EN
Lexmark logo
Official user manual

Lexmark 675

329 pages·10.3 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 675
Table of Contents 558 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 1 of the Lexmark 675 user manual — May 2013 www.lexmark.com
Page 1 · click to enlarge
Page 1

MX410 and MX510 Series

User's Guide

May 2013 www.lexmark.com

Machine type(s):

Model(s):

470, 630, 670, 675

Page 2 of the Lexmark 675 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 7 of the Lexmark 675 user manual — Safety information
Page 7 · click to enlarge
Page 7

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

Refer service or repairs, other than those described in the user documentation, to a service representative.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Use only the telecommunications (RJ‑11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Safety information 7

Page 8 of the Lexmark 675 user manual — Safety information
Page 8 · click to enlarge
Page 8

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

SAVE THESE INSTRUCTIONS.

Safety information 8

Page 9 of the Lexmark 675 user manual — Learning about the printer
Page 9 · click to enlarge
Page 9

Learning about the printer 9

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides may be available on the Software and Documentation CD. For more information, visit http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then navigate to: Documentation > User’s Guide and other publications > Networking Guide Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 10 of the Lexmark 675 user manual — Selecting a location for the printer
Page 10 · click to enlarge
Page 10

Learning about the printer 10

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:
Ambient temperature15.6 to 32.2°C (60 to 90°F) Storage temperature‑40 to 60°C (-40 to 140°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 11 of the Lexmark 675 user manual — Printer configurations
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Lexmark 675 — Printer configurations diagram (page 11)
Fig. 1 · Printer configurations
1Right side30 cm (12 in.) 2Front51 cm (20 in.) 3Left side20 cm (8 in.) 4Rear20 cm (8 in.) 5Top75 cm (29 in.)

Printer configurations

You can configure your printer by adding an optional 250‑ or 550‑sheet tray. For instructions on installing the optional tray, see “Installing optional trays” on page 42.

Page 12 of the Lexmark 675 user manual — Understanding the basic functions of the scanner
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Lexmark 675 — Understanding the basic functions of the scanner diagram (page 12)
Fig. 2 · Understanding the basic functions of the scanner
Lexmark 675 — Understanding the basic functions of the scanner diagram (page 12)
Fig. 3 · Understanding the basic functions of the scanner
1Printer control panel 2Automatic document feeder (ADF) 3ADF tray 4ADF bin 5Front door release button 6Standard 250‑sheet tray 7Optional 250‑ or 550‑sheet tray 8100‑sheet multipurpose feeder 9Paper stop 10Standard bin

Understanding the basic functions of the scanner

  • Make quick copies or set the printer to perform specific copy jobs.
  • Send a fax using the printer control panel.
  • Send a fax to multiple fax destinations at the same time.
  • Scan documents and send them to your computer, an e-mail address, or an FTP destination.
  • Scan documents and send them to another printer (PDF through an FTP).
Page 13 of the Lexmark 675 user manual — Using the scanner glass
Page 13 · click to enlarge
Page 13

Learning about the printer 13

Using the ADF and scanner glass

Automatic document feeder (ADF) Scanner glass

Lexmark 675 — Using the ADF and scanner glass diagram (page 13)
Fig. 4 · Using the ADF and scanner glass
Lexmark 675 — Using the ADF and scanner glass diagram (page 13)
Fig. 5 · Using the ADF and scanner glass

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single‑page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Using the ADF

When using the ADF:

  • Load the document into the ADF tray faceup, short edge first.
  • Load up to 50 sheets of plain paper into the ADF tray.
  • Scan sizes from 105 x 148 mm (4.1 x 5.8 inches) wide to 216 x 368 mm (8.5 x 14.5 inches) long.
  • Scan media weights from 52 to 120 g/m 2 (14–32 lb).
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Using the scanner glass

When using the scanner glass:

  • Place a document facedown on the scanner glass in the corner with the green arrow.
  • Scan or copy documents up to 216 x 355.6 mm (8.5 x 14 inches) long.
  • Copy books up to 25.3 mm (1 inch) thick.
Page 14 of the Lexmark 675 user manual — Understanding the colors of the Sleep button and indicator lights
Page 14 · click to enlarge
Page 14

Understanding the printer control panel 14

Understanding the printer control panel

Using the printer control panel

2 3 4 5 6

Lexmark 675 — Understanding the printer control panel diagram (page 14)
Fig. 6 · Understanding the printer control panel
Lexmark 675 — Understanding the printer control panel diagram (page 14)
Fig. 7 · Understanding the printer control panel
  • 1 Display
  • View the printer status and messages.
  • Set up and operate the printer.

4 Clear all / Reset button Reset the default settings of a function, such as copying, faxing, or scanning.

6 Sleep button Enable Sleep mode or Hibernate mode. Do one of the following to wake the printer from Sleep mode:

  • Press any hard button.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.

7 Stop or Cancel button Stop all printer activity.

8 Submit button Submit changes made in the printer settings.

9 Indicator light Check the status of the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Lexmark 675 — Understanding the colors of the Sleep button and indicator lights diagram (page 14)
Fig. 8 · Understanding the colors of the Sleep button and ind…

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Page 15 of the Lexmark 675 user manual — Understanding the home screen
Page 15 · click to enlarge
Page 15

Understanding the printer control panel 15

Indicator light Printer status

Blinking red The printer requires user intervention.

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or respond to messages.

1 2 3 4

Lexmark 675 — Understanding the home screen diagram (page 15)
Fig. 9 · Understanding the home screen

1 Copy Access the Copy menus and make copies.

2 Fax Access the Fax menus and send fax.

3 E‑mail Access the E-mail menus and send e‑mails.

4 FTP Access the File Transfer Protocol (FTP) menus and scan documents directly to an FTP server.

5 Menu icon Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer supply conditions such as Imaging unit low or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.

Touch To

Page 16 of the Lexmark 675 user manual — Using the touch-screen buttons
Page 16 · click to enlarge
Page 16

Understanding the printer control panel 16

  • 7 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

This may also appear on the home screen:

Search Held Jobs Search current held jobs.

Jobs by user Access print jobs saved by user.

Profiles and Apps Access profiles and applications.

Features

Attendance message alert If an attendance message affects a function, then this icon appears and the red indicator light blinks.

The IP address of your printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server to view and remotely configure printer settings even when you are not physically near the printer.

Example123.123.123.123

Using the touch-screen buttons

Show 4 more labels / short text on this page
Touch To · Touch To · Feature Description · Printer IP address
Page 17 of the Lexmark 675 user manual — Using the touch-screen buttons
Page 17 · click to enlarge
Page 17

Understanding the printer control panel 17

Lexmark 675 — Using the touch-screen buttons diagram (page 17)
Fig. 10 · Using the touch-screen buttons

1 Radio button Select or clear an item.

2 Up arrow Scroll up.

3 Down arrow Scroll down.

4 Accept button Save a setting.

  • 5 Cancel button
  • Cancel an action or a selection.
  • Return to the previous screen.

Return to the home screen.

Open a context-sensitive Help dialog on the printer control panel.

Scroll to the left.

Scroll to the right.

Touch the To · Touch To

Page 18 of the Lexmark 675 user manual — For Macintosh users
Page 18 · click to enlarge
Page 18

Setting up and using the home screen applications 18

Setting up and using the home screen applications

  • Your home screen, icons, and buttons may vary depending on your home screen customization settings, administrative setup, and active embedded applications.
  • There may be additional solutions and applications available for purchase. To learn more, visit <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> or contact the place where you purchased the printer.

Finding the IP address of the computer

The computer IP address is required when setting up home screen applications, such as:

  • Forms and Favorites
  • Multi Send
  • Scan to Network

For Windows users

1 Open the command window.

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type cmd > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type cmd.

c Press Enter, or click OK.

2 Type ipconfig, and then click Go or press Enter.

3 Look for IP Address.

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

For Macintosh users

1 From the Apple menu, navigate to:

System Preferences > Network

2 Click Ethernet, Wi‑Fi, or AirPort.

a Click

Page 19 of the Lexmark 675 user manual — Customizing the home screen
Page 19 · click to enlarge
Page 19

Setting up and using the home screen applications 19

3 Click Advanced > TCP/IP.

4 Look for IPv4 Address.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide the icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the home screen.

Page 20 of the Lexmark 675 user manual — Setting up Forms and Favorites
Page 20 · click to enlarge
Page 20

Setting up and using the home screen applications 20

Understanding the different applications

Card Copy Scan and print both sides of a card on a single page. For more information, see “Setting up Card Copy” on page 21.

Fax Scan a document, and then send it to a fax number. For more information, see “Faxing” on page 103.

Forms and Favorites Quickly find and print frequently used online forms directly from the printer home screen. For more

information, see “Setting up Forms and Favorites” on page 20.

Multi Send Scan a document, and then send it to multiple destinations. For more information, see “Setting up Multi Send” on page 22.

MyShortcut Create shortcuts directly on the printer home screen. For more information, see “Using MyShortcut” on page 22.

Scan to E‑mail Scan a document, and then send it to an e‑mail address. For more information, see “E-mailing” on page 96.

Scan to Computer Scan a document, and then save it to a predefined folder on a host computer. For more information, see “Setting up Scan to Computer” on page 130.

Scan to FTP Scan documents directly to a File Transfer Protocol (FTP) server. For more information, see “Scanning to an FTP address” on page 128.

Scan to Network Scan a document, and then send it to a network shared folder. For more information, see “Setting up Scan to Network” on page 23.

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 19.

For more information on configuring and using the home screen applications, do the following:

1 Go to http://support.lexmark.com.

  • 2 Click Software Solutions , and then select either of the following:
  • Scan to Network —This lets you find information about the Scan to Network application.
  • Other Applications —This lets you find information about the other applications.

3 Click the Manuals tab, and then select the document for the home screen application.

Setting up Forms and Favorites

Use To

Page 21 of the Lexmark 675 user manual — Setting up Card Copy
Page 21 · click to enlarge
Page 21

Setting up and using the home screen applications 21

Lexmark 675 — Setting up Card Copy diagram (page 21)
Fig. 11 · Setting up Card Copy

Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 18.
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Setting up Card Copy

Lexmark 675 — Setting up Card Copy diagram (page 21)
Fig. 12 · Setting up Card Copy

Quickly and easily copy insurance, identification, and other wallet‑size cards.

You can scan and print both sides of a card on a single page, saving paper and showing the information on the card in a more convenient manner.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Card Copy.

Use To · Use To

Page 22 of the Lexmark 675 user manual — Setting up Multi Send
Page 22 · click to enlarge
Page 22

Setting up and using the home screen applications 22

  • 3 Change the default scanning options, if necessary.
  • Default tray —Select the default tray to be used for printing scan images.
  • Default number of copies —Specify the number of copies that should automatically print when the application is used.
  • Default contrast setting —Specify a setting to increase or decrease the level of contrast when a copy of the scanned card is printed. Select Best for Content if you want the printer to adjust the contrast automatically.
  • Default scale setting —Set the size of the scanned card when printed. The default setting is 100% (full size).
  • Resolution setting —Adjust the quality of the scanned card.

– When scanning a card, make sure the scan resolution is not more than 200 dpi for color, and 400 dpi for

black and white. – When scanning multiple cards, make sure the scan resolution is not more than 150 dpi for color, and

300 dpi for black and white. • Print Borders—Select the check box to print the scan image with a border around it.

4 Click Apply.

To use the application, touch Card Copy on the printer home screen, and then follow the instructions.

Using MyShortcut

Lexmark 675 — Using MyShortcut diagram (page 22)
Fig. 13 · Using MyShortcut

Create shortcuts on the printer home screen, with settings for up to 25 frequently used copy, fax, or e- mail jobs.

To use the application, touch MyShortcut, and then follow the instructions on the printer display.

Setting up Multi Send

Lexmark 675 — Setting up Multi Send diagram (page 22)
Fig. 14 · Setting up Multi Send

Scan a document, and then send the scanned document to multiple destinations.

Use To · Use To

Page 23 of the Lexmark 675 user manual — Setting up Scan to Network
Page 23 · click to enlarge
Page 23

Setting up and using the home screen applications 23

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Multi Send.

3 From the Profiles section, click Add, and then customize the settings.

  • See the mouse ‑ over help beside each field for a description of the setting.
  • If you select FTP or Share Folder as a destination, then make sure the location settings of the destination are correct. Type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 18.

4 Click Apply.

To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printer display.

Setting up Scan to Network

Lexmark 675 — Setting up Scan to Network diagram (page 23)
Fig. 15 · Setting up Scan to Network

Scan a document and send it to a shared network folder. You can define up to 30 unique folder destinations.

  • The printer must have permission to write to the destinations. From the computer where the destination is specified, use sharing, security, and firewall settings to allow the printer at least a write access. For help, see the documentation that came with your operating system.
  • The Scan to Network icon appears only when one or more destinations are defined.

1 Open a Web browser, and then type the printer IP address in the address field.

  • 2 Do either of the following:
  • Click Set up Scan to Network > Click here .
  • Click Settings > Apps > Apps Management > Scan to Network .

3 Specify the destinations, and then customize the settings.

  • See the mouse-over help beside some of the fields for a description of the setting.
  • To make sure the location settings of the destination are correct, type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 18.

Use To

Page 24 of the Lexmark 675 user manual — Exporting and importing a configuration
Page 24 · click to enlarge
Page 24

Setting up and using the home screen applications 24

  • Make sure the printer has access rights to the folder where the specified destination is located.

4 Click Apply.

To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the printer display.

Setting up Remote Operator Panel

This application enables you to interact with the printer control panel even when you are not physically near the network printer. From your computer, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

3 Select the Enable check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration file is

saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.

Page 25 of the Lexmark 675 user manual — Setting up Remote Operator Panel
Page 25 · click to enlarge
Page 25

Setting up and using the home screen applications 25

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .
Page 26 of the Lexmark 675 user manual — Available internal options
Page 26 · click to enlarge
Page 26

Additional printer setup 26

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

  • Memory card – DDR3 DIMM – Flash memory
  • Fonts
  • Firmware cards – Forms Barcode – Prescribe – IPDS – Printcryption
  • Printer hard disk 1
  • Lexmark TM Internal Solutions Ports (ISP) – Parallel 1284 ‑ B interface – MarkNet TM N8350 802.11 b/g/n wireless printer server 1

– MarkNet N8352 802.11 b/g/n wireless printer server2

– MarkNet N8130 10/100 fiber interface – RS‑232‑C serial interface

1 This internal option is available only in MX510de, MX511de, and MX511dhe printer models.

2 This internal option is available only in MX410de printer model.

Page 27 of the Lexmark 675 user manual — Accessing the controller board
Page 27 · click to enlarge
Page 27

Additional printer setup 27

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Open the controller board access door.

Lexmark 675 — Accessing the controller board diagram (page 27)
Fig. 16 · Accessing the controller board

2 Open the controller board shield using the green handle.

Lexmark 675 — Accessing the controller board diagram (page 27)
Fig. 17 · Accessing the controller board
Lexmark 675 — Accessing the controller board diagram (page 27)
Fig. 18 · Accessing the controller board

3 Use the following illustration to locate the appropriate connector.

Page 28 of the Lexmark 675 user manual — Installing a memory card
Page 28 · click to enlarge
Page 28

Additional printer setup 28

Lexmark 675 — Installing a memory card diagram (page 28)
Fig. 19 · Installing a memory card

2 1 3 4

1 Memory card connector

2 Option card connector

3 Printer hard disk connector

4 Lexmark Internal Solutions Port connector

4 Close the shield, and then the access door.

Lexmark 675 — Installing a memory card diagram (page 28)
Fig. 20 · Installing a memory card
Lexmark 675 — Installing a memory card diagram (page 28)
Fig. 21 · Installing a memory card

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 27.

2 Unpack the memory card.

Page 29 of the Lexmark 675 user manual — Installing a memory card
Page 29 · click to enlarge
Page 29

Additional printer setup 29

3 Align the notch (1) on the memory card with the ridge (2) on the connector.

Lexmark 675 — Installing a memory card diagram (page 29)
Fig. 22 · Installing a memory card

4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

Lexmark 675 — Installing a memory card diagram (page 29)
Fig. 23 · Installing a memory card

5 Close the controller board shield, and then the controller board access door.

Page 30 of the Lexmark 675 user manual — Installing an optional card
Page 30 · click to enlarge
Page 30

Additional printer setup 30

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 27.

2 Unpack the optional card.

3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Lexmark 675 — Installing an optional card diagram (page 30)
Fig. 24 · Installing an optional card
Lexmark 675 — Installing an optional card diagram (page 30)
Fig. 25 · Installing an optional card
Page 31 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 31 · click to enlarge
Page 31

Additional printer setup 31

4 Push the card firmly into place as shown in the illustration.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 31)
Fig. 26 · Installing an Internal Solutions Port

5 Close the controller board shield, and then the controller board access door.

Installing an Internal Solutions Port

The controller board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 32 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 32 · click to enlarge
Page 32

Additional printer setup 32

1 Open the controller board access door.

2 Lightly press the stop on the left side of the access door, and then slide the access door to remove it.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 32)
Fig. 27 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 32)
Fig. 28 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 32)
Fig. 29 · Installing an Internal Solutions Port

3 Unpack the ISP kit.

Page 33 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 33 · click to enlarge
Page 33

Additional printer setup 33

Lexmark 675 — Installing an Internal Solutions Port diagram (page 33)
Fig. 30 · Installing an Internal Solutions Port

2 Screw to attach the ISP to the bracket

4 Screws to attach the ISP metal bracket to the printer cage

4 Place the plastic bracket inside the ISP exterior cover until it clicks into place.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 33)
Fig. 31 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 33)
Fig. 32 · Installing an Internal Solutions Port

5 Slide and push the ISP solution into the plastic bracket.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 33)
Fig. 33 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 33)
Fig. 34 · Installing an Internal Solutions Port
Page 34 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 34 · click to enlarge
Page 34

Additional printer setup 34

6 Secure the ISP solution to the plastic bracket using the long screw.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 34)
Fig. 35 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 34)
Fig. 36 · Installing an Internal Solutions Port

7 Tighten the two screws on the end of the ISP solution.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 34)
Fig. 37 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 34)
Fig. 38 · Installing an Internal Solutions Port
Page 35 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 35 · click to enlarge
Page 35

Additional printer setup 35

8 Attach the white plug of the ISP solution interface cable into the white receptacle on the ISP.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 35)
Fig. 39 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 35)
Fig. 40 · Installing an Internal Solutions Port

9 Attach the ISP exterior cover at an angle by inserting the left hinges first.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 35)
Fig. 41 · Installing an Internal Solutions Port
Page 36 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 36 · click to enlarge
Page 36

Additional printer setup 36

10 Lower the rest of the cover, and then slide the cover to the right.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 36)
Fig. 42 · Installing an Internal Solutions Port

11 Run the ISP cable through the controller board shield.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 36)
Fig. 43 · Installing an Internal Solutions Port
Page 37 of the Lexmark 675 user manual — Installing an Internal Solutions Port
Page 37 · click to enlarge
Page 37

Additional printer setup 37

12 Open the shield using the green handle.

13 Attach the blue plug of the ISP solution interface cable into the blue receptacle on the controller board.

Lexmark 675 — Installing an Internal Solutions Port diagram (page 37)
Fig. 44 · Installing an Internal Solutions Port
Lexmark 675 — Installing an Internal Solutions Port diagram (page 37)
Fig. 45 · Installing an Internal Solutions Port
Page 38 of the Lexmark 675 user manual — Installing a printer hard disk
Page 38 · click to enlarge
Page 38

Additional printer setup 38

14 Close the shield.

15 Close the ISP exterior cover.

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 27.

2 Unpack the printer hard disk.

3 Install the printer hard disk on the controller board.

Page 39 of the Lexmark 675 user manual — Installing a printer hard disk
Page 39 · click to enlarge
Page 39

Additional printer setup 39

a Using a flat‑head screwdriver, loosen the screws.

Lexmark 675 — Installing a printer hard disk diagram (page 39)
Fig. 46 · Installing a printer hard disk
Lexmark 675 — Installing a printer hard disk diagram (page 39)
Fig. 47 · Installing a printer hard disk

b Insert the plug of the printer hard disk interface cable into the receptacle of the controller board.

Lexmark 675 — Installing a printer hard disk diagram (page 39)
Fig. 48 · Installing a printer hard disk
Page 40 of the Lexmark 675 user manual — Installing a printer hard disk
Page 40 · click to enlarge
Page 40

Additional printer setup 40

c Align the screws on the printer hard disk to the slots on the controller board bracket, and then slide the printer hard disk onto the brackets.

Lexmark 675 — Installing a printer hard disk diagram (page 40)
Fig. 49 · Installing a printer hard disk

d Tighten the two screws.

Lexmark 675 — Installing a printer hard disk diagram (page 40)
Fig. 50 · Installing a printer hard disk
Lexmark 675 — Installing a printer hard disk diagram (page 40)
Fig. 51 · Installing a printer hard disk

4 Close the controller board shield, and then close the controller board access door.

Page 41 of the Lexmark 675 user manual — Removing a printer hard disk
Page 41 · click to enlarge
Page 41

Additional printer setup 41

Removing a printer hard disk

1 Access the controller board.

For more information, see “Accessing the controller board” on page 27.

2 Loosen the screws that connect the printer hard disk to the controller board bracket.

Lexmark 675 — Removing a printer hard disk diagram (page 41)
Fig. 52 · Removing a printer hard disk

3 Unplug the printer hard disk interface cable from the receptacle in the controller board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

4 Hold the printer hard disk by the edges, and then remove it from the printer.

5 Close the controller board shield, and then close the access door.

Page 42 of the Lexmark 675 user manual — Installing optional trays
Page 42 · click to enlarge
Page 42

Additional printer setup 42

Installing hardware options

Order of installation

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Install the printer and any hardware options you have purchased in the following order:

  • Printer stand
  • Optional 250 ‑ or 550 ‑ sheet tray
  • Printer

For more information on installing a printer stand, optional 250‑ or 550‑sheet tray, or spacer, see the setup sheet that came with the option.

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Page 43 of the Lexmark 675 user manual — Installing hardware options
Page 43 · click to enlarge
Page 43

Additional printer setup 43

Lexmark 675 — Installing hardware options diagram (page 43)
Fig. 53 · Installing hardware options
Lexmark 675 — Installing hardware options diagram (page 43)
Fig. 54 · Installing hardware options
Lexmark 675 — Installing hardware options diagram (page 43)
Fig. 55 · Installing hardware options

2 Unpack the tray, and then remove all packing material.

3 Pull out the tray from the base.

Lexmark 675 — Installing hardware options diagram (page 43)
Fig. 56 · Installing hardware options

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

7 Align the printer with the tray, and then slowly lower the printer into place.

Page 44 of the Lexmark 675 user manual — Installing hardware options
Page 44 · click to enlarge
Page 44

Additional printer setup 44

Lexmark 675 — Installing hardware options diagram (page 44)
Fig. 57 · Installing hardware options

8 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Lexmark 675 — Installing hardware options diagram (page 44)
Fig. 58 · Installing hardware options
Lexmark 675 — Installing hardware options diagram (page 44)
Fig. 59 · Installing hardware options
Lexmark 675 — Installing hardware options diagram (page 44)
Fig. 60 · Installing hardware options
  • When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 47.
  • To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.
Page 45 of the Lexmark 675 user manual — Attaching cables
Page 45 · click to enlarge
Page 45

Additional printer setup 45

Attaching cables

Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port
Lexmark 675 — Attaching cables diagram (page 45)
Fig. 61 · Attaching cables

1 Printer power cord socket

Connect the printer to a properly grounded electrical outlet.

2 Power switch Turn the printer on or off.

3 Ethernet port Connect the printer to an Ethernet network.

4 EXT port Connect additional devices (telephone or answering machine) to the printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer and if this connection method is supported in your country or region.

5 LINE port Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to access the telephone line to send and receive faxes.

6 USB port Attach a supported printer keyboard.

7 USB printer port Connect the printer to a computer.

Use the To

Page 46 of the Lexmark 675 user manual — In Macintosh
Page 46 · click to enlarge
Page 46

Additional printer setup 46

8 Security slot Attach a lock that will secure the printer in place.

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.
  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

2 Do either of the following: • If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear. If the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop. • If you are using the downloaded software installer from the Web, then double‑click the installer that you have saved in your computer. Wait for the Select Installation Type dialog to appear, and then click Install.

3 Click Install, and then follow the instructions on the computer screen.

Use the To · a Click

Page 47 of the Lexmark 675 user manual — For Macintosh users
Page 47 · click to enlarge
Page 47

Additional printer setup 47

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

In Windows 8 · a Click

Page 48 of the Lexmark 675 user manual — For Windows users
Page 48 · click to enlarge
Page 48

Additional printer setup 48

Networking

  • Purchase a MarkNet N8350 wireless network adapter for MX510de, MX511de, and MX511dhe printer models or MarkNet N8352 wireless network adapter for MX410de printer model first before setting up the printer on a wireless network. For more information on installing the wireless network adapter, see the setup sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), and WPA2 are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

2 Do either of the following: • If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear. If the installation dialog does not appear, then do the following:

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 8

Page 49 of the Lexmark 675 user manual — For Macintosh users
Page 49 · click to enlarge
Page 49

Additional printer setup 49

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Insert the Software and Documentation CD, and then double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when installation is complete.

4 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner.

a Click

Page 50 of the Lexmark 675 user manual — Preparing to set up the printer on a wireless network
Page 50 · click to enlarge
Page 50

Additional printer setup 50

d Click the IP tab. e Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • Make sure your access point (wireless router) is turned on and is working properly.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

Page 51 of the Lexmark 675 user manual — Connecting the printer using the Wireless Setup Wizard
Page 51 · click to enlarge
Page 51

Additional printer setup 51

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Connecting the printer using the Wireless Setup Wizard

Before you begin, make sure that:

  • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • An Ethernet cable is disconnected from the printer.
  • Active NIC is set to Auto. To set this to Auto, navigate to:

> Network/Ports > Active NIC > Auto >

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

2 Select a wireless connection setup.

Search for networks Show available wireless connections.

Enter a network name Manually type the SSID.

Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.

3 Follow the instructions on the printer display.

Connecting the printer to a wireless network using Wi‑Fi Protected Setup

Before you begin, make sure that:

  • The access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter installed in your printer is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

Use To

Page 52 of the Lexmark 675 user manual — Connecting the printer to a wireless network using the Embedded Web Server
Page 52 · click to enlarge
Page 52

Additional printer setup 52

Using the Push Button Configuration method

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start Push Button Method

2 Follow the instructions on the printer display.

Using the Personal Identification Number (PIN) method

1 From the printer control panel, navigate to:

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup > Wi‑Fi Protected Setup > Start PIN Method

2 Copy the eight‑digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

  • Your printer is connected temporarily to an Ethernet network.
  • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.

Page 53 of the Lexmark 675 user manual — For Windows users
Page 53 · click to enlarge
Page 53

Additional printer setup 53

Changing port settings after installing a new network Internal Solutions Port

When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.

  • If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
  • If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes to your computer configurations.
  • If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network when you configure the printer to operate wirelessly. If the printer is connected to the Ethernet network, then the wireless configuration completes, but the wireless ISP is inactive. To activate the wireless ISP, disconnect the printer from the Ethernet network, turn off the printer, and then turn it back on.
  • Only one network connection is active at a time. To switch between Ethernet and wireless connection types, turn off the printer, connect the cable (to switch to an Ethernet connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on.

For Windows users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open the printers folder.

From the Search charm, type Run and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 3 To select the printer that has changed, do either of the following:
  • Press and hold the printer, and then select Printer properties .
  • Right ‑ click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).

4 Click the Ports tab.

5 Select the port from the list, and then click Configure Port.

In Windows 8 · a Click

Page 54 of the Lexmark 675 user manual — Setting up serial printing
Page 54 · click to enlarge
Page 54

Additional printer setup 54

6 Type the new IP address in the “Printer Name or IP Address” field.

7 Click OK > Close.

For Macintosh users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select the printer > Add

Setting up serial printing

Use serial printing to print when the computer is far from the printer or to print at a reduced speed.

After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer.

1 Set the parameters in the printer. a From the printer control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Save the modified settings, and then print a menu settings page.

Page 55 of the Lexmark 675 user manual — In Windows 8
Page 55 · click to enlarge
Page 55

Additional printer setup 55

2 Install the printer driver. a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer
  • From our Web site: Go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package b Do either of the following:
  • If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear. If the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

, or click Start and then click Run. 2 In the Start Search or Run dialog, type D:\setup.exe. 3 Press Enter or click OK.

f From the Configure Printer Connection dialog, select a port. g If the port is not in the list, then click Refresh, or navigate to:

Add port > select a port type > enter the necessary information > OK h Click Continue > Finish.

3 Set the COM port parameters.

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.

In Windows 8

From the Search charm, type run and then navigate to: Apps list > Run > type devmgmt.msc > OK

1 Click

Page 56 of the Lexmark 675 user manual — Printing a network setup page
Page 56 · click to enlarge
Page 56

Additional printer setup 56

In Windows 7 or earlier

, or click Start and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports.

c Do either of the following:

  • Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
  • Right ‑ click the COM port where you attached the serial cable to your computer (example: COM1). d From the menu that appears, select Properties . e On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.

Check the serial heading of the menu settings page for the printer settings. f Click OK, and then close all the dialogs. g Print a test page to verify printer installation.

