EN
Lexmark logo
Official user manual

Lexmark 030

225 pages·4.9 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 030
Table of Contents 458 sections Contents · Safety information · Learning about the printer · Thank you for choosing this printer! · … ShowHide
Contentsp.2Safety informationp.6Learning about the printerp.8Thank you for choosing this printer!p.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.12Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configuration using the Embedded Web Serverp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Accessing the system boardp.22Installing a memory cardp.23Installing a flash memory or firmware cardp.26Installing an Internal Solutions Portp.27Installing a printer hard diskp.33Removing the printer hard diskp.35Installing optional traysp.37Order of installationp.37Installing a printer stand and optional trayp.37Installing 550-sheet traysp.43Attaching cablesp.49Verifying printer setupp.50Printing a menu settings pagep.50Printing a network setup pagep.50Setting up the printer softwarep.51Installing the printer softwarep.51Updating available options in the printer driverp.51Setting up wireless printingp.52Preparing to set up the printer on a wireless networkp.52Installing the printer on a wireless network (Windows)p.53Installing the printer on a wireless network (Macintosh)p.55Installing the printer on an Ethernet networkp.58Changing port settings after installing a new network Internal Solutions Portp.60Setting up serial printingp.62Minimizing your printer's environmental impactp.64Saving paper and tonerp.64Using recycled paperp.64Conserving suppliesp.64Saving energyp.65Using Eco-Modep.65Reducing printer noisep.65Adjusting Sleep Modep.66Using Hibernate Modep.67Adjusting the brightness of the displayp.67Recyclingp.68Recycling Lexmark productsp.68Recycling Lexmark packagingp.68Returning Lexmark cartridges for reuse or recyclingp.68Loading paper and specialty mediap.69Setting the paper size and typep.69Loading the standard or optional 550-sheet trayp.69Loading the multipurpose feederp.73Linking and unlinking traysp.76Linking traysp.76Unlinking traysp.76Creating a custom name for a paper typep.76Assigning a custom paper type namep.77Configuring a custom namep.77Paper and specialty media guidep.78Paper guidelinesp.78Paper characteristicsp.78Unacceptable paperp.79Selecting paperp.79Selecting preprinted forms and letterheadp.79Using recycled paper and other office papersp.79Storing paperp.80Supported paper sizes, types, and weightsp.81Supported paper sizesp.81Supported paper types and weightsp.83Printingp.84Printing a documentp.84Printing a documentp.84Printing in black and whitep.84Adjusting toner darknessp.84Printing from a mobile devicep.85Printing from a flash drivep.85Printing from a flash drivep.85Supported flash drives and file typesp.86Printing specialty documentsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Tips on using envelopesp.87Tips on using labelsp.88Tips on using card stockp.88Printing confidential and other held jobsp.89Storing print jobs in the printerp.89Printing information pagesp.89Printing a font sample listp.89Printing a directory listp.89Using Max Speed and Max Yieldp.90Canceling a print jobp.90Canceling a print job from the printer control panelp.90Canceling a print job from the computerp.91Understanding printer menusp.92Menus listp.92Supplies menup.93Paper menup.95Default Source menup.95Paper Size/Type menup.96Configure MP menup.99Substitute Size menup.99Paper Weight menup.99Paper Loading menup.101Custom Types menup.103Custom Names menup.103Universal Setup menup.103Reports menup.104Reports menup.104Network/Ports menup.105Active NIC menup.105Standard Network or Network [x] menusp.105Network Reports menup.107Network Card menup.107TCP/IP menup.108IPv6 menup.109Wireless menup.109AppleTalk menup.110Standard USB menup.111Parallel [x] menup.113Serial [x] menup.115SMTP Setup menup.117Security menup.119Miscellaneous Security Settings menup.119Confidential Print menup.119Disk Wiping menup.120Security Audit Log menup.121Set Date and Time menup.122Settings menup.123General Settings menup.123Flash Drive menup.130Setup menup.132Job Accounting menup.134Finishing menup.135Quality menup.137Utilities menup.140XPS menup.141PDF menup.141PostScript menup.141PCL Emul menup.142HTML menup.144Image menup.145Help menup.146Securing the memory before moving the printerp.147Statement of Volatilityp.147Erasing volatile memoryp.147Erasing non-volatile memoryp.148Erasing printer hard disk memoryp.148Configuring printer hard disk encryptionp.149Maintaining the printerp.150Cleaning the exterior of the printerp.150Cleaning the printhead lensesp.150Storing suppliesp.153Checking the status of suppliesp.153Checking the status of supplies from the printer control panelp.153Checking the status of supplies from a network computerp.154Ordering suppliesp.154Ordering toner cartridgesp.154Ordering imaging unitsp.154Ordering a fuser or a transfer modulep.155Ordering a waste toner bottlep.155Replacing Suppliesp.156Replacing an imaging unitp.156Replacing a toner cartridgep.158Replacing the waste toner bottlep.160Moving the printerp.162Before moving the printerp.162Moving the printer to another locationp.162Shipping the printerp.162Administrative supportp.163Finding advanced networking and administrator informationp.163Using the Embedded Web Serverp.163Checking the virtual displayp.163Checking the printer statusp.164Viewing reportsp.164Restoring factory default settingsp.164Clearing jamsp.165Avoiding jamsp.165Understanding jam numbers and locationsp.165200 paper jamp.167201 paper jamp.168203 paper jamp.169230 paper jamp.170231–239 paper jamsp.17024x paper jamp.171250 paper jamp.173Troubleshootingp.174Checking an unresponsive printerp.174Understanding printer messagesp.174Adjusting colorp.174An error has occurred with the USB drive. Please remove and reinsert drive.p.174Change [paper source] to [custom type name]p.174Change [paper source] to [custom type name] load [orientation]p.174Change [paper source] to [custom string]p.175Change [paper source] to [custom string] load [orientation]p.175Change [paper source] to [paper size] [paper type]p.175Change [paper source] to [paper size] [paper type] load [orientation]p.175Close [tray] doorp.175Close front or side doorp.175Disk corruptedp.176Disk near full. Securely clearing disk space.p.176Disk problemp.176Error reading USB drive. Remove USB.p.176Insert Tray [x]p.176Install Tray [x]p.176Load [src] with [custom type name]p.177Load [src] with [custom string]p.177Load [src] with [size]p.177Load [src] with [type] [size]p.177Load Manual Feeder with [custom type name]p.177Load Manual Feeder with [custom string]p.178Load Manual Feeder with [paper size]p.178Load Manual Feeder with [paper type] [paper size]p.178Paper changes neededp.178Remove paper from standard output binp.178Restore held jobs?p.178Some held jobs were not restoredp.179Supply needed to complete jobp.179Tray [x] paper size unsupportedp.179Unsupported diskp.17930.xx Missing [color] cartridge and/or [color] imaging unitp.17931.xx Missing or defective [color] cartridgep.17932.xx [color] cartridge part number unsupported by devicep.17934 Incorrect paper size, open [src]p.17935 Insufficient memory to support Resource Save featurep.18036 Printer service requiredp.18037 Insufficient memory to collate jobp.18037 Insufficient memory for Flash Memory Defragment operationp.18037 Insufficient memory, some held jobs will not be restoredp.18037 Insufficient memory, some Held Jobs were deletedp.18038 Memory fullp.18139 Complex page, some data may not have printedp.18151 Defective flash detectedp.18152 Not enough free space in flash memory for resourcesp.18153 Unformatted flash detectedp.18154 Serial option [x] errorp.18154 Standard network software errorp.18254 Network [x] software errorp.18255 Unsupported option in slot [x]p.18256 Parallel port [x] disabledp.18256 Serial port [x] disabledp.18256 Standard USB port disabledp.18256 Standard parallel port disabledp.18356 USB port [x] disabledp.18357 Configuration change, some held jobs were not restoredp.18358 Too many disks installedp.18358 Too many flash options installedp.18358 Too many trays attachedp.18458 Input config errorp.18461 Remove defective diskp.18462 Disk fullp.18480.xx Fuser near life warningp.18480.xx Fuser life warningp.18480.xx Replace fuserp.18580.xx Fuser missingp.18582.xx Replace waste toner bottlep.18582.xx Waste toner bottle nearly fullp.18583.xx Transfer module life warningp.18583.xx Transfer module missingp.18583.xx Replace transfer modulep.18584 Defective [color] imaging unitp.18584.xx [color] imaging unit nearly lowp.18684.xx [color] imaging unit lowp.18684.xx Replace [color] imaging unit and [color] cartridgep.18684 Unsupported [color] imaging unitp.18688.xx [color] cartridge nearly lowp.18688.xx [color] cartridge lowp.18688.2x Replace [color] cartridgep.1871565 Emulation error, load emulation optionp.187Solving printing problemsp.187Multiple-language PDF files do not printp.187Printer control panel display is blank or displays only diamondsp.187Error message about reading USB drive appearsp.187Print jobs do not printp.187Make sure there is no problem with your printerp.187Make sure the printer is ready to printp.187Check if a supply is missing or needs replacementp.187Check if the standard exit bin is fullp.188Check if the paper tray is emptyp.188Make sure the correct printer software is installedp.188Make sure the internal print server is working properlyp.188Make sure you are using a recommended USB, serial, or Ethernet cablep.188Make sure printer cables are securely connectedp.188Confidential and other held jobs do not printp.188Partial job, no job, or blank page printsp.188Make sure the printer has sufficient memoryp.189Print job takes longer than expectedp.189Reduce the complexity of the print jobp.189Turn off the Page Protect settingp.189Change the environmental settingsp.189Job prints from the wrong tray or on the wrong paperp.189Check the paper type and paper size settingsp.189Incorrect characters printp.189Make sure the printer is not in Hex Trace modep.189Tray linking does not workp.190Load the same size and type of paperp.190Use the same Paper Size and Paper Type settingsp.190Large jobs do not collatep.190Make sure Collate is set to Onp.190Reduce the complexity of the print jobp.190Make sure the printer has enough memoryp.190Unexpected page breaksp.190Increase the Print Timeout valuep.190Solving home screen applications problemsp.191An application error has occurredp.191Check the system log for relevant detailsp.191Contact customer supportp.191Solving option problemsp.191Option does not operate correctly or quits after it is installedp.191Reset the printerp.191Check to see if the option is connected to the printerp.191Make sure the option is installedp.191Make sure the option is available in the printer driverp.192Make sure the option is selectedp.192Paper tray problemsp.192Make sure the paper is loaded correctlyp.192Reset the printerp.192Make sure the paper tray is installed correctlyp.192Cannot detect flash memory cardp.192Cannot detect printer hard diskp.192Internal Solutions Port does not operate correctlyp.192Check the Internal Solutions Port (ISP) connectionsp.192Check the cablep.193Make sure the network software is configured correctlyp.193Internal print server does not operate correctlyp.193Check the print server connectionsp.193Make sure the network software is configured correctlyp.193Memory cardp.193USB/parallel interface card does not operate correctlyp.193Check the USB/parallel interface card connectionp.193Check the cablep.193Solving paper feed problemsp.194Paper frequently jamsp.194Check the paperp.194Make sure there is not too much paper in the paper trayp.194Check the paper guidesp.194The paper may have absorbed moisture due to high humidityp.194Paper jam message remains after jam is clearedp.194Check the paper pathp.194Jammed pages are not reprintedp.194Turn on Jam Recoveryp.194Solving print quality problemsp.195Characters have jagged or uneven edgesp.195Clipped imagesp.195Check the guidesp.195Check the paper size settingp.195Fine horizontal lines appear on color pagesp.195Gray backgroundp.196Check the Toner Darkness settingp.196The toner cartridge may be worn or defectivep.196Incorrect marginsp.196Check the paper guidesp.196Check the paper size settingp.196Light colored line, white line, or incorrectly colored line appears on printsp.197Make sure there is no defective toner cartridgep.197Make sure the imaging unit is not defectivep.197Make sure the transfer module is not defectivep.197Clean the printhead lensesp.197Paper curlp.197Check the paper type and weight settingsp.197Load paper from a fresh packagep.197Print irregularitiesp.198Load paper from a fresh packagep.198Check the paper type and weight settingsp.198Avoid textured paper with rough finishesp.198Make sure there is no defective toner cartridgep.198Make sure the transfer module is not defectivep.198Make sure the fuser is not defectivep.198Print is too darkp.199Check the darkness, brightness, and contrast settingsp.199Load paper from a fresh packagep.199Avoid textured paper with rough finishesp.199Check the Paper Type settingp.199Make sure there is no defective toner cartridgep.199Print is too lightp.200Check the darkness, brightness, and contrast settingsp.200Load paper from a fresh packagep.200Avoid textured paper with rough finishesp.200Check the Paper Type settingp.200Make sure the toner cartridge is not low on tonerp.200Make sure there is no defective toner cartridgep.201Printer is printing blank pagesp.201Make sure there is no packing material left on the toner or print cartridgep.201Make sure the toner or print cartridge is not low on tonerp.201Repeating defects appear on a pagep.201Shadow images appear on printsp.202Check the paper type and weight settingsp.202Make sure the imaging unit is not defectivep.202Make sure the toner cartridge is not low on tonerp.202Skewed printp.203Check the paper guidesp.203Check the paperp.203Solid color pagesp.203Make sure the imaging unit is installed correctly and is not defectivep.203Make sure the toner cartridges are installed correctly, are not defective and not low on tonerp.203Streaked horizontal lines appear on printsp.204Select another tray or feederp.204Make sure there is no worn, defective, or empty toner cartridgep.204Clear the paper path around the toner cartridgep.204Streaked vertical lines appear on printsp.204Select another tray or feederp.204Make sure there is no worn, defective, or empty toner cartridgep.205Clear the paper path around the toner cartridgep.205Make sure there is no toner in the paper pathp.205Toner fog or background shading appears on the pagep.205Toner rubs offp.205Toner specksp.205Transparency print quality is poorp.206Check the transparenciesp.206Check the paper type settingp.206Uneven print densityp.206Make sure there is no defective or worn toner cartridgep.206Make sure the imaging unit is not defectivep.206Solving color quality problemsp.206FAQ about color printingp.206Embedded Web Server does not openp.209Check the network connectionp.209Check the address entered in the Web browserp.210Temporarily disable Web proxy serversp.210Contacting customer supportp.210Noticesp.211Product informationp.211Edition noticep.211GOVERNMENT END USERSp.211Trademarksp.212Federal Communications Commission (FCC) compliance information statementp.213Modular component noticep.213Licensing noticesp.213Noise emission levelsp.213Waste from Electrical and Electronic Equipment (WEEE) directivep.214Product disposalp.214Static sensitivity noticep.214ENERGY STARp.214Temperature informationp.215Laser noticep.215Power consumptionp.215Product power consumptionp.215Sleep Modep.215Off modep.216Total energy usagep.216European Community (EC) directives conformityp.216Radio interference noticep.216Regulatory notices for wireless productsp.216Exposure to radio frequency radiationp.217Industry Canada (Canada)p.217Notice to users in the European Unionp.218Statement of Limited Warrantyp.219LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.222ADOBE SYSTEMS INCORPORATED NOTICEp.225Patent acknowledgmentp.225
Page 1 of the Lexmark 030 user manual — November 2012 www.lexmark.com
Page 1 · click to enlarge
Page 1

User's Guide

November 2012 www.lexmark.com

Machine type(s):

Model(s):

Page 2 of the Lexmark 030 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.6Learning about the printerp.8Thank you for choosing this printer!p.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.12Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configuration using the Embedded Web Serverp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Accessing the system boardp.22Installing a memory cardp.23Installing a flash memory or firmware cardp.26Installing an Internal Solutions Portp.27Installing a printer hard diskp.33Removing the printer hard diskp.35Installing optional traysp.37Order of installationp.37Installing a printer stand and optional trayp.37Installing 550-sheet traysp.43Attaching cablesp.49Verifying printer setupp.50Printing a menu settings pagep.50Printing a network setup pagep.50Setting up the printer softwarep.51Installing the printer softwarep.51Updating available options in the printer driverp.51Setting up wireless printingp.52Preparing to set up the printer on a wireless networkp.52Installing the printer on a wireless network (Windows)p.53Installing the printer on a wireless network (Macintosh)p.55Installing the printer on an Ethernet networkp.58Changing port settings after installing a new network Internal Solutions Portp.60Setting up serial printingp.62Minimizing your printer's environmental impactp.64Saving paper and tonerp.64Using recycled paperp.64Conserving suppliesp.64Saving energyp.65Using Eco-Modep.65Reducing printer noisep.65Adjusting Sleep Modep.66Using Hibernate Modep.67Adjusting the brightness of the displayp.67Recyclingp.68Recycling Lexmark productsp.68Recycling Lexmark packagingp.68Returning Lexmark cartridges for reuse or recyclingp.68Loading paper and specialty mediap.69Setting the paper size and typep.69Loading the standard or optional 550-sheet trayp.69Loading the multipurpose feederp.73Linking and unlinking traysp.76Linking traysp.76Unlinking traysp.76Creating a custom name for a paper typep.76Assigning a custom paper type namep.77Configuring a custom namep.77Paper and specialty media guidep.78Paper guidelinesp.78Paper characteristicsp.78Unacceptable paperp.79Selecting paperp.79Selecting preprinted forms and letterheadp.79Using recycled paper and other office papersp.79Storing paperp.80Supported paper sizes, types, and weightsp.81Supported paper sizesp.81Supported paper types and weightsp.83Printingp.84Printing a documentp.84Printing a documentp.84Printing in black and whitep.84Adjusting toner darknessp.84Printing from a mobile devicep.85Printing from a flash drivep.85Printing from a flash drivep.85Supported flash drives and file typesp.86Printing specialty documentsp.86Tips on using letterheadp.86Tips on using transparenciesp.87Tips on using envelopesp.87Tips on using labelsp.88Tips on using card stockp.88Printing confidential and other held jobsp.89Storing print jobs in the printerp.89Printing information pagesp.89Printing a font sample listp.89Printing a directory listp.89Using Max Speed and Max Yieldp.90Canceling a print jobp.90Canceling a print job from the printer control panelp.90Canceling a print job from the computerp.91Understanding printer menusp.92Menus listp.92Supplies menup.93Paper menup.95Default Source menup.95Paper Size/Type menup.96Configure MP menup.99Substitute Size menup.99Paper Weight menup.99Paper Loading menup.101Custom Types menup.103Custom Names menup.103Universal Setup menup.103Reports menup.104Reports menup.104Network/Ports menup.105Active NIC menup.105Standard Network or Network [x] menusp.105Network Reports menup.107Network Card menup.107TCP/IP menup.108IPv6 menup.109Wireless menup.109AppleTalk menup.110Standard USB menup.111Parallel [x] menup.113Serial [x] menup.115SMTP Setup menup.117Security menup.119Miscellaneous Security Settings menup.119Confidential Print menup.119Disk Wiping menup.120Security Audit Log menup.121Set Date and Time menup.122Settings menup.123General Settings menup.123Flash Drive menup.130Setup menup.132Job Accounting menup.134Finishing menup.135Quality menup.137Utilities menup.140XPS menup.141PDF menup.141PostScript menup.141PCL Emul menup.142HTML menup.144Image menup.145Help menup.146Securing the memory before moving the printerp.147Statement of Volatilityp.147Erasing volatile memoryp.147Erasing non-volatile memoryp.148Erasing printer hard disk memoryp.148Configuring printer hard disk encryptionp.149Maintaining the printerp.150Cleaning the exterior of the printerp.150Cleaning the printhead lensesp.150Storing suppliesp.153Checking the status of suppliesp.153Checking the status of supplies from the printer control panelp.153Checking the status of supplies from a network computerp.154Ordering suppliesp.154Ordering toner cartridgesp.154Ordering imaging unitsp.154Ordering a fuser or a transfer modulep.155Ordering a waste toner bottlep.155Replacing Suppliesp.156Replacing an imaging unitp.156Replacing a toner cartridgep.158Replacing the waste toner bottlep.160Moving the printerp.162Before moving the printerp.162Moving the printer to another locationp.162Shipping the printerp.162Administrative supportp.163Finding advanced networking and administrator informationp.163Using the Embedded Web Serverp.163Checking the virtual displayp.163Checking the printer statusp.164Viewing reportsp.164Restoring factory default settingsp.164Clearing jamsp.165Avoiding jamsp.165Understanding jam numbers and locationsp.165200 paper jamp.167201 paper jamp.168203 paper jamp.169230 paper jamp.170231–239 paper jamsp.17024x paper jamp.171250 paper jamp.173Troubleshootingp.174Checking an unresponsive printerp.174Understanding printer messagesp.174Adjusting colorp.174An error has occurred with the USB drive. Please remove and reinsert drive.p.174Change [paper source] to [custom type name]p.174Change [paper source] to [custom type name] load [orientation]p.174Change [paper source] to [custom string]p.175Change [paper source] to [custom string] load [orientation]p.175Change [paper source] to [paper size] [paper type]p.175Change [paper source] to [paper size] [paper type] load [orientation]p.175Close [tray] doorp.175Close front or side doorp.175Disk corruptedp.176Disk near full. Securely clearing disk space.p.176Disk problemp.176Error reading USB drive. Remove USB.p.176Insert Tray [x]p.176Install Tray [x]p.176Load [src] with [custom type name]p.177Load [src] with [custom string]p.177Load [src] with [size]p.177Load [src] with [type] [size]p.177Load Manual Feeder with [custom type name]p.177Load Manual Feeder with [custom string]p.178Load Manual Feeder with [paper size]p.178Load Manual Feeder with [paper type] [paper size]p.178Paper changes neededp.178Remove paper from standard output binp.178Restore held jobs?p.178Some held jobs were not restoredp.179Supply needed to complete jobp.179Tray [x] paper size unsupportedp.179Unsupported diskp.17930.xx Missing [color] cartridge and/or [color] imaging unitp.17931.xx Missing or defective [color] cartridgep.17932.xx [color] cartridge part number unsupported by devicep.17934 Incorrect paper size, open [src]p.17935 Insufficient memory to support Resource Save featurep.18036 Printer service requiredp.18037 Insufficient memory to collate jobp.18037 Insufficient memory for Flash Memory Defragment operationp.18037 Insufficient memory, some held jobs will not be restoredp.18037 Insufficient memory, some Held Jobs were deletedp.18038 Memory fullp.18139 Complex page, some data may not have printedp.18151 Defective flash detectedp.18152 Not enough free space in flash memory for resourcesp.18153 Unformatted flash detectedp.18154 Serial option [x] errorp.18154 Standard network software errorp.18254 Network [x] software errorp.18255 Unsupported option in slot [x]p.18256 Parallel port [x] disabledp.18256 Serial port [x] disabledp.18256 Standard USB port disabledp.18256 Standard parallel port disabledp.18356 USB port [x] disabledp.18357 Configuration change, some held jobs were not restoredp.18358 Too many disks installedp.18358 Too many flash options installedp.18358 Too many trays attachedp.18458 Input config errorp.18461 Remove defective diskp.18462 Disk fullp.18480.xx Fuser near life warningp.18480.xx Fuser life warningp.18480.xx Replace fuserp.18580.xx Fuser missingp.18582.xx Replace waste toner bottlep.18582.xx Waste toner bottle nearly fullp.18583.xx Transfer module life warningp.18583.xx Transfer module missingp.18583.xx Replace transfer modulep.18584 Defective [color] imaging unitp.18584.xx [color] imaging unit nearly lowp.18684.xx [color] imaging unit lowp.18684.xx Replace [color] imaging unit and [color] cartridgep.18684 Unsupported [color] imaging unitp.18688.xx [color] cartridge nearly lowp.18688.xx [color] cartridge lowp.18688.2x Replace [color] cartridgep.1871565 Emulation error, load emulation optionp.187Solving printing problemsp.187Multiple-language PDF files do not printp.187Printer control panel display is blank or displays only diamondsp.187Error message about reading USB drive appearsp.187Print jobs do not printp.187Make sure there is no problem with your printerp.187Make sure the printer is ready to printp.187Check if a supply is missing or needs replacementp.187Check if the standard exit bin is fullp.188Check if the paper tray is emptyp.188Make sure the correct printer software is installedp.188Make sure the internal print server is working properlyp.188Make sure you are using a recommended USB, serial, or Ethernet cablep.188Make sure printer cables are securely connectedp.188Confidential and other held jobs do not printp.188Partial job, no job, or blank page printsp.188Make sure the printer has sufficient memoryp.189Print job takes longer than expectedp.189Reduce the complexity of the print jobp.189Turn off the Page Protect settingp.189Change the environmental settingsp.189Job prints from the wrong tray or on the wrong paperp.189Check the paper type and paper size settingsp.189Incorrect characters printp.189Make sure the printer is not in Hex Trace modep.189Tray linking does not workp.190Load the same size and type of paperp.190Use the same Paper Size and Paper Type settingsp.190Large jobs do not collatep.190Make sure Collate is set to Onp.190Reduce the complexity of the print jobp.190Make sure the printer has enough memoryp.190Unexpected page breaksp.190Increase the Print Timeout valuep.190Solving home screen applications problemsp.191An application error has occurredp.191Check the system log for relevant detailsp.191Contact customer supportp.191Solving option problemsp.191Option does not operate correctly or quits after it is installedp.191Reset the printerp.191Check to see if the option is connected to the printerp.191Make sure the option is installedp.191Make sure the option is available in the printer driverp.192Make sure the option is selectedp.192Paper tray problemsp.192Make sure the paper is loaded correctlyp.192Reset the printerp.192Make sure the paper tray is installed correctlyp.192Cannot detect flash memory cardp.192Cannot detect printer hard diskp.192Internal Solutions Port does not operate correctlyp.192Check the Internal Solutions Port (ISP) connectionsp.192Check the cablep.193Make sure the network software is configured correctlyp.193Internal print server does not operate correctlyp.193Check the print server connectionsp.193Make sure the network software is configured correctlyp.193Memory cardp.193USB/parallel interface card does not operate correctlyp.193Check the USB/parallel interface card connectionp.193Check the cablep.193Solving paper feed problemsp.194Paper frequently jamsp.194Check the paperp.194Make sure there is not too much paper in the paper trayp.194Check the paper guidesp.194The paper may have absorbed moisture due to high humidityp.194Paper jam message remains after jam is clearedp.194Check the paper pathp.194Jammed pages are not reprintedp.194Turn on Jam Recoveryp.194Solving print quality problemsp.195Characters have jagged or uneven edgesp.195Clipped imagesp.195Check the guidesp.195Check the paper size settingp.195Fine horizontal lines appear on color pagesp.195Gray backgroundp.196Check the Toner Darkness settingp.196The toner cartridge may be worn or defectivep.196Incorrect marginsp.196Check the paper guidesp.196Check the paper size settingp.196Light colored line, white line, or incorrectly colored line appears on printsp.197Make sure there is no defective toner cartridgep.197Make sure the imaging unit is not defectivep.197Make sure the transfer module is not defectivep.197Clean the printhead lensesp.197Paper curlp.197Check the paper type and weight settingsp.197Load paper from a fresh packagep.197Print irregularitiesp.198Load paper from a fresh packagep.198Check the paper type and weight settingsp.198Avoid textured paper with rough finishesp.198Make sure there is no defective toner cartridgep.198Make sure the transfer module is not defectivep.198Make sure the fuser is not defectivep.198Print is too darkp.199Check the darkness, brightness, and contrast settingsp.199Load paper from a fresh packagep.199Avoid textured paper with rough finishesp.199Check the Paper Type settingp.199Make sure there is no defective toner cartridgep.199Print is too lightp.200Check the darkness, brightness, and contrast settingsp.200Load paper from a fresh packagep.200Avoid textured paper with rough finishesp.200Check the Paper Type settingp.200Make sure the toner cartridge is not low on tonerp.200Make sure there is no defective toner cartridgep.201Printer is printing blank pagesp.201Make sure there is no packing material left on the toner or print cartridgep.201Make sure the toner or print cartridge is not low on tonerp.201Repeating defects appear on a pagep.201Shadow images appear on printsp.202Check the paper type and weight settingsp.202Make sure the imaging unit is not defectivep.202Make sure the toner cartridge is not low on tonerp.202Skewed printp.203Check the paper guidesp.203Check the paperp.203Solid color pagesp.203Make sure the imaging unit is installed correctly and is not defectivep.203Make sure the toner cartridges are installed correctly, are not defective and not low on tonerp.203Streaked horizontal lines appear on printsp.204Select another tray or feederp.204Make sure there is no worn, defective, or empty toner cartridgep.204Clear the paper path around the toner cartridgep.204Streaked vertical lines appear on printsp.204Select another tray or feederp.204Make sure there is no worn, defective, or empty toner cartridgep.205Clear the paper path around the toner cartridgep.205Make sure there is no toner in the paper pathp.205Toner fog or background shading appears on the pagep.205Toner rubs offp.205Toner specksp.205Transparency print quality is poorp.206Check the transparenciesp.206Check the paper type settingp.206Uneven print densityp.206Make sure there is no defective or worn toner cartridgep.206Make sure the imaging unit is not defectivep.206Solving color quality problemsp.206FAQ about color printingp.206Embedded Web Server does not openp.209Check the network connectionp.209Check the address entered in the Web browserp.210Temporarily disable Web proxy serversp.210Contacting customer supportp.210Noticesp.211Product informationp.211Edition noticep.211GOVERNMENT END USERSp.211Trademarksp.212Federal Communications Commission (FCC) compliance information statementp.213Modular component noticep.213Licensing noticesp.213Noise emission levelsp.213Waste from Electrical and Electronic Equipment (WEEE) directivep.214Product disposalp.214Static sensitivity noticep.214ENERGY STARp.214Temperature informationp.215Laser noticep.215Power consumptionp.215Product power consumptionp.215Sleep Modep.215Off modep.216Total energy usagep.216European Community (EC) directives conformityp.216Radio interference noticep.216Regulatory notices for wireless productsp.216Exposure to radio frequency radiationp.217Industry Canada (Canada)p.217Notice to users in the European Unionp.218Statement of Limited Warrantyp.219LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTp.222ADOBE SYSTEMS INCORPORATED NOTICEp.225Patent acknowledgmentp.225
Page 6 of the Lexmark 030 user manual — Safety information
Page 6 · click to enlarge
Page 6

