
User’s Guide
June 2005
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2005 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550

Edition notice
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. PictureGrade is a trademark of Lexmark International, Inc. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands. PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript 3 is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be compatible with the PostScript 3 language. This means the printer recognizes PostScript 3 commands used in various application programs, and that the printer emulates the functions corresponding to the commands. Details relating to compatibility are included in the Technical Reference. Other trademarks are the property of their respective owners.
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. © 2005 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
The printer resident software contains software developed and copyrighted by Lexmark. In addition, the printer resident software may contain:
BSD License and Warranty statements
GNU General Public License
Open Source License

The Lexmark modified third-party software covered by these third- party licenses is free software; you can redistribute it and/or modify it under the terms of the licenses referenced above. These licenses do not provide you any rights to the Lexmark copyrighted software in this printer. Since the third-party licensed software the Lexmark modifications are based on is supplied explicitly without warranty, use of the Lexmark modified version is similarly provided without warranty. See the warranty disclaimers in the referenced licenses for additional details. To obtain source code files for the Lexmark modified GNU licensed software, launch the drivers CD that shipped with your printer and click Contact Lexmark.
This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom.
The Lexmark E238, Machine Type 4511, has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Any questions regarding this compliance information statement should be directed to:
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000
ENERGY STAR
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment manufacturers to promote the introduction of energy- efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce products that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France. This product satisfies the limits of EN 55022; safety requirements of EN 60950; radio spectrum requirements of ETSI EN 300 330-1 and ETSI EN 300 330-2; and the EMC requirements of EN 55024, ETSI EN 301 489-1 and ETSI EN 301 489-3.
If this symbol appears on your product, the accompanying statement is applicable.
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
If this symbol appears on your product, the accompanying statement is applicable.

The following table documents the power consumption characteristics of the printer.

If this symbol appears on your product, the accompanying statement is applicable.

This equipment has undergone EMC registration as a household product. It can be used in any area, including a residential area.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
intended. To obtain warranty service, you may be required to present the feature or option with the product. If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
This printer is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this printer is not used for a specified period of time, called the Power Saver Timeout. The factory default Power Saver Timeout is 30 minutes for the Lexmark E238. By Using the Local Printer Setup Utility, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the printer. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy. If the Power Saver Mode is affecting the effective use of this printer, this mode can be disabled from the Local Printer Setup Utility (see page 74).
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. ###List product-specific maintenance items such as fuser units, transfer belts, and paper feed items)###, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item. To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances. Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark). For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com. Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.
It is sometimes helpful to calculate the total printer energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the printer spends in each mode in order to calculate energy usage. The total printer energy usage is the sum of each mode's energy usage.
This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product. Warranty service does not include repair of failures caused by:
Lexmark warrants that this product:

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you. This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.






The operator panel has 5 lights and 2 buttons.

Toner Low / Replace PC Kit

Before installing printer software
A local printer is a printer attached to a computer using a USB or parallel cable. You must install some necessary printer software on the computer before connecting the USB cable.
The drivers CD can be used to install software on most Windows operating systems. If the operating system is not supported by the CD, the Add Printer Wizard must be used. Updates for the printer software may be available on the Lexmark Web site at www.lexmark.com.
You can install printer drivers and software for the following operating systems using the drivers CD:
1 Insert the drivers CD. If the CD does not launch automatically, click Start Æ Run, and type D:\Setup.exe in the Run dialog (where D is the letter of the CD-ROM drive).
2 Select the Local install path, and follow the instructions on the screen.
3 Connect the USB cable, and turn on the printer. The Plug and Play screen appears, and a printer object is created in the printers folder of the computer.
The following operating systems must use the Add Printer Wizard to install printer software:
1 Insert the drivers CD. If the CD launches automatically, click Exit.
2 Launch the Add Printer Wizard.
3 When prompted, select to install a Local printer, then click Have Disk.
4 Specify the location of the printer software on the drivers CD. The path should be similar to the following: D:\Drivers\Print\Win_9xMe\<language> where D is the letter of the CD-ROM drive.
5 Click OK.

Installing optional printer software
If you want to use any of the other software applications available on the drivers CD, now is a good time to set them up.
The Local Printer Settings Utility, a printer configuration utility, gives you the ability to change and save printer settings on a locally (USB and parallel) connected printer. User default settings remain in effect until you make other selections, or until you restore the original printer settings (called preset factory default settings). The configurable settings are organized according to menu. You can change settings such as Toner Darkness, Power Saver, Default Paper Size, and Default Paper Type.
1 Launch the drivers CD.
2 Click Install Printer Software.
3 Select the Custom install path.
4 Under Tools, select Local Printer Settings Utility.
5 Click Finish to complete the installation.
Use the printer driver to make changes to settings for individual print jobs, which will override the default settings on the printer. To access the Local Printer Setup Utility from your desktop, click Start Æ Programs Æ Lexmark Æ Local Printer Settings Utility.
Mac OS 9.x or later is required for USB printing. To print locally to a USB-attached printer, create a desktop printer icon (Mac OS 9), or create a queue in Print Center / Printer Setup Utility (Mac OS X).
at www.lexmark.com.
Creating a queue in Print Center / Printer Setup Utility (Mac OS X)
1 Install a PostScript Printer Description (PPD) file on the computer. A PPD file provides detailed information about the capabilities of a printer to the Macintosh computer.
a Insert the drivers CD.
b Double-click the installer package for the printer.
c Click Continue on the Welcome screen and again after viewing the Readme file.
d Click Continue after viewing the license agreement, and click Agree to accept the terms of the agreement.
e Select a Destination, and click Continue.
f On the Easy Install screen, click Install.
g Enter the user password, and click OK. All the necessary software is installed on the computer.
h Click Close when installation is complete.
2 Open Finder, click Applications, and click Utilities.
3 Double-click Print Center or Printer Setup Utility.

