EN
Lenoxx Electronics logo
Official user manual

Lenoxx Electronics Portable CD Player (CD-103)

20 pages·1.3 MB·Portable CD Player·PDF·ENDEFRITNLJA
Lenoxx Electronics Portable CD Player (CD-103)
Table of Contents 80 sections COMPACT DISC PLAYER · AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDER · MODEL CD-103/BP-103 OPERATING INSTRUCTIONS · PLAYS MUSIC COMPACT DISCS · … ShowHide
COMPACT DISC PLAYERp.1AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDERp.1MODEL CD-103/BP-103 OPERATING INSTRUCTIONSp.1PLAYS MUSIC COMPACT DISCSp.1• • •p.1FULLY PROGRAMMABLE CD PLAYER WITH REPEATp.1RECEIVES TV BAND AND WEATHER BANDp.1RECEIVES AM/FM BROADCASTSp.1RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONEp.1• •p.1FM STEREO AND POWER LED INDICATORSp.12 WAY POWER - AC/DCp.1PLEASE READ CAREFULLY BEFORE USEp.1WARNINGp.2RISK OF ELECTRIC SHOCKp.2DO NOT OPENp.2IMPORTANT SAFETY INSTRUCTIONSp.2ADDITIONAL SAFETY INSTRUCTIONSp.3BATTERY SAFETY INSTRUCTIONSp.4SAVE THESE INSTRUCTIONSp.4CHOOSING THE POWER SOURCESp.5AC SOCKETp.51. Connecting the AC power cordp.5Tip • If the plug of the AC powerp.52. Using the player on batteriesp.5• Replace the batteries whenp.5• If the CD does not playp.5PLAYING A CDp.6PLAY/PAUSEp.6TIPp.7LISTENING TO THE RADIOp.8POWERp.8FM STEREOp.8PLAYING A TAPEp.10USE THESE BUTTONS FOR ADDITIONAL OPERATIONSp.11VOLUME CONTROLp.11MICROPHONEp.11PAUSE STOP/EJECTp.11PLAYp.11PHONES JACKp.11FAST F.&REWINDp.11RECORDING ON A TAPEp.12STOP/EJECTp.12TAPE PLAY DIRECTIONp.12FULL REEL EMPTYp.12REELp.12INSERT TAPE THIS WAYp.12FULL REEL ON RIGHTp.12RECORDp.12OK NOp.12REWIND PLAYp.12FUNCTION SWITCHp.13PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY)p.14PROGRAM BUTTONp.14PLAYING CD TRACKS IN PROGRAMMED ORDERp.15Programmed Playp.15PROGRAMp.15PLAY/ PAUSEp.15REPEATp.15PRECAUTIONS On Safety • As the laser beam used in the CDp.16On Power Sources • For battery operation, use 6 size “C”p.16On Operation • If the player is brought directly from ap.16On Placement • Do not leave the player in a locationp.16or unstable place. • Do not place anything within 1 inch ofp.16• If you have any questions or problemsp.16Notes on Cassettes • Break off the cassette tab from side Ap.17• Do not use solvents such as benzene,p.17• To record on a tape with its tab brokenp.17• To reduce the chances of tapep.17ADVICEp.18CAPSTAN COTTON SWABp.18TROUBLE SHOOTINGp.19Problem Remedyp.19• Connect the AC power cord to a wall outletp.19securely. • Make sure the batteries are insertedp.19General CD player Radio Tape playerp.19• Make sure the FUNCTION switch is in the correctp.19position. • Adjust the volume. • Unplug the headphones when listening throughp.19damaged. • Place the player in a location free fromp.19• Make sure the recording tab on the cassette is inp.19
Page 1 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PLEASE READ CAREFULLY BEFORE USE
Page 1 · click to enlarge
Page 1

COMPACT DISC PLAYER

AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDER

MODEL CD-103/BP-103 OPERATING INSTRUCTIONS

Lenoxx Electronics Portable CD Player (CD-103) — AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDER diagram (page 1)
Fig. 1

•

PLAYS MUSIC COMPACT DISCS

• • •

FULLY PROGRAMMABLE CD PLAYER WITH REPEAT

RECEIVES TV BAND AND WEATHER BAND

RECEIVES AM/FM BROADCASTS

•

RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE

• •

FM STEREO AND POWER LED INDICATORS

2 WAY POWER - AC/DC

•

REQUIRES 6 SIZE “C” BATTERIES (not included)

PLEASE READ CAREFULLY BEFORE USE

®

Page 2 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — IMPORTANT SAFETY INSTRUCTIONS
Page 2 · click to enlarge
Page 2

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, install in accordance with the manufacturer’s

instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightening storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus.

