

Machine type(s):
Model(s):



Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.
Refer service or repairs, other than those described in the user documentation, to a professional service person.
SAVE THESE INSTRUCTIONS.
Safety information 6

About your printer 7
Thank you for choosing this printer!
We've worked hard to make sure it will meet your needs.
To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.
We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.
We are committed to protecting the environment and are continually improving our printers to reduce their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's environmental impact even further.

About your printer 8
To read the Lexmark Environmental Sustainability Report, visit www.lexmark.com/en environment.

About your printer 9


About your printer 10


About your printer 11



About your printer 12

Ordering and replacing supplies 13
Ordering ink cartridges
Lexmark Pro710 Series models

1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.
2 Available only on the Lexmark Web site at www.lexmark.com.

High‑yield black cartridge 160 XL 160 XLA
High‑yield yellow color cartridge 160 XL 160 XLA
High‑yield cyan color cartridge 160 XL 160 XLA
High‑yield magenta color cartridge 160 XL 160 XLA
1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.
2 Available only on the Lexmark Web site at www.lexmark.com.
Lexmark Pro719 models

Ordering and replacing supplies 14
Lexmark printers, ink cartridges, and photo paper are designed to perform together for superior print quality, and our inks are formulated to work with your printer and help extend the life of your product. We recommend that you use only genuine Lexmark ink cartridges.
Lexmark's warranty does not cover damage caused by non-Lexmark ink or ink cartridges.
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
1 Turn on your printer.
2 Open the printer.

3 Press the release tab, and then remove the used ink cartridge or cartridges.


Ordering and replacing supplies 15
1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge.
If your ink cartridge comes with a twist cap, then remove the cap.

2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

3 Close the printer.
To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
For more information, go to www.lexmark.com.
Item Part Number · USB cable 1021294

Ordering and replacing supplies 16
To return Lexmark products for recycling:
1 Visit our Web site at www.lexmark.com/re recycle.
2 Find the product type you want to recycle, and then select your country or region from the list.
3 Follow the instructions on the computer screen.
Paper Paper size

Using the printer control panel buttons and menus 17
Replacing the language sheet
A language sheet is used to label buttons on the printer control panel. Language sheets can be replaced anytime depending on which language you want to use. Some languages may not be available depending on your printer model.
1 Open the printer.
2 Remove the language sheet from the documentation folder that came with the printer.
3 Remove the language sheet holder from the printer control panel.

4 Insert the preferred language sheet into the language sheet holder, and then attach the language sheet holder to the printer control panel.

5 Close the printer.

Using the printer control panel buttons and menus 18

for three seconds to turn off the printer.
to switch to Sleep mode. Press and hold
View:
3 Arrow buttons Navigate to menu or submenu items that appear on the display.
Navigate from any level in the menu back to the home screen.
5 Keypad In Copy mode or Photo mode: Enter the number of copies or prints you want to make.
In Fax mode:

Using the printer control panel buttons and menus 19

Display the last number dialed. Press the left or right arrow button to view the last five numbers dialed.
Insert a three-second pause in a fax number to wait for an outside line or get through an automated answering system. Enter a pause only when you have already begun entering the number.
Dial the telephone number manually using the keypad before sending the fax.
Access fax numbers from a saved list of numbers.
Switch to color mode.
Switch to black‑and‑white mode.
Start a job, depending on which mode is selected.
Check the network connection status of your printer and access the network settings.
17 Wi‑Fi indicator
Check the wireless connection of your printer.

Using the printer control panel buttons and menus 20
18 Eco‑Mode
The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle. The Sleep feature optimizes energy efficiency by reducing the printer power consumption. To save the most energy, select the lowest Sleep timeout.
1 From the printer control panel, navigate to:
> Device Setup >
2 Press the up or down arrow button to select or use the keypad to enter the value of the Sleep timeout, and then press
To significantly cut paper usage and reduce paper waste, activate duplex printing:
1 From the printer control panel, navigate to:
> 2‑Sided Copy, Standalone >
> Print Mode Setup >
2 Press the up or down arrow button to scroll to On, and then press
To optimize energy efficiency, reduce the Sleep timeout and Screen Brightness:
1 From the printer control panel, navigate to:
> Device Setup >
2 Press the up or down arrow button to select or use the keypad to enter the Sleep timeout value, and then press
3 From the printer control panel, navigate to:
> Device Setup >
> Screen Brightness >
4 Press the up or down arrow button to scroll to Dim, and then press
Resetting to factory default settings will delete all the printer settings you have previously selected.
1 From the printer control panel, navigate to:
> Restore Factory Defaults >
2 Press the up or down arrow button to scroll to Restore All Printer Settings, and then press

Using the printer control panel buttons and menus 21
3 Press the left or right arrow button to scroll to Yes, and then press
The printer restarts automatically after resetting to factory default settings.
4 When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.
Initial Setup Complete appears on the display.

What are shortcuts?
A shortcut is a way to quickly accomplish printing, copying, scanning, e‑mailing, or faxing tasks with the printer. You can configure and save a set of frequently used printer settings available for a given task and then assign a shortcut number and shortcut name to it.
The shortcut number and shortcut name serve as the identification for a particular task and its printer settings. When you want to perform a task with those settings, you do not need to go through the usual process of adjusting the settings and options. Simply enter the shortcut number or select the shortcut name and number on the printer control panel, and the task will launch automatically.
Configure the shortcut settings for a task in the printer Web page:
Copy Copy a document or photo.
Eco‑Copy Copy a document or photo using two‑sided or draft setting.
ID Card Copy Copy both sides of an ID card onto a single page.
Scan to Fax Scan a document or photo and send it through fax.
Scan to E‑mail Scan a document or photo and send it through e‑mail.
Scan to Computer Scan a document or photo and send it to your computer.
Scan to Network Scan a document or photo and save it to a network folder.
Scan to Memory Device Scan a document or photo and save it to a memory card or flash drive (depending on your printer model).
Print a File Print a document from your computer.
Example:
A lawyer who uses his printer to send e-mails to clients normally navigates through the printer control panel to select the feature and its available options. Instead of doing that, he can configure the printer settings (such as the message title and recipient) from the printer Web page, and then assign a shortcut number and shortcut name to the task. Every time he enters the shortcut number or selects the shortcut name on the printer control panel, the printer automatically sends the documents according to the selected settings.
Using shortcuts 22 · Choose To

During installation, a link will be provided for you to create shortcuts. If you were not able to create your shortcuts during installation, then you may create the shortcuts through your printer software.
Before you begin, make sure:
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Navigate to:
Printer Home > select your printer > Settings > Configure Shortcuts
1 From the Finder, navigate to:
Applications > select your printer folder > Shortcuts
2 Select your printer from the list, and then click Launch.
1 Launch the shortcuts page, and then navigate to:
Add New Shortcut > select a task
2 Assign a shortcut number and shortcut name, and then specify the settings.
3 Click Add.
Using shortcuts 23 · 1 Click

Make sure you have created a shortcut.
From the printer control panel, navigate to:
> select a shortcut >
> enter the shortcut number >
1 Launch the shortcuts page, and then select a shortcut.

Using the printer software 25
Minimum system requirements
The printer software requires up to 500MB of free disk space.
* The printer driver for this operating system is available only at http://supp support.lexmark.com.
When you set up the printer using the installation software CD, all the necessary software was installed. You may have chosen to install some additional programs. The following table provides an overview of various software programs and what they can help you do.

Using the printer software 26
If you did not install these additional programs during initial installation, then reinsert the installation software CD, run the installation software, and then click Advanced Options > Install Additional Software.
LexmarkTM Printer Home (referred to as Printer Home)
Lexmark Phone Book (referred to as Phone Book)
Manage your fax contacts.
Abbyy Sprint OCR Scan a document and produce text that you can edit with a word‑processing program.
Lexmark Wireless Setup Utility (referred to as Wireless Setup Utility)
Lexmark Tools for Office (referred to as Tools for Office)
Access your favorite settings in Microsoft Office 2007.
Printer Setup Utility Configure the fax and e‑mail settings of your printer.
Status Messenger Learn more about the printing problems encountered.
Product Update Receive automatic notifications of updates to your printer software when new updates are available.
Use the To

Using the printer software 27
Printing Preferences When you click File > Print > Properties with a document open, a Printing Preferences dialog appears. The dialog lets you select options for the print job, such as the following:
Use the Print dialog to adjust the print settings and schedule print jobs.
With a document or photo open, choose File > Print.
1 From the Finder, navigate to:
Applications > select your printer folder
2 Double‑click the application that you want to use.
Shortcuts Speed up usual tasks with your printer.
Set up the printer on a wireless network.
Uninstaller Remove the printer software from your computer.
Use the To · Use the To · Wireless Setup Assistant

Using the printer software 28
Web links are links to predefined Web pages that are saved in the printer folder.
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links
2 Double‑click the Web link that you want to visit.
Customer Support Contact customer support.
Lexmark Software Updates Download and install the latest printer software.
Lexmark Online Visit the Lexmark Web site.
Order Supplies Online Order ink or supplies.
Printer Registration Register your printer.
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Navigate to:
Printer Home > select your printer > Support > Online support
4 From the Web site, select your printer and then download the driver.
5 Install additional or optional software.
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links > Lexmark Software Updates
2 From the Web site, select your printer and then download the driver.
3 Install additional or optional software.
Use To · 1 Click

Using the printer software 29
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Select your printer, and then click Product Update.
4 Follow the instructions on the computer screen.
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links > Lexmark Software Updates
2 From the Web site, select your printer and then download the driver.
Universal Print Drivers (PCL 5 emulation, PCL XL emulation, and PS emulation) can be downloaded from our Web site. You need to search for your printer model to view compatible drivers.
When you set up the printer using the installation software CD, all the necessary software was installed. If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when you send a print job, then try removing and reinstalling the printer.
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Click the uninstaller.
4 Follow the instructions on the computer screen.
5 Once the uninstall process is complete, restart your computer.
1 Close all open applications.
2 From the Finder, navigate to:
Applications > select your printer folder
1 Click · 1 Click

Using the printer software 30
3 Double‑click Uninstaller.
4 Follow the instructions on the computer screen.
1 Close all open software programs.
2 Insert the installation software CD.
If the installation dialog screen does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Click Install, and then follow the instructions on the computer screen.
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3 Double-click the software installer package, and then follow the instructions on the computer screen.
1 Go to the Lexmark Web site at http://supp support.lexmark.com.
2 Navigate to:
SUPPORT & DOWNLOADS > select your printer > select your operating system
3 Download the driver, and then install the printer software.
a Click

Loading paper and original documents 31
Loading the paper tray
Make sure:
1 Pull the tray completely out of the printer.

2 Move the paper guides to the sides of the tray.


Loading paper and original documents 32
3 If you are loading A4‑ or legal‑size paper, then squeeze the tab and pull to extend the tray.

4 Load the paper facedown.

5 Adjust the paper guides to rest gently against the left, right, and bottom edges of the paper.


Loading paper and original documents 33
6 Insert the tray.

7 Flip up the paper stop to catch the paper as it exits.



Loading paper and original documents 34
1 Pull tray completely out of the printer.
2 Move the paper guides to the sides of tray.

Loading paper and original documents 35
3 Use the envelope icon and the photo paper outline on the bottom of the tray to help you position envelopes or photo paper.

4 Load envelopes or photo paper.



Loading paper and original documents 36
5 Adjust the paper guides to rest gently against the left, right, and bottom edges of the envelopes or photo paper.

6 Insert the tray.

7 Flip up the paper stop to catch the envelopes or photos as they exit.
Load up to Make sure

Loading paper and original documents 37
Load up to Make sure
100 sheets of coated paper 25 sheets of photo paper
25 sheets of glossy paper

10 envelopes

Loading paper and original documents 38
Load up to Make sure


Loading paper and original documents 39
You can adjust the settings for your print and copy jobs to match the paper size and type you have loaded in the printer.
1 From the printer control panel, press
2 Adjust the settings as needed: • If you want to set the paper size, then navigate to: Setup >
> Paper Setup >
> Paper Size >
> select the default paper size >
> Paper Setup >
> Paper Type >
> select the default paper type >
1 Open the scanner lid and place the document facedown on the scanner glass.
2 Close the scanner lid.



Loading paper and original documents 40
You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4‑, letter‑, or legal‑size paper into the ADF.
1 Adjust the paper guide on the ADF tray to the width of the original document.
2 Load the original document faceup and top edge first into the ADF until you hear a sound from the ADF.

