Instruction/ maintenance manual of the product 800-553-5953 Kwik Tek
Go to page of 27
SGH SEAT GRINDER KW Products Inc. 800-553-5953 500 57 th Street, Marion, IA 52302 USA Copyright 2 003. All Rights Re served Equipment specifications, options and accessories subject to change without Purchaser's Warranty KW Products Inc. 500 57th Street Marion, IA 52302 USA KW Products Inc.
.
SGF SEAT GRINDER PURCHASER'S WARRANTY KW Products Inc. guarantees all parts of its equipment, to the original purchaser, for one full year from date of recorded warranty (except as provided below) against defects in material or workmanship when the equipm ent is installed in strict accordance with pertinent specifications and procedures.
.
SGF SEAT GRINDER RECEIVING SHIPMENT Upon taking delivery of your machine, carefully inspect the assembly before removing the crating and packing materials. If evidence of damage exists, contact the shipper and KW Products Inc. immediately. Although KW Products Inc.
SGF SEAT GRINDER SAFETY FIRST This manual has been prepared for the owner and those responsible for the maintenance of this machine. It’s purpose aside from proper maintenance an d operations, is to promote safety through the use of accepted practice.
SGF SEAT GRINDER SAFETY INSTRUCTIONS 1. Read, understand and follow the safety and opera t ing instructions found in this manual. Know the limitations and hazards associ ated with operating the machine. 2. Eye Safety: Wear an approved safety face sh ield, gog gles or safety glasses to protect eyes when operating the machine.
SGF SEAT GRINDER SAFETY GUIDE FOR SEAT GRINDER WHEELS (Read before installing the Wheel) Importance of Proper Machine M aintenance The most common cause of wheel breakage is due to improper mounting and abusive and/or careless operation.
SGF SEAT GRINDER WHEEL DRESSER SET-UP 1. Loosen handle #3 and rotate the p ointer line until it aligns to the index angle desired and retighten. 2. After attaching the correct grinding wheel to the grinder unit, carefully lower the grinder unit onto the dresser arbor item #1 3.
SGF SEAT GRINDER DRESSING OR TRUING THE VALVE SEAT WHEEL It is necessary to true or dress seat wheels that have become dull or loaded, or have lost their form (angle). To obtain the best possible dress, observe the following. 1. Feed the diamond into the wheel very slowly until the diamond just touches the wheel.
SGF SEAT GRINDER WHEEL TIGHTENING In case the grinding wheel should stick on the grinder unit, t ake the wooden blocks from the box and use them as shown below. In doing this, be sure to place the blocks up close to the wheel (within 1/8”) so the pressure will be taken by the bearing area of the unit rather than by the thin wall in the center.
SGF SEAT GRINDER SEAT GRINDING In preparation for grinding valve seats the following should be observed: 1. Select the correct arbor for the valve guide. The correct arbo r should extend approximately 2 3/4" above the valve seat. 2. Pass the stem end of the arbor through an oily shop towel.
SGF SEAT GRINDER VALVE PRINTS The above illustrations provide guidelines to correct seat width and location. Seat width should be to manufacturer specifications and seat run-out sho uld be as close to 0 as possible. Maximum not to exceed .002 on 1.5” seats or larger and .
SGF SEAT GRINDER MAINTENANCE Your Kwik-Way SGF Seat Grinder is designed to require minimal maint enance. However, some basic maintenance assures the unit will continue to operate in a sati sfactory manner. 1. The motor features permanently sealed bearings that require no routine oiling.
SGF SEAT GRINDER HELPFUL HINTS A. PRELIMINARY 1. Be sure to remove the carbon from the valve seats, the ports, and be sure to clean the valve stem guides. 2. It is good practice to pass the stem of the arbor through an oily cloth both before and after use.
SGF SEAT GRINDER STRAIGHT DRIVE ASSEMBLY REF# PART # DESCRIPTION REQ’D 1 000-0342-74 6-32 x 5/16 Round Head Machine Screw – N.S. 2 2 000-1400-23 Tolerance Ring 1 3 000-1820-44 Loading Spring 1 4 000-1605-39 Bearing 3 5 000-7300-25 #2 Woodruff Key – N.
