
Setup Guide
October 2002

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800- 553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
It may help you to recognize the caution, warning, and note conventions used in this book. These appear in the left column for easy reference.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
damage your printer hardware or software. Note: A note provides information you may find useful.
PCL® is a registered trademark of the Hewlett-Packard Company.
PostScript® is a registered trademark of Adobe Systems Incorporated.
Other trademarks are the property of their respective owners.
© Copyright 2002 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any questions on this statement should be directed to:
Director of Lexmark Technology and Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 Refer to the Lexmark E321, E323 Publications CD for more details.
Safety information · Conventions · FCC emissions information


About the printer Your printer is available in three models: the Lexmark™E321, the Lexmark E323, and the Lexmark E323n. The differences between these three models are listed in the following table.
Introduction




Lexmark E321 and Lexmark E323 Lexmark E323n
Power switch Power cord connector Power switch
Other sources of information If you need more information after you have completed setup, refer to the other printer documentation.

Publications CD The Publications CD, which is packaged with the Setup Guide, provides information about choosing media, understanding the operator panel lights, clearing paper jams, and solving printing problems.
The information on the Publications CD is also available on Lexmark’s Web site at www.lexmark.com/publications
Quick Reference card The printer Quick Reference card provides easy access to information about loading paper, clearing jams, and understanding common operator panel light messages.
Drivers CD The drivers CD contains the necessary printer drivers to get your printer up and running.
It may also contain printer utilities, screen fonts, and additional documentation.
Lexmark’s Web site Visit our Web site at www.lexmark.com for updated printer drivers, utilities, and other printer documentation.
Introduction

1 Select a location for your printer.


If any items are missing or damaged, refer to the Publications CD for the designated Lexmark support phone number for your country.
Save the carton and packing material in case you need to repack the printer.
Attaching an operator panel overlay If you have a non-English operator panel overlay in your printer box and want to use it, peel it off, align it on the operator panel, and press it into place.
Unpack the printer

sheet drawer
You can increase paper capacity with the optional 250-sheet drawer, which attaches underneath the printer.
A drawer consists of a tray and a support unit.
1 Remove the tray from the support unit. 2 Remove all packing material and tape from the tray and the support unit. 3 Place the support unit in the location you have chosen for your printer.
Install the optional 250-sheet drawer
Support unit · Tray

4 Align the printer with the front of the support unit and place it on top of the support unit.

Make sure the support unit is firmly in place.
When you complete setting up the printer, print a menu settings page to verify the 250-sheet drawer is listed under Installed Features (see page 35).
5 Insert the tray.

Install the optional 250-sheet drawer

Installing the print cartridge
1 Use the finger tab to pull down the printer cover.

2 Grasp the cartridge handle and pull the print cartridge straight up. 3 Remove the protective foam packaging from the print cartridge. Cartridge handle

Install printer supplies

4 Pull off the plastic piece attached to the ends of the print cartridge.
Discard the plastic piece, foam and paper.
5 Shake the cartridge to distribute the toner evenly.
Install printer supplies


a Align the colored arrows on
either side of the cartridge with the corresponding arrows in the printer.
b Holding the cartridge by the
handle, tilt the cartridge down and guide it between the print cartridge grooves.
c Push down on the cartridge
until it is firmly in place.
7 Close the printer cover.


Install printer supplies

You can customize your printer memory capacity and connectivity by adding optional cards.
Removing the printer side cover Before installing any memory options, you must remove the printer side cover.
1 Open the printer front cover.
Install memory cards

2 Firmly push in the two oval tabs as you pull open the side cover.

3 Gently pull off the cover and set it aside.

Install memory cards

Removing the system board shield Use a No. 2 Phillips screwdriver to remove the system board shield.
1 Remove the top screw and set it aside. 2 Loosen the bottom three screws, but do not remove them.

