Instruction/ maintenance manual of the product AGC Lang Manufacturing
Go to page of 19
Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203 Part Number: 60801- Phone: 425-349-2400 Fax: 425-349-2733 © Copyright 1998 WWW.
2 THIS MANUAL MUST BE RETAINED FOR FUTU RE REFERENCE. READ, UNDERSTAND AND FOLLOW THE IN STRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
3 TABLE OF CONTENTS CHAPTER PAGE 1. READ FIRST ................................................................................................................. 4 2. EQUIPMENT DE SCRIPTION...............................................................
4 IMPORTANT READ FIRST IMPORTANT NOTICE: If the Clamshell® is to be attached to a griddle/ charbroiler in the field – it is recommended to complete the installation of moun ting adapter before un-crating the Clamshell®. CAUTION: UNIT IS EXTREMELY HEAVY.
5 IMPORTANT READ FIRST IMPORTANT WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR HOSE CONTROL CONSOLE, ELECTRIC AL CONNECTIONS, ETC. CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING.
6 2. EQUIPMENT DESCRIPTION Lang Model: AGC ADD-ON CLAMSHELL® HOOD 2.1 Exterior Construction • The Clamshell® dimensions are 19 1/2” (49.53cm) High in the lowered position, 38 1/3” (97.36cm) High in the raised position, 36 3/4” (93.35 cm) Deep, and width is 24” (60.
7 3. UNPACKING 3.1 Receiving the Clamshell® Upon receipt, check for fre ight damage, both visi ble and conceal ed. Visible damage shoul d be noted on the freight bill at the tim e of delivery and si gned by the carrier's agent.
8 4. INSTALLATION WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY AND PLUMBING. IMPROPER INSTALLATION CAN CAUSE INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT. UNIT MUST BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES.
9 4. INSTALLATION CONT’D Figure 1 Griddle / Charbroiler ACV ACV Manual Shut-off Valve Regulator Legend: ACV = Automatic Cut-off Valve A = 1” Pipe B = Reduction to 3/4” Pipe C = Reduction to 1/2.
10 5. INITIAL START UP 5.1 Initial Lighting Procedure for an Clamshell® WARNING: DURING INITIAL USE, OR USE A FTER SERVICE, IF THE PILOT DOES NOT IGNITE ON FIRST TRY THE MA IN GAS VALVE MUST BE TURNED OFF FOR AT LEAST FIVE MINUTES. NOTICE: While cooking, the Clamshell® must be monitored at all times.
11 6. OPERATION 6.1 Clamshell® Operation CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE FREE FROM COMBUSTIBLE MATERIALS. CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY, TO AVOI D THE DANGER OF SLIPS OR FALLS.
12 7. SEQUENCE OF OPERATION 7.1 Power On • When the Clamshell® is plugged in, 220 Volts is app lied to the blower motor. The Clamshell® is designed to have a c onstantly running blower m otor. • The air switch then senses the b lower motor, closes, and app lies the 220 Volts to a 24 VAC transformer.
13 8. MAINTENANCE & CLEANING WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR HOSE CONTROL CONSOLE, ELEC TRICAL CONNECTIONS, ETC. CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING.
14 9 . TROUBLESHOOTING 9.1 Symptoms What follows is a chart of Symptoms and Possible Causes to aid in diagnosing faults with the Clamshell®. Refer to the Symptoms column to locate the type of failure then to the Possible Cause for the items to be checked.
15 9. TROUBLESHOOTING CONT’D 9.2 TESTS NOTICE: Service on this, or any other, LANG appliance must be performed by qualified personnel only. Consult y our authorized service station directory or call the factory at 1-800-22 4-LANG (5264), or WWW.LANGW ORLD.
16 10. PARTS LIST Item No. Part# Descri p tion 1 103-73 HANDLE 2 103-19 HOOD WRAP 3 103-193 HOOD SKIRT, LEFT SIDE 3 103-194 HOOD SKIRT, RIGHT SIDE 3 103-197 HOOD SKIRT, FRONT W/ HINGE 4 50201-08 WIRE GUARD ADD ON BROILER 5 80302-06 IGNITION / SENSOR , FR 310.
17 10. PARTS LIST CONT’D Item No. Part# Descri p tion 16 103-61 TUBE #2 17 80501-10 REGULATOR GAS SET 3 1/2" NG BROILER 18 80300-10 MODULE SPARK IGNITOR BROILER * 30307-02 CLIP MOUNT MERCURY T .
18 11. WIRING DIAGRAM.
19 12. WARRANTY Lang Manufacturing Limited Warranty to Commercial Purchasers* (Domestic U.S., Hawaii, & Canadian Sales only. ) Lang Manufactu ring Equipm ent (“Lang Equipm ent”) has been skillfully manufactured, carefully in spected and packaged to meet rigid standards of excellence.
An important point after buying a device Lang Manufacturing AGC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lang Manufacturing AGC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lang Manufacturing AGC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lang Manufacturing AGC you will learn all the available features of the product, as well as information on its operation. The information that you get Lang Manufacturing AGC will certainly help you make a decision on the purchase.
If you already are a holder of Lang Manufacturing AGC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lang Manufacturing AGC.
However, one of the most important roles played by the user manual is to help in solving problems with Lang Manufacturing AGC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lang Manufacturing AGC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
