EN
Lexmark logo
Official user manual

Lexmark 210

217 pages·2.8 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 210
Table of Contents 376 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 1 of the Lexmark 210 user manual — www.lexmark.com
Page 1 · click to enlarge
Page 1
Lexmark 210 diagram (page 1)
Fig. 1

C734 and C736 Series

User's Guide

www.lexmark.com

Machine types/model numbers: 5026: 210, 230, 280, 410, 430, 480 4976: n01, n02, n03, gn1, gn2, dn1, dn2, dn3, gd1, gd2, dw1, dw2, gw1, gw2 4977: n01, n02, n03, gn1, gn2, dn1, dn2, dn3, gd1, gd2

Page 2 of the Lexmark 210 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 9 of the Lexmark 210 user manual — Safety information
Page 9 · click to enlarge
Page 9
Lexmark 210 — Safety information diagram (page 9)
Fig. 2 · Safety information

Safety information

Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible.

CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.

Do not place or use this product near water or wet locations.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Safety information

Page 10 of the Lexmark 210 user manual — Safety information
Page 10 · click to enlarge
Page 10

This product contains a lithium battery.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Safety information

Page 11 of the Lexmark 210 user manual — Customer support
Page 11 · click to enlarge
Page 11

Learning about the printer

Finding information about the printer

Setup information

DescriptionWhere to find The Setup information gives you instructions for setting up the printer. Follow the set of instructions for local, network, or wireless, depending on what you need.You can find the Setup information in the printer box or on the Lexmark Web site at www.lexmark.com.

Wireless Setup Guide

DescriptionWhere to find If your printer has built-in wireless functionality, a Wireless Setup Guide gives you instructions for connecting the printer wirelessly.You can find the Wireless Setup Guide in the printer box or on the Lexmark Web site at www.lexmark.com.

Help

DescriptionWhere to find The Help gives you instructions for using the software.While in any Lexmark software program, click Help, Tips ª Help, or Help ª Help Topics.

Customer support

DescriptionWhere to find (North America)Where to find (rest of world) Telephone supportCall us at • US: 1-800-332-4120 Monday–Friday (8:00 AM–11:00 PM ET) Saturday (Noon–6:00 PM ET) • Canada: 1-800-539-6275 Monday–Friday (8:00 AM–11:00 PM ET) Saturday (Noon–6:00 PM ET) • Mexico: 001-888-377-0063 Monday–Friday (8:00 AM–8:00 PM ET) Note: Telephone numbers and support times may change without notice. For the most recent telephone numbers available, see the printed warranty statement that came with your printer.Telephone numbers and support hours vary by country or region. Visit our Web site at www.lexmark.com. Select a country or region, and then select the Customer Support link. Note: For additional information about contacting Lexmark, see the printed warranty that came with your printer.

Learning about the printer

Page 12 of the Lexmark 210 user manual — Selecting a location for the printer
Page 12 · click to enlarge
Page 12
DescriptionWhere to find (North America)Where to find (rest of world) E-mail supportFor e-mail support, visit our Web site: www.lexmark.com. 1 Click SUPPORT. 2 Click Technical Support. 3 Select your printer type. 4 Select your printer model. 5 From the Support Tools section, click e-Mail Support. 6 Complete the form, and then click Submit Request.E-mail support varies by country or region, and may not be available in some instances. Visit our Web site at www.lexmark.com. Select a country or region, and then select the Customer Support link. Note: For additional information about contacting Lexmark, see the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:
Lexmark 210 — Selecting a location for the printer diagram (page 12)
Fig. 3 · Selecting a location for the printer

1 152.4 mm (6.0 in.)

2101.6 mm (4.0 in.) 3609.6 mm (24.0 in.)

Learning about the printer

Page 13 of the Lexmark 210 user manual — Configured models
Page 13 · click to enlarge
Page 13

4 101.6 mm (4.0 in.)

5 304.8 mm (12.0 in.)

When the printer is set up, allow clearance around it as shown.

Printer configurations

Basic model

Lexmark 210 — Basic model diagram (page 13)
Fig. 4 · Basic model

1 Standard exit bin

3 Printer control panel

4 Standard 550-sheet tray (Tray 1)

Configured models

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Learning about the printer

2 Paper support · 5 Multipurpose tray

Page 14 of the Lexmark 210 user manual — Printer configurations
Page 14 · click to enlarge
Page 14
Lexmark 210 — Printer configurations diagram (page 14)
Fig. 5 · Printer configurations

1 Standard exit bin

3 Printer control panel

4 Optional 550-sheet specialty media drawer

5 Optional 550-sheet tray

6 Optional 2,000-sheet tray

7 Standard 550-sheet tray (Tray 1)

Learning about the printer

2 Paper support · 8 Multipurpose tray

Page 15 of the Lexmark 210 user manual — Understanding the printer control panel
Page 15 · click to enlarge
Page 15

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. Once locked, the metal plate and the system board cannot be removed. Attach a security lock to the printer in the location shown.

Lexmark 210 — Using the security lock feature diagram (page 15)
Fig. 6 · Using the security lock feature

Understanding the printer control panel

Lexmark 210 — Understanding the printer control panel diagram (page 15)
Fig. 7 · Understanding the printer control panel

Control panel item Description

1 Display The display shows messages and pictures that communicate the status of the printer.

Lexmark 210 — Understanding the printer control panel diagram (page 15)
Fig. 8 · Understanding the printer control panel

initiates action on a menu item.

Learning about the printer

2 Select · Pressing

Page 16 of the Lexmark 210 user manual — Using the security lock feature
Page 16 · click to enlarge
Page 16

Control panel item Description

Lexmark 210 — Using the security lock feature diagram (page 16)
Fig. 9 · Using the security lock feature

Press the up or down arrow button to scroll through menu lists.

Press the left or right arrow button to scroll through values or text that rolls to another screen.

Lexmark 210 — Using the security lock feature diagram (page 16)
Fig. 10 · Using the security lock feature

Consists of the numbers 0–9, characters A through Z, an

, and a backspace button.

button functions as Caps Lock, and includes the # character.

Lexmark 210 — Using the security lock feature diagram (page 16)
Fig. 11 · Using the security lock feature

Returns the display to the previous screen

6 Indicator light Indicates the printer status:

  • Off—The power is off, or the printer is in Eco Mode.
  • Blinking green—The printer is warming up, processing data, or printing.
  • Solid green—The printer is on, but idle.
  • Solid red—Operator intervention is needed.

Stops all printer activity

A list of options is offered once Stopped appears on the display.

Lexmark 210 — Using the security lock feature diagram (page 16)
Fig. 12 · Using the security lock feature

Opens the menus index

9 USB Direct port Insert a USB flash drive to send data to the printer. Insert a USB cable from a digital camera to print photos with a PictBridge– enabled digital camera.

Learning about the printer

Show 5 more labels / short text on this page
3 Navigation buttons · 4 Numeric keypad · 5 Back · 7 Stop · 8 Menus
Page 17 of the Lexmark 210 user manual — Available internal options
Page 17 · click to enlarge
Page 17

Additional printer setup

Installing internal options

You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal.

Available internal options

  • Memory cards – Printer memory – Flash memory – Fonts
  • Firmware cards – Bar Code – PrintCryption TM
  • Printer hard disk
  • Lexmark TM Internal Solutions Ports (ISP) – RS-232-C Serial ISP – Parallel 1284-B ISP – MarkNet TM N8150 802.11 b/g/n Wireless ISP – MarkNet N8130 10/100 Fiber ISP – MarkNet N8120 10/100/1000 Ethernet ISP

Additional printer setup

Page 18 of the Lexmark 210 user manual — Accessing the system board to install internal options
Page 18 · click to enlarge
Page 18

Accessing the system board to install internal options

1 Remove the cover. a Turn the screws on the cover counterclockwise to loosen them, but do not remove them.

Lexmark 210 — Accessing the system board to install internal options diagram (page 18)
Fig. 13 · Accessing the system board to install internal optio…

b Slide the cover up until each screw is in the keyhole.

Lexmark 210 — Accessing the system board to install internal options diagram (page 18)
Fig. 14 · Accessing the system board to install internal optio…

c Pull the cover forward to remove it.

Additional printer setup

Page 19 of the Lexmark 210 user manual — Installing a memory card
Page 19 · click to enlarge
Page 19

2 Use the following illustration to locate the appropriate connector.

Lexmark 210 — Installing a memory card diagram (page 19)
Fig. 15 · Installing a memory card

1 Firmware and flash memory card connectors

2 Hard disk connector

3 Internal print server connector

4 Memory card connector

Installing a memory card

An optional memory card can be purchased separately and attached to the system board. To install the memory card:

1 Access the system board.

2 Unpack the memory card.

5 Dust cover · Additional printer setup

Page 20 of the Lexmark 210 user manual — Installing a memory card
Page 20 · click to enlarge
Page 20

3 Open the memory card connector latches.

Lexmark 210 — Installing a memory card diagram (page 20)
Fig. 16 · Installing a memory card

4 Align the notch on the memory card with the ridge on the connector.

Lexmark 210 — Installing a memory card diagram (page 20)
Fig. 17 · Installing a memory card

1 Notch · 2 Ridge · Additional printer setup

Page 21 of the Lexmark 210 user manual — Installing a flash memory or firmware card
Page 21 · click to enlarge
Page 21

5 Push the memory card straight into the connector until it snaps into place.

Lexmark 210 — Installing a flash memory or firmware card diagram (page 21)
Fig. 18 · Installing a flash memory or firmware card

6 Reattach the system board cover.

Installing a flash memory or firmware card

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.

1 Access the system board.

2 Unpack the card.

Additional printer setup

Page 22 of the Lexmark 210 user manual — Installing a flash memory or firmware card
Page 22 · click to enlarge
Page 22

3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.

Lexmark 210 — Installing a flash memory or firmware card diagram (page 22)
Fig. 19 · Installing a flash memory or firmware card

4 Push the card firmly into place.

Lexmark 210 — Installing a flash memory or firmware card diagram (page 22)
Fig. 20 · Installing a flash memory or firmware card
  • The entire length of the connector on the card must touch and be flush against the system board.
  • Be careful not to damage the connectors.

5 Reattach the system board cover.

1 Plastic pins · 2 Metal pins · Additional printer setup

Page 23 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 23 · click to enlarge
Page 23

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

1 Access the system board.

2 Unpack the ISP and plastic tee.

3 Locate the appropriate connector on the system board.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 23)
Fig. 21 · Installing an Internal Solutions Port

Additional printer setup

Page 24 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 24 · click to enlarge
Page 24

a Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer

hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 24)
Fig. 22 · Installing an Internal Solutions Port

b Remove the screws holding the printer hard disk in place.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 24)
Fig. 23 · Installing an Internal Solutions Port

Additional printer setup

Page 25 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 25 · click to enlarge
Page 25

c Remove the printer hard disk by pulling it upward to unseat the standoffs.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 25)
Fig. 24 · Installing an Internal Solutions Port

d Remove the thumbscrews that attach the printer hard disk mounting bracket to the printer hard disk, and

then remove the bracket. Set the printer hard disk aside.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 25)
Fig. 25 · Installing an Internal Solutions Port

4 Remove the metal cover from the ISP opening.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 25)
Fig. 26 · Installing an Internal Solutions Port

Additional printer setup

Page 26 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 26 · click to enlarge
Page 26

5 Align the posts of the plastic tee to the holes in the system board, and press downward until the tee snaps into place. Be sure each post of the tee has latched completely, and the tee is seated firmly on the system board.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 26)
Fig. 27 · Installing an Internal Solutions Port

6 Install the ISP on the plastic tee. Angle the ISP over the plastic tee, and approach the plastic tee so that any overhanging connectors will pass through the ISP opening in the system board cage.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 26)
Fig. 28 · Installing an Internal Solutions Port

Additional printer setup

Page 27 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 27 · click to enlarge
Page 27

7 Lower the ISP toward the plastic tee until the ISP is seated between the guides of the plastic tee.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 27)
Fig. 29 · Installing an Internal Solutions Port

8 Insert the long thumbscrew and turn it clockwise enough to hold the ISP in place, but do not tighten the thumbscrew at this time.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 27)
Fig. 30 · Installing an Internal Solutions Port

Additional printer setup

Page 28 of the Lexmark 210 user manual — Installing an Internal Solutions Port
Page 28 · click to enlarge
Page 28

9 Attach the two provided screws to secure the ISP mounting bracket to the system board cage.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 28)
Fig. 31 · Installing an Internal Solutions Port

10 Tighten the long thumbscrew.

11 Insert the plug of the ISP interface cable into the receptacle of the system board.

Lexmark 210 — Installing an Internal Solutions Port diagram (page 28)
Fig. 32 · Installing an Internal Solutions Port

12 Reattach the system board cover.

Additional printer setup

Page 29 of the Lexmark 210 user manual — Installing a printer hard disk
Page 29 · click to enlarge
Page 29

Installing a printer hard disk

The optional printer hard disk can be installed with or without a Lexmark Internal Solutions Port (ISP).

1 Access the system board.

2 Unpack the printer hard disk.

3 Locate the appropriate connector on the system board.

To install a printer hard disk onto the ISP:

a Using a flathead screwdriver to loosen the screws, remove the thumbscrews that attach the printer hard disk

mounting bracket to the printer hard disk, and then remove the bracket.

Additional printer setup

Page 30 of the Lexmark 210 user manual — Installing a printer hard disk
Page 30 · click to enlarge
Page 30

b Align the standoffs of the printer hard disk with the holes in the ISP, and then press downward on the printer

hard disk until the standoffs have seated into place.

Lexmark 210 — Installing a printer hard disk diagram (page 30)
Fig. 33 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Lexmark 210 — Installing a printer hard disk diagram (page 30)
Fig. 34 · Installing a printer hard disk

Additional printer setup

Page 31 of the Lexmark 210 user manual — Installing a printer hard disk
Page 31 · click to enlarge
Page 31

To install a printer hard disk directly on the system board:

a Align the standoffs of the printer hard disk with the holes in the system board, and then press downward on

the printer hard disk until the standoffs have seated into place.

Lexmark 210 — Installing a printer hard disk diagram (page 31)
Fig. 35 · Installing a printer hard disk

b Attach the two provided screws to secure the printer hard disk mounting bracket.

Lexmark 210 — Installing a printer hard disk diagram (page 31)
Fig. 36 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the system board.

Additional printer setup

Page 32 of the Lexmark 210 user manual — Reattaching the system board cover
Page 32 · click to enlarge
Page 32
Lexmark 210 — Reattaching the system board cover diagram (page 32)
Fig. 37 · Reattaching the system board cover

4 Reattach the system board cover.

Reattaching the system board cover

1 Align the eight keyholes with the screws to replace the cover.

Lexmark 210 — Reattaching the system board cover diagram (page 32)
Fig. 38 · Reattaching the system board cover

Additional printer setup

Page 33 of the Lexmark 210 user manual — Attaching cables
Page 33 · click to enlarge
Page 33

2 Slide the cover down, and then turn each screw clockwise to tighten.

Lexmark 210 — Attaching cables diagram (page 33)
Fig. 39 · Attaching cables

Attaching cables

Connect the printer to the computer using a USB cable or Ethernet cable.

Be sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port

Additional printer setup

Page 34 of the Lexmark 210 user manual — Attaching cables
Page 34 · click to enlarge
Page 34
Lexmark 210 — Attaching cables diagram (page 34)
Fig. 40 · Attaching cables

1 USB port · 2 Ethernet port · Additional printer setup

Page 35 of the Lexmark 210 user manual — Installing optional trays
Page 35 · click to enlarge
Page 35

Installing optional trays

The printer supports up to three optional input sources: an optional 550-sheet tray, an optional 2,000-sheet tray, and an optional 550-sheet specialty media drawer. Instructions for installing an optional input source are the same for each.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

1 Unpack the optional tray, and remove all packing material.

2 Place the tray in the location chosen for the printer.

Additional printer setup

Page 36 of the Lexmark 210 user manual — Installing optional trays
Page 36 · click to enlarge
Page 36
Lexmark 210 — Installing optional trays diagram (page 36)
Fig. 41 · Installing optional trays

1 Optional 550-sheet tray (or optional 550-sheet specialty media drawer)

2 Optional 550-sheet specialty media drawer (or optional 550-sheet tray)

3 Optional 2,000-sheet tray

3 Align the printer with the tray, and then lower the printer into place.

Lexmark 210 — Installing optional trays diagram (page 36)
Fig. 42 · Installing optional trays

Additional printer setup

Page 37 of the Lexmark 210 user manual — For Windows users
Page 37 · click to enlarge
Page 37

Verifying printer setup

Printing a menu settings page

Print a menu settings page to review the status of the supplies.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Reports appears, and then press

Menu Settings Page.

Printing Menu Settings Page appears. After the menu settings page prints, Ready appears.

Printing a network setup page

If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Reports appears, and then press

4 Press the down arrow button until

Network Setup Page appears, and then press

After the network setup page prints, Ready appears.

5 Check the first section on the network setup page, and confirm that Status is “Connected.”

If Status is “Not Connected,” the LAN drop may not be active, the network cable may be malfunctioning, or, if you have a wireless printer model, the wireless network may not be configured properly. Consult a system support person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software

A printer driver is software that lets the computer communicate with the printer. The printer software is typically installed during the initial printer setup. If you need to install the software after setup, follow these instructions:

For Windows users

1 Close all open software programs.

2 Insert the Software and Documentation CD.

3 From the main installation dialog, click Install.

4 Follow the instructions on the screen.

4 Press · to select · Additional printer setup

Page 38 of the Lexmark 210 user manual — For Macintosh users
Page 38 · click to enlarge
Page 38

For Macintosh users

1 Close all open software applications.

2 Insert the Software and Documentation CD.

3 From the Finder desktop, double-click the printer CD icon that automatically appears.

4 Double-click the Install icon.

5 Follow the instructions on the screen.

Using the World Wide Web

1 Go to the Lexmark Web site at www.lexmark.com.

2 From the Drivers & Downloads menu, click Driver Finder.

3 Select your printer, and then select your operating system.

4 Download the driver and install the printer software.

Updating available options in the printer driver

Once the printer software and any options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs.

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printer folder opens.

4 Select the printer.

5 Right-click the printer, and then select Properties.

6 Click the Install Options tab.

7 Under Available Options, add any installed hardware options.

8 Click Apply.

For Macintosh users

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax.

3 Select the printer, and then click Options & Supplies.

4 Click Driver, and then add any installed hardware options.

5 Click OK.

1 Click · Additional printer setup

Page 39 of the Lexmark 210 user manual — Setting up wireless printing
Page 39 · click to enlarge
Page 39

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications.

2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.

3 Select the printer, and then from the Printers menu, choose Show Info.

4 From the pop-up menu, choose Installable Options.

5 Add any installed hardware options, and then click Apply Changes.

Setting up wireless printing

Follow these instructions if your printer model is wireless.

Information you will need to set up the printer on a wireless network

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode will be either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to auto for infrastructure networks.

Some ad hoc networks will also require the auto setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are three basic options for Security Method: – WEP key

If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently in use on the network by selecting the Default WEP Transmit Key. or – WPA or WPA2 passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – No security

If your wireless network does not use any type of security, then you will not have any security information.

If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X username and password
  • Certificates

Additional printer setup

Page 40 of the Lexmark 210 user manual — Installing the printer on a wireless network (Windows)
Page 40 · click to enlarge
Page 40

Installing the printer on a wireless network (Windows)

Before you install the printer on a wireless network, make sure that:

  • Your wireless network is set up and working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

1 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on.

Lexmark 210 — Installing the printer on a wireless network (Windows) diagram (page 40)
Fig. 43 · Installing the printer on a wireless network (Window…
Lexmark 210 — Installing the printer on a wireless network (Windows) diagram (page 40)
Fig. 44 · Installing the printer on a wireless network (Window…
Lexmark 210 — Installing the printer on a wireless network (Windows) diagram (page 40)
Fig. 45 · Installing the printer on a wireless network (Window…

Make sure the printer and computer are fully on and ready.

Lexmark 210 — Installing the printer on a wireless network (Windows) diagram (page 40)
Fig. 46 · Installing the printer on a wireless network (Window…

Do not connect the USB cable until instructed to do so on the screen.

2 Insert the Software and Documentation CD.

Lexmark 210 — Installing the printer on a wireless network (Windows) diagram (page 40)
Fig. 47 · Installing the printer on a wireless network (Window…

3 Click Install Printer and Software.

4 Click Agree to agree to the License Agreement.

5 Click Suggested, and then click Next.

6 Click Wireless Network Attach.

Additional printer setup

Page 41 of the Lexmark 210 user manual — Enter the printer information
Page 41 · click to enlarge
Page 41

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

Lexmark 210 — Installing the printer on a wireless network (Macintosh) diagram (page 41)
Fig. 48 · Installing the printer on a wireless network (Macint…

8 Follow the on-screen instructions to complete the software installation.

9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Locate the printer MAC address on the sheet that shipped with the printer. Write the last six digits of the MAC address in the space provided below:

MAC address___ ___ ___ ___ ___ ___

2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the power on.

Enter the printer information

1 Access the AirPort options.

Additional printer setup

Page 42 of the Lexmark 210 user manual — In Mac OS X version 10.4 and earlier
Page 42 · click to enlarge
Page 42

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

2 From the Network pop-up menu, select print server xxxxxx, where the x’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open the Safari browser.

4 From the Bookmarks drop-down menu, select Show.

5 Under Collections, select Bonjour or Rendezvous, and then double-click the printer name.

6 From the main page of the Embedded Web Server, navigate to the page where the wireless settings information is stored.

Configure the printer for wireless access

1 Type the name of your network (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode if you are using a wireless router.

3 Select the type of security you use to protect your wireless network.

4 Enter the security information necessary for the printer to join your wireless network.

5 Click Submit.

6 Open the AirPort application on your computer:

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Network.

c Click AirPort.

In Mac OS X version 10.4 and earlier

a From the Finder desktop, click Go > Applications. b From the Applications folder, double-click Internet Connect.

c From the toolbar, click AirPort.

7 From the Network pop-up menu, select your wireless network.

Additional printer setup

Page 43 of the Lexmark 210 user manual — In Mac OS X version 10.5
Page 43 · click to enlarge
Page 43

Configure your computer to use the printer wirelessly

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a printer in the Print Center or Printer Setup Utility.

1 Install a PPD file on the computer: a Insert the Software and Documentation CD in the CD or DVD drive. b Double-click the installer package for the printer.

c From the Welcome screen, click Continue. d Click Continue again after viewing the Readme file. e Click Continue after viewing the license agreement, and then click Agree to accept the terms of the

agreement. f Select a Destination, and then click Continue. g From the Easy Install screen, click Install. h Type the user password, and then click OK.

All necessary software is installed on the computer. i Click Restart when installation is complete.

2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click IP. 5 Type in the IP address of your printer in the Address field. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Printer Setup Utility or Print Center. 4 From the Printer List, choose Add. 5 Click IP. 6 Type in the IP address of your printer in the Address field. 7 Click Add. b For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

Additional printer setup

Page 44 of the Lexmark 210 user manual — For Windows users
Page 44 · click to enlarge
Page 44

In Mac OS X version 10.4

1 From the Finder desktop, choose Go > Applications. 2 Double-click the Utilities folder. 3 Locate and double-click Print Center or Printer Setup Utility. 4 From the Printer List, choose Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.

Installing the printer on a wired network

Use the following instructions to install the printer on a wired network. These instructions apply to Ethernet and fiber optic network connections.

Before you install the printer on a wired network, make sure that:

  • You have completed the initial setup of the printer.
  • The printer is connected to your network with the appropriate type of cable.

For Windows users

1 Insert the Software and Documentation CD.

Wait for the Welcome screen to appear.

