
User's Guide
Machine type: 7525 Model numbers: 131, 133, 138, 332, 333, 336, 337, 352, 356, 382, 383, 386, 387


Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.
Use care when you replace a lithium battery.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Use only the telecommunications (RJ‑11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.
Safety information 10

Refer service or repairs, other than those described in the user documentation, to a professional service person.
SAVE THESE INSTRUCTIONS.
Safety information 11

Learning about the printer 12
Finding information about the printer

Learning about the printer 13
What are you looking for? Find it here
The latest supplemental information, updates, and customer support:
Lexmark Support Web site— http://support.lexmark.com
Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer.
Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster:
Warranty information Warranty information varies by country or region:
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

Learning about the printer 14

1 102 mm (4 in.)
2 508 mm (20 in.)
3 152 mm (6 in.)
4 76 mm (3 in.)
5 254 mm (10 in.)

Learning about the printer 15


8 650-sheet duo drawer with integrated multipurpose feeder (Tray 2)
The scanner provides copy, fax, and scan-to-network capability for workgroups. You can:

Learning about the printer 16

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
You can use the ADF or the scanner glass to scan documents.
The ADF can scan multiple pages including duplex (two‑sided) pages. When using the ADF:
The scanner glass can be used to scan or copy single pages or book pages. When using the scanner glass:

Learning about the printer 17

Select a function such as Copy, Scan, Email, or Fax. Change default copy and scan settings such as the number of copies, duplex printing, copy options, and scaling. Use the address book when scanning to e‑mail.
2 Display area View scanning, copying, faxing, and printing options as well as status and error messages. Access the administration menus, start, stop, or cancel a print job.
3 Keypad area Enter numbers, letters, or symbols on the display, print using the USB flash memory device, or change the default fax settings.


1 Copy Press the Copy button to enter the copy function.
2 Content Press the Content button to enhance copy, scan, e‑mail, or fax quality. Choose from Text, Text/Photo, or Photo.
3 Copies Press the Copies button to enter the number of copies to print.

Learning about the printer 18
4 Scale Press the Scale button to change the size of the copied document to fit onto the currently selected paper size.
5 Options Press the Options button to change Original Size, Paper Source, Paper Saver, and Collate settings.
6 Address Book Press to enter the address book.
7 Darkness Press the Darkness button to adjust the current darkness settings.
8 Duplex 2-Sided Press the Duplex 2‑Sided button to scan or print on both sides of the paper.
9 Fax Press the Fax button to enter the fax function.
10 Scan/Email Press the Scan/Email button to enter the scan or scan to e‑mail function.

5 7 9 10 6 8
Item Description

Learning about the printer 19
1 Menu Press to enter the administration menus.
2 Display View scanning, copying, faxing, and printing options as well as status and error messages
3 Stop/Cancel Press to stop all printer activity.
4 Color start Press to copy or scan in color.
5 Black start Press to copy or scan in black and white.
6 Right arrow Press to scroll right.
7 Select Press to accept menu selections and settings.
8 Left arrow Press to scroll left.
9 Indicator light Indicates the printer status:
Item Description

Learning about the printer 20

10 Back Press to return one screen at a time to the Ready screen.



Learning about the printer 21
3 Front USB port Lets you scan to a flash drive or print supported file types
Press # to enter the shortcut screen.
5 Hook Press to take the line off‑hook (like picking up a phone receiver). Press a second time to hang up the line.
6 Options Press the Options button to change Original Size, Broadcast, Delayed Send, and Cancel settings.
7 Resolution Press the Resolution button to select a dpi value for the scan.
Item Description · 4 Shortcuts

Additional printer setup 22
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal.

Additional printer setup 23
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board at the back of the printer.
2 Turn the screws counterclockwise to remove them.

3 Gently pull the cover away from the printer, and then remove it.


Additional printer setup 24
4 Locate the appropriate connector on the system board.


Additional printer setup 25
The system board has one connector for an optional memory card.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.

2 Open both latches on the connector completely.


Additional printer setup 26
3 Unpack the memory card.
4 Align the notch on the memory card with the ridge on the connector.
5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card.

6 Reinstall the system board access cover.

1 Notch · 2 Ridge

Additional printer setup 27
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Access the system board.

2 Unpack the memory card.
3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. This ensures the metal pins line up correctly as well.


Additional printer setup 28
4 Push the card firmly into place.

5 Reinstall the system board cover.

1 Plastic pins · 2 Metal pins

Additional printer setup 29
The printer supports two additional input sources: an optional 550‑sheet tray and a 650‑sheet duo drawer (Tray 2) with an integrated multipurpose feeder.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
1 Unpack the optional 550‑sheet tray, and then remove all packing material and the dust cover.
2 Place the tray in the location chosen for the printer.
3 Align a 650‑sheet duo drawer with the optional 550‑sheet tray, and then lower it into place.


Additional printer setup 30
4 Align the printer with the 650‑sheet duo drawer, and then lower the printer into place.

5 Install the dust covers.
2 Connect the power cord to the printer first and then to a wall outlet.

Additional printer setup 31



Additional printer setup 32
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:
Print menu settings pages to review the current menu settings and to verify printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. To restore the factory default settings, see “Restoring the factory default settings” on page 206.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Menu Settings Page appears, and then press .
After the menu settings pages print, Ready appears.
If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Network Setup Page appears, and then press .
After the network setup page prints, Ready appears.
5 Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Additional printer setup 33
2 Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK.
or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.
c Press Enter, or click OK.
Click the CD icon on the desktop.
3 Click Install, and then follow the instructions on the computer screen.
When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.
1 Open the printers folder.
a Click

Additional printer setup 34
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.
c Press Enter, or click OK.
4 Click the Configuration tab.
6 Click Apply.
2 Add any installed hardware options, and then click OK.
Make sure you have the following information before setting up the printer on a wireless network:
In Windows 8 · a Click

Additional printer setup 35
Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key
If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase
WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS
If you are installing the printer on an 802.1X network, then you may need the following:
If your wireless network does not use any type of security, then you will not have any security information.
– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility
of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that
came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.
Before installing the printer on a wireless network, make sure:
1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Additional printer setup 36

1@!.
2 ABC
3 DEF
PQRS 7
5 JKL
8 TUV
9 WXYZ
6 MNO
3 Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK
or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.
c Press Enter or click OK.
4 Click Install, and then follow the instructions on the computer screen.
5 Select Wireless connection when asked to choose a connection type.
6 From the Wireless Configuration dialog, select Guided Setup (Recommended).
* · # · a Click

Additional printer setup 37
7 Temporarily connect a USB cable between the computer on the wireless network and the printer.
8 Follow the instructions on the computer screen.
1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

1@!.
5 JKL
2 ABC
3 DEF
PQRS 7
8 TUV
9 WXYZ
6 MNO
2 Locate the printer MAC address. a From the printer control panel, navigate to:
> Reports > > Network Setup Page > or
> Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC).
1 Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to either of the following:
* · #

Additional printer setup 38
In Mac OS X version 10.4
From the Finder, navigate to:
Applications > Internet Connect > AirPort
2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y’s are the last six digits of the MAC address located on the MAC address sheet.
3 Open a Web browser.
4 From the Bookmarks menu, select Show or Show All Bookmarks.
5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.
6 From the Embedded Web Server, navigate to the location of the wireless settings information.
1 Type the network name (SSID) in the appropriate field.
2 Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).
3 Select the type of security you want to use to protect the wireless network.
4 Enter the security information necessary for the printer to connect to the wireless network.
5 Click Submit.
6 Open the AirPort application on the computer:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to either of the following:
In Mac OS X version 10.4
From the Finder, navigate to:
Applications > Internet Connect > AirPort
7 From the Network pop‑up menu, select the name of the wireless network.
To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.
1 Install a printer driver file on the computer: a Obtain a copy of the software installer package.
c Follow the instructions on the computer screen.

Additional printer setup 39
d Select a destination, and then click Continue. e From the Easy Install screen, click Install.
f Type the user password, and then click OK. All necessary applications are installed in the computer. g Click Close when the installation is complete.
In Mac OS X version 10.5 or later
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, choose Add, and then click IP Printer. 4 Type the IP address of the printer in the address field, and then click Add. b For AppleTalk printing:
In Mac OS X version 10.5
1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add
In Mac OS X version 10.4
1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.

Additional printer setup 40
2 Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK
or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.
c Press Enter or click OK.
3 Click Install, and then follow the instructions on the computer screen.
4 Select Ethernet connection, and then click Continue.
5 Attach the Ethernet cable when instructed to do so.
6 Select the printer from the list, and then click Continue.
7 Follow the instructions on the computer screen.
1 Allow the network DHCP server to assign an IP address to the printer.
a Click

Additional printer setup 41
3 Install the printer driver on the computer. a Double‑click the installer package for the printer. b Follow the instructions on the computer screen.
c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.
All the necessary applications are installed on the computer. f Click Close when the installation is complete.
4 Add the printer. • For IP printing:
a From the Apple menu, navigate to either of the following:
– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.
c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner. d Click the IP tab. e Type the printer IP address in the address field, and then click Add.
a From the Finder, navigate to:
Applications > Utilities b Double‑click Printer Setup Utility or Print Center.
c From the printer list, click Add, and then click IP Printer. d Type the scanner IP address in the address field, and then click Add. • For AppleTalk printing:
– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5 or earlier.
a From the Apple menu, navigate to:
System Preferences > Print & Fax b Click +, and then navigate to:
AppleTalk > select your printer > Add
a From the Finder, navigate to:
Applications > Utilities b Double‑click Printer Setup Utility or Print Center.

Additional printer setup 42
c From the printer list, click Add. d Click Default Browser tab > More Printers. e From the first pop‑up menu, select AppleTalk.
f From the second pop‑up menu, select Local AppleTalk Zone. g Select the device from the list, and then click Add.

Minimizing your printer's environmental impact 43
Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:
By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.
Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.
For information on how you can quickly save paper and energy using one printer setting, see "Using Eco-Mode".
As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.
While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:
Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.
Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions

Minimizing your printer's environmental impact 44
caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.
Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.
Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:
1 Minimize paper consumption.
2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.
3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.
Test results indicate that the following paper types are at risk for use with laser printers:
For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.
There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:
If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper for a printed document by selecting 2‑sided printing from the Print dialog or the Lexmark Toolbar.
You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Minimizing your printer's environmental impact 45
Before printing or making multiple copies of a document:
Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 113.
Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.
Energy Reduce energy use, especially when the printer is idle.
Paper Duplex is enabled on printer models supporting duplex.
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
Off Use factory default settings for all settings associated with Eco‑Mode. This setting supports the performance specifications for your printer.
To select an Eco‑Mode setting:
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Eco‑Mode appears, and then press .
5 Select the setting you want, and then press .
Submitting changes appears.
Use Quiet Mode to reduce the printer noise.
Choose To

Minimizing your printer's environmental impact 46
On Reduce printer noise.
Off Use factory default settings. This setting supports the performance specifications for your printer.
To select a Quiet Mode setting:
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Quiet Mode appears, and then press .
5 Select the setting you want, and then press .
Submitting changes appears.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Settings appears, and then press .
4 Press the arrow buttons until General Settings appears, and then press .
5 Press the arrow buttons until Timeout appears, and then press .
6 Press the arrow buttons until Power Saver appears, and then press .
7 Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver mode. Available settings range from 1–240 minutes.
8 Press .
Submitting changes appears.
9 Press , and then press until Ready appears.
Choose To

Minimizing your printer's environmental impact 47
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:
To return Lexmark products for recycling:
1 Go to www.lexmark.com/recycle.
2 Find the product type you want to recycle, and then select your country or region from the list.
3 Follow the instructions on the computer screen.
Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.
Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.
The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.
When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.
Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.
To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:
1 Go to www.lexmark.com/recycle.
2 From the Toner Cartridges section, select your country or region.
3 Follow the instructions on the computer screen.

Loading paper and specialty media 48
This section explains how to use the 250-sheet tray, the manual feeder, an optional 550-sheet tray, and the 650-sheet duo drawer with an integrated multipurpose feeder. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.
Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting for all trays must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.
Unlinked trays have settings that are not the same as the settings of any other tray.
To unlink a tray, change the following tray settings so that they do not match the settings of any other tray:
Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name. • Paper Size (for example: letter, A4, statement)
Load a different paper size to change the Paper Size setting for a tray. Paper Size settings are not automatic; they must be set manually from the Paper Size menu.
Assign a Custom Type name to a tray to link or unlink it. Associate the same Custom Type name to each tray that you want to link. Only trays with the same custom names assigned will link.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .
4 Press the arrow buttons until Size/Type appears, and then press .
5 Press the arrow buttons, and then press to select the tray.
The Paper Size menu appears.
6 Press the arrow buttons until the Paper Type menu appears.