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off the optional drawer, and set it aside instead of trying to lift the drawer and printer at the same time.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Safety information 6

Page 7 of the Lexmark 030 user manual — Safety information
Page 7 · click to enlarge
Page 7

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

SAVE THESE INSTRUCTIONS.

Safety information 7

Page 8 of the Lexmark 030 user manual — Finding information about the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

Learning about the printer

Thank you for choosing this printer!

We've worked hard to make sure it will meet your needs.

To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and make sure you check the latest updates on our Web site.

We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the reason we do what we do, and your suggestions help us do it better.

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides may be available on the Software and Documentation CD. For more information, visit http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then look for Printer and Software Documentation under the Pubs folder. From the list of publications, click the Networking Guide link. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 9 of the Lexmark 030 user manual — Selecting a location for the printer
Page 9 · click to enlarge
Page 9

Learning about the printer 9

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark Support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them too. It is important to:

  • Set up the printer near a wall outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 10 of the Lexmark 030 user manual — Printer configurations
Page 10 · click to enlarge
Page 10

Learning about the printer 10

Lexmark 030 — Printer configurations diagram (page 10)
Fig. 1 · Printer configurations

1 385 mm (15.16 in.)

2609.6 mm (24.0 in.) 3100 mm (3.94 in.) 4100 mm (3.94 in.)

5 100 mm (3.94 in.)

Printer configurations

  • The printer stand is a cabinet that can be converted into a caster base.
  • If used with a printer stand, then the printer supports only one optional 550-sheet tray.
  • If used with a caster base, then the printer supports a maximum of three optional 550-sheet trays.
Page 11 of the Lexmark 030 user manual — Printer configurations
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Lexmark 030 — Printer configurations diagram (page 11)
Fig. 2 · Printer configurations
1Printer control panel 2Standard exit bin 3Multipurpose feeder 4Standard 150‑sheet tray 5Standard 250‑sheet tray 6‑8Optional 550‑sheet tray 9Caster base (converted from a printer stand) 10Printer stand
Lexmark 030 — Printer configurations diagram (page 11)
Fig. 3 · Printer configurations

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Page 12 of the Lexmark 030 user manual — Understanding the printer control panel
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Understanding the printer control panel

1 2 3 4 5

Lexmark 030 — Understanding the printer control panel diagram (page 12)
Fig. 4 · Understanding the printer control panel
ItemDescription 1DisplayShows the status of the printer 2HomeLets you navigate back to the home screen 3KeypadAllows you to enter numbers, letters, or symbols 4Sleep ModeEnables Sleep Mode Note: Touching the screen or any hard button presses will cause the printer to wake from Sleep Mode. 5USB portAllows the user to connect a USB flash drive to the printer Note: Only the front USB port supports flash drives. 6Indicator light• Off—The printer is off. • Blinking green—The printer is warming up, processing data, or printing. • Solid green—The printer is on, but idle. • Solid red—Operator intervention is needed. • Amber—The printer enters Sleep Mode or Hibernate Mode. 7Stop/CancelStops all printer activity Note: A list of options is displayed once Stopped appears on the display.
Lexmark 030 — Understanding the printer control panel diagram (page 12)
Fig. 5 · Understanding the printer control panel
Page 13 of the Lexmark 030 user manual — Understanding the home screen
Page 13 · click to enlarge
Page 13

Understanding the home screen 13

Understanding the home screen

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark 030 — Understanding the home screen diagram (page 13)
Fig. 6 · Understanding the home screen
Lexmark 030 — Understanding the home screen diagram (page 13)
Fig. 7 · Understanding the home screen

5 6 7 8

1 Change Language Change the primary language of the printer.

2 Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.

3 Held Jobs Display all current held jobs.

4 USB or USB Thumbdrive

View, select, or print photos and documents from a flash drive.

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Fuser missing or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Display a warning or error message whenever the printer requires intervention to continue processing.
  • Access the messages screen for more information on the message, and how to clear it.

8 Tips Open a context‑sensitive Help information on the touch screen.

Touch To

Page 14 of the Lexmark 030 user manual — Sample touch screen
Page 14 · click to enlarge
Page 14

Understanding the home screen 14

This may also appear on the home screen:

Search Held Jobs Search current held jobs.

Using the touch-screen buttons

Sample touch screen

1 2 3 4

Lexmark 030 — Sample touch screen diagram (page 14)
Fig. 8 · Sample touch screen
Lexmark 030 — Sample touch screen diagram (page 14)
Fig. 9 · Sample touch screen
Lexmark 030 — Sample touch screen diagram (page 14)
Fig. 10 · Sample touch screen
Lexmark 030 — Sample touch screen diagram (page 14)
Fig. 11 · Sample touch screen

5 6 7 8 9 10

Scroll up.

Delete the file you selected.

Scroll to the left.

Scroll to the right.

5 Right scroll increase

Scroll to another value in increasing order.

Show 6 more labels / short text on this page
Touch To · Touch To · 1 Up arrow · 2 Delete folder · 3 Left arrow · 4 Right arrow
Page 15 of the Lexmark 030 user manual — Other touch-screen buttons
Page 15 · click to enlarge
Page 15

Understanding the home screen 15

6 Left scroll decrease

Scroll to another value in decreasing order.

Scroll down.

Save a setting.

  • Cancel an action or a selection.
  • Cancel out a screen and return to the previous screen.

Navigate back to the previous screen.

Other touch-screen buttons

Exit from the current screen to the home screen.

Select or clear an item.

Show 8 more labels / short text on this page
Touch To · 7 Down arrow · 8 Accept · 9 Cancel · 10 Back · Touch To · Exit · Radio button
Page 16 of the Lexmark 030 user manual — Features
Page 16 · click to enlarge
Page 16

Understanding the home screen 16

Features

Menu trail line:

A menu trail line is located at the top of each menu screen. This feature acts as a trail, showing the path taken to arrive at the current menu. It gives the exact location within the menus.

Menus > Settings > Print Settings > Number of Copies

Number of Copies is not underlined since this is the current screen. If you touch an underlined word on the Number of Copies screen before the Number of Copies is set and saved, then the selection is not saved, and does not become the default setting.

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

Feature Description · Attendance message alert

Page 17 of the Lexmark 030 user manual — Accessing the Embedded Web Server
Page 17 · click to enlarge
Page 17

Setting up and using the home screen applications 17

Setting up and using the home screen applications

  • Your home screen, icons, and buttons may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only on select printer models.
  • There may be additional solutions and applications available for purchase.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

1 From the Embedded Web Server, click Settings > General Settings > Home screen customization.

A list of basic printer functions appears.

2 Select the check boxes to specify which icons appear on the printer home screen.

Cleared check box items are hidden.

3 Click Submit.

Page 18 of the Lexmark 030 user manual — Forms and Favorites
Page 18 · click to enlarge
Page 18

Setting up and using the home screen applications 18

Activating the home screen applications

For detailed information about configuring and using home screen applications, visit the Lexmark Web site at http://support.lexmark.com.

Background and Idle Screen

Lexmark 030 — Background and Idle Screen diagram (page 18)
Fig. 12 · Background and Idle Screen

The application lets you customize the background and idle screen of your printer home screen.

To change the background of the printer home screen using the printer control panel, do the following:

1 From the home screen, navigate to:

Change Background > select background to use

Forms and Favorites

Lexmark 030 — Forms and Favorites diagram (page 18)
Fig. 13 · Forms and Favorites

The application helps you simplify and streamline work processes by letting you quickly find and print frequently used online forms directly from the home screen. For example, you can print the latest version of a form exactly when you need it. This eliminates inventories of printed forms that can easily become outdated.

To configure Forms and Favorites, do the following:

1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > Forms and Favorites.

2 Define the bookmarks, and then customize the settings.

3 Click Apply.

To use the application, touch Forms and Favorites on the home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Icon Description · 2 Touch · Icon Description

Page 19 of the Lexmark 030 user manual — Remote Operator Panel
Page 19 · click to enlarge
Page 19

Setting up and using the home screen applications 19

Eco ‑ Settings

The application lets you easily manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Showroom

The application lets you create and display a customized slide show on the touch screen of your printer. You can specify how long each slide is displayed, and images can be loaded either from a flash drive or through the printer Embedded Web Server.

Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the printer.

To activate Remote Operator Panel, do the following:

1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > Remote Operator Panel.

2 Select the Enabled check box, and then customize the settings.

3 Click Apply.

To use Remote Operator Panel, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch VNC Applet.

Icon Description · Icon Description

Page 20 of the Lexmark 030 user manual — Importing a configuration
Page 20 · click to enlarge
Page 20

Setting up and using the home screen applications 20

Exporting and importing a configuration using the Embedded Web Server

You can export configuration settings into a text file that can then be imported and used to apply the settings to one or more additional printers.

Exporting a configuration

1 From the Embedded Web Server, click Settings or Configuration.

2 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.

3 From Installed Solutions, click the name of the application you want to configure.

4 Click Configure > Export.

5 Follow the instructions on the computer screen to save the configuration file, and then enter a unique file name or use the default name.

Importing a configuration

1 From the Embedded Web Server, click Settings or Configuration.

2 Click Device Solutions > Solutions (eSF), or click Embedded Solutions.

3 From Installed Solutions, click the name of the application you want to configure.

4 Click Configure > Import.

5 Browse to the saved configuration file, and then load or preview it.

Page 21 of the Lexmark 030 user manual — Available internal options
Page 21 · click to enlarge
Page 21

Additional printer setup 21

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

  • Memory cards – Printer memory – Flash memory – Fonts
  • Firmware cards – Bar Code – PrintCryption TM
  • Printer hard disk
  • Lexmark TM Internal Solutions Ports (ISP) – RS ‑ 232 ‑ C Serial ISP – Parallel 1284 ‑ B ISP – MarkNet TM N8250 802.11 b/g/n Wireless ISP – MarkNet N8130 10/100 Fiber ISP – MarkNet N8120 10/100/1000 Ethernet ISP
Page 22 of the Lexmark 030 user manual — Accessing the system board
Page 22 · click to enlarge
Page 22

Additional printer setup 22

Accessing the system board

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Remove the cover.

Lexmark 030 — Accessing the system board diagram (page 22)
Fig. 14 · Accessing the system board
Lexmark 030 — Accessing the system board diagram (page 22)
Fig. 15 · Accessing the system board

2 Turn the screws on the metal panel counterclockwise to remove them, and then pull the panel down.

Lexmark 030 — Accessing the system board diagram (page 22)
Fig. 16 · Accessing the system board

3 Use the following illustration to locate the appropriate connectors.

Lexmark 030 — Accessing the system board diagram (page 22)
Fig. 17 · Accessing the system board
Page 23 of the Lexmark 030 user manual — Installing a memory card
Page 23 · click to enlarge
Page 23

Additional printer setup 23

4 Reattach the metal panel.

Lexmark 030 — Installing a memory card diagram (page 23)
Fig. 18 · Installing a memory card
Lexmark 030 — Installing a memory card diagram (page 23)
Fig. 19 · Installing a memory card

b Turn the screws on the metal panel clockwise.

Lexmark 030 — Installing a memory card diagram (page 23)
Fig. 20 · Installing a memory card

5 Reattach the cover.

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 24 of the Lexmark 030 user manual — Installing a memory card
Page 24 · click to enlarge
Page 24

Additional printer setup 24

An optional memory card can be purchased separately and attached to the system board.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

  • This task requires a flathead screwdriver.
  • Do not unplug the fan cable upon opening the metal panel.

2 Unpack the memory card.

3 On the system board, open the memory card connector latches.

Page 25 of the Lexmark 030 user manual — Installing a memory card
Page 25 · click to enlarge
Page 25

Additional printer setup 25

4 Align the notches on the memory card to the ridges on the connector.

Lexmark 030 — Installing a memory card diagram (page 25)
Fig. 21 · Installing a memory card

5 Push the memory card straight into the connector until it clicks into place.

Lexmark 030 — Installing a memory card diagram (page 25)
Fig. 22 · Installing a memory card

6 Reattach the system board cover.

1 Notch · 2 Ridge

Page 26 of the Lexmark 030 user manual — Installing a flash memory or firmware card
Page 26 · click to enlarge
Page 26

Additional printer setup 26

Installing a flash memory or firmware card

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

  • This task requires a flathead screwdriver.
  • Do not unplug the fan cable upon opening the metal panel.

2 Unpack the card.

3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.

Lexmark 030 — Installing a flash memory or firmware card diagram (page 26)
Fig. 23 · Installing a flash memory or firmware card

1 Plastic pins · 2 Metal pins

Page 27 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 27 · click to enlarge
Page 27

Additional printer setup 27

4 Push the card firmly into place.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 27)
Fig. 24 · Installing an Internal Solutions Port
  • The entire length of the connector on the card must touch and be flush against the system board.
  • Be careful not to damage the connectors.

5 Reattach the system board cover.

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Remove the cover.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 27)
Fig. 25 · Installing an Internal Solutions Port
Lexmark 030 — Installing an Internal Solutions Port diagram (page 27)
Fig. 26 · Installing an Internal Solutions Port

2 Turn the screws on the metal panel counterclockwise to remove them, and then pull the panel down.

Page 28 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 28 · click to enlarge
Page 28

Additional printer setup 28

Lexmark 030 — Installing an Internal Solutions Port diagram (page 28)
Fig. 27 · Installing an Internal Solutions Port

3 Unplug the fan cable from its connector on the system board.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 28)
Fig. 28 · Installing an Internal Solutions Port

4 Unpack the ISP and Connectivity Installation Kit.

1 2 3 4 5

Lexmark 030 — Installing an Internal Solutions Port diagram (page 28)
Fig. 29 · Installing an Internal Solutions Port
Page 29 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 29 · click to enlarge
Page 29

Additional printer setup 29

5 Remove the old ISP cable.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 29)
Fig. 30 · Installing an Internal Solutions Port

6 Using a thumbscrew, attach the plastic mounting bracket to the back of the ISP.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 29)
Fig. 31 · Installing an Internal Solutions Port

7 Insert the ISP into the metal housing.

6 Metal housing · 7 ISP cable

Page 30 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 30 · click to enlarge
Page 30

Additional printer setup 30

Lexmark 030 — Installing an Internal Solutions Port diagram (page 30)
Fig. 32 · Installing an Internal Solutions Port

8 Attach the ISP to the metal housing using two thumbscrews.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 30)
Fig. 33 · Installing an Internal Solutions Port
Lexmark 030 — Installing an Internal Solutions Port diagram (page 30)
Fig. 34 · Installing an Internal Solutions Port

9 Route the new ISP cable through the opening of the metal panel.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 30)
Fig. 35 · Installing an Internal Solutions Port
Page 31 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 31 · click to enlarge
Page 31

Additional printer setup 31

10 Attach the ISP cable to the connector on the ISP.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 31)
Fig. 36 · Installing an Internal Solutions Port

11 Attach the ISP to the metal panel using three screws that came with the Connectivity Installation Kit.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 31)
Fig. 37 · Installing an Internal Solutions Port

12 Attach the ISP cable to the connector on the system board.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 31)
Fig. 38 · Installing an Internal Solutions Port
Page 32 of the Lexmark 030 user manual — Installing an Internal Solutions Port
Page 32 · click to enlarge
Page 32

Additional printer setup 32

13 Reconnect the fan cable to its connector on the system board.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 32)
Fig. 39 · Installing an Internal Solutions Port

14 Attach the ISP to the printer.

Lexmark 030 — Installing an Internal Solutions Port diagram (page 32)
Fig. 40 · Installing an Internal Solutions Port
Page 33 of the Lexmark 030 user manual — Installing a printer hard disk
Page 33 · click to enlarge
Page 33

Additional printer setup 33

15 Snap on the plastic cover over the metal housing.

Lexmark 030 — Installing a printer hard disk diagram (page 33)
Fig. 41 · Installing a printer hard disk

Installing a printer hard disk

The optional printer hard disk can be installed with or without a Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

  • This task requires a flathead screwdriver.
  • Do not unplug the fan cable upon opening the metal panel.

2 Unpack the printer hard disk.

Page 34 of the Lexmark 030 user manual — Installing a printer hard disk
Page 34 · click to enlarge
Page 34

Additional printer setup 34

3 Locate the appropriate connector on the system board.

Lexmark 030 — Installing a printer hard disk diagram (page 34)
Fig. 42 · Installing a printer hard disk

4 Align the standoffs of the printer hard disk to the holes on the system board, and then press on the printer hard disk until the standoffs are in place.

Lexmark 030 — Installing a printer hard disk diagram (page 34)
Fig. 43 · Installing a printer hard disk
Page 35 of the Lexmark 030 user manual — Removing the printer hard disk
Page 35 · click to enlarge
Page 35

Additional printer setup 35

5 Insert the plug of the printer hard disk interface cable into the receptacle of the system board.

Lexmark 030 — Removing the printer hard disk diagram (page 35)
Fig. 44 · Removing the printer hard disk

6 Reattach the system board cover.

Removing the printer hard disk

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

  • This task requires a flathead screwdriver.
Page 36 of the Lexmark 030 user manual — Removing the printer hard disk
Page 36 · click to enlarge
Page 36

Additional printer setup 36

  • Do not unplug the fan cable upon opening the metal panel.