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.
  • Network setup page —If your printer has networking support, then use this page to verify that the network connection is working. This page also provides important information that aids network printing configuration.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page, and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

1 Click

Page 57 of the Lexmark 675 user manual — Loading trays
Page 57 · click to enlarge
Page 57

Loading paper and specialty media 57

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 226 and “Storing paper” on page 74.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 76.2 x 76.2 mm (3 x 3 inches).
  • The largest supported Universal size is 215.9 x 359.92 mm (8.5 x 14.17 inches).

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select the unit of measure >

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch

Loading trays

1 Pull out the tray completely.

Page 58 of the Lexmark 675 user manual — LTR LGL
Page 58 · click to enlarge
Page 58

Loading paper and specialty media 58

Lexmark 675 — Loading paper and specialty media diagram (page 58)
Fig. 62 · Loading paper and specialty media

2 Squeeze and then slide the width guide tab to the correct position for the size of the paper you are loading.

Lexmark 675 — Loading paper and specialty media diagram (page 58)
Fig. 63 · Loading paper and specialty media

LTR LGL

A4 B5 A5

EXEC

Lexmark 675 — LTR LGL diagram (page 58)
Fig. 64
Page 59 of the Lexmark 675 user manual — Loading paper and specialty media
Page 59 · click to enlarge
Page 59

Loading paper and specialty media 59

3 Squeeze and then slide the length guide tab to the correct position for the size of the paper you are loading.

Lexmark 675 — Loading paper and specialty media diagram (page 59)
Fig. 65 · Loading paper and specialty media
Lexmark 675 — Loading paper and specialty media diagram (page 59)
Fig. 66 · Loading paper and specialty media
  • For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward to accommodate their length.
  • When loading legal ‑ size paper, the length guide extends beyond the base leaving the paper exposed to dust. To protect the paper from dust, you can purchase a dust cover separately. For more information, contact customer support.
  • If you are loading A6-size paper in the standard tray, then squeeze and then slide the length guide tab toward the center of the tray to the A6 ‑ size position.
  • Make sure the width and length guides are aligned with the paper size indicators on the bottom of the tray.
Page 60 of the Lexmark 675 user manual — Loading paper and specialty media
Page 60 · click to enlarge
Page 60

Loading paper and specialty media 60

Lexmark 675 — Loading paper and specialty media diagram (page 60)
Fig. 67 · Loading paper and specialty media
Lexmark 675 — Loading paper and specialty media diagram (page 60)
Fig. 68 · Loading paper and specialty media

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 675 — Loading paper and specialty media diagram (page 60)
Fig. 69 · Loading paper and specialty media

5 Load the paper stack.

Lexmark 675 — Loading paper and specialty media diagram (page 60)
Fig. 70 · Loading paper and specialty media
Lexmark 675 — Loading paper and specialty media diagram (page 60)
Fig. 71 · Loading paper and specialty media
Page 61 of the Lexmark 675 user manual — Loading paper and specialty media
Page 61 · click to enlarge
Page 61

Loading paper and specialty media 61

  • Load with the printable side facedown when using recycled or preprinted paper.
  • Load prepunched paper with the holes on the top edge toward the front of the tray.
  • Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two ‑ sided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray.
  • Make sure the paper is below the maximum paper fill indicator located on the side of the width guide.
Lexmark 675 — Loading paper and specialty media diagram (page 61)
Fig. 72 · Loading paper and specialty media
Lexmark 675 — Loading paper and specialty media diagram (page 61)
Fig. 73 · Loading paper and specialty media

6 Insert the tray.

Lexmark 675 — Loading paper and specialty media diagram (page 61)
Fig. 74 · Loading paper and specialty media

7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 62 of the Lexmark 675 user manual — Loading the multipurpose feeder
Page 62 · click to enlarge
Page 62

Loading paper and specialty media 62

Loading the multipurpose feeder

Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock, transparencies, paper labels, and envelopes. You can also use it for single‑page print jobs on letterhead.

1 Open the multipurpose feeder.

Lexmark 675 — Loading the multipurpose feeder diagram (page 62)
Fig. 75 · Loading the multipurpose feeder
Lexmark 675 — Loading the multipurpose feeder diagram (page 62)
Fig. 76 · Loading the multipurpose feeder

a Pull the multipurpose feeder extender.

Lexmark 675 — Loading the multipurpose feeder diagram (page 62)
Fig. 77 · Loading the multipurpose feeder
Page 63 of the Lexmark 675 user manual — Loading the multipurpose feeder
Page 63 · click to enlarge
Page 63

Loading paper and specialty media 63

b Pull the extender gently so that the multipurpose feeder is fully extended and open.

Lexmark 675 — Loading the multipurpose feeder diagram (page 63)
Fig. 78 · Loading the multipurpose feeder

2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.

Lexmark 675 — Loading the multipurpose feeder diagram (page 63)
Fig. 79 · Loading the multipurpose feeder

3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 675 — Loading the multipurpose feeder diagram (page 63)
Fig. 80 · Loading the multipurpose feeder
  • Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
Page 64 of the Lexmark 675 user manual — Loading the multipurpose feeder
Page 64 · click to enlarge
Page 64

Loading paper and specialty media 64

  • Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

4 Load the paper or specialty media.

  • Do not force paper or specialty media into the multipurpose feeder.
  • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams.
Lexmark 675 — Loading the multipurpose feeder diagram (page 64)
Fig. 81 · Loading the multipurpose feeder
  • Load paper, transparencies, and card stock with the recommended printable side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging that the transparencies came in.
Page 65 of the Lexmark 675 user manual — Loading the multipurpose feeder
Page 65 · click to enlarge
Page 65

Loading paper and specialty media 65

Lexmark 675 — Loading the multipurpose feeder diagram (page 65)
Fig. 82 · Loading the multipurpose feeder
Lexmark 675 — Loading the multipurpose feeder diagram (page 65)
Fig. 83 · Loading the multipurpose feeder
Lexmark 675 — Loading the multipurpose feeder diagram (page 65)
Fig. 84 · Loading the multipurpose feeder
Lexmark 675 — Loading the multipurpose feeder diagram (page 65)
Fig. 85 · Loading the multipurpose feeder
  • Load letterhead faceup with the top edge entering the printer first. For two ‑ sided (duplex) printing, load letterhead facedown with the bottom edge entering the printer first.
Lexmark 675 — Loading the multipurpose feeder diagram (page 65)
Fig. 86 · Loading the multipurpose feeder
Page 66 of the Lexmark 675 user manual — Linking and unlinking trays
Page 66 · click to enlarge
Page 66

Loading paper and specialty media 66

  • Load envelopes with the flap on the left side facedown.
Lexmark 675 — Linking and unlinking trays diagram (page 66)
Fig. 87 · Linking and unlinking trays

5 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder.

Linking and unlinking trays

When one linked tray becomes empty, paper feeds from the next linked tray. We recommend giving all custom paper, such as letterhead and different colored plain papers, a different custom type name so that the trays they are in do not automatically link.

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Page 67 of the Lexmark 675 user manual — Using the Embedded Web Server
Page 67 · click to enlarge
Page 67

Loading paper and specialty media 67

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

4 Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type

4 Click Submit.

3 Touch

Page 68 of the Lexmark 675 user manual — Using the printer control panel
Page 68 · click to enlarge
Page 68

Loading paper and specialty media 68

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type

Configuring a custom name

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom name you want to configure, then select a paper or specialty media type, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom name you want to configure, and then touch

3 Touch

Page 69 of the Lexmark 675 user manual — Tips on using envelopes
Page 69 · click to enlarge
Page 69

Paper and specialty media guide 69

Paper and specialty media guide

Using specialty media

Tips on using letterhead

  • Use letterhead designed specifically for laser printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex, fan, and straighten the stack to prevent sheets from sticking together.
  • Page orientation is important when printing on letterhead. For information on how to load letterhead, see: – “Loading trays” on page 57 – “Loading the multipurpose feeder” on page 62

Tips on using transparencies

  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Feed transparencies from the standard tray, or the multipurpose feeder.
  • Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures up to 185°C (365°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • Note: If the transparency weight is set to Heavy and the transparency texture is set to Rough in the Paper menu, then transparencies can be printed at a temperature up to 195°C (383°F).
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex, fan, and straighten the stack to prevent sheets from sticking together.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 230°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb bond) paper or 25% cotton. All ‑ cotton envelopes must not exceed 75 ‑ g/m 2 (20 ‑ lb bond) weight.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached
Page 70 of the Lexmark 675 user manual — Tips on using card stock
Page 70 · click to enlarge
Page 70

Paper and specialty media guide 70

– Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For more information on label printing, characteristics, and design, see the Card Stock & Label Guide available at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 240°C (464°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 172‑kPa (25‑psi) pressure without

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 inch) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Make sure the adhesive backing does not reach to the edge of the sheet. Zone coating of the adhesive should be at least 1 mm (0.04 inch) away from edges. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, then remove a 2 ‑ mm (0.08 ‑ inch) strip on the leading and driver edge, and then use a non ‑ oozing adhesive.
  • Portrait orientation is recommended, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • Make sure the Paper Type is Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure that the card stock can withstand temperatures up to 240°C (464°F) without releasing hazardous emissions.
Page 71 of the Lexmark 675 user manual — Grain direction
Page 71 · click to enlarge
Page 71

Paper and specialty media guide 71

  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer trays can automatically feed paper weights up to 120‑g/m2 (32‑lb) bond grain long paper. The multipurpose feeder can automatically feed paper weights up to 163‑g/m2 (43‑lb) bond grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75‑g/m2 (20‑lb) bond grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches), we recommended to use 90 g/m2

(24 lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, then toner cannot fuse to it properly. If paper is too smooth, then it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time to several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

Page 72 of the Lexmark 675 user manual — Using recycled paper and other office papers
Page 72 · click to enlarge
Page 72

Paper and specialty media guide 72

For 60–90‑g/m2 (16–24‑lb) bond paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 90 g/m 2 (16 to 24 lb) weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
Page 73 of the Lexmark 675 user manual — Unacceptable paper examples
Page 73 · click to enlarge
Page 73

Paper and specialty media guide 73

  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or the Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents
Page 74 of the Lexmark 675 user manual — Supported paper sizes
Page 74 · click to enlarge
Page 74

Paper and specialty media guide 74

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.

Supported paper sizes, types, and weights

Supported paper sizes

Lexmark 675 — Supported paper sizes diagram (page 74)
Fig. 88 · Supported paper sizes

250‑sheet tray Optional 250‑ or 550‑sheet tray Multipurpose feeder

A6 105 x 148 mm (4.13 x 5.83 in.)

* Universal is supported in duplex mode only if the width is at least 210 mm (8.27 in.) and the length is at least 279.4 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Page 75 of the Lexmark 675 user manual — Storing paper
Page 75 · click to enlarge
Page 75

Paper and specialty media guide 75

Lexmark 675 — Storing paper diagram (page 75)
Fig. 89 · Storing paper

250‑sheet tray Optional 250‑ or 550‑sheet tray Multipurpose feeder

Executive 184.2 x 266.7 mm (7.25 x 10.5 in.)

76.2 x 127 mm (3 x 5 in.) to 215.9 x 359.92 mm (8.5 x 14.17 in.)

7 3/4 Envelope (Monarch) 98.4 x 190.5 mm (3.875 x 7.5 in.)

* Universal is supported in duplex mode only if the width is at least 210 mm (8.27 in.) and the length is at least 279.4 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Page 76 of the Lexmark 675 user manual — Supported paper types and weights
Page 76 · click to enlarge
Page 76

Paper and specialty media guide 76

Lexmark 675 — Supported paper types and weights diagram (page 76)
Fig. 90 · Supported paper types and weights

250‑sheet tray Optional 250‑ or 550‑sheet tray Multipurpose feeder

85.7 x 165 mm to 215.9 x 355.6 mm (3.375 x 6.50 in. to 8.5 x 14 in.)

* Universal is supported in duplex mode only if the width is at least 210 mm (8.27 in.) and the length is at least 279.4 mm (11 in.). The smallest supported Universal size is supported only in the multipurpose feeder.

Supported paper types and weights

The standard tray supports 60–90‑g/m2 (16–24‑lb) paper weights. The optional tray supports 60–120‑g/m2 (16–32‑lb) paper weights. The multipurpose feeder supports 60–163‑g/m2 (16–43‑lb) paper weights.

Lexmark 675 — Supported paper types and weights diagram (page 76)
Fig. 91 · Supported paper types and weights

Paper type 250‑ or 550‑sheet tray Multipurpose feeder Duplex mode ADF Scanner glass

1 One‑sided paper labels designed for laser printers are supported for occasional use. We recommend printing only up to 20 pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.

2 Use envelopes that lie flat when individually placed on a table facedown.

Page 77 of the Lexmark 675 user manual — For Macintosh users
Page 77 · click to enlarge
Page 77

Printing

Printing forms and a document

Printing forms

Use the Forms and Favorites application to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites” on page 20.

1 From the printer home screen, navigate to:

Forms and Favorites > select the form from the list > enter the number of copies > adjust other settings

2 Depending on your printer model, touch

, or Submit.

Printing a document

1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings if necessary.

Printing 77 · ,

Page 78 of the Lexmark 675 user manual — Printing from a flash drive
Page 78 · click to enlarge
Page 78

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the setting, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch

Printing from a flash drive or mobile device

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark 675 — Printing from a flash drive diagram (page 78)
Fig. 92 · Printing from a flash drive

Printing 78

Page 79 of the Lexmark 675 user manual — Supported flash drives and file types
Page 79 · click to enlarge
Page 79
  • A flash drive icon appears on the printer home screen when a flash drive is inserted.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the printer display. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, touch the document you want to print.

3 Touch the arrows to get a preview of the document.

to specify the number of copies to be printed, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Printing 79 · 4 Use · or

Page 80 of the Lexmark 675 user manual — Storing print jobs in the printer
Page 80 · click to enlarge
Page 80

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Printing from a mobile device

To download a compatible mobile printing application, visit www.lexmark.com/mobile.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the home screen, navigate to:

> Security > Confidential Print > select a print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

Printing 80 · Use To

Page 81 of the Lexmark 675 user manual — For Macintosh users
Page 81 · click to enlarge
Page 81

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It lets you examine if the first copy is satisfactory or not. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

Printing confidential and other held jobs

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

  • 6 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

Printing 81 · Use To · 2 Touch

Page 82 of the Lexmark 675 user manual — Printing a directory list
Page 82 · click to enlarge
Page 82
  • 5 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.

4 Click Submit to save the modified settings.

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Printing 82

Page 83 of the Lexmark 675 user manual — For Macintosh users
Page 83 · click to enlarge
Page 83

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 83 · In Windows 8 · a Click

Page 84 of the Lexmark 675 user manual — Copying using the ADF
Page 84 · click to enlarge
Page 84

Copying

Automatic document feeder (ADF) Scanner glass

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Making copies

Making a quick copy

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press .

Copying using the ADF

1 Load an original document faceup, short edge first into the ADF tray.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Copying 84

Page 85 of the Lexmark 675 user manual — Copying on transparencies
Page 85 · click to enlarge
Page 85
  • The ADF indicator light comes on when the paper is loaded properly.

2 Adjust the paper guides.

3 From the home screen, navigate to:

Copy > specify the copy settings > Copy It

Copying using the scanner glass

1 Place an original document facedown on the scanner glass in the upper left corner.

2 From the home screen, navigate to:

Copy > specify the copy settings > Copy It

If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.

3 Touch Finish the Job.

Copying photos

1 Place a photo facedown on the scanner glass in the upper left corner.

2 From the home screen, navigate to:

Copy > Content > Photo >

3 From the Content Source menu, select the appropriate setting that best matches the original photo.

5 Touch Finish the Job.

Copying on specialty media

Copying on transparencies

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 From the home screen, navigate to:

Copy > Copy from > select the size of the original document

Copying 85 · 4 Touch · > Copy It

Page 86 of the Lexmark 675 user manual — Making copies using paper from a selected tray
Page 86 · click to enlarge
Page 86

3 Navigate to:

Copy to > select the tray that contains transparencies > Copy It

If there are no trays that support transparencies, then navigate to:

Manual Feeder > select the size of the transparencies > Transparency

4 Load transparencies into the multipurpose feeder, and then touch Copy It.

Copying on letterhead

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 From the home screen, navigate to:

Copy > Copy from > select the size of the original document

3 Touch Copy to > Manual Feeder.

4 Place the letterhead faceup, top edge first into the multipurpose feeder.

5 Select the size of the letterhead, and then touch Letterhead > Copy It.

Customizing copy settings

Copying to a different size

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > select the size of the original document

4 Navigate to:

Copy to > select a new size for the copy > Copy It

Making copies using paper from a selected tray

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Copying 86

Page 87 of the Lexmark 675 user manual — Example 2: Copying on a single paper size
Page 87 · click to enlarge
Page 87
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > select the size of the original document

4 Touch Copy to, and then select the tray that contains the paper type you want to use.

5 Touch Copy It.

Copying different paper sizes

Use the ADF to copy original documents with different paper sizes. Depending on the paper sizes loaded and the “Copy to” and “Copy from” settings, each copy is either printed on mixed paper sizes (Example 1) or scaled to fit a single paper size (Example 2).

Example 1: Copying on mixed paper sizes

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > Mixed Sizes > Copy to > Auto Size Match > Copy It

The scanner identifies the different paper sizes as they are scanned. Copies are printed on mixed paper sizes corresponding to the paper sizes of the original document.

Example 2: Copying on a single paper size

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Copy from > Mixed Sizes > Copy to > Letter > Copy It

The scanner identifies the different paper sizes as they are scanned, and then scales the mixed paper sizes to fit on the paper size selected.

Copying 87

Page 88 of the Lexmark 675 user manual — Adjusting copy quality
Page 88 · click to enlarge
Page 88

Copying on both sides of the paper (duplexing)

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Sides (Duplex) > select the preferred duplexing method

> Copy It.

Reducing or enlarging copies

Copies can be scaled from 25% to 400% of the original document size.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Copy.

4 From the Scale area, touch

to enlarge or reduce your copies.

  • The factory default setting for Scale is Auto.
  • If you leave Scale set to Auto, then the content of your original document will be scaled to fit the size of the paper onto which you are copying.
  • Touching Copy to or Copy from after setting Scale manually changes the scale value back to Auto.

5 Touch Copy It.

Adjusting copy quality

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

Copying 88 · 4 Touch · or

Page 89 of the Lexmark 675 user manual — Collating copies
Page 89 · click to enlarge
Page 89
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

  • 4 Touch the button that best represents the content type of the document you are copying.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.
  • Photo —The original document is mostly a photo or an image.
  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • 6 Touch the button that best represents the content source of the document you are copying.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Press —The original document was printed using a printing press.
  • Black/White Laser —The original document was printed using a mono laser printer.
  • Photo/Film —The original document is a photo from a film.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.

> Copy It.

Collating copies

If you print multiple copies of a document, then you can choose to print the copies as a set (collated) or to print the copies as groups of pages (not collated).

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Show 5 more labels / short text on this page
Copying 89 · Copy > Content · 5 Touch · 7 Touch · Collated Not collated
Page 90 of the Lexmark 675 user manual — Copying multiple pages onto a single sheet
Page 90 · click to enlarge
Page 90

3 From the home screen, navigate to:

Copy > enter the number of copies > Collate > select the preferred order of pages >

Placing separator sheets between copies

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Separator Sheets

  • 4 Select one of the following:
  • Between Copies
  • Between Jobs
  • Between Pages
  • Off

> Copy It.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.

  • Make sure to set the paper size to letter, legal, A4, or JIS B5.
  • Make sure to set the copy size to 100%.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Copying 90 · > Copy It · 5 Touch

Page 91 of the Lexmark 675 user manual — Placing an overlay message on each page
Page 91 · click to enlarge
Page 91

3 From the home screen, navigate to:

Copy > Paper Saver > select the output you want >

Placing information on copies

Placing a header or footer on pages

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

4 Select Header or Footer, and then touch

5 Select where you want to insert the header or footer, then select a text option, and then touch

6 Select where you want to print the header or footer, and then touch

7 From the Header/Footer menu, touch

> Copy It.

Placing an overlay message on each page

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

Copy > Overlay > select an overlay message >

4 Touch Copy It.

Copying 91 · > Copy It · Copy > Header/Footer

Page 92 of the Lexmark 675 user manual — Copy to
Page 92 · click to enlarge
Page 92

Canceling a copy job

Canceling a copy job while the original document is in the ADF

When the ADF begins processing a document, touch Cancel Job on the printer control panel.

Canceling a copy job while copying pages using the scanner glass

From the home screen, touch Cancel Job.

Canceling appears on the display. When the job is canceled, the Copy screen appears.

Canceling a copy job while pages are being printed

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Understanding the copy options

Copy from

This option opens a screen where you can select the paper size of the original document.

  • Touch the paper size that matches the original document.
  • To copy an original document that contains mixed paper sizes with the same width, touch Mixed Sizes .
  • To set the printer to automatically detect the size of the original document, touch Auto Size Sense .

Copy to

This option opens a screen where you can enter the paper size and type on which your copies will be printed.

  • Touch the paper size and type that matches the paper loaded.
  • If the settings for “Copy from” and “Copy to” are different, then the printer automatically adjusts the Scale setting to accommodate the difference.
  • If the paper type or size that you want to copy onto is not loaded in one of the trays, then touch Manual Feeder , and manually load the paper in the multipurpose feeder.
  • When “Copy to” is set to Auto Size Match, each copy matches the paper size of the original document. If a matching paper size is not in one of the trays, then Paper size not found appears and prompts to load a paper in a tray or multipurpose feeder.

Copying 92

Page 93 of the Lexmark 675 user manual — Content
Page 93 · click to enlarge
Page 93

Scale

This option lets you scale the document from 25% to 400% of the original document size. You can also set automatic scaling.

  • When copying to a different paper size, such as from legal ‑ size to letter ‑ size paper, set the “Copy from” and “Copy to” paper sizes automatically to scale the scan image to fit the size of the paper onto which you are copying.
  • To decrease or increase the value by 1%, touch

on the printer control panel. To make a continuous decrease or increase in value, hold the button for two seconds or more.

Darkness

This option lets you adjust how light or dark the copies are in relation to the original document.

Sides (Duplex)

This option lets you make one- or two-sided copies from one- or two-sided original documents.

Collate

This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document.

Copies

This option lets you set the number of copies to be printed.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Copying 93 · or

Page 94 of the Lexmark 675 user manual — Header/Footer
Page 94 · click to enlarge
Page 94

Advanced Duplex

This option lets you specify the document orientation, whether documents are one-sided or two-sided, and how documents are bound.

Save As Shortcut

This option lets you save the current settings by assigning a shortcut name.

Margin Shift

This option lets you increase or reduce the size of the margin of a page by shifting the scanned image. Touch

to set the margin you want. If the additional margin is too large, then the copy will be cropped.

Edge Erase

This option lets you remove smudges or marks around the edges of a document. You can choose to remove an equal area around all four sides of the paper, or pick a particular edge. Edge Erase also removes whatever is within the area selected, leaving nothing on that portion of the scan.

Overlay

This option lets you create a watermark (or message) that overlays the content of your copy. You can choose from Confidential, Copy, Draft, Urgent, and Custom. You can type a custom message in the ”Enter the Custom Text Overlay and press OK” field. The message will appear, faintly, in large print across each page.

Cover Page Setup

This option lets you set up the cover page of copies and booklets.

Separator Sheets

This option lets you place a blank sheet of paper between copies, prints, pages, print jobs or copy jobs. The separator sheets can be drawn from a tray that contains a type or color of paper that is different from the paper your copies are printed on.

Header/Footer

This option lets you insert a header or footer and specify its location on a page.

Select one of the following:

  • Bates number
  • Custom text
  • Date/Time
  • Page number

Copying 94 · or

Page 95 of the Lexmark 675 user manual — Adjust ADF Skew
Page 95 · click to enlarge
Page 95

Paper Saver

This option lets you print two or more pages of an original document on the same page. Paper Saver is also called N- up printing where N stands for the number of pages. For example, 2-up would print two pages of your document on a single page, and 4-up would print four pages of your document on a single page.

Advanced Imaging

This option lets you adjust the Auto Center, Background Removal, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you copy the document.

Create Booklet

This option lets you create a sequence of printed and collated pages that, when folded, forms a booklet half the page size of the original document and with all the pages in order. You can choose between one‑sided and two‑sided.

Custom Job

This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is installed.

Adjust ADF Skew

This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.

Copying 95

Page 96 of the Lexmark 675 user manual — Creating an e-mail shortcut using the Embedded Web Server
Page 96 · click to enlarge
Page 96

E-mailing

Automatic document feeder (ADF) Scanner glass

Use the ADF for multiple‑page documents.

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

You can use the printer to e‑mail scanned documents to one or more recipients in three ways. You can type the e‑mail address, use a shortcut number, or use the address book.

Setting up the printer to e-mail

Setting up the e-mail function

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > E-mail/FTP Settings > E-mail Settings.

3 Enter the appropriate information, and then click Submit.

Creating an e-mail shortcut

Creating an e-mail shortcut using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

E-mailing 96

Page 97 of the Lexmark 675 user manual — Sending an e-mail using the printer control panel
Page 97 · click to enlarge
Page 97
  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings.

3 From the Other Settings column, click Manage Shortcuts > E-mail Shortcut Setup.

4 Type a unique name for the e‑mail recipient, and then type the e‑mail address. If you are entering multiple addresses, then separate each address with a comma.

5 Click Add.

Creating an e-mail shortcut using the printer control panel

1 From the home screen, navigate to:

E-mail > Recipient(s) > type the recipient’s e‑mail address >

, and then type the next recipient’s e-mail address.

2 Touch Subject > type the e‑mail subject >

3 Touch Message > type your message >

4 Adjust the e‑mail settings.

5 Touch Save As Shortcut.

6 Type a unique name for the shortcut, and then touch

7 Verify that the shortcut name is correct, and then touch OK.

If the shortcut name is incorrect, then touch Cancel, and then reenter the information.

  • The shortcut name appears in the E-mail Shortcuts icon on the printer home screen.
  • You can use the shortcut when e ‑ mailing another document using the same settings.

E-mailing a document

You can use the printer to e‑mail scanned documents to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For more information, see “Activating the home screen applications” on page 20.

Sending an e-mail using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

E-mailing 97

Page 98 of the Lexmark 675 user manual — Sending an e ‑ mail using the address book
Page 98 · click to enlarge
Page 98
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

4 Type the e‑mail address, or press # and then enter the shortcut number.

, and then enter the e‑mail address or shortcut number that you want to add.

To enter additional recipients, touch

> E‑mail It.

Sending an e ‑ mail using a shortcut number

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 Press #, then enter the shortcut number using the keypad, and then touch

, and then enter the e‑mail address or shortcut number that you want to add.

To enter additional recipients, touch

> E‑mail It.

Sending an e ‑ mail using the address book

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Show 4 more labels / short text on this page
E-mailing 98 · E-mail > Recipient(s) · 5 Touch · 4 Touch
Page 99 of the Lexmark 675 user manual — Changing the output file type
Page 99 · click to enlarge
Page 99

3 From the home screen, navigate to:

E-mail > Recipient(s) >

> type the name of the recipient >

4 Touch the name of the recipient.

To search for additional recipients, touch New Search, and then type the name of the next recipient.

> E‑mail It.

Customizing e-mail settings

Adding e-mail subject and message information

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

E-mail > Recipient(s) > type the e‑mail address >

4 Touch Subject > type the e‑mail subject >

5 Touch Message > type your message >

Changing the output file type

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

E-mail > Recipient(s) > type the e‑mail address >

  • 4 Touch the button that represents the file type you want to send.
  • PDF —Create a single file with multiple pages.
  • Secure PDF —Create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.

E-mailing 99 · 5 Touch · > Send As

Page 100 of the Lexmark 675 user manual — Original Size
Page 100 · click to enlarge
Page 100
  • JPEG —Create and attach a separate file for each page of your original document, viewable by most Web browsers and graphics programs.
  • XPS —Create a single XML Paper Specification (XPS) file with multiple pages, viewable using an Internet Explorerhosted viewer and the .NET Framework, or by downloading a third ‑ party standalone viewer.

> E‑mail It.

Canceling an e-mail

  • When using the ADF, touch Cancel Job while Scanning appears.
  • When using the scanner glass, touch Cancel Job while Scanning appears, or while Scan the Next Page / Finish the Job appears.

Understanding the e-mail options

Recipient(s)

This option lets you enter the recipient of your e-mail. You may enter multiple e‑mail addresses.

Subject

This option lets you type a subject line for your e-mail.

Message

This option lets you type a message that will be sent with your scanned attachment.

File Name

This option lets you customize the attachment file name.

Save As Shortcut

This option lets you save the current settings as a shortcut by assigning a shortcut name.

Original Size

This option lets you set the paper size of the documents you are going to e‑mail. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).

E-mailing 100 · 5 Touch

Page 101 of the Lexmark 675 user manual — Content
Page 101 · click to enlarge
Page 101

Darkness

This option lets you adjust how light or dark your scanned documents are in relation to the original document.

Resolution

This option lets you adjust the output quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Send As

This option lets you set the output type for the scan image.

Select one of the following:

  • PDF —Use this to create a single file with multiple pages.
  • Note: PDF is the factory default setting.
  • Secure PDF —Use this to create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Use this to create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu of the Embedded Web Server, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
  • JPEG —Use this to create and attach a separate file for each page of your original document.
  • XPS —Use this to create a single XPS file with multiple pages.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

E-mailing 101

Page 102 of the Lexmark 675 user manual — Adjust ADF Skew
Page 102 · click to enlarge
Page 102

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on only one side or on both sides of the paper. This also identifies what needs to be scanned for inclusion in the e-mail.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Custom Job

This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is installed.