If the CD does not launch after a minute, then do the following:

, or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

2 Click Install Printer and Software.

3 Click Agree to agree to the License Agreement.

4 Select Suggested, and then click Next.

5 Select Wired Network Attach, and then click Next.

6 Select the printer manufacturer from the list.

7 Select the printer model from the list, and then click Next.

8 Select the printer from the list of printers discovered on the network, and then click Finish.

9 Follow the on-screen instructions to complete the installation.

a Click · Additional printer setup

Page 45 of the Lexmark 210 user manual — In Mac OS X version 10.5
Page 45 · click to enlarge
Page 45

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

2 Print the network setup page from the printer. For information on printing a network setup page, see “Printing a network setup page” on page 37.

3 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.

4 Install the drivers and add the printer. a Install a PPD file on the computer:

1 Insert the Software and Documentation CD in the CD or DVD drive. 2 Double-click the installer package for the printer. 3 From the Welcome screen, click Continue. 4 Click Continue again after viewing the Readme file. 5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement. 6 Select a Destination, and then click Continue. 7 From the Easy Install screen, click Install. 8 Type the user password, and then click OK. All the necessary software is installed on the computer. 9 Click Restart when installation is complete. b Add the printer:

  • For IP printing:

In Mac OS X version 10.5 or later

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax. 3 Click +. 4 Click IP. 5 Type in the IP address of your printer in the Address field. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Printer Setup Utility or Print Center. 4 From the Printer List, click Add. 5 Click IP. 6 Type in the IP address of your printer in the Address field. 7 Click Add. • For AppleTalk printing:

In Mac OS X version 10.5

1 From the Apple menu, choose System Preferences. 2 Click Print & Fax.

Additional printer setup

Page 46 of the Lexmark 210 user manual — For Windows users
Page 46 · click to enlarge
Page 46

3 Click +. 4 Click AppleTalk. 5 Select the printer from the list. 6 Click Add.

In Mac OS X version 10.4 and earlier

1 From the Finder desktop, choose Go > Applications. 2 Double-click Utilities. 3 Double-click Print Center or Printer Setup Utility. 4 From the Printer List, click Add. 5 Choose the Default Browser tab. 6 Click More Printers. 7 From the first pop-up menu, choose AppleTalk. 8 From the second pop-up menu, select Local AppleTalk zone. 9 Select the printer from the list. 10 Click Add.

Changing port settings after installing a new network Internal Solutions Port

When a new network Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated because the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address in order to print to it over the network.

  • If the printer has a static IP address that will stay the same, then you do not need to make any changes to the computer configurations.
  • If the computers are configured to print to the printer by a network name that will stay the same, instead of by IP address, then you do not need to make any changes to the computer configurations.
  • If you are adding a wireless ISP to a printer previously configured for a wired connection, then make sure the wired network is disconnected when you configure the printer to operate wirelessly. If the wired connection remains connected, then the wireless configuration will complete, but the wireless ISP will not be active. In the event that the printer was configured for a wireless ISP while still attached to a wired connection, disconnect the wired connection, turn the printer off, and then turn the printer back on again. This will enable the wireless ISP.
  • Only one network connection at a time is active. If you want to switch the connection type between wired and wireless, you must first turn the printer off, connect the cable (to switch to a wired connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on again.

For Windows users

1 Print a network setup page and make a note of the new IP address.

, or click Start and then click Run.

2 Click · Additional printer setup

Page 47 of the Lexmark 210 user manual — In Mac OS X version 10.4 and earlier
Page 47 · click to enlarge
Page 47

3 In the Start Search or Run box, type control printers.

4 Press Enter, or click OK.

The printer folder opens.

5 Locate the printer that has changed.

6 Right-click the printer.

7 Click Properties.

8 Click the Ports tab.

9 Locate the port in the list, and then select it.

10 Click Configure Port.

11 Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network setup page you printed in step 1.

12 Click OK, and then click Close.

For Macintosh users

1 Print a network setup page and make a note of the new IP address.

2 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you are configuring access for computers on a different subnet than the printer.

3 Add the printer• For IP printing:

In Mac OS X version 10.5 or later

a From the Apple menu, choose System Preferences. b Click Print & Fax.

c Click +. d Click IP. e Type in the IP address of your printer in the Address field.

f Click Add.

In Mac OS X version 10.4 and earlier

a From the Go menu, choose Applications. b Double-click Utilities.

c Double-click Printer Setup Utility or Print Center. d From the Printer List, click Add. e Click IP.

f Type in the IP address of your printer in the Address field. g Click Add. • For AppleTalk printing:

Additional printer setup

Page 48 of the Lexmark 210 user manual — Setting up serial printing
Page 48 · click to enlarge
Page 48

In Mac OS X version 10.5

a From the Apple menu, choose System Preferences. b Click Print & Fax.

c Click +. d Click AppleTalk. e Select the printer from the list.

f Click Add.

In Mac OS X version 10.4 and earlier

a From the Go menu, choose Applications. b Double-click Utilities.

c Double-click Print Center or Printer Setup Utility. d From the Printer List, click Add. e Choose the Default Browser tab.

f Click More Printers. g From the first pop-up menu, choose AppleTalk. h From the second pop-up menu, select Local AppleTalk zone.

i Select the printer from the list. j Click Add.

Setting up serial printing

In serial printing, data is transferred one bit at a time. Although serial printing is usually slower than parallel printing, it is the preferred option when there is a great deal of distance between the printer and computer or when an interface with a better transfer rate is not available.

After installing the serial port, you will need to configure the printer and the computer so they can communicate. Make sure you have connected the serial cable to the serial port on your printer.

1 Set the parameters in the printer: a From the printer control panel, navigate to the menu with port settings. b Locate the submenu with serial port settings.

c Make any necessary changes to the serial settings. d Save the new settings. e Print a menu settings page.

2 Install the printer driver: a Insert the Software and Documentation CD. It launches automatically.

If the CD does not launch automatically, then do the following:

, or click Start and then click Run. 2 In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

b Click Install Printer and Software.

c Click Agree to accept the Printer Software License Agreement. d Click Custom. e Make sure Select Components is selected, and then click Next.

1 Click · Additional printer setup

Page 49 of the Lexmark 210 user manual — Setting up serial printing
Page 49 · click to enlarge
Page 49

f Make sure Local is selected, and then click Next. g Select the manufacturer of the printer from the menu. h Select the printer model from the menu, and then click Add Printer.

i Click the + beside the printer model under Select Components. j Make sure the correct port is available under Select Components. This is the port where the serial cable attaches to the computer. If the correct port is not available, select the port under the Select Port menu, and then click Add Port. k Make any configuration changes necessary in the Add a New Port window. Click Add Port to finish adding

the port. l Make sure the box next to the selected printer model is checked. m Select any other optional software you want to install, and then click Next.

n Click Finish to complete the printer software installation.

3 Set the COM port parameters:

After the printer driver is installed, you must set the serial parameters in the communications (COM) port assigned to the printer driver.

The serial parameters in the COM port must match the serial parameters you set in the printer.

a Open the Device Manager.

, or click Start and then click Run. 2 In the Start Search or Run box, type devmgmt.msc. 3 Press Enter, or click OK. The Device Manager opens. b Click + to expand the list of available ports.

c Select the communications port where you attached the serial cable to your computer (example: COM1). d Click Properties. e On the Port Settings tab, set the serial parameters to the same serial parameters in the printer.

Look for the printer settings under the serial heading on the Menu Settings page you printed earlier. f Click OK, and then close all the windows. g Print a test page to verify printer installation. When a test page prints successfully, printer setup is complete.

1 Click · Additional printer setup

Page 50 of the Lexmark 210 user manual — Check your first draft for accuracy
Page 50 · click to enlarge
Page 50

Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see "Using Eco-Mode".

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 65.

Conserving supplies

There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:

Use both sides of the paper

If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper for a printed document by selecting 2-sided printing from the Print dialog or the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple-page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N-Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the Lexmark preview feature, which you can select from the Print dialog or the Lexmark Toolbar to see what the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Minimizing your printer's environmental impact

Page 51 of the Lexmark 210 user manual — Using Eco-Mode
Page 51 · click to enlarge
Page 51

Avoid paper jams

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 80.

Print in black and white

To print all text and graphics using only the black toner cartridge, set the printer to Black Only. For more information, see “Printing in black and white” on page 78.

Use Max Speed or Max Yield settings

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting. For more information, see “Using Max Speed and Max Yield” on page 79.

Saving energy

Using Eco-Mode

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Power Saver mode after one minute of inactivity.
  • When the printer enters Power Saver mode, the printer control panel display light is turned off.
  • Paper
  • Enable the automatic duplex feature (on printer models that support duplex).
  • Turn off print log features.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

Off Use factory default settings for all settings associated with Eco-Mode. This setting supports the performance specifications for your printer.

To select an Eco-Mode setting:

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Settings appears, and then press

4 Press the down arrow button until

General Settings appears, and then press

5 Press the down arrow button until

Eco-Mode appears, and then press

6 Press the left or right arrow button to scroll through the list of possible settings. Press

at the correct setting.

Submitting Selection appears.

Minimizing your printer's environmental impact

Choose To

Page 52 of the Lexmark 210 user manual — Using the Embedded Web Server
Page 52 · click to enlarge
Page 52

Reducing printer noise

Use Quiet Mode to reduce the printer noise.

Reduce printer noise.

  • Print jobs will process at one-half the normal processing speed.
  • Printer engine motors do not start until a job is ready to print. There will be a short delay before the first page is printed.
  • Fans run at reduced speed or are turned off.
  • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer. The fax is placed in standby mode.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer will ignore the Advance Start command.

Use factory default settings. This setting supports the performance specifications for your printer.

To select a Quiet Mode setting:

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Settings appears, and then press

4 Press the down arrow button until

General Settings appears, and then press

5 Press the down arrow button until

Quiet Mode appears, and then press

6 Press the left or right arrow button to scroll through the list of possible settings. Press

at the correct setting.

Submitting Selection appears.

Adjusting Power Saver

To save energy, you can decrease the number of minutes before the printer enters Power Saver mode.

Available settings range from 1–240 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings, and then click General Settings.

Minimizing your printer's environmental impact

Choose To · On (Text/Graphics) · Off (Image/Photo)

Page 53 of the Lexmark 210 user manual — Using the printer control panel
Page 53 · click to enlarge
Page 53

3 Click Timeouts.

4 In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters Power Saver mode.

5 Click Submit.

Using the printer control panel

1 Make sure the printer is on and Ready appears.

3 Press the arrow buttons until

Settings appears, and then press

4 Press the arrow buttons until

General Settings appears, and then press

5 Press the arrow buttons until

Timeouts appears, and then press

6 Press the arrow buttons until

Power Saver appears, and then press

7 Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver mode, and then press

Adjusting the brightness of the display

To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display.

Available settings range from 1–10. The factory default setting is 5.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings, and then click Utilities Menu.

3 In the LCD Brightness box, type in the brightness you want for your display.

4 Click Submit.

Using the printer control panel

1 Make sure the printer is on and Ready appears.

3 Press the arrow buttons until

Settings appears, and then press

4 Press the arrow buttons until

Utilities Menu appears, and then press

5 Press the arrow buttons until

LCD Brightness appears, and then press

6 Press the arrow buttons to select a setting, and then press

Minimizing your printer's environmental impact

2 Press · 2 Press

Page 54 of the Lexmark 210 user manual — Returning Lexmark cartridges for reuse or recycling
Page 54 · click to enlarge
Page 54

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products to Lexmark for recycling:

1 Visit our Web site at www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the pre-paid shipping label. You can also:

1 Visit our Web site at www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country from the list.

3 Follow the instructions on the computer screen.

Minimizing your printer's environmental impact

Page 55 of the Lexmark 210 user manual — Loading the paper tray
Page 55 · click to enlarge
Page 55

Loading paper and specialty media

This section explains how to load the standard tray (Tray 1), also known as the 550-sheet tray, an optional 550-sheet tray, an optional 2,000-sheet tray, a multipurpose tray, and an optional 550-sheet specialty media drawer. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.

Setting the paper size and type

To change the paper size and type settings:

1 Make sure that the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Paper Menu appears, and then press

4 Press the down arrow button until

Paper Size/Type appears, and then press

5 Press the down arrow button until the correct tray appears, and then press

6 Press the down arrow button until

appears next to the correct size, and then press

7 Press the left or right arrow button to scroll through the list of possible paper types. Press

at the correct paper type.

Submitting Selection appears. The printer returns to the Paper Size/Type.

three times to return to the Ready state.

Loading the paper tray

The printer has up to five input sources to select from: the standard tray (Tray 1), also known as the 550-sheet tray, an optional 550-sheet tray, an optional 2,000-sheet tray, a multipurpose tray, and an optional 550-sheet specialty media drawer. Load the paper or specialty media used for the majority of print jobs in Tray 1. Proper paper loading prevents jams and facilitates trouble-free printing.

Loading paper and specialty media

8 Press

Page 56 of the Lexmark 210 user manual — Loading paper and specialty media
Page 56 · click to enlarge
Page 56

Do not remove trays while a job prints or while Busy blinks on the printer control panel. Doing so may cause a jam.

1 Grasp the handle, and then pull the tray out. Remove the tray completely.

Lexmark 210 — Loading paper and specialty media diagram (page 56)
Fig. 49 · Loading paper and specialty media
Lexmark 210 — Loading paper and specialty media diagram (page 56)
Fig. 50 · Loading paper and specialty media

2 Squeeze the width guide tabs as shown, and then slide the guide to the correct position for the size of paper being loaded.

Lexmark 210 — Loading paper and specialty media diagram (page 56)
Fig. 51 · Loading paper and specialty media

Loading paper and specialty media

Page 57 of the Lexmark 210 user manual — Loading paper and specialty media
Page 57 · click to enlarge
Page 57
Lexmark 210 — Loading paper and specialty media diagram (page 57)
Fig. 52 · Loading paper and specialty media

3 Squeeze the length guide tabs together, and then slide the length guide to the correct position for the size of paper being loaded.

Lexmark 210 — Loading paper and specialty media diagram (page 57)
Fig. 53 · Loading paper and specialty media

4 Flex a stack of paper back and forth to loosen the sheets, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 210 — Loading paper and specialty media diagram (page 57)
Fig. 54 · Loading paper and specialty media

5 Load the paper stack with the recommended print side faceup. Load the stack toward the back of the tray as shown.

Loading paper and specialty media

Page 58 of the Lexmark 210 user manual — Loading the multipurpose tray
Page 58 · click to enlarge
Page 58

When loading preprinted letterhead for simplex printing, place the header toward the front of the tray.

Lexmark 210 — Loading the multipurpose tray diagram (page 58)
Fig. 55 · Loading the multipurpose tray

6 Align the tray, and then reinsert it.

Lexmark 210 — Loading the multipurpose tray diagram (page 58)
Fig. 56 · Loading the multipurpose tray

7 If a different type of paper was loaded than the type previously loaded in the tray, then change the paper type setting for the tray from the printer control panel. For more information, see “Setting the paper size and type” on page 55.

Loading the multipurpose tray

The multipurpose tray accommodates a variety of media types including envelopes. Media not kept in a tray can be loaded into the multipurpose tray.

Loading paper and specialty media

Page 59 of the Lexmark 210 user manual — Loading the multipurpose tray
Page 59 · click to enlarge
Page 59
Lexmark 210 — Loading the multipurpose tray diagram (page 59)
Fig. 57 · Loading the multipurpose tray

1 Stack height limiter

2 Tray release latch

3 Paper release lever

6 Width guide release tab

1 Press the tray release latch to the left, and then pull the multipurpose tray down.

Lexmark 210 — Loading the multipurpose tray diagram (page 59)
Fig. 58 · Loading the multipurpose tray

Loading paper and specialty media

4 Size indicators · 5 Width guide

Page 60 of the Lexmark 210 user manual — Loading the multipurpose tray
Page 60 · click to enlarge
Page 60

2 Gently pull the extension out until it is fully extended.

Lexmark 210 — Loading the multipurpose tray diagram (page 60)
Fig. 59 · Loading the multipurpose tray

3 Prepare a media stack for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Lexmark 210 — Loading the multipurpose tray diagram (page 60)
Fig. 60 · Loading the multipurpose tray
  • Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
Lexmark 210 — Loading the multipurpose tray diagram (page 60)
Fig. 61 · Loading the multipurpose tray

Loading paper and specialty media

Page 61 of the Lexmark 210 user manual — Unlinking trays
Page 61 · click to enlarge
Page 61

4 Load the media stack with the recommended print side facedown and the top edge entering the printer first.

Lexmark 210 — Linking and unlinking trays diagram (page 61)
Fig. 62 · Linking and unlinking trays

5 Load envelopes with the flap side up and the return address edge entering the printer first.

Lexmark 210 — Linking and unlinking trays diagram (page 61)
Fig. 63 · Linking and unlinking trays

6 Make sure the media is as far into the multipurpose tray as it will go with very gentle pushing. Media should lie flat and fit loosely in the multipurpose tray.

7 From the printer control panel, set the Paper Size and Paper Type, and then press

The multipurpose tray can be closed when not in use.

Linking and unlinking trays

Linking trays

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the Standard 550-sheet tray and the multipurpose tray. The Paper Size setting for the Standard 550-sheet tray and the multipurpose tray must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.

Unlinking trays

Unlinked trays have settings that are not the same as the settings of any other tray.

Loading paper and specialty media

Page 62 of the Lexmark 210 user manual — Linking and unlinking trays
Page 62 · click to enlarge
Page 62

To unlink a tray, change the following tray settings so that they do not match the settings of any other tray:

  • Paper Type (for example: Plain Paper, Letterhead, Custom Type <x>)

Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name. • Paper Size (for example: letter, A4, statement)

Load a different paper size to change the Paper Size setting for a tray automatically. Paper Size settings for the Standard 550-sheet tray and the multipurpose tray are not automatic; they must be set manually from the Paper Size menu.

  • Do not assign a Paper Type name that does not accurately describe the type of paper loaded in the tray. The temperature of the fuser varies according to the specified Paper Type. Paper may not be properly processed if an inaccurate Paper Type is selected.
  • If the media you have loaded is smaller than the Paper Size setting, then your text or graphics may not fit on the media.

Loading paper and specialty media

Page 63 of the Lexmark 210 user manual — Grain direction
Page 63 · click to enlarge
Page 63

Paper and specialty media guide

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer can automatically feed paper weights from 60 to 220 g/m2 (16 to 58 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2

(20 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 (24 lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60 to 135 g/m2 (16 to 36 lb bond) paper, grain long paper is recommended. For papers heavier than 135 g/m2, grain short is recommended.

Paper and specialty media guide

Page 64 of the Lexmark 210 user manual — Selecting preprinted forms and letterhead
Page 64 · click to enlarge
Page 64

Fiber content

Most high-quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm (±0.9 in.), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms.
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple-part forms or documents

Selecting paper

Using appropriate paper prevents jams and helps ensure trouble-free printing.

To help avoid jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same source; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 90 g/m 2 (16 to 24 lb) weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions.

Paper and specialty media guide

Page 65 of the Lexmark 210 user manual — Storing paper
Page 65 · click to enlarge
Page 65

Using recycled paper and other office papers

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket statement can be made that all recycled paper will feed well.

Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.

  • Low moisture content (4–5%)
  • Suitable smoothness (100–200 Sheffield units, or 140–350 Bendtsen units, European)
  • Note: Some much smoother papers (such as premium 24 lb laser papers, 50–90 Sheffield units) and much rougher papers (such as premium cotton papers, 200–300 Sheffield units) have been engineered to work very well in laser printers, despite surface texture. Before using these types of paper, consult your paper supplier.
  • Suitable sheet-to-sheet coefficient of friction (0.4–0.6)
  • Sufficient bending resistance in the direction of feed

Recycled paper, paper of lower weight (

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
  • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.

Paper and specialty media guide

Page 66 of the Lexmark 210 user manual — Supported paper sizes
Page 66 · click to enlarge
Page 66

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper input sources and the types of paper they support.

For more information, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications.

Supported paper sizes

Measurements apply to simplex (one-sided) printing only. For duplex (two-sided) printing, the minimum size is 139.7 x 210 mm (5.50 x 8.27 in.).

Lexmark 210 — Supported paper sizes diagram (page 66)
Fig. 64 · Supported paper sizes

A4 210 x 297 mm (8.27 x 11.7 in.)

A5 148 x 210 mm (5.83 x 8.27 in.)

A6 105 x 148 mm (4.13 x 5.83 in.)

JIS B5 182 x 257 mm (7.17 x 10.1 in.)

Letter 215.9 x 279.4 mm (8.5 x 11 in.)

Legal 215.9 x 355.6 mm (8.5 x 14 in.)

Executive 184.2 x 266.7 mm (7.25 x 10.5 in.)

Oficio (México) 215.9 x 340.4 mm (8.5 x 13.4 in.)

Folio 215.9 x 330.2 mm (8.5 x 13 in.)

Statement 139.7 x 215.9 mm (5.5 x 8.5 in.)

*This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software application. **Supported by C734 model printers only. ***Supported by C736 model printers only.

Paper and specialty media guide

Page 67 of the Lexmark 210 user manual — Supported paper types and weights
Page 67 · click to enlarge
Page 67

Paper size Dimensions Standard 550-sheet tray (Tray 1)

Optional 550-sheet specialty media drawer

148 x 210 mm to 215.9 x 355.6 mm (5.83 x 8.27 in. to 8.5 x 14 in.)

76.2 x 127 mm (3 x 5 in.) to 215.9 x 355.6 mm (8.5 x 14 in.)

76.2 x 127 mm (3 x 5 in.) to 215.9 x 914.4 mm (8.5 x 36 in.)**

76.2 x 127 mm (3 x 5 in.) to 215.9 x 1219.2 mm (8.5 x 48 in.)***

7 3/4 Envelope (Monarch)

98.4 x 190.5 mm (3.875 x 7.5 in.)

9 Envelope 98.4 x 226.1 mm (3.875 x 8.9 in.)

104.8 x 241.3 mm (4.12 x 9.5 in.)

DL Envelope 110 x 220 mm (4.33 x 8.66 in.)

C5 Envelope 162 x 229 mm (6.38 x 9.01 in.)

B5 Envelope 176 x 250 mm (6.93 x 9.84 in.)

Other Envelope* 85.7 x 165 mm to

215.9 x 355.6 mm (3.375 x 6.50 in. to 8.5 x 14 in.)

*This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software application. **Supported by C734 model printers only. ***Supported by C736 model printers only.

Supported paper types and weights

The printer engine supports 60–220 g/m2 (16–58 lb) paper weights.

Paper and specialty media guide

Show 5 more labels / short text on this page
Optional 550-sheet tray · Optional 2,000-sheet tray · Multipurpose tray · Universal · Com 10 Envelope
Page 68 of the Lexmark 210 user manual — Supported paper types and weights
Page 68 · click to enlarge
Page 68

Paper type Standard 550-sheet tray (Tray 1)

Optional 550-sheet tray Optional 2,000-sheet tray Multipurpose tray

Optional 550-sheet specialty media drawer

Envelopes X X X

* Do not use inkjet or 3M CG3710 transparencies.

Paper and specialty media guide

Show 5 more labels / short text on this page
Paper · Card stock · Transparencies* · Labels · Glossy paper
Page 69 of the Lexmark 210 user manual — Printing on letterhead
Page 69 · click to enlarge
Page 69

Printing

This chapter covers printing, printer reports, and job cancelation. The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see "Avoiding jams" and "Storing paper."

Printing a document

Printing a document

1 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper.

2 Send the print job:

For Windows users

a With a document open, click File ª Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.

