Instruction/ maintenance manual of the product FS-1100 Kyocera
Go to page of 109
OPERATION GUIDE F S - 11 0 0 F S - 13 0 0 D 870CKGB20008 *870CKGB20008*.
This Operation Guide is for models FS-1 100 and FS-1300D. Included Guides The following guides are included with this machine. Refer to the proper guide based on your requirements. Operation Guide (This Guide) Describes how to load paper , print, replace toner , clean the printer , and troubleshooting.
i Contents 1 Machine Parts .............. ................ ................. ................ .............. 1-1 Components at the Front of th e Printer .... ................ .............. 1-2 Components at the Rear of the Printer ....... ...........
ii.
iii Le gal and Safety Inf or ma tion Please read this information before using your machine. Th is chapter provides info rmation on the following topics: Legal Informa tion iv License Agree ment s vi .
iv Le gal Infor ma tion Notice on Sof tware SOFTW ARE USED WITH THIS PRINTER MUST SUPPOR T THE PRINTER'S EMULA TION MODE. The prin ter is factory-set to emulate the PCL. The emulation mode can be changed. Notice The information in this guide is subject to change without notification.
v USB This product has been certified by the USB Implementers Forum, Inc..
vi License Ag r eements IBM Program License Agreement The following declarations have been provided in English intentionally . THE DEVICE YOU HA VE PURCHASED CONT AINS ONE OR MORE SOFTW ARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNA TIONAL BUSINESS MA CH INES CORPORA TION (“IBM”).
vii For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of: 1. the equivalent of U.S. $25,000 in your local currency; or 2.
viii agreement which can be obtained from Monotype Imag ing. Monotype Imaging retains all rights, title and interest to the Software and T ypefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
ix 14. YOU ACKNOWLEDGE THA T YOU HA VE READ THIS AGREEMENT , UNDERS T AND IT , AND AGREE TO BE BOUND BY ITS TERMS AND COND ITIONS. NEITHER P ARTY SHALL BE BOUND BY ANY ST A TEMENT OR REPRESENT A TI ON NOT CONT AINED IN THIS AGREEMENT .
x S a fe t y I n fo r m at i o n Laser Notice Radio Frequency T ransmitter This machine contains a transmitter module. W e, the manufacturer (Kyocera Mita Corporation) hereby declare that this equipme.
xi Caution Labels The printer bears any of the following labels. Ozone Concentration These printers generate ozone gas (O3), which may concentrate in the place of installation and cause an unpleasant smell. T o minimize the concentration of ozone gas to less than 0.
xii CE Marking Directive Hereby , Kyocera Mita Corporation, decla res that this page printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
xiii Energy Saving Function This printer comes equipped with a Sleep Mode where printer function remains in a waiting state but power consumption is still reduced to a minimum when there is no activity with the printer within a set amount of time.
xiv Symbols The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user , other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their meanings are indicated below .
xv Installa tion Pr ecautions Environment Caution Avoid placing the machine on or in locations which are unst able or not level. Such locations may cause the machine to fall down or fall over . This type of situation presents a danger of personal injury or damage to the machine.
xvi Power Supply/Grounding the Machine Wa r n i n g Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. Plug the power cord securely into the outlet.
xvii Pr ecautions f or Use Cautions when using the machine Wa r n i n g Do not place metallic objects or cont ainers with water (flower vases, flower pots, cup s, etc.) on or near the machine. This situation presents a danger of fire or electrical shock should they fall inside.
xviii If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to clean ing of internal p arts. This is particularly ef fective if accomplished prior to seasons of high humidity .
Introduction-xix About the Operation Guide This Operation Gui de contains the following chapters: 1 Machine Part s This chapter explains the names of part s. 2 Loading Paper This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray .
Introduction-xx Conventions in This Guide This manual uses the following conventions. Convention Description Example It alic T ypeface Used to emphasize a key word, phrase or reference to additional information. Load the paper in the cassette. Refer to Configuration T ool on page 3-9.
Machine Parts 1-1 1 Mac hine P ar ts This chapter identifies machine parts, indicator s, and operation panel keys. Component s at the Front of the Printer 1-2 Component s at the Rear of the Printer 1-.
1-2 Machine Part s Component s at the Front of the Printer 1 T op Cover 2 Paper S topper 3 T op T ray 4 Operation Panel 5 Right Cover 6 Paper Cassette 7 Front Cover 8 Manual Feed 9 MP T ray 10 Subtray.