Tray linking is useful for large print jobs or multiple copies. When Paper Tray Linking is enabled, the printer automatically picks up paper from the optional tray.
From the printer control panel, navigate to:
> Paper Setup >
> Paper Tray Linking >
> Setup > · > Automatic

Tips for printing
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Select the print quality, the number of copies to print, the type of paper to use, and how the pages should print.
4 Click OK to close any printer software dialogs.
5 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
6 From the print options menu, choose the print quality, the number of copies to print, the type of paper to use, and how the pages should print.
7 Click Print.
Printing 41

When printing multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Layout tab > > Copies area
4 Enter the number of copies that you want to print, and then select Collate.
5 Click OK to close any printer software dialogs.
6 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
6 From the Copies area, enter the number of copies that you want to print, and then select Collated.
7 Click Print.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Layout tab > > Copies area
Printing 42 · Collated Not collated

4 To change the current page order, select the Reverse page order check box.
5 Click OK to close any printer software dialogs.
6 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
6 From the print options pop-up menu, choose Paper Handling.
8 Click Print.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Layout tab > Page Layouts ar ea > > select Multiple pages per side (N‑Up)
4 Select the number of page images to print on each side.
5 Adjust other settings as needed.
6 Click OK to close any printer software dialogs.
7 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
6 From the print options pop‑up menu, choose Layout.
7 From the Pages per Sheet pop‑up menu, choose the number of page images to print on each page.
Printing 43

8 Adjust other settings as needed.
9 Click Print.
Make sure the flash drive contains document files that are supported by the printer. For more information, see “Supported file types” on page 47.
1 Insert a flash drive.
When the printer detects the memory device, Storage Device Detected appears on the display.
2 If document files are stored on the memory device, then the printer automatically switches to File Print mode.
If document files and image files are stored on the memory device, then press the left or right arrow button to scroll to Documents, and then press
3 Press the up or down arrow button to scroll to the document, and then press
to select the document for printing.
4 From the Print Options menu screen, use the arrow buttons to select your printing options, and then press
, if necessary.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Paper/Fi Finishing tab > > Manage Custom Sizes > New
4 Type a name and adjust the settings as needed to create a custom size, and then click OK.
5 Navigate to:
Paper type list > > select the created custom type
6 Navigate to:
Layout tab > Page Orientation ar ea > > select an orientation
7 Click OK to close any printer software dialogs.
8 Click OK or Print.
Printing 44 · 5 Press

1 With a document open, choose File > Page Setup.
2 From the “Format for” pop‑up menu, choose your printer.
3 From the Paper Size pop‑up menu, choose your envelope size.
If no size matches the envelope size, then set a custom size.
4 Select an orientation, and then click OK.
5 From the menu bar, choose File > Print.
6 From the Printer pop‑up menu, choose your printer.
7 Click Print.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Paper/Fi Finishing tab > > Manage Custom Sizes > New
4 Type a name and adjust the settings as needed to create a custom size, and then click OK.
5 Navigate to:
Paper type list > > select the created custom type
6 Click OK to close any printer software dialogs.
7 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the “Format for” pop‑up menu, choose your printer.
Printing 45

3 From the Paper Size pop‑up menu, choose your paper size.
If no paper size matches the label sheet size, then set a custom size.
4 Select an orientation, and then click OK.
5 From the menu bar, choose File > Print.
6 From the Printer pop‑up menu, choose your printer.
7 From the print options pop‑up menu, choose Quality & Media.
8 From the Paper Type pop‑up menu, choose Labels.
9 From the Print Quality menu, choose a print quality other than Quick Print or Draft.
10 Click Print.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Paper/Fi Finishing tab > > Manage Custom Sizes > New
4 Type a name and adjust the settings as needed to create a custom size, and then click OK.
5 Click Close, and then click OK to close any printer software dialogs.
6 Click OK or Print.
1 With a document open, choose File > Page Setup.
2 From the “Format for” pop‑up menu, choose your printer.
3 From the Paper Size pop‑up menu, choose Manage Custom Sizes.
4 Adjust the settings as needed to create a custom size, and then click OK.
5 Click OK.
6 From the menu bar, choose File > Print.
7 From the printer pop‑up menu, choose your printer.
8 Click Print.
Printing 46

Documents:
Images:
Make sure the flash drive contains files that are supported by the printer. For more information, see “Supported file types” on page 47.
1 Insert a flash drive into the USB port.


2 Follow the instructions or select from available options on the printer display.
Printing 47

1 Load photo paper.
2 Insert a flash drive or digital camera set to mass storage mode.
If image files and document files are stored in the memory device, then press the left or right arrow button to select Photos, and then press
3 Use the up or down arrow button to select a photo printing option, and then press
4 To adjust the print settings, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press
to make a selection.
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer.
1 Insert one end of the USB cable into the camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.

Printing 48 · 5 Press

3 If the PictBridge connection is successful, then the following message appears on the display: Use PictBridge Device to choose and print photos. Press OK to select printer default settings.
4 If you want to change the default print settings: a Press
to access the PictBridge menu. b Press the arrow buttons to select the paper source, paper setup, photo size, number of photos per page and
print quality. You can also enhance the quality of graphics. Press
each time you make a selection.
5 See the documentation that came with the camera to begin printing.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
4 Click the Paper/Fi Finishing tab, and then select a supported paper type.
Printing 49

5 Click OK to close any printer software dialogs.
6 Click OK or Print.
To return to single-sided printing, repeat steps 1 and 2, and then navigate to:
Layout tab > Print on Both Sides (Duplex) ar ea > > Print on one side only
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
6 From the print options pop‑up menu, choose Quality & Media.
7 From the Paper Type pop‑up menu, choose a supported paper type.
8 From the print options pop‑up menu, choose Layout.
9 From the Two‑Sided pop‑up menu, choose Long‑Edge binding or Short‑Edge binding. • For Long‑Edge binding, pages are bound along the long edge of the page (left edge for portrait, top edge for landscape).




10 Click Print.
Printing 50 · Portrait Landscape · Portrait Landscape

1 From the printer control panel, navigate to:
> Print Mode Setup >
> Page Dry Time >
2 Press the up or down arrow button to scroll to the dry time setting you want, and then press
1 Click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Layout tab > Print on Both Sides (Duplex) ar ea > > select a dry time setting
4 Click OK.
1 From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer
2 Navigate to:
Open Print Queue > Printer Setup > Driver tab
Printer Setup > Installable Options
3 From the Two‑Sided Printing Dry Time pop‑up menu, choose a dry time setting.
4 Click OK or Apply Changes.

A print queue represents the printer that is connected to your computer. The print queue name is usually the printer model or the printer nickname assigned when installing or adding the printer.
1 Open the printers folder.
, or click Start and then click Run. b In the Start Search or Run box, type control printers.
c Press Enter, or click OK.
2 Find the print queue for your printer (Network or USB).
3 If the print queue is not in the list, then create a new print queue.
1 From the Apple menu, navigate to:
System Preferences > Print & Fax > the print queue for your printer
2 If the print queue is not in the list, then create a new print queue.
1 From the Printer Tasks area, click Add a Printer.
2 Follow the instructions on the computer screen.
For more information, see the documentation that came with your operating system.
1 From the Print & Fax area, click +.
2 If necessary, click the Default or Default Browser tab.
3 Select your printer from the list.
4 Click Add.

Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually select your printer, then it is not the default printer.
To set the default printer:
, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
The printers folder opens.
4 Right‑click the printer, and then select Set as Default Printer.
1 From the Apple menu, navigate to:
System Preferences > Print & Fax
2 Select the printer from the Default Printer pop‑up menu, or select the printer and click Make Default.
To conserve ink, you can change the default printing mode for all print jobs to Draft or Quick Print. It uses less ink and is recommended for printing text-only documents. If you need to change to a different print mode to print photos or other high-quality documents, then you can select a different mode from the Print dialog before sending the print job.
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Quality tab > select a print quali ty > > OK
1 With a document open, choose File > Print.
2 From the printer pop‑up menu, choose your printer.
3 From the print options pop-up menu, choose Quality & Media.
4 From the Print Quality pop‑up menu, choose a print quality.
5 Click OK.
Printing 53 · 1 Click

, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
The printers folder opens.
4 Right‑click the printer, and then select Open or See what's printing.
1 Click the printer icon on the Dock.
The print queue dialog appears.
, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
The printers folder opens.
4 Right‑click the printer, and then select Open or See what's printing.
1 From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer
2 Click Open Print Queue or Set Up Printers.
The print queue dialog appears.
Printing 54 · 1 Click · 1 Click

To cancel a print job from the printer control panel, press
. Printing stops and the printer returns to the home screen.
, and then press
To cancel a print job from the computer, do the following:
, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
The printers folder opens.
4 Right‑click the printer, and then select Open or See what's printing.
1 Click the printer icon on the Dock.
The print queue dialog appears.
2 Choose the job you want to cancel, and then click Delete.
LexPrint is a free application that lets you print easily from your iPad, iPhone, or iPod touch using any Lexmark printer connected to the same wireless network. It lets you print Web pages, photos from the photo album, or photos you recently captured using the camera of your mobile device, depending on its features. You can also customize print settings from your mobile device.
Depending on your Lexmark printer model, you may need to download the LexPrint Listener application from our Web site at www.lexmark.com/le lexprint.
Printing 55 · 1 Click

LexPrint enables your mobile device to communicate with Lexmark printers found on the same network.
Printing 56

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Use the ADF for multiple‑page documents.
to start copying.
1 Load paper.
2 Load an original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select the number of copies.

5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press
to make a selection.
to switch to color mode. • Press
to switch to black‑and‑white mode.
When you select color or black‑only printing, the light that corresponds to your choice comes on.
1 Load plain A4‑ or letter‑size paper.
2 From the printer control panel, navigate to:
> ID Card Copy
, and then load the front side of the ID card facedown at the placement corner of the scanner glass.
5 When prompted to copy the back side of the ID card, press the left or right arrow button to scroll to Yes, and then press
6 Load the back side of the ID card facedown at the placement corner of the scanner glass, and then press
1 Load paper.
2 Load the original document facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to scroll to the Scale setting you want.
, and then press the left or right arrow button to select a custom percent value. Press

1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to set the copy quality.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select the number of copies.
5 Press the up or down arrow button until Collate appears.
6 Press the left or right arrow button to scroll to On, and then press

A separator sheet is a sheet of paper placed between pages, copies, or jobs based on the setting selected. This feature is useful when printing transparencies.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select a separator sheet setting, and then press
You can copy multiple pages on one sheet by printing smaller images of each page. For example, you can condense a 20‑page document into five pages if you use this setting to print four page images per sheet.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
> Pages per Side
4 Press the left or right arrow button to select the paper orientation and the number of pages that you want to copy on a sheet of paper. You may print up to four page images on one sheet.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select an overlay setting.
. To change a character, press the left arrow button. To add a space, press the number 0.

The Background Removal feature adjusts the amount of background visible on a copy.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select the amount of background removal.
The automatic duplex unit supports A4‑ and letter‑size paper. If you need to make two‑sided copies using other paper sizes, then see the instructions for making a two‑sided copy manually.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to:
> 2‑Sided Copies
until you reach the Copy menu screen.
every time you make a selection, and then press
, and then follow the instructions on the display.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.

3 From the printer control panel, navigate to:
4 Press the left or right arrow button to select the number of copies.
5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press
to make a selection.
to switch to color mode. • Press
to switch to black‑and‑white mode.
When you select color or black‑only printing, the light that corresponds to your choice comes on.
to print on one side of the paper.
9 Remove the paper from the paper exit tray, and then reload the paper with the top edge first to print the other side of the document.
Make sure the printable side of the paper is faceup.

To cancel a copy job, press
, and then press
Scanning stops and the printer returns to the previous menu.

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Use the ADF for multiple‑page documents.
to start scanning.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel, navigate to:
> Computer > USB‑Connected Computer >
The USB‑connected computer will receive the scan by default.
Scanning 63 · ADF Scanner glass · > Scan >

3 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
each time you make a selection.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel, navigate to:
3 Press the left or right arrow button to manually select the name of the destination computer, and then press
4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
each time you make a selection.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel navigate to:
3 Insert the flash drive or memory card, and then press

4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
each time you make a selection.
Follow the instructions on the printer display.
1 Load photo or photos facedown on the scanner glass.
or Start.
3 Click All Programs or Programs, and then select the printer program folder from the list.
4 Navigate to:
Printer Home > select your printer > Scan
Scanning starts and the scan progress dialog appears.
5 Save the photo or photos, and open them in a photo editing application to edit.
1 Load photo or photos facedown on the scanner glass.
2 From the Applications folder in the Finder, launch the application you want to use.
3 From the list of devices, select your printer.
4 Adjust the scan settings as needed.
on the preview dialog for more information.
5 Start the scan job.
6 Save the scanned image, and then edit it using a photo editing application.

