Instruction/ maintenance manual of the product Snow Plow Land Pride
Go to page of 10
1 © Copyright 2007 Pr inted Bef ore Y ou Star t Your Snow Plow is exclusively designed for your Land Pride NT & ST Treker. Please read these installation instructions and your NT & ST Treker Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns.
2 Manual No . 701-157M 06/26/07 Land Pride Assembl y Instructions ■ Position Lever ahead and turn the blade to the desired position. The Lever will spring back when the blade is at the correct angle. The blade skids are adjustable so the blade can be lowered but still held a certain distance off the ground.
3 06/26/07 Manual No . 701-157M Assembl y Instructions Land Pride ■ Hinge (#2) to the Blade with the 1/2" x 1 " Bolts and Locknuts (#15). Tighten Nuts to 60 Ft Pounds of Torque. See diagram below. Remove the two Blade Spring Attaching Brackets (#8) from the LEFT side of the Blade Hinge.
4 Manual No . 701-157M 06/26/07 Land Pride Assembl y Instructions ■ Block Straps (#2), secure with the supplied 1/2"x 1 1/2 bolt (#3) and the 1/2"center lock nut (#4). Do not over tighten. The Cable Pulley (#1) should be able to move freely.
5 06/26/07 Manual No . 701-157M Assembl y Instructions Land Pride ■ 823-227C NT MOUNT KIT-SNOW PLOW W/INST PLOW MOUNT 1. Attach (#1) Blade Mount to bottom of frame tubes (Shown above) using the (#5) 5/16’" x 2" x 3" U-Bolts for the rear and the (#4) 3/8" x 1 1/2"x 2 1/2U-Bolts for the front.
Land Pride Listing of P ar ts Manual No . 701-157M 06/26/07 6 ■ 1 823-224C 60" STEEL SNO W PLO W 1 2 802-282C RHSNB 5/16-18X1 GR5 9 2 803-084C NUT HEX NYLOCK 5/16-18 PL T 9 3 PUR0400 5/8" .
7 06/26/07 Manual No . 701-157M Assembl y Instructions Land Pride ■ 823-226C PUSH ARMS FOR SNO W PLO W 1 CYC3154 Y2K PUSH TUBE 1 2 CYC2389 BLADE HINGE 1 3 CYC0345 BLADE POSITION LEVER BRA CKET 1 4 C.
8 Manual No . 701-157M 06/26/07 Land Pride Assembl y Instructions ■ 1 CYC4610 BLADE MOUNT 2 PUR1209 3/8" CLEVIS PIN 3 805-010C PIN HAIR CO TTER .
9 06/26/07 Manual No . 701-157M Assembl y Instructions Land Pride ■ 1 CYC4598 BLADE MOUNT 2 PUR1209 3/8" CLEVIS PIN 3 805-010c RPBY 805-010C 4 PUR1415 3/8" X 1-1/2" X 2-1/2" U-BOL T 5 PUR1435 5/16" X 2" X 3 U-BOL T 6 804-011C W ASHER FLA T 3/8 USS PL T 7 804-078C W ASHER INTERNAL ST AR 3/8 PL T .
Cor por ate Office: P .O . Bo x 5060 Salina, Kansas 67402-5060 USA www .landpr ide .com.
An important point after buying a device Land Pride Snow Plow (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride Snow Plow yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride Snow Plow - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride Snow Plow you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride Snow Plow will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride Snow Plow, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride Snow Plow.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride Snow Plow. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride Snow Plow along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center