4 Do one of the following:
1 Install a PostScript Printer Description (PPD) file on the computer. A PPD file provides detailed information about the capabilities of a printer to the Macintosh computer.
a Insert the drivers CD.
b Double-click Classic, and double-click the installer package for the printer.
c Choose the language needed for use, and click Continue.
d Click Continue after viewing the Readme file.
e Click Continue after viewing the license agreement, and click Agree to accept the terms of the agreement.
f On the Easy Install screen, click Install. All the necessary files are installed on the computer.
g Click Close when installation is complete.
2 Do one of the following:
3 Double-click Desktop Printer Utility.
4 Select Printer (USB), and click OK.
5 In the USB Printer Selection section, click Change. If the printer does not appear in the USB Printer Selection list, make sure the USB cable is properly connected, and the printer is turned on.
6 Select the name of the printer, and click OK. The printer appears in the original Printer (USB) window.
7 In the PostScript Printer Description (PPD) File section, click Auto Setup. Make sure the printer PPD now matches the printer in use.
8 Click Create, and click Save.
9 Specify a printer name, and click Save. The printer is now saved as a desktop printer.
Local printing is supported on many UNIX and Linux platforms, such as Sun Solaris and Red Hat.
The Sun Solaris and Linux packages are available on the drivers CD and on the Lexmark Web site at www.lexmark.com. The UNIX/Linux User’s Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
All the printer driver packages support local printing using a parallel connection. The driver package for Sun Solaris supports USB connections to Sun Ray appliances and Sun workstations.
Visit the Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.



What types of print media can be loaded?
Get the most out of your printer by properly loading the trays. Never mix media types within a tray.
Source Sizes Types Weight Capacity* (sheets)
Tray 1 (250-sheet tray)
A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels
60–90 g/m2 (16–24 lb)
Tray 2 (550-sheet tray)
A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels
60–90 g/m2 (16–24 lb)
Manual feeder A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels,
60–163 g/m2 (16–43 lb)
7¾, 9, 10, DL, C5, B5 Envelopes 90 g/m2 (24 lb)
* Capacity for 20 lb print media, unless otherwise noted. † Grain short is recommended. Use rear exit for best results. ‡ Universal size ranges:
– Tray 1: 89–216 x 210–356 mm (3.5–8.5 x 8.27–14.0 in.) – Tray 2: 148–216 x 210–356 mm (5.83–8.5 x 8.27–14.0 in.) – Manual feeder: 76–216 x 127–356 mm (3.0–8.5 x 5.0–14.0 in.) (includes 3 x 5 in. cards)

Where can print media be loaded in the printer?
Your printer has two standard paper sources: an automatic 250-sheet paper feeder (Tray 1) and a single-sheet manual feeder. Use Tray 1 for most print jobs. Use the manual feeder for a single piece of paper, transparency, envelope, paper label, card stock, or index card.
An output bin on top of the printer holds up to 150 sheets. The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams. This is especially useful for specialty media, such as transparencies, envelopes, paper labels, card stock, or index cards


Dust cover (some models)

Tips on choosing the right print media
Selecting the right paper or other media reduces printing problems. For best print quality, try a sample of the paper or other media you are considering before buying large quantities.
See the Card Stock & Label Guide available on our Lexmark Web site at www.lexmark.com for more information about which paper provides optimum results for your printing environment.
The printer can automatically feed paper weights from 60 to 90 g/m2 (16 to 24 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. Paper heavier than 90 g/m2 (24 lb) should be fed through the optional 550-sheet tray or the manual feeder.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 170°C (338°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 170°C (338°F) without melting or releasing hazardous emissions.
We recommend Lexmark laser printer transparencies: part number 70X7240 for letter size transparencies; part number 12A5010 for A4 size transparencies.
– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossments – Use metal clasps, string ties, or metal folding bars – Have postage stamps attached

– Have any exposed adhesive when the flap is in the sealed position
– sealing – excessive curling – wrinkling – releasing hazardous emissions
If you have any doubts about the envelopes you are considering using, check with the envelope supplier.

Card stock
Use the following guidelines to avoid paper feeding problems and uneven print quality.
Choose a cool, clean storage area for your printer supplies. Store supplies right side up in their original packaging until you are ready to use them.
Do not expose supplies to:

Tips on preventing jams
You can avoid most paper jams by correctly loading paper and specialty media in the printer.
The following hints can help you avoid paper jams:
– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossments – Have metal clasps, string ties, or metal folding bars – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed position

How to load the 250-sheet tray
Follow these instructions to load paper in the 250-sheet tray.
1 Remove the tray.

tray for legal or folio size paper on page 24 for instructions.
2 Prepare a stack of paper for loading by flexing and fanning it back and forth. Straighten the edges on a level surface.


3 Load the paper in the tray with the print side facing down.

should be placed at the front of the tray.
Make sure the paper is below the max fill line on the side guides. Overloading may cause jams.
4 Slide the two side guides and the back guide until they fit snugly against the stack of paper.
5 Insert the tray.


6 Extend the paper support on the output bin.

To load legal or folio size paper, you need to extend the paper tray. You should also attach the dust cover on the back of the printer to protect the tray while it is extended.
1 Press down on the latch at the back of the tray.
2 Expand the tray until the extender locks into place.


Attaching the dust cover
The dust cover helps protect the paper tray from the environment as well as keep the tray from being knocked out of position while it is extended.

Attach the dust cover to the back of the printer by aligning the tabs on the cover to the holes on the printer, and snap the cover into place.