3 Slide the system board shield along the top and bottom grooves and set it aside.

Installing a memory card Follow the instructions in this section to install either a printer memory card or, if you have a Lexmark E323 or Lexmark E323n, a flash memory card.
The system board has two connectors for optional memory cards.You can install a card in either connector.
Install memory cards

1 Complete the steps in “Removing the system board shield” on page 10. 2 Unpack the printer memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
3 Align the notches on the bottom of the card with the notches on the connector. 4 Guide the card between the latches on each end of the connector and push the card firmly into the connector. 5 Make sure each latch fits over the notch on each end of the memory card.

6 Reattach the metal shield and side cover. See page 12 for instructions.
Connection points Notches · Install memory cards

1 Align the metal shield between the top and bottom grooves and slide it all the way back.

2 Tighten the bottom three screws and reattach the top screw to keep the shield in place.

Install memory cards

1 Align the top and bottom tabs with the corresponding slots. 2 As you close the printer side cover, push the oval tabs firmly into the slots. 3 Close the printer front cover.

Tab · Tab · Install memory cards

Your printer has two standard paper sources: tray 1, which holds up to 150 sheets of plain paper, and a single-sheet manual feed. Use tray 1 for most print jobs. Use the manual feed to feed a single page, transparency, envelope, label, or card stock.

You can increase your printer paper capacity with the optional 250-sheet tray.
An output bin on top of the printer holds up to 100 sheets. The single-sheet front output door provides a straight-through paper path for special media, reducing curling and potential paper jams.
The following table lists page numbers where you can find loading instructions for each tray.

Paper sizes supported Paper types supported Go to page...
Tray 1 150 A4, A5, B5, letter, legal, executive, folio
Manual feed 1 Plain paper, transparencies, envelopes, labels, card stock

Loading tray 1 Use tray 1, which is behind the manual feed, to feed paper and special media.
Tray 1 holds up to 150 sheets of paper, 10 sheets of transparencies or labels,10 envelopes,10 sheets of card stock.
1 Extend the rear paper support until you hear a click.
2 Flex the sheets back and forth to loosen them, fan the sheets on all four sides, and flex them again.
Load paper

To reduce paper jams, do not use envelopes that:
– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossing – Use metal clasps, string ties, or metal folding bars – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed position
Load paper

4 Extend the front paper support on the top output bin until you hear a click. 5 If you are printing on legal size paper, completely extend the front paper support. 6 Open the front output door for a straight-through paper path if you are printing on special media.

7 Slide the paper guides against the edges of the paper or envelopes. 8 Select the paper size and type from your software application. 9 Select the number of copies from your software application or printer driver if you are printing multiple copies. 10 Start your print job.

Load paper

1 Grasp the tabs on either side of the tray and pull it completely out of the printer.

2 Make sure the metal plate is pressed down before inserting the tray into the printer.

After the tray is inserted, the metal plate springs back up so the paper can feed into the printer.
Load paper

3 If loading A4 or legal size paper, extend the paper support on the front of the tray.
4 Flex the sheets back and forth to loosen them, fan the sheets on all four sides, and flex them again. 5 If loading letterhead paper, insert letterhead face down with the top of the page entering the printer first.
Load paper

. 6 Make sure the paper is under both corner bucklers and lying flat in the tray.

7 Slide the paper guides flush against the edges of the paper.

Load paper

8 Reinstall the tray, making sure it is pushed all the way in. 9 Select the paper size and type from your software application. 10 Start your print job.

Loading the manual feed Use the manual feed to feed media, one sheet at a time, into your printer.
If you experience problems feeding envelopes or card stock in tray 1, try printing them one at a time from the manual feed.

1 Extend the front paper support on the top output bin until you hear a click. 2 If you are loading legal paper, extend the front paper support all the way up. 3 Open the front output door if you are printing on special media. 4 If loading:
Load paper

To reduce paper jams, do not use envelopes that:
– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossing – Use metal clasps, string ties, or metal folding bars – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed position 5 Slide the paper guides flush against the edges of the paper or envelope. 6 Select the paper size and type from your software application. 7 Start your print job. 8 Press and release Continue to start printing.
Load paper

9 When the Load Paper light and the Press Continue light come on, place another piece of media in the manual feed. 10 Press and release Continue to print another page.

