
User’s Reference
October 2001





The following illustrations show a Lexmark™C910 standard model configuration and a fully configured network printer. If you have attached paper handling options to your printer, it may look more like the fully configured model. For information on other possible configurations, refer to the Setup Guide.
Standard model configuration Fully configured


The Lexmark C910 is a network color printer that uses electrophotographic technology to deliver high quality images, presentation graphics, line art, and text. Its fast output, up to 28 pages per minute (ppm) for both four-color and monochrome print jobs-makes it the ideal solution for businesses where performance is critical.
The printer's flexible design allows it to support a variety of printing needs. For example, if you print a mixture of color and mono (black only) jobs, you can choose to maximize print speed or maximize supplies yield. If you need the printer to match the color process used in a particular application, you can select RGB or CMYK color corrections. You can also adjust the printed colors to more closely represent the colors on your computer display.
A variety of connectivity options make the printer an excellent choice for all types of system environments. You can attach up to two internal adapters to support network configurations requiring Ethernet, Token-Ring, LocalTalk, serial, infrared, or additional parallel ports. You can even attach a class 1 fax modem to the optional serial port and receive faxes directly to your printer.

The printer also offers flexible paper handling. It supports a wide variety of paper sizes, from A5 to A3 and 11x17 in., and has a standard multipurpose feeder that makes it easy to print on envelopes, transparencies, labels, card stock, and non-standard size paper. You can add up to three optional drawers to the base printer, which can increase the printer's paper capacity to 2300 sheets. You can also add an optional high capacity feeder making the total paper capacity 5300 sheets.
Your printer can print four-color and mono jobs at up to 28 ppm. With all printers, print speed varies depending on specific characteristics of the job, such as the size of the formatted page, the number of fonts, the number and complexity of images and graphics, and so on. Printing a mix of color and mono jobs may also slow printing, depending on the printer settings you have chosen.
Your printer ships with 64MB of memory for fast, efficient processing of color jobs. (Some models may ship with more memory.)
You can install an optional hard disk for storing downloaded resources and job statistics, and for spooling or collating print jobs. Resources stored in flash memory or on disk are retained in memory even after the printer is turned off and back on.
The printer comes equipped with a 550-sheet paper tray and a multipurpose feeder. (Some models may ship with a second 550-sheet tray.) The multipurpose feeder lets you load a stack of envelopes, transparencies, labels, or card stock for multiple-page jobs. To increase paper feeding capacity, you can attach up to three optional drawers, each with a 550-sheet tray, and one optional 3000-sheet high capacity feeder.

To prevent print quality problems, do not touch the roller on the bottom of the toner cartridge, the shiny green tube on the photodeveloper, the film on the transfer belt, or the fuser rollers. Scratches or fingerprints on any of these surfaces can affect print quality.
Always use media that meets the recommended guidelines. Refer to the Card Stock & Label Guide for more information.
Feeding media that is too heavy, too light, damp, damaged, or otherwise unacceptable for this printer may result in damage to the printer, paper jams, or print quality problems.
Some print quality problems may indicate it is time to replace certain printer supplies. Check the operator panel display, the Supplies Menu, or MarkVision for an indication of any supply items that may need to be replaced.
Depending on the type of jobs you print and the media you use, some parts or supplies may wear or become expended faster than anticipated. See Maintenance for more information about supplies and when to replace them.
To ensure high quality output on transparencies, we recommend using the following Lexmark transparencies. They have been designed specifically for your printer:
P/N 12A5940 (letter size)
P/N 12A5941 (A4 size)
These transparencies have characteristics that minimize curl and optimize toner transfer in a wide range of printing environments. If you use other transparencies, the print quality may be unacceptable or if you use transparencies not intended for laser printers, you could cause damage to the printer.
Handle transparencies carefully because fingerprints may affect the adhesion of toner. Always set the Paper Type to Transparency before printing transparencies. This adjusts the fuser temperature and slows the print speed to ensure the best possible transfer of toner.
See Loading paper and transparencies for more information.

To cancel a print job:
1 Press Menu.
Job Menu appears on the first line of the display and Cancel Job appears on the second line.
2 Press Select.
Canceling Job briefly appears on the display. The printer finishes printing any page already being printed, and then stops. The printer returns to the Ready state.

Your printer driver provides you with the best quality output for various types of printing needs. However, you may want more control over how your printed document will look.
Your printer default is set to give you the best screen frequency setting for high quality business graphics. You can however control the image smoothing, color correction, print mode, and toner darkness settings used during printing. Adjusting any of these settings affects the output of your documents. These setting adjustments can easily be made through your printer driver, operator panel, or MarkVision remote operator panel. Refer to the drivers CD for information on MarkVision.
Different printing needs do require different screen frequency settings; for example, offset printing requires a higher setting, whereas newsprint generally requires a lower setting. Your printer default is set to give you the best screen frequency setting for high quality business graphics.
You can turn Image Smoothing on from the graphics tab of your printer driver or from the operator panel. This increases the contrast and sharpness of bitmapped images and smooths color transitions. This setting is useful for images downloaded from the World Wide Web at 72 dpi. The setting has no effect on images downloaded at 300 dpi resolution or higher.
Color Correction lets you modify the color settings used to print your documents. The Color Correction settings you can choose from are: Auto, Display, CMYK, Off, Vivid, and Manual. Auto is the default setting when the printer is shipped from the factory. It uses different color profiles for the different objects on the page (text, graphics, and images).
For more information refer to the Color correction section of the Color Menu.
You can select between color or black and white printing. The Black and White setting converts any colors in your document to solid black. This setting produces output just like any standard monochrome printer using various shades of gray. This setting can be especially useful when you have replaced a monochrome printer and want to print occasional color. Cost conscious users benefit most by using this setting as a default and print color only when needed.

This setting lets you adjust the amount of toner released during printing. Your printer offers five Toner Darkness settings. The values range from 1 (lightest setting) to 5 (darkest setting). The default toner darkness setting is 4.
In both PostScript and PCL emulations, 100% black text prints using black toner (K of CMYK). This results in sharp, crisp text characters. The printer applies a unique screening algorithm to small text (less than 24 points in size). This helps ensure that small point size text has smooth, crisp edges.
The term halftone screen refers to the pattern of dots applied to an object on the page (text, graphics, or images). If you look at a black and white photograph in a magazine, it appears to contain many shades of gray. If you place the same picture under a magnifying glass, you see that it is actually composed of a large number of small dots. These dots, also known as pels, may be of varying sizes or varying tones. Without halftoning, it would not be possible to produce quality photographic images on a page printer. This process of representing an image as a series of halftones is known as halftone screening.
Halftone screens have three main attributes: screen frequency, screen angle, and spot function. The halftone screen is further divided into halftone cells. These cells contain the individual pel spaces. The screen frequency and angle attributes determine both the number of halftone cells that make up a halftone screen and the orientation of the cell.
The spot function determines which of the individual pels in the halftone cell is turned on to represent a particular gray level or color tone. The following illustration shows a halftone screen and halftone cells rotated 45 degrees.
Frequency (cells per inch)
Spot function · Angle

The screen frequency is the number of halftone cells per inch. A higher screen frequency setting increases the number of halftone cells per inch. Increasing the number of halftone cells per inch does not necessarily give you better quality. The reason for this is the higher settings may make the colors or halftones seem to run together or bleed.
Different printing needs do require different screen frequency settings; for example, offset printing requires a higher setting, whereas newsprint generally requires a lower setting. Your printer default is set to give you the best screen frequency setting for high quality business graphics.
The default angle of the halftone screen and cells place the dots so they are the least noticeable to the eye. It also ensures the alignment of color through all four color planes. By avoiding the placement of halftone cells at an angle of 90 degrees, the viewer’s eyes are focused on the image and not on the dots.
The spot function determines the shape of the dots by controlling the order in which the pels in the halftone cell are turned on. The printer code defines the order by assigning a priority to each individual pel within the halftone cell. By turning on or printing a portion of the pels within the halftone cell and then combining the different halftone screens, your printer is able to print millions of colors.

This section contains information about understanding the operator panel, changing printer settings, and understanding operator panel menus.
You can change most printer settings from your software application or printer driver. Settings you change from the application or printer driver apply only to the job you are preparing to send to the printer.
Changes made to printer settings from a software application override changes made from the operator panel.
If you cannot change a setting from your application, use the operator panel or the remote operator panel available from MarkVision. Changing a printer setting from the operator panel or from MarkVision makes that setting the user default. Refer to the drivers CD for information about MarkVision.
The printer operator panel has a 2-line by 16-character liquid crystal display (LCD), five buttons, and one indicator light.
1 Menu 2 Select 3
The indicator light gives information about the status of your printer. If the light is:

Use the five operator panel buttons to open a menu, scroll through a list of values, change printer settings, and respond to printer messages.
The numbers 1 through 6 appear beside the operator panel buttons; these numbers are used to enter personal identification numbers (PIN) for Print and Hold jobs. For more information, see Using the Print and Hold function.
The following information describes the functions of each button.
panel.
Go Press the Go button to:
If you’ve changed printer settings from the operator panel menus, press Go before sending a job to print. The printer must display Ready for jobs to print.
Menu Each end of the button has a function. Press Menu:
For menu items with numeric values, such as Copies, press and hold Menu to scroll through the values. Release the button when the number you want is displayed.
Select Press Select to:
Return Press Return to return to the previous menu level or menu item.
Stop Press Stop at the Ready, Busy, or Waiting message to temporarily stop all activity and take the printer offline. The operator panel status message changes to Not Ready.
Press Go to return the printer to the Ready, Busy, or Waiting state.
From the operator panel, you can select menu items and associated values to print your jobs successfully. You can also use the panel to alter the setup and operating environment of the printer. See Using printer menus for an explanation of all the menu items.

You can modify printer settings by:
To select a new value as a setting:
1 From a Ready status message, press Menu. The menu names appear.
2 Continue to press and release Menu until you see the menu you need.
3 Press Select to select the menu or menu item displayed on the second line of the display.
– If the selection is a menu, the menu opens and the first printer setting in the menu appears. – If the selection is a menu item, the default setting for the menu item appears. (The current user default setting has an asterisk [*] beside it.)
Each menu item has a list of values for the menu item. A value can be:
– A phrase or word to describe a setting – A numerical value that can be changed – An On or Off setting
4 Press Menu to move to the value you need.
5 Press Select to select the value on the second line of the operator panel. An asterisk appears beside the value to indicate that it is now the user default setting. The new setting appears for one second, clears, displays the word Saved, and then displays the previous list of menu items.
6 Press Return to go back to previous menus. Make additional menu selections to set new default settings. Press Go if this is the last setting to change.
User default settings remain in effect until you save new settings or restore the factory defaults. Settings you choose from your software application can also change or override the user default settings you select from the operator panel.
Complete the following steps to print a list of the current user default settings and installed printer options:
1 Make sure the printer power is on and the Ready status message appears.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Print Menus, and then press Select.
The message Printing Menu Settings appears and remains until the page prints. The printer returns to Ready when the page or pages finish printing.
If a message appears, see Understanding printer messages for more information.

4 Verify that the options you installed are correctly listed under “Installed Features.”
If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option.
non-ground fault interrupter (GFI) circuit.
5 Verify the amount of memory installed is correctly listed under “Printer Information.”
6 Verify that the paper trays are configured for the sizes and types of paper you loaded.
The diagram in Using printer menus shows the menu items in each menu.
An asterisk (*) next to a value indicates the factory default setting. Factory defaults may differ for different countries.
Factory defaults are the function settings in effect the first time you turn your printer on. These remain in effect until you change them. Factory defaults are restored if you select the Restore value for the Factory Defaults menu item in the Utilities Menu. See Restoring factory default settings for more information.
When you select a new setting from the operator panel, the asterisk moves next to the selected setting to identify it as the current user default.
User defaults are the settings you select for different printer functions and store in printer memory. Once stored, these settings remain active until new ones are stored or the factory defaults are restored. See Changing printer settings.
select from the operator panel.
If your printer is configured as a network printer available to a number of users, Menus Disabled may appear when you press Menu from the Ready state. Disabling the menus prevents users from using the operator panel to inadvertently change a printer default that has been set by the person managing the printer. You can still use Print and Hold features, clear messages, and select items from the Job Menu when printing a job, but you cannot change other printer settings. You can, however, use your printer driver to override printer defaults and select settings for individual print jobs.

When sending a job to the printer, you can specify in the driver that you want the printer to hold the job in memory. When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which held job you want to print.
To learn more about this function, click a topic:
Once held jobs are stored in printer memory, you can use the operator panel to specify what you want to do with one or more of the jobs. You can select either Confidential Job or Held Jobs (Repeat Print, Reserve Print, and Verify Print jobs) from the Job Menu. If you select Confidential Job, you must enter the personal identification number (PIN) you specified in the driver when you sent the job. See Confidential jobs for more information.
From either the Confidential Job or the Held Jobs menu items, you have five choices:

1 To access held jobs from the operator panel:
– If the printer is Busy, press Menu and the Job Menu appears. – If the printer is Ready, continue to step 2.
2 Press Menu until you see Held Jobs or Confidential Job on the operator panel display, depending on the type of job you want to access.
3 Press Select.
Confidential jobs for more information.
4 Press Menu until the action you want to take appears on the second line of the operator panel (print a job, delete a job, and so on).
5 Press Select.
– If you are looking for one particular job, press Menu to scroll through the list of jobs available, and press Select when the correct job is displayed. An asterisk (*) appears next to the job name indicating you have chosen to print or delete that job. – If you are prompted to enter the number of copies you want to print, use Menu to increase or decrease the number on the operator panel, and press Select.
6 Press Go to print or delete specific jobs you have marked.
The printer briefly displays messages indicating what print and hold functions it is performing, and then returns to the Ready state.
If the symbol appears on the display, it indicates that the printer had trouble formatting one or more of the held jobs. These formatting problems are most commonly the result of insufficient printer memory or invalid data that might cause the printer to flush the job.
When a symbol appears next to a held job, you can:
If formatting errors are a recurring problem with held jobs, your printer may require more memory.

If you send a Repeat Print job, the printer prints all requested copies of the job and stores the job in memory so you can print additional copies later. You can print additional copies as long as the job remains stored in memory.
requires extra memory to process additional held jobs.
If you send a Reserve Print job, the printer does not print the job immediately, but stores the job in memory so you can print the job later. The job is held in memory until you delete it from the Held Jobs menu. Reserve Print jobs may be deleted if the printer requires extra memory to process additional held jobs.
See Printing and deleting held jobs for information.
If you send a Verify Print job, the printer prints one copy and holds the remaining copies you requested from the driver in printer memory. Use Verify Print to examine the first copy to see if it is satisfactory before printing the remaining copies.
See Printing and deleting held jobs if you need help printing the additional copies stored in memory.

When you send a job to the printer, you can enter a personal identification number (PIN) from the driver. The PIN must be four digits using the numbers 1–6. The job is then held in printer memory until you enter the same four-digit PIN from the operator panel and choose to print or delete the job. This ensures that the job does not print until you are there to retrieve it, and no one else using the printer can print the job.
When you select Confidential Job from the Job Menu and then select your user name, the following prompt is displayed:
Use the buttons on the operator panel to enter the four-digit PIN associated with your confidential job. The numbers next to the button names identify which button to press for each digit (1–6). As you enter the PIN, asterisks are displayed on the operator panel to ensure confidentiality.
1 Menu 2 Select 3 Return 4
Go 5 Stop 6
If you enter an invalid PIN, the message No Jobs Found. Retry? appears. Press Go to reenter the PIN, or press Stop to exit the Confidential Job menu.
When you enter a valid PIN, you have access to all print jobs matching the user name and PIN you entered. The print jobs matching the PIN you entered appear on the display when you enter the Print A Job, Delete A Job, and Print Copies menu items. You can then choose to print or delete jobs matching the PIN you entered. (See Printing and deleting held jobs for more information.) After printing the job, the printer deletes the confidential job from memory.
Enter PIN · =****

To send a job to the printer:
1 Open the file you want to print.
2 From the File menu, choose Print.
3 Verify that the correct printer is selected in the dialog box.
4 Adjust the printer settings according to your need.
The printer settings available are determined by the application that opens your file.
screen, and then click OK.
5 Click OK or Print to send the job to the selected printer.

Color Correction lets you modify the color settings used to print your documents. The Color Correction settings you can choose from are: Auto, Display, CMYK, Off, Vivid, and Manual. Auto is the default setting when the printer is shipped from the factory. It uses different color profiles for the different objects on the page (text, graphics, and images).
You can use these settings to adjust your printed color to better match the colors of other output devices or standard color systems. You can also use these settings to adjust the brightness and saturation of your text and business graphics. You can access and change these settings through your printer driver Color tab or the operator panel Color Menu.
The following is an overview of the Color settings and their applications.
When your Color Correction is set to Auto, the printer applies different color profiles to each object on the printed page. This setting provides high quality output for text, graphics, images, line art, and charts. This setting is most useful for documents that contain a variety of objects.
You can use this setting to print color that approximates the colors on your computer screen. This setting uses common color tables to translate the color settings displayed on your monitor into the color values used by the printer CMYK color model.
This setting is generally used when your application does not do its own color correction and defines colors as RGB (Red, Green, Blue), HLS (Hue, Lightness, Saturation), or HSB (Hue, Saturation, Brightness).
produce colors that are impossible to duplicate on your monitor and your monitor can display colors that cannot be duplicated on any printer. For more information, see Color difference.
When you select CMYK as your color correction, the printer expects to receive CMYK color values from your software. Use this setting when attempting to reproduce standard CMYK colors such as Pantone or when printing CMYK images.

If you use this setting without the necessary color management software or your application does not provide the correct information, your printed output may have unexpected results.
When you select Off as your color correction, the printer expects to receive the necessary color correction from your software. Use this setting when you have software that manages its own color correction or if you use another color management tool.
If you use this setting without the necessary color management software or your application does not provide the correct information, your printed output may have unexpected results.
This setting can help you print brighter colors. The Vivid setting adjusts the CMYK components, resulting in more saturated colors. You may want to use this setting when creating overhead transparencies to enhance or sharpen your colors if they seem faded. This setting is especially useful if you like saturated colors and color matching is not a concern. For example, you can saturate your business graphics to be more pleasant or make presentations more dynamic. Since you are saturating your color, flesh tones and other colors may not seem lifelike.
When your Color Correction is set to Manual, you can apply customized color correction to each type of object on the page. See Manual Color for more information.

There are many color management systems on the market today. They range from simple swatchbooks to specially designed and designated color servers. A color management system (CMS) helps you match colors across a number of devices, including scanners, monitors, and printers. A CMS ensures what you see at every step of the publishing process matches the printed output. Color management systems compensate for device limitations by taking into account the varying capabilities of different brands of monitors and printers. There are three major elements of a CMS: they are the device profile, color calibration, and translation.
Each piece of equipment is characterized or profiled. The profile reveals the color capabilities of the equipment. The profile includes details about which colors the device is capable of detecting, displaying, or printing. The device profile is used to convert different color values from one device to another.
Even the best equipment ages over time. For example, a monitor capable of displaying very accurate colors when purchased eventually dims as it ages. Calibration ensures consistency by returning colors to their original specifications. You should calibrate your equipment at the interval your CMS specifies. Without calibration, your output may be different than you expect.
Translation is the most complex element of a CMS. Because each device is based on a device- dependent color model, such as RGB or CMYK, the range of colors each device supports is different. It is difficult and sometimes impossible to produce a particular color on different devices when each device uses a different color model.
Translation requires a device-independent color model. Most color management systems are based on the CIE color space model. This color space specification was devised by the Commission Internationale de l'Eclairage (CIE). Rather than translating RGB to CIE and CIE to CMYK, most CMS’s translate directly from RGB to CMYK using the CIE color space as a reference.

There are many color management systems for you to choose from. The type of CMS you choose impacts the color quality of your printed output. Choose a CMS that best meets your cost and performance needs. Some popular color management systems are described here.
Microsoft Windows 95/98/Me, Windows 2000, and Windows NT support Image Color Management (ICM). ICM is an operating system-level CMS based on the CIE independent color model. It helps to translate color values between RGB and CMYK.
ColorSync 3 is an operating system-level CMS developed by Apple. It also uses the CIE independent model to translate between RGB and CMYK values.
Agfa FotoTune also uses the CIE independent color model to translate between RGB and CMYK values. It only works with certain applications, however, such as Adobe Photoshop.