Loading paper and specialty media 49
7 Press .
8 Press the arrow buttons until Custom Type <x> or another custom name appears, and then press .
Submitting changes appears, followed by Paper Menu.
9 Press , and then press to return to the Ready state.
To change the Paper Size and Paper Type settings:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .
4 Press the arrow buttons until Size/Type appears, and then press .
5 Press the arrow buttons until the correct tray appears, and then press .
6 Press when Size appears.
7 Press the arrow buttons until the correct size appears, and then press .
Submitting changes appears, followed by Size.
8 Press the arrow buttons until Type appears, and then press .
9 Press the arrow buttons until the correct type appears, and then press .
Submitting changes appears, followed by Type.
10 Press , and then press to return to the Ready state.
The Universal Paper Size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Paper Menu appears, and then press .

Loading paper and specialty media 50
4 Press the arrow buttons until Universal Setup appears, and then press .
5 Press the arrow buttons until Units of Measure appears, and then press .
6 Press the arrow buttons until the correct unit of measure appears, and then press .
Submitting changes appears, followed by the Universal Setup menu.
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.
1 From the Universal Setup menu, press the arrow buttons until Portrait Width or Portrait Height appears, and then press .
2 Press the arrow buttons to decrease or to increase the setting, and then press .
Submitting changes appears, followed by the Universal Setup menu.
Loading the standard 250‑sheet tray and optional 550‑sheet tray
The printer has one standard 250-sheet tray (Tray 1) with an attached manual feeder. The 250-sheet tray, the 650- sheet duo drawer, and the optional 550-sheet tray support the same paper sizes and types and are loaded in the same way.
1 Pull the tray out.

Loading paper and specialty media 51

2 Squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being loaded.


Loading paper and specialty media 52
3 If the paper is longer than letter‑size paper, then push the green tab at the back of the tray to elongate it.

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the paper stack with the recommended print side faceup.

6 Make sure the paper guides are secure against the edges of the paper.

Loading paper and specialty media 53
7 Insert the tray.

8 If a different type or size of paper was loaded than the type or size previously loaded in the tray, change the Paper Type or Paper Size setting for the tray from the printer control panel.
The 650‑sheet duo drawer (Tray 2) consists of a 550‑sheet tray and an integrated 100‑sheet multipurpose feeder. The drawer is loaded in the same way as the 250‑sheet tray and the optional 550‑sheet tray, and supports the same paper types and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators, as shown in the following illustration:

1 Length guide tabs
3 Width guide tabs
2 Size indicators

Loading paper and specialty media 54
1 Push the multipurpose feeder latch to the left.

2 Open the multipurpose feeder.
3 Grasp the extension, and pull it straight out until it is fully extended.
4 Prepare the paper for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.


Loading paper and specialty media 55

5 Locate the stack height limiter and tab.

2 Stack height limiter
6 Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack. • Load paper, card stock, and transparencies with the recommended print side facedown and the top edge entering first.
1 Tab · 3 Width guide · 4 Size indicators

Loading paper and specialty media 56
7 Make sure the paper is as far into the multipurpose feeder as it will go with very gentle pushing. Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.
8 From the printer control panel, set the Paper Size and Paper Type.
The standard 250‑sheet tray has an integrated manual feeder that can be used to print on different types of paper one sheet at a time.

One‑sided printing using a letterhead Two‑sided printing using a letter‑head


Loading paper and specialty media 57
2 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.
3 Adjust the paper guides to the paper width.


Paper and specialty media guide 58
Additional information for printing on speciality medias may be found in the Cardstock and Label Guide available on Lexmark.com/publications.
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.
The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long. Paper lighter than 75 g/m2 (20 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 80 g/m2 (21 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 or heavier paper.
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.
Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.
The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.
Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.
For 60 to 176 g/m2 (16 to 47 lb bond) paper, use grain long fibers.

Paper and specialty media guide 59
Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possesses characteristics that can negatively affect paper handling.
The following paper types are not recommended for use with the printer:
Using appropriate paper prevents jams and helps ensure trouble‑free printing.
To help avoid jams and poor print quality:
Use these guidelines when selecting preprinted forms and letterhead:
Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Paper and specialty media guide 60
Preprinted papers such as letterhead must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions.
Use these paper storage guidelines to help avoid jams and uneven print quality:
The following tables provide information on standard and optional paper sources and the types of paper they support.

Paper size Dimensions 250‑sheet tray Optional 550‑sheet tray Multipurpose feeder
A4 210 x 297 mm (8.3 x 11.7 in.)
A5 148 x 210 mm (5.83 x 8.3 in.)
JIS B5 182 x 257 mm (7.2 x 10.1 in.)
A6 105 x 148 mm (4.1 x 5.8 in.)
Statement 140 x 216 mm (5.5 x 8.5 in.)
Letter 216 x 279 mm (8.5 x 11 in.)
* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Paper and specialty media guide 61

Paper size Dimensions 250‑sheet tray Optional 550‑sheet tray Multipurpose feeder
Folio 216 x 330 mm (8.5 x 13 in.)
Oficio (Mexico) 216 x 340 mm (8.5 x 13 in.)
Legal 216 x 356 mm (8.5 x 14 in.)
Executive 184 x 267 mm (7.3 x 10.5 in.)
Universal* 148 x 210 mm (5.8 x 8.3 in.) up to 216 x 356 mm (8.5 x 14 in.)
76 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)
9 Envelope 98 x 225 mm (3.9 x 8.9 in.)
10 Envelope 105 x 241 mm (4.1 x 9.5 in.)
DL Envelope 110 x 220 mm (4.3 x 8.7 in.)
B5 Envelope 176 x 250 mm (6.9 x 9.8 in.)
C5 Envelope 162 x 229 mm (6.4 x 9 in.)
Monarch 105 x 241 mm (4.1 x 9.5 in.)
Other Envelope 98 x 162 mm (3.9 x 6.3 in.) up to 176 x 250 mm (6.9 x 9.8 in.)
* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Paper and specialty media guide 62
as the optional 550‑sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights. • The optional 550‑sheet tray is not available for all printer models.

* Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the standard tray, manual feeder, and the multipurpose feeder.
Paper type 250‑sheet tray Optional 550‑sheet tray
Multipurpose feeder Manual feeder
Light1, 2 60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)
60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)
60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)
60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)
Plain1, 2 75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)
75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)
75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)
75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)
1 Paper types must be set to match the supporting paper weights.
2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.
3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.
4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250‑sheet tray, manual feeder, and multipurpose feeder.
5 The pressure sensitive area must enter the printer first.
6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.
7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Paper and specialty media guide 63
Paper type 250‑sheet tray Optional 550‑sheet tray
Multipurpose feeder Manual feeder
Heavy1, 2 90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)
90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)
90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)
90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)
Cardstock1, 2 105 to 176 g/m2 grain long (27.8 to 47 lb bond)
105 to 176 g/m2 grain long (27.8 to 47 lb bond)
105 to 176 g/m2 grain long (27.8 to 47 lb bond)
105 to 176 g/m2 grain long (27.8 to 47 lb bond)
Glossy papers Book—88 to 176 g/m2
Book—88 to 176 g/m2
Book—88 to 176 g/m2
Book—88 to 176 g/m2
grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)
grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)
grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)
grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)
Card stock—maximum (grain long)3
Index Bristol— 120 g/m2 (67 lb)
Index Bristol— 120 g/m2 (67 lb)
Index Bristol— 120 g/m2 (67 lb)
Index Bristol— 120 g/m2 (67 lb)
Tag—120 g/m2 (74 lb)
Tag—120 g/m2 (74 lb)
Tag—120 g/m2 (74 lb)
Tag—120 g/m2 (74 lb)
Cover—135 g/m2
Cover—135 g/m2
Cover—135 g/m2
Cover—135 g/m2
Card stock—maximum (grain short)1
Index Bristol— 163 g/m2 (90 lb)
Index Bristol— 163 g/m2 (90 lb)
Index Bristol— 163 g/m2 (90 lb)
Index Bristol— 163 g/m2 (90 lb)
Tag—163 g/m2 (100 lb)
Tag—163 g/m2 (100 lb)
Tag—163 g/m2 (100 lb)
Tag—163 g/m2 (100 lb)
Cover—176 g/m2
Cover—176 g/m2
Cover—176 g/m2
Cover—176 g/m2
Transparencies4 170–180 g/m2 (45 to 48 lb) N/A 170–180 g/m2 (45 to 48 lb) 170–180 g/m2 (45 to 48 lb)
Labels—maximum5 Paper—131 g/m2
Paper—131 g/m2 (35 lb bond)
Paper—131 g/m2
Paper—131 g/m2
Envelopes6,7 X X 60 to 105 g/m2 (16 to 28 lb bond) 60 to 105 g/m2 (16 to 28 lb bond)
1 Paper types must be set to match the supporting paper weights.
2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.
3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.
4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250‑sheet tray, manual feeder, and multipurpose feeder.
5 The pressure sensitive area must enter the printer first.
6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.
7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Paper and specialty media guide 64
Paper type 250‑sheet tray Optional 550‑sheet tray Multipurpose tray
Paper 250 sheets1 550 sheets1 100 sheets1
Labels 1002 2002 502
Transparencies 50 X 50
Envelopes X X 10
Other X X Various quantities3
1 Based on 75 g/m2 (20 lb) paper
2 Capacity varies depending on label material and construction.
3 Capacity varies depending on the weight and type of paper.
Paper type Standard output bin1
Paper 100 sheets2
1 Capacity may vary depending on media specifications and the printer operating environment.
2 Based on 75 g/m2 (20 lb) paper

This chapter covers printing, printer reports, and job cancellation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see "Avoiding jams" and "Storing print media."
1 Load paper into a tray or feeder.
2 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper.
3 Do one of the following:
a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.
a Customize the settings as needed in the Page Setup dialog:
1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:
1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings as needed.
Page orientation is important when printing on letterhead. Use the following table to determine which direction to load the letterhead:
Printing 65

Source or process Print side and paper orientation
Printed letterhead design is placed faceup. The top edge of the sheet with the logo is placed at the front of the tray.
Duplex (two‑sided) printing from trays
Printed letterhead design is placed facedown. The top edge of the sheet with the logo is placed at the back of the tray.
Manual feeder (simplex printing)
Preprinted letterhead design is placed facedown. The top edge of the sheet with the logo should enter the manual feeder first.
Printing 66 · Multipurpose feeder


Preprinted letterhead design is placed faceup. The top edge of the sheet with the logo should enter the manual feeder last.
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
Print samples on the envelopes being considered for use before buying large quantities.
When printing on envelopes:
(24 lb bond) weight. • Use only new envelopes.
Printing 67

Print samples on the labels being considered for use before buying large quantities.
When printing on labels:
releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25 psi (172 kPa) pressure without
Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.
Printing 68

When printing on card stock:
A USB port is located on the printer control panel. Insert a flash drive to print supported file types.
To print from a flash drive:
1 Make sure the printer is on and Ready or Busy appears.
2 Insert a flash drive into the USB port.
Printing 69

3 Press the arrow button until the document you want to print appears, and then press .
4 Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print job.
Flash drive File type
Documents:
Images:
Printing 70

You can connect a PictBridge‑enabled digital camera to the printer, and use the buttons on the camera to select and print photos.
1 Insert one end of the USB cable into the camera.
2 Insert the other end of the USB cable into the USB port on the front of the printer.