The printer can be attached to a network or directly to a computer to print locally.
You can attach your printer locally using either a USB or parallel connection.
USB cable A USB port is standard on most base models.
Windows 98 SE, Windows Me, Windows 2000, and Windows XP operating systems support USB connections. Some UNIX, Linux, and Macintosh computers also support USB connections. Refer to your computer operating system documentation to see if your system supports USB.
To attach the printer to a computer:
1 Connect the printer to the computer using a USB or parallel cable.
Be sure to match the USB symbol on the cable to the USB symbol on the printer.
A USB port requires a USB cable such as Lexmark part number 12A2405 (2 m [6.5 ft]). Be sure to match the USB symbol on the cable to the USB symbol on the printer. 2 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 3 Turn on your printer.
After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs.
Attach cables

If you see a message other than Ready on the display, refer to the publications CD for instructions on clearing the message. Click Printing, and then click Understanding printer messages. 4 Turn on your computer and any other peripherals. 5 Go “Install drivers for local printing” on page 27.
Parallel cable A parallel port requires an IEEE-1284 compliant parallel cable such as Lexmark part number 1329605 (3 m [10 ft]) or 1427498 (6 m [20 ft]).
You can attach your Lexmark E323n printer to a network using standard network cables.
Ethernet cable A 10BaseT/100BaseTx Fast Ethernet port is standard on the network model.
To attach the printer to a network:
1 Make sure the printer is turned off and unplugged. 2 Plug one end of the standard network cable into a LAN drop or hub and the other end into the Ethernet port on the back of the printer. The printer automatically adjusts for the network speed. 3 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 4 Now turn on the printer.
Use Category 5 cable with an RJ-45 connector for the standard network port.
After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs.
Attach cables

5 Turn on your computer and any other peripherals. 6 Continue with “Verify printer setup” on page 35.
Attach cables

printing
A local printer is a printer attached to your computer using a USB or parallel cable. If your printer is attached to a network instead of your computer, skip this step and go to Step 8: “Verify printer setup” on page 35.
A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers depends on the operating system you are using.
Select your operating system and cable from the table below for driver installation instructions.
Operating system Cable Go to page...
Windows XP USB* or Parallel 28
Windows 2000 USB* or Parallel 29
Windows Me USB* or Parallel 29
Windows 98 USB* or Parallel 30
Windows NT 4.x Parallel only 31
Windows 95 Parallel only 31
Macintosh USB only 32
*If you attach a USB printer cable while your printer and computer are turned on, the Windows hardware wizard launches immediately. Find the instructions for your operating system and use them to answer the plug and play screens.
Install drivers for local printing
UNIX/Linux USB 33

Windows In addition to the following driver installation instructions, you may need to refer to the documentation that shipped with your computer and your Windows software.
Before you install Some versions of Windows software may already include a system printer driver, so installation is automatic in later versions of Windows. System drivers work well for simple print jobs, but they contain less functionality than our enhanced custom driver.
To obtain all the features of the custom driver, install the custom printer driver using the driver CD that shipped with the printer.
Drivers are also available in downloadable software packages on Lexmark’s Web site at www.lexmark.com
When the Found New Hardware Wizard screen appears:
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next.
2 Browse to the location of the printer driver on the drivers CD, and then click Next.
D:\drivers\win_2000\ 3 Disregard the next two messages and click Continue Anyway. Your printer has been thoroughly tested and is compatible with Windows XP. The wizard copies all of the necessary files and installs the printer driver. 4 Click Finish when the software is installed. 5 Print a test page to verify printer setup
a Click Start Settings Printers.
b Select the printer you just created.
c Click File Properties.
d Click Print Test Page. When a test page prints successfully,
printer setup is complete.
Install drivers for local printing