Your printer gives you the power to communicate in color. Color attracts attention, commands respect, and adds value to your printed material or information. Using color increases readership and is read more often than the same material printed in black and white. Color can be used to motivate people and speed the analysis of complex data. When you print on-demand color, you save money.
To enhance your use and understanding about color printing, this section provides information about color and how to select, use, and adjust color for your network and desktop printing.
To be effective, the use of color needs to be planned. The reason for this is how the eye sees color. When light is used to produce color on your monitor or TV, it uses three primary colors. They are red, green, and blue (also known as RGB color). All printed output such as newspapers, magazines, brochures, and of course your documents use the colors cyan, magenta, yellow, and black (known as CMYK color). Because the colors are presented to the eye differently, what you see on your monitor may look different than what you have printed. By understanding how we see color on the screen and how we see color in printed documents, we can better plan the use of color.
When we see color, we actually see light that is passed through or reflected from an object. What our eyes perceive as visible light are wavelengths. Our eyes are sensitive to three specific wavelength colors: red, green, and blue.
When you look at your monitor, you see red, green, and blue light that is projected into your eyes. This additive color begins with black and adds red, green, and blue to produce the colors you can see. If you add equal amounts of red, green, and blue, you produce white. The images and colors you see on your screen are created using various amounts of red, green, and blue.

Notice the three primary additive colors red, green, and blue in the illustration. You can see that when all three colors are combined, you get white. However, look at the area where any two colors overlap. What you see is cyan, magenta, or yellow. Equal amounts of green and blue produce cyan. Equal amounts of blue and red produce magenta, and equal amounts of red and green produce yellow. The toner colors used to place color on your printed material are cyan, magenta, yellow, and black.
The colors in newspapers, magazines, and the documents you print are based on the light being reflected from the printed material and into your eyes. The color you see is subtractive color. Subtractive color begins with white light. Portions of the white light wavelength are then subtracted based on the colors present on the printed page. What this means is the light reaching your document is partially absorbed by the toner placed on the page. For example, when white light encounters cyan, it absorbs the red wavelength in the light and reflects blue and green toward your eyes.
If you add equal amounts of cyan, magenta, and yellow, you create black. When you combine these colors equally in your printed material you create what is known as process black. When printed, process black looks like a very dirty or muddy brown. Because of this, your printer has a black toner cartridge to provide you with true black for all your printing needs.

Most software applications today provide us with a WYSIWYG (What You See Is What You Get) environment. This helps us develop the look of our document. However, the difference between the additive and subtractive colors may sometimes cause a problem between what you see and what you get. This is due to the difference between additive and subtractive colors. The reason for this lies in the color spectrum of the different devices.
Your printer is capable of delivering over 16 million colors. With such a large variety of colors to choose from, you'll probably be able to closely match most of your screen designs. There are, however, colors your printer can produce that are impossible to duplicate on your monitor and there are colors your monitor can display that cannot be duplicated on any printer.
There are many ways you can ensure the color on the screen and the color you print are the same or at least a very close match. When you create a swatch like the one below, you can choose and compare your printed and screen colors.
The easiest way for you to get consistent color from your screen to your printer is to select standard colors. When you produce color on your screen, it is produced using a color model. A color model is a system that defines color according to a set of basic properties. Most software applications can use this color model to closely match the colors you have on your screen.
As stated earlier, one simple method to aid in planning the use of color is to produce a color swatch of the colors you plan to use. Then, you can see how these colors will look when printed.

As your monitor ages, the colors on the screen also change. Changing the toner cartridges, photodeveloper cartridge, and paper in your printer also has a major impact on the color in your printed document. Always print a new swatch of the colors you plan on using before you invest a lot of time creating your screen designs.

The print quality and feed reliability of your printer and options can vary with the type and size of print media you use. This section provides guidelines for each type of print media. For information on card stock and labels, refer to the Card Stock & Label Guide located on the Lexmark Web site at www.lexmark.com.
Always print samples on the print media you are considering before buying large quantities.
Click a topic for more information:
The following paper characteristics affect print quality and reliability. Keep these guidelines in mind when evaluating new paper stock.
The printer can feed paper weights from 60 to 163 g/m2 (16 to 43 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing paper jams. For best performance, use 90 g/m2 (24 lb) Hammermill Laser Print paper. To use paper narrower than 182 x 257 mm (7.2 x 10.1 in.), we recommend the weight be greater than or equal to 90 g/m2 (24 lb bond).
Curl is the tendency of paper to curve at its edges. Excessive curl can cause paper feeding problems. Curl usually occurs after the paper passes through the printer fuser, where it is exposed to high temperatures. Excessively high toner coverage, humid conditions, and paper types can contribute to paper curling.

The degree of smoothness of paper directly affects print quality. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems.
The amount of moisture in the paper affects both print quality and the ability of the printer to feed the paper properly. Leave the paper in its original wrapper until you are ready to use it. This limits the exposure of the paper to moisture changes that can degrade its performance.
Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possess characteristics that can result in degraded paper handling.
To ensure the best print quality and feed reliability, use 90 g/m2 (24 lb) Hammermill Laser Print paper. Business papers designed for general business use may also provide acceptable print quality.
Always print several samples before buying large quantities of any type of paper. When choosing any papers, consider the weight, fiber content, and color of the paper.
The laser printing process heats paper to high temperatures of 165°C (329°F). Use only papers that are able to withstand these temperatures without discoloring, bleeding, or releasing hazardous emissions. Check with the manufacturer or vendor to determine whether the paper you’ve chosen is acceptable for laser printers.

The following papers are not recommended for use with the printer:
In some cases, you can adjust registration with your software application to successfully print on these forms.
Use the following guidelines when selecting preprinted forms and letterhead paper:
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 165°C (329°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in the toner. Inks that are oxidation-set or oil-based should meet these requirements. Latex inks might not meet these requirements. If you are in doubt, contact your paper supplier.
Proper paper loading helps prevent paper jams and ensure trouble-free printing.

To help avoid jams or poor print quality:
When printing on envelopes:
Moist envelopes or envelopes containing high humidity (over 60%) may become sealed from the high fuser temperature.
The laser printing process heats envelopes to a temperature of 165°C (329°F). Use only envelopes that are able to withstand these temperatures without sealing, excessive curling, wrinkling, or releasing hazardous emissions. If you have any doubts about the envelopes you are considering using, check with the envelope supplier.

For best performance, use envelopes made from 75 g/m2 (20 lb bond) paper. You can use up to 105 g/ m2 (28 lb bond) weight for the multipurpose feeder as long as the cotton content is 25% or less. Envelopes with 100% cotton content must not exceed 90 g/m2 (24 lb bond) weight.
Do not use envelopes that:
The printer can print on many labels designed for use with laser printers. These labels are supplied in letter size and A4 size sheets.
When printing on labels:
requires a special fuser cleaner for label applications in order to optimize feed reliability.
For detailed information on label printing, characteristics, and design, refer to the Card Stock & Label Guide, available on Lexmark Web site at www.lexmark.com.
Card stock is single-ply and has a large array of properties. The orientation of paper fibers, moisture content, thickness, and texture can all affect printing on card stock.

When printing on card stock:
For more information, refer to the Card Stock & Label Guide, available on the Lexmark Web site at www.lexmark.com.
The printer can print directly on transparencies designed for use in laser printers. Print quality and durability depend on the transparency used. Always print samples on the transparencies you are considering before buying large quantities.
To ensure high quality output on transparencies, we recommend using the following Lexmark transparencies. They have been designed specifically for your printer:
P/N 12A5940 (letter size)
P/N 12A5941 (A4 size)
The Paper Type setting should be set to Transparency to help prevent jams. (See Paper Type for detailed information about this setting.) Check with the manufacturer or vendor to determine whether your transparencies are compatible with laser printers that heat transparencies to 212°C (414°F). Use only transparencies that are able to withstand these temperatures without melting, discoloring, offsetting, or releasing hazardous emissions. For detailed information, refer to the Card Stock & Label Guide, which is available on the Lexmark Web site at www.lexmark.com.
and the multipurpose feeder.
Be careful when you handle transparencies. Fingerprints on the surface of the transparency cause poor print quality.

This section provides information about loading media in the input options. Proper paper loading helps prevent paper jams and ensure trouble-free printing.
Before loading paper, find the recommended print side of the paper you’re using. This information is usually indicated on the paper package.
Click below for information on:

You can attach an optional high capacity feeder to your printer. This can provide an additional input of 3,000 sheets of paper.
capacity feeder must be properly adjusted for A4 or Letter size paper. If the paper guides are in the wrong position, you may experience paper feeding problems.
To load the high capacity feeder:
1 Open the top cover as shown.
The paper guides are set at the factory and may already be configured for your size paper.
2 Inspect the position of the paper guides.
If the paper guides are correctly set for the size paper you are loading, go to step 6, if not continue with step 3.
the paper guides are in the wrong position, you may experience paper feeding problems.

3 Loosen the left and right paper guide thumbscrews.
4 Slide the guides left or right to the correct position for the size paper you are loading (A4 or Letter).
5 Tighten the left and right paper guide thumbscrews.

6 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
7 Place the paper against the paper guides with the print side up.

8 Press the paper tray button
The paper tray lowers to let you load up another 500 sheets of paper.
the tray to go down. Add more paper to lower the tray.
9 Place the paper against the paper guides with the print side up.
10 Repeat step 8 and step 9 until you have filled the tray or loaded the desired quantity.
11 Close the top cover.
Make sure the high capacity feeder is pushed completely against the printer.

The multipurpose feeder can hold several sizes and types of paper, such as transparencies and envelopes. It is useful for single page printing on letterhead, colored paper, or other special paper. Refer to the Card Stock & Label Guide for more information on paper types and sizes.
You can use the multipurpose feeder one of two ways:
Keep in mind the following capacities, paper dimensions, and operating tips when loading the multipurpose feeder.
The maximum stack height is 10 mm (0.4 in.). The multipurpose feeder can hold approximately:
The multipurpose feeder accepts paper within the following dimensions:

To load the multipurpose feeder:
1 Open the multipurpose feeder door, and then extend the recessed tray to accommodate the paper you will be using.

2 Slide the paper width guides to the correct position for the size paper you are loading.
3 Push down the bottom plate until it locks into place.

4 Prepare the print media for loading.
– Flex paper or fan envelopes back and forth. Do not fold or crease the paper. Straighten the edges on a level surface.
– Hold transparencies by the edges and avoid touching the print side. Fan the stack of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies.
5 Load one type of print media in the multipurpose feeder. Do not mix types. Click a topic for loading instructions:

a Load paper or transparencies in the center of the tray with the recommended print side face up.
b Continue with step 6.
a Load envelopes flap side down with the stamp area on the right. The end of the envelope with the return address area enters the multipurpose feeder last.
stick adhesives. These envelopes may severely damage the printer.
multipurpose feeder.
b Continue with step 6.

a For both simplex (single-sided) and duplex printing on letterhead, place the printed side face up.
b Continue with step 6.
6 Gently slide the print media into the multipurpose feeder.
7 Slide the width guides until they lightly rest against the edges of the print media. Do not bend the print media.
8 Push the SET button to the left to unlock the bottom plate.

9 Select the paper source, size, and type from your software application and select paper size and type from the operator panel.
a Make sure the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) are set to the correct value for the print media you are loading. (See Paper Size and Paper Type for detailed information about these settings.)
b Press Go to return to Ready.
1 Remove print media from the multipurpose feeder.
2 If necessary, push the extended tray in to collapse the multipurpose feeder to its short-length position.
3 Push down the bottom plate until it locks into place.

4 Close the multipurpose feeder door.

Your printer has two output bins: the standard output bin on top of the printer and an exit tray (bin 1). Your printer directs all media except transparencies and envelopes to the standard output bin. Transparencies are automatically directed to the exit tray (bin 1) to reduce curling.
If other print media curls, you can divert it from the standard bin to the exit tray (bin 1) through your printer driver, operator panel, or the MarkVision remote operator panel.
Exit tray (bin 1)
Standard output bin


The printer lets you know when you need to load paper. If a tray has less than 50 sheets of paper, Tray x Low appears on the display, where x corresponds to a paper tray. Open the tray and load paper to remove the message.
When you change the paper in the tray, make sure the paper guides are in the correct positions. The position of the left paper guide informs the printer of the size paper loaded in the tray. Feeding paper when the left or front paper guides are not in the correct position may result in misfeeds or paper jams.
If you load a different type of media, change the Paper Type setting in the Paper Menu.

Complete these instructions to load print materials into any of the standard or optional trays.
1 Pull the paper tray out until it stops.


2 Press the metal plate down until it locks.
3 Squeeze the left guide and slide it to the position for the size paper you are loading.

If the left paper guide is in the wrong position, you may experience paper feeding problems or incorrect page formatting.

5 Flex the sheets back and forth to loosen them, and then fan them.

Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
6 Place the paper in the tray, print side down.


7 Squeeze the front paper guide lever and slide the guide until it lightly touches the stack of paper.
8 Rotate the paper size dial until the size of the paper in the tray is indicated.


See Loading the multipurpose feeder for instructions on loading letterhead in the multipurpose feeder.
Follow the steps in Loading paper, card stock, or labels to load transparencies in the tray.
See Loading the multipurpose feeder for instructions on loading transparencies in the multipurpose feeder.

The optional heavy media tray replaces tray 1. For instructions on removing and installing tray 1, see Exchanging tray 1. The heavy media tray is specially designed for use with heavier plain paper, glossy paper, transparencies, labels, and card stock.
cause jams.
When the heavy media tray is installed, it turns the auto size sensing off. You must set the operator panel to the size and type of media you have placed in the tray.
1 See Loading a paper tray for instructions on placing print media in the heavy media tray.
For more information about using the operator panel and changing menu settings, see Using the operator panel.
2 Press Menu until you see Paper Menu, and then press Select.
3 Press Menu until you see Paper Size, and then press Select.
4 Press Menu until you see Tray 1 Size, and then press Select.
5 Press Menu until the size of paper you placed into the tray appears, and then press Select.
1 Press Return once.
Paper Menu appears on the first line and Paper Size appears on the second line.
2 Press Menu until you see Paper Type, and then press Select.
3 Press Menu until you see Tray 1 Type, and then press Select.
4 Press Menu until you see Custom Type 1, and then press Select.
5 Press Return once.
Paper Menu appears on the first line and Paper Type appears on the second line.
6 Press Menu until you see Custom Types, and then press Select.

7 Press Menu until you see Custom Type 1, and then press Select.
8 Press Menu until you see the type of media you loaded in the heavy media tray, and then press Select.

2 Lift the front of tray 1 and pull the tray forward.


3 Lower the front of the tray and pull the tray from the drawer slides.
4 Align the rollers on the side of the paper tray with slots on the left and right drawer slides.
5 Place the drawer rollers into the drawer slides and slide the drawer in until it stops.
insert the drawer, and then pull the other slide out and over the drawer roller until it stops.
6 Lift the front of the tray.


7 Slide the tray in until both tray stops pass the slide stops.
stop. If the slides move when you are installing the tray, you can hold one slide while you insert the drawer, and then hold the other slide.
8 Lower the front of the tray and slide it in.
9 Move the tray in and out to make sure it functions properly.
For instructions on loading the paper tray, See Loading a paper tray.

Use recommended media (paper, transparencies, envelopes, card stock and labels) for your printer to avoid printing problems. For detailed information about media characteristics, refer to the Card Stock & Label Guide located on the Lexmark Web site at www.lexmark.com. Brief guidelines for choosing paper and other media follow.
Sources Paper sizes supported Paper types supported Capacity
Tray 1 Letter, A4, Legal, Tabloid1, A3, B4
Paper, transparencies, glossy paper
550 sheets of 20 lb paper
130 sheets of glossy paper
Trays 2-4 Letter, A4, Legal, Tabloid,1 A3, B4, Universal2 Paper 550 sheets of 20 lb paper
Letter, A4, Legal, Tabloid1, A3, Universal2 Paper, glossy paper, transparencies, labels
250 sheets of labels
330 sheets of glossy paper
Letter, A4, A5, Legal, Tabloid1, A3, Executive, B4, JIS B5, Universal2
Paper, glossy paper, transparencies, labels, card stock
100 sheets of 20 lb paper
50 sheets of glossy paper
30 sheets of labels
50 sheets card stock
7¾, 9, 10, DL, C4, C5, B5 Envelopes 10 envelopes
Letter, A4 Paper 3000 sheets of 20 lb paper
1 Tabloid paper is 278.8 x 430.8 mm (11 x 17 in.) 2 Universal setting lets you select the following custom sizes: 139.7 x 210 mm to 215.9 x 355.6 mm (5.5 x 8.27 to 8.5 x 14 in.), 69.85 x 127 mm to 229 x 355.6 mm (2.75 x 5 to 9.01 x 14 in.) 148 x 182 mm to 215.9 x 355.6 mm (5.83 x 7.17 to 8.5 x 14 in.)
Your printer supports a wide variety of paper types, sizes, and weights. The standard tray (tray 1) and optional trays 2, 3, and 4 are marked with stack height letters A, B, C. The optional heavy media tray is marked with stack height letters D, E, and F.
Your printer supports a wide variety of paper types, sizes, and weights. The standard tray (tray 1) and optional trays 2, 3, and 4 are marked with stack height letters A, B, C. The optional heavy media tray is marked with stack height letters D, E, and F.

The following table lists recommended media, weights, and the stack height guide to use when loading the paper trays.
Stack height letter Recommended media
B 11x17, Legal, B4, A3 (90–105 g/m2, 24–28 lb bond)
C Letter, A4 (60–105 g/m2, 16–28 lb bond)
11x17, Legal, B4, A3 (60 - 90 g/m2, 16 - 24 lb bond)
F Letter, A4 (105–128 g/m2, 28–34 lb bond)
* Lexmark Glossy Paper is 120 g/m2, 80 lb. book, 32 lb bond. ** Lexmark Transparency weight is 120 g/m2.
print quality.
When printing photographic quality images, use a high-quality laser printer paper. We recommend the following paper for optimum results:
Paper Weight Size Part Number
Hammermill Laser Print 90 g/m2 (24 lb)
Lexmark Glossy Laser Paper 120 g/m2 (32 lb) Letter 12A5950
For printing text and typical business graphics, you may find 75 g/m2 (20 lb) paper designed for laser printers or photocopiers produces acceptable print quality. Always try a sample of any paper before buying large quantities.
Before loading paper, note the recommended print side identified on the paper package. Load paper with the recommended print side face down in the paper trays. For paper loading instructions, see Loading media.

The following are not recommended for your printer:
Preprinted papers such as letterhead must be able to withstand temperatures up to 175°C (347°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements. Latex inks may melt.
For best results, use the following Lexmark transparencies:
Description Size Part number
Professional color laser transparencies Letter 12A5940
These transparencies are designed to provide optimal print quality. Using other transparencies designed for laser printers may yield unpredictable results and possibly cause damage to your printer.
Transparencies must be able to withstand temperatures of 175°C (347°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
To order transparencies in the U.S., call 1-800-438-2468. In other countries, visit www.lexmark.com on the World Wide Web.
For transparency loading instructions, see Loading transparencies.
You can load up to 10 envelopes in the multipurpose feeder. Load envelopes flap side down with the stamp area on the right. The end of the envelope with the return address area enters the multipurpose feeder last. Do not load stamped envelopes. Before loading envelopes, fan the stack to prevent them from sticking together. For envelope loading instructions, see Loading envelopes.
To ensure the best print quality, set Paper Type to Envelope and select the correct envelope size before sending the job to print.

When printing on envelopes:
– Have excessive curl – Are stuck together – Are damaged – Contain windows, holes, perforations, cutouts, or embossing – Use metal clasps or string ties – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position
Use only labels designed for laser printers. Use only label sheets that have no gaps between the labels, as shown. Try a sample of any labels before purchasing a large quantity.
Acceptable labels Unacceptable labels
Labels must be able to withstand temperatures of 175°C (347°F) without melting, discoloring, offsetting, or releasing hazardous emissions. For detailed information on label printing, characteristics, and design, refer to the Card Stock & Label Guide on the drivers CD.
Feed labels only from the multipurpose feeder. When printing on labels:
For label loading instructions, see Loading paper, card stock, or labels.

more than 50 sheets of card stock into the multipurpose feeder. Loading more than 50 sheets of card stock or using the wrong paper source may cause paper jams or a failure to feed.
You can load 250 sheets of card stock in the heavy media tray. The properties of the card stock you choose—such as the orientation of the paper fibers, moisture content, thickness, and texture—can affect the print quality.
For optimum results, we recommend using Springhill Index Plus 90 lb card stock.
Card stock must be able to withstand temperatures up to 175°C (347°F) without melting or releasing hazardous emissions.
For more information on card stock your printer supports, refer to the Card Stock & Label Guide on the drivers CD.
Always set the Paper Type to Card Stock when printing on heavier paper. The printer then adjusts the fuser temperature and engine speed to ensure the best print quality.
For card stock loading instructions, see Loading paper, card stock, or labels.