3 Follow the instructions on the camera to select and print photos.
For more information on printing these pages, see “Printing menu settings pages” on page 32 and “Printing a network setup page” on page 32.
To print samples of the fonts currently available for your printer:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Print Fonts appears, and then press .
5 Press the arrow buttons until PCL Fonts, PostScript Fonts, or PPDS Fonts appears, and then press .
After the font sample list prints, Ready appears.
Printing 71

A directory list shows the resources stored in flash memory or on the hard disk.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Print Directory appears, and then press .
After the directory list prints, Ready appears.
Print the print quality test pages to isolate print quality problems.
1 Turn the printer off.
2 Hold down and the right arrow button while turning the printer on.
3 Release the buttons when the dots appear, and wait for CONFIG MENU to appear.
4 Press the arrow buttons until PRINT_QUAL_TXT appears, and then press .
The print quality test pages print.
5 Press the arrow buttons until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, and then Ready appears.
1 Press .
Stopping . . . appears, followed by Cancel Print Job.
2 Press .
Canceling appears.
1 Open the printers folder.
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
Printing 72 · In Windows 8

In Windows 7 or earlier
or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.
c Press Enter, or click OK.
2 Double‑click the printer icon.
3 Select the print job you want to cancel.
4 Click Delete.
2 From the printer window, select the print job you want to cancel, and then delete it.
Printing 73 · a Click


Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, adjust the paper guides.
3 From the printer control panel, press for a black only copy or for a color copy.
4 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Load an original document faceup, short edge first into the ADF.
2 Adjust the paper guides.
Copying 74

3 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies.
4 Change the copy settings as needed.
5 From the printer control panel, press for a black only copy or for a color copy.
1 Place an original document facedown on the scanner glass in the upper left corner.
2 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies.
3 Change the copy settings as needed.
4 From the printer control panel, press for a black only copy or for a color copy.
5 Place the next document on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Place a photo facedown on the scanner glass in the upper left corner.
2 From the printer control panel, press the Copy button.
3 Press the Content button until the light next to Photo comes on.
4 Change the copy settings as needed.
5 From the printer control panel, press for a black only copy or for a color copy.
6 Place the next document on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
5 Press the arrow buttons until Paper Source appears, and then press .
6 Press the arrow buttons until the tray or source containing the transparencies appears, and then press .
7 Change the copy settings as needed.
Copying 75

8 Press for a black only copy or for a color copy.
9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
5 Press the arrow buttons until Paper Source appears, and then press .
6 Press the arrow buttons until the tray or source containing the letterhead appears, and then press .
7 Change the copy settings as needed.
8 Press for a black only copy or for a color copy.
9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
Original Size appears.
5 Press .
6 Press the arrow buttons until the size of the original document appears, and then press .
7 Press the arrow buttons until Paper Source appears, and then press .
8 Press the arrow buttons until the tray or source containing the size you want the copy to be appears, and then press .
Copying 76

9 Change the copy settings as needed.
10 Press for a black only copy or for a color copy.
11 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
12 Press to return to the Ready state.
During the copy process, you can select the tray that contains the paper type of choice. For example, if specialty media is loaded in the multipurpose feeder, and you want to make copies on that media:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
5 Press the arrow buttons until Paper Source appears, and then press .
6 Press the arrow buttons until the tray or source containing the media you want the copy to be on appears, and then press .
7 Change the copy settings as needed.
8 Press for a black only copy or for a color copy.
9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
10 Press to return to the Ready state.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 Press the Duplex/2‑Sided button.
5 Press the arrow buttons until 1 To 2 Sided appears, and then press .
The first number represents sides of the original documents; the second number represents sides of the copy. For example, select 1‑sided to 2‑sided if you have 1-sided original documents and you want 2‑sided copies.
Copying 77

6 Press for a black only copy or for a color copy.
7 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The factory default setting for Scale is Auto. If you leave Scale set to Auto, then the content of your original document will be scaled to fit the size of the paper onto which you are copying.
To reduce or enlarge a copy:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 Press the Scale button.
5 Press the arrow buttons until the scale option you want appears, and then press .
If you selected Custom then do the following:
a Press the arrow buttons to decrease or increase the size, or enter a number between 25 and 400 on the numeric
keypad. b Press .
6 Press for a black only copy or for a color copy.
7 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 Press the Darkness button.
5 Press the arrow buttons to make the copy lighter or darker.
6 Press .
7 Press for a black only copy or for a color copy.
8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copying 78

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
5 Press for a black only copy or for a color copy.
6 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
7 Press to return to the Ready state.
If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).
By default, Collate is set to On. If you do not want to collate your copies, then change the setting to Off.
To turn collation off:
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
5 Press the arrow buttons until Collate appears, and then press .
6 Press the arrow buttons until Off [1,1,1,2,2,2] appears, and then press .
7 Press for a black only copy or for a color copy.
8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copying 79 · Collated Not collated

1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Copy Settings.
4 Click Separator Sheets.
6 Click Submit.
In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Copy button.
4 From the Copy area, press the Options button.
5 Press the arrow buttons until Paper Saver appears, and then press .
6 Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the same side of one sheet, stop at 4 on 1 Portrait, and then press .
7 Press for a black only copy or for a color copy.
8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copying 80

A copy job can be canceled when the document is in the ADF, on the scanner glass, or while the document is printing. To cancel a copy job:
1 From the printer control, panel press .
Stopping appears, followed by Cancel Job.
2 Press to cancel the job.
Canceling appears.
The printer clears all pages in the ADF or printer and then cancels the job. Once the job is canceled, the copy screen appears.
When should I use Text mode?
When should I use Text/Photo mode?
When should I use Photograph mode?
Use Photograph mode when the original document is a high-quality photograph or inkjet print.
Copying 81 · Question Tip


Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer. You can type the e‑mail address, use a shortcut number, or use the address book.
For e-mail to operate, it must be turned on in the printer settings and have a valid IP address or gateway address. To set up the e-mail function:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click E-mail/FTP Settings.
4 Click E-mail Server Setup.
5 Change the e‑mail settings as needed.
6 Click Submit.
E-mailing 82

1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click E-mail/FTP Settings.
4 Click Manage E-mail Shortcuts.
5 Change the e‑mail settings as needed.
6 Click Submit.
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Manage Destinations.
4 Click E-mail Destination Setup.
5 Type a unique name for the recipient, and then enter the e-mail address.
6 Select the scan settings (Format, Content, Color, and Resolution).
7 Enter a shortcut number, and then click Add.
If you enter a number that is already in use, you are prompted to select another number.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Scan/Email button.
Scan to E‑mail appears.
E-mailing 83

4 Press .
Search or Manual Entry appears.
5 Press to search the address book or press the arrow buttons until Manual appears, and then press to select or enter an e‑mail address.
a After selecting Search on the printer control panel, press the arrow buttons until the address you want
appears, and then press . b Press 1 to search for another address or press 2 to end the search.
After you press 2, Press Start To Begin appears. c Press to send a black only copy or to send a color copy.
Manually entering an e‑mail address
After selecting Manual on the printer control panel, Entry Name appears on the first line and a blank line with a blinking cursor appears on the second line.
a Press the button on the numeric keypad that corresponds with the number or letter you want. The first time
you press the button, the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the
next space. c Once the e‑mail address is entered, press . Another E‑mail? 1=Yes 2=NO appears. d Press 1 to enter another address, or press 2 to end the address entry.
After you press 2, Press Start To Begin appears. e Press to send a black only copy or to send a color copy.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Scan/Email button.
Scan to E‑mail appears.
4 Press .
Search appears.
5 Press # , and then enter the recipient's shortcut number.
E-mailing 84

6 Press 1 to enter another shortcut or press 2 to end the shortcut entry.
After you press 2, Press Start To Begin appears.
7 Press to send a black only e‑mail or to send a color e‑mail.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Scan/Email button.
Scan to E‑mail appears.
4 Press .
Search appears.
5 Press to search the address book.
6 Press the arrow buttons until the address you want appears, and then press .
7 Press 1 to search for another address or press 2 to end the search.
After you press 2, Press Start To Begin appears.
8 Press to send a black only copy or to send a color copy.
An e‑mail can be canceled when the document is in the ADF or on the scanner glass. To cancel an e‑mail:
1 From the printer control panel, press .
Stopping appears, and then Cancel Job appears.
2 Press to cancel the job.
Canceling appears.
The printer clears all pages in the ADF and then cancels the job. Once the job is canceled, the copy screen appears.
E-mailing 85


Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
The following connection methods may not be applicable in all countries or regions.

Faxing 86

To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web Server and then enter the Settings menu.
When the printer is turned on for the first time or if the printer has been off for an extended time, a series of start‑up screens appear. If the printer has fax capabilities, then the following screens appear:
Station Name Station Number
1 When Station Name appears, enter the name to be printed on all outgoing faxes. a Press the button on the numeric keypad that corresponds with the number or letter you want. The first time
you press the button, the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the
next space.
2 After entering the Station Name, press .
The display changes to Station Number.
3 When Station Number appears, enter the printer fax number. a Press the button on the numeric keypad that corresponds with the number you want. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the
next space.
4 After entering the Station Number, press .
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Fax Settings.
4 Click Analog Fax Setup.
5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6 Click inside the Station Number box, and then enter the printer fax number.
7 Click Submit.
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. To determine the best way to set up the printer, see the following table.
Faxing 87

Equipment and service options Fax connection setup
Connect directly to the telephone line See “Connecting to an analog telephone line” on page 88
Connect to a Digital Subscriber Line (DSL or ADSL) service See “Connecting to a DSL service” on page 89.
Connect to a Private Branch eXchange (PBX) or Integrated Services Digital Network (ISDN) system
See “Connecting to a PBX or ISDN system” on page 89.
Use a Distinctive Ring service See “Connecting to a Distinctive Ring Service” on page 90.
Connect to a telephone line, telephone, and answering machine
See “Connecting a telephone or answering machine to the same telephone line” on page 90
Connect through an adapter used in your area See “Connecting to an adapter for your country or region” on page 91.
Connect to a computer with a modem See “Connecting to a computer with a modem” on page 97.
If your telecommunications equipment uses a US‑style (RJ11) telephone line, then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Faxing 88

If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to the DSL filter.
3 Connect the DSL filter cable to an active telephone wall jack.

If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to the port designated for fax and telephone use.
Faxing 89

A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple phone numbers on one telephone line with each phone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, follow these steps to connect the equipment:
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to an active analog telephone wall jack.

3 Change the distinctive ring setting to match the setting you want the printer to answer. a From the printer control panel, press .
b Press the arrow buttons until Settings appears, and then press .
c Press the arrow buttons until Fax Settings appears, and then press .
d Press the arrow buttons until Distinctive Rings appears, and then press .
e Press the arrow buttons until the desired ring tone appears, and then press .
1 Remove the plug from the bottom EXT port on the back of the printer.

Faxing 90

2 Connect your telecommunications equipment directly to the bottom EXT port on the back of the printer.



The following countries or regions may require a special adapter to connect the telephone cable to the wall outlet.
Faxing 91

For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering machine, telephone, or other telecommunications equipment to the printer.
There is a plug installed in the bottom EXT port of the printer. This plug is necessary for the proper functioning of the adapter.
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the wall jack.
Faxing 92 · Country/region


Faxing 93

3 Connect the answering machine or telephone to the adapter

Faxing 94

There is a plug installed in the bottom EXT port of the printer. This plug is necessary for the proper functioning of the fax function and the proper operation of downstream phones.
1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.
2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the N slot of an active analog telephone wall jack.
Faxing 95


3 If you would like to use the same line for both fax and telephone communication, then connect a second telephone line (not provided) between the telephone and the F slot of an active analog telephone wall jack.

Faxing 96

4 If you would like to use the same line for recording messages on your answering machine, then connect a second telephone line (not provided) between the answering machine and the other N slot of the active analog telephone wall jack.

Connect the printer to a computer with a modem to send faxes from the software program.
2 Connect a telephone cord into the top LINE port of the printer, and then plug it into an active telephone wall jack.

