EN
Lexmark logo
Official user manual

Lexmark 792e

12 pages·340 KB·Printer·PDF·ENDEFRITNLJA
Lexmark 792e
Table of Contents 21 sections Contents · Maintaining the printer · Cleaning the exterior of the printer · Cleaning the printhead lenses · … ShowHide
Page 1 of the Lexmark 792e user manual — April 2011 www.lexmark.com
Page 1 · click to enlarge
Page 1
Lexmark 792e diagram (page 1)
Fig. 1

C790 Series

Maintenance Guide

April 2011 www.lexmark.com

Page 3 of the Lexmark 792e user manual — Cleaning the printhead lenses
Page 3 · click to enlarge
Page 3
Lexmark 792e — Maintaining the printer diagram (page 3)
Fig. 2 · Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit bin.

3 Dampen a clean, lint-free cloth with water.

4 Wipe only the outside of the printer, making sure to include the standard exit bin.

5 Make sure the paper support and standard exit bin are dry before beginning a new print job.

Cleaning the printhead lenses

Clean the printhead lenses when you encounter print quality problems.

1 Open the front door.

Lexmark 792e — Cleaning the printhead lenses diagram (page 3)
Fig. 3 · Cleaning the printhead lenses

2 Remove all print cartridges.

Page 4 of the Lexmark 792e user manual — Storing supplies
Page 4 · click to enlarge
Page 4
Lexmark 792e — Storing supplies diagram (page 4)
Fig. 4 · Storing supplies

3 Locate the four printhead lenses.

Lexmark 792e — Storing supplies diagram (page 4)
Fig. 5 · Storing supplies

4 Clean the lenses using compressed air.

5 Reinstall the print cartridges.

6 Close the front door.

Lexmark 792e — Storing supplies diagram (page 4)
Fig. 6 · Storing supplies

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
Page 5 of the Lexmark 792e user manual — Ordering a print cartridge
Page 5 · click to enlarge
Page 5
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Device Status.

The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Ordering a print cartridge

When 88 [color] cartridge low or 88 [color] cartridge nearly low appears, order a new cartridge.

Estimated cartridge yield is based on the ISO/IEC 19798 standard. Extremely low print coverage (less than 1.25%) for extended periods of time may negatively affect actual yield and may cause cartridge parts to fail prior to exhaustion of toner.

Page 6 of the Lexmark 792e user manual — Ordering staple cartridges
Page 6 · click to enlarge
Page 6

Recommended print cartridge and part number

Part nameLexmark Return Program CartridgeRegular cartridge Cyan Print Cartridge Cyan Extra High Yield Print CartridgeC792A1CG C792X1CGC792A2CG C792X2CG Magenta Print Cartridge Magenta Extra High Yield Print CartridgeC792A1MG C792X1MGC792A2MG C792X2MG Yellow Print Cartridge Yellow Extra High Yield Print CartridgeC792A1YG C792X1YGC792A2YG C792X2YG Black Print Cartridge Black Extra High Yield Print CartridgeC792A1KG C792X1KGC792A2KG C792X2KG

Ordering a fuser or a transfer module

When 80 Fuser Life Warning or 83 Transfer Module Life Warning appears, order a replacement fuser or a transfer module.

When 80 Replace Fuser or 83 Replace Transfer Module appears, install the new fuser or the new transfer module. For installation information, see the documentation that came with the part.

Part namePart number Fuser40X7102 (100 volts) 40X7100 (115 volts) 40X7101 (230 volts) Transfer Module40X7103

Ordering a waste toner bottle

When 82 Waste toner bottle nearly full appears, order a replacement waste toner bottle.

When 82 Replace waste toner bottle appears, replace the waste toner bottle.

Part namePart number Waste toner bottleC792X77G

Ordering staple cartridges

When Staples Low or Staples Empty appears, order the specified staple cartridge.

For more information, see the illustrations inside the stapler door.

Part namePart number Staple Cartridges–3 pack (Since a pack contains 5,000 staples, a 3-pack contains 15,000 staples.)25A0013
Page 7 of the Lexmark 792e user manual — Replacing a print cartridge
Page 7 · click to enlarge
Page 7

Ordering a cleaning kit

Use the wet and dry wipes from the cleaning kit to clean the touch screen.

Part namePart number Cleaning kit (wet and dry wipes)40X0392

Replacing supplies

Replacing a print cartridge

1 Open the front door.

2 Lift the green handle and pull the print cartridge. Grasp the top handle and lift the cartridge out of the machine.

Page 8 of the Lexmark 792e user manual — Ordering a cleaning kit
Page 8 · click to enlarge
Page 8

3 Place the old cartridge in the replacement cartridge shipping box, and then attach the return label to the box for shipping.

Lexmark 792e — Ordering a cleaning kit diagram (page 8)
Fig. 7 · Ordering a cleaning kit

4 Unpack a new print cartridge.

Lexmark 792e — Ordering a cleaning kit diagram (page 8)
Fig. 8 · Ordering a cleaning kit
Page 9 of the Lexmark 792e user manual — Ordering a cleaning kit
Page 9 · click to enlarge
Page 9

5 Shake the new cartridge front-to-back and side-to-side to evenly distribute the toner.

Lexmark 792e — Ordering a cleaning kit diagram (page 9)
Fig. 9 · Ordering a cleaning kit

6 Remove the red packing strip from the new cartridge.

Lexmark 792e — Ordering a cleaning kit diagram (page 9)
Fig. 10 · Ordering a cleaning kit

7 Insert the new cartridge into the printer, and then push the green handle back in place.

Lexmark 792e — Ordering a cleaning kit diagram (page 9)
Fig. 11 · Ordering a cleaning kit
Page 10 of the Lexmark 792e user manual — Replacing the waste toner bottle
Page 10 · click to enlarge
Page 10

8 Close the front door.

Replacing the waste toner bottle

Replace the waste toner bottle when 82.xx Replace waste toner bottle appears. The printer will not continue printing until the waste toner bottle is replaced.

1 Remove the replacement waste toner bottle from its shipping box, and then unpack it.

Lexmark 792e — Replacing the waste toner bottle diagram (page 10)
Fig. 12 · Replacing the waste toner bottle

2 Open the printer front door, and then open tray 1.

3 Pull the green tabs sideways, and then grasp and pull the tabs with both hands to remove the waste toner bottle.

Lexmark 792e — Replacing the waste toner bottle diagram (page 10)
Fig. 13 · Replacing the waste toner bottle

4 Place the waste toner bottle in the recycling bag.

Page 11 of the Lexmark 792e user manual — Before moving the printer
Page 11 · click to enlarge
Page 11

5 Place the bag into the shipping box you removed the replacement part from.

Lexmark 792e — Moving the printer diagram (page 11)
Fig. 14 · Moving the printer

6 Peel the recycling label off, and place it on the shipping box.

Lexmark 792e — Moving the printer diagram (page 11)
Fig. 15 · Moving the printer

7 Insert the new waste toner bottle into the printer.

Lexmark 792e — Moving the printer diagram (page 11)
Fig. 16 · Moving the printer

8 Close tray 1, and then close the front door.

Moving the printer

Before moving the printer

Page 12 of the Lexmark 792e user manual — Shipping the printer
Page 12 · click to enlarge
Page 12
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 792e

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 792e

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 792e manual PDF

12 pages·340 KB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…