
WITH AM/FM STEREO RECEIVER

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Rating plate and caution marking are marked on the bottom enclosure of the apparatus.
instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
S3152A 13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus.
Do not apply oil or petroleum products or solvents to any part of this set.
Please read important information displayed on the rating plate located on the bottom enclosure before connecting to AC Mains or any operation.
FCC NOTES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.

You can use the AC power or batteries as a power source.

BATTERY DOOR (on the bottom of the set)
Insert 8 size “C” batteries (not supplied) into the battery compartment as shown. Observe (+) and (–) polarities.
To use the player on batteries, disconnect the AC power cord from both the outlet and the back of the player.

Install Batteries as illustrated

FUNCTION switch (at the left

side of the set)
Connect the supplied AC power cord or batteries (refer to page 3).
Slide the FUNCTION switch to the CD/MP3/AUDIO IN position (power on), the LCD display will be on, and the word “READING ” will show in the display.

Lift the CD DOOR to open it and push a CD down onto the center spindle. The label side of the CD disc should face upward.
Close the CD DOOR. The display will show the total tracks and total playing time of that CD, then the player will begin to read and play it automatically.
Track number currently playing


of the current track
Press PLAY/PAUSE, the word “PAUSE” will show in the display and the elapsed playing time of the currently playing track will flash during pause. Press again to resume play after pause.
Go to the next 10th track Press the 10+/ALBUM button.
or Press and hold down while playing till you find the point.
Press the STOP button first, then lift the CD DOOR.
Slide the FUNCTION switch to the OFF position, LCD display turns off.
Elapsed playing time

You may have repeat, intro and random play functions by pressing the MODE button. Press the MODE button several times, the display will show the followings in turn:
Single Track Repeat
Plays one song over and over till you press STOP.
Select the song you want to repeat with either of the SKIP/ SEARCH buttons ( or
), or 10+/ALBUM button. Press the MODE button once, REPT 1 will show in the display.
The song currently playing will repeat over and over until you press the STOP button.
Repeats all songs in order till you press STOP.
Press the MODE button twice, REPT ALL will show in the display.
All the songs will keep playing in sequence 1, 2, 3, etc. and when finished, the player will start all over again until you press the STOP button.
This plays the first 10 seconds of each song in sequential order.
Press the MODE button three times, INTRO will flash in the display. Press the PLAY/PAUSE button once, the first 10 seconds of each song on the CD will play in sequential order, INTRO will stop flashing and show in the display.
When you find a song you like, press the PLAY/PAUSE button again, INTRO will not show in the display, normal play will be resumed, that song (and the following songs) will play normally.
This plays the songs on the disc in random order.
Press the MODE button four times, RANDOM will flash in the display. Press the PLAY/PAUSE button once, the player begins random play, RANDOM will stop flashing and show in the display.
Press the SKIP/SEARCH button to skip to the next random song.
To quit random play, press the MODE button once again, the player will play normally.

You can make a program up to 20 tracks in the specified order you want them to be played.
etc.
1 etc.
CD
) or 10+/ ALBUM button to select the tracks to be programmed in the order that you want.
CD
CD
NOTE:
Just create a new program following the above programming procedure.
Press the STOP button twice, the symbol PROG will disappear from the display.
EQUALIZER FUNCTION During play, you may select the tone type by pressing the PROGRAM/EQ button to choose the tone type. The display will show what you selected: DBB, POP, CLASSIC, JAZZ, ROCK or NORMAL.
Programming Example · Program number · Track number

Connect the supplied AC power cord or batteries (refer to page 3).


To turn off the power STOP button once and slide the FUNCTION to OFF position.
To skip to the next track(s)
SKIP/SEARCH button once (or repeatedly).
To skip to the previous track(s)
button once (or repeatedly).
Press the 10+/ALBUM button once, every time you press it, the player will skip to the next 10th track or the end track of the album.
To skip to the next 10th track(s) quickly
During play or in STOP mode, press and hold the 10+/ALBUM button, the album number flashes, press the SKIP/SEARCH buttons (
or ) to choose the album. To select the track in the album, press and hold the 10+/ALBUM button again, “001” flashes, press the SKIP/SEARCH buttons (
To change the album(s) and track(s)
or ) to choose the track. Press the PLAY/PAUSE button to start the selected album and track play.
Press the PROGRAM/EQ button to choose the tone type during play. The display will show what you selected: DBB, POP, CLASSIC, JAZZ, ROCK or NORMAL.
To change the Tone type