When the Found New Hardware Wizard screen appears:
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next.
2 Select Search for a suitable driver, and click Next. 3 Select only Specify a location, and click Next. 4 Browse to the location of the printer driver on the drivers CD.
D:\Drivers\Win_2000\ 5 Click Open, and then click OK. 6 Click Next to install the driver that is displayed. Disregard the message that the driver is not digitally signed. 7 Click Finish when the software is installed. 8 Print a test page to verify printer setup
a Click Start Settings Printers.
b Select the printer you just created.
c Click File Properties.
d Click Print Test Page. When a test page prints successfully,
printer setup is complete.
You must install both a USB port driver and an enhanced custom print driver.
When the Found New Hardware Wizard screen appears.
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next. 2 Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a USB port driver. The name of it will be similar to your printer name. 3 After the USB port driver is found, click Finish. 4 Select Automatic search for the best driver (recommended), and then click Next. The wizard now searches for a printer driver.
Install drivers for local printing

5 Select your printer and driver from the list, and then click OK. Make sure you select the driver in the correct language you want to use.
D:\Drivers\WIN_9X\<LANGUAGE> 6 After the printer driver is installed, click Finish. 7 Use the default printer name or type a unique name for your printer, and then click Next. 8 Click Yes (recommended), and then click Finish to print a test page. 9 After the test page prints, click Yes to close the window. 10 Click Finish to complete the installation and close the wizard. You are now ready to print.
You must install both a USB port driver and an enhanced custom print driver.
When the Add New Hardware Wizard screen appears:
1 Insert the drivers CD, and then click Next. If the CD auto launches, exit the CD. 2 Select Search for the best driver for your device (recommended), and then click Next. 3 Select only CD-ROM drive, and then click Next. 4 After the wizard finds the USB port driver, click Finish. 5 Select to install the updated driver (recommended), and then click Next. 6 Select Specify a location and browse to the location of the printer driver on the drivers CD, and then click OK.
D:\Drivers\WIN_9X\<language> 7 Select to install the updated driver (recommended), and then click Next. 8 After the printer driver is installed, click Finish. 9 Use the default printer name or type a unique name for your printer, and then click Next.
Install drivers for local printing

10 Select Yes to print a test page, and then click Finish. All the necessary files are installed on your computer. 11 After the test page prints, click Yes to close the message window. 12 Click Finish to complete the installation. You are now ready to print.
The easiest way to install a driver is to use the drivers CD that shipped with your printer.
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next. 2 Click Install Printer Software.
3 Click Agree to accept the license agreement. 4 Select Local Printer and click Next. 5 Make sure the correct printer and port are listed, and click OK. You are now ready to print.
When the Update Device Driver Wizard screen appears:
1 Insert the drivers CD. If the CD auto launches, exit the CD.
If a system-compatible driver is found on your operating system, the Wizard installs it.
If no compatible system driver is found on your operating system, click Other Locations.
2 Browse to the location of the printer driver on the drivers CD, and click OK.
D:\drivers\win_9x\english 3 Click Finish. The Add Printer Wizard screen appears. 4 Use the default printer name or type a unique name for your printer, and then click Next. 5 Click Yes to print a test page. 6 Click Finish. A test page is sent to the printer once the driver files are copied to your computer. You are now ready to print.
Install drivers for local printing

