog for more information.

5 Set the OCR software as the scan destination, and then start the scan job.

6 If necessary, select the format to which you want to convert the file.

7 Save the file.

Scanning 62 · 2 Click

Page 63 of the Lexmark 91E user manual — For Windows users
Page 63 · click to enlarge
Page 63

Scanning directly to e ‑ mail using the printer software

Make sure you have set up your e‑mail settings before proceeding. For more information, see the section on e‑mailing in the User’s Guide.

For Windows users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

or Start.

3 Click All Programs or Programs, and then select the printer program folder from the list.

4 Navigate to:

Printer Home > select your printer > Scan

5 Select Email photo, Email document, or Email PDF.

Scanning starts and the scan progress dialog appears. When the scan is finished, a new e‑mail message is created with the scanned document automatically attached.

6 Compose your e‑mail message.

For Macintosh users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

2 From the Applications folder in the Finder, launch the application you want to use.

3 From the list of devices, select your printer.

4 Adjust the scan settings as needed.

If applicable, click on the preview dialog for more information.

5 Set the e‑mail application as the scan destination, and then start the scan job.

6 Compose your e‑mail message.

Scanning to a PDF

For Windows users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

or Start.

3 Click All Programs or Programs, and then select the printer program folder from the list.

Scanning 63 · 2 Click · 2 Click

Page 64 of the Lexmark 91E user manual — How do I scan in black and white?
Page 64 · click to enlarge
Page 64

4 Navigate to:

Printer Home > select your printer > Scan > PDF

Scanning starts and the scan progress dialog appears.

5 Save the document as a PDF.

For Macintosh users

1 Load an original document faceup into the ADF or facedown on the scanner glass.

2 From the Applications folder in the Finder, launch the application you want to use.

3 From the list of devices, select your printer.

4 Adjust the scan settings as needed.

If applicable, click on the preview dialog for more information.

5 Set the application that supports the PDF format as the scan destination, and then start the scan job.

6 Save the document as a PDF.

Scanning FAQ

How can I improve the quality of a scan?

  • Make sure your original documents are in good condition.
  • Make sure the application that receives the scanned document is appropriate. For example, if you are scanning a photo to edit it, then make sure you choose a photo editing application to receive the scan. If you are scanning a document to edit the text, then make sure you choose an OCR application.
  • Use a high resolution.

How do I scan in black and white?

1 From the home screen, touch Scan.

2 Choose a scan destination.

3 Select the output file type you want to create.

4 From the Scan Options screen, touch Color > Black/White.

5 Press .

Scanning 64

Page 65 of the Lexmark 91E user manual — Canceling scan jobs
Page 65 · click to enlarge
Page 65

Why am I being asked for a PIN?

PINs are a security measure used to restrict the scanned information from going into certain locations, or to keep what is being scanned from being seen or used by others. You may be prompted to enter a PIN if the network computer you are scanning to requires one.

To learn how PINs get assigned to network computers, see the Help for the printer software associated with your operating system.

Canceling scan jobs

Press on the printer control panel, or click Cancel on the computer screen.

Scanning 65

Page 66 of the Lexmark 91E user manual — If you want to change the SMTP server settings
Page 66 · click to enlarge
Page 66

E-mailing

You can use your printer to send e-mail to one or more recipients without using a computer. To do this, you can either scan a document or photo and then send it as an e-mail, or you can attach a saved document or photo from a memory device to an e-mail.

Before you can send e-mail using the printer control panel, you must first configure the network connection and e-mail settings of your printer.

Setting up the printer to e-mail

Setting up the e ‑ mail function

1 From the home screen, navigate to:

> E‑mail Setup > Yes

2 Enter your e‑mail address, and then touch OK.

The printer compares your e‑mail address to the list of known e‑mail providers.

3 Follow the prompts on the display: • If your e‑mail address matches one of the domains on the list, then the printer automatically assigns the SMTP server settings.

Changing the e ‑ mail settings after setup

If you want to change the SMTP server settings

1 From the home screen, touch > E‑mail Setup > SMTP Setup.

  • 2 Touch each item to enter the necessary information. Touch OK or Accept to save each item.
  • Server —Enter the name or address of the SMTP server.
  • Port —Enter the SMTP port.
  • Use SSL/TLS —Select how the e ‑ mail client and the SMTP server use encryption when sending e ‑ mails.
  • Authentication —Select the authentication type for your e ‑ mail account. If you select None, then you will not be required to enter the User Name and Password. For more information, contact your e-mail provider or your system support person.
  • Note: The Authentication screen may not appear on the display, depending on the e ‑ mail address you entered during e ‑ mail setup.
  • Sender's Name —Enter your name.
  • User Name —Enter your e ‑ mail address.

E-mailing 66

Page 67 of the Lexmark 91E user manual — Creating an e ‑ mail contact list using the printer control panel
Page 67 · click to enlarge
Page 67
  • Password —Enter your e ‑ mail account password.
  • Domain —Enter your e ‑ mail account domain.

3 To check if the SMTP server settings are correct, touch Test SMTP Settings.

If you want to change the e‑mail settings

1 From the home screen, touch > E‑mail Setup.

  • 2 Touch each item, and then enter the necessary information. If necessary, touch OK or Accept to save each item.
  • Return E ‑ mail Address —Enter your e ‑ mail address.
  • Send Me a Copy —Touch Yes to send yourself a copy of every e ‑ mail sent from your printer.
  • Subject Line —Enter your default e ‑ mail subject.
  • Message —Enter your default e ‑ mail message.

Creating an e-mail contact list

Creating an e ‑ mail contact list using the printer control panel

1 From the home screen, navigate to:

2 Add a contact or an e‑mail group: • To add a contact: a Touch Add a Contact > Add Contact Name. b Enter the contact name, and then touch OK > Add E‑mail Address.

c Enter the e‑mail address of the contact, and then touch OK > Accept. d If you want to add another entry, then repeat steps a through c. You can enter up to 89 contacts. • To add an e‑mail group: a Touch Add a Group > Add Group Name. b Enter a group name, and then touch OK.

c Touch Add Group Member, and then select whether you want to add a contact manually or import a contact:

– Address Book—Import a contact from the Address Book. – History—Import a contact from the e‑mail history. – New Entry—Add a new contact. d Touch Accept to save the entry every time you import a contact or add a contact.

E-mailing 67 · > Address Book

Page 68 of the Lexmark 91E user manual — For Macintosh users
Page 68 · click to enlarge
Page 68

Creating an e ‑ mail contact list using the computer

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Navigate to:

Printer Home > select your printer > Fax > Edit contact list > Select from Phone Book

4 From the Phone Book field, choose a phone book.

You can choose any mail client phone book where you store e‑mail addresses.

5 Select the contact that you want to add, and then click Add to or change list to import the contact.

6 Click OK.

For Macintosh users

1 From the Finder, navigate to:

Applications > select your printer folder

2 Double‑click Printer Settings.

3 Navigate to:

Contacts tab > Individuals tab

to open the Address Book.

5 From the Address Book, click and drag the contacts that you want to add to the Contacts list.

For more information, click Help or to view the help information for the fax software.

E-mailing 68 · 1 Click · 4 Click

Page 69 of the Lexmark 91E user manual — Tips for e ‑ mailing
Page 69 · click to enlarge
Page 69

Sending e-mail

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Use the ADF for multiple‑page documents.

Tips for e ‑ mailing

  • Make sure to enter your e ‑ mail account information and set up the SMTP server before sending an e ‑ mail.
  • Make sure the printer is connected to an Ethernet or wireless network before sending an e ‑ mail.

If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person.

  • The printer supports only one active network connection (Ethernet or wireless) at a time.
  • Add contacts to your address book. When sending an e ‑ mail, you can just select contacts from your address book instead of typing their e ‑ mail addresses repeatedly.
  • Use the ADF when scanning two ‑ sided pages if your printer supports duplex scanning and the ADF supports the original document size.
  • Use the scanner glass when scanning two ‑ sided pages if your printer does not support duplex scanning or the ADF does not support the original document size.
  • When using the ADF, adjust the paper guides on the ADF to the width of the original document.
  • To easily retrieve a document after copying or scanning, lift the ADF input tray.
  • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  • When the document to be e-mailed is in place with the settings you want, press to start scanning.

E-mailing 69 · ADF Scanner glass

Page 70 of the Lexmark 91E user manual — Canceling an e ‑ mail
Page 70 · click to enlarge
Page 70

Scanning a document or photo to e-mail

1 Load an original document or photo.

2 Touch Scan > E‑mail.

3 Select the output file type you want to create.

  • 4 Touch an option to enter or select the recipients:
  • Enter E ‑ mail Address —Enter the e ‑ mail address manually.
  • Address Book —Touch Sort by Name or Sort by Group , and then select the contact.
  • History —Select the name or e-mail address from the history list.

If necessary, touch OK or Accept each time you make a selection.

5 To enter additional recipients, touch Add Recipient, and then enter the e‑mail address, name, or group you want to add.

Touch Accept every time you add a recipient.

6 Set the color, quality, original image size, and the other scan options. If necessary, touch Accept to save each setting.

7 If you want to change the default e‑mail subject, then navigate to:

Subject > enter your subject > Accept

8 If you want to change the default e‑mail message, then navigate to:

Message > enter you message > Accept

9 Press .

Canceling an e ‑ mail

To cancel an e‑mail, press .

E-mailing 70

Page 71 of the Lexmark 91E user manual — Setup 1: Printer is connected to a dedicated fax line
Page 71 · click to enlarge
Page 71
Lexmark 91E — Faxing diagram (page 71)
Fig. 55 · Faxing

Setting up the printer to fax

Scenario 1: Standard telephone line

Setup 1: Printer is connected to a dedicated fax line

Lexmark 91E — Setup 1: Printer is connected to a dedicated fax line diagram (page 71)
Fig. 56 · Setup 1: Printer is connected to a dedicated fax lin…
Lexmark 91E — Setup 1: Printer is connected to a dedicated fax line diagram (page 71)
Fig. 57 · Setup 1: Printer is connected to a dedicated fax lin…

To connect:

Connect the cable from the wall jack to the port of the printer.

  • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).
  • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of rings that you want.

Faxing 71

Page 72 of the Lexmark 91E user manual — Setup 2: Printer is sharing the line with an answering machine
Page 72 · click to enlarge
Page 72

Setup 2: Printer is sharing the line with an answering machine

Connected to the same telephone wall jack

Lexmark 91E — Setup 2: Printer is sharing the line with an answering machine diagram (page 72)
Fig. 58 · Setup 2: Printer is sharing the line with an answeri…

To connect:

1 Connect the cable from the wall jack to the port of the printer.

2 Remove the protective plug from the port of the printer, and then connect the answering machine to the port.

Connected to different wall jacks

Lexmark 91E — Setup 2: Printer is sharing the line with an answering machine diagram (page 72)
Fig. 59 · Setup 2: Printer is sharing the line with an answeri…
Lexmark 91E — Setup 2: Printer is sharing the line with an answering machine diagram (page 72)
Fig. 60 · Setup 2: Printer is sharing the line with an answeri…

To connect:

Connect the cable from the wall jack to the port of the printer.

Faxing 72

Page 73 of the Lexmark 91E user manual — Faxing
Page 73 · click to enlarge
Page 73
  • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On).
  • Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
  • If you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.
Setup 3Printer is sharing the line with a telephone subscribed to voice mail service
Lexmark 91E — Faxing diagram (page 73)
Fig. 61 · Faxing

To connect:

1 Connect the cable from the wall jack to the port of the printer.

2 Remove the protective plug from the port of the printer, and then connect the telephone to the port.

Faxing 73

Page 74 of the Lexmark 91E user manual — Scenario 2: Digital Subscriber Line (DSL)
Page 74 · click to enlarge
Page 74
  • This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.
  • If you have only one telephone number on your line, then you need to set the printer to receive faxes manually (Auto Answer Off).

When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the telephone to receive the fax. • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax.

Scenario 2: Digital Subscriber Line (DSL)

Lexmark 91E — Scenario 2: Digital Subscriber Line (DSL) diagram (page 74)
Fig. 62 · Scenario 2: Digital Subscriber Line (DSL)
Lexmark 91E — Scenario 2: Digital Subscriber Line (DSL) diagram (page 74)
Fig. 63 · Scenario 2: Digital Subscriber Line (DSL)

A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.

To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer.

To install a filter for the printer:

1 Connect the line port of the DSL filter to the wall jack.

2 Connect a telephone cable from the port on the back of the printer to the phone port on the DSL filter.

Faxing 74

Page 75 of the Lexmark 91E user manual — Tips for this setup:
Page 75 · click to enlarge
Page 75

3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter.

4 To connect a telephone to the printer, remove the protective plug from the port of the printer and then connect the telephone to the port.

Scenario 3: VoIP telephone service

Lexmark 91E — Scenario 3: VoIP telephone service diagram (page 75)
Fig. 64 · Scenario 3: VoIP telephone service
Lexmark 91E — Scenario 3: VoIP telephone service diagram (page 75)
Fig. 65 · Scenario 3: VoIP telephone service

To connect:

1 Connect one end of a telephone cable to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.

The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP provider if you want to activate the second phone port.

3 Remove the protective plug from the port of the printer, and then connect the telephone to the port.

Tips for this setup:

  • To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.

Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.

Faxing 75

Page 76 of the Lexmark 91E user manual — Setup 1: Printer is connected directly to a cable modem
Page 76 · click to enlarge
Page 76

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

Follow this setup if you normally connect your telephone to a cable modem.

Lexmark 91E — Setup 1: Printer is connected directly to a cable modem diagram (page 76)
Fig. 66 · Setup 1: Printer is connected directly to a cable mo…
Lexmark 91E — Setup 1: Printer is connected directly to a cable modem diagram (page 76)
Fig. 67 · Setup 1: Printer is connected directly to a cable mo…

To connect:

1 Connect one end of a telephone cable to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider if you want to activate the second phone port.

3 Remove the protective plug from the port of the printer, and then connect the telephone to the port.

  • To make sure that the phone port on the cable modem is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.

Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.

Faxing 76

Page 77 of the Lexmark 91E user manual — Scenario 5: Country ‑ or region ‑ specific setup
Page 77 · click to enlarge
Page 77

Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house

Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the wall jacks.

Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 77)
Fig. 68 · Scenario 5: Countryor region-specific setup
Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 77)
Fig. 69 · Scenario 5: Countryor region-specific setup

To connect:

1 Connect the cable from the wall jack to the port of the printer.

2 Remove the protective plug from the port of the printer, and then connect the telephone to the port.

Scenario 5: Country ‑ or region ‑ specific setup

Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.

The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11 connectors. If you have a different type of connector in your country or region, then you may need to use an RJ‑11 adapter.

Faxing 77

Page 78 of the Lexmark 91E user manual — Scenario 5: Countryor region-specific setup
Page 78 · click to enlarge
Page 78

Connecting the printer to a non‑RJ‑11 wall jack

Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 78)
Fig. 70 · Scenario 5: Countryor region-specific setup
Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 78)
Fig. 71 · Scenario 5: Countryor region-specific setup

To connect:

1 Connect one end of a telephone cable to the port of the printer.

2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.

3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ 11 connector, then connect it directly to the wall jack.

  • Do not remove the wrap plug from the port of the printer.
  • The printer may not come with an RJ-11 adapter in your country or region.

Faxing 78

Page 79 of the Lexmark 91E user manual — Connecting the printer in countries or regions that use serial connection
Page 79 · click to enlarge
Page 79

If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove the wrap plug and connect the device to the port of the printer.

Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 79)
Fig. 72 · Scenario 5: Countryor region-specific setup
Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 79)
Fig. 73 · Scenario 5: Countryor region-specific setup

Connecting the printer in countries or regions that use serial connection

In some countries or regions, you need to plug all devices into the wall jack. You cannot plug a telephone or answering machine into the port of the printer. This is called serial connection.

Finland Norway United Kingdom

Show 5 more labels / short text on this page
Faxing 79 · Austria Germany Portugal · Belgium Ireland Spain · Denmark Italy Sweden · France Netherlands Switzerland
Page 80 of the Lexmark 91E user manual — Connecting the printer to a wall jack in Germany
Page 80 · click to enlarge
Page 80
Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 80)
Fig. 74 · Scenario 5: Countryor region-specific setup
Lexmark 91E — Scenario 5: Countryor region-specific setup diagram (page 80)
Fig. 75 · Scenario 5: Countryor region-specific setup

To connect:

Connect the cable from the wall jack to the port of the printer.

Connecting the printer to a wall jack in Germany

The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.

Lexmark 91E — Connecting the printer to a wall jack in Germany diagram (page 80)
Fig. 76 · Connecting the printer to a wall jack in Germany

Faxing 80

Page 81 of the Lexmark 91E user manual — Setting the fax header
Page 81 · click to enlarge
Page 81

Connect the printer to any of the N ports.

Lexmark 91E — Entering your user information diagram (page 81)
Fig. 77 · Entering your user information
Lexmark 91E — Entering your user information diagram (page 81)
Fig. 78 · Entering your user information

To connect:

1 Connect one end of a telephone cable to the port of the printer.

2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to an N port.

3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown.

Entering your user information

Your user information includes your name or your company name, your fax number (which is your telephone number, unless you have a dedicated fax telephone line), and the time and date on your fax machine when a transmission is made. This information appears in the header and footer of the faxes that you send.

In some countries, you cannot send a fax without this information. Some fax machines block faxes without sender information, so make sure that you enter this information in your printer.

Setting the fax header

1 From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Fax Name

2 Enter your name or your company name, and then touch

3 Touch Fax Number.

4 Enter your fax number or your telephone number, and then touch Accept.

Faxing 81

Page 82 of the Lexmark 91E user manual — Configuring fax settings using the printer control panel
Page 82 · click to enlarge
Page 82

Setting the fax footer

1 From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Fax Footer

2 Touch ON > Accept.

Configuring the fax settings

You can configure the fax settings through the printer control panel or the fax software. If you configure the fax settings in the printer control panel, then the fax software imports those settings. The changes appear the next time you launch the fax software. The printer also saves the settings that you choose in the fax software, unless you set the printer to block changes made from the computer.

Configuring fax settings using the printer control panel

1 From the printer control panel, navigate to:

2 Configure the fax settings using the selections in the menu:

From here You can

  • Fax Reports
  • Print activity logs. Activity logs let you view the sent and received fax history of your printer.
  • Print confirmation pages or transmission reports. These reports let you know if the faxes that you send are sent successfully.
  • Ringing and Answering
  • Set the printer to receive faxes automatically or manually. Turn Auto Answer to On or Off.
  • Adjust the ringing volume.
  • Set the number of rings. This is important if you choose to receive faxes automatically (Auto Answer On).
  • Set the distinctive ring. If you subscribe to the distinctive ring feature on your telephone line, then set the correct pattern for the printer in this menu.
  • Enable fax forwarding.
  • Set a manual answer code. This is the code you press to receive faxes manually.
  • Set the Caller ID pattern that you want. Some countries or regions have multiple patterns.
  • Set the printer to fit incoming faxes into a page when printing.
  • Set the fax footer.

2‑Sided Faxes • Set the printer to print incoming faxes on both sides of the paper.

Faxing 82 · > Fax Setup

Page 83 of the Lexmark 91E user manual — Using the Printer Settings in Macintosh
Page 83 · click to enlarge
Page 83

From here You can

  • Dialing and Sending
  • Set your fax name and fax number.
  • Adjust the dialing volume.
  • Set the dial method, redial time, number of redial attempts, dialing prefix, and fax sending speed.
  • Convert sent faxes into modes that receiving fax machines recognize. Otherwise, such faxes are aborted.
  • Enable error correction during transmission.

Fax Blocking Block unwanted incoming faxes.

Configuring fax settings using the fax software

Before you begin, make sure that:

  • The printer is properly connected to the telephone line.
  • The printer is turned on and connected to the computer.
  • The printer is not in Sleep mode. If the printer is in Sleep mode, then press to wake up the printer.