An Optical Character Recognition (OCR) application allows you to edit an original text document that has been scanned. In order for this to work, you must have an OCR application stored on a local or network computer and you must be able to select it from the list of applications when you set up the scan.
When selecting settings for the scan, select to scan to the local computer or network computer where the OCR is installed.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
or Start.
3 Click All Programs or Programs, and then select the printer program folder from the list.
4 Navigate to:
Printer Home > select your printer > Scan > Document
Scanning starts and the scan progress dialog appears.
5 When the scan is finished, save the document.
The file will be converted into a format that can be edited.
6 Open the document in the appropriate application to edit it.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the Applications folder in the Finder, launch the application you want to use.
3 From the list of devices, select your printer.
4 Adjust the scan settings as needed.
on the preview dialog for more information.
5 Set the OCR software as the scan destination, and then start the scan job.
6 If necessary, select the format to which you want to convert the file.
7 Save the file.
Scanning 66 · 2 Click · If applicable, click

Make sure you have set up your e‑mail settings before proceeding. For more information, see the section on e‑mailing in the User’s Guide.
1 Load an original document faceup into the ADF or facedown on the scanner glass.
or Start.
3 Click All Programs or Programs, and then select the printer program folder from the list.
4 Navigate to:
Printer Home > select your printer > Scan
5 Select Email photo, Email document, or Email PDF.
Scanning starts and the scan progress dialog appears. When the scan is finished, a new e‑mail message is created with the scanned document automatically attached.
6 Compose your e‑mail message.
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the Applications folder in the Finder, launch the application you want to use.
3 From the list of devices, select your printer.
4 Adjust the scan settings as needed.
on the preview dialog for more information.
5 Set the e‑mail application as the scan destination, and then start the scan job.
6 Compose your e‑mail message.
1 Load an original document faceup into the ADF or facedown on the scanner glass.
or Start.

3 Click All Programs or Programs, and then select the printer program folder from the list.
4 Navigate to:
Printer Home > select your printer > Scan > PDF
Scanning starts and the scan progress dialog appears.
5 Save the document as a PDF.
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the Applications folder in the Finder, launch the application you want to use.
3 From the list of devices, select your printer.
4 Adjust the scan settings as needed.
on the preview dialog for more information.
5 Set the application that supports the PDF format as the scan destination, and then start the scan job.
6 Save the document as a PDF.
Color is the default for all scans. To scan in black and white, press
on the printer control panel.
PINs are a security measure used to restrict the scanned information from going into certain locations, or to keep what is being scanned from being seen or used by others. You may be prompted to enter a PIN if the network computer you are scanning to requires one.
To learn how PINs get assigned to network computers, see the Help for the printer software associated with your operating system.
Scanning 68 · If applicable, click

Do one or more of the following:
, and then press
Scanning stops and the printer returns to the previous menu. • If you are sending the scan job using the printer software, then cancel the scan job from the software dialog.
Scanning 69

Setting up the printer to e-mail
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Navigate to:
Printer Home > select your printer > Settings > Set up the printer to e‑mail
The E‑mail Setup Wizard opens.
4 Follow the instructions on the computer screen.
1 From the Finder, navigate to:
Applications > select your printer folder > Printer Settings > Email
2 Follow the instructions on the computer screen, and then click Save Settings.
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings > E-mail/FT FTP Settings > E-mail Settings.
3 Fill in the fields with the appropriate information.
4 Click Submit.
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
E-mailing 70 · 1 Click · 1 Click

3 Navigate to:
Printer Home > select your printer > Fax > Edit contact list > Select from Phone Book
4 From the Phone Book field, choose a phone book.
You can choose any mail client phone book where you store e‑mail addresses.
5 Select the contact that you want to add, and then click Add to or change list to import the contact.
6 Click OK.
1 From the Finder, navigate to:
Applications > select your printer folder
2 Double‑click Printer Settings.
3 Navigate to:
Contacts tab > > Individuals tab
to open the Address Book.
5 From the Address Book, click and drag the contacts that you want to add to the Contacts list.
For more information, click Help or
to view the help information for the fax software.
Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Use the ADF for multiple‑page documents.
E-mailing 71 · 4 Click · ADF Scanner glass

ADF Scanner glass Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.
If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person.
to start scanning.
Do one or more of the following:
. • If you are sending the e‑mail using the printer software, then cancel the e-mail from the software dialog.
, and then press
E-mailing 72


To connect:
Connect the cable from the wall jack to the
port of the printer.
Faxing 73

Connected to the same telephone wall jack

To connect:
1 Connect the cable from the wall jack to the
port of the printer.
2 Remove the protective plug from the
port of the printer, and then connect the answering machine to the port.
Connected to different wall jacks

To connect:
Connect the cable from the wall jack to the
port of the printer.
Faxing 74


To connect:
1 Connect the cable from the wall jack to the
port of the printer.
2 Remove the protective plug from the
port of the printer, and then connect the telephone to the port.
Faxing 75

When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the telephone to receive the fax. • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax.

A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.
To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer.
To install a filter for the printer:
1 Connect the line port of the DSL filter to the wall jack.
2 Connect a telephone cable from the
port on the back of the printer to the phone port on the DSL filter.
Faxing 76

3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter.
4 To connect a telephone to the printer, remove the protective plug from the
port of the printer and then connect the telephone to the port.

1 Connect one end of a telephone cable to the
port of the printer.
2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.
The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP provider if you want to activate the second phone port.
3 Remove the protective plug from the
port of the printer, and then connect the telephone to the port.
Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.
Faxing 77

Follow this setup if you normally connect your telephone to a cable modem.

To connect:
1 Connect one end of a telephone cable to the
port of the printer.
2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.
The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider if you want to activate the second phone port.
3 Remove the protective plug from the
port of the printer, and then connect the telephone to the port.
Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.
Faxing 78

Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house
Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the wall jacks.

To connect:
1 Connect the cable from the wall jack to the
port of the printer.
2 Remove the protective plug from the
port of the printer, and then connect the telephone to the port.
Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.

The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11 connectors. If you have a different type of connector in your country or region, then you may need to use an RJ‑11 adapter.
Faxing 79

Connecting the printer to a non‑RJ‑11 wall jack

To connect:
1 Connect one end of a telephone cable to the
port of the printer.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.
3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ 11 connector, then connect it directly to the wall jack.
port of the printer. • The printer may not come with an RJ-11 adapter in your country or region.
Faxing 80

If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove the wrap plug and connect the device to the
port of the printer.

In some countries or regions, you need to plug all devices into the wall jack. You cannot plug a telephone or answering machine into the
port of the printer. This is called serial connection.
Finland Norway United Kingdom
port of the printer. It is necessary for the proper functioning of the devices on the telephone line.

To connect:
Connect the cable from the wall jack to the
port of the printer.
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.

Faxing 82

Connect the printer to any of the N ports.

To connect:
1 Connect one end of a telephone cable to the
port of the printer.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to an N port.
3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown.
Your user information includes your name or your company name, your fax number (which is your telephone number, unless you have a dedicated fax telephone line), and the time and date on your fax machine when a transmission is made. This information appears in the header and footer of the faxes that you send.
In some countries, you cannot send a fax without this information. Some fax machines block faxes without sender information, so make sure that you enter this information in your printer.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Fax Name >
2 Enter your name or your company name, and then press
3 Press the arrow buttons to scroll to Fax Number, and then press
4 Enter your fax number or your telephone number, and then press
Faxing 83 · > Setup >

From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Fax Footer >
1 From the printer control panel, navigate to:
> Device Setup >
> Date/Ti Time >
2 Enter the date, and then press
3 Enter the time, and then press
You can configure the fax settings through the printer control panel or the fax software. If you configure the fax settings in the printer control panel, then the fax software imports those settings. The changes appear the next time you launch the fax software. The printer also saves the settings that you choose in the fax software, unless you set the printer to block changes made from the computer.
1 From the printer control panel, navigate to:
> Fax Setup >
2 Configure the fax settings using the selections in the menu:
From here You can
Address Book Set up, view, or print the Address Book.

From here You can
2‑Sided Faxes • Set the printer to print incoming faxes on both sides of the paper.
Fax Blocking Block unwanted incoming faxes.
Before you begin, make sure that:
to wake up the printer.
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Click Printer Home > Fax > Set up the printer to fax.
The Fax Setup Wizard opens.
4 Run the Fax Setup Wizard. Make sure you select the correct telephone service and connection. The wizard configures optimal fax settings based on your connection.
1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2 Double-click Printer Settings.
3 Configure the fax settings using the printer software.
To view the help information for the fax software, click Help or
Faxing 85 · 1 Click

You can create a contact list using the Address Book in the printer control panel or the phone book in the fax software. If you create a contact list in the printer control panel, then the fax software automatically saves those contacts as Phonebook entries. Likewise, when you add contacts to the fax software, the printer automatically saves them to the printer Address Book.
You can save up to 89 contacts and 10 fax groups in the contact list.
1 From the printer control panel, navigate to:
> Fax Setup >
> Address Book >
2 To add a fax number to your Address Book: a Press the arrow buttons to scroll to Add Entry, and then press
. b Use the keypad to enter the contact name in the Name field.
to save the entry. e If you want to add another entry, then repeat steps a through d.
3 To add a fax group: a Press the arrow buttons to scroll to Add Group, and then press
. b Use the keypad to enter a group name, and then press
when you make a selection.
. • If you want to import a contact, then press the arrow buttons to select a contact from the Address Book. Press
when you make a selection. d When you are finished adding contacts to the group, select Done.
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Click Printer Home > Fax > Edit contact list.
The Contacts tab of the Printer Setup Utility opens.
4 Click Select from phonebook.
Faxing 86 · > Setup > · 1 Click

5 From the Phonebook field, choose a phone book.
6 Select the contact that you want to add, and then click Add to or change list to import the contact.
7 Click OK.
1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2 Double-click Printer Settings.
to open the Address Book.
5 From the Address Book, click and drag the contacts that you want to add to the Contacts list.
For more information on the fax software, click Help or
Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Use the ADF for multiple‑page documents.
Faxing 87 · 4 Click · ADF Scanner glass

to send the fax.
1 From the printer control panel, navigate to:
2 Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list.
3 If you want to send a fax to a single recipient, then press
If you want to send a fax to a group of numbers (broadcast fax), then press the left or right arrow button to enter another number, and then press
. Repeat this step to add more numbers.
4 Press the Color/Bl Black button to select a color or black‑and‑white fax.
to start the fax job.
ports while actively sending a fax.
1 With a document open, click File > Print.
2 Make sure the appropriate printer is selected, and then click Properties, Preferences, Options, or Setup.
3 Click the Fax tab, and then make sure Enable Fax is selected.
4 Enter the recipient fax number or numbers in the “Fax number(s)” field.
You can enter fax numbers manually or by using the Phone Book feature.
5 If necessary, enter a prefix in the Dialing Prefix dialog.
6 Select the appropriate paper size and page orientation.

7 Select Include Cover Page with Fax, and enter the appropriate information if you want to include a cover page with the fax.
8 Click OK.
1 With a document open, choose File > Print.
2 From the Printer pop‑up menu, select the fax version of your printer.
3 Enter the name and number of the recipient.
4 Click Fax.
When receiving faxes:
1 Make sure that Auto Answer is on:
From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Auto Answer >
2 Set the number of rings before the printer picks up incoming faxes: a Press the arrow buttons to scroll to Pick Up On, and then press
. b Press the arrow buttons to scroll to the number of rings that you want, and then press
to save the setting.
When the number of rings you set is detected, the printer automatically receives the incoming fax.
ports while actively receiving a fax.

