
Technical Reference

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA
© 2012 Lexmark International, Inc. All rights reserved.
Trademarks Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. All other trademarks are the property of their respective owners.
GOVERNMENT END USERS The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.
December 2012


This edition of the Technical Reference contains information about the following printers or multifunction printers (MFPs):
C746n C746dn C746dtn C748e C748de C748dte X746de X748de X748dte
Some LexmarkTM printers and MFP options may have one or more letters after the model number to indicate features.

Introduction 5

Introduction 6

Learning about the printer 7
Finding information about the printer

Learning about the printer 8

Printer Control Language (PCL) page formatting 9
For more information on PCL, see the Printer Languages and Interfaces Technical Reference. It contains a complete listing with descriptions of PCL commands.
To determine which PCL commands your printer supports, see “Appendix A: PCL support” on page 23.
The printable areas and logical pages for PCL emulation (both portrait and landscape orientation) are illustrated below. See the legend that follows for definitions of areas A through I.

Printer Control Language (PCL) page formatting 10
The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For more information about the printable areas and logical pages for PCL emulation, see “Printable areas” on page 9.

Printer Control Language (PCL) page formatting 11

Printer Job Language (PJL) 12
PJL commands information
Your printer supports complete PJL commands, including certain commands that cause the printer to enter PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS).
For a complete listing with descriptions of PJL commands, see the Printer Languages and Interfaces Technical Reference.
To determine which commands your printer supports, see “Appendix B: PJL support” on page 32.

PostScript (PS) emulation 13
Your printer supports complete PostScript emulation supplemental operators. For full, detailed descriptions of these operators, see the PostScript emulation chapter of the Printer Languages and Interfaces Technical Reference.
To determine which commands your printer supports, see “Appendix C: PostScript support” on page 83.
X = Not supported
Paper sizes Printer model
Size Literal name Size (mm) Size (inches) Size (points) C746, C748 X746, X748
11 x 17 11x17 279.4 x 431.8 11 x 17 792 x 1224 X X
17 x 11 ledger 431.8 x 279.4 17 x 11 1224 x 792 X X
A3 a3 297 x 420 11.7 x 16.54 842 x 1191 X X
A4 a4 210.0 x 297.0 8.3 x 11.7 595 x 842
A5 a5 148.0 x 210.0 5.83 x 8.27 419 x 595
A6 a6 105.0 x 148.0 4.13 x 5.83 297 x 419
Executive executivepage 184.2 x 266.7 7.25 x 10.5 522 x 756
Folio folio 215.9 x 330.2 8.5 x 13.0 612 x 936
JIS B4 b4* 257 x 364 10.12 x 14.33 729 x 1032 X X
JIS B5 b5* 182.0 x 257.0 7.2 x 10.1 516 x 729
Legal legal 215.9 x 355.6 8.5 x 14.0 612 x 1008
Letter letter 215.9 x 279.4 8.5 x 11.0 612 x 792
Oficio oficio 215.9 x 340.4 8.5 x 13.4 612 x 965 (Lexmark‑unique size)
612 x 972 (official PostScript size)
Statement statement 139.7 x 215.9 5.5 x 8.5 396 x 612
Universal 216 x 1219 8.5 x 48 841.68 x 3456
* This is a Japanese Industry Standard (JIS) paper size. The same named designation is used by the JIS and International Organization for Standardization (ISO) for different paper sizes.

PostScript (PS) emulation 14
When the printer receives one of the operators listed in “Tray selected with tray operators” on page 14, it performs the actions listed in this section. This paper tray selection process ends when a suitable paper source is chosen and paper is fed from this tray.
For printers that support automatic two‑sided printing (duplexing):
When these operators are used, it is equivalent to executing the following PostScript emulation sequence:
>>
where x y are the PageSize in points.
Operator Tray selected (corresponding image size is set)
11x17tray Tray with 11 x 17‑size paper X X
a3tray Tray with A3‑size paper X X
setpagedevice

PostScript (PS) emulation 15

The literal names in “Envelope sizes supported” on page 15 are also supported as operators in userdict. These operators change the image size, but do not change the active paper source. Therefore, when these operators are used, part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation sequence. The following example uses a 3.875 x 7.5 envelope.
>>setpagedevice

Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,
7 3/4 3.875x7.5envelope 98.4 x 190.5 3.875 x 7.5 279 x 540
Commercial 9 3.875x8.875envelope 98.4 x 225.4 3.875 x 8.875 279 x 639

PostScript (PS) emulation 16

Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,
Commercial 10 4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 297 x 684
International B5 176x250envelope 176 x 250 6.93 x 9.84 499 x 708
International C5 162x229envelope 162 x 229 6.38 x 9.01 459 x 649
International DL 110x220envelope 110 x 220 4.33 x 8.66 312 x 624
Other envelope otherenvelope 296.93 x 427.48 11.69 x 16.83 842 x 1212

Literal name Compatible literal name C746, C748 X746, X748
If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:

PostScript (PS) emulation 17
If manualfeed or ManualFeed is true, then the printer prompts you to load the requested size manually. If no manual feed exists on the printer, then a rangecheck error message is issued.
The envelope tray the printer selects when it receives an envelopetray operator is listed in “Envelopetray operator selections” on page 17. These operators are equivalent to executing the following PostScript emulation sequence:
setpagedevice
where x y are the PageSize in points.

Operator Tray selected (corresponding image size is set) C746, C748 X746, X748
110x220envelopetray Tray with 110 x 220‑size envelopes
dlenvelopetray Tray with 110 x 220‑size envelopes
162x229envelopetray Tray with 162 x 229‑size envelopes
c5envelopetray Tray with 162 x 229‑size envelopes
176x250envelopetray Tray with 176 x 250‑size envelopes
b5envelopetray Tray with 176 x 250‑size envelopes
3.875x7.5envelopetray Tray with 3.875 x 7.5‑size envelopes
monarcenvelopetray Tray with 3.875 x 7.5‑size envelopes
3.875x8.875envelopetray Tray with 3.875 x 8.875‑size envelopes
4.125x9.5envelopetray Tray with 4.125 x 9.5‑size envelopes
com10envelopetray Tray with 4.125 x 9.5‑size envelopes

Airflow requirement
The room should meet ASHRAE 62—1989 standards.
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

ADF color copy Not applicable Not applicable 58 58
ADF color scan Not applicable Not applicable 54 54
ADF mono copy Not applicable Not applicable 59 57
ADF mono scan Not applicable Not applicable 54 54
ADF color copy Not applicable Not applicable 7.2 7.2
ADF color scan Not applicable Not applicable 7.2 7.4
Printer specifications 18


ADF mono copy Not applicable Not applicable 7.4 7.5
ADF mono scan Not applicable Not applicable 7.2 7.4

C746 SFP low‑voltage models 100–110 V at 50–60Hz, nominal
C748 SFP low‑voltage models 110–127 V at 50–60Hz, nominal
C746, C748 SFP high‑voltage models 220–240 V at 50–60Hz, nominal
X746, X748 MFP low‑voltage models 100–127 V at 50–60Hz, nominal
X746, X748 MFP high‑voltage models 220–240 V at 50–60Hz, nominal
Printer specifications 19

The following table specifies the nominal average power requirements for the base configuration, including fuser power.

Print (simplex) 535 W 535 W 560 W 560 W
Print (duplex) 420 W 420 W 435 W 435 W
Off 0 W 0 W 0 W 0 W
Copy Not applicable Not applicable 600 W 600 W
ADF scan Not applicable Not applicable 85 W 85 W
Single‑function printer dimensions (unpackaged)

Printer model Height Width Depth Weight with cartridge (unpackaged)
C746 455 mm (17.9 in.) 435 mm (17.1 in.) 400 mm (15.7 in.) 25.2 kg (55.6 lb)
C748 455 mm (17.9 in.) 435 mm (17.1 in.) 400 mm (15.7 in.) 25.6 kg (56.4 lb)
Multiple‑function printer dimensions (unpackaged)

Printer model Height Width Depth Weight with cartridge (unpackaged)
X746de 787 mm (31.0 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 44.0 kg (97.0 lb)
X748de 787 mm (31.0 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 44.2 kg (97.5 lb)
X748dte 909 mm (35.8 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 48.3 kg (106.5 lb)
Printer specifications 20