For Macintosh users

a Customize the settings as needed in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop-up menus, adjust the settings as needed.

Printing specialty documents

Printing on letterhead

1 Load letterhead into a tray or drawer.

2 From the printer control panel, set the Paper Type to Letterhead. See “Setting the paper size and type” on page 55 for more information.

3 Do one of the following:

Printing

Page 70 of the Lexmark 210 user manual — Tips on using transparencies
Page 70 · click to enlarge
Page 70

For Windows users

a With a document open, click File ª Print. b Click Properties, Preferences, Options, or Setup.

c From the Form Source list box, select the source containing the letterhead. d From the Form Type list box, select Letterhead. e From the Form Size list box, select the letterhead size.

f Click OK, and then click Print.

For Macintosh users

a Customize the settings as needed in the Page Setup dialog.

1 With a document open, choose File ª Page Setup. 2 From the “Format for” pop-up menu, choose the printer that you want to use. 3 From the Paper Size pop-up menu, choose a paper size that matches the size of the letterhead paper, then create a custom size. b Customize the settings as needed in the Print dialog.

1 With a document open, click File ª Print. 2 From the Printer pop-up menu, choose the printer that you want to use. 3 From the third pop-up menu from the top, choose Quality & Media. 4 From the Paper type pop-up menu, choose a paper type. 5 From the Print Quality menu, choose a print quality other than Quick Print.

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to load the letterhead:

Source or process Print side Paper orientation

  • Standard 550-sheet tray
  • Optional 550-sheet tray
  • Optional 2,000-sheet tray
  • Optional 550-sheet specialty media drawer

Preprinted letterhead design is placed faceup.

The top edge of the sheet with the logo is placed at the front of the tray.

Duplex (two-sided) printing from trays

Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo is placed at the back of the tray.

Multipurpose tray (simplex printing)

Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo should enter the multipurpose tray first.

Multipurpose tray (duplex printing)

Preprinted letterhead design is placed faceup.

The top edge of the sheet with the logo should enter the multipurpose tray last.

Tips on using transparencies

Print samples on the transparencies being considered for use before buying large quantities.

Printing

Page 71 of the Lexmark 210 user manual — Tips on using labels
Page 71 · click to enlarge
Page 71

When printing on transparencies:

  • Feed transparencies from any tray or drawer, except the Optional 2,000-sheet tray.
  • Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure transparencies are able to withstand temperatures up to 170°C (338°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, fan the stack to prevent sheets from sticking together.
  • We recommend Lexmark part number 12A8240 for letter-size transparencies and Lexmark part number 12A8241 for A4-size transparencies.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

When printing on envelopes:

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the envelopes can withstand temperatures up to 190°C (374°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For the best performance, use envelopes made from 90 g/m 2 (24 lb bond) paper. Use up to 105 g/m 2 (28 lb bond) weight for envelopes as long as the cotton content is 25% or less. All-cotton envelopes must not exceed 90 g/m 2 (24 lb bond) weight.
  • Use only new envelopes.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

Print samples on the labels being considered for use before buying large quantities.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications.

Printing

Page 72 of the Lexmark 210 user manual — Holding jobs in the printer
Page 72 · click to enlarge
Page 72

When printing on labels:

  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 190°C (374°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25 psi (172 kPa) pressure

  • without delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non-oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single-ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

When printing on card stock:

  • Make sure the Paper Type is Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper-handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 190°C (374°F) without releasing hazardous emissions.
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing confidential and other held jobs

Holding jobs in the printer

When sending a job to the printer, you can specify in the Print Properties that you want the printer to hold the job in memory until you start the job from the printer control panel. All print jobs that can be initiated by the user at the printer are called held jobs.

Printing

Page 73 of the Lexmark 210 user manual — For Windows Users
Page 73 · click to enlarge
Page 73

Confidential When you send a Confidential print job to the printer, you must create a PIN in Print Properties. The PIN must be four digits using the numbers 0–9. The job is held in printer memory until you enter the PIN from the printer control panel and choose to print or delete the job.

Verify When you send a Verify print job, the printer prints one copy and holds the remaining copies in printer memory. Verify lets you examine the first copy to see if it is satisfactory before printing the remaining copies. Once all copies are printed, the job is automatically deleted from printer memory.

Reserve When you send a Reserve print job, the printer does not print the job immediately. It stores the job in memory so you can print the job later. The job is held in memory until you delete it from the Held Jobs menu.

Repeat When you send a Repeat print job, the printer prints all requested copies of the job and stores the job in memory so you can print additional copies later. You can print additional copies as long as the job remains stored in memory.

Printing confidential and other held jobs

Confidential and Verify print jobs are automatically deleted from memory after they print. Repeat and Reserve jobs continue to be held in the printer until you choose to delete them.

For Windows Users

1 With a document open, click File ª Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Other Options, and then click Print and Hold.

4 Select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.

5 Click OK or Print, and then go to the printer to release the job.

6 From the printer control panel, press the down arrow button until

Held jobs appears, and then press

7 Press the down arrow button until

appears next to your user name, and then press

8 Press the down arrow button until

appears next to the job type or job name, and then press

If you selected a job name, proceed to step 11 on page 73.

9 After selecting your job type, use the keypad to enter your PIN.

If you enter an invalid PIN, the Invalid PIN screen appears.

  • To re-enter the PIN, make sure

. • To cancel the PIN, press the down arrow button until

Try again appears, and then press

Cancel appears, and then press

10 Press the down arrow button until

appears next to the job you want to print, and then press

11 Press the down arrow button until

appears next to the number of copies you want to print, and then press

Job type Description · Printing

Page 74 of the Lexmark 210 user manual — For Macintosh users
Page 74 · click to enlarge
Page 74

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options, Copies & Pages, or General pop-up menu, choose Job Routing.

3 Select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN.

4 Click Print, and then go to the printer to release the job.

5 From the printer control panel, press the down arrow button until

Held jobs appears, and then press

6 Press the down arrow button until

appears next to your user name, and then press

7 Press the down arrow button until

appears next to the job type or job name, and then press

If you selected a job name, proceed to step 10 on page 74.

8 After selecting your job type, use the keypad to enter your PIN.

If you enter an invalid PIN, the Invalid PIN screen appears.

  • To re-enter the PIN, make sure

. • To cancel the PIN, press the down arrow button until

Try again appears, and then press

Cancel appears, and then press

9 Press the down arrow button until

appears next to the job you want to print, and then press

10 Press the down arrow button until

appears next to the number of copies you want to print, and then press

Printing

Page 75 of the Lexmark 210 user manual — Printing from a flash drive
Page 75 · click to enlarge
Page 75

Printing from a flash drive

A flash drive port is located on the printer control panel. Insert a flash drive to print supported file types. Supported file types include: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, .xps, and .dcx.

Many flash drives are tested and approved for use with the printer. For more information, visit the Lexmark Web site at www.lexmark.com.

  • High-speed flash drives must support the full-speed USB standard. Flash drives supporting only USB low-speed capabilities are not supported.
  • Flash drives must support the FAT ( File Allocation Tables ) system. Flash drives formatted with NTFS ( New Technology File System ) or any other file system are not supported.
  • Before printing an encrypted .pdf file, enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

To print from a flash drive:

1 Make sure the printer is on and Ready appears.

2 Insert a flash drive into the flash drive port.

Lexmark 210 — Printing from a flash drive diagram (page 75)
Fig. 65 · Printing from a flash drive
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores it.
  • If you insert the flash drive while the printer is printing other jobs, then Printer Busy appears. After the other jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

3 Press the down arrow button until

appears next to the document you want to print, and then press

to initiate the print job.

to print one copy, or enter the number of copies using the keypad, and then press

If you leave the flash drive in the printer after leaving the initial USB menu screen, you can still print .pdf's from the flash drive as held jobs.

4 Press · Printing

Page 76 of the Lexmark 210 user manual — Printing a font sample list
Page 76 · click to enlarge
Page 76

Printing photos from a PictBridge-enabled digital camera

You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos.

1 Insert one end of the USB cable into the camera.

2 Insert the other end of the USB cable into the USB port on the front of the printer.

Lexmark 210 — Printing photos from a PictBridge-enabled digital camera diagram (page 76)
Fig. 66 · Printing photos from a PictBridge-enabled digital ca…
  • Make sure the PictBridge-enabled digital camera is set to the correct USB mode. See the camera documentation for more information.
  • If the PictBridge connection is successful, then a confirmation message appears on the printer display.

3 Follow the instructions on the camera to select and print photos.

Printing information pages

Printing a font sample list

To print samples of the fonts currently available for your printer:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Reports appears, and then press

4 Press the down arrow button until

Print Fonts appears, and then press

5 Press the down arrow button until

appears next to PCL Fonts or PostScript Fonts, and then press

After the font sample list prints, Ready appears.

Printing

Page 77 of the Lexmark 210 user manual — Canceling a print job from the computer
Page 77 · click to enlarge
Page 77

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press

3 Press the down arrow button until

Reports appears, and then press

4 Press the down arrow button until

Print Directory appears, and then press

After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

1 Turn the printer off.

and the right arrow button while turning the printer on.

3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.

4 Press the down arrow button until

Prt Quality Pgs appears, and then press

The print quality test pages print.

5 Press the down arrow button until

Exit Config Menu appears, and then press

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Canceling a print job

There are several methods for canceling a print job. The following sections explain how to cancel a print job from the printer control panel, or from a computer depending on the operating system.

Canceling a print job from the printer control panel

If the job is formatting or already printing, and Cancel a job appears on the first line of the display:

1 Press the arrow buttons until

Cancel appears.

A list of jobs appears.

2 Press the arrow buttons until

appears next to the job you want to cancel, and then press

Canceling <file name> appears.

. The Stopped screen appears. Press the arrow buttons until

Cancel a job appears, and then press

Canceling a print job from the computer

To cancel a print job, do one of the following:

2 Hold down · Printing

Page 78 of the Lexmark 210 user manual — Printing in black and white
Page 78 · click to enlarge
Page 78

For Windows users

, or click Start and then click Run.

2 In the Start Search or Run box, type control printers.

3 Press Enter, or click OK.

The printer folder opens.

4 Double-click the printer icon.

5 Select the job to cancel.

6 From the keyboard, press Delete.

From the Windows taskbar:

When you send a job to print, a small printer icon appears in the right corner of the taskbar.

1 Double-click the printer icon.

A list of print jobs appears in the printer window.

2 Select a job to cancel.

3 From the keyboard, press Delete.

For Macintosh users

In Mac OS X version 10.5 or later:

1 From the Apple menu, choose System Preferences.

2 Click Print & Fax, and then double-click the printer icon.

3 From the printer window, select the job to cancel.

4 From the icon bar at the top of the window, click the Delete icon.

In Mac OS X version 10.4 and earlier:

1 From the Go menu, choose Applications.

2 Double-click Utilities, and then double-click Print Center or Printer Setup Utility.

3 Double-click the printer icon.

4 From the printer window, select the job to cancel.

5 From the icon bar at the top of the window, click the Delete icon.

Printing in black and white

To print all text and graphics using only the black toner cartridge, set the printer to Black Only.

1 From the printer control panel, press

2 Press the down arrow button until

Settings appears, and then press

3 Press the down arrow button until

Quality Menu appears, and then press

1 Click · Printing

Page 79 of the Lexmark 210 user manual — Using Max Speed and Max Yield
Page 79 · click to enlarge
Page 79

4 Press the down arrow button until

Print Mode appears, and then press

5 Press the down arrow button until

Black Only appears, and then press

Submitting selection appears.

Using Max Speed and Max Yield

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting.

  • Max Speed —Prints in color mode unless black only is selected by the driver. Prints in black only mode if the black only driver setting is selected.
  • Max Yield —Switches from black to color mode based on the color content found on each page. Frequent color mode switching can result in slower printing if the content of pages is mixed.

To specify the setting:

1 Open a Web browser.

2 In the address bar, type the network printer or print server IP address, and then press Enter.

3 Click Configuration.

4 Click Print Settings.

5 Click Setup Menu.

6 From the Printer Usage list, select Max Speed or Max Yield.

7 Click Submit.

Printing

Page 80 of the Lexmark 210 user manual — Understanding jam messages
Page 80 · click to enlarge
Page 80

Clearing jams

By carefully selecting papers and specialty media and loading it properly, you should be able to avoid most jams. For more information, see “Avoiding jams” on page 80. If jams do occur, follow the steps outlined in this chapter.

To resolve the jam messages, you must clear the entire paper path, and press

to clear the message and resume printing. The printer prints a new copy of the page that jammed if Jam Recovery is set to On or Auto; however, the Auto setting does not guarantee the page will print.

Avoiding jams

The following hints can help you avoid jams:

  • Use only recommended paper or specialty media.
  • For more information, see the Card Stock & Label Guide available on the Lexmark Web site at <a href="http://www.lexmark.com/publications" rel="nofollow noopener" target="_blank">www.lexmark.com/publications</a> .
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Do not load wrinkled, creased, damp, or curled paper.
  • Flex, fan, and straighten paper before loading it.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Store the paper in an appropriate environment.
  • Do not remove trays while the printer is printing. Wait for Load tray <x> or Ready to appear before removing a tray.
  • Do not load the multipurpose tray while the printer is printing. Load the tray prior to printing, or wait for Load Multipurpose tray with <x> to appear.
  • Push all trays in firmly after loading paper.
  • Make sure the guides in the trays are properly positioned.
  • Make sure all paper sizes and paper types are set correctly in the printer control panel menu.
  • Make sure all printer cables are attached correctly. For more information, see the setup documentation.

Understanding jam messages

The following table lists the jam messages that can occur.

200.yy Paper jam, check [area name]. Leave paper in bin. “200 paper jams” on page 81 “200 or 201 paper jam” on page 82 “201 paper jam” on page 83 200.yy Paper jam, [x] pages jammed. Leave paper in bin.

Message See · Clearing jams

Page 81 of the Lexmark 210 user manual — 200 paper jams
Page 81 · click to enlarge
Page 81

201.yy Paper jam, check [area name]. Leave paper in bin. “200 paper jams” on page 81

“200 or 201 paper jam” on page 82

“201 paper jam” on page 83 201.yy Paper jam, [x] pages jammed. Leave paper in bin.

202.yy Paper jam, check [area name]. Leave paper in bin. “202 paper jam” on page 84

202.yy Paper jam, [x] pages jammed. Leave paper in bin.

203.yy Paper jam, check [area name]. Leave paper in bin. “203 paper jam” on page 86

203.yy Paper jam, [x] pages jammed. Leave paper in bin.

230.yy Paper jam, [area name]. Leave paper in bin. “230 paper jam” on page 87

230.yy Paper jam, [x] pages jammed. Leave paper in bin.

241.yy Paper jam, check [area name]. Leave paper in bin. “240 paper jam” on page 88

241.yy Paper jam, [x] pages jammed. Leave paper in bin.

24n.yy Paper jam, check [area name]. Leave paper in bin. “240 paper jam” on page 88

24n.yy Paper jam, [x] pages jammed. Leave paper in bin.

250.yy Paper jam, check [area name]. Leave paper in bin. “250 paper jam” on page 90

250.yy Paper jam, [x] pages jammed. Leave paper in bin.

200 paper jams

If paper jams behind the inner door, but not under the photoconductor units, 200.xx Paper jam appears.

1 Open the front door.

2 Pull the jammed paper up and out to remove it from behind the toner cartridge area.

Lexmark 210 — 200 paper jams diagram (page 81)
Fig. 67 · 200 paper jams

3 Close the front door.

Message See · 4 Press · Clearing jams

Page 82 of the Lexmark 210 user manual — 200 or 201 paper jam
Page 82 · click to enlarge
Page 82

200 or 201 paper jam

If paper jams under the photoconductor units, 200.xx Paper jam or 201.xx Paper jam may appear.

1 Open the front door.

2 Pull the paper forward if it is lodged under the photoconductor units.

Lexmark 210 — 200 or 201 paper jam diagram (page 82)
Fig. 68 · 200 or 201 paper jam

3 Remove each photoconductor unit, and place it on a flat surface.

Lexmark 210 — 200 or 201 paper jam diagram (page 82)
Fig. 69 · 200 or 201 paper jam

4 Remove the jammed paper, and then replace each photoconductor unit.

5 Close the front door.

from the printer control panel.

6 Press · Clearing jams

Page 83 of the Lexmark 210 user manual — 201 paper jam
Page 83 · click to enlarge
Page 83

201 paper jam

If paper is jammed under the fuser or the top cover, 201.xx Paper jam appears.

1 Open the front door, and then open the top cover.

2 Determine where the jam is located: a If paper is visible under the fuser, grasp it on each side and pull it forward.

Lexmark 210 — 201 paper jam diagram (page 83)
Fig. 70 · 201 paper jam

b If paper is not visible, then you will need to remove the fuser unit.

Lexmark 210 — 201 paper jam diagram (page 83)
Fig. 71 · 201 paper jam

2 Lift the handholds on each side of the fuser unit, and then pull forward to remove it.

Lexmark 210 — 201 paper jam diagram (page 83)
Fig. 72 · 201 paper jam

3 Remove the jammed paper.

Clearing jams

Page 84 of the Lexmark 210 user manual — Paper jam under the fuser unit
Page 84 · click to enlarge
Page 84

4 Align the fuser unit using the handholds on each side, and place it back into the printer.

Lexmark 210 — 202 paper jam diagram (page 84)
Fig. 73 · 202 paper jam

5 Turn the screws to the right to securely fasten the fuser unit.

Lexmark 210 — 202 paper jam diagram (page 84)
Fig. 74 · 202 paper jam

c Close the top cover, and then close the front door. d Press

202 paper jam

If paper is jammed both under the fuser unit and in the slot behind the fuser unit, then 202.xx Paper jam appears.

If the paper is visible in the standard exit bin, then grasp the paper and pull it away from the bin.

Lexmark 210 — 202 paper jam diagram (page 84)
Fig. 75 · 202 paper jam

Paper jam under the fuser unit

Clearing jams

Page 85 of the Lexmark 210 user manual — Paper jam behind the fuser unit
Page 85 · click to enlarge
Page 85

1 Open the front door, and then open the top cover.

2 Grasp the paper on each side and pull it forward.

3 Close the top cover, and then close the front door.

Paper jam behind the fuser unit

1 Open the front door, and then open the top cover.

2 If the paper is jammed behind the fuser, then you will need to remove the fuser unit.

b Lift the handholds on each side of the fuser unit, and then pull forward to remove it.

c Place the fuser unit on a flat surface.

4 Press · Clearing jams

Page 86 of the Lexmark 210 user manual — 203 paper jam
Page 86 · click to enlarge
Page 86

3 Pull the paper gently out of the printer or up toward the standard exit bin to remove it.

4 Reinstall the fuser unit. a Align the fuser unit using the handholds on each side, and place it back into the printer.

b Turn the screws to the right to fasten the fuser unit securely.

5 Close the top cover, and then close the front door.

203 paper jam

If paper is jammed under the rollers near the fuser, or in the standard exit bin 203.xx Paper jam appears.

1 Grasp paper that is visible in the standard exit bin and pull it away from the bin.

Lexmark 210 — 203 paper jam diagram (page 86)
Fig. 76 · 203 paper jam

2 Open the front door, and then open the top cover.

6 Press · Clearing jams

Page 87 of the Lexmark 210 user manual — 230 paper jam
Page 87 · click to enlarge
Page 87

3 Grasp the paper on each side, and pull it out gently.

Lexmark 210 — 230 paper jam diagram (page 87)
Fig. 77 · 230 paper jam

4 Close the top cover, and then close the front door.

230 paper jam

If paper is jammed between the front door and Tray 1, 230.xx Paper jam appears.

1 Remove Tray 1.

2 Open the front door.

3 Pull straight up to remove the jammed paper.

Lexmark 210 — 230 paper jam diagram (page 87)
Fig. 78 · 230 paper jam

4 Pull out on the release tabs to allow the front door to split.

Lexmark 210 — 230 paper jam diagram (page 87)
Fig. 79 · 230 paper jam

5 Pull straight out to remove any jammed paper.

5 Press · Clearing jams

Page 88 of the Lexmark 210 user manual — Paper jammed in Tray 1
Page 88 · click to enlarge
Page 88

6 Close the front door.

7 Reinsert Tray 1.

240 paper jam

If paper is jammed in Tray 1, 241.xx Paper jam appears. If paper is jammed in any of the optional trays, 24n.xx Paper jam appears.

Paper jammed in Tray 1

1 Open Tray 1, and then pull the jammed pages straight up and out.

Lexmark 210 — Paper jammed in Tray 1 diagram (page 88)
Fig. 80 · Paper jammed in Tray 1

2 Close Tray 1.

8 Press · 3 Press · Clearing jams

Page 89 of the Lexmark 210 user manual — Paper jammed in one of the optional trays
Page 89 · click to enlarge
Page 89

Paper jammed in front of Tray 1

1 Open Tray 1, and then pull the jammed pages up and out.

Lexmark 210 — Paper jammed in front of Tray 1 diagram (page 89)
Fig. 81 · Paper jammed in front of Tray 1

2 Close Tray 1.

Paper jammed in one of the optional trays

If the jammed pages are located in one of the optional trays, follow the appropriate steps below to remove the pages.

1 Open the specified optional tray, and pull the jammed pages out as illustrated.

Lexmark 210 — Paper jammed in one of the optional trays diagram (page 89)
Fig. 82 · Paper jammed in one of the optional trays

3 Press · Clearing jams

Page 90 of the Lexmark 210 user manual — 250 paper jam
Page 90 · click to enlarge
Page 90

2 Close the specified optional tray.

250 paper jam

If paper is jammed in the multipurpose tray, 250.xx Paper jam appears.

1 Press the paper release lever, and then remove the jammed pages from the multipurpose tray.

Lexmark 210 — 250 paper jam diagram (page 90)
Fig. 83 · 250 paper jam

2 Load new paper into the multipurpose tray.

3 Press · 3 Press · Clearing jams

Page 91 of the Lexmark 210 user manual — Understanding printer menus
Page 91 · click to enlarge
Page 91

Understanding printer menus

Menus list

A number of menus are available to make it easy for you to change printer settings. This diagram shows the items available under each menu.

Supplies Paper Menu Reports Settings

Replace Supply Cyan Cartridge

Default Source Paper Size/Type

Menu Settings Page Device Statistics

General Settings Setup Menu

Magenta Cartridge Yellow Cartridge Black Cartridge Cyan Photoconductor

Configure MP Substitute Size Paper Texture Paper Weight

Network Setup Page Network Setup Page

Finishing Menu Quality Menu Utilities Menu XPS Menu

Wireless Setup Page1

Yellow Photoconductor Black Photoconductor Waste Toner Box

Custom Types Universal Setup

PostScript Menu PCL Emul Menu HTML Menu

Print Fonts Print Directory Asset Report

PictBridge Menu Flash Drive Menu

Confidential Print Disk Wiping

Color Quality Print Quality

Parallel Serial

Media Guide Print Defects Menu Map

Information Guide Connection Guide Moving Guide Supplies Guide

1Only appears on wireless models.

2Depending on the printer setup, this menu item appears as Standard Network, Wireless Network, or Network .

Show 19 more labels / short text on this page
Profiles List · Magenta Photoconductor · Paper Loading · Netware Setup Page · PDF Menu · Fuser · Image Menu · Transfer Module · Security Network/Ports Help · Miscellaneous Security Setting · Active NIC · Print All · Standard Network2 · Standard USB · Security Audit Log · Printing Guide · Set Date/Time · SMTP Setup · Understanding printer menus
Page 92 of the Lexmark 210 user manual — Supplies menu
Page 92 · click to enlarge
Page 92

Supplies menu

Provides the option to reset the supply counter for the photoconductor just replaced, or for all photoconductors

All Cyan Photoconductor Magenta Photoconductor Yellow Photoconductor Black Photoconductor

Select the photoconductor, and then select Yes or No:

  • Select Yes to reset the supply counter.
  • Select No to exit.

