
November 2003
www.lexmark.com
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2003 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550


of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. © 2003 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.
Edition notice
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. PictureGrade is a trademark of Lexmark International, Inc. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands. PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript 3 is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be compatible with the PostScript 3 language. This means the printer recognizes PostScript 3 commands used in various application programs, and that the printer emulates the functions corresponding to the commands. Details relating to compatibility are included in the Technical Reference. Other trademarks are the property of their respective owners.
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies

Laser notice
The printer resident software contains:
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
BSD License and Warranty statements
GNU General Public License
The Lexmark modified GNU licensed software is free software; you can redistribute it and/or modify it under the terms of the licenses referenced above. These licenses do not provide you any rights to the Lexmark copyrighted software in this printer. Since the GNU licensed software that the Lexmark modifications are based upon is supplied explicitly without warranty, use of the Lexmark modified version is similarly provided without warranty. See the warranty disclaimers in the referenced licenses for additional details. To obtain source code files for the Lexmark modified GNU licensed software, launch the drivers CD that shipped with your printer and click Contact Lexmark.
This apparatus is approved under the approval number NS/G/1234/J/100003 for the indirect connections to the public telecommunications systems in the United Kingdom.
Federal Communications Commission (FCC) compliance information statement
The Lexmark E230, Machine Type 4505-100, Lexmark E232, Machine Type 4505-200, Lexmark E330, Machine Type 4505-300, and Lexmark E332n, Machine Type 4505-310, have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

If your product includes the following symbol on the regulatory label: the following statement is applicable to your product.

This equipment has undergone EMC registration as a household product. It can be used in any area, including a residential area.
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000
Industry Canada compliance statement
The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce products that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Avis de conformité aux normes de l’industrie du Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Korean MIC statement · Noise emission levels · Japanese VCCI notice

Statement of Limited Warranty
The following table documents the power consumption characteristics of the printer.
Lexmark International, Inc., Lexington, KY
This warranty applies to the United States and Canada. For customers outside the U.S. and Canada, refer to the country-specific warranty information that came with your printer.
Lexmark E230, E232, E330, E332n
This Statement of Limited Warranty applies to this product if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this statement as “Remarketer.”
Lexmark warrants that this product:
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
As part of the ENERGY STAR program, this printer is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this printer is not used for a specified period of time, called the Power Saver Timeout. The factory default Power Saver Timeout is 15 minutes for the Lexmark E230 and 30 minutes for the Lexmark E232, Lexmark E330, and Lexmark E332n. By using the printer configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the printer. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy. If the Power Saver Mode is affecting the effective use of this printer, this mode can be disabled from the Local Printer Setup Utility (see page 103) or, if you have a network model, from the printer’s resident Web page (see page 102).
The warranty period is 12 months and starts on the date of original purchase as shown on the purchase receipt. To obtain warranty service you may be required to present proof of original purchase. Warranty service will be provided at a Remarketer or a Lexmark designated location. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligation or restrictions that prevent its exchange. Before you present this product for warranty service, remove all programs, data, and removable storage media.
It is sometimes helpful to calculate the total printer energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the printer spends in each mode in order to calculate energy usage. The total printer energy usage is the sum of each mode's energy usage.

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-859-232-3000, or on the World Wide Web at http:// support.lexmark.com. Remote technical support is provided for this product throughout its warranty period. Lexmark offers a variety of extended warranty programs that include an extension of technical support. For products no longer covered by a Lexmark warranty, technical support may only be available for a fee.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
We do not warrant uninterrupted or error-free operation of a product. Warranty service does not include repair of failures caused by:
Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this Statement of Limited Warranty, you may recover actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1) $5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim. This limitation of remedies also applies to any developer of materials supplied to Lexmark. Lexmark’s and the developer’s limitations of remedies are not cumulative. Such developer is an intended beneficiary of this limitation.
Additional rights · Extent of warranty · Limitation of liability

Dust cover (some models)

The operator panel has 5 lights and 2 buttons.

Toner Low / Replace PC Kit

What types of print media can be loaded? 14
Where can print media be loaded in the printer? 15
How to load the 250-sheet and 550-sheet trays 20
How to load the manual feeder 24
How to use the rear exit 25
How to clear paper jams 26
Print media tasks and tips
Section Page

Get the most out of your printer by properly loading the trays. Never mix media types within a tray.
Source Sizes Types Weight Capacity* (sheets)
A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels
60–90 g/m2 (16–24 lb)
A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels
60–163 g/m2 (16–43 lb)
Manual feeder A4, A5, JIS B5, letter, legal, executive, folio, statement, Universal‡
Plain paper, transparencies, labels
60–163 g/m2 (16–43 lb)
Card stock† • 120–163 g/m2
(16–90 lb) Index Bristol
7¾, 9, 10, DL, C5, B5 Envelopes 90 g/m2 (24 lb)
* Capacity for 20 lb print media, unless otherwise noted. † Grain short is recommended. Use rear exit for best results. ‡ Universal size ranges:
– Tray 1: 89–216 x 210–356 mm (3.5–8.5 x 8.27–14.0 in.) – Tray 2: 148–216 x 210–356 mm (5.83–8.5 x 8.27–14.0 in.) – Manual feeder: 76–216 x 127–356 mm (3.0–8.5 x 5.0–14.0 in.) (includes 3 x 5 in. cards)
Print media tasks and tips

Your printer has two standard paper sources: an automatic 250-sheet paper feeder (Tray 1) and a single-sheet manual feeder. Use Tray 1 for most print jobs. Use the manual feeder for a single piece of paper, transparency, envelope, paper label, card stock, or index card. You can increase paper capacity by purchasing an optional 550-sheet drawer.
An output bin on top of the printer holds up to 150 sheets. The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams. This is especially useful for specialty media, such as transparencies, envelopes, paper labels, card stock, or index cards.
Print media tasks and tips

Selecting the right paper or other media reduces printing problems. For best print quality, try a sample of the paper or other media you are considering before buying large quantities.
Refer to the Card Stock & Label Guide available on our Lexmark Web site at www.lexmark.com for more information about which paper provides optimum results for your printing environment.
The printer can automatically feed paper weights from 60 to 90 g/m2 (16 to 24 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. Paper heavier than 90 g/m2 (24 lb) should be fed through the optional 550-sheet tray or the manual feeder.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 170°C (338°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 170°C (338°F) without melting or releasing hazardous emissions.
We recommend Lexmark laser printer transparencies: part number 70X7240 for letter size transparencies; part number 12A5010 for A4 size transparencies.
Print media tasks and tips

– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossments – Use metal clasps, string ties, or metal folding bars – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed position
– sealing – excessive curling – wrinkling – releasing hazardous emissions
If you have any doubts about the envelopes you are considering using, check with the envelope supplier.
Print media tasks and tips

Use the following guidelines to avoid paper feeding problems and uneven print quality.
Choose a cool, clean storage area for your printer supplies. Store supplies right side up in their original packaging until you are ready to use them.
Do not expose supplies to:
Print media tasks and tips

You can avoid most paper jams by correctly loading paper and specialty media in the printer.
The following hints can help you avoid paper jams:
– Have excessive curl – Are stuck together – Are damaged in any way – Contain windows, holes, perforations, cutouts, or embossments – Have metal clasps, string ties, or metal folding bars – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed position
Print media tasks and tips

Follow these instructions to load paper in the 250-sheet tray and 550-sheet tray.
1 Remove the tray.
the paper tray. See “Extending the tray for legal or folio size paper” on page 23 for instructions.
2 Prepare a stack of paper for loading by flexing or fanning it back and forth. Straighten the edges on a level surface.
Print media tasks and tips