SGF SEAT GRINDER MOTOR HOUSING ASSEMBLY KW Products Inc. 800-553-5953 14. 500 57 th Street, Marion, IA 52302 USA Copyright 2004 All Rights R eserved Equipment specifications, options and accessories s.
SGF SEAT GRINDER MOTOR ASSEMBLY REF#. PART # DESCRIPTION 115V 9,500 RPM 115V 11,500 RPM 230V 9,500 RPM 230V 11,500 RPM 1 000-1261-01 16-3 SJO Cord Set (8'-6") (115V 1 1 1 000-1261-28 16-3 SJ.
SGF SEAT GRINDER FLEX GRINDER UNIT WITHOUT STABILIZER REF# PART # DESCRIPTION REQ’D 1 031-0317-53 Inner Sleeve Key 1 2 031-0315-83 Spring Retainer 1 3 031-0315-16 Garter Spring 1 4 031-0315-08 Inner.
SGF SEAT GRINDER ARBOR PULLER ASSEMBLY – 7/16 & 13/32 REF # PART # DESCRIPTION REQ’D 1 000-0485-18 1/4-20 x 1/4 Socket Cup Point Set Screw 1 2 000-1802-46 Compression Spring 1 3 000-7204-70 1/.
SGF SEAT GRINDER ECCENTRIMETER ASSEMBLY REF # PART # DESCRIPTION REQ’D 1 000-0400-10 8-32 X 1/8 Headless Set Screw 3 2 049-0145-20 Finger Nut 1 3 000-0760-40 Thumb Screw 1 4 049-0342-61 Finger Holder 1 5 000-0205-75 10-32 x 1/4 Round Head Machine Screw Z.
SGF SEAT GRINDER BRAKE ASSEMBLY REF # PART # DESCRIPTION REQ’D 1 031-3017-00 End Cap Sleeve 1 2 031-0189-35 Inner Brake Ring 1 3 031-3018-07 Outer Brake Collar 1 4 031-0190-36 Brake Pin 2 KW Products Inc.
SGF SEAT GRINDER HEAVY DUTY WHEEL DRESSER ASSEMBLY (031-1900-02) NOTE: Part numbers marked (*) are part of Item #17 and are listed for service only. KW Products Inc.
SGF SEAT GRINDER HEAVY DUTY WHEEL DRESSER ASSEMBLY R£FNO. PA RT # DESCRIPTION REQ'D 1 031-1901-00 Base 1 2 031-1916-1 0 Diamond Holder Assembly 1 3 000-0485-1 8 1/4-20 x 1/4 Cup Point Socket Set.
SGF SEAT GRINDER STABILIZER ASSEMBLY REF # PART # DESCRIPTION REQ’D 1 031-0126-78 Stabilizer 1 2 031-0127-67 Stabilizer Bushing 1 KW Products Inc. 800-553-5953 22.
SGF SEAT GRINDER TROUBLE SHOOTING CONDITIONS POSSIBLE CAUSES Rough finish on grinding wheel Truing cut too heavy or travel of diamond too quick Damaged diamond Frequent redressing of grinding wheel n .
KW Products Inc. 500 57 th St., Marion, IA 52302 USA 319/377-9421 319/377-9101 (FAX) 800/553-5953 www.kwik-way.com service@kwik-way.com.
An important point after buying a device Kwik Tek 800-553-5953 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kwik Tek 800-553-5953 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kwik Tek 800-553-5953 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kwik Tek 800-553-5953 you will learn all the available features of the product, as well as information on its operation. The information that you get Kwik Tek 800-553-5953 will certainly help you make a decision on the purchase.
If you already are a holder of Kwik Tek 800-553-5953, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kwik Tek 800-553-5953.
However, one of the most important roles played by the user manual is to help in solving problems with Kwik Tek 800-553-5953. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kwik Tek 800-553-5953 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