How to load the manual feeder
The manual feeder is located at the front of your printer and can only feed one sheet of print media at a time. You can use the manual feeder to make quick runs of paper types or sizes that are not currently loaded in the paper tray.
For information on acceptable print media to use in the manual feeder, see What types of print media can be loaded? on page 16. Using only the specified print media helps prevent paper jams and print quality problems.
to manually feed a print job on page 31 for more information.
To load the manual feeder:
1 Place a sheet of the selected print media, print side facing up, at the center of the manual feeder, but only to the point where its leading edge can contact the paper guides. Otherwise, the printer will engage the print media too soon and likely skew the print job.

2 Adjust the paper guides to the print media width.
3 Hold both sides of the print media close to the manual feeder, and push it into the printer until it automatically engages.
There is a brief pause between the time the printer engages the print media and when it feeds into the printer.
the feeder. Forcing the media causes jams.
The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams. This is especially useful for specialty media, such as transparencies, envelopes, labels, card stock, or index cards.

To use the rear exit, open the rear exit door. When the rear exit door is open, all print media comes out the rear exit. When closed, all media is sent to the output bin on top of the printer.

How to clear paper jams
When a paper jam occurs, the printer stops and the operator panel Paper Jam and Continue lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence. See Secondary error codes on page 61 for more information.
We recommend that you clear the entire paper path when a paper jam occurs.
To clear a paper jam:
1 If you are feeding paper from a tray, remove the tray, and then remove any jams.


2 Open the front cover, and remove the print cartridge assembly.

Extended light exposure can cause print quality problems.
3 Remove any jams in the area behind the print cartridge assembly.


4 Lift the flap at the front of the printer, and remove any jams beneath the flap.

5 Open the rear exit, and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue to resume printing.
image of a page may be re-used after the page is printed but before it has successfully exited the printer if that memory is needed for another use. Therefore, a jammed page may or may not be reprinted, depending on the printer’s overall memory usage.


The manual feeder is located at the front of the printer and can only feed one sheet of print media at a time. For information on acceptable print media to use in the manual feeder, see What types of print media can be loaded? on page 16.
When using the manual feeder, send the print job to the printer before loading the print media. When the printer is ready, it will display the Load Manual Feeder light sequence, at which point you should load the media.
To manually feed a print job:
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Paper tab.
4 Select Manual paper from the Paper tray drop-down list.
5 Select the appropriate Paper size and type.
6 Click OK.
7 Click OK on the Print window to send the job to print.
The printer displays the Load Manual Feeder light sequence.

8 Place a sheet of the selected print media, print side facing up, at the center of the manual feeder, but only to the point where its leading edge can contact the paper guides.

9 Adjust the paper guides to the print media width.
10 Hold both sides of the print media close to the manual feeder, and push it into the printer until it automatically engages.

There is a brief pause between the time the printer engages the print media and when it feeds into the printer.

How to print on both sides of the paper (manual duplex)
Printing on both sides of the paper reduces printing costs.
Although you can use Tray 1 or the 550-sheet tray to print the first side of the duplex job, only use Tray 1 to print the second side.
You can choose how you want your job duplexed: Long Edge or Short Edge.
Portrait
Front of next sheet
Front of next sheet
Landscape
Back of sheet Front of sheet
To manually duplex a print job:
1 From the computers software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, select 2-sided printing.
4 Select either Long Edge or Short Edge.
5 Select 2-sided printing.
6 Click the Paper tab.
7 Select the appropriate Input options for your print job.

8 Click OK.
9 Click OK on the Print window.
The printer prints every other page of the document first. Once the first side of your job prints, the Load Paper light comes on, and the Continue light blinks.

10 Load the paper back into the printer with the already-printed side up and the top of the page toward the front of the tray.

How to print multiple page images on one page (N-up printing)
The Multipage Printing (N-up) setting is used to print multiple page images on a single page. For example, 2-Up means two page images are printed on one page, 4-up means four page images are printed on one page, and so on.
The printer uses the Multipage Order, Multipage View, and Multipage Border settings to determine the order and orientation of the page images, and whether a border is printed around each page image.
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, select the number of images per sheet (from the Multipage printing section) and the orientation you would like the paper to have.
The positioning depends on the number of images and whether the images are portrait or landscape in orientation.
For example, if you select 4-Up multipage printing and portrait orientation, the results differ depending on the Multipage Order value you select:
4 To print a visible border around each page image, select Print page borders.
5 Click OK.
6 Click OK on the Print window to send the job to print.

How to print a booklet
The Booklet setting lets you print multiple pages in booklet form without having to re-format your document so the pages print in the proper order. The pages print so that the finished collated document may be folded along the center of each page to form a booklet.
If the document contains many pages, a booklet may have too many pages to fold easily. If you are printing a fairly large booklet, you might want to use the Sheets per Bundle option to specify how many physical pages are put into one bundle. The printer will print the necessary number of bundles, which you can then bind into one booklet. Printing in bundles helps the outside edge of the pages line up more evenly.
You must specify whether or not you want to print using any Duplex printing options before you select to print using the booklet function. Once you choose Print Using Booklet, the controls for the Duplex options are unavailable and remain at the last setting used.
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, click More Page Layout Options.
4 Click Booklet.
If your print job is large, you may want to use the Sheets per Bundle option.
5 Select the appropriate binding edge for your print job.
6 To print a visible fold mark on the pages, select Print fold mark.
7 Click OK twice.
8 Click OK on the Print window to send the job to print.

How to print a poster
The Poster setting lets you print a single image across several pages. Once printed, you can combine the pages to create one large image.
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, click More Page Layout Options.
4 Click Poster.
5 Select the poster size you want by choosing the number of pages to use in the poster.
6 To print crop marks on the pages, select Print crop marks.
7 Select the amount of overlap you want each page to have.
8 Click OK twice.
9 Click OK on the Print window to send the job to print.

