Instruction/ maintenance manual of the product 806648 Leica
Go to page of 44
Leica DISTO TM X310 The original laser distance meter Leica DISTO TM D810 touch The original laser distance meter Leica DISTO TM D810 touch The original laser distance meter.
Leica DISTO TM D810 touch 799093a 1 EN Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introduction - - - - - - - - - - - - - - - - - - - - - - - - .
Leica DISTO TM D810 touch 799093a 2 EN Instrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
Leica DISTO TM D810 touch 799093a 3 EN Instrument Set-up Basic measuring screen Status bar Favorites Main line Active function Tap here to start ON/DIST in a di s- tance function Selection screen FUNC.
Leica DISTO TM D810 touch 799093a 4 EN Instrument Set-up Pointfinder (Viewscreen) 1x 24.210 m Zoom stage Favorites Illumination adjustment with navigation keys left and right Active function Zoom with.
Leica DISTO TM D810 touch 799093a 5 EN Instrument Set-up Charging the Li-Ion batter y via USB Charge the battery before using it for the first time. Use the provided cable to charge the battery. Plug the small end of the cable into the port of the device, and plug the end of the charger into an electrical socket.
Leica DISTO TM D810 touch 799093a 6 EN Operations Using the Touch Screen i Use only fingers to use the touch screen. Do not allow the touch screen to come into contact with other elec- trical devices . Electrostatic discharges can cause the touch screen to malfunction.
Leica DISTO TM D810 touch 799093a 7 EN Operations Switching ON/OFF Clear Message Codes ON OFF 2 sec Device is turned OFF. i If no key is pressed for 180 sec, the device switches off au- tomatically. 1x Undo last action. 2x Leave actual func- tion, go to de fault operation mode.
Leica DISTO TM D810 touch 799093a 8 EN Operations Add / Subtract 7.332 m 1 The next meas- urement is added to the previous one. 2 The next meas- urement is sub- tracted from the previous one. 2x 7.332 m 12.847 m 3 20.179 m 4 i This process can be repeated as required.
Leica DISTO TM D810 touch 799093a 9 EN Operations Screenshot 1x 0.00 m 1 2 sec Screenshot photo is saved in gallery..
Leica DISTO TM D810 touch 799093a 10 EN Settings Overview 1 2 Tilt units Distance units Beep Digital level Keypad lock Tilt calibra tion Favorites Illumination Offset Reset Information Bluethooth ® Smart Date and Time Compass adjustment Touch screen Country Information Tilt uni ts 1 2 360.
Leica DISTO TM D810 touch 799093a 11 EN Settings Distance units 1 2 0.00 m 0.000 m 0.0000 m 0.0 mm 0.00 ft 0.00 in 0 in 1/32 0'00" 1/32 0.00 m 0.000 m 0.0000 m 0.0 mm 0.00 ft 0 ' 00 " 1/32 0 ' 00 " 1/16 0 ' 00 " 1/8 0 ' 00 " 1/4 0.
Leica DISTO TM D810 touch 799093a 12 EN Settings Beep ON/OFF 1 ON 2 To switch ON, repeat procedure. OFF Exit sett ings. 3 Digital level ON/OF F 1 ON 2 To switch ON, repeat procedure. OFF Exit sett ings. 3 i The digital leve l is displayed i n the status bar.
Leica DISTO TM D810 touch 799093a 13 EN Settings Bluetooth ® Settings 1 ON OFF O F F 2 OFF Explanatio n see info box below. Special Settings for data transfer. Exit sett ings. 3 i Default mode: Bluetooth ® is switched on and black Bluetooth ® icon is display ed in status bar.
Leica DISTO TM D810 touch 799093a 14 EN Settings Calibration of tilt se nsor (Tilt Calibration) 1 2 3 Place device on absolutely flat s urface. 180° 4 180° 5 Turn the device ho rizontally by 180° and place it again on absolutely flat surface. 6 7 Place device on absolutely flat s urface.
Leica DISTO TM D810 touch 799093a 15 EN Settings Personalized favorites 1 Favorite 2 3 Select favorite function. 4 Press selection key left or r ight. Function is set as favorite above the corresponding se- lection key. i Select your favori te functions for quick access.