3 Load the paper in the tray with the print side facing down.
with the logo should be placed at the front of the tray.
Make sure the paper is below the max fill line on the side guides. Overloading may cause jams.
4 Slide the two side guides and the back guide until they fit snugly against the stack of paper.
Print media tasks and tips

5 Insert the tray.
6 Extend the paper support on the output bin.
Print media tasks and tips

To load legal or folio size paper, you need to extend the paper tray. You should also attach the dust cover on the back of the printer to protect the tray while it is extended.
1 Press down on the latch at the back of the tray.
2 Expand the tray until the extender locks into place.
The dust cover helps protect the paper tray from the environment as well as keep the tray from being knocked out of position while it is extended.
with a dust cover.
Attach the dust cover to the back of the printer by aligning the tabs on the cover to the holes on the printer and snap the cover in place.
Print media tasks and tips

The manual feeder is located at the front of your printer and can only feed one sheet of print media at a time. You can use the manual feeder to make quick runs of paper types or sizes that are not currently loaded in the paper tray.
For information on acceptable print media to use in the manual feeder, see “What types of print media can be loaded?” on page 14. Using only the specified print media helps prevent paper jams and print quality problems.
manual feeder. See “How to manually feed a print job” on page 30 for more information.
To load the manual feeder:
1 Place a sheet of the selected print media, print side facing up, at the center of the manual feeder, but only to the point where its leading edge can contact the paper guides. Otherwise, the printer will engage the print media too soon and likely skew the print job.
2 Adjust the paper guides to the print media’s width.
3 Hold both sides of the print media close to the manual feeder and push it into the printer until it automatically engages.
There is a brief pause between the time the printer engages the print media and when it feeds into the printer.
Print media tasks and tips

The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams. This is especially useful for specialty media, such as transparencies, envelopes, labels, card stock, or index cards.
To use the rear exit, simply open the rear exit door. When the rear exit door is open, all print media comes out the rear exit. When closed, all media is sent to the output bin on top of the printer.
Print media tasks and tips

When a paper jam occurs, the printer stops and the operator panel’s Paper Jam and
Continue lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence. See “Secondary error codes” on page 69 for more information.
We recommend that you clear the entire paper path when a paper jam occurs.
To clear a paper jam:
1 If you are feeding paper from a tray, remove the tray, and then remove any jams.
Print media tasks and tips

2 Open the front cover and remove the print cartridge assembly.

period of time. Extended light exposure can cause print quality problems.
3 Remove any jams in the area behind the print cartridge assembly.

Print media tasks and tips

4 Lift the flap at the front of the printer and remove any jams beneath the flap.
5 Open the rear exit and remove any jams.
6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer
covers and trays are closed, and then press Continue to resume printing.
Print media tasks and tips

How to manually feed a print job 30
How to print on both sides of the paper (manual duplex) 32
How to print multiple page images on one page (N-up printing) 34
How to print a booklet 35
How to print a poster 36
How to print on letterhead 37
How to print using an overlay or a watermark 37
How to cancel a print job 39
Section Page · Printing tasks

The manual feeder is located at the front of your printer and can only feed one sheet of print media at a time. For information on acceptable print media to use in the manual feeder, see “What types of print media can be loaded?” on page 14.
When using the manual feeder, send the print job to the printer before loading the print media. When the printer is ready, it will display the Load Manual Feeder light sequence, at which point you should load the media.
To manually feed a print job:
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Paper tab.
4 Select Manual paper from the Paper tray drop-down list.
5 Select the appropriate Paper size and type.
6 Click OK.
7 Click OK on the Print window to send the job to print.
The printer displays the Load Manual Feeder light sequence.

Printing tasks

8 Place a sheet of the selected print media, print side facing up, at the center of the manual feeder, but only to the point where its leading edge can contact the paper guides.
9 Adjust the paper guides to the print media’s width.
10 Hold both sides of the print media close to the manual feeder and push it into the printer until it automatically engages.
There is a brief pause between the time the printer engages the print media and when it feeds into the printer.
Printing tasks

Printing on both sides of the paper reduces printing costs.
Although you can use Tray 1 or the 550-sheet tray to print the first side of the duplex job, only use Tray 1 to print the second side.
You can choose how you want your job duplexed: Long Edge or Short Edge.
Front of next sheet
Front of next sheet
Back of sheet Front of sheet
To manually duplex a print job:
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, select 2-sided printing.

4 Select either Long Edge or Short Edge.
5 Select Manual 2-sided printing.
6 Click the Paper tab.
7 Select the appropriate Input options for your print job.
8 Click OK.
9 Click OK on the Print window.
The printer prints every other page of the document first. Once the first side of your job prints,

the Load Paper light comes on and the Continue light blinks.
10 Load the paper back into the printer with the already-printed side up and the top of the page toward the front of the tray.
Printing tasks

The Multipage Printing (N-up) setting is used to print multiple page images on a single page. For example, 2-Up means two page images are printed on one page, 4-up means four page images are printed on one page, and so on.
The printer uses the Multipage Order, Multipage View, and Multipage Border settings to determine the order and orientation of the page images, and whether a border is printed around each page image.
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, select the number of images per sheet (from the Multipage printing section) and the orientation you would like the paper to have.
The positioning depends on the number of images and whether the images are portrait or landscape in orientation.
For example, if you select 4-Up multipage printing and portrait orientation, the results differ depending on the Multipage Order value you select:
4 To print a visible border around each page image, select Print page borders.
5 Click OK.
6 Click OK on the Print window to send the job to print.
Across Down · Printing tasks

The Booklet setting lets you print multiple pages in booklet form without having to re-format your document so the pages print in the proper order. The pages print so that the finished collated document may be folded along the center of each page to form a booklet.
If the document contains many pages, a booklet may have too many pages to fold easily. If you are printing a fairly large booklet, you might want to use the Sheets per Bundle option to specify how many physical pages are put into one bundle. The printer will print the necessary number of bundles, which you can then bind into one booklet. Printing in bundles helps the outside edge of the pages line up more evenly.
You must specify whether or not you want to print using any Duplex printing options before you select to print using the booklet function. Once you choose Print Using Booklet, the controls for the Duplex options are dimmed and remain at the last setting used.
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, click More Page Layout Options.
4 Click Booklet.
If your print job is large, you may want to use the Sheets per Bundle option.
5 Select the appropriate binding edge for your print job.
6 To print a visible fold mark on the pages, select Print fold mark.
7 Click OK twice.
8 Click OK on the Print window to send the job to print.
Printing tasks

The Poster setting lets you print a single image across several pages. Once printed, you can combine the pages to create one large image.
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 From the Page Layout tab, click More Page Layout Options.
4 Click Poster.
5 Select the poster size you want by choosing the number of pages to use in the poster.
6 To print crop marks on the pages, select Print crop marks.
7 Select the amount of overlap you want each page to have.
8 Click OK twice.
9 Click OK on the Print window to send the job to print.
Printing tasks

To print on letterhead, make sure the paper is loaded with the proper orientation.
1 Make sure the letterhead is properly loaded according to the paper source you are using:
letterhead when the printer displays the Load Manual Feeder light sequence (see “How to manually feed a print job” on page 30).
2 From the computer’s software application, select File Æ Print.
3 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
4 Click the Paper tab.
5 Select Letterhead from the Paper type drop-down lists.
6 Select the appropriate paper size and tray.
7 Click OK.
8 Click OK on the Print window to send the job to print.
Overlays and watermarks are templates that can be defined and then printed as a background on a form before the data from the current job is printed. Typical examples of overlays include company logos or letterheads, decorative borders, and simulated “preprinted” forms. Overlays can include text, graphics, or images. Watermarks are simple text. You can create overlays and watermarks and then download them directly to the printer, or you can create an overlay or watermark file on your system and then download it to the printer.
For information about how to create, save, or download an overlay or watermark, refer to the printer driver Help.
Printing tasks

