
User's Guide
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners.
© 2008 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550




Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.
Use care when you replace a lithium battery.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Use only the telecommunications (RJ-11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.
Safety information

Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
SAVE THESE INSTRUCTIONS.
Safety information

Finding information about the printer


Learning about the printer



CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
Learning about the printer


1 Based on 75 g/m2 (20 lb.) paper.
2 Up to two 5-bin mailbox units are supported.
3 The printer supports up to three output expander units, or one output expander combined with one 5-bin mailbox, one high capacity output expander (not depicted), or one stapler unit (not depicted).
4 Optional duplex unit available for basic model with a 250-sheet standard tray. Models with a 550-sheet standard tray may have an internal duplex unit.
Learning about the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

Learning about the printer


1 Display Shows messages and pictures that communicate the status of the printer
2 Navigation buttons Press the up or down arrow buttons to scroll through menus or menu items, or to
increase or decrease a value when entering numbers. Press the left or right arrow buttons to scroll through menu settings (also called values or options), or to scroll through text that rolls to another screen.
4 Keypad Enter numbers or symbols on the display.
5 Back Returns the display to the previous screen
6 Indicator light Indicates the printer status:
7 Stop Stops all printer activity A list of options is offered once Stopped appears on the display.
Learning about the printer
Item Description

8 Menu Opens the menu index
9 USB port Insert a flash drive into the front of the printer to print saved files.
Learning about the printer
Item Description

Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
All of these options may not be available. For more information, contact the place where you purchased the printer.
Additional printer setup

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Open the system board door.

2 Loosen the screw on the system board cover.

Additional printer setup

3 Remove the system board cover.

4 Use the illustration below to locate the appropriate connector.


3 Lexmark Internal Solutions Port or printer hard disk connector
Additional printer setup

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
An optional memory card can be purchased separately and attached to the system board. To install the memory card:
1 Access the system board.

2 Unpack the memory card.
3 Open the memory card connector latches.
Additional printer setup

4 Align the notches on the memory card with the ridges on the connector.

5 Push the memory card straight into the connector until it snaps into place.
6 Replace the system board cover and close the system board door.

1 Notches · 2 Ridges · Additional printer setup

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.

2 Unpack the card.
3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.

1 Plastic pins · 2 Metal pins · Additional printer setup

4 Push the card firmly into place.

5 Replace the system board cover and close the system board door.

Additional printer setup

The system board supports one optional Lexmark Internal Solutions Port (ISP). Install an ISP for additional connectivity options.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.

2 Unpack the ISP and plastic tee.
3 Locate the appropriate connector on the system board.

Additional printer setup

a Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer
hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

b Remove the screws holding the printer hard disk in place.

c Remove the printer hard disk by pulling it upward to unseat the standoffs.

Additional printer setup

d Remove the thumbscrews that attach the printer hard disk mounting bracket to the printer hard disk, and
then remove the bracket. Set the printer hard disk aside.

4 Remove the metal cover from the ISP opening.

Additional printer setup

5 Align the posts of the plastic tee to the holes in the system board, and then press downward until the tee snaps into place. Be sure each post of the tee has latched completely, and that the tee is seated firmly onto the system board.

6 Install the ISP onto the plastic tee. Angle the ISP over the plastic tee, and then approach the plastic tee so that any overhanging connectors will pass through the ISP opening in the system board cage.

Additional printer setup

7 Lower the ISP toward the plastic tee until the ISP is seated between the guides of the plastic tee.

8 Insert the long thumbscrew and turn it clockwise enough to hold the ISP in place, but do not tighten the thumbscrew at this time.

Additional printer setup

9 Attach the two provided screws to secure the ISP mounting bracket to the system board cage.

10 Tighten the long thumbscrew.
11 Insert the plug of the ISP interface cable into the receptacle of the system board.

12 If a printer hard disk was previously installed, then attach the printer hard disk to the ISP. For more information, see “Installing a printer hard disk” on page 30.
Additional printer setup

13 Replace the system board cover and close the system board door.

The optional printer hard disk can be installed with or without a Lexmark Internal Solutions Port (ISP).
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.

2 Unpack the printer hard disk.
Additional printer setup

3 Locate the appropriate connector on the system board.

To install a printer hard disk onto the ISP:
a Using a flathead screwdriver to loosen the screws, remove the thumbscrews that attach the printer hard disk
mounting bracket to the printer hard disk, and then remove the bracket.

b Align the standoffs of the printer hard disk with the holes in the ISP, and then press downward on the printer
hard disk until the standoffs have seated into place.

Additional printer setup

c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

To install a printer hard disk directly onto the system board:
a Align the standoffs of the printer hard disk with the holes in the system board, and then press downward on
the printer hard disk until the standoffs have seated into place.

Additional printer setup

b Attach the two provided screws to secure the printer hard disk mounting bracket.

c Insert the plug of the printer hard disk interface cable into the receptacle of the system board.

4 Replace the system board cover and close the system board door.

Additional printer setup

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/publications/furniture_safety.
Install the printer and any options you have purchased in the following order:
For more information on installing a printer stand, caster base, or 2000-sheet drawer, see the setup documentation that came with the option.
The printer supports up to four optional drawers. A drawer consists of a tray and a support unit. All drawers are installed the same way.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Unpack the drawer, and then remove any packing material.
2 Place the drawer in the location chosen for the printer.
3 Align the printer with the drawer, and then lower the printer into place.
Additional printer setup


To remove an optional drawer, push in the safety latches on both sides of the drawer until they click and stay recessed, and then lift the printer.


The optional duplex unit for the T650 model attaches under the printer, below the standard tray and above any optional drawers.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Additional printer setup

1 Unpack the duplex unit, and then remove any packing material.
2 Place the duplex unit in the location chosen for the printer.
3 Align the printer with the duplex unit, and then lower the printer into place.

To remove the duplex unit, push in the safety latches on both sides of the duplex unit until they click and stay recessed, and then lift the printer.


Connect the printer to the computer using a USB cable or Ethernet cable.
Be sure to match the following:
Additional printer setup


Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:
Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. To restore the factory default settings, see “Restoring the factory default settings” on page 177.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Menu Settings Page appears, and then press .
1 USB port · 2 Ethernet port · Additional printer setup

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Network Setup Page appears, and then press .
5 Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.
A printer driver is software that lets the computer communicate with the printer. The printer software is typically installed during the initial printer setup. If you need to install the software after setup, follow these instructions:
1 Close all open software programs.
2 Insert the Software and Documentation CD.
3 From the main installation dialog, click Install.
4 Follow the instructions on the screen.
1 Close all open software applications.
2 Insert the Software and Documentation CD.
3 From the Finder desktop, double-click the printer CD icon that automatically appears.
4 Double-click the Install icon.
5 Follow the instructions on the screen.
1 Go to the Lexmark Web site at www.lexmark.com.
2 From the Drivers & Downloads menu, click Driver Finder.
3 Select your printer, and then select your operating system.
4 Download the driver and install the printer software.
Additional printer setup

Once the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.
1 Do one of the following:
. b Click Control Panel.
c Click Hardware and Sound. d Click Printers.
a Click Start. b Click Printers and Faxes.
a Click Start. b Click Settings Printers.
2 Select the printer.
3 Right-click the printer, and then select Properties.
4 Click the Install Options tab.
5 Under Available Options, add any installed hardware options.
6 Click Apply.
In Mac OS X version 10.5
1 From the Apple menu, choose System Preferences.
2 Click Print & Fax.
3 Select the printer, and then click Options & Supplies.
4 Click Driver, and then add any installed hardware options.
5 Click OK.
1 From the Go menu, choose Applications.
2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.
3 Select the printer, and then from the Printers menu, choose Show Info.
a Click · Additional printer setup

4 From the pop-up menu, choose Installable Options.
5 Add any installed hardware options, and then click Apply Changes.
Information you will need to set up the printer on a wireless network
Some ad hoc networks will also require the auto setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key
If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently in use on the network by selecting the Default WEP Transmit Key. or – WPA or WPA2 passphrase
WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – No security
If your wireless network does not use any type of security, then you will not have any security information.
If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:
Before you install the printer on a wireless network, make sure that:
Additional printer setup

1 Connect the power cable, and then turn the printer on.


Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen
2 Insert the Software and Documentation CD.
3 Click Install.
4 Click Agree.
5 Click Suggested.
6 Click Wireless Network Attach.
Additional printer setup

7 Connect the cables in the following order: a Temporarily connect a USB cable between the computer on the wireless network and the printer.

8 Follow the on-screen instructions to complete the software installation.
9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer.
1 Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address in the space provided below:
2 If your printer has faxing capabilities, then connect the telephone cable.
3 Connect the power cable, and then turn the power on.