Leica DISTO TM D810 touch 799093a 16 EN Settings Date and Time 1 2 00 : 00 3 Set time (hh:mm) 2013-04-08 4 Set date (yyyy-mm-dd) Exit sett ings. 5 Compass Adjustment i Depending on your geographic locati on, the angle of declination may v ary from other locations, as the geographic and magn etic poles ar e aligned.
Leica DISTO TM D810 touch 799093a 17 EN Settings Offset 1 2 1.012 m 3 Select digit. 1.012 m 4 Adjust digit. 5 Approve value. Exit sett ings. 6 i An offset adds or subtracts a specified value automatically to or from all measurements. This func- tion allows tolerances t o be taken into account.
Leica DISTO TM D810 touch 799093a 18 EN Functions Overview Timer Calculator Adjusting measuring refer ence Memory Sinlge Distance Measurement Level Volume Smart Horizontal Mode Photo Compass Gallery A.
Leica DISTO TM D810 touch 799093a 19 EN Functions Calculator 1 2 C/CE = 3 Select key on display. Confirm every key. Use selection keys for clear or result. i The measurement result from the main line is take n over to the calcula- tor and can be used fo r further calcu- lations.
Leica DISTO TM D810 touch 799093a 20 EN Functions Memory 1 2 8.449 m 8 .4 4 9 m 3 Switch betwe en measurements. Take over value for further acti ons. Delete memory. 4 Use Up/Down navigation keys to show more detailed results of the speci- fic measurement.
Leica DISTO TM D810 touch 799093a 21 EN Functions Level 1 2 0.3° 90° 0° 3 i Displays incl inations of 360 ° with a transverse inclination of +/- 10°. In- strument beeps at 0° and 90°. Ideal for horizontal or ve rtical adjustments. Area 1 2 3 Aim laser at first target point.
Leica DISTO TM D810 touch 799093a 22 EN Functions Volume 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec- ond target point. 6 7 Aim laser at third target point. 2.431 m 2.338 m 5.744 m 32.653 m 3 First dist ance Second distance Third distance Volume 8 16.
Leica DISTO TM D810 touch 799093a 23 EN Functions Photo 1 1x 2 OV * 2x 3 Take photo. 4 Exit. 5 i Tap on the camera icon in the mid- dle of the bottom line to take a pho- to.
Leica DISTO TM D810 touch 799093a 24 EN Functions Compass 1 2 Calibrate Compass? Refuse Confirm 0.0°N The arrow always points to true north. 3 Check that mul- tifunction al end- piece is not folded out.
Leica DISTO TM D810 touch 799093a 25 EN Functions Gallery 1 1x 2 1x 2013 - 07 - 03_13:25 201 1x 2013 - 07 - 03_13:25 :25 1x 13 - 0 7 - 03_13:25 - 03_ 13: 03 - 07 _13 : 25 _13:25 7 1x 2013 - 07 - 03_13:25 3 Exit. 4 i If the device is connected to the computer via USB cable, you can download or delete the gall ery.
Leica DISTO TM D810 touch 799093a 26 EN Functions Triangular area 1 2 3 Aim laser at first target point. 4 5 Aim laser at sec- ond target point. 6 7 Aim laser at third target point. 4.855 m 2 2.425 m 4.129 m 4.248 m Triangular area 8 First dist ance Second distance Third distance 33.
Leica DISTO TM D810 touch 799093a 27 EN Functions Height-profile measurement 1 2 REF 0 Aim at reference point (REF) . 3 4 REF 1 0 2 3 4 5 h d Aim at additional points 1-x. 5 d h 2.042 m 0.054 m Horizontal distance to device Height difference to reference point (REF).
Leica DISTO TM D810 touch 799093a 28 EN Functions Sloped objects 1 2 3 Aim laser at upper target point. 4 5 Aim laser at lower target point. 11.00 ° -3.440 m 30.367 m 5.452 m P2 distance Vertical height be- tween both poin ts P2 angle Distance between both points 6 -4.
Leica DISTO TM D810 touch 799093a 29 EN Functions Height tracking 1 2 P0 Px Aim laser at lower point. 3 4 P0 Px Aim laser at upper points and angle/ height tracking st arts automatically. 5 x y P0 y 29.89 ° 6.271 m -10.55 ° 3.475 m P0 Px z 6 = Tracking height if device is turned on trip od = Tracking angle if device is turned on trip od 44.
