Instruction/ maintenance manual of the product KC-120-1 Kyocera
Go to page of 7
INSTALLATION MANUAL FOR THE OF SOLAR PHOTOVOLTAIC POWER MODULES Please read this manual carefull y before installing the modules. KYOCERA CORPORATION 1.
corrosion. ・ The solar module frame must be attached to a support stru cture using ¼” or M6 stainless steel hardware in a minimum of four (4) places symmetric al on the solar module. The stainle ss steel hardware used for securing the module frame should secured with an applied torque of 6 foot-pounds (8 Newton -meters).
7. INSTALLING KC MODULES The frame of eac h module has 0.28 ” φ diameter (7 mm) mounting holes (Ref er to Module Mounti ng Specifications). These are used to secure the modules to the supporting structure. An example of a ground mou nted structure is shown in Figure 3.
C. The wire used to interconnect the solar modules may be single or two conductor, from 14 AWG (2.08 mm 2 ) up to 10 AWG (5.26 mm 2 ) gauge stranded copper wire, in a “SUNLIGHT RESISTANT” jacket UF cable. This cable is suitable for applications where wiring is exposed to the direct rays of the sun.
When a bypass diode is wired in parallel with the series stri ng, the forced current will flow through the diode and bypass the shaded module, thereby minimizing m odule heating and arra y current losses.
Table 2. Ky oc era KC-Family Module Specifications Electrical Characteristics: Model Number KC-120-1 KC-80 KC-70 KC-60 KC-50 KC-45 KC-40 KC-35 Rated Power, Watts (Pmax) 120 80 70 60 50 45 40 35 Open circuit Voltage (Voc) 21.5 21.5 21.5 21.5 21.5 19.2 21.
MODULE MOUNTING DIMENSIONS MODULE MOUNTING SPECIFICATIONS DO NOT USE DO NOT USE KYOCERA KC−SERIES.
An important point after buying a device Kyocera KC-120-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kyocera KC-120-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kyocera KC-120-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kyocera KC-120-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Kyocera KC-120-1 will certainly help you make a decision on the purchase.
If you already are a holder of Kyocera KC-120-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kyocera KC-120-1.
However, one of the most important roles played by the user manual is to help in solving problems with Kyocera KC-120-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kyocera KC-120-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