Additional printer setup

1 Access the AirPort options.
a From the Apple menu, choose System Preferences. b Click Network.
c Click AirPort.
a From the Go menu, choose Applications. b Double-click Internet Connect.
c From the toolbar, click AirPort.
2 From the Network pop-up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address located on the MAC address sheet.
3 Open the Safari browser.
4 From the Bookmarks drop-down menu, select Show.
5 Under Collections, select Bonjour or Rendevous, and then double-click the printer name.
6 From the main page of the Embedded Web Server, navigate to the page where the wireless settings information is stored.
1 Type the name of your network (SSID) in the appropriate field.
2 Select Infrastructure as your Network Mode if you are using a wireless router.
3 Select the type of security you use to protect your wireless network.
4 Enter the security information necessary for the printer to join your wireless network.
5 Click Submit.
6 Open the AirPort application on your computer:
a From the Apple menu, choose System Preferences. b Click Network.
c Click AirPort.
a From the Go menu, choose Applications. b Double-click Internet Connect.
c From the toolbar, click AirPort.
7 From the Network pop-up menu, select your wireless network.
Additional printer setup

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a printer in the Print Center or Printer Setup Utility.
1 Install a PPD file on the computer: a Insert the Software and Documentation CD in the CD or DVD drive. b Double-click the installer package for the printer.
c From the Welcome screen, click Continue. d Click Continue again after viewing the Readme file. e Click Continue after viewing the license agreement, and then click Agree to accept the terms of the
agreement. f Select a Destination, and then click Continue. g From the Easy Install screen, click Install. h Type the user password, and then click OK.
All necessary software is installed on the computer. i Click Close when installation is complete.
1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Select the printer from the list. 5 Click Add.
1 From the Go menu, choose Applications. 2 Double-click Utilities. 3 Locate and double-click Printer Setup Utility or Print Center. 4 From the Printer List, choose Add. 5 Select the printer from the list. 6 Click Add. b For AppleTalk printing:
1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.
Additional printer setup

1 From the Go menu, choose Applications. 2 Double-click Utilities. 3 Locate and double-click Print Center or Printer Setup Utility. 4 From the Printer List, choose Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.
Use the following instructions to install the printer on a wired network. These instructions apply to Ethernet and fiber optic network connections.
Before you install the printer on a wired network, make sure that:
1 Insert the Software and Documentation CD.
Wait for the Welcome screen to appear.
If the CD does not launch after a minute, then do one of the following:
. b In the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
a Click Start. b Click Run.
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
2 Click Install Printer and Software.
3 Click Agree to agree to the License Agreement.
4 Select Suggested, and then click Next.
5 Select Wired Network Attach, and then click Next.
6 Select the printer manufacturer from the list.
a Click · Additional printer setup

7 Select the printer model from the list, and then click Next.
8 Select the printer from the list of printers discovered on the network, and then click Finish.
9 Follow the on-screen instructions to complete the installation.
1 Allow the network DHCP server to assign an IP address to the printer.
2 Print the network setup page from the printer. For information on printing a network setup page, see “Printing a network setup page” on page 38.
3 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.
4 Install the drivers and add the printer. a Install a PPD file on the computer:
1 Insert the Software and Documentation CD in the CD or DVD drive. 2 Double-click the installer package for the printer. 3 From the Welcome screen, click Continue. 4 Click Continue again after viewing the Readme file. 5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement. 6 Select a Destination, and then click Continue. 7 From the Easy Install screen, click Install. 8 Type the user password, and then click OK. All the necessary software is installed on the computer. 9 Click Close when installation is complete. b Add the printer:
1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Select the printer from the list. 5 Click Add.
1 From the Go menu, choose Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Select the printer from the list. 6 Click Add.
Additional printer setup

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.
1 From the Go menu, choose Applications. 2 Double-click Utilities. 3 Double-click Print Center or Printer Setup Utility. 4 From the Printer List, click Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.
Additional printer setup

When a new network Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated because the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address in order to print to it over the network.
1 Print a network setup page and make a note of the new IP address.
2 Do one of the following:
. b Click Control Panel.
c Under Hardware and Sound, click Printer.
a Click Start. b Click Printers and Faxes.
a Click Start. b Click Settings Printers.
3 Locate the printer that has changed.
4 Right-click the printer.
5 Click Properties.
6 Click the Ports tab.
7 Locate the port in the list, and then select it.
8 Click Configure Port.
a Click · Additional printer setup

9 Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network setup page you printed in step 1.
10 Click OK, and then click Close.
1 Print a network setup page and make a note of the new IP address.
2 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.
a From the Apple menu, choose System Preferences. b Click Print & Fax.
c Click +. d Select the printer from the list. e Click Add.
a From the Go menu, choose Applications. b Double-click Utilities.
c Double-click Printer Setup Utility or Print Center. d From the Printer List, click Add. e Select the printer from the list.
f Click Add. • For AppleTalk printing:
a From the Apple menu, choose System Preferences. b Click Print & Fax.
c Click +. d Click AppleTalk. e Select the printer from the list.
f Click Add.
a From the Go menu, choose Applications. b Double-click Utilities.
c Double-click Print Center or Printer Setup Utility. d From the Printer List, click Add. e Choose the Default Browser tab.
f Click More Printers. g From the first pop-up menu, choose AppleTalk.
Additional printer setup

h From the second pop-up menu, select Local AppleTalk zone.
i Select the printer from the list. j Click Add.
In serial printing, data is transferred one bit at a time. Although serial printing is usually slower than parallel printing, it is the preferred option when there is a great deal of distance between the printer and computer or when an interface with a better transfer rate is not available.
After installing the serial port, you will need to configure the printer and the computer so they can communicate. Make sure you have connected the serial cable to the serial port on your printer.
1 Set the parameters in the printer: a From the printer control panel, navigate to the menu with port settings. b Locate the submenu with serial port settings.
c Make any necessary changes to the serial settings. d Save the new settings. e Print a menu settings page.
2 Install the printer driver: a Insert the Software and Documentation CD. It launches automatically.
If the CD does not launch automatically, do one of the following:
. 2 In the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
1 Click Start. 2 Click Run. 3 Type D:\setup.exe, where D is the letter of your CD or DVD drive.
b Click Install Printer and Software.
c Click Agree to accept the Printer Software License Agreement. d Click Custom. e Make sure Select Components is selected, and then click Next.
f Make sure Local is selected, and then click Next. g Select the manufacturer of the printer from the menu. h Select the printer model from the menu, and then click Add Printer.
i Click the + beside the printer model under Select Components. j Make sure the correct port is available under Select Components. This is the port where the serial cable attaches to the computer. If the correct port is not available, select the port under the Select Port menu, and then click Add Port.
1 Click · Additional printer setup

k Make any configuration changes necessary in the Add a New Port window. Click Add Port to finish adding
the port. l Make sure the box next to the selected printer model is checked. m Select any other optional software you want to install, and then click Next.
n Click Finish to complete the printer software installation.
3 Set the COM port parameters:
After the printer driver is installed, you must set the serial parameters in the communications (COM) port assigned to the printer driver.
The serial parameters in the COM port must match the serial parameters you set in the printer.
a Open the Device Manager. Do one of the following:
. 2 Click Control Panel. 3 Click System and Maintenance. 4 Click System. 5 Click Device Manager.
1 Click Start. 2 Click Control Panel. 3 Click Performance and Maintenance. 4 Click System. 5 From the Hardware tab, click Device Manager.
1 Click Start. 2 Click Settings Control Panel. 3 Click System. 4 From the Hardware tab, click Device Manager. b Click + to expand the list of available ports.
c Select the communications port where you attached the serial cable to your computer (example: COM1). d Click Properties. e On the Port Settings tab, set the serial parameters to the same serial parameters in the printer.
Look for the printer settings under the serial heading on the Menu Settings page you printed earlier. f Click OK, and then close all the windows. g Print a test page to verify printer installation. When a test page prints successfully, printer setup is complete.
1 Click · Additional printer setup

This section explains how to load the 250-, 550-, and 2000-sheet trays, and the multipurpose feeder. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.
The Paper Size setting is determined by the position of the paper guides in the tray for all trays except the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type setting is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .
4 Press the arrow buttons until Paper Size/Type appears, and then press .
5 Press the arrow buttons until the correct tray appears, and then press .
6 Press the arrow buttons until appears next to the correct size, and then press .
7 Press the arrow buttons until the correct Paper Type setting appears, and then press .
Ready appears.
The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .
4 Press the arrow buttons until Universal Setup appears, and then press .
Loading paper and specialty media

5 Press the arrow buttons until Units of Measure appears, and then press .
6 Press the arrow buttons until appears next to the correct unit of measure, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.
1 From the Universal Setup menu, press the arrow buttons until Portrait Width appears, and then press .
2 Press the arrow buttons to change the paper width setting, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
3 Press the arrow buttons until Portrait Height appears, and then press .
4 Press the arrow buttons to change the paper height setting, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
Although the 250-sheet tray and the 550-sheet tray are different in appearance, they require the same process for loading paper. Use these instructions to load paper in either tray:
1 Pull the tray out.

Loading paper and specialty media

2 Squeeze the width guide tab inward as shown, and move the width guide to the correct position for the paper size being loaded.

3 Unlock the length guide, squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being loaded.

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Loading paper and specialty media


Without an optional StapleSmart II Finisher With an optional StapleSmart II Finisher

6 If necessary, adjust the paper guides to lightly touch the sides of the stack, and lock the length guide for the paper sizes indicated on the tray.
Loading paper and specialty media

7 Insert the tray.

8 If a different type of paper was loaded than the type previously loaded in the tray, then change the Paper Type setting for the tray from the printer control panel.
1 Pull the tray out.
2 Pull up and slide the width guide to the correct position for the paper size being loaded.

Loading paper and specialty media

3 Unlock the length guide.

4 Push the length guide release latch to raise the length guide, slide the guide to the correct position for the paper size being loaded, and then lock the guide.

Loading paper and specialty media

5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.


Without an optional StapleSmart II Finisher With an optional StapleSmart II Finisher
Loading paper and specialty media


Without an optional StapleSmart II Finisher With an optional StapleSmart II Finisher

7 Insert the tray.
Loading paper and specialty media

1 Press the release latch, and then pull down the multipurpose feeder door.
2 Pull out the extension until it is fully extended.

3 Squeeze and slide the width guide to the far right.

4 Flex the sheets of paper or specialty media back and forth to loosen them, and then fan them. Do not fold or crease them. Straighten the edges on a level surface.

* Avoid touching the print side of transparencies. Be careful not to scratch them.
Loading paper and specialty media


* Avoid touching the print side of transparencies. Be careful not to scratch them.
5 Load the paper or specialty media. Slide the stack gently into the multipurpose feeder until it comes to a stop.

Without an optional StapleSmart II Finisher With an optional StapleSmart II Finisher
Loading paper and specialty media

6 Adjust the width guide to lightly touch the edge of the paper stack. Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
7 From the printer control panel, set the Paper Size and Paper Type.
2 Lift the envelope weight back toward the printer.