Page 3 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — ADDITIONAL SAFETY INSTRUCTIONS
Page 3 · click to enlarge
Page 3

ADDITIONAL SAFETY INSTRUCTIONS

1. Power Sources - The appliance should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids

are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance beyond that described in

the operating instructions. All other servicing should be referred to qualified service personnel.

It is the intent of Lenoxx that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever recording songs from the RADIO or CD’s.

Do not apply oil or petroleum products or solvents to any part of this set.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Page 4 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — SAVE THESE INSTRUCTIONS
Page 4 · click to enlarge
Page 4

BATTERY SAFETY INSTRUCTIONS

1. Use only the type and size of batteries mentioned in the operating instructions manual (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Be careful when handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may over heat and cause burns. 5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak corrosive electrolyte or explode. 6. Do not attempt to rejuvenate the batteries identified for use with this product by heating them. Sudden release of the battery electrolyte may cause burns or irritation to eyes or skin. 7. All batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the batteries. 8. When inserting batteries into this product, the proper polarity ( and ) or direction must be observed. Reverse insertion of some or all of the batteries may result in battery electrolyte leakage or explosion. 9. Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during the period the batteries could leak, damaging the product. 10. Discard weak or dead batteries as soon as possible since they are more likely to leak in the product. Batteries should be replaced (depending on the product) when the display gets dim or if the Low Battery Indicator shows or if the sound gets distorted. 11. Do not store this product in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 12. If this product does not operate normally, see TROUBLE SHOOTING in this instruction manual. If you can’t resolve the problem, or if the product is damaged, refer to the LENOXX WARRANTY INFORMATION. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch your skin, and discard the leaking batteries. 14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.). 15. The use of rechargeable batteries is not recommended for this set because their voltage and life is lower than standard batteries. 16. Installation of batteries should be done by an adult only.

SAVE THESE INSTRUCTIONS

Page 5 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — • If the CD does not play
Page 5 · click to enlarge
Page 5

CHOOSING THE POWER SOURCES

You can use the AC power or batteries as a power source.

AC SOCKET

Lenoxx Electronics Portable CD Player (CD-103) — AC SOCKET diagram (page 5)
Fig. 2

and outlet is wider.

1. Connecting the AC power cord

Tip • If the plug of the AC power

Insert one end of the supplied AC power cord into the socket located at the rear of the player, and the other end to the wall outlet.

cord does not match your outlet, do not force it. Reverse it and try again. This plug is polarized and only fits one way into the wall outlet and the back of the set.

2. Using the player on batteries

Insert 6 size “C” batteries (not supplied) into the battery compartment.

• Replace the batteries when

the Power Lamp dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3.

To use the player on batteries, disconnect the AC power cord from the player.

Lenoxx Electronics Portable CD Player (CD-103) — • Replace the batteries when diagram (page 5)
Fig. 3 · • Replace the batteries when

• If the CD does not play

on batteries, this means the batteries are almost used up. But the radio may continue to play on these weak batteries because it uses less power than the CD player.

Battery compartment

Page 6 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PLAY/PAUSE
Page 6 · click to enlarge
Page 6

PLAYING A CD

Lenoxx Electronics Portable CD Player (CD-103) — PLAYING A CD diagram (page 6)
Fig. 4

Connect the supplied AC power cord or batteries (see page 4).

Lenoxx Electronics Portable CD Player (CD-103) — PLAYING A CD diagram (page 6)
Fig. 5

Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. And the display will show 2 dashes “ ” flashing , then “ ”.

Lift the right corner of the CD DOOR to open it and place the CD in the CD compartment. The label side of the CD should face upward.

3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD.

Press the CD PLAY button. The POWER and PLAY lamps will be steady on, the player plays all the tracks once.

PLAY/PAUSE

PLAY lamp · Track number

Page 7 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — TIP
Page 7 · click to enlarge
Page 7
Lenoxx Electronics Portable CD Player (CD-103) — TIP diagram (page 7)
Fig. 6

TIP

When CD play is paused, the PLAY/ PAUSE lamp will flash and no music will play.

To resume play, press the PAUSE button again, the PLAY lamp will stop flashing and music will play.

Pause playback The PLAY lamp will flash during pause. Press again to resume play after pause.

If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.

BACKWARD or FORWARD Press and hold down while playing until you find the point.