Faxing 97

3 Remove the protective plug from the bottom EXT port of the printer.

4 Connect a second telephone cord from the telephone to the computer modem.

5 Connect a third telephone cord from the computer modem to the bottom EXT port of the printer.

Faxing 98

To have the designated fax name and fax number printed on outgoing faxes:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Fax Settings.
4 Click Analog Fax Setup.
5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6 Click inside the Station Number box, and then enter the printer fax number.
7 Click Submit.
You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have to reset the date and time. To set the date and time:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Set Date and Time.
4 Click inside the Set Date & Time box, and then enter the current date and time.
5 Click Submit.
The printer can be set to automatically adjust for daylight saving time:
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Set Date and Time.
4 In the Daylight Savings box, click on one of the following: Yes turns daylight saving on. No turns daylight saving off.
5 Click Submit.
Faxing 99

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Fax button.
To: appears on the first line, and the time and date appear on the second line.
4 Enter the fax number, and then press .
5 Press 1 to enter another fax number, or press 2 to end fax number entry.
6 Press to send a black only fax or to send a color fax.
The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.
1 With a document open, click File > Print.
2 Select the printer, and then click Properties, Preferences, Options, or Setup.
3 Navigate to:
Fax tab > Enable fax
4 Enter the recipient fax number or numbers in the “Fax number(s)” field.
5 If necessary, enter a prefix in the “Dialing prefix” field.
6 Select the appropriate paper size and page orientation.
7 If you want to include a cover page with the fax, then select Include cover page with fax, and then enter the appropriate information.
8 Click OK.
Faxing 100

Instead of entering the entire phone number of a fax recipient on the printer control panel each time you want to send a fax, you can create a permanent fax destination and assign a shortcut number. You can create a shortcut to a single fax number or a group of fax numbers.
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Manage Destinations.
4 Click Fax Shortcut Setup.
5 Type a unique name for the shortcut, and then enter the fax number.
To create a multiple‑number shortcut, enter the fax numbers for the group.
6 Assign a shortcut number.
If you enter a number that is already in use, you are prompted to select another number.
7 Click Add.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Fax button.
To: appears on the first line, and the time and date appear on the second line.
4 Press .
Address Book Search appears.
5 Press the arrow buttons until Add appears, and then press .
Faxing 101

6 Press the arrow buttons until Enter Fax Number appears, and then press .
7 Enter the fax number, and then press .
8 Press 1 to enter another fax number, or press 2 to end fax number entry.
9 After selecting 2=NO, Enter Name appears. a Press the button on the keypad that corresponds with the letter you want. The first time you press the button,
the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the
next space. c Once the fax name is entered, press . Save as Shortcut appears. d Enter the shortcut number, and then press .
Fax destination shortcuts are just like the speed dial numbers on a telephone or fax machine. You can assign shortcut numbers when creating permanent fax destinations. Permanent fax destinations or speed dial numbers are created in the Manage Destinations link located under the Configuration tab on the Embedded Web Server. A shortcut number (1–99999) can contain a single recipient or multiple recipients. By creating a group fax destination with a shortcut number, you can quickly and easily fax broadcast information to an entire group.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 Press # .
Enter Shortcut: appears.
4 Enter the shortcut number.
5 Press to send a black only fax or to send a color fax.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
Faxing 102

3 From the printer control panel, press the Fax button.
To: appears on the first line, and the time and date appear on the second line.
4 Press , and then press the arrow buttons until the fax number you want appears. Then, press .
Adjusting the resolution setting changes the quality of the fax. Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality).
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the Fax area of the printer control panel, press the Resolution area.
4 Press the arrow buttons until the resolution value you want appears, and then press .
5 Press to send a black only copy or to send a color copy.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Darkness button.
4 Press the arrow buttons to make the fax lighter or darker.
5 Press .
6 Press to send a black only fax or to send a color fax.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Fax button.
To: appears on the first line, and the time and date appear on the second line.
4 Enter the fax number, and then press .
Faxing 103

5 From the Fax area, press the Options button.
6 Press the arrow buttons until Delayed Send appears, and then press .
Set Send Time appears on the first line, and HH:MM with a blinking cursor appears on the second line.
7 Using the numeric keypad, enter the time you want to send the fax. After you enter the time, the cursor moves to the AM or PM field if the printer clock is set to 12 Hour format. Press the arrow buttons to change from AM to PM or PM to AM.
8 Press .
Set Send Date appears on the first line, and MM‑DD‑YYYY with a blinking cursor appears on the second line.
9 Using the numeric keypad, enter the date you want to send the fax.
10 Press .
11 Press to send a black only fax or to send a color fax.
1 Open a Web browser.
2 In the address bar, type the IP address of the printer, and then press Enter.
3 Click Reports.
4 Click Fax Settings.
5 Click Fax Job Log or Fax Call Log.
A fax can be canceled when the document is in the ADF or on the scanner glass. To cancel a fax:
1 From the printer control panel, press .
Stopping appears, and then Cancel Job appears.
2 Press to cancel the job.
Canceling appears.
The printer clears all pages in the ADF and then cancels the job.
Faxing 104

This option lets you choose the size of the documents you are going to fax.
1 From the Fax area of the printer control panel, press the Options button.
Original Size appears.
2 Press .
3 Press the arrow buttons until the size of the original document appears, and then press .
This option tells the printer the original document type. Choose from Text, Text/Photo, or Photo. Content affects the quality and size of your scan.
This option informs the printer if the original document is simplex (printed on one side) or duplex (printed on both sides). This lets the scanner know what needs to be scanned for inclusion in the fax.
This option increases how closely the scanner examines the document you want to fax. If you are faxing a photo, a drawing with fine lines, or a document with very small text, then increase the Resolution setting. This will increase the amount of time required for the scan and will increase the quality of the fax output.
This option adjusts how light or dark your faxes will turn out in relation to the original document.
Faxing 105

When should I use Text mode?
When should I use Text/Photo mode?
When should I use Photo mode?
Use Photo mode when faxing photos printed on a laser printer or taken from a magazine or newspaper.
This option lets you print and forward received faxes to a fax number.
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Fax Settings.
4 Click Analog Fax Setup.
6 From the Forward to list, select Fax.
7 Click inside the Forward to Shortcut box, and then enter the shortcut number where you want the fax forwarded.
8 Click Submit.
Faxing 106 · Question Tip

Scanning to an FTP address 107

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.
Once an FTP destination has been configured by your system support person, the name of the destination becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination could also be another PostScript printer; for example, a color document can be scanned and then sent to a color printer. Sending a document to an FTP server is similar to sending a fax. The difference is that you are sending the information over your network instead of over the phone line.
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Scan/Email button.
4 Press the arrow buttons until FTP appears, and then press .
5 Type the FTP address.
6 Press to send a black‑only copy or to send a color copy.

Scanning to an FTP address 108
1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the printer control panel, press the Scan/Email button.
4 Press the arrow buttons until FTP appears, and then press .
5 Press # , and then enter the recipient's shortcut number.
6 Press 1 to enter another shortcut or press 2 to end the shortcut entry.
After you press 2, Press Start To Begin appears.
7 Press to send a black‑only copy or to send a color copy.
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Under Other Settings, click Manage Destinations.
4 Click FTP Shortcut Setup.
5 Select the scan settings (Format, Content, Color, and Resolution).
6 Enter a shortcut number, and then click Add.
If you enter a number that is already in use, you are prompted to select another number.

Scanning to a computer or USB flash memory device 109


Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
The scanner lets you scan documents directly to a computer or a USB flash memory device. The computer does not have to be directly connected to the printer for you to receive Scan to PC images. You can scan the document back to the computer over the network by creating a scan profile on the computer and then downloading the profile to the printer.
1 Type the printer IP address into the address field of your Web browser.
2 Click Scan Profile.
3 Click Create Scan Profile.
4 Select your scan settings, and then click Next.
5 Select a location on your computer where you want to save the scanned output file.
6 Enter a profile name.
The profile name is also the user name, it is the name that appears in the Scan Profile list on the display.
7 Click Submit.

Scanning to a computer or USB flash memory device 110
8 Scan your document.
A shortcut number was automatically assigned when you clicked Submit. Remember this shortcut number and use it when you are ready to scan your documents.
a Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
c Press the Scan/Email button.
d Press the arrow buttons until Profiles appears, and then press .
e Press # .
Enter Shortcut: appears. f Enter the shortcut number.
g Press or to send the scanned image.
9 Return to the computer to view the file.
The output file is saved in the location you specified or launched in the program you specified.
1 Insert a USB flash memory device into the front USB port.
Access USB appears.
2 Press 1 on the keypad.
3 Press the arrow buttons until Scan to USB appears, and then press .
Press Start To Begin appears.
4 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
5 If you are loading a document into the ADF, then adjust the paper guides.
6 Press or to send the scanned image.

Scanning to a computer or USB flash memory device 111
This option informs the printer if your original document is simplex (printed on one side) or duplex (printed on both sides). This lets the scanner know what needs to be scanned for inclusion in the document.
This option adjusts how light or dark your scanned documents will turn out in relation to the original document.
When should I use Text mode?
When should I use Text/Photo mode?
When should I use Photo mode?
Use Photo mode when scanning photos printed on a laser printer or taken from a magazine or newspaper.
The Scan Center software lets you modify scan settings and select where to send the scanned output. Scan settings modified with the Scan Center software can be saved and used for other scan jobs.
The following features are available:
Question Tip

Scanning to a computer or USB flash memory device 112
You can use the Lexmark ScanBackTM Utility instead of the Embedded Web Server to create Scan to PC profiles. The ScanBack Utility is on the Software and Documentation CD.
1 Set up your Scan to PC profile. a Launch the ScanBack Utility. b Select the printer you want to use.
If no printers are listed, then see your system support person to obtain a list, or click the Setup button to manually search for an IP address or hostname. c Follow the instructions on the screens to define the type of document being scanned and what kind of output you want to create. d Make sure to select:
A dialog box appears with your scan profile information and the status of the received images.
2 Scan your original documents. a Locate the printer you specified in the scan profile. b Load all pages in the ADF or on the scanner glass.
c From the printer control panel, press Scan/Email.
d Press the arrow buttons until Profiles appears, and then press .
e Press the arrow buttons until your scan profile name appears, and then press .
f Press or to send the scanned image.
Your output file is saved in a directory or launched in the application you specified.

Avoiding jams
The following hints can help you avoid jams.
Clearing jams 113

When a jam occurs, a message indicating the jam location appears. The following illustration and table list the paper jams that can occur and the location of each jam. Open doors and covers, and remove trays to access jam locations.

1 200 Standard 250‑sheet tray and manual feeder (Tray 1)
1 Open the front door. Inspect the area behind the front door, and then remove any jams. 2 Open the fuser cover. Inspect the area under the cover, and then remove any jams. 3 Close the front door. 4 Pull Tray 1 out. Inspect the tray area, and then remove any jams. 5 Verify that the paper is loaded correctly. 6 Reinsert Tray 1.
2 201 Under the fuser
3 202 In the fuser
4 230 In the duplex
5 235 In the duplex
6 242 and 243 550‑sheet tray 1 Pull the 550-sheet tray out, and then remove any jams. 2 Reinsert the tray.
7 250 In the multipurpose feeder
1 Press the release latch to the left to release the multipurpose feeder. 2 Inspect the multipurpose feeder, and then remove any jams. 3 Close the multipurpose feeder.
8 290 ADF Open the ADF cover, and then remove the jam.
Clearing jams 114 · Jam number · Jam location Instructions

1 Grasp the handle, and pull the standard 250-sheet tray (Tray 1) and manual feeder out.

2 Remove the jam.
3 Insert the tray.
4 Press .
1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Clearing jams 115

2 Remove the jammed paper.

3 Close the front door.
4 Press .
1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Clearing jams 116

2 Grasp the green lever, and then pull the fuser cover toward you.

3 Hold the fuser cover down, and then remove the jammed paper.
The fuser cover closes when released.

4 Close the front door.
5 Press .
Clearing jams 117

1 Grasp the front door at the side handholds, and then pull it toward you to open it.
2 Remove the jam.
3 Press .
This jam occurs when the paper is too short for the duplex unit.
1 Grasp the front door at the side handholds, and then pull it toward you to open it.
2 Remove the jam.
3 Load the tray with the correct paper size (A4, letter, legal, folio).
4 Insert the tray.
5 Close the front door.
6 Press .
1 Grasp the handle, and pull the optional 550‑sheet tray out.

2 Remove the jammed paper.
3 Insert the tray.
4 Press .
Clearing jams 118

1 Push the lever in the multipurpose feeder to access the paper jammed.

2 Remove the jam.
3 Insert the tray.
4 Press .
1 Remove all original documents from the ADF.
2 Open the ADF cover, and then remove any jammed paper.