Machine Parts 1-3 Component s at the Rear of the Printer 11 Optional Interface Slot Cover 12 USB Interface Connector 13 Rear Cover 14 Power Cord Connector 15 Power Switch 11 14 12 15 13.
1-4 Machine Part s Operation Panel 1 Ready Indicator 2 Attention Indicator 3 T oner Indicator 4D a t a Indicator 5 Paper Indicator 6 Jam Indicator 7 [Cancel] Key 8[ G O ] Key 2 1 3 4 5 6 7 8.
Machine Parts 1-5 Indicators There are six indicators located on the top right of the printer . The indicators are used to identify the status of the printer at any time. T o identify the printer status, check the indicators on the printer and then refer to the table below .
1-6 Machine Part s Keys Refer to the following table for the name and description of the basic functions of each key . Key St atus Operation Function Cancel - Press for 1 second or more Cancels the data from the PC GO At Ready Press momentarily Switches On-line/Off-line Press for 3 to 9 seconds Prints the status page.
Loading Paper 2-1 2 Loading P aper This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray . Paper Specifications 2-2 Prep aring the Paper 2-1 1 .
2-2 Loading Pap er General Guidelines The machine is designed to print on standard copier p aper , but it can also accept a variety of other types of paper within the limits specified below .
Loading Paper 2-3 Minimum and Maximum Paper Sizes The minimum and maximum paper sizes are as follows. For the p aper smaller than JIS B6, postcards, and envelopes, the MP tray must be used.
2-4 Loading Pap er Selecting the Right Paper This section describes the guidelines for selecting paper . Condition Avoid using p aper that is bent at the edges, curled, dirty , torn, embossed, or contaminated with lint, clay , or paper shreds.
Loading Paper 2-5 Basis weight Basis weight is the weight of paper expressed in grams per square meter (g/m²). Paper that is too heavy or too light may cause feed errors or paper jams as well as premature wear of the product.
2-6 Loading Pap er The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is high and the paper absorbs moisture, the paper edges exp and, becoming wavy in appearance. When the relative humidity is low and the paper loses moisture, the edges shrink and tighten, and print contrast may suffer .
Loading Paper 2-7 Special Paper The following types of special paper can be used: • Thin paper (60 to 64 g/m²) • Thick paper (90 to 220 g/m²) • Colored paper • Recycled paper • Overhead pr.
2-8 Loading Pap er Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the extra top sheet from the carrier sheet until after printing is finished. The table below list s the specifications for adhesive label paper .
Loading Paper 2-9 Thick Paper Fan the stack of pape r and align the edges before loading them in the MP tray . Some types of paper have rough edges on the back (those are created when the paper is cut). In this case, put the paper on a flat place and rub the edges once or twice with, for example, a ruler to smooth them.
2-10 Loading Pap er Paper T ype The printer is capable of printing under the optimum setting for the type of paper being used. A different p aper type setting can be made for each paper source including the MP tray . Not only can preset paper types be selected, but it is also possible for you to define and select customized paper types.
Loading Paper 2-1 1 Prep aring the Paper After removing p aper from the packaging, fan through the sheet s to separate them prior to loading. If using paper that has been fold ed or is curled, straighten it prior to loading. Failure to do so may result in a paper jam.
2-12 Loading Pap er 3 Adjust the position of the width guides located on the le ft and right sides of the cassette. Press the releas e butt on on the left guide and slide the guides to the paper size required. 4 Adjust the paper length guide to the paper size required.
Loading Paper 2-13 6 Insert the paper cassette into the slot in the printer . Push it straight in as far as it will go. There is a paper gauge on the lef t side of the front of the paper cassette to indicate the remaining paper supply . When paper is exhausted, the pointer will go down to the level of (empty).
2-14 Loading Pap er Loading Paper into MP (Multi-Purpose)T ray FS-1300D can load 50 sheets of 1 1 × 8 1/2" or A4 paper (80 g/m²) into the MP T ray . On the other hand, FS-1 100 can one sheet into the Manual Feed . 1 Pull the MP tray towards you until it stops.
Loading Paper 2-15 4 Align the paper with the p aper guides and insert as far as it will go. FS-1300D FS-1 100 Note Do not load more paper than exceeds the tab of the MP tray (for FS-1300D only).
2-16 Loading Pap er When loading envelope, place with the envelope flap closed and keep the printing side face-up. Insert envelope against the guide with the flap on the front or left side until they stop. 5 S pecify the p aper size and type for MP tray using Configuration T ool .