2 Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

Lexmark 030 — Removing the printer hard disk diagram (page 36)
Fig. 45 · Removing the printer hard disk

3 Remove the printer hard disk.

Lexmark 030 — Removing the printer hard disk diagram (page 36)
Fig. 46 · Removing the printer hard disk

4 Reattach the system board cover.

Page 37 of the Lexmark 030 user manual — Installing a printer stand and optional tray
Page 37 · click to enlarge
Page 37

Additional printer setup 37

Installing optional trays

Order of installation

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Install the printer and any options you have purchased in the following order:

  • Printer stand
  • Optional 550 ‑ sheet trays
  • Printer

For more information on converting a printer stand to caster base, and installing a printer stand, caster base or optional 550-sheet tray, see the documentation that came with the printer option.

Installing a printer stand and optional tray

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 38 of the Lexmark 030 user manual — Installing optional trays
Page 38 · click to enlarge
Page 38

Additional printer setup 38

1 Unpack the optional tray and printer stand, and then remove all packing material.

Lexmark 030 — Installing optional trays diagram (page 38)
Fig. 47 · Installing optional trays

1 Optional 550-sheet tray

3 Brackets and screws

2 Turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

3 Attach the thumbscrews on top of the printer stand.

Lexmark 030 — Installing optional trays diagram (page 38)
Fig. 48 · Installing optional trays

2 Printer stand · 4 Thumbscrews

Page 39 of the Lexmark 030 user manual — Installing optional trays
Page 39 · click to enlarge
Page 39

Additional printer setup 39

4 Align the optional tray to the printer stand, then lower the printer to the tray.

Lexmark 030 — Installing optional trays diagram (page 39)
Fig. 49 · Installing optional trays

5 Lock the standard and optional trays together using the brackets that came with the optional tray. a Open the standard 250- and optional 550‑sheet tray.

Page 40 of the Lexmark 030 user manual — Installing optional trays
Page 40 · click to enlarge
Page 40

Additional printer setup 40

b Remove the screw from the 250‑sheet tray.

Lexmark 030 — Installing optional trays diagram (page 40)
Fig. 50 · Installing optional trays

c Place a bracket over the screw hole and secure it with the screw.

Lexmark 030 — Installing optional trays diagram (page 40)
Fig. 51 · Installing optional trays

d Close the trays.

6 Lock the optional 550‑sheet tray to the printer stand. a Open the optional 550‑sheet tray and remove the screw.

Lexmark 030 — Installing optional trays diagram (page 40)
Fig. 52 · Installing optional trays
Page 41 of the Lexmark 030 user manual — Installing optional trays
Page 41 · click to enlarge
Page 41

Additional printer setup 41

b Open the printer stand.

c Place a bracket over the screw hole and secure it with the screw.

Lexmark 030 — Installing optional trays diagram (page 41)
Fig. 53 · Installing optional trays

d Close the optional tray and printer stand.

7 Plug in the electrical connections between trays.

Lexmark 030 — Installing optional trays diagram (page 41)
Fig. 54 · Installing optional trays

8 Attach brackets to the back of the printer, optional tray, and printer stand.

1 Bracket to lock optional tray to printer

2 Bracket to lock optional tray to printer stand

Page 42 of the Lexmark 030 user manual — Installing optional trays
Page 42 · click to enlarge
Page 42

Additional printer setup 42

a Insert brackets on the slots located at the back of the optional tray and printer stand.

Lexmark 030 — Installing optional trays diagram (page 42)
Fig. 55 · Installing optional trays

b Secure the brackets with screws.

Lexmark 030 — Installing optional trays diagram (page 42)
Fig. 56 · Installing optional trays

c Insert brackets on the slots located at the back of the printer and optional tray.

Lexmark 030 — Installing optional trays diagram (page 42)
Fig. 57 · Installing optional trays
Page 43 of the Lexmark 030 user manual — Installing 550 ‑ sheet trays
Page 43 · click to enlarge
Page 43

Additional printer setup 43

d Secure the brackets with screws.

Lexmark 030 — Installing 550-sheet trays diagram (page 43)
Fig. 58 · Installing 550-sheet trays

9 Insert the bases on the slots at the sides of the printer stand and secure them with screws.

Lexmark 030 — Installing 550-sheet trays diagram (page 43)
Fig. 59 · Installing 550-sheet trays

10 Turn the printer back on.

11 Set the printer software to recognize the optional input source.

For more information, see “Updating available options in the printer driver” on page 51.

Installing 550 ‑ sheet trays

  • The printer supports a maximum of three optional 550 ‑ sheet trays.
Page 44 of the Lexmark 030 user manual — Installing 550-sheet trays
Page 44 · click to enlarge
Page 44

Additional printer setup 44

  • When installing three optional 550 ‑ sheet trays, use a printer stand converted into a caster base.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Unpack the optional tray and the printer stand, and then remove all packing material.

Lexmark 030 — Installing 550-sheet trays diagram (page 44)
Fig. 60 · Installing 550-sheet trays

1 Optional 550-sheet tray

3 Brackets and screws

2 Turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

3 Convert the printer stand into a caster base. a Remove the four screws inside the printer stand.

2 Printer stand · 4 Thumbscrews

Page 45 of the Lexmark 030 user manual — Installing 550-sheet trays
Page 45 · click to enlarge
Page 45

Additional printer setup 45

b Lift the upper portion of the printer stand, leaving the base.

Lexmark 030 — Installing 550-sheet trays diagram (page 45)
Fig. 61 · Installing 550-sheet trays

4 Attach the thumbscrews on the caster base.

Lexmark 030 — Installing 550-sheet trays diagram (page 45)
Fig. 62 · Installing 550-sheet trays
Page 46 of the Lexmark 030 user manual — Installing 550-sheet trays
Page 46 · click to enlarge
Page 46

Additional printer setup 46

5 Align the trays to the caster base, then lower the printer to the trays.

Lexmark 030 — Installing 550-sheet trays diagram (page 46)
Fig. 63 · Installing 550-sheet trays

6 Lock the standard and optional trays together using the brackets that came with the optional tray. a Open the standard 250- and optional 550‑sheet tray.

Page 47 of the Lexmark 030 user manual — Installing 550-sheet trays
Page 47 · click to enlarge
Page 47

Additional printer setup 47

b Remove the screw from the 250‑sheet tray.

Lexmark 030 — Installing 550-sheet trays diagram (page 47)
Fig. 64 · Installing 550-sheet trays

c Place a bracket over the screw hole and secure it with the screw.

Lexmark 030 — Installing 550-sheet trays diagram (page 47)
Fig. 65 · Installing 550-sheet trays

d Close the trays.

7 Lock the optional 550‑sheet trays together using the screws that came with the trays. a Remove the upper optional 550-sheet tray drawer. Leave the lower optional trays open.

Lexmark 030 — Installing 550-sheet trays diagram (page 47)
Fig. 66 · Installing 550-sheet trays
Page 48 of the Lexmark 030 user manual — Installing 550-sheet trays
Page 48 · click to enlarge
Page 48

Additional printer setup 48

b Reach into the lower optional tray and insert a screw, pushing it upward to the optional tray above it.

Lexmark 030 — Installing 550-sheet trays diagram (page 48)
Fig. 67 · Installing 550-sheet trays

8 Plug in the electrical connections between trays.

Lexmark 030 — Installing 550-sheet trays diagram (page 48)
Fig. 68 · Installing 550-sheet trays

9 Attach brackets to the back of the printer and optional trays. a Insert brackets on the slots located at the back of the optional trays.

Lexmark 030 — Installing 550-sheet trays diagram (page 48)
Fig. 69 · Installing 550-sheet trays

b Secure the brackets with screws.

Lexmark 030 — Installing 550-sheet trays diagram (page 48)
Fig. 70 · Installing 550-sheet trays
Page 49 of the Lexmark 030 user manual — Attaching cables
Page 49 · click to enlarge
Page 49

Additional printer setup 49

c Insert brackets on the slots located at the back of the printer and optional tray.

Lexmark 030 — Attaching cables diagram (page 49)
Fig. 71 · Attaching cables

d Secure the brackets with screws.

Lexmark 030 — Attaching cables diagram (page 49)
Fig. 72 · Attaching cables

10 Insert the bases on the slots at the sides of the caster base and secure them with screws.

Lexmark 030 — Attaching cables diagram (page 49)
Fig. 73 · Attaching cables

11 Turn the printer back on.

12 Set the printer software to recognize the optional input source.

For more information, see “Updating available options in the printer driver” on page 51.

Attaching cables

Page 50 of the Lexmark 030 user manual — Printing a network setup page
Page 50 · click to enlarge
Page 50

Additional printer setup 50

Connect the printer to the computer using a USB cable or Ethernet cable.

Be sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port
Lexmark 030 — Verifying printer setup diagram (page 50)
Fig. 74 · Verifying printer setup
Lexmark 030 — Verifying printer setup diagram (page 50)
Fig. 75 · Verifying printer setup

Verifying printer setup

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page, and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Page 51 of the Lexmark 030 user manual — For Windows users
Page 51 · click to enlarge
Page 51

Additional printer setup 51

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.
  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop.

3 Click Install, and then follow the instructions on the computer screen.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

a Click

Page 52 of the Lexmark 030 user manual — Preparing to set up the printer on a wireless network
Page 52 · click to enlarge
Page 52

Additional printer setup 52

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

Setting up wireless printing

Preparing to set up the printer on a wireless network

  • Make sure your access point (wireless router) is turned on and is working properly.
  • Do not connect the installation or network cables until prompted to do so by the setup software.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.

In Windows 8 · a Click

Page 53 of the Lexmark 030 user manual — Installing the printer on a wireless network (Windows)
Page 53 · click to enlarge
Page 53

Additional printer setup 53

  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Installing the printer on a wireless network (Windows)

Before installing the printer on a wireless network, make sure:

  • Your wireless network is set up and is working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Page 54 of the Lexmark 030 user manual — In Windows 7 or earlier
Page 54 · click to enlarge
Page 54

Additional printer setup 54

Lexmark 030 — Installing the printer on a wireless network (Windows) diagram (page 54)
Fig. 76 · Installing the printer on a wireless network (Window…
Lexmark 030 — Installing the printer on a wireless network (Windows) diagram (page 54)
Fig. 77 · Installing the printer on a wireless network (Window…
  • 2 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

3 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

4 Click Install, and then follow the instructions on the computer screen.

5 Select Wireless connection when asked to choose a connection type.

6 From the Wireless Configuration dialog, select Guided Setup (Recommended).

a Click

Page 55 of the Lexmark 030 user manual — Enter the printer information
Page 55 · click to enlarge
Page 55

Additional printer setup 55

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

8 Follow the instructions on the computer screen.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Lexmark 030 — Prepare to configure the printer diagram (page 55)
Fig. 78 · Prepare to configure the printer
Lexmark 030 — Prepare to configure the printer diagram (page 55)
Fig. 79 · Prepare to configure the printer

2 Locate the printer MAC address. a From the printer control panel, navigate to:

> Reports > > Network Setup Page > or

> Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC).

Enter the printer information

1 Access the AirPort options:

Page 56 of the Lexmark 030 user manual — Configure the printer for wireless access
Page 56 · click to enlarge
Page 56

Additional printer setup 56

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open a Web browser.

4 From the Bookmarks menu, select Show or Show All Bookmarks.

5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.

6 From the Embedded Web Server, navigate to the location of the wireless settings information.

Configure the printer for wireless access

1 Type the network name (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).

3 Select the type of security you want to use to protect the wireless network.

4 Enter the security information necessary for the printer to connect to the wireless network.

5 Click Submit.

6 Open the AirPort application on the computer:

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

7 From the Network pop‑up menu, select the name of the wireless network.

Page 57 of the Lexmark 030 user manual — Configure your computer to use the printer wirelessly
Page 57 · click to enlarge
Page 57

Additional printer setup 57

Configure your computer to use the printer wirelessly

To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.

1 Install a printer driver file on the computer: a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the installer package for the printer.

c Follow the instructions on the computer screen. d Select a destination, and then click Continue. e From the Easy Install screen, click Install.

f Type the user password, and then click OK. All necessary applications are installed in the computer. g Click Close when the installation is complete.

2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan
  • System Preferences > Print & Fax 2 Click + . 3 If necessary, click Add Printer or Scanner or Add Other Printer or Scanner . 4 Click the IP tab. 5 Type the IP address of the printer in the address field, and then click Add .

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, choose Add, and then click IP Printer. 4 Type the IP address of the printer in the address field, and then click Add. b For AppleTalk printing:

  • Make sure AppleTalk is activated on your printer.
  • This feature is supported only in Mac OS X version 10.5 or earlier.
Page 58 of the Lexmark 030 user manual — In Windows 7 or earlier
Page 58 · click to enlarge
Page 58

Additional printer setup 58

In Mac OS X version 10.5

1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

3 Click Install, and then follow the instructions on the computer screen.

a Click

Page 59 of the Lexmark 030 user manual — In Mac OS X version 10.4 or earlier
Page 59 · click to enlarge
Page 59

Additional printer setup 59

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when the installation is complete.

4 Add the printer. • For IP printing:

In Mac OS X version 10.5 or later

a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner. d Click the IP tab. e Type the printer IP address in the address field, and then click Add.

In Mac OS X version 10.4 or earlier

a From the Finder, navigate to:

Applications > Utilities b Double‑click Printer Setup Utility or Print Center.

c From the printer list, click Add, and then click IP Printer. d Type the scanner IP address in the address field, and then click Add. • For AppleTalk printing:

Page 60 of the Lexmark 030 user manual — For Windows users
Page 60 · click to enlarge
Page 60

Additional printer setup 60

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5 or earlier.

In Mac OS X version 10.5

a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

In Mac OS X version 10.4 or earlier

a From the Finder, navigate to:

Applications > Utilities b Double‑click Printer Setup Utility or Print Center.

c From the printer list, click Add. d Click Default Browser tab > More Printers. e From the first pop‑up menu, select AppleTalk.

f From the second pop‑up menu, select Local AppleTalk Zone. g Select the device from the list, and then click Add.

Changing port settings after installing a new network Internal Solutions Port

When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.

  • If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
  • If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes to your computer configurations.
  • If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network when you configure the printer to operate wirelessly. If the printer is connected to the Ethernet network, then the wireless configuration completes, but the wireless ISP is inactive. To activate the wireless ISP, disconnect the printer from the Ethernet network, turn off the printer, and then turn it back on.
  • Only one network connection is active at a time. To switch between Ethernet and wireless connection types, turn off the printer, connect the cable (to switch to an Ethernet connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on.

For Windows users

1 Open a Web browser, and then type the printer IP address in the address field.

Page 61 of the Lexmark 030 user manual — For Macintosh users
Page 61 · click to enlarge
Page 61

Additional printer setup 61

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Open the printers folder.

In Windows 8

From the Search charm, type Run and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 3 To select the printer that has changed, do either of the following:
  • Press and hold the printer, and then select Printer properties .
  • Right ‑ click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).

4 Click the Ports tab.

5 Select the port from the list, and then click Configure Port.

6 Type the new IP address in the “Printer Name or IP Address” field.

7 Click OK > Close.

For Macintosh users

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Add the printer. • For IP printing: a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c Click the IP tab. d Type the printer IP address in the address field, and then click Add. • For AppleTalk printing:

a Click

Page 62 of the Lexmark 030 user manual — In Windows 7 or earlier
Page 62 · click to enlarge
Page 62

Additional printer setup 62

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5. a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select the printer > Add

Setting up serial printing

Use serial printing to print when the computer is far from the printer or to print at a reduced speed.

After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer.

1 Set the parameters in the printer. a From the printer control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Save the modified settings, and then print a menu settings page.

2 Install the printer driver. a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the software installer package.

Wait for the installation dialog to appear. If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type D:\setup.exe. 3 Press Enter or click OK.

f From the Configure Printer Connection dialog, select a port.

1 Click

Page 63 of the Lexmark 030 user manual — In Windows 7 or earlier
Page 63 · click to enlarge
Page 63

Additional printer setup 63

g If the port is not in the list, then click Refresh, or navigate to:

Add port > select a port type > enter the necessary information > OK h Click Continue > Finish.

3 Set the COM port parameters.

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.

In Windows 8

From the Search charm, type run and then navigate to: Apps list > Run > type devmgmt.msc > OK

In Windows 7 or earlier

or click Start, and then click Run. 2 In the Start Search or Run dialog, type devmgmt.msc. 3 Press Enter or click OK. b Double‑click Ports (COM & LPT) to expand the list of available ports.

c Do either of the following:

  • Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
  • Right ‑ click the COM port where you attached the serial cable to your computer (example: COM1). d From the menu that appears, select Properties . e On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.

Check the serial heading of the menu settings page for the printer settings. f Click OK, and then close all the dialogs. g Print a test page to verify printer installation.

1 Click

Page 64 of the Lexmark 030 user manual — Check your first draft for accuracy
Page 64 · click to enlarge
Page 64

Minimizing your printer's environmental impact 64

Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see “Using Eco‑Mode” on page 65.

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser/LED printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 79.

Conserving supplies

Use both sides of the paper

If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper by selecting 2‑sided printing from the Print dialog or from the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature, which you can select from the Print dialog or from the Lexmark Toolbar to see how the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.
Page 65 of the Lexmark 030 user manual — Reducing printer noise
Page 65 · click to enlarge
Page 65

Minimizing your printer's environmental impact 65

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 165.

Print in black and white

To print all text and graphics using only the black toner cartridge, set the printer to Black Only. For more information, see “Printing in black and white” on page 84.

Use Max Speed or Max Yield settings

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting. For more information, see “Using Max Speed and Max Yield” on page 90.

Saving energy

Using Eco ‑ Mode

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > General Settings > Eco‑Mode > select a setting > Submit.

Off Use factory default settings for all settings associated with Eco‑Mode. This setting supports the performance specifications of your printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until it is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • When the printer enters Sleep mode, the printer control panel display and the standard exit bin lights are turned off.
  • If scanning is supported, the scanner lamps are activated only when a scan job is started.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

  • Paper
  • Enable the automatic duplex feature.
  • Turn off print log features.

Reducing printer noise

To select a Quiet Mode setting using the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

Choose To

Page 66 of the Lexmark 030 user manual — Using the printer control panel
Page 66 · click to enlarge
Page 66

Minimizing your printer's environmental impact 66

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > General Settings > Quiet Mode > select a setting > Submit.

Use factory default settings. This setting supports the performance specifications of your printer.

On Reduce printer noise.

  • Print jobs will process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.
  • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer. The fax is placed in standby mode.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer will ignore the Advance Start command.

Adjusting Sleep Mode

To save energy, you can decrease the number of minutes before the printer enters Sleep Mode.

Available settings range from 1–240 minutes. The factory default setting is 5 minutes.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > General Settings > Timeouts.

3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep Mode.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep Mode.

Choose To · Off · 3 Touch

Page 67 of the Lexmark 030 user manual — Using the printer control panel
Page 67 · click to enlarge
Page 67

Minimizing your printer's environmental impact 67

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > General Settings > Sleep Button Settings.

3 From the Press Sleep Button or Press and Hold Sleep Button drop‑down, select Hibernate.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings > Press Sleep Button or Press and Hold Sleep Button > Hibernate

Adjusting the brightness of the display

To save energy, or if you are have trouble reading your display, adjust the brightness of the display.

Available settings range from 20–100. The factory default setting is 100.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > General Settings

2 Touch the down arrow until Screen Brightness appears, and then select a setting.

2 Touch · 3 Touch

Page 68 of the Lexmark 030 user manual — Returning Lexmark cartridges for reuse or recycling
Page 68 · click to enlarge
Page 68

Minimizing your printer's environmental impact 68

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 69 of the Lexmark 030 user manual — Loading the standard or optional 550 ‑ sheet tray
Page 69 · click to enlarge
Page 69

Loading paper and specialty media 69

Loading paper and specialty media

Setting the paper size and type

The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except in the standard 150‑sheet tray (Tray 1) and in the multipurpose feeder. The Paper Size setting for Tray 1 is set manually via the wheel on the tray, while the Paper Size setting for the multipurpose feeder is set in the Paper Size menu.

From the home screen, navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Only Tray 1 has Plain Paper as the factory default Paper Type setting. Custom 2, 3, 4, 5, and 6 are the default settings for the other trays.

Loading the standard or optional 550 ‑ sheet tray

The printer has a standard 150‑sheet (Tray 1) and 250‑sheet tray (Tray 2), and it may have one or more optional 550‑sheet trays. All 550‑sheet trays support the same paper sizes and types.

1 Pull the tray out.

Lexmark 030 — Loading the standard or optional 550 ‑ sheet tray diagram (page 69)
Fig. 80 · Loading the standard or optional 550 ‑ sheet tray
Page 70 of the Lexmark 030 user manual — Loading paper and specialty media
Page 70 · click to enlarge
Page 70

Loading paper and specialty media 70

Lexmark 030 — Loading paper and specialty media diagram (page 70)
Fig. 81 · Loading paper and specialty media

2 Make sure to release the width guide lock at the rear of the tray. Squeeze and then slide the width guide to the correct position for the paper size you are loading.

Lexmark 030 — Loading paper and specialty media diagram (page 70)
Fig. 82 · Loading paper and specialty media
Page 71 of the Lexmark 030 user manual — Loading paper and specialty media
Page 71 · click to enlarge
Page 71

Loading paper and specialty media 71

3 Squeeze and then slide the length guide to the correct position for the paper size you are loading.

Lexmark 030 — Loading paper and specialty media diagram (page 71)
Fig. 83 · Loading paper and specialty media

4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the paper stack with the recommended print side faceup.

  • If the paper is longer than A4, then load it in short ‑ edge orientation.
  • If the paper is shorter than A4, then load it in long ‑ edge orientation.
  • Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams and possible printer damage.

Long‑edge orientation

Short‑edge orientation

Page 72 of the Lexmark 030 user manual — Loading paper and specialty media
Page 72 · click to enlarge
Page 72

Loading paper and specialty media 72

6 Adjust both the width and length guides to lightly touch the edge of the paper stack. Make sure the paper fits loosely in the tray, lies flat, and is not bent or wrinkled.

7 Turn the wheel clockwise to set the paper size.

Lexmark 030 — Loading paper and specialty media diagram (page 72)
Fig. 84 · Loading paper and specialty media

8 Lock the width guide.

Lexmark 030 — Loading paper and specialty media diagram (page 72)
Fig. 85 · Loading paper and specialty media
Page 73 of the Lexmark 030 user manual — Loading the multipurpose feeder
Page 73 · click to enlarge
Page 73

Loading paper and specialty media 73

9 Insert the tray.

10 From the printer control panel, verify the Paper Size and Paper Type for the tray based on the paper you loaded.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and envelopes. It can be used for single-page or manual printing, or as an additional tray.

The multipurpose feeder can hold approximately:

  • 50 sheets of 75 ‑ g/m 2 (20 ‑ lb) paper
  • 10 envelopes
  • 20 transparencies

1 Pull down the multipurpose feeder door.

Lexmark 030 — Loading the multipurpose feeder diagram (page 73)
Fig. 86 · Loading the multipurpose feeder
Page 74 of the Lexmark 030 user manual — Loading the multipurpose feeder
Page 74 · click to enlarge
Page 74

Loading paper and specialty media 74

2 Gently pull the extension until it is fully extended.

Lexmark 030 — Loading the multipurpose feeder diagram (page 74)
Fig. 87 · Loading the multipurpose feeder

3 Flex the sheets of paper or specialty media back and forth to loosen them. Do not fold or crease them. Straighten the edges on a level surface.

