Instruction/ maintenance manual of the product UXABP48 APC
Go to page of 4
UXBP Battery Pack Models: UXBP24, UXBP24L, UXABP48 • Do not move the UXBP with its batteries installed. Doing so may result in damage to the Battery Pack and/or a shock hazard. • Install only factory-authorized batteries in the UXBP . Improper batteries may result in a hazardous chemical spill and/or a shock hazard.
4 . Installation 4.1 Receiving inspection When you remove the UXBP from its shipping container, inspect it for damage that may have occurred in transit. Immediately notify the carrier and place of purchase if any damage is found. The packing materials are made from recyclable materials and should be saved for reuse or disposed of properly.
UXBP24L UXBP24 and UXABP48 - If you have a UXBP24 or UXABP48, slide the second battery all the way to the rear of the cabinet beside the first battery. UXBP24 and UXABP48 7. Connect the second battery’ s coupler to the matching coupler mounted on the side of the enclosure and route the battery cable over the top of the battery.
5. S toring the Battery Pack The Battery Pack should be stored in a covered location and with its batteries in a fully-charged state (reports 100% capacity to the UPS). In extended storage, use the UPS to refresh the Battery Pack every six months in environments where the temperature is –15 to +30 °C (+5 to +86 °F).
An important point after buying a device APC UXABP48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC UXABP48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC UXABP48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC UXABP48 you will learn all the available features of the product, as well as information on its operation. The information that you get APC UXABP48 will certainly help you make a decision on the purchase.
If you already are a holder of APC UXABP48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC UXABP48.
However, one of the most important roles played by the user manual is to help in solving problems with APC UXABP48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC UXABP48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