1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Other Options tab.
4 Click Overlays.
5 Select which pages receive the overlay.
6 Select the overlay to use.
7 Select whether to place the overlay on top of or underneath the page image in the Overlay placement area.
8 Click OK.
1 From the computer’s software application, select File Æ Print.
2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings.
3 Click the Other Options tab.
4 Click Watermark.
5 Select which pages receive the watermark.
6 Select the watermark to use.
7 Select whether to place the watermark on top of or underneath the page image in the Watermark placement area.
8 Click OK.
Printing tasks

A print job can be canceled from the operator panel or from your computer. The Cancel job light sequence is displayed on the operator panel while the job is being cancelled.
Press and release Cancel to cancel the job currently printing.
1 Click Start Æ Settings Æ Printers.
2 Double-click the printer you are using to print the job.
A list of print jobs appears.
3 Right-click the document you want to stop printing, and then click Cancel.
When you send a job to print, the printer icon appears on the desktop.
1 Double-click the printer icon on your desktop.
A list of print jobs appears.
2 Press Control and click the print job you want to cancel. Choose Stop Queue from the pop-up menu.
Printing tasks

How to access the system board 41
How to add a memory card 45
How to add a flash card 46
How to install a 550-sheet drawer 48
How to get the printer driver to recognize installed options 49
How to install options
Section Page

To install a memory or flash card you must access the printer system board.
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.
How to install options

2 Open the rear exit.

3 Open the side cover by pressing the two detents on the front right side of the machine and swinging the cover back.

How to install options

4 Remove the two screws at the top and side of the metal plate covering the system board.

5 Remove the metal plate by rotating it towards the front and to the right.
How to install options

When you are finished adding a memory or flash card, be sure to properly reattach the system board’s metal cover.
1 Insert the two tabs on the right side of the metal plate into the holes toward the back of the system board and rotate the system board until it is flush against the printer.

2 Screw in the two screws at the top and side of the metal plate.
3 Close the side cover.
4 Close the rear exit.
5 Close the front cover.
How to install options

The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 80MB) for the Lexmark E232 and up to 128MB (for a total of 160MB) for the Lexmark E330 and Lexmark E332n. The Lexmark E230 does not support additional memory.
and unplug the power cord before continuing.
printer.
1 Access the system board (see How to access the system board).
2 Push open the latches on both ends of the memory connector.
3 Unpack the memory card.
damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4 Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on each end of the card.
7 Reattach the system board cover (see How to reattach the system board cover).
8 See How to get the printer driver to recognize installed options.
How to install options

The system board has one connector for an optional flash card. The printer can support 16MB and 32MB flash cards.
unplug the power cord before continuing.
1 Access the system board (see How to access the system board).
2 Unpack the flash card.
as the printer frame, before you touch a card.
Avoid touching the metal pins on the bottom of the card.
3 Holding the card by its sides, align the pins on the card with the holes on the system board.
How to install options
Metal pins

4 Push the flash card firmly into place.

The entire length of the connector on the flash card must touch and be flush against the system board.
Be careful not to damage the connectors.
5 Reattach the system board cover (see How to reattach the system board cover).
6 See How to get the printer driver to recognize installed options.
How to install options

Your printer supports one optional drawer that lets you load up to 550 sheets of paper.
off and unplug the power cord before continuing.
1 Unpack the 550-sheet drawer and remove any packing material.
2 Place the drawer in the location you have chosen for your printer.
3 Align the holes in the printer with the positioning posts on the 550-sheet drawer and lower the printer into place.
4 See How to get the printer driver to recognize installed options.
How to install options

After the printer is turned on, the printer driver should automatically recognize an option you installed. If it does not, you can add it manually.
under Software and network tasks. After you have installed a printer driver, return here to complete these instructions.
1 Click Start Æ Settings Æ Printers.
2 Select the printer’s icon.
3 Click File Æ Properties.
4 Click the Install Options tab.
5 Add the appropriate options to your configuration:
6 Click OK.
How to install options

Overview of the operator panel 51
Understanding the operator panel lights 52
Operator panel codes 57
Using the operator panel
Section Page

The operator panel has 5 lights and 2 buttons.

Toner Low / Replace PC Kit
Using the operator panel

The operator panel lights mean different things, depending on their sequence. Lights that are off, on, and/or blinking indicate printer conditions such as printer status, intervention, or service.
The following tables show the most common light sequences. Click the indicated page for more information on what it means.

Using the operator panel
Common light sequences

Common light sequences (continued)

* See “Secondary errors” on page 54 for more information.
Using the operator panel

Press and release Continue twice quickly to display the secondary error code light sequence. The following table shows what these light sequences mean and where to go for help.
Using the operator panel


* Paper jams at the input sensor can be either after the paper leaves the tray and enters the printer or in the manual feeder.
Using the operator panel
Secondary Error codes

Secondary Error codes (continued)

Using the operator panel

Below are explanations of what the primary light sequences, or codes, and secondary error codes mean and what you can do to clear them.
Ready / Power Saver

Light sequence:
What this light sequence means:
What you can do:
can only be set from the Local Printer Setup Utility (see “Using the Local Printer Setup Utility” on page 103).
Using the operator panel


Light sequence:
What this light sequence means:
What you can do:
– Press and release Cancel to cancel the print job.
– Press and release Cancel to cancel printing.
– Press and hold Cancel to reset the printer. • Receiving/processing data from a host interface: – Wait for the message to clear.
– Press and release Cancel to stop processing.
– Press and hold Cancel to reset the printer.
Using the operator panel


Light sequence:
What this light sequence means:
The printer is in the Ready mode and Hex Trace is active.
What you can do:

Light sequence:
What this light sequence means:
The printer is waiting until a print timeout occurs, or until it receives additional data.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
What you can do:

Light sequence:
What this light sequence means:
The printer is not ready to receive or process data, or the printer ports are offline.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer door is open.
What you can do:
Close the door.

Light sequence:
What this light sequence means:
The printer is out of media, or the media did not feed properly.
What you can do:
press Continue to resume printing. • Check that the media is loaded correctly in tray 1 or the optional 550-sheet tray.
Using the operator panel


Light sequence:
What this light sequence means:
The printer prompts you to load a single sheet of media in the manual feed.
What you can do:

Light sequence:
What this light sequence means:
Print the other side of your duplex print job.
What you can do:
Continue to resume printing.
Using the operator panel


Light sequence:
What this light sequence means:
The code in an internal print server has not been programmed, or the programmed code is not valid.
What you can do:
Download valid network code to the internal print server. Press
Continue twice quickly to see the secondary error code. See “Secondary error codes” on page 69 for more information.

Light sequence:
What this light sequence means:
The printer is ready to receive and process data. In addition, the toner in the toner cartridge is getting low.
What you can do:
cartridge is installed in a base printer model.
Using the operator panel


Light sequence:
What this light sequence means:
The photoconductor kit’s drum is almost full and will need replacing soon.
for this message to appear.
What you can do:

Light sequence:
What this light sequence means:
The photoconductor kit’s drum is full and needs replacing.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The photoconductor kit’s drum is full and needs replacing. The printer will not print any more pages until the photoconductor kit is replaced.
What you can do:
Replace the photoconductor kit. (See “How to change a photoconductor kit” on page 112 for help.)