3 Close the ADF cover.
Clearing jams 119

4 Open the scanner cover, and then remove any jammed pages.

5 Close the scanner cover.
6 Press .
Clearing jams 120

Understanding printer menus 121
Menus list
A number of menus are available to make it easy for you to change printer settings. These menus can be accessed from the printer control panel, Embedded Web Server, or the software application driver.
Supplies Menu Paper Menu Reports Network/Ports
Custom Scan Sizes Universal Setup
Fax Call Log Copy Shortcuts
E‑mail Shortcuts
Print Demo Asset Report
General Settings Copy Settings

Understanding printer menus 122
Cyan, Magenta, Yellow, or Black Toner Cartridges
Shows the status of the toner cartridges
Early Warning Low Invalid Replace Missing or Defective OK Unsupported
Shows the status of the imaging kit
OK Replace Black Imaging Kit Replace Black and Color Imaging Kit
Shows the status of the waste toner bottle
Near Full Replace Missing OK
Sets a default paper source for all print jobs
Tray MP Feeder Manual Paper Manual Env

Understanding printer menus 123
Specifies the paper size loaded in each tray
Letter Legal Executive Oficio (Mexico) Folio Universal A4 A5 JIS B5
Specifies the type of paper loaded in each tray
Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type
Specifies the size of the paper being manually loaded
Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 A5 JIS B5

Understanding printer menus 124
Specifies the type of paper being manually loaded
Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type
Specifies the paper size loaded in the multipurpose feeder
Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 A5 JIS B5
Specifies the type of paper loaded in the multipurpose feeder.
Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

Understanding printer menus 125
Specifies the size of the envelope being manually loaded
10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope 7 3/4 Envelope 9 Envelope
Specifies the type of envelope being manually loaded
Envelope Custom Type
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the card stock loaded in a specific tray
Specifies the relative texture of the transparencies loaded in a specific tray
Specifies the relative texture of the recycled paper loaded in a specific tray
Specifies the relative texture of the Glossy paper loaded in a specific tray
Specifies the relative texture of the labels loaded in a specific tray

Understanding printer menus 126
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the envelopes loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the paper loaded in a specific tray
Specifies the relative texture of the colored paper loaded in a specific tray
Specifies the relative texture of the light paper loaded in a specific tray
Specifies the relative texture of the heavy paper loaded in a specific tray
Specifies the relative texture of the rough/cotton paper loaded in a specific tray
Specifies the relative texture of the custom paper loaded in a specific tray

Understanding printer menus 127
Plain Weight, Glossy Weight, Bond Weight, Letterhead Weight, Preprinted Weight, or Colored Weight
Identifies the relative weight of the paper loaded in a specific tray
Identifies the relative weight of the transparencies loaded in a specific tray
Identifies the relative weight of the recycled paper loaded in a specific tray
Identifies the relative weight of the labels loaded in a specific tray
Identifies the relative weight of the envelopes loaded in a specific tray or feeder
Identifies the relative weight of the card stock loaded in a specific tray
Identifies the relative weight of the light paper loaded in a specific tray
Identifies the relative weight of the heavy paper loaded in a specific tray

Understanding printer menus 128
Identifies the relative weight of the rough/cotton paper loaded in a specific tray
Identifies the relative weight of the custom paper type loaded in a specific tray
Determines whether 2‑sided printing occurs for all jobs that specify Recycled as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Glossy as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Bond as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Letterhead as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Preprinted as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Colored as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Light Paper as the paper type

Understanding printer menus 129
Determines whether 2‑sided printing occurs for all jobs that specify Heavy Paper as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Rough/Cotton as the paper type
Determines whether 2‑sided printing occurs for all jobs that specify Custom as the paper type
Associates a paper or specialty media type with a factory default Custom Type <x> name or a user‑defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional. This user‑defined name displays instead of Custom Type <x>.
Paper Card Stock Transparency Glossy Labels Envelope Rough/Cotton
Specifies a paper type when the Recycled setting is selected in other menus
Paper Card Stock Transparency Glossy Labels Envelope Cotton

Understanding printer menus 130
Specifies a non‑standard scan size.
1–14 inches (25–355.6 mm) Height
1–14 inches (25–355.6 mm) Orientation
Landscape Portrait 2 scans per side Off On
Custom Scan Size <x>
Specifies a custom scan size name and options. This name replaces a Custom Scan Size <x> name in the printer menus.
Scan Size Name Width
1–14 inches (25–355.6 mm) Height
1–14 inches (25–355.6 mm) Orientation
Landscape Portrait 2 scans per side Off On
These menu items are used to specify the height and width of the Universal Paper Size. The Universal Paper Size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.
Identifies the units of measure

Understanding printer menus 131
Sets the portrait width
3–14.7 inches 76–360 mm
Sets the portrait height
3–14.7 inches 76–360 mm
Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information
Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages
Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information
Shortcut List Prints a report containing information about configured shortcuts
Fax Job Log Prints a report containing information about the last 200 completed faxes
Fax Call Log Prints a report containing information about the last 100 attempted, received, and blocked calls
Copy Shortcuts Prints a report containing information about copy shortcuts
E‑mail Shortcuts Prints a report containing information about e‑mail shortcuts

Understanding printer menus 132
Fax Shortcuts Prints a report containing information about fax shortcuts
Profiles List Prints a list of profiles stored in the printer
Print Fonts Prints a report of all the fonts available for the printer language currently set in the printer
Print Defects Prints a repeating defects page used as a diagnostic tool for identifying print problems
Print Demo Prints a resident demonstration page
Asset Report Prints a report containing asset information including the printer serial number and model name. The report contains text and UPC barcodes that can be scanned into an asset database.
Shows the print server
Auto List of networks
Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

Understanding printer menus 133
Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Sets the size of the network input buffer
Sets the printer to process Macintosh binary PostScript print jobs
Lists all the network setup menus, regardless of the active network of the printer
Reports Menu Network Card menu TCIP Menu IPv6 Menu Wireless menu AppleTalk menu

Understanding printer menus 134
Use the following menu items to view or configure the wireless internal print server settings.
Lets you select a mode
Lets you select a setting that is compatible with your equipment
802.11n
802.11b/g
802.11b/g/n
Lets you select an available network for the printer to use
View Signal Quality Lets you view the strength of the wireless connection
View Security Mode Lets you view the security of the wireless connection
Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language
Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

Understanding printer menus 135
Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol
Sets the size of the USB input buffer
Sets the printer to process Macintosh binary PostScript print jobs
ENA Address Sets the network address information for an external print server that is attached to the printer using a USB cable
ENA Netmask Sets the netmask information for an external print server that is attached to the printer using a USB cable
ENA Gateway Sets the gateway information for an external print server that is attached to the printer using a USB cable

Understanding printer menus 136
Sets the language of the text appearing on the display
English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese
Minimizes the use of energy, paper, or specialty media
Off Energy Energy/Paper Paper
Reduces the amount of noise produced by the printer

Understanding printer menus 137
Instructs the printer to run the setup wizard
Specifies the printer factory default measurements. The default setting is determined by the country selection in the initial setup wizard.
U.S. Metric
Scan to PC Port Range
Specifies a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon.
Sets the function the printer enters when Go, Content, Darkness, or any number is pressed on the printer control panel
Formats the printer date
MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD
Formats the printer time
12 hour A.M./P.M. 24 hour clock
Sets an alarm to sound when the printer requires operator intervention. Available selections for each alarm type are:
Alarm Control Cartridge Alarm
Specifies the number of minutes of inactivity before some systems begin entering a minimum power state.
Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Understanding printer menus 138
Sets the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job
Sets the amount of time in seconds the printer waits for additional data before canceling a print job
Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period
Specifies whether the printer reprints jammed pages
Lets the printer successfully print a page that may not have printed otherwise

Understanding printer menus 139
Returns the printer settings to the factory default settings
Do Not Restore Restore Now
Specifies the type of content contained in the copy job
Specifies whether an original document is duplex (two‑sided) or simplex (one-sided), and then specifies whether the copy should be duplex or simplex
1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided
Sets two or four sheets of an original document together on the same page
Off 2 on 1 Portrait 2 on 1 Landscape 4 on 1 Portrait 4 on 1 Landscape

Understanding printer menus 140
Specifies whether a border is printed around the edge of the page at the margins
Keeps the pages of a print job stacked in sequence when making multiple copies of the job
Specifies the paper size of the original document
Letter Legal Executive Folio Statement Universal ID Card 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size A4 A5 Oficio (Mexico) A6 JIS B5
Specifies the paper source for copy jobs
Tray Single Sheet Feeder Multi Sheet Feeder
Places a sheet of paper between transparencies
Places a sheet of paper between pages, copies, or jobs based on the value selected
None Between Copies Between Jobs Between Pages
Specifies a paper source
Tray Manual Feeder
Specifies the level of darkness for the copy job
‑4 to +4
1–999 Specifies the number of copies for the copy job

Understanding printer menus 141
Specifies overlay text that is printed on each page of the copy job
Off Confidential Copy Draft Urgent Custom
Allows interruption of a print job to copy a page or document
Adjusts the amount of background visible on a copy
‑4 to +4
Specifies the amount of color from ‑4 to +4.
Specifies the contrast used for the copy job
0–5 Best for content
Adjusts the amount of shadow detail visible on a copy
‑4 to +4
Specifies if the original document is scanned edge-to‑edge prior to copying
Scan edge to edge
1–5 Adjusts the amount of sharpness on a copy
Station Name Specifies the name of the fax within the printer
Station Number Specifies a number associated with the fax
Specifies how the fax is identified
Station Name Station Number

Understanding printer menus 142
Sets the printer to fax manually only, which requires a line splitter and a telephone hand set
Defines the amount of non-volatile memory used to fax a job
All receive Mostly receive Equal Mostly sent All send
Specifies whether the printer may cancel fax jobs
Specifies the type of caller ID being used
Specifies quality in dots per inch (dpi). A higher resolution gives greater print quality, but it increases the fax transmission time for outgoing faxes.
Standard Fine Super Fine Ultra Fine

Understanding printer menus 143
Specifies the paper size of the document that is being scanned
Letter Legal Executive Mixed Letter/Legal Folio Statement A4 A5 A6 Oficio (Mexico) JIS B5 4 x 6 3 x 5 ID Card Universal Custom Scan Size Business Card
Specifies how the text and graphics are oriented on the page
Off Long edge Short edge
Specifies the type of content that will be scanned to fax
Lightens or darkens the output
‑4 to +4
A numeric entry field is provided to enter numbers
0–9 Specifies the number of times the printer tries to send the fax to a specified number
1–200 Specifies the number of minutes between redials

Understanding printer menus 144
Enables switchboard blind dialing without a dial tone
Enables Error Correction Mode for fax jobs
Lets you send faxes by scanning at the printer
Allows driver to fax jobs to be sent by the printer
Specifies the dialing sound, either as a tone or a pulse
Specifies the maximum speed in baud at which faxes are sent
2400 4800 9600 14400 33600
Adjusts the amount of background visible on a copy
‑4 to +4
Specifies the contrast of the output
Best for content 0–5
Adjusts the amount of shadow detail visible on a copy
‑4 to +4
Scan edge to edge
Specifies if the original document is scanned edge-to-edge
1–5 Adjusts the amount of sharpness on a fax
Enable Color Fax Scans
Auto Convert Color Faxes to Mono Faxes
Converts all outgoing faxes to black and white

Understanding printer menus 145
Allows fax jobs to be received by the printer
1–25 Specifies the number of rings before answering an incoming fax job
Allows the printer to answer an incoming fax job
1–9 Lets you enter a code on the telephone number pad to begin receiving a fax
Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source
Specifies the paper source selected to supply paper for the printer to print an incoming fax
Auto Size Match Tray Single Sheet Feeder Multi‑Page Feeder
Enables duplex (two-sided) printing for incoming fax jobs
Prints the transmission information at the bottom of each page from a received fax
Specifies the maximum speed in baud at which faxes are received
2400 4800 9600 14400 33600
Block No Name Fax
Enables blocking of incoming faxes sent from devices with no station ID specified

Understanding printer menus 146
Enables printing of a transmission log after each fax job
Print log Do not print log Print only for error
Enables printing of a receive error log following a receive error
Print Never Print on Error
Enables automatic printing of fax logs
Selects the source of the paper used for printing logs
Specifies whether printed logs display the dialed number or the station name
Remote Station Name Dialed Number
Enables access to the Fax Job log
Enables access to the Fax Call log
Always Off On until Connected Always On
Controls the volume setting
Controls the ringer volume for the fax speaker

Understanding printer menus 147
Answers calls with a one‑ring pattern
Answers calls with a double‑ring pattern
Triple Ring answers calls with a triple‑ring pattern
Enables or disables the USB port on the front of the printer
Enables or disables the ability of the printer to update its firmware code from a USB device
Specifies the format of the file
PDF (.pdf) TIFF (.tif) JPEG (.jpg)
1.2–1.6 Sets the version of the PDF file that will be scanned to USB
Specifies the type of content that will be scanned to USB

Understanding printer menus 148
Specifies whether a job prints in grayscale or color
Specifies how many dots per inch are scanned
75 150 200 300 400 600
Lightens or darkens the output
‑4 to +4
Specifies the orientation of the scanned image
Specifies the paper size of the document that is being scanned
Letter Legal Executive Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size A4 A5 Oficio (Mexico) A6 JIS B5
Specifies how the text and graphics are oriented on the page
Off Long edge Short edge

Understanding printer menus 149
JPEG Quality Text or Text/Photo
5–90 Sets the quality of a JPEG text or text/photo image in relation to file size and the quality of the image.
5–90 Sets the quality of a JPEG photo image in relation to file size and the quality of the image
Use Multi‑Page TIFF
Provides a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to USB job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.
Enables the Text/Photo mode to have smaller file sizes by using 1‑bit images when Color is set to Off
8 bit 1 bit
Adjusts the amount of background visible on a copy
‑4 to +4
Specifies the contrast of the output
0–5 Best for content
Adjusts the amount of shadow detail visible on a scanned image
‑4 to +4
Scan edge to edge
Specifies if the original document is scanned edge-to-edge
1–5 Adjusts the sharpness of a scanned image
Copies Specifies the number of copies to print