Cyan, Magenta, Yellow, or Black Cartridge

Shows the status of the toner cartridges

Low Invalid Replace Missing or Defective OK Uncalibrated Unsupported

Cyan, Magenta, Yellow, or Black Photoconductor

Shows the status of the cyan, yellow, and magenta photoconductors

Life Warning Replace Missing OK

Shows the status of the black photoconductor

Life Warning Replace Missing OK

Shows the status of the waste toner box

Near Full Replace Missing OK

Shows the status of the fuser

Life Warning Replace Missing OK

Shows the status of the transfer module

Life Warning Replace Missing OK

Show 7 more labels / short text on this page
Menu item Description · Replace Supply · Black Photoconductor · Waste Toner Box · Fuser · Transfer module · Understanding printer menus
Page 93 of the Lexmark 210 user manual — Paper Size/Type menu
Page 93 · click to enlarge
Page 93

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray Multipurpose tray

  • From the Paper menu, Configure Multipurpose tray must be set to Cassette for Multipurpose tray to appear as a menu setting.
  • Tray 1 (standard tray) is the factory default setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the job prints using the linked tray.

Paper Size/Type menu

Specifies the paper size loaded in each tray

A4 A5 A6 JIS B5 Legal Letter Executive Oficio (México) Folio Statement Universal

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • For trays with automatic size sensing, only the size detected by the hardware appears.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the job prints using the linked tray.
Show 5 more labels / short text on this page
Menu item Description · Default Source · Menu item Description · Tray <x> Size · Understanding printer menus
Page 94 of the Lexmark 210 user manual — Paper menu
Page 94 · click to enlarge
Page 94

Specifies the type of paper loaded in each tray

Plain Paper Card Stock Transparency Glossy Heavy Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough Paper Recycled Custom Type

  • Plain Paper is the factory default setting for Tray 1. Custom Type <x> is the factory default setting for all other trays.
  • If available, a user-defined name will appear instead of Custom Type <x>.
  • Use this menu item to configure automatic tray linking.

Specifies the paper size loaded in the multipurpose tray

A4 A5 A6 Executive Oficio (México) Folio JIS B5 Legal Letter Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • From the Paper menu, Configure Multipurpose Tray must be set to Cassette for Multipurpose Tray to appear as a menu setting.
  • Letter is the US factory default setting. A4 is the international factory default setting.
Show 4 more labels / short text on this page
Menu item Description · Tray <x> Type · Multipurpose Tray Size · Understanding printer menus
Page 95 of the Lexmark 210 user manual — Paper menu
Page 95 · click to enlarge
Page 95

Specifies the type of paper loaded in the multipurpose tray

Plain Paper Card Stock Transparency Glossy Heavy Glossy Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough Paper Recycled Custom Type

  • From the Paper menu, Configure Multipurpose Tray must be set to Cassette for Multipurpose Tray to appear as a menu setting.
  • Plain paper is the factory default setting.

Specifies the size of the paper being manually loaded

A4 A5 JIS B5 Letter Legal Executive Folio Statement Universal

Specifies the type of paper being manually loaded

Paper Card Stock Transparencies Glossy paper Heavy Glossy Labels Light Paper Heavy Paper Rough Paper

Show 5 more labels / short text on this page
Menu item Description · Multipurpose Tray Type · Manual Paper Size · Manual Paper Type · Understanding printer menus
Page 96 of the Lexmark 210 user manual — Substitute Size menu
Page 96 · click to enlarge
Page 96

Specifies the size of the envelope being manually loaded

7 3/4 Envelope 9 Envelope 10 Envelope C5 Envelope B5 Envelope DL Envelope Other Envelope

Specifies the type of envelope being manually loaded

Envelope Rough Envelope Custom Type

Configure MP menu

Determines when the printer selects paper from the multipurpose feeder

  • Cassette is the factory default setting.
  • The Cassette setting configures the multipurpose feeder as an automatic paper source.
  • When Manual is selected, the multipurpose feeder can be used only for manual feed print jobs.

Substitute Size menu

Substitutes a specified paper size if the requested paper size is not available

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • The Off setting indicates no size substitutions are allowed.
  • Setting a substitution lets the job print without a Change Paper message appearing.
Show 9 more labels / short text on this page
Menu item Description · Manual Envelope Size · Manual Envelope Type · Menu item Description · Configure MP · Cassette Manual · Menu item Description · Substitute Size · Understanding printer menus
Page 97 of the Lexmark 210 user manual — Paper Texture menu
Page 97 · click to enlarge
Page 97

Paper Texture menu

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the card stock loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative texture of the transparencies loaded in a specific tray

Specifies the relative texture of the recycled paper loaded in a specific tray

Specifies the relative texture of the Glossy paper loaded in a specific tray

Specifies the relative texture of the labels loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the envelopes loaded in a specific tray

Specifies the relative texture of the envelopes loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Show 22 more labels / short text on this page
Menu item Description · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Glossy Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Smooth Normal Rough · Letterhead Texture · Smooth Normal Rough · Understanding printer menus
Page 98 of the Lexmark 210 user manual — Paper Weight menu
Page 98 · click to enlarge
Page 98

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the custom paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Paper Weight menu

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the card stock loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative weight of the transparencies loaded in a specific tray

Show 21 more labels / short text on this page
Menu item Description · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough Texture · Smooth Normal Rough · Custom <x> Texture · Smooth Normal Rough · Menu item Description · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Understanding printer menus
Page 99 of the Lexmark 210 user manual — Paper Weight menu
Page 99 · click to enlarge
Page 99

Specifies the relative weight of the recycled paper loaded in a specific tray

Specifies the relative weight of the Glossy paper loaded in a specific tray

Specifies the relative weight of the labels loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the envelopes loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the paper loaded in a specific tray

Specifies the relative weight of the custom paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.
Show 20 more labels / short text on this page
Menu item Description · Recycled Weight · Light Normal Heavy · Glossy Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Custom <x> Weight · Light Normal Heavy · Understanding printer menus
Page 100 of the Lexmark 210 user manual — Paper Loading menu
Page 100 · click to enlarge
Page 100

Paper Loading menu

Determines whether 2-sided printing occurs for all jobs that specify Recycled as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Glossy as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Letterhead as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Preprinted as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Colored as the paper type

Determines whether 2-sided printing occurs for all jobs that specify Custom as the paper type

  • Off is the factory default setting.
  • Custom <x> Loading is available only if the custom type is supported.
  • Duplex sets the printer default to 2-sided printing for every print job unless 1-sided printing is selected from Print Properties.
  • If Duplex is selected, then all print jobs are sent through the duplex unit including 1-sided jobs.
Show 14 more labels / short text on this page
Menu item Description · Recycled Loading · Duplex Off · Glossy Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Custom <x> Loading · Duplex Off · Understanding printer menus
Page 101 of the Lexmark 210 user manual — Universal Setup menu
Page 101 · click to enlarge
Page 101

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type <x> name or a user-defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional

Paper Card Stock Glossy Heavy Glossy Light Paper Heavy Paper Rough Paper Recycled Transparency Labels Envelope Rough Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose tray in order to print from that source.

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose tray in order to print from that source.

Universal Setup menu

These menu items are used to specify the height and width of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Identifies the units of measure

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.

Sets the portrait width

3–8.5 inches 76–216 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.
Show 8 more labels / short text on this page
Menu item Description · Custom Type <x> · Recycled · Menu item Description · Units of Measure · Inches Millimeters · Portrait Width · Understanding printer menus
Page 102 of the Lexmark 210 user manual — Reports menu
Page 102 · click to enlarge
Page 102

Sets the portrait height

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments.
  • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments.

Specifies the feed direction

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray.

Reports menu

Reports menu

Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information

Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages

Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

  • This menu item appears only for network printers or printers connected to print servers.
  • The page prints when this item is selected.

Network <x> Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

  • This selection is available when more than one network option is installed.
  • This menu item appears only for network printers or printers connected to print servers.
  • The page prints when this item is selected.
Show 5 more labels / short text on this page
Menu item Description · Portrait Height · Feed Direction · Menu item Description · Understanding printer menus
Page 103 of the Lexmark 210 user manual — Standard Network or Network <x> menus
Page 103 · click to enlarge
Page 103

Wireless Setup Page Prints a report containing information about the wireless network settings, such as TCP/IP address information

  • This menu item appears only for printers with an optional wireless print server installed.
  • The page prints when this item is selected.

Profiles List Prints a list of profiles stored in the printer

NetWare Setup Page Prints a report containing NetWare-specific information about the network settings

  • This menu item appears only for printers with an internal print server installed.
  • The page prints when this item is selected.

Prints a report of all the fonts available for the printer language currently set in the printer

PCL Fonts PostScript Fonts

Print Directory Prints a list of all the resources stored on an optional flash memory card or printer hard disk

  • Job Buffer Size must be set to 100%.
  • The optional flash memory or printer hard disk must be installed correctly and working properly.
  • The page prints when this item is selected.

Asset Report Prints a report containing each piece of printer asset information, such as the serial number and model name.

Network/Ports menu

Active NIC menu

Auto

  • Auto is the factory default setting.
  • This menu item appears only if an optional network card is installed.

Standard Network or Network <x> menus

Show 5 more labels / short text on this page
Menu item Description · Print Fonts · Menu item Description · Active NIC · Understanding printer menus
Page 104 of the Lexmark 210 user manual — Network/Ports menu
Page 104 · click to enlarge
Page 104

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the network input buffer

Auto 3K to

  • Auto is the factory default setting.
  • The value can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 9 more labels / short text on this page
Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Understanding printer menus
Page 105 of the Lexmark 210 user manual — Network Reports menu
Page 105 · click to enlarge
Page 105

Temporarily stores jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.

  • Off is the factory default setting.
  • The On value buffers jobs on the printer hard disk. This menu selection appears only when a formatted disk is installed and is not defective.
  • The Auto setting buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

For descriptions and settings of the network setup menus, see the following:

Reports or Network Reports Network Card TCP/IP IPv6 AppleTalk NetWare LexLink

  • “Network Reports menu” on page 105
  • “Network Card menu” on page 106
  • “TCP/IP menu” on page 106
  • “IPv6 menu” on page 107
  • “Wireless menu” on page 108
  • “AppleTalk menu” on page 108
  • “NetWare menu” on page 109
  • “LexLink menu” on page 110

Reports or Network Reports Network Card TCP/IP IPv6 Wireless AppleTalk NetWare LexLink

Network Reports menu

This menu is available from the Network/Ports menu:

Show 8 more labels / short text on this page
Menu item Description · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto · Std Network Setup · Net <x> Setup · Understanding printer menus
Page 106 of the Lexmark 210 user manual — TCP/IP menu
Page 106 · click to enlarge
Page 106

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª Reports or Network Reports

Print Setup Page Print NetWare Setup Page

Prints a report containing information about the current network setup

  • The Setup Page contains information about the network printer settings, such as the TCP/IP address.
  • The NetWare Setup Page menu item appears only on models that support NetWare and shows information about NetWare settings.

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª Network Card

Lets you view the connection status of the Network Card

View Card Speed Lets you view the speed of a currently active network card

Lets you view the network addresses

UAA LAA

Job Timeout 0-225 seconds

Sets the amount of time in seconds that a network print job can take before it is canceled

  • 90 seconds is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value of 1–9 is selected, then the setting is saved as 10.

Banner Page Off On

Allows the printer to print a banner page.

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.

This menu is available from the Network/Ports menu:

Show 6 more labels / short text on this page
Menu item Description · Menu item Description · View Card Status · Connected Disconnected · Network Address · Understanding printer menus
Page 107 of the Lexmark 210 user manual — IPv6 menu
Page 107 · click to enlarge
Page 107

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª TCP/IP

View Hostname Lets you view the current TCP/IP hostname

IP Address Lets you view or change the current TCP/IP Address

Netmask Lets you view or change the current TCP/IP Netmask

Gateway Lets you view or change the current TCP/IP Gateway

Specifies the DHCP address and parameter assignment setting

Specifies the RARP address assignment setting

Specifies the BOOTP address assignment setting

Specifies the Zero Configuration Networking setting

Enables the built-in FTP server, which allows you to send files to the printer using the File Transfer Protocol.

Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.

WINS Server Address Lets you view or change the current WINS Server Address

DNS Server Address Lets you view or change the current DNS Server Address

IPv6 menu

Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.

This menu is available from the Network/Ports menu:

Show 17 more labels / short text on this page
Menu item Description · Activate · Activates TCP/IP · On Off · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Understanding printer menus
Page 108 of the Lexmark 210 user manual — AppleTalk menu
Page 108 · click to enlarge
Page 108

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª IPv6

Enables IPv6 in the printer

Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router

View Hostname View Address

Lets you view the current setting

Enables DHCPv6 in the printer

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

This menu is available from the Network/Ports menu:

Network/Ports ª Network <x> ª Net <x> Setup ª Wireless

Specifies the network mode

  • Infrastructure mode lets the printer access a network using an access point.
  • Ad hoc is the factory default setting. Ad hoc mode configures the printer for wireless networking directly between it and a computer.

Specifies the wireless standard for the wireless network

802.11n 802.11b/g 802.11b/g/n

Lets you select an available network for the printer to use

View Signal Quality Lets you view the quality of the wireless connection

View Security Mode Lets you view the encryption method for the wireless connection. “Disabled” indicates that the wireless network is not encrypted.

AppleTalk menu

This menu is available from the Network/Ports menu:

Show 14 more labels / short text on this page
Menu item Description · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off · Menu item Description · Network Mode · Infrastructure Ad hoc · Compatibility · Choose Network · Understanding printer menus
Page 109 of the Lexmark 210 user manual — NetWare menu
Page 109 · click to enlarge
Page 109

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª AppleTalk

View Name Shows the assigned AppleTalk name

View Address Shows the assigned AppleTalk address

Provides a list of AppleTalk zones available on the network

NetWare menu

This menu is available from the Network/Ports menu:

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª NetWare

View Login Name Lets you view the assigned NetWare login name

Print Mode Lets you view the assigned NetWare print mode

Network Number Lets you view the assigned NetWare network number

Enables the Ethernet frame type setting

Ethernet 802.2 Ethernet 802.3 Ethernet Type II Ethernet SNAP

Reduces network traffic by allowing the transfer and acknowledgement of multiple data packets to and from the NetWare server

Specifies the NSQ/GSQ Mode setting

Show 15 more labels / short text on this page
Menu item Description · Activate · Activates AppleTalk support · On Off · Set Zone · Menu item Description · Activate · Activates NetWare support · Yes No · Select SAP Frames · Packet Burst · Yes No · NSQ/GSQ Mode · Yes No · Understanding printer menus
Page 110 of the Lexmark 210 user manual — Standard USB and USB <x> menus
Page 110 · click to enlarge
Page 110

LexLink menu

This menu is available from the Network/Ports menu:

Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª LexLink menu

View Nickname Lets you view the assigned LexLink nickname

Standard USB and USB <x> menus

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if the PS Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch setting is Off.

Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if the PCL Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch setting is Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 12 more labels / short text on this page
Menu item Description · Activate · Activates LexLink support · On Off · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Understanding printer menus
Page 111 of the Lexmark 210 user manual — LexLink menu
Page 111 · click to enlarge
Page 111

Sets the size of the USB input buffer

Disabled Auto 3k to

  • Auto is the factory default setting.
  • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The USB buffer size value can be changed in 1k increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Temporarily stores jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • The On setting buffers jobs on the printer hard disk.
  • The Auto setting buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

ENA Address Sets the network address information for an external print server that is attached to the printer using a USB cable

ENA Netmask Sets the netmask information for an external print server that is attached to the printer using a USB cable

ENA Gateway Sets the gateway information for an external print server that is attached to the printer using a USB cable

Show 7 more labels / short text on this page
Menu item Description · USB Buffer · Job Buffering · On Off Auto · Mac Binary PS · On Off Auto · Understanding printer menus
Page 112 of the Lexmark 210 user manual — Parallel <x> menu
Page 112 · click to enlarge
Page 112

Parallel <x> menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the parallel input buffer

Disabled Auto 3k to

  • Auto is the factory default setting.
  • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The parallel buffer size setting can be changed in 1k increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 9 more labels / short text on this page
Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Parallel Buffer · Understanding printer menus
Page 113 of the Lexmark 210 user manual — Parallel <x> menu
Page 113 · click to enlarge
Page 113

Temporarily stores jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • The Off setting does not buffer print jobs to the printer hard disk.
  • The On setting buffers jobs on the printer hard disk.
  • The Auto setting buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Enables bidirectional communication through the parallel port

  • On is the factory default setting.
  • The Off setting disables parallel port negotiation.

Specifies the parallel port protocol

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • The Standard setting tries to resolve parallel port communication problems.

Determines whether or not the printer honors printer hardware initialization requests from the computer

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determines whether or not the parallel port data is sampled on the leading or trailing edge of strobe

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

Sets the network address information for an external print server that is attached to the printer using a USB cable

...

Show 15 more labels / short text on this page
Menu item Description · Job Buffering · Off On Auto · Advanced Status · On Off · Parallel Protocol · Standard Fastbytes · Honor Init · On Off · Parallel Mode 2 · On Off · Mac Binary PS · On Off Auto · ENA Address · Understanding printer menus
Page 114 of the Lexmark 210 user manual — Serial <x> menu
Page 114 · click to enlarge
Page 114

Sets the netmask information for an external print server that is attached to the printer using a USB cable

...

Sets the gateway information for an external print server that is attached to the printer using a USB cable

...

Serial <x> menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • When the On setting is used, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When the Off setting is used, the printer does not perform NPA processing.
  • When the Auto setting is used, the printer examines data, determines the format, and then processes it appropriately.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.
Show 11 more labels / short text on this page
Menu item Description · ENA Netmask · ENA gateway · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Understanding printer menus
Page 115 of the Lexmark 210 user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 115 · click to enlarge
Page 115

Sets the size of the serial input buffer

Disabled Auto 3k to

  • Auto is the factory default setting.
  • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1k increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Temporarily stores jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • The Off setting does not buffer print jobs to the hard disk.
  • The On setting buffers jobs on the printer hard disk.
  • The Auto setting buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Selects the hardware and software handshaking settings for the serial port

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.

Determines whether or not the printer communicates availability to the computer

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.
Show 8 more labels / short text on this page
Menu item Description · Serial Buffer · Job Buffering · Off On Auto · Serial Protocol · Robust XON · On Off · Understanding printer menus
Page 116 of the Lexmark 210 user manual — SMTP Setup menu
Page 116 · click to enlarge
Page 116

Specifies the rate at which data can be received through the serial port

1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specifies the number of data bits that are sent in each transmission frame

Sets the parity for serial input and output data frames

Even Odd None Ignore

Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used by most serial cables.

  • Off is the factory default setting.
  • The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Select On to prevent stray characters from printing.

SMTP Setup menu

Use the following menu to configure the SMTP server.

Specifies SMTP server port information

Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port

5–30 Specifies the amount of time in seconds before the server stops trying to send the e-mail

Reply Address Specifies a reply address of up to 128 characters in e-mail sent by the printer

Show 10 more labels / short text on this page
Menu item Description · Baud · Data Bits · Parity · Honor DSR · On Off · Menu item Description · Primary SMTP Gateway · SMTP Timeout · Understanding printer menus
Page 117 of the Lexmark 210 user manual — Miscellaneous menu
Page 117 · click to enlarge
Page 117

Sets the printer to use SSL for increased security when connecting to the SMTP server

  • Disabled is the factory default setting for Use SSL.
  • When the Negotiate setting is used, your SMTP server determines if SSL will be used.

Specifies the type of user authentication required

No authentication required Login/Plain CRAM-MD5 Digest-MD5 NTLM Kerberos 5

Specifies what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials in order to send e- mail.

None Use Device SMTP Credentials

Device Userid Device Password

  • None is the factory default setting for Device-Initiated E-mail.
  • Device Userid and Device Password are used to log in to the SMTP server when "Use Device SMTP Credentials" is selected.

Security menu

Miscellaneous menu

Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out

Login failures Failure time frame Lockout time Login timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1–50. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1–60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 0–60 minutes. 5 minutes is the factory default setting.
  • “Login timeout” specifies how long the printer remains idle on the Home screen before automatically logging the user off. Settings range from 1–900 minutes. 300 minutes is the factory default setting.
Show 10 more labels / short text on this page
Menu item Description · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device-Initiated E-mail · Kerberos 5 Realm · NTLM Domain · Menu item Description · Panel Logins · Understanding printer menus
Page 118 of the Lexmark 210 user manual — Confidential Print menu
Page 118 · click to enlarge
Page 118

Limits the number and time frames of failed login attempts from a computer before all remote users are locked out

Login failures Failure time frame Lockout time Login timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1–50. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1–60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long a user is locked out after exceeding the login failures limit. Settings range from 0–60 minutes. 5 minutes is the factory default setting.
  • “Login timeout” specifies how long the remote interface remains idle before automatically logging the user off. Settings range from 1–900 minutes. 300 minutes is the factory default setting.

Confidential Print menu

Limits the number of times an invalid PIN can be entered

  • Off is the default setting.
  • This menu item appears only if a printer hard disk is installed.
  • Once a limit is reached, the jobs for that user name and that PIN are deleted.

Limits the amount of time a confidential job stays in the printer before it is deleted

Off 1 hour 4 hours 24 hours 1 week

  • Off is the default setting.
  • If the Job Expiration setting is changed while confidential jobs reside on the printer RAM or printer hard disk, the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, all confidential jobs held in printer RAM are deleted.
Show 7 more labels / short text on this page
Menu item Description · Remote Logins · Menu item Description · Max Invalid PIN · Off 2–10 · Job Expiration · Understanding printer menus
Page 119 of the Lexmark 210 user manual — Disk Wiping menu
Page 119 · click to enlarge
Page 119

Disk Wiping menu

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Automatic Wiping marks all disk space used by a previous job and does not permit the file system to reuse this space until it has been sanitized. Only Automatic Wiping enables users to activate disk wiping without having to take the printer offline for an extended amount of time.

  • This menu item appears only if a formatted, non-defective printer hard disk is installed.
  • Off is the default setting.
  • Due to the large amount of resources required for Automatic Wiping, activating this option may decrease printer performance, especially if the printer requires hard disk space faster than it can be wiped and returned to service.

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.

Start now Do not start now

Manual Wiping overwrites all disk space that has been used to hold data from a print job that has been processed (i.e. printed). This type of wipe does not erase any information related to an unprocessed print job.

  • This menu item appears only if a formatted, non-defective printer hard disk is installed.
  • "Do not start now" is the default setting.
  • If the Disk Wiping access control is activated, then a user must successfully authenticate and have the required authorization in order to initiate the disk wipe.

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.

Single pass Multiple pass

  • This menu item appears only if a formatted, non-defective printer hard disk is installed.
  • Single pass is the default setting.
  • Highly confidential information should be wiped using the Multiple pass method only .
Show 6 more labels / short text on this page
Menu item Description · Automatic Wiping · Off On · Manual Wiping · Automatic Method · Understanding printer menus
Page 120 of the Lexmark 210 user manual — Security Audit Log menu
Page 120 · click to enlarge
Page 120

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs. Both manual and scheduled wiping allow the file system to reuse marked disk space without first having to wipe it.

Single pass Multiple pass

  • This menu item appears only if a formatted, non-defective printer hard disk is installed.
  • Single pass is the default setting.
  • Highly confidential information should be wiped using the Multiple Pass method only .

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.

