Instruction/ maintenance manual of the product WT-2150A La Crosse Technology
Go to page of 8
Radio Controlled Alarm Clock Introduction: Congratulations on purchasing this Radi o Controlled Alarm Clock. Welcome to the world of radio controlled time-keeping techn ology. We hope y ou will enjoy the convenience of never having to set your clock again an d having the confidence of knowing ex actly what time it is.
Snooze button Function Keys Battery Cover Starting up the Alarm Clock The alarm clock uses 1 x AA LR6 ba ttery (Alkaline recom mended) 1. Slide the battery cov er off as indicated by the triangle to open the battery compartment. 2. Insert 1 x AA ba ttery, observing polarity .
A LM2/Minute key SNOOZE Bar Your Radio Contr olled Alarm Clock has five easy to use function keys: Use of keys: SET: • Enter the programming mode. • Select and confirm settings w hile in programming mode.
Programming Mode 1) Press the SET key t o enter programming mode. 2) Time Zone: Press the MODE/+ key to change the time zone. a) Default upon starting is Eastern (-5 GM T) b) Can be set to –1 to –.
2) Press the ALM1/HOUR key to se t the alarm hour. 3) Press the ALM2/MIN key to set the alarm minute. 4) Exit this mode by pressing the SNOOZE bar or waiting for 15 seconds. Alarm is activated when ((1)) or ((2)) is displayed to the right of the map. To activate/deactivate an alarm , press the ALM1 or ALM2 ke y briefly.
absolutely correct time and date by the next morning. When a signal i s received, the radio tower icon is displayed to the left of the US map. If no signal is received, there will be no tower icon. Q: Why hasn’t my alarm clock picked up a signal? A: Short-term interference can be caused by storms between you and Colorado during reception time.
Battery Change • It is recommended to replace the ba ttery on an annual basis to en sure optimum accuracy or w hen the battery icon indicates low running power. • When replacing the battery, be sure to leave battery out for at least one minute to allow complete rese t.
For warranty work, technical support, or info rmation, contact La Crosse Technology at: La Crosse Technology, Ltd 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.
An important point after buying a device La Crosse Technology WT-2150A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WT-2150A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WT-2150A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WT-2150A you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WT-2150A will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WT-2150A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WT-2150A.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WT-2150A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WT-2150A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