Understanding printer menus 150
Enables duplex (two-sided) printing
2 sided 1 sided
Determines which printer language the print server uses to send data to the printer
PS Emulation PCL Emulation PPDS Emulation
Determines the print area on paper
Normal Fit to Page Whole Page
Collects permanent resources that have been downloaded on the printer and automatically writes them to the flash drive
Saves the permanently downloaded resources
Specifies whether duplex (2‑sided) printing is set as the default for all print jobs
2 Sided 1 Sided
Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page
Long Edge Short Edge

Understanding printer menus 151
1–999 Specifies a default number of copies for each print job
Specifies whether blank pages are inserted in a print job
Do Not Print Print
Stacks the pages of a print job in sequence when printing multiple copies
Specifies whether blank separator sheets are inserted
None Between Copies Between Jobs Between Pages
Specifies the paper source for separator sheets
Tray Multi‑Page Feeder
Specifies that multiple‑page images are printed on one side of a sheet of paper
Off 2 Up 4 Up 6 Up 9 Up 16 Up
N‑Up Ordering
Specifies how the page images appear on the physical page
Horizontal Reverse Horizontal Reverse Vertical Vertical

Understanding printer menus 152
Specifies the orientation of a multiple‑page sheet
N‑Up Border
Prints a border around each page image
Adjusts the color output on the printed page
Specifies the printed output resolution
4800 CQ 1200 dpi
1–5 Lightens or darkens the printed output
Creates smoother lines with sharper edges
Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

Understanding printer menus 153
Adjusts brightness in color outputs
‑6 to +6
0–5 Adjusts contrast in color outputs
0–5 Adjusts saturation in color outputs
Lets you make subtle color adjustments to the printer output by individually altering the amount of toner being used for each color plane. Specifies the amount of color from ‑5 to +5.
Cyan Magenta Yellow Black Reset Defaults
Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer
sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

Understanding printer menus 154
Customizes the RGB color conversions. The values for each setting are:
RGB Image RGB Text RGB Graphics
Vivid sRGB Display Display—True Black sRGB Vivid Off
Customizes the CMYK color conversions. The values for each setting are:
CMYK Image CMYK Text CMYK Graphics
USCMYK EuroCMYK Vivid CMYK Off
Color Adjust Initiates an automatic color adjust calibration.
Assists in isolating the source of a print job problem

Understanding printer menus 155
Provides an estimate of the percentage coverage of cyan, magenta, yellow, and black on a page. The estimate is printed on a separator page.
Scales page content to fit the selected page size
Specifies whether to print annotations in the PDF
Do Not Print Print
Prints a page containing the PostScript error
Enhances the contrast and sharpness of low‑resolution images and smooths their color transitions
Specifies the set of fonts used by the Font Name menu item

Understanding printer menus 156
Identifies a specific font and the option where it is stored
Specifies the symbol set for each font name
Changes the point size for scalable typographic fonts
1.00–1008.00
Specifies the font pitch for scalable monospaced fonts
0.08–100
Specifies the orientation of text and graphics on the page
Specifies the number of lines that print on each page

Understanding printer menus 157
Sets the printer to print on A4‑size paper
198 mm 203 mm
Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command
Auto CR after LF
Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command
Auto LF after CR
Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders
Off None 0–199 Assign Tray
Off None 0–199 Assign Manual Paper
Off None 0–199 Assign Man Env
Displays the factory default setting assigned to each tray, drawer, or feeder
Returns all tray, drawer, and feeder assignments to the factory default settings

Understanding printer menus 158
Selects the optimal paper size, scaling, and orientation
Inverts bi‑tonal monochrome images
Scales the image to fit the selected paper size
Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width
Sets the image orientation
Portrait Landscape Rev Portrait Rev Landscape
Controls the printed size of each photo printed from a PictBridge‑enabled device
Auto L 2L Hagaki Postcard Card Size 100 x 150 mm 4 x 6 in 8 x 10 in Letter A4 A5 JIS B5

Understanding printer menus 159
Determines the maximum number of images that can print on one side of paper
Auto Off 2 Up 3 Up 4 Up 6 Up 9 Up 12 Up 16 Up Index Print
Determines which resolution, toner darkness, and color saver values the device uses when printing photos sent from a PictBridge‑enabled device
Identifies the printer default input source when printing photos from a PictBridge‑enabled device
MP Feeder Tray Manual Paper
View Date/Time Displays the time in YYYY‑MM‑DD HH:MM format
Instructs the printer to run the setup wizard

Understanding printer menus 160
Time Zone (North, Central, and South America)
Specifies the time zone for the fax
Hawaii * Alaska Tijuana (PST) USA/Canada PST USA/Canada MST USA/Canada CST USA/Canada EST Canada AST Caracas (VET) Newfoundland (NST) Brasilia (BRT)
Time Zone (Europe and Africa)
Specifies the time zone for the fax
Azores (AZOT) Praia (CVT) * GMT (*) Dublin, Ireland London (BST) Western Europe Central Europe Eastern Europe Cairo (EET) Pretoria (SAST) * Moscow (MSK)
Specifies the time zone for the fax
Jerusalem (IST) Abu Dhabi GIST)* Kabul (AFT) * Islamabad (PKT) * New Delhi (IST) * Kathmandu (NPT) * Astana (ALMT) * Yangon (MMT) * Bangkok (ICT) * Beijing (CST) * Seoul (KST) * Tokyo (JST) *
Menu item Description · Time Zone (Asia)

Understanding printer menus 161
Time Zone (Australia and the Pacific region)
Specifies the time zone for the fax
Australia WST Australia CST Darwin (CST) * Australia EST Queensland (EST) * Tasmania (EST) Wellington (NZST) Not Listed
Accommodates Daylight Savings Time changes
Lets the printer clock synchronize with the Network Time Protocol (NTP) server

Understanding printer messages 162
List of status and error messages
A USB drive was inserted into the printer while the printer was scanning. From the keypad, press 1 to open the drive after scanning, or press 2 to ignore the USB drive.
A USB drive was inserted into the printer while the printer was setting up a job (copy, fax, e‑mail, or FTP) or while in the menus. From the keypad, press 1 to release job resources and access the USB drive directly, or press 2 to ignore the USB drive and return to the job being set up.
Wait for the message to clear.
Wait for the message to clear.
A fax call is completed. Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
The printer configuration ID is invalid. Contact Customer Support.
The real‑time clock in the printer has a malfunctioning battery. This message appears until the real‑time clock battery is replaced.

Understanding printer messages 163
Close the upper and lower doors.
Replace the toner cartridge, and then wait for the message to clear.
A fax number is dialed. If the number is too long to fit on the screen, only the word Dialing appears. Wait for the message to clear.
The printer is receiving a code to update a file. Wait for the message to clear.
A fax that was sent or received is complete. Wait for the message to clear.
The fax failed to be sent. Wait for the message to clear.
Wait for the message to clear.
A file with a valid extension is detected, but the actual file type does not match the extension, or the file is corrupt.
The printer is in Hex Trace mode.
With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. This is used to help isolate the source of a print job problem.
To exit Hex Trace, turn the printer off, wait about 10 seconds, and then turn the printer on.
Replace the imaging kit, and then press to clear the message and continue printing.

Understanding printer messages 164
This message appears when using manual fax mode. Press to print a black only fax or to print a color fax.
Insert the specified tray into the printer.
The engine code is invalid. Contact Customer Support.
The network code is invalid. Contact Customer Support.
The LADP server information is present but the printer is unable to communicate with the server, or the communication ended before the return of the search results.
A fax number is dialed, but the fax line is busy. Wait for the message to clear.
Try one or more of the following:
Try one or more of the following:
If no paper is in the manual feeder, load a sheet, and then press to clear the message and continue printing. • Press to clear the message and continue printing.

Understanding printer messages 165
The printer needs maintenance. Call for service.
The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your system support person for help.
The analog phone line was not detected; the fax is disabled. Connect the printer to an analog phone line.
A fax number is dialed, but no connection is made. Wait for the message to clear.
The printer does not have a dial tone. Wait for the message to clear.
Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
This is the final warning message for the photoconductor kit. The photoconductor kit is near exhaustion. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server).
If the setting is On, then the printer stops printing. Press to select Continue. The printer continues to print until the photoconductor kit is completely exhausted. When the photoconductor kit is exhausted, replace it.

Understanding printer messages 166
The telephone attached to the printer is in use, or its handset is off the cradle.
1 Place the handset on the telephone cradle.
2 Press to send a black only fax or to send a color fax.
3 Enter the fax number.
The photo sent to the printer is larger than the current paper size. Press the arrow buttons until Closest photo size or Fit to page appears, and then press .
The printer is saving power while it waits for the next print job.
A job sent from a USB drive was not successfully received. Wait for the message to clear and then try sending the job again.
The printer is receiving a file that is a code update. Wait for the message to clear.
A PictBridge enabled device is connected, and the printer is reading data from the device. Wait for the message to clear.
The printer was reading information from a USB drive and encountered an error. The USB drive must be removed from the printer to clear the message.
The printer is ready to receive print jobs.

Understanding printer messages 167
The printer is receiving a fax. pXX represents the number of pages received. Wait for the message to clear.
The printer is offline while it configures settings. Wait for the message to clear.
Remove the paper from the ADF to clear the message and continue printing.
Check for and remove any packaging materials from the toner cartridges.
Remove the stack of paper from the standard exit bin.
Replace the toner cartridge, and then press to clear the message and continue printing.
This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server).
If the setting is On, then the printer stops printing. Press to select Continue and continue printing.
When the PC Kit Life Warning appears, order a new photoconductor kit.
The scan job exceeds the maximum number of pages. Press , and then press to cancel printing and clear the message.
An attempt to create a file on the USB drive failed.

Understanding printer messages 168
Try one or more of the following:
The ADF cover is open. The message clears when the cover is closed.
The printer is sending a fax. pXX represents the number of pages received. Wait for the message to clear.
Empty the standard exit bin to clear the message and continue printing.
Try one or more of the following:
Wait until the printer is not printing, and then load the paper tray or other source with the correct paper type and size.
Insert the specified tray into the printer.
Remove the unrecognized USB device.
Remove the unrecognized USB hub.
Remove the camera, and then change the mode to PictBridge. Reconnect the camera.

Understanding printer messages 169
A USB drive was inserted into the printer, and the port is disabled. Contact your system support person.
A recognized PictBridge‑compatible camera is attached to the printer.
The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional data.
Try one or more of the following:
Wait for the message to clear.
Insert the missing toner cartridge to clear the message and continue printing.
Replace the defective toner cartridge with a new one.
Replace the imaging kit.
Replace the unsupported toner cartridge with a supported one.
The printer paper size setting did not match the length of the paper that entered the printer.
Try one or more of the following:

Understanding printer messages 170
The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save and continue printing.
The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print job.
Try one or more of the following:
The printer does not have enough memory available to continue printing. You cannot press because of this.
Try one or more of the following:
The page is too complex to print. Press , and then press to cancel printing.
Replace the toner cartridge with a new one.
The printer has encountered a font error because a specific font may not be installed.
Try one or more of the following:
Press to clear the message and continue printing.

Understanding printer messages 171
Try one or more of the following:
Try one or more of the following:
The printer detects that a network port is installed, but cannot communicate with it. The printer disables all communication to the associated network interface.
Try one or more of the following:
Try one or more of the following:
Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:

Understanding printer messages 172
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove and re‑configure the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
Only options designed specifically for this printer are supported.
Try one or more of the following:
Replace the waste toner bottle. For more information, see “Replacing the waste toner bottle” on page 180.
Replace the waste toner bottle, and then press to clear the message and continue printing.
Press to clear the message and continue printing.
Replace the toner cartridge.

Understanding printer messages 173
The USB drive contains more than 150 files; only 150 files will be displayed.
1 Clear the paper path.
2 Press to clear the message and continue printing.
1 Clear the paper path.
2 Remove the jammed paper below the fuser.
3 Press to clear the message and continue printing.
1 Clear the paper path.
2 Remove the jammed paper from the fuser.
3 Press to clear the message and continue printing.
1 Clear the paper path.
2 Open the front door, and then remove the jammed paper.
3 Close the front door.
4 Press to clear the message and continue printing.
An unsupported paper size is jammed in the duplex unit.
1 Open the front door
2 Remove the jam.
3 Load the tray with the correct paper size.
4 Press to continue printing.