Leica DISTO TM D810 touch 799093a 30 EN Functions Trapezium 1 2 3 Aim laser at upper point. 4 5 Aim laser at 2nd point. x x y h y h 70.80 ° 5.790 m 13.
Leica DISTO TM D810 touch 799093a 31 EN Functions Stake out i Two different distances (a and b) can be entered to mark off de- fined measured lengths. 1 2 3 a b b a = b 1 2 3 a b b a = b 1 2 1.012 m 3 Select digit. 1.012 m 4 Adjust digit. 5 Approve value "a".
Leica DISTO TM D810 touch 799093a 32 EN Functions Pythagoras (2-point) 1 2 3 Aim laser at firs t target. 4 5 Aim laser at second target. 13.207 m 21.383 m 25.133 m 6 i The result is shown in the main line. Pressing the measuring key fo r 2 sec in the function ac- tivates automatically Minimum or Ma ximum measure- ment.
Leica DISTO TM D810 touch 799093a 33 EN Functions Pythagoras (3-point) 1 2 3 Aim laser at first target. 4 5 Aim laser at sec- ond target. 6 7 Aim laser at third target.
Leica DISTO TM D810 touch 799093a 34 EN Functions Width 1 -.--- m 1x 2 16.42m 3 It is absolutely necessary to aim with the laser per- pendicular to the object. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming. * OV = Overview 1x 16.42 m 5 Select arrows with the cursor keys or by tapping on the display and adjust with softkeys.
Leica DISTO TM D810 touch 799093a 35 EN Functions Diameter 1 -.--- m 1x 2 Ø 3 Aim laser perpendicula r to the middle of the round object. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming. * OV = Overview 0.237 m 1x 5 Select arrows with the cursor keys or by tapping on the display and adjust with softkeys.
Leica DISTO TM D810 touch 799093a 36 EN Functions Area from Photo 1 -.--- m 2 1x 2 3 Aim perpendicular to the horizontal center line of the ar- e a . T h i s a r e a m u s t b e perfectly flat on the vertical plane. OV * 1x 2x 4x 4 If necessary, use the Zoom for precise aiming.
Leica DISTO TM D810 touch 799093a 37 EN Technical Data * applies for 100 % target refl ectivity (white painted wall), low background illumination, 25 ºC ** applies for 10 to 100 % target reflectivity, hi gh background illumination, - 10 ºC to + 50 ºC *** Tolerances apply from 0.
Leica DISTO TM D810 touch 799093a 38 EN Message Codes If the message Error does not disappear after switching on the device r epeatedly, contact the dealer. If the message InFo appears with a number, press the Clear button and observe the following instructions: Care • Clean the device with a damp, soft cloth.
Leica DISTO TM D810 touch 799093a 39 EN Safety Instructions The person responsible for the inst rument must ensure that all users understand these directions and adhere to them. Areas of responsibility Responsibilities of the manufacturer of the original equipment: Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Internet: www.
Leica DISTO TM D810 touch 799093a 40 EN Safety Instructions Disposal CAUTION Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations.
Leica DISTO TM D810 touch 799093a 41 EN Safety Instructions Déclaration FCC, applicable aux Etats-Unis Ce produit a été testé et ses limites ont été jugées conformes à celles prescrites pour les dispositifs numériques de classe B, décrites dans le paragraphe 15 des règles FCC.
Leica DISTO TM D810 touch 799093a 42 EN Safety Instructions Use of the product with Blue- tooth ® WARNING Electromagnetic radiation can cause distur- bances in other equipment, in installations (e.g. medical ones such as pacemakers or hearing aids) and in aircraft.
Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) www.disto.com Leica Geosystems AG, He erbrugg, Swit zerland ha s been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Syst em s (ISO standard 9001) and Environ- mental Management Systems (ISO standard 14001).
An important point after buying a device Leica 806648 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Leica 806648 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Leica 806648 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Leica 806648 you will learn all the available features of the product, as well as information on its operation. The information that you get Leica 806648 will certainly help you make a decision on the purchase.
If you already are a holder of Leica 806648, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Leica 806648.
However, one of the most important roles played by the user manual is to help in solving problems with Leica 806648. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Leica 806648 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