Single pass Multiple pass

Both manual and scheduled wiping allow the file system to reuse marked disk space without first having to wipe it.

  • This menu item appears only if a formatted, non-defective printer hard disk is installed.
  • Single pass is the default setting.
  • Highly confidential information should be wiped using the Multiple Pass method only .
  • Scheduled wipes are initiated without displaying a user warning or confirmation message.

Security Audit Log menu

Export Log Enables an authorized user to export the security log

  • To export the log from the printer control panel, a flash drive must be attached to the printer.
  • From the Embedded Web Server, the log can be downloaded to a computer.

Specifies whether audit logs are deleted

Delete now Do not delete

Specifies whether and how the audit logs are created

Enable Audit Enable Remote Syslog Remote Syslog Facility Severity of events to log

Show 7 more labels / short text on this page
Menu item Description · Manual Method · Scheduled Method · Menu item Description · Delete Log · Configure Log · Understanding printer menus
Page 121 of the Lexmark 210 user manual — General Settings menu
Page 121 · click to enlarge
Page 121

Set Date/Time menu

View Date/Time Lets you view the current date and time settings for the printer

Enables Network Time Protocol, which synchronizes the clocks of devices on a network

Settings menu

General Settings menu

Sets the language of the text appearing on the display

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Show 11 more labels / short text on this page
Menu item Description · Set Date/Time · <input date/time> · Time Zone · Observe DST · On Off · Enable NTP · On Off · Menu item Description · Display Language · Understanding printer menus
Page 122 of the Lexmark 210 user manual — Set Date/Time menu
Page 122 · click to enlarge
Page 122

Minimizes the use of energy, paper, or specialty media

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • The Energy setting minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.

Reduces the amount of noise produced by the printer

Off (Image/Photo) On (Text/Graphics)

  • Off is the factory default setting. This setting supports the performance specifications for your printer.
  • On configures the printer to produce as little noise as possible. This setting is best suited for printing text and line graphics.
  • For optimal printing of color-rich documents, set Quiet Mode to Off.
  • Selecting Photo from the driver may disable Quiet Mode and provide better print quality and full speed printing.

Instructs the printer to run the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the Country select screen, the default becomes No.
  • The initial setting is determined by your Country selection in the initial setup wizard.
  • Changing this setting also changes the Units of Measurement setting in the Universal Setup menu and the default for each input source in the Paper Size/Type menu.
Show 8 more labels / short text on this page
Menu item Description · Eco-Mode · Quiet Mode · Run Initial Setup · Yes No · Paper Sizes · US Metric · Understanding printer menus
Page 123 of the Lexmark 210 user manual — Set Date/Time menu
Page 123 · click to enlarge
Page 123

Sets an alarm to sound when the printer requires operator intervention

Alarm Control Cartridge Alarm

Available selections for each alarm type are:

  • Single is the factory default setting for Alarm Control. Single sounds three quick beeps.
  • Off is the factory default setting for Cartridge Alarm. Off means no alarm will sound.
  • Continuous repeats three beeps every 10 seconds.

Sets the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue

  • 30 seconds is the factory default setting.
  • This menu item appears only when a hard disk is installed.

Sets the amount of time the printer waits after a job is printed before it goes into a reduced power state

  • 30 minutes is the factory default setting.
  • Lower settings conserve more energy, but may require longer warm-up times.
  • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time.

Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs.
Show 13 more labels / short text on this page
Menu item Description · Alarms · Off Single Continuous · Timeouts · Job Hold Timeout · Timeouts · Power Saver · Timeouts · Screen Timeout · Timeouts · Print Timeout · Disabled 1–255 · Understanding printer menus
Page 124 of the Lexmark 210 user manual — Set Date/Time menu
Page 124 · click to enlarge
Page 124

Sets the amount of time in seconds the printer waits for additional data before canceling a print job

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.

Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period

Specifies whether the printer reprints jammed pages

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Returns the printer settings to the factory default settings

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user-defined settings.
  • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.

Displays information pertaining to the selected Custom Home Messages on the printer control panel display

None IP Address Hostname Contact Name Location Date/Time Zero Configuration Name Custom Text 1

Show 16 more labels / short text on this page
Menu item Description · Timeouts · Wait Timeout · Disabled 15–6553515 · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · Auto · Print Recovery · Page Protect · Off On · Factory Defaults · Custom Home Message · Understanding printer menus
Page 125 of the Lexmark 210 user manual — Setup menu
Page 125 · click to enlarge
Page 125

Setup menu

Sets the default printer language

PCL Emulation PS Emulation

  • PCL emulation uses a PCL interpreter for processing print jobs. PostScript emulation uses a PS interpreter for processing print jobs.
  • PCL is the factory default printer language.
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Specifies that print jobs be removed from the print queue if they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information and/or options are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu appears only if a non-Read Only printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.

Sets the logical and physical printable area

  • Normal is the factory default setting. When attempting to print data in the non-printable area defined by the Normal setting, the printer clips the image at the boundary.
  • The Whole Page setting allows the image to be moved into the non-printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary.
  • The Whole Page setting only affects pages printed using a PCL 5e interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreter.

Sets the printer for a faster print speed or a higher toner yield.

Max Yield Max Speed

Sets the printer to print text and graphics using only the black toner cartridge.

Show 10 more labels / short text on this page
Menu item Description · Printer Language · Job Waiting · On Off · Print Area · Normal Whole Page · Printer Usage · Black Only Mode · Off On · Understanding printer menus
Page 126 of the Lexmark 210 user manual — Setup menu
Page 126 · click to enlarge
Page 126

Sets the storage location for downloads

  • RAM is the factory default setting.
  • Storing downloads in flash memory or on a printer hard disk places them in permanent storage. Downloads remain in flash memory or on the printer hard disk even when the printer is turned off.
  • Storing downloads in RAM is temporary.
  • This menu appears only if a flash and/or disk option is installed.

Specifies whether the printer stores statistical information about the most recent print jobs on the hard disk

  • Off is the factory default setting. Off means the printer does not store job statistics.
  • The statistics include a record of print errors, the print time, the job size in bytes, the requested paper size and type, the total number of printed pages, and the total number of copies requested.
  • Job Accounting is available only when a printer hard disk is installed and working properly. It should not be Read/Write or Write protected. Job Buffer Size should not be set to 100%.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to reset. The menu selection is updated.

Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available

  • Off is the factory default setting. Off sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • The On setting retains the downloads during language changes and printer resets. If the printer runs out of memory, 38 Memory Full appears, and downloads are not deleted.

Specifies the order in which held and confidential jobs are printed when Print All is selected

Alphabetically Newest First Oldest First

  • Alphabetically is the factory default setting.
  • Print jobs always appear in alphabetical order on the printer control panel.
Show 9 more labels / short text on this page
Menu item Description · Download Target · RAM Flash Disk · Job Accounting · On Off · Resource Save · On Off · Print All Order · Understanding printer menus
Page 127 of the Lexmark 210 user manual — Finishing menu
Page 127 · click to enlarge
Page 127

Finishing menu

Specifies whether duplex (2-sided) printing is set as the default for all print jobs

2 sided 1 sided

  • 1 sided is the factory default setting.
  • To set 2-sided printing from the software program: for Windows users, click File ª Print , and then click Properties , Preferences , Options , or Setup ; for Macintosh users, choose File > Print , and then adjust the settings from the print dialog and pop-up menus.

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge specifies that binding be placed on the left edge of portrait pages and the top edge of landscape pages.
  • Short Edge specifies that binding be placed on the top edge of portrait pages and the left edge of landscape pages.

1–999 Specifies a default number of copies for each print job

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

Off (1,1,1,2,2,2) On (1,2,1,2,1,2)

  • Off is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.
  • Both settings print the entire job the number of times specified by the Copies menu setting.

Specifies whether blank separator sheets are inserted

None Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.
Show 8 more labels / short text on this page
Menu item Description · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Understanding printer menus
Page 128 of the Lexmark 210 user manual — Quality menu
Page 128 · click to enlarge
Page 128

Specifies the paper source for separator sheets

Tray Multipurpose Tray

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Multipurpose Tray to appear as a menu setting.

Specifies that multiple-page images be printed on one side of a sheet of paper.

Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specifies the positioning of multiple-page images when using N-up (pages-sides)

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of images and whether the images are in portrait or landscape orientation.

Specifies the orientation of a multiple-page sheet

Auto Long Edge Short Edge

  • Auto is the factory default setting. The printer chooses between portrait and landscape.
  • Long Edge uses landscape.
  • Short Edge uses portrait.

Prints a border around each page image when using N-up (pages-sides)

Quality menu

Specifies whether images are printed in monochrome grayscale or in color

Show 11 more labels / short text on this page
Menu item Description · Separator Source · N-up (pages-side) · N-up Ordering · Orientation · N-up Border · None Solid · Menu item Description · Print Mode · Color Black Only · Understanding printer menus
Page 129 of the Lexmark 210 user manual — Quality menu
Page 129 · click to enlarge
Page 129

Adjusts the color output on the printed page

  • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page.
  • Off turns off color correction.
  • Manual allows customization of the color tables using the settings available from the Manual Color menu.
  • Due to the differences in additive and subtractive colors, certain colors that appear on computer monitors are impossible to duplicate on the printed page.

Specifies the printed output resolution

1200 dpi 4800 CQ

  • 4800 CQ is the factory default setting.
  • 1200 dpi provides the highest resolution output, and increases gloss.

1–5 Lightens or darkens the printed output

  • 4 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
  • If Print Mode is set to Black Only, a setting of 5 increases toner density and darkness to all print jobs.
  • If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.

Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts

  • To set Enhance Fine Lines from the software program, with a document open, click File ª Print , and then click Properties , Preferences , Options , or Setup .
  • To set Enhance Fine Lines using the Embedded Web Server, type the network printer IP address in a browser window.

Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

  • Off is the factory default setting.
  • On overrides Toner Darkness settings.

Adjusts brightness in color outputs

  • 0 is the factory default setting.
  • -6 is the maximum decrease. 6 is the maximum increase.
  • This does not affect files where CMYK color specifications are being used.
Show 11 more labels / short text on this page
Menu item Description · Color Correction · Auto Off Manual · Print Resolution · Toner Darkness · Enhance Fine Lines · On Off · Color Saver · On Off · RGB Brightness · Understanding printer menus
Page 130 of the Lexmark 210 user manual — Quality menu
Page 130 · click to enlarge
Page 130

0–5 Adjusts contrast in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are being used.

0–5 Adjusts saturation in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are being used.

Adjusts color in printed output by increasing or decreasing the amount of toner being used for each color

-5–5 Reset Defaults 0

Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer

sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

  • Selecting any setting prints the sample.
  • Color samples consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed. These pages can be used to help decide which combinations to use to get the desired printed output.
  • From a browser window, type the IP address of the printer to access a complete list of color sample pages from the Embedded Web Server.
Show 10 more labels / short text on this page
Menu item Description · RGB Contrast · RGB Saturation · Color Balance · Cyan · -5–5 Magenta · -5–5 Yellow · -5–5 Black · Color Samples · Understanding printer menus
Page 131 of the Lexmark 210 user manual — Quality menu
Page 131 · click to enlarge
Page 131

Customizes the RGB color conversions

Vivid sRGB Display Display—True Black sRGB Vivid Off RGB Text

  • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor.
  • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivid applies a color table that increases saturation. This is preferred for business graphics and text.
  • Vivid applies a color conversion table that produces brighter, more saturated colors.
  • Display—True Black applies a color conversion table that uses only black toner for neutral gray colors.
  • Off turns off color conversion.

Vivid sRGB Display Display—True Black sRGB Vivid Off RGB Graphics

Vivid sRGB Display Display—True Black sRGB Vivid Off

Customizes the CMYK color conversions

US CMYK Euro CMYK Vivid CMYK Off CMYK Text

  • US CMYK is the US factory default setting. US CMYK applies a color conversion table that tries to produce output that matches SWOP color output.
  • Euro CMYK is the international factory default setting. Euro CMYK applies a color conversion table that tries to produce output that matches EuroScale color output.
  • Vivid CMYK increases color saturation for the US CMYK color conversion table.
  • Off turns off color conversion.

US CMYK Euro CMYK Vivid CMYK Off CMYK Graphics

US CMYK Euro CMYK Vivid CMYK Off

Color Adjust Initiates a recalibration of color conversion tables and allows the printer to make adjustments for color variations in output

  • Calibrating starts when the menu is selected. Calibrating appears on the display until the process is finished.
  • Color variations in output sometimes result from changeable conditions such as room temperature and humidity. Color adjustments are made on printer algorithms. Color alignment is also recalibrated in this process.
Show 6 more labels / short text on this page
Menu item Description · Manual Color · RGB Image · Manual Color · CMYK Image · Understanding printer menus
Page 132 of the Lexmark 210 user manual — Utilities menu
Page 132 · click to enlarge
Page 132

Utilities menu

Removes confidential and held jobs from the printer hard disk

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, jobs on flash drives, and other types of held jobs are not affected.
  • Selecting Not Restored removes all Print and Hold jobs that were not restored from the disk.

Formats the flash memory. Flash memory refers to the memory added by installing a flash memory option card in the printer.

  • A flash memory option card must be installed in the printer and operating properly for this menu item to be available. The flash memory option card must not be Read/Write or Write protected.
  • Selecting Yes deletes all data stored in flash memory.
  • No cancels the format request.

Delete Downloads on Disk

Removes downloads from the printer hard disk, including all held Jobs, buffered jobs, and parked jobs. Job accounting information is not affected.

Delete Now Do Not Delete

Prints a list of all stored job statistics or deletes the information from the printer hard disk

  • A printer hard disk must be installed in the printer and operating properly for this menu item to be available.
  • Selecting Print prints a list of statistics.
  • Clear deletes all job statistics stored on the printer hard disk.
  • The Clear selection will not appear if Job Accounting is set to MarkTrack TM using NPA.

Assists in isolating the source of a print job problem

  • When Activate is selected, all data sent to the printer is printed in hexadecimal and character representation and control codes are not executed.
  • To exit or deactivate Hex Trace, turn the printer off or reset the printer.

Provides an estimate of the percentage coverage of black on a page. The estimate is printed on a separate page at the end of each print job.

Show 11 more labels / short text on this page
Menu item Description · Remove Held Jobs · Format Flash · Yes No · Job Acct Stat · Print Clear · Hex Trace · Activate · Coverage Estimator · Off On · Understanding printer menus
Page 133 of the Lexmark 210 user manual — PostScript menu
Page 133 · click to enlarge
Page 133

1–10 Adjusts the contrast lighting of the display

  • 5 is the factory default setting.
  • A higher setting makes the display appear lighter.
  • A lower setting makes the display appear darker.

1–10 Adjusts the brightness of the backlight on the display

  • 5 is the factory default setting.
  • A higher setting makes the display appear lighter.
  • A lower setting makes the display appear darker.

XPS menu

Prints a page containing information on errors, including XML markup errors

PDF menu

Scales page content to fit the selected paper size

Prints annotations in a PDF

Do Not Print Print

PostScript menu

Prints a page containing the PostScript error

Show 14 more labels / short text on this page
Menu item Description · LCD Contrast · LCD Brightness · Menu item Description · Print Error Pages · Off On · Menu item Description · Scale to Fit · Yes No · Annotations · Menu item Description · Print PS Error · On Off · Understanding printer menus
Page 134 of the Lexmark 210 user manual — PCL Emul menu
Page 134 · click to enlarge
Page 134

Establishes the font search order

  • Resident is the factory default setting.
  • A formatted flash memory option card or printer hard disk must be installed in the printer and operating properly for this menu item to be available.
  • The flash memory option or printer hard disk cannot be Read/Write, Write, or password protected.
  • Job Buffer Size must not be set to 100%.

Enhances the contrast and sharpness of low-resolution images and smooths their color transitions

  • Off is the factory default setting.
  • Image Smoothing has no effect on images that are 300 dpi or higher in resolution.

PCL Emul menu

Specifies the set of fonts used by the Font Name menu item

Resident Disk Flash Download All

  • Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
  • Flash and Disk settings show all fonts resident in that option.
  • Flash option must be properly formatted and cannot be Read/Write, Write, or password protected.
  • Download shows all the fonts downloaded into RAM.
  • All shows all fonts available to any option.

Identifies a specific font and the option where it is stored

  • RO Courier is the factory default setting.
  • RO Courier shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, K for Disk, and D for download.
Show 10 more labels / short text on this page
Menu item Description · Font Priority · Resident Flash/Disk · Image Smoothing · On Off · Menu item Description · Font Source · Font Name · RO Courier · Understanding printer menus
Page 135 of the Lexmark 210 user manual — 10U PC-8 12U PC-850
Page 135 · click to enlarge
Page 135

Specifies the symbol set for each font name

10U PC-8 12U PC-850

  • 10U PC-8 is the US factory default setting.
  • 12U PC-850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25-point increments.

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed-space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01-cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on the page

  • Portrait is the factory default setting.
  • Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Sets the printer to print on A4-size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters.
Show 15 more labels / short text on this page
Menu item Description · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · 1–255 60 64 · PCL Emulation Settings · A4 Width · Understanding printer menus
Page 136 of the Lexmark 210 user manual — PCL Emul menu
Page 136 · click to enlarge
Page 136

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

  • Off is the factory default setting.
  • Setting alterations are duplicated in the PPDS menu.

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

  • Off is the factory default setting.
  • Setting alterations are duplicated in the PPDS menu.

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Off None 0–199 Assign Tray

  • Off is the factory default setting.
  • None is not an available selection. It is only displayed when it is selected by the PCL 5 interpreter.
  • None ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Man Env

Displays the factory default setting assigned to each tray, drawer, or feeder

Returns all tray, drawer, and feeder assignments to the factory default settings

Show 15 more labels / short text on this page
Menu item Description · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Def · None · Tray Renumber · Restore Defaults · Yes No · Understanding printer menus
Page 137 of the Lexmark 210 user manual — HTML menu
Page 137 · click to enlarge
Page 137

HTML menu

Intl CG Times Intl Courier Intl Univers Joanna MT Letter Gothic Lubalin Gothic Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery

Sets the default font for HTML documents

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text

1–255 pt Sets the default font size for HTML documents

  • 12 pt is the factory default setting.
  • Font size can be increased in 1-point increments.

1–400% Scales the default font for HTML documents

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Sets the page orientation for HTML documents

8–255 mm Sets the page margin for HTML documents

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1-mm increments.
Show 9 more labels / short text on this page
Menu item Description · Font Name · Menu item Description · Font Size · Scale · Orientation · Portrait Landscape · Margin Size · Understanding printer menus
Page 138 of the Lexmark 210 user manual — Image menu
Page 138 · click to enlarge
Page 138

Specifies whether to print backgrounds on HTML documents

Do Not Print Print

Image menu

Selects the optimal paper size, scaling, and orientation

  • On is the factory default setting.
  • The On setting overrides scaling and orientation settings for some images.

Inverts bi-tonal monochrome images

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

Show 10 more labels / short text on this page
Menu item Description · Backgrounds · Menu item Description · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Understanding printer menus
Page 139 of the Lexmark 210 user manual — Flash Drive menu
Page 139 · click to enlarge
Page 139

PictBridge menu

Selects the optimal photo size

Auto L 2L Hagaki Postcard Card Size 100x150 mm 4x6 inches 8x10 inches Letter A4 A5 JIS B5

  • Auto is the factory default setting.
  • If both the printer and the PictBridge-enabled camera have a value for this setting, the camera value always supersedes the printer value.

Selects the optimal photo layout

Auto Off 2 Up 3 Up 4 Up 6 Up 9 Up 12 Up 16 Up Index Print

  • Auto is the factory default setting.
  • If both the printer and the PictBridge-enabled camera have a value for this setting, the camera value always supersedes the printer value.

Selects the optimal quality

  • Normal is the factory default setting.
  • If both the printer and the PictBridge-enabled camera have a value for this setting, the camera value always supersedes the printer value.

Sets the tray the paper pulls from

Multipurpose tray Tray Manual Paper

  • Multipurpose tray is the factory default setting.
  • If both the printer and the PictBridge-enabled camera have a value for this setting, the camera value always supersedes the printer value.

Flash Drive menu

1–999 Specifies a default number of copies for each print job

Show 9 more labels / short text on this page
Menu item Description · Photo Size · Layout · Quality · Normal Draft Fine · Paper Source · Menu item Description · Copies · Understanding printer menus
Page 140 of the Lexmark 210 user manual — PictBridge menu
Page 140 · click to enlarge
Page 140

Sets a default paper source for all print jobs

Tray Manual Feeder Envelope Feeder

Stacks the pages of a print job in sequence when printing multiple copies

Off (1,1,1,2,2,2) On (1,2,1,2,1,2)

  • Off is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.

Controls whether the job prints on one side or both sides of the paper

2 sided 1 sided

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge specifies that binding be placed on the left edge of portrait pages and the top edge of landscape pages.
  • Short Edge specifies that binding be placed on the top edge of portrait pages and the left edge of landscape pages.

Specifies the orientation of a multiple-page sheet

Auto Long Edge Short Edge

  • Auto is the factory default setting. The printer chooses between portrait and landscape.
  • Long Edge uses landscape.
  • Short Edge uses portrait.

Specifies that multiple-page images be printed on one side of a sheet of paper

Off 2-Up 3-Up 4-Up 6-Up 9-Up 12-Up 16-Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Prints a border around each page image when using N-up (pages-side)

Show 10 more labels / short text on this page
Menu item Description · Paper Source · Collate · Sides (Duplex) · Duplex Binding · Orientation · N-up (pages-side) · N-up Border · None Solid · Understanding printer menus
Page 141 of the Lexmark 210 user manual — Help menu
Page 141 · click to enlarge
Page 141

Specifies the positioning of multiple-page images when using N-up (pages-side)

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of images and whether the images are in portrait or landscape orientation.

Specifies whether blank separator sheets are inserted

None Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray Multi-Purpose Feeder Envelope Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Multi-Purpose Feeder to appear as a menu setting.

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Help menu

The Help menu consists of a series of Help pages that are stored in the printer as PDFs. They contain information about using the printer and performing printing tasks.

English, French, German, and Spanish translations are stored in the printer. Other translations are available on the Software and Documentation CD.

Print All Prints all the guides

Color Quality Guide Provides information about adjusting and customizing color printing

Print Quality Guide Provides information about solving print quality issues

Printing Guide Provides information about loading paper and other speciality media

Supplies Guide Provides part numbers for ordering supplies

Media Guide Provides a list of the paper sizes supported in trays, drawers, and feeders

Print Defects Guide Provides help in determining the printer part causing a repetitive defect

Show 7 more labels / short text on this page
Menu item Description · N-up Ordering · Separator Sheets · Separator Source · Blank Pages · Menu item Description · Understanding printer menus
Page 142 of the Lexmark 210 user manual — Help menu
Page 142 · click to enlarge
Page 142

Menu Map Provides a list of the printer control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Moving Guide Provides instructions for safely moving the printer

Menu item Description · Understanding printer menus

Page 143 of the Lexmark 210 user manual — Close door <x>
Page 143 · click to enlarge
Page 143

Understanding printer messages

When Manual Feeder appears on the display, it refers to the multipurpose tray, which is also referred to as the multipurpose feeder.

List of status and error messages

Activating Menu Changes

Wait for the message to clear.

Busy

Wait for the message to clear.

Calibrating

Wait for the message to clear.

Cancel not available

Wait for the message to clear.

Canceling

Wait for the message to clear.

Change <src> to <x>

  • Press the down arrow button until

if the paper was changed. • Press the down arrow button until

Continue appears, and then press

  • Use Current appears, and then press the down arrow button to print on the paper currently in the printer.
  • Cancel the current print job.
  • For more information, select Show Me .