1 Turn off Auto Answer:
From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Auto Answer >
2 When the telephone rings and you hear fax tones when you pick up the handset, press
on the printer or *9* on the telephone attached to the printer.
ports while actively receiving a fax.
port on the back of the printer and that the printer is connected to the wall jack through the
port.
If I skipped the fax setup initially, do I need to run the installer again to set up the fax?
You do not need to run the installer again. You can set up and configure the fax through the fax software that was installed with the printer software.
1 Connect the printer to the telephone line. For more information, see “Setting up the printer to fax” on page 73.
2 Configure the fax settings using the fax software. To access the fax software:
or Start. b Click All Programs or Programs, and then select the printer program folder from the list.
c Click Printer Home > Fax >Set up the printer to fax. The Fax Setup Wizard opens. d Run the wizard. Make sure you select the correct telephone service and connection. The wizard configures
optimal fax settings based on your connection.

a From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. b Double-click Printer Settings, and then configure the fax settings.
If there are limited wall jacks in your home or limited ports on your adapter, then you can use a phone splitter. A splitter splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more ports where you can plug the devices. Do not use a line splitter.
To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.
In most cases, your telephone number is also your fax number. If you subscribe to the Distinctive Ring Pattern Detection (DRPD) service offered by telephone companies, then your fax number is the number that you assigned to the printer. Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in the Fax Setup menu of the printer control panel.
If you have more than one telephone line, then make sure that you enter the number for the line on which the printer is connected.
The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or telephone number. If the printer is in an office setting or in a private branch exchange, then this can be a specific number that you need to press so you can make a call outside the office. This can also be a country code or an area code that you need to enter if you are sending faxes outside of town. This can be very useful if you frequently send faxes to the same country or area. When you set the dialing prefix in the utility, the printer automatically inputs the prefix when you dial the fax number or telephone number.
You can enter up to 8 characters as your dialing prefix. The valid characters are the numbers 0–9, the letters P and W (uppercase and lowercase), and the characters pound (#) and star (*). If you are using the fax software to enter the dial prefix, then you may also include the characters minus and comma.
Auto Answer is set to On by default, which lets the printer receive faxes automatically.
If the printer is connected to the same telephone line with an answering machine, then you must set Auto Answer to On so that you can receive both your voice calls and your faxes. Make sure that the answering machine is set to pick up on fewer rings than the rings set in the printer. This lets the other devices pick up the voice calls first. If an incoming call is a fax, the printer can detect fax signals on the line and takes the call.
Faxing 91

If the printer is sharing a line with an answering machine, then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings that you want.
Setting the correct ring is important if you subscribe to the Distinctive Ring Pattern Detection (DRPD) feature offered by telephone companies. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let you know what telephone number was dialed, and what device you should use to answer the call.
Assign one of your telephone numbers to the printer as the fax number, and then set the printer to answer the ring pattern of that number. If the pattern is set incorrectly, then the printer rings, but it never receives the fax.
Distinctive Ring is also called Ident-a-Call, Smart Ring, Teen Ring, RingMaster, or IdentaRing.
1 From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Ring Pattern >
2 Press the arrow buttons to scroll to the ring pattern you want, and then press
A dial tone lets you know if the telephone line is working or if the printer is properly connected to the telephone line. If you encounter problems sending and receiving faxes, then make sure you can hear a dial tone on the line and through the printer.
1 Plug an analog telephone into the wall jack.
2 Listen for a dial tone through the telephone handset.
If you hear a dial tone, then the telephone line and the wall jack are working.
If you do not hear a dial tone, plug the analog telephone into a second wall jack, and then listen for a dial tone. If you hear a dial tone, then the telephone line is working but the first wall jack is not working.
1 While the printer is connected to a telephone line through the
port on the back of the printer, plug an analog telephone into the
port of the printer.
2 Listen for a dial tone.
If you hear a dial tone, then the telephone line is working and properly connected to the printer.
If you do not hear a dial tone through both the wall jack and the printer, then see the “Fax troubleshooting checklist” on page 155.
Faxing 92 · > Setup >

Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected properly in your telephone network. If you set the printer to receive faxes manually, then make sure that you set the ringer volume loud enough for you to hear it.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Speaker Volume >
2 Press the up or down arrow buttons to select a dial volume setting, and then press
1 From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Ringer Volume >
2 Press the up or down arrow buttons to select a ringer volume setting, and then press
How can I make sure that fax calls go to the printer and voice calls go to the answering machine?
To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
Voice mail and fax can share the same telephone line if you subscribe to a distinctive ring service offered by your telephone company. This feature allows you to have multiple telephone numbers on one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let you know which telephone number was dialed, and which device you should use to answer the call.
If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to turn off voice mail whenever you are expecting a fax.
The resolution, or fax quality, of the documents that you send may affect fax transmission. The receiving fax machine may not support high resolutions and may not be able to receive your fax. You can fix this by enabling Auto Fax Conversion, but the automatic conversion may result in an unreadable fax, especially if the original document is already blurred.
Faxing 93 · > Setup > · > Setup >

Choose a fax quality that best suits the capacity of the receiving fax machine and the quality of the original document.
Quality Black resolution Color resolution
Standard 200 x 100 200 x 200
Fine 200 x 200 200 x 200
Superfine 300 x 300 200 x 200
Ultrafine 300 x 300 (half‑toned) 200 x 200
When sending a fax, after entering the fax number, press the arrow buttons to select a fax quality, and then press
1 From the printer control panel, navigate to:
2 Enter the fax number of the recipient, or press Address Book to select a number from the Speed Dial or Group Dial list.
3 Press the arrow buttons to scroll to Schedule Fax.
4 Enter the time you want to send the fax, and then press
to start scanning the document and to save the scheduled fax.
The printer sends the fax at the designated time. Do not turn off the printer or unplug it from the telephone line before the scheduled time.
1 Press Dial tone.
You should hear the dial tone of the telephone line.
2 Enter the calling card information, and then when you are connected to the telephone carrier, follow the prompts.
3 When prompted, enter the fax number of the recipient, and then press
You can set the printer to print a confirmation page, or transmission report, every time you send a fax. This report includes the date and time that the fax was sent. If the fax job is unsuccessful, then the report also includes the cause of the error.
1 From the printer control panel, navigate to:
> Fax Setup >
> Fax Reports >
> Transmission Log Printing >

You can print reports of sent or received faxes, or both.
1 From the printer control panel, navigate to:
> Fax Setup >
> Fax Reports >
1 From the printer control panel, navigate to:
> 2‑Sided Faxes >
> Fax Setup >
1 From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Fax Forward >
2 Press the arrow buttons to scroll to Forward or Print & Forward, and then press
3 Using the keypad, enter the number to which you want to forward the fax, and then press
When you enable this option, all the faxes that you receive are automatically forwarded until you disable it.
To disable fax forwarding, return to the Fax Forward menu, and then select Off.
You can block faxes from specific numbers. You can also block junk faxes and faxes from unidentified senders (senders without a Caller ID). This feature is helpful if you want to receive faxes automatically but want to filter the faxes that you receive.
1 Turn on fax blocking.
From the printer control panel, navigate to:
> Fax Setup >
> Fax Blocking >
> Turn On/Of Off >
2 Add a number to block. a Press the arrow buttons to scroll to Add, and then press
. b Use the keypad to enter the name of the person you want to block.
c Press the down arrow button to move the cursor to the Number field.

d Use the keypad to enter the fax number, and then press
. e Repeat steps 2b through 2d until you have added all the numbers that you want to block. You can block up to
50 numbers.
3 Block unidentified faxes (faxes without a Caller ID number). a Press the arrow buttons to scroll to Block No ID, and then press
. b Press the arrow buttons to scroll to On, and then press
to save the setting.
The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper, then you can print the fax later after the error is resolved.
However, you cannot retrieve a failed fax if the failure is due to power loss. In this case, the printer automatically prints an error report the next time it is turned on. For incoming faxes, the error report lets you know who sent the fax and how many pages were not printed. For outgoing faxes, it lets you know how many pages were not sent.
Faxing 96

Installing the printer on a wireless network
Your printer may contain an IEEE 802.11b, IEEE 802.11g, or IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/ g/n ro n routers that are Wi-Fi certified.
The printer supports three wireless security options: WPA2/WP WPA, WEP, and no security.
WPA (Wi-Fi Protected Access) and WPA2 (Wi-Fi Protected Access 2) offer stronger wireless network security than WEP. WPA2 and WPA are similar types of security. WPA2 uses a more complex encryption method and is more secure than WPA. Both WPA2 and WPA use a series of characters, called the WPA pre‑shared key or passphrase, to protect wireless networks from unauthorized access.
WPA2/WP WPA passphrases must be:
or • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a keyboard. ASCII characters in a WPA passphrase are case-sensitive.
Every device on the wireless network must use the same WPA passphrase. WPA security is an option only on infrastructure networks with access points (wireless routers) and network cards that support WPA. Most newer wireless network equipment also offer WPA2 security as an option.
WEP (Wired Equivalent Privacy) is the most basic and the weakest type of wireless security. WEP security relies on a series of characters called the WEP key.
Every device on the wireless network must use the same WEP key. WEP security can be used on both ad hoc and infrastructure networks.
Networking 97

A valid WEP key has:
or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a keyboard.
It is not recommended to use no security at all on a home wireless network. Using no security means that anyone within range of your wireless network can use your network resources—including Internet access— if your wireless network is connected to the Internet. The range of your wireless network may extend far beyond the walls of your home, allowing access to your network from the street or from your neighbors’ homes.
A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the printer.
1 Load plain paper.
2 From the printer control panel, navigate to:
> Network Setup >
> Print Network Setup Page >
To set up the printer for wireless printing, you need to know the following:
To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came with the access point (wireless router), see the Web page associated with the access point, or consult your system support person.
If your access point is using WEP security, then the WEP key should be:
or • Exactly 5 or 13 ASCII characters
If your access point is using WPA or WPA2 security, then the WPA/ WPA2 preshared key/pass passphrase should be: • Exactly 64 hexadecimal characters
or • From 8 to 63 ASCII characters
Networking 98 · > Setup >

If your wireless network is not using security, then you will not have a security key.
Note: If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter and look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person.
The Wireless Setup Utility does not detect the wireless network SSID for you during advanced wireless setup. You must know the following information before configuring the wireless printer settings manually:
Check your wireless network type:
Infrastructure—All devices on a wireless network communicate with each other through an access point (wireless router). Ad Hoc—Network devices communicate directly with each other without the use of centralized security or access point. Ad hoc mode may be available only in select printer models or operating systems.
This is the identifying name that distinguishes a network from other networks in the area.
Auto is selected by default and cannot be changed if the network is configured in infrastructure mode.
Determine if you have an infrastructure or ad hoc setup, and then check the corresponding authentication type.
Wireless mode Authentication type
Ad hoc Open Mode
Networking 99

Check the encryption method used on your network.
Authentication type Encryption method
Before you install the printer on a wireless network, make sure that:
1 Close all open software programs.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Follow the instructions on the computer screen.
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double-click the software installer package, and then follow the instructions on the computer screen.
Once the printer is set up on the wireless network, it can be accessed wirelessly by any other computer on the network. However, you will need to install the printer driver on every computer that will access it. You do not need to configure the printer again, although you will need to run the setup software on each computer to install the driver.
1 Close all open software programs.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Follow the instructions on the computer screen for installing a configured printer on a new computer.
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3 Double-click the software installer package.
4 Select My printer is already set up. I am installing it on a new computer.
5 Click Continue, and then follow the instructions on the computer screen for installing a configured printer on a new computer.
The Wi‑Fi or Ethernet indicator light shows the network status of the printer.
Networking 101 · a Click

Indicator l light Printer s status
Check if the SSID, WEP key or WPA/WPA2 preshared key/passphrase, security type, and IP address that the printer uses are still correct.
The following instructions apply to customers outside of North America who are using a wireless broadband box. Some examples of these boxes include LiveBox, AliceBox, N9UF Box, Freebox, and Club Internet.
1 Set up your printer for wireless networking using the setup instructions provided.
Stop when you are prompted to select a network.
2 If there is an association/re registration button on the back of your box, then press it before selecting a network.
3 Return to the computer screen.
From the wireless networks list that appears, select your network, and then click Continue.
If your wireless network does not appear in the list, then:
a Connect to another wireless network.
Click Unlisted Network.
Networking 102 · For Windows users

Select Other Wireless Network from the list, and then click Continue. b Enter the details about your wireless network.
4 Follow the instructions on the computer screen to complete the installation.
The printer is automatically assigned an IP address through DHCP on most networks.
1 Complete the wireless or Ethernet setup, allowing the printer to receive a DHCP address from a DHCP server on the network.
2 Print a network setup page to see the IP address currently assigned to the printer.
3 Open a Web browser, and then type the printer IP address in the address field. Press Enter.
4 Click Configuration > TCP/IP IP > Set static IP address.
5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.
To verify, type the static IP address in the Web browser address field, and then press Enter.
For more information, contact your system support person.
To change the wireless settings on the printer, such as the configured network and the security key, do the following:
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
4 Follow the instructions on the computer screen.
1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2 Double‑click Wireless Setup Assistant.
3 Follow the instructions on the computer screen.
Networking 103 · For Macintosh users · 1 Click

Before you begin, make sure:
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
4 Follow the instructions on the computer screen.
1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2 Double‑click Wireless Setup Assistant.
3 Follow the instructions on the computer screen.
Networking 104 · 1 Click

If your printer or device has not yet been configured for wireless connection and you want to configure it using WPS, then push the WPS button on the wireless router. Wait for the printer control panel to display a message to begin WPS configuration. There might be a short delay before the message appears. If nothing happens after 30 seconds, then do one of the following:
1 From the printer control panel, navigate to:
> Network Setup >
> Wireless 802.11b/ g/n n >
> Network Connection Setup >
> Wi‑Fi Protected Setup >
> WPS PBC Mode >
2 Follow the instructions on the printer display.
1 From the printer control panel, navigate to:
> Network Setup >
> Wireless 802.11b/ g/n n >
> Network Connection Setup >
> Wi‑Fi Protected Setup >
> WPS PIN Mode >
2 Follow the instructions on the printer display.
Simple wireless networks require WEP keys or a WPA/WPA2 preshared key/passphrase, or may not have any security at all. More‑advanced wireless network security can require one or more certificates and an authentication server. If the network requires a certificate and you do not have it, then fill out the certificate request form provided within the Wireless Setup Utility and follow the procedure of your organization in requesting a certificate for network access.
The following is a list of supported types of wireless network security and their requirements:
WPA Personal, WPA2‑Personal or WPA2‑Enterprise
EAP‑MD5, MSCHAPv2, or LEAP