Remove the CD Lift the CD DOOR (press STOP first).

Turn off the power Slide the FUNCTION switch to TAPE position.

Track number

Page 8 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — POWER
Page 8 · click to enlarge
Page 8

LISTENING TO THE RADIO

Lenoxx Electronics Portable CD Player (CD-103) — LISTENING TO THE RADIO diagram (page 8)
Fig. 7

Connect the supplied AC power cord or batteries (see page 4).

Lenoxx Electronics Portable CD Player (CD-103) — LISTENING TO THE RADIO diagram (page 8)
Fig. 8

Slide the FUNCTION switch to RADIO position, the POWER lamp will be on.

Slide the BAND switch to the proper band position (AM, FM, or TV1, TV2 (WEATHER BAND)) that you want. Select AM to tune AM radio stations. Select FM to tune FM radio stations. Select TV1 to tune TV channels 2 through 6. Select TV2 to tune TV channels 7 through 13, including WEATHER BAND.

Tune into the station you prefer using the TUNING control (at the right side of the set). Adjust for the clearest sound.

buzzing will be heard, which results from the video portion of the TV signal. This is normal for all TV band radios. NOTE 2: TV band and Weather Band signals are weaker than

normal FM signals. Most TV band signals have a range of only 50 miles (maximum) from the broadcast station. NOTE 3: Some noise or 2 way radio conversations may be heard

on the TV band or Weather Band, this is normal and results from the weaker signals of these broadcasts. WB may not be received in all areas due to a lack of transmission coverage for those areas or in some fringe areas where TV signals can only be received by using Cable.

4 The FM STEREO indicator will light up when receiving FM Stereo broadcasts.

POWER

FM STEREO

Page 9 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — LISTENING TO THE RADIO
Page 9 · click to enlarge
Page 9
Lenoxx Electronics Portable CD Player (CD-103) — LISTENING TO THE RADIO diagram (page 9)
Fig. 9

Turn off the Radio Slide the FUNCTION switch to TAPE position

To improve broadcast reception Change position of the antenna for FM,TV1 or TV2 (WEATHER BAND). Move the set itself for AM.

Page 10 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PLAYING A TAPE
Page 10 · click to enlarge
Page 10

PLAYING A TAPE

Lenoxx Electronics Portable CD Player (CD-103) — PLAYING A TAPE diagram (page 10)
Fig. 10

Connect the supplied AC power cord or batteries (see page 4).

Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door.

3 Press the PLAY button. The player turns on and starts playing.

When the set finishes playing this side of the tape, the set will stop. To hear the other side of the tape, flip the tape over, then reinsert and press PLAY.

Page 11 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — VOLUME CONTROL
Page 11 · click to enlarge
Page 11

USE THESE BUTTONS FOR ADDITIONAL OPERATIONS

VOLUME CONTROL

MICROPHONE

PAUSE STOP/EJECT

PLAY

PHONES JACK

FAST F.&REWIND

Adjust the volume VOLUME control

Fast forward or rewind the tape

FAST FORWARD button or REWIND button

PAUSE button Press again to resume play after pause.

To enjoy the music without disturbing others

Insert your headphone plug into the PHONES jack.

To shut power off Make sure cassette buttons are all up (stop) and FUNCTION switch is in the center position (power off).

Show 7 more labels / short text on this page
To · Press or Adjust · Stop playback · STOP/EJECT button · Pause playback · Eject the cassette · STOP/EJECT button
Page 12 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — OK NO
Page 12 · click to enlarge
Page 12

RECORDING ON A TAPE

Lenoxx Electronics Portable CD Player (CD-103) — RECORDING ON A TAPE diagram (page 12)
Fig. 11

Connect the supplied AC power cord or batteries (see page 4).

Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, TV1, TV2, CD, or, built-in microphone) you want to record.

STOP/EJECT

TAPE PLAY DIRECTION

A

To record from the CD player, insert a CD and follow the steps to play a CD (see page 5).

FULL REEL EMPTY

REEL

INSERT TAPE THIS WAY

FULL REEL ON RIGHT

To record from the radio, slide the FUNCTION switch to RADIO, and tune into the station you want (see page 7).

To record from the built-in microphone, leave the FUNCTION switch at the TAPE position, and speak in front of the set. 3 Press the RECORD button to start recording. (The PLAY button is depressed automatically.)