MP3 REPEAT, INTRO AND RANDOM PLAY You may have repeat, intro or random play functions by pressing the MODE button. Press the MODE button several times, the display will show the followings in turn:
REPT 1 REPT DIR REPT ALL INTRO RANDOM NORMAL PLAY
Single Track Repeat Plays one song over and over till you press the STOP button. Select the song you want to repeat with either of the SKIP/ SEARCH buttons (
or ) or 10+/ALBUM button. Press the MODE button once, REPT 1 will show in the display. The song currently playing will repeat over and over till you press the STOP button.
All Tracks Repeat (Directory Repeat) Repeats all single album songs in order till you press the STOP button. Select the directory (or album, folder) that you want to repeat with 10+/ALBUM button and the SKIP/SEARCH buttons (
or ). Press the PLAY/PAUSE button, then press the MODE button twice, REPT DIR will show in the display. All the songs of that directory will keep playing in sequence 1, 2, 3, etc. and when finished, the player will start all over again until you press the STOP button.
All Tracks Repeat (Disc Repeat) Repeats all songs in order till you press the STOP button. Press the MODE button three times, REPT ALL will show in the display. All the songs of the MP3 disc will keep playing in sequence 1, 2, 3, etc. and when finished, the player will start all over again until you press the STOP button. Intro Play This plays the first 10 seconds of songs in sequential order. Press the MODE button four times, INTRO flashes in the display. Press the PLAY/PAUSE button, the first 10 seconds of each song on the MP3 disc will play in sequential order, INTRO will stop flashing and show in the display. When you find a song you like, press the PLAY/PAUSE button again, normal play will be resumed, that song (and the following songs) will play NORMALLY.
REPT ALL MP3
MODE
INTRO MP3
Random Play This plays the songs on the disc in random order. Press the MODE button five times, RANDOM will flash in the display. Press the PLAY/PAUSE button, this will play all of the songs in random order selected by the player, RANDOM will stop flashing and show in the display. Press the SKIP/SEARCH button, to skip to the next random song. To quit random play, press the MODE button again, the player will resume play normally.
RANDOM MP3

The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed).

etc.
etc.
During programming, the symbol “PROG” shows in the display. To program play in your preferred order, follow steps below:
or ) buttons to select the title number 3 (example).
To change the current program Just create a new program following the programming procedure.
To cancel programmed play Press the STOP button twice, the symbol PROG will disappear from the display.

MP3 files are music files which have been compressed into the MP3 format. WMA is the abbreviation for Windows Media Audio. WMA is another audio format, the compression and the audio quality are better than MP3. The CD-2087 plays MP3 & WMA files which have been recorded onto a CD disc.
MP3 or WMA files, the CD-2087 can play MP3, WMA and normal music files but not if they are mixed on one CD. • To download an MP3 file (song) from a website (like www.mp3.com), go to http: //www.mp3.com and you can find a search link at the top of the homepage that allows you to search for MP3 files. Input a key word and click on that link and you will find many songs by many new artists. To download an MP3 file, click on software, then get MP3 link or newer software, register and click on download. We recommend you make a new folder for your MP3 files.

WHAT IS MP3? MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing a sound sequence or song. The file is compressed to about 1/10 of its original size. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed.
SETTINGS FOR COMPRESSION SOFTWARE AND WRITING SOFTWARE • To compress a source for an MP3 file, we recommend setting the transfer bit rate of the compression software to
PLAYABLE “MP3” FILES ON THIS PLAYER You can only play MP3 files recorded by following requirements.
Do not save unnecessary folders or files other than MP3 or WMA ones in the disc to be used for MP3 listening.
DO NOT record any other files other than MP3 or WMA files on the CD disc. If you record non-mp3 files onto the CD disc, the player may not operate properly. Please record only MP3 or WMA files onto the CD disc.
MP3 filetl

FUNCTION switch (at the left

side of the set)
Open the USB &
Connect the supplied AC power cord or batteries (refer to page 3).
Slide the FUNCTION switch to the USB/SD position (power on), the LCD display will be on, and the words “WAIT DEVICE ” will show in the display. (Set is waiting for the device.)
CD/MP3/AUDIO IN USB/SD
With the label side
To open, lift the USB & SD/ MMC cover, and insert an SD/MMC card (not included) into the SD slot . The label side of the card should face upward.

After inserting the card, the player will begin to play it automatically. (If you previously copied songs to the card from your computer or MP3 player.)
4 After using, press the STOP button, the display will show the total album numbers and total track numbers of the SD/MMC card, and then remove the card from the slot.
TIP: 1. When playing an SD/MMC card, all the operations such as SKIP, REPEAT, INTRO, RANDOM, PROGRAM etc. are the same as when using an MP3 disc. You can refer to the details on page 9 to 11. 2. The tracks (songs) on the SD/MMC card can be programmed (arranged in advance) to play in any order you prefer (up to 64 tracks can be programmed).

Connect the supplied AC power cord or batteries (refer to page 3).
Slide the FUNCTION switch to the USB/SD position (power on), the LCD display will be on, and the words “WAIT DEVICE ” will show in the display. (Set is waiting for the device.)
CD/MP3/AUDIO IN USB/SD
To open, lift the USB & SD/ MMC cover, and connect the smaller plug of the USB cable (not included) to the USB port of your flash memory stick or MP3 player, and connect the larger plug of the USB cable to the USB jack of the set.
After connecting, the player will begin to play the songs from your flash memory stick or MP3 player automatically.