The information to complete is dependent on the 802.1X security mechanism you select. Some require user names, passwords, and/or certificates. If your network contains multiple access points with different modes of authentication, then you can select and configure more than one authentication mechanism.
1 From the Configure 802.1X Authentication dialog, select an authentication mechanism.
If you have selected Do this
EAP‑MD5, LEAP, or MSCHAPv2
Proceed to the next step.
PEAP or EAP‑TTLS Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to locate the certificate file.
EAP‑TLS a Click Install Signed Certificate, and then type the path to the signed certificate, or click Browse to locate the certificate file. b Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to locate the certificate file.
2 Type the necessary information that the authentication server requires.
3 Click OK, and then follow the instructions on the computer screen.
Information you will need to set up the printer on an Ethernet network
Make sure you have the following information before you begin:
Networking 106

Before you install the printer on an Ethernet network, make sure that:
1 Close all open software programs.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then launch the CD manually:
, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Follow the instructions on the computer screen.
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3 Double-click the software installer package.
4 Follow the instructions on the computer screen.
You can change the way you access your printer, depending on your needs. The following procedures assume that you have configured your printer for one type of connection and that the printer drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.
Networking 107 · a Click

Select the connection type that describes how you currently access your printer:
If the printer is currently set up locally (using USB connection)
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
4 Follow the instructions on the computer screen.
If the printer is currently set up for Ethernet
1 Unplug the Ethernet cable from the printer.
2 Place the printer close to the computer you want to use to configure the printer for wireless access.
or Start.
4 Click All Programs or Programs, and then select the printer program folder from the list.
5 Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
6 Follow the instructions on the computer screen.
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1 Attach a USB cable to the computer and to the printer.
2 Wait a moment for Windows to locate the driver and finish setting up the printer.
3 Select the USB printer. See “Selecting a printer” on page 109.
If the printer is currently set up for wireless
1 Attach a USB cable to the computer and to the printer.
2 Wait a moment for Windows to locate the driver and finish setting up the printer.
3 Select the USB printer. See “Selecting a printer” on page 109.
Networking 108 · 1 Click · 3 Click

Select the connection type that describes how you currently access your printer:
If the printer is currently set up for wireless
1 Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.
2 Wait one minute for the Ethernet network adapter to become active and acquire an IP address from the network.
3 Select the Network printer. See “Selecting a printer” on page 109.
If the printer is currently set up locally (using USB connection)
1 Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.
2 Insert the Software and Documentation CD into the computer you want to use to configure the printer.
3 Follow the instructions on the computer screen for configuring a printer on an Ethernet network.
4 Select the Network printer. See “Selecting a printer” on page 109.
1 Open the printers folder.
or Start. b In the Start Search or Run box, type control printers.
c Press Enter, or click OK.
2 Right‑click the printer you want to use (Network or USB).
3 Select Set as Default Printer from the menu.
4 Close the “Printers” or “Printers and Faxes” window.
You can change the way you access your printer depending on your needs. The following procedures assume that you have configured your printer for one type of connection and that the drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.
Select the connection type that describes how you currently access your printer:
Networking 109 · a Click

If the printer is currently set up locally (using USB connection)
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3 Double‑click Lexmark Extras > Lexmark Setup Assistant.
4 Follow the instructions on the computer screen.
If the printer is currently set up for Ethernet
1 Unplug the Ethernet cable from the printer.
2 Place the printer close to the computer you want to use to configure the printer for wireless access.
3 Close all open applications.
4 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
5 Double‑click Lexmark Extras > Lexmark Setup Assistant.
6 Follow the instructions on the computer screen.
7 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1 Firmly plug the square end of the USB cable into the back of the printer.
2 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
3 Add the printer. See “Adding the printer” on page 111.
4 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.
If the printer is currently set up for wireless
1 Attach a USB cable to the computer and to the printer.
2 Add the printer. See “Adding the printer” on page 111.
3 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless connection.
Networking 110

Select the connection type that describes how you currently access your printer:
If the printer is currently set up for wireless
1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.
2 Wait a minute for the Ethernet network adapter to become active and acquire an IP address from the network.
3 Add the printer. See “Adding the printer” on page 111.
4 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless network.
If the printer is currently set up locally (using USB connection)
1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.
2 Insert the installation software CD into the computer you want to use to configure the printer.
3 Follow the instructions on the computer screen.
In Mac OS X X version 10.5 or later
1 From the Apple menu, navigate to:
System Preferences > Print & Fax
2 Click +.
3 Click the Default or Default Browser tab, and then select your printer.
4 Click Add.
In Mac OS X X version 10.4 or earlier
1 From the Finder, choose Utilities.
2 Double‑click Printer Setup Utility or Print Center.
3 From the Printer List dialog, choose the printer you want to use, and then click Add.
4 From the Printer Browser, select your printer, and then click Add.
1 Prepare the computers to share the printer: a Make all computers printing to the printer accessible through Network Neighborhood by enabling File and Print
Sharing. See the Windows documentation for instructions on enabling File and Print Sharing. b Install the printer software on all computers that will print to the printer.
Networking 111

, or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. b Right‑click the name of your printer.
c Click Sharing or Printer Properties. d From the Sharing tab, select Share this printer or Shared as. e Assign a distinctive name, and then click OK.
3 Locate the printer from the remote computer:
, or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. b Right‑click the name of your printer.
c Click Properties or Printer properties. d Click Ports > Add Port > Local Port > New Port. e Type the Universal Naming Convention (UNC) Port Name, which consists of the server name and the distinctive
printer name that was specified in step 2 on page 112. The name should be in the form \\server\printer. f Click OK. g Click Close on the Printer Ports dialog. h Make sure the new port is selected on the Ports tab, and then click Apply.
i Click OK.
1 From the Finder, choose Help > Mac Help.
2 In the Search field, type sharing the printer on a network, and then press return.
4 Follow the instructions on the computer screen.
Networking 112 · 1 Click · 1 Click

Wi‑Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless home network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices.
The printer supports the following methods in connecting to a wireless network:
Look for any of these identifier marks to check if your access point is WPS certified:
You can find these WPS logos on the side, back, or top of your access point.
For more information on accessing the wireless settings and determining the WPS capability of your access point, see the documentation that came with the access point or contact your system support person.
in the documentation they provided. • See the documentation that came with your access point (wireless router).
If your access point is using the default settings, then you can find the information in the documentation. • View the security settings on the access point. 1 Open a Web browser, and then type the IP address of the access point in the address field. Press Enter.
– To obtain the IP address of the access point, see the documentation that came with it or contact your
system support person. – If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Enter the user name and password for the access point when prompted.
Networking 113

A Service Set Identifier (SSID) is the name that identifies a wireless network. All devices on the network must know the SSID of the wireless network, or they will not be able to communicate with each other. Usually, the wireless network broadcasts the SSID to allow wireless devices in the area to connect to it. Sometimes, the SSID is not broadcast for security reasons.
If the SSID of your wireless network is not broadcast, then it cannot be detected automatically and will not show up in the list of available wireless networks. You must enter the network information manually in this situation.
An SSID can contain up to 32 alphanumeric characters. Alphanumeric characters are a combination of alphabetic (letters A to Z) and numeric (numbers 0 to 9) characters.
Most access points have a built‑in Web server that can be accessed using a Web browser. • Check your computer to see if a program was installed with your wireless network adapter.
Many network adapters provide a software application that allows you to view the wireless settings of your computer, including your SSID.
If you are unable to locate your SSID using either of these methods, then contact your system support person.
A network is a collection of devices such as computers, printers, Ethernet hubs, access points, and routers connected together for communication through cables or through a wireless connection. A network can be wired, wireless, or designed to have both wired and wireless devices.
How do I find out what type of security my network is using?
If you are not using a password, then choose None or No Security.
Exactly 10 or 26 hexadecimal characters or Exactly 5 or 13 ASCII characters
Exactly 64 hexadecimal characters or
From 8 to 63 ASCII characters
– Hexadecimal characters are A–F, a–f, and 0–9.
Networking 114 · Characters Security type · WPA or WPA2

– ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA/WPA2
preshared key/pa passphrase are case‑sensitive. • View the security settings on the access point. 1 Open a Web browser. Type the IP address of the access point in the address field, and then press Enter.
– To obtain the IP address of the access point, see the documentation that came with it, or contact your
system support person. – If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Enter the user name and password for the access point when prompted.
For desktop computers, laptops, and printers to communicate with each other over a network, they must be connected by cables and/or or have wireless network adapters built in or installed in them.
There are many different ways a network can be set up. Four common examples appear below.

Networking 115




Networking 116

A Universal Serial Bus (USB) cable is primarily used to connect a USB device to a host. Common hosts include computers and video game consoles. Through the USB port and cable, it is possible to connect computer peripherals such as mouse devices, keyboards, digital cameras, printers, personal media players, flash drives, and external hard drives. For many of those devices, USB has become the standard connection method.
When setting up the printer on your wireless network, the printer will need to temporarily connect to a computer using the USB cable. This temporary connection may be used to set up the wireless settings of the printer.
The USB cable attaches to a USB port on the computer and to the square connector on the back of the printer. This connection allows you to configure the printer for a network or local (USB) installation.
The USB port on the computer and on the printer are each marked with
1 If the USB port at the back of the printer is covered by a sticker, then make sure to remove it.

Networking 117

2 Firmly plug the square end of the USB cable into the back of the printer.

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.

4 Follow the instructions on the computer screen.
Wireless networks can operate in one of two modes: infrastructure or ad hoc.
In infrastructure mode, all devices on a wireless network communicate with each other through an access point (wireless router).
In ad hoc mode, a computer with a wireless network adapter communicates directly with a printer equipped with a wireless print server.
Communication Through an access point Directly between devices
Security More security options WEP or no security
Range Determined by the range and number of access points
Restricted to the range of individual devices on the network
Speed Usually faster Usually slower
Networking 118 · Infrastructure Ad hoc · Characteristics

Requirements for all devices
Unique IP address for each device Yes Yes
Mode set to Infrastructure mode Ad hoc mode
Same SSID Yes, including the access point Yes
Same channel Yes, including the access point Yes
We recommend setting up a network in infrastructure mode using the installation software CD. Infrastructure mode provides:
The signal strength tells you how strongly the computer or printer is receiving the wireless signal from the wireless network. Poor signal quality could affect connectivity during configuration.
1 From your computer system tray, click the wireless icon that corresponds to the software managing your wireless network adapter.
2 Check the signal quality.
In the Wireless section, look for Quality. • View the signal strength from the printer control panel.
Navigate to:
> Network Setup >
> Wireless 802.11 b/ g/n n >
> Network Connection Setup >
> View Signal Quality >
To improve signal quality, remove sources of interference or move wireless devices closer to the access point (wireless router).