Loading paper and specialty media

3 Slide the width guide to the right.

4 Prepare the envelopes for loading.
Flex the envelopes back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the stack of envelopes flap side down.

6 Adjust the width guide to lightly touch the edge of the paper stack.
7 Lower the envelope weight to touch the paper stack.
8 From the printer control panel, set the Paper Size and Paper Type.
Loading paper and specialty media

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked.
The printer automatically senses the Paper Size setting according to the position of the paper guides in each tray except the multipurpose feeder. The printer can sense A4, A5, JIS B5, Letter, Legal, Executive, and Universal paper sizes. The multipurpose feeder and trays using other paper sizes can be linked manually using the Paper Size menu available from the Paper Size/Type menu.
The Paper Type setting must be set for all trays from the Paper Type menu available from the Paper Size/Type menu.
Unlinked trays have settings that are not the same as the settings of any other tray.
To unlink a tray, change the following tray settings so that they do not match the settings of any other tray:
Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name. • Paper Size (for example: letter, A4, statement)
Load a different paper size to change the Paper Size setting for a tray automatically. Paper Size settings for the multipurpose feeder are not automatic; they must be set manually from the Paper Size menu.
The standard exit bin holds up to 350 sheets or 550 sheets of 20 lb paper, depending on the printer model. If you need additional output capacity, you can purchase other optional exit bins.
Linking exit bins lets you create a single output source so the printer can automatically switch output to the next available exit bin.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .
4 Press the arrow buttons until Bin Setup appears, and then press .
5 Press the arrow buttons until the correct tray appears, and then press .
Loading paper and specialty media

6 Press the arrow buttons until Configure Bins appears, and then press .
7 Press the arrow buttons until Link appears, and then press .
You can use the Embedded Web Server or MarkVisionTM to define a name other than Custom Type for each of the custom paper types that are loaded. When a Custom Type name is changed, the menus display the new name instead of Custom Type .
To change a Custom Type name from the Embedded Web Server:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Under Default Settings, click Paper Menu.
4 Click Custom Names.
5 Type a name for the paper type in a Custom Name box.
6 Click Submit.
7 Click Custom Types.
Custom Types appears, followed by your custom name.
8 Select a Paper Type setting from the list next to your custom name.
9 Click Submit.
Loading paper and specialty media

Paper guidelines
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.
The printer can automatically feed paper weights from 60–176 g/m2 (16–47 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2 (20 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 (24 lb) or heavier paper.
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.
Paper smoothness directly affects print quality. If paper is too rough, then toner cannot fuse to it properly. If paper is too smooth, then it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; smoothness between 150 and 250 Sheffield points produces the best print quality.
The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.
Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.
For 60–176 g/m2 (16–47 lb bond) paper, grain long paper is recommended. For paper heavier than 176 g/m2, grain short is recommended.
Paper and specialty media guidelines

Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.
For detailed information on paper with recycled fiber content, see “Using recycled paper and other office papers” on page 68.
The following paper types are not recommended for use with the printer:
Using appropriate paper prevents jams and helps ensure trouble-free printing.
To help avoid jams and poor print quality:
Use these guidelines when selecting preprinted forms and letterhead:
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.
Paper and specialty media guidelines

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions.
As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket statement can be made that all recycled paper will feed well.
Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.
Recycled paper, paper of lower weight (
Use these paper storage guidelines to help avoid jams and uneven print quality:
Paper and specialty media guidelines

The following tables provide information on standard and optional paper sources and the types of paper they support.
For information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site.

Paper size Dimensions 250- or 550-sheet trays (standard or optional)
A4 210 x 297 mm (8.3 x 11.7 in.)
A5 148 x 210 mm (5.8 x 8.3 in.)
A61,2 105 x 148 mm (4.1 x 5.8 in.)
JIS B5 182 x 257 mm (7.2 x 10.1 in.)
Letter 216 x 279 mm (8.5 x 11 in.)
Legal 216 x 356 mm (8.5 x 14 in.)
Executive 184 x 267 mm (7.3 x 10.5 in.)
Oficio1 216 x 340 mm (8.5 x 13.4 in.)
Folio1 216 x 330 mm (8.5 x 13 in.)
Statement1 140 x 216 mm (5.5 x 8.5 in.)
1 This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing is turned off.
2 Only the standard exit bin supports this size.
3This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.
4 To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must be between 182 mm (7.2 in) and 356 mm (14 in).
Paper and specialty media guidelines

Paper size Dimensions 250- or 550-sheet trays (standard or optional)
Universal3,4 138 x 210 mm (5.5 x 8.3 in.) up to 216 x 356 mm (8.5 x 14 in.)
70 x 127 mm (2.8 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)
148 x 182 mm (5.8 x 7.7 in.) up to 216 x 356 mm (8.5 x 14 in.)
7 3/4 Envelope (Monarch)
98 x 191 mm (3.9 x 7.5 in.)
9 Envelope 98 x 225 mm (3.9 x 8.9 in.)
10 Envelope 105 x 241 mm (4.1 x 9.5 in.)
DL Envelope 110 x 220 mm (4.3 x 8.7 in.)
Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.)
1 This size appears in the Paper Size menu only when the paper source does not support size sensing or when size sensing is turned off.
2 Only the standard exit bin supports this size.
3This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application.
4 To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length must be between 182 mm (7.2 in) and 356 mm (14 in).
Paper and specialty media guidelines
Optional 2000-sheet tray · Multipurpose feeder · Duplex unit

The printer engine supports 60–176 g/m2 (16–47 lb) paper weights. The duplex unit supports 63–170 g/m2 (17–45 lb) paper weights.
Paper type 250- or 550-sheet trays (standard or optional)
Optional 2000-sheet tray Multipurpose feeder
Envelopes X X X
1 Printing labels requires a special label fuser cleaner which is included with the special cartridge required for label applications.
Use this table to determine the possible output destinations of print jobs which use supported paper types and weights. The paper capacity of each output bin is listed in parentheses. Paper capacity estimations are calculated based on 75 g/m2 (20 lb) paper.
Paper and specialty media guidelines

The finisher supports 60–176 g/m2 (16–47 lb) paper weights.
Paper type Standard exit bin (350 or 550 sheets)
Output Expander (550 sheets) or High Capacity Output Stacker (1850 sheets)
Card stock X X
1 Supports 60-90 g/m2 (16-24 lb) paper weights.
2 Maximum of 50 sheets of 75 g/m2 (20 lb) paper per stapled packet. Results may vary with heavier paper.
3 Printing labels requires a special label fuser cleaner which is included with the special cartridge required for label applications.
Paper and specialty media guidelines

This chapter covers printing, printer reports, and job cancelation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 82 and “Storing paper” on page 68.
1 Load paper into a tray or feeder.
2 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper.
3 Do one of the following:
a With a document open, click File Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.
a Customize the settings as needed in the Page Setup dialog:
1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:
1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop-up menus, adjust the settings as needed.
Printing

Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
Print samples on the envelopes being considered for use before buying large quantities.
When printing on envelopes:
Printing

– Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guide to fit the width of the envelopes.
Print samples on the labels being considered for use before buying large quantities.
For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications.
When printing on labels:
releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25 psi (172 kPa) pressure
Card stock is heavy, single-ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.
When printing on card stock:
Printing

When sending a job to the printer, you can specify that you want the printer to hold the job in memory until you start the job from the printer control panel. All print jobs that can be initiated by the user at the printer are called held jobs.
Confidential When you send a Confidential print job to the printer, you must create a PIN from the computer. The PIN must be four digits using the numbers 0–9. The job is held in printer memory until you enter the PIN from the printer control panel and choose to print or delete the job.
Verify When you send a Verify print job, the printer prints one copy and holds the remaining copies in printer memory. Verify lets you examine the first copy to see if it is satisfactory before printing the remaining copies. Once all copies are printed, the job is automatically deleted from printer memory.
Reserve When you send a Reserve print job, the printer does not print the job immediately. It stores the job in memory so you can print the job later. The job is held in memory until you delete it from the Held Jobs menu.
Repeat When you send a Repeat print job, the printer prints all requested copies of the job and stores the job in memory so you can print additional copies later. You can print additional copies as long as the job remains stored in memory.
Other types of held jobs include:
Job type Description · Printing

1 With a document open, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Click Other Options, and then click Print and Hold.
4 Select your job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.
5 Click OK or Print, and then go to the printer to release the job.
6 From the printer control panel, press the arrow buttons until Held jobs appears, and then press .
7 Press the arrow buttons until appears next to your user name, and then press .
8 Press the arrow buttons until appears next to the job type or job name, and then press .
If you selected a job name, proceed to step 11 on page 77.
9 After selecting your job type, use the keypad to enter your PIN.
If you enter an invalid PIN, the Invalid PIN screen appears.
10 Press the arrow buttons until appears next to the job you want to print, and then press .
11 Press the arrow buttons until appears next to the number of copies you want to print, and then press .
1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the print options or Copies & Pages pop-up menu, choose Job Routing.
3 Select your job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.
4 Click OK or Print, and then go to the printer to release the job.
5 From the printer control panel, press the arrow buttons until Held jobs appears, and then press .
6 Press the arrow buttons until appears next to your user name, and then press .
Printing

7 Press the arrow buttons until appears next to the job type or job name, and then press .
If you selected a job name, proceed to step 10 on page 78.
8 After selecting your job type, use the keypad to enter your PIN.
If you enter an invalid PIN, the Invalid PIN screen appears.
9 Press the arrow buttons until appears next to the job you want to print, and then press .
10 Press the arrow buttons until appears next to the number of copies you want to print, and then press .
A USB port is located on the printer control panel. Insert a flash drive to print supported file types. Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, .xps, and .dcx.
Many flash drives are tested and approved for use with the printer. For more information, visit the Lexmark Web site at www.lexmark.com.
To print from a flash drive:
1 Make sure the printer is on and Ready appears.
2 Insert a flash drive into the front USB port.
Printing