Clearing job accounting statistics

Wait for the message to clear.

Close door <x>

1 Press the down arrow button until

Show me appears, and then press

An image of the open door appears.

2 Close the specified door.

Understanding printer messages

Page 144 of the Lexmark 210 user manual — Encrypting disk x/y XX% DO NOT POWER OFF
Page 144 · click to enlarge
Page 144

Copies

Enter the desired number of copies.

Defragmenting Flash DO NOT POWER OFF

Wait for the message to clear.

Delete/Delete all/Delete all confidential jobs

  • Press the down arrow button until

to delete the specified job. • Press

Continue appears, and then press

to delete the job.

Deleting

Wait for the message to clear.

Disabling DLEs

Wait for the message to clear.

Disabling Menus

Wait for the message to clear.

Disk Corrupted. Reformat?

The printer attempted to recover a disk, but was not able to do so. Reformat appears. Press

to reformat the disk.

Disk recovery x/y XX% DO NOT POWER OFF

Wait for the message to clear.

Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.

Enabling Menus

Wait for the message to clear.

Encrypting disk x/y XX% DO NOT POWER OFF

Wait for the message to clear.

The percentage completed appears on the display.

Understanding printer messages

Page 145 of the Lexmark 210 user manual — Invalid Engine Code
Page 145 · click to enlarge
Page 145

Enter PIN

Enter the PIN you created in Print Properties when the confidential job was sent for printing.

Enter PIN to lock

Enter the PIN you created to lock the control panel and prevent menu changes.

Flushing buffer

Wait for the message to clear.

Formatting Disk x/y XX% DO NOT POWER OFF

Wait for the message to clear.

The percentage completed appears on the display.

Formatting Flash DO NOT POWER OFF

Wait for the message to clear.

Insert Tray <x>

Insert the specified tray into the printer.

Internal System Error, Reload Bookmarks

1 Press the down arrow button until

to clear the message and continue printing.

Continue appears, and then press

2 Reload the bookmarks.

Internal System Error, Reload Security Certificates

  • Reload the security certificates.
  • Press the down arrow button until

to clear the message and continue printing.

Continue appears, and then press

Invalid Engine Code

You need to download valid engine code for the printer.

For more information, visit the Lexmark Web site at www.lexmark.com, or contact customer support.

Understanding printer messages

Page 146 of the Lexmark 210 user manual — No jobs to cancel
Page 146 · click to enlarge
Page 146

Invalid Network Code

You need to download valid network printing code for the internal print server. The internal print server is a hardware option installed inside the printer.

Invalid PIN

Enter a valid PIN.

Load multipurpose tray with <x>

  • Load the specified paper in the multipurpose tray.

. • Press the down arrow button until

to clear the message and continue printing.

Continue appears, and then press

If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default source. • Cancel the current job.

Load <src> with <x>

  • Load the paper tray or other source with the correct paper type and size.

. • Cancel the current job.

Menus are disabled

The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your system support person for help.

Network/Network <x>

The printer is connected to the network.

Network indicates that the printer is using the standard network port built into the printer system board. Network <x> indicates that an internal print server is installed inside the printer or that the printer is connected to an external print server.

No held jobs

Wait for the message to clear.

No jobs to cancel

Wait for the message to clear.

Understanding printer messages

Page 147 of the Lexmark 210 user manual — Remote Management Active DO NOT POWER OFF
Page 147 · click to enlarge
Page 147

Power Saver

The printer is saving power while it waits for the next print job.

  • Send a job to print.
  • Press

to warm the printer to normal operating temperature. Afterwards, Ready appears.

Printer locked, enter PIN to unlock

The control panel is locked. Enter the correct PIN to unlock it.

Printing

Wait for the message to clear.

Programming disk DO NOT POWER OFF

Wait for the message to clear.

Programming flash DO NOT POWER OFF

Wait for the message to clear.

Programming System Code DO NOT POWER OFF

Wait for the message to clear.

Reading USB drive DO NOT REMOVE

Wait for the message to clear.

Ready

The printer is ready to receive print jobs.

Remote Management Active DO NOT POWER OFF

The printer settings are being configured. Wait for the message to clear.

Understanding printer messages

Page 148 of the Lexmark 210 user manual — Restoring Factory Defaults
Page 148 · click to enlarge
Page 148

Remove all color supplies

The printer is set for Color Lock Out printing in the Config menu. Try one of the following methods:

  • Remove all color toner cartridges and photoconductor units.

to clear the message and print in Color Lock Out mode.

Continue appears, and then press

Remove Packaging Materials

1 Remove all packing material from the printer.

2 Make sure the fuser, transfer module, trays, and supplies are installed correctly.

3 Press the down arrow button until Show Areas appears, and then press

A tutorial appears on the display indicating the actions you need to take to complete setup.

Remove paper from standard bin

The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and continue printing.

Resetting Fuser Count

Wait for the message to clear.

Resetting the printer

Wait for the message to clear.

Restore Held Jobs?

  • Press the down arrow button until

to restore all held jobs stored on the printer hard disk. • Press the down arrow button until

Continue appears, and then press

Do not restore appears, and then press

. No print jobs will be restored.

Restoring Factory Defaults

Wait for the message to clear.

When factory default settings are restored:

  • All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
  • All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom settings in the Serial <x>, Network, Infrared, LocalTalk, and USB menus.

Understanding printer messages

Page 149 of the Lexmark 210 user manual — USB/USB <x>
Page 149 · click to enlarge
Page 149

Restoring Held Job(s) x/y

  • Wait for the message to clear.
  • Press the down arrow button until

to delete unrestored held jobs.

Quit restoring appears, and then press

Serial <x>

The printer is using a serial cable connection. The serial port is the active communication link.

Some held jobs were not restored

Press the down arrow button until

Continue appears, and then press

to delete the specified job.

Some held jobs will not be restored

  • Press the down arrow button until

to clear the message and resume printing. • Cancel the current job.

Continue appears, and then press

Standard Bin Full

Remove the stack of paper from the standard exit bin to clear the message.

Submitting Selection

Wait for the message to clear.

Tray <x> Empty

Load paper in the tray to clear the message.

Tray <x> Low

Load paper in the specified tray to clear the message.

Tray <x> Missing

Insert the specified tray into the printer.

USB/USB <x>

The printer is using a USB cable connection. The USB port is the active communication link.

Understanding printer messages

Page 150 of the Lexmark 210 user manual — 34 Short paper
Page 150 · click to enlarge
Page 150

Waiting

The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data.

  • Press

to print the contents of the buffer. • Cancel the current print job.

31 Missing or defective <color> cartridge

The specified toner cartridge is either missing or not functioning properly.

  • Remove the specified toner cartridge, and then reinstall it.
  • Remove the specified toner cartridge, and then install a new one.

32 Replace unsupported <color> cartridge

Remove the specified toner cartridge, and then install a supported one.

  • 34 Incorrect paper type, check <src>
  • Load the appropriate paper or other specialty media in the proper tray.
  • Check tray length and width guides, and make sure the paper is properly loaded in the tray.
  • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
  • Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure the paper is large enough for the data being printed.
  • Cancel the current print job.
  • 34 Incorrect paper size, check <src>
  • Load the appropriate paper or other specialty media in the proper tray.
  • Press the down arrow button until
  • to clear the message and print the job using a different paper tray.
  • Check tray length and width guides, and make sure the paper is properly loaded in the tray.
  • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
  • Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure the paper is large enough for the data being printed.
  • Cancel the current print job.

Continue appears, and then press

34 Short paper

Try one or more of the following:

  • Load the appropriate paper in the tray.
  • Press the down arrow button until
  • to clear the message and print the job using a different paper tray.
  • Check the tray length and width guides, and make sure the paper is properly loaded in the tray.
  • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.

Continue appears, and then press

Understanding printer messages

Page 151 of the Lexmark 210 user manual — 51 Defective flash detected • Press the down arrow button until
Page 151 · click to enlarge
Page 151
  • Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Cancel the current print job.

35 Insufficient memory to support Resource Save feature • Press the down arrow button until

  • to disable Resource Save and continue printing.
  • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
  • Install additional memory.

Continue appears, and then press

37 Insufficient memory for Flash Memory Defragment operation • Press the down arrow button until

  • to stop the defragment operation and continue printing.
  • Delete fonts, macros, and other data in printer memory.
  • Install additional printer memory.

Continue appears, and then press

37 Insufficient memory to collate job • Press the down arrow button until

to print the portion of the job already stored and begin collating the rest of the print job. • Cancel the current print job.

Continue appears, and then press

37 Insufficient memory, some held jobs will not be restored

The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.

Press the down arrow button until

Continue appears, and then press

to clear the message.

38 Memory full • Press the down arrow button until

  • to clear the message.
  • Cancel the current print job.
  • Install additional printer memory.

Continue appears, and then press

39 Page is too complex to print • Press the down arrow button until

  • to clear the message and continue printing.
  • Cancel the current print job.
  • Install additional printer memory.

Continue appears, and then press

51 Defective flash detected • Press the down arrow button until

to clear the message and continue printing. • Cancel the current print job.

Continue appears, and then press

Understanding printer messages

Page 152 of the Lexmark 210 user manual — 56 Parallel port <x> disabled • Press the down arrow button until
Page 152 · click to enlarge
Page 152

52 Flash full • Press the down arrow button until

to clear the message and continue printing.

Continue appears, and then press

  • Downloaded fonts and macros not previously stored in flash memory are deleted.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected • Press the down arrow button until

to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

Continue appears, and then press

54 Network <x> software error • Press the down arrow button until

  • to continue printing.
  • Turn the printer power off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

Continue appears, and then press

  • 54 Serial option <x> error
  • Check that the serial cable is connected correctly and is the proper one for the serial port.
  • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer.
  • Press the down arrow button until

to continue printing. • Turn the printer power off and then back on to reset the printer.

Continue appears, and then press

54 Standard network software error • Press the down arrow button until

  • to continue printing.
  • Turn the printer power off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

Continue appears, and then press

55 Unsupported option in slot <x>

1 Turn the printer power off.

2 Unplug the power cord from the wall outlet.

3 Remove the unsupported optional interface card or internal print server from the printer system board.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer power back on.

56 Parallel port <x> disabled • Press the down arrow button until

Continue appears, and then press

to clear the message.

The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

Understanding printer messages

Page 153 of the Lexmark 210 user manual — 61 Remove defective hard disk • Press the down arrow button until
Page 153 · click to enlarge
Page 153

56 Serial port <x> disabled • Press the down arrow button until

Continue appears, and then press

to clear the message.

The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item is not set to Disabled.

56 Standard USB port disabled • Press the down arrow button until

Continue appears, and then press

to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

56 USB port <x> disabled • Press the down arrow button until

Continue appears, and then press

to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

57 Configuration change, held jobs were not restored

Press the down arrow button until

Continue appears, and then press

to clear the message.

58 Too many flash options installed

1 Turn the printer power off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess flash memory.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer power back on.

58 Too many trays attached

1 Turn the printer power off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer power back on.

61 Remove defective hard disk • Press the down arrow button until

to clear the message and continue printing. • Install a different hard disk before performing any operations that require a hard disk.

Continue appears, and then press

Understanding printer messages

Page 154 of the Lexmark 210 user manual — 83 Replace transfer module
Page 154 · click to enlarge
Page 154

62 Disk full • Press the down arrow button until

  • to clear the message and continue processing.
  • Delete fonts, macros, and other data stored on the hard disk.
  • Install a larger hard disk.

Continue appears, and then press

63 Unformatted disk • Press the down arrow button until

to clear the message and continue printing. • Format the disk.

Continue appears, and then press

If the error message remains, the hard disk may be defective and require replacing.

80 Fuser life warning • Press the down arrow button until

to clear the message and continue printing. • Order a replacement fuser immediately. When print quality is reduced, install the new fuser using the instruction sheet that came with the replacement part.

Continue appears, and then press

80 Replace fuser

Replace the fuser using the instruction sheet that came with the replacement part.

82 Replace waste toner box

The waste toner box is full.

1 Replace the waste toner box using the instruction sheet that came with the replacement part.

2 Clear the paper path.

82 Waste toner box missing

Reinsert the waste toner box into the printer.

82 Waste toner box nearly full

Order a replacement waste toner box immediately.

  • To learn how to insert a waste toner box, press the down arrow button until Show Me appears, and then press

. • Press the down arrow button until

to clear the message and continue printing.

Continue appears, and then press

83 Replace transfer module

Replace the transfer module using the instruction sheet that came with the replacement part.

Understanding printer messages

Page 155 of the Lexmark 210 user manual — 88 Replace <color> cartridge
Page 155 · click to enlarge
Page 155

83 Transfer module life warning • Press the down arrow button until

. • Order a replacement transfer module immediately. When print quality is reduced, install the new transfer module using the instruction sheet that came with the replacement part.

Continue appears, and then press

83 Transfer module missing

Insert the transfer module into the printer.

84 <color> photoconductor low

1 Press the down arrow button until

Continue appears, and then press

2 Order a replacement photoconductor immediately. When print quality is reduced, install the new photoconductor using the instruction sheet that came with the replacement part.

84 <color> photoconductor nearly low

1 Press the down arrow button until

Continue appears, and then press

2 Order a replacement photoconductor immediately. When print quality is reduced, install the new photoconductor using the instruction sheet that came with the replacement part.

84 Replace <color> photoconductor

Replace the specified color photoconductor using the instruction sheet that came with the replacement part.

88 <color> cartridge low

When this message appears, the toner is low. When the print becomes faded, replace the specified toner cartridge.

  • To clear this message and continue printing, press the down arrow button until

Continue appears, and then press

88 <color> cartridge nearly low

When this message appears, the toner is low. When the print becomes faded, replace the specified toner cartridge.

  • To clear this message and continue printing, press the down arrow button until

Continue appears, and then press

88 Replace <color> cartridge

1 The toner cartridge is exhausted. Replace the specified toner cartridge.

2 Clear the paper path to clear the message and continue printing.

Understanding printer messages

Page 156 of the Lexmark 210 user manual — 1565 Emul Error Load Emul Option
Page 156 · click to enlarge
Page 156

200–250.yy Paper jam

1 Clear the paper path.

2 After clearing the paper path, press

to resume printing.

900–999 Service <message>

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Check all cable connections.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

If the service message appears again, contact Customer Support, and report the message.

1565 Emul Error Load Emul Option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.

To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.

Understanding printer messages

Page 157 of the Lexmark 210 user manual — Cleaning the printhead lenses
Page 157 · click to enlarge
Page 157

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit bin.

3 Dampen a clean, lint-free cloth with water.

4 Wipe only the outside of the printer, making sure to include the standard exit bin.

5 Make sure the paper support and standard exit bin are dry before beginning a new print job.

Cleaning the printhead lenses

Clean the printhead lenses when you encounter print quality problems.

1 Open the front door.

Lexmark 210 — Cleaning the printhead lenses diagram (page 157)
Fig. 84 · Cleaning the printhead lenses

Maintaining the printer

Page 158 of the Lexmark 210 user manual — Maintaining the printer
Page 158 · click to enlarge
Page 158
Lexmark 210 — Maintaining the printer diagram (page 158)
Fig. 85 · Maintaining the printer

2 Remove all four toner cartridges. Do not remove the photoconductor units for this procedure.

3 Locate the four printhead lenses.

Lexmark 210 — Maintaining the printer diagram (page 158)
Fig. 86 · Maintaining the printer

4 Clean the lenses using a can of compressed air.

5 Reinstall the four toner cartridges.

Maintaining the printer

Page 159 of the Lexmark 210 user manual — Checking the status of supplies from the printer control panel
Page 159 · click to enlarge
Page 159

6 Close the front door.

Lexmark 210 — Storing supplies diagram (page 159)
Fig. 87 · Storing supplies

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press the down arrow button until

Status / Supplies appears, and then press

3 Press the down arrow button until

View supplies appears, and then press

The status of each supply appears.

Maintaining the printer

Page 160 of the Lexmark 210 user manual — Ordering a fuser or a transfer module
Page 160 · click to enlarge
Page 160

Checking the status of supplies from a network computer

1 Open a Web browser.

2 In the address bar, type the IP address of the network printer (for example,192.264.263.17).

3 Press Enter.

The Device Status Page appears. A summary of supply levels is displayed.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Ordering toner cartridges

When 88 Cyan cartridge low, 88 Magenta cartridge low, 88 Yellow cartridge low, or 88 Black cartridge low appears, order a new cartridge.

When 88 Replace Cyan cartridge, 88 Replace Magenta cartridge, 88 Replace Yellow cartridge, or 88 Replace Black cartridge appears, you must replace the specified cartridge.

Estimated cartridge yield is based on the ISO / IEC 19798 standard (with about 5% coverage per color). Extremely low print coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may cause cartridge parts to fail prior to exhaustion of toner.

Ordering photoconductors

When , 84 photoconductor low, or 84 <color> photoconductor nearly low appears, order a replacement photoconductor.

When 84 Replace <color> photoconductor appears, you must replace the specified photoconductor.

Part name Part number

Ordering a fuser or a transfer module

When 80 Fuser Life Warning or 83 Transfer Module Life Warning appears, order a replacement fuser or a transfer module.

Photoconductor C734X20G · Photoconductor, Multi-Pack C734X24G · Maintaining the printer

Page 161 of the Lexmark 210 user manual — Ordering a waste toner box
Page 161 · click to enlarge
Page 161

When 80 Replace Fuser or 83 Replace Transfer Module appears, install the new fuser or the new transfer module. For installation information, see the documentation that came with the part.

Part name Part number

Fuser 40X5095 (100 volt) 40X5093 (115 volt) 40X5094 (230 volt)

Ordering a waste toner box

When 82 Waste toner box nearly full appears, order a replacement waste toner box. When 82 Replace waste toner box appears, you must replace the waste toner box.

Part name Part number

Waste Toner Box C734X77G

Transfer Module 40X5096 · Maintaining the printer

Page 162 of the Lexmark 210 user manual — Replacing a photoconductor
Page 162 · click to enlarge
Page 162

Replacing Supplies

Replacing a photoconductor

There are three different display messages which may appear when a photoconductor replacement is necessary: 84 Replace <color> photoconductor, 84 <color> photoconductor nearly low, or 84 <color> photoconductor low.

Replacing a photoconductor is a two-part process. First, complete the illustrated steps to replace the photoconductor, and then reset the life count and clear printer messages.

1 Open the front door.

Lexmark 210 — Replacing a photoconductor diagram (page 162)
Fig. 88 · Replacing a photoconductor

2 Pull the specified photoconductor up, and then slide it to the right to remove it from the printer.

Lexmark 210 — Replacing a photoconductor diagram (page 162)
Fig. 89 · Replacing a photoconductor

Maintaining the printer

Page 163 of the Lexmark 210 user manual — Replacing Supplies
Page 163 · click to enlarge
Page 163

3 Unpack the replacement photoconductor.

Lexmark 210 — Replacing Supplies diagram (page 163)
Fig. 90 · Replacing Supplies

4 Align and insert the left end of the photoconductor, and then snap the right end into place.

Lexmark 210 — Replacing Supplies diagram (page 163)
Fig. 91 · Replacing Supplies

5 Remove the red packing strip from the top of the photoconductor.

Lexmark 210 — Replacing Supplies diagram (page 163)
Fig. 92 · Replacing Supplies

Maintaining the printer

Page 164 of the Lexmark 210 user manual — Replacing Supplies
Page 164 · click to enlarge
Page 164

6 Place the old photoconductor into the replacement photoconductor box, and then place the return label on the box for shipping to Lexmark for recycling.

Lexmark 210 — Replacing Supplies diagram (page 164)
Fig. 93 · Replacing Supplies

7 Close the front door.

8 If you see 84 Replace <color> photoconductor, 84 <color> photoconductor nearly low, or 84 <color> photoconductor low on the printer control panel, press the down arrow button until

Supply Replaced appears, and then press

Replaced <color> photoconductor appears.

Yes appears.

to clear the message.

If you are prompted to replace only one photoconductor, then the Ready screen will appear, and the task is complete. If you are prompted to replace additional photoconductors, repeat Steps 8 and 9 for each additional photoconductor. After all photoconductors have been replaced, Ready appears, and the task is complete.

9 Press · Maintaining the printer

Page 165 of the Lexmark 210 user manual — Replacing a toner cartridge
Page 165 · click to enlarge
Page 165

If you see Ready on the printer display screen after you have replaced a photoconductor, follow Steps 1 through 7 below.

1 To specify the replaced photoconductor, press

Supplies Menu appears.

Replace Supply appears.

4 Press the down arrow button until

Black photoconductor appears, depending on the photoconductor you just replaced.

Yellow photoconductor, or

<color> photoconductor replaced appears.

Yes appears.

until Ready appears.

The task is complete.

Replacing a toner cartridge

When 88 Replace <color> cartridge, 88 <color> cartridge nearly low, or 88 <color> cartridge low appears on the printer control panel, or when print becomes faded, try to extend the life of the specified cartridge.

1 Open the front door.

Show 9 more labels / short text on this page
2 Press · 3 Press · All, · Cyan photoconductor, · Magenta photoconductor, · 5 Press · 6 Press · 7 Press · Maintaining the printer
Page 166 of the Lexmark 210 user manual — Replacing a toner cartridge
Page 166 · click to enlarge
Page 166

2 Pull up and out on the green tabs of the specified cartridge to remove it from the printer.

Lexmark 210 — Replacing a toner cartridge diagram (page 166)
Fig. 94 · Replacing a toner cartridge

3 Shake the cartridge front to back and side to side to redistribute the toner.

Lexmark 210 — Replacing a toner cartridge diagram (page 166)
Fig. 95 · Replacing a toner cartridge

4 Reinsert the cartridge to continue printing.

Lexmark 210 — Replacing a toner cartridge diagram (page 166)
Fig. 96 · Replacing a toner cartridge

5 Repeat this process multiple times until printed text and graphics remain faded.

When printed text and graphics remain faded, replace the specified cartridge. Repeat steps 1 and 2, and then follow the steps below.

Maintaining the printer

Page 167 of the Lexmark 210 user manual — Replacing a toner cartridge
Page 167 · click to enlarge
Page 167

6 Unpack a new cartridge.

Lexmark 210 — Replacing a toner cartridge diagram (page 167)
Fig. 97 · Replacing a toner cartridge

7 Place the old cartridge in the replacement cartridge shipping box, and then attach the return label to the box for shipping.

Lexmark 210 — Replacing a toner cartridge diagram (page 167)
Fig. 98 · Replacing a toner cartridge

8 Shake the new cartridge front to back and side to side to evenly distribute the toner.

Lexmark 210 — Replacing a toner cartridge diagram (page 167)
Fig. 99 · Replacing a toner cartridge

Maintaining the printer

Page 168 of the Lexmark 210 user manual — Replacing a toner cartridge
Page 168 · click to enlarge
Page 168

9 Remove the red packing strips from the new cartridge.

Lexmark 210 — Replacing a toner cartridge diagram (page 168)
Fig. 100 · Replacing a toner cartridge

10 Insert the new cartridge into the printer.

11 Close the front door.

If either of these messages appears, follow the steps below to clear the printer control panel message and continue printing.

1 Open the front door.

2 Remove the specified cartridge.

Maintaining the printer

Page 169 of the Lexmark 210 user manual — Replacing the waste toner box
Page 169 · click to enlarge
Page 169

3 Reinstall the specified cartridge.

4 Close the front door.

5 Check the printer control panel to see if it is clear of messages.

6 Repeat as needed for additional toner cartridge replacement.

Replacing the waste toner box

Replace the waste toner box when 82 Replace waste toner box or 82 Waste toner box nearly full appears. The printer will not continue printing until the waste toner box is replaced.