How to print on letterhead
To print on letterhead, make sure the paper is loaded with the proper orientation.
1 Make sure the letterhead is properly loaded according to the paper source you are using:
displays the Load Manual Feeder light sequence (see How to manually feed a print job on page 31).
2 From the computer software application, select File Æ Print.
3 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
4 Click the Paper tab.
5 Select Letterhead from the Paper type drop-down lists.
6 Select the appropriate paper size and tray.
7 Click OK.
8 Click OK on the Print window to send the job to print.
Overlays and watermarks are templates that can be defined and then printed as a background on a form before the data from the current job is printed. Typical examples of overlays include company logos or letterheads, decorative borders, and simulated “preprinted” forms. Overlays can include text, graphics, or images. Watermarks are simple text. You can create overlays and watermarks and then download them directly to the printer, or you can create an overlay or watermark file on your system and then download it to the printer.
For information about how to create, save, or download an overlay or watermark, see the printer driver Help.
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Other Options tab.
4 Click Overlay.
5 Select which pages receive the overlay.
6 Select the overlay to use.
7 Select whether to place the overlay on top of or underneath the page image in the Overlay placement area.
8 Click OK.

Using a watermark
1 From the computer software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Other Options tab.
4 Click Watermark.
5 Select which pages receive the watermark.
6 Select the watermark to use.
7 Select whether to place the watermark on top of or underneath the page image in the Watermark placement area.
8 Click OK.

How to cancel a print job
A print job can be canceled from the operator panel or from your computer. The Cancel job light sequence is displayed on the operator panel while the job is being canceled.
Press and release Cancel to cancel the job currently printing.
1 Click Start Æ Settings Æ Printers.
2 Double-click the printer you are using to print the job.
A list of print jobs appears.
3 Right-click the document you want to stop printing, and then click Cancel.
Canceling a print job from a computer running Mac OS 9
When you send a job to print, the printer icon for your selected printer appears on the desktop.
1 Double-click the printer icon on your desktop.
A list of print jobs appears in the printer window.
2 Select the print job you want to cancel.
3 Click the trash can button.
When you send a job to print, the printer icon for your selected printer appears in the dock.
1 Open Applications Æ Utilities, and then double-click Print Center or Printer Setup.
2 Double-click the printer you are printing to.
3 In the printer window, select the print job you want to cancel.
4 Press Delete.


To install memory, you must access the printer system board.
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.


2 Open the rear exit.

3 Open the side cover by pressing the two detents on the front right side of the machine and swinging the cover back.


How to add a memory card
The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB) for the Lexmark E240 and up to 128MB (for a total of 160MB) for the Lexmark E240n.
power cord before continuing.
1 Access the system board (see How to access the system board).
2 Push open the latches on both ends of the memory connector.
3 Unpack the memory card.
something metal, such as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4 Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on each end of the card.
7 Close the side cover.
8 Close the rear exit.
9 Close the front cover.
10 See Recognizing installed options.
After the printer is turned on, the printer driver should automatically recognize an option you installed. If it does not, you can add it manually.
tasks. After you have installed a printer driver, return here to complete these instructions.
1 Click Start Æ Settings Æ Printers.
2 Select the printers icon.
3 Click File Æ Properties.
4 Click the Install Options tab.
5 Add the appropriate options to your configuration:
6 Click OK.


The operator panel has 5 lights and 2 buttons.

Toner Low / Replace PC Kit

Understanding the operator panel lights
The operator panel lights mean different things, depending on their sequence. Lights that are off, on, and/or blinking indicate printer conditions such as printer status, intervention, or service.
The following tables show the most common light sequences. Click the indicated page for more information on what it means.



* See Secondary errors on page 47 for more information.

Secondary errors
Press and release Continue twice quickly to display the secondary error code light sequence. The following table shows what these light sequences mean and where to go for help.


* Paper jams at the input sensor can be either after the paper leaves the tray and enters the printer or in the manual feeder.

Operator panel codes
Below are explanations of what the primary light sequences, or codes, and secondary error codes mean and what you can do to clear them.
Ready / Power Saver

set from the Local Printer Setup Utility (see Using the Local Printer Setup Utility on page 74).

Busy


The printer is in the Ready mode, and Hex Trace is active.

Waiting

The printer is waiting until a print timeout occurs, or until it receives additional data.


Not ready

The printer is not ready to receive or process data, or the printer ports are offline.

The printer door is open.
Close the door.

Load media

The printer is out of media, or the media did not feed properly.

The printer prompts you to load a single sheet of media in the manual feed.

Print side two of a duplex job

Print the other side of your duplex print job.

The printer is ready to receive and process data. In addition, the toner in the toner cartridge is getting low.
installed.

Photoconductor kit life warning

The photoconductor is almost full and will need replacing soon.
message to appear.

The photoconductor kit is full and needs replacing.

Replace photoconductor (printer hard stop)

The photoconductor kit is full and needs replacing. The printer will not print any more pages until the photoconductor kit is replaced.
Replace the photoconductor kit. (See How to change a photoconductor kit on page 82 for help.)

The toner cartridge is not installed, or the printer detects a toner cartridge error.

Change invalid toner cartridge

The toner cartridge you are using was not designed for your printer.
Install a toner cartridge made for your printer (see What supplies do I need and how do I order them? on page 75).

The toner cartridge you are using was not designed to match the region of your printer.
Install a toner cartridge made for your printers region (see What supplies do I need and how do I order them? on page 75).

Programming engine code / Programming system code

New code is being programmed into the engine or firmware code flash.
Wait for the message to clear. When the printer has finished programming the code, it performs a soft reset.

Wait for the message to clear.

Service error

The printer has a service error and printing has stopped.
Turn the printer off and back on. If the lights are still blinking, contact Lexmark Customer Support.

