Instruction/ maintenance manual of the product PB-24 Lang Manufacturing
Go to page of 28
Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203 Phone: 1-800-224-5264 Fax: 1-425-349-2733 www.langworld.com ©Copyright 2000 Service Manual for the Lang Models: LG-24S, LG-36S,.
1 T ABLE OF CONTENTS CHAPTER PAGE 1. TABLE OF CONTEN TS .......................................................................1 2. READ FIRST ........................................................................................2 3. EQUIPMENT DESCRIPT ION .
2 IMPORTANT READ FIRST IMPORTANT CAUTION: EACH UNIT IS EXTREMLY HEAVY. FOR SAFE HANDLING, INSTALLER SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY A PPROPRIATE MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO THE PLACE OF INSTALLATION.
3 IMPORTANT READ FIRST IMPORTANT WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR HOSE CONTROL CONSOLE, ELECTRICAL CONNECTIONS, ETC. CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING.
4 EQUIPMENT DESCRIPTION ELECTRIC GRIDDLE EXTERIOR ♦ Griddle The griddle dim ensions are 17” (43.18cm) High, 30” (76.20cm ) Deep, and width is dependent on the actual model number. The Sides, Bottom, and R ear wall are constructed of double wall stainless steel, whic h allows closer installation to combustible surfaces.
5 INSTALLATION RECEIVING THE GRIDDLE Upon receipt, check for freight damage, both visible and c oncealed. Visible damage s hould be noted on the freight bill at the time of delivery and signed by the carrier's agent. C oncealed loss or damage means loss or dam age, which does not become apparent until the m erchandise has been unpacked.
6 INSTALLATION CONT’D PHASING LG / LGS All griddles are shipped from the factory set up for a three- phase service. Rearrange the wires in the power supply terminal block to convert the griddle to si ngle phase. Rephasing the griddle i s not chargeable to Lang Manufacturing Company as warranty .
7 ST ART -UPS ELECTRIC GRIDDLES Electric Griddle Start-Up 1) Verify connections at plug and terminal block 2) Incoming Volt - Single Phase L1-L2______ Three Phase L1-L2______ L2-L3______ L3-L1______ 3) Amp draw L1______ L2______ L3______ 6) Verify actual temperature at 350 ° F ________ ° F.
8 GENERAL GENERAL The suggested tim e and temperature chart (bel ow) is provided as a guide for the products listed only. CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE FREE FROM COMBUSTIBLE MATERIALS. CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND DRY.
9 GENERAL CONT’D OPERATIONS An understanding of how the gri ddle sections are controlled will be a valuable aid in loading your griddle. Each 12 inch section of your griddle i s independently control led by a tem perature controller. The temperature control sensor is mounted in the center of each cooking section under the griddle plat e.
10 SEQUENCE OF OPERA TION LG Griddle 208/ 240 VAC to Thermost at. Thermostat turned on. 208/ 240 VAC to Elem ents. LGS Griddle Power sw itch turned to on: 208/240 VAC to poles of each sections contactor. 240/24 Transformer energized. Individual section switch turned to on.
11 TROUBLESHOOTING LG Griddle: PROBLEM SOLUTION Whole griddle will not heat Confirm that Circuit breakers are on. Confirm that griddle i s connected properly. One Section will not heat Confirm that elem ents have power. Confirm that therm ostat is operating properl y.
12 TROUBLESHOOTING CONT’D Pane Bella PROBLEM SOLUTION Grill will not heat Confirm that incoming power is correct. Check thermostat for norm al operation. Check elements for proper operation. Confirm that there are no breaks in the wires.
13 TECHNICAL DATA ELEMENT RESISTANCE 208 / 240 Volt I/S 11030-29 LG Griddle 9 Ω / 9.6 Ω 23 / 25 Am ps 208 Volt O/S 11030-30 LG Griddle 29 Ω 8 Amps 480 Volt 11030-31 LG Griddle 38 Ω 12.5 Amps 120 Volt Bottom 11030-51 PB Griddle 13.
14 TECHNICAL DA T A CONT’D PROBE RESISTANCE TEMP RESISTANCE VOLT DROP TEMP RESISTANCE VOLT DROP 70 ° 556 Ω 1.11 290 ° 881 Ω 1.76 80 ° 569 Ω 1.14 300 ° 897 Ω 1.79 90 ° 583 Ω 1.17 310 ° 914 Ω 1.83 100 ° 596 Ω 1.19 320 ° 931 Ω 1.
15 WIRING DIAGRAM LG 208/240.
16 WIRING DIAGRAM LG 480.
17 WIRING DIAGRAM LG-S 208/240.
18 WIRING DIAGRAM LGS 480.
19 PB-24 208/240 WIRING DIAGRAM.
20 PB-12 120 WIRING DIAGRAM.
21 PB-12, 208/240 WIRING DIAGRAM.
22 XL HOOD.
23 LG-24, LG-36, LG-48, LG-60, LG-72 ELECTRIC GRIDDLE DESCRIPTION PART NO. Element Griddle 380 Volt 5991 Watts 11030-04 Element Griddle 208/240 Volt I/S 4500/5991 Watts 11030-29 Element Griddle 208 Vo.
24 LG-24S, LG-36S, LG-48S, LG-60S, LG-72S ELECTRIC SELECTRONIC GRIDDLE DESCRIPTION PART NO. Element Griddle 208/240 Volt I/S 4500/5991 Watts 11030-29 Element Griddle 208 Volt O/S 1491 Watts 11030-30 E.
25 PB-24 ELECTRIC PANE BELLA GRIDDLE DESCRIPTION PART NO. Element Lower 208/240 Volt 900 Watts 11030-40 Element Upper 208/240 Volt 720 Watts 11030-41 Stud Grill Plate 10-24 x 1” 20101-13 Stud Grill .
26 PB-12 ELECTRIC PANE BELLA GRIDDLE DESCRIPTION PART NO. Element Lower 115 Volt 900 Watts 11030-51 Element Upper 115 Volt 720 Watts 11030-52 Stud Grill Plate 10-24 x 1” 20101-13 Stud Grill Plate 10-24 x 1 1/4” 20101-14 Screw, Crumb Tray Knob 20101-24 Thermostat 650 ° F Griddle 30402-36 Terminal Strip 30500-03 Timer Mechanical 15 Min.
27 XL-24, XL-36, XL-48, XL-60, XL-72 ELECTRIC QUARTZ COMBO GRIDDLE DESCRIPTION PART NO. Element Griddle 208/240 Volt I/S 4500/5991 Watts 11030-29 Element Griddle 208 Volt O/S 1491 Watts 11030-30 Eleme.
An important point after buying a device Lang Manufacturing PB-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lang Manufacturing PB-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lang Manufacturing PB-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lang Manufacturing PB-24 you will learn all the available features of the product, as well as information on its operation. The information that you get Lang Manufacturing PB-24 will certainly help you make a decision on the purchase.
If you already are a holder of Lang Manufacturing PB-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lang Manufacturing PB-24.
However, one of the most important roles played by the user manual is to help in solving problems with Lang Manufacturing PB-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lang Manufacturing PB-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