Scan Preview

This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears.

Transmission Log

This option lets you print the transmission log or transmission error log.

Edge Erase

This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the area selected, leaving nothing on that portion of the scan.

Advanced Imaging

This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e‑mail the document.

Adjust ADF Skew

This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.

E-mailing 102

Page 103 of the Lexmark 675 user manual — Setting up the printer to fax
Page 103 · click to enlarge
Page 103

Faxing

Automatic document feeder (ADF) Scanner glass

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Setting up the printer to fax

  • The following connection methods are applicable only in select countries or regions.
  • During the initial printer setup, clear the fax function check box and any other function you plan to set up later, and then press Continue .
  • The indicator light may blink red if the fax function is enabled but not fully set up.

Faxing 103

Page 104 of the Lexmark 675 user manual — Using the Embedded Web Server for fax setup
Page 104 · click to enlarge
Page 104
Lexmark 675 — Initial fax setup diagram (page 104)
Fig. 93 · Initial fax setup

Initial fax setup

Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual). For more information, see “Regulatory notices for telecommunication terminal equipment” on page 308.

To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web Server and then enter the Settings menu.

Using the printer control panel for fax setup

When the printer is turned on for the first time, a series of start‑up screens appear. If the printer has fax capabilities, then the Fax Name and Fax Number screens appear.

1 When the Fax Name screen appears, do the following: a Enter the name to be printed on all outgoing faxes. b Enter the fax name, and then touch Submit.

2 When the Fax Number screen appears, enter the fax number, and then touch Submit.

Using the Embedded Web Server for fax setup

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup.

3 In the Fax Name field, type the name to be printed on all outgoing faxes.

Faxing 104

Page 105 of the Lexmark 675 user manual — Scenario 1: Standard telephone line
Page 105 · click to enlarge
Page 105

4 In the Fax Number field, enter the printer fax number.

5 Click Submit.

Choosing a fax connection

Scenario 1: Standard telephone line

Setup 1: Printer is connected to a dedicated fax line

Lexmark 675 — Scenario 1: Standard telephone line diagram (page 105)
Fig. 94 · Scenario 1: Standard telephone line
Lexmark 675 — Scenario 1: Standard telephone line diagram (page 105)
Fig. 95 · Scenario 1: Standard telephone line

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

Faxing 105

Page 106 of the Lexmark 675 user manual — Setup 2: Printer is sharing the line with an answering machine
Page 106 · click to enlarge
Page 106
  • You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).
  • If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of rings that you want.

Setup 2: Printer is sharing the line with an answering machine

Connected to the same telephone wall jack

Lexmark 675 — Setup 2: Printer is sharing the line with an answering machine diagram (page 106)
Fig. 96 · Setup 2: Printer is sharing the line with an answeri…

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

3 Connect the answering machine to the port of the printer.

Faxing 106

Page 107 of the Lexmark 675 user manual — Choosing a fax connection
Page 107 · click to enlarge
Page 107

Connected to different wall jacks

Lexmark 675 — Choosing a fax connection diagram (page 107)
Fig. 97 · Choosing a fax connection

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

  • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On).
  • Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
  • If you subscribe to a distinctive ring service provided by your telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes automatically.

Faxing 107

Page 108 of the Lexmark 675 user manual — Choosing a fax connection
Page 108 · click to enlarge
Page 108
Setup 3Printer is sharing the line with a telephone subscribed to voice mail service
Lexmark 675 — Choosing a fax connection diagram (page 108)
Fig. 98 · Choosing a fax connection

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog wall jack.

3 Connect the telephone to the port of the printer.

  • This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes automatically.
  • If you have only one telephone number on your line, then you need to set the printer to receive faxes manually (Auto Answer Off).

When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the telephone to receive the fax. • You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off the voice mail service when you are expecting a fax. This setting works best if you are using voice mail more often than fax.

Faxing 108

Page 109 of the Lexmark 675 user manual — Scenario 2: Digital Subscriber Line (DSL)
Page 109 · click to enlarge
Page 109

Scenario 2: Digital Subscriber Line (DSL)

Lexmark 675 — Scenario 2: Digital Subscriber Line (DSL) diagram (page 109)
Fig. 99 · Scenario 2: Digital Subscriber Line (DSL)

A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.

To minimize interference between the two channels and ensure a quality connection, you need to install a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network. Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and slow Internet connection on your computer.

To install a filter for the printer:

1 Connect the line port of the DSL filter to the wall jack.

2 Connect one end of the telephone cable that came with your printer to the port of the printer. Connect the other end to the phone port on the DSL filter.

3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter.

4 To connect a telephone to the printer, remove any installed adapter plug from the port of the printer, and then connect the telephone to the port.

Faxing 109

Page 110 of the Lexmark 675 user manual — Scenario 3: VoIP telephone service
Page 110 · click to enlarge
Page 110

Scenario 3: VoIP telephone service

Lexmark 675 — Scenario 3: VoIP telephone service diagram (page 110)
Fig. 100 · Scenario 3: VoIP telephone service

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.

3 Connect the telephone to the port of the printer.

  • To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two phone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the port labeled Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.

Faxing 110

Page 111 of the Lexmark 675 user manual — Scenario 4: Digital telephone service through a cable provider
Page 111 · click to enlarge
Page 111

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

Lexmark 675 — Scenario 4: Digital telephone service through a cable provider diagram (page 111)
Fig. 101 · Scenario 4: Digital telephone service through a cabl…

1 Connect one end of the telephone cable that came with your printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

3 Connect your analog telephone phone to the port of the printer.

  • To make sure that the telephone port on the cable modem is active, plug an analog telephone into the telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
  • If you need two telephone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second telephone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port , and then plug the printer and telephone into the splitter.
  • Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.

Faxing 111

Page 112 of the Lexmark 675 user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 112 · click to enlarge
Page 112

Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility

Lexmark 675 — Scenario 5: Countries or regions with different telephone wall jacks and plugs diagram (page 112)
Fig. 102 · Scenario 5: Countries or regions with different tele…

1 Connect one end of the telephone cable that came with your printer to the port of the printer.

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

3 Connect your analog telephone to the port of the printer.

Scenario 5: Countries or regions with different telephone wall jacks and plugs

Some countries or regions may have different types of telephone wall jack connectors than those that came with the printer. The standard wall jack adopted by most countries or regions is RJ-11. Your printer comes with the RJ-11 jack and a telephone cable with the RJ-11 plug.

Faxing 112

Page 113 of the Lexmark 675 user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 113 · click to enlarge
Page 113

If the wall jack or equipment in your facility is not compatible with this type of connection, then you need to use a telephone adapter. An adapter for your country or region may not come with your printer, and you may need to purchase it separately.

There may be an adapter plug installed in the port of the printer. If you are using a telephone adapter or a facility that has a cascaded or serial wiring scheme, then do not remove the adapter plug from the port of the printer.

Part name Part number

Lexmark adapter plug 40X8519

Faxing 113

Page 114 of the Lexmark 675 user manual — Scenario 5: Countries or regions with different telephone wall jacks and plugs
Page 114 · click to enlarge
Page 114

Connecting the printer to a non‑RJ‑11 wall jack

Lexmark 675 — Scenario 5: Countries or regions with different telephone wall jacks and plugs diagram (page 114)
Fig. 103 · Scenario 5: Countries or regions with different tele…

1 Connect one end of the telephone cable that came with printer to the port of the printer.

2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.

3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.

  • The port of the printer may have an adapter plug for use with the adapter. Do not remove the plug from the port of the printer.
  • In some countries or regions, the printer may not come with a telephone adapter or an adapter plug.

Faxing 114

Page 115 of the Lexmark 675 user manual — Connecting the printer to a wall jack in Germany
Page 115 · click to enlarge
Page 115

Connecting the printer to a wall jack in Germany

The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.

Lexmark 675 — Connecting the printer to a wall jack in Germany diagram (page 115)
Fig. 104 · Connecting the printer to a wall jack in Germany

Connect the printer to any of the N ports.

Lexmark 675 — Connecting the printer to a wall jack in Germany diagram (page 115)
Fig. 105 · Connecting the printer to a wall jack in Germany

Faxing 115

Page 116 of the Lexmark 675 user manual — Setting the outgoing fax name and number
Page 116 · click to enlarge
Page 116

1 Connect one end of the telephone cable that came the printer to the port of the printer.

2 Connect the other end of the telephone cable to the RJ‑11 adapter, and then connect the adapter to an N port.

3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown.

Connecting to a distinctive ring service

A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, then follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the printer LINE port .

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Lexmark 675 — Connecting to a distinctive ring service diagram (page 116)
Fig. 106 · Connecting to a distinctive ring service

3 Change the distinctive rings setting to match the setting you want for the printer to answer.

> Settings > Fax Settings > Analog Fax Setup > Answer On

b Select the pattern setting you want to change, and then touch

Setting the outgoing fax name and number

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup.

Faxing 116

Page 117 of the Lexmark 675 user manual — Sending a fax using the printer control panel
Page 117 · click to enlarge
Page 117

3 In the Fax Name field, type the name to be printed on all outgoing faxes.

4 In the Fax Number field, enter the printer fax number.

5 Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Security > Set Date and Time.

3 In the Manually Set Date & Time field, enter the current date and time.

4 Click Submit.

Configuring the printer to observe daylight saving time

The printer can be set to automatically adjust for daylight saving time:

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Security > Set Date and Time.

3 Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom Time Zone Setup section.

4 Click Submit.

Sending a fax

You can use the printer to send a fax to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the printer home screen. For more information, see “Activating the home screen applications” on page 20.

Sending a fax using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Faxing 117

Page 118 of the Lexmark 675 user manual — Sending a fax using the computer
Page 118 · click to enlarge
Page 118
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Fax.

4 From the printer control panel keypad, enter the fax number or the shortcut number.

, and then enter the recipient's telephone number or shortcut number, or search the address book.

5 Touch Fax It.

Sending a fax using the computer

The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.

1 With a document open, click File > Print.

2 Select the printer, and then click Properties, Preferences, Options, or Setup.

3 Navigate to:

Fax tab > Enable fax

4 Enter the recipient fax number or numbers in the “Fax number(s)” field.

5 If necessary, enter a prefix in the “Dialing prefix” field.

6 Select the appropriate paper size and page orientation.

7 If you want to include a cover page with the fax, then select Include cover page with fax, and then enter the appropriate information.

8 Click OK.

  • The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD.
  • The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used.
  • If the Always display settings prior to faxing check box is selected, then you are prompted to verify the recipient information before the fax is sent. If this check box is cleared, then the queued document is sent automatically as a fax when you click OK on the Fax tab.

Faxing 118

Page 119 of the Lexmark 675 user manual — Sending a fax at a scheduled time
Page 119 · click to enlarge
Page 119

Sending a fax using a shortcut number

Fax shortcuts are like the speed dial numbers on a telephone or a fax machine. A shortcut number (1–999) can contain a single recipient or multiple recipients.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press #, and then enter the shortcut number using the keypad.

4 Touch Fax It.

Sending a fax using the address book

The address book feature lets you search for bookmarks and network directory servers.

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

> type the name of the recipient >

4 Touch the name of the recipient, and then touch Fax It.

Sending a fax at a scheduled time

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

Faxing 119 · Fax >

Page 120 of the Lexmark 675 user manual — Creating a fax destination shortcut using the printer control panel
Page 120 · click to enlarge
Page 120

3 From the home screen, navigate to:

Fax > enter the fax number > Options > Delayed Send

4 Specify the time the fax will be transmitted, and then touch

5 Touch Fax It.

Creating shortcuts

Creating a fax destination shortcut using the Embedded Web Server

Assign a shortcut number to a single fax number or a group of fax numbers.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Manage Shortcuts > Fax Shortcut Setup.

3 Type a name for the shortcut, and then enter the fax number.

  • To create a multiple ‑ number shortcut, enter the fax numbers for the group.
  • Separate each fax number in the group with a semicolon (;).

4 Assign a shortcut number.

5 Click Add.

Creating a fax destination shortcut using the printer control panel

1 From the home screen, touch Fax, and then enter the fax number.

To create a group of fax numbers, touch

, and then enter the other fax number.

Faxing 120 · 2 Touch

Page 121 of the Lexmark 675 user manual — Viewing a fax log
Page 121 · click to enlarge
Page 121

3 Type a unique name for the shortcut, and then touch

4 Verify that the shortcut name and number are correct, and then touch OK.

If the name or number is incorrect, then touch Cancel, and then reenter the information.

Customizing fax settings

Changing the fax resolution

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Fax, and then enter the fax number.

4 From the Resolution area, touch

to change to the resolution you want.

5 Touch Fax It.

Making a fax lighter or darker

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, touch Fax, and then enter the fax number.

4 From the Darkness area, touch

to adjust the darkness setting of the fax.

5 Touch Fax It.

Viewing a fax log

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Faxing 121 · or · or

Page 122 of the Lexmark 675 user manual — Canceling a fax after the original documents have been scanned to memory
Page 122 · click to enlarge
Page 122
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Reports.

3 Click Fax Job Log or Fax Call Log.

Blocking junk faxes

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.

  • This option blocks all incoming faxes that have a private caller ID or have no fax name.
  • In the Banned Fax List field, enter the phone numbers or type the fax names of specific fax callers you want to block.

Canceling an outgoing fax

Canceling a fax while the original documents are still scanning

  • When using the ADF, touch Cancel Job on the printer control panel while Scanning appears.
  • When using the scanner glass, touch Cancel Job on the printer control panel while Scanning appears or while Scan the Next Page and Finish the Job appear.

Canceling a fax after the original documents have been scanned to memory

1 On the home screen, touch Cancel Jobs.

The Cancel Jobs screen appears.

2 Touch the job or jobs you want to cancel.

Only three jobs appear on the screen; touch the down arrow until the job you want appears, and then touch the job you want to cancel.

3 Touch Delete Selected Jobs.

The Deleting Selected Jobs screen appears, the selected jobs are deleted, and then the home screen appears.

Faxing 122

Page 123 of the Lexmark 675 user manual — Forwarding a fax
Page 123 · click to enlarge
Page 123

Holding and forwarding faxes

Holding faxes

This option lets you hold received faxes from printing until they are released. Held faxes can be released manually or at a scheduled day or time.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings > Analog Fax Setup > Holding Faxes.

  • 3 From the Held Fax Mode menu, select one of the following:
  • Off
  • Always On
  • Manual
  • Scheduled

4 If you selected Scheduled, then continue with the following steps: a Click Fax Holding Schedule. b From the Action menu, select Hold faxes.

c From the Time menu, select the time you want the held faxes released. d From the Day(s) menu, select the day you want the held faxes released.

5 Click Add.

Forwarding a fax

This option lets you print and forward received faxes to a fax number, e‑mail address, FTP site, or LDSS.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Fax Settings.

3 From the Fax Forwarding menu, select Print, Print and Forward, or Forward.

4 From the “Forward to” menu, select Fax, E‑mail, FTP, LDSS, or eSF.

5 In the “Forward to Shortcut” field, enter the shortcut number where you want the fax forwarded.

6 Click Submit.

Faxing 123

Page 124 of the Lexmark 675 user manual — Page Setup
Page 124 · click to enlarge
Page 124

Understanding the fax options

Content

This option lets you specify the content type and source of the original document.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Resolution

This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Select one of the following:

  • Standard —Use this when faxing most documents.
  • Fine 200 dpi —Use this when faxing documents with small prints.
  • Super fine 300 dpi —Use this when faxing documents with fine details.
  • Ultra fine 600 dpi —Use this when faxing documents with pictures or photos.

Darkness

This option lets you adjust how light or dark the faxes are in relation to the original document.

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on one side or on both sides of the page (duplex). This also identifies what needs to be scanned for inclusion in the fax.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Faxing 124

Page 125 of the Lexmark 675 user manual — Adjust ADF Skew
Page 125 · click to enlarge
Page 125

Custom Job

This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is installed.

Scan Preview

This option lets you view the first page of the image before it is included in the fax. When the first page is scanned, the scanning is paused and a preview image appears.

Delayed Send

This option lets you send a fax at a later time or date.

Advanced Imaging

This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you fax the document.

Edge Erase

This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the area selected, leaving nothing on that portion of the scan.

Transmission Log

This option lets you print the transmission log or transmission error log.

Adjust ADF Skew

This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.

Faxing 125

Page 126 of the Lexmark 675 user manual — Scanning to an FTP address
Page 126 · click to enlarge
Page 126

Scanning

Lexmark 675 — Scanning diagram (page 126)
Fig. 107 · Scanning

Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or

photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a computer or a flash drive. The computer does not have to be directly connected to the printer for you to receive Scan to PC images. You can scan the document back to the computer over the network by creating a scan profile on the computer and then downloading the profile to the printer.

Using Scan to Network

Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server. For more information, see “Setting up Scan to Network” on page 23.

Scanning to an FTP address

Lexmark 675 — Scanning to an FTP address diagram (page 126)
Fig. 108 · Scanning to an FTP address

Scanning 126

Page 127 of the Lexmark 675 user manual — Creating an FTP shortcut using the printer control panel
Page 127 · click to enlarge
Page 127

Automatic document feeder (ADF) Scanner glass

Use the ADF for multiple‑page documents including two-sided (duplex) pages.

Use the scanner glass for single-page documents, book pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.

When an FTP destination has been configured by your system support person, the name of the destination becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination could also be another PostScript printer; for example, a color document can be scanned and then sent to a color printer.

Creating shortcuts

Instead of entering the entire FTP site address on the printer control panel each time you want to send a document to an FTP server, you can create a permanent FTP destination and assign a shortcut number. There are two methods for creating shortcut numbers: using the Embedded Web Server and using the printer control panel.

Creating an FTP shortcut using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Navigate to:

Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup

3 Enter the appropriate information.

4 Enter a shortcut number.

5 Click Add.

Creating an FTP shortcut using the printer control panel

1 From the home screen, navigate to:

FTP > FTP Address > type the FTP address >

> type a name for the shortcut >

2 Verify that the shortcut name and number are correct, and then touch OK.

If the name or number is incorrect, then touch Cancel, and then reenter the information. If you enter a number that is already in use, then you will be prompted to select another number.

Scanning 127 · >

Page 128 of the Lexmark 675 user manual — Scanning to an FTP address using a shortcut number
Page 128 · click to enlarge
Page 128

Scanning to an FTP address

You can use the printer to send scanned documents to an FTP address in a number of ways. You can type the FTP address, use a shortcut number, or use the address book. You can also use the Multi Send, Scan to Network, or MyShortcut application from the printer home screen. For more information, see the “Activating the home screen applications” on page 20.

Scanning to an FTP address using the printer control panel

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the home screen, navigate to:

FTP > FTP Address > type the FTP address >

Scanning to an FTP address using a shortcut number

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 From the printer control panel, press # on the keypad, and then enter the FTP shortcut number.

4 Touch Scan It.

Scanning 128 · > Scan It

Page 129 of the Lexmark 675 user manual — Scanning to a computer using the Embedded Web Server
Page 129 · click to enlarge
Page 129

Scanning to a computer or flash drive

Automatic Document Feeder (ADF) Scanner glass

Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or

photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a computer or a flash drive. The computer does not have to be directly connected to the printer for you to receive Scan to PC images. You can scan the document back to the computer over the network by creating a scan profile on the computer and then downloading the profile to the printer.

Scanning to a computer using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Scan Profile > Create Scan Profile.

3 Select your scan settings, and then click Next.

4 Select a location on your computer where you want to save the scan image.

5 Type a scan name, and then a user name.

6 Click Submit.

7 Review the instructions on the Scan Profile screen. a Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Scanning 129

Page 130 of the Lexmark 675 user manual — In Windows 7 or earlier
Page 130 · click to enlarge
Page 130
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly. b If you are loading a document into the ADF tray, then adjust the paper guides.

c Do either of the following:

  • Press # , and then enter the shortcut number using the keypad.
  • From the home screen, navigate to: Held Jobs > Profiles > select your shortcut on the list

8 View the file from the computer.

Setting up Scan to Computer

  • This feature is supported only in Windows Vista or later.
  • Make sure that your computer and printer are connected to the same network.

1 Open the printers folder.

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Depending on your operating system, click Add devices and printers, Add a device, or Add a printer.

3 Select your printer from the list.

4 Click Next > Close.

  • 5 Depending on your device, do either of the following:
  • Press and hold the printer you want to configure.
  • Right ‑ click the printer you want to configure.

6 From the menu that appears, select Scan Properties or Properties, and then change the settings as necessary.

Scanning 130 · a Click

Page 131 of the Lexmark 675 user manual — Save As Shortcut
Page 131 · click to enlarge
Page 131
  • 7 From the printer control panel, touch Scan to Computer and then select from the following options:
  • Scan —Scan and save the document directly to a selected location on the computer.
  • Scan for Print —Scan and automatically print the document.
  • Scan for E ‑ mail —Attach a scanned document to an e ‑ mail.
  • Scan for Fax —Attach a scanned document to be sent through fax.
  • Scan for OCR —Scan the document using an optical character recognition (OCR) software that turns your printed documents into various electronic formats, including Microsoft Word, Microsoft Excel, and searchable PDF. For help, see the documentation that came with the OCR software.

8 Touch Send It.

Remote scan in progress appears on the printer display. The scanned image opens automatically on the computer screen.

Scanning to a flash drive

1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
  • The ADF indicator light comes on when the paper is loaded properly.

2 If you are loading a document into the ADF tray, then adjust the paper guides.

3 Insert the flash drive into the USB port on the front of the printer.

4 Select the destination folder, and then touch Scan to USB drive.

5 Adjust the scan settings, and then touch Scan It.

Understanding the scan options

FTP Address

This option lets you enter the IP address for the FTP destination.

File Name

This option lets you type a file name for the scan image.

Save As Shortcut

This option lets you save the current settings as a shortcut by assigning a shortcut name.

Scanning 131

Page 132 of the Lexmark 675 user manual — Content
Page 132 · click to enlarge
Page 132

Original Size

This option lets you set the paper size of the documents you are going to scan. When Original Size is set to Mixed Sizes, you can scan an original document that contains mixed paper sizes (letter‑ and legal‑size pages).

Darkness

This option lets you adjust how light or dark the scanned documents are in relation to the original document.

Resolution

This option lets you adjust the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size.

Send As

This option lets you set the output type for the scan image.

Select one of the following:

  • PDF —Use to create a single file with multiple pages.
  • Secure PDF —Use to create an encrypted PDF file that protects the file contents from unauthorized access.
  • TIFF —Use to create multiple files or a single file. If Multi-page TIFF is turned off in the Settings menu, then TIFF saves one page in each file. The file size is usually larger than an equivalent JPEG.
  • JPEG —Use to create and attach a separate file for each page of the original document.
  • XPS —Use to create a single XPS file with multiple pages.

Content

This option lets you set the original document type and source.

Select from the following content types:

  • Graphics —The original document is mostly business ‑ type graphics, such as pie charts, bar charts, and animations.
  • Photo —The original document is mostly a photo or an image.
  • Text —The content of the original document is mostly text or line art.
  • Text/Photo —The original document is a mixture of text, graphics, and photos.

Select from the following content sources:

  • Black/White Laser —The original document was printed using a mono laser printer.
  • Color Laser —The original document was printed using a color laser printer.
  • Inkjet —The original document was printed using an inkjet printer.
  • Magazine —The original document is from a magazine.
  • Newspaper —The original document is from a newspaper.
  • Other —The original document was printed using an alternate or unknown printer.

Scanning 132

Page 133 of the Lexmark 675 user manual — Adjust ADF Skew
Page 133 · click to enlarge
Page 133
  • Photo/Film —The original document is a photo from film.
  • Press —The original document was printed using a printing press.

Page Setup

This option lets you change the following settings:

  • Sides (Duplex) —This specifies if the original document is printed on only one side or on both sides of the paper.
  • Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
  • Binding —This specifies if the original document is bound on the long ‑ edge or short ‑ edge side.

Transmission Log

This option lets you print the transmission log or transmission error log.

Scan Preview

This option lets you view the first page of the image before it is included in the file. When the first page is scanned, the scanning is paused and a preview image appears.

Edge Erase

This option lets you remove smudges or any mark around the edges of a document. You can remove an equal area around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes whatever is within the area selected, leaving nothing on that portion of the scan.

Advanced Imaging

This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you scan the document.

Custom Job

This option lets you combine multiple scan jobs into a single job and appears only when a working printer hard disk is installed.

Adjust ADF Skew

This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.

Scanning 133

Page 134 of the Lexmark 675 user manual — Understanding the printer menus
Page 134 · click to enlarge
Page 134

Understanding the printer menus 134

Understanding the printer menus

Menus list

Paper Menu Reports Network/Ports Security

Default Source Paper Size/Type

Menu Settings Page Device Statistics

Edit Security Settings Miscellaneous Security

Network Setup Page1

Parallel [x] Serial [x]

Network [x] Setup Page

Set Date and Time

E‑mail Shortcuts

FTP Shortcuts Profiles List

Settings Help Manage Shortcuts Option Card Menu3

A list of installed DLEs (Download Emulators) appears.

E‑mail Guide

E‑mail Settings

Information Guide Supplies Guide

1 Depending on the printer setup, this menu appears as Network Setup Page or Network [x] Setup Page.

2 Depending on the printer setup, this menu appears as Standard Network or Network [x].

3 This menu appears only when one or more DLEs are installed.

Show 44 more labels / short text on this page
Active NIC · Standard Network2 · Configure MP · Stapler Test · Standard USB · Settings · Substitute Size · Confidential Print Menu · Paper Texture · Erase Temporary Data · Files · Paper Weight · Shortcut List · SMTP Setup · Paper Loading · Fax Job Log · Security Audit Log · Custom Types · Fax Call Log · Custom Names1 · Copy Shortcuts · Custom Scan Sizes · Universal Setup · Fax Shortcuts · Print Fonts · Print Directory · Print Demo · Asset Report · General Settings · Print All Guides · Fax Shortcuts · Copy Settings · Copy Guide · E-mail Shortcuts · Fax Settings · FTP Shortcuts · Fax Guide · Copy Shortcuts · FTP Settings · FTP Guide · Profile Shortcuts · Flash Drive Menu · Print Defects Guide · Print Settings
Page 135 of the Lexmark 675 user manual — Paper Size/Type menu
Page 135 · click to enlarge
Page 135

Understanding the printer menus 135

Paper menu

Default Source menu

Set a default paper source for all print jobs.

Tray [x] Multipurpose Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. The multipurpose feeder may also be linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and the multipurpose feeder.
Show 4 more labels / short text on this page
Use To · Default Source · Use To · Tray [x] Size
Page 136 of the Lexmark 675 user manual — Paper menu
Page 136 · click to enlarge
Page 136

Understanding the printer menus 136

Specify the type of paper loaded in each tray.

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for Multipurpose Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. Make sure to set the paper size value.

Use To · Tray [x] Type · Multipurpose Feeder Size

Page 137 of the Lexmark 675 user manual — Paper menu
Page 137 · click to enlarge
Page 137

Understanding the printer menus 137

Specify the paper type loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure to “Cassette” for Multipurpose Feeder Type to appear as a menu.

Specify the size of the paper being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Use To · Multipurpose Feeder Type · Manual Paper Size

Page 138 of the Lexmark 675 user manual — Configure MP menu
Page 138 · click to enlarge
Page 138

Understanding the printer menus 138

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.
Show 7 more labels / short text on this page
Use To · Manual Paper Type · Manual Envelope Size · Manual Envelope Type · Use To · Configure MP · Cassette Manual First
Page 139 of the Lexmark 675 user manual — Paper Texture menu
Page 139 · click to enlarge
Page 139

Understanding the printer menus 139

Substitute Size menu

Substitute a specified paper size if the requested paper size is not available.

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without Change Paper appearing.

Paper Texture menu

Specify the relative texture of the plain paper loaded.

Specify the relative texture of the card stock loaded.

  • Normal is the factory default setting.
  • The options appear only if card stock is supported.

Specify the relative texture of the transparencies loaded.

Specify the relative texture of the recycled paper loaded.

Specify the relative texture of the labels loaded.

Specify the relative texture of the bond paper loaded.

Specify the relative texture of the envelopes loaded.

Show 17 more labels / short text on this page
Use To · Substitute Size · Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough
Page 140 of the Lexmark 675 user manual — Paper Weight menu
Page 140 · click to enlarge
Page 140

Understanding the printer menus 140

Specify the relative texture of the rough envelopes loaded.

Specify the relative texture of the letterhead loaded.

Specify the relative texture of the preprinted paper loaded.

Specify the relative texture of the colored paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the paper loaded.

Specify the relative texture of the cotton paper loaded.

Specify the relative texture of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only if the custom type is supported.

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Show 22 more labels / short text on this page
Use To · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough · Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy
Page 141 of the Lexmark 675 user manual — Paper Weight menu
Page 141 · click to enlarge
Page 141

Understanding the printer menus 141

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Specify the relative weight of the labels loaded.

Specify the relative weight of the bond paper loaded.

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Specify the relative weight of the colored paper loaded.

Specify that the relative weight of the paper loaded is light.

Specify the relative weight of the paper loaded is heavy.

Show 23 more labels / short text on this page
Use To · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy
Page 142 of the Lexmark 675 user manual — Paper Loading menu
Page 142 · click to enlarge
Page 142

Understanding the printer menus 142

Specify the relative weight of the cotton or rough paper loaded.

