Instruction/ maintenance manual of the product MSC366 Lenmar
Go to page of 3
Mach 1 ® Speed Charger TM For 3.6 & 6.0 Volt NiCd / NiMH Batteries Universal Charger for NiCd / NiMH Camcorder Batteries PLEASE READ THE INFORMATION AND FOLLOW ALL IN STRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. Introduction The Mach 1 Speed Charger is a highly advan ced and fully automatic battery charger whic h is compatible with 3.
Diag.-1 Once a battery has been properly connected to the appropriate adapter plate, the charge r will determine the status of the batte ry and begin the proper phase of the charging cycle. There are 3 phases to the charge cycle. The battery may be removed during any of the charging phases without harm to the battery or charger unit.
• If the battery is attach ed, and the status i ndicator is show ing “Stand By” (in dicated by the MED light flashing and all othe r lights off), the battery may not be making proper contact to th e adapter plate. Unplu g th e unit and check that the battery is attached correctly .
An important point after buying a device Lenmar MSC366 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenmar MSC366 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenmar MSC366 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenmar MSC366 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenmar MSC366 will certainly help you make a decision on the purchase.
If you already are a holder of Lenmar MSC366, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenmar MSC366.
However, one of the most important roles played by the user manual is to help in solving problems with Lenmar MSC366. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenmar MSC366 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