Using the Fax Setup Wizard in Windows

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Click Printer Home > Fax > Set up the printer to fax.

The Fax Setup Wizard opens.

4 Run the Fax Setup Wizard. Make sure you select the correct telephone service and connection. The wizard configures optimal fax settings based on your connection.

Using the Printer Settings in Macintosh

1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2 Double-click Printer Settings.

3 Configure the fax settings using the printer software.

To view the help information for the fax software, click Help or .

Faxing 83 · 1 Click

Page 84 of the Lexmark 91E user manual — For Windows users
Page 84 · click to enlarge
Page 84

Creating a contact list

You can create a contact list using the Address Book in the printer control panel or the phone book in the fax software. If you create a contact list in the printer control panel, then the fax software automatically saves those contacts as Phonebook entries. Likewise, when you add contacts to the fax software, the printer automatically saves them to the printer Address Book.

You can save up to 89 contacts and 10 fax groups in the contact list.

Creating a contact list using the printer control panel

1 From the home screen, navigate to:

2 To add a contacta Navigate to:

Add a Contact > Add Contact Name b Enter the contact name, and then touch

. c Touch Add Fax Number. d Enter the fax number of the contact, and then touch Accept. e Touch Accept again.

f If you want to add another entry, then repeat steps a through e.

3 To add a fax group: a Navigate to:

Add a Group > Add Group Name b Enter a group name, and then touch

. c Touch Add Group Member, and then select whether you want to add a contact manually or import a contact:

  • Address Book —Import a contact from the Address Book.
  • New Entry —Add a new contact. d Touch Accept to save the entry every time you import a contact or add a contact.

Creating a contact list using the fax software

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Click Printer Home > Fax > Edit contact list.

The Contacts tab of the Printer Setup Utility opens.

4 Click Select from phonebook.

5 From the Phonebook field, choose a phone book.

Faxing 84 · > Address Book · 1 Click

Page 85 of the Lexmark 91E user manual — Sending faxes
Page 85 · click to enlarge
Page 85

6 Select the contact that you want to add, and then click Add to or change list to import the contact.

7 Click OK.

For Macintosh users

1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2 Double-click Printer Settings.

  • 3 Click the Contacts tab.
  • To add contacts, click the Individuals tab.
  • To add fax groups, click the Groups tab.

to open the Address Book.

5 From the Address Book, click and drag the contacts that you want to add to the Contacts list.

For more information on the fax software, click Help or .

Sending faxes

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Use the ADF for multiple‑page documents.

Faxing 85 · 4 Click · ADF Scanner glass

Page 86 of the Lexmark 91E user manual — For Windows users
Page 86 · click to enlarge
Page 86

Tips for sending faxes

  • Make sure the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if you hear a dial tone.
  • Make sure the paper exit tray is fully extended and the tray extension is flipped out.
  • Depending on your printer model, use the ADF when scanning two ‑ sided (duplex) pages.
  • To easily retrieve a document after copying or scanning, lift the ADF input tray.
  • When using the ADF, adjust the paper guide on the ADF to the width of the original document.
  • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  • When the document to be faxed is in place with the settings you want, press to send the fax.

Sending faxes using the printer control panel

1 Load an original document.

2 Touch Fax.

3 Send the fax:

To send a fax to a single recipient:

a Enter a fax number, or touch Address Book or History to import a contact.

b Touch .

To send a fax to multiple recipients (broadcast fax):

a Touch Fax to Multiple, and then touch Add a Number. b Enter a fax number, or touch Address Book or History to import a contact. Repeat this step until you have

entered the numbers of all the recipients. Touch Accept every time you add a recipient. c Touch .

Tips:

  • You can broadcast a fax to up to 30 recipients.
  • Touch More Options to set a color or black ‑ and ‑ white fax, adjust the quality of the fax, set the size of the document, add a cover page, schedule the fax, or view pending faxes.

Sending faxes using the computer

For Windows users

1 With a document open, click File > Print.

2 Make sure the appropriate printer is selected, and then click Properties, Preferences, Options, or Setup.

3 Click the Fax tab, and then make sure Enable Fax is selected.

Faxing 86

Page 87 of the Lexmark 91E user manual — Receiving faxes automatically
Page 87 · click to enlarge
Page 87

4 Enter the recipient fax number or numbers in the “Fax number(s)” field.

You can enter fax numbers manually or by using the Phone Book feature.

5 If necessary, enter a prefix in the Dialing Prefix dialog.

6 Select the appropriate paper size and page orientation.

7 Select Include Cover Page with Fax, and enter the appropriate information if you want to include a cover page with the fax.

8 Click OK.

For Macintosh users

1 With a document open, choose File > Print.

2 From the Printer pop‑up menu, select the fax version of your printer.

3 Enter the name and number of the recipient.

4 Click Fax.

Receiving faxes

Tips for receiving faxes

When receiving faxes:

  • Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if you hear a dial tone.
  • If you set the printer to receive faxes manually (Auto Answer Off), then make sure that the ringer volume is not set to Off.
  • If you have set the printer to receive faxes automatically (Auto Answer On), then load paper in the printer.

Receiving faxes automatically

1 Make sure that Auto Answer is on:

From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Auto Answer > On > Accept

2 Set the number of rings before the printer picks up incoming faxes: a Touch Pick up on the. b Set the number of rings, and then touch Accept.

When the number of rings you set is detected, the printer automatically receives the incoming fax.

Faxing 87

Page 88 of the Lexmark 91E user manual — For Windows users
Page 88 · click to enlarge
Page 88

Tips:

  • If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call. If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings.
  • If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.

Receiving faxes manually

1 Make sure that Auto Answer is off: a From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Auto Answer b If Auto Answer is not set to Off, touch Off, and then touch Accept.

2 When the telephone rings and you hear fax tones when you pick up the handset, press on the printer or *9* on the telephone attached to the printer.

Faxing FAQ

If I skipped the fax setup initially, do I need to run the installer again to set up the fax?

You do not need to run the installer again. You can set up and configure the fax through the fax software that was installed with the printer software.

1 Connect the printer to the telephone line. For more information, see “Setting up the printer to fax” on page 71.

2 Configure the fax settings using the fax software. To access the fax software:

For Windows users

or Start. b Click All Programs or Programs, and then select the printer program folder from the list.

c Click Printer Home > Fax >Set up the printer to fax. The Fax Setup Wizard opens. d Run the wizard. Make sure you select the correct telephone service and connection. The wizard configures

optimal fax settings based on your connection.

Faxing 88 · a Click

Page 89 of the Lexmark 91E user manual — When do I need to set Auto Answer to On?
Page 89 · click to enlarge
Page 89

For Macintosh users

a From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. b Double-click Printer Settings, and then configure the fax settings.

What is a splitter and what type of splitter should I use?

If there are limited wall jacks in your home or limited ports on your adapter, then you can use a phone splitter. A splitter splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more ports where you can plug the devices. Do not use a line splitter.

To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.

What is my fax number?

In most cases, your telephone number is also your fax number. If you subscribe to the Distinctive Ring Pattern Detection (DRPD) service offered by telephone companies, then your fax number is the number that you assigned to the printer. Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in the Fax Setup menu of the printer control panel.

If you have more than one telephone line, then make sure that you enter the number for the line on which the printer is connected.

What is my dialing prefix?

The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or telephone number. If the printer is in an office setting or in a private branch exchange, then this can be a specific number that you need to press so you can make a call outside the office. This can also be a country code or an area code that you need to enter if you are sending faxes outside of town. This can be very useful if you frequently send faxes to the same country or area. When you set the dialing prefix in the utility, the printer automatically inputs the prefix when you dial the fax number or telephone number.

You can enter up to 8 characters as your dialing prefix. The valid characters are the numbers 0–9, the letters P and W (uppercase and lowercase), and the characters pound (#) and star (*). If you are using the fax software to enter the dial prefix, then you may also include the characters minus and comma.

  • Some of these characters may not be available, depending on the printer you purchased.
  • Characters may vary depending on whether you are using the printer control panel or the computer keyboard.

When do I need to set Auto Answer to On?

Auto Answer is set to On by default, which lets the printer receive faxes automatically.

If the printer is connected to the same telephone line with an answering machine, then you must set Auto Answer to On so that you can receive both your voice calls and your faxes. Make sure that the answering machine is set to pick up on fewer rings than the rings set in the printer. This lets the other devices pick up the voice calls first. If an incoming call is a fax, the printer can detect fax signals on the line and takes the call.

Faxing 89

Page 90 of the Lexmark 91E user manual — Make sure the printer is connected properly to the telephone line
Page 90 · click to enlarge
Page 90

How many rings should I set?

If the printer is sharing a line with an answering machine, then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.

If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings that you want.

How do I set the distinctive ring for the printer?

Setting the correct ring is important if you subscribe to the Distinctive Ring Pattern Detection (DRPD) feature offered by telephone companies. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let you know what telephone number was dialed, and what device you should use to answer the call.

Assign one of your telephone numbers to the printer as the fax number, and then set the printer to answer the ring pattern of that number. If the pattern is set incorrectly, then the printer rings, but it never receives the fax.

Distinctive Ring is also called Ident-a-Call, Smart Ring, Teen Ring, RingMaster, or IdentaRing.

1 From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Ring Pattern

2 Touch the correct ring pattern for the printer, and then touch Accept.

How can I check the dial tone?

A dial tone lets you know if the telephone line is working or if the printer is properly connected to the telephone line. If you encounter problems sending and receiving faxes, then make sure you can hear a dial tone on the line and through the printer.

Make sure the telephone line and the wall jack are working

1 Plug an analog telephone into the wall jack.

2 Listen for a dial tone through the telephone handset.

If you hear a dial tone, then the telephone line and the wall jack are working.

If you do not hear a dial tone, plug the analog telephone into a second wall jack, and then listen for a dial tone. If you hear a dial tone, then the telephone line is working but the first wall jack is not working.

Make sure the printer is connected properly to the telephone line

1 While the printer is connected to a telephone line through the port on the back of the printer, plug an analog telephone into the port of the printer.

2 Listen for a dial tone.

If you hear a dial tone, then the telephone line is working and properly connected to the printer.

If you do not hear a dial tone through both the wall jack and the printer, then see the “Fax troubleshooting checklist” on page 158.

Faxing 90

Page 91 of the Lexmark 91E user manual — How do I change the resolution of the documents that I fax?
Page 91 · click to enlarge
Page 91

How do I adjust the speaker volume on the printer?

Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected properly to your telephone network. If you set the printer to receive faxes manually, then make sure that you set the ringer volume loud enough for you to hear it.

Adjusting the dialing volume

1 From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Speaker Volume

2 Select a dial volume setting, and then touch Accept.

Adjusting the ringer volume

1 From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Ringer Volume

2 Select a ringer volume setting, and then touch Accept.

How can I make sure that fax calls go to the printer and voice calls go to the answering machine?

To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.

What settings work best with voice mail service?

Voice mail and fax can share the same telephone line if you subscribe to a distinctive ring service offered by your telephone company. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let you know which telephone number was dialed, and which device you should use to answer the call.

If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to turn off voice mail whenever you are expecting a fax.

How do I change the resolution of the documents that I fax?

The resolution, or fax quality, of the documents that you send may affect fax transmission. The receiving fax machine may not support high resolutions, resulting to a failed fax. You can fix this by enabling Auto Fax Convert. Make sure the original documents are not blurred.

If your high-resolution fax is not being received, then try selecting a lower quality.

Quality Black resolution Color resolution

Standard 200 x 100 200 x 200

Fine 200 x 200 200 x 200

Faxing 91

Page 92 of the Lexmark 91E user manual — How do I know that the fax was sent successfully?
Page 92 · click to enlarge
Page 92

Quality Black resolution Color resolution

Superfine 300 x 300 200 x 200

Ultrafine 300 x 300 (half‑toned) 200 x 200

1 From the home screen, navigate to:

Fax > More Options > Quality

2 Select a resolution, and then touch Accept.

How do I send a fax at a scheduled time?

1 From the home screen, touch Fax.

2 Enter a fax number, or touch Address Book to import a contact.

3 Navigate to:

More Options > Schedule a Fax

4 Enter the time you want to send the fax, and then touch Accept.

5 Touch to save the scheduled fax.

The printer sends the fax at the designated time. Do not turn off the printer or unplug it from the telephone line before the scheduled time.

How do I send a fax using a phone calling card?

1 From the home screen, navigate to:

Fax > More Options > Dial tone

You should hear the dial tone of the telephone line.

2 Enter the calling card information, and then when you are connected to the telephone carrier, follow the prompts.

3 When prompted, enter the fax number of the recipient, and then touch .

How do I know that the fax was sent successfully?

You can set the printer to print a confirmation page, or transmission report, every time you send a fax. This report includes the date and time that the fax was sent. If the fax job is unsuccessful, then the report also includes the cause of the error.

1 From the home screen, navigate to:

> Fax Setup > Fax Reports > Transmission Log Printing

  • 2 Select a report printing option:
  • If you want to print a report every time you send a fax, then touch For All .
  • If you want to save on ink and print a report only when a fax job is unsuccessful, then touch On Error .

3 Touch Accept.

Faxing 92

Page 93 of the Lexmark 91E user manual — Blocking faxes from specific numbers
Page 93 · click to enlarge
Page 93

How do I view the fax history of the printer?

You can view the fax history of the printer on the display. You can also print reports of sent or received faxes, or both.

From the printer control panel, navigate to:

> Fax Setup > Fax Reports > History on Screen

How do I print a fax on both sides of the paper?

1 From the home screen, navigate to:

> Fax Setup > 2‑Sided Faxes

  • 2 Select a duplex setting:
  • Never —Incoming faxes are never printed on both sides of the paper.
  • Always —Incoming faxes are always printed on both sides of the paper.

3 Touch Accept.

How do I forward a fax?

When you enable this option, all the faxes that you receive are automatically forwarded until you disable it.

1 From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Fax Forward

2 Select Forward or Print & Forward, and then touch Accept.

3 Enter the number to which you want to forward the fax, and then touch Accept.

To disable fax forwarding, return to the Fax Forward menu, and then select Off.

How do I block faxes?

You can block faxes from specific numbers. You can also block junk faxes and faxes from unidentified senders (senders without a Caller ID). This feature is helpful if you want to receive faxes automatically but want to filter the faxes that you receive.

Blocking faxes from specific numbers

1 From the home screen, navigate to:

> Fax Setup > Fax Blocking > Turn On/Off > On > Accept

2 Add a number to block. a Navigate to:

Block Faxes From > Add a Number to Block > Add a Name b Enter the contact name, and then touch

. c Touch Add a Fax Number. d Enter the fax number of the contact, and then touch Accept. e Touch Accept again.

You can block up to 50 numbers.

Faxing 93

Page 94 of the Lexmark 91E user manual — Can I retrieve failed faxes?
Page 94 · click to enlarge
Page 94

Blocking faxes from unidentified senders

From the home screen, navigate to:

> Fax Setup > Fax Blocking > Block No ID > On > Accept

Can I retrieve failed faxes?

The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper, then you can print the fax later after the error is resolved.

However, you cannot retrieve a failed fax if the failure is due to power loss. In this case, the printer automatically prints an error report the next time it is turned on. For incoming faxes, the error report lets you know who sent the fax and how many pages were not printed. For outgoing faxes, it lets you know how many pages were not sent.

Faxing 94

Page 95 of the Lexmark 91E user manual — WEP
Page 95 · click to enlarge
Page 95

Networking

Installing the printer on a wireless network

Wireless network compatibility

Your printer may contain an IEEE 802.11b, IEEE 802.11g, or IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers that are Wi-Fi certified.

Supported network security options

The printer supports three wireless security options: WPA2/WPA, WEP, and no security.

WPA2/WPA

WPA (Wi-Fi Protected Access) and WPA2 (Wi-Fi Protected Access 2) offer stronger wireless network security than WEP. WPA2 and WPA are similar types of security. WPA2 uses a more complex encryption method and is more secure than WPA. Both WPA2 and WPA use a series of characters, called the WPA pre‑shared key or passphrase, to protect wireless networks from unauthorized access.

WPA2/WPA passphrases must be:

  • Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

or • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a keyboard. ASCII characters in a WPA passphrase are case-sensitive.

Every device on the wireless network must use the same WPA passphrase. WPA security is an option only on infrastructure networks with access points (wireless routers) and network cards that support WPA. Most newer wireless network equipment also offer WPA2 security as an option.

WEP

WEP (Wired Equivalent Privacy) is the most basic and the weakest type of wireless security. WEP security relies on a series of characters called the WEP key.

Every device on the wireless network must use the same WEP key. WEP security can be used on both ad hoc and infrastructure networks.

Networking 95

Page 96 of the Lexmark 91E user manual — Information you will need during wireless setup
Page 96 · click to enlarge
Page 96

A valid WEP key has:

  • Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a keyboard.

No Security

It is not recommended to use no security at all on a home wireless network. Using no security means that anyone within range of your wireless network can use your network resources—including Internet access— if your wireless network is connected to the Internet. The range of your wireless network may extend far beyond the walls of your home, allowing access to your network from the street or from your neighbors’ homes.

Printing a network setup page

A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the printer.

1 Load plain paper.

2 From the home screen, navigate to:

> Network Setup > Print Setup Page

Information you will need during wireless setup

To set up the printer for wireless printing, you need to know the following:

  • The name of your wireless network, which is also known as the SSID (Service Set Identifier)
  • If encryption was used to secure your network
  • The security key (either a WEP key or WPA/WPA2 preshared key/passphrase)

To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came with the access point (wireless router), see the Web page associated with the access point, or consult your system support person.

If your access point is using WEP security, then the WEP key should be:

  • Exactly 10 or 26 hexadecimal characters

or • Exactly 5 or 13 ASCII characters

If your access point is using WPA or WPA2 security, then the WPA/WPA2 preshared key/passphrase should be:

  • Exactly 64 hexadecimal characters

or • From 8 to 63 ASCII characters

  • Hexadecimal characters are A–F, a–f, and 0–9.
  • ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA/WPA2 preshared key/passphrase are case ‑ sensitive.

Networking 96

Page 97 of the Lexmark 91E user manual — Authentication
Page 97 · click to enlarge
Page 97

If your wireless network is not using security, then you will not have a security key.

Note: If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter and look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.

Information you will need during advanced wireless setup

The Wireless Setup Utility does not detect the wireless network SSID for you during advanced wireless setup. You must know the following information before configuring the wireless printer settings manually:

Wireless Mode

Check your wireless network type:

Infrastructure—All devices on a wireless network communicate with each other through an access point (wireless router). Ad Hoc—Network devices communicate directly with each other without the use of centralized security or access point. Ad hoc mode may be available only in select printer models or operating systems.

Network Name (SSID)

This is the identifying name that distinguishes a network from other networks in the area.

Channel

Auto is selected by default and cannot be changed if the network is configured in infrastructure mode.

  • If the network is set up in ad hoc mode, then select the channel that other devices in the network are using. All devices in an ad hoc network must use the same channel to communicate with each other.
  • The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc wireless network will keep it from working on any other wireless network, either ad hoc or infrastructure.

Authentication

Determine if you have an infrastructure or ad hoc setup, and then check the corresponding authentication type.

Wireless mode Authentication type

  • Infrastructure
  • Open Mode
  • Shared Mode
  • WPA Personal
  • WPA2 ‑ Personal
  • WPA2 ‑ Enterprise
  • 802.1X ‑ RADIUS

Ad hoc Open Mode

Networking 97

Page 98 of the Lexmark 91E user manual — For Macintosh users
Page 98 · click to enlarge
Page 98

Encryption

Check the encryption method used on your network.

Authentication type Encryption method

  • Open Mode
  • None
  • WEP
  • WPA2 ‑ Personal
  • TKIP
  • AES
  • WPA2 ‑ Enterprise
  • TKIP
  • AES
  • 802.1X ‑ RADIUS
  • None
  • WEP ‑ DynamicKeys
  • WEP ‑ StaticKeys
  • WPA ‑ TKIP
  • WPA ‑ AES

Installing the printer on a wireless network

Before you install the printer on a wireless network, make sure that:

  • Your wireless network is set up and working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

For Windows users

1 Close all open software programs.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

c Press Enter, or click OK.