Connecting an d Prin tin g 3-1 3 Connecting and Printing This chapter explains how to start up the printer , print from your PC, and use the application software included in the CD-ROM.
3-2 Connecting and Printin g Connections This section explains how to start up the printer . Connecting the USB Cable Follow the steps as below for connecting the USB cable . 1 Connect the USB cable (not included) to the USB Interface Connector . 2 Connect the other end of the USB cable to the computer's USB interface connector .
Connecting an d Prin tin g 3-3 Inst alling the Printer Driver According to the instructions of the Installation Guide, connect the PC to the printer and turn on them to install the p rinter driver . For more information on printer driver , refer to the KX Driver User Guide .
3-4 Connecting and Printin g Express Mode When selecting Express Mode , printer driver and fonts are installed. After inst allting with this mode, the other utilities can be added using Custom Mode . 1 On Installation Method screen, click Express Mode .
Connecting an d Prin tin g 3-5 Custom Mode When selecting Custom Mode , printer port and utilities are changed as necessary . 1 On Installation Method screen, click Custom Mode . 2 On Driver t ab and Utility tab of the Custom Installation screen, select the printer driver and utilities you want to install, and click Next .
3-6 Connecting and Printin g Inst alling the Printe r Driver on Mac OS This section explains how to install the printer driver in Mac OS. 1 Ensure the printer is connected to the computer's USB or Network port before installing software from the CD-ROM.
Connecting an d Prin tin g 3-7 Printing This section explains the printing procedure from an application software. Y ou ca n specify the printing settings from each tab on KX Driver . KX Driver is stored in the CD-ROM (Product Library) . For more information, refer to the KX Driver User Guide .
3-8 Connecting and Printin g Manual Duplex (For FS-1 100 only) Use Manual Duplex if you require printing on both sides of the paper . The even pages are printed first and then reloade d to print the odd pages. An instruction sheet is available to assist with loading the sheet s in the correct orientation and order .
Connecting an d Prin tin g 3-9 5 Load the even pages printed into the p aper cassette with the instruction sheet facing up and the arrows pointing toward the printer . 6 Select OK on the Manual Duplex instruction message box. All the odd pages will be printed.
3-10 Connecting and Printin g St atus Monitor The S tatus Monitor monitors the printer st atus and provides an ongoing reporting function. It also allows you to specify and modify settings for printers not included in the KX driver . The S tatus Monitor is inst alled automatically during KX driver inst allation.
Connecting an d Prin tin g 3-1 1 If an information notification event occurs, the 3D view and an alert sound are used to notify you. For information on the sound notification settings, refer to S tatus Monitor Settings on p age 3-12 .
3-12 Connecting and Printin g St atus Monitor Settings The S t atus Monitor has two tabs to configure its settings. Use the Preference opti on to set up the S tatus Monitor . Sound Notification T ab The Event Notification tab cont ains the following items.
Connecting an d Prin tin g 3-13 Appearance T ab The Appearance tab is contains the following items. Enlarge window Doubles the size of the S tatus Monitor window . Always on top Positions the St atus Monitor in front of other active windows. T ransparency Displays the St atus Monitor as a transp arent window .
3-14 Connecting and Printin g Configuration T ool The Configuration T ool allows you to check and/or change the settings for printers not included in the KX driver . The Configuration T ool can be used for printers connected to the PC via a USB cable .
Connecting an d Prin tin g 3-15 Statu s T a b The S t atus tab displays current information about the device, such as the model name, system firmware, engine firmware, serial number , total memory , and number of printed pages.
3-16 Connecting and Printin g Printer T ab The Printer tab allows you to set print processing p arameters that are not available in the KX driver . As well as the form feed timeout, you can change the memory size used for processing raster dat a such as bitmap and JPEG files.
Connecting an d Prin tin g 3-17 Others T ab The Others tab enables you to configure the print er settings shown below . Item Description Auto sleep Configures the amount of time when the printer automatically enters Sleep Mode. Click Advanced to turn Auto sleep On or Off .
3-18 Connecting and Printin g Uninst alling Sof tware The CD-ROM lets you remove the printer sof tware . 1 Click Remove Software . The Kyocera Uninst all er appears. 2 Select the software p ackage to remove. 3 Click Uninstall . The uninstaller start s.
Maintenanc e 4-1 4 Maintenance This chapter explains how to replace the toner container and clean the printer . General Information 4-2 T oner Cont ainer Re placement 4-2 Cleaning t he Printer 4-6 Pro.