The printer has one of the following errors:

Paper jam printer error

The printer has a paper jam.

Secondary error codes
Press and release Continue twice quickly to display the secondary error code light sequence. See Secondary errors on page 47.

Paper jam at the input sensor

A paper jam has occurred at the input sensor, which can be either after the paper leaves the tray and enters the printer or in the manual feeder.
Clear the paper jam. See How to clear paper jams on page 28 for more information.

A paper jam has occurred in the manual feeder.
Clear the paper jam. See How to clear paper jams on page 28 for more information.

Paper jams as it exits the tray into the printer

A paper jam has occurred as the paper is exiting the paper tray and entering the printer.
Clear the paper jam. See How to clear paper jams on page 28 for more information.

A paper jam has occurred as the paper is exiting the printer.
Clear the paper jam. See How to clear paper jams on page 28 for more information.

Paper jam in Tray 1

A paper jam has occurred in Tray 1.
Clear the paper jam. See How to clear paper jams on page 28 for more information.

The page may not print correctly because the print information on the page is too complex (that is, too large for the printers memory).

Insufficient printer memory

The printer does not have enough memory to save the data in the buffer.
The printer memory does not have the free space necessary to collate the print job. This may happen due to one of these errors:

Font error

The printer has received a request for a PPDS font which is not installed.

The printer USB or parallel port has been disabled.

Memory full

The printer is processing data, but the memory used to store pages is full.

The paper length is too short to print the formatted data. This occurs when the printer does not know the media size loaded in the tray, or there is a problem feeding the media.

Invalid engine code

The engine code has not been programmed, or the programmed code is not valid.
Download valid engine code to the internal print server.

Printing the Printer Settings Configuration sheet
To help resolve printing problems or to change printer configuration settings, advanced users can print the Printer Settings Configuration sheet for instructions on advancing through the configuration menus to select and save new settings.
To print the Printer Settings Configuration sheet:
1 Turn off the printer.
2 Open the front cover.
3 Press and hold Continue as you turn the printer back on.
All the lights cycle.
4 Close the cover. The light sequence that represents the Home menu is displayed.
5 To print the Printer Settings Configuration sheet, press and hold Continue until the lights cycle. The sheet prints.

Configuration menus overview
Menus are represented by Ready, Toner Low/Replace PC Kit, Load Paper, and Paper Jam light sequences. Menu items and their settings are indicated by Error and Continue light sequences.

Parallel menu
Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Setting Use this setting to Values
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
Protocol Receive information at a much higher transmission rate if your printer is set to Fastbytes (if your computer supports Fastbytes), or receive information at a normal transmission rate if your printer is set to Standard.
Parallel Mode 2 Determine whether the parallel port data is sampled on the leading (On) or trailing (Off) edge of strobe.
Mac Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
Setting Use this setting to Values
Auto CR after LF Specify whether the printer automatically performs a carriage return after a line feed control command.
Auto LF after CR Specify whether the printer automatically performs a line feed after a carriage return control command.
* Factory default · * Factory default

USB menu
Use the USB menu to change printer settings on jobs sent through a Universal Serial Bus (USB) port.
Setting Use this setting to Values
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
Mac Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Use the Utilities menu to troubleshoot printer problems.
Setting Use this setting to Values
Return your printer settings to the factory default values. Sometimes resetting the printer to the original settings solves formatting problems. All menu items are reset to the factory default values except:
Return the photoconductor counter to zero. The replace photoconductor message should be cleared only when the imaging drum has been replaced.
Hex Trace Help isolate printing problems when unexpected characters print or characters are missing. Hex Trace helps you determine if there is a problem with the language interpreter or the cable by telling you what information your printer is receiving. To exit Hex Trace, turn off the printer.
Print Quality Test Pages
Help isolate print quality problems, such as streaking. When you select this setting, three pages print to help you evaluate print quality:

How to print the menu settings page
To print the menu settings page and network setup page, press the Continue button from the Ready state.
– Verify that the options you installed are correctly listed under “Installed Features.”
If an option is not listed under Installed Features, turn off the printer, unplug the power cord, and reinstall the option.
– Verify the amount of memory installed is correctly listed under “Printer Information.” – Verify that the paper trays are configured for the sizes and types of paper you loaded.
1 Click Start Æ Settings Æ Printers.
2 Select your printer.
3 Click File Æ Properties.
4 Click Print Test Page.

Using the Local Printer Setup Utility
The Local Printer Setup Utility, located on the drivers CD, lets you change printer settings not available from your printer driver (for example, activating Alarm Control if you want the printer to sound an alarm when it needs attention).
Click View Documentation on the drivers CD for instructions on installing and using the Local Printer Setup Utility on your computer.
You can change the following settings using the Local Printer Setup Utility:
Finishing Settings Paper Settings Parallel Settings PCL Emulation Settings
PostScript Settings Quality Settings Setup Settings USB Settings
* Per supported sources † Per custom type number ‡ Per supported media

What supplies do I need and how do I order them?
There are only two supply items that have to be replaced on a regular basis: the toner cartridge and the photoconductor kit, which together comprise the print cartridge assembly. The photoconductor kit typically lasts up to 30,000 pages (at approximately 5% coverage), whereas the toner cartridge has to be replaced more frequently. How often the toner cartridge needs replacing depends on which cartridge you purchase and the average amount of toner coverage you have on your print jobs.
Within the United States or Canada, you can order Lexmark supplies from any authorized Lexmark supplies dealer. To locate the dealer nearest you, call 1-800-539-6275. In other countries or regions, visit the Lexmark online store at www.lexmark.com or contact the place where you bought your printer.
The recommended supplies specifically designed for the printer are:
Part number Description Average cartridge yield
12A8302 Photoconductor kit 30,000 standard pages1
23820SW Print Cartridge 2,000 standard pages2
23800SW Return Program Print Cartridge 2,000 standard pages2
1 Approximately 5% coverage. 2 Declared yield value in accordance with ISO/IEC 19752.
Choose a cool, clean storage area for your printer supplies. Store supplies right side up in their original packaging until you are ready to use them.
Do not expose supplies to:
Conserving supplies lowers printing costs.