3 Follow the instructions on the computer screen.

For Macintosh users

1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

Show 4 more labels / short text on this page
Networking 98 · Shared Mode WEP · WPA Personal TKIP · a Click
Page 99 of the Lexmark 91E user manual — For Macintosh users
Page 99 · click to enlarge
Page 99

3 Double-click the software installer package, and then follow the instructions on the computer screen.

Installing the printer on other computers

Once the printer is set up on the wireless network, it can be accessed wirelessly by any other computer on the network. However, you will need to install the printer driver on every computer that will access it. You do not need to configure the printer again, although you will need to run the setup software on each computer to install the driver.

For Windows users

1 Close all open software programs.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

c Press Enter, or click OK.

3 Follow the instructions on the computer screen for installing a configured printer on a new computer.

For Macintosh users

1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double-click the software installer package.

4 Select My printer is already set up. I am installing it on a new computer.

5 Click Continue, and then follow the instructions on the computer screen for installing a configured printer on a new computer.

Networking 99 · a Click

Page 100 of the Lexmark 91E user manual — Determining the printer status using the network indicators
Page 100 · click to enlarge
Page 100

Determining the printer status using the network indicators

Lexmark 91E — Determining the printer status using the network indicators diagram (page 100)
Fig. 79 · Determining the printer status using the network ind…

– Some features may be available only in select models. – To find out if your printer has Ethernet or wireless capability, or both, refer to the documentation that came

with your printer or contact your system support person. • For touch‑screen printers, the network (Ethernet and Wi‑Fi) indicators can be viewed only from the home screen. If the home screen does not appear, then do either of the following:

– If necessary, turn on the printer. Make sure it is not in Sleep mode.

– From the printer control panel, press . • For non‑touch‑screen printers, check the network indicator light.

Lexmark 91E — Determining the printer status using the network indicators diagram (page 100)
Fig. 80 · Determining the printer status using the network ind…

The printer is connected through an Ethernet connection, and is ready for use.

The printer has been configured for Ethernet connection, but it cannot reach the network.

Networking 100

Page 101 of the Lexmark 91E user manual — Adding the printer to your wireless network
Page 101 · click to enlarge
Page 101
  • The printer has not been configured for a wireless network and therefore cannot connect to a wireless network.
  • The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hoc device.

Wi‑Fi indicator light is off

  • The printer is out of the range of the access point (wireless router).
  • The printer is trying to communicate with the access point, but the access point is turned off or is not working properly.
  • The access point has been turned off and turned back on, and the printer is trying to establish connection with the network.
  • The wireless settings of the printer may no longer be valid.

!

Wi‑Fi indicator light is blinking green

Check if the SSID, WEP key or WPA/WPA2 passphrase, security type, and IP address that the printer uses are still correct.

  • The printer is connected to a wireless network and is ready for use.
  • The printer is connected to your computer through an ad hoc connection.

Wi‑Fi indicator light is solid green

Special wireless installation instructions

The following instructions apply to customers outside of North America who are using a wireless broadband box. Some examples of these boxes include LiveBox, AliceBox, N9UF Box, Freebox, and Club Internet.

Before you begin

  • Make sure your box is wireless ‑ enabled and activated to work on a wireless network. For more information about configuring the box to work wirelessly, see the documentation that came with your box.
  • Make sure your box is turned on and that your computer is on and connected to your wireless network.

Adding the printer to your wireless network

1 Set up your printer for wireless networking using the setup instructions provided.

Stop when you are prompted to select a network.

2 If there is an association/registration button on the back of your box, then press it before selecting a network.

3 Return to the computer screen.

From the wireless networks list that appears, select your network, and then click Continue.

If your wireless network does not appear in the list, then:

a Connect to another wireless network.

Click Unlisted Network.

Show 6 more labels / short text on this page
Networking 101 · Indicator Printer status · or · or · or · For Windows users
Page 102 of the Lexmark 91E user manual — For Macintosh users
Page 102 · click to enlarge
Page 102

Select Other Wireless Network from the list, and then click Continue. b Enter the details about your wireless network.

4 Follow the instructions on the computer screen to complete the installation.

Assigning a static IP address

The printer is automatically assigned an IP address through DHCP on most networks.

1 Complete the wireless or Ethernet setup, allowing the printer to receive a DHCP address from a DHCP server on the network.

2 Print a network setup page to see the IP address currently assigned to the printer.

3 Open a Web browser, and then type the printer IP address in the address field. Press Enter.

4 Click Configuration > TCP/IP > Set static IP address.

5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.

To verify, type the static IP address in the Web browser address field, and then press Enter.

For more information, contact your system support person.

Changing wireless settings after installation

To change the wireless settings on the printer, such as the configured network and the security key, do the following:

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Select your printer, and then navigate to:

Printer Home > Settings > Wireless setup utility

4 Follow the instructions on the computer screen.

For Macintosh users

1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2 Double‑click Wireless Setup Assistant.

3 Follow the instructions on the computer screen.

Networking 102 · For Macintosh users · 1 Click

Page 103 of the Lexmark 91E user manual — For Macintosh users
Page 103 · click to enlarge
Page 103

Advanced wireless setup

Adding a printer to an existing ad hoc wireless network

Before you begin, make sure:

  • Your wireless network adapter is properly attached to your computer and is working.
  • The ad hoc wireless network that the printer will connect to is available. For more information on creating an ad hoc wireless network, see the documentation that came with your operating system.
  • The recommended way to set up your wireless network is to use an access point. This network setup is called infrastructure network.
  • If your computer has My WiFi or Wi-Fi Direct, then you can create direct connections to your wireless printer. For more information, see the documentation that came with your computer.
  • The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc wireless network will remove it from any other wireless network, either ad hoc or infrastructure, for which it is configured.

For Windows users

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Select your printer, and then navigate to:

Printer Home > Settings > Wireless setup utility

4 Follow the instructions on the computer screen.

For Macintosh users

1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2 Double‑click Wireless Setup Assistant.

3 Follow the instructions on the computer screen.

Networking 103 · 1 Click

Page 104 of the Lexmark 91E user manual — PEAP
Page 104 · click to enlarge
Page 104

Configuring Wi ‑ Fi Protected Setup manually

If your printer or device has not yet been configured for wireless connection and you want to configure it using WPS, then push the WPS button on the wireless router. Wait for the printer control panel to display a message to begin WPS configuration. There might be a short delay before the message appears. If nothing happens after 30 seconds, then do one of the following:

U SE THE P USH B UTTON C ONFIGURATION (PBC) METHOD

1 From the printer control panel, navigate to:

> Network Setup > Wireless Networking > Wi‑Fi Protected Setup > Push Button Method

2 Follow the instructions on the printer display.

U SE THE P ERSONAL I DENTIFICATION N UMBER (PIN) METHOD

1 From the printer control panel, navigate to:

> Network Setup > Wireless Networking > Wi‑Fi Protected Setup > PIN Method

2 Follow the instructions on the printer display.

Configuring security

Simple wireless networks require WEP keys or a WPA/WPA2 preshared key/passphrase, or may not have any security at all. More‑advanced wireless network security can require one or more certificates and an authentication server. If the network requires a certificate and you do not have it, then fill out the certificate request form provided within the Wireless Setup Utility and follow the procedure of your organization in requesting a certificate for network access.

The following is a list of supported types of wireless network security and their requirements:

WEP

  • WEP key (up to four keys may be required)
  • Default WEP Transmit Key (if more than one WEP key is configured, this specifies which one to use)

WPA Personal, WPA2‑Personal or WPA2‑Enterprise

  • Preshared key
  • Encryption (AES or TKIP)

EAP‑MD5, MSCHAPv2, or LEAP

  • RADIUS user name
  • RADIUS password

PEAP

  • RADIUS user name
  • RADIUS password
  • CA certificate

Networking 104

Page 105 of the Lexmark 91E user manual — Installing the printer on an Ethernet network
Page 105 · click to enlarge
Page 105

EAP ‑ TLS

  • RADIUS user name
  • CA certificate
  • Signed certificate

EAP ‑ TTLS

  • Appropriate inner authentication
  • RADIUS user name
  • RADIUS password
  • CA certificate

Configuring 802.1X Authentication

The information to complete is dependent on the 802.1X security mechanism you select. Some require user names, passwords, and/or certificates. If your network contains multiple access points with different modes of authentication, then you can select and configure more than one authentication mechanism.

1 From the Configure 802.1X Authentication dialog, select an authentication mechanism.

If you have selected Do this

EAP‑MD5, LEAP, or MSCHAPv2

Proceed to the next step.

PEAP or EAP‑TTLS Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to locate the certificate file.

EAP‑TLS a Click Install Signed Certificate, and then type the path to the signed certificate, or click Browse to locate the certificate file. b Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to locate the certificate file.

2 Type the necessary information that the authentication server requires.

3 Click OK, and then follow the instructions on the computer screen.

Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network

Make sure you have the following information before you begin:

  • A valid, unique IP address for the printer to use
  • The gateway for the network
  • The network mask of the network where the printer will be used
  • The name of the domain where the printer will reside

Networking 105

Page 106 of the Lexmark 91E user manual — Switching between USB, Ethernet, and wireless connections (Windows only)
Page 106 · click to enlarge
Page 106
  • The hostname of the printer
  • Any security information required for authentication to the network

Installing the printer on an Ethernet network

Before you install the printer on an Ethernet network, make sure that:

  • You have completed the initial setup of the printer.
  • Your network is set up and working properly.
  • Your computer is connected to your network.

For Windows users

1 Close all open software programs.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

c Press Enter, or click OK.

3 Follow the instructions on the computer screen.

For Macintosh users

1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double-click the software installer package.

4 Follow the instructions on the computer screen.

Performing network management tasks

Switching between USB, Ethernet, and wireless connections (Windows only)

You can change the way you access your printer, depending on your needs. The following procedures assume that you have configured your printer for one type of connection and that the printer drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.

Networking 106 · a Click

Page 107 of the Lexmark 91E user manual — Using the printer locally (USB)
Page 107 · click to enlarge
Page 107

Using the printer wirelessly

Select the connection type that describes how you currently access your printer:

If the printer is currently set up locally (using USB connection)

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Select your printer, and then navigate to:

Printer Home > Settings > Wireless setup utility

4 Follow the instructions on the computer screen.

If the printer is currently set up for Ethernet

1 Unplug the Ethernet cable from the printer.

2 Place the printer close to the computer you want to use to configure the printer for wireless access.

or Start.

4 Click All Programs or Programs, and then select the printer program folder from the list.

5 Select your printer, and then navigate to:

Printer Home > Settings > Wireless setup utility

6 Follow the instructions on the computer screen.

Using the printer locally (USB)

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for Ethernet

1 Attach a USB cable to the computer and to the printer.

2 Wait a moment for Windows to locate the driver and finish setting up the printer.

3 Select the USB printer. See “Selecting a printer” on page 108.

If the printer is currently set up for wireless

1 Attach a USB cable to the computer and to the printer.

2 Wait a moment for Windows to locate the driver and finish setting up the printer.

3 Select the USB printer. See “Selecting a printer” on page 108.

Networking 107 · 1 Click · 3 Click

Page 108 of the Lexmark 91E user manual — Using the printer wirelessly
Page 108 · click to enlarge
Page 108

Using the printer over an Ethernet network

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for wireless

1 Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.

2 Wait one minute for the Ethernet network adapter to become active and acquire an IP address from the network.

3 Select the Network printer. See “Selecting a printer” on page 108.

If the printer is currently set up locally (using USB connection)

1 Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.

2 Insert the Software and Documentation CD into the computer you want to use to configure the printer.

3 Follow the instructions on the computer screen for configuring a printer on an Ethernet network.

4 Select the Network printer. See “Selecting a printer” on page 108.

Selecting a printer

1 Open the printers folder.

or Start. b In the Start Search or Run box, type control printers.

c Press Enter, or click OK.

2 Right‑click the printer you want to use (Network or USB).

3 Select Set as Default Printer from the menu.

4 Close the “Printers” or “Printers and Faxes” window.

Switching between USB, Ethernet, and wireless connections (Macintosh only)

You can change the way you access your printer depending on your needs. The following procedures assume that you have configured your printer for one type of connection and that the drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.

Using the printer wirelessly

Select the connection type that describes how you currently access your printer:

Networking 108 · a Click

Page 109 of the Lexmark 91E user manual — Using the printer locally (USB)
Page 109 · click to enlarge
Page 109

If the printer is currently set up locally (using USB connection)

1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double‑click Lexmark Extras > Lexmark Setup Assistant.

4 Follow the instructions on the computer screen.

If the printer is currently set up for Ethernet

1 Unplug the Ethernet cable from the printer.

2 Place the printer close to the computer you want to use to configure the printer for wireless access.

3 Close all open applications.

4 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

5 Double‑click Lexmark Extras > Lexmark Setup Assistant.

6 Follow the instructions on the computer screen.

7 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.

Using the printer locally (USB)

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for Ethernet

1 Firmly plug the square end of the USB cable into the back of the printer.

2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

3 Add the printer. See “Adding the printer” on page 110.

4 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.

If the printer is currently set up for wireless

1 Attach a USB cable to the computer and to the printer.

2 Add the printer. See “Adding the printer” on page 110.

3 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless connection.

Networking 109

Page 110 of the Lexmark 91E user manual — Sharing a printer in a Windows environment
Page 110 · click to enlarge
Page 110

Using the printer over an Ethernet network

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for wireless

1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.

2 Wait a minute for the Ethernet network adapter to become active and acquire an IP address from the network.

3 Add the printer. See “Adding the printer” on page 110.

4 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless network.

If the printer is currently set up locally (using USB connection)

1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.

2 Insert the installation software CD into the computer you want to use to configure the printer.

3 Follow the instructions on the computer screen.

Adding the printer

In Mac OS X version 10.5 or later

1 From the Apple menu, navigate to:

System Preferences > Print & Fax

2 Click +.

3 Click the Default or Default Browser tab, and then select your printer.

4 Click Add.

In Mac OS X version 10.4 or earlier

1 From the Finder, choose Utilities.

2 Double‑click Printer Setup Utility or Print Center.

3 From the Printer List dialog, choose the printer you want to use, and then click Add.

4 From the Printer Browser, select your printer, and then click Add.

Sharing a printer in a Windows environment

1 Prepare the computers to share the printer: a Make all computers printing to the printer accessible through Network Neighborhood by enabling File and Print

Sharing. See the Windows documentation for instructions on enabling File and Print Sharing. b Install the printer software on all computers that will print to the printer.

Networking 110

Page 111 of the Lexmark 91E user manual — Sharing a printer in a Macintosh environment
Page 111 · click to enlarge
Page 111
2 Identify the printera On the computer that is attached to the printer, open the printers folder:

, or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. b Right‑click the name of your printer.

c Click Sharing or Printer Properties. d From the Sharing tab, select Share this printer or Shared as. e Assign a distinctive name, and then click OK.

3 Locate the printer from the remote computer:

, or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. b Right‑click the name of your printer.

c Click Properties or Printer properties. d Click Ports > Add Port > Local Port > New Port. e Type the Universal Naming Convention (UNC) Port Name, which consists of the server name and the distinctive

printer name that was specified in step 2 on page 111. The name should be in the form \\server\printer. f Click OK. g Click Close on the Printer Ports dialog. h Make sure the new port is selected on the Ports tab, and then click Apply.

i Click OK.

Sharing a printer in a Macintosh environment

1 From the Finder, choose Help > Mac Help.

2 In the Search field, type sharing the printer on a network, and then press return.

  • 3 Select only one of the following:
  • Sharing your printer with Mac OS X users —Let other Macintosh computers on the network that use Mac OS X version 10.4 or later use any printer connected to your Macintosh computer.
  • Sharing your printer with Windows users —Let Windows computers on the network use any printer connected to your Macintosh computer.

4 Follow the instructions on the computer screen.

Networking 111 · 1 Click · 1 Click

Page 112 of the Lexmark 91E user manual — Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?
Page 112 · click to enlarge
Page 112

Networking FAQ

What is Wi ‑ Fi Protected Setup?

Wi‑Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless home network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices.

The printer supports the following methods in connecting to a wireless network:

  • Personal Identification Number (PIN)—A PIN on the printer is entered into the wireless settings of the access point.
  • Push Button Configuration (PBC)—Buttons on both the printer and the access point are pushed within a given period of time.

Look for any of these identifier marks to check if your access point is WPS certified:

You can find these WPS logos on the side, back, or top of your access point.

For more information on accessing the wireless settings and determining the WPS capability of your access point, see the documentation that came with the access point or contact your system support person.

Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?

  • Contact your system support person. – The person who set up your network usually keeps the WEP key or WPA/WPA2 preshared key/passphrase. – If your wireless network was set up by your Internet Service Provider (ISP), then you might find the information

in the documentation they provided. • See the documentation that came with your access point (wireless router).

If your access point is using the default settings, then you can find the information in the documentation. • View the security settings on the access point. 1 Open a Web browser, and then type the IP address of the access point in the address field. Press Enter.

– To obtain the IP address of the access point, see the documentation that came with it or contact your

system support person. – If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Enter the user name and password for the access point when prompted.

Networking 112

Page 113 of the Lexmark 91E user manual — WEP
Page 113 · click to enlarge
Page 113

What is an SSID?

A Service Set Identifier (SSID) is the name that identifies a wireless network. All devices on the network must know the SSID of the wireless network, or they will not be able to communicate with each other. Usually, the wireless network broadcasts the SSID to allow wireless devices in the area to connect to it. Sometimes, the SSID is not broadcast for security reasons.

If the SSID of your wireless network is not broadcast, then it cannot be detected automatically and will not show up in the list of available wireless networks. You must enter the network information manually in this situation.

An SSID can contain up to 32 alphanumeric characters. Alphanumeric characters are a combination of alphabetic (letters A to Z) and numeric (numbers 0 to 9) characters.

Where do I find my SSID?

  • View the settings on the access point (wireless router).

Most access points have a built‑in Web server that can be accessed using a Web browser. • Check your computer to see if a program was installed with your wireless network adapter.

Many network adapters provide a software application that allows you to view the wireless settings of your computer, including your SSID.

If you are unable to locate your SSID using either of these methods, then contact your system support person.

What is a network?

A network is a collection of devices such as computers, printers, Ethernet hubs, access points, and routers connected together for communication through cables or through a wireless connection. A network can be wired, wireless, or designed to have both wired and wireless devices.

How do I find out what type of security my network is using?

  • Contact your system support person.
  • The person who set up your network usually keeps your wireless information.
  • See the documentation that came with your access point (wireless router).
  • Check the characters of the password that you use to access your wireless network.

If you are not using a password, then choose None or No Security.

Exactly 10 or 26 hexadecimal characters

WEP

Exactly 5 or 13 ASCII characters

Exactly 64 hexadecimal characters

From 8 to 63 ASCII characters

– Hexadecimal characters are A–F, a–f, and 0–9.

Show 5 more labels / short text on this page
Networking 113 · Characters Security type · or · WPA or WPA2 · or
Page 114 of the Lexmark 91E user manual — Wireless network examples
Page 114 · click to enlarge
Page 114

– ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA/WPA2

preshared key/passphrase are case‑sensitive. • View the security settings on the access point. 1 Open a Web browser. Type the IP address of the access point in the address field, and then press Enter.

– To obtain the IP address of the access point, see the documentation that came with it, or contact your

system support person. – If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Enter the user name and password for the access point when prompted.

How are home networks configured?

For desktop computers, laptops, and printers to communicate with each other over a network, they must be connected by cables and/or have wireless network adapters built in or installed in them.

There are many different ways a network can be set up. Four common examples appear below.