Lexmark 030 — Loading the multipurpose feeder diagram (page 74)
Fig. 88 · Loading the multipurpose feeder

4 Load the paper or specialty media. Slide the stack gently into the multipurpose feeder until it comes to a stop.

Page 75 of the Lexmark 030 user manual — Loading the multipurpose feeder
Page 75 · click to enlarge
Page 75

Loading paper and specialty media 75

  • Load A3 ‑ , A6 ‑ , 11x17, JIS B4 ‑ , Statement ‑ and legal ‑ size media in short ‑ edge orientation.
  • Load A4 ‑ , A5 ‑ , Exec ‑ , JIS B5 ‑ and letter ‑ size media in long ‑ edge orientation.
  • Load envelopes flap side up in short ‑ edge orientation.
  • Do not exceed the maximum amount of media that the multipurpose feeder can hold.
  • Load only one size and type of paper at a time.

Long‑edge orientation

Short‑edge orientation

5 Adjust the width guide to lightly touch the edge of the stack. Make sure the paper or specialty media fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

Lexmark 030 — Loading the multipurpose feeder diagram (page 75)
Fig. 89 · Loading the multipurpose feeder

6 From the printer control panel, set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) based on the paper or specialty media loaded.

Page 76 of the Lexmark 030 user manual — Creating a custom name for a paper type
Page 76 · click to enlarge
Page 76

Loading paper and specialty media 76

Linking and unlinking trays

Linking trays

Tray linking is useful for large print jobs or for printing multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except Tray 1 and the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.

Unlinking trays

Change one of the following tray settings:

  • Paper Type

Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type [x], or define your own custom name. • Paper Size

Load a different paper size to automatically change the Paper Size setting for a tray. Paper Size settings for the multipurpose feeder are not automatic; they must be set manually from the Paper Size menu.

Creating a custom name for a paper type

If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer.

1 Type the printer IP address into the address field of your Web browser.

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > Paper Menu > Custom Name > type a name > Submit.

3 Click Custom Types > select a paper type > Submit.

Page 77 of the Lexmark 030 user manual — Configuring a custom name
Page 77 · click to enlarge
Page 77

Loading paper and specialty media 77

Assigning a custom paper type name

1 From the home screen, navigate to:

> Paper Menu > Paper Size/Type

2 Select the tray number or MP Feeder Type.

3 Touch the left or right arrow until Custom Type [x] or another custom name appears.

Configuring a custom name

If the printer is on a network, then you can use the Embedded Web Server to define a name other than Custom Type [x] for each of the custom paper types loaded into the printer.

1 Type the printer IP address in the address field of your Web browser.

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > Paper Menu > Custom Types > select the custom name you want to configure > select a paper or specialty media type > Submit.

4 Touch

Page 78 of the Lexmark 030 user manual — Fiber content
Page 78 · click to enlarge
Page 78

Paper and specialty media guide 78

Paper and specialty media guide

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these factors before printing on them:

Weight

The printer trays and multipurpose feeder can automatically feed paper weights between 60–176 g/m2 (16–47‑lb) grain long paper. The 2100‑sheet tray can automatically feed paper weights up to 60–135 g/m2 (16–36‑lb) grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, and may cause jams.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–176 g/m2 (16–47‑lb) paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability, resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Page 79 of the Lexmark 030 user manual — Using recycled paper and other office papers
Page 79 · click to enlarge
Page 79

Paper and specialty media guide 79

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm (±0.9 in.), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms.
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough ‑ edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple ‑ part forms or documents

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

  • Use grain long for 60–90 ‑ g/m 2 (16–24 ‑ lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid paper with rough or heavily textured surfaces.
  • Use inks that are not affected by the resin in toner. Inks that are oxidation ‑ set or oil ‑ based generally meet these requirements; latex inks might not.
  • Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
  • When in doubt, contact your paper supplier.

Using recycled paper and other office papers

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser and LED (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket statement can be made that all recycled paper will feed well.

Page 80 of the Lexmark 030 user manual — Storing paper
Page 80 · click to enlarge
Page 80

Paper and specialty media guide 80

Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.

  • Low moisture content (4–5%)
  • Suitable smoothness (100–200 Sheffield units, or 140–350 Bendtsen units, European)
  • Note: Some much smoother papers (such as premium 24 lb laser and LED papers, 50–90 Sheffield units) and much rougher papers (such as premium cotton papers, 200–300 Sheffield units) have been engineered to work very well in laser and LED printers, despite surface texture. Before using these types of paper, consult your paper supplier.
  • Suitable sheet-to-sheet coefficient of friction (0.4–0.6)
  • Sufficient bending resistance in the direction of feed

Recycled paper, paper of lower weight (

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.
Page 81 of the Lexmark 030 user manual — Supported paper sizes
Page 81 · click to enlarge
Page 81

Paper and specialty media guide 81

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

For more information, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

Supported paper sizes

Lexmark 030 — Supported paper sizes diagram (page 81)
Fig. 90 · Supported paper sizes

A6 105 x 148 mm (4.13 x 5.83 in.)

1 Paper size is supported if printer is set to metric.

2 Paper size is supported if printer is set to US.

Page 82 of the Lexmark 030 user manual — Supported paper sizes, types, and weights
Page 82 · click to enlarge
Page 82

Paper and specialty media guide 82

Lexmark 030 — Supported paper sizes, types, and weights diagram (page 82)
Fig. 91 · Supported paper sizes, types, and weights

Oficio (México) 216 x 340 mm (8.5 x 13.4 in.)

64‑297 mm x 148‑432 m m (2.52‑11.69 x 5.83‑17.0 1 in.)

7 3/4 Envelope (Monarch) 98 x 191 mm (3.875 x 7.5 in.)

1 Paper size is supported if printer is set to metric.

2 Paper size is supported if printer is set to US.

Page 83 of the Lexmark 030 user manual — Supported paper types and weights
Page 83 · click to enlarge
Page 83

Paper and specialty media guide 83

Lexmark 030 — Supported paper types and weights diagram (page 83)
Fig. 92 · Supported paper types and weights

86 x 165 mm to 216 x 356 mm (3.375 x 6.50 in. to 8.5 x 14 in.)

1 Paper size is supported if printer is set to metric.

2 Paper size is supported if printer is set to US.

Supported paper types and weights

The printer engine supports 60–256 g/m2 (16–100 lb) paper weights. The duplex unit supports 64–128 g/m2 (17–34 lb) paper weights.

Lexmark 030 — Supported paper types and weights diagram (page 83)
Fig. 93 · Supported paper types and weights
  • Plain
  • Bond
  • Glossy
  • Heavy Glossy
  • Colored
  • Custom Type [x]
  • Letterhead
  • Light
  • Heavy
  • Preprinted
  • Recycled
Page 84 of the Lexmark 030 user manual — Adjusting toner darkness
Page 84 · click to enlarge
Page 84

Printing

Printing a document

Printing a document

1 From the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the print options pop‑up menus, adjust the settings, if necessary.

Printing in black and white

From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Print Mode > Black Only >

Adjusting toner darkness

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

Printing 84

Page 85 of the Lexmark 030 user manual — Printing from a flash drive
Page 85 · click to enlarge
Page 85

3 Adjust the toner darkness setting.

4 Click Submit.

Printing from a mobile device

For the list of supported mobile devices and to download a compatible mobile printing application, visit http://lexmark.com/mobile.

Printing from a flash drive

Printing from a flash drive

  • Before printing an encrypted PDF file, enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

Printing 85

Page 86 of the Lexmark 030 user manual — Tips on using letterhead
Page 86 · click to enlarge
Page 86
Lexmark 030 — Supported flash drives and file types diagram (page 86)
Fig. 94 · Supported flash drives and file types

2 From the printer control panel, touch the document you want to print.

3 Touch the arrows to increase the number of copies to print, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then you can still print files from the flash drive as held jobs.

Supported flash drives and file types

Flash drive File type

  • Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB sizes)
  • SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)

Documents:

  • .pdf
  • .xps

Images:

  • Hi ‑ Speed USB flash drives must support the Full ‑ Speed standard. Devices supporting only USB low ‑ speed capabilities are not supported.
  • USB flash drives must support the FAT ( File Allocation Tables ) system. Devices formatted with NTFS ( New Technology File System ) or any other file system are not supported.
  • .dcx
  • .gif
  • .JPEG
  • .jpg
  • .bmp
  • .pcx
  • .TIFF
  • .tif
  • .png

Printing specialty documents

Tips on using letterhead

  • Use letterhead designed specifically for laser/LED printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex the sheets to prevent them from sticking together.

Printing 86

Page 87 of the Lexmark 030 user manual — Tips on using envelopes
Page 87 · click to enlarge
Page 87
  • Page orientation is important when printing on letterhead.

Source Print side Paper orientation

Standard and optional trays (simplex printing) Preprinted letterhead design is placed faceup.

When feeding short edge, the top edge of the sheet with the logo is placed at the right side of the tray. When feeding long‑edge, the letter head should go to the rear of the printer.

Standard and optional trays (duplex printing) Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo is placed at the right side of the tray.

Multipurpose feeder (simplex printing) Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo should enter the multipurpose feeder first.

Multipurpose feeder (duplex printing) Preprinted letterhead design is placed faceup.

The top edge of the sheet with the logo should enter the multipurpose feeder last.

Tips on using transparencies

  • Print samples on the transparencies being considered for use before buying large quantities.
  • Feed transparencies from the standard tray or from the multipurpose feeder.
  • From the Paper menu, set the Paper Type to Transparency.
  • Use transparencies designed specifically for laser/LED printers. Transparencies must be able to withstand temperatures of 230°C (446°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, flex the stack to prevent sheets from sticking together.
  • We recommend Lexmark transparencies. For ordering information, see the Lexmark Web site at <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> .

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

  • Use envelopes designed specifically for laser/LED printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 220°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For best performance, use envelopes made from 90 g/m 2 (24 lb bond) paper or 25% cotton. All ‑ cotton envelopes must not exceed 70 g/m 2 (20 lb bond) weight.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way

Printing 87

Page 88 of the Lexmark 030 user manual — Tips on using card stock
Page 88 · click to enlarge
Page 88

– Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser/LED printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 210°C (410°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions.

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non ‑ oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

  • From the Paper menu, set the Paper Type to Card Stock.
  • Select the appropriate Paper Texture setting.

Printing 88

Page 89 of the Lexmark 030 user manual — Printing a directory list
Page 89 · click to enlarge
Page 89
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 220°C (446°F) without releasing hazardous emissions.
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing confidential and other held jobs

Storing print jobs in the printer

You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.

All print jobs that can be initiated by the user at the printer are called held jobs.

Print job type Description

Confidential Confidential lets you hold print jobs in the computer until you enter the PIN from the control panel.

Verify Verify lets you print one copy of a print job while the printer holds the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory once all copies are printed.

Reserve Reserve allows the printer to store print jobs for printing at a later time. The print jobs are held until deleted from the Help Jobs menu.

Repeat Repeat prints and stores print jobs in the printer memory for reprinting.

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or on the printer hard disk.

Printing 89

Page 90 of the Lexmark 030 user manual — Canceling a print job from the printer control panel
Page 90 · click to enlarge
Page 90

From the home screen, navigate to:

> Reports > Print Directory

Using Max Speed and Max Yield

The Max Speed and Max Yield settings let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting.

  • Max Speed —Prints in color unless black only is selected in the driver. Prints in black only if the black only driver setting is selected.
  • Max Yield —Switches from black to color based on the color content found on each page. Frequent color mode switching can result in slower printing if the content of pages is mixed.

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Configuration > Print Settings > Setup Menu.

3 From the Printer Usage list, select Max Speed or Max Yield.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Setup Menu

2 From the Printer Usage list, select Max Speed or Max Yield.

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Printing 90 · 3 Touch

Page 91 of the Lexmark 030 user manual — For Macintosh users
Page 91 · click to enlarge
Page 91

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 91 · In Windows 8 · a Click

Page 92 of the Lexmark 030 user manual — Understanding printer menus
Page 92 · click to enlarge
Page 92

Understanding printer menus 92

Understanding printer menus

Menus list

Supplies Paper Menu Reports Settings

Replace Supply Cyan Cartridge

Default Source Paper Size/Type

Menu Settings Page Device Statistics

General Settings Flash Drive Menu

Network [x] Setup Page

Black Imaging Unit Waste Toner Bottle

XPS Menu PDF Menu

Standard Network or Network [x]*

Set Date and Time

Information Guide Connection Guide

* Depending on the printer setup, this menu appears as Standard Network, Wireless Network, or Network [x].

Show 50 more labels / short text on this page
Magenta Cartridge · Configure MP · Network Setup Page · Print Settings · Yellow Cartridge · Substitute Size · Setup Menu · Black Cartridge · Paper Weight · Profiles List · Finishing Menu · Cyan Imaging Unit · Paper Loading · Print Fonts · Quality Menu · Magenta Imaging Unit · Custom Types · Print Directory · Job Accounting Menu · Yellow Imaging Unit · Custom Names · Asset Report · Utilities Menu · Universal Setup · Fuser · PostScript Menu · Transfer Module · PCL Emul Menu · Maintenance Kit · HTML Menu · Image Menu · Security Network/Ports Help · Miscellaneous Security Settings · Active NIC · Print All Guides · Confidential Print · Color Quality · Disk Wiping · Standard USB · Print Quality · Security Audit Log · Parallel [x] · Printing Guide · Serial [x] · Media Guide · SMTP Setup · Print Defects Guide · Menu Map · Moving Guide · Supplies Guide
Page 93 of the Lexmark 030 user manual — Supplies menu
Page 93 · click to enlarge
Page 93

Understanding printer menus 93

Supplies menu

Provides the option to reset the supply counter for the waste toner bottle

  • Select Yes to reset the supply counter.
  • Select No to exit.

Shows the status of the cyan toner cartridge

Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported

Shows the status of the magenta toner cartridge

Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported

Shows the status of the yellow toner cartridge

Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported

Show 6 more labels / short text on this page
Menu item Description · Replace Supply · Waste Toner Bottle · Cyan Cartridge · Magenta Cartridge · Yellow Cartridge
Page 94 of the Lexmark 030 user manual — Supplies menu
Page 94 · click to enlarge
Page 94

Understanding printer menus 94

Shows the status of the black toner cartridge

Early Warning Low Invalid Near End of Life Replace Missing Defective OK Unsupported

Shows the status of the cyan imaging unit

Early Warning Low Replace Missing OK

Shows the status of the magenta imaging unit

Early Warning Low Replace Missing OK

Shows the status of the yellow imaging unit

Early Warning Low Replace Missing OK

Shows the status of the black imaging unit

Early Warning Low Replace Missing OK

Shows the status of the waste toner bottle

Near Full Replace Missing OK

Show 7 more labels / short text on this page
Menu item Description · Black Cartridge · Cyan Imaging Unit · Magenta Imaging Unit · Yellow Imaging Unit · Black Imaging Unit · Waste Toner Bottle
Page 95 of the Lexmark 030 user manual — Default Source menu
Page 95 · click to enlarge
Page 95

Understanding printer menus 95

Shows the status of the fuser

Early Warning Low Replace Missing OK

Shows the status of the transfer module

Early Warning Low Replace Missing OK

Shows the status of the maintenance kit

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray [x] MP Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP feeder must be set to Cassette for MP feeder to appear as a menu setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
Show 7 more labels / short text on this page
Menu item Description · Fuser · Transfer module · Maintenance Kit · OK Replace · Menu item Description · Default Source
Page 96 of the Lexmark 030 user manual — Paper Size/Type menu
Page 96 · click to enlarge
Page 96

Understanding printer menus 96

Paper Size/Type menu

Specifies the paper size loaded in each tray

(LEF) Letter Legal JIS B4 A3 11 x 17 Universal (LEF) A4

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • For trays with automatic size sensing, only the size detected by the hardware appears.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Specifies the type of paper loaded in each tray

Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name appears instead of Custom Type [x].
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Menu item Description · Tray [x] Size · Tray [x] Type

Page 97 of the Lexmark 030 user manual — Paper Size/Type menu
Page 97 · click to enlarge
Page 97

Understanding printer menus 97

Specifies the paper size loaded in the multipurpose feeder

Letter Legal Executive JIS B4 A3 11 x 17 Oficio (México) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope A4 A5 A6 JIS B5

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • From the Paper menu, Configure MP Feeder must be set to Cassette for MP Feeder to appear as a menu setting.

Specifies the type of paper loaded in the multipurpose feeder

Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, Configure MP Feeder must be set to Cassette for MP Feeder to appear as a menu setting.

Menu item Description · MP Feeder Size · MP Feeder Type

Page 98 of the Lexmark 030 user manual — Paper Size/Type menu
Page 98 · click to enlarge
Page 98

Understanding printer menus 98

Specifies the size of the paper loaded manually

Letter Legal Executive JIS B4 A3 11 x 17 Oficio (México) Folio Statement Universal A4 A5 A6 JIS B5

Specifies the type of paper loaded manually

Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x]

Specifies the size of the envelope loaded manually

10 Envelope DL Envelope C5 Envelope B5 Envelope 7 3/4 Envelope 9 Envelope Other Envelope

Show 4 more labels / short text on this page
Menu item Description · Manual Paper Size · Manual Paper Type · Manual Envelope Size
Page 99 of the Lexmark 030 user manual — Paper Weight menu
Page 99 · click to enlarge
Page 99

Understanding printer menus 99

Specifies the type of envelope loaded manually

Envelope Rough Envelope Custom Type [x]

Configure MP menu

Determines when the printer selects paper from the multipurpose feeder

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.

Substitute Size menu

Substitutes a specified paper size if the requested paper size is not available

All Listed Off Statement/A5 Letter/A4 11 x 17/A3

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without a Change Paper message appearing.

Paper Weight menu

Specifies the relative weight of the plain paper loaded

Specifies the relative weight of the card stock loaded

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.
Show 12 more labels / short text on this page
Menu item Description · Manual Envelope Type · Menu item Description · Configure MP · Cassette Manual First · Menu item Description · Substitute Size · Menu item Description · Plain Weight · Normal Heavy Light · Card Stock Weight · Normal Heavy Light
Page 100 of the Lexmark 030 user manual — Configure MP menu
Page 100 · click to enlarge
Page 100

Understanding printer menus 100

Specifies the relative weight of the transparencies loaded

Specifies the relative weight of the recycled paper loaded

Specifies the relative weight of the glossy paper loaded

Specifies the relative weight of the glossy paper loaded

Specifies the relative weight of the labels loaded

Specifies the relative weight of vinyl labels loaded

Specifies the relative weight of the bond paper loaded

Specifies the relative weight of the envelopes loaded

Specifies the relative weight of the envelopes loaded

Specifies the relative weight of the letterhead loaded

Specifies the relative weight of the preprinted paper loaded

Show 23 more labels / short text on this page
Menu item Description · Transparency Weight · Normal Heavy Light · Recycled Weight · Normal Heavy Light · Glossy Weight · Normal Heavy Light · Heavy Glossy Weight · Heavy · Labels Weight · Normal Heavy Light · Vinyl Labels Weight · Normal Heavy Light · Bond Weight · Normal Heavy Light · Envelope Weight · Normal Heavy Light · Rough Envelope Weight · Heavy Light Normal · Letterhead Weight · Normal Heavy Light · Preprinted Weight · Normal Heavy Light
Page 101 of the Lexmark 030 user manual — Paper Loading menu
Page 101 · click to enlarge
Page 101

Understanding printer menus 101

Specifies the relative weight of the colored paper loaded

Specifies the relative weight of the paper loaded

Specifies the relative weight of the paper loaded

Specifies the relative weight of the cotton paper loaded

Specifies the relative weight of the custom paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Paper Loading menu

Determines whether 2‑sided printing occurs for all print jobs that specify Card Stock as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Recycled as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Glossy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Heavy Glossy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Labels as the paper type

  • Duplex sets the printer default to 2 ‑ sided printing for every print job unless 1 ‑ sided printing is selected from Print Properties.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including 1 ‑ sided print jobs.
Show 22 more labels / short text on this page
Menu item Description · Colored Weight · Normal Heavy Light · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Normal Heavy Light · Custom [x] Weight · Normal Heavy Light · Menu item Description · Card Stock Loading · Off Duplex · Recycled Loading · Off Duplex · Glossy Loading · Off Duplex · Heavy Glossy Loading · Off Duplex · Labels Loading · Off Duplex
Page 102 of the Lexmark 030 user manual — Paper Loading menu
Page 102 · click to enlarge
Page 102

Understanding printer menus 102

Determines whether 2‑sided printing occurs for all print jobs that specify Vinyl Labels as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Bond as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Letterhead as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Preprinted as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Colored as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Light as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Heavy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Rough or Cotton as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Custom [x] as the paper type

  • Off is the factory default setting.
  • Custom [x] Loading is available only if the custom paper type is supported.
  • Duplex sets the printer default to 2 ‑ sided printing for every print job unless 1 ‑ sided printing is selected from Print Properties.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including 1 ‑ sided print jobs.
Show 19 more labels / short text on this page
Menu item Description · Vinyl Labels Loading · Off Duplex · Bond Loading · Off Duplex · Letterhead Loading · Off Duplex · Preprinted Loading · Off Duplex · Colored Loading · Off Duplex · Light Loading · Off Duplex · Heavy Loading · Off Duplex · Rough/Cotton Loading · Off Duplex · Custom [x] Loading · Off Duplex
Page 103 of the Lexmark 030 user manual — Universal Setup menu
Page 103 · click to enlarge
Page 103

Understanding printer menus 103

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined Custom Name created from the Embedded Web Server or from MarkVisionTM Professional

Paper Card Stock Transparency Glossy Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Glossy Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Custom Names menu

Specify a custom name for a paper type. This name replaces the Custom Type [x] name in the printer menus.

Universal Setup menu

Identifies the unit of measure

Sets the portrait width

3–48 inches 76–1219 mm

  • 11.69 inches is the US factory default setting. Inches can be increased in 0.01 ‑ inch increments.
  • 296.9 mm is the international factory default setting. Millimeters can be increased in 1 ‑ mm increments.
  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
Show 10 more labels / short text on this page
Menu item Description · Custom Type [x] · Recycled · Menu item Definition · Custom Name [x] · [none] · Menu item Description · Units of Measure · Inches Millimeters · Portrait Width
Page 104 of the Lexmark 030 user manual — Reports menu
Page 104 · click to enlarge
Page 104

Understanding printer menus 104

Sets the portrait height

3–48 inches 76–1219 mm

  • 48 inches is the US factory default setting. Inches can be increased in 0.01 ‑ inch increments.
  • 1219 mm is the international factory default setting. Millimeters can be increased in 1 ‑ mm increments.
  • If the height exceeds the maximum, then the printer uses the maximum height allowed.

Specifies the feed direction

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only if the longest edge is shorter than the maximum width supported by the tray.

Reports menu

Reports menu

Menu Settings Page Prints a report containing information about the paper loaded into trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information

Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages

Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

Network [x] Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

  • This selection is available when more than one network option is installed.
  • This menu item appears only in network printers or in printers connected to print servers.

Profiles List Prints a list of profiles stored in the printer

Prints a report of all the fonts available for the printer language currently set in the printer

PCL Fonts PostScript Fonts

Show 5 more labels / short text on this page
Menu item Description · Portrait Height · Feed Direction · Menu item Description · Print Fonts
Page 105 of the Lexmark 030 user manual — Standard Network or Network [x] menus
Page 105 · click to enlarge
Page 105

Understanding printer menus 105

Print Directory Prints a list of all the resources stored on an optional flash memory card or printer hard disk

Asset Report Prints a report containing printer asset information, such as serial number and model name

Network/Ports menu

Active NIC menu

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only if an optional network card is installed.