Light sequence:
What this light sequence means:
The toner cartridge is not installed, or the printer detects a toner cartridge error.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The toner cartridge you are using was not designed for your printer.
What you can do:
Install a toner cartridge made for your printer (see “What supplies do I need and how do I order them?” on page 105).

Light sequence:
What this light sequence means:
New code is being programmed into the engine or firmware code flash.
What you can do:
Wait for the message to clear. When the printer has finished programming the code, it performs a soft reset.
Using the operator panel


Light sequence:
What this light sequence means:
What you can do:
Wait for the message to clear.

Light sequence:
What this light sequence means:
The printer has a service error and printing has stopped.
What you can do:
Turn the printer off and back on. If the lights are still blinking, contact the place where you bought your printer.
Using the operator panel


Light sequence:
What this light sequence means:
The printer has one of the following errors:
What you can do:

Light sequence:
What this light sequence means:
The printer has a paper jam.
What you can do:
Using the operator panel

Press and release Continue twice quickly to display the secondary error code light sequence.
Using the operator panel


Light sequence:
What this light sequence means:
A paper jam has occurred at the input sensor, which can be either after the paper leaves the tray and enters the printer or in the manual feeder.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.

Light sequence:
What this light sequence means:
A paper jam has occurred in the manual feeder.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.
Using the operator panel


Light sequence:
What this light sequence means:
A paper jam has occurred as the paper is exiting the paper tray and entering the printer.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.

Light sequence:
What this light sequence means:
A paper jam has occurred as the paper is exiting the printer.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.
Using the operator panel


Light sequence:
What this light sequence means:
A paper jam has occurred in Tray 1.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.

Light sequence:
What this light sequence means:
A paper jam has occurred in Tray 2.
What you can do:
Clear the paper jam. See “How to clear paper jams” on page 26 for more information.
Using the operator panel


Light sequence:
What this light sequence means:
The page may not print correctly because the print information on the page is too complex (that is, too large for the printer’s memory).
What you can do:

Light sequence:
What this light sequence means:
The printer does not have enough memory to save the data in the buffer.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer memory does not have the free space necessary to collate the print job. This may happen due to one of these errors:
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer has received a request for a PPDS font which is not installed.
What you can do:

Light sequence:
What this light sequence means:
The printer detects defective flash memory.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer has insufficient memory to free unused space in flash memory.
What you can do:

Light sequence:
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:
Press Continue to clear the message and continue printing. (The job may not print correctly.)
Using the operator panel


Light sequence:
What this light sequence means:
The printer has lost the connection to an external print server (also called an external network adapter or ENA).
This light sequence is displayed if your printer is connected to the network, but it cannot detect the print server when you turn on the printer.
What you can do:

Light sequence:
What this light sequence means:
The printer USB or parallel port has been disabled.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer is processing data, but the memory used to store pages is full.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The paper length is too short to print the formatted data. This occurs when the printer does not know the media size loaded in the tray, or there is a problem feeding the media.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
There is not enough free space in the flash memory to store the data you are trying to download.
What you can do:
Using the operator panel


Light sequence:
What this light sequence means:
The printer detects unformatted flash memory.
What you can do:

Light sequence:
What this light sequence means:
The code in an internal print server has not been programmed, or the programmed code is not valid.
What you can do:
Download valid engine code to the internal print server.
Using the operator panel


Light sequence:
What this light sequence means:
The code in an internal print server has not been programmed, or the programmed code is not valid.
What you can do:
Download valid network code to the internal print server.
Using the operator panel

Printing the Printer Settings Configuration sheet 83
Configuration menus overview 84
To help resolve printing problems or to change printer configuration settings, advanced users can print the Printer Settings Configuration sheet for instructions on advancing through the configuration menus to select and save new settings.
To print the Printer Settings Configuration sheet:
1 Turn off the printer.
2 Open the front cover.
3 Press and hold Continue as you turn the printer back on.
All the lights cycle.
4 Close the cover. The light sequence that represents the Home menu is displayed.
5 To print the Printer Settings Configuration sheet, press and hold Continue until the lights cycle. The sheet prints.
Understanding the printer configuration menus
Section Page

Menus are represented by Ready, Toner Low/Replace PC Kit, Load Paper, and
Paper Jam light sequences. Menu items and their settings are indicated by Error and
Continue light sequences.
Understanding the printer configuration menus

Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network Opt ).
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
MAC Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Set Card Speed Automatically detect the connection speed of your network. You can disable this setting to set the speed manually.
† Megabits per second
Understanding the printer configuration menus
* Factory default

Use the Parallel menu to change printer settings on jobs sent through a parallel port.
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
Protocol Receive information at a much higher transmission rate if your printer is set to Fastbytes (if your computer supports Fastbytes) or receive information at a normal transmission rate if your printer is set to Standard.
Parallel Mode 2 Determine whether the parallel port data is sampled on the leading (On) or trailing (Off) edge of strobe.
MAC Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
Auto CR after LF Specify whether the printer automatically performs a carriage return after a line feed control command.
Auto LF after CR Specify whether the printer automatically performs a line feed after a carriage return control command.
Understanding the printer configuration menus
* Factory default · * Factory default

Use the USB menu to change printer settings on jobs sent through a Universal Serial Bus (USB) port.
NPA Mode Send print jobs to the printer and query printer status information simultaneously.
MAC Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Use the Utilities menu to troubleshoot printer problems.
Return your printer settings to the factory default values. Sometimes resetting the printer to the original settings solves formatting problems. All menu items are reset to the factory default values except:
All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. Resources in flash memory are unaffected.
Return the photoconductor counter to zero.
The replace photoconductor message should be cleared only when the photoconductor kit has been replaced.
Hex Trace Help isolate printing problems when unexpected characters print or characters are missing. Hex Trace helps you determine if there is a problem with the language interpreter or the cable by telling you what information your printer is receiving. To exit Hex Trace, turn off the printer.
Print Quality Test Pages
Help isolate print quality problems, such as streaking. When you select this setting, three pages print to help you evaluate print quality:
Understanding the printer configuration menus

How to install drivers for local printing 89
How to print the menu settings and network setup pages 94
How to print a test page 94
How to configure for TCP/IP 95
How to set up the printer for network printing 96
Using the printer resident Web page 102
Using the Local Printer Setup Utility 103
Software and network tasks
Section Page

A local printer is a printer attached to your computer using a USB or parallel cable. The printer driver is software that lets your computer communicate with your printer.
The procedure to install drivers depends on the operating system you are using. Use the following table to find driver installation instructions for your particular operating system. If you need additional help, refer to the documentation that shipped with your computer and your software.
Operating system Go to page...
Some Windows operating systems may already include a printer driver that is compatible with your printer. This may mean that installation will seem automatic in later versions of Windows. System printer drivers work well for simple printing, but they contain less functionality than our enhanced custom printer driver.
Installing a custom driver does not replace the system driver. A separate printer object is created and appears in the Printers folder.
Use the drivers CD that shipped with your printer to install the custom printer driver and obtain all the enhanced printer features and functionality.
Drivers are also available in downloadable software packages on our Lexmark Web site at www.lexmark.com.
1 Insert the drivers CD.
If the CD does not auto launch, click Start Æ Run, and then type D:\Setup.exe in the Run dialog box.
2 Click Install Software.
install printer drivers on your computer.
3 Click Printer and Software.
4 Click Agree to accept the license agreement.
5 Select Suggested, and then click Next.
6 Select Local Attached, and then click Next.
Software and network tasks
Windows 89 · Macintosh 91 · UNIX/Linux 93