Option Height Width Depth Weight with cartridge (unpackaged)
Optional 550‑sheet tray1
122 mm (4.8 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 4.5 kg (10.0 lb)
Optional 2000‑sheet tray2
345 mm (13.6 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 26.1 kg (57.5 lb)
Spacer1 122 mm (4.8 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 3.2 kg (7.0 lb)
Swivel cabinet 264 mm (10.38 in.) 476 mm (18.75 in.) 600 mm (23.63 in.) 21.82 kg (48.1 lb)
Caster base3 110 mm (4.3 in.) 654 mm (25.7 in.) 752 mm (29.6 in.) 31.8 kg (70 lb)
1 The 550‑sheet tray or spacer is approximately 169 mm (6.6 in,) high if the anti‑tip posts are included.
2 The 2000‑sheet tray is approximately 387 mm (15.2 in.) high if the anti‑tip posts are included.
3 The caster base is approximately 130 mm (5.1 in.) high if the anti‑tip posts are included.

Printer model Left side Right side Front Rear Top
C746, C748 150 mm (5.9 in.) 100 mm (3.9 in.) 400 mm (15.7 in.) 100 mm (3.9 in.) 150 mm (5.9 in.)
Printer model Left side Right side Front Rear Top
X746, X748 100 mm (3.9 in.) 100 mm (3.9 in.) 483 mm (19 in.) 100 mm (3.9 in.) 394 mm (15.5 in.)

C746, C748 15.6 to 32.20°C (60 to 90°F) 10.0 to 40°C (50 to 104°F) ‑40 to 40°C (‑40 to 104°F)
X746, X748 15.6 to 32.0°C (60 to 90°F) 10.0 to 40°C (50 to 104°F) ‑40 to 40°C (‑40 to 104°F)
Printer specifications 21

C746, C748
15.6 to 32.2°C (60 to 90°F)
15.6 to 32.2°C (60 to 90°F)
Printer humidity ranges
Air relative humidity (RH)
Operating value Shipping and storage value
Cartridge air temperature ranges
Shipping and storage value
‑40 to 40°C (40 to 104°F)
‑40 to 40°C (40 to 104°F)
Printer model Altitude (above sea level)
Operating value Shipping and storage value
C746, C748 0–3048 m (10000 ft) 0–10300 m (34000 ft)
X746, X748 0–3048 m (10000 ft) 0–10300 m (34000 ft)

PCL emulation commands



ESC&l#A [optional data] Set Page Size with Custom Load Messaging
ESC&l#C Set Vertical Motion Index (VMI)




ESC)#X Select Secondary Download Font (by Font ID)
ESC)s#V Secondary Font Height (Point Size) X X


ESC*l#W[data] Color Lookup Tables X X
ESC*p#X Set Horizontal Cursor Position (in PCL Units)
ESC*p#Y Set Vertical Cursor Position (in PCL Units)




ESC%‑12345X Universal Exit Language (UEL) / Start of PJL























Message Status code Return string C746, C748 X746, X748
30016 37 Insufficient memory, some Held Jobs were deleted
30016 37 Insufficient memory, some Held Jobs were deleted


Message Status code Return string C746, C748 X746, X748
30016 37 Insufficient memory, some Held Jobs will not be restored
30016 37 Insufficient memory for Flash Memory Defragment operation
Intervention Required - Held Jobs May Not Be Restored (57 Configuration Change)
30016 57 Configuration change, some held jobs were not restored
30016 37 Insufficient memory, some held jobs will not be restored
30017 39 Complex page, some data may not have printed


Message Status code Return string C746, C748 X746, X748


Message Status code Return string C746, C748 X746, X748
30076 35 Insufficient memory to support Resource Save feature
30076 35 Insufficient memory to support Resource Save feature


Message Status code Return string C746, C748 X746, X748


Message Status code Return string C746, C748 X746, X748
32002 52 Not enough free space in flash memory for resources


Message Status code Return string C746, C748 X746, X748
40048 [Pick up text from 'data1' and 'data2 but not 'userMessage1' and 'userMessage2']
40049 [Pick up text from 'data1' and 'data2' but not 'userMessage1' and 'userMessage2']


