Instruction/ maintenance manual of the product H6977 Lennox Hearth
Go to page of 8
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 1 REFLECTIONS REMOTE CONTROL REPLACEMENT KIT HEARTH PRODUCTS KITS AND ACCESSORIES INST ALLA TION INSTRUCTIONS FOR THE REFLECTIONS REMOTE CONTROL REPLACEMENT KIT (KIT NUMBERS: H1454 AND H6977) P/N 750,251M REV.
2 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 3 Step 9. Locate the fireplace control board (Kit Number H1094) and remove it, including the plastic holders ( Refer to Figure 1 ). Step 10. Disconnect the IR cables (ribbon type cables). Refer to Figure 2 .
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 3 Step 15. Locate the TV IR cable and cut about five (5) inches from the end ( see Figure 6 ). Step 16. Twist the connector end of the new IR cable to the ends of the old IR cable and wrap securely with duct tape.
4 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 11 Step 20. Bundle the new cables and the A/V cables together and wrap with masking tape, or rout them through the flexible conduit if provided. See Figures 11 and 12 . Step 21. Tack the wire harness into the side frame and replace the wire harness shield, if provided ( see Figure 13 ).
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 5 Step 22. Place the Control Board against the back wall and attach using the top four (4) outermost holes with the screws and nuts provided. Refer to Figures 14 and 15 . Step 23. Plug all connectors into the new Control Board.
6 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 17 Strap The DVD Player Figure 16 Attach A/V Cables And IR Transmitter Unit DVD INST ALLA TION INSTRUCTIONS Refer to the DVD Replacement Kit Installation Instructions manual (No. 750,250M) for additional aid on the following steps: Step 1.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 7 NOTE: THIS PAGE INTENTIONALLY LEFT BLANK..
8 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Printed in U.S.A. © 2007 by LHP P/N 750,251M REV. A 01/2008 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
An important point after buying a device Lennox Hearth H6977 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lennox Hearth H6977 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lennox Hearth H6977 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lennox Hearth H6977 you will learn all the available features of the product, as well as information on its operation. The information that you get Lennox Hearth H6977 will certainly help you make a decision on the purchase.
If you already are a holder of Lennox Hearth H6977, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lennox Hearth H6977.
However, one of the most important roles played by the user manual is to help in solving problems with Lennox Hearth H6977. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lennox Hearth H6977 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