Standard Network or Network [x] menus

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When Off is used, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Show 8 more labels / short text on this page
Menu item Description · Menu item Description · Active NIC · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off
Page 106 of the Lexmark 030 user manual — Network/Ports menu
Page 106 · click to enlarge
Page 106

Understanding printer menus 106

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the size of the network input buffer

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.
Show 8 more labels / short text on this page
Menu item Description · NPA Mode · Auto Off · Network Buffer · Job Buffering · Off On Auto · Mac Binary PS · Auto On Off
Page 107 of the Lexmark 030 user manual — UAA LAA
Page 107 · click to enlarge
Page 107

Understanding printer menus 107

Displays and sets the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Network Reports menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Reports or Network Reports

Print Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Network Card

Lets you view the connection status of the Network Card

View Card Speed Lets you view the speed of a currently active network card

Lets you view the network addresses

UAA LAA

Sets the amount of time in seconds before a network print job is canceled

Show 9 more labels / short text on this page
Menu item Description · Standard Network Setup · Network [x] Setup · Menu item Description · Menu item Description · View Card Status · Connected Disconnected · Network Address · Job Timeout
Page 108 of the Lexmark 030 user manual — TCP/IP menu
Page 108 · click to enlarge
Page 108

Understanding printer menus 108

Allows the printer to print a banner page

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > TCP/IP

Set Hostname Lets you set the current TCP/IP hostname

IP Address Lets you view or change the current TCP/IP address

Netmask Lets you view or change the current TCP/IP netmask

Gateway Lets you view or change the current TCP/IP gateway

Specifies the DHCP address and parameter assignment setting

Specifies the RARP address assignment setting

Specifies the BOOTP address assignment setting

Specifies the Zero Configuration Networking setting

Enables the built-in FTP server, which allows you to send files to the printer using File Transfer Protocol.

Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.

Show 20 more labels / short text on this page
Menu item Description · Banner Page · Off · On · Menu item Description · Activate · Activates TCP/IP · On Off · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No
Page 109 of the Lexmark 030 user manual — Wireless menu
Page 109 · click to enlarge
Page 109

Understanding printer menus 109

WINS Server Address Lets you view or change the current WINS server address

Lets you view or change the current DDNS setting

Lets you view or change the current mDNS setting

DNS Server Address Lets you view or change the current DNS server address

Lets you view or change the current HTTPS setting

IPv6 menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > IPv6

Enables IPv6 in the printer

Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router

Set Hostname Lets you set the hostname

Enables DHCPv6 in the printer

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

The Wireless menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Wireless

Show 15 more labels / short text on this page
Menu item Description · Enable DDNS · Yes No · Enable mDNS · Yes No · Enable HTTPS · Yes No · Menu item Description · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off
Page 110 of the Lexmark 030 user manual — AppleTalk menu
Page 110 · click to enlarge
Page 110

Understanding printer menus 110

WPS PBC Mode Lets you connect the printer to a wireless network by pressing buttons on both the printer and the access point (wireless router) within a given period of time

WPS PIN Mode Lets you connect the printer to a wireless network by using a PIN on the printer and entering it into the wireless settings of the access point

Automatically detects the connection method that an access point with WPS uses— WPS Push Button Configuration (PBC) or WPS Personal Identification Number (PIN)

Specifies the network mode

  • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer.
  • Infrastructure lets the printer access a network using an access point.

Specifies the wireless standard for the wireless network

802.11b/g/n 802.11n 802.11b/g

Lets you select an available network for the printer to use

[list of available networks]

View Signal Quality Lets you view the quality of the wireless connection

View Security Mode Lets you view the encryption method that a wireless network uses

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk

View Name Shows the assigned AppleTalk name

View Address Shows the assigned AppleTalk address

Show 11 more labels / short text on this page
Menu item Description · WPS Auto Detect · Disable Enable · Network Mode · Ad hoc Infrastructure · Compatibility · Choose Network · Menu item Description · Activate · Activates AppleTalk support · Yes No
Page 111 of the Lexmark 030 user manual — Standard USB menu
Page 111 · click to enlarge
Page 111

Understanding printer menus 111

Provides a list of AppleTalk zones available on the network

[default] [list of zones available on the network]

Standard USB menu

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 9 more labels / short text on this page
Menu item Description · Set Zone · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto On Off
Page 112 of the Lexmark 030 user manual — Standard USB menu
Page 112 · click to enlarge
Page 112

Understanding printer menus 112

Sets the size of the USB input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing. This menu only appears if a formatted printer hard disk is installed.

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

Sets the network address information for an external print server

yyy.yyy.yyy.yyy

Sets the netmask information for an external print server

yyy.yyy.yyy.yyy

Sets the gateway information for an external print server

yyy.yyy.yyy.yyy

Show 9 more labels / short text on this page
Menu item Description · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · Auto On Off · ENA Address · ENA Netmask · ENA Gateway
Page 113 of the Lexmark 030 user manual — Parallel [x] menu
Page 113 · click to enlarge
Page 113

Understanding printer menus 113

Parallel [x] menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the size of the parallel input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The parallel buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 8 more labels / short text on this page
Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto On Off · Parallel Buffer
Page 114 of the Lexmark 030 user manual — Parallel [x] menu
Page 114 · click to enlarge
Page 114

Understanding printer menus 114

Temporarily stores print jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Enables bidirectional communication through the parallel port

  • On is the factory default setting.
  • Off disables parallel port negotiation.

Specifies the parallel port protocol

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • Standard tries to resolve parallel port communication problems.

Determines if the printer honors printer hardware initialization requests from the computer

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determines if the parallel port data is sampled on the leading or trailing edge of a strobe

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Sets the network address information for an external print server

yyy.yyy.yyy.yyy

Sets the netmask information for an external print server

yyy.yyy.yyy.yyy

Show 15 more labels / short text on this page
Menu item Description · Job Buffering · Off On Auto · Advanced Status · On Off · Protocol · Fastbytes Standard · Honor Init · Off On · Parallel Mode 2 · On Off · Mac Binary PS · Auto On Off · ENA Address · ENA Netmask
Page 115 of the Lexmark 030 user manual — Serial [x] menu
Page 115 · click to enlarge
Page 115

Understanding printer menus 115

Sets the gateway information for an external print server

yyy.yyy.yyy.yyy

Serial [x] menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
  • When set to On, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When set to Off, the printer does not perform NPA processing.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 9 more labels / short text on this page
Menu item Description · ENA gateway · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto On Off
Page 116 of the Lexmark 030 user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 116 · click to enlarge
Page 116

Understanding printer menus 116

Sets the size of the serial input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing

  • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Selects the hardware and software handshaking settings for the serial port

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.

Determines whether the printer communicates availability to the computer

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.
Show 7 more labels / short text on this page
Menu item Description · Serial Buffer · Job Buffering · Off On Auto · Protocol · Robust XON · Off On
Page 117 of the Lexmark 030 user manual — SMTP Setup menu
Page 117 · click to enlarge
Page 117

Understanding printer menus 117

Specifies the rate at which data can be received through the serial port

9600 19200 38400 57600 115200 138200 172800 230400 345600 1200 2400 4800

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specifies the number of data bits sent in each transmission frame

Sets the parity for serial input and output data frames

None Ignore Even Odd

Determines whether the printer uses the DSR Signal

  • Off is the factory default setting.
  • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Primary SMTP Gateway Specifies SMTP server gateway and port information

Secondary SMTP Gateway Port

5–30 Specifies the amount of time in seconds before the server stops trying to send an e‑mail

Reply Address Specifies a reply address of up to 128 characters in the e-mail sent by the printer

Show 9 more labels / short text on this page
Menu item Description · Baud · Data Bits · Parity · Honor DSR · Off On · Menu item Description · Secondary SMTP Gateway · SMTP Timeout
Page 118 of the Lexmark 030 user manual — SMTP Setup menu
Page 118 · click to enlarge
Page 118

Understanding printer menus 118

Sets the printer to use SSL for increased security when connecting to the SMTP server

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specifies the type of user authentication required for scan to e‑mail privileges

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Device‑Initiated E‑mail

Specifies what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.

None Use Device SMTP Credentials

User‑Initiated E‑mail

  • None is the factory default setting for Device and User ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.

None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User

Show 8 more labels / short text on this page
Menu item Description · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device Userid · Device Password · Kerberos 5 Realm · NTLM Domain
Page 119 of the Lexmark 030 user manual — Confidential Print menu
Page 119 · click to enlarge
Page 119

Understanding printer menus 119

Security menu

Miscellaneous Security Settings menu

Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out

1–10 Failure time frame

  • “Login failures” specifies the number of failed login attempts before users are locked out. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. 5 minutes is the factory default setting.
  • Panel Login Timeout specifies how long the printer remains idle on the home screen before automatically logging the user off. 30 seconds is the factory default setting.
  • Remote Login Timeout specifies how long a remote interface (for example, a Web page) can remain idle before automatically logging the user off. 10 minutes is the factory default setting.

1–60 Panel Login Timeout

1–900 Remote Login Timeout

Confidential Print menu

Limits the number of times an invalid PIN can be entered

  • This menu appears only if a formatted, non-defective printer hard disk is installed.
  • Once the limit is reached, the print job for that user name and that PIN are deleted.

Limits the amount of time a confidential print job stays in the printer before it is deleted

Off 1 hour 4 hours 24 hours 1 week

  • If the Job Expiration setting is changed while confidential print jobs reside on the printer RAM or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in printer RAM are deleted.

Sets a time limit on how long the printer stores print jobs

Off 1 hour 4 hours 24 hours 1 week

Show 9 more labels / short text on this page
Menu item Description · Login Restriction · Login failures · 1–60 Lockout time · Menu item Description · Max Invalid PIN · Off 2–10 · Confidential Job Expiration · Repeat Job Expiration
Page 120 of the Lexmark 030 user manual — Disk Wiping menu
Page 120 · click to enlarge
Page 120

Understanding printer menus 120

Sets a time limit on how long the printer stores print jobs needing verification

Off 1 hour 4 hours 24 hours 1 week

Sets a time limit on how long the printer stores print jobs for printing at a later time

Off 1 hour 4 hours 24 hours 1 week

Disk Wiping menu

Disk Wiping erases only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Disk Wiping erases only print job data that is not currently in use by the file system from the printer hard disk. All permanent data on the printer hard disk is preserved, such as downloaded fonts, macros, and held jobs.

  • Auto is the factory default setting.
  • Due to the large amount of resources required for Automatic Wiping, activating this option may decrease printer performance, especially if the printer requires hard disk space faster than it can be wiped and returned to service.

Manual Wiping overwrites all disk space that has been used to hold data from a print job that has been processed (printed). This type of wipe does not erase any information related to an unprocessed print job.

Do not start now Start now

  • “Do not start now” is the factory default setting.
  • If the Disk Wiping access control is activated, then a user must successfully authenticate and have the required authorization in order to initiate the disk wipe.
Show 7 more labels / short text on this page
Menu item Description · Verify Job Expiration · Reserve Job Expiration · Menu item Description · Wiping Mode · Auto Manual Off · Manual Wiping
Page 121 of the Lexmark 030 user manual — Security Audit Log menu
Page 121 · click to enlarge
Page 121

Understanding printer menus 121

Automatic wiping marks all disk space used by a previous print job and does not permit the file system to reuse this space until it has been cleared.

Single pass Multiple pass

Only Automatic wiping enables users to activate disk wiping without having to turn the printer off for an extended amount of time.

  • “Single pass” is the factory default setting.
  • Highly confidential information should be wiped using only the Multiple pass method.

Both manual and scheduled wiping allow the file system to reuse marked disk space without having to wipe it first.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Highly confidential information should be wiped using only the Multiple pass method.

Both manual and scheduled wiping allow the file system to reuse marked disk space without having to wipe it first.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Highly confidential information should be wiped using only the Multiple Pass method .
  • Scheduled wipes are initiated without displaying a user warning or confirmation message.

Security Audit Log menu

Export Log Enables an authorized user to export the audit log

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • From the Embedded Web Server, the audit log can be downloaded to a computer.

Specifies whether audit logs are deleted

Show 7 more labels / short text on this page
Menu item Description · Automatic Method · Manual Method · Scheduled Method · Menu item Description · Delete Log · Yes No
Page 122 of the Lexmark 030 user manual — Set Date and Time menu
Page 122 · click to enlarge
Page 122

Understanding printer menus 122

Specifies whether and how audit logs are created

No Yes Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • With the security audit log activated, the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time Shows the current date and time settings for the printer

Manually Set Date and Time

  • Date and Time is set in YYYY-MM-DD HH:MM format.
  • Manually setting the date and time sets Enable NTP to Off.

[list of time zones]

Enables Network Time Protocol, which synchronizes the clocks of devices on a network

  • On is the factory default setting.
  • The setting is turned off if you manually set the date and time.
Show 10 more labels / short text on this page
Menu item Description · Configure Log · Enable Audit · Menu item Description · [input date/time] · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off
Page 123 of the Lexmark 030 user manual — General Settings menu
Page 123 · click to enlarge
Page 123

Understanding printer menus 123

Settings menu

General Settings menu

Sets the language of the text appearing on the display

English Francais Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimizes the use of energy, paper, or specialty media

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power, paper and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job by duplexing each page. Performance may be affected, but print quality is not.

Menu item Description · Display Language · Eco‑Mode

Page 124 of the Lexmark 030 user manual — Settings menu
Page 124 · click to enlarge
Page 124

Understanding printer menus 124

Reduces the amount of noise produced by the printer

  • Off is the factory default setting. This setting supports the performance specifications of your printer.
  • On configures the printer to produce as little noise as possible. This setting is best suited for printing text and line graphics.
  • For optimal printing of color ‑ rich documents, set Quiet Mode to Off.
  • Selecting Photo from the driver may disable Quiet Mode and provide better print quality and full speed printing.

Runs the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard, the default value becomes No.

Specifies a language for the printer control panel keyboard.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Custom Key 1

Show 7 more labels / short text on this page
Menu item Description · Quiet Mode · Off On · Run Initial setup · Yes No · Keyboard · Keyboard Type
Page 125 of the Lexmark 030 user manual — Settings menu
Page 125 · click to enlarge
Page 125

Understanding printer menus 125

Specifies the default paper measurement

  • The initial setting is determined by your country or region selection in the initial setup wizard.
  • Changing this setting also changes the default for each input source in the Paper Size/Type menu.
  • When set to Metric, the printer supports letter ‑ size and 11 x 17 paper in the standard 150 ‑ sheet tray and multipurpose feeder.

Specifies what is displayed on the upper left and right corners of the home screen

Left side Right side Custom Text [x] [x] Toner [x] Imaging Unit Fuser Transfer Module

For the Left side and Right side menus, select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

For the [x] Toner, [x] Imaging Unit, Fuser, and Transfer Module menus, select from the following options:

Do not display Display Message to Display

  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.
  • “Do not display” is the factory default setting for “When to display.”
  • Default is the factory default setting for Message to Display.
Show 8 more labels / short text on this page
Menu item Description · Paper Sizes · US Metric · Displayed Information · When to display · Default Alternate Default · [text entry] Alternate · [text entry]
Page 126 of the Lexmark 030 user manual — Settings menu
Page 126 · click to enlarge
Page 126

Understanding printer menus 126

Lets you customize the displayed information for Waste Toner Bottle, Paper Jam, Load Paper, and Service Errors

Waste Toner Bottle Paper Jam Load Paper Service Errors

Select from the following options:

No Yes Message to Display

  • No is the factory default setting for Display.
  • Default is the factory default setting for Message to Display.

Lets you add or remove icons and buttons that appear on the home screen

Change Language Search Held Jobs Held Jobs USB Drive Profiles and Solutions Bookmarks Jobs by user Forms and Favorites Eco‑Settings Showroom Change Background

Available options for each icon or button are:

Display Do Not Display

Specifies the format for the printer date

[MM‑DD‑YYYY] [DD‑MM‑YYYY] [YYYY‑MM‑DD]

Specifies the format for the printer time

12 hour 24 hour

20–100 Specifies the brightness of the printer control panel screen

Show 10 more labels / short text on this page
Menu item Description · Displayed Information · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization · Date Format · Time Format · Screen Brightness
Page 127 of the Lexmark 030 user manual — Settings menu
Page 127 · click to enlarge
Page 127

Understanding printer menus 127

Sets the audio volume for the buttons

  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Determines whether or not the Bookmarks icon is displayed

  • Yes is the factory default setting.
  • The Bookmarks icon appears inside Held Jobs. If Show Bookmarks is set to No, then the Held Jobs icon is only displayed on the home screen if one or more held jobs exist in the printer.

Web Page Refresh Rate

30–300 Specifies the number of seconds between Embedded Web Server refreshes

Contact Name Specifies a contact name for the printer

Location Specifies the location of the printer

Sets an alarm to sound when the printer requires user intervention

Alarm Control Cartridge Alarm

Available options for each alarm type are:

  • Single is the factory default setting for Alarm Control and Cartridge Alarm. Single sounds three quick beeps.
  • Continuous repeats three beeps every 10 seconds.
  • Off means no alarm will sound.

Specifies the number of minutes of inactivity before the system enters a lower power state

Show 12 more labels / short text on this page
Menu item Description · Audio Feedback · Button Feedback · On Off · Volume · Show Bookmarks · Yes No · Alarms · Single Continuous Off · Timeouts · Standby Mode · Disabled 1–240
Page 128 of the Lexmark 030 user manual — Settings menu
Page 128 · click to enlarge
Page 128

Understanding printer menus 128

Specifies the number of minutes of inactivity before some systems begin entering a minimum power state

  • 5 minutes is the factory default setting.
  • A lower setting conserves more energy, but may require longer warm ‑ up times.
  • Select the lowest setting if the printer shares an electrical circuit with room lighting.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm ‑ up time.
  • Sleep Mode does not interact with Standby Mode.

Sets the amount of time (in seconds) the printer waits before returning to a Ready state

Sets the amount of time (in seconds) the printer waits to receive an end‑of‑job message before canceling the remainder of the print job

  • 90 is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs.

Sets the amount of time (in seconds) the printer waits for additional data before canceling a print job

  • 40 is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs.

Sets the amount of time (in seconds) the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue

  • 30 is the factory default setting.
  • This menu appears only when a printer hard disk is installed.
Show 14 more labels / short text on this page
Menu item Description · Timeouts · Sleep Mode · Disabled 1–240 · Timeouts · Screen Timeout · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535 · Timeouts · Job Hold Timeout
Page 129 of the Lexmark 030 user manual — Settings menu
Page 129 · click to enlarge
Page 129

Understanding printer menus 129

Lets the printer handle print jobs even after the printer has gone offline within a specified time period.

Specifies whether the printer reprints jammed pages

  • Auto is the factory default setting. The printer reprints jammed pages if there is still enough memory to perform the task.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.

Determines how the printer, while in Idle state, reacts to a short press of the Sleep button

Sleep Hibernate Do Nothing

  • Sleep is the factory default setting for Press Sleep Button.
  • Sleep or Hibernate sets the printer to operate at a lower power configuration.
  • If the printer is in Sleep Mode, then the touch screen appears off and the Sleep button turns amber in color.
  • Touch anywhere on the touch screen or press a button on the printer control panel to exit Sleep Mode.
  • If the printer is in Hibernate mode, then the touch screen is completely off and the Sleep button turns amber in color and blinks.
Show 11 more labels / short text on this page
Menu item Description · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · Auto On Off · Print Recovery · Page Protect · Off On · Press Sleep Button
Page 130 of the Lexmark 030 user manual — Flash Drive menu
Page 130 · click to enlarge
Page 130

Understanding printer menus 130

Press and Hold Sleep Button

Determines how the printer while in Idle state, reacts to a long press of the Sleep button

Do Nothing Sleep Hibernate

  • Do Nothing is the factory default setting.
  • Sleep or Hibernate sets the printer to operate at a lower power configuration.
  • If the printer is in Sleep Mode, then the touch screen appears off and the Sleep button turns amber in color.
  • Press and hold the Sleep button for 3 seconds or longer to enter Hibernate mode.
  • Touch anywhere on the touch screen or press a button on the printer control panel to exit Sleep Mode.

Returns the printer settings to the factory default settings

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user ‑ defined settings.
  • Restore Now returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.

Flash Drive menu

1–999 Specifies a default number of copies for each print job

Sets a default paper source for all print jobs

Tray [x] MP Feeder Manual Paper Manual Envelope

Stacks the pages of a print job in sequence when printing multiple copies

On (1,2,1,2,1,2) Off (1,1,1,2,2,2)

Specifies whether prints are on one side or on both sides of the paper

1 sided 2 sided

Show 10 more labels / short text on this page
Menu item Description · Factory Defaults · Menu item Description · Copies · Paper Source · Color · Generates color outputs · Color Black Only · Collate · Sides (Duplex)
Page 131 of the Lexmark 030 user manual — Flash Drive menu
Page 131 · click to enlarge
Page 131

Understanding printer menus 131

Defines the way duplex pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting. Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specifies the orientation of a multiple‑page document

  • Auto is the factory default setting. The printer chooses between portrait and landscape.
  • This setting applies if Paper Saver in this menu is not set to Off.

Specifies that multiple‑page images be printed on one side of a paper

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Prints a border around each page image when using Paper Saver

  • None is the factory default setting.
  • This setting applies if Paper Saver in this menu is not set to Off.

Specifies the positioning of multiple‑page images when using Paper Saver

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.
  • This setting applies if Paper Saver in this menu is not set to Off.
Show 8 more labels / short text on this page
Menu item Description · Duplex Binding · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver · Paper Saver Border · None Solid · Paper Saver Ordering
Page 132 of the Lexmark 030 user manual — Setup menu
Page 132 · click to enlarge
Page 132

Understanding printer menus 132

Specifies whether blank separator sheets are inserted

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specifies the paper source for separator sheets

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Manual Feeder to appear as a menu setting.

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Setup menu

Sets the default printer language

PS Emulation PCL Emulation

  • PS Emulation is the factory default printer language.
  • Setting a printer language as the default does not prevent a software program from sending print jobs that use another printer language.

Specifies that print jobs be removed from the print queue if they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information and/or options are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu appears only when a non-read ‑ only printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.
Show 8 more labels / short text on this page
Menu item Description · Separator Sheets · Separator Sheet Source · Blank Pages · Menu item Description · Printer Language · Job Waiting · Off On
Page 133 of the Lexmark 030 user manual — Setup menu
Page 133 · click to enlarge
Page 133

Understanding printer menus 133

Sets the logical and physical printable area

  • Normal is the factory default setting. When attempting to print data in the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary. Whole Page only affects pages printed using a PCL 5e interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreter.

Sets color toner use in printing

Max Speed Max Yield

  • Max Speed is the default printer setting.
  • The printer driver is capable of overriding this setting

Sets the printer to print text and graphics using only the black print cartridge

Sets the storage location for downloads

  • RAM is the factory default setting. Storing downloads in RAM is temporary.
  • Storing downloads in flash memory or on a printer hard disk places them in permanent storage. Downloads remain in flash memory or on the printer hard disk even when the printer is turned off.
  • This menu appears only when a flash and/or disk option is installed.

Specifies how the printer handles temporary downloads, such as fonts and macros stored in RAM, when the printer receives a job that requires more memory than is available

  • Off is the factory default setting. Off sets the printer to retain the downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On retains the downloads during language changes and printer resets. If the printer runs out of memory, then 38 Memory Full appears, and downloads are not deleted.

Specifies the order in which held and confidential jobs are printed when Print All is selected

Alphabetical Oldest First Newest First

Show 11 more labels / short text on this page
Menu item Description · Print Area · Normal Whole Page · Printer Usage · Black Only Mode · Off On · Download Target · RAM Flash Disk · Resource Save · Off On · Print All Order
Page 134 of the Lexmark 030 user manual — Job Accounting menu
Page 134 · click to enlarge
Page 134

Understanding printer menus 134

Job Accounting menu

Determines if the printer creates a log of the print jobs it receives

Job Accounting Utilities Lets you print and delete log files or export them to a flash drive

Determines how often a log file is created

Log Action at End of Frequency

Determines how the printer responds when the frequency threshold expires

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Disk Near Full Level

Specifies the maximum size of the log file before the printer executes the Disk Near Full Action

Disk Near Full Action

Determines how the printer responds when the printer hard disk is nearly full

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Disk Near Full Level determines when this action is triggered.