7 Follow the instructions on your screen to complete installing the drivers.
1 Insert the drivers CD.
If the CD does not auto launch, click Start Æ Run, and then type D:\Setup.exe in the Run dialog box.
2 Click Install Software.
3 Click Printer and Software.
4 Click Agree to accept the license agreement.
5 Select Custom, and then click Next.
6 Follow the instructions on your screen to complete installing the drivers.
Software and network tasks

Macintosh OS 8.6 or later is required for USB printing. To print locally to a USB-attached printer, you must create a desktop printer icon (Macintosh 8.6–9.x) or create a queue in Print Center (Macintosh OS X).
1 Install a printer PostScript Printer Description (PPD) file on your computer.
a Insert the drivers CD.
b Double-click Classic, and then double-click the installer package for your printer.
Macintosh computer.
c Choose the language you want to use, and then click OK.
d Click Accept after you read the license agreement.
e Click Continue after you finish with the Readme file.
f Choose a default paper size.
g On the Easy Install screen, click Install. All the necessary files are installed on your computer.
h Click Quit when installation is complete.
Lexmark Web site at www.lexmark.com.
2 Do one of the following:
Macintosh 8.6–9.0: Open Apple LaserWriter.
Macintosh 9.1–9.x: Open Applications, and then click Utilities.
3 Double-click Desktop Printer Utility.
4 Select Printer (USB), and then click OK.
5 In the USB Printer Selection section, click Change.
If your printer does not appear in the USB Printer Selection list, make sure the USB cable is properly connected and the printer is turned on.
6 Select the name of your printer, and then click OK. Your printer appears in the original Printer (USB) window.
7 In the PostScript Printer Description (PPD) File section, click Auto Setup. Make sure your printer PPD now matches your printer.
Software and network tasks

8 Click Create, and then click Save.
9 Specify a printer name, and then click Save. Your printer is now saved as a desktop printer.
1 Install a printer PostScript Printer Description (PPD) file on your computer.
a Insert the drivers CD.
b Double-click Mac OS X, and then double-click the installer package for your printer.
Macintosh computer.
c On the Authorization screen, choose Click the lock to make changes.
d Enter your password, and then click OK.
e Click Continue on the Welcome screen and again after you view the Readme file.
f Click Agree to accept the license agreement.
g Select a Destination, and then click Continue.
h On the Easy Install screen, click Install. All the necessary files are installed on your computer.
i Click Close when installation is complete.
2 Open Finder, click Applications, and then click Utilities.
3 Double-click Print Center.
Lexmark Web site at www.lexmark.com.
4 Do one of the following:
If your USB-attached printer appears in the Printer List, you can quit Print Center. A queue has been created for your printer.
If your USB-attached printer does not appear in the Printer List, make sure the USB cable is properly connected and the printer is turned on. After the printer appears in the Printer List, you can quit Print Center.
Software and network tasks

Local printing is supported on many UNIX and Linux platforms, such as Sun Solaris and Red Hat.
The Sun Solaris and Linux packages are available on the drivers CD and on our Lexmark Web site at www.lexmark.com. The User’s Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
All the printer driver packages support local printing using a parallel connection. The driver package for Sun Solaris supports USB connections to Sun Ray appliances and Sun workstations.
Visit our Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Software and network tasks

To print the menu settings page and network setup page, press the Continue button from the Ready state.
– Verify that the options you installed are correctly listed under “Installed Features.”
If an option is not listed under Installed Features, turn off the printer, unplug the power cord, and reinstall the option.
– Verify the amount of memory installed is correctly listed under “Printer Information.” – Verify that the paper trays are configured for the sizes and types of paper you loaded.
If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another network setup page to verify that you are connected to your network.
1 Click Start Æ Settings Æ Printers.
2 Select your printer.
3 Click File Æ Properties.
4 Click Print Test Page.
1 From the desktop, double-click your printer icon.
2 Double-click <printer name> Utility.
3 Click the Print a Test Page button.
Software and network tasks

If you have TCP/IP available on your network, we recommend that you assign an IP address to the printer.
If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the printer.
1 Look for the address under the “TCP/IP” heading on the network setup page you printed in “How to print the menu settings and network setup pages” on page 94.
2 Go to “Verifying the IP settings” on page 95 and begin with step 2.
If your network is not using DHCP, then you must manually assign an IP address to the printer.
An easy way to do this is to use the Print Server TCP/IP Setup Utility.
Detailed instructions about installing and using this utility are located on the drivers CD that shipped with your printer. Launch the CD, click View Documentation and then Network Printer Install. Look for information about using the Print Server TCP/IP Setup Utility.
To use this utility, you will need to know the printer’s 12-digit physical address or Universally Administered Address (UAA). Look for the UAA entry on the network setup page you printed earlier. You can use either the MSB or canonical form of the UAA.
1 Print another network setup page. Look under the “TCP/IP” heading and make sure the IP address, netmask, and gateway are what you expected.
See “How to print the menu settings and network setup pages” on page 94 if you need help.
Command prompt (or Accessories Æ Command prompt if using Windows 2000).
2 Ping the printer and verify that it responds. For example, at a command prompt on a network computer type ping followed by the new printer IP address (for example, 192.168.0.11):
If the printer is active on the network, you will receive a confirmation.
Software and network tasks

After you have assigned and verified the TCP/IP settings (see “How to configure for TCP/IP” on page 95), you are ready to install the printer drivers on each network computer.
In Windows environments, network printers can be configured for direct printing or shared printing. Both network printing methods require the installation of a printer driver and the creation of a network printer port.
System drivers are built into Windows operating systems. Custom drivers are available on the drivers CD.
Updated system and custom drivers are available on our Lexmark Web site at www.lexmark.com.
Supported network printer ports
For basic printer functionality, you can install a system printer driver and use a system network printer port, such as an LPR or a Standard TCP/IP port. The system printer driver and port let you maintain a consistent user interface for use with all the printers on your network. However, using a custom printer driver and network port provides enhanced functionality, such as printer status alerts.
Follow the steps for your printing configuration and operating system to configure your network printer:
Printing configuration Operating system Go to page...
Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003
Printer is connected directly to the network using a network cable, such as Ethernet.
Printer drivers are typically installed on each network computer.
Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003
Printer is connected to one of the computers on the network using a local cable, such as USB.
Printer drivers are installed on the computer attached to the printer.
During driver installation, the printer is set up to be “shared” so that other network computers can print to it.
Software and network tasks
Supported printer drivers · Direct · Shared

Direct printing using Windows 95/98,Me, Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003
To install a custom printer driver and network port:
1 Launch the drivers CD.
2 Click Install Printer and Software.
3 Click Printer.
4 Click Agree to accept the license agreement.
5 Select Quick install, and then click Next.
6 Click Create new port.
7 Click Add Port.
8 Select Lexmark TCP/IP Network Port, and then click Add.
9 Enter the information to create the port.
a Assign a logical port name.
This can be any name that you associate with the printer, such as Color1-lab4. After the port is created, this name appears in the list of available ports on the Method of Connection screen.
TCP/IP heading. For help, see “How to print the menu settings and network setup pages” on page 94.
b Enter the IP address in the text box.
c Click Add Port.
10 Click Done until you return to the Method of Connection screen.
11 Select the newly-created port from the list, and then select the model of the printer you want to install.
12 Click Finish to complete the installation.
13 Print a test page to verify printer installation (see “How to print a test page” on page 94).
Shared printing from a server using Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003
After connecting your printer to a Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 computer (which will act as a server), follow these steps to configure your network printer for shared printing:
Software and network tasks