RECORD

OK NO

REWIND PLAY

To hear what you recorded, slide the FUNCTION switch to TAPE position, then press REWIND and PLAY. 4

OK NO

/

Page 13 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PAUSE STOP/EJECT
Page 13 · click to enlarge
Page 13

USE THESE BUTTONS FOR ADDITIONAL OPERATIONS

FUNCTION SWITCH

TIP

  • For best recording effect, use the AC power instead of batteries.

PAUSE STOP/EJECT

  • To erase a recording, just start a new recording, and the old one is a u t o m a t i c a l l y replaced.

Stop recording STOP/EJECT button

PAUSE button Press the button again to resume recording. Pause recording

Press the STOP/EJECT button and slide the FUNCTION switch to TAPE position.

Turn off the power

To · Press or Adjust

Page 14 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PROGRAM BUTTON
Page 14 · click to enlarge
Page 14

PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY)

You can play CD tracks over and over in normal or program play modes (see page 14).

Lenoxx Electronics Portable CD Player (CD-103) — PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) diagram (page 14)
Fig. 12

PROGRAM BUTTON

1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press . 3. Press the CD REPEAT button.
Lenoxx Electronics Portable CD Player (CD-103) — PROGRAM BUTTON diagram (page 14)
Fig. 13

a single track (song) Press the REPEAT button once, the REPEAT lamp will flash.

all the tracks (all songs) Press the REPEAT button

During programmed play, press the REPEAT button twice, both the REPEAT and PROGRAM lamps will be steady on.

To cancel Repeat Play Press the REPEAT button until the REPEAT lamp goes off.

To repeat Press · Display shows

Page 15 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — PLAY/ PAUSE
Page 15 · click to enlarge
Page 15

PLAYING CD TRACKS IN PROGRAMMED ORDER

Lenoxx Electronics Portable CD Player (CD-103) — PLAYING CD TRACKS IN PROGRAMMED ORDER diagram (page 15)
Fig. 14

Programmed Play

You can make a program of up to 16 tracks in the order you want them to be played.

PROGRAM

1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped. 2. Press the PROGRAM button. The letters “ ” and the PROGRAM lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM button to confirm. The letters “ ” will flash and the PROGRAM lamp will be steady on. 5. Repeat steps 3 and 4. You can program up to 16 tracks. 6. Press to start programmed play. During the programmed play, the selected track numbers will display in the programmed order. The PLAY and PROGRAM lamps will be steady on.

PLAY/ PAUSE

PROGRAM

REPEAT

PLAY/ PAUSE

PROGRAM

REPEAT

To change the current program Just create a new program following the Programming procedure.

To cancel Programmed Play Press the STOP button twice or slide the FUNCTION switch to TAPE position (POWER OFF).

Page 16 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — • If you have any questions or problems
Page 16 · click to enlarge
Page 16

PRECAUTIONS On Safety • As the laser beam used in the CD

On Power Sources • For battery operation, use 6 size “C”

player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • Should any solid object or liquid fall

batteries. We recommend alkaline batteries for longer life. • When the batteries will not be used

for a few weeks or more, remove them to avoid damage that can be caused by battery leakage or corrosion.

into the player, unplug the player, and have it checked by qualified personnel before operating it any further.

On Operation • If the player is brought directly from a

On Placement • Do not leave the player in a location

near a heat source, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined

cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. • This CD player is designed to be

or unstable place. • Do not place anything within 1 inch of

the back of the cabinet. The ventilation holes must not be covered for the player to operate properly and prolong the life of its components. • If the player is left in a car parked in

the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. • Since a strong magnet is used for the

played on a stable no vibration position. If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.

• If you have any questions or problems

speakers, keep personal credit cards using magnetic coding or springwound watches away from the player to prevent possible damage from the magnets.

concerning your player, please contact our customer service department at 1-800-315-5885. (Monday - Thursday 09:00 AM - 05:00 PM, Friday 09:00 AM - 01:00 PM EST)

Page 17 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — • To reduce the chances of tape
Page 17 · click to enlarge
Page 17

PRECAUTIONS (continued) Notes on CDs • Before playing, clean the CD with a

Notes on Cassettes • Break off the cassette tab from side A

cleaning cloth. Wipe the CD from the center out.

or B to prevent accidental recording.

Tab for side A Tab for side B

• Do not use solvents such as benzene,

thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose the CD to direct

• To record on a tape with its tab broken

off, cover the respective tab hole for side A or B with adhesive tape. • Use of a cassette with more than

sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. • Do not stick paper or stickers on the

90 minutes, such as C-120 (120 minutes), is not recommended. The extreme thinness of this tape may damage this set.