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.

Paper Loading menu

Determine and set two‑sided printing for all print jobs that specify Recycled as the paper type.

Determine and set two‑sided printing for all print jobs that specify Bond as the paper type.

Determine and set two‑sided printing for all print jobs that specify Letterhead as the paper type.

Determine and set two‑sided printing for all print jobs that specify Preprinted as the paper type.

Determine and set two‑sided printing for all print jobs that specify Colored as the paper type.

Determine and set two‑sided printing for all print jobs that specify Light as the paper type.

Determine and set two‑sided printing for all print jobs that specify Heavy as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.
Show 20 more labels / short text on this page
Use To · Rough/Cotton Weight · Light Normal Heavy · Custom [x] Weight · Light Normal Heavy · Use To · Recycled Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off · Heavy Loading · Duplex Off
Page 143 of the Lexmark 675 user manual — Custom Names menu
Page 143 · click to enlarge
Page 143

Understanding the printer menus 143

Determine and set two‑sided printing for all print jobs that specify Custom [x] as the paper type.

  • Duplex sets two ‑ sided printing as the default for all print jobs unless one ‑ sided printing is set from Printing Preferences or Print dialog.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including one ‑ sided jobs.
  • Off is the factory default setting for all the menus.

Custom Types menu

Associate a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined custom name created in the Embedded Web Server or MarkVisionTM Professional. The user‑defined name appears instead of Custom Type [x].

Paper Card Stock Transparency Rough/Cotton Labels Envelope

  • Paper is the factory default setting for Custom Type [x].
  • The custom media type must be supported in the selected tray or feeder in order to print from that source.

Specify a paper type when the Recycled setting is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Envelope Cotton

  • Paper is the factory default setting.
  • The Recycled paper type must be supported in the selected tray or feeder in order to print from that source.

Custom Names menu

Custom Name [x] Specify a custom name for a paper type. This name replaces Custom Type [x] in the printer menus.

Show 7 more labels / short text on this page
Use To · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled · Use To
Page 144 of the Lexmark 675 user manual — Universal Setup menu
Page 144 · click to enlarge
Page 144

Understanding the printer menus 144

Custom Scan Sizes menu

Custom Scan Size [x]

Specify a custom scan size name and page orientation.

Scan Size Name Width Height Orientation

  • The custom scan size name replaces Custom Scan Size [x] in the printer menus.
  • ADF Media Type is the factory default setting for custom scan sizes 3, 4, 5, and 6.
  • 8.5 inches is the U.S. factory default setting for Width. 210 millimeters is the international factory default setting for Width.
  • 14 inches is the U.S. factory default setting for Height. 297 millimeters is the international factory default setting for Height.
  • Portrait is the factory default setting for Orientation.
  • Off is the factory default setting for “2 scans per side.”

Portrait Landscape 2 scans per side Off On

Universal Setup menu

Identify the units of measure.

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Set the portrait width.

3–8.5 inches 76–216 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. You can increase the width in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. You can increase the width in 1 ‑ mm increments.

Set the portrait height.

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. You can increase the height in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. You can increase the height in 1 ‑ mm increments.
Show 6 more labels / short text on this page
Use To · Use To · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height
Page 145 of the Lexmark 675 user manual — Reports menu
Page 145 · click to enlarge
Page 145

Understanding the printer menus 145

Specify the feed direction if the paper can be loaded in either direction.

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Reports Menu

Reports menu

Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarm settings, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.

Device Statistics Print a report containing printer statistics such as supply information and number of printed pages.

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

Network [x] Setup Page Print a report containing information about the network settings of the printer, such as the TCP/IP address information.

Shortcut List Print a report containing information about configured shortcuts.

Fax Job Log Print a report containing information about the last 200 completed faxes.

  • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu.
  • This menu is supported only in select printer models.

Fax Call Log Print a report containing information about the last 100 attempted, received, and blocked calls.

  • This menu item appears only when Enable Job Log is set to On in the Fax Settings menu.
  • This menu is supported only in select printer models.

Copy Shortcuts Print a report containing information about copy shortcuts.

E‑mail Shortcuts Print a report containing information about e‑mail shortcuts.

Use To · Feed Direction · Use To

Page 146 of the Lexmark 675 user manual — Standard Network or Network [x] menu
Page 146 · click to enlarge
Page 146

Understanding the printer menus 146

Fax Shortcuts Print a report containing information about fax shortcuts.

FTP Shortcuts Print a report containing information about FTP shortcuts.

Profiles List Print a list of profiles stored in the printer.

Print Fonts Print a report of all the fonts available for the printer language currently set in the printer.

Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk.

  • Job Buffer Size must be set to 100%.
  • Make sure the optional flash memory or printer hard disk is working and installed correctly.

Asset Report Print a report containing asset information including the printer serial number and model name. The report contains text and UPC bar codes that can be scanned into an asset database.

Network/Ports menu

Active NIC menu

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only when an optional network card is installed.

Standard Network or Network [x] menu

Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
Show 6 more labels / short text on this page
Use To · Use To · Active NIC · Use To · PCL SmartSwitch · On Off
Page 147 of the Lexmark 675 user manual — Network/Ports menu
Page 147 · click to enlarge
Page 147

Understanding the printer menus 147

Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the network input buffer.

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel, and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Standard Network Setup or Network [x] Setup

Display and set the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Show 8 more labels / short text on this page
Use To · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Mac Binary PS · On Off Auto
Page 148 of the Lexmark 675 user manual — TCP/IP menu
Page 148 · click to enlarge
Page 148

Understanding the printer menus 148

Reports menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Reports
  • Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Network Card
  • Network/Ports > Network [x] > Network [x] Setup > Network Card

View the connection status of the network card.

View Card Speed View the speed of an active network card.

View the network addresses.

UAA LAA

Job Timeout 0–255 seconds Set the amount of time it takes for a network print job to be canceled.

  • 90 seconds is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value of 1–9 is selected, then the setting is saved as 10.

TCP/IP menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Set Hostname Set the current TCP/IP host name.

IP Address View or change the current TCP/IP address.

Show 6 more labels / short text on this page
Use To · Use To · View Card Status · Connected Disconnected · Network Address · Use To
Page 149 of the Lexmark 675 user manual — IPv6 menu
Page 149 · click to enlarge
Page 149

Understanding the printer menus 149

Netmask View or change the current TCP/IP netmask.

Gateway View or change the current TCP/IP gateway.

Specify the DHCP address and parameter assignment.

Specify the RARP address assignment setting.

Specify the BOOTP address assignment setting.

Specify the Zero Configuration Networking setting.

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address View or change the current WINS server address.

View or change the current DDNS setting.

View or change the current mDNS setting.

DNS Server Address View or change the current DNS server address.

Backup DNS Server Address View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

View or change the current HTTPS setting.

IPv6 menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > IPv6
  • Network/Ports > Network [x] > Network [x] Setup > IPv6
Show 19 more labels / short text on this page
Use To · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No · Enable HTTPS · Yes No
Page 150 of the Lexmark 675 user manual — Wireless menu
Page 150 · click to enlarge
Page 150

Understanding the printer menus 150

Enable IPv6 in the printer.

Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router.

View Hostname Set the host name.

Enable DHCPv6 in the printer.

Wireless menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Wireless
  • Network/Ports > Network [x] > Network [x] Setup > Wireless

Wi‑Fi Protected Setup (WPS)

Establish a wireless network connection and enable network security.

Start Push Button Method Start PIN Method

  • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time.
  • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.

Enable/Disable WPS Auto‑detection

Automatically detect the connection method that an access point with WPS uses—Start Push Button Method or Start PIN Method.

Network Mode BSS Type

Specify the network mode.

  • Infrastructure is the factory default setting. This lets the printer access a network using an access point.
  • Ad hoc configures a wireless connection directly between the printer and a computer.
Show 11 more labels / short text on this page
Use To · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off · Use To · Enable Disable · Infrastructure Ad hoc
Page 151 of the Lexmark 675 user manual — Standard USB menu
Page 151 · click to enlarge
Page 151

Understanding the printer menus 151

Specify the wireless standard for the wireless network.

802.11b/g 802.11b/g/n

Choose Network Select an available network for the printer to use.

View Signal Quality View the quality of the wireless connection.

View Security Mode View the encryption method for the wireless network.

AppleTalk menu

To access the menu, navigate to any of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network Setup [x] > AppleTalk

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

View Address Show the assigned AppleTalk address.

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.
Show 9 more labels / short text on this page
Use To · Compatibility · Use To · Activate · Yes No · Set Zone · Use To · PCL SmartSwitch · On Off
Page 152 of the Lexmark 675 user manual — AppleTalk menu
Page 152 · click to enlarge
Page 152

Understanding the printer menus 152

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.
Show 10 more labels / short text on this page
Use To · PS SmartSwitch · On Off · NPA Mode · On Off Auto · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto
Page 153 of the Lexmark 675 user manual — SMTP Setup menu
Page 153 · click to enlarge
Page 153

Understanding the printer menus 153

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

SMTP Setup menu

Primary SMTP Gateway Specify SMTP server gateway and port information.

Secondary SMTP Gateway Port

5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.

Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.

Set the printer to use SSL for increased security when connecting to the SMTP server.

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specify the type of user authentication required for scan to e‑mail privileges.

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Show 10 more labels / short text on this page
Use To · ENA Address · ENA Netmask · ENA Gateway · Use To · Secondary SMTP Gateway · SMTP Timeout · Use SSL · Disabled Negotiate Required · SMTP Server Authentication
Page 154 of the Lexmark 675 user manual — Miscellaneous Security Settings menu
Page 154 · click to enlarge
Page 154

Understanding the printer menus 154

Device‑Initiated E‑mail

Specify what credentials will be used when communicating to the SMTP server.

None Use Device SMTP Credentials

User‑Initiated E‑mail

  • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail.
  • “Device Userid” and “Device password” are used to log in to the SMTP server when Use Device SMTP Credentials is selected.

None Use Device SMTP Credentials Use Session User ID and Password Use Session E‑mail address and Password Prompt user

Security menu

Miscellaneous Security Settings menu

Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.

Login Failures Failure Time Frame Lockout Time Panel Login Timeout Remote Login Timeout

  • Login Failures specifies the number of failed login attempts before users are locked out. Settings range from 1–10. 3 attempts is the factory default setting.
  • Failure Time Frame specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1–60 minutes. 5 minutes is the factory default setting.
  • Lockout Time specifies how long users are locked out after exceeding the login failures limit. Settings range from 1–60 minutes. 5 minutes is the factory default setting. 1 indicates the scanner does not impose a lockout time.
  • Panel Login Timeout specifies how long the scanner remains idle on the home screen before automatically logging the user off. Settings range from 1–900 seconds. 30 seconds is the factory default setting.
  • Remote Login Timeout specifies how long a remote interface remains idle before automatically logging the user off. Settings range from 1–120 minutes. 10 minutes is the factory default setting.

1–16 Limit the digit length of the PIN.

Show 8 more labels / short text on this page
Use To · Device Userid · Device password · Kerberos 5 Realm · NTLM Domain · Use To · Login Restrictions · Minimum PIN Length
Page 155 of the Lexmark 675 user manual — Erase Temporary Data Files menu
Page 155 · click to enlarge
Page 155

Understanding the printer menus 155

Confidential Print menu

Limit the number of times an invalid PIN can be entered.

  • This menu appears only when a formatted, non-defective printer hard disk is installed.
  • Once the limit is reached, the print jobs for that user name and PIN are deleted.

Limit the amount of time a confidential print job stays in the printer before it is deleted.

Off 1 hour 4 hours 24 hours 1 week

  • If the “Confidential Job Expiration” setting is changed while confidential print jobs reside in the printer RAM or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in the printer RAM are deleted.

Set a time limit on how long the printer stores print jobs.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs needing verification.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs for printing at a later time.

Off 1 hour 4 hours 24 hours 1 week

Erase Temporary Data Files menu

Erase Temporary Data Files deletes only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Specify the mode for erasing temporary data files.

Show 10 more labels / short text on this page
Use To · Max Invalid PIN · Off 2–10 · Confidential Job Expiration · Repeat Job Expiration · Verify Job Expiration · Reserve Job Expiration · Use To · Wiping Mode · Auto
Page 156 of the Lexmark 675 user manual — Set Date and Time menu
Page 156 · click to enlarge
Page 156

Understanding the printer menus 156

Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Only automatic wiping enables users to erase temporary data files without having to turn off the printer for an extended amount of time.
  • Highly confidential information should be erased using only the Multiple pass method.

Security Audit Log menu

Export Log Let an authorized user export the audit log.

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • The audit log can be downloaded from the Embedded Web Server and saved on a computer.

Specify whether or not audit logs are deleted.

Specify how and whether or not audit logs are created.

Yes No Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time View the current date and time settings for the printer.

Manually Set Date and Time

Enter the date and time.

  • Manually setting the date and time sets Enable NTP to No.
  • The wizard lets you set the date and time in YYYY ‑ MM ‑ DD ‑ HH:MM format.
Show 9 more labels / short text on this page
Use To · Automatic Method · Use To · Delete Log · Yes No · Configure Log · Enable Audit · Use To · [input date/time]
Page 157 of the Lexmark 675 user manual — General Settings menu
Page 157 · click to enlarge
Page 157

Understanding the printer menus 157

Select the time zone.

[list of time zones]

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

  • On is the factory default setting.
  • This setting is turned off if you manually set the date and time.

Settings menu

General Settings menu

Set the language of the text appearing on the printer display.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Display the estimates of the supplies on the printer control panel, Web page, menu settings, and device statistics reports.

Show estimates Do not show estimates

Show 9 more labels / short text on this page
Use To · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off · Use To · Display Language · Show Supply Estimates
Page 158 of the Lexmark 675 user manual — Settings menu
Page 158 · click to enlarge
Page 158

Understanding the printer menus 158

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting. This resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.

Specify whether or not the ADF sounds a beep when paper is loaded.

Reduce the amount of noise produced by the printer.

  • Off is the factory default setting. This supports the performance specifications for your printer.
  • On configures the printer to produce as little noise as possible. This is best suited for printing text and line art.
  • Selecting Photo from the printer driver may disable Quiet Mode and provide better print quality and full ‑ speed printing.

Run the setup wizard.

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the country or region selection screen, the default becomes No.
Show 8 more labels / short text on this page
Use To · Eco-Mode · ADF Loaded Beep · Enabled Disabled · Quiet Mode · Off On · Run Initial setup · Yes No
Page 159 of the Lexmark 675 user manual — Settings menu
Page 159 · click to enlarge
Page 159

Understanding the printer menus 159

Specify a language and custom key information for the printer control panel keyboard. The additional tabs enable access to accent marks and symbols.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkish Czech Simplified Chinese Traditional Chinese Japanese Custom Key [x]

Specify the unit of measurement for paper sizes.

  • US is the factory default setting.
  • The initial setting is determined by your country or region selection in the initial setup wizard.

Scan to PC Port Range

Specify a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon.

Show 6 more labels / short text on this page
Use To · Keyboard · Keyboard Type · Paper Sizes · US Metric · [port range]
Page 160 of the Lexmark 675 user manual — Settings menu
Page 160 · click to enlarge
Page 160

Understanding the printer menus 160

Specify what is displayed on the upper left and right corners of the home screen.

Left side Right side Custom Text [x]

For the “Left side” and “Right side” options, select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.

Customize the displayed information for Black Toner and PC Kit.

Black Toner PC Kit

Select from the following options:

Do not display Display Message to display

  • “Do not display” is the factory default setting for “When to display.”
  • Default is the factory default setting for “Message to display.”
Show 7 more labels / short text on this page
Use To · Displayed Information · Displayed Information (continued) · When to display · Default Alternate Default · [text entry] Alternate · [text entry]
Page 161 of the Lexmark 675 user manual — Settings menu
Page 161 · click to enlarge
Page 161

Understanding the printer menus 161

Customize the displayed information for Paper Jam, Load Paper, and Service Errors.

Paper Jam Load Paper Service Errors

Select from the following options:

Yes No Message to display

  • No is the factory default setting for Display.
  • Default is the factory default setting for “Message to display.”

Change the icons and buttons that appear on the home screen.

Change Language Copy Copy shortcuts Fax Fax shortcuts E‑mail E‑mail shortcuts FTP FTP shortcuts Search held jobs Held jobs USB Drive Profiles and Apps Bookmarks Jobs by user Forms and Favorites Basic Card Copy Scan to Network My Shortcuts

For each icon or button, select from the following options:

Display Do not display

  • Display is the factory default setting for Copy, Fax, E ‑ mail, FTP, Search Held Jobs, Held jobs, USB Drive, Forms and Favorites, Basic Card Copy, Scan to Network, and My Shortcuts.
  • “Do not display” is the factory default setting for Change language, Copy shortcuts, Fax shortcuts, E ‑ mail shortcuts, FTP shortcuts, Profiles and Apps, Bookmarks, and Jobs by user.

Format the printer date.

MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD

  • MM-DD-YYYY is the U.S. factory default setting.
  • DD ‑ MM ‑ YYYY is the international factory default setting.
Show 8 more labels / short text on this page
Use To · Displayed Information (continued) · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization · Date Format
Page 162 of the Lexmark 675 user manual — Settings menu
Page 162 · click to enlarge
Page 162

Understanding the printer menus 162

Format the printer time.

12 hour A.M./P.M. 24 hour clock

20–100 Set the brightness of the printer display.

Set copies from the scanner to only one page at a time.

Specify whether icons and buttons have audio feedback.

  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Specify whether bookmarks are displayed from the Held Jobs area.

Specify whether image background removal is allowed in copy, fax, e‑mail, FTP, or scan‑to‑flash‑drive jobs.

Allow Custom Job Scans

Scan multiple jobs to one file.

Specify how a scan job should be reloaded if a paper jam occurs in the ADF.

Job Level page Level

Web Page Refresh Rate

30–300 Specify the number of seconds between Embedded Web Server refreshes.

Contact Name Specify a contact name for the printer.

Location Specify the location of the printer.

Show 14 more labels / short text on this page
Use To · Time Format · Screen Brightness · One Page Copy · Off On · Audio Feedback · Button Feedback · On Off Volume · Show Bookmarks · Yes No · Allow Background Removal · On Off · On Off · Scanner Jam recovery
Page 163 of the Lexmark 675 user manual — Settings menu
Page 163 · click to enlarge
Page 163

Understanding the printer menus 163

Set an alarm to sound when the printer requires user intervention. When activated, Alarm Control lets you set the number of times that the alarm sounds, while Cartridge Alarm lets you stop printing when a cartridge-low condition occurs. For each alarm type, select from the following options:

Alarm Control Cartridge Alarm

  • Single is the factory default setting for Alarm Control. This sounds three quick beeps.
  • Off is the factory default setting for Cartridge Alarm. This means no alarm will sound.
  • Continuous repeats three beeps every 10 seconds.

Specify the number of minutes of inactivity before the printer enters a lower power state.

Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state.

  • 30 is the factory default setting.
  • Disabled appears only when Energy Conserve is set to Off.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.

Set the amount of time the printer waits before it goes to Hibernate mode.

Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month

  • Disabled is the factory default setting for printers except in European Union countries and Switzerland.
  • “3 days” is the factory default setting for Class B printers in European Union countries and Switzerland.
Show 11 more labels / short text on this page
Use To · Alarms · Off Single Continuous · Timeouts · Standby Mode · Disabled 1–240 · Timeouts · Sleep Mode · Disabled 1–120 · Timeouts · Timeout
Page 164 of the Lexmark 675 user manual — Settings menu
Page 164 · click to enlarge
Page 164

Understanding the printer menus 164

Hibernate Timeout on Connection

Set the printer to hibernate mode even when there is an active Ethernet or fax connection.

Hibernate Do Not Hibernate

  • Do Not Hibernate is the factory default setting.
  • The fax function is available only in select printer models.

Set the amount of time in seconds the printer waits before returning the display to the Ready state.

Show a message that lets you reset the screen timeout timer instead of returning to the home screen.

Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job.

  • 90 is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the scanner checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This has no effect on PostScript emulation print jobs.

Set the amount of time in seconds the printer waits for additional data before canceling a print job.

  • 40 is the factory default setting.
  • Wait Timeout is available only when the scanner is using PostScript emulation. This has no effect on PCL emulation print jobs.

Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue.

  • 30 is the factory default setting.
  • This menu item appears only when a printer hard disk is installed.

Automatically reboot the printer.

Reboot when idle Reboot always Reboot never

Show 16 more labels / short text on this page
Use To · Timeouts · Screen Timeout · Timeouts · Prolong Screen Timeout · On Off · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535 · Timeouts · Job Hold Timeout · Error Recovery · Auto Reboot
Page 165 of the Lexmark 675 user manual — Settings menu
Page 165 · click to enlarge
Page 165

Understanding the printer menus 165

Determine the number of automatic reboots the printer can perform.

Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Set the printer to automatically check for jammed paper.

Let the printer successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do nothing Sleep Hibernate

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts to a long press of the Sleep button.

Do nothing Sleep Hibernate

Restore the printer settings to the factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. This keeps the user ‑ defined settings.
  • Restore Now returns all scanner settings to the factory default settings except Network/Ports menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in the printer hard disk are not affected.
Show 17 more labels / short text on this page
Use To · Error Recovery · Max Auto Reboots · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Jam Assist · On Off · Print Recovery · Page Protect · Off On · Press Sleep Button · Factory Defaults
Page 166 of the Lexmark 675 user manual — Copy Settings menu
Page 166 · click to enlarge
Page 166

Understanding the printer menus 166

Export the printer configuration package to a flash drive.

Copy Settings menu

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify whether an original document is two‑sided (duplex) or one‑sided, and then specify whether the copy should be two‑sided or one‑sided.

1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided

  • 1 sided to 1 sided —The original document has print on one side and the copy will also have print on one side.
  • 1 sided to 2 sided —The original document has print on one side, while the copy will have print on both sides.
  • 2 sided to 1 sided —The original document has print on both sides, while the copy will have print on just one side.
  • 2 sided to 2 sided —The original document has print on both sides, and the copy will also have print on both sides.

Copy two or four sheets of a document on one page.

Off 2‑up Portrait 4‑up Portrait 2‑up Landscape 4‑up Landscape

Specify whether or not a border is printed.

Show 10 more labels / short text on this page
Use To · Export Configuration Package · Export · Use To · Content Type · Content Source · Sides (Duplex) · Paper Saver · Print Page Borders · On Off
Page 167 of the Lexmark 675 user manual — Copy Settings menu
Page 167 · click to enlarge
Page 167

Understanding the printer menus 167

Keep the pages of a print job stacked in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Enable or disable the staple finisher.

  • Off is the factory default setting.
  • This menu item appears only when a staple finisher is installed.

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in. ID Card

  • Letter is the U.S. factory default setting.
  • A4 is the international factory default setting.

Specify the paper source for copy jobs.

Tray [x] Auto Size Match Multipurpose Feeder

Place a sheet of paper between transparencies.

Place a sheet of paper between pages, copies, or jobs.

Off Between Copies Between Jobs Between Pages

Specify the paper source for separator sheet.

Tray [x] Multipurpose Feeder

Show 10 more labels / short text on this page
Use To · Collate · Staple · Off On · Original Size · Copy To Source · Transparency Separators · On Off · Separator Sheets · Separator Sheet Source
Page 168 of the Lexmark 675 user manual — Copy Settings menu
Page 168 · click to enlarge
Page 168

Understanding the printer menus 168

1–9 Specify the level of darkness for the copy job.

1–999 Specify the number of copies for the copy job.

Specify the header or footer information and its location on the page.

For the location, select from the following options:

Off Date/Time Page number Custom text Print on

  • Top left
  • Top middle
  • Top right
  • Bottom left
  • Bottom middle
  • Bottom right

All pages First page only All but first page Custom text

  • Off is the factory default setting for the location.
  • “All pages” is the factory default setting for “Print on.”

Specify the overlay text printed on each page of the copy job.

Confidential Copy Draft Urgent Custom Off

Custom Overlay Specify the custom overlay text.

Allow interruption of a print job to copy a page or document.

Scan a document that contains mixed paper sizes into a single copy job.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Allow Save as Shortcut

Save custom copy settings as shortcuts.

Adjust the amount of background visible on a copy.

‑4 to 4

Show 12 more labels / short text on this page
Use To · Darkness · Number of Copies · Header/Footer · [Location] · Overlay · Allow priority copies · On Off · Custom Job scanning · On Off · On Off · Background Removal
Page 169 of the Lexmark 675 user manual — Copy Settings menu
Page 169 · click to enlarge
Page 169

Understanding the printer menus 169

Automatically align the content at the center of the page.

Specify which color to drop during scanning and to adjust the dropout setting for each color threshold.

None Red Green Blue Default Red Threshold

  • None is the factory default setting for Color Dropout.
  • 128 is the factory default setting for each color threshold.

0–255 Default Green Threshold

0–255 Default Blue Threshold

Specify the contrast used for the copy job.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a copy.

‑4 to 4

Correct slight skew in the scanned image.

Specify if the original document is scanned edge‑to‑edge prior to faxing.

Scan edge to edge

1–5 Adjust the amount of sharpness of a copy.

Create a sample copy of the original document.

Show 17 more labels / short text on this page
Use To · Auto Center · Off On · Color Dropout · Color Dropout · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Adjust ADF Skew · Auto Off On · Off On · Sharpness · Sample Copy · Off On
Page 170 of the Lexmark 675 user manual — Fax Mode (Analog Fax Setup) menu
Page 170 · click to enlarge
Page 170

Understanding the printer menus 170

Fax Settings menu

Fax Mode (Analog Fax Setup) menu

Analog Fax Setup mode sends the fax job through a telephone line.

Fax Name Specify the name of the fax in the printer.

Fax Number Specify the number assigned to the fax.

Specify how the fax is identified.

Fax Name Fax Number

Set the printer to fax manually, which requires a line splitter and a telephone handset.

  • Off is the factory default setting.
  • Use a regular telephone to answer an incoming fax job and to dial a fax number.
  • Press # 0 on the numeric keypad to go directly to the Manual Fax function.

Define the allocation of non-volatile memory between sending and receiving fax jobs.

All receive Mostly receive Equal Mostly send All send

  • Equal is the factory default setting. This splits the memory for sending and receiving fax jobs into equal amounts.
  • “Mostly send” specifies that most of the memory is set to send fax jobs.
  • “All send” specifies that all the memory is set to send fax jobs.
  • “All receive” specifies that all the memory is set to receive fax jobs.
  • “Mostly receive” specifies that most of the memory is set to receive fax jobs.

Specify whether or not the printer cancels fax jobs.

Specify the type of caller ID being used.

Specify the direction from where digits are masked in an outgoing fax number.

Off From left From right

  • Off is the factory default setting.
  • The number of characters masked is determined by the “Digits to mask” setting.

0–58 Specify the number of digits to mask in an outgoing fax number.

Show 11 more labels / short text on this page
Use To · Fax ID · Enable Manual Fax · On Off · Memory Use · Cancel Faxes · Allow Don't Allow · Caller ID · Off Primary Alternate · Fax number masking · Digits to Mask
Page 171 of the Lexmark 675 user manual — Fax Settings menu
Page 171 · click to enlarge
Page 171

Understanding the printer menus 171

Configure the fax cover page.

Off by default On by default Never use Always use Include to Field

  • “Off by default” is the factory default setting for Fax Cover Page.
  • Off is the factory default setting for all other menu items.

On Off Include from Field

On Off From Include Message Field

On Off Message Include Logo

On Off Include Footer [x]

On Off Footer [x]

Specify quality in dots per inch (dpi). A higher resolution gives better print quality, but increases the fax transmission time for outgoing faxes.

Standard Fine 200 dpi Super Fine 300 dpi Ultra Fine 600 dpi

Show 5 more labels / short text on this page
Use To · Fax Cover Page · Fax Cover Page · Use To · Resolution
Page 172 of the Lexmark 675 user manual — Fax Settings menu
Page 172 · click to enlarge
Page 172

Understanding the printer menus 172

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

Specify the page orientation of text and graphics.

Off Long edge Short edge

  • Off is the factory default setting.
  • Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

1–9 Lighten or darken the output.

Dial Prefix Enter a dialing prefix, such as 99. A numeric entry field is provided.

Show 6 more labels / short text on this page
Use To · Original Size · Sides (Duplex) · Content Type · Content Source · Darkness
Page 173 of the Lexmark 675 user manual — Fax Settings menu
Page 173 · click to enlarge
Page 173

Understanding the printer menus 173

Establish a dialing prefix rule.

0–9 Specify the number of times the printer tries to send the fax to a specified number.

1–200 Specify the number of minutes between redials.

Enable or disable switchboard blind dialing without a dial tone.

Enable or disable Error Correction Mode for fax jobs.

Fax files that are scanned at the printer.

Allow the printer driver to send fax jobs.

Allow Save as Shortcut

Save fax numbers as shortcuts in the printer.

Specify the dialing sound, either as a tone or as a pulse.

Specify the maximum speed in baud at which faxes are sent.

2400 4800 9600 14400 33600

Scan a document that contains mixed paper sizes into a single file.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Specify whether a preview will appear on the display for scan jobs.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.
Show 21 more labels / short text on this page
Use To · Dialing Prefix Rules · Prefix Rule [x] · Automatic Redial · Redial frequency · Behind a PABX · Yes No · Enable ECM · Yes No · Enable Fax Scans · On Off · Driver to fax · Yes No · On Off · Dial Mode · Tone Pulse · Max Speed · Custom Job scanning · On Off · Scan Preview · On Off
Page 174 of the Lexmark 675 user manual — Fax Settings menu
Page 174 · click to enlarge
Page 174

Understanding the printer menus 174

Adjust the amount of background visible on a scanned image.