Understanding printer messages 174
1 Pull the tray out.
2 Remove the jammed paper.
3 Insert the tray.
If all jams are cleared, the printer resumes printing.
1 Clear the paper path.
2 Open the front door, and then remove the jammed paper.
3 Hold the fuser cover down, and then remove the jammed paper from inside the fuser.
4 Close the fuser cover, and then close the front door.
5 Press to clear the message and continue printing.
The scanner failed to feed one or more pages through the ADF.
1 Remove all pages from the ADF.
2 Flex and fan the pages.
3 Place the pages in the ADF.
4 Adjust the ADF guides.
5 From the printer control panel, press to start a black only job or to start a color job.
The scanner was instructed to scan using the ADF, but there is no paper in the ADF.
1 Flex and fan the pages.
2 Place the pages in the ADF.
3 Adjust the ADF guides.
4 From the printer control panel, press to start a black only job or to start a color job.
Close the scanner cover.

Understanding printer messages 175
This jam location may also be identified as 294.04 Duplex Sensor Off Jam, 294.05 Scan Sensor Off Jam, or 294.06 ADF Backfeed Jam. To clear this jam:
1 Remove all pages from the ADF.
2 Flex and fan the pages.
3 Place the pages in the ADF.
4 Adjust the ADF guides.
5 From the printer control panel, press to start a black only job or to start a color job.
This message indicates that the scanner has been disabled by the system support person.
This message indicates the printer identified a problem with the scanner and automatically disabled it.
1 Remove all pages from the ADF.
2 Turn the printer off.
3 Wait 15 seconds and then turn the printer on.
4 Place the document in the ADF.
5 Press to start a black only job or to start a color job.
Press down on the cyan toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on
Press down on the magenta toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on.
Press down on the yellow toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on

Understanding printer messages 176
Press down on the black toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on
The cyan toner cartridge needs maintenance. Call for service.
The magenta toner cartridge needs maintenance. Call for service.
The yellow toner cartridge needs maintenance. Call for service.
The black toner cartridge needs maintenance. Call for service.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Check all cable connections.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.

Maintaining the printer 177
Periodically, certain tasks are required to maintain optimum print quality.
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.
Do not expose supplies to:
A message appears on the display when a replacement supply item is needed or when maintenance is required.
You can check the status of printer supplies by printing a menu settings page:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Menu Settings Page appears, and then press .
1 Type the printer IP address into the address field of your Web browser.
2 Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Maintaining the printer 178
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.
When 88 Cyan Cartridge Low, 88 Magenta Cartridge Low, 88 Yellow Cartridge Low, or 88 Black Cartridge low appears, order a new cartridge.
When 88 Replace Cyan Cartridge, 88 Replace Magenta Cartridge, 88 Replace Yellow Cartridge, or 88 Replace Black Cartridge appears, you must replace the specified toner cartridge.

Part name Part number C540, C543, and X543 series C544, X544, and X546 series

Maintaining the printer 179

Part name Part number C540, C543, and X543 series C544, X544, and X546 series

When 82 Replace Waste Toner appears, order a replacement waste toner bottle. The waste toner bottle must be replaced when 82 Replace Waste Toner appears.
Part name Part number
Waste toner bottle C540X75G

Maintaining the printer 180
Replace the waste toner bottle when 82 Replace waste toner appears. The printer will not continue printing until the waste toner bottle is replaced.
1 Unpack the replacement waste toner bottle.
2 Grasp the front door at the side handholds, and then pull it toward you.

3 Open the top door.


Maintaining the printer 181
4 Remove the right side cover.

5 Press the green levers on each side of the waste toner bottle, and then remove it.

6 Place the waste toner bottle in the enclosed packaging.

Maintaining the printer 182
7 Insert the new waste toner bottle.

8 Replace the right side cover.

9 Close the top door.


Maintaining the printer 183
10 Close the front door.

Replace the black imaging kit when Replace Black Imaging Kit appears.
1 Grasp the front door at the side handholds, and then pull it toward you.


Maintaining the printer 184
2 Open the top door.

3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit.

4 Remove the right side cover.


Maintaining the printer 185
5 Press the green levers on each side of the waste toner bottle, and then remove it.

6 Lift the blue levers on the imaging kit, and then pull it toward you.

7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.


Maintaining the printer 186
8 Remove the yellow, cyan, and magenta developer units.

9 Unpack the replacement black imaging kit.
Leave the packaging on the black developer unit.
10 Gently shake the black developer unit side to side.
11 Remove the red shipping cover from the black developer unit.

12 Insert the black developer unit.


Maintaining the printer 187
13 Replace the yellow, cyan, and magenta developer units.

14 Place the used black imaging kit in the enclosed package.
15 Align and insert the imaging kit.

16 Rotate the blue levers down until the imaging kit drops into place.

Maintaining the printer 188
17 Replace the waste toner bottle.

18 Replace the right side cover.

19 Replace the toner cartridges.


Maintaining the printer 189
20 Close the top door.

21 Close the front door.

Replace the black and color imaging kit when Replace Color Imaging Kit appears.
1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Maintaining the printer 190

2 Open the top door.

3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit.


Maintaining the printer 191
4 Remove the right side cover.

5 Press the green levers on each side of the waste toner bottle, and remove it.

6 Lift the blue levers on the imaging kit, and then pull it toward you.

7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.

Maintaining the printer 192

8 Unpack the replacement black and color imaging kit.
Leave the packaging on the developer units.
9 Gently shake the yellow, cyan, magenta, and black developer units side to side.
10 Remove the red shipping cover from the yellow, cyan, magenta, and black developer units.

11 Insert the yellow, cyan, magenta, and black developer units.

12 Place the used black and color imaging kit in the enclosed package.

Maintaining the printer 193
13 Align and insert the imaging kit.

14 Replace the waste toner bottle.


Maintaining the printer 194
15 Replace the right side cover.

16 Replace the toner cartridges.

17 Close the top door.


Maintaining the printer 195
18 Close the front door.

Replace the specified toner cartridge (yellow, cyan, magenta, or black) when 88 Replace <color> Cartridge appears. The printer will not continue printing until the specified cartridge is replaced.
1 Make sure the printer is on and Ready or 88 Replace <color> Cartridge appears.
2 Unpack the new cartridge, and set it near the printer.
3 Open the top door.


Maintaining the printer 196
4 Remove the toner cartridge by lifting the handle, and then gently pulling away from the imaging kit.

5 Align the new toner cartridge, and then press down until it is all the way into the slot.


Maintaining the printer 197
6 Close the top door.

Replace a developer unit when a print quality defect occurs or when damage occurs to the printer.
1 Grasp the front door at the side handholds, and then pull it toward you to open it.


Maintaining the printer 198
2 Open the top door.

3 Remove the toner cartridges by lifting the handles and then gently pulling away from the imaging kit.

4 Remove the right side cover.


Maintaining the printer 199
5 Press the green levers on each side of the waste toner bottle, and then remove it.

6 Lift the blue levers on the imaging kit, and then pull it toward you.

7 Press down on the blue levers, grasp the handles on the sides, and then pull the imaging kit out.


Maintaining the printer 200
8 Remove the used developer unit.

9 Place the used developer in the enclosed package.
10 Unpack the replacement developer unit.
Leave the packaging on the developer unit.
11 Gently shake the developer unit side to side.
12 Remove the red shipping cover from the developer unit.

13 Insert the developer unit.


Maintaining the printer 201
14 Align and insert the imaging kit.

15 Replace the waste toner bottle.


Maintaining the printer 202
16 Replace the right side cover.

17 Replace the toner cartridges.

18 Close the top door.


Maintaining the printer 203
19 Close the front door.

1 Make sure that the printer is turned off and unplugged from the wall outlet.
2 Remove paper from the standard exit tray.
3 Dampen a clean, lint‑free cloth with water.
4 Wipe only the outside of the printer, making sure to include the standard exit tray.
5 Make sure the standard exit tray is dry before beginning a new print job.

Maintaining the printer 204
Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.
1 Slightly dampen a soft, lint-free cloth or paper towel with water.
2 Open the scanner cover.

1 White underside ADF cover
2 White underside scanner glass cover
3 Wipe the scanner glass until it is clean and dry.
4 Wipe the white underside of the scanner cover until it is clean and dry.
5 Close the scanner cover.
3 Scanner glass · 4 ADF glass

Maintaining the printer 205
The printer and options can be safely moved to another location by following these precautions:
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Finding advanced networking and administrator information
This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com
Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often referred to as the factory default settings.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Settings appears, and then press .
4 Press the arrow buttons until General Settings appears, and then press .
5 Press the arrow buttons until Factory Defaults appears, and then press .
6 Press the arrow buttons until Restore Now appears, and then press .
Submitting changes appears briefly.
7 Press , and then press until Ready appears.
The following factory default settings are restored:
If the printer is installed on a network, the Embedded Web Server is available for a range of functions:
Administrative support 206

To access the Embedded Web Server:
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click one of the tabs to access information about the printer, change settings, or view a report.
You can have the printer send you an e‑mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.
To set up e‑mail alerts:
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
2 Click Settings.
3 Under Other Settings, click E‑mail Alert Setup.
4 Select the items for notification and type in the e‑mail addresses that you want to receive e‑mail alerts.
5 Click Submit.
You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.
To view reports from a network printer:
1 Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer you can:
2 Click Reports, and then click the type of report you want to view.
Administrative support 207

Solving basic printer problems
If there are basic printer problems, or the printer is unresponsive, make sure:
Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.
The documents contain unavailable fonts.
1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon.
The Print dialog appears.
3 Select Print as image.
4 Click OK.
The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.
If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.
Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.
Troubleshooting 208

These are possible solutions. Try one or more of the following:
Make sure Ready or Power Saver appears on the display before sending a job to print. Press to return the printer to the Ready state.
Remove the stack of paper from the standard exit bin, and then press .
Load paper in the tray.
Print a network setup page and check that the status shows Connected. If the status is Not Connected, check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.
Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.
MAKE SURE YOU ARE USING A RECOMMENDED USB OR ETHERNET CABLE
For more information, visit the Lexmark Web site at www.lexmark.com.
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.
These are possible solutions. Try one or more of the following:
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Setup Menu appears, and then press .
4 Press the arrow buttons until Print Recovery appears, and then press .
Troubleshooting 209

5 Press the arrow buttons until Page Protect appears, and then press .
6 Press the arrow buttons until Off appears, and then press .
C HECK THE P APER T YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.
These are possible solutions. Try one or more of the following:
USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS
These are possible solutions. Try one or more of the following:
From the printer control panel Finishing menu, Print Properties, or the Print dialog, set Collate to On.
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.
Troubleshooting 210

Add printer memory.
Increase the Print Timeout value:
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Timeouts appears, and then press .
5 Press the arrow buttons until Print Timeout appears, and then press .
6 Press the arrow buttons until the desired value appears, and then press .
These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure there are no obstructions:
1 Open the scanner cover.
2 Remove any obstruction keeping the scanner unit open.
3 Close the scanner cover.
Troubleshooting 211


These are some examples of poor copy quality:
These are possible solutions. Try one or more of the following:
Clear any error messages.
When 88 Cartridge low appears or when the print becomes faded, replace the toner cartridge.
Clean the scanner glass with a clean, lint‑free cloth dampened with water.
Adjust the copy darkness setting.
Make sure the quality of the original document is satisfactory.
Troubleshooting 212

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
From the printer control panel, press the Content button until the light comes on next to Text or Text/Photo.
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the Paper Size setting matches the paper loaded in the tray.
If your scanner is not responding, then make sure:
Troubleshooting 213

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem with the scanner.
These are possible solutions. Try one or more of the following:
Make sure the network or USB cable is securely connected to the computer and the printer.
Turn off and then restart the computer.
These are possible solutions. Try one or more of the following:
Close all programs not being used.
Select a lower scan resolution.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Clean the scanner glass with a clean, lint‑free cloth dampened with water. For more information, see “Cleaning the scanner glass” on page 204.
Increase the resolution of the scan for a higher quality output.
Make sure the quality of the original document is satisfactory.
Troubleshooting 214

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
These are possible solutions. Try one or more of the following:
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure the network or USB cable is securely connected to the computer and the printer.
Contact your telecommunications company to verify that your telephone line is subscribed to the caller ID service.
If your region supports multiple caller ID patterns, you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2). The availability of these settings by way of the Fax menu depends on whether your country or region supports multiple caller ID patterns. Contact your telecommunications company to determine which pattern or switch setting to use.
Troubleshooting 215

