Instruction/ maintenance manual of the product TX7U La Crosse Technology
Go to page of 5
TX7U Outdoor Temperature/Humidity Sensor The TX7U outdoor temperature/humidity sensor can be added to your existing units in operation. The outdoor temper ature/humidity sensor measures the outdoor temperature and humidity (or any other location y ou wish to know the temperature and humidity) and transmits the data to the indoor display station.
Note: Outdoor temperature/humidity sensors will not usually read the same temperature. This is due to variants such as drafts and handling. This is normal. 3. Observe the correct polarity and install 2 AA alkaline batteries in each unit in sequential order.
5. Snap the outdoor temperature/humidity sensor into place on the mounting bracket. B. MOUNTING WITH A DHESIVE TA PE 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.
V. LIABILITY DISCLA IMER 1. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any c onsequences occurring should an inaccurate reading take place. 2. This product is not to be used for medical purposes or for public information.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNI TIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATIO N OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMAT ION.
An important point after buying a device La Crosse Technology TX7U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology TX7U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology TX7U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology TX7U you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology TX7U will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology TX7U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology TX7U.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology TX7U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology TX7U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