Macintosh Macintosh OS 8.6 or later is required for USB printing. To print locally to a USB-attached printer you must create a desktop printer icon (Macintosh 8.6–9.x) or create a queue in Print Center (Macintosh OS X).
1 Install a printer PostScript Printer Description (PPD) file on your computer.
a Insert the drivers CD.
b Double-click Classic, and then double-click the installer
package for your printer.
c Choose the language you want to use and click OK.
d Click Accept after you read the license agreement.
e Click Continue after you finish with the Readme file.
f Choose a default paper size.
g On the Easy Install screen, click Install. All the necessary
files are installed on your computer.
h Click Quit when installation is complete.
Macintosh 8.6 - 9.0: Open Apple LaserWriter.
Macintosh 9.1 - 9.x: Open Applications, and then Utilities. 3 Double-click Desktop Printer Utility. 4 Select Printer (USB), and then click OK. 5 In the USB Printer Selection section, click Change.
If your printer does not appear in the USB Printer Selection list, make sure the USB cable is properly connected and the printer is turned on. 6 Select the name of your printer, and then click OK. Your printer appears in the original Printer (USB) window. 7 In the PostScript Printer Description (PPD) File section, click Auto Setup. Make sure your printer PPD now matches your printer. 8 Click Create, and then click Save.
Install drivers for local printing

9 Specify a printer name, and then click Save. Your printer is now saved as a desktop printer.
1 Install a printer PostScript Printer Description (PPD) file on your computer.
a Insert the drivers CD.
b Double-click Mac OS X, and then double-click the installer
package for your printer.
c On the Authorization screen, choose Click the lock to make
changes.
d Enter your password, and then click OK.
e Click Continue on the Welcome screen and again after you
view the Readme file.
f Click Agree to accept the license agreement.
g Select a Destination, and then click Continue.
h On the Easy Install screen, click Install. All the necessary
files are installed on your computer.
i Click Close when installation is complete. 2 Open Finder, click Applications, and then click Utilities. 3 Double-click Print Center.
If your USB-attached printer appears in the Printer List, you can quit Print Center. A queue has been created for your printer.
If your USB-attached printer does not appear in the Printer List, make sure the USB cable is properly connected and the printer is turned on. After the printer appears in the Printer List, you can quit Print Center.
UNIX/Linux Your printer supports local printing on many UNIX and Linux platforms, such as Sun Solaris and Red Hat.
The Sun Solaris and Linux packages are available on the drivers CD and on the Lexmark Web site at www.lexmark.com The User’s Guide
Install drivers for local printing

in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
All the printer driver packages support local printing using a parallel connection. The driver package for Sun Solaris supports USB connections to Sun Ray appliances and Sun workstations.
Visit the Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Install drivers for local printing

Turning on the printer
1 Plug one end of the printer cord into the power cord connector at the back of the printer and the other end into a properly grounded outlet. 2 Turn on the printer.
All indicator lights cycle (each light blinks, from top to bottom, and then cycles again).
Print a Menu Settings page for a list of current printer settings. If you have a Lexmark E323n, your printer prints both a Menu Settings page and a Network Setup page, listing the IP address and other network settings.
1 Press and release Continue to print the page(s). 2 On the Menu Settings page:
If an option you installed is not listed on the Menu Settings page, turn the printer off, unplug the power cord, and reinstall the option.
If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another Network Setup page to verify that you are connected to your network.
Save the network setup page for later use.
Verify printer setup

Task Go to page…
Configure for TCP/IP 37
Distribute information to users 42
Verify printer setup

If you have TCP/IP available on your network, we recommend that you assign an IP address to the printer.
If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the printer.
1 Look for the address under the “TCP/IP” heading on the Network Setup page you printed in “Printing setup pages” on page 35. 2 Go to “Verifying the IP settings” on page 38 and begin with step 2.
If your network is not using DHCP, then you must manually assign an IP address to the printer.
One of the easiest ways is to use the Print Server TCP/IP Setup Utility on the drivers CD. Launch the CD, click View Documentation Network Printer Install. Look for information about using the Print Server TCP/IP Setup Utility.
To use this utility, you need to know the printer 12-digit physical address or Universally Administered Address (UAA). Look for the UAA entry on the Network Setup page you printed earlier. You can use either the MSB or canonical form of the UAA.
Configure for TCP/IP