4-2 Maintenance General Information This chapter describes basic maintenance tasks you can perform for the printer . Y ou can replace the toner container according to the printer's status: Also, the internal part s need periodic cleaning.
Maintenanc e 4-3 Replacing the T oner Con t ainer This section explains how to replace the toner container . 1 Open the top cover . 2 Tu r n lock lever to the unlock position. Push lock lever to the position marked arrow and pull out the toner container .
4-4 Maintenance 3 T ake the new toner container ou t of the toner kit. Shake the new toner container at least 5 times as shown in the figure in order to distribute the toner evenly inside the container . 4 Remove the label from the toner cont ainer . 5 Install the new toner container in the printer .
Maintenanc e 4-5 6 Tu r n lock lever to the lock position. 7 Close the top cover ..
4-6 Maintenance Cleaning the Printer T o avoid print quality problems, the interior of the printer must be cleaned with every toner container replacement. 1 Open the top cover and front cover . 2 Lift the process unit together with the toner cont ainer out of the printer .
Maintenanc e 4-7 4 Place the drum unit flat on a clean, level surface. 5 Use a clean, lint free cloth to clean dust and dirt away from the metal registration roller . 6 Slide the charger cleaner (green) back and forth 2 or 3 times to clean the charger wire , then return it to its original position (CLEANER HOME POSITION ).
4-8 Maintenance 8 Return the process unit to its position, aligning the guides at both ends with the slots in the printer . Then, close the front cover and top cover .
Maintenanc e 4-9 Prolonged Non-Use and Moving the Printer Prolonged Non-use If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet. We recommend you consult with your dealer about the additional actions you should take to avoid possible damage that may occur when the printer is used next time.
4-10 Maintenance.
T roublesho oting 5-1 5 T r oubleshooting This chapter explains how to handle printer problems, understand indicator combinations, and clean paper jams .
5-2 T roubleshooting General Guidelines The table below provides basic solutions for problems you may encounter with the printer . We suggest you consult this table to troubleshoot the problems before calling for service repairs. Tips Printer problems may be solved easily by following the tips below .
T roublesho oting 5-3 Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer .
5-4 T roubleshooting Faint or blurred p rinting Check the toner container and if necessary replace. Refer to T oner Container Replacement on page 4-2 . Clean the charger wire . Refer to Cleaning the Printer on page 4-6 . Gray background Check the toner container and if necessary replace.
T roublesho oting 5-5 Underst anding Indicator s The indicator displays generally fall into one of three categories: normal operation, maintenance and errors (repairs). Click the icon to play the animation of the indicator combinations. Right-click an indicator , then select Playback and Play to play the animation repeatedly .
5-6 T roubleshooting The printer is receiving data. Printing resumes when the [GO] is pressed. The printer is printing the last page af ter waiting. Printing is possible. Offline status. Y ou cannot print, but the printe r can receive data. The printer returns to online st atus when the [GO] is pressed.
T roublesho oting 5-7 Maintenance Indication The table below shows the indicator combinations when user intervention is required. It is assumed that the printer is online and is processing data. Indicator Meaning Remedy There is no pape r in the cassette , MP tray , or Manual Feed .
5-8 T roubleshooting Error Indication If the indicators light or f lash repeat edly in mann ers not descr ibed above for normal or mainten ance indication, a service error has probably occurred . Turn the prin ter off by the power switch, wait 5 seconds and then turn the prin te r on again.
T roublesho oting 5-9 Cleaning Paper Jams If paper jams in the p aper transport system, or no p aper sheets are fed at all, the printer automatically goes offline, and the Jam indicator will light. S tatus Monitor or COMMAND CENTER can indicate the location of the paper jam (the component where the p aper jam has occurred).
5-10 T roubleshooting General considerations for clearing jams Bear in mind the following considerations when attempting paper jam removal: • If paper jams occur frequently , try using a different type of p aper , replace the paper with p aper from another ream, or flip the paper stack over .
T roublesho oting 5-1 1 Paper Cassette/Paper Feeder 1 Pull out the cassette or optional paper feeder . 2 Remove any partially fed p aper . 3 Push the casse tte back in securely . The printer warms up and resumes printing. IMPORTANT Do not try to remove paper that has already been partially fed.
5-12 T roubleshooting Duplexer Paper is jammed in the duplex section . Remove the jammed paper using the procedure given below . 1 Pull the paper cassette all the way out of the printer . 2 Open the duplexer's cover in front of the printer and remove any jammed paper .