• To reduce the chances of tape

CD, nor scratch the CD.

jamming or tangling, you should check that there are no loose layers of tape visible through the cassette center window. If any, tighten these loose layers of tape using a pencil before inserting the cassette into the set.

• After playing, store the CD in its case.

If there is a scratch, dirt or fingerprints on the CD, it may cause a tracking error or skipping.

Side A

Page 18 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — CAPSTAN COTTON SWAB
Page 18 · click to enlarge
Page 18

MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower.

Lenoxx Electronics Portable CD Player (CD-103) — ADVICE diagram (page 18)
Fig. 15
Lenoxx Electronics Portable CD Player (CD-103) — ADVICE diagram (page 18)
Fig. 16

Cleaning the Tape Heads Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. After cleaning, insert a tape when the areas cleaned are completely dry.

Cleaning the Cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene. RECORD/PLAY BACK HEAD

Lenoxx Electronics Portable CD Player (CD-103) — ADVICE diagram (page 18)
Fig. 17

ADVICE

PROTECT YOUR FINE FURNITURE WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.

CAPSTAN COTTON SWAB

head, you may have to press PLAY first.

Page 19 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — • Make sure the recording tab on the cassette is in
Page 19 · click to enlarge
Page 19

TROUBLE SHOOTING

Problem Remedy

• Connect the AC power cord to a wall outlet

securely. • Make sure the batteries are inserted

General CD player Radio Tape player

The power is not on.

correctly and they are fresh.

• Make sure the FUNCTION switch is in the correct

position. • Adjust the volume. • Unplug the headphones when listening through

There is no sound.

speakers.

• Make sure that the CD compartment is closed. • Place the CD with the label side up. • Clean the CD. • Take out the CD and leave the CD DOOR open for

CD does not play.

about an hour to dry moisture condensation. • Make sure the FUNCTION switch is at CD

position. • Clean the CD, or replace it if the CD is badly

damaged. • Place the player in a location free from

The sound drops out.

vibration. • Check if your batteries are fresh.

CD does not play while radio may continue to play. • It is normal since the radio uses less power than

the CD player.

The sound is weak or has poor quality. • Replace all the batteries with new ones if they are

weak, or bring the set near a window, or rotate the set.

The reception of FM/TV/WB band is weak. • Adjust the length and the angle of the antenna to

change position for better reception.

• Make sure the recording tab on the cassette is in

place. • Make sure the FUNCTION switch is in the correct

The tape does not play or record

position.

• Make sure the tape is inserted correctly.

The tape does not erase completely. • Clean the erasing head (see page 17). • Replace all the batteries with new ones if they

are weak.

Tape jamming or tangling • Use only better quality tapes. • Do not use a cassette with more than 90 minutes. • Make sure there are no loose layers of tape visible

before inserting the cassette.

The sound is weak/The sound quality is poor. • Clean the heads, pinch roller and capstan

(see page 17).

Cassette PLAY button pops up. • The tape has reached its end. Remove it, flip to the

other side and re-insert.

Page 20 of the Lenoxx Electronics Portable CD Player (CD-103) user manual — or Visit Our Website : http://www.lenoxx.com
Page 20 · click to enlarge
Page 20

SPECIFICATION General Description

Power source: AC 120V, 60Hz 12 Watts DC 9V (6 size “C” batteries) (Alkaline batteries are recommended)

Speakers2 - 3 1 /2 ” 8 ohm
Output power1.5W/channel

Dimensions: Width: 14 1/2” Depth: 8” Height: 6 3/4” Weight: 5LBs (without batteries) CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens

Frequency response50Hz - 15kHz +1/-2dB

This set will not play CDRW encoded discs.

Tape Recorder Section

Frequency responseStandard normal bias cassette tape,

70Hz - 10kHz Radio Section Frequency range: FM: 88 - 108 MHz AM: 530 - 1700 kHz

TV1channels 2-6 TV2(WEATHER BAND): channels 7-13

LENOXX reserves the right to make design and specification changes for product improvement.

For customer service Dial 1-800-315-5885 (MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)

or Visit Our Website : http://www.lenoxx.com

© 2002 LENOXX ELECTRONICS CORP.

2 GERMAK DRIVE CARTERET, N.J. 07008 MADE & PRINTED IN CHINA

Ask about the Lenoxx Electronics Portable CD Player (CD-103)

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lenoxx Electronics Portable CD Player (CD-103)

Be the first to ask — other owners or our team will answer.

Original document

Lenoxx Electronics Portable CD Player (CD-103) manual PDF

20 pages·1.3 MB·Portable CD Player·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…