Tray linking enables the automatic linking feature for trays when you use the same size and type of print media in multiple paper sources (trays).
For example, let’s say you have loaded two optional trays with the same size print media and both are set to the same paper type. When one tray becomes empty, the printer automatically selects print media from the other tray since the printer sees the trays as linked.
If you use different print media in the trays, each source with a different print media must have the Paper Type set to a unique value to disable the automatic linking feature. If all the trays do not have the same paper type when they are linked, you could mistakenly print a job on the wrong paper type.
To initiate tray linking:
1 Load paper of the same size and type in all the trays you want to link.
2 Make sure the paper guide is set to the proper position for the paper size you’ve loaded.
The position of the paper guide informs the printer of the paper size loaded in the tray.
If you want to link the multipurpose feeder to a tray, select the appropriate MP Feeder Size setting from the Paper Size menu.
3 Select the same Paper Type setting for all the sources.

Storing paper
Properly storing the media helps ensure trouble-free printing. Use the following guidelines:
By carefully selecting print media and loading them properly, you should be able to avoid most paper jams. If jams do occur, follow the steps outlined in Clearing paper jams. If jams occur frequently, make sure you follow these tips to avoid jams:

Print the menu settings page to check the status of printer supply items. See Printing the menu settings page for detailed instructions.
One or two pages print depending on the number of menu settings you have. Look for “Supplies Menu” on the page; each item indicates the percentage of remaining life.
You can also check the status of printer supply items using the operator panel.
1 Press Menu until you see Supplies Menu.
2 Press Select.
3 Press Menu until you see Supplies Life.
4 Press Select.
5 Press Menu to scroll through the printer supply items.


If you are experiencing print quality problems such as voids, light streaks, or light print, you may need to clean the LEDs inside the top cover.
1 Complete the steps to open the top cover.

2 Remove all toner cartridges. See Removing a toner cartridge for more information.

WARNING: Exposing the photodeveloper to light for prolonged periods of time can damage it.
Do not expose the photodeveloper to light for more than ten minutes. Fingerprints

can affect the performance of the photodeveloper. Avoid touching the photodeveloper anywhere except the handles.
with toner in hot water; this permanently adheres the toner to the clothing. Use cold water to remove toner that has soiled clothing.
3 Wipe the glass lenses of all four LED heads with a clean, dry cloth or tissue paper.

4 Reinstall all toner cartridges. See Installing a toner cartridge for more information.
area under the cover is free of hands, clothing, and other items.
5 Close the top cover and the front door.



area under the cover is free of hands, clothing, and other items.
1 Place both hands on the top cover as shown.
2 Press down firmly until the top cover clicks into place.


3 Rotate the top cover locking lever to the right.
cover and press down firmly until the top cover clicks into place.

Several settings in your application software or on the display let you conserve toner and paper:
For more information, see...
Supply Setting What the setting does
Toner Toner Darkness in the Color Menu
Lets you adjust the amount of toner released on a sheet of paper. The values range from 1 (lightest setting) to 4 (darkest setting).
Paper and specialty media
Multipage Print in the Finishing Menu
Prints two or more page images on one side of a sheet.
Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 12 Up, and 16 Up.
Combined with the duplex setting, Multipage Print lets you print up to 32 pages on one sheet of paper (16 images on the front and 16 on the back).
Duplex in the Finishing Menu
Available when you attach an optional duplex unit.
Paper and specialty media
Use your software application or printer driver to send a Verify Print job.
Lets you examine the first copy of a multiple-copy job to be sure it is satisfactory before you print the other copies. If the job is unsatisfactory, cancel the job.
Canceling a print job
Using the Print and Hold function
Use Held Jobs in the Job Menu to access your Verify Print job.


Your printer monitors the life of your photodevelopers. When a photodeveloper reaches the end of its life, the printer displays 84 Black Photo Dev Exhausted or 84 Color Photo Devs Exhausted. This message indicates it is time to replace one or more specified photodevelopers. For best print quality, make sure you replace the fuser when the printer displays 84 Black Photo Dev Life Warning or 84 Color Photo Dev Life Warning.
Press Go to clear the message. The Supplies message appears on the second line of the display to remind you that supplies need attention. You can open the Supplies Menu to see which photodeveloper is nearly exhausted.
The printer continues to display the Supplies message until you replace the photodeveloper or until it is exhausted.
To replace a photodeveloper, use the following steps or the instruction sheet supplied with the photodeveloper.
1 Complete the steps to open the top cover.

soiled with toner in hot water; this permanently adheres the toner to the clothing. Use cold water to remove toner.

2 Pull the waste toner arm away from the photodeveloper.

3 Use the tab to pull the photodeveloper approximately halfway out of the printer.
Some force is initially required to pull the photodeveloper past the locking spring.
4 Grasp the photodeveloper handle and continue to pull the photodeveloper out.

own color-coded position.
1 Remove the replacement photodeveloper from the packing material.
cover until you begin installing the photodeveloper.
2 Remove the tape from the photodeveloper and photodeveloper cover.
placed in a specific location inside the printer.

3 Align the photodeveloper with the slot under the matching color label.

4 While holding the photodeveloper with the left hand and the photodeveloper cover with the right hand slide the photodeveloper into the slot until it is fully seated.
As the photodeveloper slides in, slide off the photodeveloper cover.

Photodeveloper cover

5 Push the waste toner arm until it connects with the photodeveloper and snaps into place.
6 Repeat Removing a photodeveloper step 2 through Installing a photodeveloper step 5 to install additional photodevelopers.
area under the cover is free of hands, clothing, and other items.
7 Close the top cover and the front door.
For instructions about replacing other supply items, click one of the following headings:
Replacing a toner cartridge
Replacing the transfer belt
Replacing the oil coating roll
Replacing the fuser

For information about replacing an individual supply item, click the headings below:
Replacing the oil coating roll
Replacing the transfer belt
Replacing a toner cartridge
The printer calculates and stores information on the number of images that have been printed. When a count for a supply nears the end of the supplies life, the Supplies status message appears on the second line of the display to remind you there are supplies that need attention.
Open the Supplies Menu to view the supplies that need to be replaced. Replacement of these parts ensures peak printer performance and prevents print quality and paper feed problems resulting from worn parts.
1 Menu 2 Select 3
The printer counter keeps track of your toner cartridges, photodevelopers, fuser cleaner, fuser, and transfer belt. It posts a Low, Empty, Life Warning, or an Exhausted message on the display when one of these supplies nears or reaches an end of life condition. If you do not have the appropriate supply item, order one when the Low, Empty, or Life Warning message appears.

Press Go to clear the message. The Supplies status message appears on the second line of the display to remind you there are supplies that need attention. Press Menu to open the Supplies Menu and quickly determine the supply items that need to be replaced.
The printer continues to display the Supplies status message until you replace the required supply items.
After the Supplies status message appears, the printer continues to monitor the required supply items until the supply is exhausted. The printer displays Low, Empty, Life Warning, or Exhausted.
To prevent damage to your printer or its components, some supply items do not allow the printer to operate when the item is exhausted. When this occurs, you must install the appropriate new supplies before you can continue printing.

Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning.
Press Go to clear the message. The Supplies message appears on the second line of the display to remind you that supplies need attention. You can open the Supplies Menu to see the 80 Fuser Exhausted and 80 Fuser Life Warning messages.
The printer continues to display the Supplies message until you replace the fuser. To replace the fuser, use the following steps or the instruction sheet supplied with the fuser.
1 Turn the printer on.
2 Follow the instructions in the table for the message your printer is displaying.
Primary message Secondary message What you should do
80 Fuser Life Warning Select = Replace
Press Select if you want to replace the fuser now.
Press Go if you want to wait to replace the fuser.
80 Fuser Exhausted Select = Replace Press Select to replace the fuser.
80 Belt/Fuser Life Warning Select = Replace
Press Select if you want to replace the fuser now.
Press Go if you want to wait to replace the fuser.
80 Belt/Fuser Exhausted Select = Replace Press Select to replace the fuser.
The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items.
3 Turn the printer off.
1 Complete the steps in Preparing for maintenance on page 82.
2 Make sure the printer is turned off.
Go = Continue · Go = Continue


3 Turn off or unplug any optional devices connected to the printer.
WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.
4 Complete the steps to open the top cover.



6 Grasp the fuser handles and press both fuser release buttons.

7 Lift the fuser up and out.
new fuser.

1 Remove the replacement fuser from the packing material, and remove any packing material from the fuser.


2 Align the new fuser with the opening in the printer.

3 Lower the fuser until it snaps into place.
4 Remove the oil coating roll from the old fuser.

a Pull up on the locking tab to unlock the oil coating roll.

b Slide out the oil coating roll.

Hold the oil coating roll by the top, as indicated by the dark areas in the illustration.
slide the coating roll into the fuser immediately, place the coating roll on a sheet of plastic or other protective material to prevent stains.
Locking tab · Oil coating roll · Hold here


Make sure the oil coating roll drops down into position. It should click into place with no gap between it and the fuser.
area under the cover is free of hands, clothing, and other items.
6 Close the top cover and the front door.
7 Reconnect any optional devices to the printer.
8 Turn the optional devices on.
9 Turn the printer on.

The message Did you replace Fuser? appears.

10 Press Go to reset the fuser counter.
message or the 80 Belt/Fuser Exhausted message, see Replacing the transfer belt for instructions on replacing the transfer belt.
For instructions about replacing other supply items, click one of the following headings:
Replacing a toner cartridge
Replacing the transfer belt
Replacing the oil coating roll
Replacing a photodeveloper

Your printer monitors the life of your oil coating roll. When the oil coating roll reaches the end of its life, the printer displays 85 Coating Roll Exhausted. This message indicates that you must replace the oil coating roll to continue printing.
For best print quality, make sure you replace the oil coating roll when the printer displays 85 Coating Roll Life Warning. Press Go to clear the message. The printer continues to display the Supplies message until you replace the oil coating roll.
To replace the oil coating roll, use the following steps or the instruction sheet supplied with the oil coating roll.
1 Turn the printer off.
2 Turn off or unplug any optional devices connected to the printer.
WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.

3 Complete the steps to open the top cover.

4 Pull up on the locking tab to unlock the oil coating roll.


5 Slide the oil coating roll out of the fuser.
Hold the oil coating roll by the top, as indicated by the dark areas in the illustration.
6 Remove packing material from the new oil coating roll.
Hold here


7 Slide the oil coating roll into the fuser.
Make sure the oil coating roll drops down into position. It should click into place with no gap between it and the fuser.
area under the cover is free of hands, clothing, and other items.
8 Close the top cover and the front door.

11 Turn the printer on.
For instructions about replacing other supply items, click one of the following headings:
Replacing a toner cartridge
Replacing the transfer belt
Replacing the fuser · Replacing a photodeveloper

Your printer monitors the life of your transfer belt. When the transfer belt reaches the end of its life, the printer displays 80 Belt Exhausted. This message indicates it is time for you to replace the transfer belt. For best print quality, make sure you replace the transfer belt when the printer displays 80 Belt Life Warning.
Press Go to clear the message. The Supplies message appears on the second line of the display to remind you that supplies need attention. You can open the Supplies Menu to see 80 Belt Exhausted or 80 Belt Life Warning messages.
The printer continues to display the Supplies message until you replace the transfer belt. To replace the transfer belt, use the following steps or the instruction sheet supplied with the transfer belt.
1 Turn the printer on.
2 Follow the instructions in the table for the message your printer is displaying.
Primary message Secondary message What you should do
80 Belt Life Warning Select = Replace
Press Select if you want to replace the transfer belt now.
Press Go if you want to wait to replace the transfer belt.
80 Belt Exhausted Select = Replace Press Select to replace the transfer belt.
80 Belt/Fuser Life Warning Select = Replace
Press Select if you want to replace the transfer belt now.
Press Go if you want to wait to replace the transfer belt.
80 Belt/Fuser Exhausted Select = Replace Press Select to replace the transfer belt.
The Preparing for Maintenance message appears while the printer moves parts into position. After the parts are in position, the message Printer Ready for Maintenance appears, followed by Power Off to Replace Items.
3 Turn the printer off.
Go = Continue · Go = Continue

1 Complete the steps in Preparing for maintenance on page 95.
2 Make sure the printer is turned off.

3 Turn off or unplug any optional devices connected to the printer.
WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.
4 Complete the steps to open the top cover.



5 Loosen the thumbscrews on each side of the transfer belt cover.


7 Loosen the thumbscrews on each side of the transfer belt.

1 Remove the replacement transfer belt from the packing material.

2 Align the transfer belt with the opening in the printer.

3 Slide the transfer belt in until it is fully seated.



5 Align and place the transfer belt cover as shown.
WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.


7 Lift and remove the four shipping spacers from the transfer belt.
area under the cover is free of hands, clothing, and other items.
8 Close the top cover and the front door.
9 Reconnect any optional devices to the printer.
10 Turn the optional devices on.

11 Turn the printer on.
The message Did you replace Belt? appears.

12 Press Go to reset the transfer belt counter.
Once the counter is reset, the Printing Alignment Page message appears and a test page prints. After the test page has printed, you are prompted to enter alignment values for each setting.
13 Press Menu to choose the alignment value.
14 Press Select to enter the value and continue to the next value.
After you have entered values for each alignment setting, the transfer belt should be aligned and the printer ready to print.
Life Warning message or the 80 Belt/Fuser Exhausted message, see Replacing the fuser for instructions on replacing the fuser.
For instructions about replacing other supply items, click one of the following headings:
Replacing a toner cartridge
Replacing the oil coating roll
Replacing a photodeveloper · Replacing the fuser

Your printer monitors the toner level of your toner cartridges. When the toner is getting low, the printer displays 88 <color> Toner Low. This message indicates it is time for you to replace one or more specified toner cartridges. Press Go to clear the attendance message.
The Supplies status message appears on the second line of the display to remind you there are supplies that need attention. You can open the Supplies Menu to see which toner cartridge is low.
The printer continues to display the Supplies message until you replace the toner cartridge or until it is empty.
When the life of the toner cartridge has expired, the printer displays 88 <color> Toner Empty. You must replace the toner cartridge to continue printing.
Use the following steps or the instruction sheet supplied with the toner cartridge to replace toner cartridges.

WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.
1 Complete the steps to open the top cover.

permanently adheres the toner to the clothing. Use cold water to remove toner.
2 Pull the waste toner arm away from the photodeveloper.

Transfer belt

3 Pull the toner cartridge approximately halfway out of the printer.
4 Grasp the toner cartridge handle and continue to pull the toner cartridge out.

1 Remove the replacement toner cartridge from the packing material.

2 Gently shake the toner cartridge to distribute the toner evenly.


3 Remove the shipping tape and any additional packing material.

4 Align the toner cartridge with its slot in the printer. The toner cartridge is placed to the right of the corresponding colored label.

Colored label

5 Slide the toner cartridge in until the cartridge is fully seated.

6 Push the waste toner arm until it snaps into place over the photodeveloper.
7 Repeat Removing a toner cartridge step 2 through Installing a toner cartridge step 6 to install additional toner cartridges.
area under the cover is free of hands, clothing, and other items.

8 Close the top cover and the front door.
For instructions about replacing other supply items, click one of the following headings:
Replacing the transfer belt
Replacing the oil coating roll
Replacing a photodeveloper · Replacing the fuser


To access the printer supplies and some of the paper jam areas, open the top cover:
1 Open the front door.

2 Rotate the top cover locking lever to the left.


3 Push up on the right top cover locking button and lift at the points shown below.
For information about replacing an individual supply item or paper jams, click one of the following headings:
Replacing a photodeveloper · Replacing the fuser · Clearing paper jams

Store supplies in their original packaging until you are ready to install them.
Do not store supplies in:

After replacing the fuser or transfer belt, you must reset the maintenance counter.
If the message Did you replace Fuser? or Did you replace Belt? appears, press Go. Otherwise, use the following steps to reset the fuser or transfer belt counter.
1 Press Menu until Supplies Menu appears on the second line of the display.
1 Menu 2 Select 3
2 Press Select to open the Supplies Menu.
3 Press Menu until Replace Supplies appears on the second line of the display.
REPLACE SUPPLIES
1 Menu 2 Select 3
4 Press Select to open Replace Supplies.

5 Press Menu until Fuser appears on the second line of the display.
1 Menu 2 Select 3
6 Press Select to open the Fuser menu item.
7 Press Menu until =Replaced appears on the second line of the display.
1 Menu 2 Select 3
8 Press Select to reset the fuser counter to zero.
9 Press Go.

Previously installed memory and interface options can easily be removed by using the procedures on the following pages.
1 Turn the printer off.
2 Unplug the power cord.
3 Disconnect the parallel or Ethernet cable from the printer.
If you have any other devices connected to the printer, turn them off as well and unplug any cables going to the printer.
You must remove the system board access cover to install memory cards, a firmware card, a hard disk, or an option card.
move or lift the printer make sure you have enough people to help. Use the handholds located on the sides to lift the printer.
1 Move the printer or place it in an area that will be convenient for removing the cover and components.
You need a number 2 Phillips screwdriver to remove the cover and system board.
2 Loosen the eight screws on the cover. Do not remove the screws completely.

3 Slide the cover up and away from the printer.
WARNING: The system board access cover must be replaced before operating the printer.


Use the following illustration to locate the connector for the card you want to remove.

Optional ImageQuick™ firmware card

Complete the following steps if you need to remove a memory card. Otherwise, go to Installing the system board access cover.
1 Make sure the printer is turned off and the power cord is unplugged.
2 Follow the steps for Removing the system board access cover if it is still installed.
such as the printer frame before you touch a memory card.
3 Push the latches at each end of the connector away from the card.
The memory card moves out of the connector as the latches open.
4 Gently pull the card out.
5 Place the card into the original packaging.
If you do not have the original packaging, wrap the card in paper and store it in a box.
6 Close both latches.
7 Repeat steps 3 through 6 to remove additional memory cards.

You need a number 2 Phillips screwdriver to remove an option card.
1 Make sure the printer is turned off and the power cord is unplugged.
2 Complete the steps for Removing the system board access cover if it is still installed.
as the printer frame before you touch an option card.
3 Remove the screws securing the option card to the cover.


4 Gently pull the option card completely out.

5 Place the option card in its original packaging.
If you do not have the original packaging, wrap the option card in paper and store it in a box.
6 If you are not installing another option card in the connector, cover the opening with a blank internal print server cover.
Cover the opening to ensure proper airflow around the system board. If you do not have a blank cover, contact your service representative and request one.
1 Make sure the printer is turned off and the power cord is unplugged.
2 Complete the steps for Removing the system board access cover if it is still installed.
such as the printer frame before you touch a firmware card.
If an option card has been installed, you need to remove the option card before removing the firmware card.


3 Holding the firmware card by its sides, gently pull the card completely out.
Avoid touching the metal pins on the bottom of the card.
4 Place the firmware card in its original packaging.
If you do not have the original packaging, wrap the firmware card in paper and store it in a box.
5 If you removed an option card to access the firmware card, reinstall the option card.
1 Make sure the printer is turned off and the power cord is unplugged.
2 Complete the steps for Removing the system board access cover if it is still installed.
the printer frame before you touch a hard disk.
If an option card has been installed, you need to remove the option card before removing the hard disk.
3 Pull the hard disk out of the holes on the system board. It is attached by three posts on the mounting plate.

4 Flip the hard disk over, and then unplug the ribbon cable connector from the connector on the system board.

5 Remove the ribbon cable from the hard disk.

6 Place the hard disk in the original packaging.
If you do not have the original packaging, wrap the parts in paper and store them in a box.

After you have removed the options, complete the following steps to install the cover and system board.
You need a number 2 Phillips screwdriver to install the cover.
1 Make sure the printer is off and unplugged.
2 Align the holes on the access cover with the screws.


3 Place the cover against the printer and slide it down.

4 Tighten the eight screws.
5 Connect the printer cables and power cord, and turn the printer on.
non-ground fault interrupter (GFI) circuit.


1 Turn the printer off.
2 Unplug the power cord.
non-ground fault interrupter (GFI) circuit.
3 Disconnect the parallel or Ethernet cable from the printer.
If you have any other devices connected to the printer, turn them off and unplug any cables going to the printer.
move or lift the printer make sure you have enough people to help. Use the handholds located on the sides to lift.
4 Lift the printer and move it away from the optional drawer.


5 Lift the optional drawer.


1 Turn the printer off.
2 Open the duplex unit door.


4 Slide the duplex unit out.

5 Close the duplex unit door.

1 Turn the printer off.
2 Unplug the high capacity feeder power cord from the electrical outlet.
3 Disconnect the interface cable from the side of the high capacity feeder.
4 Roll the high capacity feeder away from the printer.
5 Remove the high capacity feeder from the guide rail.

6 Raise the guide rail and pull it away from the docking frame.
7 Remove the wrench from the holder in the high capacity feeder.

8 Remove the four screws securing the docking frame.
9 Insert the two side covers into the screw holes on the optional drawer until they snap into place.