T roublesho oting 5-13 Inside the Printer 1 Pull the paper cassette all the way out of the printe r . Remove any partially fed p aper .. 2 Open the top cover and front cover , and lift the process unit together with the toner contain er out of the printer .
5-14 T roubleshooting 5 Return the drum unit to its position, aligning the guides at both ends with the slots in the printer . 6 Insert the process unit together with the toner container , back into the machine. Close the top cover and the front cover .
T roublesho oting 5-15 Rear Cover 1 Open the rear cover and remove the jammed p aper by pulling it out. If the paper is jammed inside the fuser unit , open the fuser cover and remove the paper by pulling it out. 2 Close the rear cover , and open and close the top cover to clear the error .
5-16 T roubleshooting.
Option 6-1 6O p t i o n This chapter explains the options for this printer . General Information 6-2 Exp ansion Memory M odules 6-3 Paper Feeder (PF-10 0 ) 6-6 Network Interfac e Card (IB-23) 6-7 Comp.
6-2 Option General Information The printers have the following options available to satisfy your printing requirements. For instructions on installing individual options, refer to the documentation included with the option. Some options are explained in the following sections.
Option 6-3 Exp ansion Memory Modu les T o expand the printer memory for more complex print jobs and faster print speed, you can plug in optional memory module (dual in line memory module) in the memory slot provided on the printer main controller board.
6-4 Option Inst alling the Memory Module 1 T urn of f the printer and disconnect the power cord and printer cable . 2 Remove the right cover with a piece of metal similar to coin. 3 Remove the fixing tape in case of the first inst allation. Then, remo ve the memory slot cover as shown in the figure.
Option 6-5 7 The memory module is secured to the memory socket with the clamps. 8 Reinstall the memory slot cover and the right cover . Removing a Memory Module To r e m o v e a memory module , remove the right cover and the memory slot cover from the printer .
6-6 Option Paper Feeder (PF-100 ) The PF-100 allows you to add one (for FS-1 100) or two (for FS-1300D) more paper cassette to the bottom of the printer for continuous feeding of a large volume of paper . Each paper cassette can hold up to approximately 250 sheets of ISO A4, ISO A5, JIS B5, Letter , or Legal size (80g/m 2 ) paper .
Option 6-7 Network Interface Card (IB-23) The network interface card supports TCP/IP , IPX/SPX, NetBEUI and AppleT alk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetW are, etc.
6-8 Option Comp actFlash (CF) Card The printer is equipped with a slot for a CF card with the maximum size of 256MB. A CF card is useful for storing fonts, macros, and overlays. 1 T urn of f the printer and disconnect the power cord and printer cable .
Option 6-9 4 Insert the CF Card . 5 Secure it with the screws removed in step 3. 6 Connect the power cord and printer cable and turn on the printer ..
6-10 Option.
Appendix 7-1 7 A ppendix This section lists the specif ications of this printer . Specifications 7-2 Environment al St andard Requirements 7-4.
7-2 Appendix Specifications Note These specifications are subject to change without notice. Item Description FS-1 100 FS-1300D T ype Desktop Printing Method Electrophotography , laser scan Paper Weigh.
Appendix 7-3 Continuous printing 1 to 999 sheets Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 d pi Monthly Duty A verage 1,500 pages Maximum 15,000 pages Operating Environment T emperature 10 to 32.
7-4 Appendix Environment al S t andard Requirement s This machine conforms to the following environmental st andard requirements. • T ime for switching to Sleep mode (default): 15 minutes • Duplex.
Index-1 Inde x A Adhesive label ......... .............. .............. ............ ........... ..... 2-7 Attention indicator operation pa nel ........................ .............. ................. .. 1-4 C CF card ............... .............. .
Index-2 components ... ................. ................. ................. ........1-2 loading paper .................. ................. .............. .........2-14 minimum and maximum paper sizes ................... .....2-3 paper sizes .........
Index-3 USB interface connector components ...... ................. .............. ................. ........ 1-3 T ips ............ .............. .............. .............. .............. .............. 5-2 Understanding indicat or s ............
Index-4.
E1.
.
TURKEY Çalıştırma Kılavuzu KM-2560 KM-3060.
An important point after buying a device Kyocera FS-1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kyocera FS-1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kyocera FS-1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kyocera FS-1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Kyocera FS-1100 will certainly help you make a decision on the purchase.
If you already are a holder of Kyocera FS-1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kyocera FS-1100.
However, one of the most important roles played by the user manual is to help in solving problems with Kyocera FS-1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kyocera FS-1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
