

FPS-3003
Quick Install Guide
English
Deutsch
Nederlands
Italiano
Español
Português
Français
Ελληνικά
2-port USB/MFP Server


Power Link Status USB1 USB2



Fig3 MFP Server Control Center software

Fig 4 Set Server name and code page.


Fig5 TCP/IP setting of FPS-3003


Fig 7 Printer setting
Fig6 Add printer


Fig 8 Network Scan button

Fig 9 Scanner interface

Congratulate on your purchase of this LevelOne FPS-3003, 2-port USB/MFP server. This document describes the steps for installation and configuration of FPS-3003 as a Print/File/Scan server in Windows environment. Refer to the User’s Manual in the bundled CD-ROM for more details. This Setup Guide is only for Windows users. If you use FPS-3003 in Unix/Linux, please refer to the User’s Manual in the bundled CD-ROM for more details.
Please refer to Fig1, physical description. 1. Connect FPS-3003 to the network, such as a LAN switch or a LAN hub, using a LAN cable. 2. Connect FPS-3003 to USB printers, hard drives, flash ROM disks, or HP OJ (Office Jet) series printers (MFP) using USB cables. 3. Connect FPS-3003 to the power jack using the power adaptor (included in this package).

Using Control Center Software(Fig3):
i. Open the FPS-3003 Control Center. It will automatically search the existing servers and display their status. ii. Select the server that you want to configure. Double click the selected server and enter Administrator (default: admin) and Password (default: admin). iii. Name your FPS-3003 server and select a code page for file server function as Fig4. Please enter server’s host name and workgroup for Windows networking by SMB protocol. If you want to use the file server function, you have to set the same code page as that your Windows PC is using. iv. Assign IP address to FPS-3003 as Fig5. Please choose the one method to set the IP address of the server. You can automatically get IP by using DHCP or manually assign an IP to the server.

Before processing the printer settings, please make sure that you have installed the accordingly printer driver in your local computer.
You can set up your network printer using steps below. Step 1 Set up Local Window Printer Driver. Step 2 Connect your printer to MFP server Step 3 Connect MFP server to network. Step 4 Turn on your printer and MFP server Step 5 Configure your MFP server. Step 6 Add Network Printer by standard windows add printer wizard or PC user software. Note:. If you use the HP Office Jet series printer, you are advised to connect the MFP to PC before installing the driver Add Network Printer
Use Add Printer Function of User Software
1. Start MFP Control Center, select your MFP server and click Add Printer.(Fig 6) 2. Select USB1 Port or USB2 Port in Add printer box, choose to use IP Address or Host Name to represent MFP Server in printer port, and select Printing with LPR (Line Printer Remote) or Print with Network Path(SMB) in Select the network printing protocol box.(Fig 7) # LPR protocol is compatible for windows 2000/XP /2003. SMB protocol is compatible for windows 98SE /ME/2000/XP/2003. By SMB protocol, the PC recognize the printer by printer name, which allows you to connect the printer in USB1 or USB2 port as you need.
# If your server is running on a different LAN than your Windows PC such as wireless Windows PC, you must choose IP address in IP Address or Host Name box.

- File System: This product supports a file format of FAT12/16/32. It will not support a drive formatted by NTFS, etc. - Naming Your Storages: The local drives of the two storages in USB1 port and USB2 port are named as USBx_DxPx, where USBx represents the USBx port, Dx represents the the x-th Disk and Px represents the x-th partition. - Setting MFP Server Codepage: MFP Server supports Windows code pages. If you want to communicate files with FPS-3003 MFP server, you have to set your MFP server code page to be same as the code page that your Windows PC is using.
- Using SMB Method for Sharing Storages
1. Connect a USB storage device to this product. 2. Select My Network Places 3. Click Display the Computers of Workgroup 4. Double click Microsoft Windows Network icon. 5. Double click the Workgroup that MFP server belongs to. The default Workgroup name is “LevelOne”. You can refer to MFP Control Center or server’s web pages to get it. You will see that the MFP server will be displayed as the default host name "FPS-3003" or the host name that you set. 6. If you can not find Workgroup name of MFP server in
Use File Sharing

Microsoft Windows Network, you can select Search Computer in My Network Places and type the server’s hostname or IP address (ex, default host name “FPS-3003” ) to find it. 7. Double click this host name icon. The folders will be displayed as USB1_DxPx, and USB2_DxPx where Dx represents the x-th disk and Px represents the x-th partition with respect to USB1 port and USB2 port . 8. Double click the one of folders to open the folders over the network.
- Using FTP Method for Sharing Storages
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.