Instruction/ maintenance manual of the product Profile System Two Kustom
Go to page of 20
OWNER’S MANUAL Congratulations on the purchase of your new Kustom Profile System T wo; a port able and powerful stereo P .A. System. Y our new system of fers unsurpassed sound quality as well as out standing performance characteristics. Inside this manual you’ll find detailed information regarding the system’ s many features.
2 ENGLISH Danger Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.
3 DURE EN HEURES P AR JOUR INIVEAU SONORE CONTINU EN dB Danger L‘exposition a des niveaux eleves de bruit peut provoquer une perte permanente de l’audition, Chaque organisme humain reagit differem.
4 T able of Content s Profile System T wo Contents 5 Optional Accessories 5 Profile System T wo Features 5 Setup Diagram A - Mixer Front 6 Setup Diagram B - Mixer Back 7 Setup Diagram C - S peaker Cab.
5 Profile System T wo Content s These items are included with your Profile System T wo: • (1) 300-W att S tereo Powered Mixer • (2) Line Array S peaker Cabinets • (2) 25-Foot S peaker Cables •.
SETUP DIAGRAM A MIXER FRONT 6.
SETUP DIAGRAM B MIXER BACK 7.
SETUP DIAGRAM C SPEAKER CABINET BACK 8 Speaker Input Jack ( Y ) This jack is used to connect the S peaker Output Jack ( R or W ) to the speaker . This should be connected with a good quality speaker cable.
Setup Instructions: Making Connections: • Using the Profile speaker cables, or a set of your own, connect an end of each cable into the speaker outputs of the mixer ( R & W ). Then connect the opposite end of each cable to the appropriate speaker cabinet input ( Y ).
10 About the Master Section The master section gives you final control over the sum of what is happening in the input section. In other words, the adjustments you make in this section will af fect all channels evenly .
11 About the Input Section The input section is where you connect microphones, guitars, drum machines, keyboards, and other audio sources. Effect s Control ( A ) This control is used to send the signal from the individual channel to the digital effects.
12 CH 1~5 INPUT Left (mono) Right Line Out CH1~5 INPUT 1/4” MONO INSTRUMENT CABLE LINE LEVEL INSTRUMENT Method 1: Microphone using XLR balanced inputs - Methods for connecting input s to channels Method 2: Line level instrument using line input and a hi-z instrument cable- This method uses the mono line output through a hi-z instrument cable.
13 RING TIP Left (mono) Right Headphone Line Out KEYBOARD (or similar electronic instrument) Left Right CH 5 INPUT 1/4” STEREO ADAPTER 1/4” INSTRUMENT CABLES T i (le f) p t i n t R g (R ig h ) S l.
14 About the Output Section The output section (mixer back) is where you connect your speakers, recording equipment, and any other external sound conditioning device. Lef t Preamp Output ( N ) This jack can be used to connect the left output to an external audio device such as a power amp.
15 1. How many speakers can I use with the Profile T wo? 7. I get this nasty pop when turning the microphone ANSWER: Most speaker cabinets today ar e 8-ohms. switch on or off. What’ s wrong? For the sake of this question we will assume this is the ANSWER: The micr ophone or cor d is pr obably wir ed case.
16 Amplifier Loading Chart (each channel) Cabinet A ’s Impedance (ohms) Cabinet B’s Impedance T otal load on amplifier Note: T o prevent overheating and possible loss of signal, do not use any combination of cabinets that results in a box that is shaded.
17 - + L Preamp Out Jack RING (-) RING (Right) Phantom Power Phantom Power Phantom Power Line Line/Inst Microphone Microphone Mic/Line Input Jack Mic/Line(mono/stereo)-Inst.
18 Profile System T wo S pecifications M odel KPS- PM 300 6 Channel Dual P ow er ed Mix er 145W per c hannel 4 O hms @ 0. 1% T HD 150W per c hannel 4 O hms @ 1% T HD 170W per c hannel 4 O hms @ 5% T H.
19 W e: Kustom Musical Amplification Inc. 4940 Delhi Pike Cincinnati, OH 45238 T el: 1-513-451-5000 Fax: 1-513-347-2192 Declare that the product Product name: Kustom Product model number: Profile Syst.
Kustom Amplification Inc., 4940 Delhi Pike, Cincinnati, OH • USA (800) 999-5558 W eb: www .kustom.com ®.
An important point after buying a device Kustom Profile System Two (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kustom Profile System Two yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kustom Profile System Two - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kustom Profile System Two you will learn all the available features of the product, as well as information on its operation. The information that you get Kustom Profile System Two will certainly help you make a decision on the purchase.
If you already are a holder of Kustom Profile System Two, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kustom Profile System Two.
However, one of the most important roles played by the user manual is to help in solving problems with Kustom Profile System Two. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kustom Profile System Two along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