1 Unpack the replacement waste toner box, and remove it from its shipping box.

Lexmark 210 — Replacing the waste toner box diagram (page 169)
Fig. 101 · Replacing the waste toner box

2 Locate the waste toner box release button on the left side of the printer.

3 Press the release button to the left, and pull the waste toner box out to remove it from the printer.

Lexmark 210 — Replacing the waste toner box diagram (page 169)
Fig. 102 · Replacing the waste toner box

4 Peel the seal from the side of the full waste toner box as shown, and then place it over the hole to seal off the waste toner box.

Lexmark 210 — Replacing the waste toner box diagram (page 169)
Fig. 103 · Replacing the waste toner box

5 Place the sealed waste toner box in the recycling bag.

Maintaining the printer

Page 170 of the Lexmark 210 user manual — Before moving the printer
Page 170 · click to enlarge
Page 170

6 Place the bag into the shipping box you just removed the replacement part from.

Lexmark 210 — Moving the printer diagram (page 170)
Fig. 104 · Moving the printer

7 Peel the recycling label off, and place it on the shipping box.

Lexmark 210 — Moving the printer diagram (page 170)
Fig. 105 · Moving the printer

8 Insert the new waste toner box into the printer.

Lexmark 210 — Moving the printer diagram (page 170)
Fig. 106 · Moving the printer

Moving the printer

Before moving the printer

Maintaining the printer

Page 171 of the Lexmark 210 user manual — Setting the printer up in a new location
Page 171 · click to enlarge
Page 171
Lexmark 210 — Moving the printer to another location diagram (page 171)
Fig. 107 · Moving the printer to another location

Follow these guidelines to avoid personal injury or printer damage:

  • Always use at least two people to lift the printer.
  • Always turn off the printer using the power switch before moving it.
  • Disconnect all cords and cables from the printer before moving it.
  • Remove the printer from the options before moving it.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Remove the printer from the options before moving it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Setting the printer up in a new location

When the printer is set up, allow clearance around it as shown.

1 152.4 mm (6.0 in.)

2 101.6 mm (4.0 in.)

3 609.6 mm (24.0 in.)

4 101.6 mm (4.0 in.)

5 304.8 mm (12.0 in.)

Maintaining the printer

Page 172 of the Lexmark 210 user manual — Shipping the printer
Page 172 · click to enlarge
Page 172

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Maintaining the printer

Page 173 of the Lexmark 210 user manual — Checking the virtual display
Page 173 · click to enlarge
Page 173

Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions including:

  • Viewing a virtual display of the printer control panel
  • Checking the status of the printer supplies
  • Configuring printer settings
  • Configuring network settings
  • Viewing reports

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.

  • If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.
  • For more information, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> .

Checking the virtual display

When the Embedded Web Server is open, a virtual display appears in the top left corner of the screen. It works as an actual display would work on a printer control panel, showing printer messages.

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.

The virtual display appears in the top left corner of the screen.

Administrative support

Page 174 of the Lexmark 210 user manual — Viewing reports
Page 174 · click to enlarge
Page 174

Checking the device status

Using the Embedded Web Server, you can view paper tray settings, the level of toner in the print cartridge, the percentage of life remaining in the maintenance kit, and capacity measurements of certain printer parts. To view the device status:

1 Type the printer IP address in the address field of your Web browser.

2 Click Device Status.

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.

To set up e-mail alerts:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Under Other Settings, click E-mail Alert Setup.

4 Select the items for notification, and type in the e-mail addresses.

5 Click Submit.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.

To view reports from a network printer:

1 Type the printer IP address into the address field of your Web browser.

2 Click Reports, and then click the type of report you want to view.

Administrative support

Page 175 of the Lexmark 210 user manual — Restoring the factory default settings
Page 175 · click to enlarge
Page 175

Restoring the factory default settings

If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings. For more information, see “Printing a menu settings page” on page 37.

1 From the printer control panel, press

2 Press the down arrow button until

Settings appears, and then press

3 Press the down arrow button until

General Settings appears, and then press

4 Press the down arrow button until

Factory Defaults appears, and then press

5 Press the down arrow button until

Restore Now appears, and then press

Restoring Factory Defaults appears.

Administrative support

Page 176 of the Lexmark 210 user manual — M AKE SURE THE PRINTER IS READY TO PRINT
Page 176 · click to enlarge
Page 176

Troubleshooting

Checking an unresponsive printer

If your printer is not responding, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electrical equipment plugged into the outlet is working.
  • The printer is turned on.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem.

Solving printing problems

Multiple-language PDFs do not print

The documents contain unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.

2 Click the printer icon.

The Print dialog appears.

3 Select Print as image.

4 Click OK.

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.

Jobs do not print

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready or Power Saver appears on the display before sending a job to print.

Troubleshooting

Page 177 of the Lexmark 210 user manual — P ARTIAL JOB , NO JOB , OR BLANK PAGE PRINTS
Page 177 · click to enlarge
Page 177

C HECK TO SEE IF THE STANDARD EXIT BIN IS FULL

Remove the stack of paper from the standard exit bin.

C HECK TO SEE IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED

  • Verify that you are using the correct printer software.
  • If you are using a USB port, make sure you are running a supported operating system and using compatible printer software.

M AKE SURE THE INTERNAL PRINT SERVER IS INSTALLED PROPERLY AND WORKING

  • Make sure the internal print server is properly installed and that the printer is connected to the network. For more information about installing a network printer, click View User's Guide and Documentation on the Software and Documentation CD.
  • Print a network setup page and check that the status shows Connected . If the status is Not Connected , check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.

M AKE SURE YOU ARE USING A RECOMMENDED PRINTER CABLE

For more information, visit the Lexmark Web site at www.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:

P ARTIAL JOB , NO JOB , OR BLANK PAGE PRINTS

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then print it again.
  • For PDF documents, recreate the PDF and then print it again.

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.

  • For Windows users, open Print Properties. From the Print and Hold dialog, select the "Keep duplicate documents" check box under the User name text box before entering a PIN number.
  • For Macintosh users, save each print job, naming each job differently, and then send the individual jobs to the printer.

Troubleshooting

Page 178 of the Lexmark 210 user manual — Tray linking does not work
Page 178 · click to enlarge
Page 178

M AKE SURE THE PRINTER HAS SUFFICIENT MEMORY

Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the job.

C HANGE THE P AGE P ROTECT SETTING TO O FF

1 From the printer control panel, press

2 Press the down arrow button until

Settings appears, and then press

3 Press the down arrow button until

General Settings appears, and then press

4 Press the down arrow button until

Print Recovery appears, and then press

5 Press the down arrow button until

Page Protect appears, and then press

6 Press the down arrow button until

Off appears, and then press

C HANGE ENVIRONMENTAL SETTINGS

When using Eco-Mode or Quiet Mode settings, you may notice a reduction in performance. If you want to change the settings and need more information, then see “Using Eco-Mode” on page 51 or “Reducing printer noise” on page 52.

Job prints from the wrong tray or on the wrong paper

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

Incorrect characters print

Make sure the printer is not in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.

Tray linking does not work

ARE THE SAME SIZE AND TYPE OF PAPER LOADED IN EACH TRAY?

  • Load the same size and type of paper in each tray.
  • Move the paper guides to the correct positions for the paper size loaded in each tray.

Troubleshooting

Page 179 of the Lexmark 210 user manual — R ESET THE PRINTER
Page 179 · click to enlarge
Page 179

ARE THE PAPER SIZE AND PAPER TYPE SETTINGS THE SAME FOR EACH TRAY?

  • Print a menu settings page, and compare the settings for each tray.
  • If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From the Finishing menu or Print Properties, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory or an optional hard disk.

Unexpected page breaks occur

Increase the Print Timeout value:

1 From the printer control panel, press

2 Press the down arrow button until

Settings appears, and then press

3 Press the down arrow button until

General Settings appears, and then press

4 Press the down arrow button until

Timeouts appears, and then press

5 Press the down arrow button until

Print Timeout appears, and then press

6 Press the right arrow button until the desired value appears, and then press

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait for about 10 seconds, and then turn the printer on.

Troubleshooting

Page 180 of the Lexmark 210 user manual — Hard disk with adapter
Page 180 · click to enlarge
Page 180

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, reinstall it.

M AKE SURE THE OPTION IS AVAILABLE IN THE PRINTER DRIVER

It may be necessary to manually add the option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 38.

M AKE SURE THE OPTION IS SELECTED

From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser.

Trays / Drawers

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Open the paper tray.

2 Check for paper jams or misfeeds.

3 Make sure the paper tray closes properly.

R ESET THE PRINTER

Turn the printer off. Wait 10 seconds. Turn the printer back on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Hard disk with adapter

Make sure the hard disk is securely connected to the printer system board.

Troubleshooting

Page 181 of the Lexmark 210 user manual — USB/parallel interface card
Page 181 · click to enlarge
Page 181

Internal Solutions Port

If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or more of the following:

C HECK THE ISP CONNECTIONS

  • Make sure the ISP is securely attached to the printer system board.
  • Make sure the cable is securely connected to the correct connector.

C HECK THE CABLE

Make sure you are using the correct cable and that it is securely connected.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For information about installing software for network printing, see the Networking Guide on the Software and Documentation CD

Internal print server

If the internal print server does not operate correctly, these are possible solutions. Try one or more of the following:

C HECK THE PRINT SERVER CONNECTIONS

  • Make sure the internal print server is attached securely to the printer system board.
  • Make sure you are using the correct (optional) cable and that it is securely connected.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For information about installing software for network printing, click Additional on the Software and Documentation CD, and then select the Networking Guide link under Publications on this CD.

Memory card

Make sure the memory card is securely connected to the printer system board.

USB/parallel interface card

Check the USB/parallel interface card connections:

  • Make sure the USB/parallel interface card is securely connected to the printer system board.
  • Make sure you are using the correct cable and that it is securely connected.

Troubleshooting

Page 182 of the Lexmark 210 user manual — Page that jammed does not reprint after you clear the jam
Page 182 · click to enlarge
Page 182

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

C HECK THE PAPER

Use recommended paper and other specialty media. For more information, see the chapter about paper and specialty media guidelines.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

H AS THE PAPER ABSORBED MOISTURE DUE TO HIGH HUMIDITY ?

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

The paper path is not clear. Clear jammed paper from the entire paper path, and then press

Page that jammed does not reprint after you clear the jam

In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:

2 Press the down arrow button until

Settings appears, and then press

3 Press the down arrow button until

General Settings appears, and then press

4 Press the down arrow button until

Print Recovery appears, and then press

5 Press the down arrow button until

Jam Recovery appears, and then press

6 Press the down arrow button until

Auto appears, and then press

1 Press · On or · Troubleshooting

Page 183 of the Lexmark 210 user manual — Characters have jagged or uneven edges
Page 183 · click to enlarge
Page 183

Solving print quality problems

The information in the following topics may help you solve print quality problems. If these suggestions do not correct the problem, contact Customer Support. You may have a printer part that requires adjustment or replacement.

Isolating print quality problems

To help isolate print quality problems, print the print quality test pages:

1 Make sure paper is loaded in Tray 1.

2 Turn the printer off.

3 From the printer control panel, press and hold

and the right arrow button while turning the printer on.

4 Release both buttons when the clock appears, and wait for Config Menu to appear.

5 Press the down arrow button until

Prt Quality Pgs appears, and then press

The print quality test pages print.

6 Press the down arrow button until

Exit Config Menu appears, and then press

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Blank pages

Packaging materials have not been removed from the toner cartridge.

Remove the packaging materials from the toner cartridge, and reinstall it.

  • Toner is low.
  • Remove the toner cartridge from the printer. Shake the cartridge back and forth several times, and then reinstall it.
  • Install a new toner cartridge.

Toner cartridge is defective or empty. Replace the toner cartridge.

Printer requires servicing. Call for service.

Characters have jagged or uneven edges

Lexmark 210 — Characters have jagged or uneven edges diagram (page 183)
Fig. 108 · Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.

Cause Solution · Troubleshooting

Page 184 of the Lexmark 210 user manual — Clipped images
Page 184 · click to enlarge
Page 184

Color misregistration

Color has shifted outside of the appropriate area or has been superimposed over another color area.

1 Recalibrate the printer. • Perform Color Adjust from the Quality menu 2 Remove and reinstall the photoconductor. 3 Adjust the color alignment. For more information, see “Adjusting the color alignment” on page 184.

Lexmark 210 — Color misregistration diagram (page 184)
Fig. 109 · Color misregistration

Adjusting the color alignment

1 Make sure that the printer is turned off.

2 From the printer control panel, press and hold

and the right arrow button while turning the printer on.

3 Release both buttons when the clock appears.

The printer performs its power-on sequence, and then Config Menu appears.

4 Press the down arrow button until

Color Alignment appears, and then press

again to print the alignment page.

6 Press the down arrow button until

Set A appears, and then press

7 From the printed sheet, find the straightest of the 20 lines beside the letter A.

8 Press the left arrow button or the right arrow button until that number is displayed, and then press

Submitting selection appears.

9 Repeat steps 6 through 8 to align sets A through L.

12 Press the down arrow button until

Exit Config Menu appears, and then press

Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Clipped images

Guides in the selected tray are set for a different paper size than what is loaded in the tray.

Move the guides in the tray to the proper positions for the size loaded.

There could be an incorrect page size selected in the driver or program.

  • Specify the correct page size in the driver or program.
  • Set the Paper Size to match the media in the tray.
Show 6 more labels / short text on this page
Example Cause Solution · 5 Press · 10 Press · 11 Press · Cause Solution · Troubleshooting
Page 185 of the Lexmark 210 user manual — Light colored line, white line, or incorrectly colored line
Page 185 · click to enlarge
Page 185

Fine horizontal lines appear on color pages

You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).

Ghost images

  • The photoconductor is not functioning properly.
  • Make sure the Paper Type setting is correct for the media that you are using.
  • Replace the photoconductor.

The paper weight or Paper Weight setting in the Paper Menu is wrong for the type of paper being used.

Make sure the Paper Type and Paper Weight settings match the type of paper that you are using.

Toner is low. Replace the toner cartridge.

Gray background

Toner darkness setting is too dark. Select a different toner darkness setting in the printer software before sending the job to print.

Toner cartridge is worn or defective. Replace the toner cartridge.

Incorrect margins

Guides in the selected tray are set for a different paper size than what is loaded in the tray.

Move the guides in the tray to the proper positions for the size loaded.

Auto size sensing is set to Off, but you loaded a different size paper in a tray. For example, you inserted A4-size paper into the selected tray but did not set the Paper Size to A4.

  • Set the Paper Size to match the paper size in the tray.
  • Specify the correct page size in Print Properties or the program.

Light colored line, white line, or incorrectly colored line

Toner cartridge is defective. Replace the color cartridge causing the line.

Lexmark 210 — Light colored line, white line, or incorrectly colored line diagram (page 185)
Fig. 110 · Light colored line, white line, or incorrectly color…

Photoconductor is defective. Replace the photoconductor.

Transfer module is defective. Replace the transfer module.

Show 5 more labels / short text on this page
Cause Solution · Cause Solution · Cause Solution · Example Cause Solution · Troubleshooting
Page 186 of the Lexmark 210 user manual — Print is too dark
Page 186 · click to enlarge
Page 186
Lexmark 210 — Paper curls badly diagram (page 186)
Fig. 111 · Paper curls badly

Printhead lenses are dirty. Clean the printhead lenses.

Paper curls badly

Paper Type and Paper Weight settings are not appropriate for the type of paper or specialty media that you are using.

Change the Paper Type and Paper Weight settings to match the paper or specialty media loaded in the printer.

Paper has been stored in a high-humidity environment. Load paper from a fresh package.

Store paper in its original wrapper until you use it.

Print irregularities

Lexmark 210 — Print irregularities diagram (page 186)
Fig. 112 · Print irregularities

Paper has absorbed moisture due to high humidity. Load paper from a fresh package into the paper

tray.

You are using paper that does not meet the printer specifications.

Make sure that the Paper Type and Paper Weight settings match the type of paper that you are using.

Avoid textured paper with rough finishes.

A toner cartridge, the transfer module, or the fuser is worn or defective.

Replace the print cartridge, the transfer module, or the fuser.

Lexmark 210 — Print irregularities diagram (page 186)
Fig. 113 · Print irregularities

Print is too dark

Printer may not have recalibrated recently. Perform Color Adjust from the Quality menu.

Toner Darkness setting is too dark, RGB Brightness setting is too dark, or RGB Contrast setting is too high.

Select a different Toner Darkness setting, RGB Brightness setting, or RGB Contrast setting from Print Properties before sending the job to print.

Toner cartridge is worn or defective. Replace the toner cartridge.

Show 5 more labels / short text on this page
Example Cause Solution · Cause Solution · Example Cause Solution · Cause Solution · Troubleshooting
Page 187 of the Lexmark 210 user manual — Repeating defects
Page 187 · click to enlarge
Page 187

Print is too light

Printer may not have recalibrated recently. Perform Color Adjust from the Quality menu.

Toner Darkness setting is too light, RGB Brightness setting is too bright, or RGB Contrast setting is too high.

  • Select a different Toner Darkness setting, RGB Brightness setting, or RGB Contrast setting from Print Properties before sending the job to print.
  • Adjust the color quality settings in the Quality menu.

You are using paper that does not meet the printer specifications.

  • Load paper from a new package.
  • Avoid textured paper with rough finishes.
  • Make sure the paper you load in the trays is not damp.
  • Make sure the Paper Type and Paper Weight settings match the type of paper that you are using.

Color Saver is On. Turn Color Saver off in the Quality menu.

Toner is low. Replace the toner cartridge.

Toner cartridge is worn or defective.

Repeating defects

Lexmark 210 — Repeating defects diagram (page 187)
Fig. 114 · Repeating defects

If marks occur repeatedly in only one color and multiple times on a page:

A toner cartridge is defective. Replace the toner cartridge if the defects occur every:

  • 33.0 mm (1.30 in.)
  • 35.3 mm (1.39 in.)

A photoconductor is defective. Replace the photoconductor if the defects occur every:

  • 28.3 mm (1.11 in.)
  • 72.4 mm (2.85 in.)

If marks occur down the page repeatedly in all colors:

The fuser is defective. Replace the fuser if the defects occur every:

  • 47.4 mm (1.87 in.)
  • 94.8 mm (3.73 in.)
  • 113.0 mm (4.45 in.)

Cause Solution · Cause Solution · Troubleshooting

Page 188 of the Lexmark 210 user manual — Streaked vertical lines
Page 188 · click to enlarge
Page 188

Skewed print

Guides in the selected tray are not in the correct position for the paper size loaded in the tray.

Move the guides in the tray to the proper positions for the size loaded.

  • Make sure that the width guide is not too far from the paper stack.
  • Make sure that the width guide is not pressing too tightly against the paper stack.
  • Make sure that the length guide is not too far from the paper stack.
  • Make sure that the length guide is not pressing too tightly against the paper stack.

You are using paper that does not meet the printer specifications.

Make sure that you are using paper that meets the printer specifications.

Solid color pages

Photoconductor is installed incorrectly. Remove and then reinstall the photoconductor.

Photoconductor is defective. Replace the photoconductor.

Printer requires servicing. Call for service.

Streaked horizontal lines

Lexmark 210 — Streaked horizontal lines diagram (page 188)
Fig. 115 · Streaked horizontal lines

A toner cartridge is defective, empty, or worn.

Replace the toner cartridge.

Fuser is defective or worn. Replace the fuser.

Photoconductor may be defective. Replace the defective photoconductor.

Streaked vertical lines

Lexmark 210 — Streaked vertical lines diagram (page 188)
Fig. 116 · Streaked vertical lines

Toner is smeared before fusing to the paper.

If paper is stiff, try feeding from another tray.

Toner cartridge is defective. Replace the toner cartridge causing the streaks.

Transfer module is worn or defective. Replace the transfer module.

Show 5 more labels / short text on this page
Cause Solution · Cause Solution · Example Cause Solution · Example Cause Solution · Troubleshooting
Page 189 of the Lexmark 210 user manual — Transparency print quality is poor
Page 189 · click to enlarge
Page 189

Toner fog or background shading appears on the page

Toner cartridge is defective or installed incorrectly. Reinstall or replace the cartridge.

Transfer module is worn or defective. Replace the transfer module.

Photoconductor is worn or defective. Replace the photoconductor.

Fuser is worn or defective. Replace the fuser.

Toner is in the paper path. Call for service.

Printer may not have recalibrated recently. Perform color adjust from the Quality menu.

Application may specify off-white background. Check the application.

Toner rubs off

Specialty media is being used. Make sure the correct Paper Type is selected.

The Paper Weight setting in the Paper Menu is wrong for the type of paper being used.

Change the Paper Weight from Normal to Heavy. If necessary, change Paper Texture from Normal to Rough.

Fuser is worn or defective. Replace the fuser.

Toner specks

Toner cartridges are worn or defective. Replace the defective or worn cartridges.

Toner is in the paper path. Call for service.

The photoconductor may be defective. Replace the defective photoconductor.

Transparency print quality is poor

You are using transparencies that do not meet the printer specifications.

Use only transparencies recommended by the printer manufacturer.

Paper Type setting for the tray you are using is set to something other than Transparency.

Make sure the Paper Type setting is set to Transparency.

Show 5 more labels / short text on this page
Cause Solution · Cause Solution · Cause Solution · Cause Solution · Troubleshooting
Page 190 of the Lexmark 210 user manual — FAQ about color printing
Page 190 · click to enlarge
Page 190

Uneven print density

Toner cartridge is worn or defective.

Replace the toner cartridge.

Lexmark 210 — Uneven print density diagram (page 190)
Fig. 117 · Uneven print density

Photoconductor is worn or defective.

Replace the photoconductor.

Solving color quality problems

This section helps answer some basic color-related questions and describes how some of the features provided in the Quality Menu can be used to solve typical color problems.

FAQ about color printing

What is RGB color?

Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.

What is CMYK color?

Cyan, magenta, yellow, and black (known as CMYK color) inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.

How is color specified in a document to be printed?

Software applications typically specify document color using RGB or CMYK color combinations. Additionally, they commonly let you modify the color of each object in a document. For more information, see the software application Help section.

How does the printer know what color to print?

When you print a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object type information lets different color conversion tables be used for different types of objects. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

Should I use PostScript or PCL emulation printer software? What settings should I use for the best color?

The PostScript driver is strongly recommended for best color quality. The default settings in the PostScript driver provide preferred color quality for the majority of printouts.

Example Cause Solution · Troubleshooting

Page 191 of the Lexmark 210 user manual — Uneven print density
Page 191 · click to enlarge
Page 191

Why doesn't the printed color match the color that I see on the computer screen?

The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color-matching problems, see the question, “How can I match a particular color (such as a color in a corporate logo)?”

The printed page appears tinted. Can I slightly adjust the color?

Sometimes you may consider printed pages to appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjusting the Color Balance setting may create more preferable color. Color Balance lets you make subtle adjustments to the amount of toner being used in each color plane. Selecting positive (or negative) values for cyan, magenta, yellow, and black under the Color Balance menu will slightly increase (or decrease) the amount of toner used for the chosen color. For example, if you believe the overall printed page to be too red, then decreasing both magenta and yellow could potentially improve color.

My color transparencies seem dark when being projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency.

Make sure to print on the recommended type of color transparencies. For more information about the paper and media specifications, see the User's Guide on the Software and Documentation CD.

What is manual color correction?

The color conversion tables applied to each object when using the default Auto Color Correction setting generate preferred color for the majority of documents. Occasionally, you may want to apply a different color table mapping. This customization is accomplished using the Manual Color menu and the Manual Color Correction setting.

Manual Color Correction applies to RGB and CMYK color conversion table mappings as defined in the Manual Color menu.