A common reason wireless printers fail to communicate over a network is poor wireless signal quality. If the signal is too weak, too distorted, or blocked by an object, then it cannot carry information between the access point (wireless router) and the printer.
If you think signal strength is a problem between your access point and the printer, then try one or more of the following:
To determine if the printer is receiving a strong signal from the access point, print a network setup page. The Quality field indicates the relative strength of the wireless signal the printer is receiving. Drops in signal strength can be intermittent, however, and although the signal quality appears high, it may drop during certain conditions. If the signal quality is listed as good or excellent, then another factor is causing the problem.
For more information on printing a network setup page, see the User's Guide.
If the printer is too far away from the access point, then it will not be able to communicate with other devices on the network. For most indoor wireless networks, the maximum distance between the access point and the printer is approximately 100 feet (30 meters). This distance could be longer or shorter, depending upon the layout of the network and the limitations of the access point.
The wireless signal from your access point will pass through most objects. Most walls, floors, furniture, and other objects will not block the wireless signal. However, there are materials that are too dense for the signal to pass through, such as objects containing metal and concrete. Arrange your printer and access point so that the signal is not blocked by such objects.
Other types of radio frequencies can cause problems with the wireless signal on your network, resulting to printing issues that seem to come and go.
Networking 120

Even when the wireless signal is able to pass through an object, it is slightly weakened. If it passes through too many objects, then it can be significantly weakened. All objects absorb part of the wireless signal when it passes through them, and certain types of objects absorb enough to cause communications problems. Place your access point as high in the room as possible to avoid signal absorption.
How can I make sure my computer and printer are connected to the same wireless network?
If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.
1 Obtain the SSID of the network that the computer is connected to: a Type the IP address of your access point (wireless router) in the address field of your Web browser.
If you do not know the IP address of the access point:
c Click OK. d In the Wireless settings section, look for the SSID. e Write down the SSID.
2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID.
3 Compare the SSID of the computer and SSID of the printer.
If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.
If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.
Networking 121 · 1 Click

In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to:
System Preferences > Network > AirPort
The SSID of the network that the computer is connected to is displayed in the Network Name menu.
2 Write down the SSID.
In Mac OS X version 10.4 or earlier
1 From the Finder, navigate to:
Applications > Internet Connect > AirPort
The SSID of the network that the computer is connected to is displayed in the Network menu.
2 Write down the SSID.
1 Type the IP address of the access point in the address field of your Web browser and continue to step 2.
If you do not know the IP address of the access point, then do the following:
a From the Apple menu, navigate to:
System Preferences > Network > AirPort b Click Advanced or Configure.
c Click TCP/IP IP. The Router entry is typically the access point.
2 Type your user name and password when prompted, and then click OK.
3 In the Wireless settings section, look for the SSID.
4 Write down the SSID, security type, and the WEP key/WP WPA passphrase (if shown).
Can I use my printer on a USB and a network connection at the same time?
Yes; the printer supports a simultaneous USB and network connection. The printer can be configured in the following ways:
Networking 122

A Media Access Control (MAC) address is a 48‑bit identifier associated with the hardware of network equipment. The MAC address may also be called the physical address because it is connected to the hardware of a device instead of its software. The MAC address is displayed as a hexadecimal number in this format: 01-23-45-67-89-AB.
While it is possible to change the MAC address of a network device, it is not common practice to do so. For this reason, MAC addresses are considered permanent. IP addresses are easily changed, so MAC addresses are a more reliable method of identifying a specific device on a network.
Routers with security capabilities may allow filtering of MAC addresses on networks. This allows a managed list of devices to access the network, identified by their MAC addresses, as well as prevent access from unwanted devices. If your network uses MAC address filtering, then be sure to add the MAC address of the printer to the list of allowed devices.
Network devices have a unique hardware identification number to distinguish them from other devices on the network. This is called the MAC (Media Access Control) address. Other devices sometimes use a type of MAC address called Universally Administered Address (UAA).
When installing the printer on a network, make sure you select the printer with the correct MAC address.

The MAC address of the internal print server is a series of letters and numbers.

Networking 123

An IP address is a unique number used by devices (such as a wireless printer, computer, or access point (wireless router)) on an IP network to locate and communicate with each other. Devices on an IP network can communicate with each other only if they have unique and valid IP addresses. A unique IP address means no two devices on the same network have the same IP address.
An IP address is a group of four numbers separated by periods. An example of an IP address is 123.123.123.123.
Networks are able to function when computers, printers, and other devices are able to send data to each other, either through cables or wireless signals. This transfer of data is made possible by sets of data transmission rules called protocols. A protocol can be thought of as a language that has rules so that participants can effectively communicate with each other.
Different types of networks use different protocols, but Transmission Control Protocol/In Internet Protocol (TCP/IP) is the most popular. TCP/IP IP is used to send data over the Internet as well as over most corporate and home networks.
Every device on a network that uses TCP/IP must have an IP address. IP addresses are essentially unique computer names in a numeric format, used to transfer data around a network. IP addresses allow TCP/IP to confirm requests for, and receipt of, data by various devices on the network.
, or click Start and then click Run.
2 In the Start Search or Run box, type cmd.
3 Press Enter, or click OK.
4 Type ipconfig, and then press Enter.
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
1 From the Apple menu, navigate to:
About This Mac > More Info
2 From the Contents pane, choose Network.
3 If you are connected over a wireless network, then choose AirPort from the Active Services list.
Networking 124 · 1 Click

In the TCP/IP IP section, look for Address. • View the printer settings.
From the printer control panel, navigate to:
> Network Setup >
> Wireless 802.11 b/ g/n n >
> Network Connection Setup >
> IP Address >
An IP address may be assigned automatically by the network using DHCP. Once the printer is set up on a computer, the computer sends all print jobs across the network to the printer using this address.
If the IP address is not automatically assigned, you will be asked during wireless setup to manually enter an address and other network information after selecting your printer from the available list.
An access point (wireless router) can be configured with as many as four WEP keys. Only one key is used on the network at a time, however. The keys are numbered, and the number of a key is referred to as its key index. All devices on the wireless network must be configured to use the same key index when multiple WEP keys are configured on the access point.
Select the same key index on your printer as you are using on your access point.
Use Guided setup if:
Use Advanced setup if:
Networking 125 · > Setup >

Maintaining the printer 126
Maintaining ink cartridges
In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off.
From the printer control panel, navigate to:
> Check Ink Levels >
or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Navigate to:
Printer Home > select your printer > Maintenance tab > > Supplies Status
1 From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer
2 Click Options & Supplies or Print Queue.
3 Click Supply Levels.
If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead.
1 Load plain paper.
2 From the printer control panel, navigate to:
> Align Printer >
An alignment page prints.
If you aligned the cartridges to improve print quality, then print your document again. If print quality has not improved, then clean the printhead nozzles.

Maintaining the printer 127
If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical outlet to allow it to perform automatic maintenance cycles.
1 Load paper.
2 From the printer control panel, navigate to:
3 Press the up or down arrow button to scroll to Clean Printhead or Deep Clean Printhead, and then press
A cleaning page prints.
1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove all paper from the printer.
3 Dampen a clean, lint‑free cloth with water.
4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray.
5 Make sure the printer is dry before beginning a new print job.
> Setup > · > Maintenance >

Maintaining the printer 128
Clean the scanner glass and other related parts when vertical streaks appear on your printed pages or when you see marks or smudges on such parts.
1 Dampen a clean, lint‑free cloth with water.
2 Gently wipe clean the scanner glass and other related parts.

3 ADF scanner glass
4 ADF press plate
When moving the printer and optional tray to another location, follow these precautions:
1 Backing material · 2 Scanner glass

Maintaining the printer 129


Before you troubleshoot
Use this checklist to solve most printer problems:
for three seconds to turn off the printer.
Visit our Web site at http://supp support.lexmark.com to find the following:
Troubleshooting 130

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
1 From the printer control panel, navigate to:
> Device Setup >
2 Press the up or down arrow button to scroll to the language you want, and then press
3 To confirm the setting, press the left or right arrow button to scroll to Yes, and then press
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
, or click Start and then click Run.
2 In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
3 Press Enter, or click OK.
4 Click Install, and then follow the instructions on the computer screen.
1 From the Finder desktop, click the CD icon.
2 Double-click the software installer package, and then follow the instructions on the computer screen.
If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.
Before you reinstall the software, do the following:
T EMPORARILY DISABLE SECURITY PROGRAMS IN W INDOWS BEFORE INSTALLING THE SOFTWARE
C HECK THE USB CONNECTION
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.

3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
1 Turn off the printer.
for three seconds to turn off the printer.
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.
4 Turn on the printer.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
1 Turn the printer on, and then open the printer.
2 Make sure the cartridges are inserted correctly.
The cartridges should click firmly into the matching color slot of the printhead.
3 Close the printer.
SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB
1 With a document open, choose File > Print.
2 From the printer pop-up menu, choose your printer, and then click Print.
If your printer does not appear in the Printer list, then choose Add Printer. From the list of printers in the Default tab, select your printer, and then click Add.
If your printer does not appear in the list, then try either of the following:
M AKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER
Troubleshooting 132

1 Turn off the printer.
for three seconds to turn off the printer.
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.
4 Turn on the printer.
C HECK THE USB CONNECTION
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Printer is printing blank pages
Blank pages may be caused by improperly installed ink cartridges.
1 Reinstall the ink cartridges, see “Replacing ink cartridges” on page 14 for more information.
If the cartridges do not seem to fit, then make sure the printhead is properly seated, and then try installing the cartridges again.
2 Load plain, unmarked paper.
3 From the printer control panel, navigate to:
4 Press the up or down arrow button to scroll to Deep Clean Printhead, and then press
A cleaning page prints.
5 Load plain, unmarked paper.
6 From the Maintenance menu screen, press the up or down arrow button to scroll to Align Printer, and then press
An alignment page prints.
Troubleshooting 133 · > Setup > · > Maintenance >

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
If the power light is blinking on and off slowly, then the printer is in Sleep mode. Press
to wake up the printer.
If the printer will not come out of Sleep mode, then reset the power:
1 Unplug the power cord from the wall outlet, and then wait 10 seconds.
2 Insert the power cord into the wall outlet, and then turn on the printer.
If this problem persists, then check our Web site for updates for your printer software or firmware.
1 Turn off the printer.
for three seconds to turn off the printer.
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.
4 Turn on the printer.
If you have jobs stuck in the print queue and cannot delete them to get other jobs to print, then the computer and printer may not be communicating.
R EMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
Cannot print through USB
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Troubleshooting 134
![Page 135 of the Lexmark 701 user manual — Change [Paper Source] to [Size] Paper](/cdn/reader/1e/1e913a1cc9088954b4e7542e0f8c16c57066ef071e79b073e5058c88a484b436/images/page-135.webp?w=400)
, or click Start and then click Run.
2 In the Start Search or Run box, type devmgmt.msc.
3 Press Enter, or click OK.
The Device Manager opens.
4 Click the plus sign (+) beside Universal Serial Bus controllers.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
Understanding printer messages
Alignment Problem
Try any of the following:
to retry, depending on your printer model. • Press
to clear the message.
Try one or more of the following:
to continue printing the pages that were saved in the printer memory, and then collate the remainder of the print job. • Press
to cancel the current print job.
Try one or more of the following:
to continue printing after loading the correct paper size and paper type in the default paper tray. • Press
to cancel the current job.
Troubleshooting 135 · 1 Click

Try one or more of the following:
to continue printing after loading the correct paper size and paper type in the default paper tray. • Press
to cancel the current job.
The printer is open. Close the printer to clear the message.

The printer cannot communicate with the requested destination. Try one or more of the following:
Try one or more of the following:

Troubleshooting 136

The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following:
for three seconds to turn off the printer. • See the User's Guide or visit the Lexmark Support Web site at http://supp support.lexmark.com for more information.
Try one or more of the following:
to clear the message. • See the User's Guide or visit the Lexmark Support Web site at http://supp support.lexmark.com for a list of supported ink cartridges.
Try one or more of the following:
to clear the message. • See the User's Guide or visit the Lexmark Support Web site at http://supp support.lexmark.com for a list of supported ink cartridges.
You may need to replace the specified ink cartridge soon. Try one or more of the following:
to clear the message and continue printing.
![Page 138 of the Lexmark 701 user manual — Paper Tray [x] Detected](/cdn/reader/1e/1e913a1cc9088954b4e7542e0f8c16c57066ef071e79b073e5058c88a484b436/images/page-138.webp?w=400)
Try one or more of the following:
to clear the message and continue printing. • Press
to cancel the current job.
Try one or more of the following:
to clear the message and continue printing. • Press
to cancel the current job.
Try one or more of the following:
to clear the message.
[x] is the number of the network connection.
Try one or more of the following:
to clear the message. • Turn the printer off and then back on to reset the printer.
Try one or more of the following:
to cancel the current job.
Try one or more of the following:
to clear the message. • Use the arrow buttons to select Change Settings, and then select the paper size and paper type of the media loaded. Press
for each selection.
Troubleshooting 138

Do one or more of the following:
to clear the message.
Try one or more of the following:
to clear the message, and then try printing again. • From the computer, adjust the printer settings to reduce the quality of the print job, and then try printing again.
Try one or more of the following:
to clear the message.
1 Open the printer, and then lift the latch.

2 Remove the printhead.

Troubleshooting 139

3 Wipe the printhead contacts and the contacts inside the printhead carrier using a clean, lint‑free cloth.

4 Reinsert the printhead, and then close the latch until it clicks into place.

5 Close the printer.
Try one or more of the following:

2 Insert the printhead, and then close the latch until it clicks into place.

Troubleshooting 140

3 Close the printer. • Press
Try one or more of the following:

3 Lift the carrier latch.

4 Remove the unsupported printhead.

Troubleshooting 141

5 Insert the supported printhead, and then close the latch until it clicks into place.
One or more cartridges may have been missing for more than two hours since the printer was turned on.
Clean or Deep Clean the printhead to restore print quality.
A cleaning page prints.
Try one or more of the following:
to clear the message. • See the User's Guide or visit the Lexmark Support Web site at http://supp support.lexmark.com for a list of supported ink cartridges.
The scan job exceeds the maximum number of pages. Press
to clear the message and cancel the current scan job.
Try one or more of the following:
to cancel the current scan job.
Troubleshooting 142

Try one or more of the following:
For more information, contact customer support. • Press
to clear the message.
Try one or more of the following:
Try one or more of the following:
to clear the message. • Turn the printer off and then back on to reset the printer.
Try one or more of the following:
Remove the unrecognized USB device and replace it with a supported device.
Remove the unrecognized USB hub.
Troubleshooting 143

1 Lift the scanner unit.
2 Remove the jam clearance cover.

Troubleshooting 144

3 Firmly grasp the paper on both sides, and then gently pull it out.

4 Reattach the jam clearance cover until it clicks into place.

5 Close the printer.
6 Touch OK or press
, depending on your printer model.
1 Pull the tray completely out of the printer.
Troubleshooting 145

2 Firmly grasp the paper on both sides, and then gently pull it out.

3 Insert the tray.
4 Touch OK or press
, depending on your printer model.
1 Firmly grasp the paper, and then gently pull it out.