Determines how the printer responds when disk usage reaches the maximum limit (100MB)

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Determines where the printer posts job accounting logs

Show 7 more labels / short text on this page
Menu item Description · Job Accounting Log · Off On · Accounting Log Frequency · Monthly Weekly · 1–99 Off · Disk Full Action
Page 135 of the Lexmark 030 user manual — Finishing menu
Page 135 · click to enlarge
Page 135

Understanding printer menus 135

E‑mail Address to Send Logs Specifies the e‑mail address to which the device sends job accounting logs

Log File Prefix Note: The current host name defined in the TCP/IP menu is used as the default log file prefix.

Finishing menu

Specifies whether duplex (2‑sided) printing is set as the default for all print jobs

1 sided 2 sided

  • 1 sided is the factory default setting.
  • You can set 2-sided printing from the software program. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the print dialog and pop-up menus.

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specifies a default number of copies for each print job

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

On (1,2,1,2,1,2) Off (1,1,1,2,2,2)

  • On is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.
  • Both settings print the entire job the number of times specified by the Copies menu setting.
Show 7 more labels / short text on this page
Menu item Description · Menu item Description · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate
Page 136 of the Lexmark 030 user manual — Finishing menu
Page 136 · click to enlarge
Page 136

Understanding printer menus 136

Specifies whether blank separator sheets are inserted

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray [x] Manual Feeder

Specifies that multiple‑page images be printed on one side of a sheet of paper

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print on each page.

Specifies the positioning of multiple‑page images

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of images and whether the images are in portrait or landscape orientation.

Specifies the orientation of a multiple‑page sheet

Prints a border on each page image

Show 9 more labels / short text on this page
Menu item Description · Separator Sheets · Separator Source · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid
Page 137 of the Lexmark 030 user manual — Quality menu
Page 137 · click to enlarge
Page 137

Understanding printer menus 137

Quality menu

Specifies whether images are printed in monochrome grayscale or in color

Adjusts the color output on the printed page

  • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page.
  • Off turns off color correction.
  • Manual allows customization of the color tables using the settings available from the Manual Color menu.
  • Due to the differences in additive and subtractive colors, certain colors that appear on computer monitors are impossible to duplicate on the printed page.

1200 Image Q Specifies the printed output resolution

1–5 Lightens or darkens the printed output

  • 4 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
  • If Print Mode is set to Black Only, a setting of 5 increases toner density and darkness to all print jobs.
  • If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.

Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts

  • Off is the factory default setting.
  • You can set this option from the software program. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the print dialog and pop ‑ up menus.
  • To set Enhance Fine Lines using the Embedded Web Server, type the network printer IP address in the address field of your Web browser.

Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

  • Off is the factory default setting.
  • On overrides Toner Darkness settings.
Show 11 more labels / short text on this page
Menu item Description · Print Mode · Color Black Only · Color Correction · Auto Off Manual · Print Resolution · Toner Darkness · Enhance Fine Lines · Off On · Color Saver · Off On
Page 138 of the Lexmark 030 user manual — Quality menu
Page 138 · click to enlarge
Page 138

Understanding printer menus 138

Adjusts brightness in color outputs

‑6 to 6

  • 0 is the factory default setting.
  • ‑ 6 is the maximum decrease. 6 is the maximum increase.
  • This does not affect files where CMYK color specifications are being used.

0–5 Adjusts contrast in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are being used.

0–5 Adjusts saturation in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are being used.

Adjusts color in printed output by increasing or decreasing the amount of toner being used for each color

‑5 to 5 Magenta

‑5 to 5 Yellow

‑5 to 5 Black

‑5 to 5

Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer

sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

  • Selecting any setting prints the sample.
  • Color samples consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed. These pages can be used to help decide which combinations to use to get the desired printed output.
  • From a browser window, type the IP address of the printer to access a complete list of color sample pages from the Embedded Web Server.
Show 8 more labels / short text on this page
Menu item Description · RGB Brightness · RGB Contrast · RGB Saturation · Color Balance · Cyan · Reset Defaults · Color Samples
Page 139 of the Lexmark 030 user manual — Quality menu
Page 139 · click to enlarge
Page 139

Understanding printer menus 139

Customizes the RGB color conversions

Vivid sRGB Display Display True Black sRGB Vivid Off RGB Text

  • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor.
  • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivid applies a color table that increases saturation. This is preferred for business graphics and text.
  • Vivid applies a color conversion table that produces brighter, more saturated colors.
  • Display—True Black applies a color conversion table that uses only black toner for neutral gray colors.
  • Off turns off color conversion.

Vivid sRGB Display Display True Black sRGB Vivid Off RGB Graphics

Vivid sRGB Display Display True Black sRGB Vivid Off

Customizes the CMYK color conversions

US CMYK Euro CMYK Vivid CMYK Off CMYK Text

  • US CMYK is the US factory default setting. US CMYK applies a color conversion table that tries to produce output that matches SWOP color output.
  • Euro CMYK is the international factory default setting. Euro CMYK applies a color conversion table that tries to produce output that matches EuroScale color output.
  • Vivid CMYK increases color saturation for the US CMYK color conversion table.
  • Off turns off color conversion.

US CMYK Euro CMYK Vivid CMYK Off CMYK Graphics

US CMYK Euro CMYK Vivid CMYK Off

Spot Color Replacement Provides the capability to assign specific CMYK values to named spot colors

Color Adjust Initiates a recalibration of color conversion tables and allows the printer to make adjustments for color variations in output

  • Adjusting color starts when the menu is selected. Adjusting appears on the display until the process is finished.
  • Color variations in output sometimes result from changeable conditions such as room temperature and humidity. Color adjustments are made on printer algorithms. Color alignment is also recalibrated in this process.
Show 5 more labels / short text on this page
Menu item Description · Manual Color · RGB Image · Manual Color · CMYK Image
Page 140 of the Lexmark 030 user manual — Utilities menu
Page 140 · click to enlarge
Page 140

Understanding printer menus 140

Utilities menu

Removes confidential and held jobs from the printer hard disk

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
  • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory.

Formats the flash memory

  • Yes deletes all data stored in flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory option card in the printer.
  • A flash memory option card must be installed in the printer and operating properly for this menu item to be available.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.

Delete Downloads on Disk

Removes downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs

Delete Now Do Not Delete

  • Delete Now configures the printer control panel to return to the originating screen after the deletion process is completed.
  • Do Not Delete sets the printer control panel to return to the main Utilities menu.

Activate Hex Trace Assists in isolating the source of a print job problem

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn the printer off or reset the printer.

Provides an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

Show 6 more labels / short text on this page
Menu item Description · Remove Held Jobs · Format Flash · Yes No · Coverage Estimator · Off On
Page 141 of the Lexmark 030 user manual — PostScript menu
Page 141 · click to enlarge
Page 141

Understanding printer menus 141

XPS menu

Prints a page containing information on errors, including XML markup errors

PDF menu

Scales page content to fit the selected paper size

Prints annotations in a PDF

Do Not Print Print

PostScript menu

Prints a page containing the PostScript error

Lock PS Startup Mode

Enables users to disable the SysStart file

Establishes the font search order

  • Resident is the factory default setting.
  • This menu item is available only if a formatted flash memory option card or printer hard disk is installed and operating properly.
  • Make sure the flash memory option or printer hard disk is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.

Enhances the contrast and sharpness of low‑resolution images and smooths their color transitions

  • Off is the factory default setting.
  • Image Smoothing has no effect on images that are 300 dpi or higher in resolution.
Show 15 more labels / short text on this page
Menu item Description · Print Error Pages · Off On · Menu item Description · Scale to Fit · No Yes · Annotations · Menu item Description · Print PS Error · Off On · Off On · Font Priority · Resident Flash/Disk · Image Smoothing · Off On
Page 142 of the Lexmark 030 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 142 · click to enlarge
Page 142

Understanding printer menus 142

PCL Emul menu

Specifies the set of fonts used by the Font Name menu item

Resident Disk Download Flash All

  • Resident is the factory default setting. Resident shows the factory default set of fonts downloaded in RAM.
  • Flash and Disk settings show all fonts resident in that option.
  • The Flash option must be properly formatted and cannot be read/write ‑ , write ‑ , or password ‑ protected.
  • Download shows all the fonts downloaded in RAM.
  • All shows all fonts available to any option.

Identifies a specific font and the option where it is stored

Specifies the symbol set for each font name

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.
Show 9 more labels / short text on this page
Menu item Description · Font Source · Font Name · Courier 10 · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch
Page 143 of the Lexmark 030 user manual — PCL Emul menu
Page 143 · click to enlarge
Page 143

Understanding printer menus 143

Specifies the orientation of text and graphics on the page

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Sets the printer to print on A4‑size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow the printing of eighty 10 ‑ pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Off None 0–199 Assign Tray [x]

  • Off is the factory default setting.
  • None is not an available selection. It is only displayed when it is selected by the PCL 5 interpreter. It also ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Show 16 more labels / short text on this page
Menu item Description · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · 1–255 60 64 · PCL Emulation Settings · A4 Width · PCL Emulation Settings · Off On · PCL Emulation Settings · Off On · Tray Renumber · Assign MP Feeder · Off None 0–199
Page 144 of the Lexmark 030 user manual — HTML menu
Page 144 · click to enlarge
Page 144

Understanding printer menus 144

Displays the factory default setting assigned to each tray, drawer, or feeder

Returns all tray, drawer, and feeder assignments to the factory default settings

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKO

Sets the default font for HTML documents

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

1–255 pt Sets the default font size for HTML documents

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.
Show 11 more labels / short text on this page
Menu item Description · Tray Renumber · View Factory Defaults · None · Tray Renumber · Restore Defaults · Yes No · Menu Item Description · Font Name · Menu item Description · Font Size
Page 145 of the Lexmark 030 user manual — Image menu
Page 145 · click to enlarge
Page 145

Understanding printer menus 145

1–400% Scales the default font for HTML documents

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Sets the page orientation for HTML documents

8–255 mm Sets the page margin for HTML documents

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.

Specifies whether to print backgrounds on HTML documents

Print Do Not Print

Image menu

Selects the optimal paper size, scaling, and orientation

Inverts bi‑tonal monochrome images

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Best Fit Anchor Center Fit Height/Width Fit Height Fit Width Anchor Top Left

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

Show 13 more labels / short text on this page
Menu item Description · Scale · Orientation · Portrait Landscape · Margin Size · Backgrounds · Menu item Description · Auto Fit · On Off · Invert · Off On · Scaling · Orientation
Page 146 of the Lexmark 030 user manual — Help menu
Page 146 · click to enlarge
Page 146

Understanding printer menus 146

Help menu

The Help menu consists of a series of Help pages that are stored in the printer as PDF files. They contain information about using the printer and performing printing tasks.

English, French, German, and Spanish translations are stored in the printer. Other translations are available on the Lexmark Web site at www.lexmark.com.

Print All Guides Prints all the guides

Color Quality Provides information about adjusting and customizing color printing

Print Quality Provides information about solving print quality issues

Printing Guide Provides information about loading paper and other speciality media

Media Guide Provides a list of the paper sizes supported in trays, drawers, and feeders

Print Defects Guide Provides help in determining the printer part causing a repetitive defect

Menu Map Provides a list of the printer control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Moving Guide Provides instructions for safely moving the printer

Supplies Guide Provides part numbers for ordering supplies

Menu item Description

Page 147 of the Lexmark 030 user manual — Erasing volatile memory
Page 147 · click to enlarge
Page 147

Securing the memory before moving the printer 147

Securing the memory before moving the printer

Statement of Volatility

Your printer contains various types of memory that are capable of storing device and network settings, information from embedded solutions, and user data. The types of memory—along with the types of data stored by each—are described below.

  • Volatile memory —Your device utilizes standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs.
  • Non ‑ volatile memory —Your device may utilize two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, scanner and bookmark settings, and embedded solutions.
  • Hard disk memory —Some devices have a hard disk drive installed. The printer hard disk is designed for device ‑ specific functionality and cannot be used for long term storage for data that is not print ‑ related. The hard disk does not provide the capability for users to extract information, create folders, create disk or network file shares, or FTP information directly from a client device. The hard disk can retain buffered user data from complex scan, print, copy, and fax jobs, as well as form data, and font data.

There are several circumstances under which you might wish to erase the contents of the memory devices installed in your printer. A partial list includes:

  • The printer is being decommissioned
  • The printer hard drive is being replaced
  • The printer is being moved to a different department or location
  • The printer is being serviced by someone from outside your organization
  • The printer is being removed from your premises for service
  • The printer is being sold to another organization

Disposing of a hard drive

In high‑security environments, it may be necessary to take additional steps to ensure that confidential data stored on the printer hard disk cannot be accessed once the printer—or its hard disk—is removed from your premises. While most data can be erased electronically, you may want to consider one or more of the following actions before disposing of a printer or hard disk:

  • Degaussing —Flushes the hard drive with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed on your printer requires a power source to retain information. To erase the buffered data, simply power down the device.

Page 148 of the Lexmark 030 user manual — Using the printer control panel
Page 148 · click to enlarge
Page 148

Securing the memory before moving the printer 148

Erasing non ‑ volatile memory

  • Individual settings, device and network settings, security settings, and embedded solutions —Erase information and settings by selecting Wipe All Settings in the Configuration menu.
  • Fax data —Erase fax settings and data by selecting Wipe All Settings in the Configuration menu.

1 Turn off the printer.

2 Hold down and 6 MNO while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully powered up, the touch screen displays a list of functions, instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer will reboot several times during this process.

4 Touch Back > Exit Config Menu.

The printer will power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

Configuring Disk Wiping in the printer menus enables you to remove residual confidential material left by scan, print, copy, and fax jobs, by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down and 6 MNO while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully powered up, the touch screen displays a list of functions, instead of the standard home screen icons.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping. A status bar will indicate the progress of the disk wiping task.

5 Touch Back > Exit Config Menu.

The printer will power‑on reset, and then return to normal operating mode.

Page 149 of the Lexmark 030 user manual — Using the printer control panel
Page 149 · click to enlarge
Page 149

Securing the memory before moving the printer 149

Configuring printer hard disk encryption

Enabling hard disk encryption helps prevent the loss of sensitive data in the event your printer or its hard disk is stolen.

Using the Embedded Web Server

1 From the Embedded Web Server, click Settings > Security > Disk Encryption.

2 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the content of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

3 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down and 6 MNO while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. Once the printer is fully powered up, the touch screen displays a list of functions, instead of standard home screen icons such as Copy or Fax.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back, and then Exit Config Menu.

The printer will power‑on reset, and then return to normal operating mode.

Page 150 of the Lexmark 030 user manual — Cleaning the printhead lenses
Page 150 · click to enlarge
Page 150

Maintaining the printer 150

Maintaining the printer

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit bin.

3 Dampen a clean, lint‑free cloth with water.

4 Wipe only the outside of the printer, making sure to include the standard exit bin.

5 Make sure the paper support and standard exit bin are dry before beginning a new print job.

Cleaning the printhead lenses

1 Open the front door.

2 Turn the toner lock lever to the right and pull the toner cartridge out.

Lexmark 030 — Cleaning the printhead lenses diagram (page 150)
Fig. 95 · Cleaning the printhead lenses
Page 151 of the Lexmark 030 user manual — Maintaining the printer
Page 151 · click to enlarge
Page 151

Maintaining the printer 151

3 Remove the imaging unit: a Open the internal cover.

Lexmark 030 — Maintaining the printer diagram (page 151)
Fig. 96 · Maintaining the printer

b Push the imaging unit lock lever up and pull out the imaging unit.

Lexmark 030 — Maintaining the printer diagram (page 151)
Fig. 97 · Maintaining the printer

4 Locate the LED wipe at the end of the imaging unit. Make sure it is in the correct position.

Lexmark 030 — Maintaining the printer diagram (page 151)
Fig. 98 · Maintaining the printer
Page 152 of the Lexmark 030 user manual — Maintaining the printer
Page 152 · click to enlarge
Page 152

Maintaining the printer 152

5 Reinstall the imaging unit. When inserted into the printer, the LED wipe will rub across the row of LEDs, thus cleaning the printhead lenses.

Lexmark 030 — Maintaining the printer diagram (page 152)
Fig. 99 · Maintaining the printer

a Insert the imaging unit into the printer until it clicks into place.

b Using both hands, push the sides of the internal cover firmly until the cover clicks into place.

Lexmark 030 — Maintaining the printer diagram (page 152)
Fig. 100 · Maintaining the printer
Page 153 of the Lexmark 030 user manual — Checking the status of supplies from the printer control panel
Page 153 · click to enlarge
Page 153

Maintaining the printer 153

6 Insert the toner cartridge into the printer and then turn the toner lock lever to the left.

Lexmark 030 — Storing supplies diagram (page 153)
Fig. 101 · Storing supplies

7 Repeat step 2–6 to for all imaging units.

8 Close the front door.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

Checking the status of supplies from the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Page 154 of the Lexmark 030 user manual — Ordering imaging units
Page 154 · click to enlarge
Page 154

Maintaining the printer 154

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Device Status.

The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place where you purchased the printer.

Ordering toner cartridges

When 88.xx [color] cartridge low, or 88.xx [color] cartridge nearly low appears, order a new cartridge.

When 88.2x Replace [color] cartridge appears, replace the specified cartridge.

Estimated cartridge yield is based on the ISO/IEC 19798 standard (with about 5% coverage per color). Extremely low print coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may cause cartridge parts to fail prior to exhaustion of toner.

Recommended toner cartridges and part numbers

Part name Part number

Black high‑yield toner cartridge C925H2KG

Yellow high‑yield toner cartridge C925H2YG

Magenta high‑yield toner cartridge C925H2MG

Cyan high‑yield toner cartridge C925H2CG

Ordering imaging units

When 84.xx [Color] imaging unit low, or 84.xx [Color] imaging unit nearly low appears, order a replacement imaging unit.

When 84.xx Replace [color] imaging unit and [color] cartridge appears, replace the specified imaging unit and toner cartridge.

Page 155 of the Lexmark 030 user manual — Ordering a waste toner bottle
Page 155 · click to enlarge
Page 155

Maintaining the printer 155

Recommended imaging units and part numbers

Part name Part number

Black imaging unit C925X72G

Yellow imaging unit C925X75G

Magenta imaging unit C925X74G

Cyan imaging unit C925X73G

Ordering a fuser or a transfer module

When 80.xx Fuser life warning, 80.xx Fuser near life warning, or 83.xx Transfer module life warning appears, order a replacement fuser or a transfer module.

When 80.xx Replace fuser or 83.xx Replace transfer module appears, install the new fuser or the new transfer module. For installation information, see the documentation that came with the part.

Part name Part number

Fuser 40X6013 (110 volts)

Ordering a waste toner bottle

When 82.xx Waste toner bottle nearly full appears, order a replacement waste toner bottle.

When 82.xx Replace waste toner bottle appears, replace the waste toner bottle.

Part name Part number

Waste toner bottle C925X76G

40X6093 (220 volts) · Transfer module 40X6011

Page 156 of the Lexmark 030 user manual — Replacing an imaging unit
Page 156 · click to enlarge
Page 156

Maintaining the printer 156

Replacing Supplies

Replacing an imaging unit

1 Open the front door.

2 Open the internal cover.

Lexmark 030 — Replacing an imaging unit diagram (page 156)
Fig. 102 · Replacing an imaging unit

3 Push the imaging unit lock lever up and pull out the imaging unit with the toner cartridge attached to it.

Lexmark 030 — Replacing an imaging unit diagram (page 156)
Fig. 103 · Replacing an imaging unit

4 Unpack the replacement imaging unit.

Page 157 of the Lexmark 030 user manual — Replacing Supplies
Page 157 · click to enlarge
Page 157

Maintaining the printer 157

5 Peel off the black protective sheet and the toner sealing tape.

Lexmark 030 — Replacing Supplies diagram (page 157)
Fig. 104 · Replacing Supplies

6 Insert the imaging unit into the printer until it clicks it into place.

7 Using both hands, push the sides of the internal cover firmly until the cover clicks into place.

Lexmark 030 — Replacing Supplies diagram (page 157)
Fig. 105 · Replacing Supplies

8 Unpack the toner cartridge, and then shake it to redistribute the toner.

Page 158 of the Lexmark 030 user manual — Replacing a toner cartridge
Page 158 · click to enlarge
Page 158

Maintaining the printer 158

9 Peel off the toner sealing tape.

Lexmark 030 — Replacing a toner cartridge diagram (page 158)
Fig. 106 · Replacing a toner cartridge

10 Insert the toner cartridge and turn the lock lever to the left.

Lexmark 030 — Replacing a toner cartridge diagram (page 158)
Fig. 107 · Replacing a toner cartridge

11 Close the front door.

Replacing a toner cartridge

1 Open the front door.

Page 159 of the Lexmark 030 user manual — Replacing a toner cartridge
Page 159 · click to enlarge
Page 159

Maintaining the printer 159

2 Turn the toner lock lever to the right and pull the toner cartridge out.

Lexmark 030 — Replacing a toner cartridge diagram (page 159)
Fig. 108 · Replacing a toner cartridge

3 Unpack the toner cartridge, and then shake it to redistribute the toner.

4 Peel off the toner sealing tape.

Lexmark 030 — Replacing a toner cartridge diagram (page 159)
Fig. 109 · Replacing a toner cartridge

5 Insert the new cartridge into the printer and then turn the toner lock lever to the left.

Lexmark 030 — Replacing a toner cartridge diagram (page 159)
Fig. 110 · Replacing a toner cartridge
Page 160 of the Lexmark 030 user manual — Replacing the waste toner bottle
Page 160 · click to enlarge
Page 160

Maintaining the printer 160

6 Close the front door.

Replacing the waste toner bottle

1 Turn the printer off.

2 Open the front door.

3 Open the internal cover.

Lexmark 030 — Replacing the waste toner bottle diagram (page 160)
Fig. 111 · Replacing the waste toner bottle

4 Pull out the used waste toner bottle.

Lexmark 030 — Replacing the waste toner bottle diagram (page 160)
Fig. 112 · Replacing the waste toner bottle
Page 161 of the Lexmark 030 user manual — Replacing the waste toner bottle
Page 161 · click to enlarge
Page 161

Maintaining the printer 161

5 Unpack the new waste toner bottle.

6 Insert the new waste toner bottle into the printer.

Lexmark 030 — Replacing the waste toner bottle diagram (page 161)
Fig. 113 · Replacing the waste toner bottle

7 Using both hands, push the sides of the internal cover firmly until it clicks into place.

Lexmark 030 — Replacing the waste toner bottle diagram (page 161)
Fig. 114 · Replacing the waste toner bottle

8 Close the front door.

9 From the printer control panel, reset the Waste Toner Bottle counter in the Supplies menu.

Page 162 of the Lexmark 030 user manual — Shipping the printer
Page 162 · click to enlarge
Page 162

Maintaining the printer 162

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off the optional tray, and then set it aside instead of trying to lift the tray and printer at the same time.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 163 of the Lexmark 030 user manual — Checking the virtual display
Page 163 · click to enlarge
Page 163

Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Using the Embedded Web Server

If the printer is installed on a network, then the Embedded Web Server is available for a range of functions including:

  • Viewing a virtual display of the printer control panel
  • Checking the status of the printer supplies
  • Configuring printer settings
  • Configuring network settings
  • Viewing reports

To access the Embedded Web Server for your printer:

1 Type the printer IP address into the address field of your Web browser.

  • If you do not know the IP address of the printer, then print a network setup page, and then locate the IP address in the TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Embedded Web Server correctly.

2 Press Enter.

Checking the virtual display

The virtual display works as an actual display would work on a printer control panel, showing printer messages.