Lexmark’s Operation ReSourceSM program lets you participate in a worldwide recycling effort at no cost to you.
Pack your old toner cartridge in the new toner cartridge shipping box. Follow the instructions in the box to send the old cartridge back to Lexmark.
You can also recycle some replacement hardware parts, such as the transfer belt and the fuser.
If a prepaid shipping label is not available for your country, contact the place where you bought your printer for additional recycling information.
cartridges from a third party. Print quality and printer reliability cannot be guaranteed if you do. The printer warranty does not cover damage caused by using refilled cartridges.

In the U.S. or Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies Dealers in your area. In other countries, contact the place where you bought your printer.
You can also visit the Lexmark online store at www.lexmark.com to order supplies. Click the Web link on the bottom of this page.
Replacing maintenance items as needed helps you maintain top performance, optimize print quality, and avoid printing problems.
When the 80 Fuser Life Warning message appears on the display, you should order a new fuser.
Use P/N 56P9900 to order a fuser for a 120 V printer. Use P/N 56P9901 to order a fuser for a 230 V printer. See Replacing the fuser for more information.
When the 85 Coating Roll Life Warning message appears on the display, you should order a new oil coating roll.
Use P/N 12N0774 to order an oil coating roll. See Replacing the oil coating roll for more information.
When the 80 Belt Life Warning message appears on the display, you should order a new fuser.
Use P/N 56P9903 to order a transfer belt. See Replacing the transfer belt for more information.

When the 88 <color> Toner Low message appears on the display, you should order a new toner cartridge. You can continue to print after the 88 <color> Toner Low message appears for a few hundred pages until the print fades or no longer prints satisfactorily, or until the 88 <color> Toner Empty message appears, at which time you must replace the toner cartridge to continue printing.
Order the appropriate toner cartridge:
Part number Toner cartridge
12N0771 Black toner cartridge
12N0770 Yellow toner cartridge
12N0768 Cyan toner cartridge
12N0769 Magenta toner cartridge
See Replacing a toner cartridge for more information.

When you call for printer service, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.
You need your printer model type and serial number. Refer to the label on the inside of the front cover for this information.
Utilities Menu. See Printing the menu settings page for more information.
For service in the U.S. or Canada, call 1-800-Lexmark (1-800-539-6275). For other countries, refer to the numbers listed on the drivers CD.

Technical support and information is available on the Web at www.lexmark.com. You can look for solutions to your printing problems using the Lexmark Technical Library, FAQs, and the Lexmark Knowledge Base. You can also contact the Customer Support Center (CSC) by e-mail.
When you contact the Lexmark CSC, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.
You need your printer model type and serial number. Refer to the label on the back of the printer near the power cord for this information.
Utilities Menu. See Printing the menu settings page for more information.

If the suggested corrective action does not fix the problem, call your service representative.
Operator panel displays only diamonds or is blank.
Menu settings changed from the operator panel have no effect.
Settings in the software application, the printer driver, or the printer utilities are overriding the settings made from the operator panel.
Problem Action

If a job did not print or incorrect characters printed, verify that the Lexmark internal print server or external print server is set up properly and the network cable is connected.
For Novell users:
For Macintosh users:

If your printer is not responding, first make sure that:
Once you’ve checked each of these, turn the printer off, wait about 10 seconds, and turn the printer back on. This often fixes the problem.
messages for more information.

If the suggested corrective action does not fix the problem, call your service representative.
Job did not print or incorrect characters printed.
Make sure Ready appears on the operator panel before you send a job to print. Press Go to return to Ready.
Make sure print media is loaded. Press Go to return to Ready.
Verify the printer is using the correct printer language.
Verify you are using the correct printer driver.
Make sure the parallel, serial, ethernet, or USB cable is firmly plugged in at the back of the printer. Make sure you are using the correct cable. Use IEEE 1284-compliant parallel cable. We recommend Lexmark part number 1329605 (10 ft) or 1427498 (20 ft). If you use RS-232 Serial, verify that a null modem cable is used.
If the printer is connected through a switch box, try a direct connection.
Verify the correct paper size is selected through the operator panel, in the printer driver, or in the software application.
Make sure PCL SmartSwitch and PS SmartSwitch are set to On.
Job did not print or incorrect characters printed (continued).
If you are using a print spooler, verify the spooler is not stalled.
If you print across a network or on a Macintosh computer, see Solving network printing problems.
Check the printer interface from the Setup Menu.
Determine which host interface you are using. Print a menu settings page to verify the current interface settings are correct. See Printing the menu settings page.
If you are using a serial interface:
Printer seems to print slowly. Make sure you select the appropriate Paper Type setting before sending a job to print.
If the Paper Type is set to Transparency, the printer adjusts the fuser temperature and slows printing to improve the print quality. After printing on this media, the printer requires additional time to warm the fuser after you select another Paper Type setting (such as Plain Paper or Letterhead).
Reduce the complexity of your print job. Eliminating the number and size of fonts, the number and complexity of images, and the number of pages in a job may increase print speed.
Set Page Protect Off from the Setup Menu. See Page Protect for more information.
Problem Action

Unexpected page breaks appear.
Increase the Print Timeout value in the Setup Menu.
Transparencies jam. If you just turned the printer on or the printer has been idle for a period of time, print on paper before trying to print on transparencies.
Disabling Power Saver may also prevent transparencies from jamming after the printer has been idle. See Power Saver for more information.
Paper is jammed in the fuser. Rotate the fuser pressure release lever down and remove the jammed paper. See Clearing paper jams for more information.
Part of the printed page was clipped or is cut off.
Make sure you have the correct size paper in the paper tray and the paper size is set correctly for the paper in the tray.
Printer is connected to the USB port, but will not print.
Make sure you are using Windows 98, Windows 2000, Windows Me, or another USB-capable operating system supported by Lexmark.
Paper does not feed properly. Make sure you’re using recommended media. Do not use 16 lb paper or paper greater than 32 lb with the duplex unit.
Make sure the adjustable guides in the paper tray are adjusted properly for the media you loaded.
Make sure the stack of media does not exceed the maximum stack height indicated on the tray.
Print media misfeeds or multiple feeds occur.
Make sure the print media you are using meets the specifications for your printer. Refer to the Card Stock & Label Guide for more information.
Flex print media before loading it in any of the paper sources.
Make sure the print media is loaded correctly.
Make sure the paper width and length guides on the paper sources are adjusted correctly.
Do not overfill the paper sources.
Do not force print media into the multipurpose feeder when you load it; otherwise, it may skew or buckle.
Remove any curled print media from paper sources.
Print media misfeeds or multiple feeds occur (continued).
Load the recommended print side correctly for the type of print media you are using. See Loading media for more information.
Load less print media in the paper sources.
Turn the print media over or around and try printing again to see if feeding improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom sheets of a ream before loading the print media.
Load a paper source only when it is empty.
Envelope misfeeds or multiple feeds occur.
Remove the stack of envelopes from the multipurpose feeder. Load one envelope, feed it through the printer, and then reload the stack of envelopes in the multipurpose feeder.
Push down the bottom plate until it locks into place. See Loading the multipurpose feeder for an illustration.
Problem Action

Job prints from the wrong paper source or on the wrong print media.
Check the Paper Type setting in the Paper Menu from the printer operator panel and in the printer driver.
Problem Action


Print is too light, or printed images or characters have voids or dropouts.
Make sure you’re using recommended paper or other media. Use media from a new package. See Media guidelines.
Make sure you have selected the correct Paper Type setting for the media you’re using.
Set Toner Darkness to 4 in the Color Menu.
Clean the LEDs. See Cleaning the LEDs.
If you suspect a toner cartridge is low on toner, remove the appropriate cartridge and gently shake it back-and-forth to distribute the toner evenly. Reinsert the cartridge and try printing the job again.
Replace the toner cartridge that matches the color on the page that is too light or not present in the void areas. See Replacing a toner cartridge.
Replace the photodevelopers. If only black print appears light, you can replace just the black photodeveloper. If one of the colors prints too light, replace all three of the color photodevelopers. See Replacing a photodeveloper.
Colored lines, streaks, or smudges appear on the printed page, or print appears blurred or unclear.
Clean the LEDs. See Cleaning the LEDs.
Remove the affected toner cartridge and gently shake it back-and-forth to distribute the toner evenly. Reinsert the cartridge and try printing the job again. See Replacing a toner cartridge.
Replace the toner cartridge that matches the color of the lines, streaks, or smudges on the page. See Replacing a toner cartridge.
Replace the photodevelopers. If only black print appears light, you can replace just the black photodeveloper. If one of the colors prints too light, replace all three of the color photodevelopers. See Replacing a photodeveloper.
Toner specks appear on the page.
Replace the oil coating roll. See Ordering supplies.
Problem Action

Toner covers the background of the page.
Make sure the affected toner cartridge is completely installed.
The page has 100% coverage of one color.
Replace the photodevelopers. If the page is black, you can replace just the black photodeveloper. If the page is another color, replace all three of the color photodevelopers. See Replacing a photodeveloper.
Light lines or streaks appear on the printed page.
Clean the LEDs. See Cleaning the LEDs.
Remove the toner cartridge that matches the color of the lines or streaks and gently shake it back and forth to distribute the toner evenly. Reinsert the toner cartridge and try printing the job again.
Replace the photodevelopers. If the problem only occurs when printing black, you can replace just the black photodeveloper. If the problem occurs when printing one of the colors, replace all three of the color photodevelopers. See Replacing a photodeveloper.
Replace the toner cartridge that matches the color of the lines or streaks on the page. See Replacing a toner cartridge.
The page is blank or one of the colors is missing.
Replace the toner cartridge that matches the missing color on the page. See Replacing a toner cartridge.
Toner smears or rubs off the page.
Make sure you’re using recommended paper or other media. Refer to the Card Stock & Label Guide for more information.
Make sure you have selected the correct Paper Type setting for the media you’re using.
You may need to replace the fuser. See Replacing the fuser.
Problem Action

Printed materials delivered by the postal service arrive with ghosting or mirror images of the text visible on the page.
When preparing printed materials for mailing:
Quality of printed transparencies is inadequate.
Make sure you’re using recommended Lexmark transparencies. See Transparencies.
Make sure you’re loading transparencies properly. See Loading transparencies
When printing transparencies, always set the Paper Type to Transparency. See Paper Type.
Set the Color Correction menu item to Vivid. See Color Correction.
Avoid getting fingerprints on transparencies before printing.
Quality of printed images is inadequate.
Set Toner Darkness to 4 in the Color Menu.
A white gap is noticeable between color fills.
Turn the printer off and back on. The printer calibrates the photodevelopers and drive gears, which may improve registration. See Print Alignment for more information.
Colors do not print as you expect.
Make sure you have selected the appropriate Color Correction and Print Mode values for the job you’re printing. See Color Menu for more information.
Problem Action


By carefully selecting print media and loading them properly, you should be able to avoid most paper jams. If jams do occur, follow the steps outlined in this section.
To resolve the paper jam messages, you must clear the jammed area and then press Go to clear the message and resume printing. The printer prints a new copy of the page that jammed if Jam Recovery is set to On or Auto; however, the Auto setting does not guarantee the page will print.
See the diagram on page 146 for the path the paper travels through the printer and options, and areas where jams may occur. The path varies depending on the paper source and output bin.
Click a message below for more information.

200 Paper Jam Check Areas A,B
200 Paper Jam Check Area D
T 2
T 3
T 4
240 Paper Jam

This message identifies the areas (A–F, MPF, or T1–T5) you need to check to remove the paper or to clear the message. The display will alternate between 200 Paper Jam <x> Pages Jammed and Check Areas A-F., T1-5, MPF:

Paper Jam message will be blank. To resolve the message, you must clear all paper from the paper path.
This message indicates a paper jam in the transfer belt, fuser, or output roller area. To clear areas A– B:
1 Complete the steps to open the top cover.

WARNING: Never touch the photodeveloper drum on the underside of the toner cartridge.


If the paper source was the multipurpose feeder, check the area between the multipurpose feeder and the transfer belt.
3 Check the fuser area and top cover for additional jams.
If there is no jam in the fuser area or top cover, close the top cover and front door, and then press Go. If a jam is present, continue with step 4.


5 Slowly pull the paper out of the fuser toward the inside of the printer.
If there is no jam in the top cover, close the top cover and front door. If a jam is present, continue with step 8.


9 Close the top cover and the front door.
10 Open the jam access door on the left side of the printer.


To prevent additional paper jams, make sure both sides of the door are closed.
13 Press Go.
Jams that cause a Check Area C message require opening the duplex jam access door. If you are printing on small paper, the following steps may not clear the jam. See Removing small size paper from the duplex unit.
1 Open the duplex jam access door on the right side of the printer.


If the paper jam message continues, check and clear all paper from the paper path.
This message indicates a paper jam in the duplex unit area. To clear area D:
1 Open the duplex jam access door on the right side of the printer.


If the paper advances out of the duplex unit, remove the jam and go to step 7. If the paper does not advance, go to step step 4.


9 Press Go.
If the paper jam message continues, check and clear all paper from the paper path.

When printing on both sides of A5 or other small size paper, you may need to partially remove the duplex unit to clear the jam.
1 Turn off the printer.
2 Open the duplex unit door.


3 Loosen the two screws shown.
4 Pull out the duplex unit far enough to see the duplex unit inlet.


6 Slide the duplex unit in.
7 Align the thumbscrews on the duplex unit with the holes in the printer.
8 Tighten the thumbscrews to secure the duplex unit.


This message indicates a jam in the top, middle, or bottom optional drawer paper path area.
1 Open the jam access door on the top optional drawer.


4 Open the jam access door on the middle optional drawer.


7 Open the jam access door on the bottom optional drawer.
9 Close the jam access door.
10 Press Go.
If the paper jam message continues, check and clear all paper from the paper path.

1 Pull the high capacity feeder away from the printer.
2 Open the jam access door on the top optional drawer.

3 Remove any jams.
4 Close the jam access door.
5 Slide the high capacity feeder until the feeder locks to the docking frame.
When the feeder is in the correct position, you hear a click.
6 Press Go.
If the paper jam message continues, check and clear all paper from the paper path.


1 Slowly pull the jam straight out of the multipurpose feeder.
If the paper will not come out, proceed with step 2.
WARNING: Do not touch, drop, or place anything on the transfer belt. Touching the surface of
the transfer belt or placing items on it may cause damage.

5 Press Go.

Jams in five areas result in a 24<x> Paper Jam message, where x represents the tray number where the jam has occurred. Paper jam messages 241–244 indicate a jam has occurred in one of the paper trays. A 249 Paper Jam Check Tray <x> message indicates a jam has occurred in the high capacity feeder. See Identifying paper jam areas for tray numbering.
1 Pull out the tray indicated on the display.


3 Push down on the remaining paper in the tray until the bottom plate clicks into place.
5 Press Go.
If the paper jam message continues, check and clear all paper from the paper path.

A 249 Paper Jam Check Tray <x> message indicates a jam has occurred in the high capacity feeder.
tray 3.
1 Open the top cover.
2 Remove the jam.

3 Close the top cover.
4 Press Go.

Need updated printer drivers or utilities.
Need to attach a serial cable to the printer.
If your printer is configured with a serial port, or you have installed an optional interface card, refer to the Setup Guide.
Cannot find the printer escape codes.
Refer to the Technical Reference available on the Lexmark Web site at www.lexmark.com.
Cannot print color. Make sure the Print Mode menu item is not set to Black and White.
Make sure you’re using a color printer driver.
Make sure color printing is selected from the printer driver.
If you are printing on a network, make sure your network settings allow you to print in color.
Cannot print the menu settings page.
Make sure the selected paper source holds A4, letter, or legal size paper. Make sure the Paper Type setting for the selected source is Plain Paper.
Cannot print using the infrared port.
Make sure neither the Infrared Port nor Infrared Buffer is set to Disabled in the Infrared Menu. Also check the Window Size and Transmit Delay settings. See Infrared Menu.
Make sure the distance between the two infrared ports is 3 m (10 ft) or less. If necessary, move the ports closer together.
Make sure no objects are between the two ports.
Make sure the computer is on a level surface.
Bright light, such as direct sunshine or nearby artificial lights, may interfere with communication. If necessary, turn off lights or close window shades or blinds.
Cannot print using the LocalTalk port.
Make sure neither LocalTalk Port nor LocalTalk Buffer is set to Disabled in the LocalTalk Menu.
Verify the printer is set up correctly in the Macintosh Chooser.
Problem Action

Cannot receive faxes. Make sure neither Fax Port nor Fax Buffer is set to Disabled in the Fax Menu.
Make sure the fax machine you have connected is a class 1 fax modem.
If power to the modem has been interrupted, complete the following steps in the order listed:
1 Turn the printer power off.
2 Turn the modem power on.
3 Turn the printer power on.
Large jobs will not collate. Reduce the complexity of your print job. Eliminate the number and size of fonts, the number and complexity of images, and the number of pages.
Add more printer memory. See Adding memory, or refer to the Setup Guide for more information.
Install an optional hard disk. See Hard disk, or refer to the Setup Guide for more information.
Transparencies curl excessively. Make sure you’re using recommended Lexmark transparencies. See Transparencies for more information.
Make sure exit tray is fully open.
Paper jam message does not clear.
To clear the paper jam messages, you must press Go. If the paper jam message continues, remove all paper from the paper path. Check both inside the printer as well as the paper source you were using. Close all doors and press Go. See Clearing paper jams for more information.
Page that jammed does not reprint after you clear the jam.
Set Jam Recovery to Auto or to On in the Setup Menu. See Auto Continue for more information.
Cannot insert a toner cartridge into the printer.
Make sure the cartridge is aligned properly and is being installed in the correct location. See Replacing a toner cartridge for more information.
Toner accumulates inside the printer.
Replace the toner cartridge that matches the color of the toner that has accumulated inside the printer. See Replacing a toner cartridge.
Problem Action

You can configure the printer several ways to let you know when it requires attention.
Menu item Function Value Result
Alarm Control Lets you establish whether the printer sounds an alarm when the printer requires operator intervention.
Off The alarm does not sound, but printing stops until the interventions are cleared.*
Single The printer stops printing, displays a message, and activates the selected alarm type. Continuous
*If multiple attendance conditions are pending, the alarm only sounds when the first message is displayed. No additional alarms sound as subsequent attendance conditions arise.
Selecting Auto Continue may affect how the printer alerts execute. This setting defines how long the printer waits after displaying a message before it resumes printing.
MarkVision™ Professional, Lexmark’s network printer management utility, indicates when it is time to replace supplies and points out actual or potential problems. When a printer needs attention, it alerts the network administrator with a detailed graphic of the printer showing the cause for the alert (for example, an empty paper tray). For more information about MarkVision Professional, refer to the drivers CD that shipped with your printer.
MarkVision Messenger lets you create Actions that execute specific commands whenever messages like Tray <x> Missing or 88 <color> Toner Low appear on the display. For example, you can create an Action that sends an e-mail to the administrator when the printer runs out of paper.
Actions can be set up to occur automatically, as well as conditionally or repeatedly. For more information about MarkVision Messenger, refer to the drivers CD that shipped with your printer.

To disable the operator panel menus so that changes cannot be made to the printer default settings:
1 Turn the printer off.
the Print and Hold function.
2 Press and hold Select and Return and turn the printer on.
3 Release the buttons when you see Performing Self Test.
Config Menu appears on the first line of the display.
4 Press Menu until you see Panel Menus, and then press Select.
Disable appears on the second line of the display.
5 Press Select.
Locking Menus appears briefly.
6 Press Menu until you see Exit Config Menus, and then press Select.
The menus are disabled. If you press Menu, the message Menus Disabled appears.
1 Repeat steps 1 through 4.
2 Press Menu until you see Enable.
3 Continue with steps 5 and 6.

