Instruction/ maintenance manual of the product CRW-2 Lenco
Go to page of 7
CLOCK RADIO WITH W AKE UP LIGHT CRW001 (Lenco) IB // 80gms paper // folded size: 105(W)x146(H)mm // (Use 2 page 210(W)x146(H)mm total 8 pages) CRW002_lencoIB 2008/09/2 VER 03 For information and support www.
Table of content Important Safety Instrucions........................................................................................ Features.............................................................................................................
Installation Clock setting battery back-up A backup battery compartment located at bottom of the unit. (1) Open the battery compartment lid. (2) For clock setting backup, follow the polarity diagram shown inside the compartment and install 2 x AAA (UM-4) batteries (purchase separately).
Description of Parts Top View Bottom View Description of Parts 6 7 Eng Eng Front View 3 2 1 4 Left Side View 6 7 Right Side View 8 9 10 RESET 11 14 15 16 12 13 19 20 17 18 5.
8 9 Radio Operation Fully extend the FM Antenna wire for the maximum reception. 1. Press the POWER button to turn on the Radio. 2. Press the BAND button to select FM or AM(MW) band. 3. Rotate the TUNING wheel and tune to a desired station. 4. Adjust the sound level by rotating the VOLUME wheel.
10 The Sleep timer allows you to set the unit that automatically turn off the Radio after a selected sleep time. - T o activate the sleep timer and select the sleep time, press the SLEEP button repeatedly. The sleep time available for choosing are:15, 30, 45, 60, 75 and 90 minutes.
12 THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SET ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. Power Supply Power Adaptor Input AC 230V ~ 50Hz(For EU) Output DC 6V/350mA Battery Back-up for Clock: DC1.
An important point after buying a device Lenco CRW-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenco CRW-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenco CRW-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenco CRW-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenco CRW-2 will certainly help you make a decision on the purchase.
If you already are a holder of Lenco CRW-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenco CRW-2.
However, one of the most important roles played by the user manual is to help in solving problems with Lenco CRW-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenco CRW-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