‑4 to 4

Specify the contrast in the scanned image.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible.

‑4 to 4

Correct the slight skew in the scanned image.

  • Off is the factory default setting.
  • This menu item is supported only in select printer models.

Scan edge to edge

Specify if the original document is scanned edge-to‑edge prior to faxing.

1–5 Adjust the sharpness of a fax.

Specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Auto Convert Color Faxes to Mono Faxes

Convert all outgoing faxes to black and white.

Allow the printer to receive fax jobs.

Remove fax jobs from the print queue when the job requires specific unavailable resources.

None Toner Toner and Supplies

1–25 Specify the number of rings before answering an incoming fax job.

Show 19 more labels / short text on this page
Use To · Background Removal · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Adjust ADF Skew · Auto Off On · Off On · Sharpness · Temperature · On Off · Use To · Enable Fax Receive · On Off · Fax Job Waiting · Rings to Answer
Page 175 of the Lexmark 675 user manual — Fax Settings menu
Page 175 · click to enlarge
Page 175

Understanding the printer menus 175

Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source.

Specify the paper source for printing incoming fax jobs.

Auto Tray [x] Multipurpose Feeder

Enable two‑sided (duplex) printing for incoming fax jobs.

  • Off is the factory default setting.
  • This menu item appears only when a print duplexer is installed.

Enable the printer to include separator sheets for incoming fax jobs.

Off Before Job After Job

Specify where the printer will pick the separator sheet.

Tray [x] Multipurpose Feeder

Print the transmission information at the bottom of each page from a received fax.

Specify the maximum speed in baud at which faxes are received.

2400 4800 9600 14400 33600

Enable forwarding of received faxes to another recipient.

Print Print and Forward Forward

Specify the type of recipient to which faxes will be forwarded.

Fax E‑mail FTP LDSS eSF

  • Fax is the factory default setting.
  • This menu item is available only from the Embedded Web Server.

Forward to Shortcut Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF).

Show 13 more labels / short text on this page
Use To · Auto Reduction · On Off · Paper Source · Sides (Duplex) · Off On · Separator Sheets · Separator Sheet Source · Fax Footer · On Off · Max Speed · Fax Forwarding · Forward to
Page 176 of the Lexmark 675 user manual — Fax Settings menu
Page 176 · click to enlarge
Page 176

Understanding the printer menus 176

Block No Name Fax

Enable blocking of incoming faxes sent from devices with no station ID or fax ID specified.

Banned Fax List Enable the list of blocked fax numbers stored in the printer.

Enable printing of a transmission log after each fax job.

Print log Do not print log Print only for error

Enable printing of a receive error log following a receive error.

Print Never Print on Error

Enable automatic printing of fax logs.

  • On is the factory default setting.
  • Logs print after every 200 fax jobs.

Specify the source of the paper used for printing logs.

Tray [x] Multipurpose Feeder

Specify whether printed logs display the dialed number or the station name or fax name returned.

Remote Station Name Dialed Number

Enable access to the Fax Job log.

Enable access to the Fax Call log.

Specify the mode of the speaker.

Always Off On until Connected Always On

  • On until Connected is the factory default setting. A sound is issued until the fax connection is made.
  • Always On turns the speaker on.
  • Always Off turns the speaker off.

Control the volume setting.

Show 17 more labels / short text on this page
Use To · Off On · Use To · Transmission Log · Receive Error Log · Auto Print Logs · On Off · Log Paper Source · Logs Display · Enable Job Log · On Off · Enable Call Log · On Off · Use To · Speaker Mode · Speaker Volume · High Low
Page 177 of the Lexmark 675 user manual — 0–65535 KB
Page 177 · click to enlarge
Page 177

Understanding the printer menus 177

Control the fax speaker ringer volume.

All Rings Single Ring Only Double Ring Only Triple Ring Only Single or Double Rings Only Single or Triple Rings Only Double or Triple Rings Only

Specify ring patterns when the printer is answering calls.

E ‑ mail Settings menu

E‑mail Server Setup

Specify e‑mail server information.

Subject Message File Name

  • You can enter up to 255 characters in the Subject field.
  • You can enter up to 512 characters in the Message field.
  • You can enter up to 53 characters in the File Name field.

E‑mail Server Setup

Send a copy of the e-mail to the sender.

Send me a copy

Never appears On by default Off by default Always On

E‑mail Server Setup

Specify the maximum e-mail size in kilobytes.

Max E‑mail size

0–65535 KB

E‑mail Server Setup

Send a message when an e-mail is greater than the configured size limit.

E‑mail Server Setup

Specify a domain name, such as a company domain name, and then limit e‑mail destinations only to that domain name.

Show 7 more labels / short text on this page
Use To · Ringer Volume · Off On · Use To · Use To · Size Error Message · Limit destinations
Page 178 of the Lexmark 675 user manual — E-mail Settings menu
Page 178 · click to enlarge
Page 178

Understanding the printer menus 178

E‑mail Server Setup

Define the e‑mail server path name, for example: /directory/path.

Server Login Password Path File Name Web Link

  • The characters * : ? < > | are invalid entries for a path name.
  • You can enter up to 128 characters for Server, Login, Password, Path, and Web Link.
  • You can enter up to 53 characters for File Name.

Specify the format of the scanned file.

PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version of the PDF file that will be scanned for e‑mailing.

1.2–1.7 A–1a

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify whether copies are printed in color.

Specify the resolution of the scan in dots per inch.

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Show 10 more labels / short text on this page
Use To · Web Link Setup · Format · PDF Version · Content Type · Content Source · Color · Off On · Resolution · Darkness
Page 179 of the Lexmark 675 user manual — E-mail Settings menu
Page 179 · click to enlarge
Page 179

Understanding the printer menus 179

Specify the page orientation of the scanned image.

Specify the paper size of the document being scanned.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

  • Letter is the U.S. factory default setting.
  • A4 is the international factory default setting.

Specify the page orientation of text and graphics.

Off Long edge Short edge

  • Off is the factory default setting.
  • “Long edge” assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • “Short edge” assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Set the quality of a JPEG photo image in relation to file size and quality of the image.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size and quality of the image.
  • 90 provides the best image quality, but the file size is very large.
  • This menu item applies to all scan functions.

5–90 Set the quality of a text image in relation to file size and quality of the image.

5–90 Set the quality of a text or photo image in relation to file size and the quality of the image.

Show 8 more labels / short text on this page
Use To · Orientation · Portrait Landscape · Original Size · Sides (Duplex) · JPEG Quality · Text Default · Text/Photo Default
Page 180 of the Lexmark 675 user manual — E-mail Settings menu
Page 180 · click to enlarge
Page 180

Understanding the printer menus 180

5–90 Set the quality of a photo image in relation to file size and the quality of the image.

E‑mail images sent as

Specify how the images are sent.

Use Multi‑Page Tiff

Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑e-mail job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.

  • On is the factory default setting.
  • This menu item applies to all scan functions.

Specify whether or not the transmission log prints.

Print log Do not print log Print only for error

Specify the paper source for printing e-mail logs.

Tray [x] Multipurpose Feeder

E‑mail Bit Depth

Enable the Text/Photo mode to produce smaller file sizes by using 1‑bit images.

1 bit 8 bit

Copy a document that contains mixed paper sizes.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Specify whether or not a preview will appear on the display for scan jobs.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Allow Save as Shortcut

Save e-mail addresses as shortcuts.

  • On is the factory default setting.
  • When set to Off, the Save as Shortcut button does not appear on the e-mail Destination screen.

Adjust the amount of background visible on a scanned image.

‑4 to 4

Show 12 more labels / short text on this page
Use To · Photo Default · Attachment Web Link · On Off · Transmission Log · Log Paper Source · Custom Job scanning · On Off · Scan Preview · On Off · On Off · Background Removal
Page 181 of the Lexmark 675 user manual — E-mail Settings menu
Page 181 · click to enlarge
Page 181

Understanding the printer menus 181

Enable an equal balance of colors in the output.

Cyan‑Red Magenta-Green Yellow-Blue

Specify which color to drop during scanning and to adjust the dropout setting for each color threshold.

None Red Green Blue Default Red Threshold

  • None is the factory default setting for Color Dropout.
  • 128 is the factory default setting for each color threshold.

0–255 Default Green Threshold

0–255 Default Blue Threshold

Specify the contrast of the output.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Correct slight skew in the scanned image.

  • Auto is the factory default setting.
  • This menu item appears only in select printer models.

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

1–5 Adjust the amount of sharpness on a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default, while “warm” values generate a redder output than the default.

‑4 to 4

Show 15 more labels / short text on this page
Use To · Color Balance · Color Dropout · Color Dropout · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Adjust ADF Skew · Auto Off On · Off On · Sharpness · Temperature
Page 182 of the Lexmark 675 user manual — FTP Settings menu
Page 182 · click to enlarge
Page 182

Understanding the printer menus 182

Use cc:/bcc:

Enable the use of the cc and bcc fields.

FTP Settings menu

Specify the format of the file for FTP sending.

PDF (.pdf) Secure PDF (.pdf) TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version level of the PDF file for FTP sending.

1.2–1.7 A–1a

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify whether or not copies are printed in color.

Specify the quality of the scan in dots per inch (dpi).

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Show 11 more labels / short text on this page
Use To · Off On · Use To · Format · PDF Version · Content Type · Content Source · Color · Off On · Resolution · Darkness
Page 183 of the Lexmark 675 user manual — FTP Settings menu
Page 183 · click to enlarge
Page 183

Understanding the printer menus 183

Specify the page orientation of the scanned image.

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

  • Letter is the U.S. factory default setting.
  • A4 is the international factory default setting.

Specify the page orientation of text and graphics.

Off Long edge Short edge

  • Off is the factory default setting.
  • “Long edge” assumes binding along the long edge of the page (left edge for portrait and top edge for landscape ).
  • “Short edge” assumes binding along the short edge of the page (top edge for portrait and left edge for landscape ).

Set the quality of a JPEG photo image in relation to the file size and quality of the image.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.
  • This menu item applies to all scan functions.

5–90 Set the quality of the text in relation to the file size and quality of the image.

5–90 Set the quality of a text/photo image in relation to the file size and quality of the image.

Show 8 more labels / short text on this page
Use To · Orientation · Portrait Landscape · Original Size · Sides (Duplex) · JPEG Quality · Text Default · Text/Photo Default
Page 184 of the Lexmark 675 user manual — FTP Settings menu
Page 184 · click to enlarge
Page 184

Understanding the printer menus 184

5–90 Set the quality of a photo image in relation to the file size and quality of the image.

Use Multi‑Page TIFF

Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.

  • On is the factory default setting.
  • This menu item applies to all scan functions.

Specify whether the transmission log prints.

Print log Do not print log Print only for error

Specify a paper source when printing FTP logs.

Tray [x] Multipurpose Feeder

Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images.

1 bit 8 bit

File Name Type a base file name.

Copy a document that contains mixed paper sizes into a single scan job.

Specify whether a preview will appear on the display for scan jobs.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Allow Save as Shortcut

Enable shortcut creation for FTP addresses.

Adjust the amount of background visible on a copy.

‑4 to 4

Enable an equal balance of colors in the output.

Cyan‑Red Magenta‑Green Yellow‑Blue

Show 13 more labels / short text on this page
Use To · Photo Default · On Off · Transmission Log · Log Paper Source · FTP bit Depth · Custom Job Scanning · On Off · Scan Preview · On Off · On Off · Background Removal · Color Balance
Page 185 of the Lexmark 675 user manual — FTP Settings menu
Page 185 · click to enlarge
Page 185

Understanding the printer menus 185

Specify which color to drop during scanning, and how much the dropout is increased or decreased.

None Red Green Blue Default Red Threshold

  • None is the factory default setting for Color Dropout.
  • 128 is the factory default setting for each color threshold.

0–255 Default Green Threshold

0–255 Default Blue Threshold

Specify the contrast of the output.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Correct slight skew in the scanned image.

  • Auto is the factory default setting.
  • This menu item is supported only in select printer models.

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

1–5 Adjust the amount of sharpness of a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

Show 14 more labels / short text on this page
Use To · Color Dropout · Color Dropout · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Adjust ADF Skew · Auto Off On · Off On · Sharpness · Temperature
Page 186 of the Lexmark 675 user manual — Flash Drive menu
Page 186 · click to enlarge
Page 186

Understanding the printer menus 186

Flash Drive menu

Specify the format of the file to be sent through FTP.

PDF (.pdf) Secure PDF TIFF (.tif) JPEG (.jpg) XPS (.xps)

Set the version of the PDF file to be sent through FTP.

1.2–1.7 A–1a

Specify the content of the original document.

Text Graphics Text/Photo Photo

Specify how the original document was produced.

Black/White Laser Color Laser Inkjet Photo/Film Magazine Newspaper Press Other

Specify the resolution of the scan in dots per inch (dpi).

75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi

1–9 Lighten or darken the output.

Specify the orientation of the scanned image.

Show 9 more labels / short text on this page
Use To · Format · PDF Version · Content Type · Content Source · Resolution · Darkness · Orientation · Portrait Landscape
Page 187 of the Lexmark 675 user manual — Flash Drive menu
Page 187 · click to enlarge
Page 187

Understanding the printer menus 187

Specify the paper size of the original document.

Letter Legal Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes A4 A5 A6 JIS B5 Custom Scan Size [x] Book Original Business Card 3 x 5 in. 4 x 6 in.

Specify the page orientation of text and graphics.

Off Long edge Short edge

  • Off is the factory default setting.
  • “Long edge” assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • “Short edge” assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Set the quality of a JPEG photo image in relation to file size and quality.

Best for content 5–90

  • “Best for content” is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.
  • This menu setting applies to all scan functions.

5–90 Set the quality of the text in relation to file size and the quality of the image.

5–90 Set the quality of a text or photo image in relation to file size and quality.

5–90 Set the quality of a photo image in relation to file size and quality.

Show 7 more labels / short text on this page
Use To · Original Size · Sides (Duplex) · JPEG Quality · Text Default · Text/Photo Default · Photo Default
Page 188 of the Lexmark 675 user manual — Flash Drive menu
Page 188 · click to enlarge
Page 188

Understanding the printer menus 188

Use Multi‑Page TIFF

Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page.

  • On is the factory default setting.
  • This menu setting applies to all scan functions.

Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images.

1 bit 8 bit

File Name Type a base file name.

Copy a document containing mixed paper sizes in a single copy job.

Specify whether a preview appears on the display for scan jobs.

  • Off is the factory default setting.
  • This menu item appears only when a formatted, working printer hard disk is installed.

Adjust the amount of background visible on a copy.

‑4 to 4

Specify the contrast of the scanned image.

0–5 Best for content

Create a mirror image of the original document.

Create a negative image of the original document.

Adjust the amount of shadow detail visible on a scanned image.

‑4 to 4

Specify whether or not to fix slight skew on the scanned image.

  • Auto is the factory default setting.
  • This menu item appears only in select printer models.

Scan edge to edge

Specify whether the original document is scanned edge-to-edge.

Show 17 more labels / short text on this page
Use To · On Off · Scan Bit Depth · Custom Job Scanning · On Off · Scan Preview · On Off · Background Removal · Contrast · Mirror Image · Off On · Negative Image · Off On · Shadow Detail · Adjust ADF Skew · Auto Off On · Off On
Page 189 of the Lexmark 675 user manual — Flash Drive menu
Page 189 · click to enlarge
Page 189

Understanding the printer menus 189

1–5 Adjust the amount of sharpness on a scanned image.

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the default while “warm” values generate a redder output than the default.

‑4 to 4

1–999 Specify a default number of copies for each print job.

Set a default paper source for all print jobs.

Tray [x] Multipurpose Feeder Manual Paper Manual Envelope

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether prints are on one side or on both sides of the page.

1 sided 2 sided

Define binding for duplexed pages in relation to the page orientation of the printed document.

Long Edge Short Edge

  • Long Edge is the factory default setting. This assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify the orientation of a multiple‑page document.

Specify that multiple‑page images be printed on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Print a border on each page image.

Show 13 more labels / short text on this page
Use To · Sharpness · Temperature · Copies · Paper Source · Collate · Sides (Duplex) · Duplex Binding · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver · Paper Saver Border · None Solid
Page 190 of the Lexmark 675 user manual — Setup menu
Page 190 · click to enlarge
Page 190

Understanding the printer menus 190

Specify the positioning of multiple‑page images.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or in landscape orientation.

Specify whether blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or when inserting blank pages in a document .

Specify the paper source for separator sheets.

Tray [x] Multipurpose Feeder

Specify whether blank pages are inserted in a print job.

Do Not Print Print

Print Settings

Setup menu

Set the printer language.

PCL Emulation PS Emulation

  • PCL Emulation is the factory default setting.
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Specify that print jobs be removed from the print queue if they require unavailable printer options or custom settings.

Print jobs removed from the print queue are stored in a separate print queue, so other jobs print normally. When the missing information or options are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu setting appears only when a formatted, working printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.
Show 8 more labels / short text on this page
Paper Saver Ordering · Separator Sheets · Separator Sheet Source · Blank Pages · Use To · Printer Language · Job Waiting · On Off
Page 191 of the Lexmark 675 user manual — Print Settings
Page 191 · click to enlarge
Page 191

Understanding the printer menus 191

Set the logical and physical printable area.

  • Normal is the factory default setting. When attempting to print data in the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary. This affects only pages printed using a PCL 5e interpreter. This has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

  • RAM is the factory default setting. Storing downloads in the RAM is temporary.
  • Storing downloads in flash memory or on a printer hard disk places them in permanent storage. Downloads remain in flash memory or on the printer hard disk even when the printer is turned off.
  • This menu setting appears only when a formatted, working flash drive or printer hard disk is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a job that requires more memory than is available.

  • Off is the factory default setting. This sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On retains the downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears, and downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All is selected.

Alphabetical Oldest First Newest First

Show 8 more labels / short text on this page
Use To · Print Area · Normal Whole Page · Download Target · RAM Flash Disk · Resource Save · On Off · Print All Order
Page 192 of the Lexmark 675 user manual — Finishing menu
Page 192 · click to enlarge
Page 192

Understanding the printer menus 192

Finishing menu

Specify whether two‑sided (duplex) printing is set as the user default setting for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the software program. For Windows users:

Click File > Print, and then click Properties, Preferences, Options, or Setup. For Macintosh users:

Choose File > Print, and then adjust the settings from the print dialog and pop‑up menus.

Define the way two‑sided pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting. This assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

Specify whether or not blank pages are inserted in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether or not blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specify the paper source for separator sheets.

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for Manual Feeder to appear as a menu setting.
Show 8 more labels / short text on this page
Use To · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Separator Source
Page 193 of the Lexmark 675 user manual — Quality menu
Page 193 · click to enlarge
Page 193

Understanding the printer menus 193

Print multiple pages on one sheet of paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • When the number of pages per sheet is selected, each page is scaled so that the number of pages you want can be displayed on the sheet.

Specify the order in which pages are printed on a single sheet when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of pages and whether they are in portrait or landscape orientation.

Specify the orientation in which pages are printed on a single sheet.

Print a border when using Paper Saver.

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions Isolated

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
Show 11 more labels / short text on this page
Use To · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Use To · Print Resolution · Pixel Boost · Toner Darkness
Page 194 of the Lexmark 675 user manual — Job Accounting menu
Page 194 · click to enlarge
Page 194

Understanding the printer menus 194

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • You can set this option from the printer software. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the Print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

Job Accounting menu

Determine and set if the printer creates a log of the print jobs it receives.

Job Accounting Utilities Print and delete log files or export them to a flash drive.

Determine and set how often a log file is created.

Log Action at End of Frequency

Determine and set how the printer responds when the frequency threshold expires.

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Disk Near Full Level

Specify the maximum size of the log file before the printer executes the Disk Near Full Action.

Show 13 more labels / short text on this page
Use To · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Job Accounting Log · Off On · Accounting Log Frequency · Weekly Monthly · Off 1–99
Page 195 of the Lexmark 675 user manual — Utilities menu
Page 195 · click to enlarge
Page 195

Understanding the printer menus 195

Disk Near Full Action

Determine and set how the printer responds when the printer hard disk is nearly full.

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Disk Near Full Level determines when this action is triggered.

Determine and set how the printer responds when disk usage reaches the maximum limit (100MB).

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Determine and set where the printer posts job accounting logs.

E‑mail Address to Send Logs Specify the e‑mail address to which the device sends job accounting logs.

Log File Prefix Specify the prefix you want for the log file name.

Utilities menu

Delete confidential and held jobs from the printer hard disk.

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
  • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory.
Show 4 more labels / short text on this page
Use To · Disk Full Action · Use To · Remove Held Jobs
Page 196 of the Lexmark 675 user manual — PDF menu
Page 196 · click to enlarge
Page 196

Understanding the printer menus 196

Format the flash memory.

  • Yes deletes all data stored in flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a non ‑ defective flash memory card is installed.

Delete Downloads on Disk

Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs.

Delete Now Do Not Delete

  • Delete Now sets the printer to delete the downloads and allows the display to return to the originating screen after the deletion.
  • Do Not Delete sets the printer display to return to the main Utilities menu for touch ‑ screen printer models. When selected in non ‑ touch ‑ screen printer models, Do Not Delete sets the printer to return to the originating screen after the deletion.

Activate Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off or reset the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

XPS menu

Print a page containing information on errors, including XML markup errors.

PDF menu

Scale page content to fit the selected paper size.

Show 11 more labels / short text on this page
Use To · Format Flash · Yes No · Coverage Estimator · Off On · Use To · Print Error Pages · Off On · Use To · Scale to Fit · Yes No
Page 197 of the Lexmark 675 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 197 · click to enlarge
Page 197

Understanding the printer menus 197

Print annotations in a PDF.

Do Not Print Print

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Disable the SysStart file.

Establish the font search order.

  • Resident is the factory default setting.
  • This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.
  • Make sure the flash memory option or printer hard disk is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.

PCL Emul menu

Specify the set of fonts used in the Font Name menu.

  • “Resident” is the factory default setting. It shows the factory default set of fonts downloaded in the RAM.
  • “Download” shows all the fonts downloaded in the RAM.
  • “All” shows all fonts available to any option.

Identify a specific font and where it is stored.

Specify the symbol set for each font name.

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetical and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs, such as math symbols for scientific text. Only the supported symbol sets are shown.
Show 14 more labels / short text on this page
Use To · Annotations · Use To · Print PS Error · On Off · On Off · Font Priority · Resident Flash/Disk · Use To · Font Source · Resident Download All · Font Name · Courier 10 · Symbol Set
Page 198 of the Lexmark 675 user manual — PostScript menu
Page 198 · click to enlarge
Page 198

Understanding the printer menus 198

Change the point size for scalable typographic fonts.

1.00–1008.00

  • 12 is the factory default setting.
  • Point size refers to the height of the characters in the font. One point equals approximately 0.014 of an inch. This can be increased or decreased in 0.25 ‑ point increments.

Specify the font pitch for scalable monospaced fonts.

0.08–100.00

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi). This can be increased or decreased in 0.01 ‑ cpi increments.
  • For non ‑ scalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specify the orientation of text and graphics on a page.

  • Portrait is the factory default setting. It prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the paper size and orientation before setting Lines per Page.

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow the printing of eighty 10 ‑ pitch characters.

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Show 16 more labels / short text on this page
Use To · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off
Page 199 of the Lexmark 675 user manual — PostScript menu
Page 199 · click to enlarge
Page 199

Understanding the printer menus 199

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • “Off” is the factory default setting.
  • “None” ignores the Select Paper Feed command. This option appears only when it is selected by the PCL 5e interpreter.
  • “0–199” allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Envelope

Show the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Restore all tray and feeder assignments to the factory default settings.

Show 9 more labels / short text on this page
Use To · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults · Tray Renumber · Restore Defaults · Yes No
Page 200 of the Lexmark 675 user manual — HTML menu
Page 200 · click to enlarge
Page 200

Understanding the printer menus 200

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKO

Set the default font for HTML documents.

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

1–255 pt Set the default font size for HTML documents.

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.

1–400% Scale the default font for HTML documents.

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Set the page orientation for HTML documents.

Show 7 more labels / short text on this page
Use To · Font Name · Use To · Font Size · Scale · Orientation · Portrait Landscape
Page 201 of the Lexmark 675 user manual — Help menu
Page 201 · click to enlarge
Page 201

Understanding the printer menus 201

8–255 mm Set the page margin for HTML documents.

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.

Specify whether to print backgrounds on HTML documents.

Do Not Print Print

Image menu

Select the optimal paper size, scaling, and orientation.

Invert bitonal monochrome images.

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scale the image to fit the selected paper size.

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Set the image orientation.

Portrait Landscape Reverse Portrait Reverse Landscape

Help menu

The Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDF files. They contain information about using the printer and performing various tasks, including copying, scanning, and faxing.

English, French, German, and Spanish translations are stored in the printer. Other translations are available at http://support.lexmark.com.

Print All Guides Prints all the guides

Copy Guide Provides information about making copies and changing settings

Show 11 more labels / short text on this page
Use To · Margin Size · Backgrounds · Use To · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Menu item Description
Page 202 of the Lexmark 675 user manual — Image menu
Page 202 · click to enlarge
Page 202

Understanding the printer menus 202

E‑mail Guide Provides information about sending e‑mails using addresses, shortcut numbers, or the address book, and about changing settings

Fax Guide Provides information about sending faxes using fax numbers, shortcut numbers, or the address book, and about changing settings

FTP Guide Provides information about scanning documents directly to an FTP server using an FTP address, shortcut numbers, or the address book, and about changing settings

Print Defects Guide Provides help in resolving repeating defects in copies or prints

Information Guide Provides help in locating additional information

Supplies Guide Provides part numbers for ordering supplies

Menu item Description

Page 203 of the Lexmark 675 user manual — Check your first draft for accuracy
Page 203 · click to enlarge
Page 203

Saving money and the environment 203

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see "Using Eco-Mode" in “General Settings menu” on page 157.

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser/LED printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 72.

Conserving supplies

Use both sides of the paper

If your printer model supports duplex printing, then you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or from the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or from the Lexmark Toolbar to see how the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.
Page 204 of the Lexmark 675 user manual — Reducing printer noise
Page 204 · click to enlarge
Page 204

Saving money and the environment 204

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 226.

Saving energy

Using Eco ‑ Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode > select a setting

Off Use the factory default settings for all settings associated with Eco‑Mode. Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until it is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.

Energy/Paper Use all the settings associated with Energy and Paper modes.

  • Plain Paper
  • Enable the automatic two ‑ sided (duplex) feature.
  • Turn off print log features.

3 Click Submit.

Reducing printer noise

Enable Quiet Mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode > select a setting

Use To

Page 205 of the Lexmark 675 user manual — Using the printer control panel
Page 205 · click to enlarge
Page 205

Saving money and the environment 205

On Reduce printer noise.

  • Print jobs are processed at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.

Off Use factory default settings.

3 Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep mode.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep mode.

Use To · 3 Touch

Page 206 of the Lexmark 675 user manual — Using the Embedded Web Server
Page 206 · click to enlarge
Page 206

Saving money and the environment 206

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, the printer is essentially off, and all other systems and devices are powered down safely.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings

2 Touch Press Sleep Button or Press and Hold Sleep Button.

3 Touch Hibernate >

Adjusting the brightness of the display

To save energy, or if you are have trouble reading your display, adjust the brightness of the display.

Available settings range from 20–100. The factory default setting is 100.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Page 207 of the Lexmark 675 user manual — Returning Lexmark cartridges for reuse or recycling
Page 207 · click to enlarge
Page 207

Saving money and the environment 207

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Screen Brightness

2 In the Screen Brightness field, enter the brightness percentage you want for the display.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

3 Touch

Page 208 of the Lexmark 675 user manual — Recycling
Page 208 · click to enlarge
Page 208

Saving money and the environment 208

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 209 of the Lexmark 675 user manual — Erasing volatile memory
Page 209 · click to enlarge
Page 209

Securing the printer 209

Securing the printer

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Types of memory Description

Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, scanner and bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex scan, print, copy, and fax jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Page 210 of the Lexmark 675 user manual — Using the printer control panel
Page 210 · click to enlarge
Page 210

Securing the printer 210

Erasing non ‑ volatile memory

  • Individual settings, device and network settings, security settings, and embedded solutions —Erase information and settings by selecting Wipe All Settings in the Configuration menu.
  • Fax data —Erase fax settings and data by selecting Wipe All Settings in the Configuration menu.

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully powered up, the touch screen displays a list of functions, instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer will restart several times during this process.

4 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

  • Some printer models may not have a printer hard disk installed.
  • Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, the touch screen displays a list of functions.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
Page 211 of the Lexmark 675 user manual — Using the printer control panel
Page 211 · click to enlarge
Page 211

Securing the printer 211

  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
Page 212 of the Lexmark 675 user manual — Finding printer security information
Page 212 · click to enlarge
Page 212

Securing the printer 212

  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information:

1 Go to www.lexmark.com, and then navigate to Support & Downloads > select your printer.

2 Click the Manuals tab, and then select Embedded Web Server — Security: Administrator’s Guide.

Page 213 of the Lexmark 675 user manual — Cleaning the printer
Page 213 · click to enlarge
Page 213

Maintaining the printer 213

Maintaining the printer

Cleaning the printer parts

Cleaning the printer

1 Make sure that the printer is turned off and unplugged from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.

5 Make sure all areas of the printer are dry before sending a new print job.

Page 214 of the Lexmark 675 user manual — Cleaning the scanner glass
Page 214 · click to enlarge
Page 214

Maintaining the printer 214

Cleaning the scanner glass

Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.