3 Press the down arrow button until appears next to the document you want to print, and then press .
4 Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print job.
If you leave the flash drive in the printer after leaving the initial USB menu screen, you can still print .pdf files from the flash drive as held jobs.
To print samples of the fonts currently available for your printer:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Print Fonts appears, and then press .
5 Press the arrow buttons until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press .
A directory list shows the resources stored in flash memory or on the hard disk.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Print Directory appears, and then press .
Printing

Print the print quality test pages to isolate print quality problems.
1 Turn the printer off.
2 Hold down and while turning the printer on.
3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4 Press the arrow buttons until Prt Quality Pgs appears, and then press .
The print quality test pages print.
5 Press the arrow buttons until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
If the job is formatting or already printing, and Cancel a job appears on the first line of the display:
1 Press the arrow buttons until Cancel appears.
A list of jobs appears.
2 Press the arrow buttons until appears next to the job you want to cancel, and then press .
until Cancel a job appears, and then press .
To cancel a print job, do one of the following:
In Windows Vista:
2 Click Control Panel.
3 Click Hardware and Sound.
4 Click Printers.
5 Double-click the printer icon.
6 Select the job to cancel.
7 From the keyboard, press Delete.
1 Click · Printing

In Windows XP:
1 Click Start.
2 From Printers and Faxes, double-click the printer icon.
3 Select the job to cancel.
4 From the keyboard, press Delete.
From the Windows taskbar:
When you send a job to print, a small printer icon appears in the right corner of the taskbar.
1 Double-click the printer icon.
A list of print jobs appears in the printer window.
2 Select a job to cancel.
3 From the keyboard, press Delete.
In Mac OS X version 10.5:
1 From the Apple menu, choose System Preferences.
2 Click Print & Fax, and then double-click the printer icon.
3 From the printer window, select the job to cancel.
4 From the icon bar at the top of the window, click the Delete icon.
In Mac OS X version 10.4 and earlier:
1 From the Go menu, choose Applications.
2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.
3 Double-click the printer icon.
4 From the printer window, select the job to cancel.
5 From the icon bar at the top of the window, click the Delete icon.
Printing

Jam error messages appear on the control panel display and include the area of the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed.
The following hints can help you avoid jams.
Clearing jams

When a jam occurs, a message indicating the jam location appears on the display. Open doors and covers and remove trays to access jam locations. To resolve any paper jam message, you must clear all jammed paper from the paper path and then press .

1 Push the release latch, and then lower the multipurpose feeder door.
2 Push the release latch, and then open the front cover.

3 Lift and pull the print cartridge out of the printer.
Clearing jams


4 Place the print cartridge aside on a flat, smooth surface.
5 Remove the jammed paper.
6 Align and reinstall the print cartridge.
7 Close the front cover.
8 Close the multipurpose feeder door.
9 Press .
If the paper is exiting the printer, then pull the paper out, and then press .
Clearing jams

If the paper is not exiting the printer:
1 Pull down the top rear door.

2 Slowly remove the jammed paper to avoid tearing it.
3 Close the top rear door.
4 Press .
1 Remove the standard tray from the printer.

Clearing jams

2 Pull down the bottom rear door.
3 Push the tab down.
4 Remove the jammed paper.
5 Close the bottom rear door.
6 Insert the standard tray.
7 Press .
Clearing jams

1 Remove the standard tray from the printer.
2 Push the tab down.

3 Remove the jammed paper.
4 Insert the standard tray.
5 Press .
1 Push in and hold the latch while pulling up the rear duplex door.

2 Remove the jammed paper.
Clearing jams

3 Close the rear duplex door.
4 Press .
1 Remove the standard tray from the printer.
2 Remove the duplex jam access tray.

3 Raise the recessed duplex bar.

4 Remove the jammed paper.
5 Replace the duplex jam access tray.
Clearing jams

6 Insert the standard tray.
7 Press .
1 Pull out the tray indicated on the display.

2 Remove any jammed paper, and then insert the tray.
3 Press .
4 If the jam message persists for a 250-sheet or 550-sheet tray, then remove the tray from the printer.
5 Remove the jammed paper, and then insert the tray.
6 Press .
1 Remove the paper from the multipurpose feeder.

Clearing jams

2 Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.
3 Load the paper into the multipurpose feeder.
4 Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper.

5 Press .
The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed.
1 Lift the envelope weight, and then remove all the envelopes.

2 If the jammed envelope has entered the printer and cannot be pulled out, then lift the envelope feeder up and then out of the printer, and then set it aside.
3 Remove the envelope from the printer.
4 Reinstall the envelope feeder. Make sure it snaps into place.
Clearing jams

5 Flex and stack the envelopes.
6 Load the envelopes in the envelope feeder.
7 Adjust the paper guide.
8 Lower the envelope weight.
9 Press .
To clear a jam in the output expander, high-capacity output stacker, the 5-bin mailbox, or the StapleSmart II Finisher:
1 If the paper is exiting into a bin, then pull the paper straight out, and then press .
If not, then continue with step 2.
2 Pull down the output bin door or doors.
3 Remove the jammed paper.
4 Close the output bin door or doors.
5 Press .
1 Pull down the StapleSmart II Finisher door.
2 Remove the jammed paper.
3 Close the StapleSmart II Finisher door.
4 Press .
Clearing jams

1 Clear the jam from the stapler output bin.

2 Press .
To prevent paper jams, the stapler motor does not run when the stapler door is open.
1 Close the stapler door until it clicks into place.

2 Press .
Clearing jams

1 Press the latch to open the stapler door.

2 Pull the latch of the staple cartridge holder down, and then pull the holder out of the printer.

3 Use the metal tab to lift the staple guard, and then remove any loose staples.

Clearing jams

4 Press down on the staple guard until it snaps into place.
5 Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place.
6 Close the stapler door.
7 Press .
Clearing jams

Menus list
A number of menus are available to make it easy for you to change printer settings:
Paper Menu Reports Network/Ports
Default Source Paper Size/Type Configure MP Envelope Enhance Substitute Size Paper Texture Paper Weight Paper Loading Custom Types Universal Setup Bin Setup
Menu Settings Page Device Statistics
Network Setup Page1
Standard USB Parallel Serial SMTP Setup
Profiles List NetWare Setup Page Print Fonts Print Directory Asset Report
1 Depending on the printer setup, this menu item appears as Network Setup Page or Network Setup Page.
2 Depending on the printer setup, this menu item appears as Standard Network or Network .
Miscellaneous Security Settings Confidential Print Disk Wiping Security Audit Log Set Date/Time
General Settings Setup Menu Finishing Menu Quality Menu Utilities Menu XPS Menu PDF Menu PostScript Menu PCL Emul Menu HTML Menu Image Menu Flash Drive Menu
Print All Print Quality Printing Guide Media Guide Print Defects Menu Map Information Guide Connection Guide Moving Guide Supplies Guide

Sets a default paper source for all print jobs
Tray MP Feeder Envelope Feeder Manual Paper Manual Env
Specifies the paper size loaded in each tray
A4 A5 A6 JIS B5 Letter Legal Executive1
1 Appears only if Tray Size Sensing is turned off.

Specifies the type of paper loaded in each tray
Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type
Specifies the paper size loaded in the multipurpose feeder
A4 A5 A6 JIS B5 Letter Legal Executive Oficio Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope Other Envelope
1 Appears only if Tray Size Sensing is turned off.

Specifies the type of paper loaded in the multipurpose feeder
Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type
Specifies the envelope size loaded in the envelope feeder
7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope Other Envelope
Specifies the type of envelope loaded in the envelope feeder
Envelope Rough Envelope Custom Type
1 Appears only if Tray Size Sensing is turned off.

Specifies the size of the paper being manually loaded
A4 A5 A6 JIS B5 Letter Legal Executive Oficio Folio Statement Universal
Specifies the type of paper being manually loaded
Plain Paper Card Stock Transparency Recycled Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type
Specifies the size of the envelope being manually loaded
7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope Other Envelope
Specifies the type of envelope being manually loaded
Envelope Rough Envelope Custom Type
1 Appears only if Tray Size Sensing is turned off.

Determines when the printer selects paper from the multipurpose feeder
The envelope conditioner significantly reduces the wrinkling of some envelopes.
Enables or disables the envelope conditioner
Off 1 (Least) 2 3 4 5 6 (Most)
Substitutes a specified paper size if the requested paper size is not available
Off Statement/A5 Letter/A4 All Listed

Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the card stock loaded in a specific tray
Specifies the relative texture of the transparencies loaded in a specific tray
Specifies the relative texture of the recycled paper loaded in a specific tray
Specifies the relative texture of the labels loaded in a specific tray
Specifies the relative texture of the vinyl labels loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the envelopes loaded in a specific tray
Specifies the relative texture of the rough envelopes loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the custom paper loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the card stock loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the recycled paper loaded in a specific tray
Specifies the relative weight of the labels loaded in a specific tray
Specifies the relative weight of the vinyl labels loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the envelopes loaded in a specific tray
Specifies the relative weight of the rough envelopes loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the paper loaded in a specific tray
Specifies the relative weight of the custom paper type loaded in a specific tray
Determines whether 2-sided printing occurs for all jobs that specify Card Stock as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Recycled as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Labels as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Vinyl Labels as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Bond as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Letterhead as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Preprinted as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Colored as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Light as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Heavy as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Rough as the paper type
Determines whether 2-sided printing occurs for all jobs that specify Custom as the paper type
Associates a paper or specialty media type with a factory default Custom Type <x> name or a user-defined Custom Name created from the Embedded Web Server or MarkVision Professional
Paper Card Stock Transparency Labels Vinyl Labels Envelope