1. When playing from a flash memory stick or MP3 player, all the operations such as SKIP, REPEAT, INTRO, RANDOM, PROGRAM etc. are the same as when using an MP3 disc. You can refer to the details on page 9 to 11. 2. The tracks (songs) on the flash memory stick or MP3 player can be programmed (arranged in advance) to play in any order you prefer (up to 64 tracks can be programmed). 3. When you insert an SD/MMC card into the SD/MMC slot and connect the player with a flash memory stick or MP3 player at the same time, the player will play the music on the SD/MMC card automatically. You can stop the playback, then press the USB/SD button to enter USB mode and play the songs from the USB cable device. 4. Some MP3 players have an SD/MMC card slot for inserting an SD/MMC card as extra memory. When you connect an MP3 player that has an SD/MMC card inserted into it to the set, only the songs in the MP3 player’s flash memory can be played, the songs on the SD/MMC card cannot be played. If you want to listen to the songs on the SD/MMC card, please take out the card and insert it to the CD-2087’s SD/MMC slot.
You can enjoy the music of a digital MP3 player, computer or any other external audio device (with a 3.5mm stereo jack) through the set.

(3.5 mm)
(3.5 mm)
MP3, the set will exit CD or MP3 mode and switch to AUDIO IN mode automatically.

Connect the supplied AC power cord or batteries (refer to page 3).
Slide the FUNCTION switch to the RADIO position, the LCD display will turn on, and the current tuner station will show in the display.
Slide the BAND switch to the proper band position (AM, FM, or FM STEREO) that you want.
3 Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. The display will show you the frequency of the station tuned in. This is useful when you know the station’s frequency.

TIP
Slide the FUNCTION switch to OFF position
Turn off the Radio • Next time you want to listen to the radio, just slide the FUNCTION switch to the RADIO position. The player will automatically start playing the previously tuned station. You can verify this by seeing the frequency in the display.
To improve broadcast reception Change the position of the antenna for FM or FM Stereo. Move the set itself for AM.
or rotating.

On Operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the DISC player section. Should this occur, the player will not operate properly. In this case, remove the DISC and wait about an hour for the moisture to evaporate.

Cleaning the lens A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use a cotton swab very slightly dampened with alcohol to clean the lens.
Cleaning the cabinet Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soapy water, and then wipe clean.
Cleaning the Discs • Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic dirt, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.
To remove the Disc Open the CD DOOR by lifting the CD DOOR, hold the disc by the edge while slightly pressing on the center spindle, then lift it from the edge to release and remove.

The power is not on.
“NO DISC” or “BAD DISC” appears in the display even when a disc is in place.
Discs do not play.
The sound drops out.
CD/MP3 does not play while the radio continues to play on battery power.
MP3 playback does not work or stops.
The sound is weak or has poor quality.

Power source:
AC 120V, 60Hz DC 12V (8 size “C” batteries, not included) (Alkaline batteries are recommended)
Width: 15 1/2" Depth: 10 3/8" Height: 6 1/2" Weight: 5.6 LBs (without batteries) CD/MP3 Section
Frequency response: 50Hz - 15kHz +1/-2dB Laser wavelength: 760 - 800 nM Error correction method: CIRC Pickup: Optical 3-beam semiconductor laser (780 nm wavelength)
NOTE: CD-Rs or CD-RWs playback capability at this CD/MP3 player may vary depending on quality of media, CD-Burner, speed of burning and application software. Also digital rights management may prevent copying some songs to discs, read the information on the web sites for more information.
We reserve the right to make design and specification changes for product improvement. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improve- ment or modification without prior notice. The English version serves as the final reference on all product and operation details should any discrepancies arise in other languages.
PROTECT YOUR FINE FURNITURE! WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 1 year after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 1 year period after original purchase, we will service the set that is returned to LENOXX ELECTRONICS CORP, prepaid, at no charge. After the initial 1 year period expires, we will exchange, at no charge, any part that is defective, but will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse, neglect or accident. This warranty does not cover broken cord or cabinet. UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. The following charges apply to repairs beyond the warranty period: $15.00. Be sure to pack carefully and return postage paid insured together with your money order (personal checks will not be accepted) and sales receipt to: LENOXX ELECTRONICS CORP., 35 BRUNSWICK AVENUE, EDISON, N.J. 08817, USA
For Customer Service Dial: 1-800-315-5885 (MONDAY - THURSDAY 8:00 AM - 5:00 PM, FRIDAY 8:00 AM - 1:30 PM EST) or Visit Our Website: http://www.lenoxx.com or Email: evergo@att.net
© 2006 LENOXX ELECTRONICS CORP.
EDISON, N.J. 08817, USA MADE & PRINTED IN CHINA
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.