2 Touch OK or press
, depending on your printer model.
Troubleshooting 146

1 Push down the duplex latches, and then remove the duplex unit.

2 Firmly grasp the paper, and then gently pull it out.

3 Reinsert the duplex unit.
4 Touch OK or press
, depending on your printer model.
Troubleshooting 147

1 Press the ADF button, and then open the ADF cover.
Scenario 1 Scenario 2


2 Firmly grasp the paper on both sides, and then gently pull it out.
Scenario 1 Scenario 2


Troubleshooting 148

3 Close the ADF cover.

4 Touch OK or press
, depending on your printer model.
1 Remove the ADF tray.

2 Firmly grasp the paper on both sides, and then gently pull it out.

Troubleshooting 149

3 Reattach the ADF tray until it snaps into place.

4 Touch OK or press
, depending on your printer model.
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together. Try one or more of the following:
Use only new, unwrinkled paper.
A DJUST THE PAPER GUIDES TO FIT THE LOADED PAPER
Print troubleshooting
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
Troubleshooting 150

Unless you are using the borderless feature, use these minimum print margin settings:
1 With a photo open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
3 Navigate to:
Paper/Fi Finishing tab > select a borderless setti ng > > OK
4 Click Print.
1 With a photo open, choose File > Page Setup.
2 From the “Format for” pop‑up menu, choose your printer.
3 From the Paper Size pop‑up menu, choose a paper size that has “(Borderless)” in its name.
For example, if you loaded a 4 x 6 6 photo paper, then choose US 4 x 6 in (Borderless).
4 Click OK.
5 From the menu bar, choose File > Print.
6 From the Printer pop‑up menu, choose your printer.
7 From the print options pop‑up menu, choose Quality & Media.
8 From the Paper Type pop‑up menu, choose a paper type.
9 From the Print Quality pop‑up menu, choose Best or Photo.
10 Click Print.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
Replace low or empty ink cartridges.
Troubleshooting 151 · For Windows users · For Macintosh users

A LIGN THE PRINTHEAD
C LEAN OR D EEP C LEAN THE PRINTHEAD NOZZLES
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
MANUALLY SELECT A PAPER TYPE THAT MATCHES THE TYPE OF PAPER YOU ARE USING
M AXIMIZE COMPUTER PROCESSING SPEED
Consider upgrading the RAM.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
If your computer is connected to the printer through a USB cable, then try using a different USB cable.
1 If your computer is connected to an Ethernet or wireless network, then turn off the access point (wireless router) and turn it back on.
2 Wait one minute for the printer and computer to reestablish the connection.
Temporarily close unused applications or end processes that are taking too much memory from your computer.
Troubleshooting 152

You may need to change how your computer manages resources and processes.
For more information on improving computer performance, see the documentation that came with your operating system.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
R EMOVE AND REINSTALL THE PRINTER SOFTWARE
Scanner unit does not close
1 Lift the scanner unit.
2 Remove any obstruction keeping the scanner unit open.
3 Lower the scanner unit.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
A DJUST THE SCAN QUALITY FROM THE PRINTER SOFTWARE
REVIEW THE TIPS FOR COPYING, SCANNING, AND IMPROVING PRINT QUALITY
Troubleshooting 153

MAKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE CORRECT
Partial copies or scans of documents or photos
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
MAKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE
S ELECT A PAPER SIZE THAT MATCHES THE LOADED PAPER
MAKE SURE THE ORIGINAL SIZE SETTING MATCHES THE SIZE OF THE DOCUMENT YOU ARE SCANNING
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Scanning takes too long or freezes the computer
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
R ESTART THE COMPUTER
Cannot scan to a computer over a network
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
MAKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE CONNECTED TO THE SAME NETWORK
Troubleshooting 154

Fax troubleshooting
For detailed descriptions of common terms and tasks, see the following:
If you encounter problems sending and receiving faxes, then check the connection first:
1 Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
If you do not hear a dial tone, then contact your line provider.
2 While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the
port of the printer.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.
Check the cable connections for the following hardware, if applicable:
Power supply Answering machine Cable modem Splitter
Telephone VoIP adapter DSL filter RJ‑11 adapter
Troubleshooting 155

If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER
If you did not enter your user information during initial setup, then enter your fax name and fax number. In some countries, you cannot send a fax without entering your fax name or company name. Some fax machines also block unknown faxes or faxes without sender information.
The modem of the printer can transmit data at 33,600 bps. This is the maximum speed at which the printer can send and receive faxes. It is not necessary, however, to set the modem to its fastest transmission capability. The speed of the modem of the receiving fax machine must match or be greater than the speed at which you are sending your fax. Otherwise, your fax will not be received.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Max Send Speed >
2 Select a sending speed, and then press
Errors and blurs may appear in the faxed document if there is too much noise on the line. This option enables the printer to transmit the bad blocks of data again and correct the errors. When a fax has too many errors, the fax may be rejected by the receiving fax machine.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Error Correction >
2 Check to see if error correction is set to On.
If it is not set to On, then press the arrow buttons to select On, and then press
If the receiving fax machine does not support color fax, then this option automatically converts the outgoing color fax to black and white. It also automatically reduces the resolution of the fax to a resolution that the receiving machine can support.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Auto Fax Convert >
2 Check to see if automatic fax conversion is set to On.
If it is not set to On, then press the arrow buttons to select On, and then press
The dialing prefix is the number or series of numbers that you press before you can dial the actual fax number or telephone number. If the printer is in an office setting or in a private branch exchange, this can be a specific number that you need to press so you can make a call outside the office.

Make sure that the dial prefix entered in the printer is correct for your network.
1 From the printer control panel, navigate to:
> Fax Setup >
> Dialing and Sending >
> Dial Prefix >
2 Press the arrow buttons to create or modify the prefix.
3 If the prefix is not correct, enter the correct prefix, and then press
If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP
The fax settings depend on whether the printer is connected to its own fax line or shares the line with other devices.
If the printer is sharing the telephone line with an answering machine, then make sure that the following are set:
If the printer is sharing the telephone line with a telephone subscribed to voice mail, then make sure that the following are set:
The printer is an analog device. If you are using a PBX system, then make sure that the printer is connected to an analog port on the PBX. You may need a digital line converter that converts digital signals into analog signals.
The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it later. However, if the printer memory is full, then the printer may not be able to receive more incoming faxes. An error message appears on the display when the printer memory is full. Resolve the error to free up space in the printer memory.
1 From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Fax Forward >
2 Press the arrow buttons to scroll to Off, and then press
If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume.
Troubleshooting 157 · > Setup > · > Setup >

If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct code when a fax comes in so that the printer can receive it.
1 From the printer control panel, navigate to:
> Fax Setup >
> Ringing and Answering >
> Manual Pickup Code >
2 Copy the manual answer code that appears on the display.
The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in the fax software.
The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD.
You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a VoIP adapter, or a cable modem) before you can open the fax software and configure the fax settings.
Remote Fax Error The receiving fax machine cannot receive the fax. The error on the receiving end could be due to several factors.
Fax Mode Unsupported The receiving fax machine does not support color fax or the scan resolution of the document that you are sending.
Troubleshooting 158 · > Setup >

Unsupported Compression The fax modem of the receiving fax machine does not support data compression. Fax modems compress data to speed up transmission, but the receiving fax modem needs to have the same compression code.
Unsupported Resolution The receiving fax machine does not support the scan resolution of the document that you are sending.
Unrecoverable Fax Error The fax modem encountered critical errors.
Turn off the printer, turn it back on, and then resend the fax.
Fax Modem Error The fax modem of the printer may be busy, or the fax modem may have encountered problems during transmission.
Turn off the printer, turn it back on, and then resend the fax.
Phone Line is connected to the incorrect jack on the back of the machine.
The telephone cable is connected to the wrong port on the back of the printer.
Connect the phone cable to the
port on the back of the printer.
Digital line detected The printer is connected to a digital line.
The printer is an analog device and must be connected to an analog line. To connect the printer to a digital line, you must use a digital line converter or a filter. For more information, see the ”Setting up the printer to fax” section.
The printer cannot detect a dial tone. See the “Fax troubleshooting checklist.”
Phone Line Not Connected
Phone Line Busy Your telephone line or the telephone line of the receiving fax machine is busy. This happens especially if the printer is sharing the line with other devices (telephone, answering machine).
Troubleshooting 159 · Failed to Connect · Phone Line Error

No Answer Auto Answer may have been turned off on the receiving fax machine.
Disable Block No‑ID.
Your printer stopped the call because the incoming fax has no sender information. You may have chosen to block faxes with no Caller ID or faxes without Caller IDs are not allowed in your country or region.
To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.
Before beginning to troubleshoot the wireless printer, verify the following:
Make sure:
Print a network setup page from the printer to check the network settings. • All switches, hubs, and other connecting devices are turned on.
Troubleshooting 160 · No Caller ID · Call Stopped

Make sure:
Check the connectors at both ends for any obvious damage. If possible, use a new cable. • The Ethernet cable is firmly plugged in to the printer and to the network hub or wall connection.
Make sure:
Print a network setup page from the printer to check the network settings. • Your wireless security settings are correct.
Log in to the access point and check the security settings.
Make sure the printer and wireless access point are not separated by poles, walls, or support columns containing metal or concrete.
Try the following solutions in the order they appear until the Continue button becomes active and available:
CHECK IF THE USB CABLE IS SECURELY PLUGGED INTO THE USB PORTS ON BOTH THE COMPUTER AND THE
USB ports are marked with
button is lit. If you have just turned on the printer, then you might need to disconnect the USB cable and then reconnect it.
Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then the port is working.
Troubleshooting 161 · Make sure the

Try using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.
MAKE SURE YOU ARE USING THE CORRECT CD FOR YOUR PRINTER MODEL
Compare the printer model on the CD to the printer model on the printer. The numbers should either match exactly or be within the same series.
If unsure, look for an updated version of the printer software on the Lexmark Web site. For more information, see the printer User's Guide.
1 Turn off the printer.
for three seconds to turn off the printer.
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.
4 Turn on the printer.
1 Close the installer.
2 Remove the CD, and then restart the computer.
3 Insert the CD, and then run the installer again.
MAKE SURE YOUR COMPUTER IS ABLE TO ACKNOWLEDGE USB ACTIVITY ON THE USB PORT
Open the Device Manager to check if it has activity whenever a USB device is connected to a USB port:
, or click Start and then click Run.
2 In the Start Search or Run box, type devmgmt.msc.
3 Press Enter, or click OK.
Troubleshooting 162 · 1 Click

4 Watch the Device Manager window while connecting a USB cable or another device to the USB port. The window refreshes when the Device Manager recognizes the USB connection.
Firewall settings may have stopped the printer from connecting to your computer.
If a firewall is installed on your computer, then do one of the following:
For more information on turning off and updating the firewall, see the help pages of your operating system.
You will lose your connection to a wireless printer on your local network when connected to most Virtual Private Networks (VPNs).
Most Virtual Private Networks allow computers to communicate with only the VPN and no other network at the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless setup on the computer.
To check if the computer is currently connected to a VPN, open your VPN Client software, and then check your VPN connections. If you do not have a VPN Client software installed, then check the connections manually using the Windows VPN Client.
If you would like to have the ability to connect to your local network and to a VPN at the same time, then request the system support person for the VPN to allow split tunneling. Be aware that some organizations will not allow split tunneling due to security or technical concerns.
If you want to connect only to a VPN, then the documents you want to print will not be printed until you have ended the VPN session. If you want to continue printing while connected to a VPN, then connect the printer to the computer using a USB cable. For more information, see the User’s Guide.
Troubleshooting 163

1 From the printer control panel, navigate to:
> Restore Factory Defaults >
2 Press the up or down arrow button to scroll to Restore Network Settings, and then press
3 Press the left or right arrow button to scroll to Yes, and then press
The printer restarts automatically after resetting the wireless settings to factory defaults.
4 When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.
Initial Setup Complete appears on the display.
If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.
Before you reinstall the software, check the troubleshooting checklist, and then do the following:
TURN THE ACCESS POINT (WIRELESS ROUTER) OFF AND THEN BACK ON
Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network connections and resolve connectivity issues.
When you are connected to another network through a VPN connection, you will not be able to access the printer over your wireless network. End your VPN session, and then try printing again.
Select printer features are not available when Demo Mode is turned on.
From the printer control panel, navigate to:
> Demo Mode >
If your access point is using WEP security, then the WEP key should be:
or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WEP key are case‑sensitive.