To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

The virtual display appears in the top left corner of the screen.

Administrative support 163

Page 164 of the Lexmark 030 user manual — Restoring factory default settings
Page 164 · click to enlarge
Page 164

Checking the printer status

You can view paper tray settings, the level of toner in the toner cartridges, the percentage of life remaining in the maintenance kit, and capacity measurements of certain printer parts from the Device Status page of the Embedded Web Server.

1 Type the printer IP address in the address field of your Web browser.

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Device Status.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.

To view reports from a network printer:

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Reports, and then click the type of report you want to view.

Restoring factory default settings

If you want to retain a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now >

Administrative support 164

Page 165 of the Lexmark 030 user manual — Understanding jam numbers and locations
Page 165 · click to enlarge
Page 165

Clearing jams

By carefully selecting paper and specialty media and loading it properly, you can avoid most jams. If jams do occur, follow the steps outlined in this chapter.

If Jam Recovery is set to On, then the printer prints a new copy of the page that jammed. If Jam Recovery is set to Auto, then the printer reprints the jammed page if enough printer memory is available.

Avoiding jams

Paper tray recommendations

  • Make sure the paper lies flat in the tray.
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing too tightly against the paper or envelopes.
  • Push the tray in firmly after loading paper.

Paper recommendations

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex and straighten paper before loading it.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Make sure all sizes and types are set correctly in the printer control panel menus.
  • Store paper per manufacturer recommendations.

Understanding jam numbers and locations

When a jam occurs, a message indicating the jam location appears on the display. Open doors and covers and remove trays to access jam locations. To resolve any paper jam message, you must clear all jammed paper from the paper path.

Clearing jams 165

Page 166 of the Lexmark 030 user manual — Clearing jams
Page 166 · click to enlarge
Page 166
Lexmark 030 — Clearing jams diagram (page 166)
Fig. 115 · Clearing jams

1 200 Open the side cover, and then remove any jams.

201 Open the side cover, and then remove any jams.

203 Open the side cover, and then remove any jams.

2 230 1 Open the side cover. 2 Lower the duplex unit, and then remove any jams.

231‑239 1 Open the side cover. 2 Lower the duplex unit, and then remove any jams.

3 24x 1 Open the side cover, and then remove any jams. 2 Open each tray, and then remove any jams.

4 250 1 Remove all media from the multipurpose feeder. 2 Flex and stack the media. 3 Reload paper or media in the multipurpose feeder. 4 Adjust the paper guides. 5 Touch Continue, jam cleared.

Clearing jams 166

Page 167 of the Lexmark 030 user manual — 200 paper jam
Page 167 · click to enlarge
Page 167

200 paper jam

1 Open the side door.

2 Pull the jammed paper up and out to remove it from the paper path.

Lexmark 030 — 200 paper jam diagram (page 167)
Fig. 116 · 200 paper jam
  • Make sure all paper fragments are removed.
  • If the page is in the fuser, the fuser nip release lever should be lowered and should be switched to envelope mode.
  • After removing the jammed page, return the lever to the proper position.

3 Close the side door.

4 Touch Continue, jam cleared.

Clearing jams 167

Page 168 of the Lexmark 030 user manual — 201 paper jam
Page 168 · click to enlarge
Page 168

201 paper jam

1 Open the side door.

2 Determine where the jam is located, and then remove it: a If the paper is visible under the fuser, then grasp it on each side and pull it out.

Lexmark 030 — 201 paper jam diagram (page 168)
Fig. 117 · 201 paper jam

b If the paper is not visible, then you will need to remove the fuser unit.

Lexmark 030 — 201 paper jam diagram (page 168)
Fig. 118 · 201 paper jam

2 Remove the jammed paper.

Clearing jams 168

Page 169 of the Lexmark 030 user manual — 203 paper jam
Page 169 · click to enlarge
Page 169
  • Make sure all paper fragments are removed.
  • Pull the jammed paper downwards.
  • If the paper is in the fuser, then the fuser nip release lever should be lowered and should be switched to envelope mode.
  • After removing the jammed paper, return the lever to the proper position. 3 Align the fuser unit using the handles on each side, and then place it back into the printer.
Lexmark 030 — 203 paper jam diagram (page 169)
Fig. 119 · 203 paper jam

3 Close the side door.

4 Touch Continue, jam cleared.

203 paper jam

1 Grasp any jammed paper visible in the standard exit bin, and then gently pull it out.

Lexmark 030 — 203 paper jam diagram (page 169)
Fig. 120 · 203 paper jam
  • Make sure all paper fragments are removed.
  • If the page is in the fuser, then the fuser nip release lever should be lowered and should be switched to envelope mode.
  • After removing the jammed page, return the lever to the proper position.

2 Touch Continue, jam cleared.

Clearing jams 169

Page 170 of the Lexmark 030 user manual — 231–239 paper jams
Page 170 · click to enlarge
Page 170

230 paper jam

1 Open the side door.

2 Hold onto the handles of the duplexing unit, open the cover, and then remove any jammed paper.

Lexmark 030 — 230 paper jam diagram (page 170)
Fig. 121 · 230 paper jam

3 Close the cover on the duplexing unit.

Lexmark 030 — 230 paper jam diagram (page 170)
Fig. 122 · 230 paper jam

4 Close the side door.

5 Touch Continue, jam cleared.

231–239 paper jams

1 Open the side door.

2 Hold onto the handles of the duplexing unit, open the cover, and then remove any jammed paper.

Clearing jams 170

Page 171 of the Lexmark 030 user manual — Paper jam in Tray 1
Page 171 · click to enlarge
Page 171
Lexmark 030 — 24x paper jam diagram (page 171)
Fig. 123 · 24x paper jam

3 Close the cover of the duplexing unit.

Lexmark 030 — 24x paper jam diagram (page 171)
Fig. 124 · 24x paper jam

4 Close the side door.

5 Touch Continue, jam cleared.

24x paper jam

Paper jam in Tray 1

1 Check the side access door to trays and then pull the jammed pages out.

Lexmark 030 — Paper jam in Tray 1 diagram (page 171)
Fig. 125 · Paper jam in Tray 1

Clearing jams 171

Page 172 of the Lexmark 030 user manual — Paper jam in one of the optional trays
Page 172 · click to enlarge
Page 172

2 Open Tray 1, and then pull the jammed pages straight up and out.

Lexmark 030 — 24x paper jam diagram (page 172)
Fig. 126 · 24x paper jam

3 Close Tray 1.

4 Touch Continue, jam cleared.

Paper jam in one of the optional trays

1 Check the side access door to trays and then pull the jammed pages out.

Lexmark 030 — Paper jam in one of the optional trays diagram (page 172)
Fig. 127 · Paper jam in one of the optional trays

Clearing jams 172

Page 173 of the Lexmark 030 user manual — 250 paper jam
Page 173 · click to enlarge
Page 173

2 Open the specified tray, and then pull the jammed pages out.

Lexmark 030 — 250 paper jam diagram (page 173)
Fig. 128 · 250 paper jam

3 Close the tray.

4 Touch Continue, jam cleared.

250 paper jam

1 Remove any jammed pages from the multipurpose feeder.

Lexmark 030 — 250 paper jam diagram (page 173)
Fig. 129 · 250 paper jam

2 Load paper into the multipurpose feeder.

3 Touch Continue, jam cleared.

Clearing jams 173

Page 174 of the Lexmark 030 user manual — Change [paper source] to [custom type name] load [orientation]
Page 174 · click to enlarge
Page 174

Troubleshooting

Checking an unresponsive printer

If your printer is not responding, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electrical equipment plugged into the outlet is working.
  • The printer is turned on.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem.

Understanding printer messages

Adjusting color

Wait for the process to complete.

An error has occurred with the USB drive. Please remove and reinsert drive.

Try one or more of the following:

  • Remove and reinsert the flash drive.
  • If the error message remains, the flash memory may be defective and require replacement.

Change [paper source] to [custom type name]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .

Troubleshooting 174

Page 175 of the Lexmark 030 user manual — Close front or side door
Page 175 · click to enlarge
Page 175
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom string]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [paper size] [paper type]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [paper size] [paper type] load [orientation]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Close [tray] door

Close the specified tray door.

Close front or side door

Close the front or side door of the printer.

Troubleshooting 175

Page 176 of the Lexmark 030 user manual — Install Tray [x]
Page 176 · click to enlarge
Page 176

Disk corrupted

The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard disk must be reformatted.

Touch Format disk to reformat the printer hard disk and clear the message.

Disk near full. Securely clearing disk space.

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Delete fonts, macros, and other data stored on the printer hard disk.
  • Install a hard disk with higher capacity.

Disk problem

The printer hard disk must be reformatted.

Touch Format disk to reformat the printer hard disk and clear the message.

Error reading USB drive. Remove USB.

An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.

Insert Tray [x]

Insert the specified tray into the printer.

Install Tray [x]

Try one or more of the following:

  • Install the specified tray: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.

Troubleshooting 176

Page 177 of the Lexmark 030 user manual — Load Manual Feeder with [custom type name]
Page 177 · click to enlarge
Page 177

Load [src] with [custom type name]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it prints from the default paper source. • Cancel the print job.

Load [src] with [custom string]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it prints from the default paper source. • Cancel the print job.

Load [src] with [size]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it feeds from the default paper source. • Cancel the print job.

Load [src] with [type] [size]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it feeds from the default paper source. • Cancel the print job.

Load Manual Feeder with [custom type name]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Troubleshooting 177

Page 178 of the Lexmark 030 user manual — Restore held jobs?
Page 178 · click to enlarge
Page 178

Load Manual Feeder with [custom string]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [paper size]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [paper type] [paper size]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Paper changes needed

Try one or more of the following:

  • Touch Use current supplies to clear the message and continue printing.
  • Cancel the current print job.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Restore held jobs?

Try one or more of the following:

  • Touch Restore to restore all held jobs stored on the printer hard disk.
  • Touch Do not restore if you do not want any print jobs to be restored.

Troubleshooting 178

Page 179 of the Lexmark 030 user manual — 34 Incorrect paper size, open [src]
Page 179 · click to enlarge
Page 179

Some held jobs were not restored

Touch Continue to delete the specified job.

Supply needed to complete job

A supply needed to complete the job is missing. Touch Cancel to clear the message.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.

30.xx Missing [color] cartridge and/or [color] imaging unit

Try one or more of the following:

  • Remove and reinstall the specified toner cartridge or imaging unit. For instructions on removing a toner cartridge or imaging unit, touch More information .
  • Install a new toner cartridge or imaging unit, following the instruction sheet that came with the replacement part.

31.xx Missing or defective [color] cartridge

Try one or more of the following:

1 Remove and reinstall the specified print cartridge.

For instructions on removing a print cartridge, touch More Information.

2 Touch Continue to clear the message.

32.xx [color] cartridge part number unsupported by device

Remove the unsupported toner cartridge, and then install a supported one.

34 Incorrect paper size, open [src]

Try one or more of the following:

  • Load the appropriate paper or specialty media in the proper tray.
  • Confirm that the wheel on tray 1 is set to the paper size loaded in the tray. Make sure this size is the size you are trying to print.
  • Touch Continue to clear the message and print using a different tray.
  • Check length and width guides of the tray and make sure the paper is properly loaded in the tray.

Troubleshooting 179

Page 180 of the Lexmark 030 user manual — 37 Insufficient memory, some Held Jobs were deleted
Page 180 · click to enlarge
Page 180
  • Make sure the Print Properties or Print dialog settings have the correct paper size and type.
  • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.
  • Cancel the print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:

  • Touch Continue to disable Resource Save and continue printing.
  • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
  • Install additional memory.

36 Printer service required

Touch Continue to clear the message or contact customer support.

37 Insufficient memory to collate job

Try one or more of the following:

  • Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:

  • Touch Continue to stop the defragment operation and continue printing.
  • Delete fonts, macros, and other data in printer memory.
  • Install additional printer memory.

37 Insufficient memory, some held jobs will not be restored

The printer deleted some held jobs in order to process current jobs.

Touch Continue to clear the message.

37 Insufficient memory, some Held Jobs were deleted

The printer deleted some held jobs in order to process current jobs.

Touch Continue to clear the message.

Troubleshooting 180

Page 181 of the Lexmark 030 user manual — 54 Serial option [x] error
Page 181 · click to enlarge
Page 181

38 Memory full

Try one or more of the following:

  • Touch Cancel job to clear the message.
  • Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Cancel the current print job.
  • Install additional printer memory.

51 Defective flash detected

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Cancel the current print job.

52 Not enough free space in flash memory for resources

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Downloaded fonts and macros not previously stored in flash memory are deleted.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:

  • Touch Continue to stop the defragment operation and continue printing.
  • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Serial option [x] error

Try one or more of the following:

  • Check that the serial cable is properly connected and is the correct one for the serial port.
  • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer.
  • Touch Continue to continue printing.
  • Turn the printer power off and then back on to reset the printer.

Troubleshooting 181

Page 182 of the Lexmark 030 user manual — 56 Standard USB port disabled
Page 182 · click to enlarge
Page 182

54 Standard network software error

Try one or more of the following:

  • Touch Continue to continue printing.
  • Turn the printer off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

54 Network [x] software error

Try one or more of the following:

  • Touch Continue to continue printing.
  • Turn the printer off, wait for about 10 seconds, and then turn the printer back on.
  • Upgrade (flash) the network firmware in the printer.

55 Unsupported option in slot [x]

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the unsupported option card from the printer system board, and then replace it with a supported card.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

56 Parallel port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

56 Serial port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the serial port. • Make sure the Serial Buffer menu is not set to Disabled.

56 Standard USB port disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

Troubleshooting 182

Page 183 of the Lexmark 030 user manual — 58 Too many flash options installed
Page 183 · click to enlarge
Page 183

56 Standard parallel port disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

56 USB port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu is not set to Disabled.

57 Configuration change, some held jobs were not restored

Something has changed in the printer to invalidate the held jobs. Possible changes include:

  • The printer firmware has been updated.
  • Paper input options needed for the print job were removed.
  • The print job was created using data from a device in the USB port and the device is no longer in the USB port.
  • The printer hard disk contains print jobs that were stored while installed in a different printer model.

Touch Continue to clear the message.

58 Too many disks installed

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess disks.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

58 Too many flash options installed

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess flash memory.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

Troubleshooting 183

Page 184 of the Lexmark 030 user manual — 80.xx Fuser life warning
Page 184 · click to enlarge
Page 184

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

58 Input config error

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Check if all tray configurations are correct. Remove unnecessary trays if needed.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

61 Remove defective disk

Try one or more of the following:

  • Remove the defective printer hard disk.
  • Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:

  • Touch Continue to clear the message and continue processing.
  • Delete fonts, macros, and other data stored on the printer hard disk.
  • Install a printer hard disk with larger capacity.

80.xx Fuser near life warning

1 Order a replacement fuser immediately.

2 When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.

3 Touch Continue to clear the message and continue printing.

80.xx Fuser life warning

  • Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.
  • Touch Continue to clear the message and continue printing.

Troubleshooting 184

Page 185 of the Lexmark 030 user manual — 84 Defective [color] imaging unit
Page 185 · click to enlarge
Page 185

80.xx Replace fuser

Replace the fuser using the instruction sheet that came with the replacement part.

80.xx Fuser missing

1 Replace the fuser, following the instruction sheet that came with the replacement part.

2 Touch Continue to clear the message and continue printing.

82.xx Replace waste toner bottle

1 Replace the waste toner bottle.

For instructions on replacing the waste toner bottle, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

82.xx Waste toner bottle nearly full

Order a replacement waste toner bottle immediately.

1 Replace the waste toner bottle.

For instructions on installing the waste toner bottle, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

83.xx Transfer module life warning

1 Replace the transfer module, following the instruction sheet that came with the replacement part.

2 Touch Continue to clear the message and continue printing.

83.xx Transfer module missing

Insert the transfer module into the printer.

83.xx Replace transfer module

Replace the transfer module, following the instruction sheet that came with the replacement part.

84 Defective [color] imaging unit

The specified imaging unit is either missing or not functioning properly. Try one or more of the following:

  • Remove the specified imaging unit, and then reinstall it.
  • Remove the specified imaging unit , and then install a new one.

Troubleshooting 185

Page 186 of the Lexmark 030 user manual — 88.xx [color] cartridge low
Page 186 · click to enlarge
Page 186

84.xx [color] imaging unit nearly low

1 Order a replacement imaging unit.

2 When print quality is reduced, install the new imaging unit, following the instruction sheet that came with the replacement part.

3 Touch Continue to clear the message and continue printing.

84.xx [color] imaging unit low

1 Order a replacement imaging unit immediately.

2 When print quality is reduced, install the new imaging unit, following the instruction sheet that came with the replacement part.

3 Touch Continue to clear the message and continue printing.

84.xx Replace [color] imaging unit and [color] cartridge

1 Replace the imaging unit and color cartridge, following the instruction sheets that came with the replacement parts.

2 Touch Continue to clear the message and continue printing.

84 Unsupported [color] imaging unit

Replace the specified imaging unit to continue printing.

88.xx [color] cartridge nearly low

1 Order a replacement toner cartridge.

2 Remove the specified cartridge.

3 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.

4 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.

88.xx [color] cartridge low

1 Order a replacement toner cartridge immediately.

2 Remove the specified cartridge.

3 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.

4 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.

Troubleshooting 186

Page 187 of the Lexmark 030 user manual — C HECK IF A SUPPLY IS MISSING OR NEEDS REPLACEMENT
Page 187 · click to enlarge
Page 187

88.2x Replace [color] cartridge

The specified toner cartridge is empty.

1 Replace the specified toner cartridge.

2 Touch Continue to clear the message and continue printing.

1565 Emulation error, load emulation option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.

To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.

Solving printing problems

Multiple ‑ language PDF files do not print

The PDF files may contain unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.

2 Click the printer icon > Advanced > Print as image > OK > OK.

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the flash drive is supported.

Print jobs do not print

Try one or more of the following:

M AKE SURE THERE IS NO PROBLEM WITH YOUR PRINTER

From the printer control panel, check the status. If necessary, follow the recovery instructions.

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready appears on the display before sending a print job.

C HECK IF A SUPPLY IS MISSING OR NEEDS REPLACEMENT

Remove and then reinstall or replace the supply.

Troubleshooting 187

Page 188 of the Lexmark 030 user manual — P ARTIAL JOB , NO JOB , OR BLANK PAGE PRINTS
Page 188 · click to enlarge
Page 188

C HECK IF THE STANDARD EXIT BIN IS FULL

Remove the paper stack from the standard exit bin.

C HECK IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED

  • Verify that you are using the correct printer software.
  • If the printer is connected to your computer through a USB port, then make sure you are running a supported operating system and using a compatible printer software.

M AKE SURE THE INTERNAL PRINT SERVER IS WORKING PROPERLY

  • Make sure the internal print server is properly installed and that the printer is connected to the network.
  • Print a network setup page and check that the status shows Connected . If the status is Not Connected , then check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

The printer software is available on the Lexmark Web site at http://support.lexmark.com.

MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLE

For more information, visit the Lexmark Web site at http://support.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:

P ARTIAL JOB , NO JOB , OR BLANK PAGE PRINTS

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then print it again.
  • For PDF documents, recreate the PDF and then print it again.

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.

  • For Windows users, open Print Properties. From the Print and Hold dialog, select the "Keep duplicate documents" check box under the User name text box before entering a PIN number.
  • For Macintosh users, save each print job, naming each job differently, and then send the individual jobs to the printer.

Troubleshooting 188

Page 189 of the Lexmark 030 user manual — Incorrect characters print
Page 189 · click to enlarge
Page 189

M AKE SURE THE PRINTER HAS SUFFICIENT MEMORY

Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Print job takes longer than expected

Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the print job.

T URN OFF THE P AGE P ROTECT SETTING

From the home screen, navigate to:

> Settings > General Settings > Print Recovery > Page Protect > Off >

C HANGE THE ENVIRONMENTAL SETTINGS

When using Eco‑Mode or Quiet Mode settings, you may notice a reduction in performance.

Job prints from the wrong tray or on the wrong paper

C HECK THE PAPER TYPE AND PAPER SIZE SETTINGS

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the paper type and paper size settings.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

Incorrect characters print

MAKE SURE THE PRINTER IS NOT IN HEX TRACE MODE

If Ready Hex appears on the display, then you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.

Troubleshooting 189

Page 190 of the Lexmark 030 user manual — Unexpected page breaks
Page 190 · click to enlarge
Page 190

Tray linking does not work

These are possible solutions. Try one or more of the following:

L OAD THE SAME SIZE AND TYPE OF PAPER

  • Load the same size and type of paper in each tray to be linked.
  • Move the paper guides to the correct positions for the paper size loaded in each tray.

USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS

  • Print a menu settings page and compare the settings for each tray.
  • If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From the Finishing menu or Print Properties, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory or an optional hard disk.

Unexpected page breaks

I NCREASE THE P RINT T IMEOUT VALUE

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Print Timeout

2 Increase the Print Timeout value, and then touch

Troubleshooting 190

Page 191 of the Lexmark 030 user manual — M AKE SURE THE OPTION IS INSTALLED
Page 191 · click to enlarge
Page 191

Solving home screen applications problems

An application error has occurred

C HECK THE SYSTEM LOG FOR RELEVANT DETAILS

1 Type the printer IP address or host name in the address field of your Web browser.

If you do not know the IP address or host name of the printer, then you can:

  • View the information on the printer control panel home screen, or in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or menu settings page and locate the information in the TCP/IP section.

2 Click Settings or Configuration.

3 Click Device Solutions > Solutions (eSF) > System tab > Log.

4 From the Filter menu, select an application status.

5 From the Application menu, select an application, and then click Submit.

C ONTACT CUSTOMER SUPPORT

If you still cannot isolate the problem, then contact customer support.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait for about 10 seconds, and then turn the printer on.

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer from the wall outlet.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it.

Troubleshooting 191

Page 192 of the Lexmark 030 user manual — C HECK THE I NTERNAL S OLUTIONS P ORT (ISP) CONNECTIONS
Page 192 · click to enlarge
Page 192

M AKE SURE THE OPTION IS AVAILABLE IN THE PRINTER DRIVER

It may be necessary to manually add the option in the printer driver to make it available for print jobs. For more information, see “Updating available options in the printer driver” on page 51.

M AKE SURE THE OPTION IS SELECTED

From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser.

Paper tray problems

Try one or more of the following:

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Open the paper tray.

2 Check for paper jams or misfeeds.

3 Make sure the paper guides are aligned against the edges of the paper.

4 Make sure the paper tray closes properly.

R ESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

M AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY

If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet.

Cannot detect flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Cannot detect printer hard disk

Make sure the printer hard disk is securely connected to the printer system board.

Internal Solutions Port does not operate correctly

Try one or more of the following:

C HECK THE I NTERNAL S OLUTIONS P ORT (ISP) CONNECTIONS

Make sure the ISP is securely connected to the printer system board.

Troubleshooting 192

Page 193 of the Lexmark 030 user manual — C HECK THE CABLE
Page 193 · click to enlarge
Page 193

C HECK THE CABLE

Make sure you are using the correct cable and that it is securely connected to the Internal Solutions (ISP) port.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For information on installing the network printing software, see the Networking Guide on the Software and Documentation CD.

Internal print server does not operate correctly

Try one or more of the following:

C HECK THE PRINT SERVER CONNECTIONS

  • Make sure the internal print server is attached securely to the printer system board.
  • Make sure you are using the correct cable and that it is securely connected.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For more information on installing the network printing software, do the following:

1 Open the Software and Documentation CD.

2 Click Additional.

3 Under Publications on this CD, select Networking Guide.

Memory card

Make sure the memory card is securely connected to the printer system board.