Wireless network examples

Scenario 1Mixed wired and wireless connections on a network with Internet access
  • All computers and printers connect to the network through a router with Ethernet and wireless capabilities.
  • Some computers and printers connect wirelessly to the router; others connect over a wired connection.
  • The network is connected to the Internet through a DSL or cable modem.
Lexmark 91E — Wireless network examples diagram (page 114)
Fig. 81 · Wireless network examples

Networking 114

Page 115 of the Lexmark 91E user manual — How are home networks configured?
Page 115 · click to enlarge
Page 115
Scenario 2Wireless network with Internet access
  • All computers and printers connect to the network using a wireless access point or wireless router.
  • The wireless access point connects the network to the Internet through a DSL or cable modem.
Lexmark 91E — How are home networks configured? diagram (page 115)
Fig. 82 · How are home networks configured?
Scenario 3Wireless network with no Internet access
  • Computers and printers connect to the network using a wireless access point.
  • The network has no connection to the Internet.
Lexmark 91E — How are home networks configured? diagram (page 115)
Fig. 83 · How are home networks configured?
Scenario 4Computer connected wirelessly to a printer without Internet access
  • A computer is directly connected to a printer without going through a wireless router.
  • This configuration is referred to as an ad hoc network .
  • The network has no connection to the Internet.

Networking 115

Page 116 of the Lexmark 91E user manual — How do I attach the USB cable?
Page 116 · click to enlarge
Page 116

What is a USB cable?

A Universal Serial Bus (USB) cable is primarily used to connect a USB device to a host. Common hosts include computers and video game consoles. Through the USB port and cable, it is possible to connect computer peripherals such as mouse devices, keyboards, digital cameras, printers, personal media players, flash drives, and external hard drives. For many of those devices, USB has become the standard connection method.

Why do I need a USB cable?

When setting up the printer on your wireless network, the printer will need to temporarily connect to a computer using the USB cable. This temporary connection may be used to set up the wireless settings of the printer.

How do I attach the USB cable?

The USB cable attaches to a USB port on the computer and to the square connector on the back of the printer. This connection allows you to configure the printer for a network or local (USB) installation.

The USB port on the computer and on the printer are each marked with .

1 If the USB port at the back of the printer is covered by a sticker, then make sure to remove it.

Lexmark 91E — How do I attach the USB cable? diagram (page 116)
Fig. 84 · How do I attach the USB cable?
Lexmark 91E — How do I attach the USB cable? diagram (page 116)
Fig. 85 · How do I attach the USB cable?

Networking 116

Page 117 of the Lexmark 91E user manual — How are infrastructure and ad hoc networks different?
Page 117 · click to enlarge
Page 117

2 Firmly plug the square end of the USB cable into the back of the printer.

Lexmark 91E — How are infrastructure and ad hoc networks different? diagram (page 117)
Fig. 86 · How are infrastructure and ad hoc networks different…
Lexmark 91E — How are infrastructure and ad hoc networks different? diagram (page 117)
Fig. 87 · How are infrastructure and ad hoc networks different…

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

Lexmark 91E — How are infrastructure and ad hoc networks different? diagram (page 117)
Fig. 88 · How are infrastructure and ad hoc networks different…

4 Follow the instructions on the computer screen.

How are infrastructure and ad hoc networks different?

Wireless networks can operate in one of two modes: infrastructure or ad hoc.

In infrastructure mode, all devices on a wireless network communicate with each other through an access point (wireless router).

In ad hoc mode, a computer with a wireless network adapter communicates directly with a printer equipped with a wireless print server.

Lexmark 91E — How are infrastructure and ad hoc networks different? diagram (page 117)
Fig. 89 · How are infrastructure and ad hoc networks different…

Range Determined by the range and number of access points

Restricted to the range of individual devices on the network

Networking 117

Page 118 of the Lexmark 91E user manual — Checking printer connectivity
Page 118 · click to enlarge
Page 118

Requirements for all devices

Unique IP address for each device Yes Yes

Mode set to Infrastructure mode Ad hoc mode

Same SSID Yes, including the access point Yes

Same channel Yes, including the access point Yes

We recommend setting up a network in infrastructure mode using the installation software CD. Infrastructure mode provides:

  • Increased network security
  • Increased reliability
  • Faster performance
  • Easier setup

Finding the signal strength

The signal strength tells you how strongly the computer or printer is receiving the wireless signal from the wireless network. Poor signal quality could affect connectivity during configuration.

Checking computer connectivity

1 From your computer system tray, click the wireless icon that corresponds to the software managing your wireless network adapter.

2 Check the signal quality.

Checking printer connectivity

  • From the printer, print a network setup page.

In the Wireless section, look for Quality. • View the signal strength from the printer control panel.

Navigate to:

> Network Setup > Wireless Networking

The signal bars indicating the signal quality appear beside the network name.

To improve signal quality, remove sources of interference and/or move wireless devices closer to the access point (wireless router).

Networking 118 · Infrastructure Ad hoc

Page 119 of the Lexmark 91E user manual — R EMOVE SOURCES OF INTERFERENCE
Page 119 · click to enlarge
Page 119

How can I improve wireless signal strength?

A common reason wireless printers fail to communicate over a network is poor wireless signal quality. If the signal is too weak, too distorted, or blocked by an object, then it cannot carry information between the access point (wireless router) and the printer.

If you think signal strength is a problem between your access point and the printer, then try one or more of the following:

  • The solutions below are for infrastructure networks. If you are using an ad hoc network, then adjust the computer when the solution suggests adjusting the access point.
  • Ad hoc networks have a much shorter range than infrastructure networks. Try moving the printer closer to the computer if they seem to have trouble communicating.

C HECK THE WIRELESS SIGNAL QUALITY

To determine if the printer is receiving a strong signal from the access point, print a network setup page. The Quality field indicates the relative strength of the wireless signal the printer is receiving. Drops in signal strength can be intermittent, however, and although the signal quality appears high, it may drop during certain conditions. If the signal quality is listed as good or excellent, then another factor is causing the problem.

For more information on printing a network setup page, see the User's Guide.

M OVE THE PRINTER CLOSER TO THE ACCESS POINT

If the printer is too far away from the access point, then it will not be able to communicate with other devices on the network. For most indoor wireless networks, the maximum distance between the access point and the printer is approximately 100 feet (30 meters). This distance could be longer or shorter, depending upon the layout of the network and the limitations of the access point.

R EMOVE OBSTACLES BETWEEN THE ACCESS POINT AND THE PRINTER

The wireless signal from your access point will pass through most objects. Most walls, floors, furniture, and other objects will not block the wireless signal. However, there are materials that are too dense for the signal to pass through, such as objects containing metal and concrete. Arrange your printer and access point so that the signal is not blocked by such objects.

R EMOVE SOURCES OF INTERFERENCE

Other types of radio frequencies can cause problems with the wireless signal on your network, resulting to printing issues that seem to come and go.

  • Turn off potential sources of interference where possible.
  • Avoid using microwave ovens, cordless phones (but not cellular phones), baby monitors, almost any kitchen appliance, wireless surveillance equipment, or any appliance containing a motor when printing over your wireless network.
  • If another wireless network is operating in the vicinity, then change the wireless channel on the access point.
  • Do not place your access point on a printer or other electronic device. Such devices can also interfere with the wireless signal.

Networking 119

Page 120 of the Lexmark 91E user manual — For Windows users
Page 120 · click to enlarge
Page 120

A RRANGE THE NETWORK TO REDUCE SIGNAL ABSORPTION

Even when the wireless signal is able to pass through an object, it is slightly weakened. If it passes through too many objects, then it can be significantly weakened. All objects absorb part of the wireless signal when it passes through them, and certain types of objects absorb enough to cause communications problems. Place your access point as high in the room as possible to avoid signal absorption.

How can I make sure my computer and printer are connected to the same wireless network?

If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.

For Windows users

1 Obtain the SSID of the network that the computer is connected to: a Type the IP address of your access point (wireless router) in the address field of your Web browser.

If you do not know the IP address of the access point:

  • , or click Start and then click Run . 2 In the Start Search or Run box, type cmd . 3 Press Enter , or click OK . 4 Type ipconfig , and then press Enter . Check the Wireless Network Connection section:
  • The “Default Gateway” entry is typically the access point.
  • The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134. b Type the user name and password of the router when prompted.

c Click OK. d In the Wireless settings section, look for the SSID. e Write down the SSID.

2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID.

3 Compare the SSID of the computer and SSID of the printer.

If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.

If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.

Networking 120 · 1 Click

Page 121 of the Lexmark 91E user manual — For Macintosh users with an access point
Page 121 · click to enlarge
Page 121

For Macintosh users with an AirPort base station

In Mac OS X version 10.5 or later

1 From the Apple menu, navigate to:

System Preferences > Network > AirPort

The SSID of the network that the computer is connected to is displayed in the Network Name menu.

2 Write down the SSID.

In Mac OS X version 10.4 or earlier

1 From the Finder, navigate to:

Applications > Internet Connect > AirPort

The SSID of the network that the computer is connected to is displayed in the Network menu.

2 Write down the SSID.

For Macintosh users with an access point

1 Type the IP address of the access point in the address field of your Web browser and continue to step 2.

If you do not know the IP address of the access point, then do the following:

a From the Apple menu, navigate to:

System Preferences > Network > AirPort b Click Advanced or Configure.

c Click TCP/IP. The Router entry is typically the access point.

2 Type your user name and password when prompted, and then click OK.

3 In the Wireless settings section, look for the SSID.

4 Write down the SSID, security type, and the WEP key/WPA passphrase (if shown).

  • Make sure you copy the network information down exactly, including any capital letters.
  • Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

Can I use my printer on a USB and a network connection at the same time?

Yes; the printer supports a simultaneous USB and network connection. The printer can be configured in the following ways:

  • Locally attached (connected to a computer using a USB cable)
  • Wireless network
  • Ethernet network
  • Wireless network and locally attached simultaneously
  • Ethernet network and locally attached simultaneously

Networking 121

Page 122 of the Lexmark 91E user manual — MAC: XX XX XX XX XX XX
Page 122 · click to enlarge
Page 122

What is a MAC address?

A Media Access Control (MAC) address is a 48‑bit identifier associated with the hardware of network equipment. The MAC address may also be called the physical address because it is connected to the hardware of a device instead of its software. The MAC address is displayed as a hexadecimal number in this format: 01-23-45-67-89-AB.

While it is possible to change the MAC address of a network device, it is not common practice to do so. For this reason, MAC addresses are considered permanent. IP addresses are easily changed, so MAC addresses are a more reliable method of identifying a specific device on a network.

Routers with security capabilities may allow filtering of MAC addresses on networks. This allows a managed list of devices to access the network, identified by their MAC addresses, as well as prevent access from unwanted devices. If your network uses MAC address filtering, then be sure to add the MAC address of the printer to the list of allowed devices.

How do I find the MAC address?

Network devices have a unique hardware identification number to distinguish them from other devices on the network. This is called the MAC (Media Access Control) address. Other devices sometimes use a type of MAC address called Universally Administered Address (UAA).

When installing the printer on a network, make sure you select the printer with the correct MAC address.

Lexmark 91E — How do I find the MAC address? diagram (page 122)
Fig. 90 · How do I find the MAC address?
Lexmark 91E — How do I find the MAC address? diagram (page 122)
Fig. 91 · How do I find the MAC address?

MAC: XX

www.lexmark.com

Pro715 INK COMPATIBILITY CHART

Magenta 150, 150A, 150XL, 150XLA, 155, 155A Yellow 150, 150A, 150XL, 150XLA, 155, 155A, 155XL, 155XLA Black Cyan

MAC: XX

MT/MN: 4449-70E

The MAC address of the internal print server is a series of letters and numbers.

MAC: XX

Show 4 more labels / short text on this page
Networking 122 · xxxxxxxxxxxxxx · Serial Number · xxxxxxxxxxxxxx Serial Number
Page 123 of the Lexmark 91E user manual — For Macintosh users
Page 123 · click to enlarge
Page 123
  • A list of MAC addresses can be set on an access point (wireless router) so that only devices with matching MAC addresses are allowed to operate on the network. This is called MAC filtering . If MAC filtering is enabled in your access point and you want to add a printer to your network, then the MAC address of the printer must be included in the MAC filter list.
  • If you are using an AirPort base station, then the MAC address may be referred to as AirPort ID , and MAC address filtering may be accessed through MAC Address Access Control .

What is an IP address?

An IP address is a unique number used by devices (such as a wireless printer, computer, or access point (wireless router)) on an IP network to locate and communicate with each other. Devices on an IP network can communicate with each other only if they have unique and valid IP addresses. A unique IP address means no two devices on the same network have the same IP address.

An IP address is a group of four numbers separated by periods. An example of an IP address is 123.123.123.123.

What is TCP/IP?

Networks are able to function when computers, printers, and other devices are able to send data to each other, either through cables or wireless signals. This transfer of data is made possible by sets of data transmission rules called protocols. A protocol can be thought of as a language that has rules so that participants can effectively communicate with each other.

Different types of networks use different protocols, but Transmission Control Protocol/Internet Protocol (TCP/IP) is the most popular. TCP/IP is used to send data over the Internet as well as over most corporate and home networks.

Every device on a network that uses TCP/IP must have an IP address. IP addresses are essentially unique computer names in a numeric format, used to transfer data around a network. IP addresses allow TCP/IP to confirm requests for, and receipt of, data by various devices on the network.

How do I locate IP addresses?

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run dialog, type cmd.

3 Press Enter, or click OK.

4 Type ipconfig, and then press Enter.

The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.

For Macintosh users

1 From the Apple menu, navigate to:

About This Mac > More Info

2 From the Contents pane, choose Network.

3 If you are connected over a wireless network, then choose AirPort from the Active Services list.

Networking 123 · 1 Click

Page 124 of the Lexmark 91E user manual — What is the difference between Guided and Advanced setup?
Page 124 · click to enlarge
Page 124

Locating the printer IP address

  • From the printer, print a network setup page.

In the TCP/IP section, look for Address. • View the printer settings. 1 From the printer control panel, navigate to:

> Network Setup > TCP/IP > IPv4 2 Look for IP Address.

How are IP addresses assigned?

An IP address may be assigned automatically by the network using DHCP. Once the printer is set up on a computer, the computer sends all print jobs across the network to the printer using this address.

If the IP address is not automatically assigned, you will be asked during wireless setup to manually enter an address and other network information after selecting your printer from the available list.

What is a key index?

An access point (wireless router) can be configured with as many as four WEP keys. Only one key is used on the network at a time, however. The keys are numbered, and the number of a key is referred to as its key index. All devices on the wireless network must be configured to use the same key index when multiple WEP keys are configured on the access point.

Select the same key index on your printer as you are using on your access point.

What is the difference between Guided and Advanced setup?

Use Guided setup if:

  • The printer and the computer communicate on the same wireless network.
  • You want the Wireless Setup Utility to automatically detect the network for you.
  • You want to connect your printer to the wireless network using Wi ‑ Fi Protected Setup (WPS).

Use Advanced setup if:

  • The printer and the installing computer are not on the same wireless network, or if the computer does not have wireless access.
  • The wireless network requires certificates.
  • Enterprise ‑ level security is employed on the wireless network.
  • You know the network SSID and security information and want to enter the information on a single screen.
  • The printer will be configured for a remote network.
  • You know your network information and want to enter it quickly.
  • You are configuring a printer for a wireless network that uses 802.1X authentication.

Networking 124

Page 125 of the Lexmark 91E user manual — For Windows users
Page 125 · click to enlarge
Page 125

Using SmartSolutions

What are SmartSolutions?

SmartSolutions are solutions that you can create, customize, and download from the SmartSolutions Web site (http://smartsolutions.lexmark.com) to your printer. You can create one-touch custom solutions to streamline repetitive copying, scanning, and printing tasks. You can also view RSS feeds, calendars, and online photo albums from the printer control panel.

To access a solution you created or customized, touch SmartSolutions on the printer control panel, and then select the icon or name of the solution.

For solutions with an option to send an e‑mail, you must first set up your printer to e‑mail through from the home screen.

Creating and customizing printer solutions

Before you begin, make sure:

  • Your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
  • Your printer is turned on.

1 Go to the SmartSolutions Web site at http://smartsolutions.lexmark.com.

2 Select the solutions you want to add to your printer.

3 Sign in or create an account.

4 Click Configure my SmartSolutions.

5 Use the Web site to customize and download the solutions to your printer.

For more information, click HELP on the SmartSolutions Web site.

Creating and customizing printer solutions

Before you begin, make sure:

  • Your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
  • Your printer is powered on.

1 Launch the SmartSolutions Web site:

Using the printer software

a Open the printer program folder:

For Windows users

or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list.

Using SmartSolutions 125 · 1 Click

Page 126 of the Lexmark 91E user manual — Using a Web browser
Page 126 · click to enlarge
Page 126

For Macintosh users

From the Finder desktop, double-click the printer program folder. b Click Visit Lexmark SmartSolutions.

Using a Web browser

a Open a Web browser. b Type smartsolutions.lexmark.com in the address bar, and then press Enter.

2 From the SmartSolutions Web site, log in or create an account.

3 Add your printer.

4 Use the Web site to create, customize, and download solutions to your printer.

For more information, see the SmartSolutions User's Guide on the Web site.

Using SmartSolutions 126

Page 127 of the Lexmark 91E user manual — Aligning the printhead
Page 127 · click to enlarge
Page 127

Maintaining the printer 127

Maintaining the printer

Maintaining ink cartridges

In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off.

Checking ink levels

Using the printer control panel

From the home screen, touch

The graphic of the ink levels appears on the display.

Using the printer software

or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Navigate to:

Printer Home > select your printer > Maintenance tab > Supplies Status

1 From the Apple menu, navigate to:

System Preferences > Print & Fax > select your printer

2 Click Options & Supplies or Print Queue.

3 Click Supply Levels.

Aligning the printhead

If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead.

1 Load plain paper.

2 From the home screen, navigate to:

> More Options > Align Printer

An alignment page prints.

For Windows users · 1 Click · For Macintosh users

Page 128 of the Lexmark 91E user manual — Cleaning the exterior of the printer
Page 128 · click to enlarge
Page 128

Maintaining the printer 128

Cleaning the printhead nozzles

If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical outlet to allow your device to perform automatic maintenance cycles.

  • Cleaning the printhead nozzles uses ink, so clean them only when necessary.
  • Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
  • If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead nozzles.

1 From the home screen, navigate to:

2 Touch Clean Printhead or Deep Clean Printhead.

A cleaning page prints.

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove all paper from the printer.

3 Dampen a clean, lint‑free cloth with water.

4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the exit bin.

5 Make sure the printer is dry before beginning a new print job.

> More Options

Page 129 of the Lexmark 91E user manual — Cleaning the touch screen
Page 129 · click to enlarge
Page 129

Maintaining the printer 129

Cleaning the scanner glass

Clean the scanner glass and other related parts when vertical streaks appear on your printed pages or when you see marks or smudges on such parts.

1 Dampen a clean, lint‑free cloth with water.

2 Gently wipe clean the scanner glass and other related parts.

Lexmark 91E — Cleaning the scanner glass diagram (page 129)
Fig. 92 · Cleaning the scanner glass

3 ADF scanner glass

4 ADF press plate

Cleaning the touch screen

The touch screen of your printer control panel may need to be cleaned from time to time to remove fingerprints and smudges.

