Instruction/ maintenance manual of the product WAP-6101 LevelOne
Go to page of 49
LevelOne User Manual W AP -61 01 300Mbp s Wireless Ceiling Gigabit PoE Access Point.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point T A BLE OF CONTENTS WAP - 6101 .................................................................................................................................................... 1 300M BPS W IRELESS C EILING G IGABIT P O E A CCESS P OINT .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.3.2 System Status ......................................................................................................................... 34 3.3.2.1 W eb Log ...........................
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retriev .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Chapter 1 Introduction Congratulations on your purchase of this out standing product: AP C772 AM -P0 1 Business Access Point are designed .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Hard w are Inst allation 1.2.1 W ARNING 1.2.2 SYSTEM REQUI REMENTS Network Requirements An Ethernet-based Cab le or DSL mode m IEEE 802.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point latest version of Java installe d. Visit www .ja va.com to download th e latest versi on. CD Installation W izard Requir ements Computer with the f ollowing: W i ndows® 7, Vista® , or XP with Service Pack 2 An installed Ethernet adapter CD -ROM drive 1.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 1.2.4 LED Indicators WEC/Reset Button S tatu s LED W iFi LED LA N LED.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point LED Description S tatus Change Master Mode / Slave Mode W hen System is ready: (w ithout click button.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Chapter 2 Getting St arted Please use windows EZ setup utility or W eb UI wiz ard to en ter the setup process. 2.1 Easy Setup by Configuring Web UI You can also browse web UI to configure the d evice.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Select “Wizard” for basic settings in a simple w ay. Or, you can go to Basic Net work / A dvanced Netw ork / A pplication s / Sy stem to setup the configuration by your own selection. Press “Next” to start the Setup Wizard.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Step 2 Entry LAN IP Address. Step 3-1 W irel ess setting. Step 3-2 W irel ess authentication and encryption.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Step 5 System is applying the setting. Step 6 Click finish to complete it..
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 2.2 Use WEC Button to Setup Wireless Profiles W EC Button is W ireless Easy Connection. There are 2 purposes for this Button.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Configure Slav e AP via WEC Button Step 1 Check W iFi LED of Access Point which acts as Master Mode.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Chapter 3 Making Configurations W hen ever you want to configure your network or this device, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the device.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Afterw ards, you can go Wizard, Basic Network, Adv anced Network, A pplic ation or System respectively on left hand side o f web page. Note: Y ou can see the Connection S tatus scr een below aft er you logged in.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.1 Basic Net w ork You can enter Basic Network for Ethernet L AN and Wirele ss setting s as the icon here shown 3.1.1 Ethernet L A N This device supports two types as Follows: Static IP : A llow a device to act as a Static host.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.1.2 Wireless W irel ess settings allow you to set the W LAN (W iFi) configuration items. W hen the wireless conf iguration is done your W iFi L AN is ready to suppo rt y o ur local W iFi devices such as your laptop PC, wireless printer and some portable wireless devices.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.1.3.1.1 A P Onl y Mode W hen acting as an access point, this device connects all th e w ireless st ations to a wired network and the WAN Port is disabled consequently . 1. Wireless Module: Enable the wireless function.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 5. Network ID (SSID): Network ID is us ed for identifying the W ireless LA N ( W LAN). Client stations can roam freely over t his device and o ther Access Points that have the same Network ID.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point then f ill in 64 hexadecima l (0, 1, 2…8, 9, A, B…F) d igits , o r 8 to 63 ASCII characters as the sh ared key. The key value is shared by the RADIUS server and this device. This key value must be consistent with the key va lue in the RADIUS server .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point . 1. Lazy Mode: This device support the Lazy Mode to automatically learn the MAC address of W DS peers, you don ’ t h ave to input other peer AP's MAC address .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point when there is no wireless traf fics. 3. Wireless Schedule: The wireless rad io can be turn of f according to t he sche dule rule you specified. By default, the wireless radio is always turned on w hen the wireless module is enabled.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 1. Green AP: Enable the Green AP function to reduce the po w er consumption when there is no wireless traf fics. 2. Channel: The radio channel number . The per missible channels depend on the Regulatory Domain.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 4. Remote AP MAC 1 ~ Remote A P M AC 4 : If you do not enable the La zy mode, you have to enter the wireless MAC address for each W DS peer one by one. Afterw ards, click on “Save” to store your settings or click “Undo ” to give u p the changes.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 1. Green AP: Enable the Green AP function to reduce the po w er consumption when there is no wireless traf fics. 2. Network ID (SSID): Network ID is us ed for identifying the W ireless LA N ( W LAN).