Resident fonts
Your printer is equipped with resident fonts stored permanently in printer memory. Different fonts are available in PCL 6 and PostScript 3 emulations. Some of the most popular typefaces, like Courier and Times New Roman, are available for all printer languages.
The fonts in the PCL emulation are compatible with the fonts in the HP4500 and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts.
The following tables list all the fonts resident in your printer. See Printing sample fonts for instructions on how to print samples of the fonts. You can select the resident fonts from your software application, or from the operator panel if you are using PCL 6 emulation.
PCL 6 emulation PostScript 3 emulation
Antique Olive Italic AntiqueOlive-Italic
Antique Olive Bold AntiqueOlive-Bold
Arial Bold Italic Arial-BoldItalicMT
ITC Avant Garde Book AvantGarde-Book
ITC Avant Garde Book Oblique AvantGarde-BookOblique
ITC Avant Garde Demi AvantGarde-Demi
ITC Avant Garde Demi Oblique AvantGarde-DemiOblique
ITC Bookman Light Bookman-Light
ITC Bookman Light Italic Bookman-LightItalic
ITC Bookman Demi Bookman-Demi

PCL 6 emulation PostScript 3 emulation
ITC Bookman Demi Italic Bookman-DemiItalic
CourierPS Bold Oblique Courier-BoldOblique
CG Omega Bold Italic
Garamond Kursiv Halbfett Garamond-KursivHalbfett
Helvetica Light Oblique Helvetica-LightOblique
Helvetica Black Oblique Helvetica-BlackOblique
Helvetica Bold Italic Helvetica-BoldOblique
Helvetica Narrow Italic Helvetica-Narrow-Oblique
Helvetica Narrow Bold Helvetica-Narrow-Bold
Helvetica Narrow Bold Italic Helvetica-Narrow-BoldOblique
CG Times Italic Intl-CG-Times-Italic
CG Times Bold Intl-CG-Times-Bold
CG Times Bold Italic Intl-CG-Times-BoldItalic
Univers Medium Italic Intl-Univers-MediumItalic
Univers Bold Italic Intl-Univers-BoldItalic

PCL 6 emulation PostScript 3 emulation
Courier Bold Italic Intl-Courier-BoldOblique
Letter Gothic Italic LetterGothic-Slanted
Letter Gothic Bold LetterGothic-Bold
Century Schoolbook Roman NewCenturySchlbk-Roman
Century Schoolbook Italic NewCenturySchlbk-Italic
Century Schoolbook Bold NewCenturySchlbk-Bold
Century Schoolbook Bold Italic NewCenturySchlbk-BoldItalic
Palatino Bold Italic Palatino-BoldItalic
Times Bold Italic Times-BoldItalic
Times New Roman TimesNewRomanPSMT
Times New Roman Italic TimesNewRomanPS-ItalicMT
Times New Roman Bold TimesNewRomanPS-BoldMT
Times New Roman Bold Italic TimesNewRomanPS-BoldItalicMT
Univers Condensed Medium Univers-Condensed
Univers Condensed Medium Italic Univers-CondensedOblique
Univers Condensed Bold Univers-CondensedBold
Univers Condensed Bold Italic Univers-CondensedBoldOblique

PCL 6 emulation PostScript 3 emulation
ITC Zapf Chancery Medium Italic ZapfChancery-MediumItalic
ITC Zapf Dingbats ZapfDingbats

PCL 6 emulation PostScript 3 emulation

PCL 6 emulation PostScript 3 emulation
A symbol set is an encoded collection of alphabetic and numeric characters, punctuation, and special characters available in the font you select. Symbol sets support the requirements for different languages or specific applications, such as math symbols used for scientific text.
The symbol set encoding also defines which character will print for each key on the keyboard (or more specifically, for each code point). Some applications require different characters at some code points. To support multiple applications and languages, your printer has 83 symbol sets for the resident PCL 6 emulation fonts.
Not all fonts support all of the symbol sets listed in Downloadable fonts. Refer to the Technical Reference to determine which symbols sets are supported by each font name.
ABICOMP International POSTNET Bar code ISO 57: Chinese
PCL ITC Zapf Dingbats ISO 11: Swedish for Names ISO 8859-2 Latin 2
PS ITC Zapf Dingbats ISO 14: JIS ASCII ISO 8859-5 Latin/Cyrillic
PC-8 Bulgarian PC-857 Latin 5 (Turkish) Roman-9
PC-8 Danish/Norwegian (437N) PC-858 Multilingual Euro Roman Extension
Line Printer 16 · POSTNET Bar code

PC-8 Greek Alternate (437G) PC-860 Portugal Ventura ITC Zapf Dingbats
PC-8 Turkish (437T) PC-861 Iceland Ventura International
PC-8 Latin/Greek PC-863 Canadian French Ventura Math
PC-8 PC Nova PC-865 Nordic Ventura US
PC-8 Polish Mazovia PC-866 Cyrillic Windows 3.0 Latin 1
PC-8 Code Page 437 PC-869 Greece Windows 98 Cyrillic
PC-775 Baltic (PC-8 Latin 6) PC-911 Katakana Windows 98 Greek
PC-850 Multilingual PC-1004 OS/2 Windows 98 Latin 1
PC-851 Greece Math-8 Windows 98 Latin 2
PC-852 Latin 2 Greek-8 Windows 98 Latin 5
PC-853 Latin 3 (Turkish) Turkish-8 Windows 98 Latin 6 (Baltic)
You can download scalable fonts in PostScript 3 emulation and either scalable or bitmapped fonts in PCL 6 emulation. Fonts can be downloaded to printer memory, or to a flash memory option or hard disk option. Fonts downloaded to flash memory or hard disk remain in memory even after the printer language changes, the printer resets, or the printer is turned off.
Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character, including all seven Windows symbol sets.
A variety of downloadable fonts for Hebrew and Arabic are included on the CD that shipped with the printer.
Also included on the CD is the FontVision™ Management utility and screen fonts to match the resident scalable fonts. An additional 48 TrueType fonts are available on the Lexmark Web site when you register the printer.
PC-855 Cyrillic Roman-8

Printer memory
Your printer ships with at least 64MB of memory. To determine the amount of memory currently installed in your printer, select Print Menus from the Utilities Menu. The total installed memory appears on the printout. For more information about printing the menu settings page, see Printing the menu settings page.
The memory shipped in your printer and the memory options available use SDRAM DIMM memory technology. Unpredictable results may occur if you attempt to operate your printer with memory other than SDRAM DIMM memory installed.
When purchasing memory for your printer, make sure you use SDRAM DIMM memory cards that meet the following criteria:
– 100MHz or greater – 100 pin – 4KB refresh rate – Unbuffered, non ECC – x32 – 3.3 V
Your printer has three memory slots. The maximum amount of usable memory is 512MB. You may add SDRAM DIMM memory cards in any memory combination to suit your needs; however, the maximum amount of memory your printer can use is 512MB.
printer.
Lexmark offers three memory options for your printer: 64MB, 128MB and 256MB. For memory installation instructions, refer to the Setup Guide.
Additional memory lets the printer print complex jobs, collate large jobs, and operate more efficiently. You can also download fonts and macros to printer memory. However, this type of memory is temporary storage. Anything stored in printer memory is lost when the printer power is turned off.

If your printer encounters a memory shortage when trying to print a job, it may post an error message (37 Insufficient Collation Area, 37 Insufficient Defrag Memory, 38 Memory Full, or 39 Complex Page), depending on the task it is trying to complete. See Understanding printer messages for more information about these and other messages.
If these messages appear frequently, you probably want to install additional printer memory. If they only occur rarely, try reducing the following:
You may also try adjusting the following settings:
A portion of printer memory is reserved for input buffers that hold print jobs sent from your software application. Your printer has an input buffer for each interface (parallel, serial, network, LocalTalk, or infrared). You can change the amount of memory allocated to each buffer, depending on your system requirements. For more information about using printer menus to allocate memory for each interface, see Using printer menus and select the interface menu you want information about.
The size of the input buffers varies with the amount of memory installed in the printer. The following table lists the default size of the input buffers for each interface. If your printer is not using a particular interface, the allocated memory is reserved for job processing.
For more detailed information about these input buffers and memory allocation, refer to the Technical Reference.
Default input buffer size
LocalTalk port Infrared port USB port
2MB 300KB 2MB 1MB 300KB 300KB
128MB
1 1MB allocated to standard parallel port if no optional adapter is installed.
You can add optional flash memory to your printer. If you frequently download fonts, macros, forms, or symbol sets to your printer, you may want to use flash memory storage rather than RAM. Resources stored in flash memory are not lost when the printer power is turned off.

If you have a large number of permanent resources you’d like to download to your printer, you may want to install an optional hard disk. The hard disk works much like flash memory, but has a larger storage capacity for downloaded resources. You can also use the hard disk for job buffering, collating large jobs, and gathering job statistics.
For instructions on installing a hard disk, refer to the Setup Guide.
You can partition a portion of the hard disk for job buffering. In some cases, spooling jobs to a disk may decrease the time required for the printer to accept the print job data from the application. The job also remains stored on the disk until the entire job prints. Since disk memory acts as permanent storage, your jobs remain secure in the event of a power failure.
You can enable or disable job buffering for each of the available printer ports (parallel, serial, fax, network, infrared, and LocalTalk) by doing the following:
1 Using the printer operator panel or MarkVision, select Job Buffer Size under the Setup Menu.
2 Set the percentage of the disk you want to use for job buffering.
3 Press Go to return the printer to Ready status.
If you are collating a large job and printer memory is not sufficient, the printer automatically uses storage area available on an installed hard disk to finish collating the job. See Collation for more information.
You can also use an installed hard disk to gather statistics about a specified number of the most recent print jobs. The statistics include whether the job printed with or without errors, the time required to print the job, the size (in bytes) of the job, the requested paper size and paper type, the color settings used, the total number of printed pages, and the number of copies requested.
See Job Accounting for more information about setting up your printer to gather job statistics and printing the accumulated data. Or, if you’re using the MarkVision utility, refer to the MarkVision online Help or the MarkVision documentation on the drivers CD.

Use the MarkVision utility to manage the resources you store on flash memory or hard disk. MarkVision offers tools for;
For more information about the specific resource management tools that MarkVision offers, see the drivers CD or refer to the MarkVision online Help. For more information about setting passwords, refer to the Technical Reference.

Dimensions
Dimension C910 C910n C910dn
Height 497 mm (19.6 in.) 626 mm (24.6 in.) 626 mm (24.6 in.)
Width 695 mm (27.4 in.) 695 mm (27.4 in.) 695 mm (27.4 in.)
Depth 655 mm (25.8 in.) 655 mm (25.8 in.) 655 mm (25.8 in.)
Weight1 80.5 kg (177.1 lb) 99.0 kg (217.8 lb) 104.9 kg (230.8 lb)
1 Includes cartridges

1 Make sure the printer is on and the Ready message appears.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Factory Defaults, and then press Select.
4 When Restore appears, press Select. The message Restoring Factory Defaults appears followed by the Ready message.
When you select Restore:
– No other button actions are available on the operator panel while Restoring Factory Defaults appears. – All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.) – All menu settings are returned to the factory default values, except the settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, USB Menu, and the operator panel Display Language setting in the Setup Menu.
If you need more information about changing menu settings or selecting new user default settings, see Changing printer settings.

Your printer has resident fonts stored permanently its memory. Different fonts may be available in PCL and PostScript emulations.
To print samples of all the fonts currently available for your printer:
1 Make sure the printer is on and Ready appears on the display.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Print Fonts, and then press Select.
4 Press Menu to display either PCL Fonts or PS Fonts.
– Select PCL Fonts to print a listing of the fonts available in PCL emulation. – Select PS Fonts to print a listing of the fonts available in PostScript 3 emulation.
5 Press Select.
The message Printing Font List remains on the display until all pages print. The printer returns to the Ready message after the font sample list prints.
Refer to the Technical Reference on Lexmark’s Web site for more information about font and symbol set support.

The operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to clear the messages.
1 Menu 2 Select 3
Click a letter or number at the bottom of the page to locate information about a message beginning with that character.

B
G
H
Held Jobs may be lost
Install or Cancel Job
Clearing Job Accounting Stat
Invalid Network Code
Invalid Standard Network Code
Close Tray Top Cover
D
M
Disk Corrupted. Reformat?
Disk Recovery x/5 yyy%
E
No Jobs Found. Retry?

S
P
T
Print Jobs on Disk
Printing Job Accounting Stat
Y
Q
Z
Queuing and Deleting Jobs
1565 Emul Error Load Emul Option
Remove Paper
Resetting Maint Cnt Value
30 Coating Roll Missing
30 Print Unit Missing
Restore Held Jobs. Go/Stop?
32 Unsupported Cartridge
33 Tray Config Error

35 Res Save Off Deficient Memory
37 Insufficient Collation Area
37 Insufficient Defrag Memory
64 Unsupported Disk Format
4 Unsupported Firmware Card
80 Belt/Fuser Life Warning
40 Tray Size Sense Error
80 Belt Life Warning
41 Open Bin 1 Exit Tray
80 Fuser Life Warning
81 Engine Code CRC Failure
84 Print Cart Abnormal
84 All Photo Devs Exhausted
54 Network Software Error
84 Black Photo Dev Abnormal
54 Par ENA Connection Lost
84 Black Photo Dev Exhausted
54 Serial Option Error
84 Black Photo Dev Life Warning
54 Std Network Software Error
85 Coating Roll Exhausted
54 Std Par ENA Connection Lost
85 Coating Roll Life Warning
56 Parallel Port Disabled
84 Color Photo Dev Abnormal
56 Serial Port Disabled
84 Color Photo Devs Exhausted
56 Standard USB Port Disabled
84 Color Photo Dev Life Warning
56 Std Parallel Port Disabled
85 Coating Roll Exhausted
56 USB Port Disabled
85 Coating Roll Life Warning
58 Too Many Bins Attached
86 Abnormal Coating Roll
58 Too Many Disks Installed
88 Toner Empty
58 Too Many Flash Options
88 Toner Low
58 Too Many Trays Attached

The printer is activating changes made to the printer settings.
Wait for the message to clear.
Disabling operator panel menus
The specified bin is full.
Remove the stack of paper from the bin to clear the message. If you assigned the bin a name, the bin name is displayed instead of the bin number.
The printer is busy receiving, processing, or printing data.
The printer is processing a request to cancel a fax job.
Wait for the message to clear.

The printer is processing a request to cancel the current print job.
Wait for the message to clear.
Canceling a print job
The printer is requesting that a different type of paper be loaded in one of the input sources.
Change the paper type in the specified source.
Loading a paper tray; Setup Guide
The specified device is either not fully connected to the printer or is experiencing a hardware failure.

The printer is deleting all job statistics stored on the hard disk.
Wait for the message to clear.
The printer front door is open.
Close the printer front door to clear the message.
The printer side door is open.
Close the printer side door to clear the message.
The printer top door is open.
Close the printer top door to clear the message.
Closing the top cover

The high capacity feeder door is open.
Close the top cover to clear the message.
The printer is processing a copy job originating from an OptraImage™ scanner.
Wait for the message to clear.
The printer is defragmenting the flash memory to reclaim storage space occupied by deleted resources.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
The printer is requesting confirmation to delete all held jobs.

The printer is deleting one or more held jobs.
Wait for the message to clear.
The printer is responding to a request to disable the menus.
Wait for the message to clear.
operator panel.
Disabling operator panel menus
The printer has attempted a disk recovery process and cannot repair the disk.
Disk Recovery x/5 yyy%

The printer is attempting to recover the hard disk. Disk recovery takes place in five phases; the second line on the operator panel display shows the percent complete of the current phase.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
The printer is responding to a request to make the menus available to all users.
Wait for the message to clear, and then press Menu to view the menus from the operator panel.
Enabling operator panel menus
The printer is warming the fuser assembly to prepare for printing.
Wait for the message to clear.

The printer is waiting for you to enter your four-digit personal identification number (PIN).
Use the operator panel buttons to enter the PIN you identified in the driver when you sent the confidential job to the printer.
Using the Print and Hold function
The printer is processing an incoming fax.
Wait for the message to clear.
The printer is flushing corrupted print data and discarding the current print job.
Wait for the message to clear.

The printer is formatting the hard disk. When formatting takes longer than usual, the second line of the display shows the percent complete.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
The printer is formatting the flash memory.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
The counter that tracks wear on the fuser has reached its limit.
Replacing the fuser

The printer memory is too full to continue processing print jobs.
– Delete fonts, macros, and other data stored in printer memory. – Install more printer memory.
alternate on the display.
Using the Print and Hold function; 37 Insufficient Memory
An infrared interface is the active communication link.
The specified tray is either missing or not fully inserted.
Insert the specified tray completely.
Loading a paper tray

The printer is requesting that a specified device be installed so it can print a job.
The printer engine code has not been programmed or is not valid.
Call for service.
Invalid Network <x> Code
Invalid Standard Network Code
What this message means:
The code in an internal print server is not valid. The printer cannot receive and process jobs until valid code is programmed into the internal print server.
Download valid code to the printer internal print server.
Calling for service

The printer is trying to feed paper from a source it detects is empty.
Loading a paper tray
A request for a manual feed job has been sent to the printer. The printer is ready for insertion of a single sheet into the manual feed slot.
Loading the multipurpose feeder
A LocalTalk interface is the active communication link.

The printer menus are disabled. You cannot change the printer settings from the operator panel.
You can still open the Job Menu to cancel a job that is printing or to select a confidential job or a held job that you want to print. If you need access to the printer menus, contact your network administrator.
Disabling operator panel menus
An internal print server (also called an internal network adapter or INA) is being reset.
Wait for the message to clear.
A network interface is the active communication link.
A network interface is the active communication link, where represents the active communication link and represents the channel.

The four-digit personal identification number (PIN) you entered is not associated with any confidential print job.
Using the Print and Hold function
The printer is not ready to receive or process data. Someone pressed Stop to take the printer offline.
Press Go to make the printer ready to receive jobs.
A parallel interface is the active communication link.
The printer is running the series of start-up tests it performs after it is turned on.
Wait for the message to clear.

The printer is ready to receive and process data. It is reducing its electricity consumption while idle. If the printer remains inactive for the period of time specified in the Power Saver menu item (20 minutes is the factory default), the Power Saver message replaces the Ready message.
Jobs that were spooled to the hard disk before the printer was last turned off have not yet printed.
The printer is adjusting the color tables to correct variations caused by environmental conditions.
Wait for the message to clear.
Color Menu

The printer is processing or printing a test page that shows alignment values.
Wait until the page has completed printing.
Replacing the transfer belt; Print Alignment
The printer is processing or printing a directory of all files stored in flash memory or on a hard disk.
Wait for the message to clear.
Printing Font List
What this message means:
The printer is processing or printing a list of all available fonts for the specified printer language.
Wait for the message to clear.
Print Directory · Print Fonts

The printer is processing or printing all job accounting statistics stored on the hard disk.
Wait for the message to clear.
Printing Menu Settings
What this message means:
The printer is processing or printing the menu settings page.
Wait for the message to clear.
Print Menus; Printing the menu settings page
The printer is programming new code into the flash memory.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
Job Acct Stat

The printer is programming new system code.
Wait for the message to clear and the printer to reset.
WARNING: Do not turn the printer off while this message is displayed.
The printer is storing resources, such as fonts or macros, in flash memory.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.
The printer is storing resources, such as fonts or macros, on the hard disk.
Wait for the message to clear.
WARNING: Do not turn the printer off while this message is displayed.

An error occurred while the printer was programming code into memory.
Correct the problem specified on the second line of the display:
P105 A network file was used to program a non-network printer, or a non-network file was used to program a network printer.
P109 An update file was used to program the printer, but the information did not fit within the space allocated in the Master Boot Record.
P112 An upddle.fls file was used to update the DLE code on a printer with a firmware card installed, but the DLE was not found on the firmware card.
P200 No firmware card is installed.
The printer is deleting one or more held jobs and sending one or more jobs to print.
Wait for the message to clear.
Using the Print and Hold function
The printer is sending one or more held jobs to print.
Wait for the message to clear.
Using the Print and Hold function

The printer is ready to receive and process print jobs.
Send a job to print.
The printer is in Hex Trace mode and is ready to receive and process print jobs.
The specified output bin, or bins, is full.
Remove the stack of paper from the specified bin(s) to clear the message.
The printer is resetting the counter that tracks wear on the fuser.
Wait for the message to clear.

The printer is resetting to the current default settings. Any active print jobs are canceled.
Wait for the message to clear.
Restore Held Jobs. Go/Stop?
What this message means:
Someone reset the printer or turned it on, and the printer detects Print and Hold jobs stored on the hard disk.
Using the Print and Hold function
Changing printer settings

The printer is restoring the factory default printer settings. When factory default settings are restored:
Wait for the message to clear.
Restoring factory default settings
The printer is restoring held jobs from the hard disk.
Wait for the message to clear.
Using the Print and Hold function
A serial interface is the active communication link.

The standard bin is full.
Remove the stack of paper in the bin to clear the message.
At least one of the printer supplies requires attention. For example, you may have a toner cartridge that is low on toner.
Press Menu to open the Supplies Menu and identify which supply item needs replacing. Replace the appropriate printer supplies.
The specified tray is out of paper.
Load paper in the tray to clear the message.
Loading a paper tray

The specified tray is low on paper.
Add paper to the tray to clear the message.
Loading a paper tray
The specified tray is either missing or not fully inserted.
Insert the tray completely.
Loading a paper tray
The printer detects an unsupported disk.
The printer is processing data through the specified USB port.