1 Slightly dampen a soft, lint-free cloth or paper towel with water.

2 Open the scanner cover.

3 Clean all the areas shown, and then let them dry.

Lexmark 675 — Cleaning the scanner glass diagram (page 214)
Fig. 109 · Cleaning the scanner glass

1 White underside of the scanner cover

4 White underside of the ADF cover

4 Close the scanner cover.

2 Scanner glass · 3 ADF glass

Page 215 of the Lexmark 675 user manual — Using genuine Lexmark parts and supplies
Page 215 · click to enlarge
Page 215

Maintaining the printer 215

Checking the status of parts and supplies

Checking the status of parts and supplies on the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, initial estimates assume future supplies consumption based on the International Organization for Standardization* test methods and page content.

* Average continuous black declared cartridge yield in accordance with ISO/IEC 19752.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Page 216 of the Lexmark 675 user manual — Ordering toner cartridges
Page 216 · click to enlarge
Page 216

Maintaining the printer 216

Ordering toner cartridges

  • Estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.
Lexmark 675 — Ordering toner cartridges diagram (page 216)
Fig. 110 · Ordering toner cartridges

For the European Union, European Economic Area, and Switzerland

For the Asia Pacific region (includes Australia and New Zealand)

For Africa, Middle East, Central Eastern Europe, and Commonwealth of Independent States

For more information on countries located in each region, visit www.lexmark.com/regions.

* This toner cartridge is supported only in MX510de, MX511de, and MX511dhe printer models.

1 This toner cartridge is supported only in MX410de printer model.

2 This toner cartridge is supported only in MX510de, MX511de, and MX511dhe printer models.

Page 217 of the Lexmark 675 user manual — Storing supplies
Page 217 · click to enlarge
Page 217

Maintaining the printer 217

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner from toner cartridge.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 500Z 500ZA

Ordering a maintenance kit

  • Using certain types of paper may require more frequent replacement of the maintenance kit.
  • The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance kit and can be individually ordered and replaced if necessary.
  • Contact your service representative to replace the maintenance kit.

Maintenance kit Part number

100‑V maintenance kit* 40X9146

110‑V maintenance kit 40X9135

220‑V maintenance kit 40X9136

* This is available only in Japan.

Ordering an ADF separator roller

Order an ADF separator roller when the ADF fails to pick paper or picks more than one sheet of paper at a time.

For information on replacing the ADF separator roller, see the instruction sheet that came with the part.

Part name Part number

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Separator roller 40X9108

Page 218 of the Lexmark 675 user manual — Replacing the toner cartridge
Page 218 · click to enlarge
Page 218

Maintaining the printer 218

Replacing supplies

Replacing the toner cartridge

1 Press the button on the right side of the printer, and then open the front door.

Lexmark 675 — Replacing the toner cartridge diagram (page 218)
Fig. 111 · Replacing the toner cartridge

2 Pull the toner cartridge out using the handle.

Lexmark 675 — Replacing the toner cartridge diagram (page 218)
Fig. 112 · Replacing the toner cartridge

3 Unpack the toner cartridge, and then remove all packing materials.

4 Shake the new cartridge to redistribute the toner.

Lexmark 675 — Replacing the toner cartridge diagram (page 218)
Fig. 113 · Replacing the toner cartridge
Page 219 of the Lexmark 675 user manual — Replacing the imaging unit
Page 219 · click to enlarge
Page 219

Maintaining the printer 219

5 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Lexmark 675 — Replacing the imaging unit diagram (page 219)
Fig. 114 · Replacing the imaging unit
Lexmark 675 — Replacing the imaging unit diagram (page 219)
Fig. 115 · Replacing the imaging unit

6 Close the front door.

Replacing the imaging unit

1 Press the button on the right side of the printer, and then open the front door.

Page 220 of the Lexmark 675 user manual — Replacing the imaging unit
Page 220 · click to enlarge
Page 220

Maintaining the printer 220

2 Pull the toner cartridge out using the handle.

3 Lift the green handle, and then pull the imaging unit out of the printer.

Lexmark 675 — Replacing the imaging unit diagram (page 220)
Fig. 116 · Replacing the imaging unit

4 Unpack the new imaging unit, and then shake it.

Lexmark 675 — Replacing the imaging unit diagram (page 220)
Fig. 117 · Replacing the imaging unit

5 Remove all packing materials from the imaging unit.

Page 221 of the Lexmark 675 user manual — Replacing the imaging unit
Page 221 · click to enlarge
Page 221

Maintaining the printer 221

Lexmark 675 — Replacing the imaging unit diagram (page 221)
Fig. 118 · Replacing the imaging unit

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark 675 — Replacing the imaging unit diagram (page 221)
Fig. 119 · Replacing the imaging unit

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Lexmark 675 — Replacing the imaging unit diagram (page 221)
Fig. 120 · Replacing the imaging unit

8 Close the front door.

Page 222 of the Lexmark 675 user manual — Shipping the printer
Page 222 · click to enlarge
Page 222

Maintaining the printer 222

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.
Lexmark 675 — Before moving the printer diagram (page 222)
Fig. 121 · Before moving the printer
Lexmark 675 — Before moving the printer diagram (page 222)
Fig. 122 · Before moving the printer
  • Use the handholds located on both sides of the printer to lift it.
  • Make sure your fingers are not under the printer when you set it down.
  • Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 223 of the Lexmark 675 user manual — Viewing reports
Page 223 · click to enlarge
Page 223

Managing the printer 223

Managing the printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears at the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Setting up e ‑ mail alerts

Configure the printer to send you e‑mail alerts when the supplies are getting low or when the paper needs to be changed or added, or when there is a paper jam.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings.

3 From the Other Settings menu, click E‑mail Alert Setup.

4 Select the items you want to be notified on, and then type the e‑mail addresses.

5 Click Submit.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, network, and supplies.

1 Open a Web browser, and then type the printer IP address in the address field.

Page 224 of the Lexmark 675 user manual — Configuring supply notifications from the Embedded Web Server
Page 224 · click to enlarge
Page 224

Managing the printer 224

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Reports, and then click the type of report you want to view.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Notification Description

Page 225 of the Lexmark 675 user manual — Restoring factory default settings
Page 225 · click to enlarge
Page 225

Managing the printer 225

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 56.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 210.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now >

Page 226 of the Lexmark 675 user manual — Load paper properly
Page 226 · click to enlarge
Page 226

Clearing jams

By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. If jams occur, then follow the steps outlined in this chapter.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.

Correct loading of paper Incorrect loading of paper

Lexmark 675 — Load paper properly diagram (page 226)
Fig. 123 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.

Clearing jams 226

Page 227 of the Lexmark 675 user manual — Understanding jam messages and locations
Page 227 · click to enlarge
Page 227
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark 675 — Understanding jam messages and locations diagram (page 227)
Fig. 124 · Understanding jam messages and locations
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
Lexmark 675 — Use recommended paper diagram (page 227)
Fig. 125 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the computer or printer control panel.
  • Store paper according to manufacturer recommendations.

Understanding jam messages and locations

When a jam occurs, a message indicating the jam location and information to clear the jam appears on the printer display. Open the doors, covers, and trays indicated on the display to remove the jam.

Clearing jams 227

Page 228 of the Lexmark 675 user manual — Understanding jam messages and locations
Page 228 · click to enlarge
Page 228
  • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will reprint.
Lexmark 675 — Understanding jam messages and locations diagram (page 228)
Fig. 126 · Understanding jam messages and locations
Lexmark 675 — Understanding jam messages and locations diagram (page 228)
Fig. 127 · Understanding jam messages and locations

Jam access area Printer control panel message What to do

[x]‑page jam, open automatic feeder top cover. [28y.xx]

1 Automatic document feeder (ADF)

Remove all paper from the ADF tray, and then remove the jammed paper.

2 Standard bin [x]‑page jam, clear standard bin. [20y.xx]

Remove the jammed paper.

3 Front door [x]‑page jam, open front door. [20y.xx]

Open the front door, then remove the toner cartridge and imaging unit, and then the jammed paper.

4 Multipurpose feeder [x]‑page jam, clear manual feeder. [250.xx]

Remove all paper from the multipurpose feeder, and then remove the jammed paper.

5 Tray 1 [x]‑page jam, remove tray 1 to clear duplex. [23y.xx]

Pull out tray 1 completely, then push the front duplex flap down, and then remove the jammed paper.

6 Tray [x] [x]‑page jam, remove tray [x]. [24y.xx]

Pull out the indicated tray, and then remove the jammed paper.

7 Rear door [x]‑page jam, open rear door. [20y.xx]

Open the rear door, and then remove the jammed paper.

Clearing jams 228

Page 229 of the Lexmark 675 user manual — [x] ‑ page jam, open front door. [20y.xx]
Page 229 · click to enlarge
Page 229

[x] ‑ page jam, open front door. [20y.xx]

1 Press the button on the right side of the printer, and then open the front door.

2 Pull the toner cartridge out using the handle.

Clearing jams 229

Page 230 of the Lexmark 675 user manual — [x]-page jam, open front door. [20y.xx]
Page 230 · click to enlarge
Page 230

3 Lift the green handle, and then pull the imaging unit out of the printer.

Lexmark 675 — [x]-page jam, open front door. [20y.xx] diagram (page 230)
Fig. 128 · [x]-page jam, open front door. [20y.xx]

4 Place the imaging unit aside on a flat, smooth surface.

5 Lift the green flap in front of the printer.

Lexmark 675 — [x]-page jam, open front door. [20y.xx] diagram (page 230)
Fig. 129 · [x]-page jam, open front door. [20y.xx]

6 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 230

Page 231 of the Lexmark 675 user manual — [x]-page jam, open front door. [20y.xx]
Page 231 · click to enlarge
Page 231
Lexmark 675 — [x]-page jam, open front door. [20y.xx] diagram (page 231)
Fig. 130 · [x]-page jam, open front door. [20y.xx]

7 Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside the printer, and then insert the imaging unit into the printer.

8 Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer, and then insert the cartridge into the printer.

Clearing jams 231

Page 232 of the Lexmark 675 user manual — [x] ‑ page jam, open rear door. [20y.xx]
Page 232 · click to enlarge
Page 232

9 Close the front door.

10 From the printer control panel, touch

to clear the message and continue printing. For non‑touch‑screen printer

models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open rear door. [20y.xx]

1 Open the front door to loosen the jammed paper in the rear door.

2 Gently pull down the rear door.

Lexmark 675 — [x] ‑ page jam, open rear door. [20y.xx] diagram (page 232)
Fig. 131 · [x] ‑ page jam, open rear door. [20y.xx]

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 232

Page 233 of the Lexmark 675 user manual — [x] ‑ page jam, clear standard bin. [20y.xx]
Page 233 · click to enlarge
Page 233

4 Close the rear door, and then the front door.

5 From the printer control panel, touch

to clear the message and continue printing. For non‑touch‑screen printer

models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, clear standard bin. [20y.xx]

1 Firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark 675 — [x] ‑ page jam, clear standard bin. [20y.xx] diagram (page 233)
Fig. 132 · [x] ‑ page jam, clear standard bin. [20y.xx]

2 From the printer control panel, touch

to clear the message and continue printing. For non‑touch‑screen printer

models, select Next > > Clear the jam, press OK > .

Clearing jams 233

Page 234 of the Lexmark 675 user manual — [x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx]
Page 234 · click to enlarge
Page 234

[x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx]

1 Pull the tray completely out of the printer.

Lexmark 675 — [x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 234)
Fig. 133 · [x] ‑ page jam, remove tray 1 to clear duplex. [23y.…

2 Locate the blue lever, and then pull it down to release the jam.

Lexmark 675 — [x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 234)
Fig. 134 · [x] ‑ page jam, remove tray 1 to clear duplex. [23y.…
Lexmark 675 — [x] ‑ page jam, remove tray 1 to clear duplex. [23y.xx] diagram (page 234)
Fig. 135 · [x] ‑ page jam, remove tray 1 to clear duplex. [23y.…

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 234

Page 235 of the Lexmark 675 user manual — [x] ‑ page jam, open tray [x]. [24y.xx]
Page 235 · click to enlarge
Page 235
Lexmark 675 — [x]-page jam, open tray [x]. [24y.xx] diagram (page 235)
Fig. 136 · [x]-page jam, open tray [x]. [24y.xx]

4 Insert the tray.

to clear the message and continue printing. For non‑touch‑screen printer

5 From the printer control panel, touch

models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open tray [x]. [24y.xx]

1 Pull the tray completely out of the printer.

2 Firmly grasp the jammed paper on each side, and then gently pull it out.

Clearing jams 235

Page 236 of the Lexmark 675 user manual — [x] ‑ page jam, clear manual feeder. [25y.xx]
Page 236 · click to enlarge
Page 236
Lexmark 675 — [x]-page jam, clear manual feeder. [25y.xx] diagram (page 236)
Fig. 137 · [x]-page jam, clear manual feeder. [25y.xx]

3 Insert the tray.

to clear the message and continue printing. For non‑touch‑screen printer

4 From the printer control panel, touch

models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, clear manual feeder. [25y.xx]

1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

Lexmark 675 — [x] ‑ page jam, clear manual feeder. [25y.xx] diagram (page 236)
Fig. 138 · [x] ‑ page jam, clear manual feeder. [25y.xx]

2 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 675 — [x] ‑ page jam, clear manual feeder. [25y.xx] diagram (page 236)
Fig. 139 · [x] ‑ page jam, clear manual feeder. [25y.xx]

Clearing jams 236

Page 237 of the Lexmark 675 user manual — [x] ‑ page jam, open automatic feeder top cover. [28y.xx]
Page 237 · click to enlarge
Page 237

3 Reload paper into the multipurpose feeder.

to clear the message and continue printing. For non‑touch‑screen printer

4 From the printer control panel, touch

models, select Next > > Clear the jam, press OK > .

[x] ‑ page jam, open automatic feeder top cover. [28y.xx]

1 Remove all original documents from the ADF tray.

2 Open the ADF cover.

Lexmark 675 — [x] ‑ page jam, open automatic feeder top cover. [28y.xx] diagram (page 237)
Fig. 140 · [x] ‑ page jam, open automatic feeder top cover. [28…

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

4 Close the ADF cover.

Clearing jams 237

Page 238 of the Lexmark 675 user manual — [x]-page jam, open automatic feeder top cover. [28y.xx]
Page 238 · click to enlarge
Page 238

5 Straighten the edges of the original documents, then load the original documents into the ADF, and then adjust the paper guide.

6 From the printer control panel, touch

to clear the message and continue printing. For non‑touch‑screen printer

models, select Next > > Clear the jam, press OK > .

Clearing jams 238

Page 239 of the Lexmark 675 user manual — Change [paper source] to [custom type name] load [orientation]
Page 239 · click to enlarge
Page 239

Troubleshooting

Understanding printer messages

Cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, select Continue on the printer control panel to clear the message

and continue printing. For non‑touch‑screen printer models, press to confirm.

Cartridge nearly low [88.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Change [paper source] to [custom string] load [paper orientation]

Try one or more of the following:

  • Load the correct size and type of paper in the tray, then verify that the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer

models, press to confirm. • Cancel the print job.

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Troubleshooting 239

Page 240 of the Lexmark 675 user manual — Configuration change, some held jobs were not restored [57]
Page 240 · click to enlarge
Page 240

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For non ‑ touch ‑ screen printer models,

press to confirm. • Cancel the print job.

Close flatbed cover and load originals if restarting job [2yy.xx]

From the printer control panel, try one or more of the following:

  • Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Select Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job.
  • Select Finish job without further scanning to end the last successful scan job.
  • For non ‑ touch ‑ screen printer models, press to confirm.

Close front door

Close the front door of the printer.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

  • The printer firmware has been updated.
  • The tray for the print job is removed.
  • The print job is sent from a flash drive that is no longer attached to the USB port.
  • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

Troubleshooting 240

Page 241 of the Lexmark 675 user manual — Fax memory full
Page 241 · click to enlarge
Page 241

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Complex page, some data may not have printed [39]

Try one or more of the following:

  • From the printer control panel, select Continue to ignore the message and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm.

  • Cancel the current print job. For non ‑ touch ‑ screen printer models, press to confirm.
  • Install additional printer memory.

Defective flash detected [51]

Try one or more of the following:

  • Replace the defective flash memory card.
  • From the printer control panel, select Continue to ignore the message and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm. • Cancel the current print job.

Disk must be formatted for use in this device

From the printer control panel, select Format disk to format the printer hard disk and clear the message. For non-

touch-screen printer models, press to confirm.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Fax memory full

From the printer control panel, touch Continue to clear the message.

Troubleshooting 241

Page 242 of the Lexmark 675 user manual — Imaging unit nearly low [84.xy]
Page 242 · click to enlarge
Page 242

Fax partition inoperative. Contact system administrator.

Try either of the following:

  • From the printer control panel, select Continue to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Turn the printer off, and then turn it back on. If the message appears again, then contact your system support person or see the “Setting up the printer to fax” section of the User’s Guide.

Fax server 'To Format' not set up. Contact system administrator.

Try either of the following:

  • From the printer control panel, select Continue to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Complete the Fax Server setup. If the message appears again, then contact your system support person.

Fax Station Name not set up. Contact system administrator.

Try either of the following:

  • From the printer control panel, select Continue to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Complete the Analog Fax Setup. If the message appears again after completing the setup, then contact your system support person.

Fax Station Number not set up. Contact system administrator.

Try either of the following:

  • From the printer control panel, select Continue to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Complete the Analog Fax Setup. If the message appears again after completing the setup, then contact your system support person.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear the message

and continue printing. For non‑touch‑screen printer models, press to confirm.

Imaging unit nearly low [84.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Troubleshooting 242

Page 243 of the Lexmark 675 user manual — Insufficient memory, some held jobs will not be restored [37]
Page 243 · click to enlarge
Page 243

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

  • Load the correct size of paper in the paper source.
  • From the printer control panel, select Continue to clear the message and print using a different paper source. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Check the length and width guides of the paper source and make sure the paper is loaded properly.
  • Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
  • Make sure the paper size and type are specified in the Paper menu on the printer control panel.
  • Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Cancel the print job.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

  • From the printer control panel, select Continue to stop the defragmentation and continue printing. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Delete fonts, macros, and other data from the printer memory.
  • Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.

Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press

to confirm. • Delete other held jobs to free up additional printer memory.

Troubleshooting 243

Page 244 of the Lexmark 675 user manual — Load manual feeder with [paper size] [paper orientation]
Page 244 · click to enlarge
Page 244

Insufficient memory to collate job [37]

Try one or more of the following:

  • From the printer control panel, select Continue to print the part of the job already stored and begin collating the

rest of the print job. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or select Continue on the printer control panel to disable Resource Save, clear the

message, and continue printing. For non‑touch‑screen printer models, press to confirm.

Load manual feeder with [custom string] [paper orientation]

Try one or more of the following:

  • Load the feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load manual feeder with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load manual feeder with [paper size] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Troubleshooting 244

Page 245 of the Lexmark 675 user manual — Load [paper source] with [paper size] [paper orientation]
Page 245 · click to enlarge
Page 245

Load manual feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct size and type of paper.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load [paper source] with [custom string] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel.

For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel.

For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size of paper.
  • To use the tray or feeder that has the correct size of paper, select Finished loading paper on the printer control

panel. For non‑touch‑screen printer models, press to confirm.

Troubleshooting 245

Page 246 of the Lexmark 675 user manual — Memory full [38]
Page 246 · click to enlarge
Page 246

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray or feeder that has the correct size and type of paper, select Finished loading paper on the printer

control panel. For non‑touch‑screen printer models, press to confirm.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Maintenance kit nearly low [80.xy]

For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Memory full [38]

Try one or more of the following:

  • From the printer control panel, select Cancel job to clear the message. For non ‑ touch ‑ screen printer models, press

to confirm. • Install additional printer memory.

Troubleshooting 246

Page 247 of the Lexmark 675 user manual — Non ‑ Lexmark [supply type], see User’s Guide [33.xy]
Page 247 · click to enlarge
Page 247

Memory full, cannot print faxes

From the printer control panel, select Continue to clear the message without printing. For non‑touch‑screen printer

models, press to confirm.

Memory full, cannot send faxes

1 From the printer control panel, select Continue to clear the message and cancel the fax job. For non‑touch‑screen

printer models, press to confirm.

  • 2 Do either of the following:
  • Reduce the fax resolution, and then resend the fax job.
  • Reduce the number of pages in the fax, and then resend fax job.

Network [x] software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer models, press
  • to confirm.
  • Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

No analog phone line connected to modem, fax is disabled.

Connect the printer to an analog phone line.

Non ‑ Lexmark [supply type], see User’s Guide [33.xy]

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, press

and the # button on the printer control panel simultaneously for 15 seconds.

Troubleshooting 247 · and hold

Page 248 of the Lexmark 675 user manual — Reinstall missing or unresponsive imaging unit [31.xy]
Page 248 · click to enlarge
Page 248

For non‑touch‑screen printer models, press and

on the printer control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install a genuine Lexmark supply or part.

Not enough free space in flash memory for resources [52]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message and continue printing. For non ‑ touch ‑ screen
  • printer models, press to confirm.
  • Delete fonts, macros, and other data stored in the flash memory.
  • Upgrade to a larger capacity flash memory card.

Printer had to restart. Last job may be incomplete.

to clear the message and continue printing. For non‑touch‑screen printer

From the printer control panel, touch

models, press to confirm.

For more information, visit http://support.lexmark.com or contact customer support.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

  • Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide. • If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide. • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Troubleshooting 248

Page 249 of the Lexmark 675 user manual — Printer and toner cartridge regions
Page 249 · click to enlarge
Page 249

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:

  • Select Cancel job to clear the message and cancel the scan job.
  • Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.
  • Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
  • Select Finish job without further scanning to end the last successful scan job.
  • Select Restart job to restart the scan job with the same settings from the previous scan job.
  • For non ‑ touch ‑ screen printer models, press to confirm.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

Printer and toner cartridge regions

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

  • The x and y values represent . xy in the code that appears on the printer control panel.
Show 5 more labels / short text on this page
Troubleshooting 249 · Region number Region · 0 Global · 4 Latin America · 9 Invalid
Page 250 of the Lexmark 675 user manual — Replace unsupported cartridge [32.xy]
Page 250 · click to enlarge
Page 250
  • The x and y values must match for printing to continue.

Replace defective imaging unit [31.xy]

Replace the defective imaging unit to clear the message. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:

  • Select Cancel job to clear the message and cancel the scan job. For non ‑ touch ‑ screen printer models, press to confirm.
  • Select Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan

job. For non‑touch‑screen printer models, press to confirm. • Select Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job. For

non‑touch‑screen printer models, press to confirm. • Select Finish job without further scanning to end the last successful scan job. For non‑touch‑screen printer models,

press to confirm. • Select Restart job to restart the scan job with the same settings from the previous scan job. For non‑touch‑screen

printer models, press to confirm.

Replace maintenance kit, 0 estimated pages remain [80.xy]

The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact your service representative, and then report the message.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Troubleshooting 250

Page 251 of the Lexmark 675 user manual — Scanner jam, remove jammed originals from the scanner [2yy.xx]
Page 251 · click to enlarge
Page 251

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Restore held jobs?

Try one or more of the following:

  • From the printer control panel, select Restore to restore all held jobs stored in the printer hard disk. For

non‑touch‑screen printer models, press to confirm. • From the printer control panel, select Do not restore if you do not want any print jobs to be restored. For

non‑touch‑screen printer models, press to confirm.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.

Scanner disabled. Contact system administrator if problem persists. [840.02]

From the printer control panel, try one or more of the following:

  • Select Continue with scanner disabled to return to the home screen, and then contact your system support person.
  • Select Reboot and automatically enable scanner to cancel the job.
  • For non ‑ touch ‑ screen printer models, press to confirm.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Troubleshooting 251

Page 252 of the Lexmark 675 user manual — Standard USB port disabled [56]
Page 252 · click to enlarge
Page 252

Serial option [x] error [54]

Try one or more of the following:

  • Make sure that the serial cable is properly connected and is the correct one for the serial port.
  • Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and computer.
  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer models, press

to confirm. • Turn off the printer, and then turn it back on.

SMTP server not set up. Contact system administrator.

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Some held jobs were not restored

From the printer control panel, select Continue to delete the specified job. For non‑touch‑screen printer models,

press to confirm.

Standard network software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer models, press
  • to confirm.
  • Turn off the printer and then turn it back on.
  • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

  • The printer discards any data received through the USB port.
  • Make sure the USB Buffer menu is not set to Disabled.

Troubleshooting 252

Page 253 of the Lexmark 675 user manual — Solving printer problems
Page 253 · click to enlarge
Page 253

Supply needed to complete job

Do either of the following:

  • Install the missing supply to complete the job.
  • Cancel the current job.

Too many flash options installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:

  • From the printer control, select Continue to stop the defragmentation and continue printing. For non ‑ touch ‑ screen

printer models, press to confirm. • Format the flash memory.

Weblink server not set up. Contact system administrator.

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Solving printer problems

  • “Basic printer problems” on page 254
  • “Hardware and internal option problems” on page 256
  • “Paper feed problems” on page 258

Troubleshooting 253

Page 254 of the Lexmark 675 user manual — The printer is not responding
Page 254 · click to enlarge
Page 254

Basic printer problems

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Go to step 6. Make sure to match the following:

Check if the cables connecting the printer and the computer are inserted in the correct ports.

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Step 6 Make sure the electrical outlet is not turned off by a switch or breaker.

Turn on the switch or reset the breaker.

Go to step 7.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Show 8 more labels / short text on this page
Troubleshooting 254 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 7
Page 255 of the Lexmark 675 user manual — Printer display is blank
Page 255 · click to enlarge
Page 255

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Step 10 Check if you have selected the correct port settings in the printer driver.

Go to step 11. Use correct printer driver settings.

Are the port settings correct?

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Printer display is blank

The problem is solved. Go to step 2.

Press the Sleep button on the printer control panel.

Does Ready appear on the printer display?

The problem is solved. Turn off the printer, and then contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Do Please wait and Ready appear on the printer display?

Show 9 more labels / short text on this page
Troubleshooting 255 · Action Yes No · Step 8 · Step 9 · Step 11 · Step 12 · Action Yes No · Step 1 · Step 2
Page 256 of the Lexmark 675 user manual — Internal Solutions Port does not operate correctly
Page 256 · click to enlarge
Page 256

Hardware and internal option problems

Cannot detect internal option

The problem is solved. Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?

Go to step 3. Connect the internal option to the controller board.

Check if the internal option is properly installed in the controller board.

a Turn off the printer using the power switch, and then unplug the power

cord from the electrical outlet. b Make sure the internal option is installed in the appropriate connector

in the controller board. c Connect the power cord to the printer, then to a properly grounded

electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

The problem is solved. Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 47. b Resend the print job.

Does the internal option operate correctly?

Internal Solutions Port does not operate correctly

Go to step 2. Check if you have a supported ISP.

Make sure the Internal Solutions Port (ISP) is installed.

a Install the ISP. For more information, see “Installing an Internal

Solutions Port” on page 31. b Print a menu settings page, and then check if the ISP is listed in the

Installed Options list.

Is the ISP listed in the Installed Options list?

Show 8 more labels / short text on this page
Troubleshooting 256 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Action Yes No · Step 1
Page 257 of the Lexmark 675 user manual — Tray problems
Page 257 · click to enlarge
Page 257

The problem is solved. Contact customer support.

Check the cable and the ISP connection.

a Use the correct cable, and then make sure it is securely connected to

the ISP. b Check if the ISP solution interface cable is securely connected into the

receptacle of the controller board.

Does the Internal Solutions Port operate correctly?

Tray problems

The problem is solved. Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved. Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn the

printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed and recognized by the printer.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

Show 7 more labels / short text on this page
Troubleshooting 257 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 258 of the Lexmark 675 user manual — Jammed pages are not reprinted
Page 258 · click to enlarge
Page 258

The problem is solved. Contact customer support.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

USB/parallel interface card does not operate correctly

Go to step 2. Check if you have a supported USB or parallel interface card.

Make sure the USB or parallel interface card is installed.

a Install the USB or parallel interface card. For more information, see

“Installing an Internal Solutions Port” on page 31. b Print a menu settings page, and then check if the USB or parallel

interface card is listed in the Installed Options list.

Is the USB or parallel interface card listed in the Installed Options list?

Contact customer support.

Connect the cable to the USB or parallel interface card connector.

Check if you are using the correct cable and if it is connected securely to the USB or parallel interface card.

Is the correct cable securely connected to the USB or parallel interface card?

Paper feed problems

Jammed pages are not reprinted

Turn on Jam Recovery.

The problem is solved. Contact customer support.

a From the home screen, navigate to:

> Settings > General Settings > Print Recovery b From the Jam Recovery menu, touch the arrows to scroll to On or

Auto. c Touch Submit.

Do pages reprint after a jam?

Show 7 more labels / short text on this page
Troubleshooting 258 · Action Yes No · Step 4 · Action Yes No · Step 1 · Step 2 · Action Yes No
Page 259 of the Lexmark 675 user manual — Paper jam message remains after jam is cleared
Page 259 · click to enlarge
Page 259

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see “Avoiding

jams” on page 226. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

Check the entire paper path for jammed paper.