1 Print another Network Setup page. Look under the “TCP/IP” heading and make sure the IP address, netmask, and gateway are what you expected.
See “Printing setup pages” on page 35 if you need help.
2 Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type “ping” followed by the new printer IP address (for example, 192.168.0.11):
ping xxx.xxx.x.xx
If the printer is active on the network, you receive a reply.
Configure for TCP/IP

network printing
After you have assigned and verified the TCP/IP settings, you are ready to install the printer drivers on each network computer.
Windows In Windows environments, network printers can be configured for direct printing or shared printing.
More information about each of these network printing methods is on the drivers CD that shipped with your printer.
Read the detailed instructions on the drivers CD. Click View Documentation and look for information about network printer installation for your specific Windows environment.
If you choose to install without using the instructions on the drivers CD, you need a basic understanding of network printing on TCP/IP networks, installing printer drivers, and the process involved in creating new network ports.
Install drivers for network printing

System drivers are built into Windows operating systems. Custom drivers are available on the drivers CD.
Updated system and custom drivers are available on the Lexmark Web site at www.lexmark.com
Macintosh In order to print to a network printer, each Macintosh network user must perform both of the following tasks on his computer:
A custom PPD can be found on the drivers CD that shipped with your printer.
A PPD for your printer is also available in a downloadable software package from Lexmark’s Web site at www.lexmark.com
Detailed instructions for these tasks can be found in the online documentation included on the drivers CD.
UNIX/Linux Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Visit Lexmark’s Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Install drivers for network printing

Lexmark provides a printer driver package for each supported UNIX and Linux platform. The User’s Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
You can download these packages from Lexmark’s Web site. You may also find the driver package you need on the drivers CD.
NetWare You printer supports NetWare network environments.
For the latest information about installing a network printer in a NetWare environment, launch the drivers CD and click View Documentation. Look for information about network printer installation.
Install drivers for network printing

to users
Identifying printer users
Several types of users may need access to the information stored on the publications CD:
Launch the publications CD and browse the contents to see a complete list of the available information. If you have a version of Acrobat capable of full text searching, we have created catalog entries to help you find the information you need.
The information provided on the Publications CD includes:
Distribute information to users

You can give users access to the information on the Publications CD in several ways:
Congratulations! You are now ready to use your new printer. Save this book if you anticipate purchasing printer options in the future.
Distribute information to users

The operator panel lights mean different things, depending on their sequence. They indicate that the printer is ready to print, the printer needs intervention, or the printer needs servicing.
Some of the more common light sequences are shown in the next section. For a complete explanation of all of the light sequences, refer to the Understanding the operator panel lights section of the Publications CD.
Understanding the operator panel lights

Light is blinking slowly
Understanding the operator panel lights

The printer is ready to receive and process data.
The printer is busy receiving or processing data.
Understanding the operator panel lights

The printer is waiting until additional data is received.
Tray 1 or the optional 250-sheet tray is out of media or the media did not feed properly.
Understanding the operator panel lights

The printer prompts you to load another sheet of media in the manual feed.
The printer detects a jam. Press and release Continue twice quickly to display the secondary paper jam light sequence.
Understanding the operator panel lights

The printer alerts you that the toner is getting low. To use the remaining toner, remove the print cartridge, gently shake it back and forth, and reinsert it. When the print fades or no longer prints satisfactorily, replace the print cartridge.
(On the Lexmark E321, the Toner Low light does not come on if the 1,500-page starter print cartridge is installed.)
A secondary error has occurred:
1 Quickly press and release Continue twice to display the secondary error code light sequence. 2 Refer to the Understanding the Operator Panel Lights section in the Publications CD for information on what the light sequence means and what you can do.
Understanding the operator panel lights

The printer has a service error. Turn the printer off and back on. If the lights are still blinking, contact your point of purchase.
Understanding the operator panel lights