The printer has received a page of data to print but is waiting for an End of Job command, a Form Feed command, or additional data.
Canceling a print job
The download emulator version on the firmware card does not match the printer code version.
This error can occur if you update printer firmware or move a firmware card from one printer to another.
The printer automatically clears the message in 30 seconds, and then disables the download emulator on the firmware card.
Download the correct download emulator version from Lexmark’s Web site.
The printer detects a paper jam.
Clear the paper path.
Clearing paper jams

The oil coating roll is either missing or incorrectly installed.
Correctly install the oil coating roll to clear the message and continue printing.
Replacing the oil coating roll
One or more of the color print units is either missing or incorrectly installed.
Correctly install the color print units to clear the message and continue printing.
Replacing a toner cartridge; Replacing a photodeveloper
The printer detects an unsupported toner cartridge.

The optional Heavy Media tray is inserted into any tray location except Tray 1.
Remove the Heavy Media Tray from the invalid location to clear the message.
The printer has determined that the length of the paper in the source specified on the second line of the display is too short to print the formatted data.
The printer lacks the memory needed to enable Resource Save. This message usually indicates too much memory is allocated for one or more of the printer link buffers.
– Make sure the link buffers are set to Auto, and exit the menus to activate the link buffer changes. – When Ready is displayed, enable Resource Save from the Setup Menu.

The printer memory (or hard disk, if installed) does not have the free space necessary to collate the print job.
Canceling a print job
The printer cannot defragment flash memory, because the printer memory used to store undeleted flash resources is full.

The printer memory is full and cannot continue processing current print jobs.
– Delete fonts, macros, and other data in printer memory. – Install additional printer memory.
alternate on the display.
Using the Print and Hold function; Held Jobs may be lost
The printer is processing data, but the memory used to store pages is full.
– Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded fonts or macros. – Install additional printer memory.
Canceling a print job

The page may not print correctly because the print information on the page is too complex.
– Reduce the complexity of the page by reducing the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros. – Set Page Protect to On in the Setup Menu. – Install additional printer memory.
4<x> Unsupported Firmware Card
What this message means:
The printer detects an unsupported version of firmware on the installed firmware card.
Setup Menu · Setup Guide

The high capacity feeder detects an error in the size sensing mechanism.
The printer wants to send paper to the Bin 1 output tray, but the tray is closed.
The printer detects defective flash memory.
Press Go to clear the message and continue printing. You must install different flash memory before you can download any resources to flash.

There is not enough free space in the flash memory to store the data you are trying to download.
The printer detects unformatted flash memory.
The printer has detected a serial interface error on a serial port.

54 Std Network Software Error
The printer cannot establish communications with an installed network port.
54 Par <x> ENA Connection Lost
The printer has lost the connection to an external print server (also called an external network adapter or ENA).
Data has been sent to the printer through a serial port, but the serial port is disabled.
Serial Buffer

56 Std Parallel Port Disabled
Data has been sent to the printer through a parallel port, but the parallel port is disabled.
56 USB Port <x> Disabled
56 Standard USB Port Disabled
What this message means:
Data has been sent to the printer through a USB port, but the USB port is disabled.
Parallel Buffer · USB Buffer

Turn off and unplug the printer. Remove or reconfigure the output bins. Plug in the printer and turn it on.
non-ground fault interrupter (GFI) circuit.
Too many hard disks are installed. The printer only supports one hard disk at a time.
Turn off and unplug the printer. Remove the excess hard disks. Plug in the printer and turn it on.
non-ground fault interrupter (GFI) circuit.
Removing memory and network options

Too many flash memory options are installed.
Turn off and unplug the printer. Remove the excess flash memory. Plug in the printer and turn it on.
non-ground fault interrupter (GFI) circuit.
Removing memory and network options
Too many drawers with matching trays are installed.
Turn off and unplug the printer. Remove the additional drawers. Plug in the printer and turn it on.
non-ground fault interrupter (GFI) circuit.
Setup Guide

The printer detects a defective hard disk.
62 Disk Full
What this message means:
There is not enough memory on the hard disk to store the data sent to the printer.
The printer detects an unformatted hard disk.
Setup Guide · Format Disk

The printer detects an unsupported disk format.
The transfer belt has reached its end of life.
Replacing the transfer belt
The transfer belt and fuser have reached their end of life.
Replacing the transfer belt; Replacing the fuser

The transfer belt and fuser are nearing their end of life. If you do not have a transfer belt and fuser on hand, order them now. You can print approximately 500 pages before the 80 Belt/ Fuser Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the transfer belt and fuser.
Replacing the transfer belt; Replacing the fuser
The transfer belt is nearing its end of life. If you do not have a transfer belt on hand, order one now. You can print approximately 500 pages before the 80 Belt Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the transfer belt.
Replacing the transfer belt

The fuser has reached its end of life.
80 Fuser Life Warning
What this message means:
The fuser is nearing its end of life. If you do not have a fuser on hand, order one now. You can print approximately 500 pages before the 80 Fuser Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the fuser.
81 Engine Code CRC Failure
What this message means:
Microcode in the engine flash code module has failed a system check.
Press Go to clear the message and discard the code. Retransmit the microcode data from the host computer.
Replacing the fuser · Replacing the fuser

The printer has detected an abnormal photodeveloper.
Install a new photodeveloper to clear the message and continue printing.
84 All Photo Devs Exhausted
What this message means:
All of the photodevelopers have reached their end of life.
84 Black Photo Dev Abnormal
What this message means:
The printer has detected an abnormal black photodeveloper.
Install a new black photodeveloper to clear the message and continue printing.
Replacing a photodeveloper · Replacing a photodeveloper · Replacing a photodeveloper

The black photodeveloper has reached its end of life.
84 Black Photo Dev Life Warning
What this message means:
The black photodeveloper is nearing its end of life. If you do not have a black photodeveloper kit on hand, order one now. You can print approximately 100 pages before the 84 Black Photo Dev Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the photodeveloper.
Replacing a photodeveloper · Replacing a photodeveloper

The printer has detected an abnormal color photodeveloper.
Install a new color photodeveloper to clear the message and continue printing.
84 Color Photo Devs Exhausted
What this message means:
The color photodevelopers have reached the end of their lives.
Replacing a photodeveloper · Replacing a photodeveloper

The color photodevelopers are nearing the end of their lives. If you do not have a new color photodeveloper kit, order one now. You can print approximately 100 pages before the 84 Color Photo Devs Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the photodevelopers.
cannot order them separately.
85 Coating Roll Exhausted
What this message means:
The oil coating roll has reached its end of life.
Replacing the oil coating roll
Replacing a photodeveloper

The oil coating roll is nearing its end of life. If you do not have an oil coating roll on hand, order one now. You can print approximately 500 pages before the 85 Coating Roll Exhausted message appears.
Press Go to clear the message and continue printing. The Supplies message is displayed until you replace the oil coating roll.
Replacing the oil coating roll
The printer has detected an abnormal coating roll.
Install a normal coating roll to clear the message and continue printing.
Replacing the oil coating roll
The printer has ceased operating because the specified toner cartridge is empty. You cannot print until you replace the specified toner cartridge.
Install a new toner cartridge.
Replacing a toner cartridge

The printer has detected that the toner supply in the specified cartridge is low. If you do not have the specified toner cartridge, order one now. You can print approximately 250 more pages before the cartridge becomes empty.
Replacing a toner cartridge
Messages 900–999 relate to printer problems that may require service.
Turn the printer off and check all cable connections. Turn the printer back on. If the service message recurs, call for service and report the message number and description of the problem.
Calling for service


Select a menu from the following list for more information. Or, click a letter in the index at the bottom of the page to find a specific menu item that starts with that letter.
Click here for a one-page overview of all the menus and their menu items.
Select a menu or menu item for more details.
Finishing Menu Duplex Duplex Bind Copies Blank Pages Collation Separator Sheets Separator Source Multipage Print Multipage Order Multipage View Multipage Border
Serial Menu PCL SmartSwitch PS SmartSwitch NPA Mode Serial Buffer Job Buffering RS-232/RS-422 RS-422 Polarity Serial Protocol Robust XON Baud Data Bits Parity Honor DSR Network Menu PCL SmartSwitch PS SmartSwitch MAC Binary PS NPA Mode Network Buffer Job Buffering Network Setup Std Net Setup
Job Menu Reset Printer Cancel Fax Confidential Job Held Jobs
Paper Menu Paper Source Paper Size Paper Type Custom Types Configure Bins Assign Type/Bin Substitute Size Configure MP Paper Weight Paper Loading Universal Setup
PCL Emul Menu Font Source Font Name Point Size Pitch Symbol Set Orientation Lines per Page A4 Width Auto CR after LF Auto LF after CR Tray Renumber
Supplies Menu Belt Black Photo Dev Coating Roll Color Photo Dev Toner Fuser Replace Supplies Supplies Life
LocalTalk Menu LocalTalk Port PCL SmartSwitch PS SmartSwitch NPA Mode LocalTalk Buffer Job Buffering NPA Hosts LocalTalk Name LocalTalk Addr LocalTalk Zone
USB Menu PCL SmartSwitch PS SmartSwitch MAC Binary PS NPA Mode USB Buffer Job Buffering
Setup Menu Printer Language Printer Usage Power Saver Resource Save Download Target Print Timeout Auto Continue Wait Timeout Jam Recovery Page Protect Display Language Alarm Control Job Accounting Job Acct Limit
Parallel Menu PCL SmartSwitch PS SmartSwitch MAC Binary PS NPA Mode Parallel Buffer Job Buffering Advanced Status Protocol Honor Init Parallel Mode 1 Parallel Mode 2
PostScript Menu Print PS Error Font Priority Image Smoothing
Utilities Menu Color Samples Print Alignment Print Menus Print Net Setup Print Fonts Print Directory Factory Defaults Format Flash Defragment Flash Format Disk Job Acct Stat Hex Trace
Infrared Menu Infrared Port PCL SmartSwitch PS SmartSwitch NPA Mode Infrared Buffer Job Buffering Window Size Transmit Delay Max Baud Rate
Color Menu Color Correction Manual Color Print Mode Toner Darkness

E
F
Auto CR after LF
Auto LF after CR
G
H
J
D

NPA Mode
Infrared Menu LocalTalk Menu Network Menu Parallel Menu Serial Menu USB Menu
Infrared Menu LocalTalk Menu Network Menu Parallel Menu Serial Menu USB Menu
K
P
M
Mac Binary PS
Network Menu Parallel Menu USB Menu
Infrared Menu LocalTalk Menu Network Menu Parallel Menu Serial Menu USB Menu

Print Net Setup
U
PS SmartSwitch
Infrared Menu LocalTalk Menu Network Menu Parallel Menu Serial Menu USB Menu
W
R
Y
Z
RS-232/RS-422
S

Use the Color Menu to adjust print quality and customize color printing.
Select a menu item for more details:
To adjust the printed color to better match the colors of other output devices or standard color systems.
Auto* Applies different color correction to each object on the printed page depending upon the type of object and how the color for each object is specified.
Vivid Applies a color correction algorithm that produces brighter, more saturated colors.
Off No color correction is implemented.
CMYK Applies color correction to approximate SWOP color output.
Manual Similar to Auto. Lets users customize color correction output for each type of object on the page. See “Manual Color” on page 240 for details.
Display Applies color correction to approximate the colors on a computer display.

To let users customize color correction output from the operator panel.
RGB Image Vivid: Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.
sRGB Display*: Applies color correction to produce output that approximates the colors displayed on a computer monitor.
sRGB Vivid: Increases color saturation for the sRGB Display color correction.
Off: No color correction is implemented.
CMYK Image US CMYK: Applies color correction to approximate SWOP color output.
Euro CMYK*: Applies color correction to approximate EuroScale color output.
Vivid: Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.
Vivid CMYK: Increases color saturation for the US CMYK color correction.
Off: No color correction is implemented.
CMYK Text US CMYK
CMYK Graphics US CMYK

To determine whether images are printed in a monochrome grayscale or in color.
Toner Darkness
Purpose:
To lighten or darken text images, or conserve toner.
1–4 (4*) 1 is lightest; 4 is darkest.
Select a lower value for lighter grayscale images. Select a higher value for darker grayscale images. Select a value of less than 4 to conserve toner.
Color* · Black & White

Use the Finishing Menu to define how the printer delivers the printed output.
Select a menu item for more details:
To specify whether to include application-generated blank pages as part of your printed output.
Do Not Print* Does not print application-generated blank pages as part of your job.
Print Prints application-generated blank pages as part of your job.

To keep the pages of a print job stacked in sequence, particularly when printing multiple copies of the job.
Off* Prints each page of a job the number of times specified by the Copies menu item. For example, if you set Copies to 2 and send three pages to print, the printer prints page 1, page 1, page 2, page 2, page 3, page 3.
On Prints entire job the number of times specified by the Copies menu item. For example, if you set Copies to 2 and send three pages to print, the printer prints page 1, page 2, page 3, page 1, page 2, page 3.
To set the number of copies you want for the printer default value. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always override values selected from the operator panel.)
1...999 (1*)
Duplex
Purpose:
To set duplexing as the default for all print jobs. (Select Duplex from the printer driver to duplex only specific jobs.)
Off* Prints on one side of the paper.
On Prints on both sides of the paper.
Collation · Duplex Bind

To define the way to bind duplexed pages, and how the printing on the back of the sheet (even- numbered pages) is oriented in relation to the printing on the front (odd-numbered pages).
Long Edge* Assumes binding along the long end of the page (left edge for portrait orientation and top edge for landscape orientation).
Short Edge Assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation).
Multipage Border
Purpose:
To print a border around each page image when using Multipage Print.
None* Does not print a border around each page image.
Solid Prints a solid line border around each page image.
Duplex · Multipage Print

To determine the positioning of multiple page images when using Multipage Print. The positioning depends on the number of images and whether the images are portrait or landscape in orientation.
For example, if you select 4-Up multipage printing and portrait orientation, the results differ depending on the Multipage Order value you select:
Reverse Vertical Order Reverse Horizontal
Horizontal Order Vertical Order
page 1 page 2
page 1 page 3
page 2 page 1
page 3 page 1
page 4 page 3
page 4 page 2
page 3 page 4
page 2 page 4
See also:

To print multiple page images on one side of a sheet of paper. Also called n-up or Paper Saver.
Off* Prints 1 page image per side. 6 Up Prints 6 page images per side.
2 Up Prints 2 page images per side. 9 Up Prints 9 page images per side.
3 Up Prints 3 page images per side. 12 Up Prints 12 page images per side.
4 Up Prints 4 page images per side. 16 Up Prints 16 page images per side.
Multipage Border; Multipage Order; Multipage View
To determine the orientation of a multipage sheet.
Auto* Lets the printer choose between portrait and landscape orientation.
Long Edge Sets the long edge of the paper as the top of the page (landscape).
Short Edge Sets the short edge of the paper as the top of the page (portrait).
Multipage Print

To insert blank separator sheets between jobs, between multiple copies of a job, or between each page of a job.
None* Does not insert separator sheets.
Between Copies Inserts a blank sheet between each copy of a job. If Collation is Off, a blank page is inserted between each set of printed pages (all page 1’s, all page 2’s, and so on). If Collation is On, a blank page is inserted between each collated copy of the job.
Between Jobs Inserts a blank sheet between jobs.
Between Pages Inserts a blank sheet between each page of a job. This is useful if you are printing transparencies or want to insert blank pages in a document for notes.
Separator Source; Collation
To specify the paper source that holds separator sheets.
Tray <x> (Tray 1*) Selects separator sheets from the specified tray.
MP Feeder Selects separator sheets from the multipurpose feeder. (You must also set Configure MP to Cassette.)
Separator Sheets; Configure MP

Use the Infrared Menu to change printer settings affecting jobs sent to the printer through an infrared port.
Select a menu item for more details:

To configure the size of the infrared input buffer.
Disabled Disables job buffering. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates the Infrared Buffer size (recommended setting).
36K to maximum size allowed
User specifies the Infrared Buffer size. The maximum size setting depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Infrared Buffer size, disable or reduce the size of the parallel, serial, network, LocalTalk, and USB buffers.
Infrared Port
Purpose:
To activate the infrared port.
Disabled* Disables the infrared port and all other menu items in the Infrared Menu.
IR Option <x> Activates the specified infrared port.
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.
Resource Save

To specify the rate at which data can be received through the infrared port.
The maximum baud possible for both the printer and the infrared adapter is automatically set during a power on reset. However, if your printer is situated in a bright or highly reflective environment, you may experience intermittent communication problems. If you do, select a lower baud for the infrared connection.
To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
Changing this menu item automatically resets the printer.

To configure the printer so it automatically switches to PCL emulation when a print job received through the infrared port requires it, regardless of the default printer language.
On* Printer examines the data on the infrared interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language
To configure the printer so it automatically switches to PostScript emulation when a print job received through the infrared port requires it, regardless of the default printer language.
On* Printer examines data on the infrared interface and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language

To define the amount of time, in seconds, the printer must wait before transmitting meaningful infrared data to the host computer, as well as the amount of time the printer requests that the host computer wait before transmitting infrared data.
Auto* Printer sets the Transmit Delay value during a power-on reset to maximize link performance (recommended).
None No delay is imposed by the printer. However, not all host computers can communicate without some transmission delays.
1...15 User selects a Transmit Delay value between 1 and 15 seconds. If you have trouble printing using the infrared port, selecting a high Transmit Delay value, such as 15, may resolve the problem.
To specify the maximum number of infrared frames the printer can receive before sending an acknowledgment to the host computer.
Auto* Printer sets the Window Size value during a power-on reset to maximize link performance (recommended).
1 User sets the Window Size to one frame (1). If you have trouble printing using the infrared port, changing the Window Size menu item to 1 may resolve the problem.

The Job Menu is only available when the printer is busy processing or printing a job, when a printer message is displayed, or when the printer is in Hex Trace mode. Press Menu to open the Job Menu.
Select a menu item for more details:
To cancel outgoing faxes before they are transmitted or to cancel incoming faxes before they finish printing.
R Cancels an incoming fax. When the fax number for the sending machine is displayed, press Select to cancel the incoming fax.
D Cancels an outgoing fax. When the fax number for the receiving machine is displayed, press Select to cancel the fax job. If the telephone number of the fax you want to cancel is not displayed, use the Menu button to scroll through the list. The printer can display up to five outgoing fax numbers in the outgoing fax queue. When more than five faxes are in the queue, the next fax job appears on the display as an outgoing fax is transmitted or canceled.
To print confidential jobs stored in printer memory. (When the Confidential Job prints, it is automatically deleted from printer memory.)
First enter the Personal Identification Number (PIN) associated with your Confidential Job:
Enter PIN Use the operator panel buttons to enter the PIN associated with your Confidential Job.

Then select a value:
Print All Jobs Prints all jobs associated with your PIN.
Print A Job Prints the specified Confidential Job. Press Menu to scroll through the list of confidential jobs associated with your PIN. Press Select to print a specific job.
Delete All Jobs Deletes all jobs associated with your PIN.
Delete A Job Deletes the specified Confidential Job. Press Menu to scroll through the list of Confidential Jobs associated with your PIN. Press Select to delete a specific job.
Copies Determines the number of copies printed for each Confidential Job. Press Menu to scroll through the list of Confidential Jobs associated with your PIN. Press Select to specify the job you want to print. Press Menu to increase or decrease the number of copies, and then press Select.
To print Reserve Print, Repeat Print, or Verify Print jobs stored in printer memory.
Print All Jobs Prints all held jobs.
Print A Job Prints the specified held job. Press Menu to scroll through the list of held jobs. Press Select to print the specific job.
Delete All Jobs Deletes all held jobs.
Delete A Job Deletes the designated held job. Press Menu to scroll through the list of held jobs. Press Select to delete the job.
Copies Determines the number of copies for each held job. Press Menu to scroll through the list of held jobs. Press Select to specify the job you want to print. Press Menu to increase or decrease the number of copies, and then press Select.
To reset the printer to the user default value for each menu item, delete all downloaded resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface link buffer.
are using.

Use the LocalTalk Menu to change printer settings affecting jobs sent to the printer through a LocalTalk port.
Select a menu item for more details:
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer the print job to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.

To identify the LocalTalk Node number assigned to the printer. This menu item cannot be modified through the operator panel.
To configure the size of the LocalTalk input buffer.
Disabled Disables job buffering. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates LocalTalk Buffer size (recommended).
6K to maximum size allowed
User specifies the LocalTalk Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the LocalTalk Buffer size, disable or reduce the size of the parallel, serial, network, infrared, and USB buffers.
LocalTalk Name
Purpose:
To identify the printer model name stored in printer memory. This menu item cannot be modified through the operator panel.
To activate the LocalTalk port.
Disabled* Disables the LocalTalk port and all other menu items in the LocalTalk Menu.
LTalk Option <x> Activates the specified LocalTalk port.
Resource Save

To identify the LocalTalk Zone provided by the LocalTalk network. This menu item cannot be modified through the operator panel.
To specify the maximum number of NPA hosts that can register for NPA alerts.
1...10 (2*)
To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.

