Instruction/ maintenance manual of the product Radio Controlled Projection Alarm WT-5110 La Crosse Technology
Go to page of 13
WT-5110 433 MHz Radio Controlled Projection Alarm Instruction Man ual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Function.
3 INVENTORY OF CONTENTS 1) WT-5110 Alarm Clock 2) AC adapter/transformer 3) Instruction manual and warranty card. ADDITIONAL EQ UIPMENT (not included) 1) Two fresh 1.5V AA batteries (opt ional for projection alarm clock) FEATURES OF PROJECTION ALAR M Operation of these features is in section III 1.
4 QUICK SET-UP GUI DE Hint: Use good quality Alkaline Ba tteri es and avoid rechar ge able batte ries. 1. We recommend beginning the set- up procedure at night when the WWVB signal is e asiest to re ceive.
5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and instal l 2 AA batteries. 3. In addition or instead of ins erting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of the alarm clock and then plug in adapter.
6 II. PROGRAM MODE To enter the Program Mode hold down the “MODE/MIN” button for 3 seconds, until the time flashes in the top of the display. The Program Mode Guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the projection alarm.
7 4. Press and release the “MODE/MIN” button to select the appropriate time zone. There are 24 time zones to choose from (based relative to the internat ional time standard of GMT (“Greenwic h Mean Time). NOTE: The U.S. time zones will show abbr eviations as opposed to the numerical time zone indicator.
8 III. FEATURES & O PERATIONS A. FEATURES 1. Radio-controlled time 2. Projection of time 3. LED backlight 4. Display of indoor temperature/humidity or alarm time 5. T ime al arm B. RADIO-CON TROLLED TIME 1. The projection alarm will automatically search for the time signal upon initial set-up and every night.
9 D. LED BACKLIGHT 1. The projection alarm has an LED backlight designed for night-viewing. This will light up for 4 seconds whenever the snooze button is pressed. 2. The LED backlight cannot be turned on constantly; this wo uld drain the batteries. E.
10 H. CHANGING DIS PLAY MODE (INDO O R TEMPERATURE/ HUMIDITY OR ALA RM TIME) There are two possible display modes in the indoor temperature/humidity section of the LCD (lower left); indoor temperature and humidity or alarm t ime. To change the display press and relea se t he “MOD E/M IN” b utton to toggle between the two modes.
11 SPECIFICATIONS FOR WT-5110 Temper ature: Meas uring range: 14 ° F to 99 ° F wit h 0.2 ° F resolu tion Checking intervals: Every 10 seconds Humidity Meas uring range: 1 – 9 9% Checking intervals: Every 10 seconds Power source: AC Adapter (included) Input: 120VAC/60Hz Output: DC 3.
12 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and wo rkmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and u sed in Nor th America a nd onl y to the or iginal pu rchaser o f this product.
13 This warranty gives you specific legal rights. You may also have other rights specific to your St ate. S ome States do no all ow the exc lusion of cons eque ntial or incidenta l damages therefore the above exclusion of limi tation may not apply to you.
An important point after buying a device La Crosse Technology Radio Controlled Projection Alarm WT-5110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought La Crosse Technology Radio Controlled Projection Alarm WT-5110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data La Crosse Technology Radio Controlled Projection Alarm WT-5110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, La Crosse Technology Radio Controlled Projection Alarm WT-5110 you will learn all the available features of the product, as well as information on its operation. The information that you get La Crosse Technology Radio Controlled Projection Alarm WT-5110 will certainly help you make a decision on the purchase.
If you already are a holder of La Crosse Technology Radio Controlled Projection Alarm WT-5110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime La Crosse Technology Radio Controlled Projection Alarm WT-5110.
However, one of the most important roles played by the user manual is to help in solving problems with La Crosse Technology Radio Controlled Projection Alarm WT-5110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device La Crosse Technology Radio Controlled Projection Alarm WT-5110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