Specifies a paper type when the Recycled setting is selected in other menus
Paper Card Stock Transparency Labels Vinyl Labels Envelope
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.
Identifies the units of measure
Sets the portrait width
3–14 inches 76–360 mm
Sets the portrait height
3–14 inches 76–360 mm

Specifies the feed direction if the paper can be loaded in either direction
Short Edge Long Edge
Specifies the default output bin
Standard Bin Bin
Specifies configuration options for output bins
Mailbox Link Mail Overflow Link Optional Type Assignment
Specifies an alternate output bin when a designated bin is full
Standard Bin Bin

Selects an output bin for each supported paper type Available selections for each type are:
Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Labels Bin Vinyl Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Bin Heavy Bin Rough/Cotton Bin Custom Bin
Disabled Standard Bin Bin
Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information
Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages
Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information
Network <x> Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information
Profiles List Prints a list of profiles stored in the printer

NetWare Setup Page Prints a report containing NetWare-specific information about the network settings
Prints a report in English of all the fonts available for the printer language currently set in the printer
PCL Fonts PostScript Fonts
Print Directory Prints a list of all the resources stored on an optional flash memory card or printer hard disk
Asset Report Prints a report containing asset information including the printer serial number and model name. The report contains text and UPC barcodes that can be scanned into an asset database.
Auto

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language
Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Sets the size of the network input buffer
Auto 3K to

Temporarily stores jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.
Sets the printer to process Macintosh binary PostScript print jobs
For descriptions and settings of the network setup menus, see the following:
Reports or Network Reports Network Card TCP/IP IPv6 AppleTalk NetWare LexLink
Reports or Network Reports Network Card TCP/IP IPv6 Wireless AppleTalk NetWare LexLink
This menu is available from the Network/Ports menu:

Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Reports or Network Reports
Print Setup Page Print NetWare Setup Page
Prints a report containing information about the current network setup
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Network Card
Lets you view the connection status of the Network Card
View Card Speed Lets you view the speed of a currently active network card
Lets you view the network addresses
Job Timeout 0-225 seconds Sets the amount of time in seconds that a network print job can take before it is canceled
Allows the printer to print a banner page
Use the following menu items to view or set the TCP/IP information.
This menu is available from the Network/Ports menu:

Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup TCP/IP
View Hostname Lets you view the current TCP/IP hostname
IP Address Lets you view or change the current TCP/IP Address
Netmask Lets you view or change the current TCP/IP Netmask
Gateway Lets you view or change the current TCP/IP Gateway
Specifies the DHCP address and parameter assignment setting
Specifies the RARP address assignment setting
Specifies the BOOTP address assignment setting
Specifies the Zero Configuration Networking setting
Enables the built-in FTP server, which allows you to send files to the printer using the File Transfer Protocol.
Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.
WINS Server Address Lets you view or change the current WINS Server Address
DNS Server Address Lets you view or change the current DNS Server Address
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
This menu is available from the Network/Ports menu:

Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup IPv6
Enables IPv6 in the printer
Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router
View Hostname View Address View Router Address
Lets you view the current setting
Enables DHCPv6 in the printer
Use the following menu items to view or configure the wireless internal print server settings.
This menu is available from the Network/Ports menu:
Network/Ports Network <x> Net <x> Setup Wireless
Specifies the network mode
Specifies the wireless standard for the wireless network
802.11n 802.11b/g 802.11b/g/n
Lets you select an available network for the printer to use
View Signal Quality Lets you view the quality of the wireless connection
View Security Mode Lets you view the encryption method for the wireless connection. “Disabled” indicates that the wireless network is not encrypted.

This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup AppleTalk
View Name Shows the assigned AppleTalk name
View Address Shows the assigned AppleTalk address
Provides a list of AppleTalk zones available on the network
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup NetWare
View Login Name Lets you view the assigned NetWare login name
Print Mode Lets you view the assigned NetWare print mode
Network Number Lets you view the assigned NetWare network number
Enables the Ethernet frame type setting
Ethernet 802.2 Ethernet 802.3 Ethernet Type II Ethernet SNAP
Reduces network traffic by allowing the transfer and acknowledgement of multiple data packets to and from the NetWare server

Specifies the NSQ/GSQ Mode setting
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup LexLink menu
View Nickname Lets you view the assigned LexLink nickname
Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language
Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Sets the size of the USB input buffer
Disabled Auto 3K to
Temporarily stores jobs on the printer hard disk before printing
Sets the printer to process Macintosh binary PostScript print jobs
Sets the network address, netmask, or gateway information for an external print server that is attached to the printer using a USB cable.
ENA Address ENA Netmask ENA Gateway

This menu appears only if an optional parallel card is installed.
Sets the printer to automatically switch to PCL emulation when a print job received through a parallel port requires it, regardless of the default printer language
Sets the printer to automatically switch to PS emulation when a print job received through a parallel port requires it, regardless of the default printer language
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Sets the size of the parallel input buffer
Disabled Auto 3K to

Temporarily stores jobs on the printer hard disk before printing
Enables bidirectional communication through the parallel port
Specifies the parallel port protocol
Determines whether or not the printer honors printer hardware initialization requests from the computer
Determines whether the parallel port data is sampled on the leading or trailing edge of strobe
Sets the printer to process Macintosh binary PostScript print jobs

Sets the network address, netmask, or gateway information for an external print server that is attached to the printer using a parallel cable.
ENA Address ENA Netmask ENA Gateway
This menu appears only if an optional serial card is installed.
Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language
Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

Sets the size of the serial input buffer
Disabled Auto 3K to
Temporarily stores jobs on the printer hard disk before printing
Selects the hardware and software handshaking settings for the serial port
Determines whether or not the printer communicates availability to the computer

Specifies the rate at which data can be received through the serial port
1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600
Specifies the number of data bits that are sent in each transmission frame
Sets the parity for serial input and output data frames
Even Odd None Ignore
Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used by most serial cables.
Use the following menu to configure the SMTP server.
Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway
Specifies SMTP server port information
Secondary SMTP Gateway Port

5–30 Specifies the amount of time in seconds before the server stops trying to send the e-mail
Reply Address Specifies a reply address of up to 128 characters in e-mail sent by the printer
Sets the printer to use SSL for increased security when connecting to the SMTP server
Specifies the type of user authentication required
No authentication required Login/Plain CRAM-MD5 Digest-MD5 NTLM Kerberos 5
Specifies what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials in order to send e-mail.
None Use Device SMTP Credentials
Device Userid Device Password Kerberos 5 Realm NTLM Domain

Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out
Login failures Failure time frame Lockout time Login timeout
Limits the number and time frames of failed login attempts from a computer before all remote users are locked out
Login failures Failure time frame Lockout time Login timeout

Limits the number of times an invalid PIN can be entered
Limits the amount of time a confidential job stays in the printer before it is deleted
Off 1 hour 4 hours 24 hours 1 week
Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.
Automatic Wiping marks all disk space used by a previous job and does not permit the file system to reuse this space until it has been sanitized. Only Automatic Wiping enables users to activate disk wiping without having to take the printer offline for an extended amount of time.

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Manual Wiping overwrites all disk space that has been used to hold data from a print job that has been processed (i.e. printed). This type of wipe does not erase any information related to an unprocessed print job.
Start now Do not start now
Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.
Single pass Multiple pass
Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Both manual and scheduled wiping allow the file system to reuse marked disk space without first having to wipe it.
Single pass Multiple pass

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Both manual and scheduled wiping allow the file system to reuse marked disk space without first having to wipe it.
Single pass Multiple pass
Export Log Enables an authorized user to export the security log
Specifies whether audit logs are deleted
Delete now Do not delete
Specifies whether and how the audit logs are created
Enable Audit Enable Remote Syslog Remote Syslog Facility Severity of events to log
View Date/Time Lets you view the current date and time settings for the printer

Enables Network Time Protocol, which synchronizes the clocks of devices on a network
Sets the language of the text appearing on the display
English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimizes the use of energy, paper, or specialty media
Off Energy Energy/Paper Paper
Reduces the amount of noise produced by the printer
Instructs the printer to run the setup wizard
Sets the amount of light from an optional output bin

Sets an alarm to sound when the printer requires operator intervention Available selections for each alarm type are:
Alarm Control Cartridge Alarm Staple Alarm
Sets the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue
Sets the amount of time the printer waits after a job is printed before it goes into a reduced power state
Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job
Sets the amount of time in seconds the printer waits for additional data before canceling a print job
Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period
Specifies whether the printer reprints jammed pages
Lets the printer successfully print a page that may not have printed otherwise

Returns the printer settings to the factory default settings
Do Not Restore Restore Now
Sets a pre-configured or customized message to appear on the display beside Ready
Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1
Sets the default printer language
PCL Emulation PS Emulation
Specifies that print jobs be removed from the print queue if they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information and/or options are obtained, the stored jobs print.

Sets the logical and physical printable area
Sets the storage location for downloads
Specifies whether the printer stores statistical information about the most recent print jobs on the hard disk

Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available
Specifies the order in which held and confidential jobs are printed when Print All is selected
Alphabetically Newest First Oldest First
Specifies whether duplex (2-sided) printing is set as the default for all print jobs
2 sided 1 sided
Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page
Long Edge Short Edge
1–999 Specifies a default number of copies for each print job

Specifies whether blank pages are inserted in a print job
Do Not Print Print
Stacks the pages of a print job in sequence when printing multiple copies
Off (1,1,1,2,2,2) On (1,2,1,2,1,2)
Specifies whether blank separator sheets are inserted
None Between Copies Between Jobs Between Pages
Specifies the paper source for separator sheets
Tray Multi-Purpose Feeder Envelope Feeder
Specifies that multiple-page images be printed on one side of a sheet of paper
Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up

Specifies the positioning of multiple-page images when using N-up (pages-sides)
Horizontal Reverse Horizontal Reverse Vertical Vertical
Specifies the orientation of a multiple-page sheet
Prints a border around each page image when using N-up (pages-sides)
Specifies whether print jobs are stapled
Stacks copies or print jobs into staggered sets in an output bin
Off Between Jobs Between Copies
Specifies the printed output resolution
300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enhances the printed quality of small fonts and graphics
Off Fonts Horizontally Vertically Both Directions
1–10 Lightens or darkens the printed output
Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts
Adjusts the gray value of printed output
Adjusts or darkens printed output and conserves toner
0–5 Adjusts the degree of difference between levels of gray in printed output

Removes confidential and held jobs from the printer hard disk
Confidential Held Not Restored All
Formats the flash memory. Flash memory refers to the memory added by installing a flash memory option card in the printer.
Delete Downloads on Disk
Removes downloads from the printer hard disk, including all held Jobs, buffered jobs, and parked jobs. Job accounting information is not affected.
Delete Now Do Not Delete
Prints a list of all stored job statistics or deletes the information from the printer hard disk
Assists in isolating the source of a print job problem
Provides an estimate of the percentage coverage of black on a page. The estimate is printed on a separate page at the end of each print job.