Message Status code Return string C746, C748 X746, X748

Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40019 Remove originals from the scanner automatic document feeder
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40021 Cover Open, Close Top Covers, Close Door, or Insert Cartridge
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
Intervention Required - Install Env Feeder or Cancel Job
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40129 84.xx Replace [color] imaging unit and [color] cartridge
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40309 32.xx Black cartridge part number unsupported by device
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40310 32.xx Cyan cartridge part number unsupported by device
40311 32.xx Magenta cartridge part number unsupported by device
40312 32.xx Yellow cartridge part number unsupported by device
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40409 30.xx Missing black cartridge and/or black imaging unit
40410 30.xx Missing cyan cartridge and/or cyan imaging unit
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
40411 30.xx Missing magenta cartridge and/or magenta imaging unit
40412 30.xx Missing yellow cartridge and/or yellow imaging unit
* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.


Message Status code Return string C746, C748 X746, X748
Intervention Required - Remove Paper From Standard Output Bin


Message Status code Return string C746, C748 X746, X748
41xyy Load [paper source] with [paper type] [paper size]


Message Status code Return string C746, C748 X746, X748
41xyy Load Manual Feeder with [paper type] [paper size]
41xyy Load single sheet feeder with [Custom Type Name]
41xyy Load single sheet feeder with [paper type] [paper size]
41xyy Change [paper source] to [Custom Type Name], load [orientation]
41xyy Change [paper source] to [Custom String] load [orientation]
41xyy Change [paper source] to [paper type] [paper size]


Message Status code Return string C746, C748 X746, X748
41xyy Change [paper source] to [paper type] [paper size] load [orientation]
41xxy Load Manual Feeder with [paper type] [paper size]


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number. z represents the bin number.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number. z represents the bin number.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number. z represents the bin number.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number. z represents the bin number.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number. z represents the bin number.


w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.


These commands are Lexmark extensions which have been added to the PJL command set to provide the user with remote control of many printer functions.




Command C746, C748 X746, X748
LPROGRAMADAPTOR
LPROGRAMCOFF
LPROGRAMENG
LPROGRAMRIP
LWRITEOM

Supplemental operators































Device Parameters for the Communication Device %Parallel%, %ParallelA%, %ParallelB%, %ParallelC%, %ParallelD%


Device Parameters for the Communication Device %Serial%, %SerialA%, %SerialB%, %SerialC%, %SerialD%


Device Parameters for the Communication Device %LocalTalk%, %LocalTalkA%, %LocalTalkB%, %LocalTalkC%, %LocalTalkD%
Device Parameters for the Communication Device %EtherTalk%, %EtherTalkA%, %EtherTalkB%, %EtherTalkC%, %EtherTalkD%


Device Parameters for the Communication Device %IR%, %IR_A%, %IR_B%, %IR_C%, %IR_D%
Device Parameters for the Communication Device %USB%, %USB_A%, %USB_B%, %USB_C%, %USB_D%


Device Parameters for the Communication Device %TokenTalk%, %TokenTalkA%, %TokenTalkB%, %TokenTalkC%, %TokenTalkD%
Device Parameters for the Communication Device %AppSocket%, %AppSocketA%, %AppSocketB%, %AppSocketC%, %AppSocketD%


Device Parameters for the Communication Device %RemotePrinter%, %RemotePrinterA%, %RemotePrinterB%, %RemotePrinterC%, %RemotePrinterD%
Device Parameters for the Communication Device %PrintServer%, PrintServerA%, PrintServerB%, %PrintServerC%, %PrintServerD%
Device Parameters for the Communication Device %LPR%, %LPR_A%, %LPR_B%, %LPR_C%, %LPR_D%


Device Parameters for the Communication Device %LexLink%, %LexLinkA%, %LexLinkB%, %LexLinkC%, %LexLinkD%
Device Parameters for the Communication Device %IP%, %IP_A%, %IP_B%, %IP_C%, %IP_D%
Device Parameters for the Communication Device %EthernetPhysical%, %EthernetPhysicalA%, %EthernetPhysicalB%, %EthernetPhysicalC%, %EthernetPhysicalD%
Device Parameters for the Communication Device %TokenRingPhysical%, %TokenRingPhysicalA%, %TokenRingPhysicalB%, %TokenRingPhysicalC%, %TokenRingPhysicalD%


Device Parameters for the Parameters Device %Calendar%, %CalendarA%, %CalendarB%, %CalendarC%, %CalendarD%






Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.