Instruction/ maintenance manual of the product 1000E Kyocera
Go to page of 19
R EcoLAN 1000E Quick Configur ation Guide Network Connectivity for the DP-2800 Printer Alwa ys read this Quick Configur ation Guide thourghly bef ore use. After reading, maintain it in good condition and keep it together with the Quic k Configuration Guide for y our Laser Printer .
FCC Notice: This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Introduction The EcoLAN 1000E is an internal network interface card designed specifically for the DP-2800 printer . The EcoLAN 1000E features include: ❒ 10 Mbps Ethernet Interface ❒ 10BaseT / 10Ba.
T rademarks Kyocera ® is a registered trademark of Kyocera Corporation. NetWare ® is a registered trademark of Novell, Incorporated. Windows ® is a registered trade- mark of Microsoft Corporation. Macintosh ® is a registered trademark of Apple Computer, Incorporated.
Contents NetW are 4.x Directory Services Configuration ................ 1 NetW are 2.x & 3.x Configuration ....................................... 5 Windows 95 Peer to Peer Printing Configuration ............ 7 Windows NT Configuration ...........
NetW are 4.x Directory Services Configuration Bindery vs. NDS Setup In addition to its native NDS (NetWare Directory Services), NetW are 4.x can also be used in Bindery emulation. Bindery emulation is provided on the 1000E for users more familiar with the NetW are Bindery than with NDS.
3. Define the Print Server , Printer , and Queue. ➪ Select Quick Setup to display the Print Services Quick Setup screen. Note: If you do not have sufficient rights to create objects in this context, Quick Setup will not appear on the menu. Y ou must have the Object Create right in order to add Print Services.
3. Password Protection. Many of the configuration options in the MAP utility are password protected. The default password is: sysadm The password is case sensitive. T o change the password, select Change Password in the System column. 4. NetW are Configuration.
NetW are 2.x & 3.x Configuration 1. Login as Supervisor and start PCONSOLE. 2. Define the Print Queue. ➪ If a Print Queue already exists which will be assigned to the 1000E, skip to step 3. ➪ Select Print Queue Information from the Available Options menu.
6. Confirm Successful Configuration. ➪ T urn the printer off and on and wait for a powerup network status page to print. If the network is large, the powerup status page may take several minutes to print. (Note: This time may be reduced by setting a Preferred File Server for the 1000E with the Management Access Program.
Windows 95 Peer to Peer Printing Configuration What is Windows 95 Peer to Peer Printing The peer to peer printing software which is included with the EcoLAN 1000E allows Windows 95 PCs to communicate directly with network attached printers. A network server , such as NetWare or Windows NT , is not required for peer to peer printing.
IPX Protocol Installation The IPX protocol is required for peer to peer printing. IPX is not installed by default when Windows 95 is first installed, but it can be easily added using the following procedure. 1. Click on the Windows 95 Start button and select Settings , Control Panel , Network .
Windows NT Configuration There are several options for setting up printing in a Windows NT environment. ◆ If a NetWare server is present, NetW are print services may be used by following the NetW are configuration instructions in this guide.
Windows NT 4.0 1. Click on the Windows Start button, select Settings , and Control Panel . 2. Double click on Network and select the Protocols tab. If TCP/IP Protocol is not in the list of Network Protocols, click on Add to install it. 3. Select the Services tab.
10 Setting Up LPR Printing If the printer driver has not already been installed, please install it from the CD which is shipped with the printer before continuing. In the following instructions, some field or dialog names may be vary depending upon the NT release pack in use.
Macintosh Configuration For Macintosh compatibility , Mita printers must be equipped with the KPDL II PostScript option. Installing the Driver and Selecting the Printer 1.
UNIX Configuration UNIX printing utilizes a line printer daemon (lpd) to direct print jobs to the printer . The 1000E supports two modes of lpd printing, host-based lpd and printer-based lpd. With host-based lpd, the line printer daemon is run on one or more workstations (hosts) where print jobs are accepted and sent to the 1000E.
arp -s <desired_IP_address> <1000E_ethernet_address> The 1000E ethernet address is listed on the network status page as Network Address. For example, arp -s 197.42.211.5 00:40:AF:13:A2:70 4. At the UNIX command prompt, type: ping <desired_IP_address> For example, ping 197.
Published in June ‘98.
An important point after buying a device Kyocera 1000E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kyocera 1000E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kyocera 1000E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kyocera 1000E you will learn all the available features of the product, as well as information on its operation. The information that you get Kyocera 1000E will certainly help you make a decision on the purchase.
If you already are a holder of Kyocera 1000E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kyocera 1000E.
However, one of the most important roles played by the user manual is to help in solving problems with Kyocera 1000E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kyocera 1000E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