To configure the printer so it automatically switches to PCL emulation when a print job received through the LocalTalk port requires it, regardless of the default printer language.
On* Printer examines data on the LocalTalk interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language
To configure the printer so it automatically switches to PostScript emulation when a print job received through the LocalTalk port requires it, regardless of the default printer language.
On* Printer examines data on the LocalTalk interface and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language

Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network Opt ).
Select a menu item for more details:
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.

To configure the printer to process Macintosh binary PostScript print jobs.
On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems.
To configure the size of the network input buffer.
Auto* Printer automatically calculates the Network Buffer size (recommended setting).
3K to maximum size allowed
User specifies the Network Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel, serial, infrared, LocalTalk, and USB buffers.
Network <x> Setup
Purpose:
To configure an internal print server.
Values for this menu item are supplied by the specific print server. Select the menu item to see the available values.
Resource Save

To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
To configure the printer so it automatically switches to PCL emulation when a print job received through the network port requires it, regardless of the default printer language.
On* Printer examines data on the network interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language

To configure the printer so it automatically switches to PostScript emulation when a print job received through the network port requires it, regardless of the default printer language.
On* Printer examines data on the network interface connection and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language
To configure an internal print server.
Values for this menu item are supplied by the specific print server. Select the menu item to see the available values.

Use the Paper Menu to define the paper loaded in each paper tray and the default paper source and output bin.
Select a menu item for more details:
To send print jobs to a specific output bin based on the requested paper type.
Plain Paper Bin Envelope Bin
Card Stock Bin Letterhead Bin
Bond Bin Preprinted Bin
Glossy Paper Bin Colored Bin
Labels Bin Custom <x> Bin (where <x> represents 1 through 6)
name is truncated to 14 characters. If two or more bins share the same name, the name only appears once in the Assign Type/Bin value list.

To determine which output bin(s) the printer uses for a particular job.
Mailbox* Sends print jobs to the output bin designated for that user.
Mail Overflow Sends print jobs to the output bin designated for that user until it is full, and then sends jobs to the designated overflow bin.
Type Assignment Sends each job to the output bin specified for that paper type.
To determine when the printer selects paper loaded in the multipurpose feeder.
Cassette* Printer treats the multipurpose feeder like any other paper tray. If a print job requests a paper size or type that is only loaded in the multipurpose feeder, the printer pulls paper from the multipurpose feeder for the job.
Manual Printer treats the multipurpose feeder like a manual feed tray, and displays Load Manual when you need to insert a single sheet of paper in the feeder.
First Printer pulls paper from the multipurpose feeder until it is empty, regardless of the paper source or paper size requested for the job.
To specify the kind of paper associated with each of the Custom Types available in the Paper Type menu item.
user-defined name is truncated to 14 characters. If two or more custom types share the same name, the name only appears once in the Custom Types value list.
Paper* Glossy Paper · Card Stock Labels · Transparency Envelope

To properly handle preprinted paper loaded in a tray, whether the job is a duplexed job or a single- sided job.
First select a paper type:
Bond Loading Colored Loading Ltrhead Loading
Glossy Loading Custom <x> Loading Preprint Loading
Then select a value:
Duplex Notifies the printer that the specified paper type is loaded properly for duplex printing. If the printer receives a single-sided job using that paper type, the printer inserts blank pages as necessary to print the job properly on preprinted forms. This setting may slow single-sided printing.
Off* Printer assumes preprinted material is loaded for single-sided printing. Duplexed jobs may not print properly.
The name is truncated to 14 characters.
To identify the default paper size for each paper source.
First select a paper source:
Then select a value (*denotes country-specific factory default values):
Letter* A4* A3 7 3/4 Envelope 11 x 17
Legal A5 9 Envelope DL Envelope* Folio
Executive JIS B4 Other Envelope C5 Envelope
Statement JIS B5 10* Envelope* B5 Envelope
Universal Select Universal when you load paper that does not match any of the other available sizes. The printer automatically formats the page for the maximum possible size. You can then set the actual page size from your application software.

To identify the default paper source.
Tray <x> (Tray 1*)
If you loaded the same size and type of paper in two paper sources (and the Paper Size and Paper Type menu items are correctly set), the trays are automatically linked. When one paper source is empty, paper automatically feeds from the next linked source.
To identify the type of paper installed in each paper source.
First select a paper source:
Tray <x> Type MP Feeder Type
Manual Pap Type Manual Env Type
Then select a value:
Plain Paper Labels Preprinted Envelope
Card Stock Bond Custom Type <x> Colored Paper
Transparency Letterhead Glossy Paper
The Paper Type default for each envelope source is Envelope. The Paper Type default for each paper tray is as follows:
Tray 1–Plain Paper Tray 4–Custom Type 4
Tray 2–Custom Type 2 Tray 5–Custom Type 5
Tray 3–Custom Type 3 Manual Pap Type–Plain Paper
user-defined name is truncated to 14 characters. If two or more custom types share the same name, the name only appears once in the Paper Type value list.
MP Feeder · Manual Paper · Manual Env

Use this menu item to:
Paper Weight
Purpose:
To identify the relative weight of the paper loaded in a specific source and ensure that the toner adheres properly to the printed page.
First select a paper type:
Plain Weight Preprint Weight Bond Weight
Ltrhead Weight Colored Weight Custom <x> Weight
Then select a value:
The name is truncated to 14 characters.

To have the printer substitute the specified paper size if the requested size is not loaded.
Off Printer prompts the user to load the requested paper size.
Statement/A5 Prints A5 size jobs on statement size paper if only statement size paper is loaded, and prints statement size jobs on A5 paper if only A5 paper is loaded.
11x17/A3 Prints A3 size jobs on 11x17 size paper if only 11x17 size paper is loaded, and prints 11x17 size jobs on A3 size paper if only A3 size paper is loaded.
Letter/A4 Prints A4 size jobs on letter size paper if only letter size paper is loaded, and prints letter size jobs on A4 size paper if only A4 size paper is loaded.
All Listed* Substitutes Letter/A4.
To determine the default size when the Paper Size setting for a tray or feeder is Universal.
First select a unit of measure (* denotes a country-specific factory default value):
Then select the values:
Portrait Width =3.00–17.00 in. =76–432 mm
(11.69 in.*) (297 mm*)
Portrait Height =3.00–17.00 in. =76–432 mm
(17.00 in.*) (432 mm*)
Feed Direction =Short Edge*
Inches* · Millimeters* · =Long Edge

Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel port (either Std Parallel or Parallel Opt ).
Select a menu item for more details:
To enable bidirectional communication through the parallel port.
Off Disables parallel port negotiation.
On* Enables bidirectional communication through the parallel interface.

To determine whether the printer honors hardware initialization requests from the computer. The computer requests initialization by activating the INIT signal on the parallel interface. Many personal computers activate the INIT signal each time the computer is turned on and off.
Off* Printer does not honor hardware initialization requests from the computer.
On Printer honors hardware initialization requests from the computer.
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.
To configure the printer to process Macintosh binary PostScript print jobs.
On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems.

To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines data and determines the format and then processes it appropriately.
To configure the size of the parallel input buffer.
Disabled Disables job buffering. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates the Parallel Buffer size (recommended setting).
3K to maximum size allowed
User specifies the Parallel Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Parallel Buffer size, disable or reduce the size of the serial, infrared, LocalTalk, and USB buffers.
Resource Save

To control the pull-up resistors on the parallel port signals. This menu item is useful for personal computers that have open collector outputs on the parallel port signals.
On Disables the resistors.
Off* Enables the resistors.
To determine whether the parallel port data is sampled on the leading or trailing edge of strobe.
On* Samples parallel port data on the leading edge of strobe.
Off Samples parallel port data on the trailing edge of strobe.
To configure the printer so it automatically switches to PCL emulation when a print job received through the parallel port requires it, regardless of the default printer language.
On* Printer examines data on the parallel interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
Printer Language; PS SmartSwitch

To configure the printer so it automatically switches to PostScript emulation when a print job received through the parallel port requires it, regardless of the default printer language.
On* Printer examines data on the parallel interface and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language
To specify the parallel interface protocol.
Standard May resolve some parallel interface problems.
Fastbytes* Provides compatibility with most existing parallel interface implementations (recommended setting).
Technical Reference

Use the PCL Emul Menu to change printer settings that only affect jobs using the PCL emulation printer language.
Select a menu item for more details:
To select the width of the logical page for A4 size paper.
198 mm* Makes the logical page compatible with the Hewlett-Packard LaserJet 5 Printer.
203 mm Makes the logical page wide enough to print eighty 10-pitch characters.

To specify whether the printer automatically performs a carriage return after a line feed control command.
Off* Printer does not perform a carriage return after a line feed control command.
On Printer performs a carriage return after a line feed control command.
To specify whether the printer automatically performs a line feed after a carriage return control command.
Off* Printer does not perform a line feed after a carriage return control command.
On Printer performs a line feed after a carriage return control command.
To choose a specific font from the specified font source.
The font name and font ID for all fonts in the selected font source are displayed. The font source abbreviation is R for resident, F for flash, K for disk, and D for download.
R0 Courier 10* · Font Source

To determine the set of fonts displayed in the Font Name menu item.
Resident* Displays all fonts resident in printer RAM when the printer ships from the factory.
Download Displays all fonts downloaded to printer RAM.
Flash Displays all fonts stored in flash memory.
Disk Displays all fonts stored on the printer hard disk.
All Displays all fonts available to the printer from all sources.
Lines per Page
Purpose:
To determine the number of lines that print on each page.
1...255
60* (country-specific factory default values)
64* (country-specific factory default values)
The printer sets the amount of space between each line (vertical line spacing) based on the Lines per Page, Paper Size, and Orientation menu items. Select the correct Paper Size and Orientation before changing Lines per Page.
Orientation; Paper Size
Font Name

To determine how text and graphics are oriented on the page.
Portrait* Prints text and graphics parallel to the short edge of the paper.
Landscape Prints text and graphics parallel to the long edge of the paper.
To specify the font pitch for scalable monospaced fonts.
0.08...100 (in increments of 0.01 cpi)
Pitch refers to the number of fixed-space characters in a horizontal inch of type. You can select a pitch from 0.08 to 100 characters per inch (cpi) in increments of 0.01 cpi. For nonscalable monospaced fonts, the pitch is displayed, but cannot be changed.
To change the point size for scalable typographic fonts.
1...1008 (in increments of 0.25 points)
Point size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch. You can select point sizes from 1 to 1008 in increments of 0.25 points.
10* · 12*

To choose a symbol set for a specified font name.
PC-8* (country-specific factory default values)
PC-850* (country-specific factory default values)
A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols used when printing with a selected font. Symbol sets support the different requirements for languages or specific applications, such as math symbols for scientific text. Only the symbol sets supported for the selected font name are displayed.
Tray Renumber
Purpose:
To configure your printer to work with printer drivers or applications that use different source assignments for the paper trays.
First select a paper source:
Assign Tray <x> Assign Man Env
Assign MP Feeder Assign Man Paper
Then select a value:
Off* Printer uses factory default paper source assignments.
0...199 Select a numeric value to assign a custom value to a paper source.
None Paper source ignores the Select Paper Feed command.
Other Tray Renumber selections:
View Factory Def Press Menu to display the factory default value assigned to each paper source.
Restore Defaults Select Yes to return all tray assignments to factory default values.
numbers.
Font Name

Use the PostScript Menu to change printer settings that only affect jobs using the PostScript emulation printer language.
Select a menu item for more details:
To establish the font search order.
Resident* Printer searches printer memory for the requested font before searching flash memory or hard disk.
Flash/Disk Printer searches the hard disk and flash memory for the requested font before searching printer memory.
neither defective nor Read/Write or Write protected, and Job Buffer Size is not set to 100%.

To enhance the contrast and sharpness of low resolution bitmapped images (such as images downloaded from the World Wide Web) and smooth their color transitions.
Off* Uses default resolution when printing all images.
On Enhances low resolution images, such as graphics with a resolution of 72 dpi.
To print a page defining the PostScript emulation error when an error occurs.
Off* Discards the print job without printing an error message.
On Prints an error message before it discards the job.

Use the Serial Menu to change printer settings affecting jobs sent to the printer through a serial port (either Standard Serial or Serial Opt ).
Select a menu item for more details:

To specify the rate at which data can be received through the serial port.
See also:
Data Bits
Purpose:
To specify the number of data bits that are sent in each transmission frame.
See also:

To determine whether the printer uses the Data Set Ready (DSR) signal. DSR is one of the handshaking signals for most serial interface cables.
Off* All data received by the serial port is treated as valid data.
On Only data received while the DSR signal is high is treated as valid.
The serial interface uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. This electrical noise can cause stray characters to print. Select On to prevent stray characters from printing.
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.
To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.

To select the parity for serial input and output data frames.
See also:
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received through the serial port requires it, regardless of the default printer language.
On* Printer examines data on the serial interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language

To configure the printer so it automatically switches to PostScript emulation when a print job received through the serial port requires it, regardless of the default printer language.
On* Printer examines data on the serial interface and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language
To determine whether the printer communicates availability to the computer.
Off* Printer waits to receive data from the computer.
On Printer sends a continuous stream of XONs to the host computer to indicate that the serial port is ready to receive more data.
This menu item only applies to the serial port if Serial Protocol is set to XON/XOFF.
To specify the type of serial communication.
RS-232*
RS-422

To establish the behavior of the positive and negative signals when using RS-422 serial communication.
Normal* Uses default definition of one and zero.
Reverse Reverses the definition of one and zero, thereby allowing a positive connection to a host computer’s negative terminal without changing the physical cable.
To configure the size of the serial input buffer.
Disabled Disables job buffering. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates the Serial Buffer size (recommended setting).
3K to maximum size allowed
User specifies the Serial Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Serial Buffer size, disable or reduce the size of the parallel, infrared, LocalTalk, and USB buffers.
Resource Save

To select the hardware and software handshaking values for the serial interface.
DTR* Hardware handshaking.
DTR/DSR Hardware handshaking.
XON/XOFF Software handshaking.
XON/XOFF/DTR Combined hardware and software handshaking.
XONXOFF/DTRDSR Combined hardware and software handshaking.
Technical Reference

Use the Setup Menu to configure a variety of printer features.
Select a menu item for more details:
To establish whether the printer sounds an alarm when the printer requires operator intervention.
Off Printer does not sound an alarm.
Single* Printer sounds three quick beeps.
Continuous Printer repeats three beeps every 10 seconds.

To define the amount of time (in seconds) the printer waits after displaying an operator intervention error message before it resumes printing.
Disabled* Printer does not resume printing until someone clears the error message.
5...255 Printer waits the specified amount of time, and then automatically resumes printing. This timeout value also applies if the menus are displayed (and the printer is offline) for the specified period of time.
To determine the language of the text on the operator panel display.
To specify the storage location for downloaded resources.
RAM* All downloaded resources are automatically stored in printer memory (RAM).
Flash All downloaded resources are automatically stored in flash memory.
Disk All downloaded resources are automatically stored on the hard disk.
Storing downloaded resources in flash memory or on a hard disk is permanent storage rather than the temporary storage that RAM provides. The resources remain in the flash memory or on the hard disk even when the printer is turned off. Use MarkVision to download resources to the printer.

To establish whether the printer reprints jammed pages.
On Printer reprints jammed pages.
Off Printer does not reprint jammed pages.
Auto* Printer reprints a jammed page unless the memory required to hold the page is needed for other printer tasks.
To store statistical information about your most recent print jobs on the hard disk. The statistics include whether the job printed with or without errors, the print time, the job size (in bytes), the requested paper size and paper type, the total number of printed pages, and the number of copies requested.
Off* Printer does not store job statistics on disk.
On Printer stores job statistics for the most recent print jobs.
nor Read/Write or Write protected, and Job Buffer Size is not set to 100%.
Job Acct Limit; Job Acct Stat

To specify the number of print jobs for which statistics are maintained on your printer hard disk.
Disabled Stores statistics for each print job until the hard disk is full.
10...1000 (1000*) Stores statistics for the specified number of print jobs.
If you set Job Acct Limit to 10, the statistics from the 10 most recent print jobs are stored on the hard disk. When the limit is reached, statistics for the oldest print job are discarded and replaced with the statistics from the current print job. If you change the Job Accounting Limit, all job statistics currently stored on the hard disk are deleted.
nor Read/Write or Write protected, Job Buffer Size is not set to 100%, and Job Accounting is set to On.
Job Accounting, Job Acct Stat
To successfully print a page that may otherwise generate Complex Page errors.
Off* Prints a partial page of data if memory is insufficient to process the entire page.
On Ensures that an entire page is processed before it prints.
If, after selecting On, you still cannot print the page, you may also have to reduce the size and number of fonts on the page, or increase the installed printer memory.
For most print jobs, you do not need to select On. When On is selected, printing may be slower.

To specify the amount of time (in minutes) the printer waits after a job is printed before it goes into a reduced power state.
Disabled Disables Power Saver.
1...240 Specifies the amount of time after a print job before the printer goes into Power Saver mode. (Your printer may not support the entire range of values.)
The factory default Power Saver setting depends on your printer model. Print the menu settings page to determine the current Power Saver setting. When the printer is in Power Saver mode, it is still ready to receive print jobs.
Select 1 to put the printer in Power Saver mode one minute after it finishes a print job. This uses much less energy, but requires more warm-up time for the printer. Select 1 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time. Select a value between 1 and 240 minutes if you want a balance between energy consumption and a shorter warm-up period.
Print Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not start until Waiting is displayed.
Disabled The printer does not print the last page of a print job until one of the following occurs:
1...255 (90*) The printer prints the last page after the specified time. (Your printer may not support the entire range of values.)
Technical Reference

To establish the default printer language used to communicate data from the computer to the printer.
PCL Emulation PCL emulation, compatible with Hewlett-Packard printers.
PS Emulation* PostScript emulation, compatible with Adobe PostScript language.
from sending print jobs that use the other language.
To determine the behavior of the transfer belt during printing.
Max Speed* The transfer belt is engaged throughout the print job. This gives your printer greater printing speed.
Max Yield The transfer belt position is engaged based on page content. This may help you get more life out of your printer supplies.
To determine what the printer does with downloaded resources, such as fonts and macros stored in RAM, if the printer receives a job that requires more memory than is available.
Off* Printer retains downloaded resources only until memory is needed. It then deletes those resources associated with the inactive printer language.
On Printer retains all downloaded resources for all printer languages during language changes and printer resets. If the printer runs out of memory, 38 Memory Full is displayed.

To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled.
Disabled Disables Wait Timeout.
15...65535 (40*) Specifies the amount of time the printer waits for additional data before it cancels the job.
has no effect on PCL emulation print jobs.

The Supplies Menu provides information about printer supplies that require attention. It is only available when a supply is low or needs replacement.
Select a menu item for more details:
To view the status of the transfer belt.
80 Belt Life Warning It’s time to order a new transfer belt.
80 Belt Exhausted It’s time to replace the transfer belt.
80 Belt/Fuser Life Warning It’s time to order a new fuser and transfer belt.
80 Belt/Fuser Exhausted It’s time to replace the fuser and the transfer belt.
result in print quality problems and paper jams.
Replacing the transfer belt

To view the status of the black photodeveloper.
See also:
Coating Roll
Purpose:
To view the status of the oil coating roll.
85 Coating Roll Life Warning It’s time to order a new oil coating roll.
85 Coating Roll Exhausted It’s time to replace the oil coating roll.
result in poor toner adhesion to print media, other print quality problems, and paper jams.
Replacing the oil coating roll
To view the status of the color photodeveloper.
See also:

To view the status of the color toner cartridges.
See also:
Replacing a toner cartridge
To view the status of the fuser.
80 Fuser Life Warning It’s time to order a new fuser.
80 Fuser Exhausted It’s time to replace the fuser.
80 Belt/Fuser Life Warning It’s time to order a new fuser and transfer belt.
80 Belt/Fuser Exhausted It’s time to replace the fuser and the transfer belt.
Low · Empty · Replacing the fuser

To view the status of printer supplies.
Supplies Life
Purpose:
To view the status of printer supplies.
Coating Roll =Life Warning
Color Photo Dev =Life Warning
Black Photo Dev =Life Warning

Use the USB Menu to change printer settings affecting a Universal Serial Bus (USB) port (USB Option ).
Select a menu item for more details:
To temporarily store jobs on the printer hard disk before printing.
Off* Does not buffer print jobs to the hard disk.
On Buffers print jobs to the hard disk.
Auto Buffers print jobs only if the printer is busy processing data from another input port.