1–10 Adjusts the contrast lighting of the display
1–10 Adjusts the brightness of the backlight on the display
Prints a page containing information on errors, including XML markup errors
Scales page content to fit the selected paper size
Prints annotations in a PDF
Do Not Print Print
Prints a page containing the PostScript error

Establishes the font search order
Specifies the set of fonts used by the Font Name menu item
Resident Disk Download Flash All
Identifies a specific font and the option where it is stored
Specifies the symbol set for each font name

Changes the point size for scalable typographic fonts
1.00–1008.00
Specifies the font pitch for scalable monospaced fonts
0.08–100
Specifies the orientation of text and graphics on the page
Specifies the number of lines that print on each page
Sets the printer to print on A4-size paper
198 mm 203 mm
Specifies whether the printer automatically performs a carriage return after a line feed control command
Auto CR after LF

Specifies whether the printer automatically performs a line feed after a carriage return control command
Auto LF after CR
Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders
Off None 0–199 Assign Tray
Off None 0–199 Assign Manual Paper
Off None 0–199 Assign Man Env
Displays the factory default setting assigned to each tray, drawer, or feeder, even if it has not been installed
MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3
Returns all tray, drawer, and feeder assignments to the factory default settings

Intl CG Times Intl Courier Intl Univers Joanna MT Letter Gothic Lubalin Gothic Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery
Sets the default font for HTML documents
Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text
1–255 pt Sets the default font size for HTML documents
1–400% Scales the default font for HTML documents
Sets the page orientation for HTML documents
8–255 mm Sets the page margin for HTML documents

Specifies whether to print backgrounds on HTML documents
Do Not Print Print
Selects the optimal paper size, scaling, and orientation
Inverts bi-tonal monochrome images
Scales the image to fit the selected paper size
Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width
Sets the image orientation
Portrait Landscape Rev Portrait Rev Landscape
1–999 Specifies a default number of copies for each print job
Sets a default paper source for all print jobs
Tray MP Feeder Manual Paper Manual Env

Stacks the pages of a print job in sequence when printing multiple copies
Off (1,1,1,2,2,2) On (1,2,1,2,1,2)
Controls whether the job prints on one side or both sides of the paper
2 sided 1 sided
Specifies whether print jobs are stapled
Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page
Long Edge Short Edge
Specifies the orientation of a multiple-page sheet
Auto Long Edge Short Edge
Specifies that multiple-page images be printed on one side of a sheet of paper
Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up
Prints a border around each page image when using N-up (pages-side)

Specifies the positioning of multiple-page images when using N-up (pages-side)
Horizontal Reverse Horizontal Reverse Vertical Vertical
Specifies whether blank separator sheets are inserted
None Between Copies Between Jobs Between Pages
Specifies the paper source for separator sheets
Tray Multi-Purpose Feeder Envelope Feeder
Specifies whether blank pages are inserted in a print job
Do Not Print Print
The Help menu consists of a series of Help pages that are stored in the printer as PDFs. They contain information about using the printer and performing printing tasks.
English, French, German, and Spanish translations are stored in the printer. Other translations are available on the Software and Documentation CD.
Print All Prints all the guides
Print Quality Provides information about solving print quality issues
Printing Guide Provides information about loading paper and other speciality media
Media Guide Provides a list of the paper sizes supported in trays, drawers, and feeders
Print Defects Provides information about resolving print defects

Menu Map Provides a list of the printer control panel menus and settings
Information Guide Provides help in locating additional information
Connection Guide Provides information about connecting the printer locally (USB) or to a network
Moving Guide Provides instructions for safely moving the printer
Supplies Guide Provides part numbers for ordering supplies
Menu item Description · Understanding printer menus

When Manual Feeder appears on the display, it refers to the multipurpose feeder.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
is a tray or feeder, and is a paper type or size.
Try one or more of the following:
Try one or more of the following:
If the error occurs a second time:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the duplex unit. 4 Reattach the duplex unit. 5 Connect the power cord to a properly grounded outlet. 6 Restart the printer.
Understanding printer messages

If the error occurs again:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the duplex unit. 4 Contact Customer Support. • Press to clear the message and print without using the duplex unit.
Try one or more of the following:
If the error occurs a second time:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 If an optional duplex unit is installed, then remove it. 4 Remove the indicated tray. 5 Reattach the tray. 6 Connect the power cord to a properly grounded outlet. 7 Restart the printer.
If the error occurs again:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the tray. 4 Contact Customer Support. • Press to clear the message and print without using the tray.
Wait for the message to clear.
The cartridge is missing or not installed correctly. Insert the cartridge and close all doors and covers.
Close the finisher side door to clear the message.
Wait for the message to clear.
Understanding printer messages

Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Your attempt to delete a file failed.
1 Wait for the message to clear.
2 Try to delete the file again.
Wait for the message to clear.
Wait for the message to clear.
The printer attempted to recover a disk, but was not able to do so. Reformat appears. Press to reformat the disk.
Wait for the message to clear.
Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.
Wait for the message to clear.
Wait for the message to clear.
The percentage completed appears on the display.
Understanding printer messages

Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Wait for the message to clear.
Wait for the message to clear.
The percentage completed appears on the display.
Wait for the message to clear.
The printer is in the Ready state, and Hex Trace is active. You can use Hex Trace to troubleshoot printer problems.
Try one or more of the following:
Insert the specified tray into the printer.
Try one or more of the following:
Understanding printer messages

Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
The printer does not have a MICR cartridge installed. Install a MICR cartridge to continue printing.
You need to download valid engine code for the printer.
For more information, visit the Lexmark Web site at www.lexmark.com, or contact customer support.
Understanding printer messages

You need to download valid network printing code for the internal print server. The internal print server is a hardware option installed inside the printer.
Enter a valid PIN.
Try one or more of the following:
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default source. • Cancel the current job.
is a tray or feeder, and is a paper type or size.
Try one or more of the following:
Try one or more of the following:
Replace the maintenance items and, if necessary, reset the printer maintenance counter.
For information on purchasing supplies, see “Ordering supplies” on page 170.
The printer menus cannot be accessed because your system support person disabled the menus. Wait for the message to clear.
Understanding printer messages

The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your system support person for help.
The printer menus cannot be accessed at this time because the printer control panel does not show the Ready message. Wait for the printer to complete its activity. When Ready appears, press .
The printer is connected to the network, so the network interface is the active communication link.
Wait for the message to clear.
Wait for the message to clear.
The PIN you entered is not associated with any confidential print job.
Try one or more of the following:
Wait for the message to clear.
The printer is not ready to receive or process data, or the printer ports are offline.
Either there are no files saved on the flash drive, or the files saved are not supported. Convert files to any of the following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
Understanding printer messages

Remove the stack of paper from the bin to clear the message.
The printer is using a parallel cable connection. The parallel port is the active communication link.
This is the Printer Job Language (PJL) Ready message. It appears after the Ready or Power Saver message. If the message string is too long, it is truncated.
Wait for the message to clear.
The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power Saver mode.
Try one or more of the following:
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Understanding printer messages

Wait for the message to clear.
The printer is ready to receive print jobs.
Try one or more of the following:
If the error occurs a second time:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bin. 4 Reattach the bin. 5 Connect the power cord to a properly grounded outlet. 6 Restart the printer.
If the error occurs again:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bin. 4 Contact Customer Support. • Press to clear the message and print without using the specified bin.
Try one or more of the following:
If the error occurs a second time:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bins. 4 Reattach the bins. 5 Connect the power cord to a properly grounded outlet. 6 Restart the printer.
If the error occurs again:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bins. 4 Contact Customer Support.
Understanding printer messages

Try one or more of the following:
If the error occurs a second time:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the envelope feeder. 4 Reattach the envelope feeder. 5 Connect the power cord to a properly grounded outlet. 6 Restart the printer.
If the error occurs again:
1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the envelope feeder. 4 Contact Customer Support. • Press to clear the message and print without using the envelope feeder.
The printer settings are being configured. Wait for the message to clear.
Remove any remaining packaging material from the specified location.
Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove the stack of paper from the standard exit bin.
Understanding printer messages

Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, press .
Try one or more of the following:
Wait for the message to clear.
Wait for the message to clear.
Resetting without replacing may affect print quality.
You selected No from the “Verify PC unit replaced” screen. Wait for the message to clear.
Wait for the message to clear.
When factory default settings are restored:
Try one of the following:
x represents the number of jobs being restored. y represents the total number of jobs to be restored.
Try one or more of the following:
Understanding printer messages

The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared.
The printer is using a serial cable connection. The serial port is the active communication link.
Try one or more of the following:
Load the specified staple cartridge into the finisher to clear the message and continue stapling.
Load the specified staple cartridge in the finisher to clear the message.
Remove the stack of paper from the standard exit bin to clear the message.
Wait for the message to clear.
The printer is now in a lockout mode because:
Note: There is a defined limit on the number of login attempts. Once the limit is reached, this message appears and the printer enters a lockout mode. The message remains on the printer control panel, and any further attempts to enter menus is denied until the defined time out expires. The time out duration is set by your system support person.
Understanding printer messages