How to know when you need new supplies
The following sections describe ways to determine when new supplies are needed.
You can determine approximately how much toner is left in your cartridge and how full the photoconductor is by printing a menu settings page. This helps you decide when you might need to order replacement supplies. For help printing a menu settings page, see How to print the menu settings page on page 73.
The Toner low light sequence (see page 54) is displayed when the toner cartridge is nearly empty. You can still print for a short time while this sequence is displayed, but print quality begins to decrease as the toner level decreases.
When the toner light sequence appears, or when you experience faded print, remove the toner cartridge. Firmly shake it side to side and front to back several times to redistribute the toner and reinsert it. Repeat this procedure multiple times. If the print remains faded, replace the toner cartridge.
To ensure print quality and to avoid damage to the printer, the printer stops operating after the photoconductor has reached a maximum of 40,000 pages. (See Replace photoconductor (printer hard stop)* on page 77 for the light sequence associated with this stop.) The printer automatically notifies you before the photoconductor reaches this point.
When you first receive the “Replace photoconductor kit” light sequence, you should immediately order a new photoconductor kit. While the printer may continue to function properly after the photoconductor kit has reached its official end-of-life (approximately 30,000 pages), print quality begins to significantly decrease until the photoconductor stops operating at the maximum of 40,000 pages.

Recognizing the operator panel light sequences
The operator panel displays certain light sequences to let you know when the toner level is low or when it’s time to replace the photoconductor kit.

* If the operator panel lights display this sequence, the printer will not print any more jobs until the photoconductor kit is replaced.
“Replace photoconductor kit” lights.

How to change a toner cartridge
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.


2 Remove the toner cartridge:
a Press the button on the base of the print cartridge assembly.
b Pull the toner cartridge up and out using the handle.

3 Unpack the new toner cartridge.
recycling. See Recycling Lexmark products on page 81 for more information.
4 Firmly shake the cartridge in all directions to distribute the toner.


5 Install the new toner cartridge by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.

6 Close the front cover.

Recycling Lexmark products
To return Lexmark products to Lexmark for recycling:
1 Visit our Web site:
2 Follow the instructions on the computer screen.

How to change a photoconductor kit
exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems.
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.


2 Pull the print cartridge assembly out of the printer by pulling on the toner cartridge handle.

Place the print cartridge assembly on a flat, clean surface.
3 Remove the toner cartridge:
a Press the button on the base of the print cartridge assembly.
b Pull the toner cartridge up and out using the handle.

4 Unpack the new photoconductor kit.

5 Install the toner cartridge into the new print cartridge assembly by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.

6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it will go.

7 Close the front cover.
the new kit.

General problems
Problem / Question Solution / Answer
What do the blinking lights mean?
See Understanding the operator panel lights on page 45 for information about what each light pattern means.
Why am I missing characters when I print on envelopes?
If you see voids (missing characters) when printing envelopes, check your printer driver settings to make sure you selected Envelope from the Paper Type menu. If Envelope is already selected, try changing the texture setting to a rougher setting. Sometimes toner does not adhere well to smooth-textured envelopes. From your printer driver, select Custom 6-Rough Env from the Paper Type menu. To change Custom 6 back to its default settings for Paper Type, Paper Texture, and Paper Weight, use the Local Printer Setup Utility on the drivers CD that shipped with your printer. If you already installed the printer drivers and utilities, skip to step 7. 1 Insert the drivers CD into your computer. 2 Click Printer Software. 3 Click Agree. 4 Select Local Printer Install, and then click Next. 5 Select your printer and port, and make sure Local Printer Setup Utility is checked. 6 Click Finish. The Utility will be installed on your computer under Program Files (unless you chose a different directory). 7 Open the Local Printer Setup Utility. 8 From the Paper menu, scroll through the menu items until you see the Custom menu setting. 9 Click Custom. 10 Scroll down to Custom 6 Paper Type. 11 Select envelope for the Custom 6 paper type, heavy for the Custom 6 paper weight, and rough for the Custom 6 paper texture. 12 From the toolbar, click Actions. 13 Click Apply to save the changes you made. 14 Click File Æ Exit to close the Local Printer Setup Utility.
How do I clear a paper jam?
See How to clear paper jams on page 28 for information about clearing jams.

Problem / Question Solution / Answer
How do I restore the factory defaults?
Sometimes restoring the printer to the original factory default settings solves formatting problems. To reset the factory defaults: 1 Turn off the printer. 2 Open the front cover. 3 Press Continue as you turn the printer back on. 4 Keep pressing Continue until the Error light comes on, then release the Continue button. 5 Close the front cover. 6 As the printer warms up, the top four lights come on. 7 Press Cancel. 8 Press Continue until the operator panel cycles through all of the lights. 9 When the top four lights come on, release the Continue button. 10Turn the printer off and back on. 11Factory defaults have been reset.
The toner low light sequence is on, but I don’t have another cartridge to put in yet. Can I still print with the low cartridge?
Yes, you can still print. To extend the life of the toner cartridge somewhat, remove the cartridge, firmly shake it from side to side and front to back several times to use the remaining toner, then insert it back into the printer. Repeat this procedure multiple times. If print remains faded, replace the toner cartridge.
The printer seems to print slower when using the manual feeder.
This is normal. The printer sometimes prints at a slightly slower speed when feeding print media from the manual feeder.
I want to manually duplex card stock, but I’m having trouble getting it to feed.
The problem is that when the printer tries to manually duplex a print job, it always prints side 2 from Tray 1. However, Tray 1 does not support card stock. To achieve the desired effect, you have to send both pages of the print job as separate jobs. After the first page has printed, reload the card stock in the manual feeder. Load the card stock in the feeder with the already-printed side down, with the top of the sheet first.
Paper stacks poorly in the output bin.
Extend the paper support on the output bin.