To configure the printer to process Macintosh binary PostScript print jobs.
On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems.
To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
To configure the printer so it automatically switches to PCL emulation when a print job received through the USB port requires it, regardless of the default printer language.
On* Printer examines the data on the USB interface and selects PCL emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off.
PS SmartSwitch; Printer Language

To configure the printer so it automatically switches to PostScript emulation when a print job received through the USB port requires it, regardless of the default printer language.
On* Printer examines data on the USB interface and selects PostScript emulation if the data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off.
PCL SmartSwitch; Printer Language
To configure the size of the USB input buffer.
Disabled Job buffering is disabled. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes.
Auto* Printer automatically calculates the USB Buffer size (recommended setting).
3K to maximum size allowed
User specifies the USB Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the USB Buffer size, disable or reduce the size of the parallel, serial, network, infrared, and LocalTalk buffers.
Resource Save

Use the Utilities Menu to print a variety of listings relating to available printer resources, printer settings, and print jobs. Other menu items let you set up printer hardware and troubleshoot printer problems.
Select a menu item for more details:
To assist in selecting colors used by certain applications.

To retrieve storage area lost when resources are deleted from flash memory.
Yes Printer transfers all resources stored in flash memory to printer memory and then reformats the flash memory option. When the format operation is complete, the resources are loaded back into flash memory.
No Printer cancels the request to defragment the flash memory.
WARNING: Do not turn off the printer while the flash is defragmenting.
To return your printer settings to the factory default values.
Restore • All menu items are returned to the factory default values except: – Display Language. – All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared
Menu, LocalTalk Menu, and USB Menu. • All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. (Resources residing in flash memory or on the hard disk are unaffected.)
Do Not Restore User-defined settings remain.
Restoring factory default settings
To format the printer hard disk.
Yes Deletes any data stored on the hard disk and prepares the device to receive new resources.
No Cancels the request to format the hard disk and leaves current resources stored on the disk.
WARNING: Do not turn off the printer while the hard disk is formatting.

To format the flash memory.
Yes Deletes any data stored in flash memory and prepares the flash memory to receive new resources.
No Cancels the request to format the flash memory and leaves current resources stored in flash memory.
WARNING: Do not turn off the printer while the flash is formatting.
To help isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed.
To exit Hex Trace, turn the printer off or reset the printer from the Job Menu.
To print a listing of all job statistics stored on the hard disk, or to clear all statistics on the disk.
Print Prints all statistics available for the most recent print jobs.
Clear Deletes all accumulated job statistics from the hard disk.
Job Accounting, Job Acct Limit

To perform a transfer belt alignment procedure by entering a series of alignment values.
A–L
See also:
Replacing the transfer belt; Printing Alignment Page
To print a list of all the resources stored in flash memory or on the hard disk.
and formatted, and Job Buffer Size is not set to 100%.
Print Fonts
Purpose:
To print a sample of all the fonts available for the selected printer language.
PCL Fonts Prints a sample of all printer fonts available for PCL emulation.
PS Fonts Prints a sample of all printer fonts available for PostScript emulation.
Technical Reference

To print a listing of the current user default values, the installed options, the amount of installed printer memory, and the status of printer supplies.
To print information relating to the internal print server and the network settings defined by the Network Setup menu item in the Network Menu.

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/ 032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.
October 2001

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
© Copyright 2001 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550.
Lexmark, Lexmark with diamond design, FontVision and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
ImageQuick and OptraImage are trademarks of Lexmark International, Inc.
Operation ReSource is a service mark of Lexmark International, Inc.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.
PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript 3 is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be compatible with the PostScript 3 language. This means the printer recognizes PostScript 3 commands used in various application programs, and that the printer emulates the functions corresponding to the commands.
Details relating to compatibility are included in the Technical Reference.
The following terms are trademarks or registered trademarks of these companies:
Albertus The Monotype Corporation plc
Antique Olive Monsieur Marcel OLIVE
Apple-Chancery Apple Computer, Inc.
Arial The Monotype Corporation plc
CG Omega Product of Agfa Corporation
CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation
Chicago Apple Computer, Inc.
Candid Agfa Corporation

Clarendon Linotype-Hell AG and/or its subsidiaries
Geneva Apple Computer, Inc.
GillSans The Monotype Corporation plc
Helvetica Linotype-Hell AG and/or its subsidiaries
Hoefler Jonathan Hoefler Type Foundry
ITC Avant Garde Gothic
ITC Bookman International Typeface Corporation
ITC Lubalin Graph International Typeface Corporation
ITC Mona Lisa International Typeface Corporation
ITC Zapf Chancery International Typeface Corporation
Joanna The Monotype Corporation plc
Monaco Apple Computer, Inc.
New York Apple Computer, Inc.
Palatino Linotype-Hell AG and/or its subsidiaries
Stempel Garamond Linotype-Hell AG and/or its subsidiaries
Times New Roman The Monotype Corporation plc
TrueType Apple Computer, Inc.
Univers Linotype-Hell AG and/or its subsidiaries
Other trademarks are the property of their respective owners.
The printer resident software contains:

Click the title of the document you want to review:
BSD License and Warranty statements
GNU General Public License
The Lexmark modified GNU licensed software is free software; you can redistribute it and/or modify it under the terms of the licenses referenced above. These licenses do not provide you any rights to the Lexmark copyrighted software in this printer.
Since the GNU licensed software that the Lexmark modifications are based upon is supplied explicitly without warranty, use of the Lexmark modified version is similarly provided without warranty. See the warranty disclaimers in the referenced licenses for additional details.
To obtain source code files for the Lexmark modified GNU licensed software, launch the drivers CD that shipped with your printer and click Contact Lexmark.
those specified herein may result in hazardous radiation exposure.
software.

The Lexmark C910 has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Class A computing device, use a properly shielded and grounded cable such as Lexmark part number 1329605 (parallel) or Lexmark part number 12A2405 (USB). Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France.
This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.
WARNING: This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case, the user may be required to take adequate measures.


This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom.
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1-meter average sound pressure, dBA
The EPA ENERGY STAR Office equipment program is a partnership effort with computer manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation.
Companies participating in this program introduce personal computers, printers, monitors, or fax machines that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program.
As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Printing 56 dBA · Idling 39 dBA








Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2000 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| Operator panel displays only diamonds or is blank. | • Turn the printer off, wait about 10 seconds, and turn the printer on. • Performing Self Test appears on the operator panel. When the test is completed, Ready is displayed. If these messages do not appear, turn the printer off and call the Lexmark Customer Support Center. | p.139 | |
| Menu settings changed from the operator panel have no effect. | Settings in the software application, the printer driver, or the printer utilities are overriding the settings made from the operator panel. • Change the menu settings from the printer driver, the printer utilities, or the software application instead of the operator panel. • Disable the settings in the printer driver, the printer utilities, or the software application so you can change settings from the operator panel. | p.139 | |
| Job did not print or incorrect characters printed. | Make sure Ready appears on the operator panel before you send a job to print. Press Go to return to Ready. | p.142 | |
| Job did not print or incorrect characters printed. | Make sure print media is loaded. Press Go to return to Ready. | p.142 | |
| Job did not print or incorrect characters printed. | Verify the printer is using the correct printer language. | p.142 | |
| Job did not print or incorrect characters printed. | Verify you are using the correct printer driver. | p.142 | |
| Job did not print or incorrect characters printed. | Make sure the parallel, serial, ethernet, or USB cable is firmly plugged in at the back of the printer. Make sure you are using the correct cable. Use IEEE 1284-compliant parallel cable. We recommend Lexmark part number 1329605 (10 ft) or 1427498 (20 ft). If you use RS-232 Serial, verify that a null modem cable is used. | p.142 | |
| Job did not print or incorrect characters printed. | If the printer is connected through a switch box, try a direct connection. | p.142 | |
| Job did not print or incorrect characters printed. | Verify the correct paper size is selected through the operator panel, in the printer driver, or in the software application. | p.142 | |
| Job did not print or incorrect characters printed. | Make sure PCL SmartSwitch and PS SmartSwitch are set to On. | p.142 | |
| Job did not print or incorrect characters printed (continued). | If you are using a print spooler, verify the spooler is not stalled. | p.142 | |
| Job did not print or incorrect characters printed (continued). | If you print across a network or on a Macintosh computer, see Solving network printing problems. | p.142 | |
| Job did not print or incorrect characters printed (continued). | Check the printer interface from the Setup Menu. Determine which host interface you are using. Print a menu settings page to verify the current interface settings are correct. See Printing the menu settings page. If you are using a serial interface: • Make sure Honor DSR is set to Off. • Check the protocol, baud, parity, and data bit settings. The settings on the printer and on the host computer should match. | p.142 | |
| Printer seems to print slowly. | Make sure you select the appropriate Paper Type setting before sending a job to print. | p.142 | |
| Printer seems to print slowly. | If the Paper Type is set to Transparency, the printer adjusts the fuser temperature and slows printing to improve the print quality. After printing on this media, the printer requires additional time to warm the fuser after you select another Paper Type setting (such as Plain Paper or Letterhead). | p.142 | |
| Printer seems to print slowly. | Reduce the complexity of your print job. Eliminating the number and size of fonts, the number and complexity of images, and the number of pages in a job may increase print speed. | p.142 | |
| Printer seems to print slowly. | Set Page Protect Off from the Setup Menu. See Page Protect for more information. | p.142 | |
| Unexpected page breaks appear. | Increase the Print Timeout value in the Setup Menu. | p.143 | |
| Transparencies jam. | If you just turned the printer on or the printer has been idle for a period of time, print on paper before trying to print on transparencies. Disabling Power Saver may also prevent transparencies from jamming after the printer has been idle. See Power Saver for more information. | p.143 | |
| Paper is jammed in the fuser. | Rotate the fuser pressure release lever down and remove the jammed paper. See Clearing paper jams for more information. | p.143 | |
| Part of the printed page was clipped or is cut off. | Make sure you have the correct size paper in the paper tray and the paper size is set correctly for the paper in the tray. | p.143 | |
| Printer is connected to the USB port, but will not print. | Make sure you are using Windows 98, Windows 2000, Windows Me, or another USB-capable operating system supported by Lexmark. | p.143 | |
| Paper does not feed properly. | Make sure you’re using recommended media. Do not use 16 lb paper or paper greater than 32 lb with the duplex unit. | p.143 | |
| Paper does not feed properly. | Make sure the adjustable guides in the paper tray are adjusted properly for the media you loaded. | p.143 | |
| Paper does not feed properly. | Make sure the stack of media does not exceed the maximum stack height indicated on the tray. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Make sure the print media you are using meets the specifications for your printer. Refer to the Card Stock & Label Guide for more information. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Flex print media before loading it in any of the paper sources. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Make sure the print media is loaded correctly. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Make sure the paper width and length guides on the paper sources are adjusted correctly. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Do not overfill the paper sources. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Do not force print media into the multipurpose feeder when you load it; otherwise, it may skew or buckle. | p.143 | |
| Print media misfeeds or multiple feeds occur. | Remove any curled print media from paper sources. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Load the recommended print side correctly for the type of print media you are using. See Loading media for more information. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Load less print media in the paper sources. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Turn the print media over or around and try printing again to see if feeding improves. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Do not mix print media types. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Do not mix reams of print media. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Remove the top and bottom sheets of a ream before loading the print media. | p.143 | |
| Print media misfeeds or multiple feeds occur (continued). | Load a paper source only when it is empty. | p.143 | |
| Envelope misfeeds or multiple feeds occur. | Remove the stack of envelopes from the multipurpose feeder. Load one envelope, feed it through the printer, and then reload the stack of envelopes in the multipurpose feeder. | p.143 | |
| Envelope misfeeds or multiple feeds occur. | Push down the bottom plate until it locks into place. See Loading the multipurpose feeder for an illustration. | p.143 | |
| Job prints from the wrong paper source or on the wrong print media. | Check the Paper Type setting in the Paper Menu from the printer operator panel and in the printer driver. | p.144 | |
| Printer does not duplex pages. | • Make sure Duplex is selected in either the Finishing Menu or the application you are printing from. • Make sure you have enough printer memory installed. | p.144 | |
| Print is too light, or printed images or characters have voids or dropouts. | Make sure you’re using recommended paper or other media. Use media from a new package. See Media guidelines. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | Make sure you have selected the correct Paper Type setting for the media you’re using. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | Set Toner Darkness to 4 in the Color Menu. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | Clean the LEDs. See Cleaning the LEDs. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | If you suspect a toner cartridge is low on toner, remove the appropriate cartridge and gently shake it back-and-forth to distribute the toner evenly. Reinsert the cartridge and try printing the job again. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | Replace the toner cartridge that matches the color on the page that is too light or not present in the void areas. See Replacing a toner cartridge. | p.145 | |
| Print is too light, or printed images or characters have voids or dropouts. | Replace the photodevelopers. If only black print appears light, you can replace just the black photodeveloper. If one of the colors prints too light, replace all three of the color photodevelopers. See Replacing a photodeveloper. | p.145 | |
| Colored lines, streaks, or smudges appear on the printed page, or print appears blurred or unclear. | Clean the LEDs. See Cleaning the LEDs. | p.145 | |
| Colored lines, streaks, or smudges appear on the printed page, or print appears blurred or unclear. | Remove the affected toner cartridge and gently shake it back-and-forth to distribute the toner evenly. Reinsert the cartridge and try printing the job again. See Replacing a toner cartridge. | p.145 | |
| Colored lines, streaks, or smudges appear on the printed page, or print appears blurred or unclear. | Replace the toner cartridge that matches the color of the lines, streaks, or smudges on the page. See Replacing a toner cartridge. | p.145 | |
| Colored lines, streaks, or smudges appear on the printed page, or print appears blurred or unclear. | Replace the photodevelopers. If only black print appears light, you can replace just the black photodeveloper. If one of the colors prints too light, replace all three of the color photodevelopers. See Replacing a photodeveloper. | p.145 | |
| Toner specks appear on the page. | Replace the oil coating roll. See Ordering supplies. | p.145 | |
| Toner covers the background of the page. | Make sure the affected toner cartridge is completely installed. | p.146 | |
| The page has 100% coverage of one color. | Replace the photodevelopers. If the page is black, you can replace just the black photodeveloper. If the page is another color, replace all three of the color photodevelopers. See Replacing a photodeveloper. | p.146 | |
| Light lines or streaks appear on the printed page. | Clean the LEDs. See Cleaning the LEDs. | p.146 | |
| Light lines or streaks appear on the printed page. | Remove the toner cartridge that matches the color of the lines or streaks and gently shake it back and forth to distribute the toner evenly. Reinsert the toner cartridge and try printing the job again. | p.146 | |
| Light lines or streaks appear on the printed page. | Replace the photodevelopers. If the problem only occurs when printing black, you can replace just the black photodeveloper. If the problem occurs when printing one of the colors, replace all three of the color photodevelopers. See Replacing a photodeveloper. | p.146 | |
| Light lines or streaks appear on the printed page. | Replace the toner cartridge that matches the color of the lines or streaks on the page. See Replacing a toner cartridge. | p.146 | |
| The page is blank or one of the colors is missing. | Replace the toner cartridge that matches the missing color on the page. See Replacing a toner cartridge. | p.146 | |
| Toner smears or rubs off the page. | Make sure you’re using recommended paper or other media. Refer to the Card Stock & Label Guide for more information. | p.146 | |
| Toner smears or rubs off the page. | Make sure you have selected the correct Paper Type setting for the media you’re using. | p.146 | |
| Toner smears or rubs off the page. | You may need to replace the fuser. See Replacing the fuser. | p.146 | |
| Printed materials delivered by the postal service arrive with ghosting or mirror images of the text visible on the page. | When preparing printed materials for mailing: • Use 24 lb (90 g/m2) paper. • Avoid rough paper; select paper with a smoothness from 100 to 150 Sheffield points. • Fold sheets with the text facing outward. • Meter envelopes or use precanceled stamps. • Place envelopes in trays and deliver to the post office; do not drop envelopes into mailboxes. | p.147 | |
| Quality of printed transparencies is inadequate. | Make sure you’re using recommended Lexmark transparencies. See Transparencies. | p.147 | |
| Quality of printed transparencies is inadequate. | Make sure you’re loading transparencies properly. See Loading transparencies | p.147 | |
| Quality of printed transparencies is inadequate. | When printing transparencies, always set the Paper Type to Transparency. See Paper Type. | p.147 | |
| Quality of printed transparencies is inadequate. | Set the Color Correction menu item to Vivid. See Color Correction. | p.147 | |
| Quality of printed transparencies is inadequate. | Avoid getting fingerprints on transparencies before printing. | p.147 | |
| Quality of printed images is inadequate. | Set Toner Darkness to 4 in the Color Menu. | p.147 | |
| A white gap is noticeable between color fills. | Turn the printer off and back on. The printer calibrates the photodevelopers and drive gears, which may improve registration. See Print Alignment for more information. | p.147 | |
| Colors do not print as you expect. | Make sure you have selected the appropriate Color Correction and Print Mode values for the job you’re printing. See Color Menu for more information. | p.147 | |
| Need updated printer drivers or utilities. | • Refer to the drivers CD that came with your printer. It contains printer drivers and utilities. • Visit the Lexmark Web site, www.lexmark.com, for the most current printer drivers or utilities. | p.170 | |
| Need to attach a serial cable to the printer. | If your printer is configured with a serial port, or you have installed an optional interface card, refer to the Setup Guide. | p.170 | |
| Cannot find the printer escape codes. | Refer to the Technical Reference available on the Lexmark Web site at www.lexmark.com. | p.170 | |
| Cannot print color. | Make sure the Print Mode menu item is not set to Black and White. | p.170 | |
| Cannot print color. | Make sure you’re using a color printer driver. | p.170 | |
| Cannot print color. | Make sure color printing is selected from the printer driver. | p.170 | |
| Cannot print color. | If you are printing on a network, make sure your network settings allow you to print in color. | p.170 | |
| Cannot print the menu settings page. | Make sure the selected paper source holds A4, letter, or legal size paper. Make sure the Paper Type setting for the selected source is Plain Paper. | p.170 | |
| Cannot print using the infrared port. | Make sure neither the Infrared Port nor Infrared Buffer is set to Disabled in the Infrared Menu. Also check the Window Size and Transmit Delay settings. See Infrared Menu. | p.170 | |
| Cannot print using the infrared port. | Make sure the distance between the two infrared ports is 3 m (10 ft) or less. If necessary, move the ports closer together. | p.170 | |
| Cannot print using the infrared port. | Make sure no objects are between the two ports. | p.170 | |
| Cannot print using the infrared port. | Make sure the computer is on a level surface. | p.170 | |
| Cannot print using the infrared port. | Bright light, such as direct sunshine or nearby artificial lights, may interfere with communication. If necessary, turn off lights or close window shades or blinds. | p.170 | |
| Cannot print using the LocalTalk port. | Make sure neither LocalTalk Port nor LocalTalk Buffer is set to Disabled in the LocalTalk Menu. | p.170 | |
| Cannot print using the LocalTalk port. | Verify the printer is set up correctly in the Macintosh Chooser. | p.170 | |
| Cannot receive faxes. | Make sure neither Fax Port nor Fax Buffer is set to Disabled in the Fax Menu. | p.171 | |
| Cannot receive faxes. | Make sure the fax machine you have connected is a class 1 fax modem. | p.171 | |
| Cannot receive faxes. | If power to the modem has been interrupted, complete the following steps in the order listed: 1 Turn the printer power off. 2 Turn the modem power on. 3 Turn the printer power on. | p.171 | |
| Large jobs will not collate. | Reduce the complexity of your print job. Eliminate the number and size of fonts, the number and complexity of images, and the number of pages. | p.171 | |
| Large jobs will not collate. | Add more printer memory. See Adding memory, or refer to the Setup Guide for more information. | p.171 | |
| Large jobs will not collate. | Install an optional hard disk. See Hard disk, or refer to the Setup Guide for more information. | p.171 | |
| Transparencies curl excessively. | Make sure you’re using recommended Lexmark transparencies. See Transparencies for more information. | p.171 | |
| Transparencies curl excessively. | Make sure exit tray is fully open. | p.171 | |
| Paper jam message does not clear. | To clear the paper jam messages, you must press Go. If the paper jam message continues, remove all paper from the paper path. Check both inside the printer as well as the paper source you were using. Close all doors and press Go. See Clearing paper jams for more information. | p.171 | |
| Page that jammed does not reprint after you clear the jam. | Set Jam Recovery to Auto or to On in the Setup Menu. See Auto Continue for more information. | p.171 | |
| Cannot insert a toner cartridge into the printer. | Make sure the cartridge is aligned properly and is being installed in the correct location. See Replacing a toner cartridge for more information. | p.171 | |
| Toner accumulates inside the printer. | Replace the toner cartridge that matches the color of the toner that has accumulated inside the printer. See Replacing a toner cartridge. | p.171 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.