Contact customer support.

The problem is solved.

a Remove any jammed paper. b From the printer control panel, touch Continue to clear the message.

Does the paper jam message remain?

Show 6 more labels / short text on this page
Troubleshooting 259 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 260 of the Lexmark 675 user manual — Confidential and other held jobs do not print
Page 260 · click to enlarge
Page 260

Solving print problems

Printing problems

Confidential and other held jobs do not print

Go to step 2. Select one of the Print and Hold options, and then resend the print job. For more information, see “Printing confidential and other held jobs” on page 81.

Open the held jobs folder on the printer display, and then verify that your print job is listed.

Is your print job listed in the held jobs folder?

Step 2 The print job may contain a formatting error or invalid data.

The problem is solved. Go to step 3.

  • Delete the print job, and then send it again.
  • For PDF files, generate a new PDF, and then print it again.

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.

a Open the Print Properties folder. b From the Print and Hold dialog, select the “Keep duplicate documents”

check box. c Enter a PIN number.

For Macintosh users Save each print job, name each job differently, and then send the individual jobs to the printer.

Does the job print?

The problem is solved. Add additional printer memory.

Free up additional printer memory by deleting some of the held jobs.

Does the job print?

Show 5 more labels / short text on this page
Troubleshooting 260 · Action Yes No · Step 1 · For Windows users · Step 3
Page 261 of the Lexmark 675 user manual — Incorrect characters print
Page 261 · click to enlarge
Page 261

Error message about reading the flash drive appears

Go to step 2. Insert the flash drive into the front USB port.

Check if the flash drive is inserted into the front USB port.

Is the flash drive inserted into the front USB port?

Wait until the printer is ready, then view the held jobs list, and then print the documents.

Go to step 3.

Check if the indicator light on the printer control panel is blinking green.

Is the indicator light blinking green?

Go to step 4. The problem is solved.

a Check for an error message on the display. b Clear the message.

Does the error message still appear?

Go to step 5. The problem is solved.

Check if the flash drive is supported.

For more information on tested and approved USB flash drives, see “Supported flash drives and file types” on page 79.

Does the error message still appear?

Contact customer support.

The problem is solved.

Check if the USB port is disabled by the system support person.

Does the error message still appear?

Incorrect characters print

Deactivate Hex Trace mode.

Go to step 2.

Make sure the printer is not in Hex Trace mode.

Is the printer in Hex Trace mode?

Contact customer support.

The problem is solved.

a From the printer control panel, select Standard Network or

Network [x], and then set SmartSwitch to On. b Resend the print job.

Do incorrect characters print?

Show 10 more labels / short text on this page
Troubleshooting 261 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Action Yes No · Step 1 · Step 2
Page 262 of the Lexmark 675 user manual — Large jobs do not collate
Page 262 · click to enlarge
Page 262

Job prints from the wrong tray or on the wrong paper

The problem is solved. Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 3.

a From the Paper menu on the printer control panel, set the paper size

and type to match the paper loaded in the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Go to step 4.

a Depending on your operating system, open Printing Preferences or

the Print dialog, and then specify the paper type. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved. Contact customer support.

a Check if the trays are not linked. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Large jobs do not collate

The problem is solved. Go to step 2.

a From the Finishing menu on the printer control panel, set Collate to

“(1,2,3) (1,2,3).” b Resend the print job.

Did the job print and collate correctly?

The problem is solved. Go to step 3.

a From the printer software, set Collate to “(1,2,3) (1,2,3).”

Did the job print and collate correctly?

Show 9 more labels / short text on this page
Troubleshooting 262 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Action Yes No · Step 1 · Step 2
Page 263 of the Lexmark 675 user manual — Printing slows down
Page 263 · click to enlarge
Page 263

The problem is solved. Contact customer support.

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Did the job print and collate correctly?

Multiple‑language PDF files do not print

The problem is solved. Go to step 2.

a Check if the print options for the PDF output are set to embed all fonts.

For more information, see the documentation that came with Adobe Acrobat. b Generate a new PDF file, and then resend the print job.

Do the files print?

The problem is solved. Contact customer support.

a Open the document you want to print in Adobe Acrobat. b Click File > Print > Advanced > Print As Image > OK > OK.

Do the files print?

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.

The problem is solved. Go to step 2.

a Make sure the size of the paper loaded in the tray matches the fuser

type.

Does the print speed increase?

Show 8 more labels / short text on this page
Troubleshooting 263 · Action Yes No · Step 3 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 264 of the Lexmark 675 user manual — Print jobs do not print
Page 264 · click to enlarge
Page 264

The problem is solved. Contact customer support.

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Does the print speed increase?

Print jobs do not print

The problem is solved. Go to step 2.

a From the document you are trying to print, open the Print dialog and

check if you have selected the correct printer.

Do the jobs print?

The problem is solved. Go to step 3.

a Check if the printer is plugged in and turned on, and if Ready appears

on the printer display. b Resend the print job.

Do the jobs print?

The problem is solved. Go to step 4.

If an error message appears on the printer display, then clear the message.

Do the jobs print?

The problem is solved. Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if the

cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved. Go to step 6.

a Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

Show 9 more labels / short text on this page
Troubleshooting 264 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 265 of the Lexmark 675 user manual — Print job takes longer than expected
Page 265 · click to enlarge
Page 265

The problem is solved. Contact customer support.

a Remove, and then reinstall the printer software. For more

information, see “Installing the printer software” on page 46.

Do the jobs print?

Print job takes longer than expected

The problem is solved. Go to step 2.

Change the environmental settings of the printer.

a From the printer control panel, navigate to:

Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off.

Did the job print?

The problem is solved. Go to step 3.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the job

Did the job print?

The problem is solved. Go to step 4.

a Remove held jobs stored in the printer memory. b Resend the print job.

Did the job print?

The problem is solved. Go to step 5.

a Disable the Page Protect feature.

From the printer control panel, navigate to:

Settings > General Settings > Print Recovery > Page Protect > Off b Resend the print job.

Did the job print?

Show 8 more labels / short text on this page
Troubleshooting 265 · Action Yes No · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 266 of the Lexmark 675 user manual — Tray linking does not work
Page 266 · click to enlarge
Page 266

The problem is solved. Go to step 6.

a Check if the cable connections to the printer and print server are

secure. For more information, see the setup documentation that came with the printer. b Resend the print job.

Did the job print?

The problem is solved. Contact customer support.

Install additional printer memory, and then resend the print job.

Did the job print?

Tray linking does not work

  • The trays can detect paper length.
  • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu.

The problem is solved. Go to step 2.

a Open the trays, and then check if they contain paper of the same size

and type.

  • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. b Resend the print job.

Do the trays link correctly?

The problem is solved. Contact customer support.

a From the printer control panel, set the paper size and type in the Paper

menu to match the paper loaded in the trays to be linked.

Do the trays link correctly?

Show 7 more labels / short text on this page
Troubleshooting 266 · Action Yes No · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2
Page 267 of the Lexmark 675 user manual — Characters have jagged or uneven edges
Page 267 · click to enlarge
Page 267

Unexpected page breaks occur

Increase the printing timeout.

The problem is solved. Check the original file for manual page breaks.

a From the home screen, navigate to:

> Settings > General Settings > Timeouts b Increase the Print Timeout setting, and then touch Submit.

c Resend the print job.

Did the file print correctly?

Print quality problems

Characters have jagged or uneven edges

Go to step 2. The problem is solved.

a Print a font sample list to check if the fonts you are using are supported

by the printer.

1 From the printer control panel, navigate to:

> Reports > Print Fonts 2 Touch PCL Fonts or PostScript Fonts. b Use a font that is supported by the printer or install the font that you

want to use. For more information, contact your system support person. c Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Contact customer support.

The problem is solved.

a Use a font that is supported by the printer or install the font that you

want to use on your computer. For more information, contact your system support person. b Resend the print job.

Do prints still contain characters that have jagged or uneven edges?

Show 5 more labels / short text on this page
Troubleshooting 267 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 268 of the Lexmark 675 user manual — Clipped pages or images
Page 268 · click to enlarge
Page 268

Clipped pages or images

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the paper loaded. b Resend the print job.

Is the page or image clipped?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Do the paper size and type match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Show 8 more labels / short text on this page
Troubleshooting 268 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 269 of the Lexmark 675 user manual — Gray background on prints
Page 269 · click to enlarge
Page 269

Compressed images appear on prints

Lexmark 675 — Compressed images appear on prints diagram (page 269)
Fig. 141 · Compressed images appear on prints

a Make sure the size of the paper loaded in the tray matches the fuser

a Replace the fuser. For more information on installing the fuser, see

the instruction sheet that came with the part. b Resend the print job.

Gray background on prints

Lexmark 675 — Gray background on prints diagram (page 269)
Fig. 142 · Gray background on prints

Check if Allow Background Removal is set to Off.

a From the General Settings menu, set Allow Background Removal to

a From the Quality Menu, select a lower value to reduce toner density.

  • 4 is the factory default setting.
  • If Print Mode is set to Black Only, then a setting of 5 increases toner density and darkness for all print jobs. b Resend the print job.

Troubleshooting 269

Page 270 of the Lexmark 675 user manual — Horizontal voids appear on prints
Page 270 · click to enlarge
Page 270
Lexmark 675 — Horizontal voids appear on prints diagram (page 270)
Fig. 143 · Horizontal voids appear on prints

a Depending on your operating system, set off-white background from

Print Properties or the Print dialog. b Resend the print job.

Horizontal voids appear on prints

Lexmark 675 — Horizontal voids appear on prints diagram (page 270)
Fig. 144 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Troubleshooting 270

Page 271 of the Lexmark 675 user manual — Incorrect margins on prints
Page 271 · click to enlarge
Page 271

Go to step 4. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do horizontal voids appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do horizontal voids appear on prints?

Incorrect margins on prints

ABCD ABCD ABCD

The problem is solved. Go to step 2.

a Move the width and length guides in the tray to the correct positions

for the paper size loaded. b Resend the print job.

Are the margins correct?

Step 2 From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray.

Go to step 3. Do one or more of the following:

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Does the paper size match the paper loaded in the tray?

Show 6 more labels / short text on this page
Troubleshooting 271 · Action Yes No · Step 3 · Step 4 · Action Yes No · Step 1
Page 272 of the Lexmark 675 user manual — Paper curl
Page 272 · click to enlarge
Page 272

The problem is solved. Contact customer support.

a Depending on your operating system, specify the paper size from

Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the paper still curled?

Go to step 5. The problem is solved.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Show 9 more labels / short text on this page
Troubleshooting 272 · Action Yes No · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 273 of the Lexmark 675 user manual — Print irregularities
Page 273 · click to enlarge
Page 273

Print irregularities

) ) ABCDE

ABCDE ABCDE

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded in the tray. b Resend the print job.

Do print irregularities still appear?

Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do print irregularities still appear?

From the printer control panel, set the paper texture in the Paper menu to match the paper loaded in the tray.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do print irregularities still appear?

Show 10 more labels / short text on this page
Troubleshooting 273 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 274 of the Lexmark 675 user manual — Print is too dark
Page 274 · click to enlarge
Page 274

Print is too dark

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, reduce the toner

darkness.

Is the print still too dark?

Go to step 3. Do one or more of the following:

a From the printer control panel, set the paper type, texture and weight

in the Paper menu to match the paper loaded in the tray. b Resend the print job.

  • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper type, texture and weight specified in the tray settings.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too dark?

Step 4 Check if the paper loaded in the tray has texture or rough finishes.

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Are you printing on textured or rough paper?

Show 5 more labels / short text on this page
Troubleshooting 274 · Action Yes No · Step 1 · Step 2 · Step 3
Page 275 of the Lexmark 675 user manual — Print is too light
Page 275 · click to enlarge
Page 275

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Print is too light

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, increase the toner

darkness.

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too light?

Show 8 more labels / short text on this page
Troubleshooting 275 · Action Yes No · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3
Page 276 of the Lexmark 675 user manual — Printer is printing blank pages
Page 276 · click to enlarge
Page 276

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Go to step 7. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Printer is printing blank pages

Show 6 more labels / short text on this page
Troubleshooting 276 · Action Yes No · Step 4 · Step 5 · Step 6 · Step 7
Page 277 of the Lexmark 675 user manual — Printer is printing solid black pages
Page 277 · click to enlarge
Page 277

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer still printing blank pages?

Printer is printing solid black pages

Show 5 more labels / short text on this page
Troubleshooting 277 · Action Yes No · Step 1 · Step 2 · Step 3
Page 278 of the Lexmark 675 user manual — Repeating defects appear on prints
Page 278 · click to enlarge
Page 278

Go to step 2. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Is the printer printing solid black pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Repeating defects appear on prints

Go to step 2. 1 Check if the distance between the defects equal to 80 mm (3.15 in.) 2 Take note of the distance, and then contact customer support at http://support.le xmark.com or your service representative.

Measure the distance between the defects.

Check for a distance between the defects that equals:

  • 97 mm (3.82 in.)
  • 47 mm (1.85 in.)
  • 38 mm (1.5 in.)

Is the distance between defects equal to one of the listed measurements?

Contact customer support at http://support.lexma rk.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do the repeating defects still appear?

Show 7 more labels / short text on this page
Troubleshooting 278 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 279 of the Lexmark 675 user manual — Skewed print
Page 279 · click to enlarge
Page 279

Shadow images appear on prints

Lexmark 675 — Shadow images appear on prints diagram (page 279)
Fig. 145 · Shadow images appear on prints

ABCD

Go to step 2. Load paper with the correct paper type and weight in the tray.

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type and

weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do shadow images still appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Skewed print

) ) ABCDE

ABCDE ABCDE

Show 8 more labels / short text on this page
Troubleshooting 279 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 280 of the Lexmark 675 user manual — Streaked horizontal lines appear on prints
Page 280 · click to enlarge
Page 280

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct positions

for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the tray. b Resend the print job.

Is the print still skewed?

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder from

Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked horizontal lines appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 280 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 281 of the Lexmark 675 user manual — Streaked vertical lines appear on prints
Page 281 · click to enlarge
Page 281
Lexmark 675 — Streaked vertical lines appear on prints diagram (page 281)
Fig. 146 · Streaked vertical lines appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Streaked vertical lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the paper type, texture,

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do streaked vertical lines appear on prints?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper texture, type, and weight in the Paper menu to match the paper loaded in the tray.

  • Specify the paper texture, type, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper texture, type, and weight specified in the tray settings.

Do the paper texture, type, and weight match the paper in the tray?

Show 6 more labels / short text on this page
Troubleshooting 281 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2
Page 282 of the Lexmark 675 user manual — Toner fog or background shading appears on prints
Page 282 · click to enlarge
Page 282

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked vertical lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked vertical lines appear on prints?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do streaked vertical lines appear on prints?

Toner fog or background shading appears on prints

ABCDE

ABCDE ABCDE

Step 1 Reinstall the imaging unit.

Go to step 2. The problem is solved.

a Remove, and then install the imaging unit. b Resend the print job.

Does fog or shading appear on prints?

Contact customer support at http://support.lexmar k.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Does fog or shading appear on prints?

Show 7 more labels / short text on this page
Troubleshooting 282 · Action Yes No · Step 3 · Step 4 · Step 5 · Action Yes No · Step 2
Page 283 of the Lexmark 675 user manual — Transparency print quality is poor
Page 283 · click to enlarge
Page 283

Toner rubs off

Lexmark 675 — Toner rubs off diagram (page 283)
Fig. 147 · Toner rubs off

Go to step 2. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the Paper menu on the printer control panel, check the paper type and weight.

Do the paper type and texture match the paper loaded in the tray?

From the Paper menu on the printer control panel, set the paper texture.

Check if you are printing on paper with texture or rough finishes.

Toner specks appear on prints

Lexmark 675 — Toner specks appear on prints diagram (page 283)
Fig. 148 · Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Transparency print quality is poor

Lexmark 675 — Transparency print quality is poor diagram (page 283)
Fig. 149 · Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

a Check if you are using a recommended type of transparency. b Resend the print job.

Troubleshooting 283

Page 284 of the Lexmark 675 user manual — Vertical voids appear on prints
Page 284 · click to enlarge
Page 284

Uneven print density

Lexmark 675 — Uneven print density diagram (page 284)
Fig. 150 · Uneven print density

Replace the imaging unit, and then resend the print job.

Vertical voids appear on prints

Lexmark 675 — Vertical voids appear on prints diagram (page 284)
Fig. 151 · Vertical voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a From the printer control panel, set the paper type and weight in the

Paper menu to match the paper loaded in the tray. b Resend the print job.

Step 3 Check if you are using a recommended type of paper.

a Load the specified tray or feeder with a recommended type of paper. b Resend the print job.

Troubleshooting 284

Page 285 of the Lexmark 675 user manual — Copier does not respond
Page 285 · click to enlarge
Page 285

Go to step 5. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do vertical voids appear on prints?

Solving copy problems

  • “Copier does not respond” on page 285
  • “Partial document or photo copies” on page 286
  • “Poor copy quality” on page 286
  • “Scanner unit does not close” on page 288

Copier does not respond

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Does an error or status message appear?

Go to step 3. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn it back on.

Did Performing Self Test and Ready appear?

Show 8 more labels / short text on this page
Troubleshooting 285 · Action Yes No · Step 4 · Step 5 · Action Yes No · Step 1 · Step 2 · Step 3
Page 286 of the Lexmark 675 user manual — Poor copy quality
Page 286 · click to enlarge
Page 286

Partial document or photo copies

Go to step 2. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 3. Change the paper size setting to match the paper loaded in the tray, or load the tray with paper that matches the paper size setting.

Check if the paper size setting matches the size of the paper loaded in the tray.

From the Paper menu on the printer control panel, check the Paper Size setting.

Does the paper size setting match the size of the paper loaded in the tray.

The problem is solved. Contact customer support.

a Specify the paper size. Depending on your operating system, specify

the paper size in Printing Preferences or the Print dialog. b Resend the print job.

Do copies print properly?

Poor copy quality

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Does an error or status message appear?

Go to step 3. Increase the scan resolution setting for a higher‑quality output.

Check the quality of the original document.

Is the quality of the original document satisfactory?

Go to step 4. See “Cleaning the scanner glass” on page 214.

If dark marks appear on prints, then clean the scanner glass and the ADF glass using a clean, lint-free cloth dampened with water.

Is the scanner glass clean?

Show 9 more labels / short text on this page
Troubleshooting 286 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3
Page 287 of the Lexmark 675 user manual — Partial document or photo copies
Page 287 · click to enlarge
Page 287

Go to step 5. See “Print quality problems” on page 267.

Send a print job, and then check for print quality problems.

a From the General Settings menu, adjust the Eco‑Mode settings. b From the Copy menu, adjust the Darkness setting.

c If the print remains faded, then replace the toner cartridge.

Is the print quality satisfactory?

Go to step 6. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 7. Change the Content Type and Content Source settings to match the document being scanned.

Check the copy settings.

From the Copy screen, check if the Content Type and Content Source settings are correct for the document being scanned.

Are the Content Type and Content Source settings correct for the document being scanned?

Go to step 8. The problem is solved.

Check for patterns on print.

a From the printer control panel, navigate to:

Copy > Sharpness > select a lower setting

Do patterns appear on prints?

Go to step 9. The problem is solved.

Check for missing or faded text on prints.

a From the Copy screen, adjust the settings of the following:

  • Sharpness —Increase the sharpness setting.
  • Contrast —Increase the contrast setting. b Resend the copy job.

Do prints have missing or faded text?

Show 7 more labels / short text on this page
Troubleshooting 287 · Action Yes No · Step 4 · Step 5 · Step 6 · Step 7 · Step 8
Page 288 of the Lexmark 675 user manual — Solving fax problems
Page 288 · click to enlarge
Page 288

Contact customer support.

The problem is solved.

Check for washed‑out or overexposed output.

a From the Copy screen, adjust the settings of the following:

  • Background Removal —Reduce the current setting.
  • Darkness —Increase the current setting. b Resend the copy job.

Do pages show washed‑out or overexposed prints?

Scanner unit does not close

Check if there are no obstructions between the scanner unit and the printer.

The problem is solved. Contact customer support.

a Lift the scanner unit. b Remove any obstruction that keeps the scanner unit open.

c Lower the scanner unit.

Did the scanner unit close properly?

Solving fax problems

  • “Caller ID is not shown” on page 289
  • “Cannot send or receive a fax” on page 289
  • “Can receive but not send faxes” on page 291
  • “Can send but not receive faxes” on page 292
  • “Fax and e-mail functions are not set up” on page 293
  • “Received fax has poor print quality” on page 293
Show 4 more labels / short text on this page
Troubleshooting 288 · Action Yes No · Step 9 · Action Yes No
Page 289 of the Lexmark 675 user manual — Cannot send or receive a fax
Page 289 · click to enlarge
Page 289

Caller ID is not shown

Contact your telephone company to check if your telephone line is subscribed to the caller ID service.

The problem is solved. Contact customer support.

  • If your region supports multiple caller ID patterns, then you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2).
  • The availability of these settings in the Fax menu depends on whether your country or region supports multiple caller ID patterns.
  • Contact your telephone company to determine which pattern or switch setting to use.

Does the caller ID appear?

Cannot send or receive a fax

Clear the error or status message.

Go to step 2.

Check if an error or status message appears on the display.

Is there an error or status message on the display?

Go to step 3. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Go to step 4. Turn on the printer, and then wait until Ready appears on the display.

Check the power.

Check if the printer is plugged in and turned on, and if Ready appears on the display.

Is the printer turned on, and does Ready appear on the display?

Step 4 Check the printer connections.

Go to step 5. Securely connect the cables.

If applicable, check if the cable connections for the following equipment are secure:

  • Telephone
  • Handset
  • Answering machine

Are the cable connections secure?

Show 6 more labels / short text on this page
Troubleshooting 289 · Action Yes No · Action Yes No · Step 1 · Step 2 · Step 3
Page 290 of the Lexmark 675 user manual — Caller ID is not shown
Page 290 · click to enlarge
Page 290

The problem is solved. Go to step 6.

a Check the telephone wall jack.

1 Plug the telephone cable into the wall jack. 2 Listen for a dial tone. 3 If you do not hear a dial tone, then plug a different telephone cable into the wall jack. 4 If you still do not hear a dial tone, then plug the telephone cable into a different wall jack. 5 If you hear a dial tone, then connect the printer to that wall jack. b Try sending or receiving a fax.

Can you send or receive a fax?

Go to step 7. Connect the printer to an analog phone service or the correct digital connector.

Check if the printer is connected to an analog phone service or the correct digital connector.

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.

  • If you are using an ISDN telephone service, then connect the printer to an analog telephone port (an R-interface port) on an ISDN terminal adapter. For more information and to request an Rinterface port, contact your ISDN provider.
  • If you are using DSL, then connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider.
  • If you are using a PBX telephone service, then make sure you are connecting to an analog connection on the PBX. If none exists, then consider installing an analog telephone line for the fax machine.

Is the printer connected to an analog phone service or the correct digital connector?

  • Go to step 8.
  • Try calling the fax number to make sure that it is working properly.
  • If the telephone line is being used by another device, then wait until the other device is finished before sending a fax.
  • If you are using the On Hook Dial feature, then turn up the volume to check if you hear a dial tone.

Check for a dial tone.

Did you hear a dial tone?

Show 5 more labels / short text on this page
Troubleshooting 290 · Action Yes No · Step 5 · Step 6 · Step 7
Page 291 of the Lexmark 675 user manual — Can receive but not send faxes
Page 291 · click to enlarge
Page 291

The problem is solved. Go to step 9.

Temporarily disconnect other equipment (such as answering machines, computers with modems, or telephone line splitters) between the printer and the telephone line, and then try sending or receiving a fax.

Can you send or receive a fax?

The problem is solved. Go to step 10.

a Temporarily disable call waiting. Contact your telephone company to

obtain the keypad sequence for temporarily disabling call waiting. b Try sending or receiving a fax.

Can you send or receive a fax?

The problem is solved. Go to step 11.

a Temporarily disable voice mail service. For more information, contact

your telephone company.

Can you send or receive a fax?

The problem is solved. Contact customer support.

Scan the original document one page at a time.

a Dial the fax number. b Scan the document one page at a time.

Can you send or receive a fax?

Can receive but not send faxes

The problem is solved. Go to step 2.

Check if the printer is in Fax mode.

From the home screen, touch Fax to put the printer in Fax mode, and then send the fax.

Can you send faxes?

Show 8 more labels / short text on this page
Troubleshooting 291 · Action Yes No · Step 8 · Step 9 · Step 10 · Step 11 · Action Yes No · Step 1
Page 292 of the Lexmark 675 user manual — Can send but not receive faxes
Page 292 · click to enlarge
Page 292

The problem is solved. Go to step 3.

Load the original document properly.

Load the original document faceup, short edge first into the ADF tray or facedown on the scanner glass in the upper left corner.

Can you send faxes?

Step 3 Set up the shortcut number properly.

The problem is solved. Contact customer support.

  • Check if the shortcut number has been set for the telephone number that you want to dial.
  • Dial the telephone number manually.

Can you send faxes?

Can send but not receive faxes

The problem is solved. Go to step 2.

Check the tray or feeder.

If empty, then load paper in the tray or feeder.

Can you receive faxes?

The problem is solved. Go to step 3.

Check the ring count delay settings.

a Open a Web browser, and then type the printer IP address in the

address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly. b Click Settings > Fax Settings > Analog Fax Setup .

c In the “Rings to Answer” field, enter the number of times you want

the phone to ring before the printer answers. d Click Submit.

Can you receive faxes?

Show 6 more labels / short text on this page
Troubleshooting 292 · Action Yes No · Step 2 · Action Yes No · Step 1 · Step 2
Page 293 of the Lexmark 675 user manual — Received fax has poor print quality
Page 293 · click to enlarge
Page 293

The problem is solved. Contact customer support.

Replace the toner cartridge. For more information, see the instruction sheet that came with the supply.

Can you receive faxes?

Fax and e-mail functions are not set up

  • Before you troubleshoot, check if the fax cables are connected.
  • The indicator light is blinking red until you set up fax and e ‑ mail.

a From the home screen, navigate to:

The problem is solved. Contact customer support.

> Settings > General Settings > Run initial setup > Yes > Submit b Turn off the printer, and then turn it back on.

The “Select your language” screen appears on the printer display.

. d Select a country or region, and then touch Next. e Select a time zone, and then touch Next.

c Select a language, and then touch

f Select Fax and E‑mail, and then touch Next.

Are fax and e‑mail functions set up?

Received fax has poor print quality

The problem is solved. Go to step 2.

Ask the person who sent you the fax to:

a Check if the quality of the original document is satisfactory. b Increase the fax scan resolution, if possible.

c Resend the fax.

Is the fax print quality satisfactory?

Show 6 more labels / short text on this page
Troubleshooting 293 · Action Yes No · Step 3 · Action Yes No · Action Yes No · Step 1
Page 294 of the Lexmark 675 user manual — Solving scanner problems
Page 294 · click to enlarge
Page 294

The problem is solved. Go to step 3.

Decrease the incoming fax transmission speed.

a Open a Web browser, and then type the printer IP address in the

address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. b Click Settings > Fax Settings > Analog Fax Setup .

c In the Max Speed menu, click one of the following:

  • 2400
  • 4800
  • 9600
  • 14400
  • 33600 d Click Submit , and then resend the fax.

Is the fax print quality satisfactory?

The problem is solved. Contact customer support.

Replace the toner cartridge.

When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax.

Is the fax print quality satisfactory?

Solving scanner problems

  • “Cannot scan from a computer” on page 295
  • “Partial document or photo scans” on page 295
  • “Poor scanned image quality” on page 295
  • “Scan job was not successful” on page 296
  • “Scanner unit does not close” on page 297
  • “Scanning takes too long or freezes the computer” on page 297
  • “The scanner does not respond” on page 298
Show 4 more labels / short text on this page
Troubleshooting 294 · Action Yes No · Step 2 · Step 3
Page 295 of the Lexmark 675 user manual — Poor scanned image quality
Page 295 · click to enlarge
Page 295

Cannot scan from a computer

Go to step 3. Go to step 2.

Make sure the printer is turned on and that Ready appears on the printer display before scanning a job.

Does Ready appear before scanning the job?

Clear the error message.

Go to step 3.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is there an error message on the printer display?

Contact customer support.

Tighten the cable connections.

Check the cable connections between the printer and the print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Are the cable connections between the printer and the print server secure?

Partial document or photo scans

Check the placement of the document or photo.

Contact customer support.

Load the document or photo facedown on the scanner glass in the upper left corner.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Poor scanned image quality

Clear the error message.

Go to step 2.

Check if an error message appears on the display.

Is there an error message on the printer display?

Go to step 3. Increase the scan resolution settings for a higher‑quality output.

Check the quality of the original document.

Is the quality of the original document satisfactory?

Show 9 more labels / short text on this page
Troubleshooting 295 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 296 of the Lexmark 675 user manual — Scan job was not successful
Page 296 · click to enlarge
Page 296

Go to step 4. See “Cleaning the scanner glass” on page 214.

Clean the scanner glass and the ADF glass using a clean, lint‑free cloth dampened with water.

Is the scanner glass clean?

Go to step 5. Place the document or photo facedown on the scanner glass in the upper left corner.

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 6. See “Print quality problems” on page 267.

Send a print job, and then check for print quality problems.