USB/parallel interface card does not operate correctly

C HECK THE USB/ PARALLEL INTERFACE CARD CONNECTION

Make sure the USB/parallel interface card is securely connected to the printer system board.

C HECK THE CABLE

Make sure you are using the correct cable and that it is securely connected.

Troubleshooting 193

Page 194 of the Lexmark 030 user manual — Jammed pages are not reprinted
Page 194 · click to enlarge
Page 194

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

C HECK THE PAPER PATH

The paper path is not clear. Clear jammed paper from the entire paper path, and then touch Continue.

Jammed pages are not reprinted

T URN ON J AM R ECOVERY

1 From the home screen, navigate to:

> Settings > General Settings > Print Recovery

2 Touch the arrows next to Jam Recovery until On or Auto appears.

Troubleshooting 194 · 3 Touch

Page 195 of the Lexmark 030 user manual — Fine horizontal lines appear on color pages
Page 195 · click to enlarge
Page 195

Solving print quality problems

If these suggestions do not correct the problem, then contact customer support. You may have a printer part that requires adjustment or replacement.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.

Clipped images

Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Fine horizontal lines appear on color pages

You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).

Troubleshooting 195

Page 196 of the Lexmark 030 user manual — C HECK THE PAPER SIZE SETTING
Page 196 · click to enlarge
Page 196

Gray background

ABCDE

ABCDE ABCDE

C HECK THE T ONER D ARKNESS SETTING

Select a lighter Toner Darkness setting:

  • From the printer control panel Quality menu, change the setting.
  • For Windows users, change the setting from Print Properties.
  • For Macintosh users, change the setting from the Print dialog.

T HE TONER CARTRIDGE MAY BE WORN OR DEFECTIVE

Replace the toner cartridge.

Incorrect margins

ABC DEF ABC DEF

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Troubleshooting 196

Page 197 of the Lexmark 030 user manual — L OAD PAPER FROM A FRESH PACKAGE
Page 197 · click to enlarge
Page 197

Light colored line, white line, or incorrectly colored line appears on prints

ABCDE ABCDE

ABCDE ABCDE ABCDE

Try one or more of the following:

M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE

Replace the defective toner cartridge.

M AKE SURE THE IMAGING UNIT IS NOT DEFECTIVE

Replace the defective imaging unit.

M AKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE

Replace the transfer module.

C LEAN THE PRINTHEAD LENSES

Remove and reinstall the imaging unit. The LED wipe at the end of the imaging unit will rub across the row of LEDs, thus cleaning the printhead lenses.

Paper curl

Try one or more of the following:

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

L OAD PAPER FROM A FRESH PACKAGE

Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.

Troubleshooting 197

Page 198 of the Lexmark 030 user manual — M AKE SURE THE FUSER IS NOT DEFECTIVE
Page 198 · click to enlarge
Page 198

Print irregularities

) ) ABCDE

ABCDE ABCDE

Try one or more of the following:

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE

Replace the worn or defective toner cartridge.

M AKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE

Replace the defective transfer module. For more information, see the instruction sheet that came with the replacement part.

M AKE SURE THE FUSER IS NOT DEFECTIVE

Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.

Troubleshooting 198

Page 199 of the Lexmark 030 user manual — M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE
Page 199 · click to enlarge
Page 199

Print is too dark

Try one or more of the following:

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting may be too dark, the Brightness setting may be too dark, or the Contrast setting may be too high.

  • Change these settings from the printer control panel Quality menu.
  • For Windows users, change these settings from Print Properties.
  • For Macintosh users: 1 Choose File > Print . 2 From the Orientation pictures drop ‑ down menu, choose Printer Features . 3 Choose a lower value for the Toner Darkness, Brightness, and Contrast settings.

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray or feeder:

  • From the printer control panel Paper menu, check the Paper Type setting.
  • For Windows users, check this setting from Print Properties.
  • For Macintosh users, check this setting from the Print dialog.

M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE

Replace the defective toner cartridge.

Troubleshooting 199

Page 200 of the Lexmark 030 user manual — M AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER
Page 200 · click to enlarge
Page 200

Print is too light

Try one or more of the following:

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting may be too light, the Brightness setting may be too light, or the Contrast setting may be too low.

  • Change these settings from the printer control panel Quality menu.
  • For Windows users, change these settings from Print Properties
  • For Macintosh users: 1 Choose File > Print . 2 From the Orientation pictures drop ‑ down menu, choose Printer Features . 3 Choose a higher value for the Toner Darkness, Brightness, and Contrast settings.

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture from high humidity. Store paper in its original wrapper until you use it.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray or feeder:

  • From the printer control panel Paper menu, check the Paper Type setting.
  • For Windows users, check this setting from Print Properties.
  • For Macintosh users, check this setting from the Print dialog.

M AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge.

1 Remove the toner cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the toner cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact customer support.

Troubleshooting 200

Page 201 of the Lexmark 030 user manual — Repeating defects appear on a page
Page 201 · click to enlarge
Page 201

M AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE

Replace the defective toner cartridge.

Printer is printing blank pages

Try one or more of the following:

MAKE SURE THERE IS NO PACKING MATERIAL LEFT ON THE TONER OR PRINT CARTRIDGE

Remove the cartridge and make sure the packing material is properly removed. Reinstall the cartridge.

MAKE SURE THE TONER OR PRINT CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure that toner is distributed evenly among all four cartridges:

1 Remove the cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the cartridge.

If the problem continues, then the printer may need to be serviced. For more information, contact customer support.

Repeating defects appear on a page

If marks occur repeatedly in only one color and multiple times on a page:

The transfer module is defective. Replace the transfer module if the defects occur every:

  • 38 mm (1.50 in.)
Show 6 more labels / short text on this page
Troubleshooting 201 · Cause Solution · ) ) · ) · ) · )
Page 202 of the Lexmark 030 user manual — M AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER
Page 202 · click to enlarge
Page 202

An imaging unit is defective. Replace the imaging unit if the defects occur every:

  • 41.0 mm (1.61 in.)
  • 75.0 mm (2.95 in.)

If marks occur down the page repeatedly in all colors:

The fuser is defective. Replace the fuser if the defects occur every:

  • 141 mm (5.55 in.)

Shadow images appear on prints

ABCDE ABCDE ABCDE ABCDE ABCDE

ABCDE

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

M AKE SURE THE IMAGING UNIT IS NOT DEFECTIVE

Replace the imaging unit.

M AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the toner cartridge.

1 Remove the toner cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the toner cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Troubleshooting 202 · Cause Solution

Page 203 of the Lexmark 030 user manual — TONER
Page 203 · click to enlarge
Page 203

Skewed print

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the length and width guides in the tray to the correct positions for the paper size loaded.

  • Make sure the guides are not too far from the paper stack.
  • Make sure the guides are not pressing too lightly against the paper stack.

C HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Solid color pages

Try one or more of the following:

MAKE SURE THE IMAGING UNIT IS INSTALLED CORRECTLY AND IS NOT DEFECTIVE

Remove and then reinstall the imaging unit. If the problem continues, the imaging unit may need to be replaced.

MAKE SURE THE TONER CARTRIDGES ARE INSTALLED CORRECTLY, ARE NOT DEFECTIVE AND NOT LOW ON

TONER

  • Remove and reinstall the toner cartridges.
  • Make sure toner is distributed evenly within the toner cartridge: 1 Remove the toner cartridge.
  • If the problem continues, the printer may need to be serviced. For more information, contact customer support.

Troubleshooting 203

Page 204 of the Lexmark 030 user manual — S ELECT ANOTHER TRAY OR FEEDER
Page 204 · click to enlarge
Page 204

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Try one or more of the following:

S ELECT ANOTHER TRAY OR FEEDER

  • From the printer control panel Paper Menu, select Default Source.
  • For Windows users, select the paper source from Print Properties.
  • For Macintosh users, select the paper source from the Print dialog and pop ‑ up menus.

MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY TONER CARTRIDGE

Replace the worn, defective, or empty toner cartridge.

C LEAR THE PAPER PATH AROUND THE TONER CARTRIDGE

Clear any paper you see or clean any visible toner from the paper path. If the problem persists, then contact Customer Support.

Streaked vertical lines appear on prints

ABCDE ABCDE ABCDE

Try one or more of the following:

S ELECT ANOTHER TRAY OR FEEDER

  • From the printer control panel Paper menu, select Default Source
  • For Windows users, select the paper source from Print Properties.
  • For Macintosh users, select the paper source from the Print dialog and pop ‑ up menus.

Troubleshooting 204

Page 205 of the Lexmark 030 user manual — Toner specks
Page 205 · click to enlarge
Page 205

MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY TONER CARTRIDGE

Replace the worn, defective, or empty toner cartridge.

C LEAR THE PAPER PATH AROUND THE TONER CARTRIDGE

Check the paper path around the toner cartridge.

Clear any paper you see.

M AKE SURE THERE IS NO TONER IN THE PAPER PATH

Toner fog or background shading appears on the page

Toner cartridge may be defective or installed incorrectly. Reinstall or replace the toner cartridge.

Transfer module may be worn or defective. Replace the transfer module.

Imaging unit may be worn or defective. Replace the imaging unit.

Fuser may be worn or defective. Replace the fuser.

Toner may be in the paper path. Call for service.

Printer may not have recalibrated recently. Perform color adjust from the Quality menu.

Application may specify an off‑white background. Check the application.

Toner rubs off

Specialty media is being used. Make sure the correct Paper Type is selected.

The Paper Weight setting in the Paper Menu is wrong for the type of paper being used.

Change the Paper Weight from Normal to Heavy. If necessary, change Paper Texture from Normal to Rough.

Fuser is worn or defective. Replace the fuser.

Fuser is in envelope mode. Open the side door. Make sure that the green lever on the left side of the fuser is not in envelope mode.

Toner specks

Toner cartridges may be worn or defective. Replace the defective or worn cartridges.

Toner is in the paper path. Call for service.

The imaging unit may be defective. Replace the defective imaging unit.

Show 4 more labels / short text on this page
Troubleshooting 205 · Cause Solution · Cause Solution · Cause Solution
Page 206 of the Lexmark 030 user manual — FAQ about color printing
Page 206 · click to enlarge
Page 206

Transparency print quality is poor

Try one or more of the following:

C HECK THE TRANSPARENCIES

Use only transparencies that meet the printer specifications.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting is set to Transparency:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE ABCDE ABCDE

Try one or more of the following:

M AKE SURE THERE IS NO DEFECTIVE OR WORN TONER CARTRIDGE

Replace the worn or defective toner cartridge.

M AKE SURE THE IMAGING UNIT IS NOT DEFECTIVE

Replace the defective imaging unit.

Solving color quality problems

FAQ about color printing

What is RGB color?

Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.

Troubleshooting 206

Page 207 of the Lexmark 030 user manual — Transparency print quality is poor
Page 207 · click to enlarge
Page 207

What is CMYK color?

Cyan, magenta, yellow, and black (known as CMYK color) inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser/LED printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.

How is color specified in a document to be printed?

Software applications typically specify document color using RGB or CMYK color combinations. Additionally, they commonly let you modify the color of each object in a document. For more information, see the software application Help section.

How does the printer know what color to print?

When you print a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object type information lets different color conversion tables be used for different types of objects. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

Should I use PostScript or PCL emulation printer software? What settings should I use for the best color?

The PostScript driver is strongly recommended for best color quality. The default settings in the PostScript driver provide preferred color quality for the majority of printouts.

Why doesn't the printed color match the color that I see on the computer screen?

The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color‑matching problems, see the question, “How can I match a particular color (such as a color in a corporate logo)?”

The printed page appears tinted. Can I slightly adjust the color?

Sometimes you may consider printed pages to appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjusting the Color Balance setting may create more preferable color. Color Balance lets you make subtle adjustments to the amount of toner being used in each color plane. Selecting positive (or negative) values for cyan, magenta, yellow, and black under the Color Balance menu will slightly increase (or decrease) the amount of toner used for the chosen color. For example, if you believe the overall printed page to be too red, then decreasing both magenta and yellow could potentially improve color.

My color transparencies seem dark when being projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency.

Make sure to print on the recommended type of color transparencies. For more information about the paper and media specifications, see the User's Guide on the Software and Documentation CD.

What is manual color correction?

The color conversion tables applied to each object when using the default Auto Color Correction setting generate preferred color for the majority of documents. Occasionally, you may want to apply a different color table mapping. This customization is accomplished using the Manual Color menu and the Manual Color Correction setting.

Troubleshooting 207

Page 208 of the Lexmark 030 user manual — Transparency print quality is poor
Page 208 · click to enlarge
Page 208

Manual Color Correction applies to RGB and CMYK color conversion table mappings as defined in the Manual Color menu.

You can select any of the different color conversion tables for RGB or CMYK:

Color conversion table Settings

  • RGB
  • sRGB Display
  • Display–True Black
  • sRGB Vivid
  • Vivid
  • Off
  • CMYK
  • US CMYK
  • Euro CMYK
  • Vivid CMYK
  • Off

How can I match a particular color (such as a corporate logo)?

Occasionally, you may have a need for the printed color of a particular object to closely match a specific color. For example, you may need to match the color of a corporate logo. While instances can occur in which the printer cannot exactly reproduce the desired color, you should be able to identify adequate color matches for the majority of cases.

The Color Samples menu item can provide useful information in helping solve this particular type of color‑matching problem. The nine Color Samples values correspond to color conversion tables in the printer. Selecting any of the Color Samples values generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

You can examine the color samples pages and identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software application. For instructions, see the software application Help. Manual Color Correction may be necessary to utilize the selected color conversion table for the particular object.

Selecting which Color Samples pages to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software application (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; no color conversion is implemented.

Note: The Color Samples pages are not useful if the software application does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist where the software application or the computer operating system adjusts the RGB or CMYK combinations specified in the application through color management. The resulting printed color may not be an exact match of the Color Samples pages.

The following table can help identify which Color Sample pages to use for color matching.

Troubleshooting 208

Page 209 of the Lexmark 030 user manual — C HECK THE NETWORK CONNECTION
Page 209 · click to enlarge
Page 209

Color specification and object to be printed

Color Correction setting Sample pages to use

RGB—Text Auto sRGB Vivid

Manual Manual Color RGB Text Setting

RGB—Graphic Auto sRGB Vivid

Manual Manual Color RGB Graphic Setting

RGB—Image Auto sRGB Display

Manual Manual Color RGB Image Setting

CMYK—Text Auto US CMYK or Euro CMYK

Manual Manual Color CMYK Text Setting

CMYK—Graphic Auto US CMYK

Manual Manual Color CMYK Graphic Setting

CMYK—Image Auto US CMYK

Manual Manual Color CMYK Image Setting

What are Detailed Color Samples and how do I access them?

These pages require the use of the Embedded Web Server. The Embedded Web Server is a series of resident pages stored in the network printer firmware. To access these pages, browse to the IP address of the network printer. Click Configuration Menu, and then click Detailed Color Samples.

For more information about using the Embedded Web Server, see the User's Guide on the Software and Documentation CD.

Detailed Color Samples are pages similar to the default pages of color samples accessible from the Quality menu using the printer control panel. The default color samples available using this method have an increment value of 10% for red, green, and blue. If you find a value on this page that is close, but would like to scan more colors in a nearby area, then you can use the Detailed Color Samples to select the desired color values and a more specific increment. This provides a way to print multiple pages of colored boxes that surround a specific color of interest.

There are nine conversion tables available with the following three options:

  • Print —Prints the default pages
  • Detailed —Lets you enter individual red, green, and blue values and a specific increment of color
  • Reset —Lets you clear the existing information and enter new values

The process can be duplicated for Cyan (C), Magenta (M), Yellow (Y), and Black (K) color conversion tables, too. Collectively, these values are known as CMYK color. The default increment is 10% for Black and 20% each for Cyan, Magenta, and Yellow.

Embedded Web Server does not open

Try one or more of the following:

C HECK THE NETWORK CONNECTION

Make sure the printer and computer are turned on and connected to the same network.

Troubleshooting 209

Page 210 of the Lexmark 030 user manual — Contacting customer support
Page 210 · click to enlarge
Page 210

C HECK THE ADDRESS ENTERED IN THE W EB BROWSER

  • Depending on the network settings, you may need to type “ https:// ” instead of “ http:// ” before the printer IP address to access the Embedded Web Server. For more information, contact your system support person.
  • Make sure printer IP address is correct.

T EMPORARILY DISABLE W EB PROXY SERVERS

Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server. For more information, contact your system support person.

Contacting customer support

When you call customer support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model type and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

In the U.S. or Canada, call 1‑800‑539‑6275. For other countries or regions, visit the Lexmark Web site at http://support.lexmark.com.

Troubleshooting 210

Page 211 of the Lexmark 030 user manual — GOVERNMENT END USERS
Page 211 · click to enlarge
Page 211

Notices

Product information

Product name:

Machine type:

Model(s):

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2012 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

Lexmark C925 · November 2012

Page 212 of the Lexmark 030 user manual — Trademarks
Page 212 · click to enlarge
Page 212

Trademarks

Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

PrintCryption is a trademark of Lexmark International, Inc.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

The following terms are trademarks or registered trademarks of these companies:

Lexmark 030 — Trademarks diagram (page 212)
Fig. 130 · Trademarks

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Page 213 of the Lexmark 030 user manual — Noise emission levels
Page 213 · click to enlarge
Page 213

Univers Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Modular component notice

This product may contain the following modular component(s):

LEX‑M01‑003; FCC ID: IYLM01003; IC: 2376A‑M01003

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Printing 53 dBA · Ready 37 dBA

Page 214 of the Lexmark 030 user manual — ENERGY STAR
Page 214 · click to enlarge
Page 214

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Page 215 of the Lexmark 030 user manual — Sleep Mode
Page 215 · click to enlarge
Page 215

Temperature information

Ambient temperature 15.6 to 32.2° C (60 to 90° F) and 8% to 80% RH

Shipping and storage temperature ‑40° to 43.3° C (110° F)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 600 W

Ready The product is waiting for a print job. 105 W

Sleep Mode The product is in a high‑level energy‑saving mode. 12 W

Hibernate The product is in a low‑level energy‑saving mode. 4.2 W

Off The product is plugged into a wall outlet, but the power switch is turned off. 0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 5

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Page 216 of the Lexmark 030 user manual — Regulatory notices for wireless products
Page 216 · click to enlarge
Page 216

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Radio interference notice

This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Page 217 of the Lexmark 030 user manual — Industry Canada (Canada)
Page 217 · click to enlarge
Page 217

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Page 218 of the Lexmark 030 user manual — RO SE SI SK TR UK
Page 218 · click to enlarge
Page 218

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Page 219 of the Lexmark 030 user manual — Statement of Limited Warranty
Page 219 · click to enlarge
Page 219

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Statement of Limited Warranty

Lexmark C925

Page 220 of the Lexmark 030 user manual — Limited warranty service
Page 220 · click to enlarge
Page 220

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at http://support.lexmark.com.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Page 221 of the Lexmark 030 user manual — Additional rights
Page 221 · click to enlarge
Page 221

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Page 222 of the Lexmark 030 user manual — LEXMARK SOFTWARE LICENSE AGREEMENT
Page 222 · click to enlarge
Page 222

LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT

PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.

LEXMARK SOFTWARE LICENSE AGREEMENT

This License Agreement (“Software License Agreement”) is a legal agreement between you (either an individual or a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed materials and electronic documentation, whether incorporated into, distributed with or for use with your Lexmark product.

1 STATEMENT OF SOFTWARE LIMITED WARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use during the warranty period. The warranty period is ninety (90) days and commences on the date the Software Program is delivered to the original end-user. This limited warranty applies only to Software Program media purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software Program should it be determined that the media does not conform to this limited warranty. 2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS SOFTWARE LICENSE AGREEMENT AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. TO THE EXTENT LEXMARK CANNOT BY LAW DISCLAIM ANY COMPONENT OF THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, LEXMARK LIMITS THE DURATION OF SUCH WARRANTIES TO THE 90-DAY TERM OF THE EXPRESS SOFTWARE LIMITED WARRANTY.

This Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified. If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of those provisions to one of the following: providing you a replacement copy of the Software Program or reimbursement of the price paid for the Software Program.

The Software Program may include internet links to other software applications and/or internet web pages hosted and operated by third parties unaffiliated with Lexmark. You acknowledge and agree that Lexmark is not responsible in any way for the hosting, performance, operation, maintenance, or content of, such software applications and/or internet web pages. 3 LIMITATION OF REMEDY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL LIABILITY OF LEXMARK UNDER THIS SOFTWARE LICENSE AGREEMENT IS EXPRESSLY LIMITED TO THE GREATER OF THE PRICE PAID FOR THE SOFTWARE PROGRAM AND FIVE U.S. DOLLARS (OR THE EQUIVALENT IN LOCAL CURRENCY). YOUR SOLE REMEDY AGAINST LEXMARK IN ANY DISPUTE UNDER THIS SOFTWARE LICENSE AGREEMENT SHALL BE TO SEEK TO RECOVER ONE OF THESE AMOUNTS, UPON PAYMENT OF WHICH LEXMARK SHALL BE RELEASED AND DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.

IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR DAMAGE TO, DATA

Page 223 of the Lexmark 030 user manual — LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
Page 223 · click to enlarge
Page 223

OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS SOFTWARE LICENSE AGREEMENT), REGARDLESS OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL PURPOSE. 4 U.S.A. STATE LAWS. This Software Limited Warranty gives you specific legal rights. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. 5 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of this License Agreement:

a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,

executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users to the number specified in your agreement with Lexmark. You may not separate the components of the Software Program for use on more than one computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance of any trademark, trade name, trade dress or intellectual property notice that appears on any computer display screens normally generated by, or as a result of, the Software Program. b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or

installation, provided the copy contains all of the original Software Program’s proprietary notices. You may not copy the Software Program to any public or distributed network. c Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License Agreement. d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the

Software Program that constitutes software provided under public license by third parties (“Freeware”) is licensed to you subject to the terms and conditions of the software license agreement accompanying such Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such license. 6 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software components, media, printed materials, and this License Agreement and you may not retain copies of the Software Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent, sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any attempt to do so shall be void. 7 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the original Software Program that formed the basis for your upgrade eligibility. 8 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble, reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly, or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program.

Page 224 of the Lexmark 030 user manual — MICROSOFT CORPORATION NOTICES
Page 224 · click to enlarge
Page 224

9 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree to destroy all copies of the Software Program together with all modifications, documentation, and merged portions in any form. 11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and services and personal property taxes, resulting from this Agreement or your Use of the Software Program. 12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either party more than two years after the cause of action has arisen, except as provided under applicable law. 13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the International Sale of Goods shall not apply. 14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at private expense. Rights of the United States Government to use the Software Program is as set forth in this Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency regulation or contract clause). 15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide such services. 16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. 17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with the intent to “sign” a contract with Lexmark. 18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter into this contract. 19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License Agreement that is included with the Software Program) is the entire agreement between you and Lexmark relating to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior or contemporaneous oral or written communications, proposals, and representations with respect to the Software Program or any other subject matter covered by this License Agreement (except to the extent such extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall control.

MICROSOFT CORPORATION NOTICES

1 This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.com/fwlink/?LinkId=52369

Page 225 of the Lexmark 030 user manual — Patent acknowledgment
Page 225 · click to enlarge
Page 225

2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.microsoft.com/fwlink/?LinkId=83288.

ADOBE SYSTEMS INCORPORATED NOTICE

Contains Flash®, Flash® Lite™ and/or Reader® technology by Adobe Systems Incorporated

This Product contains Adobe® Flash® player software under license from Adobe Systems Incorporated, Copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved. Adobe, Reader and Flash are trademarks of Adobe Systems Incorporated.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 030

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 030

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 030 manual PDF

225 pages·4.9 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…