1 Insert the drivers CD.
If the CD does not auto launch, click Start Æ Run, and then type D:\Setup.exe in the Run dialog box.
2 Click Install Software.
3 Click Printer and Software.
4 Click Agree to accept the license agreement.
5 Select Suggested, and then click Next.
6 Select Local Attached, and then click Next.
7 Follow the instructions on your screen to complete installing the drivers.
8 Print a test page to verify printer installation (see “How to print a test page” on page 94).
1 Click Start Æ Settings Æ Printers.
2 Select the printer you just created.
3 Click File Æ Sharing.
4 Check the Shared check box, and then enter a name in the Shared Name text box.
5 In the Alternate Drivers section, select the operating systems of all the network clients that will print to the printer.
6 Click OK.
system CD.
7 Check the following to make sure the printer was successfully shared.
Using the point and print method
modifications and the print job processing. This lets network clients return to programs much faster.
Software and network tasks

With this method, a subset of driver information is copied from the server to the client computer. This is just enough information to send a print job to the printer.
1 On the Windows desktop of the client computer, double-click Network Neighborhood.
2 Locate the host name of the server computer, and then double-click the host name.
3 Right-click the shared printer name, and then click Install.
4 Wait a few minutes for the driver information to be copied from the server computer to the client computer, and for a new printer object to be added to the Printers folder. The time this takes varies based on network traffic and other factors.
5 Close Network Neighborhood.
6 Print a test page to verify printer installation (see “How to print a test page” on page 94).
Using the peer-to-peer method
With this method, the printer driver is fully installed on each client computer. Network clients retain control of driver modifications. The client computer handles the print job processing.
1 Click Start Æ Settings Æ Printers.
2 Click Add Printer to launch the Add Printer wizard.
3 Click Network Print Server.
4 Select the network printer from the Shared printers list. If the printer is not listed, enter the path of the printer in the text box.
The path will look similar to the following:
\\<server host name>\<shared printer name>
driver is available, then you need to provide a path to available drivers.
The server host name is the name of the server computer that identifies it to the network. The shared printer name is the name assigned during the server installation process.
5 Click OK.
6 Select whether you want this printer to be the default printer for the client, and then click Finish.
7 Print a test page to verify printer installation (see “How to print a test page” on page 94).
Software and network tasks

capabilities of a printer to your UNIX or Macintosh computers.
To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and either create a desktop printer on the computer (Mac OS 8.6 to 9.x) or create a print queue in Print Center (Mac OS X). Follow the instructions for your operating system.
set up. If the printer was previously installed, go on to Step 2: Create a desktop printer.
1 Insert the drivers CD.
2 Double-click Classic.
3 Double-click the Lexmark Installer icon.
4 Select the language of your operating system, and then click OK.
5 Click Install to install the PPD file for your printer.
1 In the Chooser, select the LaserWriter 8 driver.
2 If you have a routed network, select the default zone from the list. If you don’t know which zone to select, look on the Network Setup page under AppleTalk for Zone.
3 Select the new printer from the list.
4 If you don’t know which printer to select, look on the Network Setup page under the AppleTalk heading to find the default name of the printer.
5 Click Create.
6 Make sure there is an icon next to the printer name in the Chooser.
7 Close the Chooser window.
8 Verify printer installation.
a Click the desktop printer icon you just created.
b Choose Printing Æ Change Setup.
Software and network tasks

1 Insert the drivers CD.
2 Click Mac OS X Æ <language>.
For example, Mac OS X Æ English.
3 Double-click the installer icon for your printer to run the installer.
1 Click Applications Æ Utilities Æ Print Center.
2 Click Add Printer.
3 Choose AppleTalk as your method of connection.
4 If you have a routed network, select the zone from the list. If you don’t know which zone to select, look on the Network Setup page under AppleTalk for Zone.
5 Select the new printer from the list, and then click Add.
AppleTalk heading to find the default name of the printer.
6 Verify printer installation:
a Click Applications Æ TextEdit.
b Choose File Æ Print Æ Summary. The Summary window shows the PPD installed for your printer.
Software and network tasks

Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Visit our Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms.
Lexmark Web site at www.lexmark.com.
Lexmark provides a printer driver package for each supported UNIX and Linux platform. The User’s Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments.
You can download these packages from our Lexmark Web site. You may also find the driver package you need on the drivers CD.
Your printer supports both Novell Distributed Print Services (NDPS) and regular queue-based NetWare environments. For the latest information about installing a network printer in a NetWare environment, launch the drivers CD and click View Documentation.
If you have a network model, your printer has a resident Web page, which you can access from your browser. To access the resident Web page, type the printer’s IP address in the URL address field of your browser (for example, http://192.168.236.24). If you do not know the IP address of your printer, you can find it on the network setup page (for help, see “How to print the menu settings and network setup pages” on page 94).
Some of the resident Web page features include a real-time status window of the printer and details of the printer’s configuration, such as current memory and engine code levels. If you have administrative rights, you can also change printer settings.
Software and network tasks

The Local Printer Setup Utility, located on the drivers CD, lets you change printer settings not available from your printer driver (for example, activating Alarm Control if you want the printer to sound an alarm when it needs attention).
Click View Documentation on the drivers CD for instructions on installing and using the Local Printer Setup Utility on your computer.
You can change the following settings using the Local Printer Setup Utility:
Finishing Settings Paper Settings Parallel Settings PCL Emulation Settings
PostScript Settings Quality Settings Setup Settings USB Settings
* Per supported sources † Per custom type number ‡ Per supported media
Software and network tasks

What supplies do I need and how do I order them? 105
How to conserve supplies 105
How to know when you need new supplies 106
How to change a toner cartridge 108
Lexmark Return Program 111
Recycling Lexmark products 111
How to change a photoconductor kit 112
Section Page · Supplies information

There are only two supply items that have to be replaced on a regular basis: the toner cartridge and the photoconductor kit, which together comprise the print cartridge assembly. The photoconductor kit typically lasts up to 30,000 pages (at approximately 5% coverage), whereas the toner cartridge has to be replaced more frequently. How often the toner cartridge needs replacing depends on which cartridge you purchase and the average amount of toner coverage you have on your print jobs.
Within the United States or Canada, you can order Lexmark supplies from any authorized Lexmark supplies dealer. To locate the dealer nearest you, call 1-800-539-6275. In other countries, visit the Lexmark online store at www.lexmark.com or contact the place where you bought your printer.
Choose a cool, clean storage area for your printer supplies. Store supplies right side up in their original packaging until you are ready to use them.
Do not expose supplies to:
Conserving supplies lowers printing costs.
Supplies information

The following sections describe a couple ways to determine when new supplies are needed.
You can determine approximately how much toner is left in your cartridge and how full the photoconductor kit is by printing out a menu settings page. This helps you decide when you might need to order replacement supplies. For help printing a menu settings page, see “How to print the menu settings and network setup pages” on page 94.
Also, the Toner low light sequence (see page 63) is displayed when the toner cartridge is nearly empty. You can still print for a short time while this sequence is displayed, but print quality begins to decrease as the toner level decreases.
To ensure print quality and to avoid damage to the printer, the printer stops operating after the photoconductor kit has reached a maximum of 40,000 pages. (See “Replace photoconductor kit (printer hard stop)*” on page 107 for the light sequence associated with this stop.) The printer automatically notifies you before the photoconductor reaches this point. To avoid having the printer stop operating, replace the photoconductor kit when you first receive the “Replace photoconductor kit” light sequence.
While the printer may continue to function properly after the photoconductor kit has reached its official end-of-life (approximately 30,000 pages), print quality begins to significantly decrease until the photoconductor stops operating at the maximum of 40,000 pages.
Supplies information

The operator panel displays certain light sequences to let you know when the toner level is low or when it’s time to replace the photoconductor kit.