If your access point is using WPA or WPA2 security, then the WPA passphrase should be:
or • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA passphrase are case‑sensitive.
Wireless broadband boxes in Europe, the Middle East, and Africa such as LiveBox, AliceBox, N9UF Box, FreeBox, or Club Internet may require you to press an association/registration button when adding the printer to your wireless network.
If you are using one of these boxes and need more information, then see the documentation that came with your box, or contact your Internet Service Provider (ISP).
There may be temporary interference from electronic devices such as microwave ovens or other appliances, cordless phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to these devices.
MOVE THE COMPUTER AND/OR PRINTER CLOSER TO THE ACCESS POINT
The range of your wireless network depends on many factors, including the abilities of your access point and network adapters. If you are having trouble printing, then try placing the computer and printer no more than 100 f feet apart.
Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another factor is causing the problem.
MAKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS NETWORK
If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless network.
Troubleshooting 165

1 Obtain the SSID of the network that the computer is connected to. a Type the IP address of your access point into the address field of your Web browser.
If you do not know the IP address of the access point:
c Click OK. d In the Wireless settings section, look for the SSID. e Write down the SSID.
2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID.
3 Compare the SSID of the computer and SSID of the printer.
If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.
If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.
For Macintosh users with an AirPort base station
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to:
System Preferences > Network > AirPort
The SSID of the network that the computer is connected to is displayed in the Network Name menu.
2 Write down the SSID.
In Mac OS X version 10.4 or earlier
1 From the Finder, navigate to:
Applications > Internet Connect > AirPort
The SSID of the network that the computer is connected to is displayed in the Network menu.
2 Write down the SSID.
For Macintosh users with an access point
1 Type the IP address of the access point in the address field of your Web browser, and then continue to step 2.
Troubleshooting 166 · For Windows users · 1 Click

If you do not know the IP address of the access point, then do the following:
a From the Apple menu, navigate to:
System Preferences > Network > AirPort b Click Advanced or Configure.
c Click TCP/IP IP. The Router entry is typically the access point.
2 Type your user name and password when prompted, and then click OK.
3 In the Wireless settings section, look for the SSID.
4 Write down the SSID, security type, and the WEP key/WP WPA passphrase (if shown).
MAKE SURE YOUR OS IS COMPATIBLE WITH WIRELESS PRINTING THROUGH AIRPORT
The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or later.
You may see a message during installation indicating that the printer does not have a wireless print server installed. If you are sure the printer is capable of wireless printing, try the following:
light is on.
Try one or more of the following:
MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK
If you are using a laptop and have power saving settings enabled, then you may see the ”Communication not available” message on your computer screen when you attempt to print wirelessly. This can occur if the laptop hard drive has powered down.
If you see this message, then wait a few seconds and then try to print again. The laptop and printer require a few seconds to power up again and reattach to the wireless network.
If you see this message again after you have waited long enough for the printer and the laptop to attach to the network, then there may be a problem with your wireless network.
Make sure that the laptop and printer have both received IP addresses:
, or click Start and then click Run.
2 In the Start Search or Run box, type cmd.

3 Press Enter, or click OK.
4 Type ipconfig, and then press Enter.
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
1 From the Apple menu, navigate to:
About This Mac > More Info
2 From the Contents pane, choose Network.
3 If you are connected over a wireless network, then choose AirPort from the Active Services list.
The Router entry is typically the access point.
Locating the printer IP address
In the TCP/IP IP section, look for Address. • View the printer settings. From the printer control panel, navigate to:
> Network Setup >
> Wireless 802.11 b/ g/n n >
> Network Connection Setup >
> IP Address >
If the printer or the laptop does not have an IP address, or if either has an address of 169.254.x.y (where x and y are any two numbers between 0 and 255), then do the following:
1 Turn off the device that does not have a valid IP address (the laptop, the printer, or both).
2 Turn on the device, and then check the IP addresses again.
If the printer or the laptop still does not receive a valid IP address, then there is a problem with your wireless network. Try the following:
If the printer and computer have valid IP addresses and the network is operating correctly, then continue troubleshooting.
, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
4 Right‑click the printer, and then select Properties or Printer properties from the menu.

5 Click the Ports tab, and then locate the selected port.
The selected port has a check mark beside it in the Port column.
6 If the Description column of the selected port indicates that it is a USB port, then scroll through the list and select the port with Printer Port in the Description column. Check the printer model in the Printer column to make sure you select the right printer port.
7 Click OK, and then try to print again.
, or click Start and then click Run.
2 In the Start Search or Run box, type control printers.
3 Press Enter, or click OK.
4 Right‑click the printer, and then select Properties or Printer properties from the menu.
5 Click the Ports tab.
6 Click the box next to Enable bidirectional support if it is not already checked.
7 Click Apply > OK, and then try to print again.
You may notice that your printer works for a short time and then stops working, although apparently nothing has changed on your wireless network.
Many different issues can interrupt network communications, and sometimes more than one problem exists at the same time. Try one or more of the following:
DISCONNECT FROM ALL VPNS WHEN ATTEMPTING TO USE THE WIRELESS NETWORK
Most Virtual Private Networks (VPNs) allow computers to communicate with only the VPN and no other network at the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless setup on the computer.
To check if the computer is currently connected to a VPN, open your VPN Client software and check your VPN connections. If you do not have a VPN Client software installed, then check the connections manually using the Windows VPN Client.
If you would like to have the ability to connect to your local network and to a VPN at the same time, then request the system support person for the VPN to allow split tunneling. Be aware that some organizations will not allow split tunneling due to security or technical concerns.
TURN OFF THE ACCESS POINT (WIRELESS ROUTER) AND TURN IT BACK ON
Wait one minute for the printer and computer to reestablish the connection. This can sometimes refresh network connections and resolve connectivity issues.
Troubleshooting 169 · 1 Click

If a wireless network is too busy, then the computer and printer may have difficulty communicating with each other. Some causes of wireless network congestion can include:
Common household items can potentially disrupt wireless network communications. Cordless phones (but not cellular phones), microwave ovens, baby monitors, almost any kitchen appliance, wireless surveillance equipment, nearby wireless networks, and any appliance containing a motor can disrupt wireless network communications.
Try turning on any potential sources of interference and see if it causes the problem. If it does, then separate your wireless network from the device.
You can sometimes eliminate interference from unknown sources by changing the channel your access point uses to broadcast. There are three distinct channels on a router. See the documentation that came with your router to determine which three apply. Other channels are offered as options, but these overlap. If the router is configured to use the default settings, then change the channel setting to use a different distinct channel. If you are not sure how to change the channel, then see the documentation that came with your access point.
Many wireless networks use the SSID that the router was originally configured by the manufacturer to use. Using the default SSID can cause problems when more than one network is operating in the same area with the same SSID. The printer or computer may attempt to attach to the wrong network, although it will appear to be trying to connect to the correct network.
To avoid this type of interference, change the SSID on your access point from the default. If you are not sure how to change the SSID, then see the documentation that came with your access point.
Most wireless networks use a DHCP server (Dynamic Host Configuration Protocol) built in to the wireless router to assign IP addresses to clients on the wireless network. DHCP addresses are assigned when they are needed, as when a new device is added to the wireless network or when it is powered on. Wireless devices must send a request to the router, and receive an IP address in response so they can function on the network. Because the wireless router performs many other tasks besides assigning addresses, it sometimes does not respond quickly enough with an address. The requesting device sometimes gives up before it receives an address.
Try assigning static IP addresses to the devices in your network to resolve this issue.
Troubleshooting 170

To assign a static IP address to the printer:
1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network.
2 Print a network setup page to see what IP address is currently assigned to the printer.
3 Open a Web browser and then type the printer IP address in the address field. Press Enter.
4 Click Configuration > TCP/IP IP > Set static IP address.
5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.
Confirm that the IP address is updated by typing the static IP address in the browser address field and checking to see if the printer Web page reloads. For more information on assigning static IP addresses, see the documentation that came with your router and operating system.
Some wireless routers have documented defects that were identified and resolved by the manufacturers. Visit the company Web site of the router manufacturer. Check for firmware updates and other advice from the manufacturer. See the documentation that came with your wireless router if you are not sure how to reach the manufacturer Web site.
If you are having trouble printing from one particular computer, then check the Web site of the manufacturer of the wireless network adapter card in that computer. It is possible that there is an updated driver available that could resolve the issue.
While it is possible to successfully mix 802.11b, 802.11g, and 802.11n devices on the same wireless network, the faster devices will sometimes prevent the slower devices from communicating.
Try turning on only the network devices of the same type and see if network communications improve. If this solves the problem, then you may want to upgrade your older devices with newer wireless network adapters.
If your router is several years old, then it may not be fully compatible with the newer wireless devices on your network. Consider purchasing a newer router that is fully compliant with the 802.11 IEEE specifications.
Troubleshooting 171

Product name:
Machine type:
Model(s):
Edition notice
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc. Bldg 004-2/CS CSC 740 New Circle Road NW Lexington, KY 40550 USA
© 2011 Lexmark International, Inc.
All rights reserved.
Lexmark Pro710 Series · November 2011

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or or other countries.
Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
PCL® is a registered trademark of the Hewlett-Packard Company.
All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000
This product may contain the following modular component(s):
Lexmark regulatory type/model LEX-M03-002; FCC ID: US:2G2CN00BM03002; Industry Canada IC:2376A-M03002
Lexmark regulatory type/model LEX-M01-004; FCC ID: IYLM01004; Industry Canada IC:2376A-M01004
All licensing notices associated with this product can be viewed from the CD:\LEGAL directory of the installation software CD.
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1-meter average sound pressure, dBA
Values are subject to change. See www.lexmark.com for current values.


The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.
If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.
This product contains Perchlorate material. Special handling may apply. For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Ambient temperature 15–32° C (60–90° F)
Shipping and storage temperature -40–60° C (-40–140° F)
The following table documents the power consumption characteristics of the product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from electronic inputs. 32
Copy The product is generating hard‑copy output from hard‑copy original documents. 17
Scan The product is scanning hard‑copy documents. 11
Ready The product is waiting for a print job. 7.5
Sleep Mode The product is in a high‑level energy‑saving mode. 4.5
Off The product is plugged into a wall outlet, but the power switch is turned off. 0.4
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.
Factory default Sleep Mode Timeout for this product (in minutes): 60

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2005/32/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-using products.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.
This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.
A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is

provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
See your user documentation in order to program this information into your fax machine.
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
This equipment uses CA11A telephone jacks.
Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.
Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.
Cet équipement utilise des prises de téléphone CA11A.
The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:

This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.
This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.
Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.
Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.
Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109 o 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.
Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Refer to the table at the end of the Notices section for further compliance information.

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.
The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rp rpb.
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.
Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.
Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.
En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.
Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.
Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rp rpb.

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2005/32/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- using products.
Compliance is indicated by the CE marking.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product may be used in the countries indicated in the table below.
AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/ 5/ES. ES.
Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/ 5/EF. EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/ 5/ΕΚ. ΕΚ.
English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. EC.
Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/ 5/CE. CE.
Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.
Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.
Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/ 5/CE. CE.
Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/ 5/EC iránye EC irányelv egyéb elõírásainak.
Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/ 5/EC. EC.
Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/ 5/CE. CE.
Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/ 5/EB d EB direktyvos nuostatas.
Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/ 5/KE. KE.
Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/ 5/EG. EG.
Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/ 5/EF. EF.
Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/ 5/EC. EC.
Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/ 5/CE. CE.
Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky
príslušné ustanovenia smernice 1999/ 5/ES. ES.
Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/ 5/ES. ES.
Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/ 5/EG. EG.

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
Lexmark warrants that this product:
—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
—Is, during normal use, free from defects in material and workmanship
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.
To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.
The replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.
Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://supp support.lexmark.com.
Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.
Lexmark Pro710 Series

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
Warranty service does not include repair of failures caused by:
—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.
Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.
This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.
1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.
This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.
The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.
IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA

OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this License Agreement:
a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,
executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or
installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License Agreement. d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the
Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so shall be void. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program.

9 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this License Agreement (except to the extent such extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.
1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.com/fw link/?L ?LinkId=52369.

2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fw link/?L ?LinkId=83288.
Contains Flash®, Flash® Lite™ and/or or Reader® technology by Adobe Systems Incorporated
This Product contains Adobe® Flash® player software under license from Adobe Systems Incorporated, Copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe, Reader and Flash are trademarks of Adobe Systems Incorporated.







Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.