Instruction/ maintenance manual of the product 16M1842 Lexmark
Go to page of 8
Lexmark™ X65x Quick Reference Loading paper and specialty media Loading the standard or optional 250-sheet or 550-sheet tray Although the 250-sheet tray and the 550-sheet tray are different in appearance, they require the same process for loading paper.
5 Load the paper stack: • Print side facedown for single-sided printing • Print side faceup for duplex printing Note: Paper must be loaded differently in the trays if an optional StapleSmart TM II Finisher is installed. For more information, see the User's Guide .
4 Push the length guide release latch to raise the length guide, slide the guide to the correct position for the paper size being loaded, and then lock the guide. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper.
3 Slide the width guide to the far right. 4 Flex the sheets of paper or specialty media back and forth to loosen them, and then fan them. Do not fold or crease them. Straighten the edges on a level surface. 5 Load the paper or specialty media. Slide the stack gently into the multipurpose feeder until it comes to a stop.
Copying a document that contains mixed paper sizes Use the ADF to copy an original document that contains mixed paper sizes. Depending on the paper sizes loaded and the “Copy to” and “Copy from” settings, each copy is either printed on mixed paper sizes (Example 1) or scaled to fit a single paper size (Example 2).
Faxing Sending a fax using the printer control panel 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF.
4 Select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user name. For a confidential job, also enter a four-digit PIN. 5 Click OK or Print , and then go to the printer to release the job. 6 On the home screen, touch Held jobs .
4 Wipe only the outside of the printer, making sure to include the standard exit bin. Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer. 5 Make sure the paper support and standard exit bin are dry before beginning a new print job.
An important point after buying a device Lexmark 16M1842 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lexmark 16M1842 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lexmark 16M1842 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lexmark 16M1842 you will learn all the available features of the product, as well as information on its operation. The information that you get Lexmark 16M1842 will certainly help you make a decision on the purchase.
If you already are a holder of Lexmark 16M1842, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lexmark 16M1842.
However, one of the most important roles played by the user manual is to help in solving problems with Lexmark 16M1842. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lexmark 16M1842 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