* If the operator panel lights display this sequence, the printer will not print any more jobs until the photoconductor kit is replaced.
“Toner low” and “Replace photoconductor kit” lights.
Supplies information

light for an extended period of time. Extended light exposure can cause print quality problems.
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.
Supplies information

2 Remove the toner cartridge:
a Press the button on the base of the print cartridge assembly.
b Pull the toner cartridge up and out using the handle.

3 Unpack the new toner cartridge.
back to Lexmark for recycling. See “Lexmark Return Program” on page 111 for more information.
4 Rotate the cartridge in all directions to distribute the toner.

b · Supplies information

5 Install the new toner cartridge by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor kit and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.
6 Close the front cover.
Supplies information

The Lexmark Return Program is an environmental program in which Lexmark sells new toner cartridges at a special price with the agreement that you will return them, at no cost, only to Lexmark for recycling.
Regular toner cartridges without this agreement are also available.
Lexmark Cartridge Collection Program. To learn how to return a cartridge at no cost in your country, visit Lexmark’s Web site at www.lexmark.com/recycle.
Lexmark Return Program toner cartridges cannot be refilled. Lexmark does not recommend the use of third-party remanufactured cartridges. Lexmark cannot assure the excellent print quality and reliability of its toner cartridges after a toner cartridge has been refilled. A substantial reduction in photoconductor kit life is also likely if refilled toner cartridges are used.
printer. Printer failures caused by third-party remanufactured toner cartridges are not covered by your Lexmark printer warranty, extended warranty, or service agreement.
To return your Lexmark products to Lexmark for recycling:
1 Visit our Web site:
2 Follow the instructions on your screen.
Supplies information

photoconductor kit exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems.
1 Open the front cover by pressing the button on the left side of the printer and lowering the cover.
Supplies information

2 Pull the print cartridge assembly out of the printer by pulling on the toner cartridge handle.

Place the print cartridge assembly on a flat, clean surface.
3 Remove the toner cartridge:
a Press the button on the base of the print cartridge assembly.
b Pull the toner cartridge up and out using the handle.

4 Unpack the new photoconductor kit.
a · b · Supplies information

5 Install the toner cartridge into the new print cartridge assembly by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor kit and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.

6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it will go.

7 Close the front cover.
instruction sheet that shipped with the new kit.
Supplies information

Print quality problems 118
Section Page · General problems 116 · Troubleshooting

Problem / Question Solution / Answer
What do the blinking lights mean?
See “Understanding the operator panel lights” on page 52 for information about what each light pattern means.
Why am I missing characters when I print on envelopes?
If you see voids (missing characters) when printing envelopes, check your printer driver settings to make sure you selected Envelope from the Paper Type menu.
If Envelope is already selected, try changing the texture setting to a rougher setting. Sometimes toner does not adhere well to smooth-textured envelopes. From your printer driver, select Custom 6-Rough Env from the Paper Type menu.
To change Custom 6 back to its default settings for Paper Type, Paper Texture, and Paper Weight, use the Local Printer Setup Utility on the drivers CD that shipped with your printer. If you already installed the printer drivers and utilities, skip to step 7.
1 Insert the drivers CD into your computer.
2 Click Printer Software.
3 Click Agree.
4 Select Local Printer Install, and then click Next.
5 Select your printer and port, and make sure Local Printer Setup Utility is checked.
6 Click Finish.
The Utility will be installed on your computer under Program Files (unless you chose a different directory).
7 Open the Local Printer Setup Utility.
8 From the Paper Menu, scroll through the menu items until you see the Custom menu setting.
9 Click Custom.
10 Scroll down to Custom 6 Paper Type.
11 Select envelope for the Custom 6 paper type, heavy for the Custom 6 paper weight, and rough for the Custom 6 paper texture.
12 From the toolbar, click Actions.
13 Click Apply to save the changes you made.
14 Click File Æ Exit to close the Local Printer Setup Utility.
How do I clear a paper jam?
See “How to clear paper jams” on page 26 for information about clearing jams.
The toner low light sequence is on, but I don’t have another cartridge to put in yet. Can I still print with the low cartridge?
Yes, you can still print. To extend the life of you toner cartridge somewhat, remove the cartridge, rotate it in all directions to distribute the toner, then insert it back into the printer.
When the toner low light sequence is first displayed, you should still be able to print approximately 1200 pages, based on approximately 5% coverage of pages.
The printer seems to print slower when using the manual feeder.
This is normal. The printer sometimes prints at a slightly slower speed when feeding print media from the manual feeder.
Troubleshooting

Problem / Question Solution / Answer
I want to manually duplex card stock, but I’m having trouble getting it to feed.
The problem is that when the printer tries to manually duplex a print job, it always prints side 2 from Tray 1. However, Tray 1 does not support card stock.
To achieve the desired effect, you have to send both pages of the print job as separate jobs. After the first page has printed, reload the card stock in the manual feeder. Load the card stock in the feeder with the already-printed side down, with the top of the sheet first.
Paper stacks poorly in the output bin.
Extend the paper support on the output bin.
Dust is gathering on the paper tray when it is extended.
Attach the dust cover to the back of the printer. This protects the paper tray from the environment as well as keep the tray from being knocked out of position while it is extended.
See Attaching the dust cover for information about attaching the dust cover. The paper tray is getting bumped and pushed out the front of the printer when it is extended.
Troubleshooting

You can solve many print quality problems by replacing a supply or maintenance item that has reached the end of its intended life. Use the following table to find solutions to print quality problems.
Try the following in this order:
1 Clean the printhead lens. (See “How to clean the printhead lens” on page 122.)
2 Replace the toner cartridge.
3 Replace the fuser*.
Streaked horizontal lines The toner cartridge or fuser may be defective, empty, or worn.
Replace the toner cartridge or fuser* as needed.
* To replace the fuser, call a service technician. † This setting can be changed using the Local Printer Setup Utility. See “Using the Local Printer Setup
Utility” on page 103 for more information.
Symptom Cause Solution · Troubleshooting

Transparency print quality is poor
(Print has inappropriate light or dark spots, toner is smeared, or horizontal or vertical light bands appear.)
Toner rubs off the paper easily when you handle the sheets
* To replace the fuser, call a service technician. † This setting can be changed using the Local Printer Setup Utility. See “Using the Local Printer Setup
Utility” on page 103 for more information.
Symptom Cause Solution · Troubleshooting

(Print only appears on one side of the page.)
Incorrect margins The Form Size setting in the printer driver is different than the size paper that is loaded in the tray. For example, you inserted A4 size paper into the selected tray but did not set the Form Size to A4.
Set the Form Size to A4.
(Print is inappropriately slanted.)
* To replace the fuser, call a service technician. † This setting can be changed using the Local Printer Setup Utility. See “Using the Local Printer Setup
Utility” on page 103 for more information.

Blank pages The toner cartridge is defective or empty.
Replace the toner cartridge.
Paper curls badly once it prints and exits to the bin
The Paper Texture setting is wrong for the type of paper or specialty media you are using.
Change Paper Texture† from Rough to Normal or Smooth.
* To replace the fuser, call a service technician. † This setting can be changed using the Local Printer Setup Utility. See “Using the Local Printer Setup
Utility” on page 103 for more information.
Symptom Cause Solution · Troubleshooting

You can solve some print quality problems by cleaning the printhead lens.
1 Turn the printer off.
2 Open the front cover by pressing the button on the left side of the printer and lowering the cover.
Troubleshooting

3 Remove the print cartridge assembly out of the printer by pulling on the toner cartridge handle.
Place the print cartridge assembly on a flat, clean surface.
period of time. Extended light exposure can cause print quality problems.
Troubleshooting

4 Locate the glass printhead lens, which is located within the recessed area in the top of the printer.

5 Gently wipe the printhead lens with a clean, dry, lint-free cloth.
6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it will go.