Problem / Question Solution / Answer
Dust is gathering on the paper tray when it is extended.
Attach the dust cover to the back of the printer. This protects the paper tray from the environment as well as keeping the tray from being knocked out of position while it is extended. See Attaching the dust cover for information about attaching the dust cover. The paper tray is getting bumped and pushed out the front of the printer when it is extended.
You can solve many print quality problems by replacing a supply or maintenance item that has reached the end of its intended life. Use the following table to find solutions to print quality problems.
Try the following in this order: 1 Clean the printhead lens. (See How to clean the printhead lens on page 91.) 2 Replace the toner cartridge. 3 Replace the fuser*.
Replace the toner cartridge or fuser* as needed.
Streaked horizontal lines The toner cartridge or fuser may be defective, empty, or worn.
*To replace the fuser, call a service technician. †This setting can be changed using the Local Printer Setup Utility. See Using the Local Printer Setup Utility on page 74 for more information.
Symptom Cause Solution

Transparency print quality is poor (Print has inappropriate light or dark spots, toner is smeared, or horizontal or vertical light bands appear.)
Toner rubs off the paper easily when you handle the sheets
*To replace the fuser, call a service technician. †This setting can be changed using the Local Printer Setup Utility. See Using the Local Printer Setup Utility on page 74 for more information.
Symptom Cause Solution

Uneven print density The toner cartridge is defective. Replace the toner cartridge.
The toner cartridge is not properly installed.
Remove and then reinsert the toner cartridge.
(Print only appears on one side of the page.)
Incorrect margins The Form Size setting in the printer driver is different than the size paper that is loaded in the tray. For example, you inserted A4 size paper into the selected tray but did not set the Form Size to A4.
Set the Form Size to A4.
Skewed print (Print is inappropriately slanted.)
Blank pages The toner cartridge is defective or empty.
Replace the toner cartridge.
*To replace the fuser, call a service technician. †This setting can be changed using the Local Printer Setup Utility. See Using the Local Printer Setup Utility on page 74 for more information.
Symptom Cause Solution · Uneven printing

Change Paper Weight† to Smooth.
Paper curls badly once it prints and exits to the bin
The Paper Weight setting is wrong for the type of paper or specialty media you are using.
*To replace the fuser, call a service technician. †This setting can be changed using the Local Printer Setup Utility. See Using the Local Printer Setup Utility on page 74 for more information.
Symptom Cause Solution

How to clean the printhead lens
You can solve some print quality problems by cleaning the printhead lens.
1 Turn the printer off.
2 Open the front cover by pressing the button on the left side of the printer and lowering the cover.


3 Remove the print cartridge assembly out of the printer by pulling on the toner cartridge handle.

Place the print cartridge assembly on a flat, clean surface.
Extended light exposure can cause print quality problems.

4 Locate the glass printhead lens, which is located within the recessed area in the top of the printer.

5 Gently wipe the printhead lens with a clean, dry, lint-free cloth.
6 Install the print cartridge assembly into the printer by aligning the arrows on the guides of the print cartridge assembly with the arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it will go.