You can select any of the different color conversion tables for RGB or CMYK:

Color conversion table Settings

  • RGB
  • sRGB Display
  • Display–True Black
  • sRGB Vivid
  • Vivid
  • Off
  • CMYK
  • US CMYK
  • Euro CMYK
  • Vivid CMYK
  • Off

Troubleshooting

Page 192 of the Lexmark 210 user manual — Uneven print density
Page 192 · click to enlarge
Page 192

How can I match a particular color (such as a corporate logo)?

Occasionally, you may have a need for the printed color of a particular object to closely match a specific color. For example, you may need to match the color of a corporate logo. While instances can occur in which the printer cannot exactly reproduce the desired color, you should be able to identify adequate color matches for the majority of cases.

The Color Samples menu item can provide useful information in helping solve this particular type of color-matching problem. The nine Color Samples values correspond to color conversion tables in the printer. Selecting any of the Color Samples values generates a multiple-page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

You can examine the color samples pages and identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software application. For instructions, see the software application Help. Manual Color Correction may be necessary to utilize the selected color conversion table for the particular object.

Selecting which Color Samples pages to use for a particular color-matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software application (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; no color conversion is implemented.

Note: The Color Samples pages are not useful if the software application does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist where the software application or the computer operating system adjusts the RGB or CMYK combinations specified in the application through color management. The resulting printed color may not be an exact match of the Color Samples pages.

The following table can help identify which Color Sample pages to use for color matching.

Color specification and object to be printed

Color Correction setting Sample pages to use

RGB—Text Auto sRGB Vivid

Manual Manual Color RGB Text Setting

RGB—Graphic Auto sRGB Vivid

Manual Manual Color RGB Graphic Setting

RGB—Image Auto sRGB Display

Manual Manual Color RGB Image Setting

CMYK—Text Auto US CMYK or Euro CMYK

Manual Manual Color CMYK Text Setting

CMYK—Graphic Auto US CMYK

Manual Manual Color CMYK Graphic Setting

CMYK—Image Auto US CMYK

Manual Manual Color CMYK Image Setting

Troubleshooting

Page 193 of the Lexmark 210 user manual — Contacting Customer Support
Page 193 · click to enlarge
Page 193

What are Detailed Color Samples and how do I access them?

These pages require the use of the Embedded Web Server. The Embedded Web Server is a series of resident pages stored in the network printer firmware. To access these pages, browse to the IP address of the network printer. Click Configuration Menu, and then click Detailed Color Samples.

For more information about using the Embedded Web Server, see the User's Guide on the Software and Documentation CD.

Detailed Color Samples are pages similar to the default pages of color samples accessible from the Quality menu using the printer control panel. The default color samples available using this method have an increment value of 10% for red, green, and blue. If you find a value on this page that is close, but would like to scan more colors in a nearby area, then you can use the Detailed Color Samples to select the desired color values and a more specific increment. This provides a way to print multiple pages of colored boxes that surround a specific color of interest.

There are nine conversion tables available with the following three options:

  • Print —Prints the default pages
  • Detailed —Lets you enter individual red, green, and blue values and a specific increment of color
  • Reset —Lets you clear the existing information and enter new values

The process can be duplicated for Cyan (C), Magenta (M), Yellow (Y), and Black (K) color conversion tables, too. Collectively, these values are known as CMYK color. The default increment is 10% for Black and 20% each for Cyan, Magenta, and Yellow.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:

C HECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and connected to the same network.

C HECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.

Contacting Customer Support

When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at www.lexmark.com.

Troubleshooting

Page 194 of the Lexmark 210 user manual — Edition notice
Page 194 · click to enlarge
Page 194

Notices

Product information

Product name:

Lexmark C734n, C734dn, C734dtn, C734dw, C736n, C736dn, C736dtn

Machine type:

Model(s):

210, 230, 280, 410, 430, 480

Machine type:

n01, n02, n03, gn1, gn2, dn1, dn2, dn3, gd1, gd2, dw1, dw2, gw1, gw2

Machine type:

n01, n02, n03, gn1, gn2, dn1, dn2, dn3, gd1, gd2

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

May 2009

Page 195 of the Lexmark 210 user manual — Trademarks
Page 195 · click to enlarge
Page 195

If you don't have access to the Internet, you can contact Lexmark by mail:

Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA

© 2009 Lexmark International, Inc.

All rights reserved.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Trademarks

Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

MarkTrack, PrintCryption, and StapleSmart are trademarks of Lexmark International, Inc.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

The following terms are trademarks or registered trademarks of these companies:

Albertus The Monotype Corporation plc

Antique Olive Monsieur Marcel OLIVE

Apple-Chancery Apple Computer, Inc.

Arial The Monotype Corporation plc

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Chicago Apple Computer, Inc.

Clarendon Linotype-Hell AG and/or its subsidiaries

Geneva Apple Computer, Inc.

GillSans The Monotype Corporation plc

Helvetica Linotype-Hell AG and/or its subsidiaries

Hoefler Jonathan Hoefler Type Foundry

ITC Avant Garde Gothic International Typeface Corporation

ITC Bookman International Typeface Corporation

ITC Mona Lisa International Typeface Corporation

Eurostile Nebiolo

Page 196 of the Lexmark 210 user manual — Federal Communications Commission (FCC) compliance information statement
Page 196 · click to enlarge
Page 196

ITC Zapf Chancery International Typeface Corporation

Joanna The Monotype Corporation plc

Monaco Apple Computer, Inc.

New York Apple Computer, Inc.

Palatino Linotype-Hell AG and/or its subsidiaries

Stempel Garamond Linotype-Hell AG and/or its subsidiaries

Times New Roman The Monotype Corporation plc

Univers Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Marigold Arthur Baker · Oxford Arthur Baker · Taffy Agfa Corporation

Page 197 of the Lexmark 210 user manual — Product disposal
Page 197 · click to enlarge
Page 197

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Temperature information

Ambient temperature 15–32° C (60–90° F)

Shipping temperature -40–60° C (-40–140° F)

Storage temperature 1–60° C (34–140° F)

Waste from Electrical and Electronic Equipment (WEEE) directive

Lexmark 210 — Waste from Electrical and Electronic Equipment (WEEE) directive diagram (page 197)
Fig. 118 · Waste from Electrical and Electronic Equipment (WEEE…

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Printing 55 · Ready 33

Page 198 of the Lexmark 210 user manual — N/A
Page 198 · click to enlarge
Page 198

Battery notice

This product contains Perchlorate material. Special handling may apply. For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.

ENERGY STAR

Lexmark 210 — ENERGY STAR diagram (page 198)
Fig. 119

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is a maximum 15 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard-copy output from electronic inputs. 490, 530

Copying The product is generating hard-copy output from hard-copy original documents.

N/A

Scanning The product is scanning hard-copy documents. N/A

Ready The product is waiting for a print job. 45

Power Saver The product is in energy-saving mode. 16

Off The product is plugged into a wall outlet, but the power switch is turned off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Page 199 of the Lexmark 210 user manual — European Community (EC) directives conformity
Page 199 · click to enlarge
Page 199

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Factory default Power Saver Timeout for this product (in minutes): 30

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Lexmark 210 — Laser advisory label diagram (page 199)
Fig. 120 · Laser advisory label

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, Inc., S.A., Boigny, France.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Page 200 of the Lexmark 210 user manual — Notice to Users in the European Union
Page 200 · click to enlarge
Page 200

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Radio interference notice

This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

CCC EMC notice

Lexmark 210 — CCC EMC notice diagram (page 200)
Fig. 121 · CCC EMC notice

BSMI notice

Lexmark 210 — BSMI notice diagram (page 200)
Fig. 122 · BSMI notice

15.6 to 32.2° C (60 to 90° F)

-40° to 40° C (104° F)

Notice to Users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Page 201 of the Lexmark 210 user manual — Industry Canada (Canada)
Page 201 · click to enlarge
Page 201

Compliance is indicated by the CE marking.

A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France.

Refer to the table at the end of the Notices section for further compliance information.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Notice to users in Brazil

Este equipamento opera em carater secundario, isto e, nao tem direito a protecao contra interferencia prejudicial, mesmo de estacoes do mesmo tipo, e nao pode causar interferencia a sistemas operando em carater primario. (Res.ANATEL 282/2001).

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Page 203 of the Lexmark 210 user manual — Notice to users in the European Union
Page 203 · click to enlarge
Page 203

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France. Refer to the table at the end of the Notices section for further compliance information.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France. Refer to the table at the end of the Notices section for further compliance information.

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Page 204 of the Lexmark 210 user manual — Lexmark International, Inc., Lexington, KY
Page 204 · click to enlarge
Page 204

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de

essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Statement of Limited Warranty

Lexmark C734n, C734dn, C734dtn, C734dw, C736n, C736dn, C736dtn

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Page 205 of the Lexmark 210 user manual — Extent of limited warranty
Page 205 · click to enlarge
Page 205

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at www.lexmark.com/support.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

Page 206 of the Lexmark 210 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS
Page 206 · click to enlarge
Page 206

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.

Page 207 of the Lexmark 210 user manual — LEXMARK SOFTWARE LICENSE AGREEMENT
Page 207 · click to enlarge
Page 207

DEVICE LICENSE AGREEMENT

The patented printer is licensed for, and designed to work with only genuine Lexmark toner cartridges and developer components for the life of the patented printer. Under this patent license, you agree to: (1) use only genuine Lexmark toner cartridges and developer components with this printer except as otherwise provided below, and (2) pass this license/agreement to any subsequent user of this printer. The patented Lexmark toner cartridges and developer components inside are licensed subject to a restriction that they may be used only once. Following their initial use, you agree to return them only to Lexmark for recycling. Lexmark toner cartridges are designed to stop working after a delivering a fixed amount of toner. A variable amount of toner may remain in them when replacement is required. Replacement toner cartridge(s) sold without these terms are available through www.lexmark.com may be refilled by you, or a third party, as the only cartridge alternative to be used with the licensed printer.

LEXMARK SOFTWARE LICENSE AGREEMENT

This Software License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRATIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.

This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.

The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages.

Page 208 of the Lexmark 210 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS
Page 208 · click to enlarge
Page 208

3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.

IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENCE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this Software License Agreement:

a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,

executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or

installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this Software License Agreement. d Freeware. Notwithstanding the terms and conditions of this Software License Agreement, all or any portion

of the Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download or installation. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license.

Page 209 of the Lexmark 210 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS
Page 209 · click to enlarge
Page 209

6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this Software License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these Software License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this Software License Agreement. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program or assist or otherwise facilitate others to do so, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program. 9 ADDITIONAL SOFTWARE. This Software License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This Software License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this Software License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Software License Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Software License Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Software License Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program are as set forth in this Software License Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation.

Page 210 of the Lexmark 210 user manual — MICROSOFT CORPORATION NOTICES
Page 210 · click to enlarge
Page 210

17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this Software License Agreement electronically. This means that when you click the “Agree” or “I accept” button on this page or use this product, you acknowledge your agreement to these Software License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this Software License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This Software License Agreement (including any addendum or amendment to this Software License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this Software License Agreement (except to the extent such extraneous terms do not conflict with the terms of this Software License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this Software License Agreement, the terms of this Software License Agreement shall control.

MICROSOFT CORPORATION NOTICES

1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.om/fwlink/?LinkId=52369. 2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fwlink/?LinkId=83288.

Page 212 of the Lexmark 210 user manual — Table of contents
Page 212 · click to enlarge
Page 212

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Taiwan NCC RF notice statementp.202India emissions noticep.202Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 213 of the Lexmark 210 user manual — Table of contents
Page 213 · click to enlarge
Page 213

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Taiwan NCC RF notice statementp.202India emissions noticep.202Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 214 of the Lexmark 210 user manual — Table of contents
Page 214 · click to enlarge
Page 214

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Taiwan NCC RF notice statementp.202India emissions noticep.202Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 215 of the Lexmark 210 user manual — Table of contents
Page 215 · click to enlarge
Page 215

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Taiwan NCC RF notice statementp.202India emissions noticep.202Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 216 of the Lexmark 210 user manual — Table of contents
Page 216 · click to enlarge
Page 216

Table of contents

Contentsp.2Safety informationp.9Learning about the printerp.11Finding information about the printerp.11Selecting a location for the printerp.12Printer configurationsp.13Using the security lock featurep.15Understanding the printer control panelp.15Additional printer setupp.17Installing internal optionsp.17Available internal optionsp.17Accessing the system board to install internal optionsp.18Installing a memory cardp.19Installing a flash memory or firmware cardp.21Installing an Internal Solutions Portp.23Installing a printer hard diskp.29Reattaching the system board coverp.32Attaching cablesp.33Installing optional traysp.35Verifying printer setupp.37Printing a menu settings pagep.37Printing a network setup pagep.37Setting up the printer softwarep.37Installing printer softwarep.37Updating available options in the printer driverp.38Setting up wireless printingp.39Information you will need to set up the printer on a wireless networkp.39Installing the printer on a wireless network (Windows)p.40Installing the printer on a wireless network (Macintosh)p.41Installing the printer on a wired networkp.44Changing port settings after installing a new network Internal Solutions Portp.46Setting up serial printingp.48Minimizing your printer's environmental impactp.50Saving paper and tonerp.50Using recycled paperp.50Conserving suppliesp.50Saving energyp.51Using Eco-Modep.51Reducing printer noisep.52Adjusting Power Saverp.52Adjusting the brightness of the displayp.53Recyclingp.54Recycling Lexmark productsp.54Recycling Lexmark packagingp.54Returning Lexmark cartridges for reuse or recyclingp.54Loading paper and specialty mediap.55Setting the paper size and typep.55Loading the paper trayp.55Loading the multipurpose trayp.58Linking and unlinking traysp.61Linking traysp.61Unlinking traysp.61Paper and specialty media guidep.63Paper guidelinesp.63Paper characteristicsp.63Unacceptable paperp.64Selecting paperp.64Selecting preprinted forms and letterheadp.64Using recycled paper and other office papersp.65Storing paperp.65Supported paper sizes, types, and weightsp.66Supported paper sizesp.66Supported paper types and weightsp.67Printingp.69Printing a documentp.69Printing a documentp.69Printing specialty documentsp.69Printing on letterheadp.69Tips on using transparenciesp.70Tips on using envelopesp.71Tips on using labelsp.71Tips on using card stockp.72Printing confidential and other held jobsp.72Holding jobs in the printerp.72Printing confidential and other held jobsp.73Printing from a flash drivep.75Printing photos from a PictBridge-enabled digital camerap.76Printing information pagesp.76Printing a font sample listp.76Printing a directory listp.77Printing the print quality test pagesp.77Canceling a print jobp.77Canceling a print job from the printer control panelp.77Canceling a print job from the computerp.77Printing in black and whitep.78Using Max Speed and Max Yieldp.79Clearing jamsp.80Avoiding jamsp.80Understanding jam messagesp.80200 paper jamsp.81200 or 201 paper jamp.82201 paper jamp.83202 paper jamp.84203 paper jamp.86230 paper jamp.87240 paper jamp.88250 paper jamp.90Understanding printer menusp.91Menus listp.91Supplies menup.92Paper menup.93Default Source menup.93Paper Size/Type menup.93Configure MP menup.96Substitute Size menup.96Paper Texture menup.97Paper Weight menup.98Paper Loading menup.100Custom Types menup.101Universal Setup menup.101Reports menup.102Reports menup.102Network/Ports menup.103Active NIC menup.103Standard Network or Network <x> menusp.103Network Reports menup.105Network Card menup.106TCP/IP menup.106IPv6 menup.107Wireless menup.108AppleTalk menup.108NetWare menup.109LexLink menup.110Standard USB and USB <x> menusp.110Parallel <x> menup.112Serial <x> menup.114SMTP Setup menup.116Security menup.117Miscellaneous menup.117Confidential Print menup.118Disk Wiping menup.119Security Audit Log menup.120Set Date/Time menup.121Settings menup.121General Settings menup.121Setup menup.125Finishing menup.127Quality menup.128Utilities menup.132XPS menup.133PDF menup.133PostScript menup.133PCL Emul menup.134HTML menup.137Image menup.138PictBridge menup.139Flash Drive menup.139Help menup.141Understanding printer messagesp.143List of status and error messagesp.143Activating Menu Changesp.143Busyp.143Calibratingp.143Cancel not availablep.143Cancelingp.143Change <src> to <x>p.143Clearing job accounting statisticsp.143Close door <x>p.143Copiesp.144Defragmenting Flash DO NOT POWER OFFp.144Delete/Delete all/Delete all confidential jobsp.144Deletingp.144Disabling DLEsp.144Disabling Menusp.144Disk Corrupted. Reformat?p.144Disk recovery x/y XX% DO NOT POWER OFFp.144Enabling Menusp.144Encrypting disk x/y XX% DO NOT POWER OFFp.144Enter PINp.145Enter PIN to lockp.145Flushing bufferp.145Formatting Disk x/y XX% DO NOT POWER OFFp.145Formatting Flash DO NOT POWER OFFp.145Insert Tray <x>p.145Internal System Error, Reload Bookmarksp.145Internal System Error, Reload Security Certificatesp.145Invalid Engine Codep.145Invalid Network Codep.146Invalid PINp.146Load multipurpose tray with <x>p.146Load <src> with <x>p.146Menus are disabledp.146Network/Network <x>p.146No held jobsp.146No jobs to cancelp.146Power Saverp.147Printer locked, enter PIN to unlockp.147Printingp.147Programming disk DO NOT POWER OFFp.147Programming flash DO NOT POWER OFFp.147Programming System Code DO NOT POWER OFFp.147Reading USB drive DO NOT REMOVEp.147Readyp.147Remote Management Active DO NOT POWER OFFp.147Remove all color suppliesp.148Remove Packaging Materialsp.148Remove paper from standard binp.148Resetting Fuser Countp.148Resetting the printerp.148Restore Held Jobs?p.148Restoring Factory Defaultsp.148Restoring Held Job(s) x/yp.149Serial <x>p.149Some held jobs were not restoredp.149Some held jobs will not be restoredp.149Standard Bin Fullp.149Submitting Selectionp.149Tray <x> Emptyp.149Tray <x> Lowp.149Tray <x> Missingp.149USB/USB <x>p.149Waitingp.15031 Missing or defective <color> cartridgep.15032 Replace unsupported <color> cartridgep.15034 Incorrect paper type, check <src>p.15034 Incorrect paper size, check <src>p.15034 Short paperp.15035 Insufficient memory to support Resource Save featurep.15137 Insufficient memory for Flash Memory Defragment operationp.15137 Insufficient memory to collate jobp.15137 Insufficient memory, some held jobs will not be restoredp.15138 Memory fullp.15139 Page is too complex to printp.15151 Defective flash detectedp.15152 Flash fullp.15253 Unformatted flash detectedp.15254 Network <x> software errorp.15254 Serial option <x> errorp.15254 Standard network software errorp.15255 Unsupported option in slot <x>p.15256 Parallel port <x> disabledp.15256 Serial port <x> disabledp.15356 Standard USB port disabledp.15356 USB port <x> disabledp.15357 Configuration change, held jobs were not restoredp.15358 Too many flash options installedp.15358 Too many trays attachedp.15361 Remove defective hard diskp.15362 Disk fullp.15463 Unformatted diskp.15480 Fuser life warningp.15480 Replace fuserp.15482 Replace waste toner boxp.15482 Waste toner box missingp.15482 Waste toner box nearly fullp.15483 Replace transfer modulep.15483 Transfer module life warningp.15583 Transfer module missingp.15584 <color> photoconductor lowp.15584 <color> photoconductor nearly lowp.15584 Replace <color> photoconductorp.15588 <color> cartridge lowp.15588 <color> cartridge nearly lowp.15588 Replace <color> cartridgep.155200–250.yy Paper jamp.156900–999 Service <message>p.1561565 Emul Error Load Emul Optionp.156Maintaining the printerp.157Cleaning the exterior of the printerp.157Cleaning the printhead lensesp.157Storing suppliesp.159Checking the status of suppliesp.159Checking the status of supplies from the printer control panelp.159Checking the status of supplies from a network computerp.160Ordering suppliesp.160Ordering toner cartridgesp.160Ordering photoconductorsp.160Ordering a fuser or a transfer modulep.160Ordering a waste toner boxp.161Replacing Suppliesp.162Replacing a photoconductorp.162Replacing a toner cartridgep.165Replacing the waste toner boxp.169Moving the printerp.170Before moving the printerp.170Moving the printer to another locationp.171Setting the printer up in a new locationp.171Shipping the printerp.172Administrative supportp.173Finding advanced networking and administrator informationp.173Using the Embedded Web Serverp.173Checking the virtual displayp.173Checking the device statusp.174Setting up e-mail alertsp.174Viewing reportsp.174Restoring the factory default settingsp.175Troubleshootingp.176Checking an unresponsive printerp.176Solving printing problemsp.176Multiple-language PDFs do not printp.176Printer control panel display is blank or displays only diamondsp.176Error message about reading USB drive appearsp.176Jobs do not printp.176Confidential and other held jobs do not printp.177Job takes longer than expected to printp.178Job prints from the wrong tray or on the wrong paperp.178Incorrect characters printp.178Tray linking does not workp.178Large jobs do not collatep.179Unexpected page breaks occurp.179Solving option problemsp.179Option does not operate correctly or quits after it is installedp.179Trays / Drawersp.180Flash memory cardp.180Hard disk with adapterp.180Internal Solutions Portp.181Internal print serverp.181Memory cardp.181USB/parallel interface cardp.181Solving paper feed problemsp.182Paper frequently jamsp.182Paper jam message remains after jam is clearedp.182Page that jammed does not reprint after you clear the jamp.182Solving print quality problemsp.183Isolating print quality problemsp.183Blank pagesp.183Characters have jagged or uneven edgesp.183Color misregistrationp.184Clipped imagesp.184Fine horizontal lines appear on color pagesp.185Ghost imagesp.185Gray backgroundp.185Incorrect marginsp.185Light colored line, white line, or incorrectly colored linep.185Paper curls badlyp.186Print irregularitiesp.186Print is too darkp.186Print is too lightp.187Repeating defectsp.187Skewed printp.188Solid color pagesp.188Streaked horizontal linesp.188Streaked vertical linesp.188Toner fog or background shading appears on the pagep.189Toner rubs offp.189Toner specksp.189Transparency print quality is poorp.189Uneven print densityp.190Solving color quality problemsp.190FAQ about color printingp.190Embedded Web Server does not openp.193Check the network connectionsp.193Check the network settingsp.193Contacting Customer Supportp.193Noticesp.194Product informationp.194Edition noticep.194UNITED STATES GOVERNMENT RIGHTSp.195Trademarksp.195Federal Communications Commission (FCC) compliance information statementp.196Noise emission levelsp.197Temperature informationp.197Waste from Electrical and Electronic Equipment (WEEE) directivep.197Product disposalp.197Battery noticep.198ENERGY STARp.198Laser noticep.198Power consumptionp.198Product power consumptionp.198Power Saverp.199Off modep.199Total energy usagep.199Laser advisory labelp.199European Community (EC) directives conformityp.199Radio interference noticep.200CCC EMC noticep.200BSMI noticep.200Notice to Users in the European Unionp.200Regulatory notices for wireless productsp.201Exposure to radio frequency radiationp.201Notice to users in Brazilp.201Industry Canada (Canada)p.201Taiwan NCC RF notice statementp.202India emissions noticep.202Notice to users in the European Unionp.203Statement of Limited Warrantyp.204LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTSp.206Indexp.211
Page 217 of the Lexmark 210 user manual — X XPS menu 133
Page 217 · click to enlarge
Page 217

X XPS menu 133

Index

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 210

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 210

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 210 manual PDF

217 pages·2.8 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…