Wait for the message to clear once the time out expires, and then:
Try one or more of the following:
Load paper in the tray to clear the message.
Load paper in the specified tray to clear the message.
Insert the specified tray into the printer.
An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a supported one.
Remove the unrecognized USB device.
Remove the unrecognized USB hub.
The printer is using a USB cable connection. The USB port is the active communication link.
Try one or more of the following:
This message shows the current level of supplies.
Understanding printer messages

The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data.
Try one or more of the following:
Remove the print cartridge, and then install a supported one.
Remove the defective print cartridge, and then install a new one.
Remove the print cartridge, and then install a supported one.
Try one or more of the following:
Try one or more of the following:
Understanding printer messages

Try one or more of the following:
Try one or more of the following:
The printer deleted some held jobs in order to process current jobs.
Press the arrow buttons until Continue appears, and then press to clear the message.
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the arrow buttons until Continue appears, and then press to clear the message.
Try one or more of the following:
Try one or more of the following:
Understanding printer messages

Install a print cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:
2 Europe, the Middle East, and Africa
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:

is the number of the serial option.
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
is a slot on the printer system board.
Try one or more of the following:
1 Turn the printer power off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option card from the printer system board.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer power back on.
is the number of the parallel port.
Try one or more of the following:
The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.
Understanding printer messages

is the number of the serial port.
Try one or more of the following:
The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item is not set to Disabled.
Try one or more of the following:
The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.
Try one or more of the following:
The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.
Since the time the jobs were stored on the printer hard disk something has changed in the printer to invalidate the held jobs. Possible changes include:
Press the arrow buttons until Continue appears, and then press to clear the message.
1 Turn the printer power off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional bins.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer power back on.
Understanding printer messages

1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the extra disks.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
Only options designed specifically for this printer are supported.
Try one or more of the following:
Only options designed specifically for this printer are supported.
Try one or more of the following:
Understanding printer messages

Only options designed specifically for this printer are supported.
Try one or more of the following:
Only options designed specifically for this printer are supported.
Try one or more of the following:
Try one or more of the following:
Try one or more of the following:
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
The toner is low. Replace the print cartridge, and then press to clear the message and continue printing.
The toner is low. Replace the print cartridge, and then press to clear the message and continue printing.
Understanding printer messages

The print cartridge is exhausted.
1 Replace the print cartridge.
2 Press to clear the message.
1 Clear the paper path.
2 After clearing the paper path, press to continue printing.
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.
Understanding printer messages

Periodically, certain tasks are required to maintain optimum print quality.
1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove paper from the standard exit bin.
3 Dampen a clean, lint-free cloth with water.
4 Wipe only the outside of the printer, making sure to include the standard exit bin.
5 Make sure the paper support and standard exit bin are dry before beginning a new print job.
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Do not expose supplies to:
There are some settings you can change from the printer control panel that will help you conserve toner and paper. For more information, see “Supplies menu,” “Quality menu,” and “Finishing menu.”
If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy before printing the remaining copies.
Maintaining the printer

A message appears on the display when a replacement supply item is needed or when maintenance is required.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press the arrow buttons until Status/Supplies appears, and then press .
3 Press the arrow buttons until View supplies appears, and then press .
The status of each supply appears.
1 Type the printer IP address into the address field of your Web browser.
2 Click Device Status. The Device Status page appears, displaying a summary of supply levels.
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.
When 88 Cartridge low appears or when the print becomes faded, you may be able to extend the life of the print cartridge:
1 Remove the print cartridge.
2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3 Reinsert the cartridge and continue printing.
Maintaining the printer


Maintaining the printer

When 80 Routine maintenance needed appears, order a maintenance kit. The maintenance kit contains all the items necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
Part name Part number
Maintenance kit 40X4723 (100 V T1 fuser) 40X4724 (110 V T1 fuser) 40X4765 (220 V T1 fuser) 40X4766 (100 V T2 fuser) 40X4767 (110 V T2 fuser) 40X4768 (220 V T2 fuser)
When toner fog or background shading appears on printed pages, order replacement charge rolls.
Part name Part number
Charge roll assembly 40X5852
To check the fuser type (T1 or T2) installed in the printer, remove the print cartridge to view the label on the fuser.
Part name Part number
T1 fuser 40X1870 (100 V) 40X4418 (110 V) 40X1871 (220 V)
T2 fuser 40X1872 (100 V) 40X1873 (110 V) 40X1874 (220 V)
When Replace wiper appears on the display, order a fuser wiper.
Part name Part number
Fuser wiper 40X4417 · Maintaining the printer

When the paper fails to properly feed from the tray, order new pick rollers.
Part name Part number
When Staples Low or Staples Empty appears, order the specified staple cartridge.
For more information, see the illustrations inside the stapler door.
Part name Part number
Staple Cartridges–3 pack 25A0013
When toner smudges appear on the front or back of printed pages, order a replacement transfer roller.
Part name Part number
Transfer roll assembly 40X1886
To return Lexmark products to Lexmark for recycling:
1 Visit our Web site at www.lexmark.com/recycle.
2 Find the product type you want to recycle, and then select your country from the list.
3 Follow the instructions on the computer screen.
Remove all printer options before moving the printer.
Pick rollers 40X4308 · Maintaining the printer


The printer and options can be safely moved to another location by following these precautions:
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Maintaining the printer

Finding advanced networking and administrator information
This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com
If the printer is installed on a network, the Embedded Web Server is available for a range of functions including:
To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.
Using the Embedded Web Server, you can view paper tray settings, the level of toner in the print cartridge, the percentage of life remaining in the maintenance kit, and capacity measurements of certain printer parts. To view the device status:
1 Type the printer IP address in the address field of your Web browser.
2 Click Device Status.
You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.
Administrative support

To set up e-mail alerts:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Under Other Settings, click E-mail Alert Setup.
4 Select the items for notification, and type in the e-mail addresses.
5 Click Submit.
You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.
To view reports from a network printer:
1 Type the printer IP address into the address field of your Web browser.
2 Click Reports, and then click the type of report you want to view.
Available settings range from 1–240 minutes. The factory default is 30 minutes.
To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings, and then click General Settings.
3 Click Timeouts.
4 In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters Power Saver mode.
5 Click Submit.
Administrative support

1 Make sure the printer is on and Ready appears.
2 Press .
3 Press the arrow buttons until Settings appears, and then press .
4 Press the arrow buttons until General Settings appears, and then press .
5 Press the arrow buttons until Timeouts appears, and then press .
6 Press the arrow buttons until Power Saver appears, and then press .
7 Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver mode, and then press .
If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings. For more information, see “Printing a menu settings page” on page 37.
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Factory Defaults appears, and then press .
5 Press the arrow buttons until Restore Now appears, and then press .
Restoring Factory Defaults appears.
Administrative support

Solving basic problems
If there are basic printer problems, or the printer is unresponsive, make sure:
Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.
The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.
If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.
These are possible solutions. Try one or more of the following:
Make sure the printer and computer are turned on and connected to the same network.
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.
Troubleshooting

The documents contain unavailable fonts.
1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon.
The Print dialog appears.
3 Select Print as image.
4 Click OK.
Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.
These are possible solutions. Try one or more of the following:
Make sure Ready or Power Saver appears on the display before sending a job to print.
Remove the stack of paper from the standard exit bin.
Load paper in the tray.
Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.
Troubleshooting

MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLE
For more information, visit the Lexmark Web site at www.lexmark.com.
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.
These are possible solutions. Try one or more of the following:
The print job may contain a formatting error or invalid data.
Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.
These are possible solutions. Try one or more of the following:
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Setup Menu appears, and then press .
4 Press the arrow buttons until Print Recovery appears, and then press .
5 Press the arrow buttons until Page Protect appears, and then press .
6 Press the arrow buttons until Off appears, and then press .
Troubleshooting

C HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
MAKE SURE THE PRINTER IS NOT IN HEX TRACE MODE
If Ready Hex appears on the display, then you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.
These are possible solutions. Try one or more of the following:
USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS
These are possible solutions. Try one or more of the following:
From the Finishing menu or Print Properties, set Collate to On.
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.
Troubleshooting

Add printer memory or an optional hard disk.
Increase the Print Timeout value:
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Setup Menu appears, and then press .
4 Press the arrow buttons until Timeouts appears, and then press .
5 Press the arrow buttons until Print Timeout appears, and then press .
6 Press the arrow buttons until the value you want appears, and then press .
Settings chosen from the software program or application can change or override settings chosen from the printer control panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control panel.
These are possible solutions. Try one or more of the following:
Turn the printer off, wait about 10 seconds, and then turn the printer on.
1 Turn the printer off.
2 Unplug the printer.
3 Check the connection between the option and the printer.
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or go to www.lexmark.com/publications to view the option instruction sheet.
From the computer you are printing from, select the option. For more information, see “Updating available options in the printer driver” on page 39.
Troubleshooting

These are possible solutions. Try one or more of the following:
1 Open the paper tray.
2 Check for paper jams or misfeeds.
3 Make sure paper guides are aligned against the edges of the paper.
4 Make sure the paper tray closes properly.
Turn the printer off, wait about 10 seconds, and then turn the printer on.
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
These are possible solutions. Try one or more of the following:
These are possible solutions. Try one or more of the following:
Turn the printer off, wait about 10 seconds, and then turn the printer on.
1 Adjust the envelope support for the length of envelope you are using.
2 For more information, see “Loading the envelope feeder” on page 62.
Troubleshooting