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Afterw ards, click on “Save” to store your settings or click “Undo ” to give up the changes. 3.1.3.2 Adv anced Wireless Setup This device provides ad vanced wireless setup for professional user to optimiz e the wireless performance under the specific inst allation environment .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point coverage. 5. DTIM inter v al : A DTIM is a coun td own inf orming clients of the next window f or listening to broadcast and m ulticast me ssages.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.2 A d vanced Network This device also support s many advanced network f eatures, such as Firewall, and Management. You can finish those configurations in this section. 3.2.1 Fi rewall The firewall includes MAC Address Control.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 2. A ssocia tion control : Check "Association control" to enable the contro l of which wireless clien t can associate to the wireless LAN. If a cli ent is denied to associate to the wireless LAN, it means th e client can't send or receive any data via this device.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 1. Enable SNMP : Enable this Function. 2. SNMP Version: Supports SNMP V1, V2c , and V3. 3. Get Community : The community of GetRequest that this device will resp ond . This is a tex t p assword mechanism that is use d to weakly authenticate q ueries to agents of managed netw ork devices.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 5. SNMPv3 Settings: User 1 /2 : This device supports up to two SNMP management accounts. Y ou can specify the account permission as “ Read ” or “ Read/Write ” respectively .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.3.1 System Informa tion You can view the System Information in this page. 3.3.2 System St atus 3.3.2.1 Web Log 1. Log T y pes : You can select the log types to be collected in the web log area.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point This device can also export system logs to sp ecific destination b y m eans of syslog (UDP) and SMTP(TCP). W ith e nabl ed Syslog function, this device will send log to a certain host periodically .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3. SMTP Username: Enter the Userna me offered by y our ISP . 4. SMTP Password: Enter the password of fered by your ISP . 5. E-mail A ddre sses: The recipients are th e ones who will receive these logs.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Press “browse” button to indicate the f ile n ame of new f irmware, an d then press Upgrade button to start to upgrade new f irmw are on th is de vice. If you want to upgrade a f ir mware which is f rom GPL policy, plea se check “Accept unofficial firmware”.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.3.3.3 S y stem Time If new firmware is available, you can upgrade device firmware through the WEB GUI here . 1. T ime Zone : Select a time zone where this device locates. 2. A uto-S y nchronization : Check the “E nable” checkbox to enab le this function.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point 3.3.3.4 Others In this sectio n you can do system backup, reset to d efault, system reboot settings and ping test. 1. Backup Setting : Y ou can backup your settings b y c licking the “ Back up” button and save it as a bin f ile.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point You ca n set UI administration time -out duration give rem ote administration h ost port in this page. W hen the ho st port is given please remember to check the enable bo x and save your settings.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point CHAPTOR 4 Troubleshooting This Chapter provides solutions to problems for the installation and operation of the W iFi Concurrent N300 Business AP. You can refer to the following if you are having problems.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point installation steps listed below are applicable for all network adapters. 1. Go to Start > Right click on “My Computer” > Properties . 2. Select the Hardware Tab . 3. Click Device Manager .
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point IV. Turn off the W iFi Concurr ent N300 Business AP and the client, then restart it and then turn on the client again. V. Ensure that the LEDs are indicating normally . If not, make sure that the power and Ethernet cables are firmly connect ed.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point your A ccess P oint and W ireless adapter to a different channel to avoid interference. III. Ke ep your product away from electrical devices that generate RF no ise, like microwaves, monitors, electric motors, etc.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point Due to Limited environment, End-user uses Universal Repeater to ex tend Network access . For example: 1.Add AP2 ,AP3,AP4 to deploy 2.Switch AP2 ,AP3 and AP4 as Slave Mode v ia W EC Button 3.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point udhcp client fdisk GPLv2 util-linux 2.12q mke2fs, e2fsck GPLv2 e2fsprogs v1.40.2 samba GNUv2 samba 3.0.20 wireless tools GPLv2 wireless tools vsfptd GPLv2 vsftpd-2.0.3 Transmission MIT T ransmission- 1.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point T o protect your rights, we need to m ake restrictions that forbid anyone to deny you th ese rights or to ask y ou to surr ender t he r ights. The se restrictions trans late to certain responsibilities for you if you distribute copies of the software, or if y ou modif y it.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point normally print s uch an announcem ent, your work based on the Program is not required to prin t an announcement.
WP A-6101 300Mbps Wirel ess Ceiling Gigabit PoE Acce ss Point you cannot distribute so as to satisf y simultaneousl y y our obl igations under this License and any other pertinent obligations , then as a consequence you m ay not d istribute the P rogra m at all.
An important point after buying a device LevelOne WAP-6101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LevelOne WAP-6101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LevelOne WAP-6101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LevelOne WAP-6101 you will learn all the available features of the product, as well as information on its operation. The information that you get LevelOne WAP-6101 will certainly help you make a decision on the purchase.
If you already are a holder of LevelOne WAP-6101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LevelOne WAP-6101.
However, one of the most important roles played by the user manual is to help in solving problems with LevelOne WAP-6101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LevelOne WAP-6101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