  • From the General Settings menu, adjust the Eco ‑ Mode settings.
  • From the Copy menu, adjust the Darkness setting.
  • When the print becomes faded, replace the toner cartridge.

Is the print quality satisfactory?

Go to step 7. Change the Content Type and Content Source settings to match the document being scanned.

Check the scan settings.

From the Scan screen, make sure the Content Type and Content Source settings are correct for the document being scanned.

Are the Content Type and Content Source settings correct for the document being scanned?

Step 7 Increase the scan resolution settings for a higher‑quality output.

Problem solved. Contact customer support.

Did the increased resolution produce a higher‑quality output?

Scan job was not successful

Go to step 2. Connect the cables properly.

Check the cable connections.

Make sure the Ethernet or USB cable is securely connected to the computer and the printer.

Are the cables securely connected?

Change the file name. Go to step 3.

Check if the file name is already in use.

Is the file name already in use?

Show 9 more labels / short text on this page
Troubleshooting 296 · Action Yes No · Step 3 · Step 4 · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2
Page 297 of the Lexmark 675 user manual — Scanning takes too long or freezes the computer
Page 297 · click to enlarge
Page 297

Close the file you are scanning.

Go to step 4.

Check if the document or photo you want to scan is open in another application or being used by another user.

Is the file you want to scan open by another application or user?

Contact customer support.

Select the Append time stamp or Overwrite existing file check box in the destination configuration settings.

Check if either the Append time stamp or the Overwrite existing file check box is selected in the destination configuration settings.

Is the Append time stamp or Overwrite existing file check box selected in the destination configuration settings?

Scanner unit does not close

Check if there are obstructions in the scanner unit.

The problem is solved. Contact customer support.

a Lift the scanner unit. b Remove any obstruction keeping the scanner unit open.

c Lower the scanner unit.

Did the scanner unit close correctly?

Scanning takes too long or freezes the computer

Go to step 2. The problem is solved.

Check if other applications are interfering with the scan.

Close all applications that are not being used.

Does scanning still take too long or freeze the computer?

Step 2 Select a lower scan resolution.

Contact customer support.

The problem is solved.

Does scanning still take too long or freeze the computer?

Show 7 more labels / short text on this page
Troubleshooting 297 · Action Yes No · Step 3 · Step 4 · Action Yes No · Action Yes No · Step 1
Page 298 of the Lexmark 675 user manual — The scanner does not respond
Page 298 · click to enlarge
Page 298

The scanner does not respond

Go to step 2. Turn on the printer.

Check if the printer is turned on.

Is the printer turned on?

Go to step 3. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if the printer cable is securely attached to the printer and the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 4. Connect the power cord to the printer and a properly grounded electrical outlet.

Check if the power cord is plugged into the printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Turn on the switch or reset the breaker.

Go to step 5.

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 6.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Unplug the other electrical equipment and turn on the printer. If the printer does not work, then reconnect the other electrical equipment and then go to step 6.

Go to step 7.

Check other electrical equipment plugged into the outlet.

Are the other electrical equipment working?

The problem is solved. Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Are the printer and scanner working?

Show 9 more labels / short text on this page
Troubleshooting 298 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6 · Step 7
Page 299 of the Lexmark 675 user manual — Embedded Web Server does not open
Page 299 · click to enlarge
Page 299

Solving home screen applications problems

An application error has occurred

Go to step 2. Contact customer support.

Check the system log for relevant details.

a Open a Web browser, and then type the printer IP address in the

address field.

If you do not know the IP address of the printer, then you can:

  • View the IP address on the printer home screen.
  • Print a network setup page or the menu settings pages, and then locate the IP address in the TCP/IP section.

c From the Filter menu, select an application status. d From the Application menu, select an application, and then click

Submit.

Does an error message appear in the log?

Step 2 Resolve the error.

The problem is solved. Contact customer support.

Is the application working now?

Embedded Web Server does not open

The problem is solved. Go to step 2.

a Turn on the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

Show 5 more labels / short text on this page
Troubleshooting 299 · Action Yes No · Step 1 · Action Yes No · Step 1
Page 300 of the Lexmark 675 user manual — Solving home screen applications problems
Page 300 · click to enlarge
Page 300

The problem is solved. Go to step 3.

Make sure the printer IP address is correct.

a View the printer IP address:

  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Does the Embedded Web Server open?

Step 3 Check if the network is working.

The problem is solved. Go to step 4.

a Print a network setup page. b Check the first section of the network setup page and confirm that the

status is Connected.

Does the Embedded Web Server open?

The problem is solved. Go to step 5.

Check if the cable connections to the printer and print server are secure.

a Connect the cables properly. For more information, see the setup

documentation that came with the printer. b Open a Web browser, and then type the printer IP address.

c Press Enter.

Does the Embedded Web Server open?

The problem is solved. Contact your system support person.

Temporarily disable the Web proxy servers.

Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server.

Does the Embedded Web Server open?

Show 5 more labels / short text on this page
Troubleshooting 300 · Action Yes No · Step 2 · Step 4 · Step 5
Page 301 of the Lexmark 675 user manual — Contacting customer support
Page 301 · click to enlarge
Page 301

Contacting customer support

When you contact customer support, you will need to be able to describe the problem you are experiencing, the message on the printer display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label at the back of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit http://support.lexmark.com.

Troubleshooting 301

Page 302 of the Lexmark 675 user manual — GOVERNMENT END USERS
Page 302 · click to enlarge
Page 302

Notices

Product information

Product name:

Lexmark MX410de, MX510de, MX511de, MX511dhe

Machine type:

Model(s):

470, 630, 670, 675

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2013 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

May 2013

Page 303 of the Lexmark 675 user manual — Noise emission levels
Page 303 · click to enlarge
Page 303

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Page 304 of the Lexmark 675 user manual — Product disposal
Page 304 · click to enlarge
Page 304

1-meter average sound pressure, dBA

Printing 53 dBA (MX410); 54 dBA (MX510, MX511)

Values are subject to change. See www.lexmark.com for current values.

Temperature information

Ambient operating temperature 15.6 to 32.2°C (60 to 90°F)

Shipping temperature -40 to 43.3°C (-40 to 110°F)

Storage temperature and relative humidity 1 to 35°C (34 to 95°F)

8 to 80% RH

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Scanning 45 dBA · Copying 55 dBA · Ready N/A

Page 305 of the Lexmark 675 user manual — Laser advisory label
Page 305 · click to enlarge
Page 305

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 306 of the Lexmark 675 user manual — 0 W
Page 306 · click to enlarge
Page 306

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 560 W (MX410); 600 W (MX510, MX511)

Copy The product is generating hard‑copy output from hard‑copy original documents.

580 W (MX410); 620 W (MX510, MX511)

Scan The product is scanning hard‑copy documents. 30 W (MX410); 35 W (MX510, MX511)

Ready The product is waiting for a print job. 13 W (MX410); 14 W (MX510, MX511)

Sleep Mode The product is in a high‑level energy‑saving mode. 6 W (MX410); 7 W (MX510, MX511)

Hibernate The product is in a low‑level energy‑saving mode. 0.5 W

Off The product is plugged into an electrical outlet, but the power switch is turned off.

0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Page 307 of the Lexmark 675 user manual — Avis de conformité aux normes de l’industrie du Canada
Page 307 · click to enlarge
Page 307

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 30

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and Switzerland

Factory default value for this product in EU countries or regions and Switzerland 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Disabled

Page 308 of the Lexmark 675 user manual — Notice to users of the US telephone network: FCC requirements
Page 308 · click to enlarge
Page 308

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

日本の VCCI 規定

製品にこのマークが表示されている場合、次の要件を満たしています。

この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをしてください。

VCCI-B

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for telecommunication terminal equipment

This section contains regulatory information pertaining to products that contain telecommunication terminal equipment such as facsimile.

Notice to users of the US telephone network: FCC requirements

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.

Page 309 of the Lexmark 675 user manual — Notice to users of the Canadian telephone network
Page 309 · click to enlarge
Page 309

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

Notice to users of the Canadian telephone network

This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is

Page 310 of the Lexmark 675 user manual — Notice to users of the New Zealand telephone network
Page 310 · click to enlarge
Page 310

recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

This equipment uses CA11A telephone jacks.

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.

Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.

This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:

  • There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
  • The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
  • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.
Page 311 of the Lexmark 675 user manual — Notice to Users in the European Union
Page 311 · click to enlarge
Page 311

Japanese telecom notice

The installed optional modem is in compliance with Japanese Telecommunication Law and has been Certified by JATE, with Certification Number A11-0160001.

Lexmark International, Inc.

LEX-M03-002

A11-0160001JP

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland. The filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.

Uso del prodotto in Svizzera

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.

Notice to Users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy‑related products.

Page 312 of the Lexmark 675 user manual — Industry Canada (Canada)
Page 312 · click to enlarge
Page 312

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Refer to the table at the end of the Notices section for further compliance information.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products.

Modular component notice

Wireless‑equipped models contain the following modular component(s):

Lexmark Regulatory Type/Model LEX-M01-005; FCC ID:IYLLEXM01005; IC:2376A-M01005

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Notice to users in Brazil

Este equipamento opera em carater secundario, isto e, nao tem direito a protecao contra interferencia prejudicial, mesmo de estacoes do mesmo tipo, e nao pode causar interferencia a sistemas operando em carater primario. (Res.ANATEL 282/2001).

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Page 314 of the Lexmark 675 user manual — Regulatory notices for wireless products
Page 314 · click to enlarge
Page 314

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

Lexmark 675 — Regulatory notices for wireless products diagram (page 314)
Fig. 152 · Regulatory notices for wireless products

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Page 315 of the Lexmark 675 user manual — Lexmark International, Inc., Lexington, KY
Page 315 · click to enlarge
Page 315

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

Page 316 of the Lexmark 675 user manual — Limited warranty service
Page 316 · click to enlarge
Page 316

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Page 317 of the Lexmark 675 user manual — Additional rights
Page 317 · click to enlarge
Page 317

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Page 318 of the Lexmark 675 user manual — Patent acknowledgment
Page 318 · click to enlarge
Page 318

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 320 of the Lexmark 675 user manual — Table of contents
Page 320 · click to enlarge
Page 320

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 321 of the Lexmark 675 user manual — Table of contents
Page 321 · click to enlarge
Page 321

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 322 of the Lexmark 675 user manual — Table of contents
Page 322 · click to enlarge
Page 322

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 323 of the Lexmark 675 user manual — Table of contents
Page 323 · click to enlarge
Page 323

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 324 of the Lexmark 675 user manual — Table of contents
Page 324 · click to enlarge
Page 324

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 325 of the Lexmark 675 user manual — Table of contents
Page 325 · click to enlarge
Page 325

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 326 of the Lexmark 675 user manual — Table of contents
Page 326 · click to enlarge
Page 326

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 327 of the Lexmark 675 user manual — Table of contents
Page 327 · click to enlarge
Page 327

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 328 of the Lexmark 675 user manual — Table of contents
Page 328 · click to enlarge
Page 328

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Page 329 of the Lexmark 675 user manual — Table of contents
Page 329 · click to enlarge
Page 329

Table of contents

Contentsp.2Safety informationp.7Learning about the printerp.9Finding information about the printerp.9Selecting a location for the printerp.10Printer configurationsp.11Understanding the basic functions of the scannerp.12Using the ADF and scanner glassp.13Understanding the printer control panelp.14Using the printer control panelp.14Understanding the colors of the Sleep button and indicator lightsp.14Understanding the home screenp.15Using the touch-screen buttonsp.16Setting up and using the home screen applicationsp.18Finding the IP address of the computerp.18Finding the IP address of the printerp.19Accessing the Embedded Web Serverp.19Customizing the home screenp.19Understanding the different applicationsp.20Activating the home screen applicationsp.20Finding information about the home screen applicationsp.20Setting up Forms and Favoritesp.20Setting up Card Copyp.21Using MyShortcutp.22Setting up Multi Sendp.22Setting up Scan to Networkp.23Setting up Remote Operator Panelp.24Exporting and importing a configurationp.24Additional printer setupp.26Installing internal optionsp.26Available internal optionsp.26Accessing the controller boardp.27Installing a memory cardp.28Installing an optional cardp.30Installing an Internal Solutions Portp.31Installing a printer hard diskp.38Removing a printer hard diskp.41Installing hardware optionsp.42Order of installationp.42Installing optional traysp.42Attaching cablesp.45Setting up the printer softwarep.46Installing the printer softwarep.46Updating available options in the printer driverp.47Networkingp.48Preparing to set up the printer on an Ethernet networkp.48Installing the printer on an Ethernet networkp.48Preparing to set up the printer on a wireless networkp.50Connecting the printer using the Wireless Setup Wizardp.51Connecting the printer to a wireless network using Wi-Fi Protected Setupp.51Connecting the printer to a wireless network using the Embedded Web Serverp.52Changing port settings after installing a new network Internal Solutions Portp.53Setting up serial printingp.54Verifying printer setupp.56Printing a menu settings pagep.56Printing a network setup pagep.56Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading traysp.57Loading the multipurpose feederp.62Linking and unlinking traysp.66Linking and unlinking traysp.66Creating a custom name for a paper typep.67Assigning a custom paper typep.67Configuring a custom namep.68Paper and specialty media guidep.69Using specialty mediap.69Tips on using letterheadp.69Tips on using transparenciesp.69Tips on using envelopesp.69Tips on using labelsp.70Tips on using card stockp.70Paper guidelinesp.71Paper characteristicsp.71Selecting paperp.72Selecting preprinted forms and letterheadp.72Using recycled paper and other office papersp.72Storing paperp.74Supported paper sizes, types, and weightsp.74Supported paper sizesp.74Supported paper types and weightsp.76Printingp.77Printing forms and a documentp.77Printing formsp.77Printing a documentp.77Adjusting toner darknessp.78Printing from a flash drive or mobile devicep.78Printing from a flash drivep.78Supported flash drives and file typesp.79Printing from a mobile devicep.80Printing confidential and other held jobsp.80Storing print jobs in the printerp.80Printing confidential and other held jobsp.81Modifying confidential print settingsp.82Printing information pagesp.82Printing a font sample listp.82Printing a directory listp.82Canceling a print jobp.83Canceling a print job from the printer control panelp.83Canceling a print job from the computerp.83Copyingp.84Making copiesp.84Making a quick copyp.84Copying using the ADFp.84Copying using the scanner glassp.85Copying photosp.85Copying on specialty mediap.85Copying on transparenciesp.85Copying on letterheadp.86Customizing copy settingsp.86Copying to a different sizep.86Making copies using paper from a selected trayp.86Copying different paper sizesp.87Copying on both sides of the paper (duplexing)p.88Reducing or enlarging copiesp.88Adjusting copy qualityp.88Collating copiesp.89Placing separator sheets between copiesp.90Copying multiple pages onto a single sheetp.90Placing information on copiesp.91Placing a header or footer on pagesp.91Placing an overlay message on each pagep.91Canceling a copy jobp.92Canceling a copy job while the original document is in the ADFp.92Canceling a copy job while copying pages using the scanner glassp.92Canceling a copy job while pages are being printedp.92Understanding the copy optionsp.92Copy fromp.92Copy top.92Scalep.93Darknessp.93Sides (Duplex)p.93Collatep.93Copiesp.93Contentp.93Advanced Duplexp.94Save As Shortcutp.94Margin Shiftp.94Edge Erasep.94Overlayp.94Cover Page Setupp.94Separator Sheetsp.94Header/Footerp.94Paper Saverp.95Advanced Imagingp.95Create Bookletp.95Custom Jobp.95Adjust ADF Skewp.95E-mailingp.96Setting up the printer to e-mailp.96Setting up the e-mail functionp.96Creating an e-mail shortcutp.96Creating an e-mail shortcut using the Embedded Web Serverp.96Creating an e-mail shortcut using the printer control panelp.97E-mailing a documentp.97Sending an e-mail using the printer control panelp.97Sending an e-mail using a shortcut numberp.98Sending an e-mail using the address bookp.98Customizing e-mail settingsp.99Adding e-mail subject and message informationp.99Changing the output file typep.99Canceling an e-mailp.100Understanding the e-mail optionsp.100Recipient(s)p.100Subjectp.100Messagep.100File Namep.100Save As Shortcutp.100Original Sizep.100Darknessp.101Resolutionp.101Send Asp.101Contentp.101Page Setupp.102Custom Jobp.102Scan Previewp.102Transmission Logp.102Edge Erasep.102Advanced Imagingp.102Adjust ADF Skewp.102Faxingp.103Setting up the printer to faxp.103Initial fax setupp.104Choosing a fax connectionp.105Scenario 1: Standard telephone linep.105Scenario 2: Digital Subscriber Line (DSL)p.109Scenario 3: VoIP telephone servicep.110Scenario 4: Digital telephone service through a cable providerp.111Scenario 5: Countries or regions with different telephone wall jacks and plugsp.112Connecting to a distinctive ring servicep.116Setting the outgoing fax name and numberp.116Setting the date and timep.117Configuring the printer to observe daylight saving timep.117Sending a faxp.117Sending a fax using the printer control panelp.117Sending a fax using the computerp.118Sending a fax using a shortcut numberp.119Sending a fax using the address bookp.119Sending a fax at a scheduled timep.119Creating shortcutsp.120Creating a fax destination shortcut using the Embedded Web Serverp.120Creating a fax destination shortcut using the printer control panelp.120Customizing fax settingsp.121Changing the fax resolutionp.121Making a fax lighter or darkerp.121Viewing a fax logp.121Blocking junk faxesp.122Canceling an outgoing faxp.122Canceling a fax while the original documents are still scanningp.122Canceling a fax after the original documents have been scanned to memoryp.122Holding and forwarding faxesp.123Holding faxesp.123Forwarding a faxp.123Understanding the fax optionsp.124Contentp.124Resolutionp.124Darknessp.124Page Setupp.124Custom Jobp.125Scan Previewp.125Delayed Sendp.125Advanced Imagingp.125Edge Erasep.125Transmission Logp.125Adjust ADF Skewp.125Scanningp.126Using Scan to Networkp.126Scanning to an FTP addressp.126Creating shortcutsp.127Creating an FTP shortcut using the Embedded Web Serverp.127Creating an FTP shortcut using the printer control panelp.127Scanning to an FTP addressp.128Scanning to an FTP address using the printer control panelp.128Scanning to an FTP address using a shortcut numberp.128Scanning to a computer or flash drivep.129Scanning to a computer using the Embedded Web Serverp.129Setting up Scan to Computerp.130Scanning to a flash drivep.131Understanding the scan optionsp.131FTP Addressp.131File Namep.131Save As Shortcutp.131Original Sizep.132Darknessp.132Resolutionp.132Send Asp.132Contentp.132Page Setupp.133Transmission Logp.133Scan Previewp.133Edge Erasep.133Advanced Imagingp.133Custom Jobp.133Adjust ADF Skewp.133Understanding the printer menusp.134Menus listp.134Paper menup.135Default Source menup.135Paper Size/Type menup.135Configure MP menup.138Substitute Size menup.139Paper Texture menup.139Paper Weight menup.140Paper Loading menup.142Custom Types menup.143Custom Names menup.143Custom Scan Sizes menup.144Universal Setup menup.144Reports Menup.145Reports menup.145Network/Ports menup.146Active NIC menup.146Standard Network or Network [x] menup.146Reports menup.148Network Card menup.148TCP/IP menup.148IPv6 menup.149Wireless menup.150AppleTalk menup.151Standard USB menup.151SMTP Setup menup.153Security menup.154Miscellaneous Security Settings menup.154Confidential Print menup.155Erase Temporary Data Files menup.155Security Audit Log menup.156Set Date and Time menup.156Settings menup.157General Settings menup.157Copy Settings menup.166Fax Settings menup.170Fax Mode (Analog Fax Setup) menup.170E-mail Settings menup.177FTP Settings menup.182Flash Drive menup.186Print Settingsp.190Setup menup.190Finishing menup.192Quality menup.193Job Accounting menup.194Utilities menup.195XPS menup.196PDF menup.196PostScript menup.197PCL Emul menup.197HTML menup.200Image menup.201Help menup.201Saving money and the environmentp.203Saving paper and tonerp.203Using recycled paperp.203Conserving suppliesp.203Saving energyp.204Using Eco-Modep.204Reducing printer noisep.204Adjusting Sleep modep.205Using Hibernate Modep.206Adjusting the brightness of the displayp.206Recyclingp.207Recycling Lexmark productsp.207Recycling Lexmark packagingp.207Returning Lexmark cartridges for reuse or recyclingp.207Securing the printerp.209Statement of Volatilityp.209Erasing volatile memoryp.209Erasing non-volatile memoryp.210Erasing printer hard disk memoryp.210Configuring printer hard disk encryptionp.211Finding printer security informationp.212Maintaining the printerp.213Cleaning the printer partsp.213Cleaning the printerp.213Cleaning the scanner glassp.214Checking the status of parts and suppliesp.215Checking the status of parts and supplies on the printer control panelp.215Checking the status of parts and supplies from the Embedded Web Serverp.215Estimated number of remaining pagesp.215Ordering suppliesp.215Using genuine Lexmark parts and suppliesp.215Ordering toner cartridgesp.216Ordering an imaging unitp.217Ordering a maintenance kitp.217Ordering an ADF separator rollerp.217Storing suppliesp.217Replacing suppliesp.218Replacing the toner cartridgep.218Replacing the imaging unitp.219Moving the printerp.222Before moving the printerp.222Moving the printer to another locationp.222Shipping the printerp.222Managing the printerp.223Finding advanced networking and administrator informationp.223Checking the virtual displayp.223Setting up e-mail alertsp.223Viewing reportsp.223Configuring supply notifications from the Embedded Web Serverp.224Restoring factory default settingsp.225Clearing jamsp.226Avoiding jamsp.226Understanding jam messages and locationsp.227[x]-page jam, open front door. [20y.xx]p.229[x]-page jam, open rear door. [20y.xx]p.232[x]-page jam, clear standard bin. [20y.xx]p.233[x]-page jam, remove tray 1 to clear duplex. [23y.xx]p.234[x]-page jam, open tray [x]. [24y.xx]p.235[x]-page jam, clear manual feeder. [25y.xx]p.236[x]-page jam, open automatic feeder top cover. [28y.xx]p.237Troubleshootingp.239Understanding printer messagesp.239Cartridge low [88.xy]p.239Cartridge nearly low [88.xy]p.239Cartridge very low, [x] estimated pages remain [88.xy]p.239Change [paper source] to [custom string] load [paper orientation]p.239Change [paper source] to [custom type name] load [orientation]p.239Change [paper source] to [paper size] load [orientation]p.240Change [paper source] to [paper type] [paper size] load [orientation]p.240Close flatbed cover and load originals if restarting job [2yy.xx]p.240Close front doorp.240Configuration change, some held jobs were not restored [57]p.240Complex page, some data may not have printed [39]p.241Defective flash detected [51]p.241Disk must be formatted for use in this devicep.241Error reading USB drive. Remove USB.p.241Error reading USB hub. Remove hub.p.241Fax memory fullp.241Fax partition inoperative. Contact system administrator.p.242Fax server 'To Format' not set up. Contact system administrator.p.242Fax Station Name not set up. Contact system administrator.p.242Fax Station Number not set up. Contact system administrator.p.242Imaging unit low [84.xy]p.242Imaging unit nearly low [84.xy]p.242Imaging unit very low, [x] estimated pages remain [84.xy]p.243Incorrect paper size, open [paper source] [34]p.243Insufficient memory for Flash Memory Defragment operation [37]p.243Insufficient memory, some Held Jobs were deleted [37]p.243Insufficient memory, some held jobs will not be restored [37]p.243Insufficient memory to collate job [37]p.244Insufficient memory to support Resource Save feature [35]p.244Load manual feeder with [custom string] [paper orientation]p.244Load manual feeder with [custom type name] [paper orientation]p.244Load manual feeder with [paper size] [paper orientation]p.244Load manual feeder with [paper type] [paper size] [paper orientation]p.245Load [paper source] with [custom string] [paper orientation]p.245Load [paper source] with [custom type name] [paper orientation]p.245Load [paper source] with [paper size] [paper orientation]p.245Load [paper source] with [paper type] [paper size] [paper orientation]p.246Maintenance kit low [80.xy]p.246Maintenance kit nearly low [80.xy]p.246Maintenance kit very low, [x] estimated pages remain [80.xy]p.246Memory full [38]p.246Memory full, cannot print faxesp.247Memory full, cannot send faxesp.247Network [x] software error [54]p.247No analog phone line connected to modem, fax is disabled.p.247Non-Lexmark [supply type], see User’s Guide [33.xy]p.247Not enough free space in flash memory for resources [52]p.248Printer had to restart. Last job may be incomplete.p.248Reinstall missing or unresponsive cartridge [31.xy]p.248Reinstall missing or unresponsive imaging unit [31.xy]p.248Remove paper from standard output binp.249Replace all originals if restarting job.p.249Replace cartridge, 0 estimated pages remain [88.xy]p.249Replace cartridge, printer region mismatch [42.xy]p.249Replace defective imaging unit [31.xy]p.250Replace imaging unit, 0 estimated pages remain [84.xy]p.250Replace jammed originals if restarting job.p.250Replace maintenance kit, 0 estimated pages remain [80.xy]p.250Replace unsupported cartridge [32.xy]p.250Replace unsupported imaging unit [32.xy]p.251Restore held jobs?p.251Scanner automatic feeder cover openp.251Scanner disabled by admin [840.01]p.251Scanner disabled. Contact system administrator if problem persists. [840.02]p.251Scanner jam, remove all originals from the scanner [2yy.xx]p.251Scanner jam, remove jammed originals from the scanner [2yy.xx]p.251Serial option [x] error [54]p.252SMTP server not set up. Contact system administrator.p.252Some held jobs were not restoredp.252Standard network software error [54]p.252Standard USB port disabled [56]p.252Supply needed to complete jobp.253Too many flash options installed [58]p.253Too many trays attached [58]p.253Unformatted flash detected [53]p.253Weblink server not set up. Contact system administrator.p.253Solving printer problemsp.253Basic printer problemsp.254The printer is not respondingp.254Printer display is blankp.255Hardware and internal option problemsp.256Cannot detect internal optionp.256Internal Solutions Port does not operate correctlyp.256Tray problemsp.257USB/parallel interface card does not operate correctlyp.258Paper feed problemsp.258Jammed pages are not reprintedp.258Paper frequently jamsp.259Paper jam message remains after jam is clearedp.259Solving print problemsp.260Printing problemsp.260Confidential and other held jobs do not printp.260Error message about reading the flash drive appearsp.261Incorrect characters printp.261Job prints from the wrong tray or on the wrong paperp.262Large jobs do not collatep.262Multiple-language PDF files do not printp.263Printing slows downp.263Print jobs do not printp.264Print job takes longer than expectedp.265Tray linking does not workp.266Unexpected page breaks occurp.267Print quality problemsp.267Characters have jagged or uneven edgesp.267Clipped pages or imagesp.268Compressed images appear on printsp.269Gray background on printsp.269Horizontal voids appear on printsp.270Incorrect margins on printsp.271Paper curlp.272Print irregularitiesp.273Print is too darkp.274Print is too lightp.275Printer is printing blank pagesp.276Printer is printing solid black pagesp.277Repeating defects appear on printsp.278Shadow images appear on printsp.279Skewed printp.279Streaked horizontal lines appear on printsp.280Streaked vertical lines appear on printsp.281Toner fog or background shading appears on printsp.282Toner rubs offp.283Toner specks appear on printsp.283Transparency print quality is poorp.283Uneven print densityp.284Vertical voids appear on printsp.284Solving copy problemsp.285Copier does not respondp.285Partial document or photo copiesp.286Poor copy qualityp.286Scanner unit does not closep.288Solving fax problemsp.288Caller ID is not shownp.289Cannot send or receive a faxp.289Can receive but not send faxesp.291Can send but not receive faxesp.292Fax and e-mail functions are not set upp.293Received fax has poor print qualityp.293Solving scanner problemsp.294Cannot scan from a computerp.295Partial document or photo scansp.295Poor scanned image qualityp.295Scan job was not successfulp.296Scanner unit does not closep.297Scanning takes too long or freezes the computerp.297The scanner does not respondp.298Solving home screen applications problemsp.299An application error has occurredp.299Embedded Web Server does not openp.299Contacting customer supportp.301Noticesp.302Product informationp.302Edition noticep.302GOVERNMENT END USERSp.302Trademarksp.303Federal Communications Commission (FCC) compliance information statementp.303Noise emission levelsp.303Temperature informationp.304Waste from Electrical and Electronic Equipment (WEEE) directivep.304Product disposalp.304Static sensitivity noticep.305ENERGY STARp.305Laser noticep.305Laser advisory labelp.305Power consumptionp.306Product power consumptionp.306Sleep Modep.307Hibernate Modep.307Off modep.307Total energy usagep.307Licensing noticesp.308日本の VCCI 規定p.308European Community (EC) directives conformityp.308Regulatory notices for telecommunication terminal equipmentp.308Notice to users of the US telephone network: FCC requirementsp.308Notice to users of the Canadian telephone networkp.309Notice to users of the New Zealand telephone networkp.310Japanese telecom noticep.311Notice to Users in the European Unionp.311Regulatory notices for wireless productsp.312Modular component noticep.312Exposure to radio frequency radiationp.312Notice to users in Brazilp.312Industry Canada (Canada)p.312Taiwan NCC RF notice statementp.313Notice to users in the European Unionp.313STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.315Patent acknowledgmentp.318Indexp.319
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 675

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 675

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 675 manual PDF

329 pages·10.3 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…