Make sure the paper type and paper size settings match the envelopes you are using:
1 From the printer control panel, check the settings for the envelope feeder from the Paper menu.
If the envelope feeder is listed on the menu settings page, but an envelope jams when it enters or exits the feeder, then it may not be properly installed. Reinstall the envelope feeder. For more information, see the hardware setup documentation that came with the envelope feeder, or go to www.lexmark.com/publications to view the envelope feeder instruction sheet.
If the duplex unit is listed on the menu settings page, but paper jams when it enters or exits the duplex unit, then it may not be properly installed. Reinstall the duplex unit. For more information, see the hardware setup documentation that came with the duplex unit, or go to www.lexmark.com/publications to view the duplex unit instruction sheet.
If the 5-bin mailbox is listed on the menu settings page, but paper jams when it exits the printer and enters the mailbox, then it may not be properly installed. Reinstall the 5-bin mailbox. For more information, see the hardware setup documentation that came with the 5-bin mailbox, or go to www.lexmark.com/publications to view the 5-bin mailbox instruction sheet.
If the Output Expander, High Capacity Output Expander, or StapleSmart II Finisher is listed on the menu settings page, but paper jams when it exits the printer or enters the output option, then it may not be properly installed. Reinstall the option. For more information, see the hardware setup documentation that came with the option, or go to www.lexmark.com/publications to view the option instruction sheet.
Make sure the memory card is securely connected to the printer system board.
Make sure the flash memory card is securely connected to the printer system board.
Make sure the hard disk is securely connected to the printer system board.
Troubleshooting

If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or more of the following:
Make sure you are using the correct cable and that it is securely connected.
For information about installing software for network printing, see the Networking Guide on the Software and Documentation CD
These are possible solutions. Try one or more of the following:
Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.
MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.
Move the guides in the tray to the correct positions for the paper size loaded.
The paper path is not clear. Clear jammed paper from the entire paper path, and then press .
Troubleshooting

Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1 Press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Print Recovery appears, and then press .
5 Press the arrow buttons until Jam Recovery appears, and then press .
6 Press the arrow buttons until On or Auto appears, and then press .
To help isolate print quality problems, print the print quality test pages:
1 Turn the printer off.
2 From the printer control panel, press and hold and the right arrow button while turning the printer on.
3 Release both buttons when Performing Self Test appears.
The printer performs its power-on sequence, and then Config Menu appears.
4 Press the down arrow button until Prt Quality Pgs appears, and then press .
The pages are formatted, Printing Quality Test Pages appears, and then the pages print. The message remains on the printer control panel display until all the pages print.
5 After the print quality test pages print, press the down arrow button until Exit Config Menu appears, and then press .
The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, then call for service. You may have a printer part that requires adjustment or replacement.
These are possible solutions. Try one or more of the following:
Troubleshooting

Remove the print cartridge and make sure the packing material is properly removed. Reinstall the print cartridge.
When 88 Cartridge low appears, order a new print cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
These are possible solutions. Try one or more of the following:
Move the width and length guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
ABCDE ABCDE ABCDE ABCDE ABCDE
ABCDE
C HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
Troubleshooting

ABCDE
ABCDE ABCDE
C HECK THE T ONER D ARKNESS SETTING
Select a lighter Toner Darkness setting:
These are possible solutions. Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
Troubleshooting

These are possible solutions. Try one or more of the following:
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
These are possible solutions. Try one or more of the following:
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
Avoid textured paper with rough finishes.
Troubleshooting

When 88 Cartridge low appears or when the print becomes faded, replace the print cartridge.
Replace the fuser.
These are possible solutions. Try one or more of the following:
The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.
Avoid textured paper with rough finishes.
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
Replace the print cartridge.
Troubleshooting

These are possible solutions. Try one or more of the following:
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
Avoid textured paper with rough finishes.
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
When 88 Cartridge Low appears, order a new print cartridge.
Replace the print cartridge.
Troubleshooting

R EPEATING MARKS OCCUR EVENLY DOWN THE PAGE
Replace the charge rolls if the defects occur every 28.3 mm (1.11 in.).
Replace the transfer roller if the defects occur every 51.7 mm (2.04 in.).
Replace the print cartridge if the defects occur every:
Replace the fuser if the defects occur every:
These are possible solutions. Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure you are using paper that meets the printer specifications.
These are possible solutions. Try one or more of the following:
If the fill pattern is incorrect, then choose a different fill pattern from your software program or application.
Troubleshooting

Remove the print cartridge and shake it from side to side to redistribute the toner, and then reinstall it.
Replace the used print cartridge with a new one.
These are possible solutions. Try one or more of the following:
Remove the print cartridge and shake it from side to side to redistribute the toner, and then reinstall it.
Replace the used print cartridge with a new one. If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
ABCDE ABCDE ABCDE
These are the possible solutions. Try one or more of the following:
Troubleshooting

Select another tray or feeder to feed the paper for the job:
Replace the print cartridge.
Check the paper path around the print cartridge.
Clear any paper you see.
Contact Customer Support.
ABCDE ABCDE ABCDE
These are possible solutions. Try one or more of the following:
Select another tray or feeder to feed paper for the job:
Replace the print cartridge.
Troubleshooting

Check the paper path around the print cartridge.
Clear any paper you see.
Contact Customer Support.
These are possible solutions. Try one or more of the following:
Replace the print cartridge.
Replace the charge rolls.
Clean any toner from the paper path. If the problem persists, then contact Customer Support.
These are possible solutions. Try one or more of the following:
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
Troubleshooting

From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray.
These are possible solutions. Try one or more of the following:
Replace the print cartridge.
Clean any toner from the paper path. If the problem persists, then contact Customer Support.
Try one or more of the following:
Use only transparencies recommended by the printer manufacturer.
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.
You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.
Troubleshooting

In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at www.lexmark.com.
Troubleshooting

Product name:
Lexmark T650, Lexmark T652, Lexmark T654
Machine type:
Model(s):
01A, 010, 21A, 210, 23A, 230, 41A, 410, 43A, 430
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA
© 2008 Lexmark International, Inc.
All rights reserved.
October 2008

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
MarkTrack, PrintCryption, and StapleSmart are trademarks of Lexmark International, Inc.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.
The following terms are trademarks or registered trademarks of these companies:
Albertus The Monotype Corporation plc
Antique Olive Monsieur Marcel OLIVE
Apple-Chancery Apple Computer, Inc.
Arial The Monotype Corporation plc
CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation
Chicago Apple Computer, Inc.
Clarendon Linotype-Hell AG and/or its subsidiaries
Geneva Apple Computer, Inc.
GillSans The Monotype Corporation plc
Helvetica Linotype-Hell AG and/or its subsidiaries
Hoefler Jonathan Hoefler Type Foundry
ITC Avant Garde Gothic International Typeface Corporation
ITC Bookman International Typeface Corporation
ITC Mona Lisa International Typeface Corporation
ITC Zapf Chancery International Typeface Corporation
Joanna The Monotype Corporation plc
Monaco Apple Computer, Inc.
New York Apple Computer, Inc.
Eurostile Nebiolo · Marigold Arthur Baker · Oxford Arthur Baker

Palatino Linotype-Hell AG and/or its subsidiaries
Stempel Garamond Linotype-Hell AG and/or its subsidiaries
Times New Roman The Monotype Corporation plc
Univers Linotype-Hell AG and/or its subsidiaries
All other trademarks are the property of their respective owners.
information statement
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.
Taffy Agfa Corporation

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, Inc., S.A., Boigny, France.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
The following notices are applicable if your printer has a wireless network card installed
The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
The following notices are applicable if your printer has a wireless network card installed.
This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.
Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.
Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.
En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.
Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.
Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb
Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France.
This product satisfies the limits of EN 55022; safety requirements of EN 60950; radio spectrum requirements of ETSI EN 300 328; and the EMC requirements of EN 55024, ETSI EN 301 489-1 and ETSI EN 301 489-17.
Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.
Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.
Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.
Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.
Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.
Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.
Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky príslušné ustanovenia smernice 1999/5/ES.
Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA
Printing 53 dBA for T650, 54 dBA for T652, 55 dBA for T654
Values are subject to change. See www.lexmark.com for current values.
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Ready 30 dBA

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
A laser notice label may be affixed to this printer as shown:
The following table documents the power consumption characteristics of the product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs.
T650: 640 W (simplex), 540 W (duplex); T652: 725 W (simplex), 565 W (duplex); T654: 740 W (simplex), 575 W (duplex)
Copying The product is generating hard-copy output from hard-copy original documents.
Scanning The product is scanning hard-copy documents. N/A
Ready The product is waiting for a print job. T650: 80 W; T652: 85 W; T654: 85 W
Power Saver The product is in energy-saving mode. T650: 12 W; T652: 13 W; T654: 14 W
Off The product is plugged into a wall outlet, but the power switch is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 30

By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
Lexmark T650, Lexmark T652, Lexmark T654
This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
Lexmark warrants that this product:
—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
—Is, during normal use, free from defects in material and workmanship
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.
The replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.
Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com.
Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.
Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
Warranty service does not include repair of failures caused by:
—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.
PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.
1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRATIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.
This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.
The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.
IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENCE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you.

5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this Software License Agreement:
a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,
executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or
installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this Software License Agreement. d Freeware. Notwithstanding the terms and conditions of this Software License Agreement, all or any portion
of the Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download or installation. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this Software License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these Software License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this Software License Agreement. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program or assist or otherwise facilitate others to do so, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program. 9 ADDITIONAL SOFTWARE. This Software License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This Software License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this Software License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form.

11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Software License Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Software License Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Software License Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program are as set forth in this Software License Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this Software License Agreement electronically. This means that when you click the “Agree” or “I accept” button on this page or use this product, you acknowledge your agreement to these Software License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this Software License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This Software License Agreement (including any addendum or amendment to this Software License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this Software License Agreement (except to the extent such extraneous terms do not conflict with the terms of this Software License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this Software License Agreement, the terms of this Software License Agreement shall control.
1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.om/fwlink/?LinkId=52369. 2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fwlink/?LinkId=83288.






Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.