Installing a print cartridge
Characters appear light or blurred. • The print cartridge may be low on toner. Replace the cartridge.
The printer seems to be printing, but pages are blank.
The printer is on, but nothing prints.
Jobs are not printing and the Error light is on solid.
Unexpected characters print or characters are missing.
The operator panel lights do not come on when the printer is turned on.
Toner smudges appear on the page. • Make sure the paper is straight and unwrinkled.
The paper sticks together/printer feeds multiple sheets of paper.
Attaching cables · Loading paper · Troubleshooting tips

Troubleshooting tips

Lexmark International, Inc., Lexington, KY
is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
This warranty applies to the United States and Canada. For customers outside the U.S. and Canada, refer to the country-specific warranty information that came with your printer.
The warranty period is12 months and starts on the date of original purchase as shown on the purchase receipt.
This Statement of Limited Warranty applies to this product if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this statement as “Remarketer.”
To obtain warranty service you may be required to present proof of original purchase. Warranty service will be provided at your location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product.
Lexmark warrants that this product:
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligation or restrictions that prevent its exchange.
Before you present this product for warranty service, remove all programs, data, and removable storage media.
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair without charge.
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1- 859-232-3000, or on the World Wide Web at http:// support.lexmark.com.
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was designed. To obtain warranty service, you may be required to present the feature or option with the product.
Remote technical support is provided for this product throughout its warranty period. Lexmark
If you transfer this product to another user, warranty service under the terms of this statement
Statement of Limited Warranty
Warranty service · Lexmark E321, E323 · Warranty

offers a variety of extended warranty programs that include an extension of technical support. For products no longer covered by a Lexmark warranty, technical support may only be available for a fee.
recover actual damages up to the limit set forth in the following paragraph.
Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1) $5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
We do not warrant uninterrupted or error-free operation of a product.
Warranty service does not include repair of failures caused by:
This limitation of remedies also applies to any developer of materials supplied to Lexmark. Lexmark’s and the developer’s limitations of remedies are not cumulative. Such developer is an intended beneficiary of this limitation.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.
Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this Statement of Limited Warranty, you may
Statement of Limited Warranty
Extent of warranty · Additional rights · Limitation of liability

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2002 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| Installing a print cartridge | p.59 | ||
| Characters appear light or blurred. | • The print cartridge may be low on toner. Replace the cartridge. | p.59 | |
| The printer seems to be printing, but pages are blank. | • The print cartridge has an error. Replace the cartridge. | p.59 | |
| The printer is on, but nothing prints. Jobs are not printing and the Error light is on solid. | • Make sure the print cartridge is installed. | p.59 | |
| Attaching cables | p.59 | ||
| Unexpected characters print or characters are missing. | • Make sure the parallel cable, USB cable or Ethernet cable is firmly plugged in at the back of the printer. | p.59 | |
| The operator panel lights do not come on when the printer is turned on. | • Make sure the power cord is firmly plugged in at the back of the printer and at the electrical outlet. | p.59 | |
| Loading paper | p.59 | ||
| Toner smudges appear on the page. | • Make sure the paper is straight and unwrinkled. | p.59 | |
| The paper sticks together/printer feeds multiple sheets of paper. | • Remove the paper from tray 1 or optional 250-sheet tray and fan the paper. • Do not overfill tray 1 or the optional 250-sheet tray. • Make sure the paper is under both corner bucklers and lying flat in the optional 250-sheet tray. | p.59 | |
| The paper skews or buckles. | • Do not overfill tray 1 or the optional 250-sheet tray. • Make sure the paper guides are properly positioned against the edges of the paper. | p.59 | |
| The paper fails to feed from tray 1. | • Make sure tray 1 is selected from the printer driver. • Remove the paper from tray 1 and fan the paper. | p.60 | |
| The paper fails to feed from the optional 250-sheet tray. | • Make sure optional 250-sheet tray is selected from the printer driver. • Make sure the tray is pushed all the way in. • Make sure the metal plate is pressed down. • Make sure the paper is under both corner bucklers. • Make sure the paper does not exceed the stack height indicator. • Remove the paper from the optional 250-sheet tray and fan the paper. | p.60 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.