7 Close the front cover.
8 Turn the printer on.
Troubleshooting


Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| What do the blinking lights mean? | See “Understanding the operator panel lights” on page 52 for information about what each light pattern means. | p.116 | |
| Why am I missing characters when I print on envelopes? | If you see voids (missing characters) when printing envelopes, check your printer driver settings to make sure you selected Envelope from the Paper Type menu. If Envelope is already selected, try changing the texture setting to a rougher setting. Sometimes toner does not adhere well to smooth-textured envelopes. From your printer driver, select Custom 6-Rough Env from the Paper Type menu. To change Custom 6 back to its default settings for Paper Type, Paper Texture, and Paper Weight, use the Local Printer Setup Utility on the drivers CD that shipped with your printer. If you already installed the printer drivers and utilities, skip to step 7. 1 Insert the drivers CD into your computer. 2 Click Printer Software. 3 Click Agree. 4 Select Local Printer Install, and then click Next. 5 Select your printer and port, and make sure Local Printer Setup Utility is checked. 6 Click Finish. The Utility will be installed on your computer under Program Files (unless you chose a different directory). 7 Open the Local Printer Setup Utility. 8 From the Paper Menu, scroll through the menu items until you see the Custom menu setting. 9 Click Custom. 10 Scroll down to Custom 6 Paper Type. 11 Select envelope for the Custom 6 paper type, heavy for the Custom 6 paper weight, and rough for the Custom 6 paper texture. 12 From the toolbar, click Actions. 13 Click Apply to save the changes you made. 14 Click File Æ Exit to close the Local Printer Setup Utility. | p.116 | |
| How do I clear a paper jam? | See “How to clear paper jams” on page 26 for information about clearing jams. | p.116 | |
| The toner low light sequence is on, but I don’t have another cartridge to put in yet. Can I still print with the low cartridge? | Yes, you can still print. To extend the life of you toner cartridge somewhat, remove the cartridge, rotate it in all directions to distribute the toner, then insert it back into the printer. When the toner low light sequence is first displayed, you should still be able to print approximately 1200 pages, based on approximately 5% coverage of pages. | p.116 | |
| The printer seems to print slower when using the manual feeder. | This is normal. The printer sometimes prints at a slightly slower speed when feeding print media from the manual feeder. | p.116 | |
| I want to manually duplex card stock, but I’m having trouble getting it to feed. | The problem is that when the printer tries to manually duplex a print job, it always prints side 2 from Tray 1. However, Tray 1 does not support card stock. To achieve the desired effect, you have to send both pages of the print job as separate jobs. After the first page has printed, reload the card stock in the manual feeder. Load the card stock in the feeder with the already-printed side down, with the top of the sheet first. | p.117 | |
| Paper stacks poorly in the output bin. | Extend the paper support on the output bin. | p.117 | |
| Dust is gathering on the paper tray when it is extended. | Attach the dust cover to the back of the printer. This protects the paper tray from the environment as well as keep the tray from being knocked out of position while it is extended. See Attaching the dust cover for information about attaching the dust cover. | p.117 | |
| The paper tray is getting bumped and pushed out the front of the printer when it is extended. | p.117 | ||
| White lines ABCDE ABCDE ABCDE | • The printhead lens is dirty. • Either the toner cartridge or the fuser is defective. | Try the following in this order: 1 Clean the printhead lens. (See “How to clean the printhead lens” on page 122.) 2 Replace the toner cartridge. 3 Replace the fuser*. | p.118 |
| Streaked horizontal lines ABCDE ABCDE ABCDE | The toner cartridge or fuser may be defective, empty, or worn. | Replace the toner cartridge or fuser* as needed. | p.118 |
| Streaked vertical lines ABCDE ABCDE ABCDE | • Toner is smeared before fusing to the paper. • The toner cartridge is defective. | • If paper is stiff, try feeding from another tray or the manual feeder. • Replace the toner cartridge. | p.118 |
| Print irregularities ABCDE ABCDE ABCDE | • Paper has absorbed moisture due to high humidity. • You are using paper that does not meet the printer specifications. • The fuser is worn or defective. | • Load paper from a fresh package in the paper tray. • Avoid textured paper with rough finishes. • Make sure the printer driver paper type setting matches the type of paper you are using. • Replace the fuser*. | p.118 |
| * To replace the fuser, call a service technician. † This setting can be changed using the Local Printer Setup Utility. See “Using the Local Printer Setup Utility” on page 103 for more information. | p.118 | ||
| Print too light | • The Toner Darkness setting is too light. • You are using paper that does not meet the printer specifications. • The toner cartridge is low on toner. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Load paper from a new package. • Avoid textured paper with rough finishes. • Make sure the paper you load in the trays is not damp. • Replace the toner cartridge. | p.119 |
| Print too dark | • The Toner Darkness setting is too dark. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Replace the toner cartridge. | p.119 |
| Transparency print quality is poor (Print has inappropriate light or dark spots, toner is smeared, or horizontal or vertical light bands appear.) | • You are using transparencies that do not meet the printer specifications. • The Form Type setting in the printer driver is set to something other than transparency. | • Use only transparencies recommended by the printer’s manufacturer. • Make sure the Form Type setting is set to transparency. | p.119 |
| Toner specks | • The toner cartridge is defective. • The fuser is worn or defective. • Toner is in the paper path. | • Replace the toner cartridge. • Replace the fuser*. • Call for service. | p.119 |
| Toner rubs off the paper easily when you handle the sheets | • The Paper Texture setting is wrong for the type of paper or specialty media you are using. • The Paper Weight setting is wrong for the type of paper or specialty media you are using. • The fuser is worn or defective. | • Change Paper Texture† from Normal to Smooth or Rough. • Change Paper Weight† from Plain to CardStock (or other appropriate weight). • Replace the fuser*. | p.119 |
| Gray background ABCDE ABCDE ABCDE | • The Toner Darkness setting is too dark. • The toner cartridge is defective. | • Select a different Toner Darkness† setting from the printer driver before sending the job to print. • Replace the toner cartridge. | p.119 |
| Uneven print density ABCDE ABCDE ABCDE | • The toner cartridge is defective. | • Replace the toner cartridge. | p.120 |
| Ghost Images | • The Form Type setting in the printer driver is set incorrectly. • Toner level is low in the toner cartridge. | • Make sure the Form Type setting is correct for the paper or specialty media you are using. • Replace the toner cartridge. | p.120 |
| Uneven printing DE DE DE (Print only appears on one side of the page.) | • The toner cartridge is not properly installed. | • Remove and then reinsert the toner cartridge. | p.120 |
| Incorrect margins | The Form Size setting in the printer driver is different than the size paper that is loaded in the tray. For example, you inserted A4 size paper into the selected tray but did not set the Form Size to A4. | Set the Form Size to A4. | p.120 |
| Skewed print (Print is inappropriately slanted.) | • The guides in the selected tray are not in the correct position for the paper size loaded in the tray. • The manual feeder’s guides are not in the correct position for the paper size loaded in the feeder. | • Move the guides in the tray so that they are snug against the sides of the paper. • Move the manual feeder’s guides so that they are snug against the sides of the paper. | p.120 |
| Blank pages | The toner cartridge is defective or empty. | Replace the toner cartridge. | p.121 |
| Solid black pages | • The toner cartridge is defective. • Your printer requires servicing. | • Replace the toner cartridge. • Call for service. | p.121 |
| Paper curls badly once it prints and exits to the bin | The Paper Texture setting is wrong for the type of paper or specialty media you are using. | Change Paper Texture† from Rough to Normal or Smooth. | p.121 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.