1 Make sure the printer is turned off and unplugged from the wall outlet.

2 Wipe the touch screen with the cloth that came with your printer or with another clean, dry, lint‑free cloth.

1 Backing material · 2 Scanner glass

Page 130 of the Lexmark 91E user manual — Moving the printer to another location
Page 130 · click to enlarge
Page 130

Maintaining the printer 130

Moving the printer to another location

When moving the printer and optional tray to another location, follow these precautions:

  • Make sure the printer is turned off.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer and the dimensions of the optional tray.
  • Remove all paper from the trays.
  • Make sure the paper stop and paper trays are in their original positions.
  • Keep the printer in an upright position to prevent the ink from leaking.
Lexmark 91E — Moving the printer to another location diagram (page 130)
Fig. 93 · Moving the printer to another location
  • Avoid severe jarring movements.
Page 131 of the Lexmark 91E user manual — Setup troubleshooting
Page 131 · click to enlarge
Page 131

Troubleshooting

Before you troubleshoot

Use this checklist to solve most printer problems:

  • Make sure the power cord is plugged into the printer and into a properly grounded, working electrical outlet.
  • Make sure the printer is turned on.
  • Make sure the printer is securely connected to the computer, print server, or network access point.
  • Check the printer for error messages, and resolve any errors.
  • Check for paper jam messages, and clear any jams.
  • Check the ink cartridges, and install new cartridges if necessary.
  • Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Troubleshooting does not solve your problem

Visit our Web site at http://support.lexmark.com to find the following:

  • Knowledgebase articles with the latest information and troubleshooting for your printer
  • Live online customer support
  • Contact numbers for telephone customer support
  • Firmware and software updates

Setup troubleshooting

  • “Incorrect language appears on the display” on page 132
  • “Software did not install” on page 132
  • “Print job does not print or is missing pages” on page 133
  • “Printer is printing blank pages” on page 134
  • “Printer is busy or does not respond” on page 134
  • “Cannot delete documents from the print queue” on page 135
  • “Cannot print through USB” on page 135

Troubleshooting 131

Page 132 of the Lexmark 91E user manual — R ECONNECT THE PRINTER POWER SUPPLY
Page 132 · click to enlarge
Page 132

Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try the following:

C HANGE THE LANGUAGE USING THE PRINTER MENUS

1 From the home screen, navigate to:

> Device Setup > Language

2 Select a language, and then touch Accept.

3 Touch Yes to confirm this setting.

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.

Before you reinstall the software, do the following:

M AKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS

T EMPORARILY DISABLE SECURITY PROGRAMS IN W INDOWS BEFORE INSTALLING THE SOFTWARE

C HECK THE USB CONNECTION

1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2 Firmly plug the square end of the USB cable into the back of the printer.

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with .

R ECONNECT THE PRINTER POWER SUPPLY

1 Turn off the printer.

2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.

3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.

4 Turn on the printer.

Troubleshooting 132

Page 133 of the Lexmark 91E user manual — R EMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
Page 133 · click to enlarge
Page 133

Print job does not print or is missing pages

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

M AKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY

1 Turn the printer on, and then open the printer.

2 Make sure the cartridges are inserted correctly.

The cartridges should click firmly into the matching color slot of the printhead.

3 Close the printer.

SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB

1 With a document open, choose File > Print.

2 From the printer pop-up menu, choose your printer, and then click Print.

If your printer does not appear in the Printer list, then choose Add Printer. From the list of printers in the Default tab, select your printer, and then click Add.

If your printer does not appear in the list, then try either of the following:

  • For a USB-connected printer, remove and then reconnect the USB cable.
  • For a printer that is wirelessly connected, see the Wireless troubleshooting section.

M AKE SURE THE PRINT JOB IS NOT PAUSED

M AKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER

R ECONNECT THE PRINTER POWER SUPPLY

1 Turn off the printer.

2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.

3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.

4 Turn on the printer.

R EMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER

C HECK THE USB CONNECTION

1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2 Firmly plug the square end of the USB cable into the back of the printer.

Troubleshooting 133

Page 134 of the Lexmark 91E user manual — M AKE SURE THE PRINTER IS NOT IN S LEEP MODE
Page 134 · click to enlarge
Page 134

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with .

R EMOVE AND REINSTALL THE PRINTER SOFTWARE

Printer is printing blank pages

Blank pages may be caused by improperly installed ink cartridges.

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

R EPLACE THE INK CARTRIDGES

For more information, see “Replacing ink cartridges” on page 14.

C LEAN THE PRINTHEAD NOZZLES

1 Load plain, unmarked paper.

2 From the home screen, navigate to:

3 Touch Clean Printhead or Deep Clean Printhead.

A cleaning page prints.

A LIGN THE PRINTHEAD

1 Load plain, unmarked paper.

2 From the home screen, navigate to:

> More Options > Align Printer

An alignment page prints.

Printer is busy or does not respond

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

M AKE SURE THE PRINTER IS NOT IN S LEEP MODE

If the power light is blinking on and off slowly, then the printer is in Sleep mode. Press to wake up the printer.

Troubleshooting 134 · > More Options

Page 135 of the Lexmark 91E user manual — M AKE SURE THE USB PORT IS ENABLED IN W INDOWS
Page 135 · click to enlarge
Page 135

If the printer will not come out of Sleep mode, then reset the power:

1 Unplug the power cord from the wall outlet, and then wait 10 seconds.

2 Insert the power cord into the wall outlet, and then turn on the printer.

If this problem persists, then check our Web site for updates for your printer software or firmware.

R ECONNECT THE PRINTER POWER SUPPLY

1 Turn off the printer.

2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.

3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.

4 Turn on the printer.

Cannot delete documents from the print queue

If you have jobs stuck in the print queue and cannot delete them to get other jobs to print, then the computer and printer may not be communicating.

R ESTART THE COMPUTER AND TRY AGAIN

R EMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER

Cannot print through USB

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C HECK THE USB CONNECTION

1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2 Firmly plug the square end of the USB cable into the back of the printer.

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with .

M AKE SURE THE USB PORT IS ENABLED IN W INDOWS

, or click Start and then click Run.

2 In the Start Search or Run box, type devmgmt.msc.

Troubleshooting 135 · 1 Click

Page 136 of the Lexmark 91E user manual — Change [Paper Source] to [Size] Paper
Page 136 · click to enlarge
Page 136

3 Press Enter, or click OK.

The Device Manager opens.

4 Click the plus sign (+) beside Universal Serial Bus controllers.

If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.

For more information, see the computer documentation.

R EMOVE AND REINSTALL THE PRINTER SOFTWARE

Understanding printer messages

Alignment Problem

Try any of the following:

  • Check the ink cartridges. 1 Open the printer, and then remove and reinstall the ink cartridges. 2 Load a plain and unmarked A4 ‑ or letter ‑ size paper. The printer will read any markings on used paper, which could cause the alignment error message to reappear. 3 Close the printer.

4 Touch OK or press to retry, depending on your printer model. • Press to clear the message.

Cannot Collate Job

Try one or more of the following:

  • Touch Continue to print the pages that were saved in the printer memory, and then collate the remainder of the print job.
  • Touch Cancel Printing to cancel the current print job.

Change [Paper Source] to [Size] Paper

Try one or more of the following:

  • Select the paper tray with the correct paper size or type.
  • Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default paper tray.
  • Press to cancel the current job.

Troubleshooting 136

Page 137 of the Lexmark 91E user manual — Default E ‑ mail Message
Page 137 · click to enlarge
Page 137

Change [Paper Source] to [Size] [Type] Paper

Try one or more of the following:

  • Select the paper tray with the correct paper size or type.
  • Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default paper tray.
  • Press to cancel the current job.

Close Printer

The printer is open. Close the printer to clear the message.

Communication Error

The printer cannot communicate with the requested destination. Try one or more of the following:

  • Make sure your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
  • Make sure your printer is securely connected to the host computer, print server, or other network access point.
  • Touch OK to clear the message.

Default E ‑ mail Message

Try one or more of the following:

  • Touch Yes to set the message you entered as the default e ‑ mail message for the printer.
  • Touch No to keep the new message for the current job only.

Troubleshooting 137

Page 138 of the Lexmark 91E user manual — Ink Cartridge Error
Page 138 · click to enlarge
Page 138

Duplex Unit Missing

Try one or more of the following:

  • Make sure the duplex unit is properly installed at the back of the printer to clear the message.
Lexmark 91E — Duplex Unit Missing diagram (page 138)
Fig. 94 · Duplex Unit Missing

LINE

EXT

Lexmark 91E — LINE diagram (page 138)
Fig. 95
  • Cancel the current job.

E ‑ mail Server Not Specified

Try one or more of the following:

  • Touch Continue to return to the previous menu.
  • Make sure that the e ‑ mail server has been specified.

From the home screen, touch > E‑mail Setup > SMTP Setup. Enter the SMTP server settings, and then touch OK or Accept to save each item. • If necessary, make sure that the network to which your printer connects has an Internet connection. Some e‑mail servers may not require an Internet connection, such as those that are set up in private networks. For more information on your e-mail account settings, contact your e‑mail provider or your system support person.

E ‑ mail Transmission Error

Try one or more of the following:

  • Make sure the printer is connected to an Ethernet or wireless network before sending an e-mail.
  • The printer supports only one active network connection (Ethernet or wireless) at a time.
  • If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person.
  • Make sure the SMTP server settings are correct.
  • Touch OK to clear the message.

Ink Cartridge Error

The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following:

  • Press to cancel the current job.
  • Use only genuine Lexmark ink cartridges.
  • Install the specified ink cartridges properly.

Troubleshooting 138

Page 139 of the Lexmark 91E user manual — Load [Paper Source] with [Size] Paper
Page 139 · click to enlarge
Page 139
  • Turn the printer off, wait about 10 seconds, and then turn the printer back on.

Ink Cartridge Missing

Try one or more of the following:

  • Install the specified missing ink cartridge or cartridges.
  • Reinsert the specified ink cartridge or cartridges.
  • If a Cartridge Finder widget has been downloaded to your printer, then touch Find Ink .
  • The Cartridge Finder solution available in the SmartSolutions menu appears.
  • Touch OK to clear the message.
  • See the User's Guide or visit the Lexmark Support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> for a list of supported ink cartridges.

Ink Cartridge Unsupported

Try one or more of the following:

  • Replace the unrecognized ink cartridge with one that is supported by your printer.
  • If a Cartridge Finder widget has been downloaded to your printer, then touch Find Ink .
  • The Cartridge Finder solution available in the SmartSolutions menu appears.
  • Touch OK to clear the message.
  • See the User's Guide or visit the Lexmark Support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> for a list of supported ink cartridges.

Ink Low

You may need to replace the specified ink cartridge soon. Try one or more of the following:

  • If a Cartridge Finder widget has been downloaded to you printer, then touch Find Ink .

The Cartridge Finder solution available in the SmartSolutions menu appears. • Touch OK to clear the message and continue printing.

Load [Paper Source] with [Size] Paper

Try one or more of the following:

  • Load the specified paper in the tray.
  • Touch Paper Loaded, Continue to clear the message and continue printing.
  • Press to cancel the current job.

Troubleshooting 139

Page 140 of the Lexmark 91E user manual — Paper Tray [x] Detected
Page 140 · click to enlarge
Page 140

Load [Paper Source] with [Size] [Type] Paper

Try one or more of the following:

  • Load the specified paper in the tray.
  • Touch Paper Loaded, Continue to clear the message and continue printing.
  • Press to cancel the current job.

Memory Device Error

Try one or more of the following:

  • Remove the memory device, and then reinsert it into the card slot or USB port.
  • Touch OK or press to clear the message.

Network [x] Software Error

[x] is the number of the network connection.

Try one or more of the following:

  • Touch Continue to clear the message.
  • Turn the printer off and then back on to reset the printer.

No E ‑ mail Address

The e‑mail contact or at least one member of the group you selected does not have an e‑mail address. Try one or more of the following:

  • Touch Yes to enter the e ‑ mail address, and then touch Accept every time you add a recipient.
  • Touch Edit the Group to enter the missing e ‑ mail addresses, and then touch Accept every time you add a recipient.
  • Touch Send Anyway to send the e ‑ mail only to group members with e ‑ mail addresses.
  • Touch No to cancel the e ‑ mail.

Out of Paper in Tray [x]

Try one or more of the following:

  • Load the specified paper in the tray.
  • Touch Paper Loaded, Continue to clear the message and continue printing.
  • Press to cancel the current job.

Paper Tray [x] Detected

Try one or more of the following:

  • Touch Yes to clear the message.
  • Touch Change Settings , and then select the paper size and paper type of the media loaded. Touch Accept for each selection.

Troubleshooting 140

Page 141 of the Lexmark 91E user manual — Remove and reinsert the printhead
Page 141 · click to enlarge
Page 141

Paper Tray [x] Removed

Insert the specified paper tray into the printer, or touch OK.

Printer Memory Full

Touch OK or press to clear the message, depending on your printer model.

Printhead Cannot Move

Try one or more of the following:

  • Touch OK .
  • Open the printer to remove any obstructions to the printhead, and then close the printer.

Printhead Error

Remove and reinsert the printhead

1 Open the printer, and then lift the latch.

Lexmark 91E — Remove and reinsert the printhead diagram (page 141)
Fig. 96 · Remove and reinsert the printhead

2 Remove the printhead.

Lexmark 91E — Remove and reinsert the printhead diagram (page 141)
Fig. 97 · Remove and reinsert the printhead

Troubleshooting 141

Page 142 of the Lexmark 91E user manual — Printhead Missing
Page 142 · click to enlarge
Page 142

3 Wipe the printhead contacts and the contacts inside the printhead carrier using a clean, lint‑free cloth.

Lexmark 91E — Printhead Missing diagram (page 142)
Fig. 98 · Printhead Missing

4 Reinsert the printhead, and then close the latch until it clicks into place.

Lexmark 91E — Printhead Missing diagram (page 142)
Fig. 99 · Printhead Missing
Lexmark 91E — Printhead Missing diagram (page 142)
Fig. 100 · Printhead Missing

5 Close the printer.

Printhead Missing

Try one or more of the following:

  • Install the printhead. 1 Open the printer, and then lift the carrier latch.
Lexmark 91E — Printhead Missing diagram (page 142)
Fig. 101 · Printhead Missing

Troubleshooting 142

Page 143 of the Lexmark 91E user manual — IIIIIIIIIIII
Page 143 · click to enlarge
Page 143

2 Insert the printhead, and then close the latch until it clicks into place.

Lexmark 91E — Printhead Unsupported diagram (page 143)
Fig. 102 · Printhead Unsupported
Lexmark 91E — Printhead Unsupported diagram (page 143)
Fig. 103 · Printhead Unsupported
  • Note: Make sure to install the ink cartridges into the printhead. For more information, see “Replacing ink cartridges” in the User’s Guide . 3 Close the printer.
  • Touch or to clear the message.
  • If your printer did not come with a printhead, then visit the Lexmark support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , or contact customer support for more information.
  • If the message appears even if the printhead is already installed, then see “Printhead Error” in the User’s Guide .

Printhead Unsupported

Try one or more of the following:

  • Turn the printer off, and then turn it back on.
  • Install a supported printhead. 1 Open the printer. 2 Press the release tab, and then remove the cartridges.
Lexmark 91E — Printhead Unsupported diagram (page 143)
Fig. 104 · Printhead Unsupported

IIIIIIIIIIII

IIIIIIII IIIIIIII

3 Lift the carrier latch.

Lexmark 91E — IIIIIIIIIIII diagram (page 143)
Fig. 105
Lexmark 91E — IIIIIIIIIIII diagram (page 143)
Fig. 106
Lexmark 91E — IIIIIIIIIIII diagram (page 143)
Fig. 107

Troubleshooting 143

Page 144 of the Lexmark 91E user manual — Proxy Error
Page 144 · click to enlarge
Page 144

4 Remove the unsupported printhead.

Lexmark 91E — Printhead Warning diagram (page 144)
Fig. 108 · Printhead Warning

5 Insert the supported printhead, and then close the latch until it clicks into place.

Printhead Warning

One or more cartridges may have been missing for more than two hours since the printer was turned on.

Clean or Deep Clean the printhead to restore print quality.

A cleaning page prints.

  • Cleaning the printhead nozzles uses ink, so clean them only when necessary.
  • Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
  • If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead nozzles.
  • See the User's Guide for more information on how to clean the printhead nozzles.

Proxy Error

Try one or more of the following:

  • Touch Set Proxy to enter the proxy settings.
  • Touch OK to clear the message.

Troubleshooting 144

Page 145 of the Lexmark 91E user manual — SmartSolutions Update Failed
Page 145 · click to enlarge
Page 145

Replace Ink Cartridge

Try one or more of the following:

  • Replace the unrecognized ink cartridge with one that is supported by your printer.
  • If a Cartridge Finder widget has been downloaded to you printer, then touch Find Ink .
  • The Cartridge Finder solution available in the SmartSolutions menu appears.
  • Touch OK to clear the message.
  • See the User's Guide or visit the Lexmark Support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> for a list of supported ink cartridges.

Scanner ADF Cover Open

Try one or more of the following:

  • Close the ADF cover to clear the message.
  • Press to cancel the current scan job.

Scanner Disabled

Try one or more of the following:

  • Check the printer software settings or the Administration settings from the printer to enable the scanner.
  • Touch OK to clear the message.

Security Certificate Error

Try one or more of the following:

  • Touch Set Date to check the printer date, and then try to reconnect to the server.
  • Touch OK to clear the message.

Short Paper

Try one or more of the following:

  • Touch OK or press , depending on your printer model.
  • Make sure the paper size is correctly set.
  • Load paper with the correct size in the tray or on the paper support.
  • Check the paper guides, and then make sure the paper is properly loaded in the tray or on the paper support.
  • Cancel the current print job.

SmartSolutions Update Failed

Try one or more of the following:

  • Make sure your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
  • Make sure your printer is securely connected to the host computer, print server, or other network access point.

Troubleshooting 145

Page 146 of the Lexmark 91E user manual — Paper jam in the printer
Page 146 · click to enlarge
Page 146
  • Touch OK to clear the message.

Standard Network Software Error

Try one or more of the following:

  • Touch Continue to clear the message.
  • Turn the printer off and then back on to reset the printer.

Unable to Retrieve the Solution

Try one or more of the following:

  • Make sure your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
  • Make sure your printer is securely connected to the host computer, print server, or other network access point.
  • Touch OK to clear the message.

Unrecoverable Scan Error

Try one or more of the following:

  • Restart your printer.
  • Update your printer firmware. For more information, visit <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

USB Device Not Supported

Remove the unrecognized USB device and replace it with a supported device.

USB Hub Not Supported

Remove the unrecognized USB hub.

Clearing paper jams

  • “Paper jam in the printer” on page 146
  • “Paper jam in the exit tray” on page 149
  • “Paper jam in the duplex unit” on page 149
  • “Paper jam in the ADF (select models only)” on page 150
  • “Paper or specialty media misfeeds” on page 152

Paper jam in the printer

Troubleshooting 146

Page 147 of the Lexmark 91E user manual — Check the jam clearance area
Page 147 · click to enlarge
Page 147

Check the jam clearance area

1 Lift the scanner unit.

2 Remove the jam clearance cover.

Lexmark 91E — Check the jam clearance area diagram (page 147)
Fig. 109 · Check the jam clearance area
  • Squeeze the snap to lift the jam clearance cover.
  • Make sure that the printhead is moved to the side and away from the jammed paper.

3 Firmly grasp the paper on both sides, and then gently pull it out.

Lexmark 91E — Check the jam clearance area diagram (page 147)
Fig. 110 · Check the jam clearance area

Troubleshooting 147

Page 148 of the Lexmark 91E user manual — Check the paper tray
Page 148 · click to enlarge
Page 148

4 Reattach the jam clearance cover until it clicks into place.

Lexmark 91E — Standard Network Software Error diagram (page 148)
Fig. 111 · Standard Network Software Error
Lexmark 91E — Standard Network Software Error diagram (page 148)
Fig. 112 · Standard Network Software Error

5 Close the printer.

6 Touch OK or press , depending on your printer model.

Check the paper tray

  • For select models that support a second tray, make sure you also check the second tray.
  • If the paper tray was removed, then make sure you do not replace the tray until the jam is cleared.