7 Close the front cover.
8 Turn the printer on.
Printhead lens


Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| What do the blinking lights mean? | See Understanding the operator panel lights on page 45 for information about what each light pattern means. | p.85 | |
| Why am I missing characters when I print on envelopes? | If you see voids (missing characters) when printing envelopes, check your printer driver settings to make sure you selected Envelope from the Paper Type menu. If Envelope is already selected, try changing the texture setting to a rougher setting. Sometimes toner does not adhere well to smooth-textured envelopes. From your printer driver, select Custom 6-Rough Env from the Paper Type menu. To change Custom 6 back to its default settings for Paper Type, Paper Texture, and Paper Weight, use the Local Printer Setup Utility on the drivers CD that shipped with your printer. If you already installed the printer drivers and utilities, skip to step 7. 1 Insert the drivers CD into your computer. 2 Click Printer Software. 3 Click Agree. 4 Select Local Printer Install, and then click Next. 5 Select your printer and port, and make sure Local Printer Setup Utility is checked. 6 Click Finish. The Utility will be installed on your computer under Program Files (unless you chose a different directory). 7 Open the Local Printer Setup Utility. 8 From the Paper menu, scroll through the menu items until you see the Custom menu setting. 9 Click Custom. 10 Scroll down to Custom 6 Paper Type. 11 Select envelope for the Custom 6 paper type, heavy for the Custom 6 paper weight, and rough for the Custom 6 paper texture. 12 From the toolbar, click Actions. 13 Click Apply to save the changes you made. 14 Click File Æ Exit to close the Local Printer Setup Utility. | p.85 | |
| How do I clear a paper am? | See How to clear paper jams on page 28 for information about clearing jams. | p.85 | |
| How do I restore the factory defaults? | Sometimes restoring the printer to the original factory default settings solves formatting problems. To reset the factory defaults: 1 Turn off the printer. 2 Open the front cover. 3 Press Continue as you turn the printer back on. 4 Keep pressing Continue until the Error light comes on, then release the Continue button. 5 Close the front cover. 6 As the printer warms up, the top four lights come on. 7 Press Cancel. 8 Press Continue until the operator panel cycles through all of the lights. 9 When the top four lights come on, release the Continue button. 10Turn the printer off and back on. 11Factory defaults have been reset. | p.86 | |
| The toner low light sequence is on, but I don’t have another cartridge to put in yet. Can I still print with the low cartridge? | Yes, you can still print. To extend the life of the toner cartridge somewhat, remove the cartridge, firmly shake it from side to side and front to back several times to use the remaining toner, then insert it back into the printer. Repeat this procedure multiple times. If print remains faded, replace the toner cartridge. | p.86 | |
| The printer seems to print slower when using the manual feeder. | This is normal. The printer sometimes prints at a slightly slower speed when feeding print media from the manual feeder. | p.86 | |
| I want to manually duplex card stock, but I’m having trouble getting it to feed. | The problem is that when the printer tries to manually duplex a print job, it always prints side 2 from Tray 1. However, Tray 1 does not support card stock. To achieve the desired effect, you have to send both pages of the print job as separate jobs. After the first page has printed, reload the card stock in the manual feeder. Load the card stock in the feeder with the already-printed side down, with the top of the sheet first. | p.86 | |
| Paper stacks poorly in the output bin. | Extend the paper support on the output bin. | p.86 | |
| Dust is gathering on the paper tray when it is extended. | Attach the dust cover to the back of the printer. This protects the paper tray from the environment as well as keeping the tray from being knocked out of position while it is extended. See Attaching the dust cover for information about attaching the dust cover. | p.87 | |
| The paper tray is getting bumped and pushed out the front of the printer when it is extended. | p.87 | ||
| White lines ABCDE ABCDE ABCDE | • The printhead lens is dirty. • Either the toner cartridge or the fuser is defective. | Try the following in this order: 1 Clean the printhead lens. (See How to clean the printhead lens on page 91.) 2 Replace the toner cartridge. 3 Replace the fuser*. | p.87 |
| Streaked horizontal lines ABCDE ABCDE ABCDE | The toner cartridge or fuser may be defective, empty, or worn. | Replace the toner cartridge or fuser* as needed. | p.87 |
| Streaked vertical lines ABCDE ABCDE ABCDE | • Toner is smeared before fusing to the paper. • The toner cartridge is defective. | • If paper is stiff, try feeding from another tray or the manual feeder. • Replace the toner cartridge. | p.87 |
| *To replace the fuser, call a service technician. †This setting can be changed using the Local Printer Setup Utility. See Using the Local Printer Setup Utility on page 74 for more information. | p.87 | ||
| Print irregularities ABCDE ABCDE ABCDE | • Paper has absorbed moisture due to high humidity. • You are using paper that does not meet the printer specifications. • The fuser is worn or defective. | • Load paper from a fresh package in the paper tray. • Avoid textured paper with rough finishes. • Make sure the printer driver paper type setting matches the type of paper you are using. • Replace the fuser*. | p.88 |
| Print too light | • The Toner Darkness setting is too light. • You are using paper that does not meet the printer specifications. • The toner cartridge is low on toner. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Load paper from a new package. • Avoid textured paper with rough finishes. • Make sure the paper you load in the trays is not damp. • Replace the toner cartridge. | p.88 |
| Print too dark | • The Toner Darkness setting is too dark. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Replace the toner cartridge. | p.88 |
| Transparency print quality is poor (Print has inappropriate light or dark spots, toner is smeared, or horizontal or vertical light bands appear.) | • You are using transparencies that do not meet the printer specifications. • The Form Type setting in the printer driver is set to something other than transparency. | • Use only transparencies recommended by the printer’s manufacturer. • Make sure the Form Type setting is set to transparency. | p.88 |
| Toner specks | • The toner cartridge is defective. • The fuser is worn or defective. • Toner is in the paper path. | • Replace the toner cartridge. • Replace the fuser*. • Call for service. | p.88 |
| Toner rubs off the paper easily when you handle the sheets | • The Paper Texture setting is wrong for the type of paper or specialty media you are using. • The Paper Weight setting is wrong for the type of paper or specialty media you are using. • The fuser is worn or defective. | • Change Paper Texture† from Normal to Smooth or Rough. • Change Paper Weight† from Plain to CardStock (or other appropriate weight). • Replace the fuser*. | p.88 |
| Gray background ABCDE ABCDE ABCDE | • The Toner Darkness setting is too dark. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Replace the toner cartridge. | p.88 |
| Uneven print density ABCDE ABCDE ABCDE | The toner cartridge is defective. | Replace the toner cartridge. | p.89 |
| Ghost Images | • The Form Type setting in the printer driver is set incorrectly. • Toner level is low in the toner cartridge. | • Make sure the Form Type setting is correct for the paper or specialty media you are using. • Replace the toner cartridge. | p.89 |
| Uneven printing DE DE DE (Print only appears on one side of the page.) | The toner cartridge is not properly installed. | Remove and then reinsert the toner cartridge. | p.89 |
| Incorrect margins | The Form Size setting in the printer driver is different than the size paper that is loaded in the tray. For example, you inserted A4 size paper into the selected tray but did not set the Form Size to A4. | Set the Form Size to A4. | p.89 |
| Skewed print (Print is inappropriately slanted.) | • The guides in the selected tray are not in the correct position for the paper size loaded in the tray. • The manual feeders guides are not in the correct position for the paper size loaded in the feeder. | • Move the guides in the tray so that they are snug against the sides of the paper. • Move the manual feeders guides so that they are snug against the sides of the paper. | p.89 |
| Blank pages | The toner cartridge is defective or empty. | Replace the toner cartridge. | p.89 |
| Solid black pages | • The toner cartridge is defective. • Your printer requires servicing. | • Replace the toner cartridge. • Call for service. | p.90 |
| Paper curls badly once it prints and exits to the bin | The Paper Weight setting is wrong for the type of paper or specialty media you are using. | Change Paper Weight† to Smooth. | p.90 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.