Instruction/ maintenance manual of the product WS-6118AL-IT La Crosse Technology
Go to page of 7
1 LCD2 display LCD1 display Battery cover Hanging holes Foldable stand WS-6118U-IT AT OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA TURE AND MOON PHA SE Instruction Manual FEATURES: ATOMIC CLOCK: • WW VB.
2 Indoor temperature We ek d ay • Wall mount or freestanding • Current moon phase display OUTDOOR TEMPERATURE TRA NSM ITTER: • Remote transmission of outdoor temperature to the atomic clock by 915 MHz signals • Wall mounting case TO INSTALL A ND REPLACE BATTERIES IN THE A TOMIC CLOCK The atomic clock uses 2 x AA, 1.
3 • Weekday setting • 12/24 hour time display setting • ºC or ºF setting TIME ZONE SETTING After entering the manual setting mode as described above, the time zone can be set between the +12 to –12 hour or Greenwich Me an Time (GMT) range in LCD2.
4 ALAR M S ET TI NG To enter into the alarm setting mode: 1. Hold the ALM key for 4 seconds. The hour digits start flashing. 2. Press and release the + key to set the hour. 3. Press and release the ALM key to set the minutes. The minute digits start flashing.
5 To achieve a true temperature reading, avoid mounting where direct sunlight can reach the outdoor temperature transmitter. It i s recommended to mount the outdoor temperature transmitter on a North-facing wall or in any well shaded area.
6 a receivable range from the transmitter. 3) Move the units to another location. Interferences from other electrical devices operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception. Problem: "OF.L“ appears in the outdoor temperature section of the LCD.
7 WARRA NTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and w or kmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product.
An important point after buying a device La Crosse Technology WS-6118AL-IT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology WS-6118AL-IT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology WS-6118AL-IT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology WS-6118AL-IT you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology WS-6118AL-IT will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology WS-6118AL-IT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology WS-6118AL-IT.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology WS-6118AL-IT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology WS-6118AL-IT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