1 Pull the tray completely out of the printer.

2 Firmly grasp the paper on both sides, and then gently pull it out.

Lexmark 91E — Check the paper tray diagram (page 148)
Fig. 113 · Check the paper tray

Troubleshooting 148

Page 149 of the Lexmark 91E user manual — LINE
Page 149 · click to enlarge
Page 149

3 Insert the tray.

4 Touch OK or press , depending on your printer model.

Paper jam in the exit tray

1 Firmly grasp the paper, and then gently pull it out.

Lexmark 91E — Paper jam in the exit tray diagram (page 149)
Fig. 114 · Paper jam in the exit tray

2 Touch OK or press , depending on your printer model.

Paper jam in the duplex unit

1 Push down the duplex latches, and then remove the duplex unit.

Lexmark 91E — Paper jam in the duplex unit diagram (page 149)
Fig. 115 · Paper jam in the duplex unit

LINE

EXT

Troubleshooting 149

Page 150 of the Lexmark 91E user manual — Check the ADF
Page 150 · click to enlarge
Page 150

2 Firmly grasp the paper, and then gently pull it out.

Lexmark 91E — Paper jam in the ADF (select models only) diagram (page 150)
Fig. 116 · Paper jam in the ADF (select models only)

LINE

EXT

3 Reinsert the duplex unit.

EXT

LINE

4 Touch OK or press , depending on your printer model.

Paper jam in the ADF (select models only)

Check the ADF

1 Press the ADF button, and then open the ADF cover.

Scenario 1 Scenario 2

Lexmark 91E — Check the ADF diagram (page 150)
Fig. 117 · Check the ADF
Lexmark 91E — Check the ADF diagram (page 150)
Fig. 118 · Check the ADF
Lexmark 91E — Check the ADF diagram (page 150)
Fig. 119 · Check the ADF

Troubleshooting 150

Page 151 of the Lexmark 91E user manual — Check under the ADF tray
Page 151 · click to enlarge
Page 151

2 Firmly grasp the paper on both sides, and then gently pull it out.

Scenario 1 Scenario 2

Lexmark 91E — Paper jam in the ADF (select models only) diagram (page 151)
Fig. 120 · Paper jam in the ADF (select models only)
Lexmark 91E — Paper jam in the ADF (select models only) diagram (page 151)
Fig. 121 · Paper jam in the ADF (select models only)

3 Close the ADF cover.

Lexmark 91E — Paper jam in the ADF (select models only) diagram (page 151)
Fig. 122 · Paper jam in the ADF (select models only)

4 Touch OK or press , depending on your printer model.

Check under the ADF tray

1 Remove the ADF tray.

Lexmark 91E — Check under the ADF tray diagram (page 151)
Fig. 123 · Check under the ADF tray
Lexmark 91E — Check under the ADF tray diagram (page 151)
Fig. 124 · Check under the ADF tray
Lexmark 91E — Check under the ADF tray diagram (page 151)
Fig. 125 · Check under the ADF tray

Troubleshooting 151

Page 152 of the Lexmark 91E user manual — R EMOVE EACH PAGE AS IT IS PRINTED
Page 152 · click to enlarge
Page 152

2 Firmly grasp the paper on both sides, and then gently pull it out.

Lexmark 91E — Paper or specialty media misfeeds diagram (page 152)
Fig. 126 · Paper or specialty media misfeeds
Lexmark 91E — Paper or specialty media misfeeds diagram (page 152)
Fig. 127 · Paper or specialty media misfeeds

3 Reattach the ADF tray until it snaps into place.

Lexmark 91E — Paper or specialty media misfeeds diagram (page 152)
Fig. 128 · Paper or specialty media misfeeds
Lexmark 91E — Paper or specialty media misfeeds diagram (page 152)
Fig. 129 · Paper or specialty media misfeeds

4 Touch OK or press , depending on your printer model.

Paper or specialty media misfeeds

These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together. Try one or more of the following:

C HECK PAPER CONDITION

Use only new, unwrinkled paper.

C HECK PAPER LOADING

  • Load a smaller amount of paper into the printer.
  • Load paper with the print side facedown. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
  • Check the loading instructions for your paper or specialty media.

R EMOVE EACH PAGE AS IT IS PRINTED

A DJUST THE PAPER GUIDES TO FIT THE LOADED PAPER

Troubleshooting 152

Page 153 of the Lexmark 91E user manual — S ELECT THE B ORDERLESS PRINT FEATURE
Page 153 · click to enlarge
Page 153

Print troubleshooting

  • “Poor quality at the edges of the page” on page 153
  • “Streaks or lines on printed image” on page 154
  • “Print speed is slow” on page 154
  • “Computer slows down when printing” on page 155

Poor quality at the edges of the page

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C HECK MINIMUM PRINT SETTINGS

Unless you are using the borderless feature, use these minimum print margin settings:

  • Left and right margins: – 6.35 mm (0.25 in.) for letter ‑ size paper – 3.37 mm (0.133 in.) for all paper sizes except letter
  • Top margin: 1.7 mm (0.067 in.)
  • Bottom margin: 12.7 mm (0.5 in.)

S ELECT THE B ORDERLESS PRINT FEATURE

1 With a photo open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Navigate to:

Paper/Finishing tab > select a borderless setting > OK

4 Click Print.

1 With a photo open, choose File > Page Setup.

2 From the “Format for” pop‑up menu, choose your printer.

3 From the Paper Size pop‑up menu, choose a paper size that has “(Borderless)” in its name.

For example, if you loaded a 4 x 6 photo paper, then choose US 4 x 6 in (Borderless).

4 Click OK.

5 From the menu bar, choose File > Print.

6 From the Printer pop‑up menu, choose your printer.

7 From the print options pop‑up menu, choose Quality & Media.

8 From the Paper Type pop‑up menu, choose a paper type.

Troubleshooting 153 · For Windows users · For Macintosh users

Page 154 of the Lexmark 91E user manual — A DD MEMORY TO THE COMPUTER
Page 154 · click to enlarge
Page 154

9 From the Print Quality pop‑up menu, choose Best or Photo.

10 Click Print.

Streaks or lines on printed image

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C HECK THE INK LEVELS

Replace low or empty ink cartridges.

S ELECT A HIGHER PRINT QUALITY FROM THE PRINTER SOFTWARE

M AKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED

A LIGN THE PRINTHEAD

C LEAN OR D EEP C LEAN THE PRINTHEAD NOZZLES

Print speed is slow

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

S ELECT A LOWER PRINT QUALITY FROM THE PRINTER SOFTWARE

MANUALLY SELECT A PAPER TYPE THAT MATCHES THE TYPE OF PAPER YOU ARE USING

R EMOVE AND REINSTALL THE PRINTER SOFTWARE

M AXIMIZE COMPUTER PROCESSING SPEED

  • Close all applications not in use.
  • Minimize the number and size of graphics and images in the document.

A DD MEMORY TO THE COMPUTER

Consider upgrading the RAM.

Troubleshooting 154

Page 155 of the Lexmark 91E user manual — S ET YOUR PRINTER AS THE DEFAULT PRINTER
Page 155 · click to enlarge
Page 155

Computer slows down when printing

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C HECK THE USB CONNECTION BETWEEN THE PRINTER AND COMPUTER

If your computer is connected to the printer through a USB cable, then try using a different USB cable.

R EFRESH YOUR NETWORK CONNECTIONS

1 If your computer is connected to an Ethernet or wireless network, then turn off the access point (wireless router) and turn it back on.

2 Wait one minute for the printer and computer to reestablish the connection.

C LOSE ALL APPLICATIONS NOT IN USE

Temporarily close unused applications or end processes that are taking too much memory from your computer.

C HECK YOUR COMPUTER PERFORMANCE

You may need to change how your computer manages resources and processes.

For more information on improving computer performance, see the documentation that came with your operating system.

Copy and scan troubleshooting

  • “Copier or scanner does not respond” on page 155
  • “Scanner unit does not close” on page 156
  • “Poor copy or scanned image quality” on page 156
  • “Partial copies or scans of documents or photos” on page 156
  • “Scan was not successful” on page 156
  • “Scanning takes too long or freezes the computer” on page 157
  • “Cannot scan to a computer over a network” on page 157

Copier or scanner does not respond

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

S ET YOUR PRINTER AS THE DEFAULT PRINTER

R EMOVE AND REINSTALL THE PRINTER SOFTWARE

Troubleshooting 155

Page 156 of the Lexmark 91E user manual — C HECK THE USB CONNECTION
Page 156 · click to enlarge
Page 156

Scanner unit does not close

1 Lift the scanner unit.

2 Remove any obstruction keeping the scanner unit open.

3 Lower the scanner unit.

Poor copy or scanned image quality

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C LEAN THE SCANNER GLASS

A DJUST THE SCAN QUALITY

REVIEW THE TIPS FOR COPYING, SCANNING, AND IMPROVING PRINT QUALITY

U SE A CLEARER VERSION OF THE ORIGINAL DOCUMENT OR IMAGE

MAKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE CORRECT

CORNER

Partial copies or scans of documents or photos

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

MAKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE

PLACEMENT CORNER

S ELECT A PAPER SIZE THAT MATCHES THE LOADED PAPER

MAKE SURE THE ORIGINAL SIZE SETTING MATCHES THE SIZE OF THE DOCUMENT YOU ARE SCANNING

Scan was not successful

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C HECK THE USB CONNECTION

1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2 Firmly plug the square end of the USB cable into the back of the printer.

Troubleshooting 156

Page 157 of the Lexmark 91E user manual — C HECK YOUR PROXY CONFIGURATION
Page 157 · click to enlarge
Page 157

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with .

R ESTART THE COMPUTER

Scanning takes too long or freezes the computer

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C LOSE OTHER SOFTWARE PROGRAMS THAT ARE NOT BEING USED

R ESTART THE COMPUTER

Cannot scan to a computer over a network

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

MAKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE CONNECTED TO THE SAME NETWORK

M AKE SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER

E-mail troubleshooting

  • “Cannot send e ‑ mail” on page 157
  • “Cannot attach files” on page 158

Cannot send e ‑ mail

C HECK YOUR E ‑ MAIL CONFIGURATION SETTINGS

Make sure you have correctly completed the e‑mail setup and successfully configured an SMTP server.

C HECK YOUR NETWORK CONNECTION

Make sure the printer is connected to an Ethernet or wireless network. Your network must be connected to the Internet for the printer to communicate with the SMTP server.

C HECK YOUR PROXY CONFIGURATION

Your proxy server configuration should allow SMTP server connections. For help with your proxy server or SMTP settings, contact your system support person.

Troubleshooting 157

Page 158 of the Lexmark 91E user manual — Connection checklist
Page 158 · click to enlarge
Page 158

M AKE SURE TO ENTER A VALID RECIPIENT E ‑ MAIL ADDRESS

M AKE SURE THE RECIPIENT MAILBOX IS NOT FULL

This causes e‑mail to bounce back to your inbox.

Cannot attach files

S ELECT A SUPPORTED FILE TYPE (JPEG OR PDF)

M AKE SURE THE FILE SIZE IS NOT TOO LARGE

Fax troubleshooting

  • “Fax troubleshooting checklist” on page 158
  • “Cannot send faxes” on page 159
  • “Cannot receive faxes” on page 160
  • “Cannot run the fax software” on page 161
  • “Fax error messages on the printer control panel” on page 161

For detailed descriptions of common terms and tasks, see the following:

  • “Setting up the printer to fax” on page 71
  • “Faxing FAQ” on page 88

Fax troubleshooting checklist

If you encounter problems sending and receiving faxes, then check the connection first:

1 Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port.

If you do not hear a dial tone, then contact your line provider.

2 While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the port of the printer.

If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.

If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.

Connection checklist

  • Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according to your setup scenario.
  • Make sure that the cables are connected to the correct ports.
  • Make sure that the cables are securely plugged in.

Troubleshooting 158

Page 159 of the Lexmark 91E user manual — E NABLE AUTOMATIC FAX CONVERSION
Page 159 · click to enlarge
Page 159

Check the cable connections for the following hardware, if applicable:

Power supply Answering machine Cable modem Splitter

Telephone VoIP adapter DSL filter RJ‑11 adapter

  • If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for the printer.
  • If the printer is connected to a VoIP adapter or cable modem, then make sure that the printer is plugged into the first phone port.
  • If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter.

Cannot send faxes

If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:

M AKE SURE TO ENTER YOUR USER INFORMATION IN THE PRINTER

If you did not enter your user information during initial setup, then enter your fax name and fax number. This is the information that identifies you as the sender in all the faxes that you send. Some countries or regions require the fax number and fax name for you to send a fax, and some fax machines block anonymous faxes.

R EDUCE THE TRANSMISSION SPEED OF THE FAX MODEM

The modem of the printer can send and receive data up to at 33,600 bps. However, it is not necessary to set the modem to its fastest transmission capability. The speed of the modem of the receiving fax machine must match or be greater than the speed at which you are sending your fax. Otherwise, your fax will not be received.

1 From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Max Send Speed

2 Select a sending speed, and then touch Accept.

E NABLE ERROR CORRECTION

Errors and blurs may appear in the faxed document if there is too much noise on the line. This feature enables the printer to transmit the bad blocks of data again and correct the errors. When a fax has too many errors, the fax may be rejected by the receiving fax machine.

From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Error Correction > On > Accept

E NABLE AUTOMATIC FAX CONVERSION

If the receiving fax machine does not support color fax, then this option automatically converts the outgoing color fax to black and white. It also automatically reduces the resolution of the fax to a resolution that the receiving machine can support.

From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Auto Fax Convert > On > Accept

Troubleshooting 159

Page 160 of the Lexmark 91E user manual — I NCREASE THE RINGER VOLUME
Page 160 · click to enlarge
Page 160

M AKE SURE THAT THE D IAL P REFIX SETTING IS CORRECT

The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or telephone number. If the printer is in an office setting or in a private branch exchange, then this can be a specific number that you need to press so you can make a call outside the office.

1 From the home screen, navigate to:

> Fax Setup > Dialing and Sending > Dial Prefix

2 Check the prefix.

If the prefix is not correct, then enter the correct prefix, and then touch Accept.

Cannot receive faxes

If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:

MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP

If the printer is sharing the line with other devices, then make sure that the following are set:

  • Auto Answer is on.
  • The printer picks up on a greater number of rings than the other devices.
  • The printer picks up on the correct distinctive ring, if you subscribe to a distinctive ring service.

M AKE SURE THAT THE PRINTER IS CONNECTED TO AN ANALOG PORT

The printer is an analog device. If you are using a PBX system, then make sure that the printer is connected to an analog port on the PBX. You may need a digital line converter that converts digital signals into analog signals.

M AKE SURE TO FREE UP PRINTER MEMORY

The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it later. However, if the printer memory is full, then the printer may not be able to receive more incoming faxes. An error message appears on the touch screen when the printer memory is full. Resolve the error to free up space in the printer memory.

M AKE SURE THAT F AX F ORWARDING IS DISABLED

From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Fax Forward > Off > Accept

I NCREASE THE RINGER VOLUME

If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume.

Troubleshooting 160

Page 161 of the Lexmark 91E user manual — Fax error messages on the printer control panel
Page 161 · click to enlarge
Page 161

M AKE SURE THAT YOU HAVE THE CORRECT MANUAL ANSWER CODE

If you set the printer to receive faxes manually (Auto Answer Off), then you need to enter the correct code when a fax comes in so that the printer can receive it.

1 From the home screen, navigate to:

> Fax Setup > Ringing and Answering > Manual Answer Code

2 Copy the manual answer code that appears on the touch screen.

Cannot run the fax software

The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in the fax software.

M AKE SURE A FAX DRIVER IS INSTALLED

The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD.

M AKE SURE THE PRINTER IS CONNECTED TO A TELEPHONE LINE

You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a VoIP adapter, or a cable modem) before you can open the fax software and configure the fax settings.

Fax error messages on the printer control panel

Error MessageWhat it indicates: Possible solutions:

Remote Fax Error The receiving fax machine cannot receive the fax. The error on the receiving end could be due to several factors.

  • Resend the fax. There may have been a problem with the quality of the connection.
  • Decrease the transmission speed of your fax modem.
  • Register your user information. In some countries, you cannot send a fax without registering your fax name and fax number. Some fax machines also block faxes without sender information.

Fax Mode Unsupported The receiving fax machine does not support color fax or the scan resolution of the document that you are sending.

  • Enable Auto Fax Conversion. The printer automatically converts color faxes to black and lowers the scan resolution of the document.
  • Lower the fax quality.
  • Reformat the document on Letter ‑ size paper.

Troubleshooting 161

Page 162 of the Lexmark 91E user manual — Make sure that you have the correct manual answer code
Page 162 · click to enlarge
Page 162
Error MessageWhat it indicates: Possible solutions:

Unsupported Compression The fax modem of the receiving fax machine does not support data compression. Fax modems compress data to speed up transmission, but the receiving fax modem needs to have the same compression code.

  • Lower the transmission speed of the fax modem, and then resend the fax.
  • Enable Auto Fax Conversion.

Unsupported Resolution The receiving fax machine does not support the scan resolution of the document that you are sending.

  • Lower the fax quality.
  • Enable Auto Fax Conversion.

Unrecoverable Fax Error The fax modem encountered critical errors.

Turn off the printer, turn it back on, and then resend the fax.

Fax Modem Error The fax modem of the printer may be busy, or the fax modem may have encountered problems during transmission.

Turn off the printer, turn it back on, and then resend the fax.

Phone Line is connected to the incorrect jack on the back of the machine.

The telephone cable is connected to the wrong port on the back of the printer.

Connect the phone cable to the port on the back of the printer.

Digital line detected The printer is connected to a digital line.

The printer is an analog device and must be connected to an analog line. To connect the printer to a digital line, you must use a digital line converter or a filter.

For more information, see the ”Setting up the printer to fax” section.

The printer cannot detect a dial tone. See the “Fax troubleshooting checklist.”

Phone Line Not Connected

Phone Line Busy Your telephone line or the telephone line of the receiving fax machine is busy. This happens especially if the printer is sharing the line with other devices (telephone, answering machine).

  • Set the printer to redial.
  • Increase the time between the redial attempts.
  • Place a test call to the number to which you want to send a fax to make sure that it is working correctly.
  • If the telephone line is being used by another device, then wait until the other device is finished before sending the fax.
  • Schedule to resend the fax at a later time.
  • Set the printer to scan before dialing. The scanned document is saved in the printer memory. The printer can then retrieve it and automatically redial the number.

Troubleshooting 162 · Failed to Connect · Phone Line Error

Page 163 of the Lexmark 91E user manual — Network troubleshooting
Page 163 · click to enlarge
Page 163
Error MessageWhat it indicates: Possible solutions:

No Answer Auto Answer may have been turned off on the receiving fax machine.

  • Verify the number, and then resend the fax.
  • Set the printer to redial.

Disable Block No‑ID.

Your printer stopped the call because the incoming fax has no sender information. You may have chosen to block faxes with no Caller ID or faxes without Caller IDs are not allowed in your country or region.

To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.

Memory card troubleshooting

  • “Memory card troubleshooting checklist” on page 163
  • “Nothing happens when a memory card is inserted” on page 163

Memory card troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most memory card problems:

  • Make sure that the memory card you are using can be used in the printer.
  • Make sure the memory card is not damaged.
  • Make sure memory card contains supported file types.

Nothing happens when a memory card is inserted

If the "Memory card troubleshooting checklist" does not solve the problem, then try the following:

R EINSERT THE MEMORY CARD

The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.

Network troubleshooting

  • “Network troubleshooting checklist” on page 164
  • “The Continue button is unavailable” on page 165
  • “Computer firewall is blocking communication with the printer” on page 166
  • “Communication with printer lost when connected to Virtual Private Network (VPN)” on page 166

Troubleshooting 163 · No Caller ID · Call Stopped

Page 164 of the Lexmark 91E user manual — Wireless Networking
Page 164 · click to enlarge
Page 164

Network troubleshooting checklist

Before beginning to troubleshoot the wireless printer, verify the following:

General Networking

Make sure:

  • The printer, the computer, and the access point (wireless router) are all plugged in and turned on.
  • The wireless network is working properly.
  • Try accessing other computers on your wireless network. If your network has Internet access, try connecting to the Internet over a wireless connection.
  • The printer driver is installed on the computer from which you are performing a task.
  • The correct printer port is selected.
  • The IP address, gateway, and network mask are correct for your network.

