Instruction/ maintenance manual of the product Car CD Player Legacy Car Audio
Go to page of 13
OWNER’S MANUAL MANUALL Y TUNED SYNTHESIZER STEREO RADIO WITH COMP ACT DISC PLA YER DIGITAL.
2 CONTENTS Installation ..................................................................................................... 3 DIN Front-Mount (Method A) .................................................................................. 3 Installing the unit .
3 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Befor e finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work pr operly .
1 3 4 5 2 2 5 4 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5 x 25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain washer Removing the unit 1.
Front Panel Release Button 5 HOW TO REMOVE AND INST ALL THE FRONT P ANEL (OPTIONAL) 1. Press the r elease button and pull-off the fr ont panel. Keep front panel into the case.
6 WIRING CONNECTION FOR 2 X 7W SYSTEM WIRING CONNECTION FOR 4 X 7W OR 2 X 25W SYSTEM Note: 1. For 2-speakers system, green, violet, white/black and gr ey/black wire leads ar e unconnected and isolated. 2. For 2-speakers system, keep the fader control at center position to maintain the existing volume level.
7 OPERATION GENERAL OPERA TION • ON/OFF Press PWR button (1) to turn on the unit. Press it again to turn it off. • F ACEPLA TE RELEASE Press REL button (2) to detach the r emovable faceplate. • LOUDNESS Press LOU/RND button (8) shortly to r einforce the bass output.
8 • SET THE CLOCK Press DSP button (9) to change the display to clock display . Press it again to return to previous display . In clock display , press and hold the DSP button (9) for several seconds until the clock display flashes. Press VOL (5) to change minutes or VOL (4) to change hours.
9 • FLASHING LED If the front panel is not on the main unit, LED (21) will be flashing. • RESET BUTTON FUNCTION RESET button (22) is placed on the housing and must be activated with either a ballpoint pen or thin metal object.
RADIO OPERA TION • BAND Press BND button (10) to change bands as below: • SELECT ST A TION Rotate TUNING knob (11) clockwise or anticlockwise to adjust the frequency upward or downwar d.
CD OPERA TION • DISC PLA Y Gently insert a compact disc with the label side facing up into the disc slot (16). The disc is then automatically loaded into the unit and starts playing with the first track of the disc. The digital display will indicate the track number and the time of the track.
SPECIFICATION GENERAL P ow er Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 163 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : +10 dB / – 10 dB - Treble (at .
88-C1133-00 13 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on.
An important point after buying a device Legacy Car Audio Car CD Player (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Legacy Car Audio Car CD Player yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Legacy Car Audio Car CD Player - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Legacy Car Audio Car CD Player you will learn all the available features of the product, as well as information on its operation. The information that you get Legacy Car Audio Car CD Player will certainly help you make a decision on the purchase.
If you already are a holder of Legacy Car Audio Car CD Player, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Legacy Car Audio Car CD Player.
However, one of the most important roles played by the user manual is to help in solving problems with Legacy Car Audio Car CD Player. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Legacy Car Audio Car CD Player along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center