These are possible solutions. Try one or more of the following:
Clear any error messages.
Make sure the printer is plugged in, the power is on, and Ready appears.
Make sure the cable connections for the following hardware are secure, if applicable:
1 Plug a telephone into the wall jack.
2 Listen for a dial tone.
3 If you do not hear a dial tone, then plug a different telephone into the wall jack.
4 If you still do not hear a dial tone, then plug a telephone into a different wall jack.
5 If you hear a dial tone, then connect the printer to that wall jack.
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.
Troubleshooting 216

To ensure the printer is working correctly, connect it directly to the telephone line. Disconnect any answering machines, computers with modems, or telephone line splitters.
Clear any jams, and then make sure that Ready appears.
Call Waiting can disrupt fax transmissions. Disable this feature before sending or receiving a fax. Call your telephone company to obtain the keypad sequence for temporarily disabling Call Waiting.
Voice Mail offered through your local telephone company may disrupt fax transmissions. To enable both Voice Mail and the printer to answer calls, you may want to consider adding a second telephone line for the printer.
1 Dial the fax number.
2 Scan the original document one page at a time.
These are possible solutions. Try one or more of the following:
Load paper in the tray.
The ring count delay sets the number of times the phone line rings before the printer answers. If you have extension phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then keep the Ring Delay setting at 4.
1 Type the printer IP address into the address field of your Web browser.
2 Click Settings.
3 Click Fax Settings.
4 Click Analog Fax Setup.
5 In the Rings to Answer box, enter the number of times you want the phone to ring before answering.
6 Click Submit.
Troubleshooting 217

88 <color> toner low appears when the toner is low.
These are possible solutions. Try one or more of the following:
From the printer control panel, press the Fax button to put the printer in Fax mode.
Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper left corner.
These are possible solutions. Try one or more of the following:
Ask the person who sent you the fax to:
When 88 <color> toner low appears or when you experience faded print, replace the cartridge(s).
Decrease the incoming fax transmission speed:
1 Type the printer IP address into the address field of your Web browser.
2 Click Configuration.
3 Click Fax Settings.
Troubleshooting 218

4 Click Analog Fax Setup.
5 In the Max Speed box, click on one of the following: 2400 4800 9600 14400 33600
6 Click Submit.
1 Type the printer IP address into the address field of your Web browser.
2 Click Configuration.
3 Click Fax Settings.
4 Click Analog Fax Setup.
5 Click the No Name Fax option.
This option blocks all incoming faxes that have a private caller ID or no fax station name.
6 In the Banned Fax List field, enter the phone numbers or fax station names of specific fax callers you want to block.
These are possible solutions. Try one or more of the following:
Turn the printer off, wait about 10 seconds, and then turn the printer on.
1 Turn the printer off.
2 Unplug the printer.
3 Check the connection between the option and the printer.
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or go to www.lexmark.com/publications to view the option instruction sheet.
Troubleshooting 219

From the computer you are printing from, select the option. For more information, see “Updating available options in the printer driver” on page 33.
M AKE SURE THE PAPER IS LOADED CORRECTLY
1 Open the paper tray.
2 Check for paper jams or misfeeds.
3 Make sure paper guides are aligned against the edges of the paper.
4 Make sure the paper tray closes properly.
5 Close the door.
Turn the printer off. Wait 10 seconds. Turn the printer back on.
C HECK THE MULTIPURPOSE FEEDER
Make sure the 650‑sheet duo drawer (multipurpose feeder) is installed properly.
Clear any jams in the multipurpose feeder.
Make sure:
Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.
Move the guides in the tray to the correct position for the size loaded.
Troubleshooting 220

If a service message appears, turn the printer off, wait about 10 seconds, and then turn the printer back on. If the error recurs, call for service.
Make sure the memory card is securely connected to the printer system board.
These are possible solutions. Try one or more of the following:
Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.
MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.
Move the guides in the tray to the correct positions for the paper size loaded.
The paper path is not clear. Clear jammed paper from the entire paper path, and then press .
In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1 Press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General settings appears, and then press .
4 Press the arrow buttons until Print Recovery appears, and then press .
Troubleshooting 221

5 Press the arrow buttons until Jam Recovery appears, and then press .
6 Press the arrow buttons until On or Auto appears, and then press .
The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, contact Customer Support. You may have a printer part that requires adjustment or replacement.
These are possible solutions. Try one or more of the following:
Remove the print cartridge and make sure the packing material is properly removed. Reinstall the print cartridge.
When 88 Cartridge low appears, order a new print cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.
Troubleshooting 222

These are possible solutions. Try one or more of the following:
Move the width and length guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
ABCDE
ABCDE ABCDE
The imaging kit may be defective.
If Black and color imaging kit life warning orBlack imaging kit life warning appears, replace the imaging kit.
ABCDE
ABCDE ABCDE
C HECK THE T ONER D ARKNESS SETTING
Select a lighter Toner Darkness setting:
Troubleshooting 223

ABCD ABCD ABCD
These are possible solutions. Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Size setting from the Paper menu.
These are possible solutions. Try one or more of the following:
Replace the defective toner cartridge.
Replace the imaging kit.
Troubleshooting 224

These are possible solutions. Try one or more of the following:
Make sure the Paper Type setting matches the paper loaded in the tray.
These are possible solutions. Try one or more of the following:
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
Avoid textured paper with rough finishes.
When 88 Cartridge low appears or when the print becomes faded, replace the print cartridge.
Replace the fuser.
Troubleshooting 225

R EPEATING MARKS OCCUR MULTIPLE TIMES ON A PAGE
Print the Print defects guide and match the defects to the marks on one of the vertical lines. Follow the instructions on the Print defects guide to determine the cause of the repeating defects.
C HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure you are using paper that meets the printer specifications.
These are possible solutions. Try one or more of the following:
The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .

4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Color Adjust appears, and then press .
Calibrating appears.
The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too low.
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .
4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then press .
6 Change the selected setting to a lower value, and then press .
Avoid textured paper with rough finishes.
Make sure the Paper Type setting matches the paper loaded in the tray.
Color Saver may be set to On.
When 88 <color> Cartridge Low appears, order a new cartridge.
Replace the toner cartridge.
Replace the imaging kit.
Troubleshooting 227

These are possible solutions. Try one or more of the following:
The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .
4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Color Adjust appears, and then press .
Calibrating appears.
The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too high.
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .
4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then press .
6 Change the selected setting to a lower value, and then press .
Replace the toner cartridge.
Troubleshooting 228

These are possible solutions. Try one or more of the following:
Remove the print cartridge and shake it from side to side to redistribute the toner, and then reinstall it.
Replace the used print cartridge with a new one. If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
These are possible solutions. Try one or more of the following:
Replace the imaging kit.
Contact Customer Support.
Troubleshooting 229

These are possible solutions. Try one or more of the following:
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray.
These are possible solutions. Try one or more of the following:
Replace the print cartridge.
Contact Customer Support.
Troubleshooting 230

Try one or more of the following:
Use only transparencies recommended by the printer manufacturer.
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel, check the Paper Type setting from the Paper menu.
ABCDE ABCDE ABCDE
Replace the black and color imaging kit.
Troubleshooting 231

This section helps answer some basic color‑related questions and describes how some of the features provided in the Quality menu can be used to solve typical color problems.
ABCDE ABCDE ABCDE ABCDE
Color has shifted outside of the appropriate area or has been superimposed over another color area. These are possible solutions. Try one or more of the following:
Remove and reinstall the toner cartridges.
The printer will automatically calibrate the colors whenever a new imaging kit is detected. If a toner cartridge is replaced, a manual alignment will need to be performed.
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .
4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Color Adjust appears, and then press .
Calibrating appears.
What is RGB color?
Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.
What is CMYK color?
Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.
Troubleshooting 232

How is color specified in a document to be printed?
Software programs typically specify document color using RGB or CMYK color combinations. Additionally, they allow users to modify the color of each object in a document. For more information, see the software program Help topics.
How does the printer know what color to print?
When a user prints a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.
Should I use PostScript or PCL emulation printer software? What settings should I use for the best color?
The PostScript driver is strongly recommended for best color quality. The default settings in the PostScript driver provide the preferred color quality for the majority of printouts.
Why doesn't the printed color match the color I see on the computer screen?
The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color‑matching problems, see the question, “How can I match a particular color (such as a corporate logo)?”
The printed page appears tinted. Can I adjust the color?
Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.
My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?
This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.
What is manual color correction?
When manual color correction is enabled, the printer employs user‑selected color conversion tables to process objects. However, Color Correction must be set to Manual, or no user‑defined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).
Troubleshooting 233

To manually apply a different color conversion table:
1 From the Quality menu, select Color Correction, and then select Manual.
2 From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.
Object type Color conversion tables
How can I match a particular color (such as a corporate logo)?
From the printer Quality menu, nine types of Color Samples sets are available. These are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.
By examining Color Samples sets, a user can identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to utilize the selected color conversion table for the particular object.
Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented.
Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist in which the software program or the computer operating system adjusts the RGB or CMYK combinations specified in the program through color management. The resulting printed color may not be an exact match of the Color Samples pages.

What are detailed Color Samples and how do I access them?
Detailed Color Samples sets are available only through the Embedded Web Server of a network printer. A detailed Color Samples set contains a range of shades (displayed as colored boxes) that are similar to a user‑defined RGB or CMYK value. The likeness of the colors in the set are dependent on the value entered in the RGB or CMYK Increment box.
To access a detailed Color Samples set from the Embedded Web Server:
1 Type the printer IP address into the address field of your Web browser.
2 Click Configuration.
3 Click Color Samples.
4 Click Detailed Options to narrow the set to one color range.
5 When the Detailed Options page appears, select a color conversion table.
6 Enter the RGB or CMYK color number.
7 Enter an Increment value from 1–255.
8 Click Print to print the detailed Color Samples set.
These are possible solutions. Try one or more of the following:
Make sure the printer and computer are turned on and connected to the same network.
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.
When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.
You need to know your printer model, type, and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.
In the U.S. or Canada, call 1‑800‑539‑6275. For other countries/regions, visit the Lexmark Web site at www.lexmark.com.
Troubleshooting 235

Product name:
Lexmark X543, X544, X544n, X544dn, X544dw, X544dtn, X546dtn
Machine type:
Model(s):
131, 133, 138, 332, 333, 336, 337, 352, 356, 382, 383, 386, 387, 392, 393, 396, 397
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit http://support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
© 2012 Lexmark International, Inc.
All rights reserved.
The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.
7525, 4989 · November 2012

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
ScanBack is a trademark of Lexmark International, Inc.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.
All other trademarks are the property of their respective owners.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000
Wireless‑equipped models contain the following modular component(s):
Lexmark Regulatory Type/Model LEX-M04-001, FCC ID: IYLLEXM04001; IC:2376A-M04001

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
1-meter average sound pressure, dBA
Values are subject to change. See www.lexmark.com for current values.
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.
Printing 48 dBA · Ready 32 dBA

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
This product contains mercury in the lamp (
Ambient temperature 15.6C° – 32.2C°
Shipping and storage temperature ‑40.0C° – 60.0C°
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
A laser notice label may be affixed to this printer as shown:

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.
NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.
FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.
VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.
ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.
VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.
FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.
ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.
FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.
危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。
危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Mode Description Power consumption (Watts)
Printing The product is generating hard‑copy output from electronic inputs. 540 W
Copying The product is generating hard‑copy output from hard‑copy original documents.
Scanning The product is scanning hard‑copy documents. 60 W
Ready The product is waiting for a print job. 50 W
Power Saver The product is in energy‑saving mode. 24 W
Off The product is plugged into a wall outlet, but the power switch is turned off. 0 W
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Factory default Power Saver Timeout for this product (in minutes): 110V = 45 minutes, 220V = 60 minutes
By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.
This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.
A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
See your user documentation in order to program this information into your fax machine.
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.
Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
This equipment uses CA11A telephone jacks.

Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.
Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.
Cet équipement utilise des prises de téléphone CA11A.
The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:
This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.

This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.
Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.
Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.
Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109 o 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.
Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.
Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.
En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.
Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.
Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb
Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.
Compliance is indicated by the CE marking.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.
Compliance is indicated by the CE marking.
Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
This product may be used in the countries indicated in the table below.
AT BE BG CH CY CZ DE DK EE
EL ES FI FR HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.
Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.
Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.
Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.
Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.
Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.
Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky
príslušné ustanovenia smernice 1999/5/ES.
Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS
This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”
Lexmark warrants that this product:
—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
—Is, during normal use, free from defects in material and workmanship
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.
To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.
The replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.
As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.
Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.
Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
Warranty service does not include repair of failures caused by:
—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.
Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.
The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.
The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.






Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.