Print a network setup page from the printer to check the network settings. • All switches, hubs, and other connecting devices are turned on.

Ethernet Networking

Make sure:

  • The Ethernet cable and connectors are not damaged.

Check the connectors at both ends for any obvious damage. If possible, use a new cable. • The Ethernet cable is firmly plugged in to the printer and to the network hub or wall connection.

Wireless Networking

Make sure:

  • The SSID is correct.

Print a network setup page from the printer to check the network settings. • Your wireless security settings are correct.

Log in to the access point and check the security settings.

  • If you are not sure if your security information is correct, run the wireless setup again.
  • The printer and the computer are within the range of the wireless network.
  • The computer and printer are both connected to the same wireless network.
  • The printer is located away from obstacles or electronic devices that could interfere with the wireless signal.

Make sure the printer and wireless access point are not separated by poles, walls, or support columns containing metal or concrete.

  • Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices.
  • The computer is not connected to a VPN.
  • Your computer firewall is updated to the most recent version and allows the printer software to communicate over the network.

Troubleshooting 164

Page 165 of the Lexmark 91E user manual — R ECONNECT THE PRINTER POWER SUPPLY
Page 165 · click to enlarge
Page 165

The Continue button is unavailable

Try the following solutions in the order they appear until the Continue button becomes active and available:

CHECK IF THE USB CABLE IS SECURELY PLUGGED INTO THE USB PORTS ON BOTH THE COMPUTER AND THE

PRINTER

USB ports are marked with .

M AKE SURE THE PRINTER IS PLUGGED IN AND TURNED ON

Make sure the button is lit. If you have just turned on the printer, then you might need to disconnect the USB cable and then reconnect it.

M AKE SURE THE USB PORT ON THE COMPUTER IS WORKING

Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then the port is working.

  • Your port may be working fine, but certain conflicts can occur with multiple USB devices. Try disconnecting one of your other USB devices.
  • If the USB port on the computer is not working, then try using the other USB ports on the computer.

M AKE SURE THE USB CABLE IS WORKING

Try using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.

MAKE SURE YOU ARE USING THE CORRECT CD FOR YOUR PRINTER MODEL

Compare the printer model on the CD to the printer model on the printer. The numbers should either match exactly or be within the same series.

If unsure, look for an updated version of the printer software on the Lexmark Web site. For more information, see the printer User's Guide.

R ECONNECT THE PRINTER POWER SUPPLY

1 Turn off the printer.

2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.

3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.

4 Turn on the printer.

Troubleshooting 165

Page 166 of the Lexmark 91E user manual — Communication with printer lost when connected to Virtual Private Network (VPN)
Page 166 · click to enlarge
Page 166

R UN THE INSTALLER AGAIN

1 Close the installer.

2 Remove the CD, and then restart the computer.

3 Insert the CD, and then run the installer again.

MAKE SURE YOUR COMPUTER IS ABLE TO ACKNOWLEDGE USB ACTIVITY ON THE USB PORT

Open the Device Manager to check if it has activity whenever a USB device is connected to a USB port:

, or click Start and then click Run.

2 In the Start Search or Run box, type devmgmt.msc.

3 Press Enter, or click OK.

4 Watch the Device Manager window while connecting a USB cable or another device to the USB port. The window refreshes when the Device Manager recognizes the USB connection.

  • If there is activity on the Device Manager but none of the previous solutions worked, then call customer support.
  • If there is no activity on the Device Manager, then there may be a problem with your computer and its USB support. The computer must recognize the USB connection in order for installation to work.

Computer firewall is blocking communication with the printer

Firewall settings may have stopped the printer from connecting to your computer.

If a firewall is installed on your computer, then do one of the following:

  • Turn off your computer firewall.
  • Update your computer firewall to the most recent version, and then allow the printer software to communicate over the network.

For more information on turning off and updating the firewall, see the help pages of your operating system.

Communication with printer lost when connected to Virtual Private Network (VPN)

You will lose your connection to a wireless printer on your local network when connected to most Virtual Private Networks (VPNs).

Most Virtual Private Networks allow computers to communicate with only the VPN and no other network at the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless setup on the computer.

To check if the computer is currently connected to a VPN, open your VPN Client software, and then check your VPN connections. If you do not have a VPN Client software installed, then check the connections manually using the Windows VPN Client.

If you would like to have the ability to connect to your local network and to a VPN at the same time, then request the system support person for the VPN to allow split tunneling. Be aware that some organizations will not allow split tunneling due to security or technical concerns.

Troubleshooting 166 · 1 Click

Page 167 of the Lexmark 91E user manual — C HECK YOUR WEP KEY OR WPA PASSPHRASE
Page 167 · click to enlarge
Page 167

If you want to connect only to a VPN, then the documents you want to print will not be printed until you have ended the VPN session. If you want to continue printing while connected to a VPN, then connect the printer to the computer using a USB cable. For more information, see the User’s Guide.

Wireless troubleshooting

  • “Resetting the wireless settings to factory defaults” on page 167
  • “Cannot print over wireless network” on page 167
  • “Wireless print server not installed” on page 170
  • “'Communication not available' message displays when printing wirelessly” on page 170
  • “Resolving intermittent wireless communications issues” on page 172

Resetting the wireless settings to factory defaults

From the home screen, navigate to:

> Network Setup > Reset Network Settings > Yes

To verify, print a network setup page, and then check the wireless settings.

Cannot print over wireless network

If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then you can try uninstalling and reinstalling the software.

Before you reinstall the software, check the troubleshooting checklist, and then do the following:

TURN THE ACCESS POINT (WIRELESS ROUTER) OFF AND THEN BACK ON

Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network connections and resolve connectivity issues.

D ISCONNECT FROM VPN SESSION

When you are connected to another network through a VPN connection, you will not be able to access the printer over your wireless network. End your VPN session and try printing again.

M AKE SURE D EMO M ODE IS TURNED OFF

Select printer features are not available when Demo Mode is turned on.

From the home screen, navigate to:

> Demo Mode > Off > save the setting

C HECK YOUR WEP KEY OR WPA PASSPHRASE

If your access point is using WEP security, then the WEP key should be:

  • Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WEP key are case‑sensitive.

Troubleshooting 167

Page 168 of the Lexmark 91E user manual — M AKE SURE YOUR COMPUTER IS CONNECTED TO YOUR ACCESS POINT
Page 168 · click to enlarge
Page 168

If your access point is using WPA or WPA2 security, then the WPA passphrase should be:

  • Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

or • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA passphrase are case‑sensitive.

C HECK IF YOUR ACCESS POINT HAS AN ASSOCIATION / REGISTRATION BUTTON

Wireless broadband boxes in Europe, the Middle East, and Africa such as LiveBox, AliceBox, N9UF Box, FreeBox, or Club Internet may require you to press an association/registration button when adding the printer to your wireless network.

If you are using one of these boxes and need more information, then see the documentation that came with your box, or contact your Internet Service Provider (ISP).

M OVE YOUR ACCESS POINT AWAY FROM OTHER ELECTRONIC DEVICES

There may be temporary interference from electronic devices such as microwave ovens or other appliances, cordless phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to these devices.

MOVE THE COMPUTER AND/OR PRINTER CLOSER TO THE ACCESS POINT

The range of your wireless network depends on many factors, including the abilities of your access point and network adapters. If you are having trouble printing, then try placing the computer and printer no more than 100 feet apart.

C HECK THE WIRELESS SIGNAL QUALITY

Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another factor is causing the problem.

C HECK YOUR ADVANCED SECURITY SETTINGS

  • If you are using MAC (Media Access Control) address filtering to limit access to your wireless network, then you must add the printer MAC address to the list of addresses allowed to connect to the access point.
  • If you set the access point to issue a limited number of IP addresses, then you must change this so that the printer can be added.

M AKE SURE YOUR COMPUTER IS CONNECTED TO YOUR ACCESS POINT

  • See if you have access to the Internet by opening your Web browser and accessing any site.
  • If there are other computers or resources on your wireless network, then check to see if you can access them from your computer.

MAKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS NETWORK

If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.

Troubleshooting 168

Page 169 of the Lexmark 91E user manual — Wireless troubleshooting
Page 169 · click to enlarge
Page 169

1 Obtain the SSID of the network that the computer is connected to. a Type the IP address of your access point into the address field of your Web browser.

If you do not know the IP address of the access point:

  • , or click Start and then click Run . 2 In the Start Search or Run box, type cmd . 3 Press Enter or click OK . 4 Type ipconfig , and then press Enter . Check the Wireless Network Connection section:
  • The “Default Gateway” entry is typically the access point .
  • The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134. b Type the user name and password of the access point when prompted.

c Click OK. d In the Wireless settings section, look for the SSID. e Write down the SSID.

2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID.

3 Compare the SSID of the computer and SSID of the printer.

If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.

If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.

For Macintosh users with an AirPort base station

In Mac OS X version 10.5 or later

1 From the Apple menu, navigate to:

System Preferences > Network > AirPort

The SSID of the network that the computer is connected to is displayed in the Network Name menu.

2 Write down the SSID.

In Mac OS X version 10.4 or earlier

1 From the Finder, navigate to:

Applications > Internet Connect > AirPort

The SSID of the network that the computer is connected to is displayed in the Network menu.

2 Write down the SSID.

For Macintosh users with an access point

1 Type the IP address of the access point in the address field of your Web browser, and then continue to step 2.

Troubleshooting 169 · For Windows users · 1 Click

Page 170 of the Lexmark 91E user manual — “Communication not available” message displays when printing wirelessly
Page 170 · click to enlarge
Page 170

If you do not know the IP address of the access point, then do the following:

a From the Apple menu, navigate to:

System Preferences > Network > AirPort b Click Advanced or Configure.

c Click TCP/IP. The Router entry is typically the access point.

2 Type your user name and password when prompted, and then click OK.

3 In the Wireless settings section, look for the SSID.

4 Write down the SSID, security type, and the WEP key/WPA passphrase (if shown).

  • Make sure you copy the network information down exactly, including any capital letters.
  • Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

MAKE SURE YOUR OS IS COMPATIBLE WITH WIRELESS PRINTING THROUGH AIRPORT

The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or later.

Wireless print server not installed

You may see a message during installation indicating that the printer does not have a wireless print server installed. If you are sure the printer is capable of wireless printing, try the following:

C HECK POWER

Make sure the light is on.

“Communication not available” message displays when printing wirelessly

Try one or more of the following:

MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK

If you are using a laptop and have power saving settings enabled, then you may see the ”Communication not available” message on your computer screen when you attempt to print wirelessly. This can occur if the laptop hard drive has powered down.

If you see this message, then wait a few seconds and then try to print again. The laptop and printer require a few seconds to power up again and reattach to the wireless network.

If you see this message again after you have waited long enough for the printer and the laptop to attach to the network, then there may be a problem with your wireless network.

Make sure that the laptop and printer have both received IP addresses:

, or click Start and then click Run.

2 In the Start Search or Run box, type cmd.

Troubleshooting 170 · For Windows users · 1 Click

Page 171 of the Lexmark 91E user manual — M AKE SURE THE WIRELESS PORT IS SELECTED
Page 171 · click to enlarge
Page 171

3 Press Enter, or click OK.

4 Type ipconfig, and then press Enter.

The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.

1 From the Apple menu, navigate to:

About This Mac > More Info

2 From the Contents pane, choose Network.

3 If you are connected over a wireless network, choose AirPort from the Active Services list.

The Router entry is typically the access point.

Locating the printer IP address

  • From the printer, print a network setup page.

In the TCP/IP section, look for Address. • View the printer settings. 1 From the printer control panel, navigate to:

> Network Setup > TCP/IP > IPv4 2 Look for IP Address.

If the printer and/or the laptop does not have an IP address, or if either has an address of 169.254.x.y (where x and y are any two numbers between 0 and 255):

1 Turn off the device that does not have a valid IP address (the laptop, the printer, or both).

2 Turn on the device(s), and then check the IP addresses again.

If the laptop and/or printer still does not receive a valid IP address, then there is a problem with your wireless network. Try the following:

  • Make sure your access point (wireless router) is turned on and is working.
  • Remove any objects that could be blocking the signal.
  • Temporarily turn off any unnecessary wireless devices on your network and pause any network ‑ intensive activities, like large file transfers or network games. If the network is too busy, then it is possible that the printer is not receiving the IP address within the allowed time.
  • Make sure your DHCP server, which may also be your wireless router, is working and is configured to assign IP addresses. If you are not sure how to do this, then refer to the manual that came with your wireless router.

If the printer and computer have valid IP addresses and the network is operating correctly, then continue troubleshooting.

M AKE SURE THE WIRELESS PORT IS SELECTED

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

4 Right‑click the printer, and then select Properties or Printer properties from the menu.

Troubleshooting 171 · For Macintosh users · 1 Click

Page 172 of the Lexmark 91E user manual — Resolving intermittent wireless communications issues
Page 172 · click to enlarge
Page 172

5 Click the Ports tab.

6 Locate the selected port. The selected port has a check beside it in the Port column.

7 If the Description column of the selected port indicates that it is a USB port, then scroll through the list and select the port with Printer Port in the Description column. Check the printer model in the Printer column to make sure you select the right printer port.

8 Click OK, and then try to print again.

M AKE SURE BIDIRECTIONAL COMMUNICATION IS ENABLED

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

4 Right‑click the printer, and then select Properties or Printer properties from the menu.

5 Click the Ports tab.

6 Click the box next to Enable bidirectional support if it is not already checked.

7 Click Apply > OK, and then try to print again.

Resolving intermittent wireless communications issues

You may notice that your printer works for a short time and then stops working, although apparently nothing has changed on your wireless network.

Many different issues can interrupt network communications, and sometimes more than one problem exists at the same time. Try one or more of the following:

DISCONNECT FROM ALL VPNS WHEN ATTEMPTING TO USE THE WIRELESS NETWORK

Most Virtual Private Networks (VPNs) allow computers to communicate with only the VPN and no other network at the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless setup on the computer.

To check if the computer is currently connected to a VPN, open your VPN Client software and check your VPN connections. If you do not have a VPN Client software installed, then check the connections manually using the Windows VPN Client.

If you would like to have the ability to connect to your local network and to a VPN at the same time, then request the system support person for the VPN to allow split tunneling. Be aware that some organizations will not allow split tunneling due to security or technical concerns.

TURN OFF THE ACCESS POINT (WIRELESS ROUTER) AND TURN IT BACK ON

Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network connections and resolve connectivity issues.

Troubleshooting 172 · 1 Click

Page 173 of the Lexmark 91E user manual — A SSIGN STATIC IP ADDRESSES TO ALL DEVICES IN THE NETWORK
Page 173 · click to enlarge
Page 173

E LIMINATE NETWORK CONGESTION

If a wireless network is too busy, then the computer and printer may have difficulty communicating with each other. Some causes of wireless network congestion can include:

  • Transferring large files across the network
  • Networked games
  • Peer ‑ to ‑ peer file swapping applications
  • Streaming video
  • Too many computers on the wireless network at once

E LIMINATE SOURCES OF INTERFERENCE

Common household items can potentially disrupt wireless network communications. Cordless phones (but not cellular phones), microwave ovens, baby monitors, almost any kitchen appliance, wireless surveillance equipment, nearby wireless networks, and any appliance containing a motor can disrupt wireless network communications.

Try turning on any potential sources of interference and see if it causes the problem. If it does, then separate your wireless network from the device.

C HANGE THE CHANNEL THE ACCESS POINT USES

You can sometimes eliminate interference from unknown sources by changing the channel your access point uses to broadcast. There are three distinct channels on a router. See the documentation that came with your router to determine which three apply. Other channels are offered as options, but these overlap. If the router is configured to use the default settings, then change the channel setting to use a different distinct channel. If you are not sure how to change the channel, then see the documentation that came with your access point.

C ONFIGURE THE ACCESS POINT WITH A UNIQUE SSID

Many wireless networks use the SSID that the router was originally configured by the manufacturer to use. Using the default SSID can cause problems when more than one network is operating in the same area with the same SSID. The printer or computer may attempt to attach to the wrong network, although it will appear to be trying to connect to the correct network.

To avoid this type of interference, change the SSID on your access point from the default. If you are not sure how to change the SSID, then see the documentation that came with your access point.

A SSIGN STATIC IP ADDRESSES TO ALL DEVICES IN THE NETWORK

Most wireless networks use a DHCP server (Dynamic Host Configuration Protocol) built in to the wireless router to assign IP addresses to clients on the wireless network. DHCP addresses are assigned when they are needed, as when a new device is added to the wireless network or when it is powered on. Wireless devices must send a request to the router, and receive an IP address in response so they can function on the network. Because the wireless router performs many other tasks besides assigning addresses, it sometimes does not respond quickly enough with an address. The requesting device sometimes gives up before it receives an address.

Try assigning static IP addresses to the devices in your network to resolve this issue.

Troubleshooting 173

Page 174 of the Lexmark 91E user manual — P URCHASE A NEW ROUTER
Page 174 · click to enlarge
Page 174

To assign a static IP address to the printer:

1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network.

2 Print a network setup page to see what IP address is currently assigned to the printer.

3 Open a Web browser and then type the printer IP address in the address field. Press Enter.

4 Click Configuration > TCP/IP > Set static IP address.

5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.

Confirm that the IP address is updated by typing the static IP address in the browser address field and checking to see if the printer Web page reloads. For more information on assigning static IP addresses, see the documentation that came with your router and operating system.

C HECK FOR KNOWN ISSUES WITH THE ACCESS POINT

Some wireless routers have documented defects that were identified and resolved by the manufacturers. Visit the company Web site of the router manufacturer. Check for firmware updates and other advice from the manufacturer. See the documentation that came with your wireless router if you are not sure how to reach the manufacturer Web site.

C HECK FOR WIRELESS NETWORK ADAPTER UPDATES

If you are having trouble printing from one particular computer, then check the Web site of the manufacturer of the wireless network adapter card in that computer. It is possible that there is an updated driver available that could resolve the issue.

C HANGE ALL NETWORK DEVICES TO THE SAME TYPE

While it is possible to successfully mix 802.11b, 802.11g, and 802.11n devices on the same wireless network, the faster devices will sometimes prevent the slower devices from communicating.

Try turning on only the network devices of the same type and see if network communications improve. If this solves the problem, then you may want to upgrade your older devices with newer wireless network adapters.

P URCHASE A NEW ROUTER

If your router is several years old, then it may not be fully compatible with the newer wireless devices on your network. Consider purchasing a newer router that is fully compliant with the 802.11 IEEE specifications.

Troubleshooting 174

Page 175 of the Lexmark 91E user manual — 901, 90E, 91E
Page 175 · click to enlarge
Page 175

Notices

Product information

Product name:

Machine type:

Model(s):

901, 90E, 91E

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

If you don't have access to the Internet, you can contact Lexmark by mail:

Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA

2011 Lexmark International, Inc.

All rights reserved.

Lexmark Pro910 Series · December 2011

Page 176 of the Lexmark 91E user manual — Federal Communications Commission (FCC) compliance information statement
Page 176 · click to enlarge
Page 176

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Trademarks

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PCL® is a registered trademark of the Hewlett-Packard Company.

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.
Page 177 of the Lexmark 91E user manual — Noise emission levels
Page 177 · click to enlarge
Page 177

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Modular component notice

This product may contain the following modular component(s):

Lexmark regulatory type/model LEX-M03-002; FCC ID: US:2G2CN00BM03002; Industry Canada IC:2376A-M03002

Lexmark regulatory type/model LEX-M01-004; FCC ID: IYLM01004; Industry Canada IC:2376A-M01004

Licensing notices

All licensing notices associated with this product can be viewed from the CD:\LEGAL directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Show 4 more labels / short text on this page
Printing 52 dBA · Scanning 47 dBA · Copying 52 dBA · Ready 16 dBA
Page 178 of the Lexmark 91E user manual — Static sensitivity notice
Page 178 · click to enlarge
Page 178

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Battery notice

This product contains Perchlorate material. Special handling may apply. For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

Page 179 of the Lexmark 91E user manual — Sleep Mode
Page 179 · click to enlarge
Page 179

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature 15 to 32°C (60 to 90°F)

Shipping and storage temperature -40 to 60°C (-40 to 140°F), 1 to 60°C (34 to 140°F)

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 32

Copy The product is generating hard‑copy output from hard‑copy original documents. 21

Scan The product is scanning hard‑copy documents. 15

Ready The product is waiting for a print job. 11.5

Sleep Mode The product is in a high‑level energy‑saving mode. 6

Off The product is plugged into a wall outlet, but the power switch is turned off. 0.4

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 60

Page 180 of the Lexmark 91E user manual — Notice to users of the US telephone network: FCC requirements
Page 180 · click to enlarge
Page 180

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Notice to users of the US telephone network: FCC requirements

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is

Page 181 of the Lexmark 91E user manual — Notice to users of the Canadian telephone network
Page 181 · click to enlarge
Page 181

provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

Notice to users of the Canadian telephone network

This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.

Page 182 of the Lexmark 91E user manual — Notice to users of the New Zealand telephone network
Page 182 · click to enlarge
Page 182

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

This equipment uses CA11A telephone jacks.

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.

Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.

This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:

  • There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
  • The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
  • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.
Page 183 of the Lexmark 91E user manual — Notice to Users in the European Union
Page 183 · click to enlarge
Page 183

South Africa telecommunications notice

This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.

Uso del prodotto in Svizzera

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109 o 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.

Notice to Users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

Refer to the table at the end of the Notices section for further compliance information.

Page 184 of the Lexmark 91E user manual — Industry Canada (Canada)
Page 184 · click to enlarge
Page 184

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Page 185 of the Lexmark 91E user manual — RO SE SI SK TR UK
Page 185 · click to enlarge
Page 185

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2005/32/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-using products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2005/32/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Page 186 of the Lexmark 91E user manual — Notice to users in the European Union
Page 186 · click to enlarge
Page 186

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Page 187 of the Lexmark 91E user manual — Limited warranty service
Page 187 · click to enlarge
Page 187

Statement of Limited Warranty

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Lexmark Pro910 Series

Page 188 of the Lexmark 91E user manual — Additional rights
Page 188 · click to enlarge
Page 188

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Page 189 of the Lexmark 91E user manual — LEXMARK SOFTWARE LICENSE AGREEMENT
Page 189 · click to enlarge
Page 189

LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.

LEXMARK SOFTWARE LICENSE AGREEMENT

This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.

This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.

The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.

IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA

Page 190 of the Lexmark 91E user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 190 · click to enlarge
Page 190

OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this License Agreement:

a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,

executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or

installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License Agreement. d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the

Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so shall be void. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program.

Page 191 of the Lexmark 91E user manual — MICROSOFT CORPORATION NOTICES
Page 191 · click to enlarge
Page 191

9 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this License Agreement (except to the extent such extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.

MICROSOFT CORPORATION NOTICES

1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.com/fwlink/?LinkId=52369.

Page 192 of the Lexmark 91E user manual — ADOBE SYSTEMS INCORPORATED NOTICE
Page 192 · click to enlarge
Page 192

2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fwlink/?LinkId=83288.

ADOBE SYSTEMS INCORPORATED NOTICE

Contains Flash®, Flash® Lite™ and/or Reader® technology by Adobe Systems Incorporated

This Product contains Adobe® Flash® player software under license from Adobe Systems Incorporated, Copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe, Reader and Flash are trademarks of Adobe Systems Incorporated.

Page 194 of the Lexmark 91E user manual — Table of contents
Page 194 · click to enlarge
Page 194

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 195 of the Lexmark 91E user manual — Table of contents
Page 195 · click to enlarge
Page 195

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 196 of the Lexmark 91E user manual — Table of contents
Page 196 · click to enlarge
Page 196

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 197 of the Lexmark 91E user manual — Table of contents
Page 197 · click to enlarge
Page 197

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 198 of the Lexmark 91E user manual — Table of contents
Page 198 · click to enlarge
Page 198

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 199 of the Lexmark 91E user manual — Table of contents
Page 199 · click to enlarge
Page 199

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Page 200 of the Lexmark 91E user manual — Table of contents
Page 200 · click to enlarge
Page 200

Table of contents

Contentsp.2Safety informationp.6About your printerp.7Thank you for choosing this printer!p.7Minimizing your printer's environmental impactp.7Finding information about the printerp.8Understanding the parts of the printerp.10Ordering and replacing suppliesp.13Ordering ink cartridgesp.13Using genuine Lexmark ink cartridgesp.14Replacing ink cartridgesp.14Ordering paper and other suppliesp.15Recycling Lexmark productsp.16Using the printer control panel buttons and menusp.17Using the printer control panelp.17Understanding the home screenp.18Navigating menus using the touch screenp.19Changing the Sleep timeoutp.20Saving paper and energyp.21Restoring factory default settingsp.21Using the printer softwarep.22Minimum system requirementsp.22Using the Windows printer softwarep.22Using the Macintosh printer softwarep.24Finding and installing optional softwarep.25Updating the printer softwarep.26Downloading PCL and PS drivers (Windows only)p.26Reinstalling the printer softwarep.26Uninstalling the printer softwarep.26Installing the printer softwarep.27Loading paper and original documentsp.28Loading the paper trayp.28Loading envelopes or photo paperp.30Loading various paper typesp.33Saving paper settingsp.36Loading original documents on the scanner glassp.36Loading original documents into the ADFp.37Linking traysp.37Printingp.38Tips for printingp.38Printing basic documentsp.38Printing a documentp.38Collating printed copiesp.39Changing the print order of pagesp.39Printing multiple pages on one sheetp.40Printing documents from a memory card or flash drivep.41Printing specialty documentsp.41Printing envelopesp.41Printing on labelsp.42Printing on custom-size paperp.43Working with photosp.44Using a memory card or flash drive with the printerp.44Supported memory cards and file typesp.45Printing photos using the printer control panelp.45Printing photos from a PictBridge-enabled digital camerap.46Printing on both sides of the paper (duplexing)p.47Printing on both sides of the paper (duplexing) automaticallyp.47Setting the duplex printing dry timep.48Managing print jobsp.49Finding the print queue for your printerp.49Setting your printer as the default printerp.50Changing the default printing modep.51Pausing print jobsp.51Resuming print jobsp.52Canceling print jobsp.52Printing from a mobile devicep.53What is LexPrint?p.53Supported printersp.53Copyingp.54Tips for copyingp.54Making copiesp.54Copying an ID cardp.55Enlarging or reducing imagesp.55Adjusting copy qualityp.55Making a copy lighter or darkerp.55Collating copies using the printer control panelp.56Placing separator sheets between copiesp.56Copying multiple pages on one sheetp.56Placing an overlay message on each pagep.57Removing the background of a copyp.57Making a duplex copyp.57Making a two-sided (duplex) copy automaticallyp.57Making a duplex copy manuallyp.58Canceling copy jobsp.58Scanningp.59Tips for scanningp.59Scanning to a local computerp.59Scanning to a network computerp.60Scanning to a flash drive or memory cardp.60Scanning photos for editingp.61Scanning documents for editingp.62Scanning directly to e-mail using the printer softwarep.63Scanning to a PDFp.63Scanning FAQp.64How can I improve the quality of a scan?p.64How do I scan in black and white?p.64Why am I being asked for a PIN?p.65Canceling scan jobsp.65E-mailingp.66Setting up the printer to e-mailp.66Setting up the e-mail functionp.66Changing the e-mail settings after setupp.66Creating an e-mail contact listp.67Creating an e-mail contact list using the printer control panelp.67Creating an e-mail contact list using the computerp.68Sending e-mailp.69Tips for e-mailingp.69Scanning a document or photo to e-mailp.70Canceling an e-mailp.70Faxingp.71Setting up the printer to faxp.71Scenario 1: Standard telephone linep.71Scenario 2: Digital Subscriber Line (DSL)p.74Scenario 3: VoIP telephone servicep.75Scenario 4: Digital telephone service through a cable providerp.76Scenario 5: Countryor region-specific setupp.77Entering your user informationp.81Configuring the fax settingsp.82Configuring fax settings using the printer control panelp.82Configuring fax settings using the fax softwarep.83Creating a contact listp.84Creating a contact list using the printer control panelp.84Creating a contact list using the fax softwarep.84Sending faxesp.85Tips for sending faxesp.86Sending faxes using the printer control panelp.86Sending faxes using the computerp.86Receiving faxesp.87Tips for receiving faxesp.87Receiving faxes automaticallyp.87Receiving faxes manuallyp.88Faxing FAQp.88If I skipped the fax setup initially, do I need to run the installer again to set up the fax?p.88What is a splitter and what type of splitter should I use?p.89What is my fax number?p.89What is my dialing prefix?p.89When do I need to set Auto Answer to On?p.89How many rings should I set?p.90How do I set the distinctive ring for the printer?p.90How can I check the dial tone?p.90How do I adjust the speaker volume on the printer?p.91How can I make sure that fax calls go to the printer and voice calls go to the answering machine?p.91What settings work best with voice mail service?p.91How do I change the resolution of the documents that I fax?p.91How do I send a fax at a scheduled time?p.92How do I send a fax using a phone calling card?p.92How do I know that the fax was sent successfully?p.92How do I view the fax history of the printer?p.93How do I print a fax on both sides of the paper?p.93How do I forward a fax?p.93How do I block faxes?p.93Can I retrieve failed faxes?p.94Networkingp.95Installing the printer on a wireless networkp.95Wireless network compatibilityp.95Supported network security optionsp.95Printing a network setup pagep.96Information you will need during wireless setupp.96Information you will need during advanced wireless setupp.97Installing the printer on a wireless networkp.98Installing the printer on other computersp.99Determining the printer status using the network indicatorsp.100Special wireless installation instructionsp.101Assigning a static IP addressp.102Changing wireless settings after installationp.102Advanced wireless setupp.103Adding a printer to an existing ad hoc wireless networkp.103Configuring Wi-Fi Protected Setup manuallyp.104Use the Push Button Configuration (PBC) methodp.104Use the Personal Identification Number (PIN) methodp.104Configuring securityp.104Configuring 802.1X Authenticationp.105Installing the printer on an Ethernet networkp.105Information you will need to set up the printer on an Ethernet networkp.105Installing the printer on an Ethernet networkp.106Performing network management tasksp.106Switching between USB, Ethernet, and wireless connections (Windows only)p.106Switching between USB, Ethernet, and wireless connections (Macintosh only)p.108Sharing a printer in a Windows environmentp.110Sharing a printer in a Macintosh environmentp.111Networking FAQp.112What is Wi-Fi Protected Setup?p.112Where do I find my WEP key or WPA/WPA2 preshared key/passphrase?p.112What is an SSID?p.113Where do I find my SSID?p.113What is a network?p.113How do I find out what type of security my network is using?p.113How are home networks configured?p.114What is a USB cable?p.116Why do I need a USB cable?p.116How do I attach the USB cable?p.116How are infrastructure and ad hoc networks different?p.117Finding the signal strengthp.118How can I improve wireless signal strength?p.119Check the wireless signal qualityp.119Move the printer closer to the access pointp.119Remove obstacles between the access point and the printerp.119Remove sources of interferencep.119Arrange the network to reduce signal absorptionp.120How can I make sure my computer and printer are connected to the same wireless network?p.120Can I use my printer on a USB and a network connection at the same time?p.121What is a MAC address?p.122How do I find the MAC address?p.122What is an IP address?p.123What is TCP/IP?p.123How do I locate IP addresses?p.123How are IP addresses assigned?p.124What is a key index?p.124What is the difference between Guided and Advanced setup?p.124Using SmartSolutionsp.125What are SmartSolutions?p.125Creating and customizing printer solutionsp.125Maintaining the printerp.127Maintaining ink cartridgesp.127Checking ink levelsp.127Aligning the printheadp.127Cleaning the printhead nozzlesp.128Cleaning the exterior of the printerp.128Cleaning the scanner glassp.129Cleaning the touch screenp.129Moving the printer to another locationp.130Troubleshootingp.131Before you troubleshootp.131If Troubleshooting does not solve your problemp.131Setup troubleshootingp.131Incorrect language appears on the displayp.132Change the language using the printer menusp.132Software did not installp.132Make sure that your computer meets the minimum system requirementsp.132Temporarily disable security programs in Windows before installing the softwarep.132Check the USB connectionp.132Reconnect the printer power supplyp.132Print job does not print or is missing pagesp.133Make sure the ink cartridges are inserted correctlyp.133Select your printer from the Print dialog before sending the print jobp.133Make sure the print job is not pausedp.133Make sure your printer is set as the default printerp.133Reconnect the printer power supplyp.133Remove and reconnect the USB cable connected to your printerp.133Check the USB connectionp.133Remove and reinstall the printer softwarep.134Printer is printing blank pagesp.134Replace the ink cartridgesp.134Clean the printhead nozzlesp.134Align the printheadp.134Printer is busy or does not respondp.134Make sure the printer is not in Sleep modep.134Reconnect the printer power supplyp.135Cannot delete documents from the print queuep.135Restart the computer and try againp.135Remove and reconnect the USB cable connected to your printerp.135Cannot print through USBp.135Check the USB connectionp.135Make sure the USB port is enabled in Windowsp.135Remove and reinstall the printer softwarep.136Understanding printer messagesp.136Alignment Problemp.136Cannot Collate Jobp.136Change [Paper Source] to [Size] Paperp.136Change [Paper Source] to [Size] [Type] Paperp.137Close Printerp.137Communication Errorp.137Default E-mail Messagep.137Duplex Unit Missingp.138E-mail Server Not Specifiedp.138E-mail Transmission Errorp.138Ink Cartridge Errorp.138Ink Cartridge Missingp.139Ink Cartridge Unsupportedp.139Ink Lowp.139Load [Paper Source] with [Size] Paperp.139Load [Paper Source] with [Size] [Type] Paperp.140Memory Device Errorp.140Network [x] Software Errorp.140No E-mail Addressp.140Out of Paper in Tray [x]p.140Paper Tray [x] Detectedp.140Paper Tray [x] Removedp.141Printer Memory Fullp.141Printhead Cannot Movep.141Printhead Errorp.141Printhead Missingp.142Printhead Unsupportedp.143Printhead Warningp.144Proxy Errorp.144Replace Ink Cartridgep.145Scanner ADF Cover Openp.145Scanner Disabledp.145Security Certificate Errorp.145Short Paperp.145SmartSolutions Update Failedp.145Standard Network Software Errorp.146Unable to Retrieve the Solutionp.146Unrecoverable Scan Errorp.146USB Device Not Supportedp.146USB Hub Not Supportedp.146Clearing paper jamsp.146Paper jam in the printerp.146Paper jam in the exit trayp.149Paper jam in the duplex unitp.149Paper jam in the ADF (select models only)p.150Paper or specialty media misfeedsp.152Check paper conditionp.152Check paper loadingp.152Remove each page as it is printedp.152Adjust the paper guides to fit the loaded paperp.152Print troubleshootingp.153Poor quality at the edges of the pagep.153Check minimum print settingsp.153Select the Borderless print featurep.153Streaks or lines on printed imagep.154Check the ink levelsp.154Select a higher print quality from the printer softwarep.154Make sure the ink cartridges are properly installedp.154Align the printheadp.154Clean or Deep Clean the printhead nozzlesp.154Print speed is slowp.154Select a lower print quality from the printer softwarep.154Manually select a paper type that matches the type of paper you are usingp.154Remove and reinstall the printer softwarep.154Maximize computer processing speedp.154Add memory to the computerp.154Computer slows down when printingp.155Check the USB connection between the printer and computerp.155Refresh your network connectionsp.155Close all applications not in usep.155Check your computer performancep.155Copy and scan troubleshootingp.155Copier or scanner does not respondp.155Set your printer as the default printerp.155Remove and reinstall the printer softwarep.155Scanner unit does not closep.156Poor copy or scanned image qualityp.156Clean the scanner glassp.156Adjust the scan qualityp.156Review the tips for copying, scanning, and improving print qualityp.156Use a clearer version of the original document or imagep.156Make sure the document or photo is loaded facedown on the scanner glass and in the correct cornerp.156Partial copies or scans of documents or photosp.156Make sure the document or photo is loaded facedown on the scanner glass and in the placement cornerp.156Select a paper size that matches the loaded paperp.156Make sure the Original Size setting matches the size of the document you are scanningp.156Scan was not successfulp.156Check the USB connectionp.156Restart the computerp.157Scanning takes too long or freezes the computerp.157Close other software programs that are not being usedp.157Restart the computerp.157Cannot scan to a computer over a networkp.157Make sure the printer and the destination computer are connected to the same networkp.157Make sure the printer software is installed on the destination computerp.157E-mail troubleshootingp.157Cannot send e-mailp.157Check your e-mail configuration settingsp.157Check your network connectionp.157Check your proxy configurationp.157Make sure to enter a valid recipient e-mail addressp.158Make sure the recipient mailbox is not fullp.158Cannot attach filesp.158Select a supported file type (JPEG or PDF)p.158Make sure the file size is not too largep.158Fax troubleshootingp.158Fax troubleshooting checklistp.158Cannot send faxesp.159Make sure to enter your user information in the printerp.159Reduce the transmission speed of the fax modemp.159Enable error correctionp.159Enable automatic fax conversionp.159Make sure that the Dial Prefix setting is correctp.160Cannot receive faxesp.160Make sure that you have configured the correct settings for your setupp.160Make sure that the printer is connected to an analog portp.160Make sure to free up printer memoryp.160Make sure that Fax Forwarding is disabledp.160Increase the ringer volumep.160Make sure that you have the correct manual answer codep.161Cannot run the fax softwarep.161Make sure a fax driver is installedp.161Make sure the printer is connected to a telephone linep.161Fax error messages on the printer control panelp.161Memory card troubleshootingp.163Memory card troubleshooting checklistp.163Nothing happens when a memory card is insertedp.163Reinsert the memory cardp.163Network troubleshootingp.163Network troubleshooting checklistp.164The Continue button is unavailablep.165Check if the USB cable is securely plugged into the USB ports on both the computer and the printerp.165Make sure the printer is plugged in and turned onp.165Make sure the USB port on the computer is workingp.165Make sure the USB cable is workingp.165Make sure you are using the correct CD for your printer modelp.165Reconnect the printer power supplyp.165Run the installer againp.166Make sure your computer is able to acknowledge USB activity on the USB portp.166Computer firewall is blocking communication with the printerp.166Communication with printer lost when connected to Virtual Private Network (VPN)p.166Wireless troubleshootingp.167Resetting the wireless settings to factory defaultsp.167Cannot print over wireless networkp.167Wireless print server not installedp.170“Communication not available” message displays when printing wirelesslyp.170Resolving intermittent wireless communications issuesp.172Noticesp.175Product informationp.175Edition noticep.175UNITED STATES GOVERNMENT RIGHTSp.176Trademarksp.176Federal Communications Commission (FCC) compliance information statementp.176Modular component noticep.177Licensing noticesp.177Noise emission levelsp.177Waste from Electrical and Electronic Equipment (WEEE) directivep.178Product disposalp.178Battery noticep.178Static sensitivity noticep.178ENERGY STARp.179Temperature informationp.179Power consumptionp.179Product power consumptionp.179Sleep Modep.179Off modep.180Total energy usagep.180European Community (EC) directives conformityp.180Notice to users of the US telephone network: FCC requirementsp.180Notice to users of the Canadian telephone networkp.181Notice to users of the New Zealand telephone networkp.182South Africa telecommunications noticep.183Notice to Users in the European Unionp.183Regulatory notices for wireless productsp.184Exposure to radio frequency radiationp.184Industry Canada (Canada)p.184Notice to users in the European Unionp.185Statement of Limited Warrantyp.187LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.189MICROSOFT CORPORATION NOTICESp.191ADOBE SYSTEMS INCORPORATED NOTICEp.192Indexp.193
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 91E

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 91E

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 91E manual PDF

200 pages·7 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…